Xenon Searchlights - Jastram Technologies Ltd.

 Xenon Searchlights
500 Kilowatt
These Searchlights are designed for heavy duty marine service on oceangoing vessels
45 Million Candlepower
Manual Control
Features
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Drum size nominal 15 inch (381mm)
45 million beam candlepower
Nominal 1 degree beam spread collimation
Remote electric beam size focus (1 to 15 degrees)
External manual beam size focus knob (provides backup if focus
motor fails)
Precision electroformed deep-dish reflector made of bullet
resistant nickel with polished rhodium finish
Rugged marine aluminum and stainless steel construction with
scratch resistant powder coat finish
Optional brass construction with sparkling chrome finish for
Yachts
Voltages: 1-phase 115 VAC (option 2:1 transformer for 230vac 1
phase)
Aiming: remote lever-gear or local handle
Searchlight door and power supply safety interlock switches
Long-Life warranted Xenon Lamp
Sealed weatherproof drum
Exceeds 385 degree horizontal rotation
Remote Electrical Control
Features
Note: Remote Electric Control Units have all of the features
Listed above and also the following:
"Proportional-Speed" Joystick provides Aiming and Speed Control
with Single-Hand (Click Here.....New Product "Joystick")
o Motorized Rugged Cast Base with Horizontal and Vertical Clutch
Assemblies and Ball Bearings contained in Stainless Steel Races
o Exceeds 385 Degrees Horizontal Rotation (with unique sliding
stop design)
o Fast Speed Searches at 30 Degrees per Second
o Single station or multiple station control
o Indoor and outdoor weatherproof control stations available
o Optional anti-icing heater circuitry in base, rack, and trunnions
available
o Optional Digital Azimuth Indicator
o Optional Manual Back-up (in case of motor failure)
o
New Proportional Speed Joystick
provides single-hand operator control
Specifications not guaranteed and subject to change without notice
Xenon Searchlights
500 Kilowatt
These Searchlights are designed for heavy duty marine service on oceangoing vessels
Specifications Controls
Searchlight Intensity: The beam of light is produced by a
xenon arc lamp with a colour temperature of 6000 degrees
Kelvin and is rated at 30-million candlepower in this searchlight.
Lamp: Xenon-arc, 1500-hour average life, warranted for 1500
hours. Warranted hourly lamp cost is considerably less than
non-warranted hourly carbon cost and non-warranted hourly
cost of many Incandescent lamps.
Adjustable Beam Size: The horizontally mounted lamp
combined with the deep parabolic metal reflector gives the
capability of changing from the most concentrated intense beam
for long reaches to a larger beam for lighting large areas at
closer range. Beam size can be adjusted manually at the
searchlight or electrically from a remote control station as an
optional feature.
Reflector: Precision, parabolic, constructed virtually
indestrucable nickel with corrosion resistant rhodium finish.
Short focal length deep parabola captures a higher percentage
of total light from the lamp than do most conventional reflectors
thus producing a remarkably intense beam.
Cover Glass: Extremely strong, impact and thermal shock
resistant, heat tempered clear glass.
Starter: Simple, reliable and compact, produces the high
voltage necessary to start the lamp instantly. It is readily
accessible and replaceable as a single unit.
Bases: Standard and pedestal for manual control. Motorized
base for distant electric control (DEC) can be controlled from
one or more remote stations.
Drum: Constructed of marine grade corrosion resistant material
with a hinged front door for easy lamp replacement. Rear dome
is removable for ease in servicing.
Finish: Drum interior with heat resistant flat black paint. Exterior
surfaces are white enamel and mechanical control shafts inside
pilot house are polished brass. The control parts that are
normally polished can be chrome plated (see optional features).
Wiring: Three conductor (one ground) power cable and
multiconductor control cables extend thought watertight stuffing
tubes in drum and are clamped to rotating base. Sufficient
length is supplied to terminate in a junction box (not supplied)
near the searchlight without causing mechanical stress when
searchlight is moved through its entire horizontal and vertical
travel.
