October 2012 Newsletter

October 2012
2012 Issue 7
Monthly Mtech Enews
Product News
www.turck.com
Overmolded Mil-Spec Connectors Provide a Rugged, Turnkey Solution for Harsh Applications
TURCK introduces new overmolded Mil-Spec Connectors for rugged applications. Offering a more robust
connectivity solution than field-assembled versions, these Mil- Spec Connectors are 100 percent factory tested to
ensure optimal performance for applications in harsh environments, including automotive, mobile equipment and
oil and gas.
Featuring a unique overmolded design, TURCK Mil-Spec Connectors eliminate field assembly, soldering and
wiring—allowing operators to reduce downtime and maintenance labor and costs. Overmolded connectors also
provide the flexibly to seal to a wide variety of cable types. For easy application integration, these Mil-Spec
Connectors are compatible with other TURCK products and standard Mil-Spec receptacles.
“Designed with our new, rugged molding technology, Mil-Spec connectors provide quick and easy connection for
instrumentation and power applications,” said Jay Bartsias, Product Manager, Connectivity, TURCK. “Plus, with the
advantage of built-to-order, custom capabilities, our customers can employ a complete, turnkey solution no matter
what their application demands.”
TURCK overmolded Mil-Spec Connectors are available in shell sizes 8-24. They meet NEMA 1, 3, 4 and 6P and
are rated IP67 and IP68. Cable options include NEK 606, ABS and IEEE 1580.
Mil-Spec Threaded/MIL-DTL-5015 Series
• Full threaded connector for tight seal
• Ideal fit for commercial applications
• Provides more options for power applications then bayonet styles
Mil-Spec Bayonet/MIL-DTL-26482 Series
• Allows quick connect/disconnect
• Good fit for applications involving vibration factors
• Easy Installation
• “Clicks” into place providing positive feedback from connector to
know it is locked on
• Offers higher pole counts for applications with a high number of
circuits or signals
Mil-Spec Reverse Bayonet/GT Series
• Allows quick connect/disconnect
• Good fit for applications involving vibration factors
• Easy installation
• “Clicks” into place providing positive feedback from connector
to know it is locked on
• Ideal fit for applications requiring to be connected or
disconnected frequently
BL67 Ethernet Gateway Delivers Extended Multiprotocol Communication Capabilities
TURCK announces the BL67 Multiprotocol Ethernet gateway for
Ethernet/IP™ and Modbus™ TCP/IP. Designed to provide a reliable
communication solution for on-machine, modular I/O applications, the
BL67 is ideal for use in environments where conditions may not be
conducive to traditional I/O.
Featuring TURCK’s unique Multiprotocol technology, the BL67
gateway combines multiple Ethernet protocols in a single device, yet
only allows one Ethernet master to control the outputs while the
input and diagnostic data is available to the other protocols. The BL67
offers isolated power for high density digital inputs and outputs, analog
I/O including temperature inputs, the ability to elevate RFID, SSI, serial,
encoder, and counter I/O to Industrial Ethernet Networks for flexible
application requirements. An integrated Ethernet switch allows a line
topology between multiple gateways without using an external switch,
eliminating the need for additional cable runs to the PLC.
The TURCK BL67 Ethernet gateway with Multiprotocol technology offers users the exclusive advantage for their
device to automatically configure itself based on the Ethernet host system that will be deployed. This simplifies
operations for customers who manufacture or design equipment for an end-user base that has differing
preferences between Industrial Ethernet protocols.
www.mtechmn.com
Inside this Issue:
 Turck Product News
- Overmolded Mil-Spec
Connectors Provide a Rugged,
Turnkey Solution for Harsh
Applications
- BL67 Ethernet Gateway
Delivers Extended
Multiprotocol Communication
Capabilities
- New Minifast Splitters and Tees
That Provide Voltage
Monitoring for DeviceNet
Applications
- FGEN AIM Stations for
Industrial Ethernet
Applications
- TURCK website now has 3D
drawings of many of their
sensors available for download
 Banner Product News
- High-Power Linear Back Lights
for Vision Systems
- Illuminated-base Flush Mount
Emergency Stop Buttons
- R-GAGE QT50R-AFH Sensor
- R-GAGE QT50R-AF2W Sensor
- EZ-LIGHT® K50 Beacon
- Lensed WLS28 Work Light Strip
 Exlar Product News
- 90mm K Series Universal
Linear Actuator
 PULS Educational video
- The importance of Efficiency
when selecting a Power Supply
Page 2
2012 Issue 7
Monthly Mtech Enews
Product News
www.turck.com
New Minifast Splitters and Tees That Provide Voltage Monitoring for DeviceNet Applications
TURCK introduces new 7/8-16UN minifast tees, splitters and in-line diagnostic devices, designed for use in DeviceNet applications, including CAN networks and mobile equipment. Models are available in a standard option
for classic DeviceNet use and a voltage monitoring version that contains an integrated circuit board to serve as a
diagnostic tool. Voltage monitoring tees and splitters help troubleshoot and prevent downtime with LEDs that
report normal, over-voltage and under-voltage conditions.
