DVD-RW/HDD TUNER

Transcription

DVD-RW/HDD TUNER

STANDBY/ON
VOLUME
PLA
Y
0 OPEN/CLOSE HDD/DVD
STOP
STOP REC
ORDER NO.
REC
RRV3019
PULL OPEN
DV IN/OUT
XV-DVR9H
DVD-RW/HDD TUNER
XV-DVR9H
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model
Type
Power Requirement
Regional restriction
codes (Region No.)
XV-DVR9H
WYXJ
AC220-240V
2
XV-DVR9H
WVXJ
AC220-240V
2
Remarks
÷ When servicing this model, some service procedures may reset the settings that customer set (*) to
the factory default settings. Make sure to explain this to the customer.
(*) : Initial Setup (Clock Setting, Tuner settings, Video In / Out settings, Audio In settings,
Audio Out settings, Language settings, Recording settings, Playback settings)
Refer to the chapter 15 of the Operating Instructions for more details.
An HDD (Hard Disc Drive) is mounted in this product.
The HDD is a precision instrument very vulnerable to shock and electrostatic charges. Please read
"7.4 Cautions on Handling the HDD" in this manual and exercise sufficient caution when handling the
HDD itself, as well as the product with the HDD built in.
When an HDD becomes defective and inoperable, restoration of the user's data recorded on the HDD,
or copying of the user's recorded data to other media (such as a new HDD) is totally impossible.
Before servicing, OBTAIN THE USER'S PRIOR CONSENT to that effect.
The user must be made aware that all recorded data are deleted if the HDD is intialized.
For details, refer to "Important Check Points for Good Servicing".
PIONEER CORPORATION
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2004
T-ZZK OCT. 2004 printed in Japan
1
2
3
4
SAFETY INFORMATION
A
B
LASER DIODE CHARACTERISTICS
MAXIMUM OUTPUT POWER : 70 mW
PULSE WIDTH : 100ns DUTY : 50% 140mW
WAVELENGTH : 654 - 662 nm
LASER DIODE CHARACTERISTICS
MAXIMUM OUTPUT POWER : 100 mW
PULSE WIDTH : 100ns DUTY : 50% 240mW
WAVELENGTH : 780 - 787 nm
LABEL CHECK
WARNING !
The AEL (accessible emission level) of the laser power output is less than CLASS 1
but the laser component is capable of emitting radiation exceeding the limit for
CLASS 1.
A specially instructed person should do servicing operation of the apparatus.
C
D
DRW2194
E
Additional Laser Caution
(Printed on License Label)
1. The ON/OFF(ON:low level,OFF:high level) status of the
CLAMP signals for detecting the loading state are detected
by the drive CPUs, and the design prevents laser diode
oscillation when the CLAMP signal turns OFF.
In normal operation, if no disc is clamped, the laser diode
oscillation is disabled.
However, the interlock does not always operate in the test
mode.
2. When the cover is opened, close viewing of the objective
lens with the naked eye will cause exposure to a Class 3A
laser beam.
F
2
XV-DVR9H
1
2
3
4
5
6
7
8
[Important Check Points for Good Servicing]
In this manual, procedures that must be performed during repairs are marked with the below symbol.
Please be sure to confirm and follow these procedures.
A
1. Product safety
Please conform to product regulations (such as safety and radiation regulations), and maintain a safe servicing environment by
following the safety instructions described in this manual.
1 Use specified parts for repair.
Use genuine parts. Be sure to use important parts for safety.
2 Do not perform modifications without proper instructions.
Please follow the specified safety methods when modification(addition/change of parts) is required due to interferences such as
radio/TV interference and foreign noise.
3 Make sure the soldering of repaired locations is properly performed.
B
When you solder while repairing, please be sure that there are no cold solder and other debris.
Soldering should be finished with the proper quantity. (Refer to the example)
4 Make sure the screws are tightly fastened.
Please be sure that all screws are fastened, and that there are no loose screws.
5 Make sure each connectors are correctly inserted.
Please be sure that all connectors are inserted, and that there are no imperfect insertion.
6 Make sure the wiring cables are set to their original state.
Please replace the wiring and cables to the original state after repairs.
In addition, be sure that there are no pinched wires, etc.
C
7 Make sure screws and soldering scraps do not remain inside the product.
Please check that neither solder debris nor screws remain inside the product.
8 There should be no semi-broken wires, scratches, melting, etc. on the coating of the power cord.
Damaged power cords may lead to fire accidents, so please be sure that there are no damages.
If you find a damaged power cord, please exchange it with a suitable one.
9 There should be no spark traces or similar marks on the power plug.
When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure
connections and suitable usage. Please exchange the power cord if necessary.
0 Safe environment should be secured during servicing.
D
When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. in order to prevent injuries.
Please pay attention to your surroundings and repair safely.
2. Adjustments
To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification.
Adjustments should be performed in accordance with the procedures/instructions described in this manual.
3. Lubricants, Glues, and Replacement parts
Use grease and adhesives that are equal to the specified substance.
Make sure the proper amount is applied.
E
4. Cleaning
For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper
cleaning should be performed to restore their performances.
5. Shipping mode and Shipping screws
To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be
installed before shipment. Please be sure to follow this method especially if it is specified in this manual.
F
3
XV-DVR9H
5
6
7
8
1
2
3
4
CONTENTS
SAFETY INFORMATION ..................................................................................................................................... 2
1. SPECIFICATIONS ............................................................................................................................................ 5
2. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 8
2.1 PACKING ................................................................................................................................................... 8
2.2 EXTERIOR SECTION.............................................................................................................................. 10
2.3 CHASSIS SECTION ................................................................................................................................ 12
2.4 FRONT PANEL SECTION ....................................................................................................................... 14
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .......................................................................................... 16
3.1 BLOCK DIAGRAM ................................................................................................................................... 16
3.1.1 OVERALL BLOCK DIAGRAM ........................................................................................................... 16
3.1.2 MAIN ASSY BLOCK DIAGRAM ........................................................................................................ 20
3.1.3 POWER SUPPLY BLOCK DIAGRAM................................................................................................ 22
3.2 OVERALL WIRING CONNECTION DIAGRAM........................................................................................ 24
3.3 TV MODULE ASSY.................................................................................................................................. 26
3.4 TV CONNECT ASSY ............................................................................................................................... 28
3.5 JACK ASSY (1/2) ..................................................................................................................................... 30
3.6 JACK ASSY (2/2) ..................................................................................................................................... 32
3.7 MAIN ASSY (1/5) ..................................................................................................................................... 34
3.8 MAIN ASSY (2/5) ..................................................................................................................................... 36
3.9 MAIN ASSY (3/5) ..................................................................................................................................... 38
3.10 MAIN (4/5), ATWB and ATHB ASSYS.................................................................................................... 40
3.11 MAIN ASSY (5/5) ................................................................................................................................... 42
3.12 CONTROL ASSY (1/4)........................................................................................................................... 44
3.13 CONTROL ASSY (2/4)........................................................................................................................... 46
3.14 CONTROL ASSY (3/4)........................................................................................................................... 48
3.15 CONTROL ASSY (4/4)........................................................................................................................... 50
3.16 DSP ASSY (1/2)..................................................................................................................................... 52
3.17 DSP ASSY (2/2)..................................................................................................................................... 54
3.18 REG, DISPLAY, LED, TRADE, F. JACK, IR, KEY L and KEY R ASSYS ................................................ 56
3.19 POWER SUPPLY UNIT.......................................................................................................................... 58
3.20 WAVEFORMS ........................................................................................................................................ 60
4. PCB CONNECTION DIAGRAM ..................................................................................................................... 63
4.1 TV MODULE ASSY.................................................................................................................................. 64
4.2 TV CONNECT ASSY ............................................................................................................................... 65
4.3 JACK and TRADE ASSYS ....................................................................................................................... 66
4.4 MAIN ASSY ............................................................................................................................................. 70
4.5 CONTROL ASSY ..................................................................................................................................... 74
4.6 DSP ASSY ............................................................................................................................................... 78
4.7 REG ASSY............................................................................................................................................... 80
4.8 DISPLAY and LED ASSYS ...................................................................................................................... 81
4.9 FRONT JACK ASSY ................................................................................................................................ 82
4.10 IR, KEY L and KEY R ASSYS ............................................................................................................... 83
4.11 ATWB and ATHB ASSYS ....................................................................................................................... 84
5. PCB PARTS LIST ........................................................................................................................................... 85
6. ADJUSTMENT ............................................................................................................................................... 92
6.1 TV MODULE ADJUSTMENT ................................................................................................................... 92
6.2 MAIN ASSY ADJUSTMENT .................................................................................................................... 93
7. GENERAL INFORMATION ............................................................................................................................. 94
7.1 DIAGNOSIS ............................................................................................................................................. 94
7.1.1 CPRM ID NUMBER AND DATA SETTING ........................................................................................ 95
7.1.2 MODEL SETTING ............................................................................................................................. 99
7.1.3 DOWNLOAD METHOD ................................................................................................................... 100
7.1.4 SERVICE MODE ............................................................................................................................. 102
7.1.5 ERROR RATE MEASUREMENT..................................................................................................... 117
7.1.6 SERVICE SPECIFICATIONS OF THE PT MICROCOMPUTER (PDC117A-K) .............................. 119
7.1.7 SPECIFICATIONS OF THE DSP DISPLAY ..................................................................................... 120
7.1.8 VIDEO ADJUSTMENT FOR SPECIFIC AREA ............................................................................... 123
7.1.9 AGING MODE ................................................................................................................................. 127
7.1.10 SETUP SEQUENCE...................................................................................................................... 129
7.1.11 DSP TROUBLE SHOOTING ......................................................................................................... 130
7.1.12 DISASSEMBLY.............................................................................................................................. 134
7.2 PARTS.................................................................................................................................................... 141
7.2.1 IC ..................................................................................................................................................... 141
7.3 DIAGNOSIS METHOD OF THE HDD.................................................................................................... 175
7.4 CAUTIONS ON HANDLING THE HDD .................................................................................................. 181
7.5 DISC/CONTENT FORMAT .................................................................................................................... 183
7.6 CLEANING............................................................................................................................................. 184
8. PANEL FACILITIES ...................................................................................................................................... 185
A
B
C
D
E
F
4
XV-DVR9H
1
2
3
4
5
6
7
8
1. SPECIFICATIONS
General
TV tuner section
System . . . . . . . . . . . . . . . . HDD, DVD-Video, DVD-R/RW,
Video-CD, Super VCD, CD,
CD-R/RW (WMA, MP3, JPEG, CD-DA)
Power requirements . . . . . . . . . . . . . . 220-240 V, 50/60 Hz
Power consumption
XV-DVR9H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 W
S-DVR9SW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 W
Power consumption in standby
XV-DVR9H . . . . . . . . . . . . . . . . . 0.80 W (front display off)
S-DVR9SW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 W
Dimensions . . . . . . . . . . . 420 (W) x 77.5 (H) x 398 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6 kg
Operating temperature . . . . . . . . . . . . . . . . . +5ºC to +35ºC
Operating humidity . . . . . . . . . . . . . . . . . . . . . . . 5% to 85%
(no condensation)
TV system . . . . . . . . . . . . . . . . . . . . . . . . . . . . PAL/SECAM/
NTSC (external input only)
Recording
Recording format . . . . . . . . . . . . . . . DVD Video Recording
DVD-VIDEO
Recordable discs
DVD-RW (DVD Re-recordable disc)
DVD-R (DVD Recordable disc)
Receivable channels
Video recording format
Sampling frequency . . . . . . . . . . . . . . . . . . . . . . . . 13.5MHz
Compression format . . . . . . . . . . . . . . . . . . . . . . . . . MPEG
Audio recording format
Sampling frequency . . . . . . . . . . . . . . . . . . . . . . . . . . 48kHz
Compression format . . . . . . . . .Dolby Digital or Linear PCM
(uncompressed)
Recording time
HDD
Fine (FINE) . . . . . . . . . . . . . . . . . . . . . . . . Approx. 17 hours
Standard Play (SP) . . . . . . . . . . . . . . . . . . Approx. 34 hours
Long Play (LP) . . . . . . . . . . . . . . . . . . . . . Approx. 68 hours
Extended Play (EP) . . . . . . . . . . . . . . . . Approx. 102 hours
Manual Mode (MN) . . . . . . . . . . . . . Approx. 17-102 hours
DVD-R/DVD-RW
Fine (FINE) . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 1 hour
Standard Play (SP) . . . . . . . . . . . . . . . . . . . Approx. 2 hours
Long Play (LP) . . . . . . . . . . . . . . . . . . . . . . Approx. 4 hours
Extended Play (EP) . . . . . . . . . . . . . . . . . . Approx. 6 hours
Manual Mode (MN) . . . . . . . . . . . . . . . . Approx. 1-6 hours
A
PAL B/G
PAL I
Frequency
Channel
Frequency
Channel
VHF (low)
47 - 89 MHz
E2 - E4
X-Z
44 - 89 MHz
VHF (high)
104 - 300 MHz
E5 - E12
S1 - S20
M1 - M10
U1 - U10
104 - 300 MHz
A-C
X-Z
D-J
11, 13
S1 - S20
Hyper
UHF
302 - 470 MHz
470 - 862 MHz
S21 - S41
E21 - E69
302 - 470 MHz
470 - 862 MHz
S21 - S41
E21 - E69
SECAM L
SECAM D/K
Frequency
Channel
Frequency
Channel
VHF (low)
49 - 65 MHz
2-4
49 - 94 MHz
R1 - R5
VHF (high)
104 - 300 MHz
5 - 10
B-Q
104 - 300 MHz
R6 - R12
S1 - S20
Hyper
300 - 470 MHz
S21 - S41
302 - 470 MHz
S21 - S41
UHF
470 - 862 MHz
21 - 69
470 - 862 MHz
E21 - E69
B
STEREO
B/G - A2
I - NICAM
L - NICAM
B/G - NICAM
D/K - NICAM
C
Amplifier section
Continuous Power Output (RMS):
Front, Center, Surround . . . . . . . . . . . . . 100 W per channel
(1 kHz, 10 % T.H.D., 6Ω)
Subwoofer . . . . . . . . . . . 100 W (100 Hz, 10 % T.H.D., 6Ω)
FM tuner section
Frequency range . . . . . . . . . . . . . . . . . . . . 87.5 to 108 MHz
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . 75Ω, unbalanced
D
AM tuner section
Frequency range . . . . . . . . . . . . . . . . 531 kHz to 1,602 kHz
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Loop antenna
Timer
Programs . . . . . . . . . . . . . . . . . . . . . . 1 month/32 programs
Clock . . . . . . . . . . . . . . Quartz lock (24-hour digital display)
Power off memory . . . . Approx. 5 years (after manufacture)
E
F
5
XV-DVR9H
5
6
7
8
1
2
3
Input/Output
A
B
C
D
E
VHF/UHF antenna input/output terminal . . . . . VHF/UHF set
75Ω (IEC connector)
Video input . . . . . . . . . . . . . . . . . . . . . Line 1 (rear), 2 (front)
Input level . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p (75Ω)
Jacks . . . . . . . . . AV connector (Line 1), RCA jack (Line 2)
Video output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AV1, AV2
Output level . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p (75Ω)
Jacks . . . . . . . . . . . . . . . . . . . . . AV connector (AV1/AV2)
S-Video input . . . . . . . . . . . . . . . . . . . Line 1 (rear), 2 (front)
Y (luminance) - Input level . . . . . . . . . . . . . . . 1 Vp-p (75Ω)
C (colour) - Input level . . . . . . . . . . . . . . 286 mVp-p (75Ω)
Jacks . . . . . . . . . AV connector (Line 1), RCA jack (Line 2)
S-Video output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AV1
Y (luminance) - Output level . . . . . . . . . . . . . 1 Vp-p (75Ω)
C (colour) - Output level . . . . . . . . . . . . . 286 mVp-p (75Ω)
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . AV connector (AV1)
RGB input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Line 1
Input level . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7 Vp-p (75Ω)
Jacks . . . . . . . . . . . . . . . . . . . . . . . . AV connector (Line 1)
RGB output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AV1
Output level . . . . . . . . . . . . . . . . . . . . . . . . 0.7 Vp-p (75Ω)
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . AV connector (AV1)
Audio input . . . . . . . . . . . . . . . . . . . . Line 1 (rear), 2 (front),
Analog audio (rear) L/R
Input level
During audio input . . . . . . . . . . . . . . . . . . . . . . . . . . 2V rms
(Input impedance: more than 22 kΩ)
Jacks . . . . . . . . . . . . . . . . . . . . . . . . AV connector (Line 1),
RCA jacks (Line 2, Analog audio)
Audio output . . . . . . . . . . . . . . . . . AV1, AV2, Analog audio
During audio output . . . . . . . . . . . . . . . 2V rms (AV1, AV2)
1V rms (Analog audio)
(Output impedance: less than 1.5 kΩ)
Jacks . . . . . . . . . . . . . . . . . . . . . AV connector (AV1/AV2)
RCA jacks (Analog audio)
Control input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mini jack
DV input/output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 pin
(i.LINK/IEEE 1394 standard)
4
AV2 (LINE 1) connector input/output for VCR or other
component
PIN no.
1 : Audio 2/R out
2 : Audio 2/R in
11 : G in
3 : Audio 1/L out
6 : Audio 1/L in
15 : R or C in
4 : GND
17 : GND
7 : B in
19 : Video out
20 : Video in or Y in
8 : Status
21 : GND
Accessories (DVD-RW/HDD Tuner)
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
AA/R6 dry cell batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SCART cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
RF antenna cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
12-pin system cable (blue) . . . . . . . . . . . . . . . . . . . . . . . . . 1
16-pin system cable (black) . . . . . . . . . . . . . . . . . . . . . . . . 1
AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
FM wire antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warranty Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Setup Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
AV Connectors (21-pin connector assignment)
This connector sends/receives video and audio signals to/
from a compatible colour TV, monitor, VCR, etc.
AV1(RGB)-TV connector output for TV/monitor
PIN no.
1 : Audio 2/R out
2 :−
11 : G out
3 : Audio 1/L out
6 :−
15 : R or C out
4 : GND
17 : GND
7 : B out
19 : Video out or Y out
20 : −
8 : Status
21 : GND
F
6
XV-DVR9H
1
2
3
4
5
6
7
8
• Accessories
Remote control
(AXD7398: WYXJ type)
(AXD7399: WVXJ type)
AM loop antenna
(ATB7013)
A
G
1
3
8
7
4
¢
¡
e
E
¶
Dry cell batteries
(AA, R6P) x2
(VEM1031)
B
FM Wire antenna
(ADH7030)
RF antenna cable
(VDE1075)
12-pin system cable
(ADE7063) L=3m
SCART cable
(VDE1079)
C
Blue plugs
16-pin system cable
(ADE7099)
Black plugs
Power cord
(ADG1154: WYXJ type) x2
Power cord
(ADG1156: WVXJ type) x2
D
E
F
7
XV-DVR9H
5
6
7
8
1
2
3
4
2. EXPLODED VIEWS AND PARTS LIST
NOTES:
A
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Screws adjacent to mark on product are used for disassembly.
For the applying amount of lubricants or glue, follow the instructions in this manual.
(In the case of no amount instructions, apply as you think it appropriate.)
2.1 PACKING
13
14
15
16
B
17
22
For WVXJ
19
18
23
For WYXJ
19
12
7
20
10
C
19
For WVXJ
9
For WVXJ
19
For WYXJ
6
21
7
8
For WYXJ
25
7
4
D
26
1
11
7
5
2
7
6
3
24
E
27
F
8
XV-DVR9H
1
2
3
4
5
6
7
8
PACKING SECTION Parts List
Mark No.
1
Description
Mark No.
Part No.
Operating Instructions
(German/French)
(Spanish/Italian)
(English/Dutch)
Setup Guide
(German/French)
Setup Guide
(Spanish/Italian)
See Contrast table(2)
ARE7349
NSP 7
8
9
NSP 10
Setup Guide
(English/Dutch)
Polyethylene Bag
Operating Instructions (English)
HDD Caution 7L A
Warranty Card
Z21-038
ARM7090
ARY7065
11
12
NSP 13
14
15
HDD Caution 7L B
SCART Cable
Dry Cell Battery (AA,R6P)
FM Wire Antenna
RF Antenna Cable
ARM7091
VDE1079
VEM1031
ADH7030
VDE1075
2
3
4
5
6
>
Description
Part No.
16
17
18
19
20
12-pin System Cable
16-pin System Cable
AM Loop Antenna
Power Cord
Spacer Card
ADE7063
ADE7099
ATB7013
AHB7102
21
22
23
24
25
Spacer
Remote Control
Battery Cover
Front Pad
Rear Pad LR
AHB7096
AZA7424
AHA7438
AHA7439
26
27
Packing Sheet
Packing Case
AHG7010
A
B
C
(2) CONTRAST TABLE
XV-DVR9H/WYXJ and WVXJ are constructed the same except for the following:
Mark
No.
1
2
3
4
5
8
>
19
22
27
Description
XV-DVR9H/WYXJ
XV-DVR9H/WVXJ
(German/French)
(Spanish/Italian)
(English/Dutch)
ARC7560
Not used
ARC7561
Not used
ARE7348
Not used
Setup Guide
(German/French)
Setup Guide
(Spanish/Italian)
(English)
ARC7564
Not used
ARC7565
Not used
Not used
ARB7316
ADG1154
AXD7398
AHD8335
ADG1156
AXD7399
AHD8336
D
Power Cord
Remote Control
Packing Case
E
F
9
XV-DVR9H
5
6
7
8
1
2
3
4
2.2 EXTERIOR SECTION
A
Note (∗): No. 8 Acetate tape (GYH1001) to fix the
FFC cable to the RW drive comes on a
30-m roll, which has its own part number.
9
Silicon adhesive
GYA1011
35
35
10
35
33
mm
B
8 (∗)
35
50
13
16
5m
14
34
m
B
E
8 (∗)
1
12
8 (∗)
15
17
11
33
35
C
20
C
16
19
35
34
18
20
21
35
C
A
21
36
32
2
D
B
P
3
4
O
22
N
36
M
5
35
8(∗)
24
23
6
27
A
J
25
Refer to
"2.3 CHASSIS SECTION".
28
30
37
NON-CONTACT
SIDE
35
26
29
35
31
Refer to
"2.4 FRONT PANEL SECTION".
F
10
XV-DVR9H
1
2
3
4
CONTACT SIDE
E
5
6
7
8
EXTERIOR SECTION Parts List
Mark No.
Description
Mark No.
Part No.
Description
Part No.
1
2
3
4
5
ATWB Assy
KEY L Assy
KEY R Assy
IR Assy
FRONT JACK Assy
AWU8240
AWU8221
AWU8222
AWU8227
AWU8226
21
22
23
24
25
Joint Mold
Rivet
17P FFC/60V
15P FFC/60V
9P FFC/60V
AMR7489
AEC7514
ADD7494
ADD7488
ADD7492
6
7
8
9
10
DISPLAY Assy
Silicone Adhesive
Acetate Tape
Bonnet Case
Side Panel L
AWU8216
GYA1011
GYH1001 *(30-m roll)
ANE7322
AAK8208
26
27
28
29
30
7P FFC/60V
Rubber Foot
PIONEER Name Plate
Tray Cap
Tray Panel
ADD7491
VEB1325
AAM7014
AAK8210
AAK8213
11
12
13
14
15
Side Panel R
Gasket
4P Lead with Housing
40P FFC/60V
Housing Assy (2P)
AAK8209
AEC7515
ADX7469
ADD7496
VKP2315
31
32
33
34
35
DV Cap
Connector Assy (4P)
Screw
Screw
Screw
AAK8215
PF04PP-S05
BBZ30P040FCC
AMZ30P060FTC
BBZ30P080FTC
16
17
18
19
20
DRIVE Assy R7 (For servise)
Mecha Angle L
Mecha Angle R
Panel Sheet
Earth Spring
VXX2942
AND7069
AND7070
AEC7522
ABK7059
36
37
Screw
Tray Panel Assy
PPZ30P080FTC
AZA7431
A
B
C
D
Note :
When the Bonnet Case is replaced, the Gasket also need to be
replaced at the same time.
The reason why No.12 Gasket AEC7515 is necessary :
When No.12 Gasket AEC7515 is not assembling to the Bonnet
Case, the product does not satisfy the standard value of electric
wave interference regulation.
When the Bonnet Case is replaced, confirm that AEC7515 is
assembling to the Bonnet Case.
• Position of the Gasket
Rear
NO. 9 Bonnet Case
Bottom view
Right
E
Left
NO. 12 Gasket
165mm
50mm
Note :
No.8 Acetate Tape using at the production line is ZTA-156A-19.
Front
F
11
XV-DVR9H
5
6
7
8
1
2
3
4
2.3 CHASSIS SECTION
43
A
1
14
13
15
H
C
D
I
F
43
J
16
2
3
17
12
H
43
B
39
L
A
43
40
4
K
43
43
A
F
19
7
J
41
B
G
5
6
43
G
Lithium Battery
(CR2032)
18
I
43
8
C
42
43
28
I
21
44
43
22
E
32
20
Q
43
43
42
28
29
31
K
25
43
43
43
30
43
11
24
D
43
43
43
23
H
44
43
B
43
47
43
43
43
C
45
F
R
G
27
26
E
9
E
36
43
F
CONTACT SIDE
NON-CONTACT
SIDE
D
C
45
B
34
33
A
43
38
43
35
D
45
10
37
12
46
XV-DVR9H
1
2
3
4
5
6
7
8
CHASSIS SECTION Parts List
Mark No.
>
Description
Mark No.
Part No.
1
2
3
4
5
JACK Assy
ATHB Assy
DSP Assy
TRADE Assy
CONTROL Assy
AWU8215
AWU8241
AWX8486
AWU8224
AWU8202
26
27
28
29
30
6
7
8
9
10
REG Assy
TV MODULE Assy
TV CONNECT Assy
FM/AM TUNER Unit
MAIN Assy
AWU8225
AWU8217
AWU8203
AXX7170
VWV2013
31
32
33
34
35
11
12
13
14
15
POWER SUPPLY Unit
HDD 80G 4R080L0
40P FFC/60V
AWR7013
VXF1010
ADX7468
ADD7497
ADX7467
NSP 36
NSP 37
38
39
40
16
17
18
19
20
Connector Assy (10P)
Rivet
Connector Assy (16P)
HDD Base
21P FFC/60V
PF10PP-S25
AEC7514
PF16PP-S25
ANG7517
ADD7487
41
42
43
44
45
Description
Part No.
11P FFC/60V
Rear Panel
Rubber Bushing
Door Cushion
Fan Cover
ADD7493
ANC8275
VEB1112
VEC2312
AMR7488
DC Fan Motor
Barrier
8P FFC/60V
24P FFC/60V
32P FFC/60V
VXM1109
AEC7524
ADD7486
ADD7489
ADD7490
Bottom Chassis
Heat Sink
Radiation Sheet
Earth Plate
Gasket Ring
ANA7175
VNH1070
AEB7352
VBK1153
AEB7363
#6-32 Screw
Screw B
Screw
Screw
Screw
DBA1125
PBA1014
BBZ30P080FTC
IBZ30P150FCC
BBZ30P040FCC
License Label PT
Screw
PSC30P080FNI
A
B
C
21
22
23
24
25
PCB Support
Wire Saddle
Angle PCB B
PCB Mold
Angle PCB A
NSP 46
47
AEC7513
AEC7518
AND7068
AMR2534
AND7067
(2) CONTRAST TABLE
Mark
NSP
NSP
No.
46
46
Description
License Label PT WY
License Label PT WV
XV-DVR9H/WYXJ
XV-DVR9H/WVXJ
ARW7314
Not used
Not used
ARW7315
D
E
F
13
XV-DVR9H
5
6
7
8
1
2
3
4
2.4 FRONT PANEL SECTION
CONTACT SIDE
NON-CONTACT
SIDE
A
16
16
9
7
8
4
B
3
10
1
K
6
14
11
13
15
14
5
12
C
2
11
D
E
F
14
XV-DVR9H
1
2
3
4
5
6
7
8
FRONT PANEL SECTION Parts List
Mark No.
Description
Mark No.
Part No.
1
2
3
4
5
LED Assy
Front Panel Assy
Front Panel
Button L
Button R
AWU8223
AAD7731
AAD7738
11
12
13
14
15
6
7
8
9
10
Button Cap
Door Spring
Illumination Lens
Lens Holder
3P FFC/60V
AAK8246
ABH7234
AAK8214
AMR7487
ADD7495
16
Description
Part No.
Rubber Foot
Window
Sealing Door
Door Cushion
Door Sheet
VEB1325
AAK8211
AAK8278
VEC2312
AAK8216
Screw
PPZ30P080FTC
A
B
(2) CONTRAST TABLE
Mark
No.
2
3
Description
Front Panel Assy
Front Panel
XV-DVR9H/WYXJ
XV-DVR9H/WVXJ
AXG7236
AMB7880
AXG7242
AMB7891
C
D
E
F
15
XV-DVR9H
5
6
7
8
1
2
3
4
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM
3.1 BLOCK DIAGRAM
3.1.1 OVERALL BLOCK DIAGRAM
A
A
AFC
17
1
2
TVL
(17P)
16
U/V
(23P)
CN808 (1/2)
(23P)
1
19
2V
TVL
1
17
15
SCVY
23
13
11
Y/CVBS
27
2Y
TRADE ASSY
Trap
1
14
Y
SCVY
79
Y In
23 CR
1
AV2 R/C In
7
2C
3
CB in
25
Y
LIN4
14
11
13
JA5202
VIDEO
12
L
R
8
V
L
6
IC203 13
TA1287FG
7
14
8
12
14
2
4
LIN2
8
LIN1
IC205
2
R/C In
Clamp 5
Pulse
CN4501
(40P)
G In
18
IC201
IC501
LA73026AV
28 (1/2)
B In
V/Y In
23
L In
[ATA]
Sync
1 Sep 2
HDD
IC1001
M65673WG
SCART 5
1 Chip
Sysytem Codec
33Interface
39
36
JA501
1
L In
8
DVD-VR
DVD-Video
V/Y In
IC202
SDRAM
16Mbit
DRIVE ASSY
CN101
(45P)
Pickup
4
2
A
B
C
D
S4
S3
S2
S1
PICKUP
ASSY
LOADING
MOTOR
M
STEPPIONG
MOTOR
M
DVD-VR
DVD-Video
CN401 CN4401
(40P)
(40P)
DSP
IC1401
IC1421
IC1103
ATA SDRAM
256Mbit ×2
SRAM
4Mbit
IC301
M30700FKLGP
3
LD
DRIVE
[ATAPI]
IC201
UPD63630GM
5
SPDL
MOTOR
F
L
5
RGB
Interface 15
INPUT2
E
LPF
Audio Selector
with Electirc ATT
16
C
AV1
C/CB
9
(17P)
C
Y/C
D
LPF
75
IC601
LC75342M
JA5201
AV2
(23P)
23
CN5201 CN703
FRONT
JACK ASSY
JA502
CN704 (1/2)
CR in
G 1/3
SIF
2
Stereo
Decoder 27 L
MSP3417G
1
L 1/3
4
B 1/2 TV CONNECT ASSY
C
23
CONTROL ASSY
4
B
M 1/2
CN806 (1/2)
23
(19P)
SIF
CN471
11
23 VIF/SIF
24
12 SIF
IC
IC401
(23P)
(19P)
CN5503
16
U/V
Video Selector
Video Driver
IC701
LA73033(1/2)
AV2 V/Y IN
11
16
SIF
SAW
16
C 1/3 JACK ASSY
Trap
IC302
TDA9818TS
Trap
17
U/V
CN5504
PIF
SAW
U/V
(19P)
AGC
(19P)
(19P)
CN361
CN351
CN301
(19P)
RF IN
IF
RF
OUT 11
CN803 (1/2)
TV MODULE ASSY
ANT U301 VXF1023
U/V TUNER
48
201
Writer
CPU
D
33
34
MAIN ASSY
35
Flash
64Mbit
IC1102
36
38
PB DVD/CD
37
40
7-10
13-16
G 2/3
76
RF IC
CONTROL
ASSY
39
CN801
(1/2)
(24P)
CD Digital
13
IC101
UPC3330GC
(12P)
2
2
6CH
Driver
CN502
(2P)
(24P)
CN201
(2P)
CD Digital
IC501
BD7907FS
XV-DVR9H
2
3
13
CN3001
(1/2)
CN802
CN501
16
1
CPU SDRAM
128Mbit
IC1101
4
5
6
7
8
A
: Recording system signal route
: Playback system signal route
• R ch is same as L ch.
TPB
XTPA
TPA
JA5001
XTPB
DV TERMINAL
1
2
3
4
5,7 6
2
1
J 1/2
SEL Y/CVBS
DISPLAY ASSY
CN5001
(7P)
B
CN5102 1,3 2
CN701(1/2)
SEL C/CB
(32P)
24
26
Y/CVBS
9
C/CB
(7P)
IC5204
DV SDRAM
16Mbit
6
XTPB
TPB
TPA
XTPA
SEL CR
7
7
38 39 37 36
22
L
28
CR
IC5202
UPD72893BGD-LML
IEEE1394
Link IC
11
SEL.L
IC5101
UPD72852AGB-8EU
IEEE1394
Physical IC
C
5
C 2/3 JACK ASSY
CN2001 (1/2)
(32P)
JA502
IC3101
AK5357VT
Master Clock Freerun
• MPEG2 PS Encode
• AC-3/Linear PCM
Audio Encode
• 2ch ATA/ATAPI Interface
R26
• MPEG2 PS Decode
• AC-3/MPEG1/Linear T26
PCM Audio Decode
V27
R/C In
G In
B In
9 Audio
10
A/D 2
12 48KHz
20Bit
AV2
Sampling Rate IC3301
SM5950AM
Converter
V Out
7
IC501 25
LA73026AV
13 (2/2) 26
L Out
CR IN
2
C/CB IN
CVBS IN
SCART
Interface
11
30
D
JA501
42
V/Y Out
IC651
AG24
AF23
AD21
AG25
AE24
+6dB
IC206
4
2
6
IC502
R OUT
6
F5
R/C Out
AV1
1
G Out
7
D2
B Out
IC207
IC1301
ENC
SDRAM
128Mbit
4
2
6
G OUT
IC503
4
6
IC208
4
6
CN2001
(2/2)
(32P)
R
DEC
SDRAM
64Mbit
IC1201
B
G
Y
C
2
Y/C
Mix
L Out
2
L
B OUT
R
IC701
LA73033(2/2)
CN701
(2/2)
L
AUDIO
R IN
JA702
Video Selector
Video Driver
(32P)
21
12
45
60
23
10
51
58
25
8
53
56
29
4
27
6
17
16
Y OUT
AUDIO
OUT
R/C
E
G
B
43
C OUT
41
IC3201
PCM1742KE
1-3
Audio 7
D/A Conv.
2
1
3
CN704 (2/2)
(23P)
IC3251-1/2
UPC4570G2
19 15
5
SPDIF
CN3001
(2/2)
(24P)
1
1
SPDIF
CONTROL ASSY
CN801
(2/2)
CN803 (2/2)
(23P)
(24P)
5
5
9
9
9
CN808 (2/2)
(23P)
F
CN806 (2/2)
(23P)
A B C
Refer to next page.
L 2/3 TRADE ASSY
17
XV-DVR9H
5
6
7
8
1
2
3
4
A
Refer to ex-page.
ANT
A B C
FM/AM TUNER UNIT
FM
CN1
CN5505
(11P)
(11P)
TXL
6
ANT
CONTROL ASSY
-6dB -10dB
11
FMDET
2
G 3/3
IC2001
BU4052BCF
Input Selector
13
15
AM
IC2002
Buffer
B
B 2/2
TV CONNECT ASSY
CN471
CN5504
(19P)
RDS DATA
2
(19P)
RDS
19
19
15
15
CN8902
CN8007
(19P)
LIN
IC8401
AK4529V0
8ch Codec IC
C
FL
SLBO
(19P)
3
7
19
FL
7
19
IC8401
IC8402
CN8904
IC8501
DSPD56367PV150
DSP IC
LFE MIX
/Gain SEL
LPF
SLBO
Balance
Out
(13P)
3
3
1
1
5
5
(13P)
OPTIN
OPTIN
1
IC5501
PDC117
PT µ-com
DSP ASSY
IC801
IC804
PEG014
BR24L32F-W
Tuner µ-com
EEP ROM
3
FLP
2
FLN
CN5506
(16P)
IC3901
BD3812F
HP VOL IC
CN8901
CN8003
(12P)
IC8501 - IC8506
CN8903 IC8652
(19P)
Buffer
Control Data
(19P)
H
IC8301 - IC8303
LIN
3
CN8011
IC8201
AK4114VQ
DIR & DIT IC
RDS DATA
To SUB WOOFER
4
RDS DATA
IC5701
BU1924F
RDS IC
IC3902
HP AMP
14
IC802
RS5C372A
Real Time
Clock
Control
Data
D
JA4601
DIGITAL
OPT IN
JA4602
DIGITAL
OPT OUT
JA5901
IC5901
TC7WH08FU
SR +
CN5502
CN803
(15P)
(23P)
13
E
J 2/2
O KEY L ASSY
P KEY R ASSY
K LED ASSY
N IR ASSY
CN806
CN5802
(23P)
(23P)
IC5801
PT6302L0-003
FL Driver
V5801
FL
C 3/3 JACK ASSY
Key
SW
13
L 3/3 TRADE ASSY CN808
(15P)
DISPLAY ASSY
CN704
M 2/2 FRONT
11
(23P)
CN703
(17P)
X5151
IR
13
CN5201
4
4
JA5301
PHONES
(17P)
JACK ASSY
F
18
XV-DVR9H
1
2
3
4
5
6
7
8
A
B
C
D
E
F
19
XV-DVR9H
5
6
7
8
1
2
3
4
3.1.2 MAIN ASSY BLOCK DIAGRAM
A
D
MAIN ASSY (VWV2013)
AUDIO LR OUT
IC3251
C
JACK ASSY
B
CN2001
AUDIO LR IN
VIDEO Y,C,Yp,Cb,Cr OUT
V/Y IN
AGC
IC2302
Cr IN
Cb IN
IC3101
AK5357VT
A/D
IC3201
PCM1742KE
DAC
C IN
IC3403
ADCCLKO
PEDCTL
IC2211
IC2031 ACC
RGB_H
D.OUT
C
G
CONTROL ASSY
CN3001
CD D.OUT
TO TUNER u-COM
IC1301
ECLK0
IC1001
ENC
SDRAM
M65673WG
1 Chip System Codec
MT48LC4M32B2TG-7
IC1201
DCLK0
DEC
SDRAM
D
• MPEG2 PS Encode
• AC-3/Linear PCM Audio Encode
• 2ch ATA/ATAPI Interface
• MPEG2 PS Decode
• AC-3/MPEG1/Linear PCM Audio Decode
ATA BUS
IC1401
ATA SDRAM
K4S561632E-TC75
To Writer
CN4401
W986416DH-6
ARCLK0
SERIAL
IC1421
ATA SDRAM
K4S561632D-TC75
To H.D.D
CN4501
E
IC1102
CN1901
F
FLASH
VYW2176
20
IC1103
Backup
SRAM
CY62148VLL-70ZI
XV-DVR9H
1
2
3
4
5
6
7
8
A
VSS1195
X4102
VCXO
ADMCLKI
Input Mster
clock
IC4101
B
27M
33/36M
IC3402
SM8707KV
PLL IC
36M
AMCLK2
33M
VMCLKI
27M
IC4205
DVVPWM
AMCLK1
C
DVPLLCK(ADMCLKI)
IC3301
SRC
SRC**O
SM5950AM
24M
SRC**I
TC7WHU04FU
Play Mster clock
D
IC4206
DVVCLKO
E
IC5341
HCLK0
VCLKI
IC5202
HOST BUS
MCLK
IC1101
CPU SDRAM
K4S281632E-TC75
LINK/DV CODEC
IC5204
DV SDRAM
UPD72852AGB-8EU
SCLK
IC5101
Phy
K4S161622D-TC80
CN5102
UPD72893BGD-LML
J
DISPLAY
ASSY
F
DV
21
XV-DVR9H
5
6
7
8
1
2
3
4
3.1.3 POWER SUPPLY BLOCK DIAGRAM
4
VX+9
5
19
19
18
18
16
16
14
14
17
14
14
12
12
10
10
8
8
6
6
13
13
11
4
2
2
3
2
CN361
17
16
12
VE+76 7
IC451
6V REG
1
2
E
C
11
10
9
8
8
C
VE+37
VA-6
VE+76
OUT
6
6
4
4
2
2
10
7
9
11
12
12
14
14
16
17
VSA+12
18
VSA-12 19
VI+5
20
VS+13
21
22
23
16
13
VSA-12
15
17
18
19
20
21
22
23
IN
VA-7
7
5
10
E
12
9
IN
B
14
13
10
OUT
E
15
11
8
15
16
13
8
5
13
VSA+12
VA+6
17
IC901
5V REG
5
3
3
1
H
2
18
6
11
VA+7
19
18
VE+37
3
3
CN5503
19
4
6
9
Q805
1
4
7
VET+5
3
3
B
2
2
5
C
4
1
1
1
4
1
2
Q5503
5
CN806
1
3
VES+56
7
14
5
4
6
3
VET+6
7
5
6
15
9
7
8
5
11
9
VET+6
8
CN803
Q5504
9
7
B
15
VE+5
VT+9
TRADE ASSY
16
VS+6
B
11
C
10
B
12
10
E
12
B
16
15
TV CONNECT
ASSY
19
VE+33
Q5501
13
9
18
VU+5
15
13
VT+9 11
VD+5
17
C
VS+6
VT+9
Q5652
E
TV MODULE ASSY
A
CN471
15
17
C
11
DC FAN
MOTOR
13
12
VSA+12
11
VA+5
10
VS+6
9
VT+9
8
VD+5
7
6
VE+76
5
4
VE+33
3
VE+56
2
1
IN
10
VS+6
18
14
9V REG
CN5505
CN5504
16
15
OUT
9
17
19
VE+37
7
VD+5
CN351
CN5501
VE+37
VD+5
8
VD+5
CN301
VX+9
6
FM/AM
TUNER
UNIT
B
CN5651
VD+5
3
1
6
4
5
7
8
10
9
12
11
13
2
FAN+
15
14
16
to SUBWOOFER
CN5506
1
A
1
G
CONTROL ASSY
L
DSP ASSY
CN8003
D
CN8901
13
V5A
V5D1
13
12
12
10
10
8
8
11
9
9
6
6
4
4
5
V+5VI
18
2
17
1
16
15
14
13
IN
12
11
IC8902
1.8V REG
OUT
22
21
20
IC8901
3.3V REG
OUT
24
23
19
3
2
V1R8
VS+13
5
3
V3D
CN801
VD+5
VD+5
7
7
1
VA+5
11
10
9
IN
8
7
6
5
4
E
3
2
1
2
CN5802
1
3
CN5502
2
3
VES+5
VS+13
5
4
5
4
6
6
7
9
8
10
10
8
9
7
11
13
12
12
11
14
14
13
15
15
VE+5
1
VE+5
VS+13
VES+5
FL
F
22
XV-DVR9H
1
2
3
4
5
6
7
VSA+12
IC156 5V REG
OUT
CN152
IC154
9V REG
VE+37
16
15
OUT
14
VS+13
I
IN
IN
OUT
VS+6
11 VSA+12
VA+5
10
9 VS+6
VT+9
8
7 VD+5
6
5 VE+76
VE+33
VE+56
3
A
IN
12
4
REG ASSY
IC155
9V REG
13
2
8
VD+5
1
IC152
5V REG
9
8
IN
10
7
6
5
4
3
1
CN153
2
OUT
4
20
6
18
8
16
19
5
10
5.6V REG
VSA-12
9
8
7
3
VI+5
21
VSA+12
22
3
4
VAV+9
5
VS+13
6
2
VO+5
23
1
CN704 CN702
1
2
VE+56
CN808
OUT
IN
CN151
9
VSA-12
13
VSA+12
12
12
14
10
16
8
13
11
VS+13
17
18
6
20
4
22
2
9
IC153 VE+6
3.3V REG
7
OUT
VSA+12
VSA-12
VI+5
VS+13
5
19
1
23
6
8
8
10
10
5
VSA-12
7 VSA-12
9 VSA+12
9
11 VS+13
11
12
12
13
14
VE+6
15
VS+6
16
FLDC+
17
VFDP
18
FLDC19
20
21
Q155
E
3
21
4
6
7
VE+76
IN
B
15
C
11
4
5
15
B
1 VE+37
3
3
14
10
2
2
17
7
CN202
VE+37 1
13 VE+76
14
16
18
20
15 VE+6
VS+6
17 FLDC+
VFDP
19 FLDC21
4
FLDC-
3
VFDP
2
FLDC+
1
E
IN
CN154
JACK ASSY
CN706
Q785
C
E
Q783
C
E
OUT
24
23
V+5D
V+5RP
21
C
B
20
19
Q4000
18
OUT
16
4
32
30
31
3 VE+6
4
Q
1
2
3
5
4
6
28
27
25
26
8
2
3
VS+6 1
1
2
2
4
4
6
6
8
8
V+2R5V
3
3
V+4V
IN
5
5
V+PRA IC4008
1.2V REG
17
1 VE+15
2
D
CN201
IN
OUT
CN205
1
V+6V
IC4006
5V REG
V+12A
E
7
11
IC4004
5V REG
VS+13
29
B
23
24
10
22
21
V+5A
CN3001
22
VE+6
9
19
20
13
14
18
15
16
18
17
19
12
17
15
16
14
12
20
21
22
24
23
25
13
11
9
10
7
26
8
5
6
28
27
29
30
32
2
4
3
VO+5
1
VO+5
31
CN2001
VE+15
B
VSC+5
CN701
POWER SUPPLY UNIT
C
C
B
OUT
C
Q156
IC202 VSC+12
9V REG
V+9V
7
7
IN
VS+6
VS+2.5
VS+4
VS+4
VS+4
CN4001
15
14
13
V+3V IC4007
3.3V REG
11
OUT
12
10
V+2R5
9
8
V+3D
7
OUT
5
IC5002
2.5V REG
6
4
3
D
2
1
IN
CN208
1 VS+5
IN
2
HDD
IC4002
3.3V REG
OUT
3
4 VS+12
IN
MAIN ASSY
E
CN204
4 VS+12
3
DRIVE ASSY R7
2
1 VS+5
J5201
7
5
4
4
4
3
3
5
KEY R ASSY
5
6
6
8
8
7
3
2
7
CN5105
FLDC+
FLDC-
FLDC+
VFDP
VE+5
VFDP
FLDC-
1
CN5851
VS+13
DISPLAY ASSY
1
1
2
2
3
3
VS+13
CN5861
K
LED ASSY
3
IC5801
FL DRIVER
1
2
3
4
3
FLDC3
VFDP
2
FLDC+
1
4
P
1
6
2
J5202
1
6
5
O KEY L ASSY
VE+5
1
2
VE+5
8
2
8
J5201
1
9
7
J
VE+5
CN5101
9
2
CN5801
VE+5
J5202
Vout
Vcc
GND
N
F
IR ASSY
23
XV-DVR9H
5
6
7
8
1
2
3
4
9
7
6
5
4
3
2
1
GNDD 13
VA+5
12
GNDA 11
GNDA
10
9
VD+5
7
6
E
GNDA
SW
GNDA
SL
GNDA
SR
RECMUTE
FL
VCOMG
FR
GNDA
LIN
GNDA
RIN
2
19
18
18
16
16
14
14
12
12
DSPRST
DSPSS
10
9
1
2
FAN+
B2B-PH-K-S
CN8902
20
20
22
22
19
21
23
23
CN807
XKP30821
2
3
4
5
6
7
8
9
10
11
15
16
17
18
19
20
21
22
23
CN809
XKP30821
2
3
4
5
6
7
8
9
10
11
12
12
13
14
15
13
14
15
16
16
17
17
19
19
21
21
23
23
18
18
20
20
22
22
22
23
CN801
10
9
7
6
6
4
4
5
5
3
1
19
18
CN8903
18
17
17
16
16
15
14
14
13
13
12
11
10
9
12
8
6
6
4
4
2
2
3
5
8
6
4
3
2
1
6
4
2
6
4
2
8
1
1
J
3
5
7
9
11
13
24
2
GND
1
3
5
8
10
12
15
VKN1275-
÷ When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS
LIST" or "PCB PARTS LIST".
÷ The > mark found on some component parts indicates the importance of the
safety factor of the part. Therefore, when replacing, be sure to use parts of
identical designation.
÷
: The power supply is shown with the marked box.
