nr normy ASTM A1-00(2005) ASTM A2-02 ASTM A3

Transcription

Normy ASTM (American Society for Testing and Materials) dostępne w BG AGH - kolekcja ASTM Standards Book 2006 (stan na dzień 29.02.2012)
ASTM Standards (American Society for Testing and Materials) available at AGH Main Library – ASTM Standards Book 2006 (as for: 29.02.2012)
nr normy
tytuł
volumin
Steel - Structural, Reinforcing, Pressure Vessel,
Railway
ASTM A1-00(2005)
Standard Specification for Carbon Steel Tee Rails
volume 01.04
ASTM A2-02
Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
volume 01.04
Railway
ASTM A3-01
Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
volume 01.04
Railway
ASTM A6/A6M-05a
Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and
Sheet Piling
volume 01.04
Railway
ASTM A20/A20M-05
Standard Specification for General Requirements for Steel Plates for Pressure Vessels
volume 01.04
Railway
ASTM A29/A29M-05
Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
volume 01.05
Steel - Bars, Forgings, Bearing, Chain, Springs
ASTM A31-04
Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
volume 01.08
Fasteners; Rolling Element Bearings
ASTM A34/A34M-01
Standard Practice for Sampling and Procurement Testing of Magnetic Materials
volume 03.04
Magnetic Properties
ASTM A36/A36M-05
Standard Specification for Carbon Structural Steel
volume 01.04
Railway
ASTM A47/A47M-99(2004)
Standard Specification for Ferritic Malleable Iron Castings
volume 01.02
Ferrous Castings; Ferroalloys
ASTM A48/A48M-03
Standard Specification for Gray Iron Castings
volume 01.02
ASTM A49-01
Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged
Carbon Steel Compromise Joint Bars
volume 01.04
Railway
ASTM A53/A53M-05
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
volume 01.01
Steel - Piping, Tubing, Fittings
ASTM A65-01
Standard Specification for Steel Track Spikes
volume 01.04
Railway
ASTM A66-01
Standard Specification for Steel Screw Spikes
volume 01.04
Railway
ASTM A67-00(2005)
Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
volume 01.04
Railway
ASTM A74-05
Standard Specification for Cast Iron Soil Pipe and Fittings
volume 01.02
ASTM A82/A82M-05a
Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
volume 01.04
Railway
ASTM A90/A90M-01
Standard Test Method for Weight a of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
volume 01.06
Coated Steel Products
ASTM A99-03
Standard Specification for Ferromanganese
volume 01.02
ASTM A100-04
Standard Specification for Ferrosilicon
volume 01.02
ASTM A101-04
Standard Specification for Ferrochromium
volume 01.02
ASTM A102-04
Standard Specification for Ferrovanadium
volume 01.02
ASTM A105/A105M-05
Standard Specification for Carbon Steel Forgings for Piping Applications
volume 01.01
ASTM A106/A106M-04b
Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
volume 01.01
ASTM A108-03e1
Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
volume 01.05
ASTM A109/A109M-03
Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
volume 01.03
Steel - Plate, Sheet, Strip, Wire; Stainless Steel
Bar
ASTM A111-99a(2004)e1
Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire
volume 01.06
ASTM A116-05
Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
volume 01.06
ASTM A121-99(2004)
Standard Specification for Mettalic-Coated Carbon Steel Barbed Wire
volume 01.06
ASTM A123/A123M-02
Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
volume 01.06
ASTM A125-96(2001)
Standard Specification for Steel Springs, Helical, Heat-Treated
volume 01.05
ASTM A126-04
Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
volume 01.02
ASTM A128/A128M-93(2003)
Standard Specification for Steel Castings, Austenitic Manganese
volume 01.02
ASTM A131/A131M-04ae1
Standard Specification for Structural Steel for Ships
volume 01.04
Railway
ASTM A132-04
Standard Specification for Ferromolybdenum
volume 01.02
ASTM A134-96(2005)
Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
volume 01.01
ASTM A135-05
Standard Specification for Electric-Resistance-Welded Steel Pipe
volume 01.01
ASTM A139/A139M-04
Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
volume 01.01
ASTM A143/A143M-03
Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products
and Procedure for Detecting Embrittlement
volume 01.06
ASTM A144-04
Specification for Ferrotungsten
volume 01.02
ASTM A146-04
Standard Specification for Molybdenum Oxide Products
volume 01.02
ASTM A148/A148M-05
Standard Specification for Steel Castings, High Strength, for Structural Purposes
volume 01.02
ASTM A153/A153M-05
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
volume 01.06
ASTM A159-83(2001)
Standard Specification for Automotive Gray Iron Castings
volume 01.02
Strona 1
ASTM A167-99(2004)
Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
volume 01.03
Bar
ASTM A176-99(2004)
Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
volume 01.03
Bar
ASTM A178/A178M-02
Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler
and Superheater Tubes
volume 01.01
ASTM A179/A179M-90a(2005) Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
volume 01.01
ASTM A181/A181M-01
Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
volume 01.01
ASTM A182/A182M-05a
Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts
for High-Temperature Service
volume 01.01
ASTM A183-03
Standard Specification for Carbon Steel Track Bolts and Nuts
volume 01.04
Railway
ASTM A184/A184M-05
Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement
volume 01.04
Railway
ASTM A185/A185M-05a
Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
volume 01.04
Railway
ASTM A192/A192M-02
Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
volume 01.01
ASTM A193/A193M-05
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
volume 01.01
ASTM A194/A194M-05b
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature
Service, or Both
volume 01.01
ASTM A197/A197M-00
Standard Specification for Cupola Malleable Iron
volume 01.02
ASTM A203/A203M-97(2003)
Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
volume 01.04
Railway
ASTM A204/A204M-03
Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
volume 01.04
Railway
ASTM A209/A209M-03
Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
volume 01.01
ASTM A210/A210M-02
Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
volume 01.01
ASTM A213/A213M-05c
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and HeatExchanger Tubes
volume 01.01
ASTM A214/A214M-96(2005)
Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
volume 01.01
ASTM A216/A216M-04
Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature
Service
volume 01.02
ASTM A217/A217M-04
Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts,
Suitable for High-Temperature Service
volume 01.02
ASTM A220/A220M-99(2004)
Standard Specification for Pearlitic Malleable Iron
volume 01.02
ASTM A225/A225M-03
Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
volume 01.04
Railway
ASTM A227/A227M-99(2005)
Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
volume 01.03
Bar
ASTM A228/A228M-02
Standard Specification for Steel Wire, Music Spring Quality
volume 01.03
Bar
ASTM A229/A229M-99(2005)
Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs
volume 01.03
Bar
ASTM A230/A230M-05
Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
volume 01.03
Bar
ASTM A231/A231M-04
Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
volume 01.03
Bar
ASTM A232/A232M-05
Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
volume 01.03
Bar
ASTM A234/A234M-05a
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High
Temperature Service
volume 01.01
ASTM A239-95(2004)
Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
volume 01.06
ASTM A240/A240M-05a
Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for
Pressure Vessels and for General Applications
volume 01.03
Bar
ASTM A242/A242M-04e1
Standard Specification for High-Strength Low-Alloy Structural Steel
volume 01.04
Railway
ASTM A247-67(1998)
Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
volume 01.02
ASTM A249/A249M-04a
Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser
Tubes
volume 01.01
ASTM A250/A250M-05
Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
volume 01.01
ASTM A252-98(2002)
Standard Specification for Welded and Seamless Steel Pipe Piles
volume 01.01
ASTM A254-97(2002)
Standard Specification for Copper-Brazed Steel Tubing
volume 01.01
ASTM A255-02
Standard Test Method for Determining Hardenability of Steel
volume 01.05
ASTM A262-02ae3
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
volume 01.03
Bar
ASTM A263-03
Standard Specification for Stainless Chromium Steel-Clad Plate
volume 01.04
Railway
ASTM A264-03
Specification for Stainless Chromium-Nickel Steel-Clad Plate
volume 01.04
Railway
ASTM A265-03
Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
volume 01.04
Railway
ASTM A266/A266M-03a
Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
volume 01.05
ASTM A268/A268M-05a
Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General
Service
volume 01.01
ASTM A269-04
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
volume 01.01
ASTM A27/A27M-05
Standard Specification for Steel Castings, Carbon, for General Application
volume 01.02
ASTM A270-03a
Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
volume 01.01
ASTM A275/A275M-98(2003)
Standard Test Method for Magnetic Particle Examination of Steel Forgings
volume 01.05
ASTM A276-05a
Standard Specification for Stainless Steel Bars and Shapes
volume 01.03
Bar
Strona 2
ASTM A278/A278M-01
Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F
(350°C)
volume 01.02
ASTM A283/A283M-03
Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
volume 01.04
Railway
ASTM A285/A285M-03
Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
volume 01.04
Railway
ASTM A288-91(2003)
Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine
Generators
volume 01.05
ASTM A289/A289M-97(2003)
Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
volume 01.05
ASTM A290/A290M-05
Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
volume 01.05
ASTM A291/A291M-05
Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction
Gears
volume 01.05
ASTM A295/A295M-05
Standard Specification for High-Carbon Anti-Friction Bearing Steel
volume 01.05
ASTM A297/A297M-97(2003)
Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for
General Application
volume 01.02
ASTM A299/A299M-04
Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
volume 01.04
Railway
ASTM A302/A302M-03
Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and ManganeseMolybdenum-Nickel
volume 01.04
Railway
ASTM A304-05e2
Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
volume 01.05
ASTM A307-04
Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
volume 01.08
ASTM A308/A308M-03
Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
volume 01.06
ASTM A309-01
Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
volume 01.06
ASTM A311/A311M-04
Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property
Requirements
volume 01.05
ASTM A312/A312M-05a
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
volume 01.01
ASTM A313/A313M-03
Standard Specification for Stainless Steel Spring Wire
volume 01.03
Bar
ASTM A314-97(2002)
Standard Specification for Stainless Steel Billets and Bars for Forging
volume 01.03
Bar
ASTM A319-71(2001)
Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
volume 01.02
ASTM A320/A320M-05a
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
volume 01.01
ASTM A321-90(2001)
Standard Specification for Steel Bars, Carbon, Quenched and Tempered
volume 01.05
ASTM A322-91(2001)e1
Standard Specification for Steel Bars, Alloy, Standard Grades
volume 01.05
ASTM A323-05
Standard Specification for Ferroboron
volume 01.02
ASTM A324-73(2004)
Standard Specification for Ferrotitanium
volume 01.02
ASTM A325-04b
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
volume 01.08
ASTM A325M-05
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
volume 01.08
ASTM A327-91(1997)
Standard Test Methods for Impact Testing of Cast Irons
volume 01.02
ASTM A327M-91(1997)
Standard Test Methods for Impact Testing of Cast Irons (Metric)
volume 01.02
ASTM A328/A328M-05
Standard Specification for Steel Sheet Piling
volume 01.04
Railway
ASTM A333/A333M-05
Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
volume 01.01
ASTM A334/A334M-04a
Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature
Service
volume 01.01
ASTM A335/A335M-05a
Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
volume 01.01
ASTM A336/A336M-05
Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
volume 01.05
ASTM A338-84(2004)
Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and
Other Heavy Duty Service at Temperatures Up to 650°F (345°C)
volume 01.02
ASTM A340-03a
Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
volume 03.04
Magnetic Properties
ASTM A341/A341M-00(2005)
Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the
Ballistic Test Methods
volume 03.04
Magnetic Properties
ASTM A342/A342M-04
Standard Test Methods for Permeability of Feebly Magnetic Materials
volume 03.04
Magnetic Properties
ASTM A343/A343M-03
Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using
Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
volume 03.04
Magnetic Properties
ASTM A345-04
Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications
volume 03.04
Magnetic Properties
ASTM A348/A348M-05
Standard Test Method for Alternating Current Magnetic Properties of Materials Using the WattmeterAmmeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
volume 03.04
Magnetic Properties
ASTM A350/A350M-04a
Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for
Piping Components
volume 01.01
ASTM A351/A351M-05
Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts
volume 01.02
ASTM A352/A352M-03
Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable
for Low-Temperature Service
volume 01.02
ASTM A353/A353M-04
Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and
Tempered
volume 01.04
Railway
ASTM A354-04
Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded
Fasteners
volume 01.08
ASTM A355-89(2000)
Standard Specification for Steel Bars, Alloys, for Nitriding
volume 01.05
ASTM A356/A356M-05
Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam
Turbines
volume 01.02
ASTM A358/A358M-05
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for HighTemperature Service and General Applications
volume 01.01
Strona 3
ASTM A363-03
Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
volume 01.06
ASTM A367-60(2005)
Standard Test Methods of Chill Testing of Cast Iron
volume 01.02
ASTM A368-95a(2004)
Standard Specification for Stainless Steel Wire Strand
volume 01.03
Bar
ASTM A369/A369M-02
Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature
Service
volume 01.01
ASTM A370-05
Standard Test Methods and Definitions for Mechanical Testing of Steel Products
volume 01.01
ASTM A370-05
volume 01.02
ASTM A370-05
volume 01.03
Bar
ASTM A370-05
volume 01.04
Railway
ASTM A370-05
volume 01.05
ASTM A372/A372M-03
Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
volume 01.05
ASTM A376/A376M-04
Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
volume 01.01
ASTM A377-03
Standard Index of Specifications for Ductile-Iron Pressure Pipe
volume 01.02
ASTM A380-99(2005)
Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and
Systems
volume 01.03
Bar
ASTM A381-96(2005)
Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
volume 01.01
ASTM A384/A384M-02
Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel
Assemblies
volume 01.06
ASTM A385-05
Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
volume 01.06
ASTM A387/A387M-05a
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
volume 01.04
Railway
ASTM A388/A388M-05
Standard Practice for Ultrasonic Examination of Heavy Steel Forgings
volume 01.05
ASTM A389/A389M-03
Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts,
Suitable for High-Temperature Service
volume 01.02
ASTM A390-95(2001)
Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight
Line)
volume 01.06
ASTM A391/A391M-01
Standard Specification for Grade 80 Alloy Steel Chain
volume 01.05
ASTM A392-03
Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
volume 01.06
ASTM A394-05
Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
volume 01.08
ASTM A395/A395M-99(2004)
Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated
Temperatures
volume 01.02
ASTM A400-69(2000)
Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
volume 01.05
ASTM A401/A401M-03
Standard Specification for Steel Wire, Chromium-Silicon Alloy
volume 01.03
Bar
ASTM A403/A403M-04
Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
volume 01.01
ASTM A407-93(2004)
Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
volume 01.03
Bar
ASTM A409/A409M-01(2005)
Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature
Service
volume 01.01
ASTM A411-03
Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
volume 01.06
ASTM A413/A413M-01
Standard Specification for Carbon Steel Chain
volume 01.05
ASTM A414/A414M-05
Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
volume 01.03
Bar
ASTM A416/A416M-05
Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
volume 01.04
Railway
ASTM A417-93(2004)
Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type
Upholstery Spring Units
volume 01.03
Bar
ASTM A418/A418M-05
Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
volume 01.05
ASTM A420/A420M-05
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature
Service
volume 01.01
ASTM A421/A421M-05
Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
volume 01.04
Railway
ASTM A423/A423M-95(2004)
Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
volume 01.01
ASTM A424-00
Standard Specification for Steel, Sheet, for Porcelain Enameling
volume 01.03
Bar
ASTM A426/A426M-05
Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
volume 01.01
ASTM A427-02
Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
volume 01.05
ASTM A428/A428M-01
Standard Test Method for Weight a of Coating on Aluminum-Coated Iron or Steel Articles
volume 01.06
ASTM A434-04
Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
volume 01.05
ASTM A435/A435M-90(2001)
Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
volume 01.04
Railway
ASTM A436-84(2001)
Standard Specification for Austenitic Gray Iron Castings
volume 01.02
ASTM A437/A437M-04
Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for HighTemperature Service
volume 01.01
ASTM A439-83(2004)
Standard Specification for Austenitic Ductile Iron Castings
volume 01.02
ASTM A447/A447M-93(2003)
Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature
Service
volume 01.02
ASTM A449-04b
Specification for Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile
Strength, General Use
volume 01.08
ASTM A450/A450M-04a
Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
volume 01.01
Strona 4
ASTM A451/A451M-02
Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
volume 01.01
ASTM A453/A453M-04
Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to
Austenitic Stainless Steels
volume 01.01
ASTM A455/A455M-03
Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
volume 01.04
Railway
ASTM A456/A456M-99(2003)
Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
volume 01.05
ASTM A459-97(2003)
Standard Specification for Zinc-Coated Flat Steel Armoring Tape
volume 01.06
ASTM A460-94(2004)e1
Standard Specification for Copper-Clad Steel Wire Strand
volume 01.06
ASTM A463/A463M-05
Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
volume 01.06
ASTM A466/A466M-01
Standard Specification for Weldless Chain
volume 01.05
ASTM A467/A467M-01
Standard Specification for Machine and Coil Chain
volume 01.05
ASTM A469/A469M-04
Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
volume 01.05
ASTM A470/A470M-05
Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
volume 01.05
ASTM A471-05
Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
volume 01.05
ASTM A472/A472M-05
Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings
volume 01.05
ASTM A473-01
Standard Specification for Stainless Steel Forgings
volume 01.03
Bar
ASTM A474-03
Standard Specification for Aluminum-Coated Steel Wire Strand
volume 01.06
ASTM A475-03
Standard Specification for Zinc-Coated Steel Wire Strand
volume 01.06
ASTM A476/A476M-00
Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
volume 01.02
ASTM A478-97(2002)
Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
volume 01.03
Bar
ASTM A479/A479M-05a
Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
volume 01.03
Bar
ASTM A480/A480M-05
Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate,
Sheet, and Strip
volume 01.03
Bar
ASTM A481-05
Standard Specification for Chromium Metal
volume 01.02
ASTM A482-05
Standard Specification for Ferrochrome-Silicon
volume 01.02
ASTM A483-04
Standard Specification for Silicomanganese
volume 01.02
ASTM A484/A484M-05a
Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
volume 01.03
Bar
ASTM A485-03
Standard Specification for High Hardenability Antifriction Bearing Steel
volume 01.05
ASTM A487/A487M-93(2003)
Standard Specification for Steel Castings Suitable for Pressure Service
volume 01.02
ASTM A488/A488M-04
Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
volume 01.02
ASTM A489-04
Standard Specification for Carbon Steel Lifting Eyes
volume 01.08
ASTM A490-04a
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
volume 01.08
ASTM A490M-04a
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints
[Metric]
volume 01.08
ASTM A491-03
Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
volume 01.06
ASTM A492-95(2004)
Standard Specification for Stainless Steel Rope Wire
volume 01.03
Bar
ASTM A493-95(2004)
Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
volume 01.03
Bar
ASTM A494/A494M-05
Standard Specification for Castings, Nickel and Nickel Alloy
volume 01.02
ASTM A495-94(2000)
Standard Specification for Calcium-Silicon Alloys
volume 01.02
ASTM A496/A496M-05
Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
volume 01.04
Railway
ASTM A497/A497M-05a
Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
volume 01.04
Railway
ASTM A498-04
Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
volume 01.01
ASTM A499-89(2002)
Standard Specification for Steel Bars and Shapes, Carbon Rolled from "T" Rails
volume 01.05
ASTM A500-03a
Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds
and Shapes
volume 01.01
ASTM A501-01(2005)
Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
volume 01.01
ASTM A502-03
Standard Specification for Rivets, Steel, Structural
volume 01.08
A503/A503MASTM
01(2001)e1
Standard Specification for Ultrasonic Examination of Forged Crankshafts
volume 01.05
Standard Specification for Wrought Carbon Steel Wheels
volume 01.05
ASTM A505-00(2005)
Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements
for
volume 01.03
Bar
ASTM A506-05
Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
volume 01.03
Bar
ASTM A507-05
Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
volume 01.03
Bar
ASTM A508/A508M-05b
Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for
Pressure Vessels
volume 01.05
ASTM A510-03
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
volume 01.03
Bar
ASTM A510M-03
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
[Metric]
volume 01.03
Bar
ASTM A511-04
Standard Specification for Seamless Stainless Steel Mechanical Tubing
volume 01.01
Strona 5
ASTM A512-96(2005)
Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
volume 01.01
ASTM A513-00
Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
volume 01.01
ASTM A514/A514M-05
Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for
Welding
volume 01.04
Railway
ASTM A515/A515M-03
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature
Service
volume 01.04
Railway
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature
Service
volume 01.04
Railway
Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
volume 01.04
Railway
ASTM A518/A518M-99(2003)
Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
volume 01.02
ASTM A519-03
Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
volume 01.01
ASTM A521-03
Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
volume 01.05
ASTM A522/A522M-01
Standard Specification for Forged or Rolled 8 and 0 Nickel Alloy Steel Flanges, Fittings, Valves, and Parts
for Low-Temperature Service
volume 01.01
ASTM A523-96(2005)
Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for HighPressure Pipe-Type Cable Circuits
volume 01.01
ASTM A524-96(2005)
Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
volume 01.01
ASTM A529/A529M-05
Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
volume 01.04
Railway
ASTM A530/A530M-04a
Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
volume 01.01
ASTM A531/A531M-91(2001)
Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
volume 01.05
ASTM A532/A532M-93a(2003) Standard Specification for Abrasion-Resistant Cast Irons
volume 01.02
A533/A533MASTM
93(2004)e1
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, ManganeseMolybdenum and Manganese-Molybdenum-Nickel
volume 01.04
Railway
ASTM A534-04
Standard Specification for Carburizing Steels for Anti-Friction Bearings
volume 01.05
ASTM A536-84(2004)
Standard Specification for Ductile Iron Castings
volume 01.02
ASTM A537/A537M-95(2000)
Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
volume 01.04
Railway
ASTM A540/A540M-05
Standard Specification for Alloy-Steel Bolting Materials for Special Applications
volume 01.01
ASTM A541/A541M-05
Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel
Components
volume 01.05
ASTM
A517/A517M93(2004)e1
ASTM
A542/A542M99(2004)e1
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, ChromiumMolybdenum, and Chromium-Molybdenum-Vanadium
volume 01.04
Railway
ASTM
A543/A543M93(2004)e1
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-ChromiumMolybdenum
volume 01.04
Railway
ASTM A550-78(2000)
Standard Specification for Ferrocolumbium
volume 01.02
ASTM A551/A551M-05
Standard Specification for Steel Tires
volume 01.05
ASTM A553/A553M-95(2000)
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent
Nickel
volume 01.04
Railway
ASTM A554-03
Standard Specification for Welded Stainless Steel Mechanical Tubing
volume 01.01
ASTM A555/A555M-05
Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
volume 01.03
Bar
ASTM A556/A556M-96(2005)
Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
volume 01.01
ASTM A560/A560M-05
Standard Specification for Castings, Chromium-Nickel Alloy
volume 01.02
ASTM A561-71(2004)
Standard Practice for Macrotech Testing of Tool Steel Bars
volume 01.05
ASTM A562/A562M-90(2001)
Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused
Metallic Coatings
volume 01.04
Railway
ASTM A563-04a
Standard Specification for Carbon and Alloy Steel Nuts
volume 01.08
ASTM A563M-04
Standard Specification for Carbon and Alloy Steel Nuts [Metric]
volume 01.08
ASTM A564/A564M-04
Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
volume 01.03
Bar
ASTM A565/A565M-05a
Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
volume 01.03
Bar
ASTM A568/A568M-05a
Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and
Cold-Rolled, General Requirements for¹
volume 01.03
Bar
ASTM A571/A571M-01
Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for LowTemperature Service
volume 01.02
ASTM A572/A572M-04
Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
volume 01.04
Railway
ASTM A573/A573M-05
Standard Specification for Structural Carbon Steel Plates of Improved Toughness
volume 01.04
Railway
ASTM A574-04
Standard Specification for Alloy Steel Socket-Head Cap Screws
volume 01.08
ASTM A574M-04
Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
volume 01.08
ASTM A575-96(2002)
Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
volume 01.05
ASTM A576-90b(2000)
Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
volume 01.05
ASTM A577/A577M-90(2001)
Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
volume 01.04
Railway
ASTM A578/A578M-96(2001)
Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special
Applications
volume 01.04
Railway
ASTM A579/A579M-04a
Standard Specification for Superstrength Alloy Steel Forgings
volume 01.05
ASTM A580/A580M-98(2004)
Standard Specification for Stainless Steel Wire
volume 01.03
Bar
Strona 6
ASTM A581/A581M-95b(2004) Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
volume 01.03
Bar
ASTM A582/A582M-05
Standard Specification for Free-Machining Stainless Steel Bars
volume 01.03
Bar
ASTM A586-04a
Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
volume 01.06
ASTM A587-96(2005)
Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
volume 01.01
ASTM A588/A588M-05
Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield
Point to 4-in. a b Thick
volume 01.04
Railway
ASTM A589-96(2001)
Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
volume 01.01
ASTM A592/A592M-04
Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and
Parts for Pressure Vessels
volume 01.05
ASTM A595-04a
Standard Specification for Steel Tubes, Low-Carbon, Tapered for Structural Use
volume 01.01
ASTM A596/A596M-95(2004)
Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and
Ring Specimens
volume 03.04
Magnetic Properties
ASTM A597-87(2004)
Standard Specification for Cast Tool Steel
volume 01.05
ASTM A598/A598M-02
Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
volume 03.04
Magnetic Properties
ASTM A599/A599M-02
Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
volume 01.06
ASTM A600-92a(2004)
Standard Specification for Tool Steel High Speed
volume 01.05
ASTM A601-05
Standard Specification for Electrolytic Manganese Metal
volume 01.02
ASTM A602-94(2004)
Standard Specification for Automotive Malleable Iron Castings
volume 01.02
ASTM A603-98(2003)
Standard Specification for Zinc-Coated Steel Structural Wire Rope
volume 01.06
ASTM A604-93(2003)
Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
volume 01.05
ASTM A606-04
Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with
Improved Atmospheric Corrosion Resistance
volume 01.03
Bar
ASTM A608/A608M-02
Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure
Application at High Temperatures
volume 01.02
ASTM A609/A609M-91(2002)
Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination
Thereof
volume 01.02
ASTM A610-79(2004)
Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
volume 01.02
ASTM A612/A612M-03
Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower
Temperature Service
volume 01.04
Railway
ASTM A615/A615M-05a
Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
volume 01.04
Railway
ASTM A618/A618M-04
Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
volume 01.01
ASTM A623-05
Standard Specification for Tin Mill Products, General Requirements
volume 01.06
ASTM A623M-03
Standard Specification for Tin Mill Products, General Requirements [Metric]
volume 01.06
ASTM A624/A624M-03
Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
volume 01.06
ASTM A625/A625M-03
Standard Specification for Tin Mill Products, Black Plate, Single Reduced
volume 01.06
ASTM A626/A626M-03
Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
volume 01.06
ASTM A627-03
Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional
Facilities
volume 15.08
Sensory Evaluation; Livestock, Meat and
Poultry Evaluation Systems; Vacuum Cleaners;
Security Systems and Equipment; Detention
and Correctional Facilities; Food Service
Equipment; Homeland Security Applications
ASTM A630-03
Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
volume 01.06
ASTM A632-04
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for
General Service
volume 01.01
ASTM A633/A633M-01
Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
volume 01.04
Railway
ASTM A635/A635M-05
Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural,
High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
volume 01.03
Bar
ASTM A636-76(2004)
Standard Specification for Nickel Oxide Sinter
volume 01.02
ASTM A638/A638M-00(2004)
Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock
for High-Temperature Service
volume 01.03
Bar
ASTM A640-97(2002)e1
Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
volume 01.06
ASTM A641/A641M-03
Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
volume 01.06
ASTM A644-05
Standard Terminology Relating to Iron Castings
volume 01.02
ASTM A645/A645M-05
Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
volume 01.04
Railway
ASTM A646/A646M-04
Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace
Forgings
volume 01.05
ASTM A648-04a
Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe
volume 01.04
Railway
ASTM A649/A649M-04
Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
volume 01.05
ASTM A650/A650M-03
Standard Specification for Tin Mill Products, Black Plate, Double Reduced
volume 01.06
ASTM A653/A653M-05a
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed)
by the Hot-Dip Process
volume 01.06
ASTM A656/A656M-05
Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved
Formability
volume 01.04
Railway
ASTM A657/A657M-03
Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double
Reduced
volume 01.06
ASTM A659/A659M-97(2001)
Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25
Maximum Percent), Hot-Rolled
volume 01.03
Bar
ASTM A660-96(2005)
Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
volume 01.01
Strona 7
ASTM A662/A662M-03
Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and
Lower Temperature Service
volume 01.04
Railway
ASTM A663/A663M-89(2000)
Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
volume 01.05
ASTM A664-99
Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
volume 03.04
Magnetic Properties
ASTM A666-03
Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat
Bar
volume 01.03
Bar
ASTM A667/A667M-87(2003)
Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
volume 01.02
ASTM A668/A668M-04
Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
volume 01.05
ASTM A671-04
Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
volume 01.01
ASTM A672-96(2005)
Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate
Temperatures
volume 01.01
ASTM A673/A673M-05a
Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
volume 01.04
Railway
ASTM A674-05
Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
volume 01.02
Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
volume 01.05
ASTM A677-05
Standard Specification for Nonoriented Electrical Steel Fully Processed Types
volume 03.04
Magnetic Properties
ASTM A678/A678M-05
Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel
Plates
volume 01.04
Railway
ASTM A679/A679M-00
Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
volume 01.03
Bar
ASTM A681-94(2004)
Standard Specification for Tool Steels Alloy
volume 01.05
ASTM A682/A682M-05
Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For&dup2;
volume 01.03
Bar
ASTM A683-05
Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
volume 03.04
Magnetic Properties
ASTM A684/A684M-86(2002)
Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
volume 01.03
Bar
ASTM A686-92(2004)
Standard Specification for Tool Steel, Carbon
volume 01.05
ASTM A688/A688M-04
Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
volume 01.01
ASTM A689-97(2002)
Standard Specification for Carbon and Alloy Steel Bars for Springs
volume 01.05
ASTM A690/A690M-05
Standard Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine
Environments
volume 01.04
Railway
ASTM A691-98(2002)
Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at
High Temperatures
volume 01.01
ASTM A693-03
Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
volume 01.03
Bar
ASTM A694/A694M-03
Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for
High-Pressure Transmission Service
volume 01.01
ASTM A696-90a(2000)
Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure
Piping Components
volume 01.05
ASTM A697/A697M-03
Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using
Voltmeter-Ammeter-Wattmeter Methods
volume 03.04
Magnetic Properties
ASTM A698/A698M-02
Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
volume 03.04
Magnetic Properties
ASTM A700-05
Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment
volume 01.05
ASTM A701-05
Standard Specification for Ferromanganese-Silicon
volume 01.02
ASTM A702-89(2000)
Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought
volume 01.05
ASTM A703/A703M-05
Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
volume 01.02
ASTM A704/A704M-05
Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
volume 01.04
Railway
ASTM A705/A705M-95(2004)
Standard Specification for Age-Hardening Stainless Steel Forgings
volume 01.03
Bar
ASTM A706/A706M-05a
Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
volume 01.04
Railway
ASTM A707/A707M-02
Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
volume 01.01
ASTM A709/A709M-05
Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars
and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
volume 01.04
Railway
ASTM A710/A710M-02
Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-MolybdenumColumbium Alloy Structural Steel Plates
volume 01.04
Railway
ASTM A711-04
Standard Specification for Steel Forging Stock
volume 01.05
ASTM A712-97(2002)
Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
volume 03.04
Magnetic Properties
ASTM A713-04
Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
volume 01.03
Bar
ASTM A714-99(2003)
Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
volume 01.01
ASTM A716-03
Standard Specification for Ductile Iron Culvert Pipe
volume 01.02
ASTM A717/A717M-01
Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
volume 03.04
Magnetic Properties
ASTM A719/A719M-02
Standard Test Method for Lamination Factor of Magnetic Materials
volume 03.04
Magnetic Properties
ASTM A720/A720M-02
Standard Test Method for Ductility of Nonoriented Electrical Steel
volume 03.04
Magnetic Properties
ASTM A721/A721M-02
Standard Test Method for Ductility of Oriented Electrical Steel
volume 03.04
Magnetic Properties
ASTM A722/A722M-05
Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete
volume 01.04
Railway
ASTM A723/A723M-02
Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
volume 01.05
ASTM A724/A724M-04
Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and
Tempered, for Welded Layered Pressure Vessels
volume 01.04
Railway
Strona 8
ASTM A726-05
Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
volume 03.04
Magnetic Properties
ASTM A727/A727M-02
Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
volume 01.01
ASTM A729/A729M-05a
Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
volume 01.05
ASTM A732/A732M-05
Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and
Cobalt Alloy for High Strength at Elevated Temperatures
volume 01.02
ASTM A733-03
Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
volume 01.01
volume 01.04
Railway
Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel,
ASTM A734/A734M-87a(2003) Quenched-and-Tempered
ASTM A735/A735M-03
Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy
Steel, for Moderate and Lower Temperature Service
volume 01.04
Railway
ASTM A736/A736M-03
Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-ChromiumMolybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel
volume 01.04
Railway
ASTM A737/A737M-99(2004)
Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
volume 01.04
Railway
ASTM A738/A738M-05
Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for
Moderate and Lower Temperature Service
volume 01.04
Railway
ASTM A739-90a(2000)
Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing
Parts, or Both
volume 01.05
ASTM A740-98(2003)
Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
volume 01.06
ASTM A741-98(2003)
Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail
volume 01.06
ASTM A742/A742M-03
Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
volume 01.06
ASTM A743/A743M-03
Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General
Application
volume 01.02
ASTM A744/A744M-00(2004)
Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
volume 01.02
ASTM A745/A745M-94(2003)
Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
volume 01.05
ASTM A746-03
Standard Specification for Ductile Iron Gravity Sewer Pipe
volume 01.02
ASTM A747/A747M-04
Standard Specification for Steel Castings, Stainless, Precipitation Hardening
volume 01.02
ASTM A748/A748M-87(2003)
Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel
Use
volume 01.02
ASTM A749/A749M-97(2002)
Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General
Requirements for
volume 01.03
Bar
ASTM A751-01
Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
volume 01.01
ASTM A751-01
volume 01.02
ASTM A751-01
volume 01.03
Bar
ASTM A751-01
volume 01.04
Railway
ASTM A751-01
volume 01.05
ASTM A752-04
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
volume 01.03
Bar
ASTM A752M-04
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
volume 01.03
Bar
ASTM A753-02
Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076,
N14080)
volume 03.04
Magnetic Properties
ASTM A754/A754M-96(2004)
Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
volume 01.06
ASTM A755/A755M-03
Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the CoilCoating Process for Exterior Exposed Building Products
volume 01.06
ASTM A756-94(2001)
Standard Specification for Stainless Anti-Friction Bearing Steel
volume 01.05
ASTM A757/A757M-00(2004)
Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other
Applications, for Low-Temperature Service
volume 01.02
ASTM A758/A758M-00(2005)
Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch
Toughness
volume 01.01
ASTM A759-00(2005)
Standard Specification for Carbon Steel Crane Rails
volume 01.04
Railway
ASTM A760/A760M-01a
Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
volume 01.06
ASTM A761/A761M-04
Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, PipeArches, and Arches
volume 01.06
ASTM A762/A762M-00
Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
volume 01.06
ASTM A763-93(2004)
Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
volume 01.03
Bar
ASTM A764-95(2001)
Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for
Mechanical Springs
volume 01.03
Bar
ASTM A765/A765M-04
Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with
Mandatory Toughness Requirements
volume 01.05
ASTM A767/A767M-05
Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
volume 01.04
Railway
ASTM A768/A768M-05
Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and
Shafts
volume 01.05
ASTM A769/A769M-05
Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
volume 01.04
Railway
ASTM A770/A770M-03
Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
volume 01.04
Railway
ASTM A772/A772M-00(2005)
Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
volume 03.04
Magnetic Properties
ASTM A773/A773M-01
Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures
with dc Electronic Hysteresigraphs
volume 03.04
Magnetic Properties
ASTM A774/A774M-02
Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive
Service at Low and Moderate Temperatures
volume 01.01
Strona 9
ASTM A775/A775M-04a
Standard Specification for Epoxy-Coated Steel Reinforcing Bars
volume 01.04
Railway
ASTM A778-01
Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
volume 01.01
ASTM A779/A779M-05
Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for
Prestressed Concrete
volume 01.04
Railway
ASTM A780-01
Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
volume 01.06
ASTM A781/A781M-05a
Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
volume 01.02
ASTM A782/A782M-90(2001)
Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-ChromiumMolybdenum-Silicon Zirconium Alloy Steel
volume 01.04
Railway
ASTM A786/A786M-05
Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor
Plates
volume 01.04
Railway
ASTM A787-05
Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
volume 01.01
ASTM A788/A788M-05c
Standard Specification for Steel Forgings, General Requirements
volume 01.05
ASTM A789/A789M-05b
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General
Service
volume 01.01
ASTM A790/A790M-05b
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
volume 01.01
ASTM A792/A792M-05
Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
volume 01.06
ASTM A793-96(2001)
Standard Specification for Rolled Floor Plate, Stainless Steel
volume 01.03
Bar
ASTM A794-97(2002)
Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 Maximum to 0.25 Maximum), ColdRolled
volume 01.03
Bar
ASTM A795/A795M-04
Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel
Pipe for Fire Protection Use
volume 01.01
ASTM A796/A796M-04a
Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and
Sanitary Sewers and Other Buried Applications
volume 01.06
ASTM A798/A798M-01
Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
volume 01.06
ASTM A799/A799M-04
Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
volume 01.02
ASTM A800/A800M-01
Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
volume 01.02
ASTM A801-04
Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)
volume 03.04
Magnetic Properties
ASTM A802/A802M-95(2001)
Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
volume 01.02
ASTM A803/A803M-03
Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes
volume 01.01
ASTM A804/A804M-04
Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using
Sheet-Type Test Specimens
volume 03.04
Magnetic Properties
ASTM A805-93(2002)
Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
volume 01.03
Bar
Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
volume 01.06
ASTM A809-03
Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
volume 01.06
ASTM A810-01
Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
volume 01.06
ASTM A811-03
Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques
volume 03.04
Magnetic Properties
ASTM A813/A813M-01(2005)
Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
volume 01.01
ASTM A814/A814M-05
Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
volume 01.01
ASTM A815/A815M-04
Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
volume 01.01
ASTM A817-03
Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension
Wire
volume 01.06
ASTM A818-91(2001)
Standard Specification for Coppered Carbon Steel Wire
volume 01.06
ASTM A820/A820M-04
Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
volume 01.04
Railway
ASTM A821/A821M-05
Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks
volume 01.04
Railway
ASTM A822/A822M-04
Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
volume 01.01
ASTM A823-99(2003)
Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
volume 01.02
ASTM A824-01
Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
volume 01.06
ASTM A827/A827M-02
Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
volume 01.04
Railway
ASTM A829/A829M-04
Standard Specification for Alloy Structural Steel Plates
volume 01.04
Railway
ASTM A830/A830M-02
Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition
Requirements
volume 01.04
Railway
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
volume 01.04
Railway
ASTM A833-84(2001)
Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
volume 01.05
ASTM A834-95(2001)
Standard Specification for Common Requirements for Iron Castings for General Industrial Use
volume 01.02
ASTM A835-84(2000)
Standard Specification for Sizes of Ferroalloys and Alloy Additives
volume 01.02
ASTM A836/A836M-02
Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure
Vessel Service
volume 01.01
ASTM A837/A837M-03
Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
volume 01.05
ASTM A838-02
Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
volume 03.04
Magnetic Properties
ASTM A839-02
Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications
volume 03.04
Magnetic Properties
ASTM A840/A840M-00(2006)
Standard Specification for Fully Processed Magnetic Lamination Steel
volume 03.04
Magnetic Properties
ASTM A841/A841M-03a
Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control
Process (TMCP)
volume 01.04
Railway
ASTM
A832/A832M99(2004)e1
Strona 10
ASTM A842-85(2004)
Standard Specification for Compacted Graphite Iron Castings
volume 01.02
ASTM A844/A844M-04
Standard Specification for Steel Plates, 9% Nickel Alloy, for Pressure Vessels, Produced by the DirectQuenching Process
volume 01.04
Railway
ASTM A847/A847M-05
Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing
with Improved Atmospheric Corrosion Resistance
volume 01.01
ASTM A848-01
Standard Specification for Low-Carbon Magnetic Iron
volume 03.04
Magnetic Properties
ASTM A849-00(2005)
Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and
Drainage Pipe
volume 01.06
ASTM A852/A852M-03
Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa]
Minimum Yield Strength to 4 in. [100 mm] Thick
volume 01.04
Railway
ASTM A853-04
Standard Specification for Steel Wire, Carbon, for General Use
volume 01.03
Bar
ASTM A854/A854M-98(2003)
Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
volume 01.06
ASTM A855/A855M-03
Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
volume 01.06
ASTM A856/A856M-03
Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
volume 01.06
ASTM A857/A857M-05
Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
volume 01.04
Railway
ASTM A858/A858M-00(2005)
Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
volume 01.01
ASTM A859/A859M-04
Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
volume 01.05
ASTM A860/A860M-00(2005)
Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
volume 01.01
ASTM A861-04
Standard Specification for High-Silicon Iron Pipe and Fittings
volume 01.02
ASTM A862/A862M-98(2003)
Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
volume 01.06
ASTM A865-03
Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or
Seamless, for Use in Steel Pipe Joints
volume 01.01
ASTM A866-01
Standard Specification for Medium Carbon Anti-Friction Bearing Steel
volume 01.05
ASTM A867-03
Standard Specification for Iron-Silicon Relay Steels
volume 03.04
Magnetic Properties
ASTM A871/A871M-03
Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion
Resistance
volume 01.04
Railway
ASTM A872/A872M-05
Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive
Environments
volume 01.02
ASTM A874/A874M-98(2004)
Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
volume 01.02
ASTM A875/A875M-05
Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process
volume 01.06
ASTM A876-03
Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
volume 03.04
Magnetic Properties
ASTM A877/A877M-05
Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality
volume 01.03
Bar
ASTM A878/A878M-05
Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
volume 01.03
Bar
ASTM A879/A879M-04
Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring
Designation of the Coating Mass on Each Surface
volume 01.06
ASTM A881/A881M-05
Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed
Concrete Railroad Ties
volume 01.04
Railway
ASTM A882/A882M-04a
Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
volume 01.04
Railway
ASTM A883/A883M-01
Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic
Magnetic Materials
volume 03.04
Magnetic Properties
ASTM A884/A884M-04
Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
volume 01.04
Railway
ASTM A885/A885M-96(2002)
Standard Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel
Sewer, Culvert, and Underdrain Pipe
volume 01.06
ASTM A886/A886M-05
Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
volume 01.04
Railway
ASTM A887-89(2004)
Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
volume 01.03
Bar
ASTM A888-05
Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and
Vent Piping Applications
volume 01.02
ASTM A889/A889M-03
Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the
Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame
volume 03.04
Magnetic Properties
ASTM A890/A890M-99(2003)
Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex
(Austenitic/Ferritic) for General Application
volume 01.02
ASTM A891-98(2003)
Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks
and Wheels
volume 01.05
ASTM A892-88(2001)
Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
volume 01.05
ASTM A893/A893M-03
Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave
Frequencies
volume 03.04
Magnetic Properties
ASTM A894/A894M-00(2005)
Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials
volume 03.04
Magnetic Properties
ASTM A895-89(2004)
Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
volume 01.03
Bar
ASTM A896-89(2004)
Standard Practice for Conducting Case Studies on Galvanized Structures
volume 01.06
ASTM A897/A897M-03
Standard Specification for Austempered Ductile Iron Castings
volume 01.02
ASTM A898/A898M-91(2001)
Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
volume 01.04
Railway
ASTM A899-91(2002)
Standard Specification for Steel Wire, Epoxy-Coated
volume 01.03
Bar
ASTM A900/A900M-01
Standard Test Method for Lamination Factor of Amorphous Magnetic Strip
volume 03.04
Magnetic Properties
ASTM A901-03
Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
volume 03.04
Magnetic Properties
ASTM A902-05a
Standard Termninology Relating to Metallic Coated Steel Products
volume 01.06
Strona 11
ASTM A903/A903M-99(2003)
Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid
Penetrant Inspection
volume 01.02
ASTM A904-04
Standard Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Parts
volume 03.04
Magnetic Properties
ASTM A905-04
Standard Specification for Steel Wire, Pressure Vessel Winding
volume 01.03
Bar
ASTM A906/A906M-02
Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
volume 01.05
ASTM A908-03
Standard Specification for Stainless Steel Needle Tubing
volume 01.01
ASTM A909-03
Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
volume 01.05
ASTM A910/A910M-05
Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete
volume 01.04
Railway
ASTM A911/A911M-05
Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties
volume 01.04
Railway
ASTM A912/A912M-04
Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power
Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
volume 03.04
Magnetic Properties
ASTM A913/A913M-04
Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by
Quenching and Self-Tempering Process (QST)
volume 01.04
Railway
ASTM A914/A914M-92(2005)
Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
volume 01.05
ASTM A915/A915M-93(2003)
Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard
Wrought Grades
volume 01.02
ASTM A917-05
Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring
Designation of the Coating Mass on Each Surface (General Requirements)
volume 01.06
ASTM A918-00(2005)
Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications
Requiring Designation of the Coating Mass on Each Surface
volume 01.06
ASTM A920/A920M-02a
Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
volume 01.05
ASTM A921/A921M-93(2005)
Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
volume 01.05
ASTM A922-05
Standard Specification for Silicon Metal
volume 01.02
ASTM A923-03
Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic
Stainless Steels
volume 01.03
Bar
ASTM A924/A924M-04
Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
volume 01.06
ASTM A925-03
Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
volume 01.06
ASTM A926-03
Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal
Pipe
volume 01.06
ASTM A927/A927M-04
Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the
Voltmeter-Ammeter-Wattmeter Method
volume 03.04
Magnetic Properties
ASTM A928/A928M-05
Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with
Addition of Filler Metal
volume 01.01
ASTM A929/A929M-01
Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
volume 01.06
ASTM A930-03
Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers,
and Other Buried Conduits
volume 01.06
ASTM A931-96(2002)
Standard Test Method for Tension Testing of Wire Ropes and Strand
volume 01.03
Bar
ASTM A932/A932M-01
Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power
Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
volume 03.04
Magnetic Properties
ASTM A933/A933M-95(2001)
Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement
volume 01.04
Railway
ASTM A934/A934M-04
Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
volume 01.04
Railway
ASTM A937/A937M-01
Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent
Test Surfaces
volume 03.04
Magnetic Properties
ASTM A938-04
Standard Test Method for Torsion Testing of Wire
volume 01.03
Bar
ASTM A939-96(2001)
Standard Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
volume 01.05
ASTM A940-96(2001)
Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine
Rotors
volume 01.05
ASTM A941-04a
Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
volume 01.01
ASTM A941-04a
volume 01.03
Bar
ASTM A941-04a
volume 01.02
ASTM A941-04a
volume 01.04
Railway
ASTM A941-04a
volume 01.05
ASTM A942-95(2001)
Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells
volume 01.02
ASTM A943/A943M-01(2005)
Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
volume 01.01
ASTM A944-05
Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End
Specimens
volume 01.04
Railway
ASTM A945/A945M-05
Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted
Sulfur for Improved Weldability, Formability, and Toughness
volume 01.04
Railway
ASTM A946-95(2004)
Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for
Corrosion and Heat Resisting Service
volume 01.03
Bar
ASTM A947M-95(2004)
Standard Specification for Textured Stainless Steel Sheet [Metric]
volume 01.03
Bar
ASTM A949/A949M-01(2005)
Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
volume 01.01
ASTM A950/A950M-99(2003)
Standard Specification for Fusion Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
volume 01.04
Railway
ASTM A951-02
Standard Specification for Masonry Joint Reinforcement
volume 01.04
Railway
Strona 12
ASTM A952/A952M-02
Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded
Attachment Links
volume 01.05
ASTM A955/A955M-05a
Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
volume 01.04
Railway
ASTM A956-02
Standard Test Method for Leeb Hardness Testing of Steel Products
volume 01.05
ASTM A957-05
Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General
Industrial Use
volume 01.02
ASTM A958-00
Standard Specification for Steel Castings, Carbon, and Alloy, with Tensile Requirements, Chemical
Requirements Similar to Standard Wrought Grades
volume 01.02
ASTM A959-04
Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
volume 01.03
Bar
ASTM A960/A960M-04a
Standard Specification for Common Requirements for Wrought Steel Piping Fittings
volume 01.01
ASTM A961/A961M-05
Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for
Piping Applications
volume 01.01
ASTM A962/A962M-04a
Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both,
Intended for Use at Any Temperature from Cryogenic to the Creep Range
volume 01.01
ASTM A964/A964M-03
Standard Specification for Corrugated Steel Box Culverts
volume 01.06
Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
volume 01.05
ASTM A966/A966M-96(2001)
Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current
volume 01.05
ASTM A967-05
Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
volume 01.03
Bar
ASTM A968/A968M-96(2001)
Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for
Corrosion and Heat-Resisting Service
volume 01.03
Bar
ASTM A970/A970M-04ae1
Standard Specification for Headed Steel Bars for Concrete Reinforcement
volume 01.04
Railway
ASTM A971/A971M-05
Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
volume 03.04
Magnetic Properties
ASTM A972/A972M-00(2004)
Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
volume 01.01
ASTM A973/A973M-01
Standard Specification for Grade 100 Alloy Steel Chain
volume 01.05
ASTM A974-97(2003)
Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl
Chloride (PVC) Coated)
volume 01.06
ASTM A975-97(2003)
Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated
Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
volume 01.06
ASTM A976-03
Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application
volume 03.04
Magnetic Properties
ASTM A977/A977M-02
Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using
Hysteresigraphs
volume 03.04
Magnetic Properties
A978/A978MASTM
97(2002)e1
Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow
Sanitary Sewers, Storm Sewers, and Other Special Applications
volume 01.06
ASTM A979/A979M-03
Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the
Field
volume 01.06
ASTM A980-97(2003)
Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
volume 01.03
Bar
ASTM A981-97(2002)
Standard Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel
Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors
volume 01.04
Railway
ASTM A982/A982M-05
Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
volume 01.05
ASTM A983/A983M-05
Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium
Speed Diesel Engines
volume 01.05
ASTM A984/A984M-03
Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded
volume 01.01
ASTM A985/A985M-04a
Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
volume 01.02
ASTM A986/A986M-01
Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
volume 01.05
ASTM A987-05
Standard Test Method for Measuring Shape Characteristics of Tin Mill Products
volume 01.06
ASTM A988/A988M-05
Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for
High Temperature Service
volume 01.01
ASTM A989/A989M-05
Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High
Temperature Service
volume 01.01
ASTM A990-05
Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for
Pressure Retaining Parts for Corrosive Service
volume 01.02
ASTM A991/A991M-98(2004)
Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat
Steel Products
volume 01.03
Bar
ASTM A992/A992M-04a
Standard Specification for Structural Steel Shapes
volume 01.04
Railway
ASTM A994-05
Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and
Related Alloys
volume 01.01
ASTM A995/A995M-98(2003)
Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing
Parts
volume 01.02
ASTM A996/A996M-05a
Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
volume 01.04
Railway
ASTM A997-98(2003)
Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
volume 01.02
ASTM A998/A998M-98(2003)
Standard Practice for Structural Design of Reinforcements for Fittings in Factory—Made Corrugated Steel
Pipe for Sewers and Other Applications
volume 01.06
ASTM A999/A999M-04a
Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
volume 01.01
ASTM A1000-05
Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
volume 01.03
Bar
ASTM A1001-01
Standard Specification for High Strength Steel Castings in Heavy Sections
volume 01.02
ASTM A1002-99(2003)
Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
volume 01.02
ASTM A1003/A1003M-05
Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing
Members
volume 01.06
Strona 13
ASTM
A1004/A1004M99(2004)
Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of
Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing
Members
volume 01.06
ASTM
A1005/A1005M00(2004)
Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double
Submerged-Arc Welded
volume 01.01
ASTM
A1006/A1006M00(2004)
Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded
volume 01.01
ASTM A1007-02
Standard Specification for Carbon Steel Wire for Wire Rope
volume 01.03
Bar
ASTM A1008/A1008M-05b
Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, HighStrength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
volume 01.03
Bar
ASTM A1009-05
Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz)
Power Transformer and Filter Inductor Applications
volume 03.04
Magnetic Properties
ASTM A1010/A1010M-01e1
Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip
volume 01.03
Bar
ASTM A1011/A1011M-05a
Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy
and High-Strength Low-Alloy with Improved Formability
volume 01.03
Bar
ASTM A1012-02
Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and
Heat Exchanger Tubes With Integral Fins
volume 01.01
ASTM A1013-00(2005)
Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at
Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
volume 03.04
Magnetic Properties
ASTM A1014-03
Standard Specification for Precipitation-Hardening Bolting Material (UNS N07718) for High Temperature
Service
volume 01.01
ASTM A1015-01(2005)
Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
volume 01.01
ASTM A1016/A1016M-04a
Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes
volume 01.01
ASTM A1017/A1017M-05
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
volume 01.04
Railway
ASTM A1018/A1018M-05b
Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial,
Drawing, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability
volume 01.03
Bar
ASTM A1019/A1019M-01
Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer
Precoated for Sewers and Drains
volume 01.06
ASTM A1020/A1020M-02
Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler,
Superheater, Heat Exchanger and Condenser Applications
volume 01.01
ASTM A1021/A1021M-05
Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature
Service
volume 01.05
ASTM A1022-01
Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete
Reinforcement
volume 01.04
Railway
ASTM A1023/A1023M-02
Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes
volume 01.03
Bar
ASTM A1024/A1024M-02
Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
volume 01.01
ASTM A1025-05
Standard Specification for Ferroalloys, General Requirements
volume 01.02
ASTM A1026-03
Standard Specification for Alloy Steel Structural Shapes for Use in Building Framing
volume 01.04
Railway
ASTM A1028-03
Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils
volume 01.03
Bar
ASTM A1030/A1030M-05
Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
volume 01.06
ASTM A1031-05
Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and
Structural Steel, Hot-Rolled
volume 01.03
Bar
ASTM A1032-04
Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for
Prestressing Concrete Pipe
volume 01.04
Railway
ASTM A1033-04
Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy
Steel Phase Transformations
volume 01.03
Bar
ASTM A1034/A1034M-05b
Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
volume 01.04
Railway
ASTM A1035/A1035M-05
Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete
Reinforcement
volume 01.04
Railway
ASTM A1036-04
Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using
Small Single Sheet Testers
volume 03.04
Magnetic Properties
ASTM A1037/A1037M-05
Standard Specification for Steel Line Pipe, Black, Furnace-butt-Welded
volume 01.01
ASTM A1038-05
Standard Practice for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
volume 01.05
ASTM A1039/A1039M-04
Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial and Structural, Produced by the
Twin-Roll Casting Process
volume 01.03
Bar
ASTM A1040-04
Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy,
and Alloy Steels
volume 01.05
ASTM A1041/A1041M-04
Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-MolybdenumTungsten
volume 01.04
Railway
ASTM A1042/A1042M-04
Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains
volume 01.06
ASTM A1043/A1043M-05
Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
volume 01.04
Railway
ASTM A1044/A1044M-05
Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
volume 01.04
Railway
ASTM A1045-05
Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Water Closets
to Sanitary Drainage System
volume 01.02
ASTM B1-01
Standard Specification for Hard-Drawn Copper Wire
volume 02.03
Electrical Conductors
ASTM B2-00(2005)e1
Standard Specification for Medium-Hard-Drawn Copper Wire
volume 02.03
ASTM B3-01
Standard Specification for Soft or Annealed Copper Wire
volume 02.03
ASTM B5-00(2005)
Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
volume 02.01
Copper and Copper Alloys
Strona 14
ASTM B6-03
Standard Specification for Zinc
volume 02.04
Nonferrous Metals - Nickel, Cobalt, Lead, Tin,
Zinc, Cadmium, Precious, Reactive, Refractory
Metals and Alloys; Materials for Thermostats,
Electrical Heating and Resistance Contacts,
and Connectors
ASTM B8-04
Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
volume 02.03
ASTM B9-90(2003)
Standard Specification for Bronze Trolley Wire
volume 02.03
ASTM B16/B16M-05
Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
volume 02.01
ASTM B19-05
Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
volume 02.01
ASTM B21/B21M-06
Standard Specification for Naval Brass Rod, Bar, and Shapes
volume 02.01
ASTM B22-02
Standard Specification for Bronze Castings for Bridges and Turntables
volume 02.01
ASTM B23-00(2005)
Standard Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal")
volume 02.04
and Connectors
ASTM B26/B26M-05
Standard Specification for Aluminum-Alloy Sand Castings
volume 02.02
Aluminum and Magnesium Alloys
ASTM B29-03
Standard Specification for Refined Lead
volume 02.04
and Connectors
ASTM B30-05
Standard Specification for Copper Alloys in Ingot Form
volume 02.01
ASTM B32-04
Standard Specification for Solder Metal
volume 02.04
and Connectors
ASTM B33-04
Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes
volume 02.03
ASTM B36/B36M-06
Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
volume 02.01
ASTM B37-03
Standard Specification for Aluminum for Use in Iron and Steel Manufacture
volume 02.02
ASTM B39-79(2004)
Standard Specification for Nickel
volume 02.04
and Connectors
ASTM B42-02e1
Standard Specification for Seamless Copper Pipe, Standard Sizes
volume 02.01
ASTM B43-98(2004)
Standard Specification for Seamless Red Brass Pipe, Standard Sizes
volume 02.01
ASTM B47-95a(2001)
Standard Specification for Copper Trolley Wire
volume 02.03
ASTM B48-00(2005)e1
Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
volume 02.03
ASTM B49-98(2004)
Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
volume 02.01
ASTM B61-02
Standard Specification for Steam or Valve Bronze Castings
volume 02.01
ASTM B62-02
Standard Specification for Composition Bronze or Ounce Metal Castings
volume 02.01
ASTM B63-90(2001)
Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
volume 02.04
and Connectors
ASTM B66-95(2003)
Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts
volume 02.01
ASTM B67-05
Standard Specification for Car and Tender Journal Bearings, Lined
volume 02.01
ASTM B68-02
Standard Specification for Seamless Copper Tube, Bright Annealed
volume 02.01
ASTM B68M-99(2005)
Standard Specification for Seamless Copper Tube, Bright Annealed [Metric]
volume 02.01
ASTM B69-01a(2005)
Standard Specification for Rolled Zinc
volume 02.04
and Connectors
ASTM B70-90(2001)
Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical
Heating
volume 02.04
and Connectors
ASTM B75-02
Standard Specification for Seamless Copper Tube
volume 02.01
ASTM B75M-99(2005)
Standard Specification for Seamless Copper Tube [Metric]
volume 02.01
ASTM B76-90(2001)
Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for
Electrical Heating
volume 02.04
and Connectors
ASTM B77-81(2001)
Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
volume 02.04
and Connectors
ASTM B78-90(2001)
Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
volume 02.04
and Connectors
ASTM B80-05
Standard Specification for Magnesium-Alloy Sand Castings
volume 02.02
ASTM B84-90(2001)
Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
volume 02.04
and Connectors
ASTM B85-03
Standard Specification for Aluminum-Alloy Die Castings
volume 02.02
ASTM B86-05
Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
volume 02.04
and Connectors
ASTM B88-03
Standard Specification for Seamless Copper Water Tube
volume 02.01
ASTM B88M-05
Standard Specification for Seamless Copper Water Tube [Metric]
volume 02.01
Strona 15
ASTM B90/B90M-98(2005)
Standard Specification for Magnesium-Alloy Sheet and Plate
volume 02.02
ASTM B91-97(2004)
Standard Specification for Magnesium-Alloy Forgings
volume 02.02
ASTM B92/B92M-01
Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
volume 02.02
ASTM B93/B93M-05
Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings,
and Die Castings
volume 02.02
ASTM B94-05
Standard Specification for Magnesium-Alloy Die Castings
volume 02.02
ASTM B96/B96M-06
Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and
Pressure Vessels
volume 02.01
ASTM B98/B98M-03
Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes
volume 02.01
ASTM B99/B99M-06
Standard Specification for Copper-Silicon Alloy Wire for General Applications
volume 02.01
ASTM B100-03a
Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and
Other Structural Use
volume 02.01
ASTM B101-02
Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
volume 02.01
ASTM B102-00(2005)
Standard Specification for Lead- and Tin-Alloy Die Castings
volume 02.04
and Connectors
ASTM B103/B103M-04
Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
volume 02.01
ASTM B105-05
Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
volume 02.03
ASTM B106-96(2002)e1
Standard Test Methods for Flexivity of Thermostat Metals
volume 02.04
and Connectors
ASTM B107/B107M-06
Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
volume 02.02
ASTM B108-03a
Standard Specification for Aluminum-Alloy Permanent Mold Castings
volume 02.02
ASTM B111/B111M-04
Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
volume 02.01
ASTM B114-90(2001)
Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision
Resistors
volume 02.04
and Connectors
ASTM B115-00(2004)
Standard Specification for Electrolytic Copper Cathode
volume 02.01
ASTM B116-95(2001)
Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage
volume 02.03
ASTM B117-03
Standard Practice for Operating Salt Spray (Fog) Apparatus
volume 03.02
Wear and Erosion; Metal Corrosion
ASTM B121/B121M-01(2006)
Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
volume 02.01
ASTM B122/B122M-06
Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and CopperNickel Alloy Plate, Sheet, Strip, and Rolled Bar
volume 02.01
ASTM B124/B124M-06
Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
volume 02.01
ASTM B127-05
Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
volume 02.04
and Connectors
ASTM B129-02
Standard Specification for Cartridge Brass Cartridge Case Cups
volume 02.01
ASTM B130-02
Standard Specification for Commercial Bronze Strip for Bullet Jackets
volume 02.01
ASTM B131-02
Standard Specification for Copper Alloy Bullet Jacket Cups
volume 02.01
ASTM B134/B134M-05
Standard Specification for Brass Wire
volume 02.01
ASTM B135-02
Standard Specification for Seamless Brass Tube
volume 02.01
ASTM B135M-00e1
Standard Specification for Seamless Brass Tube [Metric]
volume 02.01
ASTM B136-84(2003)
Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
volume 02.05
Metallic and Inorganic Coatings; Metal
Powders, Sintered P/M Structural Parts
ASTM B137-95(2004)
Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
volume 02.05
ASTM B138/B138M-06
Standard Specification for Manganese Bronze Rod, Bar, and Shapes
volume 02.01
ASTM B139/B139M-06
Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
volume 02.01
ASTM B140/B140M-01
Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
volume 02.01
ASTM B148-97(2003)e1
Standard Specification for Aluminum-Bronze Sand Castings
volume 02.01
ASTM B150/B150M-03
Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
volume 02.01
ASTM B151/B151M-05
Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
volume 02.01
ASTM B152/B152M-06
Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
volume 02.01
ASTM B153-05
Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
volume 02.01
ASTM B154-05
Standard Test Method for Mercurous Nitrate Test for Copper and Copper Alloys
volume 02.01
ASTM B159/B159M-05
Standard Specification for Phosphor Bronze Wire
volume 02.01
ASTM B160-05
Standard Specification for Nickel Rod and Bar
volume 02.04
and Connectors
ASTM B161-05
Standard Specification for Nickel Seamless Pipe and Tube
volume 02.04
and Connectors
ASTM B162-99(2005)
Standard Specification for Nickel Plate, Sheet, and Strip
volume 02.04
and Connectors
Strona 16
ASTM B163-04
Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
volume 02.04
and Connectors
ASTM B164-03
Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
volume 02.04
and Connectors
ASTM B165-05
Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
volume 02.04
and Connectors
ASTM B166-04
Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire
volume 02.04
and Connectors
ASTM B167-05a
Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and
Tube
volume 02.04
and Connectors
ASTM B168-01(2005)
Standard Specification Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and
Strip
volume 02.04
and Connectors
ASTM B169/B169M-05
Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
volume 02.01
ASTM B170-99(2004)
Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
volume 02.01
ASTM B171/B171M-04e1
Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat
Exchangers
volume 02.01
ASTM B172-01a
Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for
volume 02.03
ASTM B173-01a
Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members,
for Electrical Conductors
volume 02.03
ASTM B174-02
Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
volume 02.03
ASTM B176-04
Standard Specification for Copper-Alloy Die Castings
volume 02.01
ASTM B177-01(2006)e1
Standard Guide for Engineering Chromium Electroplating
volume 02.05
ASTM B179-03
Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting
Processes
volume 02.02
ASTM B183-79(2004)e1
Standard Practice for Preparation of Low-Carbon Steel for Electroplating
volume 02.05
ASTM B187/B187M-03
Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
volume 02.01
ASTM B188-02
Standard Specification for Seamless Copper Bus Pipe and Tube
volume 02.01
ASTM B189-05
Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
volume 02.03
ASTM B193-02
Standard Test Method for Resistivity of Electrical Conductor Materials
volume 02.03
ASTM B194-01e1
Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
volume 02.01
ASTM B196/B196M-03
Standard Specification for Copper-Beryllium Alloy Rod and Bar
volume 02.01
ASTM B197/B197M-01
Standard Specification for Copper-Beryllium Alloy Wire
volume 02.01
ASTM B199-99(2005)
Standard Specification for Magnesium-Alloy Permanent Mold Castings
volume 02.02
ASTM B200-85(2004)
Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous
Alloys
volume 02.05
ASTM B201-80(2004)
Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
volume 02.05
ASTM B206/B206M-97(2002)
Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) Wire and Copper-Nickel Alloy Wire
volume 02.01
ASTM B208-06
Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold,
Centrifugal, and Continuous Castings
volume 02.01
ASTM B209-06
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
volume 02.02
ASTM B209M-06
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
volume 02.02
ASTM B210-04
Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
volume 02.02
ASTM B210M-05
Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
volume 02.02
ASTM B211-03
Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
volume 02.02
ASTM B211M-03
Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric]
volume 02.02
ASTM B212-99(2006)
Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter
Funnel
volume 02.05
ASTM B213-03
Standard Test Method for Flow Rate of Metal Powders
volume 02.05
ASTM B214-99
Standard Test Method for Sieve Analysis of Metal Powders
volume 02.05
ASTM B215-04
Standard Practices for Sampling Metal Powders
volume 02.05
ASTM B216-97(2003)
Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
volume 02.01
ASTM B221-05a
Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
volume 02.02
ASTM B221M-05a
Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
[Metric]
volume 02.02
ASTM B223-03
Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
volume 02.04
and Connectors
ASTM B224-04
Standard Classification of Coppers
volume 02.01
ASTM B226-04
Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
volume 02.03
ASTM B227-04
Standard Specification for Hard-Drawn Copper-Clad Steel Wire
volume 02.03
Strona 17
ASTM B228-04
Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
volume 02.03
ASTM B229-04
Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
volume 02.03
ASTM B230/B230M-99(2004)
Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes
volume 02.03
ASTM B231/B231M-04
Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
volume 02.03
Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced
(ACSR)
volume 02.03
ASTM B233-97(2003)e1
Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
volume 02.03
ASTM B234-04
Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat
Exchangers
volume 02.02
ASTM B234M-04
Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat
Exchangers [Metric]
volume 02.02
ASTM B236-00(2006)
Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
volume 02.02
ASTM B236M-00(2006)
Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]
volume 02.02
ASTM B237-01
Standard Specification for Refined Antimony
volume 02.04
and Connectors
ASTM B240-05
Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
volume 02.04
and Connectors
ASTM B241/B241M-02
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
volume 02.02
ASTM B242-99(2004)e1
Standard Guide for Preparation of High-Carbon Steel for Electroplating
volume 02.05
ASTM B243-05b
Standard Terminology of Powder Metallurgy
volume 02.05
ASTM B244-97(2002)
Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other
Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
volume 02.05
ASTM B246-05
Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical
Purposes
volume 02.03
ASTM B247-02a
Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring
Forgings
volume 02.02
ASTM B247M-02a
Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring
Forgings [Metric]
volume 02.02
ASTM B248-01e1
Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip,
and Rolled Bar
volume 02.01
ASTM B248M-01e1
Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip
and Rolled Bar [Metric]
volume 02.01
ASTM B249/B249M-06
Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes
and Forgings
volume 02.01
Standard Specification for General Requirements for Wrought Copper Alloy Wire
volume 02.01
ASTM B251-02e1
Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
volume 02.01
ASTM B251M-97(2003)
Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
[Metric]
volume 02.01
ASTM B252-92(2004)
Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
volume 02.05
ASTM B253-87(2005)e1
Standard Guide for Preparation of Aluminum Alloys for Electroplating
volume 02.05
ASTM B254-92(2004)e1
Standard Practice for Preparation of and Electroplating on Stainless Steel
volume 02.05
ASTM B258-02
Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid
Round Wires Used as Electrical Conductors
volume 02.03
ASTM B263-04
Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
volume 02.03
ASTM B265-05e1
Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
volume 02.04
and Connectors
ASTM B267-90(2001)
Standard Specification for Wire for Use In Wire-Wound Resistors
volume 02.04
and Connectors
ASTM B271-96(2003)
Standard Specification for Copper-Base Alloy Centrifugal Castings
volume 02.01
ASTM B272-02
Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
volume 02.01
ASTM B275-05
Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
volume 02.02
ASTM B276-05
Standard Test Method for Apparent Porosity in Cemented Carbides
volume 02.05
ASTM B277-95(2001)
Standard Test Method for Hardness of Electrical Contact Materials
volume 02.04
and Connectors
ASTM B279-04
Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for
Magnet Wire Fabrication
volume 02.03
ASTM B280-03
Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
volume 02.01
ASTM B281-88(2001)
Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion
Coatings
volume 02.05
ASTM B283-06
Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
volume 02.01
ASTM B286-02
Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
volume 02.03
ASTM B294-92(2006)
Standard Test Method for Hardness Testing of Cemented Carbides
volume 02.05
ASTM B296-03
Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
volume 02.02
Strona 18
ASTM B298-99e1
Standard Specification for Silver-Coated Soft or Annealed Copper Wire
volume 02.03
ASTM B299-01
Standard Specification for Titanium Sponge
volume 02.04
and Connectors
ASTM B301/B301M-04
Standard Specification for Free-Cutting Copper Rod, Bar, Wire and Shapes
volume 02.01
ASTM B302-02
Standard Specification for Threadless Copper Pipe, Standard Sizes
volume 02.01
ASTM B306-02
Standard Specification for Copper Drainage Tube (DWV)
volume 02.01
ASTM B308/B308M-02
Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
volume 02.02
ASTM B311-93(2002)e1
Test Method for Density Determination for Powder Metallurgy (P/M) Materials Containing Less Than Two
Percent Porosity
volume 02.05
ASTM B312-96(2002)
Standard Test Method for Green Strength for Compacted Metal Powder Specimens
volume 02.05
Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
volume 02.02
ASTM B315-06
Standard Specification for Seamless Copper Alloy Pipe and Tube
volume 02.01
ASTM B316/B316M-02
Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
volume 02.02
ASTM B317/B317M-04
Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, and Structural Profiles for
Electrical Purposes (Bus Conductor)
volume 02.02
ASTM B319-91(2004)
Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
volume 02.05
ASTM B320-60(2003)e1
Standard Practice for Preparation of Iron Castings for Electroplating
volume 02.05
ASTM B322-99(2004)
Standard Guide for Cleaning Metals Prior to Electroplating
volume 02.05
ASTM B324-01
Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
volume 02.03
ASTM B327-01(2005)
Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
volume 02.04
and Connectors
ASTM B328-96(2003)
Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural
Parts and Oil-Impregnated Bearings
volume 02.05
ASTM B329-98(2003)e1
Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
volume 02.05
ASTM B330-05
Standard Test Method for Fisher Number of Metal Powders and Related Compounds
volume 02.05
ASTM B331-95(2002)
Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
volume 02.05
ASTM B333-03
Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
volume 02.04
and Connectors
ASTM B335-03
Standard Specification for Nickel-Molybdenum Alloy Rod
volume 02.04
and Connectors
ASTM B338-05b
Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and
Heat Exchangers
volume 02.04
and Connectors
ASTM B339-00(2005)
Standard Specification for Pig Tin
volume 02.04
and Connectors
ASTM B341/B341M-02
Standard Specification for Aluminum-Coated (Aluminized) Steel Core Wire for Aluminum Conductors, Steel
Reinforced (ACSR/AZ)
volume 02.03
ASTM B343-92a(2004)e1
Standard Practice for Preparation of Nickel for Electroplating with Nickel
volume 02.05
ASTM B344-01
Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical
Heating Elements
volume 02.04
and Connectors
ASTM B345/B345M-02
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for
Gas and Oil Transmission and Distribution Piping Systems
volume 02.02
ASTM B348-05e1
Standard Specification for Titanium and Titanium Alloy Bars and Billets
volume 02.04
and Connectors
ASTM B349/B349M-03
Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
volume 02.04
and Connectors
ASTM B350/B350M-02
Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
volume 02.04
and Connectors
ASTM B351/B351M-02
Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire
for Nuclear Application
volume 02.04
and Connectors
ASTM B352/B352M-02
Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
volume 02.04
and Connectors
ASTM B353-02
Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear
Service (Except Nuclear Fuel Cladding)
volume 02.04
and Connectors
ASTM B354-05
Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
volume 02.03
Strona 19
ASTM B355-95(2003)
Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
volume 02.03
ASTM B359/B359M-02
Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With
Integral Fins
volume 02.01
ASTM B360-01
Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
volume 02.01
ASTM B361-02
Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
volume 02.02
ASTM B362-91(2003)
Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
volume 02.04
and Connectors
ASTM B363-04
Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
volume 02.04
and Connectors
ASTM B364-96(2002)
Standard Specification for Tantalum and Tantalum Alloy Ingots
volume 02.04
and Connectors
ASTM B365-98(2004)
Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
volume 02.04
and Connectors
ASTM B366-04b
Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
volume 02.04
and Connectors
ASTM B367-06
Standard Specification for Titanium and Titanium Alloy Castings
volume 02.04
and Connectors
ASTM B368-97(2003)e1
Standard Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
volume 02.05
ASTM B369-96(2003)
Standard Specification for Copper-Nickel Alloy Castings
volume 02.01
ASTM B370-03
Standard Specification for Copper Sheet and Strip for Building Construction
volume 02.01
ASTM B371/B371M-05
Standard Specification for Copper-Zinc-Silicon Alloy Rod
volume 02.01
ASTM B372-97(2003)
Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
volume 02.01
ASTM B373-00
Standard Specification for Aluminum Foil for Capacitors
volume 02.02
ASTM B374-96(2003)
Standard Terminology Relating to Electroplating
volume 02.05
ASTM B379-04
Standard Specification for Phosphorized Coppers—Refinery Shapes
volume 02.01
ASTM B380-97(2002)
Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote
Procedure
volume 02.05
ASTM B381-05e1
Standard Specification for Titanium and Titanium Alloy Forgings
volume 02.04
and Connectors
ASTM B386-03
Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
volume 02.04
and Connectors
ASTM B387-90(2001)
Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
volume 02.04
and Connectors
ASTM B388-00
Standard Specification for Thermostat Metal Sheet and Strip
volume 02.04
and Connectors
ASTM B389-81(2004)
Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
volume 02.04
and Connectors
ASTM B390-92(2006)
Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
volume 02.05
ASTM B391-03
Standard Specification for Niobium and Niobium Alloy Ingots
volume 02.04
and Connectors
ASTM B392-03
Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
volume 02.04
and Connectors
ASTM B393-05
Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
volume 02.04
and Connectors
ASTM B394-03
Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
volume 02.04
and Connectors
ASTM B395/B395M-02
Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser
Tubes
volume 02.01
ASTM B398/B398M-02
Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
volume 02.03
ASTM B399/B399M-04
Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
volume 02.03
ASTM B400-04
Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
volume 02.03
ASTM B401-04
Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, SteelReinforced (ACSR/COMP)
volume 02.03
ASTM B403-02
Standard Specification for Magnesium-Alloy Investment Castings
volume 02.02
Strona 20
ASTM B406-96(2005)
Standard Test Method for Transverse Rupture Strength of Cemented Carbides
volume 02.05
ASTM B407-04
Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
volume 02.04
and Connectors
ASTM B408-01
Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
volume 02.04
and Connectors
ASTM B409-01
Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
volume 02.04
and Connectors
ASTM B411/B411M-01
Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
volume 02.01
ASTM B413-97a(2003)
Standard Specification for Refined Silver
volume 02.04
and Connectors
ASTM B415-98(2002)
Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
volume 02.03
ASTM B416-98(2002)
Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
volume 02.03
ASTM B417-00
Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
volume 02.05
ASTM B418-01
Standard Specification for Cast and Wrought Galvanic Zinc Anodes
volume 02.04
and Connectors
ASTM B422-05
Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy,
Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet
and Strip
volume 02.01
ASTM B423-05
Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)*
Seamless Pipe and Tube
volume 02.04
and Connectors
ASTM B424-05
Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip
volume 02.04
and Connectors
ASTM B425-99(2005)
Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar
volume 02.04
and Connectors
ASTM B427-02
Standard Specification for Gear Bronze Alloy Castings
volume 02.01
ASTM B428-93(2004)
Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
volume 02.01
ASTM B429/B429M-06
Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
volume 02.02
ASTM B430-97(2001)e1
Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by
Turbidimetry
volume 02.05
ASTM B432-04
Standard Specification for Copper and Copper Alloy Clad Steel Plate
volume 02.01
ASTM B434-00
Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate,
Sheet, and Strip
volume 02.04
and Connectors
ASTM B435-03
Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and
Strip
volume 02.04
and Connectors
ASTM B438/B438M-05
Specification for Bronze Powder Metallurgy (P/M) Bearing (Oil-Impregnated)
volume 02.05
ASTM B439-00e1
Standard Specification for Iron-Base Sintered Bearings (Oil-Impregnated)
volume 02.05
ASTM B440-00(2005)
Standard Specification for Cadmium
volume 02.04
and Connectors
ASTM B441-04
Standard Specification for Copper-Cobalt-Beryllium and Copper-Nickel-Beryllium Rod and Bar (UNS Nos.
