JABRA stone3

jab
ra
JABRA stone 3
User Manual
jabra.com/stone3
Contents
1.welcome........................................... 3
2. headset OVERVIEW.......................... 4
3. how to wear................................... 5
3.1 Change eargels
4. how to charge the battery........ 6
4.1 battery status
5. how to connect............................. 8
5.1 turning on/off the headset
5.2 CONNECT with a bluetooth device
(FIRST TIME PAIRING)
5.3 CONNECT with a bluetooth device
(SECOND TIME PAIRING OR RE-PAIRING)
5.4 CONNECT with an nfc-enabled DEVICE
6. how to use .................................... 11
6.1 Multiple call handling
6.2 list of VOICE COMMANDS
6.3 list of voice guidance
7.update firmware..........................14
8.SUPPORT...........................................15
8.1faq
8.2How to care for your headset
9.Technical specifications............17
2
1. welcome
Thank you for using the Jabra Stone3. We hope you
will enjoy it!
Jabra STONE3 features
ƒƒ NFC technology
ƒƒ Volume touch controls
ƒƒ Voice controls
ƒƒ HD Voice
ƒƒ Wireless freedom - Up to 10m/33ft
ƒƒ Noise Blackout™ 3.0
3
2. headset OVERVIEW
Earhook
Answer/End
Microphone
Battery
indicator
bra
ja
Touch volume
control panel
Bluetooth
indicator
EargelTM
Light
indicator
NFC zone
Extra EargelTM
N
Battery
display
FC
Charging
socket
AC charger
USB cable
NOTE: All accessories are also available on jabra.com.
4
3. how to wear
a
j
ra
b
Wear the Jabra Stone3 on the right ear and enjoy
the comfort.
3.1 Change eargels
Choose between four ergo-designed eargels for
optimal fit and comfort.
a
br
ja
a
br
ja
5
4. how to charge the
battery
jabr
a
jabr
a
jabra
Place the headset in the charger and connect
either the AC power or USB cable to charge both
the charger and the headset.
6
4.1 battery status
Headset battery status
talk time
20 min - 2 hours
Less than 20 min talk
time
charger battery status
talk time
More than 5.5 hours
2.5 -5.5 hours
Less than 2.5 hours
It takes approx. 3 hours to fully charge the headset
and the charger.
7
5. how to connect
5.1 turning on/off the headset
ON: Push the headset out of the charger by
pressing on the backside.
OFF: Insert the headset into the charger.
5.2CONNECT with a bluetooth device
(FIRST TIME PAIRING)
1.Take the headset out of the charger. The
headset will automatically start up in pairing
mode.
2.Follow the voice-guided pairing instructions to
pair to your Bluetooth device.
8
5.3CONNECT with a bluetooth device
(SECOND TIME PAIRING OR RE-PAIRING)
1.Take the headset out of the charger and turn off
the headset.
2.Wear the headset and press and hold (5 secs)
the Answer/end button until you hear the
pairing instructions.
3.Follow the voice-guided pairing instructions to
pair to your Bluetooth device.
ja
bra
9
5.4CONNECT with an nfc-enabled
DEVICE
1.Ensure that NFC is enabled on your mobile
device.
2.Take the headset out of the charger and turn off
the headset.
3.Wear the headset, and press and hold (5 secs)
the Answer/end button until you hear the
pairing instructions.
4.Hold the NFC device against the NFC zone of the
charger (not the headset). Confirm the
connection on your mobile device.
N
FC
NFC zone
Note: NFC devices have NFC implemented in different ways. The
size and sensitivity of the NFC zone and how to connect the
headset may vary between devices.