Electrical: A power supply to produce the required ballasted
DC for the searchlight, control station, and DEC components
are described on pages 2 and 3. Other DC sources with
appropriate ballasts and controls may also be used – especially
cost efficient when replacing or converting existing carbon arc
searchlights. Consult the factory
Please refer to page 2 for descriptions of manual control options
listed below (seep page 3 for electric controls).
Local Control: Fig 1 & 2 No pilot house controls, searchlight
has training handle on drum and hand clamps to lock
searchlight in any position.
Lever-Gear Control: Fig 4, 5A and 5B. Operates conviently
with one hand. Horizontal movement controlled by pointing
lever, vertical by twisting lever. Vertical lock conviently located
on control handle. Ceiling lock clamps horizontal movement.
Wheel Control: Fig 6. Upper wheel controls horizontal
movements, lower wheel vertical movements. Friction brake
holds searchlight in any vertical position.
Distant Electric Control (DEC): Fig 3. Motors in searchlight
base control horizontal and vertical beam movements so that
searchlight can be located any distance from pilothouse.
Dynamic braking stops movement instantly upon controller
release. Page 3 shows controllers and control stations for both
single-station and multiple-station systems. These components
priced separately.
Distant mechanical Control (DMC): Fig 7A and 7B. Similar to
lever gear or wheel except that control shafts are at right angles
to searchlight base.
Optional Features
Searchlights can be tailored to your exact needs by specifying
these features at time of order for an additional charge.
Special Control Length, longer or shorter than standard.
Specify length from bottom of base (vertical centerline of base if
DMC) to centerline of lever handle or larger wheel.
Special pedestal height, higher or lower than standard.
Specify height from bottom of base to centerline of beam.
Brass Base & Yoke instead of marine aluminum. Add ”–B” to
the end of the searchlight catalogue number.
Remote Focus, Add “-RF” to searchlight catalogue number.
Chromium Plated Pilot house Controls, Add “-CC” to the end
of the searchlight catalogue number.
Anit-icing Heaters, are spplied on DEC searchlights only. Add
“-H” to the end of the catalogue number.
See “how to order” on page 4
Searchlight Selection Table Control Type
Base Style
Base drawing
** Part No.
** Net Wt Kg ** Shipping Wt Kg
Standard
Fig.1
CF-X4197
29
41
Pedestal
Fig.2
CF-X4790
36
48
Standard
Fig.1
CF-X9396-LG
36
48
Lever-Gear
Fig. 4, 5A & 5B
Pedestal
Fig.2
CF-X4785LG
43
57
Standard
Fig.1
CF-X9396W
36
48
Wheel
Fig. 6
Pedestal
Fig.2
CF-X4785W
43
57
Lever-Gear
DM
Fig.7B
CF-X9397LG
45
59
Distant Mechanical
Wheel
DM
Fig.7A
CF-X9397W
45
59
Distant Electric
DE
Fig.3
CF-X9398
59
91
** This data is for the searchlight only. Does not include power supply or control accessories.
Local Control
Specifications not guaranteed and subject to change without notice
Xenon Searchlights
500 Kilowatt
These Searchlights are designed for heavy duty marine service on oceangoing vessels
Dimensional Drawings Inch (mm)
Specifications not guaranteed and subject to change without notice
Xenon Searchlights
500 Kilowatt
These Searchlights are designed for heavy duty marine service on oceangoing vessels
Control Components
Control Station
Optional enclosure for Control Stations
CF-4441x (without remote focus)
CF-4441x-RF (with remote focus)
For manual control searchlights.
Conatins searchlight off-start
switch, standby switch, and
remote focus switch (if specified).