“We saw a need from our DeviceNet customers for tees and splitters that could monitor voltage for areas in
their networks where they encounter voltage issues,” said Abdi Ayanle, Product Manager at TURCK. “The addition of the minifast splitters and tees allows our customers to effectively address trouble areas in their network
to ensure reliable operation.”
The splitters provide parallel wiring, which simplifies installations. The ‘h’ configuration contains a tee connected
to the main trunk line with one parallel premolded cable drop, providing a quick, convenient and space-saving
way to add additional cabling within the cable tray. The splitters may be specified with any gender; negating the
traditional male to female connection requirement. Additionally, the in-line diagnostic devices may be used as
gender changers to connect a male to male or female to female cordset.
Designed to accommodate diverse conditions, the minifast splitters and tees can handle up to 30 volts in temperatures ranging from -40 to 105 degrees C. The splitters and tees also feature an IP67 environmental protection
rating, providing an ideal solution for voltage trouble spots in harsh conditions.
Product Specifications
• 30 Volts
• -40 to 105 C
• IP67 rated
FGEN AIM Stations for Industrial Ethernet Applications
TURCK announces the FGEN Advanced I/O Module (AIM) station for Industrial Ethernet. Designed to provide dependable communication capabilities, the FGEN AIM station elevates digital inputs and outputs to Industrial Ethernet networks. The FGEN is ideal for use in on-machine, fixed I/
O applications in environments where conditions may not be conducive to traditional I/O.
For an easy-to-deploy Industrial Ethernet solution, the FGEN features TURCK’s Multiprotocol technology, which was developed to simplify Industrial Ethernet for Distributed I/O. The FGEN combines multiple Ethernet protocols—EtherNet/IP™, Modbus™ TCP and PROFINET®—in a
single device, yet only allows one Ethernet master to control the outputs while the input and diagnostic data is available to the other protocols.
The FGEN AIM station offers isolated power for inputs and outputs and several I/O configurations, including 16 inputs and 16 outputs and an eight
input/output station.
“The FGEN AIM station with Multiprotocol Technology features a unique operating system in that it allows more than one Ethernet protocol to
be embedded on the device,” said Chris Vitale, Senior Product Manager, TURCK. “This provides our customers the flexibility of identifying a single
part number, instead of dealing with the complexities of specifying or configuring the station based on the Ethernet host system.”
The FGEN AIM station is available in TURCK’s rugged IP67-, 68- or 69K-rated housing for reliable operation in harsh environments.
Product Specifications
• IP67, IP68, or IP69K rated housing
• All inputs support PNP sensors and dry contacts
• Offers isolated power for inputs and outputs for several I/O configurations, including 16 inputs and 16 outputs and an eight input/output station
• All outputs are 2 amps
• Available for either 4-pin or 5-pin auxiliary power connectors
TURCK website now has 3D drawings of many of their sensors available for download
www.turck-usa.com
Then use the search tool to find your specific sensor and drawings
www.mtechmn.com
Page 3
2012 Issue 7
Monthly Mtech Enews
Product News
www.bannerengineering.com
High-Power Linear Back Lights for Vision Systems
These new lights have been developed for backlighting narrow areas that can vary in length such as web processing applications.
The extremely diffused light can also be used in area lighting applications eliminating issues related to hot spots.
Features
• Four high-intensity, visible wavelengths, plus IR
• Available in six different lengths:
- 145mm (5.7 in) - 290 mm (11.4 in) - 435 mm (17.7 in) - 580 mm (22.8 in) - 870 mm (34.2 in) - 1160 mm (45.6 in)
• High-power, solid-state LED array; continuous or strobed operation is selectable via sensor software (P4 models) or via hookup
• Optically isolated strobe signal
• Selectable Active High or Active Low strobe option
• Maintenance-free, rugged construction
• Very even light pattern
• Can also be used as a highly diffused area light
• Diffused backlight for any Vision System.