10
6. how to use
Earhook
Answer/End
Microphone
Battery
indicator
bra
ja
Touch volume
control panel
Bluetooth
indicator
EargelTM
Light
indicator
NFC zone
FC
Charging
socket
N
Battery
display
action
Answer call
Tap or press the Answer/end
button
End call
Tap the Answer/end button
Reject call
Double-tap the
Answer/end button
Redial last
number
Double-tap the Answer/end
button when not on a call
Adjust
speaker
volume
Slide a finger up/down the
Volume panel
ra
b
a
j
function
j
ra
b
a
ra
b
a
j
11
The headset can accept and handle multiple calls
simultaneously.
a
j
ra
b
action
End current call and
answer incoming call
Tap the Answer/end
button
Switch between held call
and active call
Press and hold
(2 secs) the
Answer/end button
Put current call on hold
and answer incoming call
Press and hold
(2 secs) the
Answer/end button
Reject incoming call
Double-tap the
Answer/end button
ra
b
a
j
function
6.2list of VOICE COMMANDS
What you can say
what it means
Answer
Answer incoming call
Ignore
Reject incoming call
12
6.3list of voice guidance
click to listen
What you hear
Power on
Power off
Welcome. You are now ready for pairing.
Go to the Bluetooth menu on your
phone...
Pairing failed
Connected
Disconnected
Low battery
Call from...
Battery level is low
Battery level is medium
Battery level is high
13
7. update firmware
Firmware updates improve performance or add
new functionality to Jabra devices.
How to update the firmware
1.Download the latest firmware to your PC from
the www.jabra.com/stone3 support page.
2.Take the headset out of the charger, and turn off
the headset.
3.Connect the charger to your PC using the
supplied micro-USB cable.
4.Press and hold (10 secs) the Answer/end button
on the headset until the Bluetooth indicator
turns yellow, and then release the button.
5.Insert the headset into the charger.
6.Run the firmware updater on your PC, and follow
the instructions to update your headset.
14
8. SUPPORT
8.1faq
View the comprehensive FAQ on Jabra.com/stone3.
Q Why do I hear crackling noises?
A Bluetooth is a radio technology that is sensitive to
objects between the headset and the connected
device. Ensure the headset and the connected device
are within range (up to 10 meters or 33 feet).
Q What is the range of the headset?
A The Jabra Stone3 supports the following maximum
ranges: 10m/33ft.
Q Why do I not hear anything?
A You might need to increase the speaker volume, or
ensure that the headset is connected to a device.
QI am having Bluetooth connection problems
A Check your mobile device’s Bluetooth menu and
delete/forget the headset. Re-connect the headset to
your Bluetooth device following the Bluetooth
connection instructions.
15
8.2How to care for your headset
ƒƒ Always store the headset with the power off
and safely protected.
ƒƒ Avoid storage at extreme temperatures (above
45°C/113°F or below -20°C/-4°F). This can
shorten battery life and may affect headset
operation.
ƒƒ Do not expose the headset to rain or other
liquids.
16
9. Technical
specifications
Jabra stone3 headset
specification
Weight:
33g (incl charger)
Dimensions:
H 58 mm x W 50.7 mm x D
24.7mm
Microphones:
2 omni-directional
microphones
Speaker:
10mm dynamic speaker
Operating range:
10 m (33 ft)
Bluetooth version:
3.0
Paired devices:
Up to 8, two connected at the
same time (MultiUse™)
Supported Bluetooth
profiles:
A2DP, Hands Free Profile (v1.6),
Headset profile (v1.2), PBAP
Talk time:
Up to 10 hours
Standby time:
Up to 15 days
Operating temperature:
-10°C to 60°C (14°F to 140°F)
Storage temperature:
-20°C to 45°C (-4°F to 113°F)
Pairing passkey or PIN:
0000
17
© 2013 GN Netcom A/S (North America: GN Netcom US, Inc.). All rights
reserved. Jabra® is a registered trademark of GN Netcom A/S. All other
trademarks included herein are the property of their respective owners.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by GN Netcom A/S is under license. (Design
and specifications subject to change without notice).
Rev a
Made in China
model: bte2
www.jabra.com
18