C17500 and C17510)
volume 02.01
ASTM B443-00(2005)
Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and NickelChromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip
volume 02.04
and Connectors
ASTM B444-04
Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625) and NickelChromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
volume 02.04
and Connectors
ASTM B446-03
Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), NickelChromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy
(UNS N06650)* Rod and Bar
volume 02.04
and Connectors
ASTM B447-02
Standard Specification for Welded Copper Tube
volume 02.01
ASTM B449-93(2004)
Standard Specification for Chromates on Aluminum
volume 02.05
ASTM B452-02
Standard Specification for Copper-Clad Steel Wire for Electronic Application
volume 02.03
ASTM B453/B453M-05
Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
volume 02.01
ASTM B455-05
Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
volume 02.01
ASTM B456-03
Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus
Chromium
volume 02.05
ASTM B457-67(2003)
Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
volume 02.05
Strona 21
ASTM B462-04
Specification for Forged or Rolled UNS
N06030,N06022,N06035,N06200,N06059,N06686,N08020,N08024,N08026,N08367,N10276,N10665,
N10675,N10629, N08031,N06045, N06025, & R20033 Alloy Pipe Flanges, Forged Fitting, & Values & Parts
for Corrosive
volume 02.04
and Connectors
ASTM B463-04
Standard Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip
volume 02.04
and Connectors
ASTM B464-05
Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe
volume 02.04
and Connectors
ASTM B465-04
Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
volume 02.01
ASTM B466/B466M-03
Standard Specification for Seamless Copper-Nickel Pipe and Tube
volume 02.01
ASTM B467-88(2003)
Standard Specification for Welded Copper-Nickel Pipe
volume 02.01
ASTM B468-04
Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes
volume 02.04
and Connectors
ASTM B470-02
Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
volume 02.03
ASTM B472-04a
Standard Specification for Nickel Alloy Billets and Bars for Reforging
volume 02.04
and Connectors
ASTM B473-96(2002)e1
Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
volume 02.04
and Connectors
ASTM B474-03
Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
volume 02.04
and Connectors
ASTM B475-96(2002)e1
Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
volume 02.04
and Connectors
ASTM B476-01
Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
volume 02.04
and Connectors
ASTM B477-97(2002)
Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy
volume 02.04
and Connectors
ASTM B478-85(2003)
Standard Test Method for Cross Curvature of Thermostat Metals
volume 02.04
and Connectors
ASTM B479-06
Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact,
and Other Applications
volume 02.02
ASTM B480-88(2006)
Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
volume 02.05
ASTM B481-68(2003)e1
Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating
volume 02.05
ASTM B482-85(2003)
Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
volume 02.05
ASTM B483/B483M-03
Standard Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications
volume 02.02
ASTM B487-85(2002)
Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical
Examination of a Cross Section
volume 02.05
ASTM B488-01(2006)
Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
volume 02.05
ASTM B489-85(2003)
Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal
Coatings on Metals
volume 02.05
ASTM B490-92(2003)
Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
volume 02.05
ASTM B491/B491M-06
Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose
Applications
volume 02.02
ASTM B493-01(2003)
Standard Specification for Zirconium and Zirconium Alloy Forgings
volume 02.04
and Connectors
ASTM B494/B494M-03
Standard Specification for Primary Zirconium
volume 02.04
and Connectors
ASTM B495-05
Standard Specification for Zirconium and Zirconium Alloy Ingots
volume 02.04
and Connectors
ASTM B496-04
Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
volume 02.03
ASTM B497-00
Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts
volume 02.04
and Connectors
ASTM B498/B498M-98(2002)
Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel
Reinforced (ACSR)
volume 02.03
ASTM B499-96(2002)
Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic
Coatings on Magnetic Basis Metals
volume 02.05
ASTM B500/B500M-98(2002)
Standard Specification for Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced
(ACSR)
volume 02.03
Strona 22
ASTM B501-04
Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
volume 02.03
ASTM B502-02
Standard Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel
Reinforced
volume 02.03
ASTM B504-90(2002)
Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
volume 02.05
Standard Specification for Copper-Base Alloy Continuous Castings
volume 02.01
ASTM B507-86(2003)
Standard Practice for Design of Articles To Be Electroplated on Racks
volume 02.05
ASTM B508-97(2003)
Standard Specification for Copper Alloy Strip for Flexible Metal Hose
volume 02.01
ASTM B511-01(2005)
Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
volume 02.04
and Connectors
ASTM B512-04
Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
volume 02.04
and Connectors
ASTM B514-05
Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
volume 02.04
and Connectors
ASTM B515-95(2002)
Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
volume 02.04
and Connectors
ASTM B516-03
Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025,
and UNS N06045 Tubes
volume 02.04
and Connectors
ASTM B517-05
Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025,
and UNS N06045) Pipe
volume 02.04
and Connectors
ASTM B520-93(2002)e1
Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
volume 02.03
ASTM B521-98(2004)
Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
volume 02.04
and Connectors
ASTM B522-01
Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy
volume 02.04
and Connectors
ASTM B523/B523M-02
Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
volume 02.04
and Connectors
ASTM B524/B524M-99(2005)
Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced
(ACAR, 1350/6201)
volume 02.03
ASTM B527-93(2000)e1
Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
volume 02.05
ASTM B528-05
Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
volume 02.05
ASTM B530-02
Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited
Nickel Coatings on Magnetic and Nonmagnetic Substrates
volume 02.05
ASTM B532-85(2002)
Standard Specification for Appearance of Electroplated Plastic Surfaces
volume 02.05
ASTM B533-85(2004)
Standard Test Method for Peel Strength of Metal Electroplated Plastics
volume 02.05
ASTM B534-01
Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet,
Strip, and Rolled Bar
volume 02.01
ASTM B535-04
Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe
and Tube
volume 02.04
and Connectors
ASTM B536-02
Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet,
and Strip
volume 02.04
and Connectors
ASTM B537-70(2002)e1
Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
volume 02.05
ASTM B539-02e1
Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
volume 02.04
and Connectors
ASTM B540-97(2002)
Standard Specification for Palladium Electrical Contact Alloy
volume 02.04
and Connectors
ASTM B541-01
Standard Specification for Gold Electrical Contact Alloy
volume 02.04
and Connectors
ASTM B542-04
Standard Termninology Relating to Electrical Contacts and Their Use
volume 02.04
and Connectors
ASTM B543-96(2003)
Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
volume 02.01
ASTM B545-97(2004)e1
Standard Specification for Electrodeposited Coatings of Tin
volume 02.05
Strona 23
ASTM B546-04
Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys
(UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and NiCr-Fe-Si Alloy (UNS N06045) Pipe
volume 02.04
and Connectors
ASTM B547/B547M-02
Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
volume 02.02
ASTM B548-03
Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
volume 02.02
ASTM B549-04
Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced
(ACSR/AW)
volume 02.03
ASTM B550/B550M-02
Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
volume 02.04
and Connectors
Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
volume 02.04
and Connectors
ASTM B552-98(2004)
Standard Specification for Seamless and Welded Copper--Nickel Tubes For Water Desalting Plants
volume 02.01
ASTM B555-86(2002)
Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by the Dropping Test
volume 02.05
ASTM B556-90(2002)
Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
volume 02.05
ASTM B557-06
Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
volume 02.02
ASTM B557M-06
Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
[Metric]
volume 02.02
ASTM B558-79(2003)
Standard Practice for Preparation of Nickel Alloys for Electroplating
volume 02.05
ASTM B559-93(2002)e1
Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
volume 02.03
ASTM B560-00(2005)
Standard Specification for Modern Pewter Alloys
volume 02.04
and Connectors
ASTM B561-94(2005)
Standard Specification for Refined Platinum
volume 02.04
and Connectors
ASTM B562-95(2005)
Standard Specification for Refined Gold
volume 02.04
and Connectors
ASTM B563-01
Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy
volume 02.04
and Connectors
ASTM B564-04
Standard Specification for Nickel Alloy Forgings
volume 02.04
and Connectors
ASTM B565-04
Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire
and Rods
volume 02.02
ASTM B566-04a
Standard Specification for Copper-Clad Aluminum Wire
volume 02.03
ASTM B567-98(2003)
Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
volume 02.05
ASTM B568-98(2004)
Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
volume 02.05
ASTM B569-04
Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
volume 02.01
ASTM B570-05a
Standard Specification for Copper-Beryllium Alloy (UNS No. C17000 and C17200) Forgings and Extrusions
volume 02.01
ASTM B571-97(2003)
Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
volume 02.05
ASTM B572-03
Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
volume 02.04
and Connectors
ASTM B573-00
Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloy (UNS N10003, N10242)* Rod
volume 02.04
and Connectors
ASTM B574-05
Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-MolybdenumChromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon NickelChromium-Molybdenum-Tungsten Alloy Rod
volume 02.04
and Connectors
ASTM B575-04
Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-MolybdenumCopper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-ChromiumMolybdenum-Tungsten Alloy Plate, Sheet, and Strip
volume 02.04
and Connectors
ASTM B576-94(2005)
Standard Guide for Arc Erosion Testing of Electrical Contact Materials
volume 02.04
and Connectors
ASTM B577-93(2004)e1
Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
volume 02.01
ASTM B578-87(2004)
Standard Test Method for Microhardness of Electroplated Coatings
volume 02.05
ASTM B579-73(2004)
Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
volume 02.05
ASTM B580-79(2004)
Standard Specification for Anodic Oxide Coatings on Aluminum
volume 02.05
ASTM B581-02
Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
volume 02.04
and Connectors
Strona 24
ASTM B582-02
Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
volume 02.04
and Connectors
ASTM B584-06
Standard Specification for Copper Alloy Sand Castings for General Applications
volume 02.01
ASTM B587-97(2003)
Standard Specification for Welded Brass Tube
volume 02.01
ASTM B588-88(2006)
Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam
Interference Microscope Technique
volume 02.05
ASTM B589-94(2005)
Standard Specification for Refined Palladium
volume 02.04
and Connectors
ASTM B591-04
Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and
Rolled Bar
volume 02.01
ASTM B592-01(2006)
Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet,
Strip, and Rolled Bar
volume 02.01
ASTM B593-96(2003)e1
Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
volume 02.01
ASTM B594-02
Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
volume 02.02
ASTM B595-95(2000)
Standard Specification for Sintered Aluminum Structural Parts
volume 02.05
ASTM B596-89(1999)
Standard Specification for Gold-Copper Alloy Electrical Contact Material
volume 02.04
and Connectors
ASTM B598-98(2004)
Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
volume 02.01
ASTM B599-92(2003)e1
Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700)
Plate, Sheet, and Strip
volume 02.04
and Connectors
ASTM B600-91(2002)
Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
volume 02.04
and Connectors
ASTM B601-02
Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
volume 02.01
ASTM B602-88(2005)
Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
volume 02.05
ASTM B603-90(2001)
Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
volume 02.04
and Connectors
ASTM B604-91(2003)e1
Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on
Plastics
volume 02.05
ASTM B605-95a(2004)
Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
volume 02.05
ASTM B606-02
Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and
Aluminum-Alloy Conductors, Steel Reinforced
volume 02.03
ASTM B607-91(2003)
Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
volume 02.05
ASTM B608-02
Standard Specification for Welded Copper-Alloy Pipe
volume 02.01
ASTM B609/B609M-99(2004)
Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical
Purposes
volume 02.03
ASTM B610-00e1
Standard Test Method for Measuring Dimensional Changes of Metal Powder Specimens
volume 02.05
ASTM B611-85(2005)
Standard Test Method for Abrasive Wear Resistance of Cemented Carbides
volume 02.05
ASTM B612-00
Standard Specification for Iron Bronze Sintered Bearings (Oil-Impregnated)
volume 02.05
ASTM B613-76(2000)
Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric
Contacts
volume 02.04
and Connectors
ASTM B614-05
Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
volume 02.04
and Connectors
ASTM B615-79(2000)
Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
volume 02.04
and Connectors
ASTM B616-96(2000)
Standard Specification for Refined Rhodium
volume 02.04
and Connectors
ASTM B617-98(2004)
Standard Specification for Coin Silver Electrical Contact Alloy
volume 02.04
and Connectors
ASTM B618-03
Standard Specification for Aluminum-Alloy Investment Castings
volume 02.02
ASTM B619-05
Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
volume 02.04
and Connectors
ASTM B620-03
Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
volume 02.04
and Connectors
Strona 25
ASTM B621-02
Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
volume 02.04
and Connectors
ASTM B622-04a
Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
volume 02.04
and Connectors
ASTM B624-99(2005)e1
Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
volume 02.03
ASTM B625-05
Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS
R20033 Plate, Sheet, and Strip
volume 02.04
and Connectors
ASTM B626-04
Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
volume 02.04
and Connectors
ASTM B628-98(2004)
Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
volume 02.04
and Connectors
ASTM B629-77(2003)
Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
volume 02.05
ASTM B630-88(2001)
Standard Practice for Preparation of Chromium for Electroplating with Chromium
volume 02.05
ASTM B631-93(2004)
Standard Specification for Silver-Tungsten Electrical Contact Materials
volume 02.04
and Connectors
ASTM B632/B632M-02
Standard Specification for Aluminum-Alloy Rolled Tread Plate
volume 02.02
ASTM B633-98e1
Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
volume 02.05
ASTM B634-88(2004)e1
Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
volume 02.05
ASTM B635-00(2004)e1
Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited
volume 02.05
ASTM B636-84(2001)
Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral
Contractometer
volume 02.05
ASTM B637-03
Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for HighTemperature Service
volume 02.04
and Connectors
ASTM B639-02
Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS
R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
volume 02.04
and Connectors
ASTM B640-00
Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
volume 02.01
ASTM B643-00(2005)
Standard Specification for Copper-Beryllium Alloy Seamless Tube
volume 02.01
ASTM B644-05
Standard Specification for Copper Alloy Addition Agents
volume 02.01
ASTM B645-02
Standard Practice for Plane-Strain Fracture Toughness Testing of Aluminum Alloys
volume 02.02
ASTM B646-06
Standard Practice for Fracture Toughness Testing of Aluminum Alloys
volume 02.02
ASTM B647-84(2000)
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
volume 02.02
ASTM B648-78(2000)
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
volume 02.02
ASTM B649-05
Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS
N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire
volume 02.04
and Connectors
ASTM B650-95(2002)
Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
volume 02.05
ASTM B651-83(2006)
Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel
Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
volume 02.05
ASTM B652/B652M-04
Standard Specification for Niobium-Hafnium Alloy Ingots
volume 02.04
and Connectors
ASTM B653/B653M-02
Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
volume 02.04
and Connectors
ASTM B654/B654M-04
Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
volume 02.04
and Connectors
ASTM B655/B655M-04
Standard Specification for Niobium-Hafnium Alloy Bar, Rod, and Wire
volume 02.04
and Connectors
ASTM B657-05
Guide for Metallographic Identification of Microstructure in Cemented Carbides
volume 02.05
ASTM B658/B658M-05
Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
volume 02.04
and Connectors
ASTM B659-90(2003)
Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
volume 02.05
ASTM B660-02
Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
volume 02.02
ASTM B661-06
Standard Practice for Heat Treatment of Magnesium Alloys
volume 02.02
Strona 26
ASTM B662-94(2000)
Standard Specification for Silver-Molybdenum Electrical Contact Material
volume 02.04
and Connectors
ASTM B663-94(2000)
Standard Specification for Silver-Tungsten Carbide Electrical Contact Material
volume 02.04
and Connectors
ASTM B664-90(2000)
Standard Specification for 80% Silver-20% Graphite Sliding Contact Material
volume 02.04
and Connectors
ASTM B665-03
Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
volume 02.05
ASTM B666/B666M-01
Standard Practice for Identification Marking of Aluminum and Magnesium Products
volume 02.02
ASTM B667-97(2003)e1
Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
volume 02.04
and Connectors
ASTM B668-05
Standard Specification for UNS N08028 Seamless Pipe and Tube
volume 02.04
and Connectors
ASTM B670-02
Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for
High-Temperature Service
volume 02.04
and Connectors
ASTM B671-81(2005)
Standard Specification for Refined Iridium
volume 02.04
and Connectors
ASTM B672-02
Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700)
Bar and Wire
volume 02.04
and Connectors
ASTM B673-05
Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
volume 02.04
and Connectors
ASTM B674-05
Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube
volume 02.04
and Connectors
ASTM B675-02
Standard Specification for UNS N08367 Welded Pipe
volume 02.04
and Connectors
ASTM B676-03
Standard Specification for UNS N08367 Welded Tube
volume 02.04
and Connectors
ASTM B677-05
Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
volume 02.04
and Connectors
ASTM B678-86(2001)
Standard Test Method for Solderability of Metallic-Coated Products
volume 02.05
ASTM B679-98(2004)e1
Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
volume 02.05
ASTM B680-80(2004)
Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
volume 02.05
ASTM B682-01
Standard Specification for Standard Metric Sizes of Electrical Conductors
volume 02.03
ASTM B683-01
Standard Specification for Pure Palladium Electrical Contact Material
volume 02.04
and Connectors
ASTM B684-97(2002)
Standard Specification for Platinum-Iridium Electrical Contact Materials
volume 02.04
and Connectors
ASTM B685-01
Standard Specification for Palladium-Copper Electrical Contact Material
volume 02.04
and Connectors
ASTM B686-03
Standard Specification for Aluminum Alloy Castings, High-Strength
volume 02.02
ASTM B687-99(2005)e1
Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
volume 02.01
ASTM B688-96(2004)
Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate,
Sheet, and Strip
volume 02.04
and Connectors
ASTM B689-97(2003)
Standard Specification for Electroplated Engineering Nickel Coatings
volume 02.05
ASTM B690-02
Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367)
volume 02.04
and Connectors
ASTM B691-02
Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod,
Bar, and Wire
volume 02.04
and Connectors
Strona 27
ASTM B692-90(2000)
Standard Specification for 75% Silver-25% Graphite Sliding Contact Material
volume 02.04
and Connectors
ASTM B693-91(2001)
Standard Specificationfor Silver-Nickel Electrical Contact Materials
volume 02.04
and Connectors
ASTM B694-03
Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel
(CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
volume 02.01
ASTM B695-04
Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
volume 02.05
ASTM B696-00(2004)e1
Standard Specification for Coatings of Cadmium Mechanically Deposited
volume 02.05
ASTM B697-88(2005)
Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic
Coatings
volume 02.05
ASTM B698-02
Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
volume 02.01
ASTM B699-86(2003)
Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
volume 02.05
ASTM B700-97(2002)
Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
volume 02.05
ASTM B701/B701M-06
Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced
(ACSR/SD)
volume 02.03
ASTM B702-93(2004)
Standard Specification for Copper-Tungsten Electrical Contact Material
volume 02.04
and Connectors
ASTM B703-05
Standard Test Method for Apparent Density of Powders Using Arnold Meter
volume 02.05
ASTM B704-03
Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
volume 02.04
and Connectors
ASTM B705-05
Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
volume 02.04
and Connectors
ASTM B706-00(2006)
Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
volume 02.01
ASTM B708-05
Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
volume 02.04
and Connectors
ASTM B709-04
Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip
volume 02.04
and Connectors
ASTM B710-04
Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
volume 02.04
and Connectors
ASTM B711-05
Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR)
(6201)
volume 02.03
ASTM B712-93(1999)
Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact
Materials
volume 02.04
and Connectors
ASTM B715-96(2001)
Standard Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications
volume 02.05
ASTM B717-96(2000)
Standard Specification for Refined Ruthenium
volume 02.04
and Connectors
ASTM B718-00
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Plate, Sheet, and Strip
volume 02.04
and Connectors
ASTM B719-00(2005)
Bar
volume 02.04
and Connectors
ASTM B722-02
volume 02.04
and Connectors
ASTM B723-00(2005)
Welded Pipe
volume 02.04
and Connectors
ASTM B724-00
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, NonCaliper-Type Instrument
volume 02.02
ASTM B725-05
Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS
N04400) Pipe
volume 02.04
and Connectors
ASTM B726-02
Welded Tube
volume 02.04
and Connectors
ASTM B727-04
Standard Practice for Preparation of Plastics Materials for Electroplating
volume 02.05
Strona 28
ASTM B729-05
Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and
Tube
volume 02.04
and Connectors
ASTM B731-96(2001)
Standard Specification for 60% Palladium-40% Silver Electrical Contact Material
volume 02.04
and Connectors
ASTM B733-04
Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
volume 02.05
ASTM B734-97(2003)e1
Standard Specification for Electrodeposited Copper for Engineering Uses
volume 02.05
ASTM B735-05
Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
volume 02.04
and Connectors
ASTM B736-00(2006)
Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
volume 02.02
ASTM B737-05
Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
volume 02.04
and Connectors
ASTM B738-03
Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for
Use as Electrical Conductors
volume 02.03
ASTM B739-03
Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
volume 02.04
and Connectors
ASTM B740-02
Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
volume 02.01
ASTM B742-90(2000)
Standard Specification for Fine Silver Electrical Contact Fabricated Material
volume 02.04
and Connectors
ASTM B743-00
Standard Specification for Seamless Copper Tube in Coils
volume 02.01
ASTM B744/B744M-05
Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
volume 02.02
ASTM B745/B745M-97(2005)
Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
volume 02.02
ASTM B746/B746M-02
Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches,
and Arches
volume 02.02
ASTM B747-02
Standard Specification for Copper-Zirconium Alloy Sheet and Strip
volume 02.01
ASTM B748-90(2001)
Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section
with a Scanning Electron Microscope
volume 02.05
ASTM B749-03
Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
volume 02.04
and Connectors
ASTM B750-03
Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip
Coatings
volume 02.04
and Connectors
ASTM B751-03
Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
volume 02.04
and Connectors
ASTM B752-06
Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
volume 02.04
and Connectors
ASTM B753-01
Standard Specification for Thermostat Component Alloys
volume 02.04
and Connectors
ASTM B754-89(2005)
Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper
Alloy Strip
volume 02.01
ASTM B755-00
Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and
Strip
volume 02.04
and Connectors
ASTM B756-00
Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar
volume 02.04
and Connectors
ASTM B757-00
Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
volume 02.04
and Connectors
ASTM B758-00
Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube
volume 02.04
and Connectors
ASTM B759-00
Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
volume 02.04
and Connectors
ASTM B760-86(1999)
Standard Specification for Tungsten Plate, Sheet, and Foil
volume 02.04
and Connectors
ASTM B761-02e1
Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray
Monitoring of Gravity Sedimentation
volume 02.05
ASTM B762-90(2005)
Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
volume 02.05
Strona 29
ASTM B763-04
Standard Specification for Copper Alloy Sand Castings for Valve Applications
volume 02.01
ASTM B764-04
Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual
Layers in Multilayer Nickel Deposit (STEP Test)
volume 02.05
ASTM B765-03
Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic
Coatings
volume 02.05
ASTM B766-86(2003)
Standard Specification for Electrodeposited Coatings of Cadmium
volume 02.05
ASTM B767-88(2006)
Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by
Gravimetric and Other Chemical Analysis Procedures
volume 02.05
ASTM B768-99(2004)
Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
volume 02.01
ASTM B769-94(2000)
Standard Test Method for Shear Testing of Aluminum Alloys
volume 02.02
ASTM B770-05
Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
volume 02.01
ASTM B771-87(2001)
Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
volume 02.05
ASTM B772-97(2003)
Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and
Nonarcing)
volume 02.04
and Connectors
ASTM B773-96(2002)e1
Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies
volume 02.04
and Connectors
ASTM B774-00(2005)
Standard Specification for Low Melting Point Alloys
volume 02.04
and Connectors
ASTM B775-02
Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
volume 02.04
and Connectors
ASTM B776-01a
Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
volume 02.04
and Connectors
ASTM B777-99
Standard Specification for Tungsten Base, High-Density Metal
volume 02.04
and Connectors
ASTM B778-02
Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors
(AAC/TW)
volume 02.03
ASTM B779-03
Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, SteelReinforced (ACSR/TW)
volume 02.03
ASTM B780-98(2004)
Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy
volume 02.04
and Connectors
ASTM B781-93a(1999)
Standard Guide for Silver-Cadmium Oxide Contact Material
volume 02.04
and Connectors
ASTM B782-00
Standard Specification for Iron Graphite Sintered Bearings (Oil-Impregnated)
volume 02.05
ASTM B783-04
Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts
volume 02.05
ASTM B784-01
Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated
Electrical Cables
volume 02.03
ASTM B786-02a
Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent
Insulation
volume 02.03
ASTM B787/B787M-04
Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent
Insulation
volume 02.03
ASTM B788/B788M-04
Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
volume 02.02
ASTM B789/B789M-99(2005)
Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
volume 02.02
ASTM B790/B790M-00(2006)
Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts,
Storm Sewers, and Other Buried Conduits
volume 02.02
ASTM B792-01(2005)e1
Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
volume 02.04
and Connectors
ASTM B793-03
Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
volume 02.04
and Connectors
ASTM B794-97(2003)
Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using
Electrical Resistance Measurements
volume 02.04
and Connectors
ASTM B795-93(2002)e1
Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in
Powder Forged (P/F) Steel Parts
volume 02.05
ASTM B796-02
Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (P/F)
Applications
volume 02.05
ASTM B797-93(2002)e1
Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide
Networks in Powder Forged (P/F) Steel Parts
volume 02.05
ASTM B798-95(2005)
Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk
Electrography
volume 02.04
and Connectors
Strona 30
ASTM B799-95(2005)
Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
volume 02.04
and Connectors
ASTM B800-05
Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and
Intermediate Tempers
volume 02.03
ASTM B801-99
Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for
Subsequent Covering or Insulation
volume 02.03
ASTM B802/B802M-02
Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum
Conductors, Steel Reinforced (ACSR)
volume 02.03
ASTM B803-02
Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for
Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
volume 02.03
ASTM B804-02
Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
volume 02.04
and Connectors
ASTM B805-02
Standard Specification for Precipitation Hardening Nickel Alloys UNS N07716, N07725, N07773, N07776,
and N09777, Bar and Wire
volume 02.04
and Connectors
ASTM B806-05
Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
volume 02.01
ASTM B807/B807M-06
Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
volume 02.02
ASTM B808-05
Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
volume 02.04
and Connectors
ASTM B809-95(2003)
Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor ("Flowers-of-Sulfur")
volume 02.05
ASTM B810-01a
Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of
Copper Coupons
volume 02.04
and Connectors
ASTM B811-02
Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
volume 02.04
and Connectors
ASTM B812-96(2002)e1
Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections
Involving Aluminum and Intended for Residential Applications
volume 02.04
and Connectors
ASTM B813-00e1
Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
volume 02.01
ASTM B814-02
Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet,
and Strip
volume 02.04
and Connectors
ASTM B815-02
Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
volume 02.04
and Connectors
ASTM B816-00(2004)e1
Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited
volume 02.05
ASTM B817-03
Standard Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components
volume 02.05
ASTM B818-03
Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate,
Sheet and Strip
volume 02.04
and Connectors
ASTM B819-00
Standard Specification for Seamless Copper Tube for Medical Gas Systems
volume 02.01
ASTM B820-04e1
Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
volume 02.01
ASTM B821-02
Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
volume 02.05
ASTM B822-02
Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light
Scattering
volume 02.05
ASTM B823-01
Standard Specification for Materials for Nonferrous Powder Metallurgy (P/M) Structural Parts
volume 02.05
ASTM B824-04
Standard Specification for General Requirements for Copper Alloy Castings
volume 02.01
ASTM B825-02
Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
volume 02.04
and Connectors
ASTM B826-03
Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
volume 02.04
and Connectors
ASTM B827-05
Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
volume 02.04
and Connectors
ASTM B828-02
Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
volume 02.01
ASTM B829-04a
Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
volume 02.04
and Connectors
ASTM B830-97(2003)
Standard Specification for Uniform Test Methods and Frequency
volume 02.03
ASTM B831-05
Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
volume 02.02
ASTM B832-93(2003)
Standard Guide for Electroforming with Nickel and Copper
volume 02.05
Strona 31
ASTM B833-05
Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of
Steel
volume 02.04
and Connectors
ASTM B834-95(2003)
Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum
(UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges,
Fittings, Valves, and Parts
volume 02.04
and Connectors
ASTM B835-04
Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire
Construction
volume 02.03
ASTM B836-00(2005)
Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire
Construction
volume 02.03
ASTM B837-01
Standard Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel
Distribution Systems
volume 02.01
ASTM B839-04
Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles,
Fasteners, and Rod—Inclined Wedge Method
volume 02.05
ASTM B840-99(2004)
Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits
volume 02.05
ASTM B841-99(2004)
Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
volume 02.05
ASTM B842-99(2005)
Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits
volume 02.05
ASTM B843-93(2003)
Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
volume 02.02
ASTM B844-98(2004)
Standard Guide for Silver-Tin Oxide Contact Material
volume 02.04
and Connectors
ASTM B845-97(2003)
Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
volume 02.04
and Connectors
ASTM B846-05
Standard Termninology for Copper and Copper Alloys
volume 02.01
ASTM B848-05
Specification for Powder Forged (P/F) Ferrous Materials
volume 02.05
ASTM B849-02
Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
volume 02.05
ASTM B850-98(2004)
Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
volume 02.05
ASTM B851-04
Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel,
Autocatalytic Nickel, or Chromium Plating, or as Final Finish
volume 02.05
ASTM B852-01
Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of
Sheet Steel
volume 02.04
and Connectors
ASTM B853-02
Standard Specification for Powder Metallurgy (P/M) Boron Stainless Steel Structural Components
volume 02.05
ASTM B854-98(2004)
Standard Guide for Measuring Electrical Contact Intermittences
volume 02.04
and Connectors
ASTM B855-94(1999)e1
Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel
volume 02.05
ASTM B856-03
Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
volume 02.03
ASTM B857-02
Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, CoatedSteel Supported (ACSS/TW)
volume 02.03
ASTM B858-01
Standard Test Method for Ammonia Vapor Test for Determination Susceptibility to Stress Corrosion Cracking
in Copper Alloys
volume 02.01
ASTM B859-03
Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle
Size Analysis
volume 02.05
ASTM B860-05
Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
volume 02.04
and Connectors
ASTM B861-05e1
Standard Specification for Titanium and Titanium Alloy Seamless Pipe
volume 02.04
and Connectors
ASTM B862-05e1
Standard Specification for Titanium and Titanium Alloy Welded Pipe
volume 02.04
and Connectors
ASTM B863-05e1
Standard Specification for Titanium and Titanium Alloy Wire
volume 02.04
and Connectors
ASTM B864/B864M-00
Standard Specification for Corrugated Aluminum Box Culverts
volume 02.02
ASTM B865-04
Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod,
Wire, Forgings, and Forging Stock
volume 02.04
and Connectors
ASTM B866-95(2003)
Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide
Immersion
volume 02.05
ASTM B867-95(2003)
Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
volume 02.05
ASTM B868-96(2002)e3
Standard Practice for Contact Performance Classification of Electrical Connection Systems
volume 02.04
and Connectors
ASTM B869-04
Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
volume 02.03
Strona 32
ASTM B870-02
Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and
C17510)
volume 02.01
ASTM B871-01
Standard Test Method for Tear Testing of Aluminum Alloy Products
volume 02.02
ASTM B872-96(2003)
Standard Specification for Precipitation-Hardening Nickel-Iron-Chromium- Columbium (Nb)-TitaniumAluminum Alloy (UNS N09908) Plate, Sheet, and Strip
volume 02.04
and Connectors
ASTM B873-01
Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329,
and B417
volume 02.05
ASTM B874-96(2003)
Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
volume 02.05
ASTM B875-96(2003)
Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
volume 02.05
ASTM B877-96(2003)
Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the
Phosphomolybdic Acid (PMA) Method
volume 02.05
ASTM B878-97(2003)
Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
volume 02.04
and Connectors
ASTM B879-97(2003)e1
Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
volume 02.05
ASTM B880-03
Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel
Alloys, and Cobalt Alloys
volume 02.04
and Connectors
ASTM B881-05
Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
volume 02.02
ASTM B882-05
Specification for Pre-Patinated Copper for Architectural Applications
volume 02.01
ASTM B883-05
Standard Specification for Metal Injection Molding (MIM) Ferrous Materials
volume 02.05
ASTM B884-05
Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
volume 02.04
and Connectors
ASTM B885-97(2003)
Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
volume 02.04
and Connectors
ASTM B886-03
Standard Test Methods for Determination of Magnetic Saturation (Ms) of Cemented Carbides
volume 02.05
ASTM B887-03
Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
volume 02.05
ASTM B888-06
Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring
Contacts
volume 02.01
ASTM B890-02
Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten
Hardmetals by X-Ray Fluorescence Spectrometry
volume 02.05
ASTM B891-98(2004)
Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat
Exchanger Tubes With Integral Fins
volume 02.04
and Connectors
ASTM B892-03
Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings
volume 02.04
and Connectors
ASTM B893-98(2003)
Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
volume 02.05
ASTM B894-03
Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings
volume 02.04
and Connectors
ASTM B895-05
Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (P/M)
Parts/Specimens by Immersion in a Sodium Chloride Solution
volume 02.05
ASTM B896-99(2005)
Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
volume 02.04
and Connectors
ASTM B897-03
Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo and Block Ingot
volume 02.04
and Connectors
ASTM B898-05
Standard Specification for Reactive and Refractory Metal Clad Plate
volume 02.04
and Connectors
ASTM B899-05
Standard Termninology Relating to Non-ferrous Metals and Alloys
volume 02.04
and Connectors
ASTM B900-04
Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
volume 02.01
ASTM B901-04
Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire
Construction
volume 02.03
ASTM B902-04a
Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft
Using Single Input Wire Construction
volume 02.03
ASTM B903-00(2005)
Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
volume 02.01
ASTM B904-00(2004)
Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference
Shielding
volume 02.05
ASTM B905-00(2005)
Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized
Tape Test
volume 02.05
Strona 33
ASTM B906-02
Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and
Strip
volume 02.04
and Connectors
ASTM B907-05
Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
volume 02.04
and Connectors
ASTM B908-03
Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
volume 02.04
and Connectors
ASTM B909-00
Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
volume 02.02
ASTM B910/B910M-06
Standard Specification for Annealed Copper-Clad Steel Wire
volume 02.03
ASTM B911/B911M-05
Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
volume 02.03
ASTM B912-02
Standard Specification for Passivation of Stainless Steels Using Electropolishing
volume 02.05
ASTM B913-05
Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter
Stranded and Solid Conductors
volume 02.04
and Connectors
ASTM B914-03e2
Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
volume 02.04
and Connectors
ASTM B915-01
Standard Test Method for Measuring the Static Heat Resistance of a Self-Cleaning Oven Coating
volume 02.05
ASTM B916-01
Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
volume 02.05
ASTM B917/B917M-01(2005)
Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
volume 02.02
ASTM B918-01
Standard Practice for Heat Treatment of Wrought Aluminum Alloys
volume 02.02
ASTM B919-01
Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
volume 02.01
ASTM B920-01
Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of
Sodium Hypochlorite Solution
volume 02.04
and Connectors
ASTM B921-02
Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum
Alloys
volume 02.05
ASTM B922-02
Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
volume 02.05
ASTM B923-02
Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
volume 02.05
ASTM B924-02
Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With
Integral Fins
volume 02.04
and Connectors
ASTM B925-03
Standard Practices for Production and Preparation of Powder Metallurgy (P/M) Test Specimens
volume 02.05
ASTM B926-03
Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light
Table
volume 02.02
ASTM B927-03
Standard Specification for Brass Rod, Bar, and Shapes
volume 02.01
ASTM B928/B928M-04a
Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service
volume 02.02
ASTM B929-05
Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
volume 02.01
ASTM B930-03
Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented
Tungsten Carbides (Hardmetals)
volume 02.05
ASTM B931-03
Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder
Metallurgy (P/M) Parts
volume 02.05
ASTM B932-04
Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and
Strip
volume 02.04
and Connectors
ASTM B933-04
Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
volume 02.05
ASTM B934-04a
Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using
Microindentation Hardness Measurements
volume 02.05
ASTM B935-05
Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials
volume 02.05
ASTM B936-04e1
Standard Specification for Copper-Chrome-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
volume 02.01
ASTM B937-04
Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
volume 02.01
ASTM B938-04
Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 and C17510)
volume 02.01
ASTM B939-05
Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings and Structural
Materials
volume 02.05
ASTM B940-05
Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
volume 02.05
ASTM B941-05
Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
volume 02.03
ASTM B942-05
Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped
Wire Terminations
volume 02.04
and Connectors
ASTM B943-05
Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
volume 02.04
and Connectors
ASTM B944-06
Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No.
