Marble Arms - Waffen Ferkinghoff

Transcription

M
A
®
Marble
Arms
The Leader in Iron Gun Sights
420 Industrial Drive
Gladstone MI 49837
906-428-3710
www.marblearms.com
M
A
Marbles® Front Sights
®
Marble
Arms
Contour Front Sights
The Marble’s® front sight, with its unique
contour, has set the standard since 1900. These
magnificent front sights are the number one choice of
precision shooters and serious hunters.
Marble’s® Contour Front Sights are strong,
stable, and give your rifle a true traditional look.
Marble’s® Contour Front Sights are available in two
widths for ramps or barrels along with various heights
from .260 inches to .570 inches. Choose a gold, ivory
or fiber optic bead. (Orange or Green)
Uni-Ramp Front Sights
Marble’s® has developed a line of uni-ramp front sights that fit all rifles, shotguns, and
muzzle loaders that use screw held front sights. The brilliantly glowing fiber optic cables are
installed and permanently flared to the sight. Both ends of the optic cable are carefully
polished to enhance light transmission and are uniquely protected from UV damage due to
long term exposure to sunlight. Each one is precision CNC machined from solid steel to our
exact standards. These fine sights are machined, polished, and blued to match your gun.
The Marble’s® Uni-Ramp Front Sight is available in fluorescent orange and green in
a variety of heights.
Front Sight with Dovetail Ramp
Give yourself the extra height needed to match
up your front sight with your rear sight along with
maintaining the contour of your barrel. Choose the
standard bead or a fiber optic front sight to dovetail into
the Marble’s® ramp. The ramp screws securely to your
barrel with one 6-48 screw that is provided.
Ruger® Style Front Sights
These fiber optic front sights replace the
standard factory sights for the Ruger® Super
Redhawks and Redhawk revolvers. They are
machined to match the special hook dovetail for these
guns. They give you the high visibility and precision
of a fiber optic sight with the strength of our solid steel
construction.
www.marblearms.com
420 Industrial Park Gladstone MI 49837 • Phone: 906-428-3710 • Fax: 906-428-3711
Front Sight Chart
Front Sight Chart/Fiber Optic 3/32” Bead
Sight
Height
Sight
Width
Description
Bead
Color
.260”
.260”
.290”
.290”
.312”
.312”
.312”
.312”
.343”
.343”
.343”
.343”
.375”
.375”
.375”
.375”
.410”
.410”
.410”
.410”
.450”
.450”
.450”
.450”
.500”
.500”
.500”
.500”
.530”
.530”
.530”
.530”
.570”
.570”
.340”
.340”
.340”
.340”
.340”
.340”
.531”
.531”
.340”
.340”
.531”
.351”
.340”
.531”
.531”
.531”
.340”
.340”
.531”
.531”
.340”
.340”
.531”
.531”
.340”
.340”
.531”
.531”
.340”
.340”
.531”
.531”
.531”
.531”
26MR (Ramp Style)
26MR (Ramp Style)
29MR (Ramp Style)
29MR (Ramp Style)
31MR (Ramp Style)
31MR (Ramp Style)
31W
31W
34MR (Ramp Style)
34MR (Ramp Style)
34W
34W
37MR (Ramp Style)
37MR (Ramp Style)
37W
37W
41MR (Ramp Style)
41MR (Ramp Style)
41W
41W
45MR (Ramp Style)
45MR (Ramp Style)
45W
45W
50MR (Ramp Style)
50MR (Ramp Style)
50W
50W
53MR (Ramp Style)
53MR (Ramp Style)
53W
53W
57W
57W
Gold
Ivory
Gold
Ivory
Gold
Ivory
Gold
Ivory
Gold
Ivory
Gold
Ivory
Gold
Ivory
Gold
Ivory
Gold
Ivory
Gold
Ivory
Gold
Ivory
Gold
Ivory
Gold
Ivory
Gold
Ivory
Gold
Ivory
Gold
Ivory
Gold
Ivory
1/16” Bead
Mfg#
Bead
Mfg#
Sight
Height
502621
502622
502921
502922
503121
503122
103131
103132
503421
503422
103431
103432
503721
503722
103731
103732
504121
504122
104131
104132
504521
504522
104531
104532
505021
505022
105031
105032
505321
505322
105331
105322
105731
105732
602621
602622
602921
602922
603121
603122
603131
203132
603421
603422
203431
203432
603721
603722
203731
203732
604121
604122
204131
204132
604521
604522
204531
204532
605021
605022
205031
205032
605321
605322
205331
205332
205731
205732
.312”
.340”
31MR (Ramp Style) F/O Orange
.312”
.340”
31MR (Ramp Style) F/O Green
.312”
.531”
31W
F/O Orange
.312”
.531”
31W
F/O Green
.343”
.340”
.343”
.340”
34 MR (Ramp Style) F/O Green
.343”
.531”
34W
F/O Orange
.343”
.531”
34W
F/O Green
.375”
.340”
.375”
.340”
.375”
.531”
37W
F/O Orange
.375”
.531”
37W
F/O Green
.410”
.340”
.410”
.340”
41MR (Ramp Style
F/O Green
.410”
.531”
41W
F/O Orange
.410”
.531”
41W
F/O Green
.450”
.340”
.450”
.340”
.450”
.531”
45W
F/O Orange
.450”
.531”
45W
F/O Green
.500”
.340”
.500”
.340”
.500”
.531”
50W
F/O Orange
.500”
.531”
50W
F/O Green
.530”
.340”
.530”
.340”
.530”
.531”
53W
F/O Orange
.530”
.531”
53W
F/O Green
.570”
.531”
57MR (Ramp Style
F/O Orange
.570”
.531”
*Height measured from top of bead to bottom of Dovetail.
3/32”
Front Sight Ramp w/ Dovetail Slot
Barrel
Sight
Barrel
Sight
Diameter
Height
Mfg#
Diameter Height
.625
.100”
072310
.625”
.225”
.6875
.100”
072311
.6875”
.225”
.875
.100”
072312
.875
.225”
Flat
.100”
072313
Flat
.225”
*Height measured from bottom of radius to bottom of Dovetail.
Mfg #
072330
072331
072332
072333
Ruger® Style Pistol Fiber Optic Front Sights
Fiber Optic
Model
Super Redhawk .44 Mag., GP-100
Super Redhawk .454 Casull
Super Redhawk .480 Ruger
Redhawk .44 Mag., Black Hawk Hunter
Sight
Height
.332”
.310”
.390”
Green
Mfg#
101003
101005
101007
Orange
Mfg#
101002
101004
101006
Fiber Optic Uni-Ramp Front Sights
Barrel
Diameter
.625”
.625”
.750”
.750”
.875”
.875”
Sight
Height
.405”
.470”
.405”
.470”
.405”
.470”
F/O Orange
Mfg#
072400
072402
072404
072406
072408
072410
F/O Green
Mfg#
072401
072403
072405
072407
072409
072411
Made in USA
Width
Description
Fiber
Optic Color
Mfg#
603125
603126
203135
203136
603425
603426
203435
203436
603725
603726
203735
203736
604125
604126
204135
204136
604525
604526
204535
204536
605025
605026
205035
205036
605325
605326
205325
205326
205725
205726
®
M
A
Marbles® Rear Sights
Marble
Arms
Sporting Rear Sights
The Marble’s® Sporting Rear Sight is the most recognizable "American Classic" pattern rifle sight.
The design dates back to the late 1800s.
The Marble’s® sporting rear sight became the preferred factory installed, barrel mounted sight of all the major
rifle manufacturers. Fast handling, quick firing vintage rifles made by Winchester, Marlin, Remington, and
Savage all had Marble’s® sporting rear sights. We proudly offer the same sporting rear sight as we did 100