PCMOUT
DISPLAY ASSY
(AWU8216)
FL
XV-DVR9H
2
3
VKP2315
ADD7488(15Pin FFC)
14
OPT IN/OUT
10
TX-FL-con DOWN LOAD
12
2
7
1
3
4
14
6
9
5
7
11
1
10
CN802
5
ADD7489
(24Pin FFC)
7
GND
SPDIF
7
3
12
11
HSTtoM
GND
ASCKSYS
9
8
14
13
9
11
5
16
15
SSMtoTSYS
GND
SSTtoM
GND
10
7
18
17
GND
PCMOUT
GND
HSMtoTSYS
DISCHARGE
2
2
19
RAMUTE
MRST
3
1
20
MUTE
XRST
LAMUTE
X525P
8
8
SR+
1
14
GND
24
VS+13 23
22
BUP
V+5VI 21
SYSTEM u-CON DOWN LOAD
F
B16B-PH-K-S
CN5651
2
1
3
5
4
6
8
10
9
7
14
12
11
GNDF
18
11
7
1
18
21
EXTRGB
CSTBY
13
LSSN
GNDD
17
19
15
DIRRST
DIRERR
XTLO
15
13
11
CN8011
BUSY
DSPHREQ
DSPMODE
DIRDO
DIRCS
16
15
13
15
16
17
12
13
17
15
DSPDI
DSPDO
DSPCK
13
1
17
19
16
3
19
MUTE_OUT
MUTE
MODC
DECMUTE
15
5
XKP3069-
DSP ASSY (AWX8486)
H H 1/2 - H 2/2
D
7
6
2
14
VKN1255-
1
SBLO
8
4
14
11
B2B-PH-K-S
3
GNDA
SBRO
GNDA
C
9
4
13
10
VKN1246-
OPTIN
UGRTN
OPTOUT
CN8007
11
8
9
CN5502
DGRTN
G G 1/4 - G 4/4
7
11
CN804
10
5
12
XKP3071EVOLCE 1
EVOLDATA
2
EVOLCLK 3
4
SDA
SCL 5
SWSTBY
6
SYNC 7
SYNCAFT
8
TEXTV 9
10
SDET2
AOUTMUTE 11
12
SDET1/SAMUTE
SDET3/MUTEMASK1 13
14
S1/MUTEMASK2
X525P 15
16
AVLIN
AVLOUT 17
XPSAVE
18
FUNC 19
20
XTHROU
BLANKIN 21
12
XKP3069-
GNDD
GNDD
OPTIN
8
12
5
7
9
15
GNDTV
UVOUT
13
XKP3066-
VD+5
10
5
6
13
VSA-12
VI+5
VS+13
CONTROL ASSY (AWU8202)
CN8901
CN8003
10
2
4
CN5802
C
8
3
TRADE ASSY (AWU8224)
VKN1775-
19R-1.25FJ
8
6
8
1
3
L
9
6
XKP3082-
1
IR
KEY2
VES+5
DIMMER
1
10
4
KEY1
VS+13
LED AMB
3
11
4
LED BLUE
VE+5
4
2
AGC
12
2
11
XFLRST
XFLCS
FLDATA
FLCLK
GNDD
GNDLED
2
1
13
1
AFT
SDA
SCL
3
5
14
2
9
HPDET
RECMUTE
VSA+12
3
6
16
2
GNDTV
TUON
4
7
17
15
5
8
18
MIONTA
18
MUTE
17 GNDTV
16
UVOUT
15 GNDTV
LDASH(/JJ:NC)
14
13 LM/(/JJ:NC)
12
PSAVEBS(/JJ:JUST)
11 GNDTV
10
VE+37
9 GNDTV
8
VE+76
7 GNDTV
6
GNDTV
5 TUON
4
SDA
3 AFT
2
SCL
1 AGC
4
GNDTV
VET+6
9
19
7
6
5
10
CN5503
19
6
8
7
GNDTV
VE+37
1
8
10
9
2
2
1
CN808
XKP3082-
7
VE+56
PGM
TXD
VPP
RXD
SCLK
BUSY
XDLRST
GND
11
SIF
5
GNDA
LOUTR
GNDA
AINL
GNDA
AINR
GNDA
HPL
GNDHP
HPR
9
13
LOUTL
5
3
CN805
11
4
52045-0945
14
12
6
4
JA4601
GNDTV
6
5
3
CN806
XKP3071-
GP1FA513RZB
LM/
PSAVEBS
12
3
CN803
JA4602
14
13
TVR
GNDA
7
1
GP1FA513TZ
15
LDASH
SU/SAPID
GNDTV
UV_RIN(/JJ:R4)
GNDTV
UV_LIN(/JJ:L4)
GNDTV
SD/STID
FOMOI
8
8
3
2
XKN3015-
15
9
10
7
CN361
17
1
13
12
9
5
TVL
GNDA
15
14
14
6
4
JA5901
16
15
PF16PP-S25
9
8
VT+9
DCTR1(/JJ:NC)
16
DC FAN MOTOR
VXM1109
11
NC
VSS
VCC
RST
WCLK
WDO
WEN/DI
GNDTV
16
19R-1.25FJ
18
16
17
19
12
10
11
17
10
13
RDS
VD+5
RDSPOW
RDSCLK
RDSDATA
GNDD
XRESET
VS+6
STBYQ
18
18
17
VKN1775-
XKP3080-
18
NC
GNDTV
UVOUT
19
19
11
15
14
CN8904
7
CN5507
CN351
CN300
TV CONNECT ASSY (AWU8203)
B
B
19
12
16
AKP7131
CN5505
CN5504
CN471
XKP3069-
A TV MODULE ASSY (AWU8217)
11
CN5501
1.SWN
2.FLN
3.FLP
4.FRP
5.SWP
6.FRN
7.CP
8.SRN
9.SRP
10.SLN
11.CN
12.SLP
8
10
GNDRY
5
6
GNDX
FMDET
VSM
TXR
VX+9
TXL
GND
DO
CLK
DI
CE
GNDD
GNDD
RYRCONT
RYFCONT
XMUTEC
VD+5
3
4
SWPOW
XPROTECT
1
2
7
13
To SUBWOOFER
AKP7195-
XSWPOWDET
XSYSMUTE
VOLCLK
DSPMUTE
VOLDATA
XSWDET
GNDD
FM/AM
TUNER
MODULE
(AXX7170)
To SUBWOOFER
CN5506
52045-0745
A
ADD7493(11Pin FFC)
52045-1145
3.2 OVERALL WIRING CONNECTION DIAGRAM
4
5
6
7
8
PF04PP-S05
3
4
ADD7487(21Pin FFC)
5
6
AKN7075-
VKB1206-
HP OUT
Front AV IN
10
12
16
18
VFDP
FLDC- 19
20
GNDFL
GNDFL 21
17
15
16
13
14
12
9
11
10
JA702 AKB7170
19
18
17
16
15
AUDIO
INPUT OUTPUT
16
15
17
12
14
13
10
11
8
9
6
5
7
2
9
VSA-12
4
8
GNDA
3
7
VSA+12
1
6
GNDAV
52044-1745
HPL
GNDAV
SDET2
GNDAV
L
GNDAV
R
GNDAV
V
GNDAV
Y
GNDAV
C
GNDAV
5
VS+13
GNDHP
4
VAV+9
CN703
3
GNDD
20
HPDET
HPR
2
VI+5
CSTBY 10
1
21
7
ADD7494(17Pin FFC)
VO+5
CN702
22
B10B-PH-K-S
23
CN704
8
5
6
1
52044-1745
CN5201
JACK ASSY
M FRONT
(AWU8226)
14
PF10PP-S25
XKP3071-
VKB1190-
8
2
9
1
2
1
CN153
4
10
GNDD
VE+76
SWVION
VE+33
VE+56
DGRTN
5
3
8
VD+5
6
7
7
A
2
VSA-12 7
GNDA
VSA+12 9
GNDREG
VS+13 11
XSTBY
VE+76 13
GNDD
VE+6 15
VS+6
FLDC+ 17
REG ASSY
(AWU8225)
I
6
9
5
VS+6
VT+9
11
4
8
12
3
10
GNDTV
PO ON 1
FL ON
BEAT CUT
VSA+12
VA+5
14
13
2
15
1
3
GNDFL
VE+37
GNDTV
PO ON 1
FL ON
BEAT CUT
GNDAV
4
4
52045-2145
3
VFDP
CN151
2
VE+37
B10B-PH-K-S
B16B-PH-K-S
16
1
FLDC+
CN152
FLDC-
CN154
B4B-PH-K-S
CN202
1
3
4
5
6
7
14
8
52045-2145
13
12
11
10
9
10
12
AV 1
JA501
13
8
7
6
5
14
15
16
17
C C 1/2 - C 2/2
4
3
2
1
18
19
20
21
JACK ASSY (AWU8215)
XKP307123
GNDREG
VS+13
XSTBY
VE+76
GNDD
VE+6
VS+6
FLDC+
VFDP
FLDCGNDFL
GNDFL
11
9
B
VE+37
GNDTV
PO ON 1
FL ON
BEAT CUT
GNDAV
VSA-12
GNDA
VSA+12
2
CN705
AV 2
21
JA502
22
20
19
18
C
17
16
CN706
11
10
9
8
CN205
VE+15
1
1
VE+15
GNDA
2
2
GNDA
VE+6
3
3
VE+6
GNDSC
4
4
GNDSC
ADX7467
13
12
7
31
32
29
30
2
1
AKN1815-
CN2001
25
27
28
26
4
5
3
23
24
8
7
9
6
22
20
12
10
11
14
13
15
21
19
17
18
15
16
18
17
19
16
13
14
11
20
21
22
12
9
10
8
23
25
26
24
6
7
5
4
3
1
27
24
29
31
32
CN3001
28
CN701
1
30
3
2
2
5
4
VO+5
CLPOUT
GND
Y/VMtoT
GND
CMtoT
GND
Y/GMtoT
GND
Cb/BMtoT
GND
Cr/RMtoT
GNDA
ARMtoT
GNDA
ALMtoT
GNDA
Y/GTtoM
GND
C SYNCIN
GND
CrTtoM
GND
Y/VtoM
GND
C/CbTtoM
GND
ALTtoM
GND
ARTtoM
GND
AGCCTL
6
23
22
21
19
18
17
16
15
1
1
12
2
2
D D 1/5 - D 5/5
3
3
ADD7486(8Pin FFC)
4
4
5
5
14
13
CN201
CN4001
20
MAIN ASSY (VWV2013)
6
6
8
8
7
7
GND
VS+6
GND
VS+2.5
GND
VS+4
VS+4
VS+4
SUPPLY UNIT
Q POWER
(AWR7013)
15
14
D
11
10
9
CN4401
CN710
CN709
JA5001
VKB1207-
VKN1269-
2
VS+13
1
LED BLUE
2
LED AMB
3
CN5851
7
1
51048-0800
6
4
8
2
P
FLDC+
FLDCIR
VE+5
VFDP
GNDFL
4
5
6
7
8
51048-0800
KEY R ASSY
(AWU8222)
1
2
3
L ASSY
O KEY
(AWU8221)
ADX7469
VS+12
GND
3
GND
GND
2
GND
1
VS+5
VS+5
E
CN5105
1
2
3
4
51048-0300
D20PYY0305E
LIVE
CN101
F
51048-0300
N
CN5861
K
4
B4B-PH-K-S
1
3
4
GNDD
VFDP
FLDC+
4
5
VS+12
1
3
5
6
1
IR
FLDC-
6
GNDD
KEY1
3
GND
Vcc
Vout
5
3
1
2
2
7
GND
4
J5201
1
8
VKN1240-
KEY2
GNDD
ADD7492(9Pin FFC)
7
J5201
9
8
GND
3
VS+12
ADX7468
GND
9
52045-0345
DV
VE+5
GNDFL
KEY1
52045-0345
XTPB
TPB
GND
GND
7
DRIVE ASSY R7
(DVD-R/RW DRIVE)
(VXX2942)
PCMOUT
CN5101
CN5801
6
5
ADD7495(3Pin FFC)
4
3
XTPA
TPA
XTPA
2
1
VS+5
2
CN204
IR
B2B-PH-K-S
VKN1238-
CN5001
1
ATHB ASSY
(AWU8241)
F
ADD7496
(40Pin FFC)
2
ATWB ASSY
(AWU8240)
2
E
ADD7491
(7Pin FFC)
VE+5
2
4
6
1
3
1
3
3
5
7
D20PYY0840E
2
ADD7497
(40Pin FFC)
CN5102
3
J5202 J5202
4
CN707
5
CN706
CN4501
7
6
CN208
HDD 80G
4R080L0
(VXF1010)
8
NEUTRAL
IR ASSY
(AWU8227)
AC POWER CORD
ADG1154: WYXJ
ADG1156: WVXJ
LED ASSY
(AWU8223)
25
XV-DVR9H
5
6
7
8
C
B
E
F
1
R347
0
1000p
GNDTV
GNDTV
(PIF)
26
2
4.7k
B
C
E
SIF-AMP
GNDTV
(PIF)
SIF2
SIF1
TOP
Vp
GND
VCO2
VCO1
AFC
CVBS
CBL
TAGC
FMin
(SIF)
F306
1 2 3 4 5
GNDTV
GNDTV
C341
24
23
22
21
20
19
18
17
16
15
14
13
GNDTV
(SIF)
VTF1177-B
GNDTV
(SIF)
(PIF)
(PIF)
E
3
SAW Filter
C
B
1
C324
4.7k
C328
2200p
YB
R322
YB 470/6.3
C329
0.1 YB
2
0.01
F305 VTF1179-B
VCP1156- -T
10k
VR300 3
1 2 3 4 5
C327
E
C
BT(+31V)
IF
GNDTV
L301
VTL1096- -T
2125
Q303
UMF21N-TLB
15
AGC Adjust
V+5TU
IC302
GNDTV
GNDTV
YB
E2
C325
E2
C2
10k
R300
D301
UDZS33B-TRB
B
2SC4081(QR)-TLB
Q300
15 16 17 18 19
0.1
C311
(IF)
YB
21
20
E
C
GNDTV
C344
4p
UJ
0.1
Q303
UMF21N-TLB
77.8MHz
1K
R308 B
2125
VTL1096-A-T
1000/6.3
0.1
C307
2200p
C308
C305
AGC
BB(+5V)
AS
SCL
SDA
NC
+B(+5V)
E
23
22
4
6
AFC Adjust
L315
ATL7011
C313
CH
470/6.3
33p
CH
YB
33k
R302
D300
C
VXF1023-
C326
0
1
2
3
R312
VIF1
VIF2
STD
CvAGC
CsAGC
TPLL
LADJ
AF
Vdeem
Cdeem
CDEC
QSS
R324
4.7k
(IF)
C316
GNDTV
(SIF)
1
2
2125
3
C336 2.2 µ YB
4
C337 2.2 µ YB
5
R338 6
C338 0.22 µ YB
330 7
8
9
10
11
R343
R339
12
10k
0
D302
Q307
2SC4081(QR)-TLB
R320
4.7k
VTL1096- -T
2125
IF(38.9MHz)
33p
R307(L392)
VTL1081C315
L303
2200p YB
D
10k
1SS356-TRB (SIF)
C331
GNDTV
R325
GNDTV
R305
4.7k
YB
L306
(IF)
R319
GNDTV
0.47 µ
LCKAWR47J2520-T
GNDTV
4.7k
1k
10/50
C323
0.01
YB
C346
C343
27p
E
R333
YB
L314
C304
2200p
470K
11
220
C334
1000p
1000p
C
B
1k
C347
GNDTV
STBY
0.22
C335
C333
L305
LCKAWR22J2520-T
R336
CH
0
C303
33/25
R303
2
R345 R344
E
9
0
B
1 2 3 4 5 6 7
R337
C
15p
Q305
DTA124EUA-TLB
E
Q306
2SC4081(QR)-TLB
R318
B
R306(L391)
VTL1081-
R304
GNDTV
82
F304
1 2
VTF1180- -T
30.9MHz Trap
R313
B
0.68 µ
0
R332
GNDTV
Q310
2SC4082(P)-TLB
R335
470
L309
10K
R317
10k
R301
UV TUNER
Q311
RN1903-T
GNDTV
82
R342
(IF)
1000p
YB
R334
4.7k
E
2.7K
C
R341
Q302
2SA1576A(QR)-TLB
U301
1k
CH
F303
1 2
VTF1181- -T
40.4MHz Trap
C
C340
LCKAWR47J2520
0
(IF)
C
22p
C339
330
(IF)
A
R349
L311
0.47u
R340
E
Q312
2SC4082(P)-TLB
R346
C332
1000p YB
B
82
R348
(IF)
1
3
4
3.3 TV MODULE ASSY
1SS355-TRB
RN4903-TRB
Q301
C2
B
Q301
B2
E2
RN4903-TRB
V+5TU
B2
L304
ATH1109-
1mH
φ8
GNDTV
7p
CH
(T)
(T)
TDA9818TS-TBB
(SIF)
GNDTV
GNDTV
C2
B2
GNDTV
Q311
RN1903-T
GNDTV
L'AFC Adjust
GNDTV
PIF-AMP
A
XV-DVR9H
4
5
6
7
8
VE+37
A
L300
A
2125
TV MODULE ASSY
(AWU8217)
10/50
C301
0
(R399)
B2
2.2k
R311
C319
Q313(2/2)
UMF21N-TLB
1K
B
100/16
R310
C2
E
B
Q313(1/2)
UMF21N-TLB
C
VET+6
E2
VE+37
GNDTV
VET+6
CN300
XKP3080-
AGC
SCL
SDA
AFT
TUON
1
2
3
4
5
6
7
C322
C
B
8
YB
9
SIF
0.01
27K
12
13
LM/
LDASH
10k
R316
27K
11
P_SAVEBS
E
R315
10
(SIF)
14
15
16
(T)
C
Q315
DTA124EUA-TLB
E
B
C
470
E
GNDTV
GNDTV
D
(T)
GNDTV
C349
E
B
15P
CH
(T)
R331
C345
680
LCKAW330J2520-T
GNDTV
R329
L316
33u
1k B
R360
Q308
2
F301
VTF1183- -T
5.5MHz Trap
390
3
2SA1576A(QR)-TLB
C
E
270
1
0
R361
C
B
R327 R328
(T)
18
19
C
CN351
C330
0.1
L307
15u
2SA1576A(QR)-TLB
Q319
470
R323
GNDTV
17
UVOUT
2SC4081(QR)-TLB
Q309
B
GNDTV
GNDTV
0.1
R314
2SC4081(QR)-TLB
Q304
AGC
SCL
SDA
AFT
TUON
GNDTV
VET+6
GNDTV
VE+37
GNDTV
SIF
GNDTV
P_SAVEBS
LM/
LDASH
GNDTV
UVOUT
GNDTV
NC
GNDTV
(SIF)
(SIF)
SIF
(IF)
L: OTHERS
(PIF)
(T)
(SIF)
2
E
: IF Signal Route (TUNER)
: PIF Signal Route (TUNER)
: Video Signal Route (TUNER)
: SIF Signal Route (TUNER)
1
KN300
4 3
F
GNDTV
A
27
XV-DVR9H
5
6
7
8
1
2
3
4
3.4 TV CONNECT ASSY
18
C418
0.1
TS 10(2125)
(TV)
C433
1000p
C434
41:SCIR
40:NC/ASG
39:NC
38:NC
37:NC
44 43 42 41 40 39 38 37 36 35 34
AHVSUP 33
AVSUP
NC 32
AIN1+
SCOL 31
AIN1SCOR 30
TESTEN
VREF1 29
XIN
TP 28 R421
XOUT
DACML 27 0
TP
DCO1
DACMR 26
DCO0
VREF2 25 R420
0
ADSEL
TP 24
STBYQ
TP 23
100/16
17mA
R402
C416
10/50
TS
C410
3.3/50
JQ-TS
AGNDC
AHVSS
CAPLM
C409
0.1
0.1
AVSS
MONOIN
VREFTOP
0(2125)
X400
GNDTV
C417
C400
C404
0.1
100/16
AL-TS
4.7k
6p
1
0.1 2
C428 3
56p 4
5
R418
6
0
7
R430
8
0
9
10
11
1000p
GNDTV
C408
10/50
JQ-TS
C403
100/16
AL-TS
0.1
C406
0.1
R417
C432
GNDTV
GNDTV
C427 5p
C415
AL-TS
100/16
C429
D400
1SS355-TRB
TP
TP
TP
TP
DVSUP
DVSS
TP
16
C425
UVOUT
14
68p
17
12
E
C426
56p
(SIF)
E
120p
47p
0.1
15
P_SAVEBS
LM/
LDASH
47
C
B
C422
13
R412
15u
C430
SIF
47
L404
4.7u
4.5MHz
(SIF)
11
15µ
C424
C
VSS1189- -T
18.43MHz
8.2µ
C423
220
L403
9
10
R406
10k
L401
GNDTV
8
2SC4081(QR)-TLB
Q403
L402
R413 B
C431
0.01
7
100/16
AL-TS
E
0(2125)
C414
5
6
R407
GNDTV
470
R405
4
YB
3
C405
10
1608
R404
2
2SC4081(QR)-TLB
Q402
R416
12 13 14 15 16 17 18 19 20 21 22
(T)
GNDTV
SCL
SDA
R425
0
C
C438
0.1
GNDTV
19
R428
SCL
GNDTV
GNDTV
VE+76
0
R427
22p CH
C439 22p
R429
470
CH
470
SDA
C440
A
CN300
B
AGC
SCL
SDA
AFT
TUON
GNDTV
VET+6
GNDTV
VE+37
GNDTV
SIF(NC)
GNDTV
P_SAVEBS(JUST)
LM/(NC)
LDASH(NC)
GNDTV
UVOUT
GNDTV
NC
AGC
SCL
SDA
AFT
TUON
1
0.1
R401
XKP3069-
180p
CN351
MSP3417G-TBB
IC401
GNDTV
CONE
VT+9
VT+9
GNDTV
C407
VE+37
C402
C401
100/16
AL-TS
VET+6
2125
CTF1399- -T
L400
100
B
R400
C
Q400
2SD1664(PQR)-TRB
TV CONNECT ASSY
(AWU8203)
B
VT+9
VS+6
A
GNDTV
VET+6
IC451
BA06FP
IN
OUT
AL
10/50
C452
C453
1W
3.3
D
10/50
AL
R451
RDSCLK
RDSPOW
RDS
RDSDATA
GNDTV
VD+5
RDS
KN402
STBY
0
R432
STBY
R431
0
KN401
VNF1084
R5714
GNDTV
GNDS
C5711
10/50
C5712
270p
AL-TS
CH
X5701
100
ASS7004
16
1 QUAL
RDSCLK
2 RDSDATA
NC 15
14
3 VREF
XO
4
13
IC5701
RDS
XI
12
5 VDD1 BU1924F
VDD2
11
6 VSS1
VSS2
C5710
27p
CH
T2 10
T1
9
560p
CH
C5713
7 VSS3
8 CMP
C5709
27p CH
47/16
AL-TS
GNDS
0.01
C5707
GNDTV
C5708
E
GNDD
F
B
28
XV-DVR9H
1
2
3
4
5
6
7
8
A
R422
2.2k
2.2k
4700p
YB
GNDTV
R410
C420
C
1000p
C421
4
5
6
7
8
E
B
3
9
GNDTV GNDTV
C436
YB
GNDTV
0.01
R424
10
11
P_SAVEBS
LM/
LDASH
E Q406
2SA1576A(QR)-TLB
C
2.2k B
C442
GNDTV
Q401
2SA1576A(QR)-TLB
12
13
14
(T)
UVOUT
15
16
17
GNDTV
GNDTV
MUTE
MIONTA
GNDTV
18
19
GNDTV
R493
1
2
0
(TV)
3
4
5
0
6
7
8
SU/SAPID
9
10
11
12
13
14
RDSDATA
RDSCLK
RDSPOW
15
16
17
18
RDS
19
GNDTV
(T)
(TV)
(SIF)
C
VKN1775
FOMOI
SD/STID
R494
VD+5
B
CN471
VT+9
VS+6
(TV)
AGC
SCL
AFT
SDA
TUON
GNDTV
GNDTV
VE+76
GNDTV
VE+37
GNDTV
P_SAVEBS(JUST)
LM/(NC)
LDASH(NC)
GNDTV
UVOUT
GNDTV
MUTE
MIONTA
G 2/4 CN5503
C
2
FOMOI
SD/STID
GNDTV
UV_LIN(L4)
GNDTV
UV_RIN(R4)
GNDTV
SU/SAPID
DCTRI(NC)
VT+9
STBYQ(NC)
VS+6(NC)
XRESET(NC)
GNDD(NC)
G 2/4 CN5504
E
2.2k B
1
4.7k
0.01
R423
VE+37
R414
2.2k
4700p
YB
R408
C
4.7k
0.1
R415
(TV)
YB
E
B
Q404
2SA1576A(QR)-TLB
C413
100/16
R411
2.2k
VKN1775
AGC
SCL
AFT
SDA
TUON
1000p
4.7k
0.1
C412
R409
CN361
VE+76
C435
GNDTV
4.7k
C419
(TV)
R403
Q405
2SA1576A(QR)-TLB
C411
TS
VT+9
RDSDATA(NC)
RDSCLK(NC)
RDSPOW(NC)
VD+5(NC)
RDS(NC)
D
GNDD
: Audio Signal Route (TV)
E
: SIF Signal Route (TUNER)
F
B
29
XV-DVR9H
5
6
7
8
1
2
3
4
3.5 JACK ASSY (1/2)
Q
GNDAV
6
VSA+12
7
GNDA
8
GNDA
VE+6
GNDSC
C786
22/25
C785
0.1
C783
100/10
GNDAV
C
B
E
C
100
B
E
VSA+12
R783
C782 0.1
5
B
4
VS+13
STBY
VAV+9
Q783
2SC4097(PQR)
1k
3
VSC+5
GNDAV
Q781
2SA1577(PQR)
VAV+9
VS+13
C793
2
4
R782
VI+5
GNDD
3
Q782
DTC124EUA
CN153
I
1
2
VI+5
S10B-PH-K-S
VO+5
1
C 1/2 JACK ASSY (AWU8215)
C
VO+5
CN205
VE+15
CN706
CN702
S4B-PH-K-R
A
GNDAV
KN781
VNF1084-
KN782
VNF1084-
GNDAV
GNDAV
GNDAV
E
Q785
2SC1740S(QR)-T
1.8k
XCSTBY
E
0.1
C791
B
0.1
0.1
100/16
C225
C203
0.1
C202
2.2k
UDZS12B
100/16
R656
C 2/2
10k
6 –
8
5 +
R652
0
17
C789
R784
D782
D781 1SS355
0
7
IC651
BA4558F-HT
4
LOUTR
C 2/2
GNDA
15
(AI)
14
(AI)
VSA-12
VAV+9
13
AUDIO SELECTOR
(HP)
12
10
(HP)
GNDAV
7
AVLIN
AVLOUT
GNDHP
FUNC
XTHROU
BLANKIN
EXTRGB
3
1
CTRL
C620
C619
0.1
C622
100/16
C621
C608
10/50
SCVYIN
R218
330
30
3
E
B
C
Q205
2SA1576(QR)
ART2M
GNDAV
AVSIG
C 2/2
16
GNDAV
XV-DVR9H
2
10k
R226
ALT2M
M CN5201
C 1/2
VSC+5
SCRIN
AVSIG
17
15
14
12
13
11
9
7
3
5
6
10
C 2/2
CTRL
8
3
2
2
4
C 2/2
10/50
6
5
(L1) SCLIN
10/50
C610
2
3
3
(Y)
9
8
GNDAV
C616
(SO)
1
(R)
ROUT
10/50
C614
GNDAV
D705
D704
DF3A5.6FU
DF3A5.6FU
1 2
1 2
(HP)
11
AOUTMUTE
SAMUTE
MUTEMASK1
MUTEMASK2
R753
12
(L1)
(L2)
14
13
C607
10/50
100
15
R641
17
16
SDA
SCL
SWSTBY
SYNC
SYNCAFT
TEXTV
100k
18
(L2)
21
100p C623
CH
C624
100p
CH
(T)
23
22
0
GNDAV
10/50
C613
10/50
C609 10/50
R642
C615
1
C618
10/50
100k
UVOUT
(T)
(G)
OUT_G
GNDAV
100
(SO)
(C)
1
10/50
GNDAV
2C
C 2/2
VSA-12
2Y
VS+13
100
D706
DF3A5.6FU
C617
3
2
R633
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
CL
VDD
VREF
NC
ROUT
RBASS2
RBASS1
RTRE
RIN
RSELO
R4
R3
R2
R1
NC
DI
CE
VSS
TEST
LOUT
LBASS2
LBASS1
LTRE
LIN
LSELO
L4
L3
L2
L1
NC
CH
VI+5
4
19
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2V
5
20
100
R632
100
C625
100p
R640
R631
VSA+12
7
6
100/16
IC601
LC75342M-TBB
9
8
0.1
11
10
F
1
(B)
BOUT
0
16
4
S1/MUTEMASK2
X525P
AVLIN
AVLOUT
XPSAVE
FUNC
XTHROU
BLANKIN
EXTRGB
R651
C 2/2
10k
R654
R635
18
(B)
LOUTL
(LO)
4
R655
10k
(LO)
R639
CN809
L
AOUTMUTE
SDET1/SAMUTE
SDET3/MUTEMASK1
GNDAV
TVR
1
SDA
SCL
SWSTBY
SYNC
SYNCAFT
TEXTV
SDET2
2
(LO)
19
3 +
R653
0.1
20
XKP3071-
E
C788
100K
R617
(T)
21
1
(LO)
10k
TVL
23
22
CN705
EVOLCE
EVOLDATA
EVOLCLK
GNDAV
(T)
CN703
GNDTV
UVOUT
10/50
XKP3071-
52044-1745
GNDA
LOUTL
GNDA
LOUTR
GNDA
AINL
GNDA
AINR
GNDA
HPLO
GNDHP
HPRO
HPDET
RECMUTE
VSA+12
VSA-12
VI+5
VS+13
1.8k
BIN
8
HPDET
HPR
GNDHP
HPL
GNDAV
SDET2
GNDAV
L
GNDAV
R
GNDAV
V
GNDAV
Y
GNDAV
C
GNDAV
L
CN808
TVL
GNDA
TVR
0
10/16
100
CN704
R662
C636
R620
C654
Q602
DTC643TU
R618
100K
820p
B
C
C652
R604
IC651
BA4558F-HT
2 –
0.1
R
(G)
GNDAV
0
C642
R
JA702
GNDA
C653
L
C651
10/16
L
GNDAV
IN_G
GNDAV
(LO)
IN
IC202
BA178M09FP-TLB
IN
OUT
1
3
2
VSA+12
E
OUT
GNDAV
10/50
E
D
V+9V
GNDAV
C635
R619
B
820p
C641
R
(LO)
100
E2
R659
Q601
DTC643TU
C
R603
B2
Q784
RN4903-TRB
47k
C640
10/50
6
C2
GNDAV
47k
470p 470p
C644 C643
470p 470p
R
C604 C603
R602
100
L
4
R601
100
(AI)
R638 R637
IN
AUDIO IN/OUT
2
(R)
R/CIN
C
OUT
PCB
E
B
C639
10/50
3
5
C
RN4903-TRB
Q784
VSA-12
L
1
GNDAV
10/50
GNDAV
(AI)
C787
JA702
AKB7170
C792
100/16
10
C
XCSTBY
VSC+12
GNDAV
0
9
R694
VSA-12
0
B
R692
GNDAV
4
C 2/2
5
6
7
8
A
(CR)
(Y)
(CB)
0.1
2.2k
R234
10k
2k F
0
R245
(CR)
GNDAV
(G)
C
30
C
R230
0
(CR)
GNDAV
(R)
VSC+5
(CB)
R216
0
E
1.8k F B
(B)
R229
0
2.2k
0.1
R211
2.2k
(CB)
R214
0
Q207
2SA1576A(QR)
R235
RGB INTERFACE
(B)
R209
10/50
(Y)
GNDAV
R242
220 F R241
10/50
C228
V+5 3
OUT 2
SW 1
R228
0
29
V+9V
C238
0.1 YB
C227
4 IN 2
5 GND
6 IN 1
(R)
(G)
(B)
16
15
14
13
12
11
10
9
MatrixCont.
CB(U)
Y
Cr(V)
Vcc
YS 3
YS 2
YS 1
B
C
1.2k F
IC208
MM1501XN-TRB
Vin
Yin
Uin
CPin
GND
Rin
Gin
Bin
2.4k
0
C237
0.1 YB
0
(B)
(G)
R208
10/50
V+5 3
OUT 2
SW 1
1
2
3
4
5
6
7
8
C205 0.1
YB
C206 0.1
YB
C236
0.1 YB
R246
C204
0.1 YB
4 IN 2
5 GND
6 IN 1
10/50
C226
IC203
TA1287FG
R210
0
E
R236
0
R207
GNDAV
C223
(G)
C209
GNDAV
(R)
IC207
MM1501XN-TRB
(G)
Q206
2SA1576A(QR)
R233
1.2k B
F
0
R240 R239
V+5 3
OUT 2
SW 1
R213
4 IN 2
5 GND
6 IN 1
10/50
(B)
C230
100/16
C221
10/50
C222
C207
GNDAV
GNDAV
(R)
2.2k
2k F
0
GNDAV
(Y)
(B)
V+9V
IC206
MM1501XN-TRB
(R)
28
C
C229
100/10
0
R238 R237
R244
10k
C2
VSC+5
E
1k F B
V+9V
(G)
GNDAV
R206
10k
R205
C B2
Q805
2SA1576A(QR)
R231
(R)
C220
Q202
RN2903-T
B
Q202
RN2903-T
100/10
C201
0.1
E2
R232
DRVINR
DRVING
DRVINB
RGBO
E
0
R204
L201
LCYA220J2520-T
YIN
CBIN
CRIN
V+9V
VSC+5
GNDAV
Clamp Pulse
2.2u
Q704
C
2SA1576(QR)
B
D
CH 68p
C746
VSC+5
75F
E
CH 39p
680F
C747
GNDAV
(G)
(G)
R729
R727
47
L702
22u
L703
R726
GNDAV
R728
GNDAV
SYNC
VSC+5
(B)
C
Q703
2SA1576(QR)
C749
E
B
CH 18p
CH 18p
C741
680F
1k
R724
47
L701
22u
39p CH
R723
C742
(B)
1k
R725
GNDAV
R731
47
L704
22u
Q706
C 2SA1576(QR)
R221
0.1
8
7
6
5
C219
VCC
Rx/Cx
Cx
Q
C218
nA
B
nCLR
GND
C217
22k
C
1
2
3
4
6.8k
100p CH 100p CH
R227
220p CH
E
B
Q204
DTA124EUA
3.3k
C
100/10
C234
0.1
C213
220k
220p
R219
CH
E
B
0
3.3/50
B
R222
1k
C212
C215
330
2SA1576A(QR)
Q203 E
R243
DTC124EUA-TLB
Q201
LA7213
C
1 2 3 4 5
R225
10k
R247
GNDAV
VSC+5
TC7WH123FU-TRB
IC205
R224
IC201
4.7k
C214
C235
SYNC. SEP.
R220
GNDAV
GNDAV
0.1
VSC+5
100/10
GNDAV
(R)
E
B
C752
CH 18p
C751
680F
GNDAV
C216
R730
CH 39p
(R)
1k
R732
GNDAV
GNDAV
E
GNDAV
GNDAV
GNDAV
(T)
(R)
(G)
(B)
(Y)
(CB)
(CR)
: Video Signal Route
: Video Signal Route (R)
: Video Signal Route (G)
: Video Signal Route (B)
: Video Signal Route (Y)
: Video Signal Route (CB)
: Video Signal Route (CR)
GNDAV
(L1)
(L2)
(TV)
(LO)
(SO)
(AI)
(HP)
: Audio Signal Route (LINE 1 IN)
: Audio Signal Route (LINE OUT)
F
: Audio Signal Route (AUDIO SELECTOR OUT)
: Audio Signal Route (AUDIO IN)
: Audio Signal Route (H.P)
C 1/2
31
XV-DVR9H
5
6
7
8
1 YB
C736
1 YB
1
IN2
4
GND
5
IN1
6
VCC
3
OUT
2
SW
1
TEXTV
6dB AMP
GNDAV
GNDAV
32
2
C
B
3.9k
Q511
HN1C03FU(AB)-T
VI+5
GNDAV
Q511
HN1C03FU(AB)-T
C2
R583
B2
3.9k
GNDAV
E2
B2
Q508
2SC4081(QR)
E
GNDAV
IC702
MM1504XN-TRB
VI+5
C735
VO+5
R658
C2
GNDAV
B
GNDAV
F
C
E
E2
11 12 13 14 15
3
3.9k
E
GNDAV
GNDAV
GNDAV
VSC+5
C
GNDAV
C554
0.01 YB
C555
1 YB
GNDAV
GNDAV
27
5
6
A
CH1
CH0
7
VCC
8
4
C IN
GND
5
6 Y IN
(Y)
32
GND
VEE
INH
COM
E
YC MIX
IC503
MM1511XN-TRB
V+5
3
V out
2
NC
1
GNDAV
C537
100/16
C525
22p CH
44
MUTER
AoutR3 43
42
AoutL3
41
MUTEL
40
Aout1R
39
Aout1L
38
GND
AIN5R 37
36
AIN5L
35
BLNK
34
AIN4R
33
AIN4L
32
GND
31
Aout2R
30
Aout2L
29
(Video)V+5
28
VIN5
27
GND
Vout2 26
Vout1 25
24
(CTL)V+5
23
VIN4
R521
C523 1000/6.3
470
(LO)
(L1)
(TH)
GNDAV
B
GNDAV
C 1/2
23 25
0
24 26
GNDAV
D 2/5 CN2001
C 2/2
XV-DVR9H
4
75F
R548
R546
22k
56k
(LO)
R523
22k
R524
22k
Lout
R547
Q501
2SA1576A(QR)
R501
100k
C513
CH 470p
470
R502
0
0.01
C522 1000/6.3
C524
0.01 YB
YB
C517 22/25
C521 R531
22/25
C511
C518 22/25
C512 22/25
C506 22/25
22/25
C505
R509
0
22/25
C501
R585
R510
0
22/25
R586
C502
R504 22k
C514
470p
CH
R545
330
R550
RGBO
XRGBI
Vout
GND
VIN1
PWRSAV
AMUTE
AIN2R
AIN2L
REFFIL
VIN2
V+12(Audio)
AIN3R
AIN3L
GND
VIN3
CTL01
FUNC
SDA
SCLK
AINIR
AINIL
IC501
LA73026AV-TBB
R503 22k
R522
100k
C520 CH
470p
75F
3
0
R540 470
C538
0.22
R542
R541 470 22p CH
C526
(T)
1/50
C528
(LO)
NP
YB
C532
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
(L1)
17
GNDAV
SDA
SCL
0.01
C530 NP
(TV)
NP 10/16
C529 10/16
TVL
C527
UVOUT
YB
YB
TVR 0.01
C534
10/16
0.01
C533 NP
10/16
C531
LOUTL(LO)
LOUTR
SCVYIN
RGBO
10/16
C536 NP
C535 NP (LO)
10/16
SCLIN
C516
1000p
(L1)
47k
R560
B
SYNCAFT
HN1C03FU(AB)-T
Q510
R580
0
C552
100/10
1SS355
(LO)
C553 0.1
R584
C 1/2
0.1
E2
SCRIN
GNDAV
(Y)
GNDAV
(LO)
ART2M
STBY
GNDAV
ALT2M
1SS355
3.9k
(C)
D584
GNDAV
C551
1SS355
CH
C515
1000p
CH
C519
470p CH
0
R535 R534
C 2/2 JACK ASSY (AWU8215)
Q702
HN1B04FU(YGR)-TLB
GNDAV
C2
R722
8.2k
D581 R581 B2
C738
47p
R582
R575 75F
15
ROUT
VSC+12
Q509
GNDAV DTA124EUA
D533
GNDAV
GNDAV
22/50
3
(B)
19 22
CH
DF3A5.6FU-TBB
(G)
GNDAV
68
GNDAV
R517
1k
220
Q513
2SC4081(QR)
2
R519
0
BOUT
EXTRGB
3
1
Q702
HN1B04FU(YGR)-TLB
C739
Q514
DTA124EUA
2
R525
470
GOUT
R588
AOUTMUTE R587
22k
0
C
MUTEMASK2
B
2
3
R518
1k
CH
R719
D585 R578
1SS355
0
2.2k
GNDAV
3
1
1
R520
0
C737
100p
R720
B
R718
D512-D522:
2
2
R527
100
(C)
Q506
DTC124EUA
3
1
3
R530 0 R528 100
COUT
0
(B)
R573 75F
R574
75F
GNDAV
C549
CH 470p
0
YOUT (Y)
D586 R590
1SS355 0
3
1
(B)
18
(R)
20
(G)
GNDAV
R/Cin
Gin
Bin
19
18
75F
(L1)
CLPOUT 2
3
GND
Y/VM2T 4
5
GND
CM2T 6
7
GND
GM2T 8
9
GND
BM2T 10
11
GND
RM2T 12
13
GNDA
ARM2T 14
15
GNDA
ALM2T 16
17
GNDA
(GT2M) 18
19
GND
CSYNCIN 20
21
GND
CrIN 22
23
GND
Y/CVBSIN 24
25
GND
C/CbIN 26
27
GND
ALT2M 28
29
GND
ART2M 30
31
GND
AGCCTL 32
R597
22k
C
2
2
(R)
16
0
(LO)
1
R596
1
(L1)
CN701
E
Q512
DTC124EUA
1
R559
(G)
R529
0
VKN1815-
3
2
21
R/CIN
IN_G
BIN
17
C550
470p CH
1
GNDAV
Q510
HN1C03FU(AB)-T
R533
21
D517
20
D522
(R)
D582
13
1SS355
12
C
10
B
11
D521
R558
D516
9
C
2
3
D515
8
D520
7
0.1
SAMUTE
R576
31
Rout
V+5V
SCVYIN
3 1
1
E
B
E
6
R599
0
5
47k
23
R598
14
C561
220/16
4
R579
0
2
C734
E
3
47k
D
2
D514
22
(LO)
0
R721
R589
1
D519
C
D512
Rout
Rin
Lout
GNDA
GNDV
Lin
Bin
FUNCTION
GNDV
N-LINK
Gin
NC
GNDV
GNDV
R/Cin
BLANK
GNDV
GNDV
Vout
V/Yin
GNDV
2
0
D518
B
JA502
D583
AKB7157-
1SS355
AV2
from STB
0
A
0
MUTEMASK1
1
4
3.6 JACK ASSY (2/2)
(TH)
INPUT1
R526 470
VSC+5
(TH)
(C)
(LO)
1.2k
E
C
R532
GNDAV
0
GNDAV
3
GNDAV
VSC+12
C 1/2
VSC+5
Channel Analog Multiplexer
IC502
TC7W53FU-TRB
4
3
2
1
GNDAV
16
VSC+5
GNDAV
(C)
(Y)
(CR)
(CB)
5
6
7
8
A
(LO)
C546
470p CH
CH
470p
C503
470p CH
C504
D510
1SS355
(LO)
(TH)
(B)
(B)
75F
(R)
13
(G)
CH
1000p
R539
12
14
C510
CH
1000p
C509
100k
470p
(G)
15
C507
R515
C508
10
11
CH
470p
CH
R516 100k
0
R556
D505
1SS355
D506
1SS355
0
16
GNDAV
17
18
GNDAV
R562
GNDAV
19
20
0
21
23
2
2
3
2
1
3
3
D523-D532:
1
2
2
3 1
D528
1
D529
D531
D530
3 1
2
1
C
3
2
D524
D527
0
0
R713
0
R714
1
1 2
D526
D532
2
3
R715
GNDAV
1
R563
100k
R564
100k
R567
E
C559
220p
E
GNDAV
2SC4081(QR)
Q503
CH
B
C557
220p
220
B
CH
AVLIN
FUNC
C
AVLOUT
R566
C
E
D511
1SS355
3
3
DF3A5.6FU-TBB
(Y)
(T)
(R)
(G)
(B)
: Video Signal Route (R)
: Video Signal Route (G)
: Video Signal Route (B)
(Y)
(C)
(CB)
(CR)
(L1)
(TH)
: Video Signal Route (C)
: Video Signal Route (CB)
: Video Signal Route (CR)
(TV)
(LO)
(SO)
75F
RN4903
E2
C B2
D
E
(B)
B C2
C B2
E
6
B C2
UMF21N
E2
C B2
E2
(G)
E
B C2
E
B C2
VI+5
(Y)
10k
(R)
(C)
E
0.1
100/10
GNDAV
(C)
(Y)
: Audio Signal Route (for SCART through)
F
: Audio Signal Route (AUDIO SELECTOR OUT)
C 2/2
33
XV-DVR9H
5
E2
VC
R706
1000/6.3 75F
(B)
C728
R710
75F
(G)
R711
1000/6.3
C729
1000/6.3
C B2
0.1 YB
SDA
SCL
(C)
65.COUT
64.GND
63.YOUT
62.VCCO
61.GND
NC(GND)
Y4IN(2Y)
VCCEV
BIN
VCCEV
NC(GND)
NC(GND)
GND
VOUT
GND
ASPECT
GNDAV
(CB)
C 1/2
C722
C711
100/10
0.1
R703
100
ROUT
C714
BOUT
(CR)
2-B4,3-B3
UVOUT
OUT_G
C 1/2
0.1 YB
C721
(T)
CTRL
1 2 3
E B C2
6
60
59
58
57
56
55
C727
54
0.1
DRVINB
53 YB
52
DRVING
51
50
C726
0.1
YB
49
48
47
46
DRVINR
45
C724
44
C725
0.1 YB
0.1
YB
43
42
C723
41
C720 100/10
YB
0.1
C710
C718
0.1
YB
C709
2V
SWSTBY
(Y)
38.EXTRGB
39.ENC_V
40.OUTREG
C708 0.1 YB
R704
100
(C)
SYNC
0.1 YB
C707
0.1 YB
D702
SCVYIN
21.V6IN
22.GND
23.DEC_V/G/CB
24.GND
YB
C706
80.NC(GND)
79.Y2IN(3Y)
78.NC(GND)
77.Y3SIN(1Y)
(CR)
PY/R/SCOUT
GND
CR/GOUT
GND
CB/BOUT
VCCO
NC(GND)
ENC_CB/B
GND
ENC_CR/G
VCCO
NC(GND)
NC(GND)
NC(GND)
NC(GND)
ENC_PY/R
VCCO
ENC_Y
GND
ENC_C
3
C 1/2
CTRL
C B2 E2
6 5 4
5
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
CRIN
0.1 YB
C705
0.1
4 7
8
DEC_C/R/CR
GND
DEC_Y/V
GND
DEC_B
AGCCTLV
GND
SDA
SCL
VCCO
AGCCTLY
CSYNCOUT
SYNC2OUT
(R)
C704
(CB)
9
(CB)
(C)
YB
VYIN
NC(GND)
C4IN(2C)
NC(GND)
C3SIN(1C)
NC(GND)
C2IN(3C)
VCCEV
R/CRIN
VCCEV
G/CBIN
VCCEV
V2IN(3V)
GND
V3SIN(1V)
NC(GND)
V4IN(2V)
STBY
V5IN(UV)
INREG
C713
100/10
0.1
R/CIN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
(CR)
GNDAV
C702 0.1 YB
2C
0
R712
10
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61
(Y)
C701
C730
R716
0
IC701
LA73033M
YIN
(R)
0.1 YB 2Y
C731
0.1 YB
C733 SCVYIN
R717
R701
VIDEO SELECTOR
& VIDEO DRIVER
VSC+5
0
VI+5
GNDAV
AVSIG
AVSIG
CBIN
B
0.1
220k
B
27k
47k
R568
2.2M
R565
4.7k
R570
R571
2SC4081(QR)
Q505
C
Q504
2SC4081(QR)
BLANKIN
C542
1
XTHROU
0
R544
100/16
0
R543
100/16
C540 1
C541
C539
VSC+5
GNDAV
GNDAV
C558
D523
GNDAV
GNDAV
Rout
Rin
Lout
GNDA
GNDV
Lin
Bout
FUNCTION
GNDV
N-LINK
Gout
NC
GNDV
GNDV
R/Cout
BLANK
GNDV
GNDV
V/Yout
V/YIN
GNDV
GNDAV
VSC+5
VSC+5
7
D525
D503
R554
6
8
(R)
VSR1017RY501
150
GNDAV
D501
RB501V
1SS355
D502
E2
1SS355
VSC+12
R569
C2
150
R553
1SS355
1
10
2
9 GNDAV
3
8
4
7
5
6
C
0
VSC+12
D504
B
5
9
R511 R513
1k
3
4
R577
0
R551 0
R557
C547
0.1
2
1
E
1
Rout
Lout
0
GNDAV
R512 1k R514 0
GNDAV
R552
0
R505 R507
100
0
AV1
to TV(RGB)
22
2
RN4903-TRB
Q502
R549 0
R506
100 R508 0
VSC+12
Q502
RN4903-TRB
JA501
AKB7157-
R538 0
8
7
6
5
IC504
TC7W53FU-TRB
GNDAV
B2
VCC
CH0
CH1
A
D508
COM
INH
VEE
GND
1SS355
1
2
3
4
R536 75F R537 0
D509
1SS355
D507
(TH)
C545 470p CH
VSC+5
C556
0.1
(TH)
1SS355
R561 0
(LO)
7
8
1
2
3
4
3.7 MAIN ASSY (1/5)
A
D 5/5
D 4/5
D 2/5,4/5
D 2/5
B
D 2/5
D 2/5
C
1 chip System Codec
M65673WG-A
D
E
(D)
F
D 2/5,4/5
D 1/5
34
D 4/5
(AT)
(D)
D 3/5 D 5/5
D 3/5
XV-DVR9H
1
2
3
4
5
6
7
8
ASSY
D 1/5 MAIN
(VWV2013)
A
FLASH ROM
VYW2176
B
C
IC1104
TC7SZ126FU-TLB
1
5 VCC
2
R1104
R1105
10k (S)
100 (S)
4
GND
3
Backup SRAM
D
D 2/5
E
(AT)
(D)
: ATA Data Signal Route
F
: Audio Signal Route (DIGITAL)
: Audio Signal Route (L ch)
D 1/5
35
XV-DVR9H
5
6
7
8
1
2
3
4
3.8 MAIN ASSY (2/5)
A
D 2/5 MAIN ASSY (VWV2013)
B
C
D
D 1/5
D 1/5
E
D 1/5
D 1/5
D 1/5
F
D 1/5
D 2/5
36
XV-DVR9H
1
2
3
4
5
6
7
8
A
7
D 3/5
17
4
B
16
15
D 1/5
C 2/2 CN701
3
D 3/5
5
9
C
10
6
8
13
12
11
D 1/5
D
D 3/5
E
D 1/5
D 1/5
F
D 2/5
37
XV-DVR9H
5
6
7
8
1
2
3
4
3.9 MAIN ASSY (3/5)
D 2/5
680
R3026
A
RB501V-40-TRB
D 2/5
(D)
(D)
VKN1814
D 4/5
B
D 2/5
D 4/5
(D)
14
C
(D)
D 4/5
(D)
D
G 1/4
CN801
D 1/5
(D)
E
D 1/5
18
D 4/5
F
D 3/5
38
XV-DVR9H
1
2
3
4
5
6
7
8
A
D 1/5
(D)
B
D 2/5
C
D 2/5
D
E
D 2/5
D 1/5
AK5357VT-TBB
F
D 3/5
39
XV-DVR9H
5
6
7
8
1
2
3
4
3.10 MAIN (4/5), ATWB and ATHB ASSYS
A
MM1603DP
Q
CN201
D 3/5
D 3/5
B
C
D
D 5/5
D 1/5, 2/5
D 5/5
D 1/5
1
D 3/5
E
2
D 1/5, 2/5
D 1/5
F
D 4/5
40
XV-DVR9H
1
2
3
4
ATWB ASSY
(AWU8240)
40
1
39
2
38
3
37
4
36
5
35
6
34
7
33
8
32
9
31
10
30
11
29
12
28
13
26
15
25
16
24
17
23
18
22
19
21
20
20
21
19
22
18
23
17
24
16
25
15
26
14
27
13
28
12
29
10
31
9
32
8
33
7
34
6
35
5
36
4
37
3
38
C
2
39
1
40
GNDD
GNDD
1
1
3
3
2
2
4
4
5
5
7
7
9
9
6
6
8
8
10
10
11
11
13
13
15
15
17
17
19
19
21
21
23
23
12
D
12
14
14
16
16
18
18
20
20
22
22
24
To HDD
CN708
B
11
30
VKN1879- -TBB
To DRIVE ASSY R7
27
14
24
25
25
27
27
29
29
31
31
33
33
35
35
37
37
39
39
26
26
28
28
30
30
32
32
34
E
34
36
36
38
38
40
40
GNDD
F
CN709
(AT)
ATAPI BUS
A
VKN1816-
E
: ATA Data Signal Route
CN707
D 1/5
8
CN710
(AT)
7
VKN1816-
6
VKN1879- -TBB
5
GNDD
ATHB ASSY
(AWU8241)
F
D 4/5 E F
41
XV-DVR9H
5
6
7
8
1
2
3
4
3
4
3.11 MAIN ASSY (5/5)
A
D 1/5
B
C
IC5101
UPD72852AGB-8EU-A
D
J
E
IC5101
CN5001
F
D 5/5
42
XV-DVR9H
1
2
5
6
7
8
A
D 1/5
D 4/5
B
D 1/5
C
IC5202
UPD72893BGD-LML
D
D 4/5
E
D 1/5
D 1/5
F
D 5/5
IC5204 K4S161622D-TC80
43
XV-DVR9H
5
6
7
8
1
2
3
4
3.12 CONTROL ASSY (1/4)
D 3/5 CN3001
VS+13
GND
23
24
22
20
19
GNDD
VET+5
(C967)
1
R967
0
R966
100k
GNDD
R892
39K
R944
P_SAVEBS
D992 ISS355
D993 ISS355
D994
4.7k
0.1
R905
DATA_D_TO_T
0
C834
1u
SWVION
GNDTV
C910
0.01 F
TUON
DATA_T_TO_D
P_CONT
ISS355
IC950
TC7WU04FU-TRB
1
VET+5
8
6
VTL1081- -T
2
R972
470
C960
0.01
YB
IC950
TC7WU04FU-TRB
100
R970
10
L951
10
R968
1M
X950
CH
22p
C959
IC950
22p CH
4
4.43MHz
VSS1176- -T
5
C958
0.1
3
8
TO-PTCOM
GNDD
TC7WU04FU-TRB
37
4.7K
R914
4.7K
R913
8
VCC
7
WP
6
SCL
5
SDA
R915
100
R916
R918
R917
100
R919
100
100
100
ASCKSYS
VET+5
R912 22
IC804
R911 22
SSM_TO_TSYS
R910 22
SSM_TO_T
HSM_TO_T
SCLEEP
SDAEEP
WRT
ASCK
GNDD
BR24L32F-W-TBB
1
A0
M24C16
2
A1
EEPROM
3
A2
4
GND
8
4
R969
C957
R931
0
7
4
SAMUTE
38
IC805
TC74HCT7007AF-TBB
1
2
3
4
5
6
7
VCC
GND
14
13
12
11
10
9
8
C837
0.1
CN807
GNDD
GNDD
SYS
G 2/4
F
G 1/4
44
XV-DVR9H
1
2
E
C
R957
ISS355
D995
VET+5
0.1
1.5K
FLPOW
ISS355
G 4/4 TU-COM
G 2/4,3/4 UIF
C836
560p
B
UV
GNDTV
Q911
DTC124EUA
AFT
XP_SAVE
22
CE
1
EVOLCE
DATA
EVOLDATA 2
CLK
3
EVOLCLK
SDA
SDA 4
SCL
5
SCL
SWSTBY
SWSTBY 6
SYNC
7
SYNC
SYNCAFT
SYNCAFT 8
9
TEXTV
SDET2
10
SDET2
11 AOUTMUTE
AOUTMUTE
SDET1
SDET1/SAMUTE 12
13 SDET3
SDET3/MUTEMASK1
S1 R981 0
S1/MUTEMASK2 14
15
X525P
AVLIN
AVLIN 16
17 AVLOUT
AVLOUT
XP_SAVE
XPSAVE 18
19 FUNC
FUNC
XTHROU
20
XTHROU
BLANKIN
21
BLANKIN
EXTRGB
EXTRGB 22
23
CSTBY
0
R904
R909
D991
G 2/4
R908 100k
21
XKP3071-
R903
R906
AGC
FUNC
100k
ISS355
D990
20
C835
CEHAZA101M10-T
10/50
C911
3.9K
330
19
HSM_TO_TSYS
17
18
100
CH
1K
0.1
C956
Q952
R952
0.1
C952
Q951
2SC4081(QR)-TLB
C953
R955
470
VS+13
GNDHP
VSA-12
VI+5
RM
R902
R960
AL
6.8k
CN804 (T)
L
R901
0
XRST_D
R907
30
23
R900
100
VSA+12
HR
15
16
10/50
GNDD
R899 100
STBYQ
LM/
I/BG
XP_SAVE
TUON
RSTCTL
C833
14
1.2k
HL
13
HN1C01FU(YGR)-T
R959
(HP)
12
820
R962
11
E2
C955
E
R963
R953
1.5k
(AI) AR
R961
0.1
AL
9
10
2.2k
C954
8
R958
7
C2
B
E
100K
CH 10P
470
C951
L950
LFEA
47u
R951
Q952
B2
(LO)RC
C
C
B
HN1C01FU(YGR)-T
5
CN806
330
LC
6
L
R950
TR
3
4
B
R954 C
3.3k
2
Q950
E
0.1
TL
1
TVL
GNDA
TVR
GNDA
LOUTL
GNDA
LOUTR
GNDA
AINL
GNDA
AINR
GNDA
HPL
GNDHP
HPR
HPDET
RECMUTE
VSA+12
VSA-12
VI+5
VS+13
GNDTV
UVOUT
C950
XKP3071- (TV)
15K
R897
0
VET+5
R898
I/BG
DTA124EUA-TLB
CN803
E
VI+5
BUP
MRST
SST_TO_M
SSM_TO_TSYS
P_CONT
HSM_TO_TSYS
HST_TO_M
UHP
G 2/4,3/4
D
21
18
16
15
17
14
12
13
7
9
11
8
10
4
6
5
3
ASCKSYS
G 2/4-4/4
C
VS+13
(D)
JACK
B
G 1/4 CONTROL ASSY (AWU8202)
SPDIF
GND
ASCKSYS
GND
HST_TO_M
GND
SST_TO_M
GND
SSM_TO_TSYS
DISCHARGE
HSM_TO_TSYS
GND
PCMOUT
GND
MRST
RAMUTE
X525P
LAMUTE
XRST
MUTE
V+5VI
BUP
2
1
(D)
(D)
XRESET
G 4/4
SPDIF
CN801
PCMOUT
2
STBY
VKN1255-
GND
1
CN802
B2B-PH-K-S
To DRIVE ASSY R7
0
A
3
4
VET+5
1u
C802
R801 100
R802 0
R803 0
R804 100k
R805 0
R806
C811
47p
CH
C814
47p
CH
C815
47p
CH
0.1
Q808
2SD2114K(VW)-TLB
2SC4081(QR)-TLB
Q802
22K
10K
GNDD
VPP
D
GND
XDLRST
BUSY
4 SCLK
5
RXD
6 VPP
7
TXD
8 PGM
9
VE+56
52045-0945
from DOWN LOAD
1
3
VPP
TXD
PGM
10K
C808
TUC-DOWN
0.1
C803
BUSY
SCLK
RXD
10K
R832
GNDD
GNDD
1k
E
(TV)
BT801
LITHIUM
BATTERY
VEM1034
(LO)
(D)
GNDD
(AI)
GNDD
100p
R847
YB
YB
YB
C813
100p
0.1
0.1
0.01
GNDD
CH
1u
C810
C840
C841
GNDD
CH
C809
R831
R825
10K
AVLOUT
SCL
SDA
1SS355
R830
10K
BUP
ST801:VKX1015-
+
GNDD
Lithium
Battery
VNF1109
KN801
Q804
DTC124EUA-TLB
R852
GNDD
BUSY
SCLK
RXD
TXD
C812
100
100
100
100
1k
C
E
R846
10K
R833
R834
R835
R837
R838
E
B
CH 100p
C816
C
2
2SC4081(QR)-TLB
C
R824 B
Q801
10
E
(T)
801
RTC
C821
Q807
B
C
B
C
VE+33
D802
R828
100
R829
100
22K
R874
0.1
C825
E
D801
RB501V-40-TRB
C806
CH
12p
R827
8 VSS1197VCC
7 32kHz
OSCIN
6 X802
OSCOUT
5
XINTRA
E
VE+56
470
C909
0.01 F
XINTRA
C908
18p
P_DOWN
1
XINTRB
2
SCL
3
SDA
4
VSS
C
CN805
R818 680
R819
680
R820
10K
R821
PSAVEMUTE
C907
18p
LATCH_D
R817 10k
100k
R823
JUST
SYNCAFT
AVLIN
SYNC
SCL
SDA
XINTRA
VET+5
IC802
RS5C372A-TBB
D804
1SS355
10K
R862
0.1
MRST
10K
Q803
DLCONT
100
0
TU-COM
B
B
100p
CH
0
XSCK_D
X803
CSS1599
GNDD
VET+5
VET+5
VET+5
GND
Q901(2/2) E2
RN4903
R871
22K
R826
28.SCL
29.SDA
0
1
2
3
4
5
6
7
0
R807
8
9
0
100 10
R946
R808
11
100
12
R809 1.5k 13
14
15
R810
16
10K
17
R811 100k 18
R812
19
20
0
21
22
23
24
25
26
R815
27
0
28
29
XINTRA
LED_HDD
LED_DVD
HSTTOA
FANPWM
GLINK IN
GLINK OUT
NC
AVLinkOUT
0
XSCK_TTOA
SYNC
AVLinkIN
IR
J_CLOCK
SYNCAFT
BYTE
PGM
NC
LATCH_D
XRESETIN
XOUT
GND
XIN
VCC
NMI
JOGA
SLICEONfb
COMPMUTE
NC
SWSTBY
SWVION
EXTRGB
NC
SCTHRU
BS15SRT
DLIF3
DLIF2
DLIF1
GND
SDET1
VCC
SDET2
SDET3
LDASH
XRESET
SD/STID
SU/SAPID
MUTE
DCTRI
HSM_TO_T
HSATOT
P_CONT
M1ONTA
FOMO
P_SAVEBS
113.CVIN1
114.GND
115.FSCIN
116.SSTTOA
0
TUNER COM
B2
GNDD
0
0
0
0
IC801
PEG014A-K
RN4903
RSTCTL
0
0
0
VOLDATA
VOLCE
SCLEEP
SDAEEP
WRT
DLCONT
HSTTOH
SCK
SSMTOT
SSTTOM
BUSY
SCLK
RXD
TXD
SLICEON
M1
M2
VDD2
LP4
LP3
LP2
GND
0
S1
DLCE
VOLCLK
58.XTHROU
57.BLANK
56.SQU
55:LET
0
88.STBYQ
89.LM/
90.I/BG
91.XP_SAVE
C
0
NC
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
R869
0
TUON
NC
RSTCTL
XRST_TTOA
MODEL1
MODEL2
AGC
FUNC
KEY2
KEY1
C/N
GND
AFT
VREF
AVCC
SSATOT
VDD1
SYNCTEXT
SLICE
GND
VDD3
E
B
C2
C
GNDD
DTA124EUA-TLB
R863
GNDD
PST3245-TLB
IC803
VET+5
XTHROU
R872
58
57
56
55
54
53
R848
CLK
52
R849
DATA
51
R850
CE
50
R851
SCLEEP
49
R853
SDAEEP
48
R854 0
WRT
47
R855
DLCONT
46
R856
HST_TO_M
45
R857
ASCK
44
R858
SSM_TO_T
43
R859 0
SST_TO_M
42
41
40
39
RXD1
C842
38
TXD1
0.1
37
36
L801
VTL1081- -T
35
34
R839
R842
33 R836
1k R840 1k R843
32
R841
1k
1k R844
31
120
390
30
B
Q901(1/2)
DTA124EUA-TLB
E
E
GNDD
GND
3
4 NC
IN
2
NC
OUT
1
5
B
R867
R865
R866
100K
R864
VET+5
C820
C
0
D803
1SS355
BLANKIN
C824
0.1
R845
0
10K
DTC124EUA-TLB
Q806
R860
STBY
PSAVEMUTE
0
88
89
90
91
92
93
94
R920 95
100 96
97
98
99
100
101
102
103
R921 104
100 105
106
R922 107
100 108
R923
109
110
111
R924
112
R925 113
114
R926 115
116
R927
100
C843
CEHAZA101M10-T
R928
VET+5
E
VET+5
1u
C822
SAMUTE
C 2SD2114K(VW)
Q805
B
C830
1u
R886 100k
A
C819
0.1
SDET2
1u
R889 1k
R977
C829
R976
220
220
220
R975
100
R887
VE+56
R861 100k SWSTBY
SWVION
EXTRGB
C817 CEHAZA101M10-T
P_SAVEBS
100
R879
P_CONT
DCTRI
100
0 R883
R884
100
0 R896
100K
100K
R895
8
0
0
R894
7
VET+5
XRDY_D
R876
100
R875
HSM_TO_T
6
LDASH
XRESET
5
(HP)
GNDS
F
G 1/4
45
XV-DVR9H
5
6
7
8
1
2
3
4
4
5
22k
R5621
Q5622
22k
R5624
22k
R5622
82
81
2SC4081(QR)
1k
DTSDMIX
SI
SO
220
R5567
R5568
SYSPOW
XSCK
220
220
52
XSCK_D
R5551
R5552
R5546
R5548
R5549
R5550
41
LEDAMB
42
220
RYR
43
220
RYFSC
44
220
XFLRST
45
220
46 FLPOW
LEDBLUE
0.1
220
DATA_T_TO_D
43
44
45
41
1
E
C
E
B
10k
R5605
1k
79
22
85
94
68
43
96
97
220
220
220
220
220
220
220
220
220
D5521 1SS355
DIMMER
GNDS
GNDD
TO SUB WOOFER
G 2/4
46
XV-DVR9H
2
3
4
G 1/4,3/4
SYS
UIF
UDS
G 1/4
220
G 3/4,4/4
1
2
AKP7195-
CN5506
GNDRY
VD+5(VRY+5)
2
GNDD
REMOUT
11
DSPMUTE
VOLCLK 12
13
XSYSMUTE
XSWPOWDET 14
15
XPROTECT
SWPOW 16
19
R5612
R5610
R5611
R5609
R5613
R5614
R5615
R5616
3
4
P_DOWN
D5508 D5519:UDZS8.2B
D5502
D5503
D5504
D5505
D5506
D5507
D5508
D5510
D5511
D5512
D5513
VES+56
9
42
6
7
5
GNDD
GNDD
(GNDLED)
5
18
R5608
7
8
4
41
44
90
R5606 220
9
B
C5530
STBY
0 (1/10)
0.1
C906
0.1
C905
11
R5632
0
DSPMUTE