C17510)
volume 02.01
Strona 34
ASTM B945-06
Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping
Process for Production of T1, T2, T5 and T10-Type Tempers
volume 02.02
ASTM B947-06
Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
volume 02.02
ASTM C4-04e1
Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile
volume 04.05
Chemical-Resistant Nonmetallic Materials;
Vitrified Clay Pipe; Concrete Pipe; FiberReinforced Cement Products; Mortars and
Grouts; Masonry; Precast Concrete
ASTM C5-03
Standard Specification for Quicklime for Structural Purposes
volume 04.01
Cement; Lime; Gypsum
ASTM C11-05
Standard Termninology Relating to Gypsum and Related Building Materials and Systems
volume 04.01
ASTM C12-06
Standard Practice for Installing Vitrified Clay Pipe Lines
volume 04.05
ASTM C14-05a
Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
volume 04.05
ASTM C14M-05a
Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe [Metric]
volume 04.05
ASTM C16-03
Standard Test Method for Load Testing Refractory Shapes at High Temperatures
volume 15.01
Refractories; Activated Carbon, Advanced
Ceramics
ASTM C20-00(2005)
Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk
Density of Burned Refractory Brick and Shapes by Boiling Water
volume 15.01
Ceramics
ASTM C22/C22M-00(2005)e1
Standard Specification for Gypsum
volume 04.01
ASTM C24-01
Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory
Materials
volume 15.01
Ceramics
ASTM C25-06
Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
volume 04.01
ASTM C27-98(2002)
Standard Classification of Fireclay and High-Alumina Refractory Brick
volume 15.01
Ceramics
ASTM C28/C28M-00(2005)
Standard Specification for Gypsum Plasters
volume 04.01
ASTM C29/C29M-97(2003)
Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
volume 04.02
Concrete and Aggregates
ASTM C31/C31M-03a
Standard Practice for Making and Curing Concrete Test Specimens in the Field
volume 04.02
ASTM C32-05
Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)
volume 04.05
ASTM C33-03
Standard Specification for Concrete Aggregates
volume 04.02
ASTM C34-03
Standard Specification for Structural Clay Load-Bearing Wall Tile
volume 04.05
ASTM C35-01(2005)
Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
volume 04.01
ASTM C39/C39M-05
Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
volume 04.02
ASTM C40-04
Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
volume 04.02
ASTM C42/C42M-04
Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
volume 04.02
ASTM C43-05
Standard Terminology of Structural Clay Products
volume 04.05
ASTM C50-00
Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone
Products
volume 04.01
ASTM C51-06
Standard Terminology Relating to Lime and Limestone (as used by the Industry)
volume 04.01
ASTM C55-03
Standard Specification for Concrete Brick
volume 04.05
ASTM C56-05
Standard Specification for Structural Clay Non-Load-Bearing Tile
volume 04.05
ASTM C59/C59M-00(2006)
Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
volume 04.01
ASTM C61/C61M-00(2006)
Standard Specification for Gypsum Keene's Cement
volume 04.01
ASTM C62-05
Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
volume 04.05
ASTM C67-05
Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
volume 04.05
ASTM C70-06
Standard Test Method for Surface Moisture in Fine Aggregate
volume 04.02
ASTM C71-01a
Standard Terminology Relating to Refractories
volume 15.01
Ceramics
ASTM C73-05
Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)
volume 04.05
ASTM C76-05b
Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
volume 04.05
ASTM C76M-05b
Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric]
volume 04.05
ASTM C78-02
Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
volume 04.02
ASTM C87-05
Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
volume 04.02
ASTM C88-05
Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
volume 04.02
Strona 35
ASTM C90-06
Standard Specification for Loadbearing Concrete Masonry Units
volume 04.05
ASTM C91-05
Standard Specification for Masonry Cement
volume 04.01
ASTM C92-95(2005)
Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
volume 15.01
Ceramics
ASTM C94/C94M-05
Standard Specification for Ready-Mixed Concrete
volume 04.02
ASTM C97-02
Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
volume 04.07
Building Seals and Sealants; Fire Standards;
Dimension Stone
ASTM C99-87(2006)
Standard Test Method for Modulus of Rupture of Dimension Stone
volume 04.07
Dimension Stone
ASTM C108-46(2004)
Standard Symbols for Heat Transmission
volume 15.01
Ceramics
ASTM C109/C109M-05
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube
Specimens)
volume 04.01
ASTM C110-06
Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
volume 04.01
ASTM C113-02
Standard Test Method for Reheat Change of Refractory Brick
volume 15.01
Ceramics
ASTM C114-05
Standard Test Methods for Chemical Analysis of Hydraulic Cement
volume 04.01
ASTM C115-96a(2003)
Standard Test Method for Fineness of Portland Cement by the Turbidimeter
volume 04.01
ASTM C117-04
Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
volume 04.02
ASTM C118-05a
Standard Specification for Concrete Pipe for Irrigation or Drainage
volume 04.05
ASTM C118M-05a
Standard Specification for Concrete Pipe for Irrigation or Drainage [Metric]
volume 04.05
ASTM C119-06
Standard Termninology Relating to Dimension Stone
volume 04.07
Dimension Stone
ASTM C120-06e1
Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of
Elasticity)
volume 04.07
Dimension Stone
ASTM C121-06
Standard Test Method for Water Absorption of Slate
volume 04.07
Dimension Stone
ASTM C123-04
Standard Test Method for Lightweight Particles in Aggregate
volume 04.02
ASTM C125-06a
Standard Termninology Relating to Concrete and Concrete Aggregates
volume 04.02
ASTM C126-99(2005)
Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
volume 04.05
ASTM C127-04
Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
volume 04.02
ASTM C128-04a
Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
volume 04.02
ASTM C129-05
Standard Specification for Nonloadbearing Concrete Masonry Units
volume 04.05
ASTM C131-03
Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and
Impact in the Los Angeles Machine
volume 04.02
ASTM C133-97(2003)
Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
volume 15.01
Ceramics
ASTM C134-95(2005)
Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and
Insulating Firebrick
volume 15.01
Ceramics
ASTM C135-96(2003)
Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
volume 15.01
Ceramics
ASTM C136-06
Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
volume 04.02
ASTM C138/C138M-01a
Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
volume 04.02
ASTM C139-05
Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
volume 04.05
ASTM C140-05a
Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
volume 04.05
ASTM C141-97(2005)
Standard Specification for Hydraulic Hydrated Lime for Structural Purposes
volume 04.01
ASTM C142-97(2004)
Standard Test Method for Clay Lumps and Friable Particles in Aggregates
volume 04.02
ASTM C143/C143M-05a
Standard Test Method for Slump of Hydraulic Cement Concrete
volume 04.02
ASTM C144-04
Standard Specification for Aggregate for Masonry Mortar
volume 04.05
ASTM C146-94a(2004)
Standard Test Methods for Chemical Analysis of Glass Sand
volume 15.02
Glass; Ceramic Whitewares
ASTM C147-86(2005)
Standard Test Methods for Internal Pressure Strength of Glass Containers
volume 15.02
ASTM C148-00
Standard Test Methods for Polariscopic Examination of Glass Containers
volume 15.02
ASTM C149-86(2005)
Standard Test Method for Thermal Shock Resistance of Glass Containers
volume 15.02
ASTM C150-05
Standard Specification for Portland Cement
volume 04.01
ASTM C151-05
Standard Test Method for Autoclave Expansion of Hydraulic Cement
volume 04.01
ASTM C155-97(2002)
Standard Classification of Insulating Firebrick
volume 15.01
Ceramics
ASTM C156-05
Standard Test Method for Water Retention by Concrete Curing Materials
volume 04.02
ASTM C157/C157M-06
Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
volume 04.02
ASTM C158-02
Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
volume 15.02
Strona 36
ASTM C159-98
Standard Specification for Vitrified Clay Filter Blocks
volume 04.05
ASTM C162-05
Standard Terminology of Glass and Glass Products
volume 15.02
ASTM C163-05
Standard Practice for Mixing Thermal Insulating Cement Samples
volume 04.06
Thermal Insulation; Environmental Acoustics
ASTM C165-05
Standard Test Method for Measuring Compressive Properties of Thermal Insulations
volume 04.06
ASTM C166-05
Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating
Cement
volume 04.06
ASTM C167-98(2003)
Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
volume 04.06
ASTM C168-05a
Standard Terminology Relating to Thermal Insulation
volume 04.06
ASTM C169-92(2005)
Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
volume 15.02
ASTM C170-90(1999)
Standard Test Method for Compressive Strength of Dimension Stone
volume 04.07
Dimension Stone
ASTM C171-03
Standard Specification for Sheet Materials for Curing Concrete
volume 04.02
ASTM C172-04
Standard Practice for Sampling Freshly Mixed Concrete
volume 04.02
ASTM C173/C173M-01e1
Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
volume 04.02
ASTM C174/C174M-06
Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
volume 04.02
ASTM C177-04
Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by
Means of the Guarded-Hot-Plate Apparatus
volume 04.06
ASTM C179-04
Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix
Specimens
volume 15.01
Ceramics
ASTM C181-03
Standard Test Method for Workability Index of Fireclay and High-Alumina Plastic Refractories
volume 15.01
Ceramics
ASTM C182-88(2004)
Standard Test Method for Thermal Conductivity of Insulating Firebrick
volume 15.01
Ceramics
ASTM C183-02
Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
volume 04.01
ASTM C185-02
Standard Test Method for Air Content of Hydraulic Cement Mortar
volume 04.01
ASTM C186-05
Standard Test Method for Heat of Hydration of Hydraulic Cement
volume 04.01
ASTM C187-04
Standard Test Method for Normal Consistency of Hydraulic Cement
volume 04.01
ASTM C188-95(2003)
Standard Test Method for Density of Hydraulic Cement
volume 04.01
ASTM C191-04b
Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle
volume 04.01
ASTM C192/C192M-06
Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
volume 04.02
ASTM C195-00
Standard Specification for Mineral Fiber Thermal Insulating Cement
volume 04.06
ASTM C196-00(2005)
Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
volume 04.06
ASTM C198-02
Standard Test Method for Cold Bonding Strength of Refractory Mortar
volume 15.01
Ceramics
ASTM C199-84(2005)
Standard Test Method for Pier Test for Refractory Mortars
volume 15.01
Ceramics
ASTM C201-93(2004)
Standard Test Method for Thermal Conductivity of Refractories
volume 15.01
Ceramics
ASTM C202-93(2004)
Standard Test Method for Thermal Conductivity of Refractory Brick
volume 15.01
Ceramics
ASTM C203-05a
Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
volume 04.06
ASTM C204-05
Standard Test Method for Fineness of Hydraulic Cement by Air Permeability Apparatus
volume 04.01
ASTM C206-03
Standard Specification for Finishing Hydrated Lime
volume 04.01
ASTM C207-06
Standard Specification for Hydrated Lime for Masonry Purposes
volume 04.01
ASTM C208-95(2001)
Standard Specification for Cellulosic Fiber Insulating Board
volume 04.06
ASTM C209-98
Standard Test Methods for Cellulosic Fiber Insulating Board
volume 04.06
ASTM C210-95(2005)
Standard Test Method for Reheat Change of Insulating Firebrick
volume 15.01
Ceramics
ASTM C212-00
Standard Specification for Structural Clay Facing Tile
volume 04.05
ASTM C215-02
Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete
Specimens
volume 04.02
ASTM C216-05a
Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
volume 04.05
ASTM C217-94(2004)
Standard Test Method for Weather Resistance of Slate
volume 04.07
Dimension Stone
ASTM C219-03e1
Standard Termninology Relating to Hydraulic Cement
volume 04.01
ASTM C220-91(2004)e1
Standard Specification for Flat Asbestos-Cement Sheets
volume 04.05
ASTM C221-98(2003)e1
Standard Specification for Corrugated Asbestos-Cement Sheets
volume 04.05
ASTM C222-97(2003)e1
Standard Specification for Asbestos-Cement Roofing Shingles
volume 04.05
ASTM C223-98(2003)e1
Standard Specification for Asbestos-Cement Siding
volume 04.05
ASTM C224-78(2004)e1
Standard Practice for Sampling Glass Containers
volume 15.02
Strona 37
ASTM C225-85(2004)
Standard Test Methods for Resistance of Glass Containers to Chemical Attack
volume 15.02
ASTM C226-02
Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic
Cement
volume 04.01
ASTM C227-03
Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar
Method)
volume 04.02
ASTM C230/C230M-03
Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
volume 04.01
ASTM C231-04
Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
volume 04.02
ASTM C232-04
Standard Test Methods for Bleeding of Concrete
volume 04.02
ASTM C233-04
Standard Test Method for Air-Entraining Admixtures for Concrete
volume 04.02
ASTM C240-97(2003)
Standard Test Methods of Testing Cellular Glass Insulation Block
volume 04.06
ASTM C241-90(2005)
Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
volume 04.07
Dimension Stone
ASTM C242-01
Standard Terminology of Ceramic Whitewares and Related Products
volume 15.02
ASTM C260-01
Standard Specification for Air-Entraining Admixtures for Concrete
volume 04.02
ASTM C265-03a
Standard Test Method for Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar
volume 04.01
ASTM C266-04
Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
volume 04.01
ASTM C267-01
Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer
Concretes
volume 04.05
ASTM C270-06
Standard Specification for Mortar for Unit Masonry
volume 04.05
ASTM C271/C271M-05
Standard Test Method for Density of Sandwich Core Materials
volume 15.03
Space Simulation; Aerospace and Aircraft;
Composite Materials
ASTM C272-01
Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions
volume 15.03
Composite Materials
ASTM C273-00e1
Standard Test Method for Shear Properties of Sandwich Core Materials
volume 15.03
Composite Materials
ASTM C274-99
Standard Terminology of Structural Sandwich Constructions
volume 15.03
Composite Materials
ASTM C279-88(2001)
Standard Specification for Chemical-Resistant Masonry Units
volume 04.05
ASTM C282-99(2005)
Standard Test Method for Acid Resistance of Porcelain Enamels (Citric Acid Spot Test)
volume 02.05
ASTM C283-97(2002)
Standard Test Method for Resistance of Porcelain Enameled Utensils to Boiling Acid
volume 02.05
ASTM C285-88(2005)
Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
volume 02.05
ASTM C286-99(2004)
Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems
volume 02.05
ASTM C287-98(2003)
Standard Specification for Chemical-Resistant Sulfur Mortar
volume 04.05
ASTM C288-87(2002)
Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
volume 15.01
Ceramics
ASTM C289-03
Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
volume 04.02
ASTM C293-02
Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
volume 04.02
ASTM C294-05
Standard Descriptive Nomenclature for Constituents of Concrete Aggregates
volume 04.02
ASTM C295-03
Standard Guide for Petrographic Examination of Aggregates for Concrete
volume 04.02
ASTM C296-00(2004)e1
Standard Specification for Asbestos-Cement Pressure Pipe
volume 04.05
ASTM C297/C297M-04
Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
volume 15.03
Composite Materials
ASTM C301-04
Standard Test Methods for Vitrified Clay Pipe
volume 04.05
ASTM C302-95(2001)e1
Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
volume 04.06
ASTM C303-02
Standard Test Method for Dimensions and Density of Preformed Block and Broad-Type Thermal Insulation
volume 04.06
ASTM C305-99e1
Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
volume 04.01
ASTM C307-03
Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
volume 04.05
ASTM C308-00(2005)
Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of ChemicalResistant Resin Mortars
volume 04.05
ASTM C309-06
Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
volume 04.02
ASTM C311-05
Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement
Concrete
volume 04.02
ASTM C315-02
Standard Specification for Clay Flue Linings
volume 04.05
ASTM C317/C317M-00(2005)
Standard Specification for Gypsum Concrete
volume 04.01
ASTM C318/C318M-00(2005)
Standard Specification for Gypsum Formboard
volume 04.01
ASTM C321-00(2005)
Standard Test Method for Bond Strength of Chemical-Resistant Mortars
volume 04.05
ASTM C322-03
Standard Practice for Sampling Ceramic Whiteware Clays
volume 15.02
Strona 38
ASTM C323-56(2006)
Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays
volume 15.02
ASTM C324-01e1
Standard Test Method for Free Moisture in Ceramic Whiteware Clays
volume 15.02
ASTM C325-81(1997)e1
Standard Test Method for Wet Sieve Analysis of Ceramic Whiteware Clays
volume 15.02
ASTM C326-03
Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
volume 15.02
ASTM C329-88(2006)
Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
volume 15.02
ASTM C330-05
Standard Specification for Lightweight Aggregates for Structural Concrete
volume 04.02
ASTM C331-05
Standard Specification for Lightweight Aggregates for Concrete Masonry Units
volume 04.02
ASTM C332-99
Standard Specification for Lightweight Aggregates for Insulating Concrete
volume 04.02
ASTM C335-05ae1
Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
volume 04.06
ASTM C336-71(2005)
Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
volume 15.02
ASTM C338-93(2003)
Standard Test Method for Softening Point of Glass
volume 15.02
ASTM C341/C341M-06
Standard Practice for Length Change of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and
Concrete
volume 04.02
ASTM C346-87(2004)e1
Standard Test Method for 45-deg Specular Gloss of Ceramic Materials
volume 02.05
ASTM C348-02
Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
volume 04.01
ASTM C349-02
Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms
Broken in Flexure)
volume 04.01
ASTM C351-92b(1999)
Standard Test Method for Mean Specific Heat of Thermal Insulation
volume 04.06
ASTM C356-03
Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to
Soaking Heat
volume 04.06
ASTM C357-94(2002)e1
Standard Test Method for Bulk Density of Granular Refractory Materials
volume 15.01
Ceramics
ASTM C359-05
Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)
volume 04.01
ASTM C361-05e1
Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
volume 04.05
ASTM C361M-05
Standard Specification for Reinforced Concrete Low-Head Pressure Pipe [Metric]
volume 04.05
ASTM C363-00
Standard Test Method for Delamination Strength of Honeycomb Core Materials
volume 15.03
Composite Materials
ASTM C364-99
Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
volume 15.03
Composite Materials
ASTM C365/C365M-05
Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
volume 15.03
Composite Materials
ASTM C366/C366M-05
Standard Test Methods for Measurement of Thickness of Sandwich Cores
volume 15.03
Composite Materials
ASTM C367-05
Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In
Ceiling Panels
volume 04.06
ASTM C368-88(2006)
Standard Test Method for Impact Resistance of Ceramic Tableware
volume 15.02
ASTM C370-88(2006)
Standard Test Method for Moisture Expansion of Fired Whiteware Products
volume 15.02
ASTM C371-89(2003)
Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
volume 15.02
ASTM C372-94(2001)
Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic
Whiteware Products by the Dilatometer Method
volume 15.02
ASTM C373-88(2006)
Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity
of Fired Whiteware Products
volume 15.02
ASTM C374-70(2004)e1
Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
volume 02.05
ASTM C375-58(2006)
Standard Classification of Water Used in Milling of Porcelain Enamel
volume 02.05
ASTM C384-04
Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
volume 04.06
ASTM C385-58(2004)e1
Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils
volume 02.05
ASTM C386-93(2003)
Standard Practice for Use of Chemical-Resistant Sulfur Mortar
volume 04.05
ASTM C387/C387M-06a
Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
volume 04.02
ASTM C390-03
Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
volume 04.06
ASTM C393-00
Standard Test Method for Flexural Properties of Sandwich Constructions
volume 15.03
Composite Materials
ASTM C394-00
Standard Test Method for Shear Fatigue of Sandwich Core Materials
volume 15.03
Composite Materials
ASTM C395-01
Standard Specification for Chemical-Resistant Resin Mortars
volume 04.05
ASTM C397-00(2005)
Standard Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
volume 04.05
ASTM C398-98(2003)
Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry
volume 04.05
ASTM C399-98(2003)
Standard Practice for Use of Chemical-Resistant Resin Mortars
volume 04.05
ASTM C400-98
Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
volume 04.01
ASTM C401-91(2005)
Standard Classification of Alumina and Alumina-Silicate Castable Refractories
volume 15.01
Ceramics
Strona 39
ASTM C403/C403M-05
Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
volume 04.02
ASTM C404-04
Standard Specification for Aggregates for Masonry Grout
volume 04.05
ASTM C406-06
Standard Specification for Roofing Slate
volume 04.07
Dimension Stone
ASTM C408-88(2006)
Standard Test Method for Thermal Conductivity of Whiteware Ceramics
volume 15.02
ASTM C410-60(2003)
Standard Specification for Industrial Floor Brick
volume 04.05
ASTM C411-05
Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
volume 04.06
ASTM C412-05a
Standard Specification for Concrete Drain Tile
volume 04.05
ASTM C412M-05a
Standard Specification for Concrete Drain Tile [Metric]
volume 04.05
ASTM C413-01
Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, and Monolithic Surfacings and
Polymer Concretes
volume 04.05
ASTM C414-03
Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting
Chemical-Resistant Silicate and Silica Mortars
volume 04.05
ASTM C416-97(2002)
Standard Classification of Silica Refractory Brick
volume 15.01
Ceramics
ASTM C417-05
Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
volume 15.01
Ceramics
ASTM C418-05
Standard Test Method for Abrasion Resistance of Concrete by Sandblasting
volume 04.02
ASTM C419-94(2000)
Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
volume 04.06
ASTM C421-05
Standard Test Method for Tumbling Friability of Preformed Block-Type Thermal Insulation
volume 04.06
ASTM C423-02ae1
Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room
Method
volume 04.06
ASTM C424-93(2006)
Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
volume 15.02
ASTM C425-04
Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
volume 04.05
ASTM C426-05
Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
volume 04.05
ASTM C428-05
Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe
volume 04.05
ASTM C429-01
Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
volume 15.02
ASTM C430-96(2003)
Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
volume 04.01
ASTM C441-05
Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive
Expansion of Concrete Due to the Alkali-Silica Reaction
volume 04.02
ASTM C443-05a
Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
volume 04.05
ASTM C443M-05a
Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets [Metric]
volume 04.05
ASTM C444-03
Standard Specification for Perforated Concrete Pipe
volume 04.05
ASTM C444M-03
Standard Specification for Perforated Concrete Pipe [Metric]
volume 04.05
ASTM C447-03
Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
volume 04.06
ASTM C448-88(1999)
Standard Test Methods for Abrasion Resistance of Porcelain Enamels
volume 02.05
ASTM C449/C449M-00
Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
volume 04.06
ASTM C450-02
Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
volume 04.06
ASTM C451-05
Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
volume 04.01
ASTM C452-06
Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
volume 04.01
ASTM C454-83(2002)
Standard Practice for Disintegration of Carbon Refractories by Alkali
volume 15.01
Ceramics
ASTM C455-97(1999)
Standard Classification of Chrome Brick, Chrome-Magnesia Brick, Magnesia-Chrome Brick, and Magnesia
Brick
volume 15.01
Ceramics
ASTM C456-93(2003)
Standard Test Method for Hydration Resistance of Basic Bricks and Shapes
volume 15.01
Ceramics
ASTM C457-06
Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened
Concrete
volume 04.02
ASTM C458-98(2002)e1
Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
volume 04.05
ASTM C459-97(2002)e1
Standard Test Methods for Asbestos-Cement Flat Products
volume 04.05
Strona 40
ASTM C461-81(2003)
Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
volume 04.06
ASTM C465-99(2005)
Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
volume 04.01
ASTM C466-03
Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars
volume 04.05
ASTM C467-97(2002)
Standard Classification of Mullite Refractories
volume 15.01
Ceramics
ASTM C469-02e1
Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
volume 04.02
ASTM C470/C470M-02a
Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
volume 04.02
ASTM C471M-01
Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products [Metric]
volume 04.01
ASTM C472-99(2004)
Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
volume 04.01
ASTM C473-06
Standard Test Methods for Physical Testing of Gypsum Panel Products
volume 04.01
ASTM C474-05
Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
volume 04.01
ASTM C475/C475M-02
Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
volume 04.01
ASTM C476-02
Standard Specification for Grout for Masonry
volume 04.05
ASTM C478-06a
Standard Specification for Precast Reinforced Concrete Manhole Sections
volume 04.05
ASTM C478M-06a
Standard Specification for Precast Reinforced Concrete Manhole Sections [Metric]
volume 04.05
ASTM C479-04
Standard Specification for Vitrified Clay Liner Plates
volume 04.05
ASTM C480-99(2005)
Standard Test Method for Flexure Creep of Sandwich Constructions
volume 15.03
Composite Materials
ASTM C481-99(2005)
Standard Test Method for Laboratory Aging of Sandwich Constructions
volume 15.03
Composite Materials
ASTM C482-02
Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement
volume 15.02
ASTM C484-99(2003)
Standard Test Method for Thermal Shock Resistance of Glazed Ceramic Tile
volume 15.02
ASTM C485-83(2003)
Standard Test Method for Measuring Warpage of Ceramic Tile
volume 15.02
ASTM C488-05
Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
volume 04.06
ASTM C490-04
Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste,
Mortar, and Concrete
volume 04.01
ASTM C490-04
Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste,
Mortar, and Concrete
volume 04.02
ASTM C492-92(2003)
Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
volume 15.01
Ceramics
ASTM C494/C494M-05a
Standard Specification for Chemical Admixtures for Concrete
volume 04.02
ASTM C495-99a
Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
volume 04.02
ASTM C496/C496M-04
Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
volume 04.02
ASTM C497-05
Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
volume 04.05
ASTM C497M-05
Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric]
volume 04.05
ASTM C499-78(2003)
Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile
volume 15.02
ASTM C500-98(2002)e1
Standard Test Methods for Asbestos-Cement Pipe
volume 04.05
ASTM C501-84(2002)
Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
volume 15.02
ASTM C502-04
Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile
volume 15.02
ASTM C503-05
Standard Specification for Marble Dimension Stone
volume 04.07
Dimension Stone
ASTM C505-05a
Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
volume 04.05
ASTM C505M-05a
Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
volume 04.05
ASTM C506-05a
Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
volume 04.05
ASTM C506M-05a
Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe [Metric]
volume 04.05
ASTM C507-05a
Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
volume 04.05
ASTM C507M-05b
Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe [Metric]
volume 04.05
ASTM C508-00(2004)
Standard Specification for Asbestos-Cement Underdrain Pipe
volume 04.05
Strona 41
ASTM C509-06
Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
volume 04.07
Dimension Stone
ASTM C510-05a
Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
volume 04.07
Dimension Stone
ASTM C511-05
Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in
the Testing of Hydraulic Cements and Concretes
volume 04.01
ASTM C511-05
Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in
the Testing of Hydraulic Cements and Concretes
volume 04.02
ASTM C512-02
Standard Test Method for Creep of Concrete in Compression
volume 04.02
ASTM C514-04
Standard Specification for Nails for the Application of Gypsum Board
volume 04.01
ASTM C515-95(2001)
Standard Specification for Chemical-Resistant Ceramic Tower Packings
volume 04.05
ASTM C516-02
Standard Specification for Vermiculite Loose Fill Thermal Insulation
volume 04.06
ASTM C518-04
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter
Apparatus
volume 04.06
ASTM C520-04
Standard Test Methods for Density of Granular Loose Fill Insulations
volume 04.06
ASTM C522-03
Standard Test Method for Airflow Resistance of Acoustical Materials
volume 04.06
ASTM C530-99(2005)
Standard Specification for Structural Clay Nonloadbearing Screen Tile
volume 04.05
ASTM C531-00(2005)
Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant
Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
volume 04.05
ASTM C533-04
Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation
volume 04.06
ASTM C534-05
Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular
Form
volume 04.06
ASTM C535-03e1
Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and
Impact in the Los Angeles Machine
volume 04.02
ASTM C536-83(2004)e1
Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
volume 02.05
ASTM C537-87(2004)e1
Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High
Voltage
volume 02.05
ASTM C538-83(2004)e1
Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels
volume 02.05
ASTM C539-84(2006)
Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic
Whiteware Materials by Interferometric Method
volume 02.05
ASTM C541-98(2002)e1
Standard Specification for Linings for Asbestos-Cement Pipe
volume 04.05
ASTM C542-05
Standard Specification for Lock-Strip Gaskets
volume 04.07
Dimension Stone
ASTM C544-03
Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain
volume 15.01
Ceramics
ASTM C545-97(2002)
Standard Classification of Zircon Refractories
volume 15.01
Ceramics
ASTM C547-06
Standard Specification for Mineral Fiber Pipe Insulation
volume 04.06
ASTM C549-06
Standard Specification for Perlite Loose Fill Insulation
volume 04.06
ASTM C550-03
Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
volume 04.06
ASTM C551-98(2003)e1
Standard Specification for Asbestos-Cement Fiberboard Insulating Panels
volume 04.05
ASTM C552-03
Standard Specification for Cellular Glass Thermal Insulation
volume 04.06
ASTM C553-02
Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial
Applications
volume 04.06
ASTM C554-93(2006)
Standard Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock
Method
volume 15.02
ASTM C557-03e1
Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
volume 15.06
Adhesives
ASTM C559-90(2005)
Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite
Articles
volume 05.05
Test Methods for Rating Motor, Diesel, and
Aviation Fuels; Catalysts; Manufactured Carbon
and Graphite Products
ASTM C560-88(2005)e1
Standard Test Methods for Chemical Analysis of Graphite
volume 05.05
ASTM C561-91(2005)
Standard Test Method for Ash in a Graphite Sample
volume 05.05
ASTM C562-91(2005)
Standard Test Method for Moisture in a Graphite Sample
volume 05.05
ASTM C563-04
Standard Test Method for Optimum SO3in Hydraulic Cement Using 24-h Compressive Strength
volume 04.01
ASTM C564-03a
Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
volume 01.02
ASTM C565-93(2005)
Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
volume 05.05
ASTM C566-97(2004)
Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
volume 04.02
ASTM C567-05a
Standard Test Method for Determining Density of Structural Lightweight Concrete
volume 04.02
ASTM C568-03
Standard Specification for Limestone Dimension Stone
volume 04.07
Dimension Stone
ASTM C577-99
Standard Test Method for Permeability of Refractories
volume 15.01
Ceramics
Strona 42
ASTM C578-06
Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
volume 04.06
ASTM C579-01
Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic
Surfacings and Polymer Concretes
volume 04.05
ASTM C580-02
Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts,
Monolithic Surfacings, and Polymer Concretes
volume 04.05
ASTM C581-03
Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-FiberReinforced Structures Intended for Liquid Service
volume 08.04
Plastic Pipe and Building Products
ASTM C582-02
Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for CorrosionResistant Equipment
volume 08.04
ASTM C583-05
Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
volume 15.01
Ceramics
ASTM C584-81(2006)
Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products
volume 15.02
ASTM C585-90(2004)
Standard Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and
Tubing (NPS System)
volume 04.06
ASTM C586-05
Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (RockCylinder Method)
volume 04.02
ASTM C587-04
Standard Specification for Gypsum Veneer Plaster
volume 04.01
ASTM C591-05
Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
volume 04.06
ASTM C592-04
Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh
Covered) (Industrial Type)
volume 04.06
ASTM C593-05
Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
volume 04.01
ASTM C595-05
Standard Specification for Blended Hydraulic Cements
volume 04.01
ASTM C596-01
Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
volume 04.01
ASTM C597-02
Standard Test Method for Pulse Velocity Through Concrete
volume 04.02
ASTM C598-93(2003)
Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
volume 15.02
ASTM C600-85(2005)
Standard Test Method of Thermal Shock Test on Glass Pipe
volume 15.02
ASTM C601-85(2005)
Standard Test Method for Pressure Test on Glass Pipe
volume 15.02
ASTM C602-95a(2001)
Standard Specification for Agricultural Liming Materials
volume 04.01
ASTM C603-04
Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
volume 04.07
Dimension Stone
ASTM C604-02
Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
volume 15.01
Ceramics
ASTM C607-88(2005)
Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
volume 15.01
Ceramics
ASTM C609-90(2000)
Standard Test Method for Measurement of Small Color Differences Between Ceramic Wall or Floor Tile
volume 15.02
ASTM C610-05
Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
volume 04.06
ASTM C611-98(2005)e1
Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room
Temperature
volume 05.05
ASTM C612-04
Standard Specification for Mineral Fiber Block and Board Thermal Insulation
volume 04.06
C613/C613MASTM
97(2003)e1
Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
volume 15.03
Composite Materials
ASTM C614-74(2005)
Standard Test Method for Alkali Resistance of Porcelain Enamels
volume 02.05
ASTM C615-03
Standard Specification for Granite Dimension Stone
volume 04.07
Dimension Stone
ASTM C616-03
Standard Specification for Quartz-Based Dimension Stone
volume 04.07
Dimension Stone
ASTM C617-98(2003)
Standard Practice for Capping Cylindrical Concrete Specimens
volume 04.02
ASTM C618-05
Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
volume 04.02
ASTM C621-84(2001)
Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
volume 15.01
Ceramics
ASTM C623-92(2005)
Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and GlassCeramics by Resonance
volume 15.02
ASTM C625-95(2005)
Standard Practice for Reporting Irradiation Results on Graphite
volume 05.05
ASTM C627-93(1999)
Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor
Tester
volume 15.02
ASTM C629-03
Standard Specification for Slate Dimension Stone
volume 04.07
Dimension Stone
ASTM C631-95a(2004)
Standard Specification for Bonding Compounds for Interior Gypsum Plastering
volume 04.01
ASTM C632-88(2006)
Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling
volume 02.05
ASTM C633-01
Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
volume 02.05
ASTM C634-02
Standard Terminology Relating to Environmental Acoustics
volume 04.06
ASTM C635-04
Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for
Acoustical Tile and Lay-in Panel Ceilings
volume 04.06
ASTM C636/C636M-06
Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
volume 04.06
ASTM C637-98a(2003)
Standard Specification for Aggregates for Radiation-Shielding Concrete
volume 04.02
ASTM C638-92(2002)
Standard Descriptive Nonmenclature of Constituents of Aggregates for Radiation-Shielding Concrete
volume 04.02
ASTM C639-01
Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
volume 04.07
Dimension Stone
ASTM C641-98e1
Standard Test Method for Staining Materials in Lightweight Concrete Aggregates
volume 04.02
Strona 43
ASTM C642-06
Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
volume 04.02
ASTM C645-06
Standard Specification for Nonstructural Steel Framing Members
volume 04.01
ASTM C647-95(2000)
Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
volume 04.06
ASTM C648-04
Standard Test Method for Breaking Strength of Ceramic Tile
volume 15.02
ASTM C650-04
Standard Test Method for Resistance of Ceramic Tile to Chemical Substances
volume 15.02
ASTM C651-91(2005)e1
Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point
Loading at Room Temperature
volume 05.05
ASTM C652-05a
Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
volume 04.05
ASTM C653-97(2002)
Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber
Insulation
volume 04.06
ASTM C654-05a
Standard Specification for Porous Concrete Pipe
volume 04.05
ASTM C654M-05a
Standard Specification for Porous Concrete Pipe [Metric]
volume 04.05
ASTM C655-04e1
Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
volume 04.05
ASTM C655M-04e1
Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe [Metric]
volume 04.05
ASTM C656-94a(2001)
Standard Specification for Structural Insulating Board, Calcium Silicate
volume 04.06
ASTM C657-93(2003)
Standard Test Method for D-C Volume Resistively of Glass
volume 15.02
ASTM C658-98(2003)
Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile
volume 04.05
ASTM C659-90(2003)e1
Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels
volume 04.05
ASTM C660-81(2005)
Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling
volume 02.05
ASTM C661-06
Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
volume 04.07
Dimension Stone
ASTM C662-70(2005)
Standard Specification for Impervious Graphite Pipe and Threading
volume 05.05
ASTM C663-98(2003)e2
Standard Specification for Asbestos-Cement Storm Drain Pipe
volume 04.05
ASTM C664-87(2005)
Standard Test Methods for Thickness of Diffusion Coating
volume 02.05
ASTM C665-06
Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and
Manufactured Housing
volume 04.06
ASTM C666/C666M-03
Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
volume 04.02
ASTM C667-01
Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at
Temperatures above Ambient Air
volume 04.06
ASTM C668-98(2003)e2
Standard Specification for Asbestos-Cement Transmission Pipe
volume 04.05
ASTM C670-03
Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
volume 04.02
ASTM C672/C672M-03
Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
volume 04.02
ASTM C673-97(2003)
Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
volume 15.01
Ceramics
ASTM C674-88(2006)
Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
volume 15.02
ASTM C675-91(2001)
Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass
Containers
volume 15.02
ASTM C676-04
Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
volume 15.02
ASTM C679-03
Standard Test Method for Tack-Free Time of Elastomeric Sealants
volume 04.07
Dimension Stone
ASTM C680-04e3
Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat,
Cylindrical, and Spherical Systems by Use of Computer Programs
volume 04.06
ASTM C681-03
Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
volume 04.07
Dimension Stone
ASTM C684-99(2003)
Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens
volume 04.02
ASTM C685/C685M-01
Standard Specification for Concrete Made By Volumetric Batching and Continuous Mixing
volume 04.02
ASTM C686-90(2001)
Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
volume 04.06
ASTM C687-05
Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
volume 04.06
ASTM C688-00(2005)
Standard Specification for Functional Additions for Use in Hydraulic Cements
volume 04.01
ASTM C689-03a
Standard Test Method for Modulus of Rupture of Unfired Clays
volume 15.02
ASTM C690-03
Standard Test Method for Particle Size Distribution of Alumina or Quartz by Electric Sensing Zone Technique
volume 15.02
ASTM C692-06
Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion
Cracking Tendency of Austenitic Stainless Steel
volume 04.06
ASTM C693-93(2003)
Standard Test Method for Density of Glass by Buoyancy
volume 15.02
Strona 44
ASTM C694-90a(2006)
Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid
Solution
volume 02.05
ASTM C695-91(2005)
Standard Test Method for Compressive Strength of Carbon and Graphite
volume 05.05
ASTM C696-99(2005)
Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade
Uranium Dioxide Powders and Pellets
volume 12.01
Nuclear Energy (I)
ASTM C697-04
Plutonium Dioxide Powders and Pellets
volume 12.01
Nuclear Energy (I)
ASTM C698-04
Mixed Oxides ((U, Pu)O2)
volume 12.01
Nuclear Energy (I)
ASTM C700-05
Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
volume 04.05
ASTM C702-98(2003)
Standard Practice for Reducing Samples of Aggregate to Testing Size