years ago. We even still hand-polish each one before it’s blued.
Our sporting rear has the unique double step elevator and the
reversible U-shaped and V-shaped notch piece for precision sight-in. The
overall sight can be moved up and down with the double step elevator-just
like the vintage models. The hand painted enamel diamond on the notch
piece instantly draws your eye to the sight notch for quick, instinctive
shooting.
The Marble’s® Sporting Rear Sight™ is available in flat top,
semi-buckhorn or full buckhorn style. We still offer the 1-7/8 inch short
carbine model and the 2-3/4 inch full rifle model. (Measuring from center
of dovetail to front of face.) The authentic Marble’s® Sporting Rear Sight is
available in over 20 various heights from .275 inches to .630 inches.
Full- Buckhorn
Semi- Buckhorn
Flat Top
Step Elevator
The Step Elevator controls the height adjustment of the rear
sights just like the vintage models. Available for 1-7/8 inch and 2-3/4
inch rear sights. The double step design assures sturdiness. Thumb
button has been added for easy adjustment.
#95 Folding Sporting Rear
This classic Marble’s® Rear Sight has been used on lever
action guns since 1906. Similar to our standard sporting rear sight, it
also has the ability to be folded down and used with a peep tang sight.
Complete with precision windage and elevation adjustment this sight
is the perfect partner for the classic sporting rear and Marble’s® Peep
Tang Sights. (Designed without elevator.)
Windage Adjustment
Folding Leaf Sight
Marble’s® has been making folding rear sights for almost 100 years. They flatten on top
of a gun barrel to allow the use of a Tang Peep sight or scope without interference. Our Folding
Leaf Rear Sight is available as windage adjustable or drift adjustable. This unique feature allows
you to precision adjust your sight with a small screwdriver or a hammer. The height adjustable
notch piece has both U-shaped and V-shaped centers. You can remove and reverse your notch
piece with a small screwdriver. The hand painted enamel diamond draws the eye to the center
of the notch for lightening quick sight alignment. Marble’s® Folding Leaf Rear Sights are
machined from solid steel and are available in traditional flat-top style. We make these fine sights
in four heights from .360 inches to .620 inches.
Flat Top
Slot Blank
Flat Top with
Windage Adjustment
Notch Piece & Screw
Protect your Dovetail slot with a
Marble’s® slot blank.
(.393 -.396 SAMMI Spec)
Our unique reversible notch piece gives you a
choice of "U" or "V" shaped notch. A hand painted white
enamel diamond helps draw your eye to the center of your
notch. Held in place by sight screw. Can be adjusted
vertically for height.
www.marblearms.com
Sporting Rear Sights
Style
Description
Elevation
Adjustment
Mfg#
Flat Top
#63
.275”-.505”
006300
Flat Top
#63H
.350”-.630”
006301
Semi-Buckhorn
#64
.275”-.505”
006400
Semi-Buckhorn
#64H
.350”-.630”
006401
Full Buckhorn
#65
.300”-.510”
006500
Long Blade 2-3/4” Long (Step Elevator Included)
Flat Top
(#63, #63H, #66, #66H)
Semi- Buckhorn
Style
Description
Elevation
Adjustment
Mfg#
Flat Top
#66
.300”-.510”
006600
Flat Top
#66H
.350”-.630”
006601
Semi-Buckhorn
#67
.300”-.510”
006700
Semi-Buckhorn
#67H
.350”-.630”
006701
Full Buckhorn
#68
.300”-.510”
006800
(#64, #64H, #67, #67H)
Full- Buckhorn
(#65, #68)
Folding Leaf Sight
Folding Sporting Rear Sights
Style
Description
Sight Height
Mfg#
Folding Sporting Rear
#95
.320”-.420”
009500
Measure from bottom of Upright to bottom of “U” or “V” notch.
Style
Description
Sight
Height
Mfg#
Flat Top
#69
.360”-.460”
006900
Flat Top Folding
#69H
.460”-.560”
006901
Flat Top Folding
#69EH
.520”-.620”
006902
Windage
Adjustable
#69W
.360”-.460”
006910
Windage
Adjustable
#69WH
.460”-.560”
006911
Windage
Adjustable
#69WEH
.520”-.620”
006912
Replacement Parts
Item
Mfg#
Notch Piece & Screw
000950
Double Step Elevator Short
009100
(Fits #63, #63H #64, #64H, #65)
Double Step Elevator Long
009200
(Fits #66, #66H, #67, #67H, #68)
Single Step Elevator
Standard Folding Sight
(#69, #69H, #69EH)
009050
(.050” Thick)
Fine Adjustment with Screw
Single Step Elevator
009080
(.080” Thick)
Slot Blanks
Windage Adjustment
Item
Mfg#
Slot Blank-Blued
001187
Flat Top with
Windage Adjustment
Slot BlankNickel Plated
001188
(#69W, #69WH, #69WEH)
Measure from bottom of Dovetail to bottom of “U” or “V” notch.
Made in USA
M
A
®
Marble
Arms
Fluorescent Green
Fluorescent Red
Marble’s® #30 Universal Rear Sights
Large Peep Style
Small Peep Style
U-Shaped Semi-Buckhorn
Marble’s® Universal Rear Sights
By far, Marble’s® Universal Sights are the most versatile barrel mounted sight available today. The
system combines a strong, sleek ramping style base with the option of interchangeable Peep aperture or
Semi-Buckhorn “U” shaped sighting uprights to accommodate the individual shooting styles of any hunter.
The uprights can be changed or easily adjusted and is locked down with a tension screw. Elevation
adjustment has been improved with our new push button system that allows you to quickly change your
elevation in the field in a matter of seconds. The evenly spaced graduation lines allow you to repeat your
adjustments every time. Once set, these sights are rock solid and will hold up to the roughest use. All of the
components are CNC machined from solid steel- no casings, no stampings.
Marble’s® has designed one of the most versatile barrel-mounted fiber optic rear sights that can be
used on modern rifles, slug shotguns, and muzzleloaders. The brilliantly glowing fiber optics is 100%
protected in our reflector channels so you can walk through dense brush without fear of damaging the optic
cables. You can make precision elevation adjustments with our new push button adjusting system. The
sight is available in all standard barrel contours and flat for octagon barrels. Marble’s fiber optics are UV
protected for long life.
Fiber Optic Set
U Upright with Ivory Bead
Peep Upright with Fiber Optic
Demonstration Video Available at: www.marblearms.com
Marble’s® Universal Rear Sight
Base/Slide
Mfg #
Ordering Instructions:
.775 (M)
002546
1. Determine your barrel diameter.
.875 (L)
002547
1.000 (XL)
002548