10
(D)
DOUT
GNDD
UIF
R5607
12
GNDD
C
E
USW
G 4/4
(D)
DIN
B
Q5502
UN5212
3
13
45
26
27
28
0.1
Q5503
2SB1689-TLB
VD+5
(VRY+5)
IC901
BA178M05FP
IN
OUT
C5531
VES+56
GNDD
XMUTEC
RYFCONT
RYRCONT
14
10k
Q5504
2SC4081(QR)
47k
0
(1/10)
R947
R948
15
48
VE+5
R5604
R5600
100
R5662
0
R5661
120
VKN1246-
R5542
10k
GNDD
R5602
VS+13
VE+5
CN5502
C
10k
POWER_DOWN_DET
GNDD
E
VE+56
R5541
UTEST
E
C5528
ACH1246
C5526
0.1
C5525 0.01
22u
VS+13
1
2SC4081(QR)
Q5621
68
47k
R5570 47k
220
220
R5572
1k
R5599
R5581
R5571
R5569
80
79
85
220
220
220
220
R5595
R5596
R5597
R5598
83
85
84
RDSPOW
XSWPOWDET
47
220
48
220
49
50
R5553
220
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
TXCE
WSEL
TXODATA
FLASHE/D
STEST
MUTEMASK2
220
220
220
87
86
TXIDATA
RDSDATA
88
89
VSS3
VDD3
91
XMUTEC
90
93
92
INPUTSELB
DIMMER
INPUTSELA
95
94
XSYSMUTE
FLASHDO
FLASHCLK
98
36
37
38
SHORT for
TEST POINT
B
C5527
CEHAZA101M10-T
R5566
32
STEST
C
L5501
CN5802
SWFMIX
VE+5
Q5501
(2SC4081(QR)TLB)
J
220
R5629
VE+56
VU+5
F
DLIF3
DLIF2
DLIF1
67
220
R5555
66
220
R5556
65
220
R5557
64
R5558
220
63
R5559
220
62
R5560
220
61
R5561
220
60
R5562
220
59
R5563
220
58
R5564
220
57
R5565
220
C5516
CEHAZA101M10-T
UFL
GNDD 6
GNDD
GNDD 8
XSWDET
VOLDATA 10
G 1/4
LEDAMB
IR
KEY2
VES+5
LED DIM
R5578
R5580
GNDD
220
220
100
100
220
220
220
220
STBY
NC
FLPOW
VS+13
VSS2
VDD2
19
18
SYS
GNDD
GNDLED
LEDBLUE
VE+5
KEY1
DIRDO
DIRERR
FANCONT(PWM)
R5535 XRST_D
220
TO_SYSCOM
XFLRST
XFLCS
FLDATA
FLCLK
C
B
DATA_D_TO_T
UHP
G 1/4,3/4
G 2/4
DSPHREQ
C5514
R5544
31
270k
R5631
22k
R5534
30 HPDET
35 XHPMUTE
UHP
XAVOUTMUTE
220
GNDD
UDS
D
R5533
XRDY_D
DSPSS
XDSPMUTE
XTLO
DECMUTE
38
VSS4
39
40 VDD4
C5512
1000p
XDSPRST
PT_COM
37
LATCH_D
220
220
220
220
220
1k
DIRCS
DIRRST
DSPMODE
µ-COM
KEY2
NC
TEMP
XPROTECT
DSPDI
DSPDO
DSPCLK
FLCS
FLDAT
FLCLK
LACTH
HPDET
E
XSWDET
IC5501
PDC117B-K
(LC875BH4A-K)
MUTEMASK1
26
27
28
R5527
R5528
R5529
R5530
R5531
R5532
DLIF2
FANERR
XRDY
23
DLIF3
BEATCUT2
33
UTEST
34
35 XHPMUTE
36 XRECMUTE
C5502
100k
R5579
G 3/4,4/4
0.01
100p
100p
24
25
0.01
SR+Tx
R5573
R5574
R5575
R5576
R5618
R5619
R5620
R5627
FANCONT1
220
220
220
220
220
C5508
C5509
C5510
220
220
220
220
VOLDATA 97
VOLCLK 96
VOLMUTE
R5583
R5584
R5585
R5586
R5587
R5588
R5589
R5663
R5590
R5591
R5592
R5523
R5524
R5525
R5526
BEATCUT1
DLIF1
32
4
220
220
XRESET
XT1
XT2
VSS1
CF1
CF2
VDD1
SIMUKE
NC
NC
KEY1
TXCLK
DIGSEL
C
B
E
SWPOW
SR+Rx
R5536
R5537
R5538
R5539
R5540
R5521
R5522
0.01
0.01
REMOCON
30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9
X5501
10MHz
X5502
R5511
100
10k
R5516
C5505
C5506
XPDOWNDET
XWMUTE
RDSCLK
8
R5503
220
R5505
220
R5506
220
C5503 22p
VSS1197
R5509
680K
C5504 22p
ASS7034
R5515
10k
R5517
10k
R5513
100K
R5507
220
6 5
5
ATT6dB
ATT10dB
REMSEL
7
B
99
100
1
220
220
3
R5501
R5502
2
1
2
VU+5
R5593
R5594
7
84
83
82
81
6
87
86
92
91
90
95
94
97
96
6
C
VE+76
R5623
3
C5524
CEHAZA101M10-T
2
0.1
DIMMER
C5521
R5582
1
15k
WEN/DI
WD0
WCLK
RST
Vcc
Vss
NC
REMCON
220
220
220
220
220
220
220
220
220
220
220
A
VE+5
VE+56
52045-0745
22
DOWN LOAD TUCOM
CN5507
7
4.7k
G 1/4
3.3k
G 1/4
(TX)
87
80
81
83
19R-1.25FJ
CN5503
TU-COM
VE+37
VX+9
IC6001
BA178M09FP
AGC
SCL
AFT
SDA
TUON
VE+76
2
3
6
7
1/50
R6005
GNDX
JUST
220
LM/
13
LDASH
14
15
UV
VS+13
16
(T)
17
MUTE
18
MIONTA
19
E
CN5504
B
3
4
E
CH
C5651
220p
C
1
FAN+
2
GNDF
7
SU
DCTRI
8
9
10
STBYQ
0.1
XRESET
To DC FAN
MOTOR
13
14
VD+5
86
6
84
16
17
18
RDS
BEATCUT
JA4601
R4601
220
100/16
C4604
C4601
P_CONT
<OUTPUT>
14 PO ON1
SWVION
13 FL ON
OPTICAL
10
10
VA+5
9
VS+6
8
VT+9
7
VD+5
6
GNDD
5
VE+76
4
SWVION
3
VE+33
2
VE+56
1
DGRTN
VD+5 VT+9
VE+76
0
R4612
0.047
3 2 1
VE+33
VE+56
GNDD
(D)
(D)
VES+56
SR+
IC5901 TC7WH08FU
REMOUT
L5905
REMCON
CH : CCSRCH
R5907
E
B
C
L5904
(R5909.0)
RXD
SRIN
R5906 D5904
10k 1SS355
JA5901
XKN3015
7
2
3
5
6
4
1
(R5910.0)
L5902
SR PLUS
SR IN
(R5911.0)
C5904
L5903
(R5912.0)
0.1
10k
Q5901
2SA1037K(QR)
GNDF
TXD
1SS355
R5908
R5902
1.8K
0.1
100
E
RMC
DGRTN
D5901
1SS355
100
R5903 D5903
C5909
1000p
R5901
ALL CAPACITORS ARE IN µ F
UNLESS OTHERWISE SPECIFIED
VET+5
220k
VCC 8
7
6
5
NOTES
B16B-PH-K-S
GNDD
QTL1013
C5901
1
2
3
4 GND
L5901
D
12 BEAT CUT
VS+6
11 VSA+12
JA4602
GP1FA513TZ
L4603
VTL1076
C4609
0.047
C4611
R4611
VA+5
GNDTV
100/16
C4610
R4604
VD+5
D5902
D5905
1SS355 1SS355
VE+37
0
15 GNDTV
0.1
C4602
100k
0.1
R4602
CN5501
16
(D)
0
VSA+12
R980
GNDD
0
GNDTV
VE+37
GNDD
(D)
R4603
19
19R-1.25FJ
GP1FA513RZB
DIGITAL
L4602 OPT IN1
VTL1076
C
GNDD
RDSDATA
RDSCLK
RDSPOW
VD+5
RDS
15
GNDF
VD+5
VT+9
NC(STBYQ)
NC(VS+6)
NC(XRESET)
11
12
C5654
C5657
6
VT+9
VS+6
100/16
1SR154-400-TRB
B
D5653
2.2k
R5651
4.7k
E
B2B-PH-K-S
L5652
1m
C
TR
CN5651
LTA102J-T
E
4.7k
FANPWM
R5655
GNDF GNDF Q5653
(2SC4081(QR)TLB)
R5654
B
22k
R5656
0.1
C5653
10u
C5655
470/16
47k
R5653
Q5623
2SC4081(QR)
5
Q5652
2SB1238X(PQ)-T
PWM
L5651
LCKAW100J2520-T
GNDD
(D)
SD/STID
GNDTV
UV LIN
GNDTV
UV RIN
GNDTV
SU/SAPID
NC(DCTRI)
2
(TV)
TL
STBY
FOMOI
1
CN471
220
VE+5
C
B
FOMO
SD
C
CN152
B
B
I
Q5624
2SA1576
(QR)
R5625 22k
12
RDS
E R6004
GNDD
R5626
10
11
100
D5621 UDZS3.0B
9
P_SAVEBS
C
4.7K
47/16
AL
C6012
0.1
C6010
C6007
Q6001
VE+76
GNDTV
VE+76
GNDTV
VE+37
GNDTV
JUST(P SAVEBS)
NC(LM/)
NC(LDASH)
GNDTV
UVOUT
GNDTV
MUTE
MIONTA
8
VX+9
R6003 B
AFT
SDA
TUON
GNDTV
4
5
JACK
2SC4081
AGC
SCL
1
CN361
4.7k
A
B
R6002
3.3k
R6007
TXIDAT
TXCLK
TXODAT
TXCE
(TX)
VSA+12
R6001
8
ASSY
G 2/4 CONTROL
(AWU8202)
R6008
6
(TX)
VX+9
TXL
GND
8 DO
9
CLK
10 DI
11
CE
G 3/4
7
VSM
TXR
4
5
3
GNDX
FMDET
2
1
52045-1145
CN5505
To FM/AM TUNER UNIT
TXR
6
TXL
5
GNDD
GNDS
(OTHER : CKSRYB)
AL : CEAL
(OTHER : CEAT)
ALL RESISTORS ARE IN Ω
RS1/16S∗∗∗J
RS1/10S∗∗∗J
(1/10)
ALL INDUCTORS ARE IN µ H
(T)
(D)
: Audio Signal Route (FM/AM)
(TX)
(TV)
LFEA∗∗∗J
F
G 2/4
47
XV-DVR9H
5
6
7
8
1
2
3
4
ASSY
G 3/4 CONTROL
(AWU8202)
TXR
INPUTSELB
R20021k
INPUTSELA
R2001 1k
(AL)
(AL)
C2001
10/50
AL
100k
TXR
(TX)
R2005
R2023
C
TXL
100k
B
TXL
AUDIO INPUT SELECT
R2006
G
2/4
E Q2005
UN5112
47k
MUTE_OUT
AR
VDD 16
X2 15
14
X1
13
X(Lch)
12
X0
11
X3
A 10
9
B
D2003
DAP202K
92 91
(AI)
AL
BU4052BCF
VE+5
JACK
36
XRECMUTE
RM
AOUTMUTE
G 2/4,4/4
UDS
A
VE+5
1
2
3
4
5
6
7
8
Y0
Y2
Y(Rch)
Y3
Y1
INH
VEE
VSS
IC2001
VA-6
B
D2005
B
C2002
JACK
E Q2007
UN5112
10/50
AL
G 1/4
C
UDS
32
XAOUTMUTE DAP202K
MUTE_OUT
GNDA(IN)
C
2
1
KN2501
VNE19484 3
GNDA(IN)
GNDS
D
G 1/4,2/4
VSA+12
32dB
XHPMUTE
R3920
C3904
1/10 100
R3910
1/10 100
100/16
NP
1/10 100
R3922
1/10 100
GNDS
F
– 2
4
+ 3
IC3902 (2/2)
NJM4560M
1k
C3911
R3933 47p
39k
47/16
39k
C3916
10/50
VSA-12
CH : CCSRCH
(OTHER : CKSRYB)
AL : CEAL
G 3/4
8
1
R3912
1/10 100
NOTES
C3913 R3931
22
R3925
2.2k
R3908
CH
39k
47/16
35
E
Q3902
2SD2114K(VW)
R3918
1/10 100
C3910 100p
R3930
C3912 1k
R3934
47p
B
KN5502
VNF1084
CH
(HP)
10/50
C3915
C3909 100p
C3914
2.2k
R3914
E
39k
R3932
C
– 6
(HP)
CH
C
8
R3929
22
R3906
1/10 100
B 2.2k
Q3903
2SD2114K(VW)
Q3904
2SD2114K(VW)
B R3916
+ 5
47/16
C
R3923
E
0
R3904
1/10 100
2.2k
R3915
100k
C3905
B
R3921
1/10 100
4
7
100/16 NP
1/10 100
R3913
47/16
HR
(HP)
C3903
R3927
GNDHP
R3919
100k
C3906
GNDA
R3902
1/10 100
E
R3996
L3901 C
(HP)
R3924
0
R3911 1/10 100
C3925
0.1
R3952
1000p
R3905
1/10 100
C3901
1/10 100
R3917
1/10 100
R3909 1/10 100
Q3901
2SD2114K(VW)
1000p
R3903
C3902
(HP)
HL
IC3902 (1/2)
NJM4560M
1/10 100
R3907
R3901
1/10 100
E
HP AMP
UHP
CH
UHP
RS1/16S∗∗∗J
RS1/10S∗∗∗J
1/10
NP : CEANP
(OTHER : CEAT)
48
XV-DVR9H
1
2
3
4
5
6
7
8
A
G 1/4,2/4
UIF
VSA+12 VA+6
1k
R2011
C
B
C2010
R2017
C
ATT6dB
1
ATT10dB
2
Q2010
DTA124EUA
B
100k
R2022
E
C
Q2009
DTA124EUA
100k
ARIN
10/50
AL
B
R2021
1k
R2010
1.5k
22
4
G 4/4
E
10k B
C
C
E
R2020
R2018
R2012
R2008
5 +
10k
E
10k B
7
R2019 B
E
R2016
8
C
680
Q2004
Q2003
2SC4081(QR) 2SC4081(QR)
10k
ALIN
10/50
AL
680
R2015 B
1.5k
Q2002
Q2001
2SC4081(QR) 2SC4081(QR)
UDZS6.2B UDZS6.2B
AL
D2001
AL
D2002
0.01
C2007
47/16
0.01
C2005
0.01
C2006
0.01
C2008
47/16
C2003
C2004
NJM4558MD
IC2002 (2/2)
6 –
1.5k
(AL)
(AL)
C2009
R2013
1
1.5k
8
R2014
2 –
10dB ATT
E
4
R2009
3 +
22
(AL)
R2007
6dB ATT
IC2002 (1/2)
NJM4558MD
VSA-12 VA-6
C
R2517
R2518
R2519
1k
1k
1k
96
97
DSPMUTE
G 4/4
D
VSA+12
HP VOL
6.8k
1k
D3903
1SS355
R3951 R3950
B
47k
R3949
GNDHP
15k
E
C
6.8k
R3944
R3948
R3940
IC3901
BD3812F
Q3907
2SA1576A(QR)
1k
OUT1
OUT2
SEL
HPR
VE+56
E
C3924 1k
10/16
AL
(HP)
HPL
3.3k
3.3k
VSA-12
G 4/4
(HP)
R3943
8
9
10
11
12
13
14
CL
DA
MUTE
DGND
VCC
AGND3
VEE
AGND2
IN2
AGND1
IN1
7
6
5
4
3
2
1
C3918
10/50
47/16
VA-7
-4.5dB
1k
C3932
C3917
10/50
C3931 47/16
(HP)
D3901
D3902
UDZS6.8B UDZS6.8B
R3941
R3942
R3939
VA+7
GNDD
(AL)
(TX)
(AI)
(HP)
: Audio Signal Route (AUDIO L ch)
: Audio Signal Route (FM/AM)
F
G 3/4
49
XV-DVR9H
5
6
7
8
1
2
3
4
ASSY
G 4/4 CONTROL
(AWU8202)
330p CH
C8303
820p CH
CH
330p
C8304
820p CH
R8306
R8308
C8301
(FR)
–
7
RC
C8658
10/50
5
R8302
12k
(LO)
IC8652
BA4558F
22
4
R8660
+
5
27k
2.2k
22
10/50
IC8301 (2/2)
BA4558F
4
+0.0dB
6
R8317
IC8301(1/2)
BA4558F
4
(FL)
C8313
1
+0.0dB
3
C8302
8
2.2k
0.01
27k
CH
8
0.01
R8657 0.01
100k
12k
2
FR_DSP
R8658 0.01
100k
C8660
0
C8652
10/50
SBR
C8659
R8651 100k
R8656
6
B
(FL)
R8305 R8307
R8301
1/50
C8311
(FL)
FL_DSP
C8307
68p
C8309
22
39k
(LO)
0
R8652 100k
GNDA
R8309
LC
R8655
VSA+12
LPF & GAIN
(LO)
8
G 1/4
C8657
10/50
1
–
2
4
+
3
+
IC8652
BA4558F
–
(LO)
+
C8651
10/50
R8659
JACK
1/50
C8312
(LO)
VSA+12
C8310
(LO)
A
–
SBL
GNDA
C8314
7
(FR)
10/50
8
C8308
L,R fc=48kHz
CH
68p
R8310
VSA-12
39k
C8337
CH
820p R8341
5.6k
2
C8335
C8339
0.01
0.01
C8334
1500p
(C)
SW_DSP
17
(C)
C8905
(LO)
19
(SW)
C_DSP
5
VCH1241-
61
DIRERR
57
DIRRST
66
DIRCS
67
DIRDO
58
DSPMODE
65
9
DSPHREC
59
11
DSPSS
63
XDSPRST
64
DSPCK
25
4
5
6
7
8
13
DSPDO
14
15k
16
60
XDSPMUTE
62
Q8321
UN5112
C R8322
1
2
B
1SS355
100
MUTE_OUT
19
XKP3069-
CN8903
48
52
(OTHER : CKSRYB)
CH : CCSRCH
AL : CEAL
(OTHER : CEAT)
NO MARK DIODE
1SS355
GNDD
ASW
17
18
VSA-12
E
D8301
23
DECMUTE
(SW)
10/50
NOTES
24
DSPDI
15
(SW)
VD+5
10
12
7
8
C8352
3300p
GNDA
C8362
R8358
DSPMUTE
47k
XTLO
R8321
H 2/2 CN8011
GNDA(IN)
GNDD
6
G 2/4,3/4
(LO)
1
3
IC8303 (2/2)
BA4558F
+8.0dB
SW
2
4
–
18
C8360
(LO)
(SW)
15
16
100k
SL_DSP
R8367
IC8303 (1/2)
BA4558F
R8368
10/50
13
14
(C)
C8361
4
100k
3
C8355
2.7k
1
+9.5dB
R8357
0.01
(C)
C8906
VCH1241-
(SL)
1.5k
5.6k
8
C8359
VCH1241-
11
1.0k
R8355
CH
R8361
C8353
1500p
(SW)
10
12
0MUTE
SR_DSP
R8351
5.6k
(SL)
VCH1241C8903
(C)
R8363
9
C_DSP
SW_DSP
10k
VCH1241C8904
8
FL_DSP
R8356
(FL)
1500p
C8901
47k
C8351
7
(FL)
R8353
0
47k
6
FR_DSP
R8352
R8903
5.6k
2
(SW)
5
C8902
VCH1241-
C8340
C8333
1500p
R8343
5.6k
1500p
47k
C8331
R8359 820p
GNDVCOM
+
H 1/2 CN8007
CH 820p
C8357
0
ALIN
3
GNDD
LSSN
XTLO
DIRERR
DIRRST
DIRCS
DIRDO
DSPMODE
DSPHREQ
BUSY
DSPSS
DSPRST
DSPCK
DSPDO
DSPDI
DECMUTE
MODC
MUTE
MUTE_OUT
F
R8342
R8904
4
(SR)
7
8
5.6k C8338 5.6k
C fc=48kHz
ARIN
2
IC8302 (2/2)
BA4558F
4
+9.5dB
R8340
XKP3069-
E
5
+
GNDA
LIN
GNDA
FR
VCOMG
FL
RECMUTE
SR
GNDA
SL
GNDA
SW
GNDA
C
GNDA
SBRO
GNDA
SBLO
D
2.7k
22
(AL)
1
R8338
1.5k
LS,RS fc=48kHz
CN8902
RIN
R8336
1.0k
6
G 3/4
ALIN
13
R8332
0.01
11
12
(LO)
GNDD
10
(SR)
GNDS
GNDD
ARIN
R8318
DGRTN
VA+5
9
BA4558F
C8336
0.01
KN5501
VNF1084
R8344
5.6k
5
6
8
4 IC8302 (1/2)
DIN
C961
7
2.7k
1500p
(D)
1.5k
47k
C8332
SPDIF
3
4
1.0k
1
+9.5dB
3
DOUT
(D)
R8334
2
R8337
–
H 1/2 CN8003
(D)
R8905 0
R8335
–
OPTIN
DGRTN
OPTIN
GNDD
GNDD
VD+5
VD+5
GNDA
GNDA
VA+5
GNDD
1
R8331
+
G 1/4
CN8901
OPTOUT
UGRTN
R8333
VD+5
XKP3066-
C
(SL)
(SL)
8
+
SL_DSP
SR_DSP
(SL)
5.6k
–
R8339
(F)
DTSMIX
SWFMIX
UDS
UDS
GNDD
G 2/4,3/4
G 4/4
50
XV-DVR9H
1
2
3
4
5
6
7
VSA+12
C8509
0.01
C8511
0.01
R8531
22
22
(FL)
(FL)
R8507
47
R8503
R8501
10k(F)
100k
R8424
R8505
(HP)
0.01
22
5.6k
1.5k
R8415
6.8k
R8419 R8417
(FL)
1
C8505
(HP)
IC8401
(1/2)
BA4558F
C8408
14
13
12
11
10
9
8
8
6
5
0.01
10k(F)
8
4
7
R8509
47
IC8501
BA4558F
C8507
(FL)
0.01
7
100k
5
4
R8422
7
R8510
47
IC8502
BA4558F
C8508
10k
GNDVCOM
B
0.01
6
–
R8511
10k(F)
0.01
10k(F)
8
R8519
47
7
+
5
IC8503
BA4558F
4
(FL)
C8517
(SL)
C
CN8904
AKP7131-
C8519
0.01
(SW)
R8518
47
4
1
IC8504
BA4558F
C8518
(SW)
0.01
8
C8522
2
10/50
–
C8342
3
+
R8348
100k
GNDA
10k(F)
8
R8520
47
7
+
5
IC8504
BA4558F
4
GNDA
6
–
5
4
IC8505
BA4558F
+
(SW)
SLN
11
CN
12
SLP
D
8
E
IC8506
BA4558F
C8530
R8911
0.01
(SW)
(SW)
1
C8534
47k
R8428
VA-6
2
R8528
47
4
GNDD
R8522
10k(F)
6
8
0.01
10k(F)
R8530
47
7
GNDD
VA-6
+
R8532
22
5
4
R8923
0
GNDA
R8526
IC8506
BA4558F
C8532
0.01
UN5212
SRP
10
C8531
C8536
E
SRN
9
(C)
E
(HP)
47k
R8427
B
B
–
C
3
–
Q8407
B UN5212
+
E
Q8405
CP
8
0.01
Q8406 UN5112
C
FRN
7
GNDS
R8529
47
VA+6
C
C8529
0.01
10k(F)
SWF MIX
B
SWP
6
0.01
IC8505
BA4558F
8
VA+6
C
FRP
5
(C)
0.01
8
7
E
FLP
4
1
C8533
(C)
2
–
R8521
10k(F)
UN5112
Q8404
(C)
FLN
3
(SL)
R8527
47
4
R8525
DTS MIX
(SL)
C8535
(C)
3
(SW)
C8520
SWN
2
0.01
(C)
+
(C)
0.01
6
0.01
C8524
1k
R8426
1k
R8512
10k(F)
–
R8425
(C)
R8516
1
TO Sub Woofer
R8515
(FL)
IC8503
BA4558F
8
0.01
2
(SL)
1
0.01
(SL)
VA-6
R8517
47
4
C8521
3
10/50
C8523
(SL)
–
(SL)
C8341
+
1
2
3
R8420 4
1.5k 5
6
7
C8402
0.01
0.01
10k(F)
8
0.01
6
C8506
0.01
-
8
6
R8412
10k
R8347
100k
IC8502
BA4558F
8
R8506
R8502
10k(F)
R8504
4
+
220
+
6.8k
5
–
R8414
GNDA
1
IC8401 (2/2)
BA4558F
R8418
5.6k
R8416
2
R8508
47
4
C8510
3
10/50
C8512
C8538
–
BU4066BCF
1
2
4
VSA-12
IC8402
3
10/50
+
C8403
0.01
3
R8421
10k
8
A
4
+
220
2
+
LFE MIX
+3.0dB
IC8501
BA4558F
(FL)
C8537
R8413
(FL)
R8423
(FL)
C8539
STBY
–
C8407
0.01
–
R8411
10k
–
+7.6/±0.0
SELECT
+
VA+6
(SL)
8
GNDS
(SW)
PHASE REVERSE
0.01
VSA-12
(AL)
G 3/4
HPR
HPL
(HP)
(HP)
(D)
(FL)
: Audio Signal Route (AUDIO L ch)
(SL)
(C)
(SW)
: Audio Signal Route (FL ch)
(LO)
: Audio Signal Route (SL ch)
: Audio Signal Route (C ch)
: Audio Signal Route (SW ch)
F
G 4/4
51
XV-DVR9H
5
6
7
8
1
2
3
4
3.16 DSP ASSY (1/2)
H 1/2 DSP ASSY
(AWX8486)
A
KN8101
VNE1948
V31
V3D
GCH
100/4
X8201
XSS3003
24.576MHz
CH 10p
0
C8210
CH 10p
R8216
GNDD
100
100 LRCK
R8215
100
25
SDTO
R8214
0.1
R8207
0
C8209
DVSS
MCKO1
DVDD
VOUT
UOUT
R8213 47
V3D
YB
C8217
C8202
0.1
YB
C8207
C8204
CH
AVDD
R
RX0
AVSS
VCOM
AVSS
RX1
AVSS
COUT
BOUT
TX1
R8212
V53
(D)
V5D1
R8206
100
R8225
DAUX 28
MCKO2 27 47
R8209
BICK 26
13 14 15 16 17 18 19 20 21 22 23 24
R8223
0
(D)
TVDD
C
R8205
100
XTI 30
XTO 29
100
R8220
0
GNDD
R8203
100
R8204
CDTO 32
PDN 31 0
DIR&DIT
DVSS
0
INT0 36
CSN 35
CCLK 34
CDTI 33
IC8201
AK4114VQ
TX0
R8233
1
2 RX4
AVSS
3 RX5
4 AVSS
5 RX6
6 AVSS
7 RX7
8 IIC
9 P/SN
10 XTL0
11 XTL1
12 VIN
RX2
AVSS
48 47 46 45 44 43 42 41 40 39 38 37
YB
1000p
0
R8202
10k
R8229
INT1
RX3
F%
B
C8201
470p
C8203
0.47 YB
R8201
18k
L8201
QTL1013
(D)
V32
L8204
R8219
L8203
0.1
YB
CH470p
C8215
C8214
YB 0.1
C8225
CH470p
C8213
C8212
100/4
QTL1013
QTL1013
(D)
D
(D)
R8339
0
0
R8328
MCLK
(D)
R8338
0
0
R8334
LCKI
PWR
100k
R8320
IEDO
100k
IEIT
IE
HA1/2
R8321
100k
52
GNDD
XV-DVR9H
1
R8340
0
R8322
F
ERR
LOCK
E
2
3
4
6
7
ROUT1
LOUT1
SDTI3
ROUT2
8ch CODEC
CAD0
LOUT4
ROUT4
LOUT2
CAD1
DFS
TST
DAUX
L8401
QTL1013
100/16
R8408
R8409
R8410
0
L8402
QTL1013
LOUT3
100
R8413
100
V55
(DVD)
R8416
100
4.7
5
100
100 C8411
470p
100
C8412
100 470p
100
C8413
470p
6
(FL)
CH
7
8
CH
9
10
(SL)
CH
11
(SW)
12
CH
13
C8414
470p
14
(C)
CH
15
C8416
470p
16
CH
17
CH
19
C8417
470p
18
B
R8017
0
YB
0
XKP3080
4
CH
C8410
470p
0.1
C8422
0.1
R8417
C8409
470p
(DVD)
100p
C8421
CH
100/16
C8420
YB
470p
C8415
0.01
C8419
CH
YB
C8418
R8415
DRRT
CN8007
DAN202K
R8411
R8414
R8412
ROUT3
SDTI4
V34
D8401
R8407
22
21
20
19
18
17
16
15
14
13
12
LOCK
DRCS
CLK
DATA
DRDO
DRRT
RIN
GNDA(DAG)
LIN
GNDA(DAG)
FRO
VCOMG
FLO
RECMUTE
SRO
GNDA(DAG)
SLO
GNDA(DAG)
SWO
GNDA(DAG)
CO
GNDA(DAG)
SBRO
GNDA(DAG)
SBLO
2
3
G 4/4 CN8902
NC(TST)
SDTI2
SDTO
GVCM
1
DAP202K
VCOM
VREFH
AVSS
AVDD
DZF1
P/S
CSN
CCLK
MCLK
TDM
CDTI
SDTI1
PDN
V3D
LRCK
DVSS
100
IC8401
AK4628VQE
DVDD
R8406
(AD)
BDTO
BICK
TVDD
(AD)
(AD)
(AD)
RIN
LIN
NC
SMUTE
DZFE
MD
47
R8405
I2C
3
2 1
DZF2/OVF
33 32 31 30 29 28 27 26 25 24 23
BCKO
LCKO
FDTO
SDTO
CDTO
1 2 3 4 5 6 7 8 9 10 11
MC
34
35
36
37
38
39
40
41
42
43
44
SDOS
D8402
100
C8408
100/4
100
R8403
470p
C8405
C8407
YB 0.1
R8402
DATA
R8404
CLK
GDAC
47
100
YB
C8404
CH
H 2/2
R8401
8
A
2 1
H 2/2
MCLK
DRCS
0.01
C8406
V5A
V54
3
5
C
V3D
V5D1
YB
NJM2391DL1-33
IN
OUT
1
3
2
100/16
0
GDAC
0.1
R8010
C8901
V5D1
C8902
IC8901
V5A
IC8902
NJU7223DL1-18
0
C8903
IN
2
YB
(D)
OUT
1
3
(D)
C8904
100/16
R8019
V1R8
0
0.1
R8011
R8014
0
GNDD
R8013
0
V5D1
0
L8004
ATL7002
R8005
L8002
XTL0
ATL7002
GNDD
D
GNDD
1
(D)
CN8003
XKP3077
2
3
4
5
6
7
8
10
9
11
13
12
BCKI
(D)
GCH
GNDD (1394)
V+5A
GNDA (DAG)
GNDA (DAG)
V+5D
V+5D
GNDD
GNDD
OPTIN or DGRTN
DGRTN
OPTIN or uGRTN
uGRTN
OPTOUT or uGRTN
C8007
FDTI
CH 470p
C8008
E
CH 470p
C8009
YB 0.01
C8010
G 4/4 CN8901
YB 0.1
: AUDIO SIGNAL ROUTE (L ch)
(DVD)
NOTES:
NO INDICATED
PARTS
IS...
CCSRCH****50-T
CKSRYB****50-T
CKSRYB333K16-T
CKSRYB104K16-T
CKSRYB105K6R3-T
(D)
(AD)
(FL)
CEV***M**-T
(SL)
RS1/16S***J-T
(C)
UNLESS OTHERWISE NOTED
(SW)
: AUDIO SIGNAL ROUTE (DVD Lch)
GNDD
(DSP)
GDAC
: AUDIO SIGNAL ROUTE (DIGITAL)
: AUDIO DATA SIGNAL ROUTE
: AUDIO SIGNAL ROUTE (Front L ch)
F
: AUDIO SIGNAL ROUTE (Surround L ch)
: AUDIO SIGNAL ROUTE (Center ch)
H 1/2
: AUDIO SIGNAL ROUTE (Sub Woofer ch)
53
XV-DVR9H
5
6
7
8
2
CN8011
G 4/4 CN8903
3
3
C8512
470p
CH
C8513
MC
0.1
YB
GNDD
XKP3080
Q8503
UN5112
B
V3D
D8501
1SS355
4
2
1
E
2 1
C
2 1
3
5
6
HA2/2
XV-DVR9H
4
Q8504
(2/2)
UMD2N
Q8504
(1/2)
UMD2N
100
BCKO
LCKI
RESET
VCCH
GNDH
PB3 1394
PB2
PB1 LSSN
PB0 ADMD
TIO0
PB13
PB10
PB9
PB8
PB7
PB6
PB5
100
TC74VHCT244AFT
Level shifter
R8521
BCKI
CH
CH
470p
CH
MOSI
TMS
TCK
TDI
TDO
MISO
SDI1_1
MODA
HREQ
SDO0
SDO1
SDO2
SDO3
VCCS
GNDS
SDI1
SDI0
FST
FSR
SCKT
SCKR
HCKT
HCKR
VCCQL
GNDQ
VCCQH
PB12 MUTE
PB11
PB15
PB14
VCCS
GNDS
ADO
R8522
IC8702
470p
CH
47k
0
R8555
R8532
R8504
100
10k
10k
10k
H 1/2
MD
DATA
CLK
DSSS
DSRT
IECK
IEDI
V3D
R8520
LCKO
0.1
C8505
YB
C8504
R8510
R8506
100
RAB4C101J
20
19
18
17
16
15
14
13
12
11
R8534
10k
1000p
YB
0
C2
1394
C8555
MCLK
SCK
1
SS 2
R8505
3
10k
4
5
6
7
8
9
10
R8557 47
11
R8511
12
47
13
R8512
14
47 R8513 15
47
R8514 16
47
17
18
19
20
21
22
R8515
47k 23
R8516
4.7k 24
25
26
27
28
10k
R8517
29
4.7k 30
R8518
31
32
R8519
33
34
47k
35
36
BUSY
B2
0
R8543
37 38 39 40 41 42 43 44
PB4
R8542
E2
FDTI
R8549 D8503
DAP202K
ON
MUTE
L
C8509 C8507
470p 470p
HI-Z
C8511
GNDD
FDTO
SDTO
CDTO
BDTO
1M
Y
H
USE
R8509
USE
10k
C
NO USE
R8508
USE
R8548
47k
G
R8542
R8543
1M R8547
R8558
NO
C8552
C8553
R8507
10k
VCC
2G
1Y1
2A4
1Y2
2A3
1Y3
2A2
1Y4
2A1
IC8503
L8505
R8544
R8545
R8546
D8502
DAP202K
XTL0
R8808 100k LSSN
DRCS
DRRT
IEDO
IEIT
MODC
1G
1A1
2Y4
1A2
2Y3
1A3
2Y2
1A4
2Y1
GND
OTHERS
1
3
R8807 100k
DSMD
330
330
R8708
1
2
3
4
5
6
7
8
9
10
96DTS
MODEL
2
4
5
R8806 100k
R8805 100k
CLK
R8803
100k DSRT
DSSS
R8804 100k
DATA
ERR
DSMD
IECK
IEDI
3
E
54
6
100k
MUTE
MODC
R8802 100k
R8801
R8810
330
R8706
330
R8707
R8705
IC8701
Level shifter
TC74LVX244FT
7
9
11
13
100k
20
19
18
17
16
15
14
13
12
11
3V
8
10
12
14
15
17
19
IE
3V
330
5V
DSRQ
VCC
2G
1Y1
2A4
1Y2
2A3
1Y3
2A2
1Y4
2A1
L8701
QTL1013
V38
C
1
2
B
F
1M R8538
GNDD
1G
1A1
2Y4
1A2
2Y3
1A3
2Y2
1A4
2Y1
GND
V56
330
R8704
1
2
3
4
5
6
7
8
9
10
5V
DRDO
GNDD
R8703
B
DSDO
10/16
0.1
C8703
CH 470p
C8702
YB
C8701
V3D
16
18
H 1/2
IECK
IERT
IEDI
L8702
QTL1013
V5D1
MUTE OUT
MUTE
MODC
DEC MUTE
DSP DI
DSP DO
DSP CK
DSP RST
DSP SS
BUSY
DSP HREQ
DSP MODE
DIR DO
DIR CS
DIR RST
DIR ERR
XTL0
LSSN
GNDD
E
R8811 100k
R8812 100k
R8813 100k
D
10/16
C8705
YB
0.1
C8706
CH
470p
C8704
1
4
3.17 DSP ASSY (2/2)
JTAG
TP5 TP4 TP3 TP2TP1
A
DSDO
DSRQ
R8501 100
R8502
R8503 100
100
4.7k
144143142141140139138137
ACI
96DTS
LSSN
R8526
R8809 0
100
GNDD
3
2
1
GNDD
5
6
7
V1R8
V3D
0
R8533
R8531
0
150/4
C8613
MR
150/4
C8547
L8502
A
ATL7002
150/4
C8546
L8501
(AWX8486)
V36
ATL7002
V11
H 2/2 DSP ASSY
8
C8544
C8542
C8540
C8538
0.1
YB
C8545
0.1
YB
C8543
0.1
YB
C8541
0.1
YB
C8539
GNDD
B
CH
C8536
470p
C8537
0.1
YB
CH
C8534
470p
C8535
0.1
YB
0.1
YB
0.1
YB
0.1
YB
0.1
YB
470p
C8533
470p
C8531
470p
C8529
470p
C8527
CH
C8532
CH
C8530
CH
C8528
WR
RD
AA1
AA0
BG
A0
GNDC
D
47k
47k
R8530
47k
R8529
0.1
YB
WR
RD
0.1
YB
470p
CH
C8525
E
C8554
BASIC MODEL
AAC&96DTS
MCACC
AAC&96DTS
&MCACC
YB 0.1
C8551
2
IC8602
C8605
C8606
C8607
C8608
L8602
IC8603
C8609
C8610
L8603
R8523
NO USE
USE
USE
NO USE
USE
USE
NO USE
USE
NO USE
NO USE
NO USE
USE
USE
USE
USE
USE
C8549
CH470p
CH 8p
470
1
IC8601
C8601
C8602
C8603
C8604
L8601
YB 0.01
C8550
1M
CH 8p
R8540
C8548
X8501
VSS1171
20MHz
L8504
V37
IC8502 (2/3)
IC8502 (1/3)
TC7WU04FU TC7WU04FU
R8539
8
8
2
6
5
3
4
4
100
R8541
QTL1013
R8524 47
YB 0.01
C
RD
AA1
AA0
0.1
YB
1
YB
D6
C8524
R8528
470p 470p
CH
CH
C8521 C8523
PINIT
TA
BR
BB
VCCC
GNDQ
EXTAL
VCCQL
VCCC
GNDC
FSR_1
SCKR_1
C8520 C8522
470p
CH
0
C8518
C8517
C8514
0.033
470p
CH
C8516
R8552
YB
C8515
CAS
SCKT_1
FST_1
AA2
VCCP
PCAP
GNDP
SDI0_1
VCCQH
108
D5 107
D4 106
105
D3
BOOT MODE
A B C D
104
GNDD
DECORDER
0 1 0 0
103
VCCD
P2ROM
1 0 0 0
102
D2
UCOM
1 0 1 0
101
D1
100
D0
A17 99
98
A16
97
A15
96
GNDA
95
IC8501
VCCQH
94
A14
DSPD56367PV150 (AX6)
93
A13
92
A12
VCCQL 91
90
DSP
GNDQ
89
A11
88
A10
87
GNDA
86
VCCA
85
A9
84
A8
83
A7
82
A6
81
GNDA
80
VCCA
79
A5
A4 78
A3 77
A2 76
75
GNDA
74
VCCA
73
A1
45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72
CH
C8526
D7
D17
D16
D15
GNDD
VCCD
D14
D13
D12
D11
D10
D9
GNDD
VCCD
D8
VCCQL
D19
D18
MODB
MODC
MODD
D23
D22
D21
GNDD
VCCD
D20
GNDQ
470p
470p
470p
470p
CH
CH
CH
CH
136135134133132131130129128127126125124123122121120119118117116115114113112111110109
7
8
4
1
IC8502 (3/3)
TC7WU04FU
GNDD
BASIC
MODEL
DVD-A
MCACC
1394
R8534
10K
R8531
0Ω
10K
0Ω
R8533
0Ω
R8550
R8551
Q8501
F
0Ω
UN5212
H 2/2
55
XV-DVR9H
5
6
7
8
1
2
3
4
3.18 REG, DISPLAY, LED, TRADE, F. JACK, IR, KEY L and KEY R ASSYS
I
CN151
52045-2145
3
4
5
6
7
W217
8
STBY
9
10
11
12
13
14
IC151
NJM78M56FA
OUT
3
PQ1K333M2ZP-TRB
IC153
C171
10/50
-TS
C170
1/50
-TS
0.1
C176
100/16
-TS
C173
220
R161 220
0.1
C177
100/16
-TS
C174
100/16
-TS
R156
0.1
C175
C172
0.1
C166
100/16 -TS
C164
0.1
R153 220
-TS
0.1
C167
STBY
Q153(2/2)
C165
R155
C188
1k
C163
47k
Q153(1/2)
UMF21N-TLB
R160 220
Q155
2SC2411K(QR) 152mA
100/16
C
IC152 BA05FP
IN
OUT
1
3
2
R154
R151
R152
4.7k
C187
220/16
Q151
VEF1040-
329mA
-TS
Q152
2SB1237X(QR)
W211
145mA
Q156
2SC2411K(QR)
C158
KN101
VNF1084
IC154
BA178M09FP 36mA
IN
OUT
1
3
2
-TS
C162
C159
0.1
W250
10/50
2
1
C157
VFDP
FLDC+
1/50 -TS
3
UN5212
4
FLDC-
47K
GNDFL
10 µ A
OUT 6
GND 5
CT 4
C160
21
0.1
1 IN
2 GND
3 ON/OFF
47/50
2
0.1
C161
W214
C154
19
20
W203
1/50
-TS
18
IN
1
W202
C153
17
243mA
10/50
-TS
15
16
B4B-PH-K-S
O
REG ASSY (AWU8225)
2
CN154
CN5105
B
1
D151
1SR154-400
Q
CN202
VE+37
GNDTV
PO ON 1
FL ON
BEAT CUT
GNDAV
VSA-12
GNDA
VSA+12
GNDREG
VS+13
XSTBY
VE+76
GNDD
VE+6
VS+6
FLDC+
VFDP
FLDCGNDFL
GNDFL
W201
A
GNDD
C5861
0.01
D5861
SLR-343BBT
22/35
AL-TS
C5821
0.022
C5804
0.022
C5803
100/6.3
VS+13
LED
BLUE
LED
AMB
2G
R5851
Q5851
2SC4081(QR)
B
C
100
D5851
3.9B
R5854
1k
E
C
Q5854
2SC4081(QR)
12G
11G
10G
9G
8G
7G
6G
5G
4G
3G
B
R5863
47K
47k
R5807
1k
R5805
R5856
VFDP
C5811
47P CH
3.3k
GNDD
SG23
SG22
SG24
SG25
SG26
SG27
SG28
SG29
SG30
SG31
SG32
SG33
SG34
SG35
GR1
52045-0345
56
0.022
C5820
C5805
220p
C5806
220p
C5807
220p
C5808
1000p
C5809
P21
P22
P23
P24
P25
P26
P27
P28
P29
P30
P31
P32
P33
P34
P35
SG21
FL DRIVER
48
GR1647
46
GR15
GR1445
GR1344
GR1243
GR1142
GR1041
GR9 40
GR8 39
GR7 38
GR6 37
GR5 36
GR4 35
GR3 34
33
GR2
31 32
CN5851
3
VS+13
R5862
10K
E
C5822
1/50
AL-TS
GNDLED
DISPLAY ASSY
(AWU8216)
J
C5823
1/50
AL-TS
1G
5
VS+13 6
7
KEY1
VE+5 8
9
LED BLUE
GNDLED 10
11
GNDD
FLCLK 12
13
FLDATA
XFLCS 14
15
XFLRST
VKN1275
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
P17
P18
P19
P20
P21
P22
P23
P24
P25
P26
P27
P28
P29
P30
P31
P32
P33
P34
P35
P36
P37
1G
2G
3G
4G
5G
6G
7G
8G
9G
10G
11G
12G
GNDLED
51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
V5801
AAV7103
FL
F
9
8
7
6
5
4
3
1
1G
2G
3G
4G
5G
6G
7G
8G
9G
10G
11G
12G
NP
F-
53
F+
NP
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
P17
P18
P19
P20
P21
P22
P23
P24
P25
P26
P27
P28
P29
P30
P31
P32
P33
P34
P35
P36
P37
G 2/4 CN5502
50 49
1
E
0.022
SG4
SG3
SG2
SG1
AD1
AD2
P2
P1
VDD
DIN
CLKB
CSB
RSTB
OSCO
OSCI
VSS
4
CN5861
220
R5859
SG5 64 63 62 61 60 59 58 57 56 55 54 53 52 51
P5 1
P6 2 SG6
P7 3 SG7
P8 4 SG8
P9 5 SG9
P10 6 SG10
IC5801
P11 7 SG11
PT6302LQ-003
P12 8 SG12
P13 9 SG13
P14 10 SG14
P15 11 SG15
P16 12 SG16
P17 13 SG17
P18 14 SG18
P19 15 SG19
P20 16
SG20
17 18 19 20 21 22 23 24 25 26 27 28 29 30
3
3
2
Q5801
2SC4081(QR)
C
B
VDD
FLDATA
FLCK
XFLCS
RST
R5808
1
2
LED ASSY
(AWU8223)
2
GNDFL
P4
P3
P2
P1
P37
P36
CN5802
1
K
1
C5810
VS+13
2
52045-0345
220
220
220
220
VE+5
DIMMER
VES+5
KEY2
IR
LED AMB
VFDP
VEE
D
E
LFEA
L5802
10
0.22
R5801
R5802
R5803
R5804
C5802
LFEA
L5801
22
0.022
C5801
UMF21N-TLB
FL HOLDER
VNF1122-
I J K
56
XV-DVR9H
1
2
3
4
6
2
VSA-12
4
SDA
4
CSTBY
5
SCL
5
6
SWSTBY
6
7
SYNC
7
8
SYNCAFT
8
9
TEXTV
9
10
SDET2
10
11
AOUTMUTE
11
G 1/4 CN804
UN5212
NOTES
CH : CCSQCH or CCSRCH
YF : CKSQYF or CKSRYF
(OTHER : CKSQYB or CKSRYB)
CEAT∗∗∗M##
1SS355
1/10W or 1/16W
1/4PU
12
SDET1/SAMUTE 12
13
SDET3/P_CONT 13
14
S1
14
15
X525P
15
16
AVLIN
17
AVLOUT
17
18
XPSAVE
18
19
FUNC
19
20
XTHROU
20
21
BLANKIN
21
EXTRGB
22
23
XCSTBY
23
VE+5
9
8
7
6
5
4
3
2
1
7
5
3
VKN1238-
DV
JA5001
VKB1207
4
TPA
3
XTPA
2
TPB
1 XTPB
VKN1269
5/5 CN5102
C
0.022
C5301
C5302
0.022
0
0
0
R5208
R5207
R5206
R5201
75F
0.01
YB
R
R5205
100
2
3
2
1
IR
Vcc
Vout
GND
1
N
IR ASSY
(AWU8227)
I
X5151
SPS-442-E1
GNDD
CN154
R5107
R5108
R5109
R5110
1k
1.2k
1.5k
1.8k
POWER
VOL-
VOL+
2.7k
PLAY
PLAY STOP
GNDD
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
GNDFL
2
FLDC-
3
VFDP
4
FLDC+
B4B-PH-K-S
S5107-S5111: VSG1024
L ASSY
O KEY
(AWU8221)
9
8
7
6
5
4
R5102
R5103
R5104
R5105
1.0k
1.2k
1.5k
1.8k
3
HDD/DVD
2
-
1
+
E
REC STOP
REC
S5101-S5106: VSG1024
OPEN/CLOSE
GNDD
VFDP
KEY R ASSY (AWU8222)
(Y)
: Video Signal Route (C)
(L2)
Switches KEY L ASSY
S5107 : STANDBY/ON
S5108 : VOLUME –
S5109 : VOLUME +
S5110 : 3 PLAY
S5111 : 7 STOP
: Audio Signal Route (LINE 2)
(HP)
KEY R ASSY
S5101 : HDD/DVD
S5102 : – / 4
S5103 : + / ¢
S5104 : & STOP REC
S5105 : ¶ REC
S5106 : 0 OPEN/CLOSE
6
F
I J L MN O P
57
XV-DVR9H
5
D
CN5105
R5111
51048-0800
P
KN5851
VNF1084
L
(L2)
VKN1240
(C)
D
3
GND
XTPB
TPB 2
GND
GND 4
XTPA
TPA 6
XTPA
CN5001
1
GNDD
R5204
100
VNF1084
KN5201
5102
CN5101
VE+5
GNDFL
KEY1
KEY2
GNDD
IR
FLDCVFDP
FLDC+
GNDAV
S5101
CN5801
VKB1206
V
VE+5
16
22
S
5
S5106
Q158
UN5112
W116
S5105
10
Y
C
2
S5111
1
EVOLDATA
1
3
4
(C)
470p
EVOLCE
2
6
470p
1
3
9
C 1/2 CN704
XKP3082
C5825
CN809
CN807
XKP3082
(Y)
JA5202
C5826
23
S5110
22
UVOUT
0
GNDTV
23
C5201 R5203
75F
22
0
21
R5215
21
VS+13
3
20
1 2
19
VI+5
R5209
VSA-12
20
R5202
75F
19
JA5201
VKB1190
(C)
47
18
S5109
VSA+12
(L2)
18
(Y)
470p
17
EVOLCLK
GNDA
0
NO MARK DIODE
1SS133
16
VNF1084
R5152
R158
HPDET
RECMUTE
B
KN5301
13
GNDAV
14
Y
15
GNDAV
16
C
17
GNDAV
52044-1745
S5108
Q157
16
17
11
GNDFL
C185
4.7k
15
3
8
R157
HPR
C5304
0.1
12
S5104
VSA+12
15
1
10
C5207
GNDAV
7
14
470p
6
13
GNDHP
C5208
VS+13
HPL
14
2
4
5
9
C5151
0.022
5
13
(L2)
7
HP
7
6
3
8
VFDP
VAV+9
12
C5152
47/16
GNDD
4
OUT
3
11
GNDA
(R3993)
0
JQ-TS
3
2
AINR
12
S5107
IN
1
11
6
JA5301
AKN7005
(R3991) (HP)
0
0
(R3992)
(HP)
5
VE+5
VI+5
10
3
4
IR
2
-TS
IC156
BA178M05FP
10/50
C184
1/50 -TS
75mA
VO+5
C 1/2 CN702
1
GNDA
10
GNDHP
HPL
GNDAV
SDET2
GNDAV
L
GNDAV
R
GNDAV
V
68
S5103
B10B-PH-K-S
9
GNDD
CN153
AINL
R5301
FLDC-
DGRTN
8
9
1
FLDC+
1
8
GNDA
CN5201
HPDET
HPR 2
S5102
VE+56
7
C
2
LOUTR
IR
VE+33
6
7
VE+5
3
5
GNDA
KEY1
SWVION
LOUTL
6
GNDD
VE+76
4
5
A
FRONT JACK ASSY
(AWU8226)
M
1/2 CN703
5
4
C 1/2 CN705
GNDD
GNDA
51048-0300
6
3
4
5105
VD+5
3
J5202
7
2
TVR
D20PYY0305E
VT+9
GNDA
5104
VS+6
8
W247
C181
10/50 -TS
C180
1/50
-TS
2
OUT
3
9
2
8
TRADE ASSY
(AWU8224)
L
51048-0300
10 VA+5
G 1/4 CN803
11 VSA+12
G 2/4 CN5501
12 BEAT CUT
1
5103
13 FL ON
TVL
51048-0800
14 PO ON 1
1
J5201
15 GNDTV
IN
1
XKP3082
XKP3082
16 VE+37
137mA
CN808
CN806
CN152
B16B-PH-K-S
IC155
BA178M09FP
7
D20PYY0840E
5
7
8
1
2
3
4
3.19 POWER SUPPLY UNIT
A
Q POWER SUPPLY UNIT (AWR7013)
7
6
5
1
2
3
4
CL
R252
680
R251
680
D252
6.8B
PC151
C251
100/16
(R162)
(100k)
Vcc
C201
220p/1k
D155
1000p/50V
R122
47/2W
D501
D108
27B
L101
IC101
6
2
7
1
8
L701
TH102
C801
120/63
PC601
C108
47/35
250V 117°C
C111
0.22
C113
1500p
R114
150k
R113
1k
PC101
D701
D106
FU101
4A 250V
49103.5
IC802
D801 3.5A/125V
PC501
R115
1.5M
R116
0
D901
CN101
AC INLET
RDU25
PC502
R117
1.5M
IC951
1.25A/125V
R118
0
AC POWER CORD
Q
D951
CAUTION : FOR CONTINUED PROTECTION AGAINST
RISK OF FIRE. REPLACE ONLY WITH
SAME TYPE NO. 49103.5 MFD, BY
LITTELFUSE INK. FOR IC802 (AEK7017).
C951
220/16
58
C131
2200p
XV-DVR9H
1
L951
4911.25
NEUTRAL
LIVE
R901
10 1/4W
2
3
4
C952
47/35
E
(R171)
(Z101)
C110
0.47
(R172)
C101
0.22
R112
22
D902
MAZ22700A
3
C901
47/50
5
C701
2200/10
4
C109
6800p
C112
0.22
R101
1M 1/2W
F
C601
2200/10
C501
680/16
D107
R109
47
R601
1k
D601
R609
47 2W
R111
10k
R110
22
C136
1000p
L501
D1NL20U
D750 MTZJ4.3B
(Z102)
(R108)
R107 100
(R173)
C133
220p
D
D350 MTZJ39B
Q101
R106
0.1 1W
C132
220p
D550 MTZJ15B
D121
R105
0.1 1W
L102
C405
220/35
D1NL20U
R102
47k 1/2W
C102
0.1
D451
R103
47k 1/2W
(R104)
C107
100/400
C106
100/400
(C135)
(R105)
TH101
(C134)
C105
100/400
C
D401
C401
220/35
D104
C301
1000p/1k
R123
100k/2W
D102
R153
22
R301
4.7k 1W
C154
R152
470k
RDU25
D301
C122
2200p/1k
D101
D103
R202
22 1/4W
D201
C153
1/50
PC151
R151
15k
T101
C451
470/35
Vdd FB
C302
120/63
C152
0.1
Drain
8
D251
(D161)
IC151
Source
B
(R161)
(100k/2W)
(C161)
(2200p/1k)
T151
5
6
CN208
4 VS+12
3 GND
2 GND
1 VS+5
To HDD
3 GND
2 GND
1 VS+5
4 VS+12
4 GND
3 VE+6
2 GNDA
1 VE+15
To DRIVE ASSY R7
A
D 4/5
CN4001
CN201
1 GND
C403
1000/16
CN205
CN706
8
CN204
C 1/2
7
2 VS+6
IC401
LD1084V120
OUT
IN
IC701
LD117V25
3 GND
4 VS+2.5
GND
C704
47/35
B
Q201
6 VS+4
7 VS+4
C402
47/35
R203
1k
D203
R204
27k
C203
120/63
C303
47/35
D302
1SS133
IC301
L78M15CP
8 VS+4
IC402
1.5A/125V
L401
Q401
R402
10k
C404
47/35
5 GND
CN202
49101.5
Q402
1 VE+37V
2 GNDTV
R403
1k
IC451 PQ12RD08
2
1
4
R452
1k
C452
47/35
3
3 P-ON1
R904
PC901 1.5k
R552
10k
6 GND
PC502
R451
1k
R551
680
PC501
4911.25
IC501
1.25A/125V
7 VSA-12
4911.25
Q601
491.750
10 GND
2
4
11 VS+13
D
12 STBY
PC601
13 VE+7.6
R611
1k
Q602
R253
1k
C605
1000/10
3
R608
1k
C603
1000/10
C502
47/35
IC601
9 VSA+12
IC602
KA378R05
1
JP285 R605
0
15k
C602
0.1
8 GNDA
D551
4.3B
IC604
0.75A/125V
R610
1k
R607
10k
VR601
10k
IC603
1.25A/125V
R604
18k
R602
680
PC101
C604
1/16
L601
R603
100
C
4 FL-ON
5 B-CUT
C453
47/35
L451
14 GNDD
15 VE+6
C703
47/35
49102.5
IC702
2.5A/125V
16 VS+6
Q701
17 FLDC(+)
Q702
R701
10k
R702
1k
18 VFDP
C705 1/16
19 FLDC(-)
Q801
E
C803
47/35
20 GNDFL
21 GNDFL
Q802
Q901
Q902
Q803
Q903
R801
10k
IC801 L7912CP
R802
4.7k
I
R902
10k
Q951
R903
22k
CN151
R953
270
D953
5.1B
D952
2.4B
PC901
C954
1/50
Q952
R951
2.7k
LITTELFUSE INK. FOR IC501, IC603, IC951 (AEK7048).
C953
0.1
R952
10k
F
59
XV-DVR9H
5
6
Q
7
8
1
2
3
4
3.20 WAVEFORMS
Note : The encircled numbers denote measuring point in the schematic diagram.
A
C
JACK ASSY
Measurement condition ;
No.1, No.18 to No.30
No.3, No.16
No.2, No.31, No.32
No.17
1
CN704-pin 1 (UVOUT)
(Function : Tuner 2 ch)
V: 500mV/div. H: 10µsec/div.
2
CN704-pin 23 (TVL)
(Function : Tuner 2 ch)
V: 1V/div. H: 200µsec/div.
3
IC501-pin 25 (V/Yout)
(Function : DVD play)
4
IC701-pin 60 (R/Cout)
: 75% Color-bar
: 75% Color-bar, APX disc 1-24
: 1kHz, 2Vrms
: 1kHz, 2Vrms, APX disc 1-1
6
IC701-pin 56 (B)
7
IC701-pin 60 (R/C)
8
IC701-pin 63 (YOUT2)
9
IC701-pin 65 (COUT2)
11
CN701-pin 4 (YOUT)
12
CN701-pin 6 (COUT)
13
CN701-pin 8 (GOUT)
14
CN701-pin 10 (BOUT)
16
IC503-pin 2 (YCMIX)
17
IC501-pin 42 (Lout)
B
GND
GND
GND
GND
C
GND
GND
D
GND
GND
GND
GND
GND
18
JA502-pin 20 (V/Yin)
(Function : LINE1 IN)
GND
GND
5
E
IC701-pin 58 (G)
GND
GND
10
IC701-pin 68 (CVOUT2)
15
CN701-pin 12 (ROUT)
19
JA502-pin 15 (R/Cin)
GND
GND
GND
GND
F
60
XV-DVR9H
1
2
3
4
5
C
20
6
7
8
JACK ASSY
A
JA502-pin 11 (Gin)
25
CN701-pin 24 (Y/CVBS)
26
CN701-pin 26 (C/CB)
30
Q207-E (CRIN)
31
JA502-pin 6 (Lin)
GND
GND
21
JA502-pin 7 (Bin)
GND
B
GND
GND
GND
22
JA502-pin 15 (R/Cin)
27
CN701-pin 22 (CR)
32
CN701-pin 28 (ALT to M)
C
GND
GND
GND
23
CN701-pin 24 (Y/CVBS)
28
Q805-E (YIN)
D
GND
24
CN701-pin 26 (C/CB)
GND
29
Q206-E (CBIN)
GND
GND
E
F
61
XV-DVR9H
5
6
7
8
1
D
2
3
4
MAIN ASSY
Measurement condition ;
A
No.3 to No.8, No.10 to No.13
No.15 ,No.16
No.9, No.14
No.17
1
X4102 - pin 4 (ADMCLKI)
V: 1V/div. H: 20nsec/div.
(Function : P.ON)
: 75% Color-bar, A1 disc 2-20
: 75% Color-bar
: 1kHz, 2Vrms, A1 disc 2-1
: 1kHz, 2Vrms
6
Q2105 - B (Cr)
(Function : PLAY)
7
Q2101 - B (Y)
(Function : PLAY)
8
CN2001-pin 23 (Cb Out)
(Function : PLAY)
11
CN2001-pin 29 (Y Out)
(Function : PLAY)
12
CN2001-pin 27 (C Out)
(Function : PLAY)
13
CN2001-pin 25 (Y Out)
(Function : PLAY)
16
CN2001-pin 7 (SEL C)
(Function : L1)
17
CN2001-pin 5 (SEL L)
(Function : L1)
18
IC3402-pin 7 (27MCLK)
(Function : P.ON)
GND
B
GND
2
R4205 (VMCLK)
(Function : P. ON)
GND
GND
GND
GND
3
C
Q2103 - B (Y)
(Function : PLAY)
GND
GND
GND
GND
4
Q2102 - B (C)
(Function : PLAY)
GND
9
CN2001-pin 17 (Lch Out)
(Function : PLAY)
GND
14
CN3001-pin 13 (PCMAIN)
(Function : PLAY)
D
GND
GND
5
Q2104 - B (Cb)
(Function : PLAY)
GND
10
CN2001-pin 21 (Cr Out)
(Function : PLAY)
15
CN2001-pin 9 (SEL Y/V)
(Function : L1)
E
GND
GND
GND
F
62
XV-DVR9H
1
2
3
4
5
6
7
8
4. PCB CONNECTION DIAGRAM
NOTE FOR PCB DIAGRAMS :
1. Part numbers in PCB diagrams match those in the schematic
diagrams.
2. A comparison between the main parts of PCB and schematic
diagrams is shown below.
Symbol In PCB
Diagrams
Symbol In Schematic
Diagrams
B C E B C E
Part Name
3. The parts mounted on this PCB include all necessary parts for
several destinations.
For further information for respective destinations, be sure to
check with the schematic diagram.
4. View point of PCB diagrams.
Connector
A
Capacitor
Transistor
B C E
B
C
E B
C
SIDE A
E
Transistor
with resistor
B C E
D
G S D
G S
B
Field effect
transistor
D G S
P.C.Board
Chip Part
SIDE B
Resistor array
3-terminal
regulator
C
D
E
F
63
XV-DVR9H
5
6
7
8
1
2
3
4
XV-DVR9H
64
A
A
F
Q300
Q303
IC302
Q313
Q304
Q305
Q306
Q312
Q317
Q310
Q308
Q309
Q302
Q316
Q311
Q307
Q319
Q314
Q315
Q301
(ANP7512-B)
(ANP7512-B)
C339
L311
C333
R335
L309
C334
KN300
R348
R342
R318
R349
C332
C341
Q305
Q306
C331
F304
R332
R320
D303
R322
1
C336
13
24
1
13
R344
24
C325
C344
C337
12
12
C330
AFC Adj.
4
R352
R333
Q315
Q311
C348
Q317
Q309
C324
R361
R360
Q319
CN300
R338
R339
Q308
Q316
CN300
C322
AFT
R314
EL FR4 P
R
C309
GND
Q304
R312
C343
AGC
C346
L314
TV MODULE
ASSY
GND
LF
C306
R307
C307
C316
C314
R306 C315
R311
C305
Q302
R301
E
E2
Q301,Q311
4
E2
R305
4 E2
E
E
R304
C312
1
L302
Q313
Q303 R303
19
C318
R310
C304
R302
E
B
C2
1
1
B CN351
C347
C345
191
L316
R355
R315
C301
R358
C310
R316
AWU
L301
L303
R300
C320
D300
Q300
D301
C311
U301
C319
0
1
2
3
4
5
6
7
8
9
R319
R337
AGC Adj.