volume 04.02
ASTM C703-72(2006)
Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum
volume 02.05
ASTM C704-01
Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
volume 15.01
Ceramics
ASTM C706-02
Standard Specification for Limestone for Animal Feed Use
volume 04.01
ASTM C709-03a
Standard Terminology Relating to Manufactured Carbon and Graphite
volume 05.05
ASTM C711-03
Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, SolventRelease Type Sealants
volume 04.07
Dimension Stone
ASTM C712-03
Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
volume 04.07
Dimension Stone
ASTM C714-05
Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
volume 05.05
ASTM C715-90(2006)
Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
volume 02.05
ASTM C716-06
Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
volume 04.07
Dimension Stone
ASTM C717-06
Standard Termninology of Building Seals and Sealants
volume 04.07
Dimension Stone
ASTM C719-93(2005)
Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement
(Hockman Cycle)
volume 04.07
Dimension Stone
ASTM C722-04
Standard Specification for Chemical-Resistant Monolithic Floor Surfacings
volume 04.05
ASTM C723-98(2003)
Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile
volume 04.05
ASTM C724-91(2005)
Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
volume 15.02
ASTM C725-90(2003)e1
Standard Specification for Semidense Mineral Fiber Siding
volume 04.05
ASTM C726-05
Standard Specification for Mineral Fiber Roof Insulation Board
volume 04.06
ASTM C727-01
Standard Practice for Installation and Use of Reflective Insulation in Building Constructions
volume 04.06
ASTM C728-05
Standard Specification for Perlite Thermal Insulation Board
volume 04.06
ASTM C729-05
Standard Test Method for Density of Glass by the Sink-Float Comparator
volume 15.02
ASTM C730-98(2003)
Standard Test Method for Knoop Indentation Hardness of Glass
volume 15.02
ASTM C731-00(2006)
Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
volume 04.07
Dimension Stone
ASTM C732-01
Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
volume 04.07
Dimension Stone
ASTM C734-01
Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
volume 04.07
Dimension Stone
ASTM C735-04
Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass
Containers
volume 15.02
ASTM C736-00(2006)e1
Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants
volume 04.07
Dimension Stone
ASTM C737-02
Standard Specification for Limestone for Dusting of Coal Mines
volume 04.01
ASTM C738-94(2006)
Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
volume 15.02
ASTM C739-05b
Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
volume 04.06
ASTM C740-97(2004)
Standard Practice for Evacuated Reflective Insulation In Cryogenic Service
volume 04.06
ASTM C743-87(2004)e1
Standard Test Method for Continuity of Porcelain Enamel Coatings
volume 02.05
ASTM C744-05
Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units
volume 04.05
ASTM C745-92(1999)
Standard Test Method for Heat Flux Through Evacuated Insulations Using a Guarded Flat Plate Boiloff
Calorimeter
volume 04.06
ASTM C746-90(2003)e1
Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading
volume 04.05
ASTM C747-93(2005)
Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite
Materials by Sonic Resonance
volume 05.05
ASTM C748-98(2005)
Standard Test Method for Rockwell Hardness of Graphite Materials
volume 05.05
Strona 45
ASTM C749-92(2002)
Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
volume 05.05
ASTM C750-03
Standard Specification for Nuclear-Grade Boron Carbide Powder
volume 12.01
Nuclear Energy (I)
ASTM C752-03
Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy
volume 12.01
Nuclear Energy (I)
ASTM C753-04
Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder
volume 12.01
Nuclear Energy (I)
ASTM C754-04
Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel
Products
volume 04.01
ASTM C755-03
Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
volume 04.06
ASTM C756-87(1999)
Standard Test Method for Cleanability of Surface Finishes
volume 02.05
ASTM C757-90(2002)
Standard Specification for Nuclear-Grade Plutonium Dioxide Powder, Sinterable
volume 12.01
Nuclear Energy (I)
ASTM C758-04
Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical
Analysis of Nuclear-Grade Plutonium Metal
volume 12.01
Nuclear Energy (I)
ASTM C759-04
Analysis of Nuclear-Grade Plutonium Nitrate Solutions
volume 12.01
Nuclear Energy (I)
ASTM C760-90(2002)
Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-IndiumCadmium Alloys
volume 12.01
Nuclear Energy (I)
ASTM C761-04e1
Analysis of Uranium Hexafluoride
volume 12.01
Nuclear Energy (I)
ASTM C764-06
Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
volume 04.06
ASTM C765-97(2001)e1
Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
volume 04.07
Dimension Stone
ASTM C767-93(2004)
Standard Test Method for Thermal Conductivity of Carbon Refractories
volume 15.01
Ceramics
ASTM C769-98(2005)
Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in
Obtaining an Approximate Young's Modulus
volume 05.05
ASTM C770-98(2003)
Standard Test Method for Measurement of Glass Stress—Optical Coefficient
volume 15.02
ASTM C771-03
Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
volume 04.07
Dimension Stone
ASTM C772-03
Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
volume 04.07
Dimension Stone
ASTM C773-88(2006)
Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
volume 15.02
ASTM C774-88(2006)
Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing
volume 02.05
ASTM C776-00
Standard Specification for Sintered Uranium Dioxide Pellets
volume 12.01
Nuclear Energy (I)
ASTM C777-04
Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass
volume 15.02
ASTM C778-06
Standard Specification for Standard Sand
volume 04.01
ASTM C779/C779M-05
Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces
volume 04.02
ASTM C780-06
Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced
Unit Masonry
volume 04.05
ASTM C781-02
Standard Practice for Testing Graphite and Boronated Graphite Components for High-Temperature GasCooled Nuclear Reactors
volume 05.05
ASTM C782-03
Standard Test Method for Softness of Preformed Tape Sealants
volume 04.07
Dimension Stone
ASTM C783-85(2005)
Standard Practice for Core Sampling of Graphite Electrodes
volume 05.05
ASTM C784-05
Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets
volume 12.01
Nuclear Energy (I)
ASTM C786-96(2003)
Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm
(No. 100), and 75-μm (No. 200) Sieves by Wet Methods
volume 04.01
ASTM C787-06
Standard Specification for Uranium Hexafluoride for Enrichment
volume 12.01
Nuclear Energy (I)
ASTM C788-03
Standard Specification for Nuclear-Grade Uranyl Nitrate Solution or Crystals
volume 12.01
Nuclear Energy (I)
ASTM C791-04
Boron Carbide
volume 12.01
Nuclear Energy (I)
ASTM C792-04
Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric
Sealants
volume 04.07
Dimension Stone
ASTM C793-05
Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
volume 04.07
Dimension Stone
ASTM C794-06
Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
volume 04.07
Dimension Stone
ASTM C795-03
Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
volume 04.06
ASTM C796-04
Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
volume 04.02
ASTM C799-99(2005)
Analysis of Nuclear-Grade Uranyl Nitrate Solutions
volume 12.01
Nuclear Energy (I)
ASTM C800-05
Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
volume 04.06
ASTM C802-96(2002)
Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test
Methods for Construction Materials
volume 04.02
ASTM C803/C803M-03
Standard Test Method for Penetration Resistance of Hardened Concrete
volume 04.02
ASTM C805-02
Standard Test Method for Rebound Number of Hardened Concrete
volume 04.02
ASTM C806-04
Standard Test Method for Restrained Expansion of Expansive Cement Mortar
volume 04.01
ASTM C807-05
Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
volume 04.01
ASTM C808-75(2005)
Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite
Bearing and Seal Materials
volume 05.05
ASTM C809-94(2000)
Aluminum Oxide and Aluminum Oxide-Boron Carbide Composite Pellets
volume 12.01
Nuclear Energy (I)
Strona 46
ASTM C810-90(2000)
Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
volume 02.05
ASTM C811-98(2003)
Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin
Monolithic Surfacings
volume 04.05
ASTM C813-90(2004)
Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
volume 15.02
ASTM C816-85(2005)
Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method
volume 05.05
ASTM C821-78(2000)
Standard Specification for Lime for Use with Pozzolans
volume 04.01
ASTM C822-06
Standard Termninology Relating to Concrete Pipe and Related Products
volume 04.05
ASTM C823-00
Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
volume 04.02
ASTM C824-91(2005)
Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous
Glass Enamels and Glass Enamel Frits by the Dilatometer Method
volume 15.02
ASTM C825-06
Standard Specification for Precast Concrete Barriers
volume 04.05
ASTM C827-01a(2005)
Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
volume 04.02
ASTM C828-03
Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
volume 04.05
ASTM C829-81(2005)
Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
volume 15.02
ASTM C830-00
Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk
Density of Refractory Shapes by Vacuum Pressure
volume 15.01
Ceramics
ASTM C831-98(2003)
Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in
Coked Carbon-Containing Brick and Shapes
volume 15.01
Ceramics
ASTM C832-00(2005)
Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load
volume 15.01
Ceramics
ASTM C833-01
Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets
volume 12.01
Nuclear Energy (I)
ASTM C834-05
Standard Specification for Latex Sealants
volume 04.07
Dimension Stone
ASTM C835-01(2006)
Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C
volume 04.06
ASTM C836-06
Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane
for Use with Separate Wearing Course
volume 04.07
Dimension Stone
ASTM C837-99(2003)
Standard Test Method for Methylene Blue Index of Clay
volume 15.02
ASTM C838-96(2005)
Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
volume 05.05
ASTM C839-82(2005)
Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
volume 02.05
ASTM C840-06
Standard Specification for Application and Finishing of Gypsum Board
volume 04.01
ASTM C841-03
Standard Specification for Installation of Interior Lathing and Furring
volume 04.01
ASTM C842-05
Standard Specification for Application of Interior Gypsum Plaster
volume 04.01
ASTM C843-99(2006)
Standard Specification for Application of Gypsum Veneer Plaster
volume 04.01
ASTM C844-04
Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
volume 04.01
ASTM C845-04
Standard Specification for Expansive Hydraulic Cement
volume 04.01
ASTM C846-94(2003)
Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
volume 04.06
ASTM C847-04
Standard Specification for Metal Lath
volume 04.01
ASTM C848-88(2006)
Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio For Ceramic Whitewares
by Resonance
volume 15.02
ASTM C849-88(2006)
Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
volume 15.02
ASTM C856-04
Standard Practice for Petrographic Examination of Hardened Concrete
volume 04.02
ASTM C857-95(2001)
Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility
Structures
volume 04.05
ASTM C858-83(2004)
Standard Specification for Underground Precast Concrete Utility Structures
volume 04.05
ASTM C860-00(2005)
Standard Practice for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
volume 15.01
Ceramics
ASTM C861-93(2005)
Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
volume 15.01
Ceramics
ASTM C862-02
Standard Practice for Preparing Refractory Concrete Specimens by Casting
volume 15.01
Ceramics
ASTM C863-00(2005)
Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated
Temperatures
volume 15.01
Ceramics
ASTM C864-05
Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
volume 04.07
Dimension Stone
ASTM C865-02
Standard Practice for Firing Refractory Concrete Specimens
volume 15.01
Ceramics
ASTM C866-77(2006)
Standard Test Method for Filtration Rate of Ceramic Whiteware Clays
volume 15.02
ASTM C867-94(2000)
Standard Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method)
volume 15.02
ASTM C868-02
Standard Test Method for Chemical Resistance of Protective Linings
volume 04.05
ASTM C869-91(2006)
Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete
volume 04.02
Strona 47
ASTM C870-96(2004)
Standard Practice for Conditioning of Thermal Insulating Materials
volume 04.06
ASTM C871-04
Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride,
Fluoride, Silicate, and Sodium Ions
volume 04.06
ASTM C872-89(2005)
Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces
volume 02.05
ASTM C873-04
Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
volume 04.02
ASTM C874-99(2004)
Standard Practice for Rotary Slag Testing of Refractory Materials
volume 15.01
Ceramics
ASTM C875-98(2003)e1
Standard Specification for Asbestos-Cement Conduit
volume 04.05
ASTM C876-91(1999)
Standard Test Method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete
volume 03.02
Wear and Erosion; Metal Corrosion
ASTM C876-91(1999)
Standard Test Method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete
volume 04.02
ASTM C877-02e1
Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
volume 04.05
ASTM C877M-02e1
Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
[Metric]
volume 04.05
ASTM C878/C878M-03
Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete
volume 04.02
ASTM C879-03
Standard Test Methods for Release Papers Used With Preformed Tape Sealants
volume 04.07
Dimension Stone
ASTM C880-06
Standard Test Method for Flexural Strength of Dimension Stone
volume 04.07
Dimension Stone
ASTM C881/C881M-02
Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
volume 04.02
ASTM C882-05
Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
volume 04.02
ASTM C884/C884M-98(2005)
Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
volume 04.02
ASTM C885-87(2002)
Standard Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance
volume 15.01
Ceramics
ASTM C886-98(2005)
Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
volume 05.05
ASTM C887-05
Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
volume 04.05
ASTM C888-03
Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
volume 12.01
Nuclear Energy (I)
ASTM C889-06
Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide
(Gd2O3) Powder
volume 12.01
Nuclear Energy (I)
ASTM C890-06
Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete
Water and Wastewater Structures
volume 04.05
ASTM C891-90(2003)
Standard Practice for Installation of Underground Precast Concrete Utility Structures
volume 04.05
ASTM C892-05
Standard Specification for High-Temperature Fiber Blanket Thermal Insulation
volume 04.06
ASTM C895-87(2003)
Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile
volume 15.02
ASTM C896-04
Standard Terminology Relating to Clay Products
volume 04.05
ASTM C897-05
Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
volume 04.01
ASTM C898-01
Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane
With Separate Wearing Course
volume 04.07
Dimension Stone
ASTM C899-79(2002)
Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials
(COMMITTEE C-8 SUPPLEMENT TO E 380)
volume 15.01
Ceramics
ASTM C900-01
Standard Test Method for Pullout Strength of Hardened Concrete
volume 04.02
ASTM C901-01
Standard Specification for Prefabricated Masonry Panels
volume 04.05
ASTM C902-05a
Standard Specification for Pedestrian and Light Traffic Paving Brick
volume 04.05
ASTM C903-98(2004)
Standard Practice for Preparing Refractory Castable Specimens by Cold Gunning
volume 15.01
Ceramics
ASTM C904-01
Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials
volume 04.05
ASTM C905-01
Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings,
and Polymer Concretes
volume 04.05
ASTM C907-03
Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
volume 04.07
Dimension Stone
ASTM C908-00(2006)
Standard Test Method for Yield Strength of Preformed Tape Sealants
volume 04.07
Dimension Stone
ASTM C909-93(2005)
Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes
volume 15.01
Ceramics
ASTM C910-06
Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
volume 04.07
Dimension Stone
ASTM C911-05
Standard Specification for Quicklime, Hydrated Lime, and Limestone for Chemical Uses
volume 04.01
ASTM C912-93(2003)
Standard Practice for Designing a Process for Cleaning Technical Glasses
volume 15.02
ASTM C913-02
Standard Specification for Precast Concrete Water and Wastewater Structures
volume 04.05
Strona 48
ASTM C914-95(2004)
Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
volume 15.01
Ceramics
ASTM C915-79(2002)
Standard Specification for Precast Reinforced Concrete Crib Wall Members
volume 04.05
ASTM C916-85(2001)e1
Standard Specification for Adhesives for Duct Thermal Insulation
volume 04.06
ASTM C917-05
Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source
volume 04.01
ASTM C918-02
Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
volume 04.02
ASTM C919-02
Standard Practice for Use of Sealants in Acoustical Applications
volume 04.07
Dimension Stone
ASTM C920-05
Standard Specification for Elastomeric Joint Sealants
volume 04.07
Dimension Stone
ASTM C921-03a
Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
volume 04.06
ASTM C922-00
Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets
volume 12.01
Nuclear Energy (I)
ASTM C923-02
Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes
and Laterals
volume 04.05
ASTM C923M-02
Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes,
and Laterals [Metric]
volume 04.05
ASTM C924-02
Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
volume 04.05
ASTM C924M-02
Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)
volume 04.05
ASTM C925-79(2000)
Standard Test Method for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders
volume 15.02
ASTM C926-06
Standard Specification for Application of Portland Cement-Based Plaster
volume 04.01
ASTM C927-80(2004)
Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers
Externally Decorated with Ceramic Glass Enamels
volume 15.02
ASTM C928-05
Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
volume 04.02
ASTM C929-94(2004)e1
Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal
Insulation Materials For Use in Contact with Austenitic Stainless Steel
volume 04.06
ASTM C930-05
Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation
Materials and Accessories
volume 04.06
ASTM C932-06
Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering
volume 04.01
ASTM C933-05
Standard Specification for Welded Wire Lath
volume 04.01
ASTM C935-80(2002)
Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast
volume 04.05
ASTM C936-01
Standard Specification for Solid Concrete Interlocking Paving Units
volume 04.05
ASTM C937-02
Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
volume 04.02
ASTM C938-02
Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
volume 04.02
ASTM C939-02
Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
volume 04.02
ASTM C940-98a(2003)
Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate
Concrete in the Laboratory
volume 04.02
ASTM C941-02
Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the
Laboratory
volume 04.02
ASTM C942-99(2004)
Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the
Laboratory
volume 04.02
ASTM C943-02
Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of PreplacedAggregate Concrete in the Laboratory
volume 04.02
ASTM C944-99(2005)
Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter
Method
volume 04.02
ASTM C945-05
Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane
Insulation System on Outdoor Service Vessels
volume 04.06
ASTM C946-91(2001)
Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls
volume 04.05
ASTM C947-03
Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using
Simple Beam With Third-Point Loading)
volume 04.05
ASTM C948-81(2001)
Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin
Sections of Glass-Fiber Reinforced Concrete
volume 04.05
ASTM C949-80(2000)
Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration
volume 15.02
ASTM C950-05
Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
volume 04.06
ASTM C952-02e1
Standard Test Method for Bond Strength of Mortar to Masonry Units
volume 04.05
ASTM C953-06
Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
volume 04.02
ASTM C954-04
Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster
Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
volume 04.01
ASTM C955-06
Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing
or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
volume 04.01
ASTM C956-04
Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
volume 04.01
Strona 49
ASTM C957-06
Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane
With Integral Wearing Surface
volume 04.07
Dimension Stone
ASTM C958-92(2000)
Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity
Sedimentation
volume 15.02
ASTM C961-01
Standard Test Method for Lap Shear Strength of Hot-Applied Sealants
volume 04.07
Dimension Stone
ASTM C963-00
Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
volume 04.07
Dimension Stone
ASTM C964-88(2002)e1
Standard Guide for Lock-Strip Gasket Glazing
volume 04.07
Dimension Stone
ASTM C965-96(2002)
Standard Practice for Measuring Viscosity of Glass Above the Softening Point
volume 15.02
ASTM C966-98(2003)e1
Standard Guide for Installing Asbestos-Cement Nonpressure Pipe
volume 04.05
ASTM C967-02a
Standard Specification for Uranium Ore Concentrate
volume 12.01
Nuclear Energy (I)
ASTM C968-99
Standard Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets
volume 12.01
Nuclear Energy (I)
ASTM C969-02
Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe
Sewer Lines
volume 04.05
ASTM C969M-02
Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe
Sewer Lines [Metric]
volume 04.05
ASTM C970-87(2006)
Standard Practice for Sampling Special Nuclear Materials in Multi-Container Lots
volume 12.01
Nuclear Energy (I)
ASTM C972-00(2006)
Standard Test Method for Compression-Recovery of Tape Sealant
volume 04.07
Dimension Stone
ASTM C973-87(1998)
Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
volume 15.01
Ceramics
ASTM C974-87(1998)
Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
volume 15.01
Ceramics
ASTM C975-87(1998)
Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
volume 15.01
Ceramics
ASTM C977-03
Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
volume 04.01
ASTM C978-04
Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix
Using a Polarizing Microscope and Optical Retardation Compensation Procedures
volume 15.02
ASTM C979-05
Standard Specification for Pigments for Integrally Colored Concrete
volume 04.02
ASTM C980-88(2001)
Standard Specification for Industrial Chimney Lining Brick
volume 04.05
ASTM C981-05
Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
volume 04.07
Dimension Stone
ASTM C982-03
Standard Guide for Selecting Components for Energy-Dispersive X-Ray Fluorescence (XRF) Systems
volume 12.01
Nuclear Energy (I)
ASTM C985-04e1
Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
volume 04.05
ASTM C985M-04e1
Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
[Metric]
volume 04.05
ASTM C987-00a(2005)
Standard Practice for Vapor Attack on Refractories for Furnace Superstructures
volume 15.01
Ceramics
ASTM C989-05
Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
volume 04.02
ASTM C990-03a
Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed
Flexible Joint Sealants
volume 04.05
ASTM C990M-03a
Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed
Flexible Joint Sealants [Metric]
volume 04.05
ASTM C991-03
Standard Specification for Flexible Glass Fiber Insulation for Metal Buildings
volume 04.06
ASTM C992-06
Standard Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel
Storage Racks
volume 12.01
Nuclear Energy (I)
ASTM C993-97(2003)
Standard Guide for In-Plant Performance Evaluation of Automatic Pedestrian SNM Monitors
volume 12.01
Nuclear Energy (I)
ASTM C995-01
Standard Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone
volume 04.02
ASTM C996-04e1
Standard Specification for Uranium Hexafluoride Enriched to Less Than 5 % 235U
volume 12.01
Nuclear Energy (I)
ASTM C998-05
Standard Practice for Sampling Surface Soil for Radionuclides
volume 12.01
Nuclear Energy (I)
ASTM C999-05
Standard Practice for Soil Sample Preparation for the Determination of Radionuclides
volume 12.01
Nuclear Energy (I)
ASTM C1000-05
Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1001-05
Standard Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy
volume 12.01
Nuclear Energy (I)
ASTM C1002-04
Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products
or Metal Plaster Bases to Wood Studs or Steel Studs
volume 04.01
ASTM C1005-05
Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the
Physical Testing of Hydraulic Cements
volume 04.01
ASTM C1006-84(2001)
Standard Test Method for Splitting Tensile Strength of Masonry Units
volume 04.05
ASTM C1007-04
Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related
Accessories
volume 04.01
ASTM C1008-99
Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets-Fast Reactor Fuel
volume 12.01
Nuclear Energy (I)
ASTM C1009-06
Standard Guide for Establishing a Quality Assurance Program for Analytical Chemistry Laboratories Within
the Nuclear Industry
volume 12.01
Nuclear Energy (I)
ASTM C1012-04
Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
volume 04.01
Strona 50
ASTM C1014-03
Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
volume 04.06
ASTM C1015-06
Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
volume 04.06
ASTM C1016-02
Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
volume 04.07
Dimension Stone
ASTM C1017/C1017M-03
Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
volume 04.02
ASTM C1019-05
Standard Test Method for Sampling and Testing Grout
volume 04.05
ASTM C1021-01
Standard Practice for Laboratories Engaged in the Testing of Building Sealants
volume 04.07
Dimension Stone
ASTM C1022-05
Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate
volume 12.01
Nuclear Energy (I)
ASTM C1023-87(1999)
Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards
volume 15.02
ASTM C1025-91(2005)
Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
volume 05.05
ASTM C1026-87(2002)
Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
volume 15.02
ASTM C1027-99(2004)
Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile
volume 15.02
ASTM C1029-05a
Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
volume 04.06
ASTM C1030-03
Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1031-05
Standard Specification for Nuclear-Grade Aluminum Oxide Powder
volume 12.01
Nuclear Energy (I)
ASTM C1032-06
Standard Specification for Woven Wire Plaster Base
volume 04.01
ASTM C1036-01
Standard Specification for Flat Glass
volume 15.02
ASTM C1037-85(2002)
Standard Practice for Inspection of Underground Precast Concrete Utility Structures
volume 04.05
ASTM C1038-04
Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
volume 04.01
ASTM C1039-85(2005)
Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite
Electrodes
volume 05.05
ASTM C1040-05
Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller
Compacted Concrete, By Nuclear Methods
volume 04.02
ASTM C1041-85(2001)
Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux
Transducers
volume 04.06
ASTM C1042-99
Standard Test Method for Bond Strength of Latex Systems Used With Concrete By Slant Shear
volume 04.02
ASTM C1043-97(2002)
Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
volume 04.06
ASTM C1044-98(2003)
Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided
Mode
volume 04.06
ASTM C1045-01
Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
volume 04.06
ASTM C1046-95(2001)
Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope
Components
volume 04.06
ASTM C1047-05
Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
volume 04.01
ASTM C1048-04
Standard Specification for Heat-Treated Flat Glass—Kind HS, Kind FT Coated and Uncoated Glass
volume 15.02
ASTM C1052-01
Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride
volume 12.01
Nuclear Energy (I)
ASTM C1053-00(2005)
Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV)
Applications
volume 15.02
ASTM C1054-03
Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
volume 15.01
Ceramics
ASTM C1055-03
Standard Guide for Heated System Surface Conditions That Produce Contact Burn Injuries
volume 04.06
ASTM C1057-03
Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using A
Mathematical Model and Thermesthesiometer
volume 04.06
ASTM C1058-03
Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal
Insulation
volume 04.06
ASTM C1059-99
Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete
volume 04.02
ASTM C1060-90(2003)
Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame
Buildings
volume 04.06
ASTM C1062-00
Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
volume 12.01
Nuclear Energy (I)
ASTM C1063-03
Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland
Cement-Based Plaster
volume 04.01
ASTM C1064/C1064M-05
Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
volume 04.02
ASTM C1066-97(2004)
Standard Specification for Nuclear Grade Zirconium Oxide Pellets
volume 12.01
Nuclear Energy (I)
ASTM C1067-00
Standard Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction
Materials
volume 04.02
ASTM C1068-03
Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
volume 12.01
Nuclear Energy (I)
ASTM C1069-86(2004)e1
Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
volume 15.02
ASTM C1070-01
Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light
Scattering
volume 15.02
ASTM C1071-05
Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
volume 04.06
ASTM C1072-05b
Standard Test Method for Measurement of Masonry Flexural Bond Strength
volume 04.05
ASTM C1073-97a(2003)
Standard Test Method for Hydraulic Activity of Ground Slag by Reaction with Alkali
volume 04.02
ASTM C1074-04
Standard Practice for Estimating Concrete Strength by the Maturity Method
volume 04.02
ASTM C1075-93(2004)
Standard Practices for Sampling Uranium-Ore Concentrate
volume 12.01
Nuclear Energy (I)
Strona 51
ASTM C1076-97(2004)
Standard Specification for Nuclear Grade Hafnium Oxide Pellets
volume 12.01
Nuclear Energy (I)
ASTM C1077-06
Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and
Criteria for Laboratory Evaluation
volume 04.02
ASTM C1080-98(2003)e1
Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers
volume 04.05
ASTM C1081-98(2003)e1
Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers
volume 04.05
ASTM C1082-98(2003)e1
Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill
volume 04.05
ASTM C1083-06
Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
volume 04.07
Dimension Stone
ASTM C1084-02
Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
volume 04.02
ASTM C1086-96(2004)
Standard Specification for Glass Fiber Felt Thermal Insulation
volume 04.06
ASTM C1087-00(2006)
Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in
Structural Glazing Systems
volume 04.07
Dimension Stone
ASTM C1088-05a
Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
volume 04.05
ASTM C1090-01(2005)e1
Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
volume 04.02
ASTM C1091-03a
Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
volume 04.05
ASTM C1093-06
Standard Practice for Accreditation of Testing Agencies for Unit Masonry
volume 04.05
ASTM C1094-01(2006)
Standard Guide for Flexible Removable Insulation Covers
volume 04.06
ASTM C1096-91(2004)e1
Standard Test Method for Determination of Wood Fiber in Asbestos Cement
volume 04.05
ASTM C1097-06
Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Pavements
volume 04.01
ASTM C1099-92(2002)
Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated
Temperatures
volume 15.01
Ceramics
ASTM C1101/C1101M-00
Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
volume 04.06
ASTM C1103-03
Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
volume 04.05
ASTM C1103M-03
Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
volume 04.05
Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
volume 04.06
ASTM C1105-05
Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
volume 04.02
ASTM C1106-00(2005)
Standard Test Methods for Chemical Resistance and Physical Properties of Carbon Brick
volume 04.05
ASTM C1107-05
Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
volume 04.02
ASTM C1108-99
Standard Test Method for Plutonium by Controlled-Potential Coulometry
volume 12.01
Nuclear Energy (I)
ASTM C1109-04
Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively
Coupled Plasma-Atomic Emission Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1110-03
Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores
Using the Glass Fusion or Pressed Powder Method
volume 12.01
Nuclear Energy (I)
ASTM C1111-04
Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic
Emission Spectroscopy
volume 12.01
Nuclear Energy (I)
ASTM C1112-99(2005)
Standard Guide for Application of Radiation Monitors to the Control and Physical Security of Special Nuclear
Material
volume 12.01
Nuclear Energy (I)
ASTM C1113-99(2004)
Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance
Thermometer Technique)
volume 15.01
Ceramics
ASTM C1114-00(2006)
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater
Apparatus
volume 04.06
ASTM C1115-06
Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
volume 04.07
Dimension Stone
ASTM C1116-03
Standard Specification for Fiber-Reinforced Concrete and Shotcrete
volume 04.02
ASTM C1118-89(2000)
Standard Guide for Selecting Components for Wavelength-Dispersive X-Ray Fluorescence (XRF) Systems
volume 12.01
Nuclear Energy (I)
ASTM C1119-90(2004)e1
Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
volume 04.05
ASTM C1120-98(2002)e1
Standard Test Method for Wash Test of Asbestos
volume 04.05
ASTM C1121-04e1
Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
volume 04.05
ASTM C1122-90(2004)e1
Standard Test Method for Wet Volume of Asbestos
volume 04.05
ASTM
C1104/C1104M00(2006)
Strona 52
ASTM C1123-90(2004)e1
Standard Test Method for Compressibility and Recovery of Asbestos
volume 04.05
ASTM C1124-90(2004)e1
Standard Test Method for Kerosene Retention of Asbestos
volume 04.05
ASTM C1125-89(2004)e1
Standard Test Method for Penetration Index of Asbestos
volume 04.05
ASTM C1126-04
Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
volume 04.06
ASTM C1127-01
Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane
with an Integral Wearing Surface
volume 04.07
Dimension Stone
ASTM C1128-01
Standard Guide for Preparation of Working Reference Materials for Use in the Analysis of Nuclear Fuel
Cycle Materials
volume 12.01
Nuclear Energy (I)
ASTM C1129-89(2001)
Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
volume 04.06
ASTM C1130-90(2001)
Standard Practice for Calibrating Thin Heat Flux Transducers
volume 04.06
ASTM C1131-95(2000)
Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary
Sewer Systems
volume 04.05
ASTM C1133-03
Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low Density Scrap and
Waste by Segmented Passive Gamma-Ray Scanning
volume 12.01
Nuclear Energy (I)
ASTM C1134-90(2001)
Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
volume 04.06
ASTM C1135-00(2005)
Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
volume 04.07
Dimension Stone
ASTM C1136-06
Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
volume 04.06
ASTM C1137-05
Standard Test Method for Degradation of Fine Aggregate Due to Attrition
volume 04.02
ASTM C1138M-05
Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
volume 04.02
ASTM C1139-90(2002)
Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for
Military Applications
volume 04.06
ASTM C1140-03a
Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
volume 04.02
ASTM C1141-06
Standard Specification for Admixtures for Shotcrete
volume 04.02
ASTM C1142-95(2001)
Standard Specification for Extended Life Mortar for Unit Masonry
volume 04.05
ASTM C1144-89(2004)
Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms
volume 12.01
Nuclear Energy (I)
ASTM C1145-06
Standard Terminology of Advanced Ceramics
volume 15.01
Ceramics
ASTM C1146-96(2003)
Standard Guide for Prefabricated Panel Insulation Systems for Ducts and Equipment Operating at
Temperatures Above Ambient Air
volume 04.06
ASTM C1147-01
Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant
Thermoplastics
volume 04.05
ASTM C1148-92a(2002)
Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar
volume 04.05
ASTM C1149-02
Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
volume 04.06
ASTM C1152/C1152M-04e1
Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
volume 04.02
ASTM C1153-97(2003)e1
Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
volume 04.06
ASTM C1154-02
Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products
volume 04.05
ASTM C1155-95(2001)
Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ
Data
volume 04.06
ASTM C1156-03
Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle
Materials
volume 12.01
Nuclear Energy (I)
ASTM C1157-03
Standard Performance Specification for Hydraulic Cement
volume 04.01
ASTM C1158-05
Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Building Construction
volume 04.06
ASTM C1159-98(2003)
Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid
Sulfur Concrete
volume 04.05
ASTM C1160-97(2003)
Standard Specification for Chemical-Resistant Carbon Brick
volume 04.05
ASTM C1161-02c
Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
volume 15.01
Ceramics
ASTM C1162-90(2004)e1
Standard Test Method for Loose Density of Asbestos
volume 04.05
ASTM C1163-03
Standard Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride
volume 12.01
Nuclear Energy (I)
ASTM C1164-92(2003)
Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
volume 04.01
ASTM C1165-90(2005)
Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4at a Platinum
Working Electrode
volume 12.01
Nuclear Energy (I)
ASTM C1166-06
Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
volume 04.07
Dimension Stone
Strona 53
ASTM C1167-03
Standard Specification for Clay Roof Tiles
volume 04.05
ASTM C1168-01
Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis
volume 12.01
Nuclear Energy (I)
ASTM C1169-97(2003)
Standard Guide for Laboratory Evaluation of Automatic Pedestrian SNM Monitor Performance
volume 12.01
Nuclear Energy (I)
ASTM C1170-06
Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a
Vibrating Table
volume 04.02
ASTM C1171-05
Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on
Refractories
volume 15.01
Ceramics
ASTM C1172-03
Standard Specification for Laminated Architectural Flat Glass
volume 15.02
ASTM C1173-02
Standard Specification for Flexible Transition Couplings for Underground Piping Systems
volume 01.02
ASTM C1174-04
Standard Practice for Prediction of the Long-Term Behavior of Materials, Including Waste Forms, Used in
Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste
volume 12.01
Nuclear Energy (I)
ASTM C1175-99a(2004)
Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics
volume 15.01
Ceramics
ASTM C1176-05
Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
volume 04.02
ASTM C1177/C1177M-06
Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
volume 04.01
ASTM C1178/C1178M-04e1
Standard Specification for Glass Mat Water-Resistant Gypsum Backing Panel
volume 04.01
ASTM C1179-91(2005)
Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
volume 05.05
ASTM C1180-03ae1
Standard Terminology of Mortar and Grout for Unit Masonry
volume 04.05
ASTM C1181-00(2005)
Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
volume 04.05
ASTM C1182-91(2001)
Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal
Photosedimentation
volume 15.02
ASTM C1183-04
Standard Test Method for Extrusion Rate of Elastomeric Sealants
volume 04.07
Dimension Stone
ASTM C1184-05
Standard Specification for Structural Silicone Sealants
volume 04.07
Dimension Stone
ASTM C1185-03
Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and
Siding Shingles, and Clapboards
volume 04.05
ASTM C1186-02
Standard Specification for Flat Non-Asbestos Fiber-Cement Sheets
volume 04.05
ASTM C1187-91(1999)
Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material
Systems for Use in Nuclear Spent Fuel Storage Racks
volume 12.01
Nuclear Energy (I)
ASTM C1188-04
Standard Guide for Establishing a Quality Assurance Program for Uranium Conversion Facilities1
volume 12.01
Nuclear Energy (I)
ASTM C1189-02
Standard Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors
volume 12.01
Nuclear Energy (I)
ASTM C1190-95(2005)
Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic
Brick
volume 15.01
Ceramics
ASTM C1193-05a
Standard Guide for Use of Joint Sealants
volume 04.07
Dimension Stone
ASTM C1194-03
Standard Test Method for Compressive Strength of Architectural Cast Stone
volume 04.05
ASTM C1195-03
Standard Test Method for Absorption of Architectural Cast Stone
volume 04.05
ASTM C1196-04
Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack
Measurements
volume 04.05
ASTM C1197-04
Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack
Method
volume 04.05
ASTM C1198-01
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced
Ceramics by Sonic Resonance
volume 15.01
Ceramics
ASTM C1199-00
Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems
Using Hot Box Methods
volume 04.06
ASTM C1201-91(2003)
Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform
Static Air Pressure Difference
volume 04.07
Dimension Stone
ASTM C1202-05
Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
volume 04.02
ASTM C1203-04
Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
volume 15.02
ASTM C1204-02
Standard Test Method for Uranium in the Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid
Followed by Chromium(VI) Titration
volume 12.01
Nuclear Energy (I)
ASTM C1205-97(2002)
Standard Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1206-02
Standard Test Method for Plutonium by Iron (II)/Chromium (VI) Amperometric Titration