Mounted on bright stainless steel
plate 3.12 x 5.62 in. (79 x 143
mm) Depth clearance 2.5 in. (64
mm)
Net Weight 1.00 lb (0.40 kg)
P/N
Used
for
CF5079A
CF5288
CF9824
CF441X
CFC5388
CF4799X
Dimensions inch (mm)
A
B
C
3.25
5.75
2.75
(83)
(146)
(70)
6.00
8.00
3.50
(152)
(203)
(89)
6.00
6.00
4.00
(152)
(152)
(102)
8672X (without speed control)
8672XS (with speed control)
Used when DEC searchlights are
controlled from more than one remote
location. Only one required per
searchlight regardless of quantity of
4799X type control stations used. Steel
oiltight enclosure contains rectifier, relays,
fuses, etc. in addition 8672s contains
beam speed control devices with external
adjustment to preset the slow speed.
Enclosure size 12x10x5 (305x254x127
mm)
Net weight 19.4 lb (8.80kg)
Two Types: 1] when searchlight is controlled form one location only and 2] when
searchlight is controlled from more than one location. In each the basic station is a
compact unit incorporating OFF-ON Switch, UP-DOWN-LEFT-RIGHT joystick controller,
and STANDBY-OFF switch. Operator can change searchlight aim with beam off when
switch in “STANDBY” position.
Optional controls are: 1] Remote Focus to change the beam size and 2] Speed Control
to change speed of beam travel. Remote focus requires searchlight also to be equipped
with remote focus option. Speed control requires no additional feature in searchlight. Part No.
Table I Single Station Controls
Options
Dimensions Depth
Single Station
Control
CF-C5388
Table II Multiple Station Controls
Weight
Inch (mm)
Options
Dimensions
Depth
Weight
Inch (mm)
Rmte Speed
Inch
Lb.
A
B
Focus Control
(mm)
(kg)
No
No 6 (152) 8 (203) 3.5 (89) 4.8 (2.18)
CF-C5388-RF Yes
CF-C5388RFS
Yes
Part No.
No
6 (152) 8 (203) 3.5 (89) 4.8 (2.18)
Yes
6 (152) 8 (203) 3.5 (89) 4.8 (2.18)
Multiple Compatible
Control
Control Rmte. Spd.
Inch
Lb
A
B
Station
Assembly Focus Cntl
(mm)
(kg)
CF-4799X CF-8627X No
No 6 (152) 6 (152) 3.12 (79) 2.5 (1.14)
CFCF4799-RF
8627X
Yes
No 6 (152) 6 (152) 3.12 (79) 2.5 (1.14)
CFCF4799-RFS
8627XS
Yes
Yes 6 (152) 6 (152) 3.12 (79) 5.0 (2.27)
How to Order Searchlight Systems
A minimum of three components must be specified to order a complete searchlight system: 1] a searchlight from the table on page
1 (including suffix for optional features), 2] power supply described on page 2 and at least one operator’s control station from
those described on page 3. Distant Electric Control searchlights to be controlled from more than one remote location also require
one 6872X type control assembly (described on page 3) to consolidate signals from the multiple control stations.
Example of manual control searchlight order:
2 CF-X9396LG-CCRF, 500w xenon searchlight, standard base, with remote focus and chrome plated lever gear controls 46
inches longer than standard, arranged per dimension Fig 5A complete with 5589 stem and SL3000 bearing.
2 CF-4198PS, 500w xenon searchlight power supply.
2 CF-4441X-RF, control station with remote focus.
Example or order for DEC system:
2 CF-X9398-HRF 500w xenon searchlight, DEC, with anti-ice heaters and remote focus.
2 CF-4198PS, 500w xenon searchlight power supply
2 CF-8672XS, control assembly with speed control
4 CF-4799X-RFS, Control station for multiple control stations for DEC Searchlight with remote focus and speed control.
Specifications not guaranteed and subject to change without notice
Xenon Searchlights
500 Kilowatt
These Searchlights are designed for heavy duty marine service on oceangoing vessels
Parts
Description
Part No.
Description
Part No.
Description
Part No.
Capacitor starter
Capacitor power
Capacitor power
CF-2896
CF-4404X
CF-4405
Cover Glass
Fan
Gasket std & ped base
CF-SL1085
CF-4434X
CF-SL3356
Lamp
Reflector
Starter Assembly
CF-1000TRC
CF-9719X
CF-4636X
Specifications not guaranteed and subject to change without notice