2. Match the barrel diameter to the base and
select the Mfg #.
Flat
002549
Barrel Diameter
(slide and 6-48 mounting screws included)
*Sight Base and Slide sold together.
3. Select your preferred Upright separately.
Choose the Mfg #.
(uprights are sold separate from the base)
*Sight Uprights each sold separately.
Sight Uprights
Mfg#
*U-Upright
002554
*Small Peep
002550
*Large Peep
002551
*Fluorescent
Orange
002553
*Fluorescent
Green
002552
-Hole size .085”
-Hole size .150”
*Height adjustment for all uprights: .490” - .675”
*U-Uprights•Fluorescent Orange•Fluorescent Green
Measure top of barrel to bottom of “U”.
*Small Peep•Large Peep
Measure center of peep to top of barrel.
Universal base-hole spacing from 1/2” to 1”
(center to center)
Two 6-48 mounting screws included.
Drill hole with #36 drill.
Loosen screw for windage adjustment
Press button for elevation adjustment
Made in USA
M
A
Marble’s® Shotgun Sights
®
Marble
Arms
Expert Shotgun Beads
Marble’s® "Expert" shotgun beads are used exclusively by a number of major
shotgun manufacturers. This style of bead can be rib mounted or directly mounted
on plain barrel shotguns. Our ivory and gold beads will appeal to most traditionalists.
The Marble’s® "Expert" bead body is precision machined from solid steel on our
5-1/2 axis CNC turning centers.
Fiber Optic Expert Beads
Marble’s® "Expert" shotgun beads are also available with
fluorescent orange and green fiber optic cable. The cables are UV protected
and permanently bonded to our machined from solid steel "Expert" bases.
These brilliantly glowing beads will stand out in all light conditions and
extend your shooting hours on heavily overcast days in the field.
Bright enough to see clearly but unobtrusive enough to not alter the
traditional look of your shotgun. Wing shooters and clay target enthusiasts
will really be impressed with the light gathering qualities of the Marble’s®
Fiber Optic "Expert" shotgun beads.
Tritium Expert Shotgun Beads
Continuing Marble’s® mission of "blending time tested tradition with modern
technology" we are introducing a self illuminating shotgun bead. This sight is precision
machined from solid steel to house the tritium capsule that illuminates your front sight in the
dark. This, in combination with a ghost ring rear sight is the perfect combination for law
enforcement shotguns and home defense weapons.
Extra-Lum Expert Beads
Marble’s® “Extra-Lum
Expert" shotgun beads have 50 percent
more light gathering qualities of our standard florescent beads. This
extra bright bead really stands out in any light conditions. You can
really rely on the brilliant “Extra-Lum Expert" bead. The UV protected
fiber optic cable is permanently bonded to our machined from solid
steel base. The ends are highly polished to further guarantee as much
light transfer to the eye as possible. Waterfowl hunters, turkey hunters
and clay target shooters will find the “Extra-Lum Expert" a true
enhancement to their shooting abilities.
Mid-Rib Shotgun Beads
Mid-Rib Shotgun Beads are compatible with any of our
traditional front shotgun beads including our "Expert" Shotgun
Beads. Available in either stake-in Ivory tapered shank for press
fit or brass threaded style. Place the mid-rib beads at the center
of the barrel or 12" to 16" from the muzzle sight to insure perfect
alignment with your front sight.
www.marblearms.com
Expert Shotgun Sights *6x48 OS-.146 major dia. X 48 TPI- with 3/32” shank
3x56-3/32”
& m2.5x.45
Style
Mfg#
Gold
6x48-3/32”
6x48OS-3/32”
5x40-3/32”
m3.0x.5-3/32”
Mfg#
Mfg#
Mfg#
Mfg#
035611
064811
041611
054011
030511
Ivory
035612
064812
041612
054012
030512
F/O Green
035615
064819
041619
054015
030515
F/O Orange
035616
064820
041620
054016
030516
Ex F/O Green
035617
064821
041621
054017
030517
Ex F/O Red
035618
064822
041622
054018
030518
Tritium
035619
064823
041623
054019
030519
Mid-Rib Shotgun Beads
Style
Mfg #
#223 Ivory Stake O .080 dia.
022300
Brass Bead 3x56-32/32”
051813
Reamer-223
022600
Drill and Tap Size
Shotgun Thread Size
Company
Mode
Mossberg
Thread
Winchester
Mod 12
2-56 (must be re-tapped to 3-56)
Winchester
SX2
3-56
Ithaca
37
6-48
Remington
Ivory Bead
6-48 Over Sized
Remington
Silver Bead
6-48 OS (must drill & tap)
Springfield/Savage/Stevens
67
Beretta
Drill Size
3x56
#45
m3x.5
#41
5x40
#38
6x48
#36
6x48OS
#32
M2.5x.45 use 3-56
Benelli
Citori
3-56
Browning
Gold
m3x.5
Browning
A-5
m3x.5
Ruger
Red label
3-56
H&K
Tap
5-40
m3x.5
Shotgun Sight Installation
To align the sight to the barrel you may have to slightly chamfer the
hole in the barrel or rib. This is done with a larger drill bit. (Using only
your fingers to spin the drill to remove a little metal from around the
tapped hole.) You want the sight to be finger tight with about an 1/8 of
a turn left before it is aligned. Remove the sight and use a drop of
Locktite and install the sight. You can use a small wrench to adjust
the sight to align with the barrel. If the shank is showing in the bore of
the barrel you will have to shorten the shank.
Made in USA
M
A
Marble’s® Standard
Peep Tang Sight
®
Marble
Arms
Savage 99 Style
Winchester ‘94 Style
Marlin 336 Style
The Marble’s® Peep Tang Sight is one of the cornerstones of our line. In the days when iron sights were the rule
and scopes were the exception, the Peep Tang Sight was considered the top of the line in both precision shooting
and general hunting. The increase in speed is due to the way your vision is drawn through the rear sight. You
don’t have to acquire a sight picture. You are looking through the rear sight not at the rear sight. Just put the front
sight where you want to shoot and squeeze the trigger. It’s the fastest sight combination for Cowboy Action
Shooters. Webster Marble advocated a tang mounted peep sight on every hunting gun and called the Peep Tang
Sight "the perfect rear sight." Once you use one, you will agree.
Windage Adjustment
Elevation Adjustment
The Marble’s® Peep Tang Sight is adjustable for windage and elevation. The adjustments are micrometer
precise. Each firm detent click equals four-tenths of an inch movement at 100 yards.
www.marblearms.com
Standard Peep Tang Sights List by Manufacturer
Manufacturer
Model
American Arms