L305
C327
R313
NC
R330
C349
C326
L300
1
R308
V+6E
C303
C300
A-
0
1
2
3
4
5
6
7
8
9
R329
L313
GNDTV
UVOUT
GNDTV
LDASH
LM/
P_SAVEBS
GNDTV
SIF
GNDTV C338
VE+37 R343
GNDTV
VE+6
GNDTV
C329
TUON
R326
AFT
R327
SDA
R328
SCL
AGC
R323
R356
F302
C302
C313
R309
GND
4
Q301
4
GND
70
81
2
3
4
5
6
7
8
9
R351
R324
R325
Q312
R340
C342
Q310
R341
F303
R334
R321
IC302
R331
AFC Adjust
4
1
R357
L307
C317
V+5TU
L306
C323
C308
L304
LF
19
AGC
3
L315
2
GND
F301
C328
R359
TV MODULE ASSY
AWU8217
AWU8220
AWU
L312
R317
R350
AGC Adjust
VR300
F305
R345
F306
CN300
E2
C335
R336
D302
Q307
R354
Q314 R353
R346
R347
GND
NP
E
C340
R
EL FR4 P
E
D
C
B
C
B2
E2
A TV MODULE ASSY
A TV MODULE ASSY
A
SIDE A
SIDE B
4.1 TV MODULE ASSY
1
2
3
4
5
6
7
8
4.2 TV CONNECT ASSY
SIDE A
SIDE A
A
B
TV CONNECT ASSY
G CN5503
G CN5504
CN361
CN471
R430
CN361
C5711
19
C5707
19
C403
C452
C426
B
R5713
R413 C425
C431 C430
C422
L402 L401
12
12
22
22
C415
C412
9
11
11
IC5701
Q400
C417
C400
1
23
23
R400
X5701
L403
1
R493
33
33
34
34
13
C410
X400
C416
13 13
CN461
1
44
44
C414
Q402
L404
CN351 R412
1
R416
1919
C401
KN401
C406
19
C408
D
KN402
OPEN SIDE
OPEN SIDE
C
(ANP7510-C)
Q400
Q402
Q5623
Q5622
IC401
CN351
IC5701
R494
1
FR4 P
TV CONNECT ASSY
AWU8203
AWU8206
E
AWU8209
R45
IC401
R428
R429
R
C453
C5712
16
19 1
1
CN471
1
8
19
1
1
A CN300
SIDE B
SIDE B
B TV CONNECT ASSY
CN461
10
19
CN351
C427
R421
15
113
13
5
R
Q405
C402
5
Q404
C432
C405
R404
R417 Q403
R405
C451
R5712
C5708
E
L400
CN471
R419
R426
C440
C439
1
C454
R402
D400
R406
19
C421 C419
R423 R409
C435 R411 R403
R418
C428
C423
C404
R407
NCorVD+5
NCorRDSPOW
NCorRDSCLK
NCorRDSDAT
NCorGNDD
NCorXRST
VS+6
NCorSTBYQ
10 VT+9
NCorDCTRI
SU/SAPID
GNDTV
5 UV_RIN
GNDTV
UV_LIN
GNDTV
SD/STID
1 FOMOI
Q401
R415
C424
R420
R401
C5709
C5710
15
OUT
C413
C411
IN
19
FR4 P
19.MIONTA
MUTE
GNDTV
UVOUT
15.GNDTV
NCorLDASH
NCorLM/
JUSTorP_SAVEBS
GNDTV
10.VE+37
GNDTV
VE+76
GNDTV
GNDTV
5.TUON
SDA
AFT
SCL
1.AGC
Q406
C429
C407
119
IC451
10
CN461
C409
C418
C433
C434
C438
C437
R491
R431
R492
NCorRDS
0 -A
1
2
3
4
5
6
7
8
9
R414
AGC
SCL
SDA
AFT
TUON
GNDTV
VET+6
GNDTV
VE+37
GNDTV
NCorSIF
GNDTV
JST PSBS
NCorLM/
NC LDASH
GNDTV
UVOUT
GNDTV
NC
0
1
2
3
4
5
6
7
8
9
R408
C436 R422
R424 R410
C442 C420
MUTE
MIONTA
FOMOI
SD/STID
SU/SAPID
GNDTV
UV_LIN
GNDTV
UV_RIN
GNDTV
VT+9
GNDTV
GNDTV AWU
7 0
8 1
2
3
4
5
6
7
8
9
R432
D
CN351
C5713
R5714
R5715
1
CN361
R425
(ANP7510-C)
Q403
CN471
Q405
Q404
Q406
Q401
IC451
R427
F
B
B
65
XV-DVR9H
5
6
7
8
1
2
3
4
4.3 JACK and TRADE ASSYS
SIDE A
A
C JACK ASSY
21
20
4
3
1
6
4
3
1
6
4
3
1
6
4
CN705
2323
C221
4
C222
1
1
L703
R729
CN704
6
IC503
4
4
4
3
1 3
5
5
6 4
1
1
88
1
C235
55
C218
8
44
8
1
1
IC205
C749
CN704
5
R
Y ASSY
8215
6
1
EL FR4 P
CN705
C226
6
IC206
R560
2323
1
32
1
C
XV-DVR9H
3
R
C
C69
1
CN702
C223
4
4
6
R723
R726
L702
C746
C741
L701
L704
C751 R730
IC502
C692
C691
4
R706
R708
C703
C704
C705
C706
C707
C708
1
6
C747
C742
C752
C551
C722
C715
R705
C721
C717
C716
Q701
1
3
R704
C617
1
R703
C714
R707
R709
C615
C613
R639
6
80
4040
21
C712
R691
IC207
4
61
20
20
D702
C709
21
C710
R701
C227
44
Q703
R732
Q704
R725
C549
1
1
C702
R702
C619
C621
R631
R632
R641
C228
66
3
3
R219
Q706
CrIN
GND
Y/CVBSIN
GND
C/CbIN
GND
ALT2M
GND
ART2M
GND
AGCCTL
XCSTBY
EXTRGB
BLANKIN
XTHROU
FUNC
XPSAVE
AVLOUT
AVLIN
X525P
S1/MUTEMASK2
SDET3/MUTEMASK1
SDET1/SAMUTE
AOUTMUTE
SDET2
TEXTV
1.V+5V
SYNCAFT
CLPOUT
SYNC
GND
SWSTBY
Y/VM2T
SCL
GND
SDA
CM2T
EVOLCLK
GND
GM2T EVOLDATA
EVOLCE
GND
BM2T
GND
UVOUT
RM2T
GNDTV
GNDA
VS+13
ARM2T
VI+5
GNDA
VSA-12
ALM2T
D201 L204
VSA+12
GNDA
C219
RECMUTE
(GT2M)
C216
HPDET
GND
HPRO
CSYNCIN
R227
GNDHP
21.GND
HPLO
GNDA
AINR
GNDA
AINL
C217
GNDA
C555
LOUTR
C554
GNDA
R635
LOUTL
GNDA
TVR
GNDA
C552 C553
TVL
R716
C756
C757
R717
61
C713
D CN2001
2
C701
C711
F
1
80
D701
R591
C618
C625
C624
C623
R594
R593
Q592
A
CN701
66
C732
C733
R579
R633
R596
Q514
C616
D586
R534
Q509
Q593
D585
R590
R559
R640
C614
C610
R642
Q512
R574
D512
Q601
D703
C591
R
R
R575
D519
D520
D514 D515
C731
D591
D592 Q591
R595
C635
C636
Q506
L203
R213
1
1
R728
R724 R727
C748
C743
R657
R204
A
Q508
R211
3
3
E
C212
C220
R218
C215
CN701
32
1
NP
Q202
C201
R731
C753
IC205
KN781
R208
1
4
E2
R205
C234
IC201
LF
for
Repair
Q704
Q703
Q706
E
C230
C233
C206
C205
C739
IC208
R206
R207
C560
R578
C550 R573
C609
C229
C207
R209
E2
Q702
IC206
IC201
R535
VR203
88
3
11
3
C236
1
IC702
6
C738
C607
Cr Level
1 IC211
C209
1
C204
3
4
R722
C639
3
99
E
Q202
C735
FC ICT
Q702
1
Q602
VR202
C232
C231
C734
IC702
IC207
IC208
C608
Cb Level
1
4 6 Q207
R241 R235
R230
R246
16 IC203
16
R619
R617
3
C211
C644
R638
C643
R637
JA502
R589
R587
R588
C640
VR201
6 Q206
R233
R245
R229
Q781
IC503
IC502
C605
R620
R618
R604
C642
1
4
IC210
R234
R242
Q503
IC203
D
Y Level
3
6 Q805
R239
R240
R236
Q784
Q783
IC651
Q701
Q505
Q504
Q782
C
4
R244
FC2
IC202
R228
R232
C210
R231
IC701
Q515
Q206
IC210
Q506
Q512
Q502
Q509
Q501
Q593
Q592
Q514
Q207
IC211
Q785
R238
C604 C603
R601
R602
IC209
R237
PC
B
C208
C641
R603
JA702
IC504
Q601
Q602
Q513
IC209
Q510
Q508
Q511
Q591
Q805
D518
R533
R658
R558
C606
4
1
I
C782
Q783
Q782
C781
R782
C789
R784
C790
C787
D781
E2
E
C783
C785
C786
OUT
3
2
KN782
Q781
R781
XCSTBY
VSA-12
GNDA
VSA+12
GNDAV
VS+13
VAV+9
GNDD
VI+5
VO+5
23 23
C558
D511
R563
1 1
R655
R662
CN808
CN809
23 23
C692
C691
1 1
R567 C559
R661
C793
4
1
C533
R568
GNDAV
C
GNDAV
Y
GNDAV
V
GNDAV
R
GNDAV
L
GNDAV
SDET2
GNDAV
HPL
GNDHP
HPR
HPDET
C535
GNDSC
VE+6
GNDA
1.VE+15
CN706
D782
Q784
NP
NP
11
C792
C791
IC202
Q785
C788
C202
C534
C528
C537
C530
5
C224
4
R547
R548
C536
Q501
R546
R500
R510
R509
C526
C525
D506
D505
R554
R555
C548
R656
C720
C
C719
C718
C715
R705
C721
C717
C716
88
C502
Q515
C517
C512
IN
E
E2
60
C508
R516
C503
C509
C507
R515
C541
R545
R580
C506
Q502,Q510,Q511,Q784
R532
R556
D516
R704
4
1 2
4
R506
R598
R584
C501
R599
C505
C511
C518
C522
C539
C529
C547
D504
41
41
4
R514
R597
R512
C523
D533
IC701
R703
61
C714
1 CN706 4
R508
C510
R507 R505
C565
R562
D529
D525
D524
R549
5 5
D510
R582
R733
R734
R735
20
20
R564
TRADE ASSY
L
CN808
CN809
R
20.XTROU
BLANKIN
XTRGB
CSTBY
LF
1.EVOLCE
EVOLDATA
EVOLCLK
SDA
5.SCL
SWSTBY
SYNC
SYNCAFT
TEXTV
10.SDET2
AUTOMUTE
SDET1/SAMUTE
SDET3/P_CONT
S1
15.X525P
AVLIN
AVLOUT
XPSAVE
FUNC
TRADE ASSY
AWU8224
1.TVL
GNDA
TVR
GNDA
5.LOUTL
GNDA
LOUTR
GNDA
AINL
10.GNDA
AINR
GNDA
HPLO
GNDHP
15.HPRO
HODET
RECMUTE
VSA+12
VSA-12
20.VI+5
VS+13
GNDTV
UVOUT
E
CMKM-P3X
C L
G CN803
G CN804
R537 R536
R538
D509
8
8
IC504
R581
D522
C758
R716
C756
C757
1
1
M CN5201
I CN153
8
7
6
5
1
4
C556 1 4
C549
R558
R717
80
CN703
CN702
(ANP7514-B)
CN806
CN807
17
1
23 23 1
CN806
23
1
CN807
1 1
23 23
1 1
23
E2
C732
C733
10
1
CN702
Q503
17
R691
Q504
D705 D706
D704
R753
R783
R566
R570
R565
C557
1
10
1
CN703
C696
R694
C695
R693
R692
C693
C694
C651
D501
4
C784
C652
NP
NP
R540
R541
R557
R571
IC651
Q505
R572
R654
C653
R651
R652
C654
R653
R701
C722
D502
NP
C712
5
1
C225
D503
RY501
C724
R551
C723
C515 C516
R519 R520
R517
R521
C513
4040
21
21
Q202,Q702
C
B2
E2
E
B
C2
C524
NP
C726
R531
6
10
C521
Q502
C725
R569
R553
4
C728
C727
B
D584
61
R511 R513
C561
C730
60
D581
E2
D583
R583
D582
C729
R526
R524
C563
JA501
R574
R525
C566
Q511
C731
Q513
R561
C564
A
R575
E
E
D521
D703
Q510
R523
D519
D520
D514 D515
D528
C567
C545
R518
R522
C514
R529
R527
C550 R573
2
20
D508
2
D507
D517
C520
R530
R528
C519
JA502
1
21
1
8
7
6
5
SIDE A
A
UPPER SIDE
(ANP7512-B)
D
F
67
XV-DVR9H
80
AWU
JACK MY ASSY
AWU8215
1
(ANP7514-B)
68
2
1 23
17
1
E
1 23
VSA+12
1
22
R543
CONTACT BOTTOM SIDE
CN808
1 23
CN806
3
R710
R713
GNDAV
GNDV
GNDA
RIN
V/YIN
R576
D
CN703
CN809
1 23
F
CN807
C L
XV-DVR9H
4
LIN
2
C760
1
(ANP7512-B)
CN702
IC501
C755
22
R660
10
1
GNDV
BLANK
GNDV
NC
N-LINK
FUNCTION
GNDV
R539
GNDV
R/CIN
GNDV
GIN
GNDV
BIN
GNDV
LOUT
ROUT
GNDV
V/YOUT
GNDV
R/COUT
GNDV
GNDV
GOUT
FUNCTION
BOUT
21
R712
R715
R714
R711
NC
GNDV
BLANK
N-LINK
R552
LIN
LOUT
ROUT
3
C754
23
R544
R577
JA501
AV1
VSA-12
GNDA
VSA+12
GNDAV
VS+13
VAV+9
GNDD
VI+5
VO+5
23
C540
C546
R585
20
XCSTBY
44
VSA-12
44
R550
C527
C542
B
20
CN702
R542
C538
1
C531
R659
R501
R503
GNDA
RIN
2
TEXTV
10.SDET2
AUTOMUTE
SDET1/SAMUTE
SDET3/P_CONT
S1
15.X525P
AVLIN
AVLOUT
XPSAVE
FUNC
20.XTROU
BLANKIN
XTRGB
CSTBY
TRADE ASSY
C532
GNDAV
R504
R502
D530
21
1.EVOLCE
EVOLDATA
EVOLCLK
SDA
5.SCL
SWSTBY
SYNC
SYNCAFT
B
V+9V
C203
Q785
R586
C504
D531
D526
TRADE ASSY
AWU8224
CN703
GNDAV
C
GNDAV
Y
GNDAV
V
GNDAV
R
GNDAV
L
GNDAV
SDET2
GNDAV
HPL
GNDHP
HPR
HPDET
VE+15
VSC+5
D527
VS+13
GNDTV
UVOUT
L
1
1.TVL
GNDA
TVR
GNDA
5.LOUTL
GNDA
LOUTR
GNDA
AINL
10.GNDA
AINR
GNDA
HPLO
GNDHP
15.HPRO
HODET
RECMUTE
VSA+12
VSA-12
20.VI+5
CN706
GNDSC
VE+6
GNDA
VE+15
2
23
D532
1
C
2
23
11
R
A
EL FR4 P
SIDE B
D523
1
4
C JACK ASSY
11
2
JA502
AV2
C761
C759
5
6
7
8
SIDE B
GNDV
VOUT
GNDV
R/CIN
GIN
GNDV
A
21
21
20
L
R
AUDIO OUT
V/YIN
GNDV
BLANK
GNDV
N-LINK
NC
20
L
R
AUDIO IN
A502
0
1
0 1 2 3 4 5 6 7 8 9
0 1 2 3
AV2
Y Level
B
R214
R216
2
3
4
5
6
7
8
9
2
3
4
5
6
7
8
9
2
3
4
5
6
7
8
9
7 0 0 0 -A
8 1 1 1
R217
L202
15
IC601
IC501
R203
15
1
AWU
1
R215 R202
IC601
Cb Level
C620
16
Cr Level
GNDAV
5
16
30
30
C622
C754
VAV+9
R212
R592
A
B
C
1
R201 R210
0
JACK MY ASSY
C
GNDD
VI+5
VO+5
LF
R719
D
IC201
5
R718
R720
C737
VI+5
C736
1
R247
23
R224
Q205
Q203
R221
Q201
Q203
Q205
C750
C740
C745
Q204
A
E
CSYNCIN
CrIN
Y/CVBSIN
C/CbIN
ALT2M
ART2M
AGCCTL
VO+5
V+5V
CLPOUT
Y/VM2T
CM2T
GM2T
BM2T
RM2T
ARM2T
GNDA (GT2M)
ALM2T
TVL
R225
R226
CN701
Q204
R222
Q201
UVOUT
GNDTV
VS+13
VI+5
VSA-12
VSA+12
RECMUTE
HPDET
HPRO
GNDHP
HPLO
GNDA
AINR
GNDA
AINL
GNDA
LOUTR
GNDA
LOUTL
GNDA
TVR
GNDA
for
Repair
R243
1
CN704
CN704
R721
C213
L201
C238
R220
C214
23
CN705
XCSTBY
EXTRGB
BLANKIN
XTHROU
FUNC
XPSAVE
AVLOUT
AVLIN
X525P
S1/MUTEMASK2
SDET3/MUTEMASK1
SAMUTE
AOUTMUTE
SDET2
TEXTV
SYNCAFT
SYNC
SWSTBY
SCL
SDA
EVOLCLK
EVOLDATA
EVOLCE
C237
1
CN705
1
CONTACT BOTTOM SIDE
CN701
F
C
69
XV-DVR9H
5
6
7
8
1
2
3
4
4.4 MAIN ASSY
D MAIN ASSY
SIDE A
C5124
L5502
C5127
C5103
C5214
C5122
R5121
C5120
2
8
C1050
2
8
1
7
2
1
R1003
8
L1001
C1042
L1005
C1059
L1006
R1008
C1038
R1004
L1003
C1036
R1005 C1035
R1074
C1053
C1058
C1030
L1004
C1056
C1029
2 C4211
3
C3107
X4201
IC3101
16
1
L4202
C3255
D3103
R4204
4
R3108
R3107
R3106
R3105
9
R4201
C4202
8
IC4205
5
C4210
4
D4202
D4201
C4203
R4209
R4210
C4201
F4201
1
C4208
C4209
L4201
R4205
7
R3104
C1024
C1026
TP1029
TP1028
TP1027
7 1
7 R5274 1 R5273
R5132
R5131
TP5106
C1060
L1007
R1009
C1041
C1037
C1055
R2107
Q2103
TP1032
R4202
C4206
5
4
R4207 R4208
TP1012
TP4202
C4207
4
R2015
R2026
R2014
TP2017
TP2025
TP2013
TP2023
R2013
R2012
TP2012
TP2016
R2011
R3271
TP2011
R3270
TP2008
TP2009
XV-DVR9H
TP2014 TP2024
Q2241
R2047
TP2022
TP2006
TP2005
TP2004 R2027
TP2003
TP2021
TP2001 R2412
TP2019
TP2002
TP2020
TP2018
R2025
R2040
C3251
TP2007
C2243
R
R
R
R
R
R2254
R2253
R2255
C2405
8
IC2302
4
R2404
R2405
R2411
R2406
3
R5123
C5119
C5118
C1003
C1004
C1034
R1006
Q2102
C2103 R2103
R1080
8
D
2
TP1013
VC4201
F
70
C5123
R5124
R5112
R5113
C1509
C1028 C1002
C1510
C1001
C1016
R1011 TP1051
Q2104
C1027 C1508
C1014
VR1001
VR1002
R1090
TP1060
C1011
R2109
C2105
C1025
L1009
C2210
IC4206
R1031
C2241
1
TP2505
TP2504
TP2503
TP2502
R2408
TP2501
1
3
C1006
C1049
R2227
TP1030
R1045
C2406
TP2506
Q2403
R2407
7 C2311
R2409
1
R2502
8 R2306
2
TP48
C2305
C2407
C1047
C1039
R5222
7 1
71
R1066 C1051
C1048
R5223
R4211
R4206 R4212
C2302
1
TP49
8
1
R2308
C2308
IC2301
5
TP50
Q2101
C2104
C1013
C2220
C2223
8
1
1
IC2211
4
R1905
IC2302
IC4003 IC4005
IC3001
Q2403 Q2402
Q2001
R1012
R2112
R2113
R2102
C2102
C2331
R2334
R2332 R2208
C2332
1
R2214
R1043
R1048
R4213
4
C2334
7
CN1901
IC2301
Q2241
Q3201 Q3202
R2305
8 2
82
2
3
R2331
IC2331
4
6
C2333
R2333
R1904
R1903
R1902
R1901
C2206
C1045
C1052
TP1033
TP1024
R2209
Q2204
IC2211
R2301
C2208
Q2203
C1057
C1044
C1005
TP1026
TP1031
R2204
C2201
TP4302
C1021
R2239
C2205
IC4008
Q2203
IC3403
IC3402
C1012
R2233
R2235
R2221
R2205
TP4301 TP4303
IC4206
IC4205
IC3101
IC4004
IC2331
C2106
Q2311
R2312
C2202
R2203
R4304
R4303
C1019
R5285
5
2
R4302
C1018
C2101
5
2 8
8
R1034
R2111
R5289
R5290
C1017
Q2222
Q2402
2 8
TP15
D
R5127
C5113
TP1002
C2221
1
R5130
64
C1023
R2206
1 7
Q2202
1 7
1
C1022
C2222
R2210
Q2201
7
C1031
R1021 R1022
TP1050
R1024
TP1041
C2209
C2204
Q2201
Q2222
R2304
R2307
R2207
CN4301
C2306
48
R2106
R2105
Q2301
R2202 R2201
Q2202
R2302
TP4307
C2301
7
IC5204
IC3301
R2252
Q2302
R4306
7 1
1
C2246
Q2312
R2313
8
C5126
IC5101
49
R2116 R2114
R2314
R4307
TP14
Q2301
Q2103
R2266
R2311
R2303
2
8
2
R4305
R2115
C2265
TP4306
TP4305
TP4304
Q2101
Q2102
Q2302
Q2312
R5104
C1032
R1023
Q2105
C2319
C2317
TP1067
L1008
R4108
TP28
L1102
Q2105
Q2104
Q2311
R4110
IC4101
VR2105
C4103
R4101
R4106
C5111
R1071
R4104
R4107
C1104
R5105
C1054
VR2104
R4103
3
C4104
2
8
C4102
R4102
IC4101
C4105
5
4
X4102
1
R5106
R5128
R5129
16
TP2015
D1111
R4105 R1111 C1114
IC5202
R4109 C4107
R1052
C5105
17
33
C5125
C4106
1
Q1102
4
Q1102
R5107
C5104
R5126
32
R5103
C5110
C1061
X5101
R5125
7
C5138
B
1
C5121
R5115
R5117
R5110
C5137
IC5101
R5109
R5108
C5136
L5106
C5112
IC4007
L5105
L5102
L5501
C4034
L5104
L5101
E
C4033
C5132
L5103
C5101
C4032
7
C5102
CN5102
1
IC4007
C
F5101
TP4015
R5265
CN5001
CN5102
J
D4002
R5114
R5116
R5120
R5122
A
5
6
7
8
SIDE A
This PCB is six layer structure.
A
TP32
R5231
R5233
TP5201 R5216
7 R4406 1 7 R4405 1
8
2
8
2
2
8
2
1
C5206
R4508
2
8
2
8
R4507
1
7
2
CN4501
7 1
C5321
2
R4541
R4017
CN4001
CN4001
1
C4029
C4031
TP4009
Q CN201
8
R4015
R4018
R4020
F4003
E
TP4005
C4023
R4009
C4024
R2017
R4014
C3406
F4001
C4018
C4006
1
1
7
R3403
R3407
TP4001
TP4010
R2019
TP4002
Q2001
C4021
TP41
TP40
TP3012
TP42
TP3002
R4008
D
TP3003 TP3001 TP3014
TP3004
TP3005
TP3006
R4004
C4010
C4005
TP4012
IC4005
7
R4534
C4027
C4004
Q3202
CN4501
TP5204
R5244
R5239
R5241
C5208
R5245
R5242
TP3401
C3407
F3403
R3410
F3102
R3202
TP4011
TP3007
R4537
CN708
D4501
R4010
3
R3205
10
C3004
TP3008
1
TP3010
TP3009
C4028
R3411
R3408
C3105
R3103
TP3013
IC4008
TP4201
R3203 R3204
Q3201
IC3001
11
C3405
R3405
C3403
R3406
C3408
C3404
C3101
8
1
D3104
D3102
4
1
IC4003
TP3403
TP3402
IC4004
C3102
20
C3001
TP3011
8
F3402
5
D3002
R4019
D4001
1
C4014
TP4008
D3001
R4530
C3402
C4013
C3002
R3002
TP2017
TP2025
TP2015
R2015
R2026
R2014
C3106
9
IC3402
4
R4531
F
C5221
R5297
16
IC3403
R3409
R3001
R3025
R3024
R3023
R3022
R3003
C3251
TP2014 TP2024
D3101
D3103
C3255
R5298
5
1
IC3101
9
16
R3104
202
F3401
C3301
R3102
C3108
1
R5243
C5224
C3303
8
R3108
R3107
R3106
R3105
L5508
C5229
R4001
1
24
R3309
L3301
C3107
R2013
R5246
IC3301
R1008
C1040
C1058
C5231
C3302
R3313
R3305
2 C4211
TP1012
R4510
8
L1006
TP1013
C
C4020
R4501 R4503
R4509
R3310
R3307
R3311
R3312
R3306
TP2013 TP2023
C5223
IC5204
C1039
TP2016
R5294
R1031
C1049
007
R5293
C5222
12
R1066 C1051
C1006
C1059
C1047
C4401
R4504
R3304
13
C1005
C1048
7
C5230
R4435
8 R4538 2
R3303
1
R4432
1 7
TP3303
C1045
7
R4428
R4429
R5313
R5314
C5205
R5255
1
C1044
C1052
R5250
E
CN710
8
1 7
7
C5329
7 1
2 8
8
2
R5240
R5261
R5296
C1057
1
8
R5258
C5211
8 2
R5259
R5248
2
R5284
R5285
7
52
C5218
104
C5213
2
8
53
C5225
2
8
1
7
1
7
R1003
L1001
C1042
R5283
105
CN4401
1
R5227
R5228
CN4401
R5225
B
8
C5228
R5230
R5281
R5282
R5290
7
R5224
2
C5227
R5229
R5295
C1060
L1007
R5278
R5279
R5280
1
R5237
R5238
R4407
C5226
R5288
R5289
R5236
7
2
8
R5275
2
2 8
1
8
7
IC5202
C5217
R5276
R5286
R5277
R5287
C1050
C5123
R5124
R5127
R5132
R5131
TP5106
R5130
7 1
7 R5274 1 R5273
1
R5234
R5235
8 2
8 2
7 1
1
7 R5220 1 7 R5218 1
C5215
R5272
64
R5217
2 8
C5126
C5125
R5215
TP5202
2
R5128
R5129
16
R5232
R5214
8
L5507
7
R4408
C5216
R4436
1
C5103
C5127
7
C5104
5126
TP38
TP31
C5207
8
2
2
2 8
R5219
8
8
2
2
2 8
R5221
8
L5504
8
1
7 1
1 7
156 157
7
C5209
1
208
1
R5247
1 7
C5212
C5204
C5214
R5263
R5262
R5260
R5257
R5256
R5253
R5254
R5249
7
C5210
R5251
R5252
L5502
C5124
122
F
(VNP1960-C)
D
71
XV-DVR9H
5
6
7
8
1
2
3
4
D MAIN ASSY
SIDE B
A
TP1
8
R1305
1
C5203
IC1103
IC1104
7
2
8
1
7
C1309
2
C1310
R1306
L5503
TP2
C1302
C1313
TP3
TP8
43
L1301
IC1301
L1402
7
7
5
C1311
C1312
1
1
28
R1032
54
TP1016
7
1
7
1
17
1 R1410 16
C3006
G CN801
XV-DVR9H
3
R3014
D
R3019
CN3001
4
C32
R32
R3252
R3013
CN3001
TP10
R3258
R3261
R3260
R3257
1
TP11
F
IC3251
C3252
R3012
R3010
C3205
R3269
R3011
R3009
R1053
9
R3268
TP4007
8
7
R3017 R3015
24
R3016
C4003
IC3002
TP4006
C3003
C4017
C4016
F4002
R4016
TP4013
C4030
C3
C3257
R3267
14
1
C4009
R3201
C3208
C3254 R3251
TP3251
C3253
C3258
R4011
R4013
TP10
TP1
TP1014
C3207
R3254 R3255
R3266
C4008
R4005
R4012
C4011
R4006
R3265
C3201
R1055
R3262
R3263
IC3201
8
C3202
C4026
R3253
GND
IC4002
1 7
7
7 1
8 2 1
C3203
C1401
C4002
TP3253
2
C1409
C4012
C5008
F3201
C3204
2 8 2 8
R1408 R1409 R1411
5
28
8
IC5002
4
27
C1402
C4037
R5264
R1402
L1401
8
7
R4525
1
TP5004
C4007
2
C1407
7
1
2
C5005
8
7
R4519
2
1
C5007
8
R1407
IC1401
1 C1408
R5322
5
8
C5006
2
C1405
R1406
7
2
IC5322
8
7
R5209
8
C5323
L5321
R1033
TP101
8
1
2
R1404
7
R1405
1
C1406
4
R4518
1
TP5003
R5329
R5330
1
8 2
R5328
7
R4528 R4527 R4533 R4532 R4535 R4536
C5328
C5327
R5324
C5324
C1404
R5326
R5325
C5326
C5325
R5327
8
7 1
3
D5322
8
R5323
7 1
R4505
1
D5321
TP12
2
7
C1429
C5306
1
R4502 8 2 R4506 2 R4512
2
4
C5322
TP4004
1
8
R5342
R5343
8
7
R4423
8 2
7 1
IC5321
IC3251
72
2
1
TP1017
TP4014
TP13
7
R1065
27
C1403
4
5
R5321
C4022
IC3002
1
R1309
L5301
2
1
C5307
Q4000
E
8
R1412
R4529
C4015
2
8
C5343
R5301
Q4000
IC2501
8
1
2
R1426
R5341
C5309
C1427
R1310
2
C1428
IC1421
2
1
C5310
2 8
IC5341
R1425
7
8
C5342
9
8
1
R1423
2
1
16
44
C1426
C1425
R5310
C5301
7
8
IC5301
2 8
R5307
C5308
R4427
C4001
IC4002
IC1201
C1301
R1424
C5311
54
1
C1424
3
4
R5304
R4404
8
C5341
R5312
R4417
C4501
TP4003
R4401
2 8 2
7
TP4530
IC3201
1
IC5002
IC1101
D
7
IC4006
IC5322
IC1401
C1423
R5309 L5505
R5308
C4019
3
IC5321
IC1001
R5311
R5306
R5305
R4416
TP4502
TP4501
TP4506
TP4504
TP4503
TP4505
TP4508
TP4507
TP4509
TP4510
TP4511
TP4513
TP4512
TP4515
TP4517
TP4516
TP4518
TP4514
TP4519
TP4520
TP4521
TP4522
TP4523
TP4524
TP4526
TP4525
TP4527
TP4528
TP4529
C1421
C1422
R4410
5
C4025
IC4006
1
R4440
TP4416
TP4418
TP4414
TP4419
TP4420
TP4421
TP4422
TP4423
TP4424
TP4426
TP4425
TP4427
TP4429
TP4428
D4401
TP4430
1
C
7
IC1421
IC1102
R4403 R4426
IC5341
R4425 R4431 R4430 R4433 R4434
TP4417
7 1
IC5301
1
B
R4402
TP4402 TP4401
TP4406
TP4404
TP4403
TP4405
TP4408
TP4407
TP4409
TP4410
TP4411
TP4413
TP4415TP4412
TP2010
C3005
L2
32
5
6
7
8
SIDE B
This PCB is six layer structure.
A
TP5103
R5144
TP24
TP22
R1120
B
R1107 R1106
R1110
R1118
R1108
R1113
R1112
R1109
R1017
R1015
R1073
C1062
C1511
R1025
7 1 2 8 TP1058 TP1040
TP1052
TP1056
TP1059
TP1054
TP1055
TP1057
TP1053
TP1037
7
2
7
8
IC1102
1
R1076
2
1
8
7
R1077
1 7
TP1017
1
R1033
1
7
8
2
1
R5264
R1092 R1119 R1054
7
R1093
C1113
1
IC1001
C
C1105
7
7
TP101
2R10688 2 R10698
R1002
TP100
TP5205
L1002
TP5206
TP5207
TP5208
TP5209
C1010
TP5210
R1057
TP5211
TP1003
R1035
TP1020
TP1001
R1056
R1058
TP1004
R1059
28
TP1005
TP1008R1060
R1063
TP1007
TP1006 R1062
TP1042
R1061
TP1009
R1064
C1008
5
27
IC1101
7
C1109
2
8
8
7
1
2
C2506
C2502
2
R1114
L2501
12
44
E
TP1904
TP1905
TP1906 TP1907
C2507
ZF5
D2501
1
TP17
TP18
R2505
CN2501
TP1902
11
C2504
7
TP1901
C1901
1
R2506
CN2001
R2503
TP1903
TP2507
1
7
8
TP2508
32
1
8
7
8 R1051
1
R1115
2
7
22
IC2501
C2503
2
C1201
8
1
C1208
2
C1206
C1204
8
7
23
R2501
R1205
1
C1101
C2505
8
C2501
7
C1203
R3014
L2101
R1203
L1101
1 R10447 R1042 7 34
1
27
C3256
TP3252
R3256
TP2010
C3005
1
C1209
R3260
R3257
R1207
R3258
R3261
1
L1201
IC3251
R3264
R3259
C1103
33
C2508
IC1201
R3268
2
1
C3206
51
TP3251
C3253
TP1035 TP1036
7
9
C3208
8 2
2
D
1 C1102
54
TP1023 TP1039 TP1018
2
28
TP1019 TP1022
R1046
R1206
TP1038 TP1061
TP1062
R1070
2
R1081 8
TP1065
8
TP1066
1
R1208
2
R1204
7
R1202
C1202
8
C1205
R1075
C3205
R1053
7
2
8
1 R1049 7
54
1
C1207
R1055
R3262
R3263
8 TP1011 7
7
R1116
1 R1410 16
7 1
TP1015 2
TP1010
TP1014 1
1
8
7
2
1
1 7
R1117
17
C1106
C1107
R1050
C1111
R1105
R1121
C1110
C3207
1
TP23
2 1
TP1046
TP1048
R1078
TP1047
1
R1079
C1007
5
TP21
8
7 TP1049
C1009
07
TP27
TP1044 8 2 8 2
R1072 R1026
TP1043
1
TP1034
12
6
R5143
1
7 1 7
TP1045
R1016
C1512
C1501
C1502
C1503
8
TP1063
7
C1504
1
C1505
NIN15
R1307
2
TP1064
7
8
C1506
1
R1308
2
C1306
8
C1308
2
R1302
R1312
R1311
C1311
7
R1309
7
1
C1312
1
8
C1507
7
R1310
1
R5141
R1091
32
17
2
3
TP26
4 5
86
44
R1104
R1103
C1108
IC1104
R5142
IC1103
IC1301
C5108
TP25
43
1
C5116
1
C5109
16
TP5104
7
C5107 TP5105
7
8
C5117
7
2
1
C5115
TP5102
C5106
TP5101
C5114
C5131
1
R1303
C5135
8
C5134
C5133
1
7
R1304
2
C1303
8
C1304
2
C1305
1
R1305
C1307
8
C1309
2
C1310
C1302
R1306
TP16
TP19
CN2001
F
(VNP1960-C)
D
C CN701
73
XV-DVR9H
5
6
7
8
1
2
3
4
Q8406
IC3901
IC2504
Q8407
IC8504
IC8402
Q8405
IC8506
IC8401
IC5502
IC5501
Q5503
IC8503
Q5502
Q2503
IC2503
Q5621
Q2011
IC8502
IC8501
IC8505
Q5622
IC8652
Q5624
Q5623
8
5
1
4
8
8
1
5
7
5
14
8
4
8
5
4
1
8
5
4
5
8
5
4
1
8
5
4
4
1
8
8
5
CN8901 CN5651
8
1
8
4
1
4
1
4
1
5
1
1
CN8902
4
1
R2512
5
CN8903
D8506
D8508
R2024
R2023
1
NP
30
100
100
30
1
81
R5604
80
R5575
R5576
CONTROL ASSY
AWU8202
AWU8204
NP
51
R5672
CN5501
I
CN152
F
G
74
XV-DVR9H
1
2
OPEN SIDE
Q2503
Q5502 R2537
C5532
Q5503
R2510
R974
16
R5626
R5624
R5598
R5574
R5599
L953
R5625
R5623
R5622
R5621
C2531
16
81
CN5501
1
Q5624
R5581
R5627
R5605
CN
1
Q5623
R5595
R5596
R5597
D2007
1
L5501
R5593
R5594
Q2011
R5573
R5671
R5583
R5584
R5589 R5585
R5590 R5586
R5591
R5587
R5592 R5588
D5621
Q5621
Q5622
50
R5580
R5572
R5555
R5556
R5557
R5558
R5559
R5560
R5561
R5562
R5563
R5564
R5565
R5566
R5567
R3906
R3902
R3904
R3901
R3905
R3903
Q5671
R5673
C3902
C5524
IC5501
50
R3912
R3910
R3908
L3901
R3907
R3909
R3911
R5674
C5671
R3918
R3920
R3922
R3917
R3919
R3921
R5675
CN5671
1 2
1
C3901
C5528
3
80
51
R5553
C5527
1
31
31
C5514
R5628
R5603
C5530
IC5502
55
44
R5543
R5578
C5672
D8504
D8502
C3924
X5502
C5529
C5502
R5535
R5525
R5526
R5527
R5532
STEST
C
KN5502
R981
R5544
R5545
R5546
R5548
R5549
R5550
D5514
R5551
R5552
C8659
R5601
R5602
X5501
R3940
R8659
R8660
R5534
R5521
R5522
R5523
R5524
R5515
R5517
R5528
R5529
R5530
C3904
C3903
R5533
R5541 R5537
R5542 R5538
R5539
D8521
D8523
D3902
R5501
R5502
R5506
R5507
R5510
R5511
D8519
D8517
C3932
R3944
R3942
11
R5568
R5547
E
C8529
R3927
R3928
1919
C5513
R3924
C8651
C8657
7
C5516
R3923
C8658
C8652 C8660 IC8652
C3918
C3917
L5652
D
C2514
R2514
88
1
Q8321
C2513
C3916
C3914
R3925 C3912
R3926 R3932
D8503
D8505
D8501 D8507
4
C8505
1
IC2503
C2512
C2521
C3931
C8506
5
C8531
8
D8511
IC3902
R5655
C5651
R5654
C3906
R2544
R2543
C8351
CN8903
1
OPEN SIDE
C8359
C8360
1
Q5653
C2522
IC3901
14
IC8505
C2511 R2513
C2525
7 R3943
R3941
1
R3931
C3911
C3915
C3913
R8361
R8359
C3905
C2523
D8509
8
C2526
C8361
C8507
IC2504
R8337
C8352
IC8303
C8905
C8508
D8520
D8518
1919
14
C8530
D8522
D8524
C2524
R8341
C8539
IC8501
D8513
D8515
C8517
C8532
R2527
C8362
R2528
C8340
C8339
C8332 C8331
C8341
D5511
D5512
D5513
IC8503
C8519
C8518
C8311
C8342
IC8506
IC8302
C8537
D8512 D8514
D8510 D8516
C8520
C8312
CN8902
1
C8313
R8340
R8338
R8342
R8339 R8358
C5655
R8413
R8419 R8417
R8418
R8420 R8414
IC8504
R8416 R8412
C8314
C8901
C8407
IC8301
R8411
C8541
R8532
IC8502
C8538
R8415
C8309
R4608
C8906
C5656
IC8401
C8408
7
CN5506
R8531
C8403
IC8402
C4608
13 13
1
C4605
R5656
R8423
R8424
Q8405
Q8407
Q8404
CN8901
1
L4601
C8902
D5652
CN8011
R8427
R8428 R8426
C8402
C8310
8
1
OPEN SIDE
Q5652
H
T
OUT
IC4601
C8903
R5651
C
C4611
JA4602
Q8406
1
OPEN SIDE
R4611
C4606
C8904
CN8007
C4604
R
IN1
14
14
C5657
H
JA4601
R
CN5651
CN8003
1 2
H
B
1
Fan Motor
C4615
JA4603
IN2
R5614
R5615
R5616
R8318
R8317
5
IC4601
IC8302
IC8303
IC3902
IC8301
C5534
8
Q8321
Q8404
T
4
R
1
R
16
G CONTROL ASSY
11
A
10
SIDE A
1
Q5652
Q5653
Q5671
4.5 CONTROL ASSY
3
4
CN
DRI
8
SIDE A
IC901
IC805
IC802
IC2001
Q905
Q904
IC2002
Q2003
Q2004
Q2002
IC6001
Q2001
Q901
IC5901
7
Q806
Q5901
IC801
Q2502
Q803
Q2501
IC804
Q2504
Q801
Q805
IC2501
6
IC5701
IC2502
IC803
IC8505
Q5622
IC8652
Q5624
Q5623
5
A
2
KN2501
4
C904
2
7
C906
2
7
1
19
19
R845
IC6001
1
3
C6010
1
1
CN5504
R931
R930
5
8
B
8
1
8
8
19
19
0 1 2 3 4 5 6 7 8 9
-
1
1
9 9
2323
L
D
B
CN361
1
1
1
1
7
8
8
9
R2001
C2001
C2011
R
FR4 P
OPEN SIDE
R5626
R5624
R2002
R2010
R2009
C2007
B
A
B
C
7
1
1 1
-
+
1
R974
16
16
+
CN5503
1
1
0
CN5503
OPEN SIDE
R5913
CN805
CONTACT SIDE
0
BUTTERY BT801
SOCKET ST801
R826
R832
L953
Q5624
CN5507
0 1 2 3
CN804
C808
R831
Q5623
CONTACT SIDE
CN807
CN803
1
8
CN5501
L5501
1
CN471
C6007
R929
CN802
1 2
CN5504
2323
2
C824
R949
LF
1
1
R5598
R5574
R5599
C
CN804
4
1
11
3
C844
R948 D902 R947 D901
Q803
KN801
R5632
CN5505
1
11
11 1
X802
C
B2
E2
C845
D803
44
5
Q901
Q806
11
8
PRODUCTION CODE
R928
E
B
C2
D805
D806
4
R5625
R5623
R5622
R5621
31
IC802
8 5
4
4
C843
D804
R872
R863
R873
R869
R848
R866
R867
R918
5
IC901
1
1
R886
C955
C816
C835
R846
C812
R917
IC804
8
5
4
C840
C841
R875
R896
R880
R881
R882
C836
11
R839 R842
R840 R843
R841 R844
FC
C5529
C811
C815
C803
R825
IC803
ICT
R8659
R8660
R6002
R6001
R861
59
59
C809
C810
Q801
R862
C821
659
CONTACT SIDE
CN5505
CONTACT SIDE
IC801
87
87
Q805
C820
FM/AM
TUNER Unit
C911
R864
R865
R849
R850
R851
R853
R854
R855
R856
C819
B
L950
C6012
R887
R884
R877
R878
C826
R888
R889
58
58
R857
R858
R859
C842
L801
R836
C814
C817
R860
L802
C8657
R899
R900
R902
R904
29
29
30
30
R827
R828
C6001
C6002
C6003
C6004
R876
R883
88
88
X801
X803
R2512
C8658
IC8652
R942
C5902
R890
R868
R818
R819
8
D993
R813
C2514
3
0
C2520
1
1
D8521
D8523
2513
Q904
Q5901
R891
C831 R892
R897
R898
C832
R906
X950
D8519
D8517
R946
R808
R809
R810
R811
R814
R815
C910
116
116
R823
R822
C8529
R801
R802
R803
R804
R805
R806
R807
R940
R941
5
JA901
1
IC5901
C2508
D8503
D8505
D8501 D8507
C8505
05
8
8
R5908
5
11
8
C2506
4
9
C2507
D8506
D8508
C8539
C2519
IC2501
IC2502
16
L5901 6
C5909 D5905
R5907
D5902
5
L5903
D5904
R5906
JA59011
11
C8506
D8504
D8502
C2505
6
Q2502
Q905
CN8904
532
R2508
R2507
R908
R909
R921
R922
R923
R924
R925
R926
C2503
R2536
R927
R2535
C2504
Q2504
C8541
R2520
C903
C905
3
4
R939
JA2501
3
4
1
Q2501
CN5506
8531
5
C5904
3
Lithium
Battery
L
CN806
1
11
11
CONTACT SIDE
24
24
SYSTEM u-con TX-FL-con
DOWN LOAD DOWN LOAD
L952
CN805
R979
CN801
R973
CN5507
8
7
C2004
A
CN152
DRIVE Assy
R7
KN5501
I
IC805
4
R2011
14
14
1
Q2003 Q2001
1
15
15
1
R2008
CN802
C837
1
5
IC2002
R2013
R2007
8
C2009
CN5501
E
R910
R915
R911
R916
R912
R919
C2003
R2017
R2018
OPEN SIDE
C2010
CONTACT SIDE
CN5502
C2002
CN801
1
Q2004 Q2002
C2012
C2008
R2012
R2014
AWU8205
AWU8207
AWU8208
AWU8210
16
IC2001
CN803
ASSY
02
04
D
CN3001
F
CN5502
J
G
(ANP7510-C)
CN5802
75
XV-DVR9H
5
6
7
8
1
2
3
4
XV-DVR9H
76
G
2.GND
3.ASCKSYS
4.GND
5.HST_TO_M
6.GND
7.SST_TO_M
8.GND
9.SSM_TO_TSYS
10.DISCHARGE
11.HSM_TO_TSYS
12.GND
13.PCMOUT
14.GND
15.MRST
16.RAMUTE
17.X525P
18.LAMUTE
19.XRST
20.MUTE
21.V+5VI
22.BUP
23.VS+13
24.GND
1.SPDIF
F
CN5502
CN805
CN5507
CN801
24
1.LED DIM
2.VES+5
3.KEY2
4.IR
5.LEDAMB
6.VS+13
7.KEY1
8.VE+5
9.LEDBLUE
10.GNDLED
11.GNDD
12.FLCLK
13.FLDATA
14.XFLCS
15.XFLRST
C961
1
1
15
CN802
CN55
R978
R2022
0
1
0 1 2 3 4 5 6 7 8 9
FR4 P
R
R8661
R2019
Q2010
R2020
R2006
R2015
R2005
R2016
R2021
D2002
Q2009
R2004
C2006
A
B
C
13.HPL
14.GNDHP
15.HPR
16.HPDET
17.RECMUTE
7.NC
6.VSS
5.VCC
4.RST
3.WCLK
2.WD0
1.WEN/DI
C2005
R2003
Q5504 Q5501
16
R980
16.VE+37
15.GNDTV
14.PO ON1
1
9
1.GND
2.PCMOUT
1
R8657
R871
R852
1.AGC
2.SCL
3.AFT
D992
D995
D991
R834
R835
R837
C802
R824
4.SDA
5.TUON
6.GNDTV
18.VSA+12
7.GNDTV
19.VSA-12
8.VE+76
20.VI+5
9.GNDTV
21.VS+13
10.VE+37
22.GNDTV
11.GNDTV
23.UVOUT
12.JUST(P SAVES)
13.NC(LM/)
1.EVOLCE
14.NC(LDASH)[
2.EVOLDATA
15.GNDTV
3.EVOLCLK
16.UVOUT
4.SDA
17.GNDTV
5.SCL
18.MUTE
6.SWSTBY
19.MIONTA
7.SYNC
8.SYNCAFT
9.TEXTV
10.SDET2
11.AOUTMUTE
12.SDET1
1.FOMOI
13.SDET3/MUTEMASK1
2.SD/STID
14.S1/MUTEMASK2
3.GNDTV
15.X525P
4.UV
LIN
16.AVLIN
5.GNDTV
C6011
17.AVLOUT
6.UV
RIN
18.XPSAVE
7.GNDTV
19.FUNC
8.SU/SAPID
20.XTHROU
9.DCTRI
21.BLANKIN
10.VT+9
22.EXTRGB
11.STBYQ
23.CSTBY
12.VS+6
13.XRESET
14.GNDD
D990
D994
15.RDSDATA
16.RDSCLK
17.RDSPOW
18.VD+5
19.RDS
CN5504
R914
R913
C838
C839
CN804
13.FL ON
12.BEAT CUT
11.VSA+12
10.VA+5
9.VS+6
8.VT+9
7.VD+5
6.GNDD
5.VE+76
4.SWVION
3.VE+33
2.VE+56
1.DGRTN
Q804
Q802
Q807
R874
C825
R901
C818
R833
R8658
Q808
C830
R870
C823
C813
R847
C822
R977
C829
R2025
R6004
C8535
C907
C909
R975
R976
C912
Q951
IC950
R920
R6008
11.GNDX
10.FMDET
9.VSM
8.TXR
7.VX+9
6.TXL
5.GND
4.DO
3.CLK
2.DI
1.CE
R6007
Q952
R969
C6005
1.GNDRY
2.VRY+5
3.XMUTEC
4.RYFCONT
5.RYRCONT
6.GNDD
7.GNDD
8.GNDD
9.XSWDET
10.VOLDATA
11.DSPMUTE
12.VOLCLK
13.XSYSMUTE
14.XSWPOWDET
15.XPROTECT
16.SWPOW
R2531
Q911
R945
R2506
1.SWN
2.FLN
3.FLP
4.FRP
5.SWP
6.FRN
7.CP
8.SRN
9.SRP
10.SLN
11.CN
12.SLP
R2505
C5901
C5907 R5902
L5905
R5903
R964
C956
R963
R960
R952
R956
R955
R961 R957
R959 C953
C952
R962
R965
R954
C807
C804
R6006
R8923
R2511
C902
R938
L5902
D5903
C2501
C901
R935
Q902
Q903
R2502
D801
D802
R958
R830
C954 R950
R829
C950 C951
R951
R937
C5903 C5906
L2502
C5908
C2502
C805
Q950
C6009
C6008
R6003
R6005
C6006
C5905 D5901
L5904 R5901
R953
Q6001
R2504
R2521
R2501
R8922
R8921
R8916
R8915
R8914
R8913
R8912
R8911
1
CN5505
C833
R905
R907
R971
R972
C960
R2522
R2524
R2503
L2501
R2523
C828
C827
R879
R966
R893 R967
R895
R894
C834
R970
5
C806
R812
R817 R968
R816 L951 C957
R903
R821
R820
C801
R838
C908
8
4
C959
R8920
R8919
R8918
R8917
D5507
D5510
D5505
CN5503
D807
23
C958
12
D2001
1.GND
2.XDLRST
3.BUSY
4.SCLK
5.RXD
6.VPP
7.TXD
8.PGM
9.VE+56
1
1
23
11
11
1
R944
1
CN803
7
1
19
1
19
R936
R934
R933
R932
Q5501
Q5504
3
Q804
Q808
Q802
Q807
Q911
IC950
Q2010
Q951
Q6001
Q2009
Q903
Q952
Q950
Q902
2
0 1 2 3
R5662
D5521
R5661
1
1.TVL
2.GNDA
3.TVR
4.GNDA
5.LOUTL
6.GNDA
7.LOUTR
8.GNDA
9.AINL
10.GNDA
11.AINR
12.GNDA
E
D
C
B
R2545
G CONTROL ASSY
A
SIDE B
1
4
5
6
7
8
XV-DVR9H
77
G
F
CN5501
(ANP7510-C)
D5671
0
0
1
1
2
3
4
5
6
7
8
9
Q3903 R3916
R3915
2
3
4
5
6
7
8
9
Q3904
2
3
4
5
6
7
8
9
R3914
R3913
7 0 0 0 -A
8 1 1 1
AWU
Q5671
Q3902
0 1 2 3 4 5 6 7 8 9
Q3901
0 1 2 3
C3925
D2005
CN802
E
Q2007
Q2005
R5620
A
B
C
R5629
R5536
R5540
R5570
Q2008
D2003
R5619
R5618
R5505
C5515
C5519
C5518
Q2006
R5503
C5531
STEST
UTEST
R5512
R5518
16.V
15.G
R5504
13.F
12.BE
11.V
10.V
9.VS
8.VT
7.V
6.G
R5508
R5653
R3951
1
Q3907
R3949
Q5651
19
R8321
R3930
R8322
C3910
C8655
R8655
C5653
C3907
C8913
1
R8903
Q5652
19
C8914
1
C8910
R8902
C8909
R8904
C8912
R8348
C8524
R8509
R8505
C8511
C8915
C4607
L4604
R4610
R4609
L4602
CN8901 CN5651
13
R8310
R8308
C8304
C8302
C8522
C8501
C8509
R8507
R8506 R8510 C8512
7.CP
8.SRN
9.SRP
10.SLN
11.CN
12.SLP
R8504
R8502
C8504
11.DSPMUTE
12.VOLCLK
13.XSYSMUTE
14.XSWPOWDET
15.XPROTECT
16.SWPOW
C8503 R8503
R8501
C8521
C8533
C8516
R8343 R8344
C8333 C8334 R8309
R8333 R8334 R8307
R8332 C8303
R8331
C8301
C8534
R8520
CN8902
C8911
R8522
R2530
R2541
C8536
R8530
C8523
R8519
R2515
C2510
R2525
R8368 R8347
C2509
R2542
R2529
R8656
C8656
R2526
R8367
R8363
C8353
C8357
R8355
R3933
C2515
C2516
C2517
R2516
C3920
R8652
CN8903
C3919
C3908
D8302
D8301
R3934
R2517
R8651
R2518
R3948
D3903
C8653
R8653
R8654
C8654
R8521
C8527 R8525
C8525
C8535
R8517
R8527
R8529
C8513
R8516
R8658
R8515
R8511
C8515
R8528
R8657
R2534 R2533
R8526
C8528
C8526
R8512
R8518
R8421
C8409
C8410
R8422
C8412
C8502 R8508 C8510
R8905
1
R5606
R5607
R5608
R5611
R5613
R5609
16
D5508
R5612
R4612
R4601
R8919
R8918
R8917
D5507
D5510
D5505
R4604 L4603
D5502
D5503
D5504
C4610
C4602
11
D5506
R4606
C5533
C4609
4.SW
3.V
2
1.D
C5525
C5504
R5631
R5630
C5503
R3950
R8356
C8337
C8335
C8336
C8338
R8336
R8301 R8305
C8307
C8514
R4602
R980
D807
C5526
R5600
R5516
C5522
R5582
C5520
C5501
R5579
R5509
R5513
R5514
R5531
R2519
R8353
R8352
R8335
16
R5663
C5521
C5523
C5511
C5509
C5510
C5508
R5520
C5505
C5507 C5506
C5512
19.MUTE_OUT
18.MUTE
17.MODC
16.DECMUTE
15.DSPDI
14.DSPDO
13.DSPCK
12.DSPRST
11.DSPSS
10.BUSY
9.DSPHREQ
8.DSPMODE
7.DIRDO
6.DIRCS
19.SBLO
1.GND
L5651
C5652
R5617
R3939
D3901
R3952
R3929
C3909
R8357 C8355
R8351
R2532
D5653
18.GNDA
17.SBRO
16.GNDA
15.C
14.GNDA
13.SW
12.GNDA
11.SL
10.GNDA
9.SR
8.RECMUTE
7.FL
6.VCOMG
5.FR
4.GNDA
3.LIN
2.GNDA
1.RIN
R8302
C8411
C4601
C4613
C4614
2.PCMOUT
5.DIRRST
4.DIRERR
3.XTLO
2.LSSN
1.GNDD
D5654
C
C5654
R8901
R8306
C8308
R8425
R4603
C4612
R4607
C4603
Q5504 Q5501
R5554
C5517
R5571
R5569
R5519
D
13.GNDD
12.VA+5
11.GNDA
10.GNDA
9.VD+5
8.VD+5
7.GNDD
6.GNDD
5.OPTIN
4.DGRTN
3.OPTIN
2.UGRTN
1.OPTOUT
10
1
R5610
R943
B
A
Q5651
Q3903
Q3901
Q3902
Q3904
Q2006
Q2005
Q2008
Q2007
Q3907
Q5501
Q5504
5
6
SIDE B
7
8
IC8701
IC8401 Q8501
IC8501
IC8601
IC8301
17 IC8603
32
IC8603
Q8504
4
I
R8606
7
C8610
C8613
C8609
C8554
C8550
C8551
R8601
L8601
IC8702
FC ICT
H C T-163
94V-0
C8547
C8602
C8601
R8530
CN8015
CN8016
C8604
C8603
IC8601
R8605
L8603
16
KN8501
7
IC8201
1
IC8502
I
R8608
C8528
C8530
109
F
17
R8332
R8333
R8336
R8346
R8337
R8810
R8805
R8556
R8557
C8511
R8514
R8513
R8512
R8511
G IC8501
IC8502
C8549
R8550
R8531
C8522
1
C8513 CN8018
C8512
R8554
CN8012
CN8013 CN8014 IC8701
G CN8903
CN8011
G
H
F
C8422
19 C8415
R8543
L8402
23
IC8401
IC8301
R8406
1 R8345
G CN8902
CN8007
CN8007 CN8009
CN8008 CN8010
33
C8407
C8423
R8405
E
C8706 C8705
IC8702
Q8504
6
Q8341
6
1
22
22
CN8019
R8703
11
R8335
E R8329 R8704
R8330
R8331 R8701
R8702
C8301
C8302
R8519
C8701
R8506
C8504
C8509
C8507
JTAG
144
144
C8523 C8515
Q8501
CN8011
R8803
R8804
H
C8541
C8525
C8524
19
1
C8527
C8526
C8533
C8537
C8536
L8504
C8532
5
8 5
8
4
1
1
C8503
R8502
R8501
R8503
C8543
17
R8802
R8524
R8552
R8553
R8539
C8545
R8533
R8534
11
R8551
36
J
R8413
R8521
R8522
C8703
C8418
C8420
R8339
X8501
R8412 R8416 C8421 C8419
R8328
44
D8401
C
C8704
D
L8203
IC8201
C8226
R8229
R8231
C8222
D
CN8017
10
C8406
R8207
G CN8901
CN8003
9
C
R8110
C8107
R8107
R8102
C8218
R8226
C8108
R8103
C8113
R8111
R8109
C8112
R8705
R8707
R8706
R8708
CN8001 CN8004
CN8002 CN8005
CN8003 CN8006
B
A
C8901
R8213
R8214
R8215
R8209
R8225
13
X8201
R8204
25
36
36
R8203
C8209 R8210
L8201
C8210
A
B
1
R8017
C8408
34
C8404
C8212
R8230
C8221
48
37 C8201
C8225
R8211
R8223
C8213
R8216
L8202
R8404
L8301
R8414
C8202
C8516
11
J C8548 R8540 R8541
R8411
C8217
L8702
R8410
R8206 R8205
D8501
R8409
R8408
C8904
C8223
R8232
R8227
C8219
R8222
R8016
1 C8505
1
23
Q8341
R8219 L8205
C8546
20
20
44
3
15 15
10
108
L8204
C8215
C8214
22
1
12
10
2
8
22
78
8
15
11
9
C8702
1
KN8201
KN8102
3
99
10
1
73
9
1
1
16
11
H
11
24
1
1
72
F
20
37
E
12
D
13
C8405
1
C
KN8101
2
JA8101
JA8103
B
JA8102
SIDE A
C8105
A
C8001 C8902
R8009
C8002 R8010
R8015 C8004
C8003
1
3
4
4.6 DSP ASSY
H DSP ASSY
SIDE A
1
2
(ANP2022-B)
XV-DVR9H
H
4
5
6
7
8
SIDE B
SIDE B
A
H DSP ASSY
C8006
R8019
C8204
R8202
GND
13 15
R8234
C8224
R8220
R8212
Q8503
R8538
C8008 C8216
R8334
L8505
C8553
C8552
D8503
IC8503
8
R8558
4
5
R8340
19
R8341
D8301
D8302
R8343
R8344
R8321
R8320
R8544
R8542
R8536
C
R8547
R8548
R8549
1
C8007
GNDD
15
L8501
R8546
R8545
R8322
R8308
L8701
C8555
R8808
R8505
C
R8809
L8801
R8504
R8555
C8544
R8518
R8517
R8516
R8515
C8542
V11
C8540
GNDD
C8514
R8523
R8309
C8520
R8310
C8521
R8311
C8518
R8528
R8312
R8313
R8314
R8326
R8529
C8539
C8538
C8529
6
C8534
C8535
17
C8606
C8605
E
C8014
C8013
C8608
C8607
1
32
AWX8240
AWX8251
AWX8252
AWX
7
AWX8241
IC8602
1
R8602
R8537
L8502
AWX1082
AWX1083
C8531
AWX8250
19
R8603
L8602
R8801
R8812
R8811
R8813
D
V3
17
PRODUCTION CODE
R8507
R8508
R8509
R8510
R8526
C8517
R8527
R8520
16
1
CN8011
R8221
R8338
GNDD
C8401
C8009
C8417
C8501
C8502
R8532
R8018
R8114
C8010
C8402
C8403
R8415
R8417
R8806
R8807
R8115
R8113
C
CN8011
C8011
C8205
C8206
C8207
D8502
D8402
C8208
C8203
R8233
R8201
C8211
GDAC
1
CN8007
IC8101
R8401
R8402
R8403
C8903
R8006
L8401
B
C8012
R8224
R8407
CN8007
R8104
R8105
R8116
D8303
OUT
IN
CN8003
GNDD
8
B
L8004
R8004
9
C8409
C8410
C8411
C8412
C8413
C8414
C8416
8
7
IN
GND
OUT
C8220
R8228
L8002
R8002
L8003
R8003
L8104
R8112
L8103
14
IC8901
14
C8005
R8011
C8115
C8110
C8109
IC8902
R8001
L8001
L8102
C8114
1
A
1
CN8003
C8111
R8108
A
R8014
R8013
R8012
GCH
R8007
R8008
B
R8005
L8005
C8106
R8106
L8101
C8104
AWX8253
AWX8254
IC8602
AWX8255
IC8503
IC8101 Q8503
AWX8239
IC8902
IC8901
H
(ANP2022-B)
F
H
79
XV-DVR9H
5
6
7
8
Q158
R158
R157
CN153
4
6
IC153
Q157
VE+56
CN152
3
3
C159
C161
C152
C151
IN
C169
C173
C164
C168
C182
Q151
C178
C183
Q156
Q155
R161
R156
C174
D154
C179
C172
R155
Q153
R154
C163
R153
R160
C165
D153
D152
VFDP
FLDC+
VS+6
15.VE+6
GNDD
VE+76
STBY
VS+13
10.GNDREG
VSA+12
GNDA
VSA-12
GNDAV
5.BEAT CUT
FL ON
PO ON1
GNDTV
1.VE+37
FLDC-
GNDFL
20.GNDFL
E
B
C2
D151
C
B2
E2
E
VE+76
W202
VE+76
W249
VE+76
W205 VE+6
VA+5
10
W209
W210
GNDFL
20.GNDFL
FLDCVFDP
FLDC+
VS+6
15.VE+6
GNDD
VE+76
STBY
VS+13
10.GNDREG
VSA+12
GNDA
VSA-12
GNDAV
5.BEAT CUT
FL ON
PO ON1
GNDTV
1.VE+37
VS+13
VAV+12
VE+76
W246
VSA+12
C180
C185
C176
C166
W224
C170
C171
H
W239
W230
GNDA
W233 DGRTN
W241
W232 GNDD
VD+5
C186
W247
CN152
W238
GNDD
G
CN153
C CN702
DGRTN
VE+56
VE+33
SWION
5.VE+76
GNDD
VD+5
VT+9
VS+6
VA+5
VSA+12
B CUT
FL ON
PO ON1
GNDTV
GNDA
VD+5
W248
CN151
1.VO+5
VI+5
GNDD
VAV+9
5.VS+13
XV-DVR9H
4
CN152
STBY
VSA+12
VS+13 W240
VAV+9
W231 GNDD
W234
VA+5
W245
VT+9
W237
C162
SWION
VO+5
W229
W228
W227
W226
W225
W236 GNDD
C157
GNDAV
VI+5
VE+56
R
CMKM-P3X
C158
AWU8225
C187
W244
VSA-12
OPEN SIDE
C181
C177
C154
C153
Q152
W217
W214
L152
W211
L151
REG ASSY
C188
W204
VE+6
VE+76
W203
W213
W201
W212
F
3
CN152
VD+5
IC152
C160
IC159
VT+9
1
VE+33
OUT
IN
VS+6
R152
OUT
1
SWION
OUT
IN
OUT
R151
IC155
OUT
IN
REG ASSY
CN151
AWU8225
CN151
4
6
1
DGRTN
IC154
5
VE+76
OPEN SIDE
R162 R163
R164 R165
IC156
GNDD
VSA+12
3
GNDA
CN153
VSA+12
CN151
B CUT
20
15
CN154
21
1
4
20
FL ON
W208
15
OPEN SIDE
4
1
21 1
GNDAV
I
10 10
CN154
W207
P ON1
O CN5105
5
CN154
GNDD W219
GNDTV
1
21
1
10
1 2
10
VE+37
PO ON1
20
GNDD W206 GNDD
VSA-12
2
Contact side
10.CSTBY
80
CN151
GNDAV W220
16
F
STBY
W216
10
REG ASSY
C175
1
CN154
GNDAV
16
W215
10
OUT
IC151
IN
SIDE A
1
4
1.GNDFL
FLDC-
E
C167
D
VFDP
FLDC+
C155
C156
1
IN
1.GNDFL
I
FLDC-
LF
VFDP
SIDE B
FLDC+
C
W235
C184
Q152
GNDD
GNDAV
IC151
UPSIDE
PRINTED SIDE
10
PRODUCTION CODE
1.VO+5
VI+5
GNDD
VAV+9
5.VS+13
GNDAV
VSA+12
GNDA
VSA-12
10.CSTBY
W250
KN101
B
REG ASSY
1
I
W243
A
2
1 2
1
4
4.7 REG ASSY
SIDE A
CN153
(ANP7514-B)
G
W218
VE+37
CN5501
CN151
21 21 1
(ANP7514-B)
Q CN202
SIDE B
Q153
IC155
Q155
Q151
Q156
IC159
IC156
IC154
IC152
IC153
Q157
Q158
I
64
D5802
C5804
C5803
40
1 1
16
45
16
50
33
35
48
48
30
25
C5807
C5805
C5806
C5809
49
C5811
R5808
C5810
C5808
R5802
1. FLDC+
VFDP
FLDCIR
GNDD
KEY2
KEY1
GNDFL
9. VE+5
CN5801
7
7
33
64
C5813
AWU
C5815
C5817
C5819
0 -A
1
2
3
4
5
6
7
8
9
32
R5805
R5806
R5801
R5803
EL FR4 P
20
15
DISPLAY ASS'Y
Q5801
2. VES+5
IR
VS+13
VE+5
GNDLED
FLCLK
XFLCS
R5804
R5807
R5864 R5861
Q5852 D5852
R5856
Q5851 D5851
R5859 R5854
R5862 R5863
R5852
R
LF
10
5
3
GNDD
LED
BLUE
KEY2
LED
AMB
KEY1
DIMMER
CN5802
R5851
Q5854
49
53
XTPA
XTPA
GND
XTPB
0
1
2
3
4
5
6
7
8
9
IC
58
01
70
81
2
3
4
5
6
7
8
9
17
C5816
C5812
C5814
17
CN5001
TPA
GND
TPB
1
D5801
C5802
C5801
1
1
LED3
1 VS+13
FLDATA
XFLRST
J K
J K
81
XV-DVR9H
E
1 C5818
32
1
1
UPPER SIDE
3 13
CN5001
CN5801
1 1
3
9 UPPER SIDE
1
9
3
1
L AMB
1.VS+13
L BLE
LED2
CN5851
1
3
C5822
1
R
(ANP7514-B)
CN5861
EL FR4 P
SIDE B
SIDE B
B
L5802
C
D5862
CN5861
3
1
9
8
7
A
C5823
C5820
CONTACT
SIDE
D
K LED ASSY
CN5861
CN5801
CN5802
F
CN5801 (ANP7512-B)
CN5802
CN5001
DISPLAY ASSY
SIDE
CONTACT
3 1
JA5001
7
CN5851
SIDE A
SIDE A
C5821
B
CN5851
L5801
KN5851
AWU
LF
2
4
3
1
15
AWU8216
3
IC5801
DISPLAY ASSY
1 1
Q5801
Q5854
Q5851
Q5852
6
5
W145
LF
1.VS+13
LBLE
LAMB
Contact
side
J
(ANP7514-B)
D CN5102
K LED ASSY
LED ASSY
AWU8223
P CN5101
J CN5502
53
53
51
33
11
A
DISPLAY ASSY
J
8
7
6
5
4.8 DISPLAY and LED ASSYS
V5801
CN5001
(ANP7512-B)
15
15
CN5802
D5861
CMKM-P3X
LED ASSY
C5861
AWU8223
CN5851
C5302
C5301
82
2
1
4
C
C5208
3
CN5201
5
2
CN5201
6
CN5201
R
17
1
CONTACT SIDE
UPPER SIDE
1
1
17
W109
W110
W112
GNDAV
W125
W113 GNDAV
CMKM-P3X
FRONT JACK ASSY
17 17
O
W124 GNDAV
W138
AWU8226
R5205
6
R5216
7
C5826
R5212
R5204 R5215
JA5202
C5207
2
R5211
JA5201
C5825
3
R5209
7
C5824
R5201
C5201
4
C5202
R5203
Q
W141
KN5201
11
C5205
C5304
6
R5202
R5206
C5203
C5204
R5207
R5208
C5307
KN5301
GNDHP
AWU8226
C5306
JA5301
FRONT JACK ASSY
R5301
5
C5305
L5301
L5303
L5302
C5303
P
2
SDET2
GNDAV
L
GNDAV
10.R
GNDAV
V
GNDAV
Y
15.GNDAV
C
GNDAV
1
2
4
R5210
3
1
W137
W140
GNDAV
B
W123
7
6
E
W142 GNDAV
ICT
W116
LF
W111
1
3
4
4.9 FRONT JACK ASSY
A
SIDE A
SIDE A
M FRONT JACK ASSY
FC
SIDE B
M
XV-DVR9H
4
CN703
C
5
3
1
(ANP7514-B)
SIDE B
D
M FRONT JACK ASSY
1.HPDET
HPR
GNDHP
HPL
5.GNDAV
(ANP7514-B)
F
M
5
6
7
8
4.10 IR, KEY L and KEY R ASSYS
SIDE A
SIDE A
A
O KEY L ASSY
J5104
KEYL ASSY
AWU8221
3
1
8
1
8 J5103
W121
N
J5104
1.GNDD
KEY1
FLDC+
FLDC5.IR
VE+5
VFDP
GNDFL
1.GNDFL
FLDCVFDP
FLDC+
IR ASSY
J5105
IR ASSY
AWU8227
PLAY STOP
B
J
5
PLAY
5
VOL+
4
S5109
S5110
S5111
VOL-
3
S5108
K
4
1
S5107
R
3
1
POWER
LF
J5105
2
4
CMKM-P3X
R
1
(ANP7514-B)
X5151
C5152
CMKM-P3X
3
4
1
OPEN SIDE
1
1.GNDD
IR
VE+5
1.GNDD
IR
VE+5
W108
LF
1
1 2
CN5105
J5103
1
CN5105
I
I CN154
(ANP7514-B)
J CN5801
KEY R ASSY
J5102
CN5101
8
8
J5102
KEYR ASSY
AWU8222
1
Contact side
9.VE+5
GNDFL
KEY1
KEY2
5.GNDD
IR
FLDCVFDP
1.FLDC+
1
9 1
91
GNDD
W139
VFDP
W136
W135
LF
1.GNDD
KEY1
FLDC+
FLDC5.IR
VE+5
VFDP
GNDFL
W122
CN5101
P
REC STOP
REC
+
-
HDD/DVD
N
M
S5105
OPEN/CLOSE
S5101
R
S5104
S5103
S5102
S5106
CMKM-P3X
C
(ANP7514-B)
SIDE B
SIDE B
P
KEY R ASSY
REC
REC STOP
9.VE+5
GNDFL
KEY1
KEY2
5.GNDD
IR
FLDCVFDP
1.FLDC+
VFDP
VE+5
FLDC-
GNDFL
-
HDD/DVD
R5102
+
FLDC+
8
KEY1
5.IR
1
1.GNDD
9
9
KEYR ASSY
AWU8222
1
J5102
1
(ANP7514-B)
R5105
R5104
R5103
OPEN/CLOSE
D
CN5101
E
O KEY L ASSY
5
3
J5103
J5104
N O P
1
J5105
F
(ANP7514-B)
N O P
83
XV-DVR9H
5
IR ASSY
AWU8227
1.GNDD
IR
VE+5
1
1
CN5105
2
1.GNDD
IR
VE+5
8
1
3
R5152 R5151 C5151
1.GNDD
FLDC+
FLDC-
KEY1
VE+5
VFDP
5.IR
GNDFL
1.GNDFL
VFDP
FLDC+
FLDC-
1
4
R5153
R5107
PLAY STOP
R5111
PLAY
R5110
VOL+
R5109
VOL-
R5108
POWER
KEYL ASSY
AWU8221
3
4
N IR ASSY
(ANP7514-B)
6
7
8
1
2
3
4
4.11 ATWB and ATHB ASSYS
SIDE A
SIDE A
A
D CN4401
E
CN710
D CN4501
ATWB ASSY
F
40 40
CONTACT TOP SIDE
B
ATHB ASSY
CN708
11
CN710
40 40
ATWB ASSY
AWU8240
CONTACT TOP SIDE
ATHB ASSY
AWU8241
(WRITER)
11
11
40 40
R
R
40
40
CN709
EL FR4 P
(ANP7512-B)
CN709
LF
CN707
EL FR4 P
LF
11
CN708
(HDD)
(ANP7512-B)
CN707
C
R7 DRIVE ASSY
to HDD
SIDE B
SIDE B
D
E
F
ATWB ASSY
ATHB ASSY
CN709
CN707
40
40
1
1
(WRITER)
E
AWU8241
(HDD)
LF
(ANP7512-B)
EL FR4 P
AWU8240
R
ATWB ASSY
ATHB ASSY
(ANP7512-B)
EL FR4 P
R
LF
F
E F
E F
84
XV-DVR9H
1
2
3
4
5
6
7
8
5. PCB PARTS LIST
NOTES:
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
560 Ω
56 x 10 1
RD1/4PU 5 6 1 J
561
47k Ω
RD1/4PU 4 7 3 J
47 x 10 3
473
0.5 Ω
RN2H R 5 0 K
R50
1Ω
RS1P 1 R 0 K
1R0
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
5.62k Ω
562 x 10 1
5621
RN1/4PC 5 6 2 1 F
Mark No.
