BRAND NEW INFORMATION A new challenge for ADVAN Racing

BRAND NEW INFORMATION
A new challenge for ADVAN Racing
(on sale spring 2009)
ADVAN Racing wheels are known for their full-face design, but now the brand has taken on a new challenge in design. We designed a wheel
to make the outside rim as deep as possible, with the spokes rising and bowing in sweeping curves to assure clearance for brake callipers
and insets. However, the new wheel must retain the beauty of function that ADVAN Racing’
s spoke wheels are famous for. The new wheels
are designed as one-piece models with superior characteristics such as light weight and high rigidity. The new wheels, called“RS-D”
, were
marketed only after clearing all the requirements set by ADVAN Racing DNA. “D” of course stands for deep rim. We found it difficult to
design a deep one-piece rim in several sizes with a single depth of the rim. So, with RS-D, we designed a standard deep model and an extra
deep model for each inch. This required two different types of moulds to produce these full-size variations. The rims come in inch sizes
between 18 and 20 inches. The extra deep models have rims which are 60mm deep or more. In addition to this deep rim, each wheel is
diamond-polished for an incomparable finish (except for the Bright Chrome version). The technology that gives ADVAN Racing wheels their
unfailing quality has been enhanced for even higher quality and finish. With RS-D, we take our high-quality casting to the summit.
Immediately after the molten aluminium is poured, the wheel is cooled down rapidly to solidify the aluminium under computer control that
includes complete simulation with leading-edge cooling solidifying analysis. The newest moulds which have full water jackets ensure the
cooling process perfectly matches our computer simulation and analysis and result in a superior aluminium composition.
The important disk design is of course based on the 10-spoke RS. The design work takes special care with the starting angle of the spokes
so they don’
t spoil the sense of rim depth. Also, with standard deep rims, the design assures enough room for large brake callipers and has
spokes which do not protrude beyond the edge of the rim flange, and yet does not spoil the dynamic effect of the overall disk.
The ADVAN RS-D is available in three colour versions: Black Disc and Diamond Cut Rim which is ADVAN Racing’
s newest colour, the
classic RS Silver Disc & Diamond Cut Rim, and Bright Chrome versions. All use a special clear coating that adds depth and superior texture
to the finished look. The embossed ADVAN Racing trademark and RS-D are on the wheels and except for Bright Chrome the surface of the
letters is ground. So, especially with The Black finish, the contrast between the aluminium metal and the colour is remarkable. The RS-D
logo sticker that owners can apply themselves which has been used since the first RZ wheels comes with the wheel. Compared to decals,
the stickers have a thicker feel that adds impact to the letters.
MACHINING&BLACK / EXTRA DEEP
● High-quality one-piece cast 10-spoke design.
● Cast and flow-formed inner rim
● Two wheel types set for each inch size, standard deep and extra deep.
● ADVAN Racing logo is engraved between spokes and rim and given three-dimensional milling after the coating process.
● ADVAN Racing RS-D logo stickers for the spokes come with each wheel.
for European CAR SIZE LIST
RIM SIZE
18×7.5J
18×8.0J
18×8.5J
18×9.5J
19×8.5J
19×9.0J
19×9.5J
19×10.0J
20×9.0J
20×10.5J
PCD(mm)
100.0
112.0
112.0
120.0
120.0
120.0
112.0
120.0
120.0
112.0
120.0
120.0
120.0
120.0
HOLE
4
5
5
5
5
5
5
5
5
5
5
5
5
5
for Japanese CAR SIZE LIST
IN SET(mm)
RIM(TIRE FIT)
RIM DEPTH(mm)
BORE(mm)
42
48
45
＊35
＊35/＊25
35
48
22
35
29
25
20
17
25
S(F)
S(F)
S(F)
S(F)
E(R)
S(F)
S(F)
E(R)
E(R)
E(R)
E(R)
E(R)
E(R)
E(R)
39
39
39
39
63.5
40.5
40.5
65
65
65
65
65
77
77
φ63
φ66.5
φ66.5
φ72.5
φ72.5
φ72.5
φ66.5
φ72.5
φ72.5
φ66.5
φ72.5
φ72.5
φ72.5
φ72.5
■Colours: MACHINING & SILVER, MACHINING & BLACK, BRIGHT CHROME (＊Not available)
■Rim (tire fit) S: Standard Deep E: Extra Deep
(F): Front Tire Fit (R): Reverse Mount
■Without Centre Ornament
■Available as a separate accessory-ADVAN Racing Centre Ornament
■Bore diameter is the diameter on the car.
Design diameter is φ63 for PCD100/112 and φ73 for PCD120.
■Mini’s hub fit requires separately sold accessory hub colour (Z8055 φ63→56.1).
■Audi’s / Golf V’s hub fit requires separately sold accessory hub colour (Z5864 φ66.5→57.1).
■Nut holes are all M14
MACHINING&SILVER
RIM SIZE
PCD(mm)
18×8.5J
100.0
114.3
114.3
100.0
114.3
18×9.0J
114.3
18×10.0J
19×8.5J
114.3
114.3
19×9.0J
114.3
19×9.5J
19×10.0J
20×8.5J
20×9.0J
20×9.5J
20×10.0J
20×10.5J
114.3
114.3
114.3
114.3
114.3
114.3
114.3
18×7.5J
18×8.0J
HOLE
4(M14)
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
IN SET(mm) RIM(TIRE FIT) RIM DEPTH(mm)
42
48
45/37
47
51/31
45/35
25
35/25
45/38
35
25
45
35/25/15
38
25
40
35/25
20
S(F)
S(F)
S(F)
S(F)
S(F)
S(F)
E(R)
E(R)
S(F)
S(F)
E(R)
S(F)
E(R)
S(R)
E(R)
S(R)
E(R)
E(R)
39
39
39
39
39
39
63.5
63.5
40.5
40.5
65
40.5
65
48.5
77
48.5
77
77
■Colours: MACHINING & SILVER, MACHINING & BLACK, BRIGHT CHROME
■Rim (tire fit) S: Standard Deep E: Extra Deep
(F): Front Tire Fit (R): Reverse Mount
■Without Centre Ornament
■Available as a separate accessory-ADVAN Racing Centre Ornament
MACHINING&BLACK
BRIGHT CHROME
MACHINING&BLACK / STANDARD DEEP
21
22
R35 GTR tuned by HKS Kansai
ADVAN Racing RS-D MACHINING&BLACK
(F;STANDARD DEEP R;EXTRA DEEP)
BMW M3 tuned by VERTICE DESIGN
ADVAN Racing RS-D MACHINING&BLACK
(EXTRA DEEP)
(ADVAN Racing RS CAP RING φ73 BMW putting on the wheel,original ornament not included )
FAIRLADY Z(Z34) tuned by HKS
ADVAN Racing RS-D MACHINING&BLACK
(F;STANDARD DEEP R;EXTRA DEEP)
23
IMPREZA tuned by JUN AUTO MECHANIC
ADVAN Racing RS-D BRIGHT CHROME
(STANDARD DEEP)
24