1874 Sharps
009816
995027
Savage
Armi
1874 Sharps
009836
995032
Ballard
Browning
#8 Union Hill
1885 (w/ Metal
tang)
009827
009800
995025
995033
Browning
1892 (Tang Safety)
009802
995024
Browning
1886
009806
995013
Browning
78-1885 (w/out
Tang)
009813
995026
Browning
1895 (Japan)
009814
995007
Browning
1895 (Orig)
009815
995017
Browning
71LT
009822
995007
Browning
53-65-1892
009824
995007
Browning
71 Will not fit
Carbine
009828
995023
Cimarron
1866
009811
995006
Cimarron
1873, 73 Sporting
Rifle
Small Frame-CAS
1874 Sharps Will
not fit Carbine
30
Buffalo Classic
Golden Boy .22LR
Golden Boy
.22MAG
Big Boy 44 , 45,
357, 30/30
H001 .22 Lever
action All H001
Except H001V
009832
995010
009831
009836
995029
995032
009804
009813
009833
995015
995026
995001
009844
995003
009848
995006
Marlin
39AS-1894 CB &
CB II-1894S & CS1897 CB
009804
Marlin
30AS-336-444SS1895G-1895SS/
30AW
009805
39A-1889-1892(Orig)/ 25-27-291897
009827
Marlin
1894 (Orig)/1893
009829
995025
Marlin
1897 Annie Oakley
009834
995015
NEF
Survivor
009839
995016
Remington
RB1 Current
Production
009826
995001
Remington
Model 1-2-5
009819
995001
Rossi
65 New 1892
009807
995002
Rossi
59-62
009818
995005
Savage
30G Stevens
Favorite OLD
009827
995025
Colt Lightning
EMF
Glenfield
H&R
Henry
Henry
Henry
Marlin
Sight #
Screw Set #
Manufacturer
Sight #
Screw Set #
1899
009840
995025
Savage
30G Stevens
Favorite NEW
009841
995025
Shiloh Sharps
1874
009838
995030
Shiloh Sharps
New
009843
995030
Springfield
1870
009813
995026
Taurus
M62
009837
995001
Taurus
Thunderbolt C45
009860
995001
Taylor
1874 Sharps
009836
995032
Thompson
Center
Scout
009800
995001
Uberti
Henry
009825
995028
Uberti
1885
009851
995033
Uberti
1866
009811
995006
Uberti
1892
009820
995006
Uberti
Rolling Block
009826
995001
Uberti
1873 Will not fit
Hunter
009832
995006
Varner
.22 Cal Favorite
009835
995008
Winchester
1885 (Japan) HIWall
009800
995001
Winchester
1876-1886(Orig)
009801
995019
Winchester
1892 (Tang
Safety)
009802
995024
Winchester
62-1890-1906
009803
995018
Winchester
1886 (Japan)
009806
995013
995015
Winchester
53-55-64-65-1892
(Orig)-1894
(Except .22 CAL)
009808
995003
995015
Winchester
1866-1873
009809
995004
Winchester
1886 (Tang
Safety)
009810
995022
Winchester
9422 (.22 LR)
009812
995001
Winchester
1895 (Tang
Safety)
009814
995007
Winchester
71LT
009817
995021
Winchester
1885 (Orig)
009821
995021
Winchester
71
009828
995023
Winchester
1885 (Japan) LowWall
009830
995001
Winchester
9422 (.22
Magnum)
009837
995001
Winchester
94 Legacy (Tang
Safety)
009849
995009
995025
Model
Standard Peep Tang Sights List by Sight Number
Sight #
009800
Manufacturer/Model
Browning 1885 (w/ Metal tang); Thompson
Center Scout; Winchester-1885 (Japan) HIWall
Sight #
Manufacturer/Model
009824
Browning 53-65-1892
009825
Uberti Henry
009826
Remington RB1 Current Production; Uberti
Rolling Block
009827
Ballard #8 Union Hill; Marlin 39A-18891892- (Orig)/ 25-27-29-1897; Savage 30G
Stevens Favorite OLD
009828
Browning 71 Will not fit Carbine; Winchester
71
009801
Winchester 1876-1886(Orig)
009802
Browning 1892 (Tang Safety); Winchester
1892 (Tang Safety)
009803
Winchester 62-1890-1906
009804
Glenfield 30; Marlin 39AS-1894 CB &CB
II-1894S & CS-1897 CB
009829
Marlin 1894 (Orig) 1893
009805
Marlin 30AS-336-444SS-1895G-1895SS/
30AW
009830
Winchester 1885 (Japan) Low-Wall
009806
Browning 1886; Winchester 1886 (Japan)
009831
Colt Lightning Small Frame-CAS
009807
Rossi 65 New1892
009832
Cimarron 1873, 73 Sporting Rifle ; Uberti
1873 Will not fit Hunter
009808
Winchester 53-55-64-65-1892 (Orig)-1894
(Except .22 CAL)
009833
Henry Golden Boy .22LR Golden Boy
.22MAG
009809
Winchester 1866-1873
009834
Marlin 1897 Annie Oakley
009810
Winchester 1886 (Tang Safety)
009835
Varner .22 Cal Favorite
009811
Cimarron 1866; Uberti 1866
009836
Armi 1874 Sharps; EMF 1874 Sharps Will
not fit Carbine; Taylor 1874 Sharps
009812
Winchester 9422 (.22 LR)
009837
009813
Browning 78-1885 (w/out Tang); H & R
Buffalo Classic; Springfield 1870
Taurus M62; Winchester 9422 (.22
Magnum)
009838
Shiloh Sharps 1874
009814
Browning 1895 (Japan); Winchester 1895
(Tang Safety)
009839
NEF Survivor
009815
Browning 1895 (Orig)
009840
Savage 1899
009816
American Arms 1874 Sharps
009841
Savage 30G Stevens Favorite NEW
009817
Winchester 71LT
009843
Shiloh Sharps New
009844
Henry Big Boy 44, 45, 357, 30/30, Rem.
009818
Rossi 59-62
009819
Remington Model 1-2-5
009848
Henry H001 .22 Lever action All H001
Except H001V
009820
Uberti 1892
009849
Winchester 94 Legacy (Tang Safety)
009821
Winchester 1885 (Orig)
009851
Uberti 1885
009822
Browning 71LT
009860
Taurus Thunderbolt C45
Aperture
Aperture
Aperture
009780
009782
009785
1/2" Dia. .055 Hole
1/2" Dia. .102 Hole
3/4" Dia. .032 Hole
Standard Peep Tang Sight Base Specifications
Sight #
Hole Spacing
Center To Center
Height
Adjustment
Angle
# 009800
2.000" TO 2.265"
1.680" TO 2.015"
18 DEG.
# 009801
2.185"
2.125" TO 2.460"
18 DEG.
# 009802
.375"
1.890" TO 2.225"
18 DEG.
# 009803
2.000" TO 2.265"
1.680" TO 2.015"
18 DEG.
# 009804
.500"
1.680" TO 2.015"
18 DEG.
# 009805
.460"
2.325" TO 2.660"
21 DEG.
# 009806
2.185"
2.125" TO 2.460"
18 DEG.
# 009807
2.000" TO 2.265"
1.680" TO 2.015"
18 DEG.
# 009808
2.000" TO 2.265"
1.680" TO 2.015"
18 DEG.
# 009809
2.000" TO 2.265"
1.680" TO 2.015"
18 DEG.
# 009810
.375"
1.680" TO 2.015"
# 009811
2.000" TO 2.265"
# 009812
Sight Base
Standard Peep Sight Screw Set
Screw Set
Front Screw
Rear Screw
Extra Screw
995001
#10-32 x .342
#10-32 x .342
995002
#10-32 x .342
M5 x .8 x 1.815 Metric
995003
#10-32 x .342
#12-28 x 1.9
#10-36 x .355
995004
#10-32 x .342
#10-36 x .355
#10-36 x .355
995005
#10-32 x .342
172 x 50 x 1.53
18 DEG.
995006
#10-32 x .342
#10-32 x 1.83
1.915" TO 2.250"
18 DEG.
995007
#10-32 x .342
M5.5 x .5 x 1.775 Metric
.500"
1.680" TO 2.015
21 DEG.
995008
#10-32 x .342
195 x 4 x 1.15 Wood
# 009813
2.000" TO 2.265"
1.680" TO 2.015"
18 DEG.
995009
#6-48 x .250
#12-28 x 1.812
# 009814
.460"
2.325" TO 2.660"
21 DEG.
995010
#10-32 x .342
#10-32 x 1.915
# 009815
.460"
2.325" TO 2.660"
21 DEG.
995011
#10-32 x .342
#10-32 x 2.06
# 009816
2.000" TO 2.265"
1.68O TO 2.015
18 DEG.
995013
#10-32 x .342
M6.5 x .5 x 1.859 Metric
# 009817
2.185"