See www.bannerengineering.com for a complete vision lighting tutorial
Illuminated-base Flush Mount Emergency Stop Buttons
Electro-Mechanical E-Stop Push Buttons in IP65 Enclosure
These new Flush Mount E-Stop buttons are ideal for various emergency stop safety applications. The easy-to-install E-Stops are available
with two color: yellow (or green) and red lighting, or one color: red lighting only for bright and highly visible status indi cation. The EZLIGHT® logic provides an illuminated (e.g. yellow) base when the button is armed and the machine is in RUN mode, and turns to a
flashing (or solid) red whenever the button is pushed. The base of an armed button can also turn to a steady red (from yellow or
green) when a STOP condition exists by applying an external signal. The E-Stops are available with standard 40 mm actuator or a 44
mm lockable actuator. The lockable style actuator can provide supervisory or personal control and is intended to prevent unauthorized
or accidental resetting of a pushed button by applying a padlock once the button is actuated. It is important to note that the lockable
models are not to be used as an energy isolating device or as the sole means of complying with Lockout/Tagout.
Features
Push-to-stop, twist-to-release (both styles) or pull-to-release (standard actuator) operation per IEC60947-5-5. Latching design complies with
ISO 13850; direct (positive) opening operation per IEC 60947-5-1.
• Safe Break Action ensures NC contacts will open if the contact block is separated from the actuator
• Multiple buttons can be interfaced and series connected with CSS Series Hookup Cordsets
• Compliant with ANSI B11.19, ANSI NFPA79, and IEC/EN 60204-1 Emergency Stop requirements
Models with EZ-LIGHT® logic indication with yellow or green and red (flash or solid) indication of actuation (armed or depressed/latched button) and machine status (solid red - optional) allows for easy identification of the status or the E-Stop button. 8-pin M12/Euro-style Quick Disconnect with 2NC and a PNP NO auxiliary output, and 5-pin QD models with 2NC designed to interface with Safety BUS nodes/gateways.
• Easy installation with no assembly, individual wiring or additional enclosure required
• Reduces intensive labor costs with a fully enclosed E-Stop button ready for installation
Rugged design rated to IP65. “Emergency Stop” legend label included.
R-GAGE QT50R-AFH Sensor
Banner has released their new Adjustable-Field, High-Sensitivity, Radar-Based Sensors for Detecting Moving and Stationary Targets.
The R-GAGE sensor emits a well-defined beam of high-frequency radio waves from an internal antenna. Some of this emitted energy
reflects back to the receiving antenna. Signal processing electronics in the sensor determine the distance from the sensor to the object
based on the time delay of the return signal. The sensor can be configured (via DIP switches) to sense objects up to a specific distance,
ignoring objects beyond this distance (also called background suppression).
This sensor provides a version of the R-GAGE that is well suited for car parking and other vehicle detection applications. Cars have
proven to be difficult targets to detect for any technology. They present multiple angles and distances of reflection, curved mirrored
surfaces, various combinations of plastic and metal composition, and tend to be driven and parked outside of designated areas. The Fourth
Generation R-GAGE has shown itself to be better than other technologies at tackling these difficult detection applications.
Features
• Fourth Generation FMCW – Frequency Modulated Continuous Wave (true-presence) radar detects moving and stationary objects
• Higher sensitivity and longer range than previous FMCW radar
• Longer delay options for improved stability of stationary vehicles
• Wide beam pattern • Adjustable sensing field – ignores objects beyond setpoint
• Robust to extreme weather conditions
• Resilience to high shock and vibration conditions
• Easy setup and configuration of range, sensitivity and output with simple DIP switches
• Sensing functions are unaffected by wind, falling rain or snow, fog, humidity, air temperatures, or light
• Sensor operates in Industrial, Scientific, and Medical (ISM) telecommunication band; no special license required
• Rugged IP67 housing withstands harsh environments
• Protected by U.S. Patents
www.mtechmn.com
Page 4
2012 Issue 7
Monthly Mtech Enews
Product News
www.bannerengineering.com
R-GAGE QT50R-AF2W Sensor
Adjustable-Field, Dual-Zone, Waveguide Sensors for Detecting Moving and Stationary Targets
Banner has released their new Adjustable-Field, High-Sensitivity, Radar-Based Sensors for Detecting Moving and Stationary Targets.
The R-GAGE sensor emits a well-defined beam of high-frequency radio waves from an internal antenna. Some of this
emitted energy is reflected back to the receiving antenna. Signal processing electronics determine the distance from
the sensor to the object based on the time delay of the return signal. The sensor can be configured to two independent sensing zones.
The two sensing zones are factory pre-set to default distances; they can be reconfigured for different distances using
the DIP switches on the back of the sensor. The sensor is plug-in ready for immediate operation. The sensitivity was
pre-calibrated at the factory, assuming that the sensing field will be clear of obstacles.
The sensitivity can be adjusted using the DIP switches on the back of the sensor.
This sensor provide a solution to port crane anti-collision applications. For the past five years Banner has worked with
large OEM crane manufacturers around the world to design a sensor that meets their challenging needs. We are now
presenting this advanced technology as a standard product offering. The QT50R-AF2W sensor is a lower cost alternative to the Q120RA model, providing approximately half the sensitivity and range.