volume 12.01
Nuclear Energy (I)
ASTM C1207-03
Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron
Coincidence Counting
volume 12.01
Nuclear Energy (I)
ASTM C1208/C1208M-04
Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting,
and Tunnels
volume 04.05
ASTM C1209-05e1
Standard Terminology of Concrete Masonry Units and Related Units
volume 04.05
ASTM C1210-06
Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry
Laboratories Within the Nuclear Industry
volume 12.01
Nuclear Energy (I)
Strona 54
ASTM C1211-02
Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
volume 15.01
Ceramics
ASTM C1212-98(2004)
Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids
volume 15.01
Ceramics
ASTM C1214-02
Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
volume 04.05
ASTM C1214M-02
Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
[Metric]
volume 04.05
ASTM C1215-92(2006)
Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards
Used in the Nuclear Industry
volume 12.01
Nuclear Energy (I)
ASTM C1216-03
Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
volume 04.07
Dimension Stone
ASTM C1217-00(2006)
Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials
volume 12.01
Nuclear Energy (I)
ASTM C1218/C1218M-99
Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
volume 04.02
ASTM C1219-05
Standard Test Methods for Arsenic in Uranium Hexafluoride
volume 12.01
Nuclear Energy (I)
ASTM C1220-98(2004)
Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste
volume 12.01
Nuclear Energy (I)
ASTM C1221-92(2004)
Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions
by Gamma-Ray Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1222-05a
Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
volume 04.01
ASTM C1223-92(2003)
Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
volume 15.01
Ceramics
ASTM C1224-03
Standard Specification for Reflective Insulation for Building Applications
volume 04.06
ASTM C1225-04
Standard Specification for Non-Asbestos Fiber-Cement Roofing Shingles, Shakes, and Slates
volume 04.05
ASTM C1226-93(2002)e1
Standard Test Method for Soluble Chlorides in Asbestos
volume 04.05
ASTM C1227-05
Standard Specification for Precast Concrete Septic Tanks
volume 04.05
ASTM C1228-96(2004)
Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced
Concrete
volume 04.05
ASTM C1229-94(2001)
Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC)
(Wash-Out Test)
volume 04.05
ASTM C1230-96(2004)
Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding
Pads
volume 04.05
ASTM C1231/C1231M-00e1
Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened
Concrete Cylinders
volume 04.02
ASTM C1232-05
Standard Terminology of Masonry
volume 04.05
ASTM C1233-03
Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
volume 12.01
Nuclear Energy (I)
ASTM C1234-98(2004)
Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature
Digestion for Trace Element Determinations
volume 12.01
Nuclear Energy (I)
ASTM C1236-99(2005)
Standard Guide for In-Plant Performance Evaluation of Automatic Vehicle SNM Monitors
volume 12.01
Nuclear Energy (I)
ASTM C1237-99(2005)
Standard Guide to In-Plant Performance Evaluation of Hand-Held SNM Monitors
volume 12.01
Nuclear Energy (I)
ASTM C1238-97(2003)
Standard Guide for Installation of Walk-Through Metal Detectors
volume 12.01
Nuclear Energy (I)
ASTM C1239-06
Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for
Advanced Ceramics
volume 15.01
Ceramics
ASTM C1240-05
Standard Specification for Silica Fume Used in Cementitious Mixtures
volume 04.02
ASTM C1241-00(2005)
Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
volume 04.07
Dimension Stone
ASTM C1242-05
Standard Guide for Selection, Design, and Installation of Dimension Stone Anchoring Systems
volume 04.07
Dimension Stone
ASTM C1243-93(2003)
Standard Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating
Disc
volume 15.02
ASTM C1244-05ae1
Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to
Backfill
volume 04.05
ASTM C1244M-05ae1
Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to
Backfill [Metric]
volume 04.05
ASTM C1245/C1245M-06
Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and
Other Hardened Cementitious Mixtures (Point Load Test)
volume 04.02
ASTM C1246-00
Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric
Sealants After Cure
volume 04.07
Dimension Stone
ASTM C1247-98(2004)
Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
volume 04.07
Dimension Stone
ASTM C1248-06
Standard Test Method for Staining of Porous Substrate by Joint Sealants
volume 04.07
Dimension Stone
ASTM C1249-93(2000)
Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing
Applications
volume 04.07
Dimension Stone
ASTM C1250-05
Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes
volume 04.07
Dimension Stone
ASTM C1252-03
Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape,
Surface Texture, and Grading)
volume 04.02
Strona 55
ASTM C1253-93(2005)
Standard Test Method for Determining the Outgassing Potential of Sealant Backing
volume 04.07
Dimension Stone
ASTM C1254-99(2005)
Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence
volume 12.01
Nuclear Energy (I)
ASTM C1255-93(2005)
Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray
Fluorescence Spectroscopy
volume 12.01
Nuclear Energy (I)
ASTM C1256-93(2003)
Standard Practice for Interpreting Glass Fracture Surface Features
volume 15.02
ASTM C1257-06
Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
volume 04.07
Dimension Stone
ASTM C1258-94(2000)
Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
volume 04.06
ASTM C1259-01
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced
Ceramics by Impulse Excitation of Vibration
volume 15.01
Ceramics
ASTM C1260-05a
Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
volume 04.02
ASTM C1261-05
Standard Specification for Firebox Brick for Residential Fireplaces
volume 04.05
ASTM C1262-05a
Standard Test Method for Evaluating the Freeze-Thaw Durability of Manufactured Concrete Masonry Units
and Related Concrete Units
volume 04.05
ASTM C1263-95(2005)
Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
volume 04.06
ASTM C1264-05
Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping,
Handling, and Storage of Gypsum Board
volume 04.01
ASTM C1265-94(2005)e1
Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural
Glazing Applications
volume 04.07
Dimension Stone
ASTM C1266-02
Standard Test Method for Flow Characteristics of Preformed Tape Sealants
volume 04.07
Dimension Stone
ASTM C1267-00
Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI)
Titration in the Presence of Vanadium
volume 12.01
Nuclear Energy (I)
ASTM C1268-94(2000)
Standard Test Method for Quantitative Determination of Americium 241 in Plutonium by Gamma-Ray
Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1269-97(2003)
Standard Practice for Adjusting the Operational Sensitivity Setting of In-Plant Walk-Through Metal Detectors
volume 12.01
Nuclear Energy (I)
ASTM C1270-97(2003)
Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
volume 12.01
Nuclear Energy (I)
ASTM C1271-99(2006)
Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
volume 04.01
ASTM C1272-05a
Standard Specification for Heavy Vehicular Paving Brick
volume 04.05
ASTM C1273-05
Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
volume 15.01
Ceramics
ASTM C1274-00(2006)
Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
volume 15.01
Ceramics
ASTM C1275-00(2005)e1
Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics
with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
volume 15.01
Ceramics
ASTM C1276-94(2005)
Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a
Rotational Viscometer
volume 15.01
Ceramics
ASTM C1277-04
Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
volume 01.02
ASTM C1278/C1278M-03e1
Standard Specification for Fiber-Reinforced Gypsum Panel
volume 04.01
ASTM C1279-05
Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in
Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
volume 15.02
ASTM C1280-04
Standard Specification for Application of Gypsum Sheathing
volume 04.01
ASTM C1281-03
Standard Specification for Preformed Tape Sealants for Glazing Applications
volume 04.07
Dimension Stone
ASTM C1282-00(2006)
Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal
Photosedimentation
volume 15.01
Ceramics
ASTM C1283-03e1
Standard Practice for Installing Clay Flue Lining
volume 04.05
ASTM C1284-00(2005)
Standard Practice for Electrodeposition of the Actinides for Alpha Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1285-02
Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste
Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)
volume 12.01
Nuclear Energy (I)
ASTM C1287-03
Standard Test Method for Determination of Impurities in Uranium Dioxide by Inductively Coupled Plasma
Mass Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1288-99(2004)
Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets
volume 04.05
ASTM C1289-06
Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
volume 04.06
ASTM C1290-06
Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
volume 04.06
ASTM C1291-00a(2005)
Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Timeto-Failure for Advanced Monolithic Ceramics
volume 15.01
Ceramics
ASTM C1292-00(2005)
Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient
Temperatures
volume 15.01
Ceramics
ASTM C1293-05
Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
volume 04.02
ASTM C1294-01
Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing
Materials
volume 04.07
Dimension Stone
ASTM C1295-05
Standard Test Method for Gamma Energy Emission from Fission Products in Uranium Hexafluoride
volume 12.01
Nuclear Energy (I)
ASTM C1296-95(2001)
Standard Test Method for Determination of Sulfur in Uranium Oxides and Uranyl Nitrate Solutions by X-Ray
Fluorescence (XRF)
volume 12.01
Nuclear Energy (I)
ASTM C1297-03
Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
volume 12.01
Nuclear Energy (I)
Strona 56
ASTM C1298-95(2001)
Standard Guide for the Design and Construction of Brick Liners for Industrial Chimneys
volume 04.05
ASTM C1299-03
Standard Guide for Use in Selection of Liquid-Applied Sealants
volume 04.07
Dimension Stone
ASTM C1300-95(2001)
Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the
Interferometric Method
volume 15.02
ASTM C1301-95(2001)
Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled PlasmaAtomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
volume 04.01
ASTM C1302-04
Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
volume 04.06
ASTM C1303-00
Standard Test Method for Estimating the Long-Term Change in the Thermal Resistance of Unfaced Rigid
Closed Cell Plastic Foams by Slicing and Scaling Under Controlled Laboratory Conditions
volume 04.06
ASTM C1304-95(2001)
Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
volume 04.06
ASTM C1305-06
Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
volume 04.07
Dimension Stone
ASTM C1306-05a
Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
volume 04.07
Dimension Stone
ASTM C1307-02
Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry
volume 12.01
Nuclear Energy (I)
ASTM C1308-95(2001)
Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a
Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms
volume 12.01
Nuclear Energy (I)
ASTM C1309-97(2003)
Standard Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors
volume 12.01
Nuclear Energy (I)
ASTM C1310-01
Standard Test Method for Determining Radionuclides in Soils by Inductively Coupled Plasma-Mass
Spectrometry Using Flow Injection Preconcentration
volume 12.01
Nuclear Energy (I)
ASTM C1311-02
Standard Specification for Solvent Release Sealants
volume 04.07
Dimension Stone
ASTM C1312-97(2003)
Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test
Specimens in the Laboratory
volume 04.05
ASTM C1313-05
Standard Specification for Sheet Radiant Barriers for Building Construction Applications
volume 04.06
ASTM C1314-03b
Standard Test Method for Compressive Strength of Masonry Prisms
volume 04.05
ASTM C1315-06
Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and
Sealing Concrete
volume 04.02
ASTM C1316-01
Standard Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active
Neutron Counting Using a 252 Cf Shuffler
volume 12.01
Nuclear Energy (I)
ASTM C1318-95(2001)
Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and
Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
volume 04.01
ASTM C1319-01
Standard Specification for Concrete Grid Paving Units
volume 04.05
ASTM C1320-05
Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame
Construction
volume 04.06
ASTM C1321-04
Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building
Construction
volume 04.06
ASTM C1322-05b
Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
volume 15.01
Ceramics
ASTM C1323-96(2001)
Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring
Specimens at Ambient Temperature
volume 15.01
Ceramics
ASTM C1324-05
Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
volume 04.05
ASTM C1325-04
Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cement Substrate Sheets
volume 04.05
ASTM C1326-03
Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
volume 15.01
Ceramics
ASTM C1327-03
Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
volume 15.01
Ceramics
ASTM C1328-05
Standard Specification for Plastic (Stucco) Cement
volume 04.01
ASTM C1329-05
Standard Specification for Mortar Cement
volume 04.01
ASTM C1330-02
Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants
volume 04.07
Dimension Stone
ASTM C1331-01
Standard Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo
Cross-Correlation Method
volume 15.01
Ceramics
ASTM C1332-01
Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by
Pulse-Echo Contact Technique
volume 15.01
Ceramics
ASTM C1334-05e1
Standard Specification for Uranium Oxides with a 235U Content of Less Than 5 % for Dissolution Prior to
Conversion to Nuclear-Grade Uranium Dioxide
volume 12.01
Nuclear Energy (I)
ASTM C1335-04
Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber
Insulation
volume 04.06
ASTM C1336-96(2002)
Standard Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions
volume 15.01
Ceramics
ASTM C1337-96(2005)
Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Ceramic Composites
under Tensile Loading at Elevated Temperatures
volume 15.01
Ceramics
ASTM C1338-00
Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
volume 04.06
ASTM C1339-02e1
Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
volume 04.05
ASTM C1340-04
Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant
Barriers by Use of a Computer Program
volume 04.06
Strona 57
ASTM C1341-06
Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic
Composites
volume 15.01
Ceramics
ASTM C1343-96(2002)
Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by Xray Fluorescence
volume 12.01
Nuclear Energy (I)
ASTM C1344-97(2003)
Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass
Spectrometer Method
volume 12.01
Nuclear Energy (I)
ASTM C1345-96(2001)
Standard Test Method for Analysis of Total and Isotopic Uranium and Total Thorium in Soils by Inductively
Coupled Plasma-Mass Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1346-02
Standard Practice for Dissolution of UF6from P-10 Tubes
volume 12.01
Nuclear Energy (I)
ASTM C1347-02
Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis
volume 12.01
Nuclear Energy (I)
ASTM C1348-01
Standard Specification for Blended Uranium Oxides with a 235U Content of Less Than 5 % for Direct
Hydrogen Reduction to Nuclear Grade Uranium Dioxide
volume 12.01
Nuclear Energy (I)
ASTM C1349-04
Standard Specification for Architectural Flat Glass Clad Polycarbonate
volume 15.02
ASTM C1350M-96(2003)
Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range
(Approximately 108Pa·s to Approximately 10 13Pa·s) by Beam Bending (Metric)
volume 15.02
ASTM C1351M-96(2002)
Standard Test Method for Measurement of Viscosity of Glass Between 104Pa-s and 108Pa-s by Viscous
Compression of a Solid Right Cylinder [Metric]
volume 15.02
ASTM C1352-96(2002)
Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
volume 04.07
Dimension Stone
ASTM C1353-98e1
Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to
Foot Traffic
volume 04.07
Dimension Stone
ASTM C1354-96(2004)
Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone
volume 04.07
Dimension Stone
Standard Specification for Glass Fiber Reinforced Gypsum Composites
volume 04.01
ASTM C1356-96(2001)
Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical
Point-Count Procedure
volume 04.01
ASTM C1357-05
Standard Test Methods for Evaluating Masonry Bond Strength
volume 04.05
ASTM C1358-05
Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced
Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures
volume 15.01
Ceramics
ASTM C1359-05
Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced
Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures
volume 15.01
Ceramics
ASTM C1360-01
Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous FiberReinforced Advanced Ceramics at Ambient Temperatures
volume 15.01
Ceramics
ASTM C1361-01
Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at
Ambient Temperatures
volume 15.01
Ceramics
ASTM C1362-04
Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete
volume 04.02
ASTM C1363-05
Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of
a Hot Box Apparatus
volume 04.06
ASTM C1364-06
Standard Specification for Architectural Cast Stone
volume 04.05
ASTM C1365-98(2004)
Standard Test Method for Determination of the Proportion of Phases in Portland Cement and PortlandCement Clinker Using X-Ray Powder Diffraction Analysis
volume 04.01
ASTM C1366-04
Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
volume 15.01
Ceramics
ASTM C1367-01
Standard Test Method for Heat Resistance of Hot-Applied Sealants Under Dead Load Shear
volume 04.07
Dimension Stone
ASTM C1368-06
Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by
Constant Stress-Rate Flexural Testing at Ambient Temperature
volume 15.01
Ceramics
ASTM C1369-02
Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
volume 04.07
Dimension Stone
ASTM C1370-00(2005)
Standard Test Method for Determining the Chemical Resistance of Aggregates for Use in ChemicalResistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes
volume 04.05
ASTM C1371-04a
Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable
Emissometers
volume 04.06
ASTM C1372-04e1
Standard Specification for Dry-Cast Segmental Retaining Wall Units
volume 04.05
ASTM C1373-03
Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated
Winter Conditions
volume 04.06
ASTM C1374-03
Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building
Insulation
volume 04.06
ASTM C1375-00(2005)
Standard Guide for Substrates Used in Testing Building Seals and Sealants
volume 04.07
Dimension Stone
ASTM C1376-03
Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass
volume 15.02
ASTM C1377-97(2003)e1
Standard Test Method for Calibration of Surface/Stress Measuring Devices
volume 15.02
ASTM C1378-04
Standard Test Method for Determination of Resistance to Staining
volume 15.02
ASTM C1379-04
Standard Test Method for Analysis of Urine for Uranium-235 and Uranium-238 Isotopes by Inductively
Coupled Plasma-Mass Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1380-04
Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution
Mass Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1381-97(2002)e1
Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts
volume 04.01
ASTM C1382-05
Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and
Finish Systems (EIFS) Joints
volume 04.07
Dimension Stone
ASTM C1383-04
Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the
Impact-Echo Method
volume 04.02
ASTM C1384-06
Standard Specification for Admixtures for Masonry Mortars
volume 04.05
ASTM
C1355/C1355M96(2006)
Strona 58
ASTM
C1385/C1385M98(2004)e1
Standard Practice for Sampling Materials for Shotcrete
volume 04.02
ASTM C1386-98
Standard Specification for Precast Autoclaved Aerated Concrete (PAAC) Wall Construction Units
volume 04.05
ASTM C1387-03
Standard Guide for the Determination of Technetium-99 in Soil
volume 12.01
Nuclear Energy (I)
ASTM C1392-00(2005)
Standard Guide for Evaluating Failure of Structural Sealant Glazing
volume 04.07
Dimension Stone
ASTM C1393-00a
Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for
Pipes and Tanks
volume 04.06
ASTM C1394-03
Standard Guide for In-Situ Structural Silicone Glazing Evaluation
volume 04.07
Dimension Stone
ASTM C1396/C1396M-06
Standard Specification for Gypsum Board
volume 04.01
ASTM C1397-05
Standard Practice for Application of Class PB Exterior Insulation and Finish Systems
volume 04.01
ASTM C1398-98e1
Standard Test Method for Laboratory Determination of the Time Setting of Hydraulic-Cement Mortars
Containing Additives for Shotcrete by the Use of Gillmore Needles
volume 04.02
ASTM C1399-04
Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
volume 04.02
ASTM C1400-01
Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls
volume 04.05
ASTM C1401-02
Standard Guide for Structural Sealant Glazing
volume 04.07
Dimension Stone
ASTM C1402-04
Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
volume 12.01
Nuclear Energy (I)
ASTM C1403-05
Standard Test Method for Rate of Water Absorption of Masonry Mortars
volume 04.05
Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct
Tension
volume 04.02
ASTM C1405-05a
Standard Specification for Glazed Brick (Single Fired, Brick Units)
volume 04.05
ASTM C1407-98(2005)
Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
volume 15.01
Ceramics
ASTM C1408-98(2004)
Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct CombustionInfrared Detection Method
volume 12.01
Nuclear Energy (I)
ASTM C1409-98(2003)
Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components
volume 04.06
ASTM C1410-05a
Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
volume 04.06
ASTM C1411-01
Standard Practice for the Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis
volume 12.01
Nuclear Energy (I)
ASTM C1413-05
Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions
by Thermal Ionization Mass Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1414-01
Standard Practice for the Separation of Americium from Plutonium by Ion Exchange
volume 12.01
Nuclear Energy (I)
ASTM C1415-01
Standard Test Method for 238Pu Isotopic Abundance by Alpha Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1416-04
Standard Test Method for Uranium Analysis in Natural and Waste Water by X-Ray Fluorescence
volume 12.01
Nuclear Energy (I)
ASTM C1417-04
Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for
Direct Design
volume 04.05
ASTM C1417M-04
Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for
Direct Design (Metric)
volume 04.05
ASTM C1419-99a
Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in
Obtaining an Approximate Young's Modulus
volume 15.01
Ceramics
ASTM C1420-05
Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units Placed in Usage
volume 04.05
ASTM C1421-01b
Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient
Temperature
volume 15.01
Ceramics
ASTM C1422-99(2005)e1
Standard Specification for Chemically Strengthened Flat Glass
volume 15.02
ASTM C1423-98(2003)
Standard Guide for Selecting Jacketing Materials for Thermal Insulation
volume 04.06
ASTM C1424-04
Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
volume 15.01
Ceramics
ASTM C1425-05
Standard Test Method for Interlaminar Shear Strength of 1-D and 2-D Continuous Fiber-Reinforced
Advanced Ceramics at Elevated Temperatures
volume 15.01
Ceramics
ASTM C1426-99(2004)
Standard Practices for Verification and Calibration of Polarimeters
volume 15.02
ASTM C1427-04
Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular
Form
volume 04.06
ASTM C1428-99(2005)
Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source
Multiple Collector Mass Spectrometer Method
volume 12.01
Nuclear Energy (I)
ASTM C1429-99(2004)
Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas
Mass Spectrometer
volume 12.01
Nuclear Energy (I)
ASTM C1430-00
Standard Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M)
in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration
volume 12.01
Nuclear Energy (I)
ASTM C1431-99(2005)
Standard Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository
Disposal
volume 12.01
Nuclear Energy (I)
ASTM C1432-03
Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix
Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
volume 12.01
Nuclear Energy (I)
ASTM C1433-04e1
Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and
Sewers
volume 04.05
ASTM
C1404/C1404M98(2003)
Strona 59
ASTM C1433M-04e1
Sewers [Metric]
volume 04.05
ASTM C1435/C1435M-06
Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
volume 04.02
ASTM C1436-99(2004)
Standard Specification for Materials for Shotcrete
volume 04.02
ASTM C1437-01
Standard Test Method for Flow of Hydraulic Cement Mortar
volume 04.01
ASTM C1438-99(2005)e1
Standard Specification for Latex and Powder Polymer Modifiers for Hydraulic Cement Concrete and Mortar
volume 04.02
ASTM C1439-99e1
Standard Test Methods for Polymer-Modified Mortar and Concrete
volume 04.02
ASTM C1440-03
Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent
(DWV), Sewer, Sanitary and Storm Plumbing Systems
volume 01.02
ASTM C1441-04
Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and FluorineContaining Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
volume 12.01
Nuclear Energy (I)
ASTM C1442-06
Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
volume 04.07
Dimension Stone
ASTM C1443-99(2005)
Standard Specification for Glasses, Portlight, Circular, Fully Tempered
volume 15.02
ASTM C1445-99(2005)
Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
volume 15.01
Ceramics
ASTM C1446-99
Standard Test Method for Measuring Consistency and Working Time of Self-Flowing Castable Refractories
volume 15.01
Ceramics
ASTM C1447/C1447M-04e1
Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
volume 04.05
ASTM C1448/C1448M-05
Standard Specification for Non-Asbestos Fiber-Cement Conduit
volume 04.05
ASTM C1449/C1449M-05a
Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
volume 04.05
ASTM C1450/C1450M-04
Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
volume 04.05
ASTM C1451-05
Standard Practice for Determining Uniformity of Ingredients of Concrete From a Single Source
volume 04.02
ASTM C1452-00
Standard Specification for Reinforced Autoclaved Aerated Concrete Elements
volume 04.05
ASTM C1453-00
Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic
Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets
volume 12.01
Nuclear Energy (I)
ASTM C1454-00
Standard Guide for Pyrophoricity/Combustibility Testing in Support of Pyrophoricity Analyses of Metallic
Uranium Spent Nuclear Fuel
volume 12.01
Nuclear Energy (I)
ASTM C1455-00
Standard Guide for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray
Spectroscopic Methods
volume 12.01
Nuclear Energy (I)
ASTM C1456-00
Standard Test Method for the Determination of Uranium or Gadolinium, or Both, in Gadolinium OxideUranium Oxide Pellets or by X-Ray Fluorescence (XRF)
volume 12.01
Nuclear Energy (I)
ASTM C1457-00(2005)
Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and
Pellets by Carrier Gas Extraction
volume 12.01
Nuclear Energy (I)
ASTM C1458-00
Standard Test Method for Nondestructive Assay of Plutonium, Tritium and 241Am by Calorimetric Assay
volume 12.01
Nuclear Energy (I)
ASTM C1459-04e1
Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and
Slate Roofing Systems
volume 04.05
ASTM C1460-04
Standard Specification for Shielded Transition Couplings for Use With Dissimilar DWV Pipe and Fittings
Above Ground
volume 01.02
ASTM C1461-02
Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for
Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below
Ground Use
volume 01.02
ASTM C1462-00(2005)
Standard Specification for Uranium Metal Enriched to More than 15% and Less Than 20%235U
volume 12.01
Nuclear Energy (I)
ASTM C1463-00
Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and
Radiochemical Analysis
volume 12.01
Nuclear Energy (I)
ASTM C1464-00
Standard Specification for Bent Glass
volume 15.02
ASTM C1465-00(2006)
Constant Stress-Rate Flexural Testing at Elevated Temperatures
volume 15.01
Ceramics
ASTM C1466-00
Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and
Cadmium Extracted from Ceramic Foodware
volume 15.02
C1467/C1467MASTM
00(2006)
Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts
volume 04.01
ASTM C1468-06
Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced
Ceramics at Ambient Temperature
volume 15.01
Ceramics
ASTM C1469-00(2005)
Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
volume 15.01
Ceramics
ASTM C1470-06
Standard Guide for Testing the Thermal Properties of Advanced Ceramics
volume 15.01
Ceramics
ASTM C1471-05
Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing
Membrane on Vertical Surfaces
volume 04.07
Dimension Stone
ASTM C1472-06
Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
volume 04.07
Dimension Stone
ASTM C1473-05
Standard Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1474-00
Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by
Quadrupole Inductively Coupled Plasma-Mass Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1475-05
Standard Guide for Determination of Neptunium-237 in Soil
volume 12.01
Nuclear Energy (I)
ASTM C1476-06
Standard Test Method for Analysis of Urin for Technetium-99 by Inductively Coupled Plasma-Mass
Spectrometry
volume 12.01
Nuclear Energy (I)
Strona 60
ASTM C1477-00
Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafloride by Multi-Collector,
Inductively Coupled Plasma-Mass Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1478-06
Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer
Structures, Pipes, and Laterals
volume 04.05
ASTM C1478M-03(2006)
Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer
Structures, Pipes, and Laterals [Metric]
volume 04.05
ASTM C1479-01
Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard
Installations
volume 04.05
ASTM C1480-00(2005)
Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete
Application
volume 04.02
ASTM C1481-00(2006)
Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
volume 04.07
Dimension Stone
ASTM C1482-04
Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
volume 04.06
ASTM C1483-04
Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
volume 04.06
ASTM C1484-01
Standard Specification for Vacuum Insulation Panels
volume 04.06
ASTM C1485-06
Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant
Heat Energy Source
volume 04.06
ASTM C1486-00
Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor
Surfacings
volume 04.05
ASTM C1487-02
Standard Guide for Remedying Structural Silicone Glazing
volume 04.07
Dimension Stone
ASTM C1488-04
Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation
volume 04.06
ASTM C1489-01
Standard Specification for Lime Putty for Structural Purposes
volume 04.01
ASTM C1490-04
Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel
volume 12.01
Nuclear Energy (I)
ASTM C1491-03
Standard Specification for Concrete Roof Pavers
volume 04.05
ASTM C1492-03
Standard Specification for Concrete Roof Tile
volume 04.05
ASTM C1493-01
Standard Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active
Neutron Counting Using a Differential Die-Away System
volume 12.01
Nuclear Energy (I)
ASTM C1494-01
Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon
Nitride Powder
volume 15.01
Ceramics
ASTM C1495-01
Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
volume 15.01
Ceramics
ASTM C1496-01
Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
volume 04.07
Dimension Stone
ASTM C1497-04
Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
volume 04.06
ASTM C1498-04a
Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
volume 04.06
ASTM C1499-05
Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient
Temperature
volume 15.01
Ceramics
ASTM C1500-02
Standard Test Method for Nondestructive Assay of Plutonium by Passive Neutron Multiplicity Counting
volume 12.01
Nuclear Energy (I)
ASTM C1501-04
Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory
Accelerated Weathering Procedures
volume 04.07
Dimension Stone
ASTM C1502-01
Standard Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium
Oxide
volume 12.01
Nuclear Energy (I)
ASTM C1503-01
Standard Specification for Silvered Flat Glass Mirror
volume 15.02
ASTM C1504-04e1
Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts,
Storm Drains
volume 04.05
ASTM C1504M-04e1
Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts,
Storm Drains (Metric)
volume 04.05
ASTM C1505-01
Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
volume 15.02
ASTM C1506-03
Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
volume 04.01
ASTM C1507-01
Standard Test Method for Radiochemical Determination of Strontium-90 in Soil
volume 12.01
Nuclear Energy (I)
ASTM C1508-01
Standard Test Method for Determination of Bromine and Chlorine in UF6and Uranyl Nitrate by X-Ray
Fluorescence (XRF) Spectroscopy
volume 12.01
Nuclear Energy (I)
ASTM C1509-02
Standard Specification for Beaded Process Glass Pipe and Fittings
volume 15.02
ASTM C1510-01
Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
volume 15.02
ASTM C1511-04
Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Glass Fiber
Insulation (Aircraft Type)
volume 04.06
ASTM C1512-01
Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal
Performance of Insulation Products
volume 04.06
ASTM C1513-04
Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
volume 04.01
ASTM C1514-02
Standard Test Method for Measurement of 235U Fraction using the Enrichment Meter Principle
volume 12.01
Nuclear Energy (I)
ASTM C1515-01
Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing
volume 04.07
Dimension Stone
ASTM C1516-05
Standard Practice for Application of Direct-Applied Exterior Finish Systems
volume 04.01
ASTM C1517-02
Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc
Emission Spectroscopy
volume 12.01
Nuclear Energy (I)
Strona 61
ASTM C1518-04
Standard Specification for Precured Elastomeric Silicone Joint Sealants
volume 04.07
Dimension Stone
ASTM C1519-04
Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated
Weathering Procedures
volume 04.07
Dimension Stone
ASTM C1520-02
Standard Guide for Paintability of Latex Sealants
volume 04.07
Dimension Stone
ASTM C1521-02a
Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
volume 04.07
Dimension Stone
ASTM C1522-05
Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing
Membranes
volume 04.07
Dimension Stone
ASTM C1523-04
Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric
Joint Sealants
volume 04.07
Dimension Stone
ASTM C1524-02a
Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)
volume 04.02
ASTM C1525-04
Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water
Quenching
volume 15.01
Ceramics
ASTM C1526-03
Standard Specification for Serpentine Dimension Stone
volume 04.07
Dimension Stone
ASTM C1527-03
Standard Specification for Travertine Dimension Stone
volume 04.07
Dimension Stone
ASTM C1528-02
Standard Guide for Selection of Dimension Stone for Exterior Use
volume 04.07
Dimension Stone
ASTM C1529-02a
Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
volume 04.01
ASTM C1530-04
Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed
Varying Profiles and Thicknesses
volume 04.05
ASTM C1531-03
Standard Test Methods for In Situ Measurement Of Masonry Mortar Joint Shear Strength Index
volume 04.05
ASTM C1532-05
Standard Practice for Selection, Removal, and Shipment of Masonry Specimens from Existing Construction
volume 04.05
ASTM C1533-02
Standard Guide for General Design Considerations for Hot Cell Equipment
volume 12.01
Nuclear Energy (I)
ASTM C1534-04
Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound
Absorbing Liner for Duct Systems
volume 04.06
ASTM C1535-05
Standard Practice for Application of Exterior Insulation and Finish Systems Class PI
volume 04.01
ASTM C1536-03
Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
volume 04.07
Dimension Stone
ASTM C1539-02
Standard Test Method for Determination of Technetium-99 in Uranium Hexafluoride by Liquid Scintillation
Counting
volume 12.01
Nuclear Energy (I)
ASTM C1540-04
Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
volume 01.02
ASTM C1541-04
Standard Specification for Shielded Transition Couplings Using Flexible Poly Vinyl Chloride (PVC) Gaskets
to Connect Dissimilar DWV Pipe and Fittings
volume 01.02
ASTM C1542/C1542M-02
Standard Test Method for Measuring Length of Concrete Cores
volume 04.02
ASTM C1543-02
Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding
volume 04.02
ASTM C1545-02
Practice for Dispersing Pigments and Other Materials into Water-Based Suspensions with a High Intensity
Mixer
volume 15.02
ASTM C1546-02
Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems
volume 04.01
ASTM C1547-02
Standard Classification for Fusion-Cast Refractory Blocks and Shapes
volume 15.01
Ceramics
ASTM C1548-02
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio of Refractory
Materials by Impulse Excitation of Vibration
volume 15.01
Ceramics
ASTM C1549-04
Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable
Solar Reflectometer
volume 04.06
ASTM C1550-05
Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round
Panel)
volume 04.02
ASTM C1552-03a
Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression
Testing
volume 04.05
ASTM C1554-03
Standard Guide for Materials Handling Equipment for Hot Cells
volume 12.01
Nuclear Energy (I)
ASTM C1555-03a
Standard Practice for Autoclaved Aerated Concrete Masonry
volume 04.05
ASTM C1556-04
Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures
by Bulk Diffusion
volume 04.02
ASTM C1557-03e1
Standard Test Method for Tensile Strength and Young's Modulus of Fibers
volume 15.01
Ceramics
ASTM C1558-03
Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission
Test Data for Thermal Insulation
volume 04.06
ASTM C1559-04
Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type)
volume 04.06
ASTM C1560-03
Standard Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based
Composites
volume 04.05
ASTM C1561-03
Standard Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride by Alpha
Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1562-03e1
Standard Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry
Storage Systems
volume 12.01
Nuclear Energy (I)
ASTM C1563-04
Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and
Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications
volume 01.02
ASTM C1564-04
Standard Guide for Use of Silicone Sealants for Protective Glazing Systems
volume 04.07
Dimension Stone
ASTM C1565-04
Standard Test Method for Determination of Pack-Set Index of Portland Cement
volume 04.01
Strona 62
ASTM C1567-04
Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious
Materials and Aggregate (Accelerated Mortar-Bar Method)
volume 04.02
ASTM C1568-05
Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance
Method)
volume 04.05
ASTM C1569-03
Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)
volume 04.05
ASTM C1570-03
Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles(Air Permeability Method)
volume 04.05
ASTM C1571-03
Standard Guide for Characterization of Radioactive and/or Hazardous Wastes for Thermal Treatment
volume 12.01
Nuclear Energy (I)
ASTM C1572-04
Standard Guide for Dry Lead Glass and Oil-Filled Lead Glass Radiation Shielding Window Components for
Remotely Operated Facilities
volume 12.01
Nuclear Energy (I)
ASTM C1574-04
Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal
Insulation
volume 04.06
ASTM C1576-05
Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
volume 15.01
Ceramics
ASTM C1577-05
Sewers Designed According to AASHTO LRFD
volume 04.05
ASTM C1579-06
Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete
(Using a Steel Form Insert)
volume 04.02
ASTM C1580-05
Standard Test Method for Water-Soluble Sulfate in Soil
volume 04.02
ASTM C1581-04
Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar
and Concrete under Restrained Shrinkage
volume 04.02
ASTM C1582/C1582M-04
Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
volume 04.02
ASTM C1583-04
Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength
of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
volume 04.02
ASTM C1585-04
Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
volume 04.02
ASTM C1586-05
Standard Guide for Quality Assurance of Mortars
volume 04.05
ASTM C1587-05a
Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Assemblies for
Compressive Strength Testing
volume 04.05
ASTM C1589-05
Standard Practice for Outdoor Weathering of Construction Seals and Sealants
volume 04.07
Dimension Stone
ASTM C1590-04
Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1591-04
Standard Test Method for Determination of the Modulus of Elasticity of AAC
volume 04.05
ASTM C1592-04
Standard Guide for Nondestructive Assay Measurements
volume 12.01
Nuclear Energy (I)
ASTM C1594-04
Standard Specification for Polyimide Rigid Cellular Thermal Insulation
volume 04.06
ASTM C1597M-04
Standard Specification for Gypsum Wallboard (Hard Metric Sizes)
volume 04.01
ASTM C1601-05
Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
volume 04.05
ASTM C1602/C1602M-06
Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
volume 04.02
ASTM C1603-05a
Standard Test Method for Measurement of Solids in Water
volume 04.02
ASTM C1604/C1604M-05
Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete
volume 04.02
ASTM C1605-04
Standard Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive
X-Ray Fluorescence Spectrometry
volume 15.02
ASTM C1606-04
Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
volume 15.02
ASTM C1608-05
Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste
volume 04.01
ASTM C1609/C1609M-05
Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point
Loading)
volume 04.02
ASTM C1610/C1610M-06
Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
volume 04.02
ASTM C1611/C1611M-05
Standard Test Method for Slump Flow of Self-Consolidating Concrete
volume 04.02
ASTM C1614-05
Standard Practice for the Determination of 237Np, 232Th, 235U and 238U in Urine by Inductively Coupled
Plasma-Mass Spectrometry (ICP-MS) and Gamma Ray Spectrometry.