1.680" TO 2.015"
18 DEG.
995014
#10-32 x .342
M5.5 x .5 x 1.775 Metric
# 009818
2.000" TO 2.265"
1.680" TO 2.015"
18 DEG.
995015
#10-32 x .342
#12-32 x 1.75
# 009819
1.937"
2.415" TO 2.750"
21 DEG.
# 009820
2.000" TO 2.265"
1.680" TO 2.015"
18 DEG.
995016
#10-32 x .342
#10-16 x .645 Wood
# 009821
2.000" TO 2.265"
1.680" TO 2.015"
18 DEG.
995017
#10-32 x .342
#12-28 x 1.9
# 009822
2.185"
2.125" TO 2.460"
18 DEG.
995018
#10-36 x .355
#10-36 x 1.723
# 009824
2.000" TO 2.265"
1.680" TO 2.015"
18 DEG.
995019
#10-36 x .355
#12-28 x 1.9
# 009825
2.000" TO 2.265"
1.680" TO 2.015"
18 DEG.
995020
#10-36 x .355
#10-36 x .355
# 009826
2.000" TO 2.265"
2.415" TO 2.750"
21 DEG.
995021
#10-36 x .355
#12-28 x 2.235
# 009827
1.125"
1.680" TO 2.015"
21 DEG.
995022
#4-48 x .341
M6.5 x .5 x 1.859 Metric
# 009828
.375"
2.135" TO 2.470"
21 DEG.
995023
#4-48 x .341
#12-28 x 2.235
# 009829
.460"
1.920" TO 2.255"
21 DEG.
995024
#4-48 x .341
M5.5 x .5 x 1.775 Metric
# 009830
2.000" TO 2.265"
1.555" TO 1.890"
18 DEG.
995025
#8-40 x .367
#8-40 x .367
# 009831
1.937"
2.165" TO 2.500"
21 DEG.
995026
#10-16 x .645 Wood
#10-16 x .645 Wood
# 009832
2.000' TO 2.265"
1.915" TO 2.250"
18 DEG.
995027
M5x.8 x 1.905 Metric
# 009833
2.000' TO 2.265"
1.680" TO 2.015"
18 DEG.
# 009834
.500'
1.685" TO 2.015"
21 DEG.
995028
195 x 4 x 1.150 Wood
#10-32 x 2.060
# 009835
2.000" TO 2.265"
1.680" TO 2.015"
18 DEG.
995029
#10-24 x .384
#10-24 x .384
# 009836
2.283"
1.680" TO 2.015"
18 DEG.
995030
#10-28 x .353
#10-28 x .353
# 009837
1.125"
1.920" TO 2.255"
21 DEG.
995031
.232 x 26 x 1.905
#10-28 x .353
# 009838
2.283"
1.680" TO 2.015"
18 DEG.
995032
M4 x .7 x .367 Metric
# 009839
1.125"
I.680" TO 2.015"
21 DEG.
995033
#10-32 x .342
#10-32 X .342
#10-32 x 1.830
# 009840
1.125"
1.555" TO 1.890"
N/A
995034
#10-32 x .342
#10-32 x 2.06
#10-32 x 1.830
# 009841
.500"
1.920" TO 2.255"
21 DEG.
# 009843
2.000" TO 2.265"
1.680" TO 2.015"
18 DEG.
# 009844
2.000" TO 2.265"
1.920" TO 2.255"
18 DEG.
# 009848
2.000" TO 2.265"
1.680" TO 2.015"
18 DEG.
# 009849
2.185"
2.375" TO 2.710"
18 DEG.
# 009851
2.000” TO 2.265”
1.680” TO 2.015”
18 DEG.
# 009860
2.000" TO 2.265"
1.680" TO 2.015"
18 DEG.
#10-32 x 2.060
#10-28 x .353
M
A
®
Marble
Arms
Marble’s® Improved
Peep Tang Sight
Marble’s® has improved the classic peep tang sight to accommodate all shooters regardless of the distance that
they shoot. The cowboy shooter and hunter both have asked to have the ability to shoot at 30 yards out to 500
yards and in some cases 1000 yards with the same gun and sight. We have taken our popular Marble’s® Peep
Sight that has elevation and windage adjustment and made it more versatile in the field.
The sight base remains mounted to the tang as before and with a twist of the setscrew the post is removed.
Select the post height that you want and press the post into place firmly then tighten the setscrew.
These highly precision CNC machined parts match up every time for repeatability. The guide stud is machined from
4140 steel and heat treated for strength and hardness. We machined graduation lines on the elevation barrel, which
adjusts in .004” increments per click. We have also added a jam nut to lock in your elevation. This gives you the
advantage of pre-setting an assortment of uprights to be locked in at desired yardage.
We have made this sight to be used by the traditional long-range shooters as an alternate to a Vernier or Soule style
sight. You can purchase (separately) additional shorter posts as well as mid and long-range posts, giving you the
versatility to shoot many guns out over 1,000 yards. The long-range post has 2 inches of elevation adjustment. All of
our sights are machined with the same care and quality that we that has been a tradition for over 110 years.
Improved Peep Tang Sight Demonstration Video Available: www.marblearms.com
* Lowest upright height varies depending on gun.
Recommended lowest upright provided.
Improved Peep Tang Sights List by Manufacturer
Manufacturer
Model
Sight Base #
Screw Set #
American Arms
1874 Sharps
991001
995027
Standard
Armi
1874 Sharps
991001
995032
Short
Ballard
#8 Union Hill
991021
995025
Short
Browning
1885 (w/ metal tang)
991001
995001
Short
Browning
78, 1885,(w/out tang)
991001
995026
Short
Browning
Browning
Browning
53, 65, 1892 (Japan)
1886
71LT
991001
991015
991015
995007
995013
995007
Short
Standard
Standard
Browning
Browning
1895 (Japan)
1895 (Orig)
991025
991025
995007
995017
Standard
Standard
Browning
71
991030
995021
Standard
Browning
Cimarron
Cimarron
Colt Lightning
EMF
1892 (Tang Safety)
1873
1866
Sm. Frame, CAS Shoot
1874 Sharps (not carbine)
991035
991001
991001
991011
991001
995024
995034
995010
995029
995032
Standard
Standard
Standard
Standard
Short
Marlin/Glenfield
30GT, 30AS
991020
995015
Short
H&R
Buffalo Classic
991001
995026
Short
Henry
.22 LR, 22Mag, H004, H004M
991011
995017
Short
Henry
Henry
H001, H001T, .22 Lever (not H001V)
Big Boy .44, 45,357, 30/30 Mag,
991001
991001
995006
995017
Short
Standard
Marlin
Marlin
991020
991020
995015
995015
Short
Short
Marlin
39A,39AS,39M,39TDS
1894CB, 1894CBII, 1894S,1894CS, 1897CB 1897 Annie
Oakley
39, 39A, (Old Model), 1889, 1892 (Orig), 1984 (Orig)
991021
995025
Short
Marlin
336, 444SS, 1895G, 1895SS Any 336 Framed Gun
991025
995015
Standard
Marlin
25,27,29,(originals), 1893
991021
995025
Short
Marlin
30AW
991025
995015
Short
NEF
Survivor
991021
995016
Standard
Remington
Model 1,2,5
991011
995031
Standard
Remington
RB1 (Current Production)
991011
995001
Short
Rossi
65, 1892
991001
995002
Short
Rossi
59,62
991001
995005
Short
Savage
Shiloh
Springfield
Taurus
30G Stevens Favorite
Sharps 1874, 1874 (New)
1870
M62
991021
991001
991001
991021
995025
995030
995026
995001
Short
Short
Short
Short
Taylor
Thompson Center
Uberti
Uberti
1874 Sharps
Scout
1873 (Not Hunter)
1885
991001
991001
991001
991001
995003
995001
995006
995033
Short
Short
Standard
Short
Uberti
1892
991001
995001
Short
Uberti
Uberti
1886
Henry
991001
991001
995001
995028
Standard
Short
Uberti
Rolling Block
991011
995001
Short
Varner
Winchester
322 Cal Favorite
1885 Hi-Wall & Low Wall (Japan)
991001
991001
995008
995001
Standard
Short
Winchester
Winchester
Winchester