Features
• Fourth Generation FMCW – Frequency Modulated Continuous Wave (true-presence) radar detects moving and stationary objects
• Narrow beam pattern
• Two independent, adjustable sensing zones
• Robust to extreme weather conditions
• Resilience to high shock and vibration conditions
• Easy setup and configuration of range, sensitivity and output with simple DIP switches
• Sensing functions are unaffected by wind, falling rain or snow, fog, humidity, air temperatures, or light
• Sensor operates in Industrial, Scientific, and Medical (ISM) telecommunication band; no special license required
• Rugged IP67 housing withstands harsh environments
• Protected by U.S. Patents
EZ-LIGHT® K50 Beacon
Daylight-Visible, General-purpose Indicators for Indoor or Outdoor Use
Now Available 230Vac Model Beacons with Perimeter and Center LEDs & 12 to 30Vdc models with White LEDs
This indicator was developed for areas where high brightness is needed with viewing from all directions. They are intended for indoor and outdoor for general
status indication including areas with high levels of ambient light that would normally wash out a standard indicator light.
Features
• Intense levels of light output for outdoor applications
• Perimeter and top view models available
• Rugged, sealed thermoplastic housing rated for IP67 and IP69K
• Cabled and quick-disconnect models available
• 12 to 30V dc, 85 -130V ac, or 100 – 250V ac operation, depending on model
• 12V dc allows for use in just about any battery powered mobile application
WLS28 Work Light Strip
Now Available with 25 Degree Lensed Window
The WLS28 lensed models were developed to concentrate the light onto a targeted work surface. Compared to standard models, the lensed versions will approximately double the Lux
levels on a surface at one meter away from the light. The lens also minimizes direct viewing of the intense LEDs making it more comfortable for personnel in the
area.
Features
• High power solid state LED array
• Designed for enclosure or area lighting
• Rugged aluminum housing rated for IP50 or IP67
• Lighted lengths available from 145mm to 1130 mm • 12 to 30V dc operation
• Low power consumption; less than 9 watts per foot
• Cabled and Quick Disconnect models available
• ON/OFF switch and non-switch models available
• Stand alone and cascadable models available
• Low profile design with included swivel mounting brackets
• Narrow 28mm total width
• Brackets are made of zinc plated 14 gage steel and allow pivoting of light 45⁰ in either direction
• Illuminates a large area with an even pattern of light and no shadows
www.mtechmn.com
Product News
www.exlar.com
K Series Universal Linear Actuator - Now Available in New 90 mm Frame Size
Exlar now offers a 90 mm frame size in the expanding K Series line of universal actuators. This successful family of actuators offers Exlar's roller screw technology with flexibility in mounting options and motor types and provides an excellent
replacement for pneumatic and hydraulic cylinders in linear motion applications. As with the existing 60 mm frame, this
actuator offers two grades of planetary roller screws and also an Acme screw to give you even more flexibility in selecting
the right solution to match your customers' requirements.
Features:
• Three Performance Grade
KX - high performance planetary roller screw
KM - planetary roller screw
KA - Acme screw
• Proven Exlar roller screw technology
• Flexible mounting options
• Adaptable to various motor types
• Three motor/actuator reduction ratios for matching motor with performance requirements
Educational Video
www.pulspower.us
Learn more about the importance and cost savings of the efficiency rating when selecting a power supply
This video discussed the importance of efficiency when
selecting your power supply
Efficiency is simply the Power in to Power out ratio
Lost efficiency generates heat
Heat decreases electronics components life
Click on the PULS on Power Show image
to view the entire 4:14 minute video
Watch for additional educational videos in future Mtech newsletters
2012 Issue 7
Business Tagline or Motto
Mtech Represents
the following fine manufacturers
OUR OBJECTIVE
Mtech is a manufacturer's representative
dedicated to providing O.E.M.'s and users with
solutions to their factory automation
applications. This objective is accomplished by
integrating over 70 combined years of experience
with state of the art products
to fill our customer requirements.
REGIONS SERVED
TURCK, BANNER, & AMC
Minnesota, Western Wisconsin, North Dakota, &
South Dakota
EXLAR, HORNER & PULS
Minnesota, Western Wisconsin, North Dakota,
South Dakota, Iowa, & Nebraska
www.mtechmn.com
2594 Rice Street
Roseville, MN 55113
Sandy Holmes
651.704.9767
[email protected]
John Braatz
612.382.0815
[email protected]
Jay Silverberg
612.386.8864
[email protected]
Eric Lavigne
612.382.0819
[email protected]
Brian Bendel
952.484.9508
[email protected]
Mark Ingalls
612.998.6449
[email protected]
Tom Filipek
612.840.6653
[email protected]
Brian Freecheck
612.889.0008
[email protected]