volume 12.01
Nuclear Energy (I)
ASTM C1615-05
Standard Guide for Mechanical Drive Systems for Remote Operation in Hot Cell Facilities
volume 12.01
Nuclear Energy (I)
ASTM C1616-05
Standard Test Method for Determining the Moisture Content of Inorganic Insulation Materials by Weight
volume 04.06
ASTM C1617-05
Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions
Leached from Thermal Insulation on Aqueous Corrosion of Metals
volume 04.06
ASTM C1618-05
Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure
volume 04.05
ASTM C1618M-05
Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure
[Metric]
volume 04.05
ASTM C1619-05
Standard Specification for Elastomeric Seals for Joining Concrete Structures
volume 04.05
ASTM C1620-05
Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
volume 04.07
Dimension Stone
ASTM C1621/C1621M-06
Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
volume 04.02
Strona 63
ASTM C1622/C1622M-05
Standard Specification for Cold-Weather Admixture Systems
volume 04.02
ASTM C1623-05
Standard Specification for Manufactured Concrete Masonry Lintels
volume 04.05
ASTM C1624-05
Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by
Quantitative Single Point Scratch Testing
volume 15.01
Ceramics
ASTM C1625-05
Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal
Ionization Mass Spectrometry
volume 12.01
Nuclear Energy (I)
ASTM C1629/C1629M-05
Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and FiberReinforced Cement Panels
volume 04.01
ASTM C1630-06
Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
volume 04.06
ASTM C1631-05
Standard Specification for Cellular Polypropylene Thermal Insulation
volume 04.06
ASTM C1635-06
Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
volume 04.07
Dimension Stone
ASTM C1636-06
Standard Guide for the Determination of Uranium-232 in Uranium Hexafluoride
volume 12.01
Nuclear Energy (I)
ASTM D4-86(2004)
Standard Test Method for Bitumen Content
volume 04.04
Roofing and Waterproofing
ASTM D5-05a
Standard Test Method for Penetration of Bituminous Materials
volume 04.03
Road and Paving Materials; Vehicle-Pavement
Systems
ASTM D6-95(2000)e1
Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds
volume 04.04
ASTM D8-02
Standard Terminology Relating to Materials for Roads and Pavements
volume 04.03
Systems
ASTM D9-05
Standard Termninology Relating to Wood and Wood-Based Products
volume 04.10
Wood
ASTM D12-88(1998)
Standard Specification for Raw Tung Oil
volume 06.03
Paint - Pigments, Drying Oils, Polymers,
Resins, Naval Stores, Cellulosic Esters, and Ink
Vehicles
ASTM D13-02
Standard Specification for Spirits of Turpentine
volume 06.03
Vehicles
ASTM D16-03
Standard Terminology for Paint, Related Coatings, Materials, and Applications
volume 06.01
Paint - Tests for Chemical, Physical, and
Optical Properties; Appearance
ASTM D20-03
Standard Test Method for Distillation of Road Tars
volume 04.03
Systems
ASTM D25-99(2005)
Standard Specification for Round Timber Piles
volume 04.10
Wood
ASTM D34-91(2003)
Standard Guide for Chemical Analysis of White Pigments
volume 06.03
Vehicles
ASTM D36-95(2000)e1
Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
volume 04.04
ASTM D38-94(2000)e1
Standard Test Methods for Sampling Wood Preservatives Prior to Testing
volume 04.10
Wood
ASTM D41-05
Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing
volume 04.04
ASTM D43-00
Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing
volume 04.04
ASTM D49-83(2002)
Standard Test Methods of Chemical Analysis of Red Lead
volume 06.03
Vehicles
ASTM D50-90(2005)
Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron
and Manganese
volume 06.03
Vehicles
ASTM D56-05
Standard Test Method for Flash Point by Tag Closed Cup Tester
volume 05.01
Petroleum Products and Lubricants (I): D56 D3230
ASTM D61-75(2004)
Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)
volume 05.01
ASTM D69-01
Standard Test Methods for Friction Tapes
volume 10.01
Electrical Insulation (I): D69 - D2484
ASTM D70-03
Standard Test Method for Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer
Method)
volume 04.03
Systems
ASTM D71-94(2004)
Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
volume 05.01
ASTM D75-03
Standard Practice for Sampling Aggregates
volume 04.03
Systems
ASTM D76-99(2005)
Standard Specification for Tensile Testing Machines for Textiles
volume 07.01
Textiles (I): D76 - D4391
ASTM D79-86(2004)
Standard Specification for Zinc Oxide Pigments
volume 06.03
Vehicles
ASTM D81-87(2003)
Standard Specification for Basic Carbonate White Lead Pigment
volume 06.03
Vehicles
ASTM D83-84(2002)
Standard Specification for Red Lead Pigment
volume 06.03
Vehicles
ASTM D85-05
Standard Specification for Ochre Pigment
volume 06.03
Vehicles
ASTM D86-05
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
volume 05.01
ASTM D87-04
Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
volume 05.01
ASTM D88-94(2005)
Standard Test Method for Saybolt Viscosity
volume 04.04
ASTM D91-02
Standard Test Method for Precipitation Number of Lubricating Oils
volume 05.01
ASTM D92-05a
Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
volume 05.01
ASTM D93-02a
Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
volume 05.01
ASTM D94-02
Standard Test Methods for Saponification Number of Petroleum Products
volume 05.01
ASTM D95-05e1
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
volume 05.01
ASTM D97-05a
Standard Test Method for Pour Point of Petroleum Products
volume 05.01
Strona 64
ASTM D98-05
Standard Specification for Calcium Chloride
volume 04.03
Systems
ASTM D113-99
Standard Test Method for Ductility of Bituminous Materials
volume 04.03
Systems
ASTM D115-02
Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
volume 10.01
ASTM D116-86(1999)
Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications
volume 15.02
ASTM D117-02
Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum
Origin
volume 10.03
Electrical Insulating Liquids and Gases;
Electrical Protective Equipment
ASTM D120-02a
Standard Specification for Rubber Insulating Gloves
volume 10.03
ASTM D124-88(1998)
Standard Specification for Degummed Soybean Oil
volume 06.03
Vehicles
ASTM D126-87(2002)
Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and
Chromium Oxide Green
volume 06.03
Vehicles
ASTM D127-05
Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
volume 05.01
ASTM D128-98(2003)e1
Standard Test Methods for Analysis of Lubricating Grease
volume 05.01
ASTM D129-00(2005)
Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
volume 05.01
ASTM D130-04e1
Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
volume 05.01
ASTM D139-95(2001)e1
Standard Test Method for Float Test for Bituminous Materials
volume 04.03
Systems
ASTM D140-01
Standard Practice for Sampling Bituminous Materials
volume 04.03
Systems
ASTM D143-94(2000)e1
Standard Test Methods for Small Clear Specimens of Timber
volume 04.10
Wood
ASTM D146-04
Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing
and Waterproofing
volume 04.04
ASTM D149-97a(2004)
Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating
Materials at Commercial Power Frequencies
volume 10.01
ASTM D150-98(2004)
Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical
Insulation
volume 10.01
ASTM D153-84(2003)
Standard Test Methods for Specific Gravity of Pigments
volume 06.03
Vehicles
ASTM D154-85(2001)
Standard Guide for Testing Varnishes
volume 06.03
Vehicles
ASTM D156-02e1
Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
volume 05.01
ASTM D167-93(2004)e1
Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke
volume 05.06
Gaseous Fuels; Coal and Coke
ASTM D168-94(2000)
Standard Test Method for Coke Residue of Creosote
volume 04.10
Wood
ASTM D173-03
Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing
volume 04.04
ASTM D176-00
Standard Test Methods for Solid Filling and Treating Compounds Used for Electrical Insulation
volume 10.01
ASTM D178-01(2005)
Standard Specification for Rubber Insulating Matting
volume 10.03
ASTM D185-84(1999)
Standard Test Methods for Coarse Particles in Pigments, Pastes, and Paints
volume 06.03
Vehicles
ASTM D187-94(2003)e1
Standard Test Method for Burning Quality of Kerosine
volume 05.01
ASTM D189-05
Standard Test Method for Conradson Carbon Residue of Petroleum Products
volume 05.01
ASTM D197-87(2002)
Standard Test Method for Sampling and Fineness Test of Pulverized Coal
volume 05.06
ASTM D198-05a
Standard Test Methods of Static Tests of Lumber in Structural Sizes
volume 04.10
Wood
ASTM D202-97(2002)e1
Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
volume 10.01
ASTM D204-02
Standard Test Methods for Sewing Threads
volume 07.01
ASTM D209-81(2003)
Standard Specification for Lampblack Pigment
volume 06.03
Vehicles
ASTM D210-05
Standard Specification for Bone Black Pigment
volume 06.03
Vehicles
ASTM D211-67(2002)
Standard Specification for Chrome Yellow and Chrome Orange Pigments
volume 06.03
Vehicles
ASTM D217-02
Standard Test Methods for Cone Penetration of Lubricating Grease
volume 05.01
ASTM D225-04
Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
volume 04.04
ASTM D226-05
Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
volume 04.04
ASTM D227-03
Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
volume 04.04
ASTM D228-05b
Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and
Shingles Used in Roofing and Waterproofing
volume 04.04
ASTM D229-01
Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
volume 10.01
ASTM D233-02
Standard Test Methods of Sampling and Testing Turpentine
volume 06.03
Vehicles
ASTM D234-82(1998)
Standard Specification for Raw Linseed Oil
volume 06.03
Vehicles
ASTM D235-02
Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
volume 06.04
Paint - Solvents; Aromatic Hydrocarbons
ASTM D240-02
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
volume 05.01
ASTM D242-04
Standard Specification for Mineral Filler For Bituminous Paving Mixtures
volume 04.03
Systems
Strona 65
ASTM D243-02
Standard Test Method for Residue of Specified Penetration
volume 04.03
Systems
ASTM D244-04
Standard Test Methods and Practices for Emulsified Asphalts
volume 04.03
Systems
ASTM D245-06
Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded
Lumber
volume 04.10
Wood
ASTM D246-04a
Standard Test Method for Distillation of Creosote and Creosote-Coal Tar Solutions
volume 04.10
Wood
ASTM D256-06
Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
volume 08.01
Plastics (I): D256 - D3159
ASTM D257-99(2005)
Standard Test Methods for DC Resistance or Conductance of Insulating Materials
volume 10.01
ASTM D260-86(2001)
Standard Specification for Boiled Linseed Oil
volume 06.03
Vehicles
ASTM D261-75(1999)
Standard Specification for Iron Blue Pigment
volume 06.03
Vehicles
ASTM D262-81(1999)
Standard Specification for Ultramarine Blue Pigment
volume 06.03
Vehicles
ASTM D263-05
Standard Specification for Chrome Oxide Green Pigment
volume 06.03
Vehicles
ASTM D267-82(2003)
Standard Specification for Gold Bronze Powder
volume 06.03
Vehicles
ASTM D268-01
Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and
Related Coatings and Material
volume 06.04
ASTM D269-97(2002)
Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives
volume 06.03
Vehicles
ASTM D276-00a
Standard Test Methods for Identification of Fibers in Textiles
volume 07.01
ASTM D279-02
Standard Test Methods for Bleeding of Pigments
volume 06.03
Vehicles
ASTM D280-01
Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in
Pigments
volume 06.03
Vehicles
ASTM D281-95(2002)
Standard Test Method for Oil Absorption of Pigments by Spatula Rub-out
volume 06.01
ASTM D283-84(1999)
Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments
volume 06.03
Vehicles
ASTM D287-92(2000)e1
Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
volume 05.01
ASTM D291-86(2002)
Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal
volume 05.06
ASTM D293-93(2004)
Standard Test Method for the Sieve Analysis of Coke
volume 05.06
ASTM D295-99(2004)
Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation
volume 10.01
ASTM D297-93(2002)e2
Standard Test Methods for Rubber Products-Chemical Analysis
volume 09.01
Rubber, Natural and Synthetic - General Test
Methods; Carbon Black
ASTM D299-04e1
Standard Specification for Asbestos Yarns
volume 04.05
ASTM D301-95(2004)
Standard Test Methods for Soluble Cellulose Nitrate
volume 06.03
Vehicles
ASTM D304-05
Standard Specification for n-Butyl Alcohol (Butanol)
volume 06.04
ASTM D305-84(2003)
Standard Test Method for Solvent-Extractable Material in Black Pigments
volume 06.03
Vehicles
ASTM D312-00
Standard Specification for Asphalt Used in Roofing
volume 04.04
ASTM D315-95(2004)e1
Standard Specification for Woven Asbestos Tape
volume 04.05
ASTM D319-04
Standard Specification for Amyl Alcohol (Synthetic)
volume 06.04
ASTM D322-97(2002)e1
Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation
volume 05.01
ASTM D323-99a
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
volume 05.01
ASTM D329-02
Standard Specification for Acetone
volume 06.04
ASTM D330-93(2001)
Standard Specification for 2-Butoxyethanol
volume 06.04
ASTM D331-05
Standard Specification for 2-Ethoxyethanol
volume 06.04
ASTM D332-87(2004)
Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation
volume 06.01
ASTM D333-01
Standard Guide for Clear and Pigmented Lacquers
volume 06.02
Paint - Products and Applications; Protective
Coatings; Pipeline Coatings
ASTM D341-03
Standard Viscosity-Temperature Charts for Liquid Petroleum Products
volume 05.01
ASTM D344-97(2004)
Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
volume 06.01
ASTM D345-02
Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications
volume 04.03
Systems
ASTM D346-04e1
Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
volume 05.06
ASTM D347-04
Standard Tables for Volume and Specific Gravity Correction for Creosote, Creosote-Coal Tar Solution and
Coal Tar
volume 04.10
Wood
ASTM D348-00
Standard Test Methods for Rigid Tubes Used for Electrical Insulation
volume 10.01
ASTM D349-99(2004)
Standard Test Methods for Laminated Round Rods Used for Electrical Insulation
volume 10.01
ASTM D350-01
Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
volume 10.01
ASTM D351-97(2003)
Standard Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality
volume 10.01
ASTM D352-97(2003)
Standard Test Methods for Pasted Mica Used in Electrical Insulation
volume 10.01
Strona 66
ASTM D358-98
Standard Specification for Wood to Be Used as Panels in Weathering Tests of Coatings
volume 06.02
ASTM D360-89(2001)
Standard Specification for Shellac Varnishes
volume 06.03
Vehicles
ASTM D365-01(2005)
Standard Guide for Soluble Nitrocellulose Base Solutions
volume 06.02
ASTM D367-94(2000)e1
Standard Test Method for Xylene-Insoluble Matter in Creosote
volume 04.10
Wood
ASTM D368-89(2002)
Standard Test Method for Specific Gravity of Creosote and Oil-Type Preservatives
volume 04.10
Wood
ASTM D369-84(2002)
Standard Test Method for Specific Gravity of Creosote Fractions and Residue
volume 04.10
Wood
ASTM D370-02e1
Standard Practice for Dehydration of Oil-Type Preservatives
volume 04.10
Wood
ASTM D372-00
Standard Specification for Flexible Treated Sleeving Used for Electrical Insulation
volume 10.01
ASTM D374-99(2004)
Standard Test Methods for Thickness of Solid Electrical Insulation
volume 10.01
ASTM D374M-99(2005)
Standard Test Methods for Thickness of Solid Electrical Insulation (Metric)
volume 10.01
ASTM D375-95(2004)e1
Standard Specification for Asbestos Roving
volume 04.05
ASTM D378-00
Standard Test Methods for Rubber (Elastomeric) Belting, Flat Type
volume 09.02
Rubber Products, Industrial - Specifications and
Related Test Methods; Gaskets; Tires
ASTM D380-94(2006)
Standard Test Methods for Rubber Hose
volume 09.02
ASTM D381-04
Standard Test Method for Gum Content in Fuels by Jet Evaporation
volume 05.01
ASTM D387-00
Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller
volume 06.01
ASTM D388-05
Standard Classification of Coals by Rank
volume 05.06
ASTM D390-92(1999)
Standard Specification for Coal-Tar Creosote for the Preservative Treatment of Piles, Poles, and Timbers for
Marine, Land, and Freshwater Use
volume 04.10
Wood
ASTM D391-94(2000)e1
Standard Specification for Creosote-Coal Tar Solution
volume 04.10
Wood
ASTM D395-03
Standard Test Methods for Rubber Property—Compression Set
volume 09.01
ASTM D396-05
Standard Specification for Fuel Oils
volume 05.01
ASTM D402-02
Standard Test Method for Distillation of Cut-Back Asphaltic (Bituminous) Products
volume 04.03
Systems
ASTM D409-02
Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
volume 05.06
ASTM D411-98(2003)
Standard Test Methods for Shellac Used for Electrical Insulation
volume 10.01
ASTM D412-98a(2002)e1
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
volume 09.01
ASTM D413-98(2002)e1
Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate
volume 09.01
ASTM D420-98(2003)
Standard Guide to Site Characterization for Engineering, Design, and Construction Purposes
volume 04.08
Soil and Rock (I): D420 – D5611
ASTM D421-85(2002)
Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil
Constants
volume 04.08
ASTM D422-63(2002)
Standard Test Method for Particle-Size Analysis of Soils
volume 04.08
ASTM D425-88(2001)
Standard Test Method for Centrifuge Moisture Equivalent of Soils
volume 04.08
ASTM D427-04
Test Method for Shrinkage Factors of Soils by the Mercury Method
volume 04.08
ASTM D429-03e1
Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
volume 09.01
ASTM D430-06
Standard Test Methods for Rubber Deterioration-Dynamic Fatigue
volume 09.01
ASTM D440-86(2002)
Standard Test Method of Drop Shatter Test for Coal
volume 05.06
ASTM D441-86(2002)
Standard Test Method of Tumbler Test for Coal
volume 05.06
ASTM D444-88(2003)
Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
volume 06.03
Vehicles
ASTM D445-04e2
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of
Dynamic Viscosity)
volume 05.01
ASTM D446-04
Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
volume 05.01
ASTM D448-03a
Standard Classification for Sizes of Aggregate for Road and Bridge Construction
volume 04.03
Systems
ASTM D449-03
Standard Specification for Asphalt Used in Dampproofing and Waterproofing
volume 04.04
ASTM D450-96(2000)e1
Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing
volume 04.04
ASTM D451-91(2002)
Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
volume 04.04
ASTM D452-91(2002)
Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
volume 04.04
ASTM D453-94(2000)e1
Standard Test Method for Tar Acids in Creosote-Coal Tar Solutions
volume 04.10
Wood
ASTM D454-04
Standard Test Method for Rubber Deterioration by Heat and Air Pressure
volume 09.01
ASTM D459-00
Standard Terminology Relating to Soaps and Other Detergents
volume 15.04
Soaps and Other Detergents; Polishes;
Leather; Resilient Floor Coverings
ASTM D460-91(2005)
Standard Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products
volume 15.04
ASTM D464-05
Standard Test Methods for Saponification Number of Naval Store Products Including Tall Oil and Other
Related Products
volume 06.03
Vehicles
ASTM D465-05
Standard Test Methods for Acid Number of Naval Stores Products Including Tall Oil and Other Related
Products
volume 06.03
Vehicles
ASTM D470-05
Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
volume 10.01
ASTM D471-98e2
Standard Test Method for Rubber Property-Effect of Liquids
volume 09.01
ASTM D473-02
Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
volume 05.01
Strona 67
ASTM D478-02
Standard Specification for Zinc Yellow (Zinc Chromate) Pigments
volume 06.03
Vehicles
ASTM D480-88(2003)
Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
volume 06.03
Vehicles
ASTM D482-03
Standard Test Method for Ash from Petroleum Products
volume 05.01
ASTM D483-04
Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
volume 05.01
ASTM D490-92(2005)
Standard Specification for Road Tar
volume 04.03
Systems
ASTM D494-04
Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products
volume 08.01
ASTM D495-99(2004)
Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
volume 10.01
ASTM D500-95(2003)
Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils
volume 15.04
ASTM D501-03
Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents
volume 15.04
ASTM D502-89(2003)
Standard Test Method for Particle Size of Soaps and Other Detergents
volume 15.04
ASTM D509-05
Standard Test Methods of Sampling and Grading Rosin
volume 06.03
Vehicles
ASTM D511-03
Standard Test Methods for Calcium and Magnesium In Water
volume 11.01
Water (I)
ASTM D512-04
Standard Test Methods for Chloride Ion In Water
volume 11.01
Water (I)
ASTM D513-02
Standard Test Methods for Total and Dissolved Carbon Dioxide in Water
volume 11.01
Water (I)
ASTM D516-02
Standard Test Method for Sulfate Ion in Water
volume 11.01
Water (I)
ASTM D517-98(2003)
Standard Specification for Asphalt Plank
volume 04.03
Systems
ASTM D519-04
Standard Test Method for Length of Fiber in Wool Top
volume 07.01
ASTM D521-02
Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)
volume 06.03
Vehicles
ASTM D522-93a(2001)
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
volume 06.01
ASTM D523-89(1999)
Standard Test Method for Specular Gloss
volume 06.01
ASTM D524-04
Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
volume 05.01
ASTM D525-05
Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
volume 05.01
ASTM D528-97(2002)
Standard Test Method for Machine Direction of Paper and Paperboard
volume 15.09
Paper; Packaging; Flexible Barrier Materials;
Business Imaging Products
ASTM D529-04
Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials
volume 04.04
ASTM D531-00(2005)
Standard Test Method for Rubber Property-Pusey and Jones Indentation
volume 09.01
ASTM D542-00
Standard Test Method for Index of Refraction of Transparent Organic Plastics
volume 08.01
ASTM D543-06
Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
volume 08.01
ASTM D545-99(2005)
Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and
Resilient Types)
volume 04.03
Systems
ASTM D546-05
Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
volume 04.03
Systems
ASTM D548-97(2002)
Standard Test Method for Water-Soluble Acidity or Alkalinity of Paper
volume 15.09
ASTM D555-84(1998)
Standard Guide for Testing Drying Oils
volume 06.03
Vehicles
ASTM D558-04
Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
volume 04.08
ASTM D559-03
Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
volume 04.08
ASTM D560-03
Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
volume 04.08
ASTM D561-82(2003)
Standard Specification for Carbon Black Pigment for Paint
volume 06.03
Vehicles
ASTM D562-01(2005)
Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type
Viscometer
volume 06.01
ASTM D564-87(2002)
Standard Test Methods for Liquid Paint Driers
volume 06.01
ASTM D565-99(2005)
Standard Test Method for Carbonizable Substances in White Mineral Oil
volume 05.01
ASTM D566-02
Standard Test Method for Dropping Point of Lubricating Grease
volume 05.01
ASTM D570-98(2005)
Standard Test Method for Water Absorption of Plastics
volume 08.01
ASTM D572-04
Standard Test Method for Rubber—Deterioration by Heat and Oxygen
volume 09.01
ASTM D573-04
Standard Test Method for Rubber—Deterioration in an Air Oven
volume 09.01
ASTM D575-91(2001)
Standard Test Methods for Rubber Properties in Compression
volume 09.01
ASTM D578-05
Standard Specification for Glass Fiber Strands
volume 07.01
ASTM D579-04
Standard Specification for Greige Woven Glass Fabrics
volume 07.01
ASTM D580-04
Standard Specification for Greige Woven Glass Tapes and Webbings
volume 07.01
ASTM D581-99
Standard Specification for Glass Fiber Greige Braided Tubular Sleeving
volume 07.01
ASTM D584-96(2005)
Standard Test Method for Wool Content of Raw Wool-Laboratory Scale
volume 07.01
ASTM D585-97(2002)
Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related
Product
volume 15.09
ASTM D586-97(2002)
Standard Test Method for Ash in Pulp, Paper, and Paper Products
volume 15.09
Strona 68
ASTM D589-97(2002)
Standard Test Method for Opacity of Paper (15°Diffuse Illuminant A, 89% Reflectance Backing and Paper
Backing)
volume 15.09
ASTM D596-01
Standard Guide for Reporting Results of Analysis of Water
volume 11.01
Water (I)
ASTM D600-90(2001)
Standard Specification for Liquid Paint Driers
volume 06.04
ASTM D601-87(1998)
Standard Specification for Oiticica Oil (Permanently Liquid)
volume 06.03
Vehicles
ASTM D602-81(2003)
Standard Specification for Barium Sulfate Pigments
volume 06.03
Vehicles
ASTM D605-82(2003)
Standard Specification for Magnesium Silicate Pigment (Talc)
volume 06.03
Vehicles
ASTM D607-82(2003)
Standard Specification for Wet Ground Mica Pigments
volume 06.03
Vehicles
ASTM D608-05
Standard Specification for Dibutyl Phthalate
volume 06.04
ASTM D609-00
Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion
Coatings, and Related Coating Products
volume 06.01
ASTM D610-01
Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
volume 06.02
ASTM D611-04
Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon
Solvents
volume 05.01
ASTM D612-88(2004)
Standard Test Method for Carbonizable Substances in Paraffin Wax
volume 05.01
ASTM D613-05
Standard Test Method for Cetane Number of Diesel Fuel Oil
volume 05.05
ASTM D618-05
Standard Practice for Conditioning Plastics for Testing
volume 08.01
ASTM D619-99(2004)
Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
volume 10.01
ASTM D622-99(2005)
Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System
volume 09.02
ASTM D623-99e1
Standard Test Methods for Rubber Property-Heat Generation and Flexing Fatigue In Compression
volume 09.01
ASTM D624-00e1
Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
volume 09.01
ASTM D628-95(2004)e1
Standard Specification for Asbestos Tubular Sleeving
volume 04.05
ASTM D629-99
Standard Test Methods for Quantitative Analysis of Textiles
volume 07.01
ASTM D632-01
Standard Specification for Sodium Chloride
volume 04.03
Systems
ASTM D633-97(2005)
Standard Volume Correction Table for Road Tar
volume 04.03
Systems
ASTM D635-06
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal
Position
volume 08.01
ASTM D638-03
Standard Test Method for Tensile Properties of Plastics
volume 08.01
ASTM D642-00(2005)
Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and
Unit Loads
volume 15.09
ASTM D643-97(2002)
Standard Test Method for Folding Endurance of Paper by the Schopper Tester
volume 15.09
ASTM D644-99(2002)
Standard Test Method for Moisture Content of Paper and Paperboard by Oven Drying
volume 15.09
ASTM D645/D645M-97(2002)
Standard Test Method for Thickness of Paper and Paperboard
volume 15.09
ASTM D646-96(2001)
Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
volume 15.09
ASTM D648-06
Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
volume 08.01
ASTM D653-05
Standard Terminology Relating to Soil, Rock, and Contained Fluids
volume 04.08
ASTM D653-05
Standard Terminology Relating to Soil, Rock, and Contained Fluids
volume 04.09
Soil and Rock (II): D5714 - latest
ASTM D660-93(2005)
Standard Test Method for Evaluating Degree of Checking of Exterior Paints
volume 06.01
ASTM D661-93(2005)
Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
volume 06.01
ASTM D662-93(2005)
Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
volume 06.01
ASTM D664-04e1
Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
volume 05.01
ASTM D665-03
Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
volume 05.01
ASTM D668-99(2004)
Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
volume 10.01
ASTM D669-03
Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet
and Plate Materials
volume 10.01
ASTM D685-93(2002)
Standard Practice for Conditioning Paper and Paper Products for Testing
volume 15.09
ASTM D686-93(2002)
Standard Test Methods of Qualitative Examination of Mineral Filler and Mineral Coating of Paper
volume 15.09
ASTM D689-03
Standard Test Method for Internal Tearing Resistance of Paper
volume 15.09
ASTM D692-00(2004)
Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures
volume 04.03
Systems
ASTM D693-03a
Standard Specification for Crushed Aggregate for Macadam Pavements
volume 04.03
Systems
ASTM D695-02a
Standard Test Method for Compressive Properties of Rigid Plastics
volume 08.01
ASTM D696-03
Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C With
a Vitreous Silica Dilatometer
volume 08.01
ASTM D698-00ae1
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ftlbf/ft3(600 kN-m/m3))
volume 04.08
Strona 69
ASTM D704-99(2004)
Standard Specification for Melamine-Formaldehyde Molding Compounds
volume 08.01
ASTM D705-99(2004)
Standard Specification for Urea-Formaldehyde Molding Compounds
volume 08.01
ASTM D706-05
Standard Specification for Cellulose Acetate Molding and Extrusion Compounds
volume 08.01
ASTM D707-05
Standard Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds
volume 08.01
ASTM D709-01
Standard Specification for Laminated Thermosetting Materials
volume 10.01
ASTM D710-97(2002)
Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
volume 10.01
ASTM D711-89(2004)
Standard Test Method for No-Pick-Up Time of Traffic Paint
volume 06.02
ASTM D713-90(2004)
Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials
volume 06.02
ASTM D714-02
Standard Test Method for Evaluating Degree of Blistering of Paints
volume 06.01
ASTM D715-86(2003)
Standard Test Methods for Analysis of Barium Sulfate Pigment
volume 06.03
Vehicles
ASTM D716-86(2003)
Standard Test Methods for Evaluating Mica Pigment
volume 06.03
Vehicles
ASTM D717-86(2003)
Standard Test Methods for Analysis of Magnesium Silicate Pigment
volume 06.03
Vehicles
ASTM D718-86(2003)
Standard Test Methods for Analysis of Aluminum Silicate Pigment
volume 06.03
Vehicles
ASTM D720-91(2004)e1
Standard Test Method for Free-Swelling Index of Coal
volume 05.06
ASTM D721-05
Standard Test Method for Oil Content of Petroleum Waxes
volume 05.01
ASTM D722-93(2002)
Standard Test Method for Grease Resistance of Paper
volume 15.09
ASTM D724-99(2003)
Standard Test Method for Surface Wettability of Paper (Angle-of-Contact Method)
volume 15.09
ASTM D726-94(2003)
Standard Test Method for Resistance of Nonporous Paper to Passage of Air
volume 15.09
ASTM D727-96(2001)
Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method
volume 15.09
ASTM D731-95(1999)
Standard Test Method for Molding Index of Thermosetting Molding Powder
volume 08.01
ASTM D732-02
Standard Test Method for Shear Strength of Plastics by Punch Tool
volume 08.01
ASTM D737-04
Test Method for Air Permeability of Textile Fabrics
volume 07.01
ASTM D740-05
Standard Specification for Methyl Ethyl Ketone
volume 06.04
ASTM D746-04
Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
volume 08.01
ASTM D747-02
Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
volume 08.01
ASTM D748-00(2005)
Standard Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric
Capacitors
volume 10.01
ASTM D750-00
Standard Test Method for Rubber Deterioration in Carbon-Arc Weathering Apparatus
volume 09.01
ASTM D751-06
Standard Test Methods for Coated Fabrics
volume 09.02
ASTM D763-01
Standard Specification for Raw and Burnt Umber Pigments
volume 06.03
Vehicles
ASTM D765-87(2003)
Standard Specification for Raw and Burnt Sienna Pigments
volume 06.03
Vehicles
ASTM D768-01
Standard Specification for Yellow Iron Oxide Hydrated
volume 06.03
Vehicles
ASTM D769-01
Standard Specification for Black Synthetic Iron Oxide
volume 06.03
Vehicles
ASTM D770-05
Standard Specification for Isopropyl Alcohol
volume 06.04
ASTM D772-86(2005)
Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
volume 06.01
ASTM D774/D774M-97(2002)
Standard Test Method for Bursting Strength of Paper
volume 15.09
ASTM D776-92(2001)
Standard Test Method for Determination of Effect of Dry Heat on Properties of Paper and Board
volume 15.09
ASTM D777-97(2002)
Standard Test Methods for Flammability of Treated Paper and Paperboard
volume 15.09
ASTM D778-97(2002)
Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot- Extraction and ColdExtraction Procedures)
volume 15.09
ASTM D779-03
Standard Test Method for Water Resistance of Paper, Paperboard, and Other Sheet Materials by the Dry
Indicator Method
volume 15.09
ASTM D780-95(2003)
Standard Test Method for Printing Ink Permeation of Paper (Castor Oil Test)
volume 15.09
ASTM D784-03
Standard Specification for Orange Shellac and Other Indian Lacs for Electrical Insulation
volume 10.01
ASTM D785-03
Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
volume 08.01
ASTM D787-96(2003)
Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds
volume 08.01
ASTM D788-05
Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
volume 08.01
ASTM D789-06
Standard Test Methods for Determination of Relative Viscosity of Polyamide (PA)
volume 08.01
ASTM D790-03
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical
Insulating Materials
volume 08.01
ASTM D792-00
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
volume 08.01
ASTM D800-05
Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions
volume 15.04
ASTM D801-02
Standard Test Methods for Sampling and Testing Dipentene
volume 06.03
Vehicles
Strona 70
ASTM D802-02
Standard Test Methods for Sampling and Testing Pine Oils
volume 06.03
Vehicles
ASTM D803-03
Standard Test Methods for Testing Tall Oil
volume 06.03
Vehicles
ASTM D804-02
Terminology Relating to Naval Stores, Including Tall Oil and Related Products
volume 06.03
Vehicles
ASTM D806-00
Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures
volume 04.08
ASTM D807-05
Standard Practice for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM
Embrittlement Detector Method)
volume 11.01
Water (I)
ASTM D808-05
Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method)
volume 05.01
ASTM D813-06
Standard Test Method for Rubber Deterioration-Crack Growth
volume 09.01
ASTM D814-95(2005)