Winchester
53,55
62,1890,64,65
1866
1873
991001
991001
991001
991001
995003
995018
995003
995020
Short
Short
Short
Short
Winchester
1885 (Orig)
991001
995004
Short
Winchester
1892 (Orig), 1894 (except .22 cal)
991001
995003
Short
*Upright Selection
Improved Peep Tang Sights List by Manufacturer Con’t
Manufacturer
Model
Sight Base #
Screw Set #
*Upright Selection
Winchester
1906
991001
995003
Short
Winchester
1876, 1886 (Orig)
991015
995018
Standard
Winchester
1886 (Japan)
991015
995019
Short
Winchester
71LT
991015
995013
Short
Winchester
9422 (.22 LR)
991020
995021
Short
Winchester
9422 (.22 Magnum)
991021
995001
Standard
Winchester
1895 (Tang Safety)
991025
995014
Standard
Winchester
1886 (Tang Safety)
991030
995022
Short
Winchester
71
991030
995023
Standard
Winchester
1892 (Tang Safety)
991035
995024
Standard
Winchester
94 Legacy
991017
995009
Standard
Improved Peep Tang Sights List by Sight Number
Sight
Manufacturer/Model
991001
American Arms 1874 Sharps;
Armi 1874 Sharps
Browning 1885 (w/ metal tang);78, 1885,(w/out tang); 53, 65, 1892 (Japan)
Cimarron 1866; 1873; EMF 1874 Sharps (not carbine);
H&R Golden Boy .22LR
Henry H001, H001T, .22 Lever (not H001V); Big Boy .44, .45, 357, 30/30, Mag.
Rossi 65, 1892; Rossi 59,62; Shiloh Sharps 1874, 1874 (New)
Springfield 1870; Taylor 1874 Sharps
Thompson Center Scout
Uberti 1873 (Not Hunter) 1885; 1892, 1886; Henry
Varner 22 Cal Favorite
Winchester 1885 Hi-Wall & Low Wall (Japan); 53,55; 62,1890,64,65;1866;1873;1885 (Orig) 1892 (Orig), 1894 (except .22
cal); 1906
991011
Colt Lightning Sm. Frame, CAS Shoot;
Remington Model 1,2,5; RB1 (Current Production)
Uberti Rolling Block
991015
Browning 1886; 71LT
Winchester 1876, 1886 (Orig); 1886 (Japan); 71LT
991017
Winchester 94 Legacy
991020
Marlin 39A,39AS,39M,39TDS (current model); 1894CB,1894 CBII,1894S 1894 CS,1897 CB,1897, Annie Oakley
Winchester 9422 (.22 LR)
Glenfield 30
991021
Ballard #8 Union Hill
Marlin 39&39A,(Old Model),1889,1892 (Orig)1984 (Orig); 25,27,29,(originals), 1893
NEF Survivor;
Savage 30G Stevens Favorite (old production)
Taurus M62
Winchester 9422 (.22 Magnum)
991025
Browning 1895 (Japan); 1895 (Orig);
Marlin 336, 444SS, 1895G, 1895SS Any 336 Framed Gun; 30AW
991030
Browning 71
Winchester 1886 (Tang Safety); 71
991035
Browning 1892 (Tang Safety);
Improved Peep Tang Sight
Ordering Process:
Improved Peep Tang Sight Screw Set
* Sight and Screw Set need to be ordered separately.
1. Select Manufacturer and Model of Gun.
(Winchester 1892 Replica made by Uberti, the
Manufacturer is Uberti)
Screw Set
Front Screw
Rear Screw
995001
#10-32 x .342
#10-32 x .342
2. Select Sight Base Manufacture part number. (This
is the base only that will be attached to the tang of
the gun)
995002
#10-32 x .342
995003
#10-32 x .342
#12-28 x 1.9
#10-36 x .355
3. Select the Mounting Screw Set. (Some bases are
interchangeable with multiple guns but need specific
screw sets- Example: T/C Scout takes the same
base as Uberti 1885 but the screws are different)
995004
#10-32 x .342
#10-36 x .355
#10-36 x .355
995005
#10-32 x .342
172 x 50 x 1.53
995006
#10-32 x .342
#10-32 x 1.83
4. There are 4 interchangeable uprights that are sold
separately. Each allow you to adjust elevation out to
different ranges with the same base. Our #1 upright
(shortest) does not clear the receiver on some guns
so the lowest possible upright to purchase for this
gun is our #2 upright. (lowest setting will start you at
short range shooting out to at least 100 yards)
995007
#10-32 x .342
M5.5 x .5 x 1.775
Metric
995008
#10-32 x .342
195 x 4 x 1.15 Wood
995009
#6-48 x .250
#12-28 x 1.812
995010
#10-32 x .342
#10-32 x 1.915
995011
#10-32 x .342
#10-32 x 2.06
995013
#10-32 x .342
M6.5 x .5 x 1.859
Metric
995014
#10-32 x .342
M5.5 x .5 x 1.775
Metric
995015
#10-32 x .342
#12-32 x 1.75
995016
#10-32 x .342
#10-16 x .645 Wood
995017
#10-32 x .342
#12-28 x 1.9
995018
#10-36 x .355
#10-36 x 1.723
995019
#10-36 x .355
#12-28 x 1.9
995020
#10-36 x .355
#10-36 x .355
995021
#10-36 x .355
#12-28 x 2.235
995022
#4-48 x .341
M6.5 x .5 x 1.859
Metric
995023
#4-48 x .341
#12-28 x 2.235
995024
#4-48 x .341
M5.5 x .5 x 1.775
Metric
995025
#8-40 x .367
#8-40 x .367
995026
#10-16 x .645 Wood
#10-16 x .645 Wood
995027
M5x.8 x 1.905 Metric
995028
195 x 4 x 1.150 Wood
#10-32 x 2.060
995029
#10-24 x .384
#10-24 x .384
995030
#10-28 x .353
#10-28 x .353
995031
#10-28 x .353
.232 x 26 x 1.905
995032
995033
#10-32 x .342
#10-32 X .342
#10-32 x 1.830
995034
#10-32 x .342
#10-32 x 2.060
#10-32 x 1.830
Summary:
Select Part # for Base
Select Part # for the Screw Set
Select Part # for all desired uprights.
(Different heights for different ranges)
One aperture provided with each post.
Short Range Sight
Standard Range Sight
Long Range Sight
Mid Range Sight
Additional Components
Short Range Upright
Standard Upright
Mid Range Upright
Long Range Upright
Aperture
Aperture
Aperture
990100
990110
990120
990130
009780 1/2" Dia. .055 Hole
009782 1/2" Dia. .102 Hole
009785 3/4" Dia. .032 Hole
Extra Screw
10-32 x 2.060
#10-32 x 2.060
#10-28 x .353
* Some commemorative or limited addition models may have
variations in the screw length.
Pocket Spring
3/32 Ball
Coil Spring
Set Screw 1
Set Screw 2
Set Screw 3
Allen Wrench
009907
009910
009908
009961
009962
009963
009965
6-32 cone
Barrel Set
Windage Set
M
A
®
Marble
Arms
Installing Marble’s® Tang Sight
By Bryce M. Townsley
Installing a tang-mounted peep sight on a rifle is a simple “do it yourself” project for any shooter with a few basic tools. It is best if you clamp the rifle in
a cradle or gun vise. Remove the tang screw, making sure that you use a screwdriver with a blade designed for use on firearms that correctly fits the
slot in the screw. Do not use a standard screwdriver, as the tapered sides can cause the screwdriver to ride out of the slot and damage the screw and
the rifle. Remove any other screws attaching the buttstock and then remove the stock.
Place the sight on the tang and install the longer tang screw supplied with the rear sight in the hole and tighten enough to hold the sight, but also to
allow it to move when tapped gently with a plastic hammer. Be careful, as some imported rifles use metric threads that are very close to the U.S (English)