Description
Part No.
LIST OF ASSEMBLIES
>
1..DVD CONTROL ASSY
2..CONTROL ASSY
2..TV CONNECT ASSY
AWM7914
AWU8202
AWU8203
1..JACK ASSY
2..JACK ASSY
2..DISPLAY ASSY
2..TV MODULE ASSY
2..ATWB ASSY
2..ATHB ASSY
AWM7922
AWU8215
AWU8216
AWU8217
AWU8240
AWU8241
1..COMPLEX ASSY
2..KEY L ASSY
2..KEY R ASSY
2..LED ASSY
2..TRADE ASSY
2..REG ASSY
2..FRONT JACK ASSY
2..IR ASSY
AWM7924
AWU8221
AWU8222
AWU8223
AWU8224
AWU8225
AWU8226
AWU8227
1..DSP ASSY
AWX8486
1..MAIN ASSY
VWV2013
1..POWER SUPPLY UNIT
AWR7013
1..FM/AM TUNER UNIT
AXX7170
Mark No.
Description
Mark No.
Description
Part No.
L305
LCKAWR22J2520
L311,L314
L307
L309
F306 SAW FILTER
F305 SAW FILTER
LCKAWR47J2520
LCYA150J2520
LCYAR68J2520
VTF1177
VTF1179
F304 IF TRAP FILTER
F303 IF TRAP FILTER
F301 TRAP FILTER
L391,L392 CHIP BEADS
VTF1180
VTF1181
VTF1183
VTL1081
C
CAPACITORS
C333,C345
C339
C343
C315,C316
C325
CCSRCH150J50
CCSRCH220J50
CCSRCH270J50
CCSRCH330J50
CCSRCH7R0D50
C344
C301,C346
C319
C308
C303
CCSRUJ4R0C50
CEAT100M50
CEAT101M16
CEAT102M6R3
CEAT330M25
C313,C324
C336,C337
C332,C334,C335,C340,C341
C322,C323,C327
C329,C349
CEAT471M6R3
CKSQYB225K10
CKSRYB102K50
CKSRYB103K50
CKSRYB104K16
C304,C305,C328,C331
C338
C307,C326,C330
C311
CKSRYB222K50
CKSRYB224K10
CKSRYF104Z25
CKSRYF104Z50
Part No.
SEMICONDUCTORS
IC302
Q302,Q308,Q319
Q300,Q304,Q306,Q307
Q310,Q312
Q305,Q315
TDA9818TS
2SA1576A
2SC4081
2SC4082
DTA124EUA
RESISTORS
Q311
Q301
Q303,Q313
D300
D302
RN1903
RN4903
UMF21N
1SS355
1SS356
OTHERS
D301
UDZS33(B)
R399
R305
VR300 (10k)
Other Resistors
300 SCREW PLATE
U301 TV TUNER PACK
CN300 19P SOCKET
COILS AND FILTERS
ATH1109
ATL7011
CTF1399
LCKAW330J2520
6
E
RS1/10S0R0J
RS1/10S150J
VCP1156
RS1/16S###J
VNE1948
VXF1023
XKP3080
B TV CONNECT ASSY
F
SEMICONDUCTORS
> IC451
BA06FP
BU1924F
IC5701
85
XV-DVR9H
5
B
D
A TV MODULE ASSY
L304 RADIAL INDUCTOR
L315 VCO COIL
L301,L303,L306
L316
A
7
8
1
Mark No.
2
Description
3
Part No.
IC401
Q401,Q404-Q406
Q402,Q403
MSP3417G
2SA1576A
2SC4081
Q400
D400
2SD1664
1SS355
Mark No.
A
COILS AND FILTERS
L400
L402,L403
L404
L401
CTF1399
LCYA150J2520
LCYA4R7J2520
LCYA8R2J2520
CAPACITORS
B
C
D
C424
C431
C439,C440
C5709,C5710
C5712
CCSRCH121J50
CCSRCH181J50
CCSRCH220J50
CCSRCH270J50
CCSRCH271J50
C423
C426,C428
C5713
C427
C430
CCSRCH470J50
CCSRCH560J50
CCSRCH561J50
CCSRCH5R0C50
CCSRCH680J50
C432
C452,C453,C5711
C400,C401,C403,C406,C415
C5707
C416
CCSRCH6R0D50
CEAL100M50
CEAL101M16
CEAL470M16
CEAT100M50
C412,C417
C408
C410
C421,C433,C434,C442
C414,C435,C436,C5708
CEAT101M16
CEJQ100M50
CEJQ3R3M50
CKSRYB102K50
CKSRYB103K50
C402,C404,C405,C407,C409
C411,C413,C418,C422,C425
C429,C438
C419,C420
CKSRYB104K25
CKSRYB104K25
CKSRYB104K25
CKSRYB472K50
E
CN351 19P PLUG
XKP3069
SEMICONDUCTORS
F
IC601
IC206-IC208
IC702
LC75342M
MM1501XN
MM1504XN
86
Q785
Q503-Q505,Q508,Q513
Q783
Q204,Q509,Q514
Q201,Q506,Q512,Q782
2SC1740S
2SC4081
2SC4097
DTA124EUA
DTC124EUA
Q601,Q602
Q702
Q510,Q511
Q202
Q502,Q784
DTC643TU
HN1B04FU
HN1C03FU
RN2903
RN4903
D502-D511,D533,D581-D586
D782
D512,D514-D532,D704-D706
D501
D781
1SS355
1SS355
DF3A5.6FU
RB501V-40
UDZS12(B)
LAU220J
LAU2R2J
LCYA220J2520
VSR1017
CAPACITORS
C JACK ASSY
BA178M09FP
BA4558F-HT
LA7213
LA73026AV
LA73033M
TC7W53FU
TC7WH123FU
2SA1576A
2SA1576A
2SA1577
RY501
VSS1189
IC202
IC651
IC201
IC501
IC701
IC502,IC504
IC205
Q203,Q205-Q207,Q501
Q703,Q704,Q706,Q805
Q781
SWITCHES AND RELAYS
OTHERS
ASS7004
VKN1775
VNF1084
Part No.
MM1511XN
TA1287FG
L701,L702,L704
L703
L201
RS1/10S0R0J
RS1/10S100J
RS1LMF3R3J
RS1/16S###J
X400
CERAMIC RESONATOR (18.432MHz)
X5701 CRYSTAL RESONATOR
CN361,CN471 19P CONNECTOR
KN401 WRAPPING TERMINAL
Description
IC503
IC203
COILS AND FILTERS
RESISTORS
R406,R407
R402
R451
Other Resistors
4
C217,C219,C623-C625,C737
C509,C510,C515,C516
C741,C746,C751
C525,C526
C214,C215,C557,C559
CCSRCH101J50
CCSRCH102J25
CCSRCH180J50
CCSRCH220J50
CCSRCH221J50
C742,C747,C752
C738
C503,C504,C507,C508
C513,C514,C519,C520
C545,C546,C549,C550
CCSRCH390J50
CCSRCH470J50
CCSRCH471J50
CCSRCH471J50
CCSRCH471J50
C603,C604,C643,C644
C749
C641,C642
C529,C530,C533-C536
C221-C223,C226-C228
CCSRCH471J50
CCSRCH680J50
CCSRCH821J50
CEANP100M16
CEAT100M50
C607-C610,C613-C618
C635,C636,C639,C640,C787
C220,C229,C234,C235,C552
C711,C713,C720,C722,C783
C225,C230,C537,C539,C541
CEAT100M50
CEAT100M50
CEAT101M10
CEAT101M10
CEAT101M16
C619,C621,C651,C652,C789
C792
C522,C523,C728-C730
C528
C501,C502,C505,C506
CEAT101M16
CEAT101M16
CEAT102M6R3
CEAT1R0M50
CEAT220M25
C511,C512,C517,C518,C786
C739
C561
C212
C521,C524,C527,C531,C532
CEAT220M25
CEAT220M50
CEAT221M16
CEAT3R3M50
CKSRYB103K50
XV-DVR9H
1
2
3
4
5
Mark No.
6
Description
Part No.
C554
C201-C207,C209,C213,C216
C218,C236-C238,C547,C551
C553,C556,C558,C620,C622
C653,C654,C701,C702
CKSRYB103K50
CKSRYB104K25
CKSRYB104K25
CKSRYB104K25
CKSRYB104K25
C704-C710,C714,C718,C721
C723-C727,C731,C733,C734
C782,C785,C788,C791
C540,C542,C555,C735,C736
C538
CKSRYB104K25
CKSRYB104K25
CKSRYB104K25
CKSRYB105K10
CKSRYB224K16
RESISTORS
R231
R233,R241
R553,R569
R235
R237,R239
RS1/16S1001F
RS1/16S1201F
RS1/16S1500F
RS1/16S1801F
RS1/16S2001F
R242
R723,R726,R730
R533,R534,R536,R539,R548
R573-R575,R710-R712,R729
Other Resistors
RS1/16S2200F
RS1/16S6800F
RS1/16S75R0F
RS1/16S75R0F
RS1/16S###J
OTHERS
CN703 17P FFC CONNECTOR
JA501,JA502 RGB CONNECTOR
JA702 4P PIN JACK
CN702 CONNECTOR POST 10P
CN706 CONNECTOR POST 4P
52044-1745
AKB7157
AKB7170
S10B-PH-K
S4B-PH-K-R
VKN1815
KN781,KN782 WRAPPING TERMINAL VNF1084
CN704,CN705 23P PLUG
XKP3071
SEMICONDUCTORS
AK5357VT
BA7655AF
CY62148VLL-70ZI
K4S161622D-TC80
K4S281632E-TC75
IC1401,IC1421
IC1001
IC5002
> IC4007
IC1301
K4S561632E-TC75
M65673WG-A
MM1562FF
MM1603DP
MT48LC4M32B2TG-7
> IC4004,IC4006
NJM2872F05
NJU7013F
PCM1742KE
PQ015YZ01ZP
PQ070XZ02ZP
IC4206,IC5301,IC5321
IC3201
> IC4008
> IC4002
Mark No.
8
Description
Part No.
IC3251
IC5101
IC5202
IC1102
IC1201
UPC4570G2-A
UPD72852AGB-8EU-A
UPD72893BGD-LML
VYW2176
W986416DH-6
Q2101-Q2105,Q2201,Q2203,Q2301
Q2312
Q4000
Q2202,Q2222,Q2241
Q2302,Q2311
2SA1576A
2SA1576A
2SC2411K
2SC4081
DTC114EUA
Q2402,Q2403
Q3201,Q3202
Q1102
Q2001
D3001,D3101-D3104
HN1B04FU
RN1903
RN4982
UMF21N
1SS355
D5321
D5322
D4201
D3002
D1111
HVC359
HVC362
MA2ZV05
RB501V-40
RB521S-30
IC4003
IC4005
IC3301
IC3402
IC2211,IC2302,IC4101
PST3428U
PST3809U
SM5950AM
SM8707KV
SN74AHC2G53HDCT
IC3001
IC3002
IC5341
IC1104
IC3403,IC4205,IC5322
TC74LCX541FT
TC74VHC14FT
TC74VHC157FT
TC7SZ126FU
TC7WHU04FU
B
COILS AND FILTERS
F3102,F3401-F3403,F4201,F5101
L1001-L1009,L1101,L1102,L1301
L1401,L1402,L3301,L5501-L5505
L5507,L5508 EMI FILTER
L5301,L5321
DTF1069
DTL1106
DTL1106
DTL1106
LCYA100J2520
L4202
F3201
L2101
L4201
L5103-L5106
LCYA1R2J2520
VTF1096
VTL1067
VTL1079
VTL1082
C5311,C5329
C3253,C3258
C4208
C5105
C5325,C5327
CCSRCH100D50
CCSRCH101J50
CCSRCH240J50
CCSRCH271J50
CCSRCH330J50
C3207
C5131-C5138
C5326
C3254,C3257
C5121,C5122
CCSRCH331J50
CCSRCH4R0C50
CCSRCH5R0C50
CCSRCH681J50
CCSRCH8R0D50
C2208,C2317,C4034,C5322
C3251,C3255,C4001,C4002,C4004
C4029,C4037
C2101,C2221,C2405,C3201,C3204
C3206
CEVW100M16
CEVW101M16
CEVW101M16
CEVW101M6R3
CEVW101M6R3
C2301
C1061,C4022
C3106
C5321
C2308,C3102,C3107,C4003,C5341
CEVW220M6R3
CEVW221M4
CEVW2R2M50
CEVW470M16
CEVW470M6R3
C5301
C2220,C2243
C1031,C1032,C1503-C1506
C2204,C4206,C5309
C1901,C4014,C4019,C4033,C5006
CEVW4R7M35
CEVWNP100M10
CKSQYB104K16
CKSQYB105K10
CKSQYB225K10
C1004,C1012,C1014,C1029,C1034
C1040,C1044,C1049,C1051
C1110,C1111,C1207,C1208,C1307
CKSRYB102K50
CKSRYB102K50
CKSRYB102K50
C
6
D
E
F
87
XV-DVR9H
5
A
CAPACITORS
D MAIN ASSY
IC3101
IC2301
IC1103
IC5204
IC1101
7
7
8
1
Mark No.
A
B
C
D
2
Description
3
Part No.
C1311,C1313,C1407,C1408
C1427,C1428,C3303,C3408
CKSRYB102K50
CKSRYB102K50
C1003,C1027,C1037,C1052,C1109
C1206,C1305,C1308,C1310,C1406
C1425,C2305,C3003,C3004,C4018
C4020,C4207,C5214,C5222,C5224
C1508-C1510,C2311,C4104,C5306
CKSRYB103K50
CKSRYB103K50
CKSRYB103K50
CKSRYB103K50
CKSRYB104K16
C4103
C5328
C2202
C1002,C1005,C1007-C1010,C1016
C1018,C1019,C1021-C1023
CKSRYB223K50
CKSRYB473K25
CKSRYB563K16
CKSRYF104Z25
CKSRYF104Z25
C1025,C1026,C1028,C1030,C1035
C1038,C1041,C1042,C1047,C1102
C1105,C1106,C1108,C1114,C1202
C1204,C1302,C1304,C1312,C1402
C1404,C1422,C1424,C2102-C2106
CKSRYF104Z25
CKSRYF104Z25
CKSRYF104Z25
CKSRYF104Z25
CKSRYF104Z25
C2201,C2206,C2210,C2222,C2241
C2302,C2306,C2319,C2406,C2407
C3101,C3105,C3108,C3202,C3203
C3205,C3252,C3256,C3302
C4006-C4008,C4010,C4012,C4013
CKSRYF104Z25
CKSRYF104Z25
CKSRYF104Z25
CKSRYF104Z25
CKSRYF104Z25
C4017,C4021,C4024-C4026,C4032
C4202,C4203,C4209,C5113,C5118
C5120,C5125-C5127,C5204,C5215
C5218,C5225-C5228,C5230,C5308
C5310,C5323,C5342,C5343
CKSRYF104Z25
CKSRYF104Z25
CKSRYF104Z25
CKSRYF104Z25
CKSRYF104Z25
C1001,C1006,C1048,C1103,C1107
C1203,C1205,C1209,C1303,C1306
C1309,C1403,C1405,C1409,C1423
C1426,C1429,C3001,C3006
C3404-C3407,C4027,C4030,C4105
CKSRYF105Z10
CKSRYF105Z10
CKSRYF105Z10
CKSRYF105Z10
CKSRYF105Z10
C4107,C4201,C4401,C4501,C5110
C4028
C3402,C3403,C4015
C1054,C1060,C3301 (150/4V)
VC4201 (10pF)
CKSRYF105Z10
DCH1200
VCG1045
VCH1234
VCM1012
Mark No.
RAB4CQ103J
RAB4CQ103J
RAB4CQ103J
RAB4CQ103J
RAB4CQ103J
R5289,R5290
R1408-R1411
R4401,R4404,R4410,R4416,R4417
R4423,R4502,R4506,R4512
R4518,R4519,R4525
RAB4CQ103J
RAB4CQ220J
RAB4CQ223J
RAB4CQ223J
RAB4CQ223J
R1114-R1117,R4405-R4408,R4436
R4507-R4510,R4538
R1303-R1310,R1404-R1407
R1423-R1426
R1203-R1206
RAB4CQ330J
RAB4CQ330J
RAB4CQ560J
RAB4CQ560J
RAB4CQ680J
R3254,R3266
R3253,R3265
R3251,R3269
R5103
R5108
RN1/16SE1002D
RN1/16SE1201D
RN1/16SE2202D
RN1/16SE5101D
RN1/16SE9101D
R1207,R1502,R1507,R2017,R3002
RS1/10S0R0J
Description
Part No.
R3102,R3201,R3252,R4001,R4006
R4009,R4014,R4016,R4108,R4109
R5209,R5322
R4019
RS1/10S0R0J
RS1/10S0R0J
RS1/10S0R0J
RS1/10S1001D
R5321
R1501
R4020
R1031,R1032,R1034,R4105-R4107
R4201,R5130,R5141-R5144,R5248
RS1/10S101J
RS1/10S2202F
RS1/10S5600D
RS1/16S0R0J
RS1/16S0R0J
R5295,R5328
R4013
R4005
R5272
R4012
RS1/16S0R0J
RS1/16S1001F
RS1/16S101J
RS1/16S102J
RS1/16S1200F
R4011
R1022
R1024
R1021,R1023
R3408
RS1/16S1501F
RS1/16S151J
RS1/16S181J
RS1/16S2201F
RS1/16S220J
R2105,R2106,R2111,R2112,R2115
R4018
R5240-R5243,R5296,R5341,R5342
R5104-R5107
R3026
RS1/16S3300F
RS1/16S3600D
RS1/16S470J
RS1/16S56R0D
RS1/16S681J
Other Resistors
RS1/16SS###J
OTHERS
RESISTORS
R1025,R1026,R1042-R1046
R1048-R1051,R1054,R1068,R1069
R1072,R1073,R5218-R5221
R5229,R5230,R5247,R5249-R5252
R5255,R5258,R5259,R5273-R5275
4
CN4401,CN4501
40P FFC CONNECT0R
VKN1411
VKN1811
KN3 EARTH METAL FITTING
(27.000MHz)
VKN1814
VKN1815
VNF1109
VSS1146
(24.576MHz)
X4102 VCXO (27MHz)
VSS1184
VKN1812
VKN1813
VSS1195
E ATWB ASSY
OTHERS
E
F
88
CN709 40P ATA CONECTOR
VKN1816
VKN1879
F ATHB ASSY
OTHERS
CN707 40P ATA CONECTOR
VKN1816
VKN1879
G CONTROL ASSY
SEMICONDUCTORS
> IC901
> IC6001
BA178M05FP
BA178M09FP
IC8301-IC8303,IC8401,IC8501-IC8506 BA4558F-HT
IC8652
BA4558F-HT
IC3901
BD3812F
XV-DVR9H
1
2
3
4
5
Mark No.
6
Description
Part No.
7
Mark No.
8
Description
Part No.
IC804
IC2001
IC8402
IC2002
IC3902
BR24L32F-W
BU4052BCF
BU4066BCF
NJM4558MD
NJM4560M
C955
C2007,C2008,C6012
C3903,C3904
C3915-C3918,C8309,C8310
C8313,C8314,C8341,C8342
CEAL100M50
CEAL470M16
CEANP101M16
CEAT100M50
CEAT100M50
IC5501
IC801
IC803
IC802
IC805
PDC117B
PEG014A
PST3245
RS5C372A
TC74HCT7007AF
C8361,C8362,C8537,C8538
C8651,C8652,C8657,C8658
C4604,C4611,C5657
C6010
C3905,C3906,C3913,C3914
CEAT100M50
CEAT100M50
CEAT101M16
CEAT1R0M50
CEAT470M16
TC7WH08FU
TC7WU04FU
2SA1037K
2SA1576A
2SB1238X
C3931,C3932
C5655
C5516,C5524,C5527,C817,C835
C843
C3901,C3902,C5512,C5909
CEAT470M16
CEAT471M16
CEHAZA101M10
CEHAZA101M10
CKSRYB102K50
Q5503
Q2001-Q2004,Q5501,Q5504
Q5621-Q5623,Q5653,Q6001
Q801,Q802,Q951
Q3901-Q3904,Q805,Q808
2SB1689
2SC4081
2SC4081
2SC4081
2SD2114K
C2003-C2006,C5502,C5505,C5506
C5508,C5525,C8311,C8312
C8339,C8340,C8359,C8360
C8402,C8403,C8407,C8408,C841
C8505-C8512,C8517-C8524
CKSRYB103K50
CKSRYB103K50
CKSRYB103K50
CKSRYB103K50
CKSRYB103K50
Q2009,Q2010,Q803,Q807,Q950
Q804,Q806,Q911
Q952
Q901
Q2005,Q2007,Q8321,Q8404,Q8406
DTA124EUA
DTC124EUA
HN1C01FU
RN4903
UN5112
C8529-C8536,C8659,C8660
C909,C910,C960,C961
C3925,C4601,C4602,C5514,C5521
C5526,C5531,C5653,C5654,C5901
C5904,C6007,C803,C810
CKSRYB103K50
CKSRYB103K50
CKSRYB104K25
CKSRYB104K25
CKSRYB104K25
Q5502,Q8405,Q8407
D5653
D3903,D5521,D5901-D5905
D802-D804,D8301,D990-D995
D2003,D2005
UN5212
1SR154-400
1SS355
1SS355
DAP202K
C819-C821,C824,C825,C833
C836,C837,C840,C842
C905,C906,C950,C952-C954
C957
C807,C967
CKSRYB104K25
CKSRYB104K25
CKSRYB104K25
CKSRYB104K25
CKSRYB105K10
D801
D5621
D2001,D2002
D3901,D3902
D5502-D5508,D5510-D5513
RB501V-40
UDZS3R0(B)
UDZS6R2(B)
UDZS6R8(B)
UDZS8R2(B)
C802,C809,C822,C829,C830
C834
C8331-C8334,C8351,C8353
C8352
C4609,C4610
CKSRYB105K6R3
CKSRYB105K6R3
CKSRYB152K50
CKSRYB332K50
CKSRYB473K25
C8901-C8906
VCH1241
IC5901
IC950
Q5901
Q3907,Q5624
> Q5652
A
B
C
D
COILS AND FILTERS
L5651 CHIP COIL
L5501
L950
L5652
L5901 CHIP SOLID INDUCTOR
LCKAW100J2520
LFEA220J
LFEA470J
LTA102J
QTL1013
L4602,L4603 CHIP BEADS
L801 CHIP BEADS
VTL1076
VTL1081
RESISTORS
R947,R948
R3901-R3912,R3917-R3922
R8501,R8502,R8505,R8506
R8511,R8512,R8515,R8516
R8521,R8522,R8525,R8526
RS1/10S0R0J
RS1/10S101J
RS1/16S1002F
RS1/16S1002F
RS1/16S1002F
Other Resistors
RS1/16S###J
CAPACITORS
C5528
C951
C3909,C3910,C5509,C5510,C808
C812,C813,C816
C806
ACH1246
CCSRCH100D50
CCSRCH101J50
CCSRCH101J50
CCSRCH120J50
C907,C908
C5503,C5504,C958,C959
C5651
C8301,C8302
C3911,C3912,C811,C814,C815
CCSRCH180J50
CCSRCH220J50
CCSRCH221J50
CCSRCH331J50
CCSRCH470J50
C956
C8307,C8308
C8303,C8304,C8337,C8338,C8357
C3924
C2001,C2002,C2009,C2010,C911
CCSRCH561J50
CCSRCH680J50
CCSRCH821J50
CEAL100M16
CEAL100M50
OTHERS
E
X5502 CERAMIC RESONATOR
(10MHz)
X803 CRYSTAL OSCILLATOR
X950 CRYSTAL OSCILLATOR
(4.433619MHz)
ASS7034
X5501,X802
CRYSTAL RESONATOR (32kHz)
CN5503,CN5504 19P CONNECTOR
VSS1197
19R-1.25FJ
52045-0745
52045-0945
CN5505
CN8904
CN5506
CN5501
52045-1145
AKP7131
AKP7195
B16B-PH-K
11P FFC CONNECTOR
12P CONNECTOR
16P SOCKET
16P CONNECTOR
CSS1599
VSS1176
89
XV-DVR9H
5
6
F
7
8
1
Mark No.
A
2
Description
3
Part No.
CN5651,CN802
B2B-PH-K
CONNECTOR POST 2P
JA4601 OPT. LINK IN
JA4602 OPT. LINK OUT 12MB/S
BT801 LITHIUM BATTERY (CR2032)
GP1FA513RZB
GP1FA513TZ
VEM1034
VKN1246
Mark No.
4
Description
Part No.
C8516
C8514
C8203
C8546 (150/4V)
CKSRYB105K6R3
CKSRYB333K16
CKSRYB473K50
VCH1234
C8547,C8613 (150/4V)
VCH1246
RESISTORS
B
ST801 BATTERY SOCKET
KN2501 SCREW PLATE
KN5501,KN5502
WRAPPING TERMINAL
VKN1255
VKX1015
VNE1948
VNF1084
KN801 EARTH METAL FITTING
JA5901 MINI JACK(4P)
CN8901 13P PLUG
VNF1109
XKN3015
XKP3066
XKP3069
XKP3071
R8506
R8201
Other Resistors
OTHERS
H DSP ASSY
SEMICONDUCTORS
C
IC8201
IC8401
IC8501
IC8901
IC8902
AK4114VQ
AK4628VQE
DSPD56367PV150
NJM2391DL1-33
NJU7223DL1-18
IC8701
IC8702
IC8502
Q8504
Q8503
TC74LVX244FT
TC74VHCT244AFT
TC7WU04FU
UMD2N
UN5112
D8501
D8401
D8402,D8502,D8503
1SS355
DAN202K
DAP202K
L8002,L8004,L8501,L8502
L8201,L8203,L8204,L8401,L8402
L8504,L8701,L8702
E
F
C8419,C8505,C8507,C8509
C8511,C8512,C8515,C8518,C8520
C8522,C8524,C8526,C8528,C8530
C8532,C8534,C8536,C8539,C8541
C8543,C8545,C8551,C8703,C8706
CCSRCH471J50
CCSRCH471J50
CCSRCH471J50
CCSRCH471J50
CCSRCH471J50
C8548,C8549
C8701,C8704
C8406,C8415,C8902,C8904
C8204,C8555
C8009,C8405,C8418,C8517,C8554
CCSRCH8R0D50
CEVW100M16
CEVW101M16
CKSRYB102K50
CKSRYB103K50
C8010,C8202,C8207,C8213,C8215
C8407,C8420,C8422,C8504,C8513
C8521,C8523,C8525,C8527,C8529
C8531,C8533,C8535,C8537,C8538
C8540,C8542,C8544,C8550,C8702
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
C8705,C8901,C8903
CKSRYB104K16
1
2
90
CN8003 13P SOCKET
CN8007,CN8011 19P SOCKET
XKP3077
XKP3080
IC152
XSS3003
VNE1948
IC151
IC153
BA05FP
BA178M05FP
BA178M09FP
NJM78M56FA
PQ1K333M2ZP
Q152
Q155,Q156
Q153
Q158
Q151,Q157
2SB1237X
2SC2411K
UMF21N
UN5112
UN5212
D151
1SR154-400
> IC156
> IC154,IC155
CAPACITORS
CAPACITORS
ACH7231
CCSRCH100D50
CCSRCH101J50
CCSRCH471J50
CCSRCH471J50
VSS1171
SEMICONDUCTORS
ATL7002
QTL1013
QTL1013
C8217,C8225,C8408 (100/4V)
C8209,C8210
C8421
C8007,C8008,C8201,C8212,C8214
C8404,C8409-C8414,C8416,C8417
(20MHZ)
(24.576MHz)
KN8101 SCREW PLATE
I REG ASSY
COILS AND FILTERS
D
RAB4C101J
RS1/16S1802F
RS1/16S###J
C154,C158,C171,C181,C185
C166,C167,C175-C177
C153,C157,C170,C180,C184
C187
C162
CEAT100M50
CEAT101M16
CEAT1R0M50
CEAT221M16
CEAT470M50
C159-C161,C163-C165
C172-C174
CKSRYB104K25
CKSRYB104K25
RESISTORS
Other Resistors
RS1/16S###J
OTHERS
CN153 CONNECTOR 10P
CN152 CONNECTOR 16P
CN154 CONNECTOR 4P
PCB BINDER
52045-2145
B10B-PH-K
B16B-PH-K
B4B-PH-K
VEF1040
KN101 WRAPPING TERMINAL
VNF1084
J DISPLAY ASSY
SEMICONDUCTORS
IC5801
Q5801,Q5851,Q5854
D5851
PT6302LQ-003
2SC4081
UDZS3R9(B)
XV-DVR9H
3
4
5
Mark No.
Description
COILS AND FILTERS
L5802
L5801
6
Part No.
7
Mark No.
8
Description
Part No.
N IR ASSY
LFEA100J
LFEA220J
CAPACITORS
C5152
C5151
CAPACITORS
C5805-C5807
C5811
C5820
C5822,C5823
C5821
CCSRCH221J50
CCSRCH470J50
CEJQ101M6R3
CEJQ1R0M50
CEJQ220M35
C5808
C5801-C5804,C5810
C5809
CKSRYB102K50
CKSRYB223K50
CKSRYB224K10
A
CEJQ470M16
CKSRYB223K50
RESISTORS
Other Resistors
RS1/16S###J
OTHERS
5105 3P CABLE HOLDER
X5151 REMOTE RECEIVER UNIT
51048-0300
SPS-442-E1
O KEY L ASSY
RESISTORS
Other Resistors
RS1/16S###J
B
SWITCHES AND RELAYS
S5107-S5111
VSG1024
OTHERS
CN5851 WRAPPING TERMINAL
V5801 FL TUBE
JA5001 DV-TERMINAL
52045-0345
AAV7103
VKB1207
VKN1238
VKN1269
KN5851 3P FFC CONNECTOR
5802 FL HOLDER
VKN1275
VNF1084
VNF1122
RESISTORS
Other Resistors
RS1/16S###J
OTHERS
CN5105 CONNECTOR 4P
J5202 JUMPER WIRE
51048-0300
51048-0800
B4B-PH-K
D20PYY0305E
C
P KEY R ASSY
K LED ASSY
SWITCHES AND RELAYS
SEMICONDUCTORS
D5861
S5101-S5106
SLR-343BBT(GHJ)
VSG1024
RESISTORS
CAPACITORS
C5861
Other Resistors
CKSRYB103K50
RS1/16S###J
OTHERS
OTHERS
J5201 JUMPER WIRE
CN5101 9P CONNECTOR
52045-0345
L TRADE ASSY
XKP3082
SEMICONDUCTORS
M FRONT JACK ASSY
CAPACITORS
C5207,C5208,C5825,C5826
C5201
C5304
C5301,C5302
CCSRCH471J50
CKSRYB103K50
CKSRYB104K25
CKSRYB223K50
RESISTORS
R5201-R5203
Other Resistors
D
Q POWER SUPPLY UNIT
OTHERS
CN806-CN809 23P SOCKET
51048-0800
D20PYY0840E
VKN1240
RS1/16S75R0F
RS1/16S###J
>
>
>
>
>
IC402
IC501
IC603
IC604
IC702
FUSE 1.5A/125V
FUSE 1.25A/125V
FUSE 1.25A/125V
FUSE 0.75A/125V
FUSE 2.5A/125V
AEK7011
AEK7048
AEK7048
AEK7062
AEK7049
>
>
>
>
>
IC802 FUSE 3.5A/125V
IC951 FUSE 1.25A/125V
D302
D350
D451,D501
AEK7017
AEK7048
1SS133
MTZJ39B
D1NL20U
> D550
> D750
E
MTZJ15B
MTZJ4.3B
OTHERS
JA5301 MINITURE JACK
JA5201 YC CONNECTOR(VERTICAL)
JA5202 3PIN JACK(VERTICAL)
KN5201,KN5301
WRAPPING TERMINAL
52044-1745
AKN7005
VKB1190
VKB1206
VNF1084
F
91
XV-DVR9H
5
6
7
8
1
2
3
4
6. ADJUSTMENT
6.1 TV MODULE ADJUSTMENT
A
∗ It is not necessary to adjust the ASSY normaly when exchanging the ASSY. But the adjustment is
necessary when exchanging the Front End (U301) and IC302 VIF/SIF IC.
Adjustment Name
Adj. Point Measurement Point Adjustment Value
Adjustment State
No.
L315
The solder land named
"AFT"
1.90V ± 0.20V
Note1
Terrestrial tuner input /through output.
Any channel, RF Input ≥ 60dBu
System = B/G, I or D/K
AFT = OFF
Note1
VR300
The solder land named 3.80V ± 0.20V
"AGC"
Terrestrial tuner input
Ch = E9(203.25MHz), Video= Blackburst
RF Input = 60.0 ± 1.0dBu
System = B/G, I or D/K
VCO freerun frequency (AFC voltage)
adjustment
1
AGC start point adjustment
2
B
Note 1 : The adjustment spec. is defined without the thermal drift after the power on.
Therefore, start the adjustment at least 10 minutes after the power on.
A
TV MODULE ASSY
SIDE A
C324
AGC
R317
R350
3
VR300
KN300
L315
4
C
F303
AFC Adjust
R323
F304
R329
L313
U301
AGC Adjust
R357
R351
E2
R324
R325
GND
R320
R337
Q307
R332
D303
R354
Q315
F306
R319
VR300
R347
Q314 R353
R346
AWU
19
191
C346
LF
F305
R352
R333
L304
Q311
R359
4
C348
1
E2
C
B2
E2
Q301,Q311
TV MODULE ASSY
AWU8217
AWU8220
C323
R309
Q301
L307
R361
R360
C308
GND
C317
R345
L315
GND
F301
C328
Q319
C300
4
V+5TU
C302
C347
C313
C301
R358
L306
C310
C309
C303
E
E
B
C2
4
C314
C319
2
GND
1
NP
E
Q316
R356
F302
V+6E
CN300
R
EL FR4 P
D
Fig.1 Adjustment Points (TV MODULE ASSY)
TV MODULE ASSY
C342
C336
C331
R348
C332
R318
R338
12
12
1
13
24
R344
24
C325
C344
AGC Adj.
R
C330
AFC Adj.
Q309
L302
4 E2
GND
AFT
Q308
Q317
R322
EL FR4 P
R339
13
R305
R311
LF
AGC
TV MODULE
ASSY
GND
C306
R314
C305
Q304
C322
4
E2
R307
E
E
C307
C316
R306 C315
Fig.2 Measurement Points (TV MODULE ASSY)
XV-DVR9H
1
2
3
4
R342
C337
1
R349
C339
L311
C333
R335
L309
C334
Q305
C343
R312
R313
L316
C345
R315
L305
R331
R355
C326
Q310
R341
Q306
R334
R321
C327
R330
L300
R316
L314
Q302
R301
C304
R302
F
92
C340
R340
C335
R336
D302
IC302
C349
L301
L303
R300
R304
R310
C312
Land "AFT"
Land "AGC"
L312
NC
0 -A
1
2
3
4
5
6
7
8
9 C320
1
C318
Q313
Q303 R303
1
19
C341
1
0
1
2
3
4
5
6
7
8
9
D300
GNDTV
UVOUT
GNDTV
LDASH
LM/
P_SAVEBS
GNDTV
SIF
GNDTV C338
VE+37 R343
GNDTV
VE+6
GNDTV
C329
TUON
R326
AFT
R327
SDA
R328
SCL
AGC
AWU
70
81
2
3
4
5
6
7
8
9
Q300
D301
C311
R308
E
SIDE B
Q312
A
5
6
7
8
6.2 MAIN ASSY ADJUSTMENT
∗ It is not necessary to adjust the ASSY normaly when exchanging the ASSY, but confirm the data.
Adj. Point Measurement Point
Master clock free-running adjustment
(Clock system adjustment)
MAIN ASSY
IC3402 Pin8 (XTO)
(SM8707KV)
VC4201
C5209
156 157
CN4401
8
2
8
2
R5219
8
2
1
7
R4407
7 1
R4408
2
7 R4406 1 7 R4405 1
8
2
8
2
8 2
8 2
7 1
1
8
R5221
2
R4436
1
7
C5206
8
7 R5220 1 7 R5218 1
2
2 8
8
L5507
TP5204
R5244
R5239
8
2
8
1
C4020
R4501 R4503
R4507
1 7
7
12
R4508
CN4501
7 1
2
R4509
8
C5223
2
R4504
C5329
R5240
R5294
C5205
C5208
R5241
R5243
R5245
R5242
R5246
C4401
C5211
R5248
C5213
R5293
C5222
IC3301
2
1
8 R4538 2
R4541
1
CN4001
C4029
R4018
F4003
8
TP4005
C4023
R4014
C4024
F4001
R2017
R2019
TP4002
Q2001
C4021
TP4009
TP41
TP40
TP3012
TP42
TP3002
R4008
R4004
R4015
TP3003 TP3001 TP3014
TP3004
TP3006
TP3005
C4010
D
R4017
C3407
TP4001
TP4010
C4027
C4005
TP4012
IC4005
R4020
C3406
TP3402
C4004
Q3202
8
7
1
7
R3403
TP3401
C3405
F3403
C4018
C4006
TP4011
IC4003
TP3403
R4009
F3102
R3202
R4534
D4501
TP4201
R3203 R3204
TP3007
TP3008
IC4008
R4010
3
R3205
C3004
10
1
TP3010
TP3009
C4028
R3411
R3410
R3408
C3105
1
R3103
D3104
11
8
F3402
1
Q3201
IC3001
1
IC4004
C3102
20
TP3013
TP3011
C3001
R4019
D4001
IC3402 Pin8
4
5
D3002
R4530
R4537
C3402
C4014
TP4008
R3001
9
16
IC3402
4
R4531
C5221
R5297
5
IC3403
C4013
C3002
R3002
C3403
R3405
R3406
C3408
C3404
F3401
C3301
C3106
D3001
R5298
R3407
C5224
R3409
C3101
8
D3102
D3101
D3103
L5508
C5229
R4001
1
C5231
1
IC3101
R2015
R2026
TP2017
TP2025
TP2014 TP2024
R2014
R2013
TP2013
TP2016
1
1 7
TP3303
13
R1008
C1040
9
R3104
R3025
R3024
R3023
R3022
R3003
C3251
TP2023
R2012
R3271
R2011
7
C5230
C3303
L3301
16
1
4
R3105
L4202
TP2012
TP2011
7
52
C5218
R5295
R5261
R5296
C5225
2
8
2
8
L1006
2 C4211
3
R4201
X4201
R4210
5
C4210
R3270
TP2008
TP2009
TP2006
R2047
TP2005
1
C3302
C3108
R3108
R3107
R2254
Q2241
R2253
R2255
7
R4510
R3309
R3102
R3106
C2405
TP2003
TP2021
TP2004 R2027
TP2001 R2412
TP2019
TP2002
Q2402
R2405
TP2018
R2025
R2040
TP2022
1
8
C3255
C2243
R5250
R5255
R4435
R3304
R3313
R3305
C1058
C1053
TP1012
TP2007
C2406
2 8
8
2
7
R4432
C5321
C1059
TP1013
R4204
8
C4202
C4201
F4201
1
R5258
7 1
R5313
R5314
R3307
C3107
IC4205
D4202
4
1
8
24
R1074
L1004
R4205
C4208
D4201
8 2
R5259
R3311
R3312
R3306
VC4201
VC4201
7
2
R5275
2
C1050
1
1
R1003
L1001
C1042
L1005
C1036
R1005 C1035
C1038
R1004
L1003
TP1029
L4201
C4209
C4203
R4209
8
1
R5273
7
2 8
1
8
7
7 R5274 1
R5132
R5131
TP5106
C1060
L1007
7
R5123
C5119
C5118
R1009
C1041
C1037
C1055
C1030
C1029
C1026
C1024
C1056
R4207 R4208
TP2020
C5210
R5121
C5120
C1003
C1510
C1004
C1034
C1509
R1006
Q2102
Q2103
TP1027
TP1028
TP1032
R4202
C4206
5
8
4
R2404
R2411
C5123
R5124
R5112
R5113
C1001
C1028 C1002
C1016
R1011 TP1051
C1027 C1508
C1014
VR1001
R1090
TP1060
VR1002
8
C2210
IC4206
4
C4207
5
IC2302
1
TP2505
TP2503
TP2504
1
3
2
IC5204
TP4202
7
104
C2241
R2406
TP2506
1
TP2502
7 1
71
53
C
R4428
R4429
R3310
C1039
TP1030
8
R5283
105
R5284
C1049
R2227
R5225
R1031
5
IC2211
1
C2308
R2407
Q2403
7
C2311
R2306
8
R2408
C1047
R5224
R5227
R5228
R5230
R3303
C1006
R5236
C5228
R5229
R1066 C1051
C1048
R5234
R5235
R5238
R5278
R5279
R5280
C1045
R5217
R5237
R5281
R5282
R5285
R5232
R5214
C5227
R5277
R5287
R5288
R5289
TP38
TP31
R5215
C5226
R5286
C1052
R5222
R1045
IC5202
C5217
R5276
R5223
R4211
R4206 R4212
C2302
C2407
R2409
R1043
R2308
C2305
8
R2502
Q2104
C2103 R2103
R2107
C2104
C1013
R1080
C2220
C2223
C2332
3
1
1
5
1
R4213
R2214
IC2301
C1025
L1009
R2109
Q2105
C2105
Q2101
C2106
R2301
C2102
C2221
C2208
C2331
R2334
R2332 R2208
R2305
8 2
82
R1048
C5215
C1044
TP1033
2
TP32
C5207
R5231
R5233
TP5201 R5216
C1057
C1005
TP1026
R2209
R1905
2
C1021
TP1024
4
C2334
4
TP2501
C1012
R2239
TP1031
R2204
C2201
R2331
4
IC2331
6
C2333
R2333
R1904
R1901
R1902
R1903
7
C1019
R2111
R2233
R2235
R2221
Q2204
C2206
TP48
C1018
C2101
R2205
Q2203
TP49
R1034
C1017
Q2222
L5504
TP5202
R5290
C1022
C2205
TP4302
TP50
R1012
C1011
C2202
R2203
R2207
2
TP4301 TP4303
R5130
R5127
C5113
C1023
C2222
R2210
R4304
R4303
R2304
R2307
R2206
2 8
TP15
CN1901
R5265
Q2301
Q2202
1
C2306
1
64
TP1002
R2106
R2105
2
R5272
48
C2209
C2204
1 7
R2102
R2312
Q2311
R2303
C2301
7
2 8
R2302
TP4307
TP4306
TP4305
TP4304
R2313
8
Q2201
R4302
R2252
Q2312
R2202 R2201
8
C2246
Q2302
R4306
7 1
1 7
R2113
R2311
R2116 R2114
R2314
R4307
CN4301
7
R2115
R2266
1
2 8
C5216
C5126
C1031
R1021 R1022
TP1050
R1024
TP1041
C1032
R1023
1 7
8
IC5101
49
R2112
8
C4104
C4103
R4101
TP28
C2319
TP14
1
R4110
IC4101
5
4
VR2105
C2265
2
8
R5104
R1071
R4104
C2317
R4305
R5105
C1054
VR2104
R4103
L1102
2
L1008
R4108
C4102
R4107
TP1067
R5106
7
2
R5128
R5129
16
TP2015
D1111
R4105 R1111 C1114
C4106
C4105
3
R4106
C5105
C5110
1
2 8
1
C5103
C5127
17
33
C5125
R4102
X4102
4
R5107
C5111
C1061
1
R4109 C4107
R1052
B
R5247
1 7
8
C5104
R5126
32
R5103
R5249
7
208
X5101
R5125
7
C5137
C5138
Q1102
C5102
R5108
C5136
L5106
R5115
R5117
R5110
IC4007
L5105
C5112
L5104
L5101
L5102
L5501
R5109
C4033
C5132
L5103
C5101
C4032
7
C4034
1
C5204
C5214
L5502
C5212
C5124
C5122
A
No signal input
R5251
R5252
C5121
R5263
R5262
R5260
R5257
R5256
R5253
R5254
F5101
CN5102
C1104
27.000000MHZ
± 130Hz
SIDE A
TP4015
2
Adjustment State
MAIN ASSY
D4002
1
Adjustment Value
C4031
D
1
1
Adjustment Name
R5114
R5116
R5120
R5122
No.
E
F
93
XV-DVR9H
5
6
7
8
1
2
3
4
7. GENERAL INFORMATION
7.1 DIAGNOSIS
A
Service Diagnosis List
7.1.1 CPRM ID NUMBER AND DATA SETTING
The Setting is necessary
• " CPRM ERR" is displayed on the FL display immediately after the power is turned on or in Stop mode.
• When the MAIN ASSY , DRIVE ASSY or the FLASH ROM is exchanged.
7.1.2 MODEL SETTING
7.1.3 DOWNLOAD METHOD
The Setting is necessary
• When the MAIN ASSY is replaced.
• When the CONTROL ASSY is replaced.
• When the MAIN ASSY and CONTROL ASSY is replaced.
B
7.1.4 SERVICE MODE
[First Screeen] (Version information, etc)
[Sub Screen 1]
[Sub Screen 2] (Result of error-rate measurement)
[Sub Screen 3] (HDD information)
[Second Screen] (ATA/ATAPI debug screen)
[Sub Screen 3] (writer maintenance information of ATA/ATAPI DEBUG OSD)
[Sub Screen 4] (ATA/ATAPI DEBUG OSD_LD degradation judgement)
C
[Third Screen] (DV debug screen)
[Sub Screen 1] (DV/1394 debug OSD)
[Fourth Screen] (VR-recording error log)
[Sub Screen 4] (Error log for VR recording)
[Sub Screen 6] (R-Zone information)
[Fifth Screen] (Error log for VR playback)
[Sub Screen 2] (Error log for VR playback)
7.1.5 SERVICE SPECIFICATIONS OF PT MICROCOMPUTER
D
7.1.6 SPECIFICATIONS OF DSP DISPLAY
7.1.7 VIDEO ADJUSTMENT FOR SPECIFIC AREA
Purposes:
Depending on the area, jitter may appear in a picture received by the tuner, as conditions of signals received by
the tuner are different from area to area. To correct this kind of problem, the function of the System Codec AVIO
control section for adjusting signals received by the tuner can be used.
7.1.8 AGING MODE
E
F
94
XV-DVR9H
1
2
3
4
5
6
7
8
7.1.1 CPRM ID NUMBER AND DATA SETTING
Entering the ID Number and ID Data for DVD Recorder
For the DVD recorder,it is necessary with the recoding/playback of DVD–RW disc to set an individual number (ID number) and ID data to
each recorder. If the number and data are not set correctly with the following procedure, operations in the future may not be guaranteed.
You will find the ID number to be set on the ID label on the rear panel.
A
Important: If no ID label is found on the rear panel, write down the specified ID number by checking it according to "How to
confirm the ID number" shown below.
The Input is Necessary When:
• " CPRM ERR" is displayed on the FL display immediately after the power is turned on or in Stop mode.
• When the MAIN ASSY , DRIVE ASSY or the HDD is exchanged.
B
JIGS AND MEASURING INSTRUMENTS
Service Remote Control
Unit (GGF1381)
DVD Recorder Data Disc
(GGV1179)
C
D
E
F
95
XV-DVR9H
5
6
7
8
1
2
3
4
Input Flow of the ID No. and ID data when exchanging HDD, MAIN Assy or Drive Assy
A
When exchanging Drive Assy
• When exchanging HDD
Power →
• When exchanging HDD or MAIN
Assy, or both exchanged
ON
Also exchanging DRIVE Assy simultaneously
MODEL SETTING
Refer to "7.1.2 MODEL SETTING".
B
When displayed following message at
Power on
FL Tube : [HDD ERR]
CRT display :
Only exchanging
Drive Assy
Power on
FL Tube : [CPRM ERR]
CRT display :
HDD information is not correct.
CPRM information is not correct.
Confirmation of the CPRM ID No. (Refer to next page.)
C
Deletion of the CPRM ID No.(when ID No. is registered.) (Refer to next page.)
Input of the CPRM ID No. and ID data (Refer to next page.)
Power →
OFF →
ON
Normal operation mode
New HDD/when
there is error
on recorded contents
Exchanging to the original HDD(when
there is no error on
the recorded
contents.)
End
Power on
FL Tube : [HDD ERR]
CRT display :
D
HDD information is not correct.
Execute HDD Initialize from
the Disc Setup menu.
End
All recorded data are deleted if the HDD is intialized.
Take care that restoration of the user's data recorded on the HDD is totally
impossible.
Before servicing, OBTAIN THE USER'S PRIOR CONSENT to that effect.
Execute
HOME MENU → Disc Setup → Intialize
HDD → Start
*Goes to normal operation
with no caution
Disc Setup
Basic
Initialize
Finalize
Initialize HDD
Refer to "7.1.3 DOWNLOAD METHOD".
[CAUTION]
*Use Remote Control of
the model
E
Download the newest softwear.
Initialize
Start
End
F
96
XV-DVR9H
1
2
3
4
5
6
7
8
How to Input the ID Number and ID Data
A
Note:
Be sure to enter the ID number in Stop mode.
Use the service remote control (GGF1381) for operations. Only opening/closing of the tray are performed from the player.
The ID data disc is swept out automatically after the recorder has read the data from it.
1 To enter the input mode, press ESC + STEREO sequentially in
a status with no ID number set, such as after FLASH-ROM
downloading.
5 While the data are being read, the message shown in the figure
at left is displayed on the screen.
(The FL display indicates "LOAD ID.")
[Recorder's ID Data Setting]
2 As number input is enabled when the unit enters the input
mode, input the 9-digit ID number.
(The entered number is also displayed on the FL display.)
2
B
[Recorder's ID Number Setting]
ID Number ?
>--------5
<CLEAR> Exit
Loading The ID Data Disc !
Input ID Number !
C
6 When the ID data have been read, the data are written to the
FLASH-ROM.
(The FL display indicates "WRITE ID.")
3 After inputting the number, press SEARCH to register the ID
number.
ID Number ?
> 0 0 0 0 0 0 0 0 1 OK ?
3
6
<PLAY>
Compare Mode
<SEARCH> Enter
Wait Rom Writing !
D
Input ID Number !
4 When the ID number has been registered, the unit enters the ID
data input mode. (The FL display indicates "INSERT ID.")
In this condition, place the ID data disc on the tray and close the
tray using the CLOSE key "7/0" on the player.
7 When the ID data have been written to the FLASH-ROM, the
message "Rom Write OK" is displayed on the screen.
(The FL display indicates "ID DATA OK.")
8 After confirming this message, press CLEAR to exit the input
mode.
E
<CLEAR> Exit
4
7
Rom Write OK !
8
<CLEAR> Exit
Insert The ID Data Disc !
F
97
XV-DVR9H
5
6
7
8
1
2
3
4
How to Confirm the ID Number
A
1 Press ESC + STEREO sequentially with an ID number already
set, and the unit enters the ID number confirmation mode.
2 The set ID number is displayed on the screen (and on the FL
display), permitting you to confirm it.
3 To exit this mode, press CLEAR .
2
B
3
ID Number ?
[ 0 0 0 0 0 0 0 0 1]
Compare
>*********
<CLEAR> Exit
Input ID Number !
How to Clear the ID Number
C
1 Press ESC + STEREO sequentially with an ID number already
set, and the unit enters the ID number confirmation mode.
2 Input the same number as the ID number you have set.
2
D
ID Number ?
[ 0 0 0 0 0 0 0 0 1]
Compare
>*********
<CLEAR> Exit
<STEREO> ID Data Setting Mode
Input ID Number !
3 After inputting the number, press STOP .
Only when the entered number matches the set ID number, the
ID number is cleared and the unit exits this mode.
If the numbers do not match, you must return to step 2.
( STOP is not accepted until 9 digits are entered.)
ID Number ?
[ 0 0 0 0 0 0 0 0 1]
Compare
> 0 0 0 0 0 0 0 0 1 OK ?
<PLAY> Enter
<STOP> Memory Clear
<STEREO> ID Data Setting Mode
Input ID Number !
3
E
F
98
XV-DVR9H
1
2
3
4
5
6
7
8
7.1.2 MODEL SETTING
• The Setup is Necessary When :
a) When the MAIN Assy is replaced
b) When the CONTROL Assy is replaced
c) When the MAIN Assy and CONTROL Assy are replaced
A
Note : Make sure of setting the correct number.
• How to Setup the Model
1) After power on, the following screen is displayed on TV monitor.
Press " 32 " by using the remote control unit for service(GGF1381).
[ Recorder 's Model Setting]
Input the number by using the remote for Service.
> -Input No.
[
32
[
34
Model
: DVR-520H
: DVR-720H
B
]
]
2) After 1), the following screen is displayed on TV monitor.
Press " 012 " by using the remote control unit for service.
[ Recorder 's Type Setting]
Input the number by using the remote for Service.
> ---
(Type -- , Region No. -)
Input No.
[
01
[
02
:
:
Type
WY
WV
<Europe>
<UK>
]
]
C
Note : For WV type, press " 022 ".
The setting complete when OSD is disappeared.
3) Unplug the power cable.
4) Reset the recorder to all its factory settings.
1. Make sure that the recorder is on.
2. Press and hold [STOP] and press [STANDBY/ON] key on the front panel.
The recorder turns off with all settings reset.
5) Enter the Service Mode and then confirm the Model Name " DVR-520H/WY ".
1. Make sure that the recorder is on.
2. Press [ESC] then [DISP] keys by using the remote control unit for Service.
DVR-520H/WY
VERSION : 2.69
SYSCON : RELEASE_146
Rev
:1.5036 $
TUFLCON : 6.50 MASK
DRIVE : DVD-RW DVR-107X
1.16E
CKT0000353WL
HDD
DEVICE
REGION
C
FLASH
:
:
:
:
:
ST380012ACE
PRISM-PLUS
2
∗∗∗∗∗∗∗∗∗
64M
D
* XV-DVR9H is displayed as " DVR-520H/(Destination) ".
OK
OK
OK
OK
* TUFLCON for XV-DVR9H/(WY/WV) is displayed as " 6.xx ".
80
E
Notes :
1) After the setting complete, you can NOT CLEAR the seting data.
Make sure the pressing number.
2) " NG " is appeared on TV when unsuitable number is pressed.
In such a case, please unplug the power cable and plug it again. Then restart the model setting.
F
99
XV-DVR9H
5
6
7
8
1
2
3
4
7.1.3 DOWNLOAD METHOD
A
• The Download is Necessary When :
a) After model setting
b) When "NG" is displayed at First screen (version information, etc)
[Notes]
Be sure NOT to turn off the unit during downloading.
If the unit is turned off during downloading, the SYSCON, TUFLCON, and DRIVE programs may not be properly rewritten, in
which case the unit may not be able to initialize itself normally when turned on again. If that happens, repair the unit, as
described below, then perform downloading again:
B
• In a case where the power to the unit was shut off during rewriting of the SYSCON program:
The SYSCON program will not function properly if the power to the unit is forcibly shut off while the message "DOWNLOAD1" is displayed on the FL display during downloading. If downloading of the programs from the disc or through serial
communication becomes impossible, replace the FLASH ROM.
• In a case where the power to the unit was shut off during rewriting of the DRIVE program:
The DRIVE program will not function properly if the power to the unit is forcibly shut off while the message "DOWNLOAD-2" is
displayed on the FL display during downloading. If downloading of the programs from the disc or through serial
communication becomes impossible, replace the DRIVE ASSY.
• In a case where the power to the unit was shut off during rewriting of the TUFLCON program (only for the flash-type
TUFLCON microcomputers):
The TUFLCON program will not function properly if the power to the unit is forcibly shut off while the message "DOWNLOAD3" is displayed on the FL display during downloading. If downloading of the programs from the disc or through serial
communication becomes impossible, replace the TUFLCON microcomputer.
C
1. DISC DOWNLOAD METHOD
• How to Download
This is disc download method to save the initial setting data and user setting data.
However, the following data is deleted after downloading by this method.
* REC mode
* Last channel (Before turn unit off)
1) Open a disc tray in the " DVD " function.
2) Put the download disc on the tray.
3) Press and hold a " STOP REC " button for playback,
then press a " STOP " button on a front panel.
- The disc tray closes automatically and the disc is loaded.
- The disc tray opens automatically after loading.
4) Take out the Download Disc.
- " DISC DWLD " is displayed on FL and download is started.
- The display on FL changes to " DOWNLOAD-1 "
- The display on FL changes to " DOWNLOAD-2 "
- The display on FL changes to " DOWNLOAD-3 " (*)
- After download is completed, the power turns off, and turns on and a disc tray closes automatically.
* It takes for about 5 minutes until download is completed.
5) Press and hold a " ESC ", then press " DISP " on a test mode remote control unit for the release version confirmation.
6) Confirm a firmware release version.
7) Press " ESC " on a test mode remote control unit in order to exit the test mode.
D
E
(*) : " DOWNLOAD-3" is displayed only when the TuFL u-com is FLASH type.
F
100
XV-DVR9H
1
2
3
4
5
6
7
8
2. Serial DOWNLOAD METHOD
A
[Notes]
This method is secondary way when the disc loading is impossible.
