MLFA Series Stackpole Electronics, Inc.
Transcription
MLFA Series Stackpole Electronics, Inc.
MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor – AEC-Q200 Qualified • • • • • • • • • • • Features: Resistive Product Solutions Thin Film Technology for precision and stability Excellent power to size ratio Outstanding pulse handling Excellent overall stability Sn termination on Ni barrier layer Tight tolerance down to ±0.1% Extremely low TCR down to ±15ppm/ºC High power rating up to 1 Watt SMD enabled structure AEC-Q200 compliance RoHS compliant / lead-free Electrical Specifications Type / Code Package Size MLFA25 Power Rating (Watts) @ 70ºC 0204 0.4W Maximum Working Voltage(1) Maximum Overload Voltage 200V 400V Resistance Temperature Coefficient Ohmic Range (Ω) and Tolerance 0.1% 0.5% 10 - 300K ±25 ppm/ºC 10 - 1M 10 - 1M ±50 ppm/ºC 1 - 1M 0.1 - 1M 10 - 300K ±15 ppm/ºC 0207 1W 350V 700V 5% 0.2 - 1M - ±100 ppm/ºC MLFA1 1% ±15 ppm/ºC 10 - 1M ±25 ppm/ºC 10 - 1M ±50 ppm/ºC 0.2 - 1M 1 - 1M - ±100 ppm/ºC 0.1 - 1M Mechanical Specifications Type / Code Weight (1000 pc) (g) MLFA25 18.7 MLFA1 80.9 L Body Length 0.138 ± 0.008 3.50 ± 0.20 D Body Diameter 0.055 ± 0.006 1.40 ± 0.15 K Termination 0.031 ± 0.004 0.80 ± 0.10 inches mm 0.232 ± 0.008 5.90 ± 0.20 0.087 ± 0.008 2.20 ± 0.20 0.051 ± 0.004 1.30 ± 0.10 inches mm Unit Operating Temperature Range: -55 ~ +155°C 100 -55ºC 70ºC Power Derating Curve: 80 60 40 20 155ºC 0 -60 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (ºC) Rev Date: 12/09/2015 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 1 www.seielect.com [email protected] MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor – AEC-Q200 Qualified Resistive Product Solutions Performance Characteristics Item Requirement Test Method JIS-C-5201-1 4.8 IEC-60115-1 4.8 -55ºC ~ +125ºC, 25ºC is the reference temperature JIS-C-5201-1 4.13 10Ω-270KΩ:±(0.1%+0.05Ω) IEC-60115-1 4.13 Short Time Overload RCWV*2.5 or max. overload voltage whichever is <10Ω&>270KΩ:±(0.15%+0.05Ω) lower for 5 seconds JIS-C-5201-1 4.6 Insulation Resistance ≥10G IEC-60115-1 4.6 Max. overload voltage for 1 minute JIS-C-5201-1 4.25 10Ω-270KΩ:±(0.25%+0.05Ω) IEC-60115-1 4.25.1 Endurance <10Ω&>270KΩ:±(0.5%+0.05Ω) 70 ± 2ºC, RCWV for 1000 h. with 1.5 h. "ON" and 0.5 h. "OFF" 10Ω-270KΩ:±(0.5%+0.05Ω) MIL-STD-202 Method 103 Biased Humidity <10Ω&>270KΩ:±(1%+0.05Ω) 1000 h 85°C/85% RH 10% of operating power 10Ω-270KΩ:±(0.25%+0.05Ω) MIL-STD-202 Method 108 High Temperature Exposure <10Ω&>270KΩ:±(0.5%+0.05Ω) at +155°C for 1000 h JIS-C-5201-1 4.33 Bending Strength 10Ω-270KΩ:±(0.1%+0.05Ω) IEC-60115-1 4.33 <10Ω&>270KΩ:±(0.5%+0.05Ω) Bending once for 5 seconds with 2mm JIS-C-5201-1 4.17 Solderability 95% min. coverage IEC-60115-1 4.17 245 ± 5ºC for 3 seconds JIS-C-5201-1 4.18 Resistance to Soldering Heat 10Ω-270KΩ:±(0.1%+0.05Ω) IEC-60115-1 4.18 <10Ω&>270KΩ:±(0.25%+0.05Ω) 260 ± 5ºC for 10 seconds JIS-C-5201-1 4.7 Voltage Proof No breakdown or flashover IEC-60115-1 4.7 1.42 times max. operating voltage for 1 minute JIS-C-5201-1 4.18 Leaching Individual leaching area ≤5% IEC-60068-2-58 8.2.1 Total leaching area ≤10% 260 ± 5ºC for 30 seconds 10Ω-270KΩ:±(0.25%+0.05Ω) JESD22 Method JA-104 Temperature Cycling <10Ω&>270KΩ:±(0.5%+0.05Ω) -55°C to + 125°C, 1000 cycles MIL-STD-202 Method 213 Mechanical Shock ±(0.25%+0.05 Ω) Wave Form: Tolerance for half sine shock pulse. Peak value is 100g's. Normal duration (D) is 6. MIL-STD-202 Method 204 Vibration ±(0.25%+0.05 Ω) 5 g's for 20 m., 12 cycles each of 3 orientations, 10-2000 Hz AEC-Q200-002 ESD ±(0.5%+0.05 Ω) Human body, 2KV MIL-STD-202 Method 215 Resistance to Solvents Marking legible Add aqueous wash chemical - OKEM clean or equivalent. Do not use banned solvents. AEC-Q200-006 Terminal Strength No broken Force of 1.8 Kg for 60 seconds No ignition of the tissue paper or UL-94 Flammability scorching of the pinewood board V-0 or V-1 are acceptable. Electrical test not required. RCWV (rated continuous working voltage) = √(P*R) or max. operating voltage whichever is lower. Storage temperature: 25 ± 3ºC, humidity < 80% R.H. Temperature Coefficient of Resistance (T.C.R.) As specified Rev Date: 12/09/2015 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 2 www.seielect.com [email protected] MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor – AEC-Q200 Qualified Resistive Product Solutions Reel Specification øA Type / Code 7.028 178.50 7.028 178.50 MLFA25 MLFA1 ± ± ± ± øB 0.059 1.50 0.059 1.50 2.362 60.00 2.362 60.00 ± ± ± ± øC 0.039 1.00 0.039 1.00 0.512 13.00 0.512 13.00 ± ± ± ± W 0.008 0.20 0.020 0.50 0.354 9.00 0.512 13.00 ± ± ± ± T 0.020 0.50 0.020 0.50 0.492 12.50 0.610 15.50 ± ± ± ± Unit 0.020 0.50 0.020 0.50 inches mm inches mm Emboss Plastic Tape Specification Type / Code MLFA25 MLFA1 A 0.061 1.55 0.094 2.40 Type / Code MLFA25 MLFA1 ± ± ± ± B 0.004 0.10 0.004 0.10 0.144 3.65 0.242 6.15 0.004 0.10 0.004 0.10 0.079 2.00 0.079 2.00 P1 0.157 4.00 0.157 4.00 ± ± ± ± ± ± ± ± W 0.004 0.10 0.004 0.10 0.315 8.00 0.472 12.00 0.002 0.05 0.002 0.05 0.059 1.50 0.059 1.50 P2 ± ± ± ± ± ± ± ± E 0.004 0.10 0.004 0.10 D0 ± ± ± ± 0.069 1.75 0.069 1.75 ± ± ± ± F 0.004 0.10 0.004 0.10 0.138 3.50 0.217 5.50 ± ± ± ± min. min. min. min. 0.071 1.80 0.106 2.70 ± ± ± ± D1 0.004 0.10 0.004 0.10 0.035 0.90 0.055 1.40 P0 0.002 0.05 0.002 0.05 T 0.157 4.00 0.157 4.00 ± ± ± ± Unit 0.004 0.10 0.004 0.10 inches mm inches mm Unit 0.004 0.10 0.004 0.10 inches mm inches mm Recommended Land Pattern Type / Code MLFA25 MLFA1 A 0.063 1.60 0.118 3.00 B 0.047 1.20 0.067 1.70 Rev Date: 12/09/2015 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. C 0.063 1.60 0.094 2.40 3 Unit inches mm inches mm www.seielect.com [email protected] MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor – AEC-Q200 Qualified Resistive Product Solutions Soldering Condition: (1) Time of IR reflow soldering at maximum temperature point 260°C : 10s (2) Time of wave soldering at maximum temperature point 260°C : 10s (3) Time of soldering iron at maximum temperature point 410°C : 5s How to Order 1 2 3 4 5 6 7 8 10 11 12 13 14 M L F A 2 5 F T S 1 0 0 K Product Series MLFA Size 25 1 Power 0.4W 1W Code B D F J Tolerance Tol Value 0.1% E96, E24 0.5% 1% 5% E24 Rev Date: 12/09/2015 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. Code T 4 Packaging Description Size 7" Reel 25 1 Plastic Tape Quantity 3,000 2,000 TCR Code ppm S 15 E 25 C 50 100 D Resistance Value Four characters with the multiplier used as the decimal holder. 1 ohm = 1R00 100 Kohm = 100K 1 Mohm = 1M00 www.seielect.com [email protected] MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor – AEC-Q200 Qualified Resistive Product Solutions Pulse withstanding capacity The single impulse graph is the result of 50 impulses of rectangular shape applied at one-minute intervals. The limit of acceptance was a shift in resistance of less than 1% from the initial value. The power applied was subject to the restrictions of the maximum permissible impulse voltage graph shown. MLFA Series Single Pulse (100 Ohm) Continuous Pulse The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average power dissipated in the resistor was equal to its rated power at 70ºC. Again the limit of acceptance was a shift in resistance of less than 1% from the initial value. MLFA Series Continuous Pulse (100 Ohm) Rev Date: 12/09/2015 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 5 www.seielect.com [email protected] MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor – AEC-Q200 Qualified Resistive Product Solutions MLFA Series Pulse Voltage (100 Ohm) Frequency behavior Resistors are designed to function according to Ohmic laws. This is basically true of resistors for frequencies up to 100 kHz. At higher frequencies, there is an additional contribution to the impedance by an ideal resistor switched in series with a coil and both switched parallel to a capacitor. The values of the capacitance and inductance are mainly determined by the dimensions of the terminations and the conductive path length. The environment surrounding components has a large influence on the behavior of the component on the printed-circuit board. Frequency versus Impedance MLFA25 Rev Date: 12/09/2015 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 6 www.seielect.com [email protected] MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor – AEC-Q200 Qualified Resistive Product Solutions Frequency versus Phase Angle MLFA25 Frequency versus Impedance MLFA1 Rev Date: 12/09/2015 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 7 www.seielect.com [email protected] MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor – AEC-Q200 Qualified Resistive Product Solutions Frequency versus Phase Angle MLFA1 Lightning Surge Resistors are tested in accordance with IEC 60 115-1 using both 1.2/50us and 10/700us pulse shapes. The limit of acceptance is a shift in resistance of less than 0.5% from the initial value. 1.2/50μs Lightning Surge Rev Date: 12/09/2015 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 8 www.seielect.com [email protected] MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor – AEC-Q200 Qualified Resistive Product Solutions 10/700μs Lightning Surge Rev Date: 12/09/2015 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 9 www.seielect.com [email protected]