standard threads used in the United States, but are not interchangeable. The screw can be forced, but it will damage the rifle and the screw. When in
doubt, double check everything with a thread pitch gauge and a dial caliper to insure the screw is correct for the thread in the rifle. Never force a screw,
it should turn in easily. If it does not, there is a reason.
Center the free end of the sight base on the tang by tapping it gently with a plastic hammer or with a hammer and a nylon or brass punch. The human
eye is a very good tool to insure that the sight is centered on the tang. Just make sure that the lighting is even on both sides. You can confirm that the
sight is centered by measuring on each side from the edge of the tang to the edge of the sight. The depth function on a dial caliper works very well for
this.
Mark the tang in the exact center of the hole with a center punch by tapping it with a small hammer. Again, the human eye is a very good indicator of
center. It is best if one person holds the punch while another checks the center from several angles.
Remove the tang screw and remove the sight. Clamp the rifle in a vise with padded jaws and mounted on a drill press. Chuck the proper size drill bit
for the screw you will be installing in the drill press. Make sure to match the drill size to both the screw size and the thread pitch. For example, the 10-32
screw used on the majority of rifles will require a #21 drill. Keep in mind that the screw hole you will be threading may be different than the thread used
in the existing screw holes in the gun.
Make sure that the tang is square and level to the drill and that the drill is lined up exactly with the punch mark in the tang. If the drill table is correctly
leveled and the chuck is properly squared to it, you can align the tang using a small level. Level the tang and then index off the receiver with a vertical
reading level to make sure the gun is square to the drill. You can drill the gun with a hand held drill if you do not have a drill press, but it’s a poor second
choice. It helps to have one person hold the drill while another checks visually from several angles to insure the drill bit is straight and square with the
tang.
This is the part where you modify the rifle, so check and recheck until there is no doubt it is correct. When you are certain, carefully drill through the
tang, using the mark from the center punch as a guide to start the drill. Be sure to apply plenty of cutting oil during the drilling process.
Select the correct tap for the screw supplied with the sight and install the tap in a tap handle. Make certain that the tap is square with and centered in
the drilled hole and that you have applied plenty of cutting oil. Carefully turn the tap clockwise to cut the new threads. Reverse the tap often to clear the
chips. Reapply the oil often. The tap should turn easily and cut cleanly. If it binds or chatters, stop; something is wrong. Do not force it as taps are very
brittle and can break easily if misused.
After you have the thread cut through the full depth of the hole, remove the tap. Wipe the tang clean of cutting oil and chips. Degrease the threads.
Install the butt stock and put the sight in place. Replace the tang screw, but do not tighten. A drop of blue Loctite on the threads of each screw before
installing them will help ensure that the screws stay tight. Install the front screw, but do not tighten. Return to the rear tang screw and snug it tight. Then
tighten the front sight screw.
If the gun has an existing rear sight, use a brass or nylon punch and a small hammer to remove the open sight from its dovetail. Drive it from left to right.
Install a Marbles dovetail slot blank by tapping it into place with a brass or nylon punch, right to left, until centered.
If you use a brass punch it may leave “tracks” on the metal. Remove this brass smear with copper removing bore solvent on a cotton patch.
The front sight may need to be exchanged for one that is that is higher or lower. Drive the existing sight out of the dovetail left to right and drive the new
one in right to left.
If the front sight or the dovetail slot blank will not start or is a very tight fit, the dovetail may need to be modified slightly. Use a parallel side, three corner,
safe file designed for this work. A safe file has only one side that cuts, with the other two being smooth. Make a very light pass with the file and check
the fit. Remember, you can’t replace metal after you remove it, so work very slowly and check often. Finish by turning the file at an angle to put a very
slight bevel on the edge to help start the sight or dovetail slot blank.
The sight is now installed. All that is needed is to zero the gun at the shooting range. Note that there are several screw in apertures shipped with your
sight. The smaller the aperture hole, the more precise the sight will be. Smaller apertures are excellent for target shooting or sighing in, the larger
apertures work better for hunting.
Sighting in is easiest if you start with a large target at relatively close range; 25 yards is excellent. This helps to insure that the bullet impacts are on the
target. Fire three shots and measure the distance from the center of the group to the center of the aiming point, both vertically and horizontally.
When adjusting the rear sight always move the sight in the direction the bullet impact needs to move on the target. If the bullet is hitting low, move the
rear sight up. If the impact is to the left, move the rear sight to the right, etc. The Marbles Tang sight is moved up or down by twisting the knurled vertical
section directly under the aiming aperture, clockwise moves the sight and the point of impact up, counterclockwise moves it down. Horizontal or windage
adjustments are made by turning the knurled knob on the right side of the sight. Clockwise moves the sight to the right and counter-clockwise moves it
left. With both adjustments, one click equals one minute of angle. So, each inch of movement at 25 yards will require four clicks. At one hundred yards,