• JIGS
* PC with serial port
* RS232C straight cable
* RS232C I/F jig (GGF1348)
* 7P FFC (VDA1681)
* Download program (UFU.exe)
* Firmware
B
• Connection
PC ⇔ RS232C cable ⇔ RS232C I/F ⇔ 7P FFC ⇔ DVD Recorder
• How to Download
1) Connect the 232C I/F JIGS above way.
2) Turn on the PC and start the " UFU.exe ".
.
3) Select the Firmware file. ("sz0" file)
4) Turn the DVD recorder on and start the download program.
" Target Device is connected" is appeared on the screen.
C
D
.
5) Select the Communication Speed (Baud Rate)
a) Base Speed
38,400
b) Data Send Speed
115,200
6) START
* Even if you click "START" button,
sometimes "Communication Error" may come out one to twice, and download may fail.
In this case, please click "START" again.
* Other factors can be considerd if download fails 3 times or more.
* And it takes about an hour for updating the firmware.
E
F
101
XV-DVR9H
5
6
7
8
1
2
3
4
7.1.4 SERVICE MODE
A
For service operations, use the GGF1381 remote control unit for service.
The Service-mode screens consist of nine mode screens, which are classified into such rough categories as recording system and VR
playback system, and their subscreens.
• How to enter Service mode : Press the ESC then DISP keys in turn while no GUI is displayed. The first screen (version
information, etc.) shown below is displayed.
• How to exit Service mode : Press the ESC key.
• How to advance to the next Service-mode screen
: While the first screen is displayed, press directly one of the keys 1-9. For service, use the
keys 2 to 5, as shown below.
• How to advance to a subscreen within the same Service-mode screen
: Press the DIG/ANA key.
B
The Service-mode screens to be used for service are as follows:
1 = First screen: Version information, etc.
2 = Second screen: ATA/ATAPI debug screen (Writer data)
3 = Third screen: DV debug screen
4 = Fourth screen: Error log for the VR recording system
5 = Fifth screen: Error log for the VR playback system
Description of Each Service-mode screen
1. First screen (version information, etc.)
C
1
2
3
4
5
D
6
7
8
9
10
DVR-520H/WY
VERSION : 2.69
SYSCON : RELEASE_146
Rev
:1.5036 $
TUFLCON : 6.50 MASK
DRIVE : DVD-RW DVR-107X
1.16E
CKT0000353WL
HDD
DEVICE
REGION
C
FLASH
:
:
:
:
:
OK : OK (proper combination)
NG+ : Version of the tuner microcomputer too advanced
(*1)
NG– : Version of the tuner microcomputer too old
OK
NG
OK
OK
OK
OK
ST380012ACE
PRISM-PLUS
2
∗∗∗∗∗∗∗∗∗
64M
: OK (proper drive)
: NG (improper drive) (*2)
OK : OK (proper combination)
NG+ : Version of the drive too advanced
(*3)
NG– : Version of the drive too old
80
OK
NG
: Serial No. of the drive already registered
: Serial No. of the drive not registered (*4)
(*1–*4 : Refer to two pages after.)
1 Model name/destination
2 Version of the recorder software
3 Revision No. of the system-control computer software
(Edition administration No. [from top to bottom, common
software, firmware, application software])
4 Version No. of the tuner microcomputer, Mask or Flash
Result of the combination ckeck with system u-com
5 Information on the built-in drive
(Model name, version No., model type, serial No.)
6 Data of the built-in HDD, capacity of the HDD
7 Version No. of PRISM
8 Region No.
9 CPRM data (CPRM key No.)
0 FLASH ROM information (64M)
E
• Details on HDD data are described below:
HDD
:
WDC10234564 # 80
Capacity of the HDD (unit: Gbytes)
HDD identification error indication
Name of manufacturer, part No. by manufacturer
F
If any abnormality exists in HDD connection, the indications shown in Table 1 below are displayed.
102
XV-DVR9H
1
2
3
4
5
6
7
8
Table 1: HDD data indications according to various HDD connection statuses
A
Example of HDD data
to be displayed
HDD identification conditions
Remarks
Failure in physical identification of HDD
(no connection, defective HDD, interface error)
Blank space
Physical identification of HDD possible, but not identified
WDC 10234564 # 80
"#" is displayed as HDD identification error
Physical identification of HDD possible, HDD identified,
but failure in logical formatting
WDC 10234564 ! 80
"!" is displayed as HDD identification error
Physical identification of HDD possible, HDD identified,
and correct logical formatting (HDD correctly identified)
WDC 10234564 80
B
While the first screen shown above is displayed, press the DIG/ANA key to enter the subscreen shown below.
Note: Each time the DIG/ANA key is pressed, the display changes between the first screen and its subscreen.
• Subscreen 1: Simple diagnosis of the RF level
By checking the AFT and AGC voltages in this debug mode, the status of the RF signal received by the UV tuner can
be checked.
MODEL
VERSION
TUFLCON
DRIVE
DEVICE
REGION
C
INPUT CH
AFT VOL
AGC VOL
:
:
:
:
DVR-520H/WY
2.69
6.50 MASK
DVD-RW DVR-107X
1.16E
DADL000219WL
OK
OK
OK
OK
C
: PRISM-PLUS
: 2
: ∗∗∗∗∗∗∗∗∗
: a8ch
: 2000 mV
: 5000 mV
AFT Voltage
AGC Voltage
D
E
F
103
XV-DVR9H
5
6
7
8
1
2
3
4
1) AFT voltage (AFT VOL)
How much tuning is off is monitored, as shown below:
A
5000mV
↑
Tuning is off toward lower frequency
↑
2400mV
↑
1900mV
Just Tune
↓
1400mV
↓
Tuning is off toward higher frequency
↓
0mV
B
2) AGC voltage (AGC VOL)
The gain controlled by the tuner is monitored to infer the input electric field intensity.
(The accuracy of inference differs depending on the product.)
Field Intensity
C
D
AGC VOL
Intense field area
(Clear image)
70 dBµ or more
2700 mV or less
Less intense field area
(Noise may be generated.)
50 dBµ or more
70 dBµ or less
2700mV - 4300mV
Weak field area
(Much noise. EPG/VPS/PDC sometimes cannot be
obtained.)
30 dBµ or more
50 dBµ or less
Very weak field area
(Image damaged. EPG/VPS/PDC cannot be
obtained.)
30 dBµ or less
4300mV or more
Distinction is impossible at
weak field or less.
4300 mV or more
Tips:
For good reception, the field intensity must be 50 dBµ or more (AGC VOL 3100 mV or more).
For accurate measurement, use a field intensity meter.
• Subscreen 2: Result of error-rate measurement
Note: Be sure to start playback after displaying this subscreen
to calculate the error rate.
E
During playback in VR mode, the average error rate of the past 10 VOBUs is displayed, and the rotation rate of the drive
(/: normal speed, no display = double speed) is also displayed.
• Subscreen 3: HDD information
F
Cumulative HDD-on time
104
XV-DVR9H
1
2
3
4
5
6
7
8
• How the data on cumulative HDD-on time are processed in memory
Storage place: Backup SRAM, Flash ROM
Timing of referring to the data on cumulative HDD-on time: When the power is turned on, the backup SRAM is referred to
regarding the data on cumulative HDD-on time, and the data are stored in the RAM. If referring to the backup SRAM fails, the flash
ROM is referred to.
Timing of updating the data on cumulative HDD-on time: While the HDD is on, the data on cumulative HDD-on time in the RAM
is updated every 3 seconds, and every time updating is executed the data are stored in the backup SRAM. When the power is turned off,
the data are stored in the flash ROM.
How to clear the data on cumulative HDD-on time
Backup SRAM: When the HDD Identification Setting is performed, the data on cumulative HDD-on time are automatically cleared.
The HDD Identification Setting is automatically performed when the CPRM setting is performed on the CPRM setting screen (to
display the CPRM setting screen, press the ESC then the STEREO keys), or when the HDD is initialized by pressing the "ESC" key
then the the "one-shot memory" key.
Notes: The data on cumulative HDD-on time are not cleared when resetting to factory-preset values is performed.
The data on cumulative HDD-on time are not cleared when the system-control computer software is downloaded.
A
B
Flash ROM: The data on cumulative HDD-on time cannot be cleared (they are not cleared even if resetting to factory-preset values is
performed or if the system-control computer software is downloaded).
Note: The data on cumulative HDD-on time in the flash ROM can be cleared if you clear the data in the backup SRAM following the
above-mentioned procedures then turn off the power of the unit, because the data in the backup SRAM are stored in the flash
ROM when the power is turned off.
• When "NG" is displayed at First screen (version information, etc)
C
(*1) NG+ : Version of the tuner microcomputer too advanced
NG- : Version of the tuner microcomputer too old
1. When TUFL µ-com is MASK type
NG+ : Download the firmware.
NG- : Replace the TUFL µ-com or JCKB ASSY.
2. When TuFL µ-com is FLASH type
NG- : Download the firmware.
D
(*2) NG : NG (improper drive)
Replace the correct Drive Assy.
(*3) NG+ : Version of the drive too advanced
NG- : Version of the drive too old
NG- : Download the firmware.
(*4) NG : Serial No. of the drive not registered
E
Check the part No. and replace the correct Drive Assy.
F
105
XV-DVR9H
5
6
7
8
1
2
3
4
2. Second screen (ATA/ATAPI debug screen)
A
Subscreen 1 of the second screen is displayed when the ESC, DISP, then "2" keys are pressed, in that order.
Note: Each time the DIG/ANA key is pressed, the display changes cyclically among subscreens 1 to 4.
• Subscreen 1: Command log (ALL) of ATA/ATAPI DEBUG OSD
B
(Not for Service)
• Subscreen 2: Command log (ERROR) of ATA/ATAPI DEBUG OSD
(Not for Service)
• Subscreen 3: Writer maintenance information of ATA/ATAPI DEBUG OSD
C
The cumulative power-on time and error log that are administered by the writer are displayed. Such information is obtained when the power
is turned on. Thereafter, each time the SEARCH key on the remote control unit for service is pressed while subscreen 3 is displayed, the
updating command is sent, and the data on the subscreen are updated. Care must be taken when updating this subscreen, because an
undesired command is inserted if it is executed while recording, etc.
1
2
3
D
Error log for the Writer
4
5
(Not for Service)
1
2
3
4
5
Power-on time/cumulative power-on time
Duration of emission of the laser diode (LD) for DVD-R/DVD while reading
Duration of emission of the LD for DVD-W/DVD while writing
Duration of emission of the LD for CD-R/CD while reading
Duration of emission of the LD for CD-W/CD while writing (This function is not used for this model.)
E
F
106
XV-DVR9H
1
2
3
4
5
6
7
8
• Subscreen 4: ATA/ATAPI DEBUG OSD_LD degradation judgment
A
The degrees of degradation of the LD (laser diode) for the writer (LDs for CD and DVD separately), temperature, and RF level are
displayed. To update the data on the subscreen, press the SEARCH key on the remote control unit for service while subscreen 4 is
displayed. See Table 1 below for a description of each item and the conditions for updating data.
1
2
3
4
5
6
B
Table 1: Description of each item and conditions for updating data
No.
Item
Conditions for updating by
pressing the SEARCH key
Description
Remarks
1
CD
Degradation judgment of LD for CD. Regarded as NG when the value
No disc inserted in the disc tray
is 120% or higher (same standard as for the PC drive)
∗1
2
DVD
Degradation judgment of LD for DVD. Regarded as NG when the
value is 120% or higher (same standard as for the PC drive)
∗1
3
TMP
Current temperature inside the Writer
∗1
4
ADJ
Temperature (approx. 25°C) inside the Writer during adjustment
∗1
5
RF
RF level (16-bit data, proportional calculation performed using the
actual RF level value with 2.5 V = 0xFFFF as the maximum value,
displayed in 4-digit hexadecimal)
During playback of disc medium
∗2
6
TLT
Writer adjustment data for straight (non-HDD) model
(FFFF is diplayed when the writer is not adjusted.)
No condition
C
∗1 : For correct judgment, after leaving the unit at a normal temperature (25°C typ.) for some time, judgment must be performed immediately
after the unit is turned on with no disc loaded.
∗2 : Use this item only for confirmation before and after lens cleaning, as the lens becomes dirty with dust.
D
E
F
107
XV-DVR9H
5
6
7
8
1
2
3
4
3. Third screen (DV debug screen)
A
Subscreen 1 of the second screen is displayed when the ESC, DISP, then "3" keys are pressed, in that order.
• Subscreen 1: DV/1394 debug screen
B
1
(DV/1394) Init:OK AV:01 DV:01
2
3
4
5
6
7
8
9
10
11
12
13
14
[Recorder] GUID:00E0360001600001 IRM
iPCR:C03F0000 oPCR:0000007A
[DV]
GUID:0080880303480E96
VN:VICTOR MN:GR-D50K
TM:C3 TS:75 CT:32 WP:01 PS:FF OS:00
CA:A000002020 CV:FF MD:VTR
[DVdecode:Yes]
TC:00h20m35s02f RD:02/02/05 RT:10h34m50s
ASPECT:4:3
CGMS:000000 APSTB:00 DEC:525-60
SF:32kHz QU:12bit AMODE:4) Stereo
[DVencode:No]
TC:--h--m--s--f RD:--/--/--/-- RT:--h--m--s
ASPECT:-------- CGMS:-- APSTB:--
No.
Description
Remarks
Whether the initialization of uPD72893B
(1394LINK & DVcodec IC) has been completed
(OK) or not (NG)
AV
Number of AV devices on the local bus
DV
Number of DV devices on the local bus
INT4
Number of executing INT4(PIO) interrupt
processing routines until a POWER ON
notification arrives from uPD72893B (normally, 02)
2
GUID
GUID set in ConfigROM of the unit
3
iPCR
oPCR
iPCR value of the unit
oPCR value of the unit
4
GUID
GUID set in ConfigROM of the connected DV
device
Data are displayed only if one DV device is identified. If the
connected DV device is ROOT (IRM), IRM is displayed at the
rightmost of the GUID indication
VN
Vendor name set in ConfigROM of the connected
DV device
Data are displayed only if one DV device is identified.
(Depending on the device, the vendor name may not be set in
ConfigROM.)
MN
Model name set in ConfigROM of the connected
DV device
(Depending on the device, the vendor name may not be set in
ConfigROM.)
TM
Transport Mode data obtained from the DV device
TS
Transport State data obtained from the DV device
CT
Cassette Type data obtained from the DV device
WP
Copy-protection data obtained from the DV device
PS
Power-state data obtained from the DV device
OS
Output signal mode data obtained from the DV
device
CA
Connect AV data obtained from the DV device
CV
Camera/VTR data obtained from the DV device
MD
DV device mode
D
5
E
6
7
F
Boldface alphanumerics
: Fixed indications
Nonboldface alphanumerics : Variable indications
Init
1
C
Item
INT4:02
In a case of NG, communication with uPD72893B may have
failed.
If the number does not become 01 even if a DV device is
connected, identification of that device fails.
In a case of ROOT (IRM), IRM is displayed at the rightmost of
the GUID indication
Camera or VTR is displayed only if one DV device is identified.
108
XV-DVR9H
1
2
3
4
5
No.
8
Item
-
=
~
!
7
Description
8
Remarks
A
[DVdecode:XXX]
Whether Yes (in the process of requesting DV
input) or No is indicated in XXX
Normally, Yes is indicated only when CH is set to DV
TC
Time-code data of the DVdecode Stream, or
response data of the Time Code command
Stream time-code data are obtained when playback in
the forward direction is performed. Otherwise, time-code
data are obtained through an AV/C command.
RD
RT
ASPECT
Rec Date of DVdecode Stream
Rec Time of DVdecode Stream
Aspect Ratio of DVdecode Stream
CGMS
CGMS of DVdecode Stream (from left to right,
Recording of DV input cannot be performed unless the
CGMS data of bits 5-4: Audio ch2, bits 3-2:
value of CGMS is 00.
Audio ch1, and bits 1-0: Video)
APSTB
APS trigger bit of DVdecode stream
DEC
With/without DVdecode stream input
With input: Signal type (525-60, 625-50, 1125-60, 125050, or Invalid) is indicated, Without input: "No" is
indicated.
SF
Sampling Frequency of DVdecode Stream
If SF is 44 kHz, it is considered that 44.1-kHz audio is
input, and sound is muted on the unit.
QU
AMODE
QUANTIZATION of DVdecode Stream
AUDIO MODE of DVdecode Stream
[DVencode:XXX]
Whether Yes (in the process of requesting DV Normally, Yes is indicated only with HDD or DVD
playback
output) or No is indicated in XXX
TC
RD
RT
ASPECT
TIME CODE of DVencode stream
REC DATE of DVencode stream
REC TIME of DVencode stream
Aspect Ratio of DVencode stream
CGMS
CGMS of DVencode stream (common to
video, audio ch1 and audio ch2)
APSTB
APS trigger bit of DVencode stream
9
0
6
B
C
Normally, sources other than CGMS=00 are not output.
D
E
F
109
XV-DVR9H
5
6
7
8
F
1
110
2
=
Defective IC, defective soldering, defective power supply,
etc.
-
No sound for DV input
No picture nor sound for DV
output
An audio signal with 44.1-kHz sampling frequency is
muted.
Check SF:
32 khz: An audio signal with 32-kHz sampling frequency is being input.
48 khz: An audio signal with 48-kHz sampling frequency is being input.
44 khz: An audio signal with 44.1-kHz sampling frequency is being input.
0
DV input recording impossible
2
3
Check DVencode during DVD/HDD playback:
Yes: The recorder is in the process of a DV output operation
No: The recorder is not executing a DV output operation
(No is also displayed during playback of copy-prohibited sources or
simultaneous-recording/playback.)
Recording cannot be performed for a copy-protected
source.
Check CGMS:
00:
A copy-permitted source is being input.
Other than 00: A copy-protected source is being input.
0
etc.
Check of DV decoding when the recorder channel is set to DV:
Yes: The recorder is in the process of a DV input operation
No: The recorder is not executing a DV input operation
Defective DV terminals, improper connection of the
DV-terminal board, defective IC, defective source device
Note: As to a model having the Input Line System
setting, if the setting and the actual input signal
system do not match, no picture appears.
Defective DV terminals, improper connection of the
DV-terminal board, defective IC, defective cables, an
IEEE 1394 device other than the DV device connected
Check the number of DV devices when one DV device is connected to the
recorder:
01
: The connected DV device is correctly identified.
Other than 01 : The connected DV device is not correctly identified.
Check DEC:
525-60: An NTSC DV signal is input from the DV device.
625-50: A PAL DV signal is input from the DV device.
No:
No DV signal is input from the DV device.
No picture nor sound for DV
input
B
8
1
Possible causes
A
Check the init indication:
OK: Initialization of DV-related LSIs (IC5101, IC5202) appropriately completed
NG: Communication failure between DV-related LSIs (IC5101, IC5202) and
etc.
HOST microcomputer (IC1001). Initialization of DV-related LSIs (IC5101,
IC5202) has not been completed properly.
Items to be Checked, and Conditions
D
No operation for either DV
input or output
E
Location in the
Debug Screen
C
Symptoms
Simple Diagnosis
1
3
4
XV-DVR9H
4
5
6
7
8
4. Fouth screen (VR-recording-related error log)
A
Subscreen 1 of the fourth screen is displayed when the ESC, DISP, then "4" keys are pressed, in that order.
• Subscreen 1:
B
• Subscreens 2 and 3:
These subscreens are not for service use.
• Subscreen 4: Error log for VR recording
1
C
1 Recording-related error log for the last 18 errors, divided into 2 screens (generation time [year-month-day,
hour:minute:second], error data in simplified description)
Notes:
• For details on error messages, see Table 1 "Description of VR-recording-related errors".
• The two error-log screens can be switched by pressing the SPEED+ or SPEED- key.
D
• Subscreens 6: R-Zone information
Set the DVD-R disc, then display the subscreen 6.
ver: TMP VMGI Ver
0010 : TMP VMGI Ver1.0 disc
0020 : TMP VMGI Ver2.0 disc
sa:
00000600 : TMP VMGI Ver1.0
00003000 : TMP VMGI Ver2.0
E
• Subscreens 5, 7 to 11:
F
111
XV-DVR9H
5
6
7
8
1
A
2
3
4
Table 1: Description of VR-recording-related errors
Error related to MPEG Encoder
Error Message
Description
Stream NG
Inappropriate input stream data
Stm Start NG
Failure to start encoding (reasons not clear)
AVEnc Hang
AVEncoder failed
No SysHdr IN
System packet is not input periodically
Strm Start NG
Timeout waiting for system packet input at the beginning
IN Encode *
Changes cannot be made in the process of encoding
B
Error related to Drive system
Error Message
C
D
E
Description
BUF Overflow
Overflow of the Stream Buffer
Drive Hang
The Drive is hung up.
Write Err
The Drive failed to write and could not be recovered.
Read Err
Reading failed, ECC failed, etc.
Drv Hard Err
Abnormality in the drive hardware or firmware
Mech No Res
No response from the mechanical-control computer
Drv TimeOut
Timeout waiting for drive operation
NWA Exhaust
NWA surpassed and impossible to use
MKB Invalid
MKB reading error
Drv Err
General error of the drive
Fail Repair
Repair failed
ReadOnly DISC *
Because some data are invalid, data cannot be written
May Be V mode
Although TMP_VMGI is not written, it may be Video Mode disc.
Rzn Rsv NG
Reserve RZone failed
Rzn Cls NG
Close RZone failed
Rzn Rpr NG
Repair RZone failed
Bdr Opn NG
Open Border failed
Bdr Cls NG
Close Border failed
Format NG
Format failed
OPC NG
OPC failed
PCA Full
PCA has been used up.
RMA Full
RMA has been used up.
VTSI_B Wr Err
Video Mode VTSI BUP Write Error
VTSI Wr Err
Video Mode VTSI Write Error
TMP-VMG WrErr
Video Mode TMP VMGI Write Error
CLS Rzon Fail
Video Mode Close Rzone failure
Error related to Dubbing
Error Message
F
Description
Mem get NG
Video Mode Copy Memory has not ensured.
V Rsv RzoneNG
Video Mode Copy Reserve Rzone failed
VCHDD Info NG
Obtaining Video Mode Copy HDD Cell information failed
VC Pck Anl NG
Analizing Video Mode Copy Pack failed
VC VOBU SizeE
Video Mode Copy VOBU Size NG
Tracon Trn NG
Video Mode Copy Tracon tranfer has not been completed.
112
XV-DVR9H
1
2
3
4
5
6
7
8
Error related to Dubbing (continued)
Error Message
Description
A
Strm TransfNG
Video Mode Copy Stream Transfer NG
VC FlushC NG
Video Mode Copy Flush Cache NG
VC Transf Stp
Video Mode Copy Transfer Stop
VC CopyCancel
Video Mode Copy Copy Cancel
VC Idling NG
Video Mode Copy idling NG
VC TSO BLK NG
Video Mode Copy TSO Block transfer has not been completed.
VC Cell Max
Maximum number for Video Mode copy Cells exceeded
VC HDD Inf NG
No information on Video Mode Copy HDD
VC HDD C Err
Inappropriate Video Mode Copy HDD content
V2H SRC Prot
VR →HDD copy prohibitted material
V2H Aud Ch NG
VR →HDD Audio Channel NG
V2H Aud Stm N
VR →HDD Audio Stream number NG
V2H Aud Md NG
VR →HDD Audio Mode NG
V2H V Reso NG
VR →HDD Video resolution NG
V2H Unknown
VR →HDD other NG
H2D CP SomeNG
VR →HDD copy and other NG
B
Other Errors
Error Message
Description
C
DRAM NG
Abnormality in access to the Work DRAM
SRAM NG
Abnormality in access to the backup work SRAM
CPRM IC NG
Inappropriate CPRM IC
Drive Destroy
The drive has crashed.
MKB REVOKED
Error in gaining data
WM Cracked
WM Cracked
VBR-SRAM NG
Abnormality in VBR SRAM
BK BATT Down
Backup RAM data has been erased.
BK FSYS Dirty
Backup RAM data has not been wrtten on the File Sys.
VOBU Info NG
Inappropriate VOBU information
EncModul Hang
Encoder routine is hung up.
Ourob Strm NG
Inappropriate stream data to the Ouroboros input
WaterMark Det
Watermark detected
No Video
No video input (not locked)
Disc Full
No further data can be written because the disc is full.
No More Info *
No more space in the internal work-management area
No Permission *
No permission to write to the disc
Limit Over *
Standard maximum limit exceeded
Rec Pause *
No operation permitted during recording pause
Invalid Param *
Invalid parameter
Protect Src *
Source to be recorded is copy-protected.
Now Busy *
In the process of the emergency processing
Invalid Disc *
The disc cannot be recognized.
Invalid UDF *
Invalid UDF content
Invalid VMG *
Invalid VMG content
Invalid TMVMG
Invalid TMP_VMGI content
Unmatch Stamp *
Impossible to modify because of nonmatching time stamp
Virgin DISC
Virgin Disc
D
E
F
113
XV-DVR9H
5
6
7
8
1
2
3
4
Other Errors (continued)
Error Message
A
B
C
Description
SW Vpb mode *
Switching to video playback routine is required.
SW Vrec mode *
Switching to video recording routine is required.
NV Pck MK Err
Error in creating NaviPack
NV Pck DMA Er
Inappropriate NaviPack DMA
Cell Close NG
Cell Close NG
Relocation Do
VR-recording data was relocated
Something *
undetermined error
Status NG *
Abnormality in change of statuses
Irr Action *
Incorrect action
Abort *
Cancellation
BusReset Done
Bus Reset has been excecuted.
Repair Excec
Repairing has been executed.
Format Excec
Formatting has been executed.
BUG
Some bugs
PARAM NO ACCP
Recording parameter is not matched.
DRAM CLR Err
Video Mode DRAM (Stream Buffer) Clear failure
V Categ ID NG
Inappropriate Category ID
V Cate Inf NG
Inappropriate Category information
V Ext TY NG
Type NG
V Ext MAX Ovr
Count Max exceeded
V ExtToo Big
The extension file is too large.
Over Heat
Abnormal temperatute
Error related to HDD
Error Message
D
E
Description
HDD unauthor
Inconsistent HDD serial No.
HDD Destroy
HDD is not recognized on the bus.
TT Rec Over
Title recording time full
HDDReset Done
HDD Reset executed
Task No Activ
Task has not been activated.
HDD Buff High
High-level process executed for the HDD Buffer
HDD Trans Err
DMA error in HDD copy transfer
HDD Zero WR
MBR readout generated
HDD Initialize
HDD initialized
HDD MBR NG
Inconsistent MBR data
HDD SIG NG
Inconsistent HDD Management Data Magic
HDD INFO BAD
Incorrect HDD Management Data
HDD IRRG POFF
Abnormal power off
HDD SMART NG
Inappropriate HDD SMART
No Error
Error Message
Non Err *
Description
Normal
Notes;
• Any error message marked with ∗ is displayed "RecErr : ---------"
on the Subscreen 1 of the fourth screen.
• In a case of an error in the drive system, scratches or dirt on a disc,
or a problem of the drive itself (dirty pickup) may be suspected.
F
114
Abbreviations:
ECC = 4 byte Code for Error Correction
UDF = Universal Disc Format
PCA = Power Calibration Area
OPC = Optical Power Control
NWA = Next Writable Address
VMG = Video Manager
RMA = Recording Management Area
MKB = Media Key Block
TMP_VMGI = Temporary Video Manager
Information
Border = from Lead-in to Lead-out
XV-DVR9H
1
2
3
4
5
6
7
8
5. Fifth screen (Error log for VR playback)
A
Subscreen 1 of the fifth screen is displayed when the ESC, DISP, then "5" keys are pressed, in that order.
• Subscreen 1:
B
• Subscreen 2: Error log for VR playback
1
2
C
1 Data on location of the display
Original(G)/play list (L), title No., chapter No. (X:XXX-XX), time of the display (hour, min, sec, frame [XXhXXmXXsXX]),
busy mark of the virtual mechanical-control computer (#), error rate of the transfer data (X.XeXX), playback logical
address (ID [XXXXXXXX])
2 Error message log
Original(G)/play list (L), title No., time of generation (min, sec [XXX:XXXX]), playback-related error log for the last 8 errors
(XXX:XXXXXXX)
Notes:
• For details on error messages, see Table 2 "Description of VR-playback-related errors".
• If a VR-playback-related error is generated, a problem in data reading from the disc may be suspected.
(The possibility of a problem on the drive side is high.)
D
• Subscreens 3 and 4:
E
F
115
XV-DVR9H
5
6
7
8
1
A
2
3
Table 2: Description of VR-playback-related errors
Error Message
B
C
D
4
Description
Tr : NullBlk
Transfer task: NULL at the top block
(Detecting NG stream made at the DVR-1000 series and starting protection process.)
Tr : ReadErr
Transfer task: ATA read error
Tr : SchLate
Transfer task: ATA search late
Tr : SemTOvr
Transfer task: Timeout for gaining semaphore (no synchronization with the display)
Tr : NaviErr
Transfer task: Inconsistency between NAVI (navigator) of management data and actual NAVI
Tr : OrderEr
Transfer task: Inconsistent order
Mn : Av1Hang
Main task: Detects hang-up of AV decoder and starts recovery
ERR_RCV!
TPP task: Detects hang-up of AV decoder and starts recovery
Tp : VobDif+
TPP task: The decoder STC advances by 1 VOBU hour.
Tp : VobDif-
TPP task: The STC of the management information advances
Tp : midNULL
TPP task: The management information pointer designated was NULL.
Tp : ScanNg
TPP task: Failure to set the TPP memory when scanning was canceled.
Tp : RStepEr
TPP task: Although the reverse step had failed, the operation was forcibly terminated because the top cell was located.
Tp : tppErr
TPP task: Inconsistency occurred.
Rv : 1stTOvr
Reverse playback task: Timeout for waiting for interruption to the top VOBU immediately after starting decoding
Rv : OpnTOvr
Reverse playback task: Timeout for waiting for B-picture of the open GOP immediately after starting decoding
Rv : OplTOvr
Reverse playback task: Timeout for waiting for I-picture of the open GOP immediately after starting decoding
Rv : LnkTOvr
Reverse playback task: Timeout for waiting for link
Rv : LnkFail
Reverse playback task: Starts compensation by detecting link failure
Rv : R2FTOvr
Reverse playback task: Starts retrial after detecting timeout from reverse pause to forward pause
Rv : TopVbEr
Reverse playback task: Forced termination because of a possible error of the top data during reverse normal playback
Rv : OrderEr
Reverse playback task: Inconsistent order
Av : B/CTOvr
AV1: Buffer-clear timeout
Av : StrmOvr
AV1: Timeout for waiting for stream ready
Av : TpmTOvr
AV1: Timeout for TP mode change
Av : SpmTOvr
AV1: Timeout for a step command
CC_OS_ERR
Closed caption task: OS error
Abbreviations:
STC = System Time Clock
VOBU = Video Object Unit
GOP = Group Of Picture
B-picture = Bidirectionally predictive-picture
I-picture = Intra-picture
P-picture = Predictive-picture
TP mode change = AV1 term (Trick Play mode change)
E
F
116
XV-DVR9H
1
2
3
4
5
6
7
8
7.1.5 ERROR RATE MEASUREMENT
How to enter Error-Rate Measurement mode
Press the ESC key then the SIDE-B key of the remote control unit for service to enter Error-Rate Measurement mode. During playback of
DVD-VIDEO, Error-Rate Measurement mode can also be entered by pressing the ESC key then the PLAY key.
A
How to exit Error-Rate Measurement mode
Press the ESC key. The error-rate display disappears, and Error-Rate Measurement mode is exited.
Note: The error rate cannot be measured in VR mode or during CD playback.
Functions
1 Video-mode recording (recording medium)
In this mode, DVD recording is automatically performed for 10 seconds, the recorded DVD title is played back while the error rate is
being measured, then as soon as playback of the recorded DVD title is finished, playback stops.*1 After error-rate measurement is
finished, the average error rate will be displayed on the FL display and OSD. Only in a case in which the calculation of the average error
rate fails, the tray will open.
2 DVD-VIDEO (playback medium)
Only during playback, when the ESC key then the SIDE-B key (or the ESC key then the PLAY key) are pressed, the error rate is
calculated and displayed on the FL display and OSD.(∗2) Only in a case in which the calculation of the average error rate fails, the tray
will open.
B
Changes of display
Table 1: Video mode (recording medium)
Display
Operation
FL Display
"ERROR RATE" is displayed on the FL display for an instant.
ERROR
RATE
DVD recording starts.
ERROR
RATE
DVD recording is performed for 10 seconds.
x x x x x
The recorded DVD title is played back while the error rate is being measured,
then as soon as playback is finished it stops.
ER
After error-rate measurement is finished (∗1), the average error rate, the
measurement-finish mark (∗), and the OK/NG-judgment result (∗3) will be
displayed on the FL display and OSD.
(If the tray opens as a result of NG judgment, the display on the FL display
and OSD will be retained.)
x . x E - x
C
OSD (On Screen Display)
ERR RATE : x.xE-x D
ER
x . x E - x
ERR RATE : x.xE-x * OK
Table 2: DVD-Video (playback medium)
Display
Operation
FL Display
Only during playback, when the corresponding keys are pressed, the error rate
is calculated and displayed on the FL display and OSD. (∗2)
ER
After error-rate measurement is finished (∗1), the average error rate, the
measurement-finish mark (∗), and the OK/NG-judgment result (∗3) will be
displayed on the FL display and OSD.
(If the tray opens as a result of NG judgment, the display on the FL display and
OSD will be retained.)
ER
x . x E - x
OSD (On Screen Display)
ERR RATE : x.xE-x E
x . x E - x
ERR RATE : x.xE-x - OK
F
117
XV-DVR9H
5
6
7
8
1
A
2
3
4
∗1 : Whether error-rate measurement is finished or not is judged, as shown in Table 3 below.
Table 3: On judgment whether error-rate measurement is finished or not
Judgment whether error-rate
measurement is finished or not
Recording Mode
After playback of a certain amount (∗) of data
Measurement of the 16 ECC blocks is performed 16 times,
then the grand sum is used for calculation of the error rate.
The capacity is as follows:
16 ECC blocks × 16 sectors × 2048 bytes × 16 times
= 8388608 bytes
= 67108864 bits
Video mode
Recording/playback duration required
for error-rate measurement
The time required for completion of error-rate
measurement varies, depending on the input video
signal to be recorded.
(The more the motion in the input video signal to be
recorded is animated, the shorter the playback time
required for completion of error-rate measurement
becomes.)
B
∗2 : During DVD-VIDEO error-rate measurement, even after error-rate measurement is finished, playback continues, and the display of the
error rate results is retained. In this playback mode, if Error-Rate Measurement mode is exited by pressing the ESC key, then it is
reentered by pressing the ESC and SIDE-B keys (or ESC and PLAY keys), the error rate will not be updated, and the previous value is
displayed. To reset the previous error rate, stop disc playback.
∗3 : OK/NG judgment
In DVD/VIDEO and Video Mode recording, OK/NG judgment is displayed under the following conditions:
Table 4: List of OK/NG threshold values
C
Disc Type
Recording Mode
Finalized or not finalized
DVD-R
Video mode
DVD-RW
Video mode
Reference Value
Display
8.0 × 10 – 4
OK / NG
Finalized
1.0 × 10
–3
OK / NG
Not finalized
1.0 × 10
–3
OK / NG
Finalized
1.0 × 10 – 3
OK / NG
Not finalized
1.0 × 10 – 3
OK / NG
DVD-VIDEO
D
E
F
118
XV-DVR9H
1
2
3
4
5
6
7
8
7.1.6 SERVICE SPECIFICATIONS OF THE PT MICROCOMPUTER (PDC117A-K)
1. Conditions during checking
• Ignore whether Protection mode is activated.
• Even if the unit was automatically shut down after detecting that the Protection circuit had been activated in Normal mode,
you can turn the unit on without waiting for one minute.
• Only this unit can be operated without the subwoofer. (The VOLUME operations can be performed.)
A
2. How to enter Test mode
• Turn the AC power of the DVD-RW TUNER on while holding the OPEN/CLOSE and HDD/DVD keys of the unit pressed
simultaneously.
• Then turn on the unit by pressing the STANDBY/ON key.
The indications displayed on the FL display when Test mode is entered differ according to whether the unit was previously
turned off normally or the unit was shut down because the Protection circuit had been activated, as shown below:
B
[After the power was turned off normally]
[Indications]
P OW E R
ON
Vo l ume
0
HD
SERV I CE
[After the power was shut down because
of an abnormality in the SW section]
[Indications]
P OW E R
PRTCT
HD
[After the power was shut down because
of a failure in the SW section]
[Indications]
ON
P OW E R
WN G
PRTCT
SERV I CE
HD
C
ON
ERR
SERV I CE
• To quit Test mode, turn the unit off by pressing the STANDBY/ON key then turn the AC power of the DVD-RW TUNER off.
• Upon quitting Test mode, the unit initializes only the data on the protection error in RAM.
D
3. Operations
• Basically, operations in Test mode are the same as those in Normal mode. However, to clearly demonstrate that it is in Test
mode, when a function is switched, the indications on the FL display are as shown below:
[Function]
[Indication]
HDD/DVD
HD
SERV I CE
TUNER
TX
SERV I CE
ANALOG
AN
SERV I CE
DIGITAL
D1
SERV I CE
(Europe)
E
4. DSP error indication
• Each time the DISPLAY key on the remote control unit is pressed while the power is on, the DSP error indication and normal
indication are switched alternately.
F
119
XV-DVR9H
5
6
7
8
1
2
3
4
7.1.7 SPECIFICATIONS OF THE DSP DISPLAY
A
• Specification of DSP error display
FL
OOOOOO - UM 9
96k (This character is displayed while the source is 88.2 or 96kHz PCM.)
DSP MUTE (This character is displayed while DSPMUTE is active.)
DIR UNLOCK (This character is displayed while DIR is UNLOCK.)
Space
The name of an error is displayed by six characters.
B
Example)
C
ERR. 0
D I R E RR - UM
ERR. 1
D S P E RR - UM
ERR. 2
HREQ
ERR. 3
DSP
ERR. 4
DMU T E
- UM
NG - UM
-
NO ERR D S P
OK (The source is 88.2/96kHz.)
M
9
NO ERR D S P
OK (The source is 88.2/96kHz.)
• DSP error message mode
D
Press the "DISPLAY" key in service test mode, to select the mode that DSP error messages are displayed.
Press the "DISPLAY" key again to select the normal service test mode.
For this reason, make the usual function of "display" not effective in the service test mode.
E
F
120
XV-DVR9H
1
2
3
4
5
6
7
8
Detectable DSP Errors
A
The following conditions are assumed,
in order to eliminate causes other than "DSP-assy" and "between DSP-assy and microcomputers".
• Electric power is correctly supplied to DSP-assy.
• The SPDIF signal is coming to the input port of DIR.
• There is no audio output from DSP-assy, or audio output is unusual.
* "U", "M" display below is a sample.
Those character display ON/OFF depends on the state.
• ERR_0 : –Cannot receive data from DIR–
FL D I R E R R - U M
→ Communication fault has occurred somewhere between DIR (IC8201 PinNo.32 CDTO)–Level Shifter (IC8702)– µ-com
(IC5501 PinNo.58 DIRDO).
→ Communication fault has occurred somewhere between the µ- com-port (*1) which has sent the signal and each IC.
B
FL D S P E R R - U M
• ERR_1 : –Cannot receive data from DSP–
→ Communication fault has occurred somewhere between DSP (IC8501 PinNo.144 MISO)–Level Shifter (IC8702)–µ-com
(IC5501 PinNo.24 DSPDO).
→ Communication fault has occurred somewhere between the µ-com-port (*1) which has sent the signal and each IC.
→ Communication fault has occurred somewhere between the DIR and DSP.
- UM
FL H R E Q
• ERR_2 : –There is no return value of HREQ.–
→ Communication fault has occurred somewhere between DSP (IC8501 PinNo.3 HREQ)–Level Shifter (IC8702)–µ-com
(IC5501 PinNo.59 DSPHREQ).
C
• ERR_3 : –ERR information from DSP–
NG - UM
FL D S P
(especially the fault inside DSP)
M
• ERR_4 : –DECOMUTE continues being LOW(MUTE).– FL D M U T E
→ Communication fault has occurred somewhere between DSP (IC8501 PinNo.21 PB12 MUTE)–Level Shifter (IC8702)–µ-com
(IC5501 PinNo.60 DECMUTE).
→ Communication fault has occurred somewhere between the É com-port (*1) which has sent the signal and each IC.
D
Although the following are not errors, they are displayed separately and are helpful in finding a solution.
• INFO_0 : –DIRERR is HIGH (UNLOCK) in digital function.– FL D S P O K - U M
If DIRERR continues being HIGH (UNLOCK) without the above-mentioned error display.
→ Communication fault has occurred in somewhere between DIR (IC8201 PinNo.36 INT0)–Level Shifter (IC8702)–µ-com
(IC5501 PinNo.57 DIRERR).
• INFO_1 : –DSPMUTE is LOW (MUTE).–
OK M
FL D S P
If DSPMUTE continues being LOW (MUTE) without the above-mentioned error display.
→ Communication fault has occurred in somewhere between µ-com (PinNo.62 XDSPMUTE)–connector (CN8011 No.19 MUTEOUT).
• INFO_2 : –Loading 88.2kHz/96kHz PCM–
DSP function is limited when this information is displayed.
FL
D S P
OK -
E
9
Notes :
Only the high priority error (near to ERR_0) is displayed when the multiplel errors have occurred.
When the analog audio output of a DSP module is unusual but the above error information is not displayed, the fault is probably in the
CODEC IC (IC8401) and the peripheral circuits.
As the µ-com has not received data from the CODEC IC, it cannot detect the fault and display the error information.
121
XV-DVR9H
5
6
F
7
8
1
2
3
4
*1 : µ-com-port which has sent the signal to IC
IC5501 µ-com port
A
Pin No. Pin Name
No.25 DSPCLK
Pin No. Pin Name
No.34 CCLK
IC8401 CODEC port
Pin No. Pin Name
No.42 CCLK
No.23
DSPDI
No.33
CDTI
No.43
CDTI
No.67
DIRCS
No.35
CSN
No.41
CSN
No.66
DIRRST
No.31
PDN
No.17
PDN
IC5501 µ-com port
Pin No. Pin Name
No.25 DSPCLK
B
IC8201 DIR port
IC8501 DSP port
Pin No. Pin Name
No.1
SCK
No.23
DSPDI
No.143 MOSI
No.63
DSPSS
No.2
SS
No.64
XDSPRST
No.44
RESET
No.65
DSPMODE
No.137 MODA
IC5501 µ-com port
Pin No. Pin Name
No.58 DIRDO
No.57
DIRERR
IC8201 DIR port
Pin No. Pin Name
No.32 CDTO
No.36
INT0
IC5501 µ-com port
Pin No. Pin Name
No.24 DSPDO
IC8501 DSP port
Pin No. Pin Name
No.144 MISO
No.59
DSPHREQ
No.3
HREQ
No.60
DECMUTE
No.21
PB12 MUTE
C
D
E
F
122
XV-DVR9H
1
2
3
4
5
6
7
8
7.1.8 VIDEO ADJUSTMENT FOR SPECIFIC AREA
Purposes: Depending on the area, jitter may appear in a picture received by the tuner, as conditions of signals received by
the tuner are different from area to area. To correct this kind of problem, the function of the System Codec AVIO
control section for adjusting signals received by the tuner can be used.
A
How to enter setting modes: To enter General Setting mode, press the ESC key then the CHP/TIM key of the remote
control
unit for service. To enter Specific Channel Setting mode, press the DIG/ANA key in General
Setting mode.
How to exit setting modes: Press the ESC key. The setting mode is exited, the OSD disappears.
1. General Setting mode
This mode can be entered only during recording/playback stop. In this mode, each item and its current settings are displayed on the OSD.
The currently selected input mode (TUNER or LINE) is displayed. If L1, L2, L3 or DV is selected for input, general settings for the line
input can be made, and if TUNER is selected, general settings for the tuner input can be made.
B
[General Setting mode] (A picture from the tuner can be viewed using the semitransparent OSD display.)
∗ : setting is the default.
C
Table 1: Key operations in General Setting mode (effective only during recording/playback stop)
Key
Operation
Setting (∗: Default)
Remarks
INPUT SELECT,
CHANNEL +/– (∗R) (∗2)
Switches inputs or channels.
TUNER / LINE
–
[SIDE A], [SIDE B] (∗1)
Sets Sync AGC.
–
[Rev ×3], [×3 Fwd]
(∗1)
Sets Threshold level.
ON (∗) / OFF
(∗) Normal
Auto Threshold Level
Manual Threshold Level
Pedestal Level
According to the setting of Threshold,
the values can be changed within the
range mentioned below.
[Rev CHAPTER SKIP]
[CHAPTER SKIP Fwd]
(∗1)
Sets Threshold level.
–
• Normal:
The value is fixed, with no display of
the value.
–
• Auto Threshold Level:
0-8 (Default: 0)
–
• Manual Threshold Level:
0-8 (Default: 0)
• Pedestal Level:
0-8 (Default: 0)
D
–
–
–
[Rev SCAN],
[SCAN Fwd] (∗1)
Sets V-Sync Det.
Normal (∗) /Short/Long
–
[Rev STILL STEP],
[STILL STEP Fwd] (∗1)
Sets Std Det.
Normal (∗) /Non STD
–
E
Normal (∗) /Fast/Stop
[SPEED +], [SPEED -] (∗1) HD Err Det
CLEAR (∗1)
Initializes the setting of General
Setting mode.
–
Pressing the key resets all settings
(1-3 of Table 2) of General Setting
mode to the initial values. Settings
of Specific Channel Setting mode
are not affected (they are retained).
ESC
Exits AVIO setting for specific areas,
clearing the OSD. (Tuner screen appears)
–
–
F
∗R: Refers to keys on the remote control unit supplied with this unit. The keys without "R" refer to the remote control unit for service.
123
XV-DVR9H
5
6
7
8
1
A
2
3
4
∗1 : If a setting value is changed, that is immediately reflected, and the data are written to nonvolatile memory. The setting data to be stored
in nonvolatile memory in General Setting mode are as shown in Table 2 below:
Table 2: Setting data to be stored in nonvolatile memory in General Setting mode
Selectable settings
for TUNER/LINE
Setting item
B
LINE
TUNER
1 Sync AGC
ON or OFF
Same as TUNER
2 Threshold
Normal, Auto Threshold Level,
Manual Threshold Level, or
Pedestal Level
Same as TUNER
3 Threshold LEVEL
0-8
Same as TUNER
4 V-Sync Det
Normal, Short, or Long
Same as TUNER
5 Std Det
Normal or Non STD
Same as TUNER
6 HD Error
Normal, Fast, or Stop
Same as TUNER
∗ The setting values will not be reset to default even if resetting to the state at the time of shipment is performed.
∗ If the software for the system-control computer is downloaded, the setting values are initialized to default regardless of its having or not
having the function of resetting to the state at the time of shipment. If the software for the system-control computer is downloaded to a
disc, initialization of setting values in General Setting mode is performed as follows:
( i ) When the software for the system-control computer with the function of resetting to the state at the time of shipment is downloaded to
a disc: The setting values in General Setting mode are initialized to default.
( ii ) When the software for the system-control computer without the function of resetting to the state at the time of shipment is downloaded
to a disc: The setting values in General Setting mode are not initialized to default (The setting values before downloading will be
retained).
C
∗2 In General Setting mode, when the displayed channel has its individual settings, the indications on the screen are as shown in below:
[Display in General Setting mode when the channel currently displayed has specific settings]
D
2. Specific Channel Setting mode
This mode is entered when the DIG/ANA key is pressed in General Setting mode. In this mode, specific settings can be made for up to 12
channels. For channels that do not have specific settings, the settings of General Setting mode are applied.
[Display in Specific Channel Setting mode] (A picture from the tuner can be viewed using the semitransparent OSD display.)
E
General Setting data
• If a channel that does not have specific settings is
displayed, the setting figures are displayed as
hyphens (--).
If the setting figures are not displayed as hyphens,
those settings have been specifically set even if
they are identical to the default settings or those of
General Setting mode.
Specific Channel
Setting data
∗ : setting is the default.
F
124
XV-DVR9H
1
2
3
4
5
6
7
8
Table 3: Key operations in Specific Channel Setting mode
(effective only during recording/playback stop)
Key
DIG/ANA
A
Operation
Setting (∗: Default)
Remarks
General Setting mode and Specific
Channel Setting mode are alternately
selected.
–
–
Each time the Input Selector or
channel is changed, the general
setting data and specific channel
setting data on the display are
changed.
INPUT SELECT,
CHANNEL +/–
(∗R)
[Rev ×3], [×3 Fwd] (∗3) Sync AGC setting for an individual
channel is performed.
[Rev CHAPTER SKIP]
[CHAPTER SKIP Fwd] The Threshold type can be selected.
(∗3)
[Rev SCAN],
[SCAN Fwd],
[Rev STILL STEP],
[STILL STEP Fwd]
(∗3)
The Threshold Level can be set.
–
On the display of General Setting
mode, only the selected input, i.e.,
TUNER or LINE is changed.
ON (∗) / OFF
–
(∗) Normal
Auto Threshold Level
Manual Threshold Level
Pedestal Level
According to the selected Threshold
type, the value can be changed in the
range shown below:
• In a case of Normal: The level is
fixed, with no indication of its level.
B
When the Threshold type is
changed, the corresponding
Threshold Level is displayed.
–
–
e STILL STEP: Each time this key is
pressed, the number decreases one by
• In a case of Manual Threshold Level: one in the range of 0-8, cyclically.
STILL STEP E: Each time this key is
0-8 (Default: 0)
pressed, the number increases one by
• In a case of Pedestal Level: 0-8
one in the range of 0-8, cyclically.
(Default: 0)
• In a case of Auto Threshold Level:
0-8 (Default: 0)
All channels that have individual setting
data will be canceled, and the individual
data that have been stored in nonvolatile
memory will be reset to default.
PLAY (∗3)
If the currently selected channel has its
individual setting, that setting will be
canceled. By canceling the individual
setting for that channel, the number of
remaining channels that can have
individual settings will be increased by
one.
CLEAR (∗3)
D
–
To quit the AVIO setting mode for specificarea setting and clear the On-Screen
Display (the screen will return to that for
the tuner)
ESC
–
All the individual channel setting
data for the currently selected
channel are reset to the initial
values.
The General Setting data will not
be changed (will be retained).
The General Setting data will not be
changed (will be retained).
The specific-channel-setting data for
the currently selected channel are
reset to default.
PAUSE (∗3)
–
All data stored in nonvolatile memory
shown in 1 to 4 of Table 4 will be
initialized. The General Setting data will
not be changed (will be retained).
C
–
–
∗R: Refers to keys on the remote control unit supplied with this unit. The keys without "R" refer to the remote control unit for service.
E
∗3 : Setting data to be stored in nonvolatile memory in General Setting mode are shown in Table 4:
F
125
XV-DVR9H
5
6
7
8
1
2
3
4
Table 4: Setting data to be stored in General Setting mode
A
Setting Item
Selectable Value
1 Channel stored in memory
Any channel among all tuner or line channels (min: 0, max: 12)
2 SYNC AGC
ON or OFF (stored in memory for each channel that has individual settings)
3 Threshold
Normal, Auto Threshold Level, Manual Threshold Level, or Pedestal Level
(stored in memory for each channel that has individual settings)
4 Threshold LEVEL
0-8 (stored in memory for each channel that has individual settings)
* The setting values will not be reset to default even if resetting to the state at the time of shipment is performed.
* If the software for the system-control computer is downloaded, the setting values are initialized to default regardless of its having or no
having the function of resetting to the state at the time of shipment. If the software for the system-control computer is downloaded to a
disc, initialization of setting values in Specific Channel Setting mode is performed as follows:
( i ) When the software for the system-control computer with the function of resetting to the state at the time of shipment is downloade
to a disc: The setting values in Specific Channel Setting mode are initialized to default.
( ii ) When the software for the system-control computer without the function of resetting to the state at the time of shipment is
downloaded to a disc: The setting values in Specific Channel Setting mode are not initialized to default (The setting values before
downloading will be retained).
B
• Indication when the maximum number (12) of channels have individual settings
When 12 channels have individual settings, and if a channel that has individual settings is currently selected [see Fig. 3-(a)], the settin
data for that channel are displayed on the screen, and they can be changed. When a channel that does not have individual settings is
currently selected, the indication will be as shown in Fig. 3-(b), and the setting data cannot be changed. (If you wish to set individual data
items for the currently selected channel, you must clear any specific-channel settings for one or more channels.)
[When 12 channels have individual settings, and if a channel that has individual settings is currently selected]
C
D
[When 12 channels have individual settings, and if a channel that does not have individual settings is
currently selected]
E
F
126
XV-DVR9H
1
2
3
4
5
6
7
8
7.1.9 AGING MODE
Notes:
Commands from the remote control unit are accepted during Aging mode.
If Aging mode is quit using the ESC key, indications on the FL display will return to normal display.
Cancel timer settings before entering Aging mode.
Set the recording rate beforehand. It cannot be changed during Aging mode.
A
* Be aware that all recorded data are deleted when the aging for the DVD-RW and HDD is executed.
Table 1: Aging for the DVD-RW and DVD-R
To enter
Aging mode
To quit
Aging mode
Function
Aging for the DVD-RW
Aging for the DVD-R
Press the DVD key to switch to DVD. Install a recordable
DVD-RW disc. After disc detection, press the ESC key then
the REP.B key on the remote control unit for servicing to enter
Aging mode.
Press the DVD key to switch to DVD. Install a recordable
DVD-R disc. After disc detection, press the ESC key then the
REP.B key on the remote control unit for servicing to enter
Aging mode.
Press the ESC key on the remote control unit for servicing to
quit Aging mode and return to Normal mode. This also results
in the following:
• If during recording: Recording is stopped.
• If during playback: Playback is paused.
• If during initialization: The unit stops after initialization is
finished.
• If the tray is being opened/closed: The unit stops after the
tray is opened/closed.
in the following:
During Aging mode, the following operations are repeated in
the order shown below.
1 The tray opens.
2 The tray closes.
3 Initialization
4 Recording for 60 minutes
5 Playback for 45 minutes
1 The tray opens.
2 The tray closes.
3 Recording for 1 minute
4 Recording pause for 6 minutes
5 Recording stops.
6 Playback for 1 minute
7 Playback pause for 6 minutes
8 Playback stops.
Note:
A continuous test of the above operations is possible for
approximately 23 hours.
B
C
3 Initialization is performed according to the setting specified After 2 the tray closes, disc detection is performed, and if 99
in "DVD-RW automatic initialization" (accessed by selecting
titles have already been registered, the unit stops there. The
"Unit Setting" then "Option").
number of loops is retained and indicated on the FL display.
An error indication is retained as an OSD.
During Aging, the number of loops is indicated on the FL
display, as shown below.
[AGING 0001]
[AGING 0001]
If an error is generated, the aging operation stops.
Note:
Indications on the FL display are retained, and this
information is also retained as an OSD.
Note:
D
Note:
Recording time depends on the recording rate set. For
example, if the recording rate is MN32, only up to 60 titles can
be registered. Check the setting for recording rate before
performing aging.
E
F
127
XV-DVR9H
5
6
7
8
1
A
2
3
4
3
4
Table 2: Aging for the HDD
Aging for the HDD
To enter
Aging mode
Press the HDD key to switch to HDD. Press the ESC key then
the REP.B key on the remote control unit for servicing to enter
Aging mode.
To quit
Aging mode
in the following:
• If during erasure of all memory data from the HDD, the unit
stops after all memory data have been erased.
B
1 Erasure of all the memory data from the HDD
2 Recording for 60 minutes
3 Playback for 60 minutes
[AGING 0001]
Function
Note:
C
D
E
F
128
XV-DVR9H
1
2
5
6
7
8
7.1.10 SETUP SEQUENCE
PT microcomputer
Tuner/FL microcomputer
Release the reset of
PT microcomputer.
System microcomputer (Initial Program Loader)
A
Connect the power cord.
System microcomputer starts up.
PT microcomputer starts up.
Initialization of the peripheral
circuit register and RAM, etc.
Drive microcomputer
starts up.
Tuner/FL microcomputer starts up.
Wait for 200 ms
No
LSI check ?
"LSI NG" displayed
on the FL display.
Yes
Release the reset of
PT microcomputer.
No
Flash check ?
Communication start with the
Tuner/FL microcomputer.
Yes
Has
command
arrived ?
Downloading through
RS232C required.
"MONITOR" displayed
on the FL display.
Yes
Waiting for
communication to be
established.
Initialization of the
peripheral circuit
register and RAM, etc.
No
Yes
B
ATA/ATAPI
command processing
Firmware stored in Flash memory
is developed in SD-RAM
expanding the compressed data.
DVD-R/RW Drive
No
Jumping to developed
firmware.
Communication
failed in succession
for five sec.
System microcomputer (Firmware)
FL display data
transmission start.
C
Communication start with the
Tuner/FL microcomputer.
"POWER ON" displayed
on the FL display.
Obtaining LD
temperature data from drive.
Is temperature below
59°C?
Clock displayed
on the FL display.
Power ON ?
Request for power off of
system-control computer made to
Tuner/FL microcomputer
No
System-control computer is turned off
(entering standby) following request
from Tuner/FL microcomputer
Yes
No
No
Is ID check of drive OK?
Yes
Power ON key information
∗1
Yes
Power ON ?
No
No
Is starting/ID check of
HDD OK?
Yes
D
"CPRM ERR" displayed on FL display
∗1
Yes
"HDD ERR" displayed on FL display
Power ON/Release the reset
Is disc in?
on the FL display.
Yes
Is disc valid?
on the FL display.
No
Waiting for
communication to be
established.
No
No
∗1: If both the drive ID check and
starting/ID check of HDD failed,
"CPRM ERR" is first displayed
on FL display.
Yes
E
Repair required?
No
Tray Open
Yes
Yes
Various information displayed
on the FL display.
Key input and channel data
transmitted to the system
controller.
And make displayed data (for
PT controller transmission) by
instructions from the system
controller, and switch a
channel.
Repair process
Playback
requested?
No
Yes
F
Stop
Playback
129
XV-DVR9H
5
6
7
8
1
2
3
4
7.1.11 DSP TROUBLE SHOOTING
A
• When a sound is not out in the surround mode with the digital signal input.
• Suppose C,R parts to be poor contact and that is not damaged.
• This shows failure analysis of DSP Assy.
Step 1
Step 2
IC8501-pin 21
Is output
signal "L"?
IC8901
No
Is 5V
inputting ?
Replace IC8501.
Yes
No
Check CN8003 and
other assemblies.
Yes
KN8102
B
Is 3.3V
outputting ?
Is the
screw is fastened
at KN8102
(earth point)?
No
No
Replace IC8901.
Yes
Tighten screws.
IC8902
Yes
Yes
Is 1.8V
outputting ?
CN8003
No
Replace IC8902.
Yes
Is connector
inserted tightly
?
C
No
Insert it tightly.
End
Yes
CN8007
Step 3
Is connector
inserted tightly
?
No
IC8702
Insert it tightly.
Yes
Pin 3
CN8011
D
Is connector
inserted tightly
?
No
Do perform
3V→5V conversion
for pin 17 ?
Insert it tightly.
No
Replace IC8702.
Yes
Yes
Pin 5
End
Do perform
3V→5V conversion
for pin 15 ?
E
No
Replace IC8702.
Yes
Pin 7
Do perform
3V→5V conversion
for pin 13 ?
No
Replace IC8702.
Yes
A
F
130
XV-DVR9H
1
2
3
4
5
6
7
A
8
B
A
Pin 5
Pin 9
Do perform
3V→5V conversion
for pin 11 ?
No
Do perform
5V→3V conversion
for pin 15 ?
Replace IC8702.
No
Replace IC8701.
Yes
Yes
Pin 7
Pin 12
B
Do perform
3V→5V conversion
for pin 8 ?
No
Do perform
5V→3V conversion
for pin 13 ?
Replace IC8702.
Replace IC8701.
Yes
Yes
Pin 14
Do perform
3V→5V conversion
for pin 6 ?
No
Pin 9
No
Do perform
5V→3V conversion
for pin 11 ?
Replace IC8702.
No
Replace IC8701.
C
Yes
Yes
Pin 16
Do perform
3V→5V conversion
for pin 4 ?
Pin 12
No
Do perform
5V→3V conversion
for pin 8 ?
Replace IC8702.
Yes
No
Replace IC8701.
Yes
Pin 18
Pin 14
D
Do perform
3V→5V conversion
for pin 2 ?
No
Do perform
5V→3V conversion
for pin 6 ?
Replace IC8702.
Yes
No
Replace IC8701.
Yes
Pin 16
End
Do perform
5V→3V conversion
for pin 4 ?
Step 4
IC8701
Replace IC8701.
E
Yes
Pin 18
Pin 3
Do perform
5V→3V conversion
for pin 17 ?
No
No
Replace IC8701.
Do perform
5V→3V conversion
for pin 2 ?
No
Replace IC8701.
Yes
Yes
End
B
F
131
XV-DVR9H
5
6
7
8
1
2
3
4
Step 5
A
IC8201
Is SPDIF signal coming?
(be different with Function)
Check
the DVD/CD
(pin 7).
No
Check the other assemblies.
(AF Assy or DVDM Assy)
No
Check the OPTICAL IN line between VIDEO ASSY and DSP ASSY.
(Optical Input Jack or Connectors)
Yes
B
Check
the OPTICAL IN
(pin 48).
Yes
Is
MCKO1 (pin 23)
outputting it?
No
Is input
signal of PDN
(pin 31) "H"?
No
Check the other assemblies.
(periphery of microcomputer on the AF Assy)
Yes
Yes
C
Do not
oscillate of XTO
(pin 29)?
Yes
Is
LRCK (pin 24)
outputting it?
No
No
Note:
X8201 oscillates
only in analog input.
Is output
signal of INT0
(pin 36) "H"?
No
Replace IC8201.
Yes
Replace IC8201.
Yes
D
Is
SDTO (pin 25)
outputting it?
No
Replace IC8201.
Yes
Is
BCK (pin 26)
outputting it?
No
Replace IC8201.
Yes
E
IC8502-pin2
Is
20MHz clock
outputting it?
No
Replace IC8502 or X8501.
Yes
End
F
132
XV-DVR9H
1
2
3
4
5
6
Step 6
7
8
Step 7
A
IC8401
IC8501
Pin 21
Pin 4
Does
a signal output
it?
No
Does
a signal output
it?