each click will move the point of impact one inch. Once zeroed at 25 yards, move the target to the distance desired for the final zero and repeat the
process to fine tune.
Tools needed for installing tang sight.
Tools needed for installing a front sight
and/or dovetail slot plug
•Center Punch
•Hammer
•Hammer
•Dial caliper
•Brass or nylon punch
•Vise
•Three corner “safe file” with parallel sides
•Drill Press (or handheld drill)
•Tap & tap handle
•Cutting oil
www.marblearms.com
•Loctite
M
A
®
The Catch .22
Marble
Arms
•The fastest, easiest way to load
tubular magazine .22 rifles
catch
.22
™
Storage Dispenser
•Keeps .22 shells clean and safe, which
in turn keeps your rifle clean and safe
•Designed by world-renowned
craftsman Blackie Collins
D
iscover a safer, more convenient way to carry .22 ammunition.
Brand new to the market, the Catch .22 storage dispenser allows 50 rounds
of .22LR cartridges to clip right to your belt or pocket for quick access.
The Catch .22 is an easy way to speed-load tubular magazine rifles.
Convenient and fun to use, the Catch .22 eliminates the need to
juggle flimsy factory cardboard boxes. It prevents contamination from dust
or debris that may stick to lubricated bullets and damage the bore of your
firearm. The Catch .22 organizes bullets in ten staggered holes containing
five bullets each. Detents on the sliding lid allow you to access only the
bullets you need while remaining bullets are kept clean and secure. The
Catch .22 offers a great alternative for gun owners and parents who are
concerned with hunter safety.
“W
hen I was allowed to shoot my dad's .22 rifle at the age of nine years, I underwent a serious
program of the dos and don'ts of gun handling. Part of my training involved the proper handling of .22
rimfire ammunition. I was a little disturbed when told to discard and never use any ammo that had been
dropped on the ground. Dad explained how .22 ammunition was outside lubricated and the oily residue on
the bullets would pick up all kinds of stuff that could be harmful to the bore when it was fired. I was also
instructed never to carry bullets loose in my pockets for the same reasons. The Catch .22 keeps the ammo
clean and ready to use without worrying about the contamination."
– Designer Blackie Collins
Part # 000960
Catch .22 Demonstration Video Available at: www.marblearms.com
Additional Information Con’t
#009800-#009808 Peep Tang Sight Installation
1. Sight in gun with factory sights to 100 yards
2. Adjust peep tang sight so that you are in the middle of the adjustment- windage and elevation.
3. Place peep tang sight on tang so that when looking through peep sight aperture, all sights are in alignment.
4. Mark the holes-#009800 hole spacing is 2.185” center to center.
5. Make sure you are center (left to right) on the tang.
6. Remove stock and put gun in vise
7. Center punch holes.
8. Recheck for center alignment.
9. Drill with undersize drill, in case you are not center. Drill size #32 or smaller for both holes.
10. Now that you are center-drill with #21 drill bit and tap with a #10-32 tap.
11. Keep chips from entering gun by using a heavy tap oil when tapping.
12. Remove chips and mount sight.
13. Some cases you may have to shorten the screws.
14. Remove gun from vise and reinstall stock.
Peep Tang Sight Maintenance & Care
Windage adjustment has 66 clicks=.260”
Elevation adjustment has 85 click=.335”
Each click is about 1/4” of adjustment at 100 yards
The further the target the smaller the aperture is recommended.
To adjust windage, turn windage knob clockwise to move right and counter clockwise to move left.
To adjust the elevation, turn elevation knob to left to move up and to the right to move down. Never move tang fully forward or
damage will occur to sight.
Drill and Tap Size
Shotgun Thread Size
Company
Mode
Mossberg
Thread
Winchester
Mod 12
Winchester
SX2
3-56
Ithaca
37
6-48
Remington
Ivory Bead
6-48 Over Sized
Remington
Silver Bead
6-48 OS (must drill & tap)
Springfield/Savage/Stevens
67
Beretta
Drill Size
3x56
#45
m3x.5
#41
5x40
#38
6x48
#36
6x48OS
#32
M2.5x.45 use 3-56
Benelli
Citori
3-56
Browning
Gold
m3x.5
Browning
A-5
m3x.5
Ruger
Red label
3-56
H&K
Tap
5-40
m3x.5
.
040”
M
A
®
Marble
Arms
Marble’s® Distributors
Blue Ridge Knife Co.
166 Adwolfe Road
Marion VA 24354
276-783-6143
Fax: 276-783-9298
www.blueridgeknives.com
Jack First, Inc.
1201 Turbine Dr.
Rapid City SD 57701
605-343-9544
Fax: 605-343-9420
www.jackfirstgun.com
Bowmac Gunpar, Inc.
69 Iber Rd., Unit 101
Stittsville, Ontario
K2S 1E7 Canada
800-668-2509
Midway USA
MidwayUSA
Attention: Dealer Sales
5875 W. Van Horn Tavern Rd.
Columbia, MO 65203
800-243-3220
Fax: 800-992-8312
[email protected]
www.midwayusa.com
Brownell’s, Inc.
200 South Front St.
Montezuma, IA 50171
800-741-0015,
Fax 641-623-3896
www.brownells.com
Buffalo Arms Co.
660 Vermeer Court
Ponderay, ID 83852
208- 263-6953
Fax:208-265-2096
www.buffaloarms.com
Cut Knife Distribution
Box 158 Cut Knife
SK SOM ONO Canada
306-398-2222
Fax: 306-398-2807
www.cutknifedistribution.ca
Ellett Brothers
267 Columbia Ave.
Chapin SC 29036-0128
803-345-3751
Fax: 803-345-1820
www.ellettbrothers.com
Evil Roy Shooting School
909 N. Hidden valley Circle
Durango CO 81301
970-385-4141
www.evilroyshootingschool.com
Numrich Gun Parts Corporation
Gun Parts Corporation
226 Williams Lane, PO Box 299
West Hurley, NY 12491
845-679-2417
866-686-7424
Fax: 845-679-5849
www.e-gunparts.com
S.I.R. Mailorder
1300 Ellice Ave.
Winnipeg, Manitoba R3G Canada
204-788-4867
Fax: 204-786-8964
www.sirmailorder.ca
Smoky Mountain Knife Works
2320 Winfield Dunn Parkway
Sevierville TN 37876
865-428-8102
Fax: 865-428-5991
www.eknifeworks.com
UTAS
1247 Rand Road
Des Plaines IL 60016
847-768-1000
Fax: 847-768-1001
Gander Mountain
www.gandermountain.com
www.marblearms.com

Marble Arms - Waffen Ferkinghoff

Transcription

Similar documents

mini-beryl - Fabryka Broni

Untitled

Counterfeit Alert: L-3 EOTech Holographic Sights

Feedscrews - Davis

Legacy Sell Sheet

SCI-Central Washington Chapter Rifle Raffle

New for 2011 Adjustable Series

Bowhunt America, Zebra Publishing Inc

Table Of Contents - Williams Gun Sight

Year of the Ox begins - South Bergenite

March