Replace IC8501.
No
Replace IC8401.
Yes
Yes
Pin 22
Pin 5
Does
a signal output
it?
No
Does
a signal output
it?
Replace IC8501.
B
No
Replace IC8401.
Yes
Yes
Pin 23
Pin 6
Does
a signal output
it?
No
Does
a signal output
it?
Replace IC8501.
No
Replace IC8401.
Yes
Pin 24
Yes
C
Pin 7
Does
a signal output
it?
Does
a signal output
it?
No
No
Replace IC8401.
Yes
Replace IC8501.
Pin 25
Yes
End
Does
a signal output
it?
No
Replace IC8401.
D
Yes
Pin 26
Does
a signal output
it?
No
Replace IC8401.
Yes
Pin 27
Does
a signal output
it?
No
E
Replace IC8401.
Yes
Pin 28
Does
a signal output
it?
No
Replace IC8401.
Yes
End
F
133
XV-DVR9H
5
6
7
8
1
2
3
4
7.1.12 DISASSEMBLY
A
Note 1 : Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures
described here are common.
Note 2 : For performing the diagnosis shown below, the following jigs for service are required:
• Jig cable : GGD1315 (×2)
Diagnosis of the MAIN Assy
1 Tray panel
1
2
3
4
5
B
2 Side panel L, R and Bonnet case
1
2
Press the STANDBY/ON button to turn on the power.
Press the 0 OPEN/CLOSE button to open the tray.
Remove the two screws.
Remove the five screws.
Remove the tray panel.
1 2
Press the 0 OPEN/CLOSE button to close the tray.
2 1
2
Press the STANDBY/ON button to turn off the power.
1 5
2
Rear view
3
Remove the side panel L and R.
C
2
Side panel L
3
3
2
Tray
4
2 4
Tray panel
Side panel R
How to open the tray when the power cannot be on
D
When the player cannot eject tray due to power failure or any
other reasons, use a long thin pole and push the emergency
eject hole under the tray panel to eject.
If the tray pops out a little, fully pull it out by a hand.
Tray
3
4
Remove the four screws.
4
E
4
Front
4
4
Front
Long thin pole
5
Emergency eject hole
Remove the bonnet case.
F
134
XV-DVR9H
1
2
3
4
5
6
7
3 Front panel section
1
8
4 HDD section
1
2
1
A
Remove the KEY R Assy by removing the two screws.
1
HDD
1
HDD
1
2
2
Bottom view
B
Front panel section
KEY R Assy
2
3
3
Unhook the two hooks.
HDD
Remove the front panel section
C
Front
2
3
3
2
4
5
Remove the one screw.
Remove the HDD with HDD base.
D
4
5
Front panel section
3
E
HDD
F
135
XV-DVR9H
5
6
7
8
1
2
3
5 MAIN Assy
4
6 JACK Assy
A
HDD
1
2
3
Remove the seven screws.
Remove the wires from Wire Saddle.
Remove the JACK Assy and TRADE Assy.
1
1
2
3
1
2
3
B
Disconnect the one connector.
Stand the MAIN Assy.
1
1
2
2
CN5102
3
1
1 1
1
4
5
Connect the jig cable.
6
Arrange the unit as shown in the photo below.
Insert the insulation sheet between the JACK Assy
and DRIVE Assy R7.
C
4
5
Insulation sheet
2
2
Diagnosis
Jig cable
(GGD1315)
MAIN Assy
Rear view
D
4
Insert the insulation sheet between the MAIN Assy
and HDD.
5
JACK Assy
TRADE Assy
Diagnosis
4
HDD
Insulation sheet
E
Caution :
Main IC (IC1001) on the MAIN Assy generate heat
to arround 80 degrees. Be careful when works.
IC1001
F
MAIN Assy
136
XV-DVR9H
1
2
3
4
5
6
7
7 CONTROL Assy
1
2
8
8 DRIVE Assy R7 (DVD-R/RW Writer)
1
2
3
4
Remove the seven screws.
A
Disconnect the two connectors.
Remove the three acetate tapes.
Remove the DRIVE Assy R7.
3
Acetate tape
2
2
1
1
2 2
1
2 2
1
2 2
B
4
3
3
Acetate tape
3
Acetate tape
C
DRIVE Assy R7
3
4
Stand the CONTROL Assy.
D
Diagnosis
Rear Panel
E
CONTROL Assy
F
137
XV-DVR9H
5
6
7
8
1
2
3
4
PCB Location
A
I
B
REG Assy
Q
POWER SUPPLY
Unit
H
DSP Assy
G
C
CONTROL
Assy
JACK Assy
L
N
O
A
KEY L Assy
M
FRONT JACK Assy
E
ATWB Assy
TRADE Assy
IR Assy
TV MODULE
Assy
C
B
TV CONNECT
Assy
D
MAIN Assy
D
DRIVE Assy R7
HDD
P
J
KEY R Assy
DISPLAY Assy
E
F
ATHB Assy
K
LED Assy
F
138
XV-DVR9H
1
2
3
4
5
6
7
8
Cleaning the pickup lens
A
1
2
Remove the mecha angle L by removing the two screws.
3
Remove the bottom cover by removing the four screws.
Remove the mecha angle R by removing the two screws.
Bottom cover
3
3
3
1
1
2
Front side
3
3
Mecha angle L
B
Front side
Bottom view
2
Mecha angle R
C
4
5
6
Remove the front bezel by unhooking the two hooks.
Remove the one screw.
Remove the top cover.
Top cover
5
D
6
E
Front bezel
4
4
4
Hook
Hook
F
139
XV-DVR9H
5
6
7
8
1
2
3
4
3
4
A
7
8
Remove the clamper section.
7
7
8
B
7
7
C
Clamper section
9
Clean the pickup lens.
Before shipping out the product, be sure to clean the
following positions by using the prescribed cleaning tools :
D
Cleaning liquid
Cleaning paper
: GEM1004
: GED-008
Pickup lens
E
F
140
XV-DVR9H
1
2
5
6
7
8
7.2 PARTS
7.2.1 IC
A
• The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams.
List of IC
PEG014A-K, PDC117B-K, TDA9818TS, LA73026AV, RS5C372A, LC75342M, LA73033M, AK5357VT,
PST3428U, PST3809U, M65673WG-A, UPD72852AGB-8EU, UPD72893AGD-LML
PEG014A-K (CONTROL ASSY: IC801)
• TUFL Microcomputer
Pin Function
No.
Pin Name
Signal Name
I/O
Function
1
P95/ANEX0/CLK4
XSCK_TTOA
O
Communication line of AMP controller (clock)
2
P94/DA1/TB4in
SYNC
I
C-Sync of input video (for Auto-Rec video judgement)
3
P93/DA0/TB3in
AVLINKIN
I
Input line of NexTViewLink
4
P92/TB2in/Sout3
IR
I
Pulse input of remote control (no input signal for system product)
5
P91/TB1in/Sin3
J_CLOCK
I
Input audio for Just clock (pulse input of tuner audio)
6
P90/TB0in/CLK3
SYNCAFT
I
C-Sync of input video
7
BYTE
BYTE
I
Pull-down
8
CNVss
PGM
I
Communication line L: Normal, H: Download
B
9
P87/XCin
NC
10
P86/XCout
LATCH_D
(O)
O
Communication line of AMP controller (Latch)
11
-RESET
XRESETIN
I
Microcomputer reset L: Reset, H: Normal
12
Xout
XOUT
O
13
Vss
GND
−
14
Xin
XIN
I
15
Vcc
VCC
−
Power supply
16
P85/-NMI
NMI
I
Pull-up
17
P84/-INT2
JOGA
I
Phase VOL input
18
P83/-INT1
SLICEONFB
I
Feedback from SLICEON pin
19
P82/-INT0
XINTRA
I
Alarm/interval interruption
20
P81/TA4in
LED_HDD
(O)
HDD LED LED ON with H active at HDD (NC)
21
P80/TA4out
LED_DVD
(O)
DVD LED LED ON with H active at HDD (duty 100%) (NC)
22
P77/TA3in
PSAVE_MUTE
O
For noise suppression when controlling SCART power (L: Mute ON, H: Mute OFF)
23
P76/TA3out
FANPWM
O
FAN power control High speed: H fixed, Low speed: 39kHz, Stop: L fixed (NC)
24
P75/TA2in
GLINK IN
(O)
(NC)
25
P74/TA2out
GLINK OUT
(O)
(NC)
26
P73/-CTS2/-RTS2/TA1in
NC
(O)
27
P72/CLK2/TA1out
AVLINKOUT
28
C
Ground
D
O
Output line of NextViewLink
P71/RxD2/SCL/TA0in/TB5in SCL
I/O
I2C communication (clock) Nch open-drain
29
P70/TxD2/SDA/TA0out
SDA
I/O
I2C communication (data) Nch open-drain
30
Vss2
GND
−
31
LP2
LP2
O
32
LP3
LP3
O
33
LP4
LP4
O
34
Vdd2
VDD2
−
35
M2
M2
I
Mode switch L: Normal, H: Download
36
M1
M1
I
Pull-down
37
P11/SLICEON
SLICEON
O
Slicer operating signal
38
P67/TxD1
TXD
O
Communication line for firmware download/monitor
39
P66/RxD1
RXD
I
E
Ground
Power supply
F
141
XV-DVR9H
5
6
7
8
1
A
B
C
D
E
No.
Pin Name
2
Signal Name
3
I/O
4
Function
40
P65/CLK1
SCLK
(O)
41
P64/-CTS1/-RTS1/CLKS1
BUSY
O
42
P63/TxD0
SSTTOM
O
System controller communication line (Tuner → Main)
43
P62/RxD0
SSMTOT
I
System controller communication line (Main → Tuner)
44
P61/CLK0
SCK
I
System controller communication line (clock)
45
P60/-CTS0/-RTS0
HSTTOM
O
Tuner → System handshake
46
P57/-RDY/CLKout
DLCONT
O
Voltage supply SW of FLASH-ROM writing L=Download, H=Normal operation
47
P56/ALE
WRT
O
Write signal
48
P55/-HOLD
SDAEEP
I/O
SDA line for EEPROM
49
P54/-HLDA
SCLEEP
O
SCL line for EEPROM
50
P53/BCLK
VOLCE
O
Communication line CE
51
P52/-RD
VOLDATA
O
Communication line DATA
52
P51/-WRH/-BHE
VOLCLK
O
Communication line CLK
53
P50/-WRL/-WR
DLCE
I
Signal for serial I/O mode selection (10k ohm pulled-up)
54
P47/-CS3
NC
(O)
55
P46/-CS2
NC
(O)
56
P45/-CS1
NC
(O)
57
P44/-CS0
BLANK
I
BLANK signal input
58
P43/A19
XTHROU
O
Through control of SCART1/2
59
P42/A18
NC
60
P41/A17
EXTRGB
O
61
P40/A16
SWVION
O
Independent source SW for video I/O output circuit L=OFF, H=Power ON
62
P37/A15
SWSTBY
O
Standby mode of video input selector L=Normal, H=Standby mode
63
P36/A14
NC
64
P35/A13
BS15SRT
I
65
P34/A12
SCTHRU
O
66
P33/A11
NC
(O)
67
P32/A10
NC
(O)
L=Through, H=Connect to TV
(O)
(O)
SCART loop through control during power OFF L=Through during power OFF, H=Normal
68
P31/A9
SDET2
I
S terminal detection of Video input 2
69
Vcc
VCC
−
Power supply
70
P30/A8
NC
I
71
Vss
GND
−
Ground
72
P27/A7
DDL_INFO1
O
DISC DOWNLOAD information
73
P26/A6
DDL_INFO2
O
74
P25/A5
DDL_INFO3
O
75
P24/A4
NC
76
P23/A3
P_SAVEBS
77
P22/A2
NC
(O)
78
P21/A1
NC
(O)
79
P20/A0
P_CONT
O
System Power ON L=Standby, H=Power ON
80
P17/D15/-INT5
HSATOT
I
Amp → Tuner handshake
(O)
O
RF through output switch L=Through OFF, H=Through ON
F
142
XV-DVR9H
1
2
3
4
5
No.
Pin Name
6
Signal Name
7
I/O
8
Function
A
81
P16/D14/-INT4
HSMTOT
I
SYS → Tuner handshake
82
P15/D13/-INT3
DCTRI
I
Change detection of audio condition
83
P14/D12
NC
84
P13/D11
SU/SAPID
85
P12/D10
86
P11/D9
87
P10/D8
LDASH
O
ColorSystem distinction signal L=Others, H=L'
88
P07/D7
STBYQ
O
EU multiplex decoder standby mode L=Standby, H=Power ON
89
P06/D6
LM/
O
ColorSystem distinction signal L=Others, H=L/L' (for EU); M/N (for IBD)
90
P05/D5
I/BG
O
ColorSystem distinction signal L=Others, H=I
91
P04/D4
XP_SAVE
O
Power save control (SCART) L=Power save (thru OFF), H=Normal (thru ON)
92
P03/D3
TUON
O
Tuner power L=Standby, H=Power ON
93
P02/D2
NC
94
P01/D1
RSTCTL
O
Reset signal mask from the system controller
95
P00/D0
XRST_TTOA
O
Reset output to Amp controller
96
P107/AN7/-KI3
MODEL1
A/D IN Input for destination judgment
97
P106/AN6/-KI2
MODEL2
A/D IN Input for destination judgment
98
P105/AN5/-KI1
AGC
A/D IN Field intensity detection
99
P104/AN4/-KI0
FUNC
A/D IN Function signal input
100 P103/AN3
KEY2
A/D IN Main unit key input (No use)
101 P102/AN2
KEY1
A/D IN Main unit key input (No use)
102 P101/AN1
C/N
A/D IN
103 Avss
GND
−
104 P100/AN0
AFT
105 VREF
VREF
−
Reference voltage
106 AVcc
AVCC
−
Power supply
(O)
I
J: Bilingual detection, US: SAP detection
ST/STID
I
J: Stereo detection, US: Stereo detection (STID)
XRESET
O
System Reset output L=Reset, H=Normal
B
(O)
C
Ground
A/D IN AFT voltage input
107 P97/-ADTRG/Sin4
SSATOT
I
Communication line of Amp controller (AMP → Tuner)
108 Vdd1
VDD1
−
Power supply
109 SYNCIN
SYNCTEXT
I
Video input for sync. sep.
110 SVREF
SLICE
I
Slice level input
111 Vss1
GND
−
Ground
112 Vdd3
VDD3
−
Power supply
113 CVIN1
CVIN1
I
Video input for teletext
114 Vss3
GND
−
Ground
115 FSCIN
FSCIN
I
Fsc input
116 P96/ANEX1/Sout4
SSTOA
O
Communication line of Amp controller (Tuner → AMP)
D
E
F
143
XV-DVR9H
5
6
7
8
1
2
3
4
PDC117B-K (CONTROL ASSY: IC5501)
• PT Microcomputer
A
Pin Function
No.
B
C
D
E
Pin Name
Signal Name
I/O
Function
1
PA3
ATT6dB
O
Control ATT 6dB for AUDIO IN
2
PA4
ATT10dB
O
Control ATT 10dB for AUDIO IN
3
PA5
NC
O
4
P70/INT0/T0LCP/AN8
XPDOWNDET
I
5
P71/INT1/T0HCP/AN9
XWMUTE
O
6
P72/INT2/T0IN
RDSCLK
I(O)
7
P73/INT3/T0IN
REMOCON
I
REMOCON signal input(Interruption)
8
RES#
XRESET
I
Microcomputer reeset input
9
XT1/AN10
XT1
−
(When this port don't use, please connect VDD)
Power failure detection input(Interruption)
WIRE LESS MUTE request
Clock input from RDS decoder (without RDS: Low output)
10
XT2/AN11
XT2
−
(When this port don't use, please set open)
11
VSS1
VSS1
−
Ground
12
CF1
CF1
−
13
CF2
CF2
−
14
VDD1
VDD1
−
Power supply
15
P80/AN0
SIMUKE
I
Destination distinction input
16
P81/AN1
NC
O
17
P82/AN2
NC
O
18
P83/AN3
KEY1
I
Key1 input
19
P84/AN4
KEY2
I
Key2 input
20
P85/AN5
NC
O
21
P86/AN6
(TEMP)
O
22
P87/AN7
XPROTECT
I
Protection and Fan Error detection input
23
P10/SO0
DSPDI
O
Data output to DSP (MOTOROLA) and DIR
24
P11/SI0/SB0
DSPDO
I
Data input from DSP (MOTOROLA)
25
P12/SCK0
DSPCLK
O
Clock output to DSP (MOTOROLA) and DIR
26
P13/SO1
FLCS
O
Chip enable for FL driver
27
P14/SI1/SB1
FLDAT
O
Data for FL driver & LED DRIVER
28
P15/SCK1
FLCLK
O
Clock for FL driver & LED DRIVER
29
P16/T1PWML
LATCH
I
DVDRW LATCH input
30
P17/T1PWMH/BUZ
HPDET
I
Detect to insert headphone
31
PE0
XRDY
O
DVDRW XRDY output
32
PE1
XAVOUTMUTE
O
AV OUTPUT AUDIO MUTE ON/OFF
33
PE2
STEST
I
Set SERVICE TEST MODE for service (Perform the LINE TEST MODE with
remote control unit)
34
PE3
UTEST
I
Set UNITCHECK for checker
35
PE4
XHPMUTE
O
HP MUTE ON/OFF
36
PE5
XRECMUTE
O
AUIDIO OUTPUT MUTE ON/OFF
37
PE6
MUTEMASK1
O
EURO SCART AV1 AUDIO OUT MUTE MASK
38
PE7
MUTEMASK2
O
EURO SCART AV2 AUDIO OUT MUTE MASK
39
VSS4
VSS4
−
Ground
40
VDD4
VDD4
−
Power supply
F
144
XV-DVR9H
1
2
3
4
5
No.
Pin Name
6
Signal Name
7
I/O
8
Function
41 PF0
LED BLUE
O
BLUE LED
42 PF1
LED AMB
O
AMBER LED
43 PF2
RYR
O
REAR RELAY ON/OFF
44 PF3
RYFSC
O
FRONT/SW/CENTER RELAY ON/OFF
45 PF4
XFLRST
O
Reset for FL driver
46 PF5
FLPOW
O
FL power sw control
47 PF6
(SYSPOW)
O
48 PF7
DTSDMIX
O
Cntrol of gain-up for dts down-mix
49 SI2P0/SO2
SO
O
DVDRW data output (AMP side output)
50 SI2P1/SI2/SB2
SI
I
DVDRW data input (AMP side input)
51 SI2P2/SCK2
XSCK
I
DVDRW clock input
52 SI2P3/SCK20
SWFMIX
O
Control for subwoofer mix
53 PWM1
NC
−
54 PWM0
FANCONT
O
fan control1
55 VDD2
VDD2
−
Power supply
56 VSS2
VSS2
−
Ground
57 P00
DIRERR
I
LOCK/UNLOCK from DIR
58 P01
DIRDO
I
Data input from DIR
59 P02
DSPHREQ
I
Error detection from DSP (MOTOROLA)
60 P03
DECMUTE
I
Detection of 1stDSP boot success from DSP MODULE
61 P04
XTL0
O
Selection X'tal to DIR
62 P05/CKO
XDSPMUTE
O
MUTE requeat to DSP MODULE
63 P06/T6O
DSPSS
O
Slave selection to DSP (MOTOROLA)
64 P07/T7O
XDSPRST
O
RESET to DSP (MOTOROLA) MODULE
65 P20/INT4/T1IN
DSPMODE
O
MODE selection(ROM/RAM) to DSP(MOTOROLA)
66 P21/INT4/T1IN
DIRRST
O
Reset to DIR
67 P22/INT4/T1IN
DIRCS
O
Chip select to DIR
68 P23/INT4/T1IN
XSWDET
I
SW DETECT
69 P24/INT5/T1IN
(FANERR)
I
(STANDBY) Fan Error detection input
70 P25/INT5/T1IN
(FANCONT)
O
fan control1
71 P26/INT5/T1IN
BEATCUT2
O
BEATCUT Control 2
72 P27/INT5/T1IN
DLINF1
I
Download Information1
73 P30/PWM4
DLINF2
I
74 P31/PWM5
DLINF3
I
75 P32/UTX1
SR+Tx
O
UART Tx of SR+ function
76 P33/URX1
SR+Rx
I
UART Rx of SR+ function
77 P34/UTX2
BEATCUT1
O
BEATCUT Control 1
78 P35/URX2
DIGSEL
O
SW for Digital 1/2 select
79 P36
SWPOW
O
SW power sw control
80 PB7
TXCLK
O
Clock for tuner LSI
81 PB6
TXODATA
O
Data for tuner LSI
A
B
C
D
E
F
145
XV-DVR9H
5
6
7
8
1
A
B
C
No.
Pin Name
2
Signal Name
3
I/O
4
Function
82 PB5
WSEL
O
WIRE LESS OUTPUTSELECT
83 PB4
TXCE
O
Chip enable for tuner LSI
84 PB3
RDSPOW
O
Control power supply of RDS (L: POWER ON)
85 PB2
XSWPOWDET
I
SW POWER DETECT (L: SW POWER DETECT)
86 PB1
RDSDATA
I(O)
87 PB0
TXIDATA
I
Input data from tuner LSI
88 VSS3
VSS3
−
Ground
89 VDD3
VDD3
−
Power supply
90 PC7
XMUTEC
O
Cch MUTE ON/OFF
91 PC6
INPUTSELB
O
AUDIO INPUT SELECT B
92 PC5
INPUTSELA
O
AUDIO INPUT SELECT A
93 PC4
DIMMER
O
Control for DIMMER
94 PC3
XSYSMUTE
O
Control mute of system
95 PC2
(VOLMUTE)
O
(Mute for E-vol IC) (STANDBY)
96 PC1
VOLCLK
O
Clock for E-vol IC/HP-vol IC/Wireless-vol IC
97 PC0
VOLDATA
O
Data for E-vol IC/HP-vol IC/Wireless-vol IC
98 PA0
FLASHE/D
−
for FLASH writing
Input RDS data (without RDS : Low output)
99 PA1
FLASHDO
−
for FLASH writing
100 PA2
FLASHCLK
−
for FLASH writing
D
E
F
146
XV-DVR9H
1
2
3
4
5
6
SIF2 24
SIF1 23
VIF2 2
VIF1 1
VIF
AGC
TUNER
AGC
7
STD
CSAGC
standards
selection
switch
3(1)
INTERCARRIER
MODE SWITCH
5
SIF
AGC
SIF AMPLIFIER
VIF AMPLIFIER
4
15(1)
22
TDA9818
FPLL
VCO
TWD
LADJ VCO2
7(1) 19
VCO1
18
AFC
17
13
FMin
QSS
mute
switch
Vde-em
9
VP
21
GND
20
Cde-em
10
MHA663
8 AF
audio
SOUND video
TRAP 1 V (p-p)
1.1 V (p-p)
16 CVBS
CDEC
11
VOLTAGE
REFERENCE
FM-PLL
DEMODULATOR
VIDEO
DEMODULATOR
AND AMPLIFIER
AFC
DETECTOR
12
5.5 MHz
QSS MIXER
INTERCARRIER MIXER
AM DEMODULATOR
TPLL
6
6
intercarrier
mode
SIF
SAW
VIF
SAW
TAGC 14
CVAGC
CBL
TOP
2 × fpc
L/L accent switch
and adjust
5
7
8
• VIF/SIF IC
TDA9818TS (TV MODULE ASSY : IC302)
A
B
C
D
E
F
XV-DVR9H
8
147
1
2
3
4
A
PIN FUNCTION
SYMBOL
B
C
D
PIN LAYOUT
PIN
DESCRIPTION
VIF1
1
VIF differential input signal voltage 1
VIF2
2
VIF differential input signal voltage 2
STD
3
standards selection switch; note 1
CVAGC
4
VIF AGC capacitor
CSAGC
5
SIF AGC capacitor
VIF1 1
24 SIF2
TPLL
6
PLL filter
VIF2 2
23 SIF1
LADJ
7
L/L accent switch and adjust
STD 3
22 TOP
AF
8
audio output
Vde-em
9
de-emphasis output
Cde-em
10
de-emphasis input
CDEC
11
decoupling capacitor
TPLL 6
QSS
12
single reference QSS/intercarrier
output voltage
LADJ
FMin
13
sound intercarrier input voltage
TAGC
14
tuner AGC output
CBL
15
black level detector
CVBS
16
composite video output voltage
AFC
17
AFC output
VCO1
18
VCO1 resonance circuit
VCO2
19
VCO2 resonance circuit
CVAGC 4
21 VP
CSAGC 5
20 GND
7
AF 8
20
ground
21
supply voltage
TOP
22
tuner AGC takeover point adjust
SIF1
23
SIF differential input signal voltage 1
SIF2
24
SIF differential input signal voltage 2
18 VCO1
17 AFC
16 CVBS
Cde-em 10
15 CBL
QSS 12
VP
19 VCO2
Vde-em 9
CDEC 11
GND
TDA9818
14 TAGC
13 FMin
E
F
148
XV-DVR9H
1
2
3
4
5
6
7
8
LA73026AV (JACK ASSY : IC501)
• Dual SCART Interface IC
A
Pin Function
No.
1
2
10
11
15
16
33
34
36
37
3
4
19
35
Pin Name
AIN1R
AIN1L
AIN2R
AIN2L
AIN3R
AIN3L
AIN4L
AIN4R
AIN5L
AIN5R
EXTCTL1
EXTCTL2
EXTCTL3
EXTCTL4
5
VOUT
6
17
27
32
38
7
13
18
23
28
GND
GND
EXT-75ΩDR-GND
DEC-75Ω-GND
GND
VIN1
VIN2
VIN3
VIN4
VIN5
8
DC Voltage
5.58V
Function
Audio input terminal
B
2.5mA, ON
→0.75V
General purpose output
Opencollector
OFF
→OPEN
1.10V
Video output terminal
Push-pull output/Low-impedance
0V
C
1.8V
Video input terminal
Sync-tip clamp
Input/Hi-impedance
PWRSAV
0.2V
Power save mode select pin
OPEN : L
9
AUMUTE
0.05V
Control terminal for audio mute
OPEN : L
12
REFFIL
4.94V
Terminal for Ref_DC ripple removing
14
VCC12
20
FSSOUT
21
DATA
Confirmed to IIC BUS. Data input terminal
22
CLOCK
Confirmed to IIC BUS. Clock input terminal
24
25
26
VCC5A
VOUT75A
VOUT75B
29
30
31
42
43
VCC5B
AOUT2L
AOUT2R
AOUT3L
AOUT3R
39
40
AOUT1L
AOUT1R
41
44
PWRMUTE1
PWRMUTE2
Vcc for audio
H : Vcc-0.5V
M : 6V
L : 0V
D
FSS control terminal
Output H, M, L
3 values with serial control
Control Vcc for Video
1.10V
Video driver output terminal
Always VCC for Video
4.91V
4.91V
0V
Audio output terminal
E
Audio output terminal
Output terminal of audio muting
F
149
XV-DVR9H
5
6
7
8
1
2
3
4
3
4
Block Diagram
A
B
C
D
E
F
150
XV-DVR9H
1
2
5
6
7
8
RS5C372A (CONTROL ASSY : IC802)
• Real Time Clock IC
A
Block Diagram
32kHz Output
Control
Comparator_A
Alarm_A Register
(WEEK, MIN, HOUR)
Comparator_B
Alarm_B Register
(WEEK, MIN, HOUR)
8 VDD
Time Counter
(SEC, MIN, HOUR, WEEK, DAY, MONTH, YEAR)
4 VSS
Address
Decoder
2 SCL
OSCIN 7
OSC
Driver
Correction
DIV
OSCOUT 6
OSC
Detect
B
Address
Resister
I/O
Control
/INTRA 5
Interrupt Control
Shift Resister
3 SDA
/INTRB 1
C
Pin Function
No.
Pin Name
I/O
Function
1
/INTRB
O
Interruption output B
The output of 32.768kHz (in 32768Hz crystal use), cycled interrupt for CPU, or output alarm interrupt
(ALARM_B). This pin output 32.768kHz when activated power from 0V.
Nch open drain output.
2
SCL
I
Shift clock input
Synchronize with this clock, and input and output data from a SDA terminal.
Exceed VDD, and can input to 6V.
3
SDA
I/O
4
VSS
−
Ground pin
5
/INTRA
O
Interruption output A
Cycled interrupt for CPU, or output alarm interruption (ALARM_A, ALARM_B).
This pin becomes an OFF state when activated power from 0V. N ch open drain output.
6
OSCOUT
O
Oscillation circuit output
7
OSCIN
I
Oscillation circuit input
8
VDD
−
Positive supply input
Serial input and output
Synchronize with SCL, and input and output writing data or readout data.
Exceed VDD, and can input to 6V. Nch open drain output in the output.
D
Connect a crystal resonator of 32.768kHz or 32.000kHz between OSCIN and
OSCOUT, and constitute oscillation circuit.
(component parts of oscillation circuit except crystal resonator have it built-in.)
E
F
151
XV-DVR9H
5
6
7
8
1
2
3
4
LC75342M (JACK ASSY : IC601)
• Electric Volume IC
A
LSELO
LIN
LTRE
LBASS1
LBASS2
LOUT
Block Diagram
10
9
8
7
8
5
L4 11
L3 12
L2 13
B
4 TEST
LVref
Control
Circuit
L1 14
3 VSS
2 CE
NC 15
Logic
Circuit
NC 16
CCB
Interface
1 DI
30 CL
R1 17
Control
Circuit
29 VDD
RVref
28 Vref
R2 18
27 NC
R3 19
RTRE
24
25
26
ROUT
23
RBASS2
22
RBASS1
21
RIN
C
RSELO
R4 20
Pin Function
No.
1
Pin Name
DI
Function
No.
Serial data input for control
Chip enable pin
Data are written in the internal latch by a timing
of "H" → "L", and each analog switch works.
Data transfer is enabled by "H" level.
Pin Name
16
NC
17
R1
Function
Not connected
2
CE
3
VSS
Ground pin
18
R2
4
TEST
Pin for electronic volume test
Set to VSS electric potential.
19
R3
5
LOUT
Volume and equalizer output pin
20
R4
6
LBASS2
RSELO
Input selector output pin
7
LBASS1
Capacitor and resistor connection pins for bus
bandpass filter
21
22
RIN
Volume and equalizer input pin
8
LTRE
Capacitor connection pin for treble bandpass
filter
23
RTRE
Capacitor connection pin for treble bandpass
filter
9
LIN
Volume and equalizer input pin
24
RBASS1
10
LSELO
Input selector output pin
25
RBASS2
Capacitor and resistor connection pins for bus
bandpass filter
11
L4
26
ROUT
Volume and equalizer output pin
12
L3
27
NC
Not connected
28
Vref
0.5XVDD voltage generation block
29
VDD
Power supply pin
30
CL
Clock input pin for control
D
E
13
L2
14
L1
15
NC
Input signal pins
Not connected
Input signal pin
F
152
XV-DVR9H
1
2
3
4
5
6
7
8
LA73033M (JACK ASSY : IC701)
• Video selector and Video driver
A
Block Diagram
B
C
D
E
F
153
XV-DVR9H
5
6
7
8
1
2
3
4
AK5357VT (MAIN ASSY : IC3101)
• 96kHz 24 bit ∆∑ ADC
A
Pin Arrangement (Top view)
Block Diagram
VA
6
AINR
1
16
CKS0
AINL
2
15
CKS2
CKS1
3
14
DIF
VCOM
4
13
PDN
AGND
5
12
SCLK
VA
6
11
MCLK
VD
7
10
LRCK
DGNS
8
9
SDTO
B
AGND
5
VD
7
DGND
8
MCLK
11
Clock
Divider
AINL 2
∆∑
Modulator
Decimation
Filter
10 LRCK
AINR 1
∆∑
Modulator
Decimation
Filter
12 SCLK
VCOM 4
Voltage
Reference
Serial I/O
Interface
15
3
16
13
14
CKS2
CKS1
CKS0
PDN
DIF
Pin Function
No.
C
D
Pin Name
I/O
Function
1
AINR
I
R ch analog input
2
AINL
I
L ch analog input
3
CKS1
I
Mode select 1
4
VCOM
O
Common voltage output, bias voltage of VA/2 and ADC input
5
AGND
−
Analog ground
6
VA
−
Analog power supply, 2.7 to 5.5V
7
VD
−
Digital power supply, 2.7 to 5.5V
8
DGND
−
Digital ground
9
SDTO
O
Audio serial data output, outputs "L" in the power down mode.
10
LRCK
I/O
Channel clock I/O, outputs "L" by master mode in the power down mode.
11
MCLK
I
12
SCLK
I/O
13
PDN
I
Power down mode
Master clock input
Audio serial data clock, outputs "L" by master mode in the power down mode.
"H": power up, "L": power down
14
DIF
I
Audio interface format, "H" : 24 bit I2S compatibility, "L" : 24 bit MSB justify
15
CKS2
I
Mode select 2
16
CKS0
I
Mode select 0
E
F
154
XV-DVR9H
1
2
3
4
9 SDTO
5
6
7
8
PST3428U (MAIN ASSY : IC4003)
• Reset IC
A
Block Diagram
VOUT
1
4
VSS
VDD
2
3
NC
VDD 2
1 VOUT
Vref
B
VSS 4
Pin Function
No.
Pin Name
Function
1
VOUT
Reset signal output
2
VDD
Power supply / voltage detection
3
NC
Not connected
4
VSS
VSS
C
PST3809U (MAIN ASSY : IC4005)
• Reset IC
D
Block Diagram
OUT
1
4
GND
VDD
2
3
NC
VDD 2
1 OUT
Vref
GND 4
E
Pin Function
No.
Pin Name
Function
1
OUT
Reset signal output
2
VDD
Power supply / voltage detection
3
NC
Not connected
4
GND
Ground
F
155
XV-DVR9H
5
6
7
8
1
2
3
4
M65673WG-A (MAIN ASSY : IC1001)
• Signal Processing IC for DVD Recorder
A
A B C D E
F G H
J
K
L M N P R T U V W Y AA AB AC AD AE AF AG AH
1
2
3
4
5
B
6
7
8
9
10
11
12
13
14
15
C
16
17
18
19
20
21
22
23
24
25
D
26
27
28
I/O buffer list
Buffer Name
E
F
Main Function
Remarks
PDIDGZ
Input buffer (5V tolerant)
PDUDGZ
Input buffer (5V tolerant), pull-up
PDDDGZ
Input buffer (5V tolerant), pull-down
PDO04CDG
Output buffer, 4mA
PDO08CDG
Output buffer, 8mA
PDO0204DGZ
Output buffer, 2/4mA
PDO0406DSGZ
For SDRAM IF
PDO0406DSGZ×2
For SDRAM IF
PDT0204DGZ
3 state output buffer, 2/4mA
PDB04DGZ
Bidirectional buffer, 4mA
PDB08DGZ
Bidirectional buffer, 8mA
PDB0204DGZ
Bidirectional buffer, 2/4mA
PDB0406DSGZ
Bidirectional buffer, 4/6mA
156
For SDRAM IF
XV-DVR9H
1
2
3
4
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
5
C
D
E
AT1INTRQ
AT1CS[1]
AT1CS[0]
6
AT1IORDY
AT1DMARQ
AT1DATA4]
AT1DATA[9]
7
ARADRS[2]
ARADRS[3]
ARADRS[6]
ARADRS[4]
SRCDATAI
B
ARADRS[8]
ARADRS[7]
ARADRS[5]
VDD
A
C
DVLRCK
SRCBCKO
SRCLRCKI
ARADRS[1]
ARADRS[11] ARADRS[9]
ARCS[0]
D
DVADATA
SPDIFO
SRCLRCKO
SRCBCKI
E
LRCKI
BCKI
DVBCK
SRCDATAO
ARADRS[0] ARADRS[10]
ARCS[1]
ARCAS
ARDATA[7]
ARDATA[5]
ARDATA[2]
ARDATA[0]
DVAMCLKI
PLL1AVDD
VDD
AT2ADR[1]
AT2DMACK
AT2DATA[3]
AT2DATA[9]
VDD
EADRS[2]
EADRS[4]
EADRS[5]
VDD3
EDATA[30]
EDATA[31]
EDATA[3]
DVDADT[1]
LRCKO
DVDADT[5]
DVDADT[6]
ACMOD[1]
ADATAI
DVDADT[7]
F
ADATAO
DVDADT[3]
ACMOD[0]
SPDIFI
G
H
DVDADT[2] DVDAADR[1]
DVDADT[0]
BCKO
VDD3
GND
EADRS[6]
EADRS[10]
EBS[1]
VDD
VDD3
GND
VDD
VDD2
GND
VDD
VDD3
GND
VDD
VDD3
GND
VDD
VDD3
GND
VDD
VDD3
GND
EADRS[7]
EADRS[1]
EDATA[17]
H
EBS[0]
G
EADRS[0]
F
EDATA[16]
J
K
VDD3
VDD3
ECLKO
ECLKEN
ECAS
EWE
EDQM
L
VDD
VDD
EDATA[10]
EDATA[9]
EDATA[8]
EDATA[7]
EDATA[6]
J
SCICS[0]
SCICS[1]
DVDAACK
DVDAREQ
K
SCICLK[0]
SCICLK[1]
VDD
SCIDATA[1]
L
DDATA[0]
SPICLK
SPIDATAI
SPICS
DVDADT[4] DVDAADR[0] SCIDATA[0]
VDD
GND
EADRS[9]
EADRS[8]
EADRS[11]
ECS
ERAS
EDATA[14]
VDD3
GND
GND
GND
GND
GND
GND
VDD3
DDATA[11]
DDATA[12]
DDATA[13]
DDATA[3]
DDATA[4]
N
EDATA[12]
GND
GND
GND
GND
GND
GND
GND
GND
SPIDATAO
DDATA[14]
DDATA[15]
DDATA[2]
DDATA[1]
M
DVSSAD8
EDATA[2]
EDATA[13]
EDATA[5]
EDATA[11]
AVSSAD8
EDATA[1]
EDATA[4]
P
P
DDATA[5]
DDATA[6]
DDATA[10]
DDATA[9]
DDATA[8]
VDD
GND
GND
GND
GND
GND
GND
VDD
EDATA[15]
DVDDAD8
AVDDAD8
N
EDATA[0]
M
EDATA[3]
R
R
DDATA[7]
DDQM[0]
DWE
DDQM[1]
DCLKO
GND
GND
GND
GND
GND
GND
GND
GND
AVSSAD8
AVDDAD8
CRIN
GIN
BG8
T
T
DCAS
DRAS
DCS
DADRS[11]
DADRS[9]
VDD3
GND
GND
GND
GND
GND
GND
VDD2
DVDDAD10
AVSSAD8
CIN
VRT8
VRB8
U
U
DBS[0]
DBS[1]
DADRS[10]
DADRS[7]
DADRS[8]
VDD
GND
GND
GND
GND
GND
GND
VDD
VRTD10
VRB10
VRBD10
DVSSAD10
AVDDAD8
SYNC
NBC10
TSRW
VRT10
AVSSAD10
WM1DTI[4]
WM1DTI[7]
AGCCTL
COUT
WM2DTQ[4] WM2DTO[6] WM1DTO[1] WM1DTO[6]
WM1DTI[2]
WM1DTI[6]
WM1DTI[5] REC656O[0]
VDD2
VDD3
INT[1]
INT[6]
DADRS[4]
DADRS[2]
DADRS[3]
W
GND
INT[7]
DADRS[6]
DADRS[5]
DADRS[1]
DADRS[0]
V
Y
INT[5]
INT[4]
INT[3]
INT[2]
CTS[2]
VDD
VDD
AA
INT[0]
SCLK[1]
SCLK[0]
CTS[1]
RTS[0]
GND
GND
AB
CTS[3]
RTS[3]
CTS[0]
RX[3]
TX[3]
VDD3
VDD3
DVACK
ROUT
YOUT
TDI
TCK
VDD3
HDATA[4]
HDATA[3]
HCS[0]
HCS[3]
HADRS[29]
HADRS[19]
HADRS[16]
HDCS[0]
HDWE
HDATA[5]
HDATA[2]
HDATA[1]
HADRS[11]
VDD
HDREQ[0]
HDACK[1]
TX[0]
AE
HADRS[28]
HADRS[27]
HADRS[15]
HDCS[1]
HDATA[7]
HDATA[6]
HADRS[9]
HADRS[10]
HCS[5]
HDACK[0]
TX[1]
RX[1]
RX[0]
AD
VDD3
GND
VDD
VDD3
GND
VDD
VDD3
AC
RTS[1]
RTS[2]
RX[2]
TX[2]
HWAIT
PLLON
TRST
REC656I[7]
REC656I[2]
: 1.2V Power supply
: 3.3V Power supply
: Ground
GND
AH
NC
HCS[1]
HADRS[30]
HADRS[14]
HDATA[14]
HDATA[13]
HDATA[10]
HDATA[9]
HCLKO
HCLKEN
HADRS[21]
HADRS[22]
HADRS[26]
VDD
AG
NC
HCS[4]
HCS[2]
HADRS[13]
HDATA[15]
HDATA[12]
HDATA11]
HDATA[8]
DQMWS[1]
HRAS
HADRS[20]
HADRS[23]
HADRS[25]
VDD3
AF
HDREQ[1]
HOE
HADRS[12]
HDATA[0]
DQMWS[0]
HCAS
HADRS[17]
HADRS[18]
HADRS[24]
TESTMOD[5] TESTMOD[4] TESTMOD[3]
VDD
VDD
TMS
PLLRST
PLL2AVSS
DVVIDEO[7]
TESTMOD[0] TESTMOD[1] TESTMOD[2]
CSYNC
VIPWM
TESTMOD[6]
VDD
TDO
DVVCLKO
PXCLK
REC656I[5]
GND
REC656I[6]
REC656I[1]
REC656I[4]
VDD
DVVIDEO[5] REC656I[0]
R656CLKI
DVVIDEO[6] REC656I[3]
VDD3
DVVCLKI
PLL2AVDD
ADMCLKI
REC656O[7] DVVIDEO[3] DVVIDEO[4]
GOUT
DVVIDEO[2]
VDD
DVREQ
AVDD1DA10
AVSS2DA10
REC656O[2] AVDD2DA10
REC656O[1] REC656O[3]
VDD
AH
AVSS1DA10 REC656O[6] DVVIDEO[0] DVVIDEO[1]
BOUT
IREF[1]
REC656O[5]
ACCCTL
PEDCTL
AG
HKEYPLS
VDD
IREF[0]
AF
WM1DTI[3]
GND
VDD3
VDD
WM1DTI[0]
WM2DTO[3] WM1DTO[0] WM1DTO[5]
WM2DTO[0] WM2DTO[7] WM1DTO[2]
REC656O[4] AVDD1DA10
AE
AC
WMCLKO
WM1DTI[1]
VDD
AD
AB
WM1DTO[4]
AA
WM2DTO[1] WM2DTO[4] WM1DTO[3] WM2DTC[1]
GND
TSCLK
STREAM
VBGR10
CVBSIN
Y
PACKETEN WM2DTO[2]
W
AVDDAD10
V
VRM10
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
6
ARRAS
ARDQM[1]
ARWE
ARADRS[12] ARADRS[13] ARADRS[14]
ARDATA[1]
ARCLKO
AMCLK2
DVAMCLKO
ARDATA[8]
AMCLK1
DACCLKO
VDD
VMCLK
ARDQM[0]
ADCCLKO
PLL1AVSS
PLL3AVDD
TRACE
AT2ADR[0]
ARDATA[9]
PLL3AVSS
PCO
DBI
AT2CS[1]
ARDATA[10]
VDD
RESET
AT2DIOR
ARDATA[6]
AT2CS[0]
AT2MODE
AT2IORDY
AT2DATA[0]
ARDATA[11] ARDATA[12] ARDATA[13]
AT2INTRQ
AT2ADR[2]
AT2RESET
AT2DATA[5]
ARDATA[3]
AT2DMARQ
AT2DIOW
AT2DATA[4]
AT2DATA[8] AT2DATA[10] AT2DATA[15]
ARDATA[4]
AT2DATA[2]
AT2DATA[1]
ARDATA[14] ARDATA[15]
AT2DATA[7]
AT2DATA[6]
AT2DATA[11] AT2DATA[12] AT1DATA[13] AT2DATA[14] AT1ADR[2]
AT1ADR[0]
AT1RESET
AT1DATA[3]
AT1DATA[0]
AT1DMACK
AT1DIOW
AT1ADR[1]
AT1DIOR
AT1DATA[1]
AT1DATA[2]
EDATA28]
EDATA[27]
EDATA[29]
EDATA[26]
AT1DATA[6] AT1DATA[14]
EDATA[19]
EDATA[18]
AT1DATA[7]
EDATA[21]
EDATA[20]
EDATA[25]
EDATA[22]
EDATA[24]
AT1DATA[12]
B
EDATA[23]
A
VDD
5
7
8
Pin Name list
A
B
C
D
E
F
XV-DVR9H
8
157
1
2
3
4
Pin Function
A
B
C
D
E
No.
BALL
Address
Pin Name
I/O
Function
No.
BALL
Address
Pin Name
I/O
Function
1
VDD3
VDD3
−
3.3V I/O power supply
56
V26
VRT10
−
TOP side reference voltage
2
GND
GND
−
Ground
57
V28
VRM10
−
Common voltage
3
VDD
VDD
−
1.2V LOGIC power supply
58
U25
VRB10
−
Bottom side reference voltage
4
AH28
VDD
−
59
U26
VRBD10
5
AF26
ACCCTL
O
60
U27
DVSSAD10
−
ADC part digital ground
6
AF27
PEDCTL
O
VIDEO-Analog, Output buffer
61
T24
DVDDAD10
−
ADC part digital power supply (3.3V)
7
AG28
HKEYPLS
O
VIDEO-Analog, Output buffer
62
GND
GND
−
Ground
8
GND
GND
−
Ground
63
VDD
VDD
−
I/O
Analog test bus (for debugging)
9
AE26
WM1DTI[7]
I/O
WM/VWM, Bidirectional buffer
64
U28
AVDDAD8
−
10
AD25
WM1DTI[6]
I/O
65
T25
AVSSAD8
−
11
AC24
WM1DTI[5]
I/O
66
T26
CIN
I
VIDEO-Analog
12
AE27
WM1DTI[4]
I/O
67
T27
VRT8
−
VIDEO-Analog
13
AF28
WM1DTI[3]
I/O
68
T28
VRB8
−
VIDEO-Analog
14
AD26
WM1DTI[2]
I/O
69
R25
AVDDAD8
−
15
AE28
WM1DTI[1]
I/O
70
R24
AVSSAD8
−
16
AC25
WM1DTI[0]
I/O
71
R26
CRIN
I
VIDEO-Analog
17
AB24
WM1DTO[7]
I/O
72
R28
BG8
−
VIDEO-Analog
18
VDD
VDD
73
P28
AVDDAD8
−
−
−
−
19
GND
GND
Ground
74
P27
AVSSAD8
20
AD27
WM1DTO[6]
I/O
75
R27
GIN
I
21
AC26
WM1DTO[5]
I/O
76
P26
DVSSAD8
−
22
AD28
WM1DTO[4]
I/O
77
P25
DVDDAD8
−
23
AA24
WM1DTO[3]
I/O
78
GND
GND
24
AB25
WM1DTO[2]
I/O
79
P24
EDATA[15]
−
80
VDD3
VDD3
81
N28
EDATA[0]
−
25
VDD
VDD
AC27
WM1DTO[1]
27
GND
GND
−
Ground
82
N27
EDATA[1]
I/O
SDRAM ENC, Bidirectional buffer
28
AC28
WMCLKO
O
WM/VWM, Output buffer
83
N26
EDATA[2]
I/O
−
Ground
26
I/O
−
I/O
VIDEO-Analog
29
VDD3
VDD3
84
VDD
VDD
30
AB26
WM1DTO[0]
I/O
85
N25
EDATA[13]
31
AA25
WM2DTO[7]
O
86
GND
GND
32
AB27
WM2DTO[6]
O
87
M28
EDATA[3]
I/O
−
I/O
−
I/O
−
Ground
33
AB28
VDD
−
88
GND
GND
34
Y24
WM2DTO[5]
O
89
N24
EDATA[14]
I/O
35
AA27
WM2DTO[4]
O
90
M27
EDATA[4]
I/O
36
AA26
WM2DTO[3]
O
91
M26
EDATA[5]
I/O
37
AA28
WM2DTO[2]
O
92
VDD3
VDD3
38
W24
WM2DTO[1]
O
93
M25
EDATA[11]
39
GND
GND
−
Ground
94
L28
EDATA[6]
I/O
40
Y25
WM2DTO[0]
O
95
L27
EDATA[7]
I/O
−
I/O
−
Ground
41
GND
GND
−
Ground
96
VDD
VDD
42
Y26
SYNC
I/O
TS OUT, Bidirectional buffer
97
M24
EDATA[12]
43
Y27
STREAM
I/O
TS OUT,Bidirectional buffer
98
GND
GND
44
Y28
PACKETEN
I/O
TS OUT,Bidirectional buffer
99
L26
EDATA[8]
45
VDD3
VDD3
−
3.3V IO power supply
100 GND
GND
46
W25
TSRW
O
TS OUT,Output buffer
101 L25
EDATA[9]
I/O
47
GND
GND
−
Ground
102 K28
EDQM
O
SDRAM ENC, Output buffer
48
V24
TSCLK
O
TS OUT,Output buffer
103 K27
EWE
O
49
VDD3
VDD3
−
104 VDD3
VDD3
−
50
W26
NBC10
−
Bias current adjustment terminal
105 K26
ECAS
O
51
W27
VBGR10
I/O
Analog test bus (for debugging)
106 L24
EDATA[10]
I/O
52
W28
AVDDAD10
−
ADC part analog power supply (3.3V)
107 K25
ECLKEN
O
53
V25
AVSSAD10
−
ADC part analog Ground
108 VDD
VDD
−
54
V27
CVBSIN
I
Analog Input
109 J28
ERAS
O
55
U24
VRTD10
−
Input common bias
110 GND
GND
−
Ground
I/O
−
I/O
−
Ground
Ground
F
158
XV-DVR9H
1
2
3
4
5
No.
BALL
Address
6
Pin Name
I/O
7
Function
No.
BALL
Address
Pin Name
8
I/O
−
111 J27
ECS
O
166 VDD3
VDD3
112 GND
GND
−
Ground
167 C25
AT1DATA[11]
I/O
ATAPI-DVD, Bidirectional buffer
113 J26
EADRS[11]
O
168 D24
AT1DATA[10]
I/O
114 J25
EADRS[8]
O
169 E23
AT1DATA[9]
I/O
115 GND
GND
−
Ground
170 GND
GND
116 K24
ECLKO
O
171 A26
AT1DATA[8]
117 VDD3
VDD3
−
172 A25
AT1DATA[7]
I/O
118 H28
EBS[0]
O
173 B25
AT1DATA[6]
I/O
−
I/O
−
Ground
119 H27
EBS[1]
O
174 GND
GND
120 H26
EADRS[10]
O
175 C24
AT1DATA[5]
121 VDD
VDD
−
176 VDD3
VDD3
122 G28
EADRS[0]
O
177 E22
AT1DATA[4]
123 GND
GND
−
Ground
178 VDD
VDD
124 J24
EADRS[9]
O
179 D23
AT1DATA[3]
125 GND
GND
−
Ground
180 A24
AT1DATA[2]
I/O
126 G27
EADRS[1]
O
181 B24
AT1DATA[1]
I/O
I/O
−
I/O
−
I/O
−
127 H25
EADRS[6]
O
182 GND
GND
128 G26
EADRS[2]
O
183 C23
AT1DATA[0]
I/O
129 VDD3
VDD3
130 F27
EDATA[17]
I/O
−
A
Function
Ground
B
Ground
184 D22
AT1RESET
O
Output buffer,8mA
185 E21
AT1DMARQ
I
ATAPI-DVD, Input buffer
131 F28
EDATA[16]
I/O
186 GND
GND
−
Ground
132 H24
EADRS[7]
O
187 B23
AT1DMACK
O
ATAPI-DVD, Output buffer
133 VDD
VDD
−
188 VDD3
VDD3
−
134 G25
EADRS[4]
O
189 A23
AT1DIOW
O
135 GND
GND
−
Ground
190 VDD
VDD
−
136 F26
EDATA[30]
191 C22
AT1DIOR
O
137 GND
GND
Ground
192 D21
AT1IORDY
I
138 E27
EDATA[19]
I/O
193 B22
AT1INTRQ
I
139 E28
EDATA[18]
I/O
194 GND
GND
−
Ground
140 F25
EDATA[31]
I/O
195 E20
AT1ADR[2]
O
141 VDD3
VDD3
142 E26
EDATA[29]
143 G24
144 D28
145 VDD
VDD
146 D27
EDATA[21]
147 GND
GND
148 C28
EDATA[22]
149 GND
GND
−
Ground
204 D20
AT2DATA[14]
I/O
ATAPI-HDD, Bidirectional buffer
150 F24
EADRS[3]
O
205 C20
AT2DATA[13]
I/O
151 E25
EDATA[28]
I/O
206 GND
GND
152 D26
EDATA[26]
I/O
207 B20
AT2DATA[12]
153 VDD3
VDD3
208 A20
AT2DATA[11]
I/O
154 B28
EDATA[23]
I/O
209 D19
AT2DATA[10]
I/O
155 C27
EDATA[25]
I/O
210 GND
GND
156 B27
EDATA24]
I/O
211 E18
AT2DATA[9]
157 VDD
VDD
212 VDD3
VDD3
158 D25
EDATA[27]
213 C19
AT2DATA[8]
159 GND
GND
Ground
214 VDD
VDD
160 C26
AT1DATA[15]
I/O
215 B19
AT2DATA[7]
I/O
161 E24
AT1DATA[14]
I/O
216 A19
AT2DATA[6]
I/O
162 GND
GND
−
Ground
217 D18
AT2DATA[5]
I/O
163 A28
VDD
−
218 GND
GND
164 B26
AT1DATA[13]
I/O
219 C18
AT2DATA[4]
I/O
165 A27
AT1DATA[12]
I/O
220 E17
AT2DATA[3]
I/O
I/O
−
−
196 A22
AT1ADR[1]
O
I/O
197 C21
AT1ADR[0]
O
EADRS[5]
O
198 GND
GND
−
Ground
EDATA[20]
I/O
199 B21
AT1CS[1]
O
−
I/O
−
I/O
−
−
I/O
−
D
200 VDD3
VDD3
−
201 A21
AT1CS[0]
O
Ground
202 VDD
VDD
203 E19
AT2DATA[15]
−
I/O
−
I/O
−
I/O
−
I/O
−
−
C
Ground
E
Ground
ATAPI-HDD, idirectional buffer
Ground
F
159
XV-DVR9H
5
6
7
8
1
A
B
C
D
E
No.
BALL
Address
2
Pin Name
221 B18
AT2DATA[2]
222 GND
GND
I/O
I/O
−
223 A18
AT2DATA[1]
224 VDD3
VDD3
I/O
225 D17
AT2DATA[0]
226 VDD
VDD
227 C17
AT2RESET
I/O
228 B17
AT2DMARQ
229 E16
230 GND
−
I/O
−
3
Function
No.
BALL
Address
4
Pin Name
I/O
Function
276 VDD3
VDD3
−
Ground
277 C11
AMCLK2
I
CLOCK, Input buffer
278 GND
GND
−
Ground
279 D11
ARDATA[1]
280 VDD3
VDD3
I/O
−
281 A10
ARDATA[14]
282 VDD
VDD
I
ATAPI-HDD, Input buffer
283 B10
ARDATA[15]
I/O
SDRAM-ATAPI , Bidirectional buffer
AT2DMACK
O
ATAPI-HDD, Output buffer
284 E11
ARDATA[0]
I/O
GND
−
Ground
285 C10
ARDATA[4]
I/O
231 A17
AT2DIOW
O
286 GND
GND
232 D16
AT2DIOR
O
287 D10
ARDATA[3]
I/O
233 C16
AT2IORDY
I
288 A9
ARDATA[11]
I/O
234 GND
GND
−
Ground
289 B9
ARDATA[12]
I/O
235 B16
AT2INTRQ
I
290 GND
GND
236 VDD3
VDD3
237 A16
AT2ADR[2]
238 VDD
VDD
239 E15
AT2ADR[1]
240 GND
GND
241 D15
AT2ADR[0]
242 VDD
VDD
243 C15
−
I/O
−
I/O
−
I/O
−
−
−
Ground
Ground
291 C9
ARDATA[13]
I/O
292 E10
ARDATA[2]
I/O
293 D9
ARDATA[6]
I/O
294 VDD3
VDD3
−
Ground
295 A8
ARDATA[10]
I/O
296 B8
ARDATA[9]
I/O
−
297 C8
ARWE
O
AT2CS[1]
O
298 VDD
VDD
−
244 GND
GND
−
Ground
299 A7
ARDATA[8]
I/O
245 B15
AT2CS[0]
O
300 E9
ARDATA[5]
I/O
246 VDD
VDD
−
301 D8
ARDQM[0]
O
SDRAM-ATAPI , Output buffer
247 A15
AT2MODE
I
302 GND
GND
−
Ground
I/O
248 GND
GND
−
Ground
303 B7
ARDQM[1]
O
249 GND
GND
−
Ground
304 C7
ARCS[0]
O
250 A14
RESET
I
Input buffer (5V tolerant)
305 VDD3
VDD3
−
251 VDD3
VDD3
−
306 A6
ARCLKO
O
252 B14
VDD
−
307 GND
GND
−
Ground
253 C14
DBI
I
TEST, Input buffer
308 B6
ARADRS[12]
O
254 GND
GND
−
Ground
309 E8
ARDATA[7]
I/O
255 D14
TRACE
I
TEST, Input buffer
310 D7
ARRAS
O
256 E14
VDD
−
311 VDD3
VDD3
−
257 A13
PCO
O
CLOCK, 3 state output buffer
312 A5
ARADRS[11]
O
258 GND
GND
−
Ground
313 C6
ARADRS[13]
O
259 B13
PLL3AVSS
−
314 B5
ARADRS[9]
O
260 C13
PLL3AVDD
−
315 VDD
VDD
−
261 D13
VMCLK
I
316 E7
ARCAS
O
262 E13
PLL1AVDD
−
317 D6
ARADRS[14]
O
263 A12
PLL1AVSS
−
318 C5
ARADRS[1]
O
264 VDD3
VDD3
−
319 GND
GND
−
Ground
CLOCK, Input buffer
265 B12
ADCCLKO
O
CLOCK, Output buffer
320 B4
ARADRS[3]
O
266 GND
GND
−
Ground
321 A4
ARADRS[8]
O
267 C12
VDD
−
322 A3
ARADRS[7]
O
268 VDD3
VDD3
−
323 GND
GND
−
Ground
269 D12
DVAMCLKO
O
324 E6
ARCS[1]
O
270 GND
GND
−
Ground
325 D5
ARADRS[0]
O
271 A11
DACCLKO
O
326 C4
ARADRS[2]
O
272 VDD3
VDD3
−
327 VDD3
VDD3
−
273 E12
DVAMCLKI
I
AUDIO CLOCK, Input buffer
328 A2
ARADRS[5]
O
274 GND
GND
−
Ground
329 B3
ARADRS[6]
O
275 B11
AMCLK1
I
CLOCK, Input buffer
330 B2
ARADRS[4]
O
F
160
XV-DVR9H
1
2
3
4
5
No.
BALL
Address
6
Pin Name
I/O
7
Function
No.
BALL
Address
Pin Name
8
I/O
331 GND
GND
−
Ground
386 VDD
VDD
−
332 E5
ARADRS[10]
O
SDRAM-ATAPI, Output buffer
387 GND
GND
−
Ground
333 D4
SRCBCKI
I
AUDIO, Input buffer
388 L3
SPIDATAI
334 VDD3
VDD3
−
389 VDD
VDD
335 C3
SRCLRCKI
I
AUDIO, Input buffer
390 M5
SPIDATAO
336 B1
SRCDATAI
I
AUDIO, Input buffer
391 GND
GND
337 A1
VDD
−
392 L2
SPICLK
338 GND
GND
−
Ground
393 GND
GND
339 C2
SRCBCKO
O
AUDIO, Output buffer
394 L1
DDATA[0]
I/O
HOST, Bidirectional buffer
−
I/O
−
I/O
−
I/O
Ground
Ground
SDRAM-DEC, Bidirectional buffer
340 VDD
VDD
−
395 VDD3
VDD3
341 D3
SRCLRCKO
O
396 M4
DDATA[14]
342 E4
SRCDATAO
O
397 M3
DDATA[15]
I/O
343 F5
SPDIFI
I
AUDIO, Input buffer
398 M2
DDATA[2]
I/O
344 D2
SPDIFO
O
399 VDD
VDD
345 C1
DVLRCK
I/O
AUDIO, Bidirectional buffer
400 N5
DDATA[11]
346 E3
DVBCK
I/O
401 GND
GND
347 D1
DVADATA
I/O
402 M1
DDATA[1]
−
A
Function
I/O
−
I/O
−
I/O
−
Ground
348 F4
ACMOD[1]
I
AUDIO, Input buffer
403 GND
GND
349 G5
ACMOD[0]
I
AUDIO, Input buffer
404 N4
DDATA[12]
I/O
350 E1
LRCKI
I
AUDIO, Input buffer
405 N3
DDATA[13]
I/O
351 E2
BCKI
I
AUDIO, Input buffer
406 N2
DDATA[3]
I/O
352 GND
GND
−
Ground
407 VDD3
VDD3
353 F3
ADATAI
I
AUDIO, Input buffer
408 N1
DDATA[4]
354 GND
GND
−
Ground
409 P5
DDATA[8]
I/O
355 G4
LRCKO
O
410 P4
DDATA[9]
I/O
356 VDD
VDD
−
411 VDD
VDD
357 H5
BCKO
O
412 P3
DDATA[10]
358 F1
ADATAO
O
DVD-AUDIO, Output buffer
413 GND
GND
359 F2
DVDADT[7]
O
414 P2
DDATA[6]
360 G2
DVDADT[6]
O
415 GND
GND
361 G3
DVDADT[5]
O
416 P1
DDATA[5]
I/O
362 J5
DVDADT[4]
O
417 R1
DDATA[7]
I/O
363 H4
DVDADT[3]
O
418 R2
DDQM[0]
O
SDRAM-DEC, Output buffer
364 G1
DVDADT[2]
O
419 VDD3
VDD3
−
365 H3
DVDADT[1]
O
420 R3
DWE
O
366 H2
DVDADT[0]
O
421 VDD
VDD
−
367 H1
DVDAADR[1]
O
422 R4
DDQM[1]
O
368 K5
DVDAADR[0]
O
423 GND
GND
−
Ground
369 J4
DVDAREQ
I/O
DVD-AUDIO, Bidirectional buffer
424 R5
DCLKO
O
370 GND
GND
−
Ground
425 VDD3
VDD3
−
371 J3
DVDAACK
O
426 VDD
VDD
−
372 VDD
VDD
−
427 T1
DCAS
O
373 J2
SCICS[1]
I/O
428 GND
GND
−
Ground
374 VDD3
VDD3
429 T2
DRAS
−
375 J1
SCICS[0]
430 GND
GND
−
Ground
376 VDD
VDD
377 K4
SCIDATA[1]
378 GND
GND
379 L5
SCIDATA[0]
380 K3
VDD
381 K2
SCICLK[1]
382 GND
GND
383 K1
SCICLK[0]
384 GND
GND
385 L4
SPICS
−
I/O
−
I/O
−
I/O
−
I/O
−
Ground
Ground
Ground
431 T3
DCS
O
432 T4
DADRS[11]
O
Ground
433 U1
DBS[0]
O
I/O
434 VDD3
VDD3
−
−
435 T5
DADRS[9]
O
I/O
436 U2
DBS[1]
O
Ground
437 U3
DADRS[10]
O
438 VDD
VDD
−
Ground
439 U4
DADRS[7]
O
440 GND
GND
−
Ground
I/O
−
I/O
D
E
−
−
C
I/O
−
B
F
161
XV-DVR9H
5
6
7
8
1
A
B
C
D
E
No.
BALL
Address
2
Pin Name
I/O
3
Function
No.
BALL
Address
4
Pin Name
I/O
Function
441 V1
DADRS[0]
O
496 VDD
VDD
−
442 GND
GND
−
Ground
497 AD4
HDACK[0]
O
Output buffer, 4mA
443 V2
DADRS[1]
O
498 AF1
HDREQ[1]
I
HOST, Input buffer
444 VDD
VDD
−
499 AE3
HDREQ[0]
I
HOST, Input buffer
445 U5
DADRS[8]
O
500 AC5
HWAIT
I
HOST, Input buffer
446 GND
GND
−
Ground
501 AF2
HOE
O
HOST, Output buffer
447 V3
DADRS[5]
O
502 VDD3
VDD3
−
448 VDD3
VDD3
−
503 GND
GND
−
Ground
449 V4
DADRS[6]
O
504 AE4
VDD
−
450 W1
DADRS[3]
O
505 AD5
HCS[5]
O
HOST, Output buffer
451 W2
DADRS[2]
O
506 AG2
HCS[4]
O
HOST, Output buffer
452 VDD
VDD
−
507 AF3
HCS[3]
O
HOST, Output buffer
453 W3
DADRS[4]
O
508 AG3
HCS[2]
O
HOST, Output buffer
454 GND
GND
−
Ground
509 AH2
HCS[1]
O
HOST, Output buffer
455 GND
GND
−
Ground
510 GND
GND
−
Ground
456 GND
GND
−
Ground
511 AF4
HCS[0]
O
HOST, Output buffer
457 V5
INT[7]
I/O
512 VDD
VDD
458 VDD
VDD
−
513 AD6
HADRS[10]
−
I/O
−
459 W4
INT[6]
I/O
514 GND
GND
460 Y1
INT[5]
I/O
515 AE5
HADRS[11]
I/O
461 Y2
INT[4]
I/O
516 AG4
HADRS[13]
I/O
462 VDD3
VDD3
−
517 AH3
HADRS[30]
I/O
463 Y3
INT[3]
I/O
518 VDD3
VDD3
464 GND
GND
−
Ground
519 AF5
HADRS[12]
465 Y4
INT[2]
I/O
520 GND
GND
466 VDD
VDD
−
521 AH4
HADRS[14]
467 W5
INT[1]
I/O
522 AE6
HDATA[1]
I/O
468 AA1
INT[0]
I/O
523 AD7
HADRS[9]
I/O
469 AA2
SCLK[1]
I/O
524 VDD3
VDD3
470 AA3
SCLK[0]
I/O
525 AG5
HDATA[15]
471 AB1
CTS[3]
I/O
526 GND
GND
472 GND
GND
Ground
527 AH5
HDATA[14]
473 Y5
CTS[2]
528 GND
GND
474 GND
GND
Ground
529 AF6
HDATA[0]
I/O
475 AA4
CTS[1]
I/O
530 AD8
HDATA[6]
I/O
476 VDD
VDD
−
531 AE7
HDATA[2]
I/O
477 AB3
CTS[0]
I/O
532 VDD3
VDD3
478 AB2
RTS[3]
I/O
533 AG6
HDATA[12]
479 AC2
RTS[2]
I/O
534 VDD
VDD
−
480 AC1
RTS[1]
I/O
535 AH6
HDATA[13]
I/O
481 AA5
RTS[0]
I/O
482 VDD3
VDD3
−
483 AB4
RX[3]
I/O
484 GND
GND
−
485 AC3
RX[2]
486 VDD
VDD
487 AD2
488 AD1
−
I/O
−
−
I/O
−
I/O
−
I/O
−
I/O
−
−
I/O
Ground
Ground
Ground
Ground
536 AG7
HDATA[11]
I/O
537 AF7
HDATA[3]
I/O
538 GND
GND
Ground
539 AE8
HDATA[5]
I/O
540 GND
GND
−
541 AD9
HDATA[7]
RX[1]
I/O
542 AF8
HDATA[4]
I/O
RX[0]
I/O
543 AH7
HDATA[10]
I/O
489 AB5
TX[3]
I/O
544 VDD3
VDD3
490 AC4
TX[2]
I/O
545 AG8
HDATA[8]
491 AD3
TX[1]
I/O
546 VDD
VDD
492 GND
GND
−
Ground
547 AH8
HDATA[9]
I/O
493 AE1
TX[0]
I/O
548 AE9
HDWE
O
HOST, Output buffer
494 GND
GND
−
Ground
549 AF9
DQMWS[0]
O
HOST, Output buffer
495 AE2
HDACK[1]
O
HOST, Output buffer
550 GND
GND
−
Ground
−
I/O
−
I/O
−
Ground
Ground
I/O
−
F
162
XV-DVR9H
1
2
3
4
5
No.
BALL
Address
6
Pin Name
I/O
Function
7
No.
BALL
Address
Pin Name
8
I/O
551 AD10
HDCS[1]
O
HOST, Output buffer
606 AG16
TMS
I
TEST, nput buffer
552 GND
GND
−
Ground
607 GND
GND
−
Ground
553 AG9
DQMWS[1]
O
HOST, Output buffer
608 AF16
TDO
O
TEST, Output buffer
554 VDD3
VDD3
−
609 VDD
VDD
−
555 AH9
HCLKO
O
HOST, Output buffer
610 AE16
TDI
I
TEST, Input buffer
556 GND
GND
−
Ground
611 VDD3
VDD3
−
557 AE10
HDCS[0]
O
HOST, Output buffer
612 AH17
TRST
I
558 VDD3
VDD3
559 AD11
HADRS[15]
−
I/O
613 GND
GND
−
614 AD16
TCK
I
TEST, Input buffer
Ground
TEST, Input buffer
560 VDD
VDD
−
615 VDD3
VDD3
−
561 AF10
HCAS
O
HOST, Output buffer
616 AG17
PLLRST
I
CLOCK, Input buffer
562 AG10
HRAS
O
HOST, Output buffer
617 GND
GND
−
Ground
563 AH10
HCLKEN
O
HOST, Output buffer
618 AF17
DVVCLKO
O
564 GND
GND
565 AE11
HADRS[16]
566 GND
GND
567 AF11
HADRS[17]
−
I/O
−
I/O
Groud
619 VDD3
VDD3
−
620 AE17
PXCLK
O
Ground
621 GND
GND
−
Ground
622 AH18
REC656I[7]
I
VIDEO-Digital, Input buffer
568 AD12
HADRS[27]
I/O
623 VDD
VDD
−
569 AG11
HADRS[20]
I/O
624 AG18
REC656I[6]
I
−
A
Function
625 GND
GND
−
Ground
626 AD17
REC656I[5]
I
REC656I[4]
I
REC656I[3]
I
REC656I[2]
I
REC656I[1]
I
631 AF19
REC656I[0]
I
632 AH20
DVVIDEO[7]
I/O
B
570 VDD3
VDD3
571 AH11
HADRS[21]
572 VDD
VDD
−
627 AF18
573 AE12
HADRS[19]
I/O
628 AE18
574 AF12
HADRS[18]
I/O
629 AH19
575 AG12
HADRS[23]
I/O
630 AG19
576 GND
GND
Ground
577 AD13
HADRS[28]
578 VDD
VDD
579 AH12
HADRS[22]
580 GND
GND
581 AE13
HADRS[29]
582 VDD
VDD
583 AF13
HADRS[24]
584 VDD3
VDD3
585 AG13
HADRS[25]
586 GND
GND
587 AH13
HADRS[26]
588 GND
GND
−
589 GND
GND
−
Ground
644 AF21
DVVIDEO[3]
I/O
VIDEO-Digital, Bidirectional buffer
590 AD14
TESTMOD[6]
I
TEST, Input buffer
645 AD20
DVVIDEO[2]
I/O
591 AE14
VDD
−
646 AH22
DVVIDEO[1]
I/O
592 AF14
TESTMOD[5]
I
TEST, Input buffer
647 AG22
DVVIDEO[0]
I/O
593 GND
GND
−
Ground
648 AE21
REC656O[7]
O
VIDEO-Digital, Output buffer
594 AG14
TESTMOD[4]
I
TEST, Input buffer
649 AF22
REC656O[6]
O
595 VDD
VDD
−
650 VDD
VDD
−
596 AH14
TESTMOD[3]
I
TEST, Input buffer
651 AH23
DVREQ
I
597 GND
GND
−
Ground
652 GND
GND
−
Ground
598 AH15
TESTMOD[2]
I
TEST, Input buffer
653 AG23
DVACK
O
599 VDD
VDD
−
654 GND
GND
−
Ground
600 AG15
TESTMOD[1]
I
TEST, Input buffer
655 AE22
AVSS1DA10
−
601 GND
GND
−
Ground
656 AD21
GOUT
O
602 AF15
TESTMOD[0]
I
TEST, Input buffer
657 AH24
AVDD1DA10
−
603 AE15
CSYNC
I
CLOCK, Input buffer
658 AF23
BOUT
O
604 AD15
VIPWM
O
659 AE23
AVDD1DA10
−
605 AH16
PLLON
I
TEST, Input buffer
660 AG24
ROUT
O
I/O
−
I/O
C
−
633 AD18
DVVIDEO[6]
I/O
I/O
634 AE19
DVVIDEO[5]
I/O
−
I/O
Ground
635 VDD3
VDD3
−
636 AG20
DVVCLKI
I
CLOCK, Input buffer
−
637 AF20
PLL2AVDD
−
I/O
638 AH21
PLL2AVSS
−
639 AD19
R656CLKI
I
640 GND
GND
−
Ground
Ground
641 AE20
ADMCLKI
I
CLOCKl, Input buffer
642 VDD3
VDD3
Ground
643 AG21
DVVIDEO[4]
−
I/O
−
I/O
−
I/O
D
CLOCK, Input buffer
E
VIDEO-Analog
VIDEO-Analog
VIDEO-Analog
F
163
XV-DVR9H
5
6
7
8
1
A
No.
BALL
Address
2
Pin Name
I/O
3
Function
No.
BALL
Address
4
Pin Name
I/O
Function
661 AD22
IREF[0]
−
VIDEO-Analog
669 AD23
REC656O[4]
O
662 AF24
IREF[1]
−
VIDEO-Analog
670 AH27
REC656O[3]
O
663 AG25
YOUT
O
VIDEO-Analog
671 AG26
REC656O[2]
O
672 AG27
REC656O[1]
O
VIDEO-Analog
673 GND
GND
−
Ground
674 AD24
REC656O[0]
O
675 AE25
AGCCTL
O
VIDEO-Analog
664 AH25
AVSS2DA10
−
665 AE24
COUT
O
666 AH26
AVDD2DA10
−
667 GND
GND
−
Ground
668 AF25
REC656O[5]
O
B
Others
BALL
Address
C
D
E
Pin Name
BALL
Address
Pin Name
BALL
Address
Pin Name
BALL
Address
Pin Name
AA23
GND
P12
GND
AC11
VDD
AB23
VDD3
AA6
GND
P13
GND
AC14
VDD
AB6
VDD3
AC12
GND
P14
GND
AC6
VDD
AC10
VDD3
AC17
GND
P15
GND
AC8
VDD
AC13
VDD3
AC20
GND
P16
GND
L6
VDD
AC16
VDD3
AC9
GND
P17
GND
AC11
VDD
AC19
VDD3
F11
GND
R12
GND
AC14
VDD
AC22
VDD3
F14
GND
R13
GND
AC6
VDD
AC7
VDD3
F17
GND
R14
GND
AC8
VDD
F10
VDD3
F20
GND
R15
GND
L6
VDD
F13
VDD3
F23
GND
R16
GND
P6
VDD
F16
VDD3
VDD3
F8
GND
R17
GND
U6
VDD
F19
H6
GND
R23
GND
Y6
VDD
F22
VDD3
J23
GND
R6
GND
F12
VDD
F7
VDD3
M12
GND
T12
GND
F6
VDD
G23
VDD3
M13
GND
T13
GND
F9
VDD
G6
VDD3
M14
GND
T14
GND
J6
VDD
K23
VDD3
M15
GND
T15
GND
AC15
VDD
K6
VDD3
M16
GND
T16
GND
AC18
VDD
N23
VDD3
M17
GND
T17
GND
AC21
VDD
N6
VDD3
M23
GND
U12
GND
AC23
VDD
T23
VDD3
M6
GND
U13
GND
F15
VDD
T6
VDD3
N12
GND
U14
GND
F18
VDD
W23
VDD3
N13
GND
U15
GND
F21
VDD
W6
VDD3
N14
GND
U16
GND
H23
VDD
N15
GND
U17
GND
L23
VDD
N16
GND
V23
GND
P23
VDD
N17
GND
V6
GND
U23
VDD
Y23
VDD
F
164
XV-DVR9H
1
2
3
4
5
6
7
8
UPD72852AGB-8EU (MAIN ASSY : IC5101)
• IEEE1394 Physical IC
A
DGND
LREQ
FNSel
SPD/BDB
DVDD
LPS
LKON
DGND
DVDD
RESETB
AVDD
AGND
AGND
IC (AL)
DIRECT
AGND
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
Pin Arrangement
43
TpB1n
DGND
7
42
AGND
D0
8
41
TpBias0
D1
9
40
AVDD
DVDD
10
39
TpA0p
D2
11
38
TpA0n
D3
12
37
TpB0p
DGND
13
36
TpB0n
D4
14
35
AGND
D5
15
34
RI1
DGND
16
33
AGND
32
31
6
30
TpB1p
CTL1
29
44
28
5
27
TpA1n
CTL0
26
45
25
4
24
TpA1p
DVDD
23
46
22
3
21
AVDD
IC (DL)
20
TpBias1
47
19
48
2
18
1
SCLK
17
DGND
B
CPS
AVDD
CMC
IC (AL)
PC2
PC1
PC0
AVDD
AGND
XI
XO
DGND
DVDD
SUS/RES
D7
D6
C
Block Diagram
CMC 30
39 TpA0p
PC0 26
38 TpA0n
PC1 27
PC2 28
SUS/RES 19
Cable
Port 0
D
37 TpB0p
36 TpB0n
LREQ 63
LPS 59
DIRECT 50
Arbitration
and
Control State
Machine
Logic
SCLK 2
LKON 58
CTL0 5
CTL1 6
D0 8
D1 9
Link
Interface
I/O
46 TpA1p
45 TpA1n
Cable
Port 1
44 TpB1p
D2 11
43 TpB1n
D3 12
E
D4 14
D5 15
D6 17
D7 18
RESETB 55
CPS 32
Receive Data
Decoder
and
Retimer
Voltage
and
Current
Generator
Transmit Data
Encoder
Crystal Oscillator
PLL System
and
Transmit Clock
Generator
Cable
Power
Status
41 TpBias0
48 TpBias1
34 RI1
23 XI
22 XO
F
165
XV-DVR9H
5
6
7
8
1
2
3
4
Pin Function
A
• Cable Interface Pins
No.
B
I/O
Function
TpA0p
I/O
Port 0 twisted pair cable A positive phase I/O
38
TpA0n
I/O
Port 0 twisted pair cable A negative phase I/O
37
TpB0p
I/O
Port 0 twisted pair cable B positive phase I/O
36
TpB0n
I/O
Port 0 twisted pair cable B negative phase I/O
46
TpA1p
I/O
Port 1 twisted pair cable A positive phase I/O
45
TpA1n
I/O
Port 1 twisted pair cable A negative phase I/O
44
TpB1p
I/O
Port 1 twisted pair cable B positive phase I/O
43
TpB1n
I/O
Port 1 twisted pair cable B negative phase I/O
19
SUS/RES
32
C
Pin Name
39
CPS
I
Suspend/Resume function select
1 : Suspend/Resume on (IEEE1394a-2000 compliant)
0 : Suspend/Resume off (P1394a draft 1.3 compliant)
I
Cable power status
Connect to the cable through a 390 kΩ resistor and to the GND through a 100 kΩ resistor.
0 : Cable power fail
1 : Cable power on
• Link Interface Pins
No.
D
E
Pin Name
I/O
Function
8
D0
I/O
Data input/output (bit 0)
9
D1
I/O
11
D2
I/O
12
D3
I/O
14
D4
I/O
15
D5
I/O
17
D6
I/O
18
D7
I/O
5
CTL0
I/O
Link interface control (bit 0)
6
CTL1
I/O
Link interface control (bit 1)
63
LREQ
I
Link request input
2
SCLK
O
Link control output clock
LPS 1 : 49.152 MHz output
LPS 0 : Clamp to 0 (The clock signal will be output within 25 µsec after change to "0")
59
LPS
I
Link power status input
0 : Link power off
1 : Link power on (PHY/Link direct connection)
58
LKON
O
Link-on signal output
Link-on signal is 6.1444 MHz clock output.
50
DIRECT
I
PHY/Link isolation barrier control input
0 : Isolation barrier
1 : PHY/Link direct connection
F
166
XV-DVR9H
1
2
3
4
5
6
7
8
• Control Pins
No.
Pin Name
I/O
26
PC0
I
27
PC1
I
28
PC2
I
Function
A
Power class set input
This pin status will be loaded to Pwr_class bit which allocated to PHY register 4H.
IEEE1394a-2000 chapter [4.3.4.1]
30
CMC
I
Configuration manager capable setting
This pin status will be loaded to Contender bit which allocated to PHY register 4H.
0 : Non contender
1 : Contender
55
RESETB
I
Power on reset input
Connect to GND through a 0.1 µF capacitor.
0 : Reset
1 : Normal
B
Speed select (UPD72852GB)
I
0 : MAX. S200
FNSel = 0
1 : MAX. S400
61
SPD/BDB
BIAS Detected output (Logical Inverse)
O
0 : BIAS is coming from some port.
FNSel = 1
1 : BIAS is not coming from any port.
• IC
No.
Pin Name
29, 51 IC (AL)
3
IC (DL)
I/O
Function
−
Internally Connected (Low Clamped)
Connected to GND.
−
Internally Connected (Low Clamped)
Connected to GND.
C
• Power Supply Pins
No.
Pin Name
I/O
Function
25, 31, 40, 47, 54
AVDD
−
Analog power
24, 33, 35, 42, 49, 52, 53
AGND
−
Analog GND
4, 10, 20, 56, 60
DVDD
−
Digital VDD
1, 7, 13, 16, 21, 57, 64
DGND
−
Digital GND
D
• Other Pins
No.
Pin Name
I/O
Function
41
TpBias0
O
Port 0 twisted pair output
48
TpBias1
O
Port 1 twisted pair output
34
RI1
−
Resistor connection pin 1 for reference current generator
Please connect to GND pin through the 9.1 kΩ resistor.
23
XI
−
Crystal oscillator connection XI
22
XO
−
Crystal oscillator connection XO
62
FNSel
I
Function Select
0 : #61 acts as SPD (UPD72852GB compliant)
1 : #61 acts as BDB
E
F
167
XV-DVR9H
5
6
7
8
1
2
3
4
UPD72893BGD-LML (MAIN ASSY : IC5202)
• IEEE1394 Link IC
A
208
207
206
205
204
203
202
201
200
199
198
197
196
195
194
193
192
191
190
189
188
187
186
185
184
183
182
181
180
179
178
177
176
175
174
173
172
171
170
169
168
167
166
165
164
163
162
161
160
159
158
157
IFIROME
IC (L)
IC (L)
IC (L)
IC (PL)
IC (L)
HS_CLK
PLLDGND
PLLAGND
PLLAVDD
PLLDVDD
IC (L)
D15
2.5GND
D14
D13
D12
D11
D10
D9
3.3GND
3.3VDD
D8
D7
D6
D5
D4
D3
D2
D1
D0
WRZ
RDZ
A17
A16
3.3GND
A15
A14
2.5VDD
A13
A12
A11
3.3VDD
A10
A9
A8
A7
A6
A5
A4
A3
A2
Pin Arrangement
B
C
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
156
155
154
153
152
151
150
149
148
147
146
145
144
143
142
141
140
139
138
137
136
135
134
133
132
131
130
129
128
127
126
125
124
123
122
121
120
119
118
117
116
115
114
113
112
111
110
109
108
107
106
105
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
D
RESETB
PHY_D7
PHY_D6
PHY_D5
3.3VDD
PHY_D4
PHY_D3
PHY_D2
3.3GND
PHY_D1
PHY_D0
CTL1
CTL0
2.5VDD
SCLK
LREQ
LPS
LINKON
STREAM10
STREAM11
STREAM12
STREAM13
STREAM14
STREAM15
STREAM16
STREAM17
PACKETEN1
TSERROR1
TSRW1
SYNC1
3.3VDD
TSSUB1
PACKETEN2/VSYNC
TSERROR2/HSYNC
3.3GND
TSRW2/FLD
SYNC2
TSSUB2
2.5GND
STREAM20/VD0
STREAM21/VD1
STREAM22/VD2
STREAM23/VD3
STREAM24/VD4
STREAM25/VD5
STREAM26/VD6
STREAM27/VD7
AFS1
AFS2
VCLKI
VCLKO
3.3VDD
VPWM
MD0
MD1
3.3GND
MD2
MD3
MD4
MD5
MD6
MD7
3.3VDD
MD8
MD9
MD10
2.5VDD
3.3GND
MD11
MD12
MD13
MD14
MD15
MWE
MCAS
MRAS
MCLK
3.3VDD
MA0
MA1
MA2
3.3GND
MA3
MA4
MA5
MA6
MA7
MA8
MA9
MA10
2.5GND
MA11
ALRCK
ABCK
3.3VDD
PCM1
PCM2
AEMP1
3.3GND
IC (O)
AMCLKO
APWM
AMCLK44
AMCLK48
E
F
168
XV-DVR9H
1
2
3
4
A1
BR_MON
IC (PL)
DV_INT
IC (PL)
SCS
RXD
TXD
3.3GND
SCK
SI
SO
2.5GND
P_D15
P_D14
P_D13
3.3VDD
P_D12
P_D11
P_D10
P_D9
P_D8
P_D7
P_D6
P_D5
3.3GND
P_D4
P_D3
P_D2
3.3VDD
P_D1
P_D0
INT
IOCHRDY
IC (O)
IC (H)
IOR
RWZ
2.5VDD
CS
AD10
AD9
AD8
AD7
AD6
AD5
AD4
AD3
AD2
AD1
PSSEL1
PSSEL0
5
6
7
8
Block Diagram
A
High-speed
Internal ROM
192 kbytes
16-bit Timer
Unit D
<TMD>
CPU Core
RXD 150
High-speed
Internal ROM
60 kbytes
Host
Interface
<UART>
SCS 151
SCK 147
SO 145
175, 174, 172, 171,
169-167, 165-156
EEPROM
Interface
<CSI>
196, 194-189,
186-178
Memory
Controller
SI 146
A [17 : 0]
External
Flash ROM
Interface
TXD 149
D [15 : 0]
176 RDZ
B
177 WRZ
77 MCLK
76 MRAS
INTC
SDRAM
Interface
75 MCAS
74 MWE
92, 90-83,
81-79
MA [11 : 0]
73-69, 66-64,
62-57, 55, 54
RESETB 1
HS_CLK 202
System
Control
MD [15 : 0]
104 AMCLK48
103 AMCLK44
DV Codec Core
C
101 AMCLKO
96 PCM1
97 PCM2
Audio
Interface
102 APWM
98 AEMP1
93 ALRCK
51 VCLKO
FLD
HSYNC
50 VCLKI
VSYNC
VD [7 : 0]
TSSUB
SYNC
PACKETEN
94 ABCK
TSRW
STREAM [7 : 0]
Stream
Interface
53 VPWM
D
47-40
CS 117
AD [10 : 1]
116-107
Selector
Host
Inteface
IEEE1394 Link Core
37 SYNC2
34 TSERROR2 / HSYNC
P_D [15 : 0] 143-141, 139-132,
130-128, 126, 125
38 TSSUB2
Selector
26-19
INT 124
STREAM1 [7 : 0]
29 TSRW1
PSSEL [1 : 0] 106, 105
27 PACKETEN1
30 SYNC1
E
28 TSERROR1
Test
Block
LPS 17
LINKON 18
SCLK 15
LREQ 16
CTL [1 : 0] 12, 13
32 TSSUB1
2-4, 6-8,
10, 11
IFIROME 208
PHY_D [7 : 0]
Parallel Interface
33 PACKETEN2 / VSYNC
IOR 120
IOCHRDY 123
STREAM2 [7 : 0] / VD [7 : 0]
36 TSRW2 / FLD
RWZ 119
F
169
XV-DVR9H
5
6
7
8
1
2
3
4
Pin Function
A
(1) Link relation
No.
B
Pin Name
Function
Active
18
LINKON
I
Link-on signal input
Clock input
When LPS is active, input 0.
17
LPS
O
Link power status output
Link power OFF : 0
Link power ON : 2.7 MHz pulse output (20 dividing of host clock 54 MHz)
−
16
LREQ
O
Link request output
−
15
SCLK
I
Clock input for Link control
LPS is active : 49.152 MHz input
LPS = 0 0 : fixed
−
I/O
PHY/Link control signal input/output
−
I/O
Data input/output between PHY-Link
−
STREAM1 [7 : 0]
I/O
ISO data bus of stream interface 1
27
PACKETEN1
I/O
Packet enable signal input/output of stream interface 1
H/L
28
TSERROR1
I/O
Packet error signal input/output of stream interface 1
H/L
29
TSRW1
I/O
Data read/write enable signal input/output of stream interface 1
30
SYNC1
I/O
Frame synchronous signal input/output of stream interface 1
H/L
32
TSSUB1
I/O
Not used Connect to VDD or GND through a resistor.
H/L
STREAM2 [7 : 0]
I/O
ISO data bus of stream interface 2
33
PACKETEN2
I/O
Packet enable signal input/output of stream interface 2
H/L
34
TSERROR2
I/O
Packet error signal input/output of stream interface 2
H/L
36
TSRW2
I/O
Data read/write enable signal input/output of stream interface 2
37
SYNC2
I/O
Frame synchronous signal input/output of stream interface 2
38
TSSUB2
O
Not used
12, 13
CTL [1 : 0]
2-4, 6-8, 10,11 PHY_D [7 : 0]
26-19
47-40
C
I/O
−
−
−
−
−
H/L
−
Set to open.
(2) Video interface pins
No.
D
Pin Name
I/O
Function
Active
50
VCLKI
I
Video clock input (27 MHz)
−
51
VCLKO
O
Video clock output (27 MHz)
−
VD [7 : 0]
I/O
Video data signal
−
33
VSYNC
I/O
Video vertical sync. signal
L
34
HSYNC
I/O
Video horizontal sync. signal
L
36
FLD
I/O
Field index signal
−
53
VPWM
O
PWM signal for video PLL
−
47-40
E
F
170
XV-DVR9H
1
2
3
4
5
6
7
8
(3) Audio interface pins
No.
Pin Name
104
AMCLK48
103
AMCLK44
101
AMCLKO
96
PCM1
I/O
Function
Active
Audio master clock input for sampling frequency 48 kHz
−
I
Audio master clock input for sampling frequency 44 kHz
−
O
Audio master clock output
−
I/O
Audio PCM serial data
At 2ch : System 1 (data of audio block 1)
At 4ch : System 1
The above is default setting value. Input/output data of PCM 1 and PCM 2 is replaced
by Channel swap setting of an AUDIO_FUNC register.
−
−
I
97
PCM2
I/O
Audio PCM serial data
At 2ch : Mute
At 4ch : System 2 (data of audio block 2)
The above is default setting value. Input/output data of PCM 1 and PCM 2 is replaced
by Channel swap setting of an AUDIO_FUNC register.
Note: Cannot use it in DV decode.
98
AEMP1
O
PCM1 emphasis ON/OFF in PCM 1 output
H
93
ALRCK
I/O
Audio LR clock
L ch : High
R ch : Low
−
94
ABCK
I/O
Audio bit clock
−
AFS [2 : 1]
O
Audio sampling frequency
AFS2 AFS1
44.1 kHz
0
1
48 kHz
0
0
32 kHz
1
0
−
APWM
O
PWM signal for audio PLL
−
49, 48
102
A
B
C
(4) SDRAM interface pins
No.
Pin Name
I/O
Function
Active
77
MCLK
O
CLK pin connection of SDRAM
−
76
MRAS
O
RAS pin connection of SDRAM
−
75
MCAS
O
CAS pin connection of SDRAM
−
74
MWE
O
WE pin connection of SDRAM
−
MA [ 11 : 0]
O
Address pin connection of SDRAM
−
73-69, 66-64,
MD [ 15 : 0]
62-57, 55, 54
I/O
Data pin connection of SDRAM
Note: Process of pull-up or pull down is necessary.
So connect it to SDRAM directly.
−
92, 90-83,
81-79
D
E
F
171
XV-DVR9H
5
6
7
8
1
2
3
4
(5) Host interface pins
A
(a) Parallel interface pins
No.
B
Pin Name
I/O
Function
Active
117
CS
I
Chip select input of parallel interface
L
119
RWZ
I
Read and write control input of parallel interface
ISA type bus, SH-1 bus: Write strobe
68000 bus : Read/write selection signal
L
120
IOR
I
IO read control input of parallel interface
ISA type bus, SH-1 bus : Read strobe
68000 bus : Data strobe (DS)
L
123
IOCHRDY
O
Ready output of parallel interface
L
116-107
AD [ 10 : 1]
I
Address input of parallel interface
−
Data input/output of parallel interface
−
143-141, 139-132,
130-128, 126, 125 P_D [15 : 0]
I/O
(b) Serial interface pins
No.
Pin Name
I/O
Function
Active
149
TXD
I/O
Serial transmission data output of unsynchronous serial interface (UART)
−
150
RXD
I/O
Serial transmission data input of unsynchronous serial interface (UART)
−
(c) Others
No.
C
Pin Name
124
INT
106, 105
PSSEL [1 : 0]
I/O
O
I
Function
Active
Interrupt output to the outside
H
Parallel/serial interface selection
Input signal to select the outside interface which of parallel interface or serial interface.
PSSEL [1 : 0]
Select
00
Serial interface (UART)
01
Parallel interface (ISA type bus)
10
Parallel interface (68000 bus)
11
Parallel interface (SH-1 bus)
D
E
F
172
XV-DVR9H
1
2
3
4
−
5
6
7
8
(6) External ROM connection pins
(a) Flash ROM interface pins
No.
Pin Name
A
I/O
Function
Active
196, 194-189,
D [15 : 0]
186-178
I/O
External ROM data bus
Data bus in the external ROM access.
Process of pull-up or pull down is necessary.
175, 174, 172,
171, 169-167, A [17 : 1]
165-156
O
External ROM address bus
Address bus in the external ROM access.
Can addressing the 256k byte space.
−
O
ROM read
Strobe signal which shows a read cycle for external ROM.
It becomes the inactive in the idle state.
L
ROM write
Strobe signal which shows a write cycle for external ROM.
L
176
177
RDZ
WRZ
O
−
B
(b) EEPROM interface pins
No.
Pin Name
I/O
Function
Active
145
SO
I/O
Serial transmit data output of clock-synchronous system serial interface (CSI)
−
146
SI
I/O
Serial receive data input of clock-synchronous system serial interface (CSI)
−
147
SCK
I/O
Clock output of clock-synchronous system serial interface (CSI)
−
151
SCS
I/O
Chip select output of clock-synchronous system serial interface (CSI)
−
C
(7) Clock and reset pins
No.
1
202
Pin Name
RESETB
HS_CLK
I/O
Function
Active
I
Reset
RESETB input is asynchronous input. When a signal of fixed low-level width is input
without relation to an operation clock, take precedence of all operation, and reset the
system. Note: RESETB is low-active.
L
I
Host clock
Clock input pin which is supplied to CPU core and built-in peripheral I/O.
Please input 27 MHz clock. Perform 2 multiply with internal PLL by 27 MHz clock, 54
MHz clock is supplied to CPU core and internal peripheral I/O.
−
D
E
F
173
XV-DVR9H
5
6
7
8
1
2
3
4
(8) Power supply and ground pins
No.
A
Pin Name
5, 31, 52, 63,
78, 95, 127, 3.3VDD
140, 166, 187
B
14, 67,
118, 170
2.5VDD
39, 91,
144, 195
2.5GND
9, 35, 56, 68,
82, 99, 131, 3.3GND
148, 173, 188
I/O
Function
Active
−
3.3V power supply
3.3V positive power supply pins. Power supply for 3.3V interface I/O.
−
−
2.5V power supply
2.5V positive power supply pins. Power supply for internal each block.
−
−
Ground pins
Connect all GND pins to the common ground.
−
−
199
PLLAVDD
−
Analog power supply for multiply circuit
Analog positive power supply pin for PLL. Supply 2.5V.
−
200
PLLAGND
−
Analog ground for multiply circuit
Analog ground for PLL
−
198
PLLDVDD
−
Digital power supply for multiply circuit
Digital positive power supply pin for PLL. Supply 2.5V.
−
201
PLLDGND
−
Digital ground for multiply circuit
Digital ground for PLL
−
121
IC (H)
−
Internally connected pin
Connect to VDD directly.
−
197, 203,
205-207
IC (L)
−
Connect to ground directly.
−
−
Connect to ground through a resistor.
−
−
Set to open.
−
C
152, 154, 204 IC (PL)
100, 122
IC (O)
(9) Others
D
No.
Pin Name
153
DV_INT
I/O
Function
Active
I/O
Interrupt pin to the outside for the DV status read out.
H
Shows the bus reset occurred. There is some delay after real bus reset occurred
because of set by the built-in firmware.
H
ROM operation selection input
Set to 1 normally.
−
155
BR_MON
I/O
208
IFIROME
I
E
F
174
XV-DVR9H
1
2
3
4
5
6
7
8
7.3 DIAGNOSIS METHOD OF THE HDD
How to diagnose failure of the hard disc drive (HDD)
A
Purpose:
With use of the HDD-diagnostic program contained in the product itself, physical errors on the HDD can be diagnosed. Use
this program to diagnose whether or not the HDD is in failure when one of the symptoms indicated below is recognized, or
when a failure in the HDD is suspected.
Symptoms of failure in HDD:
(1) HDD Error
(2) Failure in HDD recording or playback
(3) HDD not recognized
Tool to be used:
Remote control unit for servicing (GGF1381)
B
1. Flow of HDD diagnosis
(1) Flowchart of HDD diagnosis
Check the HDD Information.
Is something wrong?
Yes
C
No
Execute Self-Test.
Has an error occurred?
Yes
No
D
Execute Extended Self-Test.
Result of the diagnosis: Failure in HDD
Measures to be taken: Replacement of HDD
Yes
No
Execute writing test, if required.
E
Execute HDD Read/Write Check.
Yes
No
F
Result of the diagnosis: No abnormality
175
XV-DVR9H
5
6
7
8
1
2
3
4
(2) Overview of the diagnosis items
A
HDD Information
SELF TEST
B
This is a display for checking the HDD information, such as the model name of the
HDD, continuous power-on time, authentication status, and results of the diagnosis on
the end of service life.
Time required for testing: Approx. 30 sec.
This is a simplified diagnosis for the HDD.
A serious failure in the HDD can be detected with this test.
Time required for testing: Approx. 90 sec.
EXTENDED SELF TEST
This is a reading test across all sectors of the HDD.
Data recorded on the HDD will not be erased, because no writing operation is
performed.
Time required for testing: Approx. 40 min/80 GB
HDD Read / Write Check
This is a writing, reading, and comparing test across all sectors of the HDD.
All data recorded on the HDD will be erased, because all the data are to be
overwritten. Be sure to obtain your client's consent beforehand.
Time required for testing: Approx. 7 hours/80 GB
C
2. How to start or terminate the diagnostic program
How to start/terminate the diagnostic program
D
Use the remote control unit for servicing.
How to start: Press the "ESC", "CX", "0", and "1" keys simultaneously.
How to terminate: Press the "ESC" key.
Do NOT perform other operations on the unit while the HDD diagnosis is in progress. Although the diagnostic program is
designed to function independently from the unit's functions, an operation on the unit during a diagnosis may cause a
malfunction.
The status of the unit recommended during diagnosis is as follows: All stop, no timer recording, and Input selection to L1-L3.
E
F
176
XV-DVR9H
1
2
3
4
5
6
7
8
3. Diagnosis procedures
A
1
Display the menu on the screen.
The menu indicated below is displayed when the diagnostic program is started. To enter each mode, press the
corresponding key "1"-"4" on the remote control unit for servicing.
Tests to be executed
1 HDD Information:
Check of the HDD information
2 S.M.A.R.T. DST:
Executing a simplified test or a reading test of all data
3 HDD R/W Check:
Executing a writing/reading test of all data. All data on the
HDD will be erased if this test is executed.
B
Note: "2. S.M.A.R.T. Attribute . . ." is not to be used.
2
Check the HDD information.
Press the "1" key on the remote control unit for servicing. Check the following data:
Model: Is the correct model name of the HDD displayed?
Recog. No: Is a positive value displayed?
SMART threshold: Is "not exceeded" displayed?
C
Detailed description
1 Model:
For the correct model name, refer to the service manual of
the unit.
2 Recog. No:
Positive value: The HDD has been authenticated.
Negative value: The HDD has not been authenticated.
3 SMART threshold:
exceeded: The HDD has come to the end or near the end of
its service life.
not exceeded: The HDD has not reached the end of its
service life.
D
To return to the menu screen, press the "Clear" key.
E
F
177
XV-DVR9H
5
6
7
8
1
3
A
2
3
4
Execute Self-Test.
Press the "3" key on the remote control unit for servicing while the menu screen is displayed.
When the following screen is displayed, press the "1" key to start the Self-Test.
B
The progress of the test is displayed on the screen. The percentage remaining of the test is displayed on the screen,
and the test is terminated when the percentage reaches 00%.
Check whether or not an error has occurred after the test is finished.
Diagnosis results
• Without an error: ". . . Completed" is displayed.
Then, proceed to the Extended Self-Test.
• With an error: ". . . Error" is displayed. Look at the number in Test Result.
If the place value for tens is 1 or 2, execute the Self-Test again.
If it is from 3 to 7, the HDD must be replaced.
C
Note: If the result of the second test is the same, replacement of the HDD is required.
Example: No error
Example: With an error
D
E
F
178
XV-DVR9H
1
2
3
4
5
4
6
7
8
Execute the Ext (Extended) Self-Test.
A
B
Press the "3" key while the menu screen is displayed, then the "2" key on the remote control unit for servicing.
The Extended Self-Test starts. The percentage remaining of the test is displayed on the screen, and the test is
terminated when the percentage reaches 00%. Check whether or not an error has occurred after the test is finished.
Diagnosis results
• Without an error: ". . . Completed" is displayed.
If no error occurs up until this stage, HDD operations are normal except for writing operations.
If the unit has a failure in HDD playback, a block other than the HDD may be in failure.
If the unit's failure is in HDD recording, however, the next HDD Read/Write Check must be executed to test
writing operations.
• With an error: ". . . Error" is displayed.
Look at the number in Test Result.
If the place value for tens is 1 or 2, execute the Ext Self-Test again.
If it is from 3 to 7, the HDD must be replaced.
Note: If the result of the second test is the same, replacement of the HDD is required.
Example: No error
C
Example: With an error
D
E
F
179
XV-DVR9H
5
6
7
8
1
5
A
2
3
4
Execute the HDD R/W Check.
Before executing this test, be sure to obtain your client's consent for erasure of HDD data.
Press the "4" key while the menu screen is displayed then the "SKIP ¢" key to start the HDD R/W Check.
To stop executing the test (OFF) while it is in progress, press the "SKIP 4" key.
The display on the left indicates the progress of the test.
The percentage of the test progress is displayed on the screen,
and the test is finished when the percentage reaches 100%.
B
Detailed description on each item on the screen
• Write Error: Number of write errors
• Read Error: Number of read errors
• Compare Error: Number of comparison errors
• Current LBA: The address during testing
• Max LBA: Highest address number of the HDD
• Progress: Percentage of test progress (%)
• Remain Time: Estimated time required for finishing the test
across all sectors.
Estimated time: 7 hours/80 GB
C
D
Diagnosis results
• If no error occurs in any of the Write/Read/Compare items, the HDD is in normal condition and is not required to
be replaced. A block other than the HDD is in failure.
• If any error occurs, the HDD must be replaced.
To terminate the diagnostic program, press the "ESC" key.
E
F
180
XV-DVR9H
1
2
3
4
5
6
7
8
7.4 CAUTIONS ON HANDLING THE HDD
(1) Cautions on Handling the HDD
• The HDD is very sensitive to shocks and vibrations. Care must be taken especially during operation (when the power is on).
• The HDD is very sensitive to electrostatic charges.
• Rapid change in temperature or humidity may cause deterioration of the HDD.
A
Note: After receiving damage caused by any above-mentioned factors, the HDD may operate normally for dozens or some hundreds of
hours but then suddenly crash. If you are certain you have damaged a new repair part (HDD) while making repairs, do not use the
part.
The HDD is about 10 times as sensitive to shock
during operation than during nonoperation.
Reference: Main specifications on damage to the HDD
Shock G
(acceleration)
Temperature
change
During operation
During nonoperation
<approx. 20 G
<approx. 200 G
Falling
distance
Landing Granite
surface surface
0.5 inch / 12.7 mm
< 20°C/hour
Moisture change
Reference: Estimate value of falling distance vs. shock (G)
when the HDD is dropped without protection
< 20%/hour
Concrete Synthetic-resin- Antistatic
coated table
floor
sponge
387
217
200
B
26
1.0 inch / 25.4 mm
595
457
310
37
2.0 inch / 50.8 mm
1133
600
680
70
4.0 inch / 101.6 mm
1795
1040
1050
267
(2) Cautions on handling the product on which the HDD is mounted or the HDD as a repair part, and
examples of dangerous handling
[Cautions on handling the product on which the HDD is mounted]
• While the unit is turned on, the HDD is always in operation. Be sure NOT to impart shock to the unit.
÷ Examples of dangerous handling: while the power is on
• Bumping on the bonnet
• Dropping an object, such as a small screwdriver or remote control unit, onto the bonnet, or bumping an object against the cabinet
• Moving the unit by dragging
• Stacking another product on the unit
Note: Be sure NOT to impart shock, such as bumping or hitting a screwdriver against the HDD, during diagnosis with the bonnet open.
C
÷ Examples of dangerous handling: while the power is off
• Imparting strong shock, although the HDD is more resistant to shock when the power is off
• Dropping the unit from a height of several centimeters, or after lifting one side of the unit up, then letting the unit drop.
• Do NOT move the unit immediately after the power is turned off. Wait at least 30 seconds after the indication on the FL display changed
from POWER OFF to the clock indication before moving the unit.
If the AC power cord is accidentally disconnected before turning the unit off, wait at least for one minute before moving it. In this case,
damage to the HDD caused by sudden shutoff may be small, because the emergency relief mechanism is activated. However, if sudden
shutoff occurrs during recording or playback, recorded data may be damaged. Be sure to check operations.
D
[Cautions on handling the HDD as a repair part]
1. Handle the HDD in a safe environment:
• Handle the HDD over an antistatic pad that can also absorb shock.
• Wear wrist bands to prevent electrostatic charges generated in your body from affecting the HDD.
2. The following must be observed when handling the HDD:
• Handle one HDD at a time. Do NOT hold several HDDs at the same time.
• Grip the HDD on both sides so that you do not touch its terminals or circuit boards.
• Do NOT stack one HDD onto another HDD (even if the HDDs are protected in antistatic bags).
• Do NOT bump the HDDs against one another.
• Do NOT bump any tool, such as a screwdriver, or other hard object against the HDD.
• When a repair part (HDD) is transported and there is a large temperature difference between outdoors and indoors, to the indoor, leave
it in its package for about a half day to gradually cool or warm the HDD to room temperature before unpacking it.
[Notes on packing for shipment]
• When returning a defective HDD for analysis, handle with care as if it were a good product. Otherwise, the results of analysis may not be
correct.
• When packing, use the antistatic bag and packing materials in which the repair part for service was delivered. Attach a copy of the slip for
service or a memo stating symptoms in as much detail as possible.
181
XV-DVR9H
5
6
7
8
E
F
1
2
3
4
Outline and part No. of the HDDs
Maxtor
A
B
*Pioneer's part No. is not stamped.
Model
Name
Capacity
XV-DVR9H
80GB
Western Digital
Pioneer's
Manufacture's
Part No.
Part No.
(for service)
VXF1010
4R080L0-
Seagate
Pioneer's
Pioneer's
Manufacture's
Manufacture's
Part No.
Part No.
Part
No.
Part No.
(for service)
(for service)
WD800BB
-xxHEAx
VXF1043
VXF1036
ST38001&ACE-
• When replacing the HDD, carefully check the capacity and manufacturer's part No. on the part label to avoid replacing with a similar but
inappropriate product. You can also check the model No. of the mounted HDD on the Service mode screen.
• Do NOT use repair parts, such as commercially available HDDs, other than those designated above, as their functions, performance or
reliability cannot be guaranteed.
Western Digital (80GB)
Western Digital (160GB) (Reference)
Maxtor
Capacity
Manufacturer's
part No.
Date of
Manufacturer
C
Seagate
Note : The body of HDD 80GB and 160GB/250GB types
(Reference) of Western Digital are different.
Capacity
How to read the information of Seagate HDD
Manufacturer's
part No.
Ex. Date Code 0435x
04 year (from July)
manufactured on 35th week
Date of
Manufacturer
D
Fig.1 Location of the data on capacity and part No. of the HDD
E
Confirmation of the jumper pin location of the HDD
Maxtor
Western Digital
Seagate
F
Jumper pin
Setting : Cable Select(CS)
Jumper pin
Jumper pin
182
XV-DVR9H
1
2
3
4
5
6
7
8
7.5 DISC/CONTENT FORMAT
Disc / content format playback
compatibility
A
General disc compatibility
DVD-R/RW compatibility
This system is compatible with a wide range of disc types
(media) and formats. Playable discs will generally feature
one of the following logos on the disc and/or disc
packaging. Note however that some disc types, such as
recordable CD and DVD, may be in an unplayable
format–see below for further compatibility information.
This system will play and record DVD-R/RW discs.
Compatible media:
• DVD-RW Ver. 1.1, Ver. 1.1 / 2x and Ver. 1.2 / 4x
• DVD-R Ver. 2.0 and Ver. 2.0 / 4x / 8x
Recording formats:
• DVD-R: DVD-Video format (Video mode)
DVD-Video DVD-R
Audio CD Video CD
• DVD-RW: Video Recording (VR) format and DVDVideo format (Video mode)
DVD-RW
CD-R
Older models of DVD recorders and DVD writers may
reject DVD-RW Ver. 1.2 / 4x discs. To share DVD-RW
discs between this recorder and an older recorder/writer,
we recommending Ver. 1.1 discs1.
CD-RW
The following table shows older Pioneer DVD recorder
compatibility with DVD-RW Ver. 1.2 / 4x discs.
Model
Playable
DVR-7000
Fujicolor CD
1,2,3
Yes
DVR-3100/ DVR-5100H
• Also compatible with KODAK Picture CD
•
•
B
is a trademark of DVD Format/Logo Licensing
Corporation.
is a trademark of Fuji Photo Film Co. Ltd.
This system also supports the IECís Super VCD standard.
Compared to the Video CD standard, Super VCD offers
superior picture quality, and allows two soundtracks to
be recorded. Super VCD also supports the widescreen
size.
VIDEO
CD
Super Video CD (Super VCD)
Yes1
Recordable
No
No
C
1
Discs should be finalized in this recorder before playing. Unfinalized
VR mode and Video mode discs may not play.
2
Cannot read the CPRM information will show in the display when
you load a disc. However, this will not affect playback.
3
Copy-once protected disc titles will not play.
CD-R/RW compatibility
This system cannot record CD-R or CD-RW discs.
• Compatible formats: CD-Audio, Video CD/Super
VCD, ISO 9660 CD-ROM* containing MP3, WMA or
JPEG files
* ISO 9660 Level 1 or 2 compliant. CD physical format:
Mode1, Mode2 XA Form1. Romeo and Joliet file
systems are both compatible with this system.
D
• Multi-session playback: Yes (except CD-Audio and
Video CD/Super VCD)
• Unfinalized disc playback: CD-Audio only
E
F
183
XV-DVR9H
5
6
7
8
1
2
3
Compressed audio compatibility
JPEG file compatibility
• Compatible media: CD-ROM, CD-R, CD-RW
A
• Compatible formats: MPEG-1 Audio Layer 3 (MP3),
Windows Media Audio (WMA)
• Compatible formats: Baseline JPEG and EXIF 2.2*
still image files
* File format used by digital still cameras
• Sampling rates: 44.1 or 48kHz
• Sampling ratio: 4:4:4, 4:4:2, 4:2:0
• Bit-rates: Any (128Kbps or higher recommended)
• Horizontal resolution: 160 – 5120 pixels
• Variable bit-rate (VBR) MP3 playback: Yes
• Vertical resolution: 120 – 3840 pixels
• VBR WMA playback: No
• Progressive JPEG compatible: No
• WMA encoder compatibility: Windows Media Codec
8 (files encoded using Windows Media Codec 9 may be
playable but some parts of the specification are not
supported; specifically, Pro, Lossless, Voice and VBR)
• File extensions: .jpg, jpeg, jif, jfif (must be used for the
system to recognize JPEG files – do not use for other
file types)
• DRM (Digital Rights Management) file playback: No
(see also DRM in the Glossary)
B
4
• File extensions: .mp3, .wma (these must be used for
the system to recognize MP3 and WMA files ñ do not
use for other file types)
• File structure: The system can load up to 99 folders /
999 files at one time (if there are more files/folders that
this on the disc then more can be reloaded)
PC-created disc compatibility
• File structure: Up to 99 folders / 999 files (if these
limits are exceeded, only files and folders up to these
limits are playable)
Discs recorded using a personal computer may not be
playable in this unit due to the setting of the application
software used to create the disc. In these particular
instances, check with the software publisher for more
detailed information.
WMA (Windows Media Audio) compatibility
Discs recorded in packet write mode (UDF format) are
not compatible with this system.
Check the DVD-R/RW or CD-R/RW software disc boxes
for additional compatibility information.
C
The Windows Media ® logo printed on the box indicates
that this system can playback Windows Media Audio
content.
WMA is an acronym for Windows Media Audio and refers
to an audio compression technology developed by
Microsoft Corporation. WMA content can be encoded by
using Windows Media ® Player version 7, 7.1, Windows
Media ® Player for Windows ® XP, or Windows Media
Player 9 Series.
D
Microsoft, Windows Media, and the Windows logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other countries. ®
7.6 CLEANING
E
Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools:
F
Position to be cleaned
Cleaning tools
Pickup lenses
Cleaning liquid : GEM1004
Cleaning paper : GED-008
Position to be cleaned
Cleaning tools
Fans
Cleaning paper : GED-008
184
XV-DVR9H
1
2
3
4
5
6
7
8
8. PANEL FACILITIES
Front panel
A
1
2 3 4
STANDBY/ON
VOLUME
PLA
Y
5
6
7 8 9 10
0 OPEN/CLOSE HDD/DVD
STOP
STOP REC
REC
PULL OPEN
B
DV IN/OUT
14
13
15
12
11
1 STANDBY/ON
Press to switch the system on/into standby.
9 & STOP REC
Press to stop recording.
2 VOLUME buttons
Use to adjust the volume.
10 REC
Press to start recording.
3 PLAY
Press to start or restart playback.
11 DV IN/OUT jack
Digital input/output jack for use with a DV camcorder.
4 STOP
Press to stop playback.
12 Front panel display
C
13 IR remote sensor
5 Disc tray
14 Front panel inputs and headphones jack
Pull the cover down where indicated to access the front
panel input jacks. Especially convenient for connecting
camcorders and other portable equipment.
6 OPEN/CLOSE
Press to open/close the disc tray.
7 HDD/DVD
Press to switch between the hard disk drive (HDD) and
DVD for recording and playback.
D
15 HDD indicator
Lights blue when the HDD is selected.
8 -/ +/
Use to change TV channels, skip chapters/tracks, etc.
E
F
185
XV-DVR9H
5
6
7
8
1
2
Display
1
3
2
3
4
4
5
A
9
8
4
1 HDD and DVD playback / recording indicators
B
Arrows indicate the copy direction between the HDD
(
) and DVD (
).
2 SR+
Lights when the SR+ control mode is on.
NICAM
Lights when the broadcast audio is NICAM encoded.
MONO
Lights when a FM radio mono reception is selected.
ST
Lights when a FM radio broadcast is being received in
auto stereo mode.
DVD / R / W
Indicates the type of recordable DVD loaded: DVD-R or
DVD-RW.
V
Lights when an unfinalized Video mode disc is loaded.
PL
Lights when a VR mode disc is loaded and the system is in
Play List mode.
Indicates which channels of a bilingual broadcast are
recorded.
D
6
D
Lights during playback of a Dolby Digital source.
Lights during Dolby Pro Logic II decoding.
3 PLAY / ¶ REC indicators
Lights during playback / recording; blinks when playback
/ recording is paused.
C
7
Lights when a radio broadcast is being received.
Lights when RDS information is being displayed.
Lights during playback of a DTS source.
Lights when one of the Advanced or Front Surround
listening modes is selected.
5 F.SURR.
Lights when playing in Front Surround mode.
DIALOG
Lights when dialog enhancement is on.
6 Speaker indicators
These show which speakers are being used to output the
current source (they are not placement diagrams). The
illustrations below show some example displays.
5.1 channel surround sound
Stereo (2.1 channel) sound
3.1 channel sound
7 REM
Lights when the character display is showing the
remaining available recording time.
kHz / MHz
Indicates the unit of the frequency shown in the
character display (kHz for AM, MHz for FM).
3
Lights when a timer recording has been set.
(Indicator blinks if the timer has been set to DVD but
there isn't a recordable disc loaded, or the timer has been
set to HDD but the HDD is not recordable).
AUTO
Lights when Auto Start Recording has been set, and
during Auto Start Recording.
OVER
Lights when the LINE1 or LINE2 input level is too high.
VPS / PDC
Lights when receiving a VPS/PDC broadcast during a
VPS/PDC-enabled timer recording.
NTSC
Lights when playing NTSC format video.
ANA FIX
Lights when the Analog out mode is set to Fix.
MUTE
Lights to indicate that the system is muted.
E
8 Character display
9 Recording quality indicators
FINE
Lights when the recording mode is set to FINE (best
quality).
SP
Lights when the recording mode is set to SP (standard
play).
LP
Lights when the recording mode is set to LP (long play).
EP
Lights when the recording mode is set to EP (extended
play).
MN
Lights when the recording mode is set to MN (manual
recording level) mode.
F
186
XV-DVR9H
1
2
3
4
5
6
Remote control
2
3
VOLUME
–
4
5
ONE TOUCH COPY
MUTE
HDD
DVD
+
FM/AM
AUDIO INPUT
6
CHANNEL
7
VIDEO INPUT
TV/DVD
TV DIRECT REC
9
CLEAR
DISC NAVIGATOR
8
10
B
8 VIDEO INPUT
Press to change the input for recording and playback.
12
TUNE +
TOP MENU
SR+
13
7 Numeric buttons and CLEAR
Use the number buttons for track/chapter/title selection;
channel selection, and so on.
Use CLEAR to clear an entry and start again.
DVD MENU
11
ST –
PLAY LIST
SYSTEM
SETUP
ST +
ENTER
HOME
MENU
REV SCAN
PAUSE
PLAY
STOP
PREV
REC
17
15
CH LEVEL
TEST TONE
16
NEXT
STOP REC
FWD SCAN
BACK
CM
SURROUND
AUDIO
STEP/SLOW
REC MODE NAVI MARK
18
ADVANCED
SUBTITLE
DIALOGUE
ANGLE
CHANNEL
VOLUME
STANDBY/ON
SOUND
PLAY MODE
INPUT
C
20
21
10 TV DIRECT REC
Press to start recording whatever channel your TV is set
to.
+ SHIFT: TV/DVD
Press to switch between ‘TV mode’, in which you get
the picture and sound from the TV's tuner, and ‘DVD
mode’, in which you get picture and sound from the
system's tuner (or an external input).
SKIP
19
9 SHOWVIEW
Press, then use the number buttons to enter a ShowView
programming number for timer recording.
RETURN
TUNE –
14
A
6 CHANNEL +/–
Press to change the channel of the built-in TV tuner.
DIG/ANA
SHOWVIEW
8
DVD
Press to select the DVD for recording or playback.
FM/AM
Press to select the built-in radio tuner.
AUDIO INPUT
Press repeatedly to select one of the external audio
inputs (DIGITAL or ANALOG).
1
STANDBY/ON
7
SHIFT
TV CONTROL
DISPLAY
DIMMER
11 DISC NAVIGATOR / TOP MENU
Press to display the Disc Navigator screen, or the top
menu if a DVD-Video disc is loaded.
+ SHIFT: SR+
Press to setup SR+ and switch SR+ control on/off.
22
Important
• Functions printed in green on the remote control are
accessed by pressing the button indicated while holding
down the SHIFT button.
1 MUTE
Press to mute all audio from the speakers and headphones.
Press again to cancel and restore the sound.
2 STANDBY/ON
Press to switch the system on or into standby.
3 ONE TOUCH COPY
Press to start One Touch Copy of the currently playing title
to DVD or the HDD.
4 VOLUME +/–
Use to adjust the volume.
5 Function select buttons
HDD
Press to select the hard disk (HDD) for recording or
playback.
12 PLAYLIST / DVD MENU
Press to switch between Original and Play List content
on VR mode discs, or display the disc menu if a DVDVideo disc is loaded.
+ SHIFT: SYSTEM SETUP
Use to access the menu system for surround sound
setup, tuner settings and so on.
D
13 » /«/| /\ (cursor buttons) and ENTER
Used to navigate all on-screen displays. Press ENTER to
select the currently highlighted option.
TUNE +/–
Use to tune the radio.
ST +/–
Use to select station presets when listening to the radio.
E
14 HOME MENU
Press to display the Home Menu, from which you can
navigate many the functions of the system.
+ SHIFT: TEST TONE
Use to output the test tone (for speaker setup).
F
187
XV-DVR9H
5
6
7
8
1
A
B
C
D
2
3
15 RETURN
Press to go back one level in the on-screen menu or
display.
+ SHIFT: CH LEVEL
Use to adjust the speaker level.
16 Playback controls
1 REV SCAN / FWD SCAN ¡
Press to start reverse or forward scanning. Press again
to change the speed.
3 PLAY
Press to start playback.
8 PAUSE
Press to pause playback or recording.
7 STOP
Press to stop playback.
CM BACK (commercial back)
Press repeatedly to skip progressively backward through
the audio or video playing.
CM SKIP (commercial skip)
Press repeatedly to skip progressively forward through
the audio or video playing.
4 PREV / NEXT ¢
Press to skip to the previous or next title/chapter/track/
folder; or to display the previous or next menu page.
STEP/SLOW During playback, press to start slow-motion playback;
while paused, press to show the previous or next video
frame.
4
PLAY MODE
Press to display the Play Mode menu (for features such
as search, repeat and program play).
+ SHIFT: SOUND
Press to access the sound menu, from which you can
adjust bass and treble, etc.
20 TV CONTROL
After setting up, use these controls to control your TV.
21 SHIFT
Press to access functions on the remote printed in green.
22 DISPLAY
Displays/changes the on-screen information displays.
Also changes RDS displays.
+ SHIFT: DIMMER
Press to switch between normal and dimmed front panel
display.
17 Recording controls
REC
Press to start recording. Press repeatedly to set the
recording time in blocks of 30 mins.
& STOP REC
Press to stop recording.
REC MODE
Press repeatedly to change the recording mode
(picture quality).
18 NAVI MARK
Press to select a thumbnail picture for the current title for use
in the Disc Navigator screen.
19 DVD playback functions and surround sound
mode/sound enhancement buttons
AUDIO
Changes the audio language or channel. (When no disc
is playing or recording, press to change the tuner audio.)
+ SHIFT: SURROUND
Use to select a Surround mode.
SUBTITLE
Displays/changes the subtitles included in multilingual
DVD-Video discs.
+ SHIFT: ADVANCED
Use to select an Advanced Surround mode.
ANGLE
Switches camera angles on discs with multi-angle
scenes.
+ SHIFT: DIALOGUE
Use to select a Dialogue mode.
E
F
188
XV-DVR9H
1
2
3
4
5
6
7
8
A
B
C
D
E
F
189
XV-DVR9H
5
6
7
8
1
2
3
4
7 Jigs list
A
Name
Service Remote Control Unit
DVD Test Disc (DVD-Video)
DVD Recorder Data Disc
Extension Cable
Jig No.
GGF1381
GGV1025
GGV1179
GGD1315
Remarks
adjustment, diagnosis
Check of DVD-Video
diagnosis (ID data setting)
diagnosis (Extension for CONTROL- JACK)
B
C
D
E
F
190
XV-DVR9H
1
2
3
4

DVD-RW/HDD TUNER

Transcription

Similar documents

Die BUCHSTAVIER - Das Dosierte Leben

preliminary - Audio e Video Center