Standard Test Method for Rubber Property- Vapor Transmission of Volatile Liquids
volume 09.01
ASTM D816-06
Standard Test Methods for Rubber Cements
volume 09.01
ASTM D817-96(2004)
Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate
volume 06.03
Vehicles
ASTM D820-93(2003)
Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
volume 15.04
ASTM D822-01
Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
volume 06.01
ASTM D823-95(2001)
Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on
Test Panels
volume 06.01
ASTM D824-94(2002)
Standard Test Method for Rate of Absorption of Water by Bibulous Papers
volume 15.09
ASTM D828-97(2002)
Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation
Apparatus
volume 15.09
ASTM D829-97(2002)
Standard Test Methods for Wet Tensile Breaking Strength of Paper and Paper Products
volume 15.09
ASTM D831-94(2004)
Standard Test Method for Gas Content of Cable and Capacitor Oils
volume 10.03
ASTM D832-92(2001)e1
Standard Practice for Rubber Conditioning For Low-Temperature Testing
volume 09.01
ASTM D841-02
Standard Specification for Nitration Grade Toluene
volume 06.04
ASTM D843-97(2006)
Standard Specification for Nitration Grade Xylene
volume 06.04
ASTM D847-04
Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial
Aromatic Hydrocarbons
volume 06.04
ASTM D848-03
Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
volume 06.04
ASTM D849-05
Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
volume 06.04
ASTM D850-03
Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
volume 06.04
ASTM D852-02
Standard Test Method for Solidification Point of Benzene
volume 06.04
ASTM D853-04
Standard Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic
Hydrocarbons
volume 06.04
ASTM D854-05
Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
volume 04.08
ASTM D857-02
Standard Test Method for Aluminum in Water
volume 11.01
Water (I)
ASTM D858-02
Standard Test Methods for Manganese in Water
volume 11.01
Water (I)
ASTM D859-05
Standard Test Method for Silica in Water
volume 11.01
Water (I)
ASTM D861-01a
Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and
Yarns
volume 07.01
ASTM D865-99(2005)
Standard Test Method for Rubber-Deterioration by Heating in Air (Test Tube Enclosure)
volume 09.01
ASTM D866-99(2004)
Standard Specification for Crosslinked Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and
Cable
volume 10.01
ASTM D868-85(2003)
Standard Test Method for Evaluating Degree of Bleeding of Traffic Paint
volume 06.02
ASTM D869-85(2004)
Standard Test Method for Evaluating Degree of Settling of Paint
volume 06.02
ASTM D870-02
Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
volume 06.01
ASTM D871-96(2004)
Standard Test Methods of Testing Cellulose Acetate
volume 06.03
Vehicles
ASTM D873-02
Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
volume 05.01
ASTM D874-00
Standard Test Method for Sulfated Ash from Lubricating Oils and Additives
volume 05.01
ASTM D876-00
Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
volume 10.01
ASTM D877-02e1
Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
volume 10.03
ASTM D878-01e1
Standard Test Method for Inorganic Chlorides and Sulfates in Insulating Oils
volume 10.03
ASTM D880-92(2002)
Standard Test Method for Impact Testing for Shipping Containers and Systems
volume 15.09
ASTM D882-02
Standard Test Method for Tensile Properties of Thin Plastic Sheeting
volume 08.01
ASTM D883-00
Standard Terminology Relating to Plastics
volume 08.01
ASTM D885-06
Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from
Manufactured Organic-Base Fibers
volume 07.01
ASTM D887-82(2003)e1
Standard Practices for Sampling Water-Formed Deposits
volume 11.02
Water (II)
ASTM D888-05
Standard Test Methods for Dissolved Oxygen in Water
volume 11.01
Water (I)
Strona 71
ASTM D889-99(2004)
Standard Test Method for Volatile Oil in Rosin
volume 06.03
Vehicles
ASTM D890-98(2003)
Standard Test Method for Water in Liquid Naval Stores
volume 06.03
Vehicles
ASTM D891-95(2004)
Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
volume 15.05
Engine Coolants; Halogenated Organic
Solvents and Fire Extinguishing Agents;
Industrial and Specialty Chemicals
ASTM D892-03
Standard Test Method for Foaming Characteristics of Lubricating Oils
volume 05.01
ASTM D893-05a
Standard Test Method for Insolubles In Used Lubricating Oils
volume 05.01
ASTM D896-04
Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents
volume 15.06
Adhesives
ASTM D897-01
Standard Test Method for Tensile Properties of Adhesive Bonds
volume 15.06
Adhesives
ASTM D898-05
Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids
volume 15.06
Adhesives
ASTM D899-00
Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
volume 15.06
Adhesives
ASTM D902-00
Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical
Insulation
volume 10.01
ASTM D903-98(2004)
Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
volume 15.06
Adhesives
ASTM D904-99(2005)
Standard Practice for Exposure of Adhesive Specimens to Artificial Light
volume 15.06
Adhesives
ASTM D905-03
Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
volume 15.06
Adhesives
ASTM D906-98(2004)
Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by
Tension Loading
volume 15.06
Adhesives
ASTM D907-05
Standard Termninology of Adhesives
volume 15.06
Adhesives
ASTM D909-01
Standard Test Method for Knock Characteristics of Aviation Gasolines by the Supercharge Method
volume 05.05
ASTM D910-04a
Standard Specification for Aviation Gasolines
volume 05.01
ASTM D913-03
Standard Test Method for Evaluating Degree of Resistance to Wear of Traffic Paint
volume 06.02
ASTM D914-00
Standard Test Methods for Ethylcellulose
volume 06.03
Vehicles
ASTM D918-99(2003)
Standard Test Method for Blocking Resistance of Paper and Paperboard
volume 15.09
ASTM D919-97(2002)
Standard Test Method for Copper Number of Paper and Paperboard
volume 15.09
ASTM D922-00a
Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing
volume 10.01
ASTM D923-97
Standard Practices for Sampling Electrical Insulating Liquids
volume 10.03
ASTM D924-04
Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant)
of Electrical Insulating Liquids
volume 10.03
ASTM D925-06
Standard Test Methods for Rubber Property-Staining of Surfaces (Contact, Migration, and Diffusion)
volume 09.01
ASTM D926-04
Standard Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method)
volume 09.01
ASTM D928-03
Standard Specification for Sodium Bicarbonate
volume 15.04
ASTM D932-85(2002)
Standard Test Method for Iron Bacteria in Water and Water-Formed Deposits
volume 11.02
Water (II)
ASTM D933-84(2003)
Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
volume 11.02
Water (II)
ASTM D934-80(2003)
Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray
Diffraction
volume 11.02
Water (II)
ASTM D937-04
Standard Test Method for Cone Penetration of Petrolatum
volume 05.01
ASTM D938-05
Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum
volume 05.01
ASTM D942-02
Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Bomb Method
volume 05.01
ASTM D943-04a
Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
volume 05.01
ASTM D945-92(2001)e1
Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
volume 09.01
ASTM D946-82(2005)
Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction
volume 04.03
Systems
ASTM D950-03
Standard Test Method for Impact Strength of Adhesive Bonds
volume 15.06
Adhesives
ASTM D951-99(2004)
Standard Test Method for Water Resistance of Shipping Containers by Spray Method
volume 15.09
ASTM D952-02
Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
volume 08.01
ASTM D953-02
Standard Test Method for Bearing Strength of Plastics
volume 08.01
ASTM D955-00
Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
volume 08.01
ASTM D957-95(2006)e1
Standard Practice for Determining Surface Temperature of Molds for Plastics
volume 08.01
ASTM D960-02a
Standard Specification for Raw Castor Oil
volume 06.03
Vehicles
ASTM D961-86(2001)
Standard Specification for Dehydrated Castor Oil
volume 06.03
Vehicles
ASTM D962-81(2003)
Standard Specification for Aluminum Powder and Paste Pigments for Paints
volume 06.03
Vehicles
ASTM D964-03
Standard Specification for Metallic Copper Powder for Use in Antifouling Paints
volume 06.03
Vehicles
ASTM D968-05
Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
volume 06.01
ASTM D969-85(2003)
Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
volume 06.02
Strona 72
ASTM D971-99a(2004)
Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method
volume 10.03
ASTM D972-02
Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
volume 05.01
ASTM D974-04
Standard Test Method for Acid and Base Number by Color-Indicator Titration
volume 05.01
ASTM D975-05
Standard Specification for Diesel Fuel Oils
volume 05.01
ASTM D976-04be1
Standard Test Methods for Calculated Cetane Index of Distillate Fuels
volume 05.01
ASTM D977-05
Standard Specification for Emulsified Asphalt
volume 04.03
Systems
ASTM D979-01
Standard Practice for Sampling Bituminous Paving Mixtures
volume 04.03
Systems
ASTM D982-05
Standard Test Method for Organic Nitrogen in Paper and Paperboard
volume 10.01
ASTM D984-97(2002)
Standard Test Methods for Reducible Sulfur in Paper
volume 15.09
ASTM D985-97(2002)
Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm)
volume 15.09
ASTM D991-89(2005)
Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic
Products
volume 09.01
ASTM D994-98(2003)
Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
volume 04.03
Systems
ASTM D995-95b(2002)
Standard Specification for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
volume 04.03
Systems
ASTM D996-04
Standard Terminology of Packaging and Distribution Environments
volume 15.09
ASTM D999-01
Standard Methods for Vibration Testing of Shipping Containers
volume 15.09
ASTM D1000-04
Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic
Applications
volume 10.01
ASTM D1002-05
Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens
by Tension Loading (Metal-to-Metal)
volume 15.06
Adhesives
ASTM D1003-00
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
volume 08.01
ASTM D1004-03
Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
volume 08.01
ASTM D1005-95(2001)
Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
volume 06.01
ASTM D1006-01
Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood
volume 06.01
ASTM D1007-05
Standard Specification for sec-Butyl Alcohol
volume 06.04
ASTM D1013-93(1998)
Standard Test Method for Determining Total Nitrogen in Resins and Plastics
volume 06.03
Vehicles
ASTM D1014-02
Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
volume 06.01
ASTM D1015-05
Standard Test Method for Freezing Points of High-Purity Hydrocarbons
volume 05.01
ASTM D1016-05
Standard Test Method for Purity of Hydrocarbons from Freezing Points
volume 05.01
ASTM D1018-00(2005)
Standard Test Method for Hydrogen In Petroleum Fractions
volume 05.01
ASTM D1025-00(2004)
Standard Test Method for Nonvolatile Residue of Polymerization Grade Butadiene
volume 05.01
ASTM D1030-95(1999)
Standard Test Method for Fiber Analysis of Paper and Paperboard
volume 15.09
ASTM D1036-99(2005)
Standard Test Methods of Static Tests of Wood Poles
volume 04.10
Wood
ASTM D1037-99
Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
volume 04.10
Wood
ASTM D1038-83(2005)
Standard Terminology Relating to Veneer and Plywood
volume 04.10
Wood
ASTM D1039-94(2004)
Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation
volume 10.01
ASTM D1042-01a
Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
volume 08.01
ASTM D1043-02
Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a
Torsion Test
volume 08.01
ASTM D1044-05
Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
volume 08.01
ASTM D1045-95(2001)
Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
volume 08.01
ASTM D1047-95(2001)
Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
volume 10.01
ASTM D1048-05
Standard Specification for Rubber Insulating Blankets
volume 10.03
ASTM D1049-98(2002)e1
Standard Specification for Rubber Insulating Covers
volume 10.03
ASTM D1050-05e1
Standard Specification for Rubber Insulating Line Hose
volume 10.03
ASTM D1051-02
Standard Specification for Rubber Insulating Sleeves
volume 10.03
ASTM D1052-05
Standard Test Method for Measuring Rubber Deterioration-Cut Growth Using Ross Flexing Apparatus
volume 09.01
ASTM D1053-92a(2001)e1
Standard Test Methods for Rubber Property—Stiffening at Low Temperatures Flexible Polymers and Coated
Fabrics
volume 09.01
ASTM D1054-02e1
Standard Test Method for Rubber Property-Resilience Using a Goodyear-Healey Rebound Pendulum
volume 09.01
ASTM D1055-04
Standard Specifications for Flexible Cellular Materials-Latex Foam
volume 08.01
ASTM D1056-00
Standard Specification for Flexible Cellular Materials-Sponge or Expanded Rubber
volume 08.01
ASTM D1059-01
Standard Test Method for Yarn Number Based on Short-Length Specimens
volume 07.01
ASTM D1060-96(2005)
Standard Practice for Core Sampling of Raw Wool in Packages for Determination of Percentage of Clean
Wool Fiber Present
volume 07.01
Strona 73
ASTM D1061-95(2004)e1
Standard Specification for Asbestos Lap
volume 04.05
ASTM D1062-02
Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
volume 15.06
Adhesives
ASTM D1065-96(2001)
Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related
Products
volume 06.03
Vehicles
ASTM D1066-97(2001)
Standard Practice for Sampling Steam
volume 11.01
Water (I)
ASTM D1067-02
Standard Test Methods for Acidity or Alkalinity of Water
volume 11.01
Water (I)
ASTM D1068-05e1
Standard Test Methods for Iron in Water
volume 11.01
Water (I)
ASTM D1070-03
Standard Test Methods for Relative Density of Gaseous Fuels
volume 05.06
ASTM D1071-83(2003)
Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
volume 05.06
ASTM D1072-06
Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
volume 05.06
ASTM D1073-01
Standard Specification for Fine Aggregate for Bituminous Paving Mixtures
volume 04.03
Systems
ASTM D1074-02
Standard Test Method for Compressive Strength of Bituminous Mixtures
volume 04.03
Systems
ASTM D1075-96(2005)
Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
volume 04.03
Systems
ASTM D1076-06
Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural
Latex
volume 09.01
ASTM D1078-05
Standard Test Method for Distillation Range of Volatile Organic Liquids
volume 06.04
ASTM D1079-05a
Terminology Relating to Roofing and Waterproofing
volume 04.04
ASTM D1082-00(2005)
Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
volume 10.01
ASTM D1084-97(2005)
Standard Test Methods for Viscosity of Adhesives
volume 15.06
Adhesives
ASTM D1091-00(2005)
Standard Test Methods for Phosphorus in Lubricating Oils and Additives
volume 05.01
ASTM D1092-05
Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
volume 05.01
ASTM D1093-04
Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues
volume 05.01
ASTM D1094-00(2005)
Standard Test Method for Water Reaction of Aviation Fuels
volume 05.01
ASTM D1101-97a(2006)
Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior
Use
volume 15.06
Adhesives
ASTM D1102-84(2001)
Standard Test Method for Ash in Wood
volume 04.10
Wood
ASTM D1105-96(2001)
Standard Test Method for Preparation of Extractive-Free Wood
volume 04.10
Wood
ASTM D1106-96(2001)
Standard Test Method for Acid-Insoluble Lignin in Wood
volume 04.10
Wood
ASTM D1107-96(2001)
Standard Test Method for Ethanol-Toluene Solubility of Wood
volume 04.10
Wood
ASTM D1108-96(2001)
Standard Test Method for Dichloromethane Solubles in Wood
volume 04.10
Wood
ASTM D1109-84(2001)
Standard Test Method for 1% Sodium Hydroxide Solubility of Wood
volume 04.10
Wood
ASTM D1110-84(2001)
Standard Test Methods for Water Solubility of Wood
volume 04.10
Wood
ASTM D1113-90a(2001)
Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool
volume 07.01
ASTM D1117-01
Standard Guide for Evaluating Nonwoven Fabrics
volume 07.01
ASTM D1118-95(2004)e2
Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles
volume 04.05
ASTM D1119-05
Standard Test Method for Percent Ash Content of Engine Coolants
volume 15.05
ASTM D1120-94(2004)
Standard Test Method for Boiling Point of Engine Coolants
volume 15.05
ASTM D1121-98(2003)
Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
volume 15.05
ASTM D1122-97a(2002)
Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants
By The Hydrometer
volume 15.05
ASTM D1123-99(2003)
Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
volume 15.05
ASTM D1125-95(2005)
Standard Test Methods for Electrical Conductivity and Resistivity of Water
volume 11.01
Water (I)
ASTM D1126-02
Standard Test Method for Hardness in Water
volume 11.01
Water (I)
ASTM D1129-04e1
Standard Terminology Relating to Water
volume 11.01
Water (I)
ASTM D1133-04
Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents
volume 06.04
ASTM D1135-86(2004)
Standard Test Methods for Chemical Analysis of Blue Pigments
volume 06.03
Vehicles
ASTM D1139-00(2004)
Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
volume 04.03
Systems
ASTM D1140-00
Standard Test Methods for Amount of Material in Soils Finer Than the No. 200 (75-um) Sieve
volume 04.08
ASTM D1141-98(2003)
Standard Practice for the Preparation of Substitute Ocean Water
volume 11.02
Water (II)
ASTM D1142-95(2006)
Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point
Temperature
volume 05.06
ASTM D1144-99(2005)
Standard Practice for Determining Strength Development of Adhesive Bonds
volume 15.06
Adhesives
ASTM D1146-00
Standard Test Method for Blocking Point of Potentially Adhesive Layers
volume 15.06
Adhesives
ASTM D1148-95(2001)
Standard Test Method for Rubber Deterioration—Heat and Ultraviolet Light Discoloration of Light-Colored
Surfaces
volume 09.01
ASTM D1149-99
Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber
volume 09.01
Strona 74
ASTM D1151-00
Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
volume 15.06
Adhesives
ASTM D1152-97(2001)
Standard Specification for Methanol (Methyl Alcohol)
volume 06.04
ASTM D1153-94(2001)
Standard Specification for Methyl Isobutyl Ketone
volume 06.04
ASTM D1155-03
Standard Test Method for Roundness of Glass Spheres
volume 06.02
ASTM D1157-91(2004)
Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons
volume 05.01
ASTM D1159-01
Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by
Electrometric Titration
volume 05.01
ASTM D1160-03
Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
volume 05.01
ASTM D1165-03
Standard Nonmenclature of Domestic Hardwoods and Softwoods
volume 04.10
Wood
ASTM D1166-84(2001)
Standard Test Method for Methoxyl Groups in Wood and Related Materials
volume 04.10
Wood
ASTM D1168-99(2003)
Standard Test Methods for Hydrocarbon Waxes Used for Electrical Insulation
volume 10.01
ASTM D1169-02
Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
volume 10.03
ASTM D1171-99
Standard Test Method for Rubber Deterioration-Surface Ozone Cracking Outdoors or Chamber (Triangular
Specimens)
volume 09.01
ASTM D1172-95(2001)
Standard Guide for pH of Aqueous Solutions of Soaps and Detergents
volume 15.04
ASTM D1173-53(2001)
Standard Test Method for Foaming Properties of Surface-Active Agents
volume 15.04
ASTM D1176-98(2002)
Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing
Purposes
volume 15.05
ASTM D1177-05
Standard Test Method for Freezing Point of Aqueous Engine Coolants
volume 15.05
ASTM D1179-04
Standard Test Methods for Fluoride Ion in Water
volume 11.01
Water (I)
ASTM D1183-03
Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
volume 15.06
Adhesives
ASTM D1184-98(2004)
Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
volume 15.06
Adhesives
ASTM D1185-98a(2003)
Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
volume 15.09
ASTM D1186-01
Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings
Applied to a Ferrous Base
volume 06.01
ASTM D1187-97(2002)e1
Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal
volume 04.04
ASTM D1188-96(2002)e1
Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using
Paraffin-Coated Specimens
volume 04.03
Systems
ASTM D1193-99e1
Standard Specification for Reagent Water
volume 11.01
Water (I)
ASTM D1195-93(2004)
Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components,
for Use in Evaluation and Design of Airport and Highway Pavements
volume 04.03
Systems
ASTM D1196-93(2004)
Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement
Components, for Use in Evaluation and Design of Airport and Highway Pavements
volume 04.03
Systems
ASTM D1198-93(1998)
Standard Test Method for Solvent Tolerance of Amine Resins
volume 06.03
Vehicles
ASTM D1199-86(2003)
Standard Specification for Calcium Carbonate Pigments
volume 06.03
Vehicles
ASTM D1200-94(2005)
Standard Test Method for Viscosity by Ford Viscosity Cup
volume 06.01
ASTM D1201-99(2004)
Standard Specification for Thermosetting Polyester Molding Compounds
volume 08.01
ASTM D1203-94(2003)
Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
volume 08.01
ASTM D1204-02
Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at
Elevated Temperature
volume 08.01
ASTM D1208-96(2002)
Standard Test Methods for Common Properties of Certain Pigments
volume 06.03
Vehicles
ASTM D1209-05
Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
volume 06.04
ASTM D1210-05
Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
volume 06.01
ASTM D1211-97
Standard Test Method for Temperature-Change Resistance of Clear Nitrocellulose Lacquer Films Applied to
Wood
volume 06.02
ASTM D1212-91(2001)
Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
volume 06.01
ASTM D1214-04
Standard Test Method for Sieve Analysis of Glass Spheres
volume 06.02
ASTM D1217-93(2003)e1
Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
volume 05.01
ASTM D1218-02
Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids
volume 05.01
ASTM D1223-93(1998)
Standard Test Method for Specular Gloss of Paper and Paperboard at 75°
volume 15.09
ASTM D1224-92(2001)
Standard Test Methods for Zinc and Cadmium in Paper
volume 15.09
ASTM D1227-95(2000)
Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing
volume 04.04
ASTM D1229-03
Standard Test Method for Rubber Property—Compression Set at Low Temperatures
volume 09.01
ASTM D1230-94(2001)
Standard Test Method for Flammability of Apparel Textiles
volume 07.01
ASTM D1234-85(2001)
Standard Test Method of Sampling and Testing Staple Length of Grease Wool
volume 07.01
ASTM D1238-04c
Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
volume 08.01
ASTM D1239-98
Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
volume 08.01
ASTM D1240-02
Standard Test Methods for Rosin Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related
Products
volume 06.03
Vehicles
Strona 75
ASTM D1241-00
Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses
volume 04.08
ASTM D1243-95(2000)e1
Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers
volume 08.01
ASTM D1244-98(2005)
Standard Practice for Designation of Yarn Construction
volume 07.01
ASTM D1245-84(2003)
Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
volume 11.02
Water (II)
ASTM D1246-05
Standard Test Method for Bromide Ion in Water
volume 11.01
Water (I)
ASTM D1248-05
Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable
volume 08.01
ASTM D1249-92(1999)
Standard Specification for Octyl Ortho-Phthalate Ester Plasticizers
volume 08.01
ASTM D1250-04
Standard Guide for Use of the Petroleum Measurement Tables
volume 05.01
ASTM D1252-06
Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
volume 11.02
Water (II)
ASTM D1253-03
Standard Test Method for Residual Chlorine in Water
volume 11.01
Water (I)
ASTM D1257-90(2001)
Standard Specification for High-Gravity Glycerin
volume 06.04
ASTM D1258-05
Standard Test Methods for High-Gravity Glycerin
volume 06.04
ASTM D1259-85(2001)
Standard Test Methods for Nonvolatile Content of Resin Solutions
volume 06.01
ASTM D1263-94(2005)e1
Standard Test Method for Leakage Tendencies of Automotive Wheel Bearing Greases
volume 05.01
ASTM D1264-03e1
Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
volume 05.01
ASTM D1265-05
Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)
volume 05.01
ASTM D1266-98(2003)e1
Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
volume 05.01
ASTM D1267-02
Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
volume 05.01
ASTM D1272-56(2002)
Standard Specification for Pentachlorophenol
volume 04.10
Wood
ASTM D1274-95(2000)
Standard Test Methods for Chemical Analysis of Pentachlorophenol
volume 04.10
Wood
ASTM D1275-06
Standard Test Method for Corrosive Sulfur in Electrical Insulating Oils
volume 10.03
ASTM D1278-91a(2002)e1
Standard Test Methods for Rubber from Natural Sources-Chemical Analysis
volume 09.01
ASTM D1280-00
Standard Test Method for Total Immersion Corrosion Test for Soak Tank Metal Cleaners
volume 15.04
ASTM D1282-05
Standard Test Method for Resistance to Airflow as an Indication of Average Fiber Diameter of Wool Top,
Card Sliver, and Scoured Wool
volume 07.01
ASTM D1283-05
Standard Test Method for Alkali-Soluability of Wools
volume 07.01
ASTM D1287-91(2002)
Standard Test Method for pH of Engine Coolants and Antirusts
volume 15.05
ASTM D1290-95(2002)
Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
volume 15.04
ASTM D1291-01
Standard Practice for Estimation of Chlorine Requirement or Demand of Water, or Both
volume 11.02
Water (II)
ASTM D1292-05
Standard Test Method for Odor in Water
volume 11.01
Water (I)
ASTM D1293-99(2005)
Standard Test Methods for pH of Water
volume 11.01
Water (I)
ASTM D1294-05
Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm)
Gage Length
volume 07.01
ASTM D1296-01
Standard Test Method for Odor of Volatile Solvents and Diluents
volume 06.04
ASTM D1298-99(2005)
Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum
and Liquid Petroleum Products by Hydrometer Method
volume 05.01
ASTM D1301-91(2003)
Standard Test Methods for Chemical Analysis of White Lead Pigments
volume 06.03
Vehicles
ASTM D1304-99(2005)
Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation
volume 15.06
Adhesives
ASTM D1305-99(2004)
Standard Specification for Electrical Insulating Paper and Paperboard-Sulfate (Kraft) Layer Type
volume 10.01
ASTM D1308-02e1
Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
volume 06.02
ASTM D1309-93(2004)
Standard Test Method for Settling Properties of Traffic Paints During Storage
volume 06.02
ASTM D1310-01
Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
volume 06.01
ASTM D1312-93(1998)
Standard Test Methods for Apparent Free Phenols in Synthetic Phenolic Resins or Solutions Used for
Coating Purposes
volume 06.03
Vehicles
ASTM D1316-93(2001)
Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
volume 06.02
ASTM D1318-00(2005)
Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)
volume 05.01
ASTM D1319-03
Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator
Adsorption
volume 05.01
ASTM D1321-04
Standard Test Method for Needle Penetration of Petroleum Waxes
volume 05.01
ASTM D1322-97(2002)e1
Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
volume 05.01
ASTM D1325-94(2000)
Standard Specification for Ammoniacal Copper Arsenate and Ammoniacal Copper Zinc Arsenate
volume 04.10
Wood
ASTM D1326-94(2000)
Standard Test Methods for Chemical Analysis of Ammoniacal Copper Arsenate and Ammoniacal Copper
Zinc Arsenate
volume 04.10
Wood
ASTM D1327-04
Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing
volume 04.04
ASTM D1329-02
Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
volume 09.01
ASTM D1330-04
Standard Specification for Rubber Sheet Gaskets
volume 09.02
ASTM D1331-89(2001)
Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
volume 15.04
Strona 76
ASTM D1334-05
Standard Test Method for Wool Content of Raw Wool-Commercial Scale
volume 07.01
ASTM D1335-05
Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings
volume 07.01
ASTM D1336-97(2003)
Standard Test Method for Distortion of Yarn in Woven Fabrics
volume 07.01
ASTM D1337-04
Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
volume 15.06
Adhesives
ASTM D1338-99(2005)
Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
volume 15.06
Adhesives
ASTM D1342-92(2002)
Standard Test Method for Paraffin-Type Hydrocarbons in Carnauba Wax
volume 15.04
ASTM D1343-95(2000)
Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method
volume 06.03
Vehicles
ASTM D1348-94(2003)
Standard Test Methods for Moisture in Cellulose
volume 06.03
Vehicles
ASTM D1349-99(2005)
Standard Practice for Rubber-Standard Temperatures for Testing
volume 09.01
ASTM D1351-02
Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
volume 10.01
ASTM D1353-03
Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and
Related Products
volume 06.04
ASTM D1356-05
Standard Termninology Relating to Sampling and Analysis of Atmospheres
volume 11.03
Atmospheric Analysis; Occupational Health and
Safety; Protective Clothing
ASTM D1357-95(2005)
Standard Practice for Planning the Sampling of the Ambient Atmosphere
volume 11.03
ASTM D1360-98(2004)
Standard Test Method for Fire Retardancy of Paints (Cabinet Method)
volume 06.01
ASTM D1363-94(2001)
Standard Test Method for Permanganate Time of Acetone and Methanol
volume 06.04
ASTM D1364-02
Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
volume 06.04
ASTM D1366-86(2003)
Standard Practice for Reporting Particle Size Characteristics of Pigments
volume 06.03
Vehicles
ASTM D1367-96(2001)
Standard Test Method for Lubricating Qualities of Graphites
volume 05.01
ASTM D1369-84(2000)
Standard Practice for Quantities of Materials for Bituminous Surface Treatments
volume 04.03
Systems
ASTM D1370-00
Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
volume 04.04
ASTM D1384-05e1
Standard Test Method for Corrosion Test for Engine Coolants in Glassware
volume 15.05
ASTM D1385-01
Standard Test Method for Hydrazine in Water
volume 11.01
Water (I)
ASTM D1386-98(2004)
Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes
volume 15.04
ASTM D1387-89(2002)
Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes
volume 15.04
ASTM D1388-96(2002)
Standard Test Method for Stiffness of Fabrics
volume 07.01
ASTM D1389-97a(2004)
Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
volume 10.01
ASTM D1392-92(1998)
Standard Specification for Safflower Oil
volume 06.03
Vehicles
ASTM D1394-76(2003)
Standard Test Methods for Chemical Analysis of White Titanium Pigments
volume 06.03
Vehicles
ASTM D1396-92(1998)
Standard Test Methods for Chemical Analysis of Poly(Vinyl Butyral)
volume 06.03
Vehicles
ASTM D1397-93(1998)
Standard Test Method for Unsaponifiable Matter in Alkyd Resins and Resin Solutions
volume 06.03
Vehicles
ASTM D1398-93(1998)
Standard Test Method for Fatty Acid Content of Alkyd Resins and Alkyd Resin Solutions
volume 06.03
Vehicles
ASTM D1400-00
Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings
Applied to a Nonferrous Metal Base
volume 06.01
ASTM D1401-02
Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
volume 05.01
ASTM D1403-02
Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale
Cone Equipment
volume 05.01
Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
volume 05.01
ASTM D1405-01
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
volume 05.01
ASTM D1411-04
Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road
Mixes
volume 04.08
ASTM D1412-04
Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30°C
volume 05.06
ASTM D1413-05b
Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
volume 04.10
Wood
ASTM D1414-94(2003)
Standard Test Methods for Rubber O-Rings
volume 09.02
ASTM D1415-05
Standard Test Method for Rubber Property—International Hardness
volume 09.01
ASTM D1417-03a
Standard Test Methods for Rubber Latices-Synthetic
volume 09.01
ASTM D1418-06
Standard Practice for Rubber and Rubber Latices-Nomenclature
volume 09.01
ASTM D1422-99
Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method
volume 07.01
ASTM D1423-02
Standard Test Method for Twist in Yarns by Direct-Counting
volume 07.01
ASTM D1424-96(2004)
Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
volume 07.01
ASTM D1426-03
Standard Test Methods for Ammonia Nitrogen In Water
volume 11.01
Water (I)
ASTM D1429-03
Standard Test Methods for Specific Gravity of Water and Brine
volume 11.01
Water (I)
ASTM D1430-03
Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics
volume 08.01
ASTM
D1404/D1404M99(2003)
Strona 77
ASTM D1434-82(2003)
Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
volume 15.09
ASTM D1435-05
Standard Practice for Outdoor Weathering of Plastics
volume 08.01
ASTM D1436-97(2002)
Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes
volume 15.04
ASTM D1439-03
Standard Test Methods for Sodium Carboxymethylcellulose
volume 06.03
Vehicles
ASTM D1440-96(2002)
Standard Test Method for Length and Length Distribution of Cotton Fibers (Array Method)
volume 07.01
ASTM D1441-06
Standard Practice for Sampling Cotton Fibers for Testing
volume 07.01
ASTM D1442-06
Standard Test Method for Maturity of Cotton Fibers (Sodium Hydroxide Swelling and Polarized Light
Procedures)
volume 07.01
ASTM D1445-05
Standard Test Method for Breaking Strength and Elongation of Cotton Fibers (Flat Bundle Method)
volume 07.01
ASTM D1447-00
Standard Test Method for Length and Length Uniformity of Cotton Fibers by Fibrograph Measurement
volume 07.01
ASTM D1448-05
Standard Test Method for Micronaire Reading of Cotton Fibers
volume 07.01
ASTM D1452-80(2000)
Standard Practice for Soil Investigation and Sampling by Auger Borings
volume 04.08
ASTM D1455-87(2002)
Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish
volume 15.04
ASTM D1456-86(2005)
Standard Test Method for Rubber Property—Elongation at Specific Stress
volume 09.01
ASTM D1458-01
Standard Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical
Insulation
volume 10.01
ASTM D1459-93(2003)
Standard Specification for Silicone Varnished Glass Cloth and Tape for Electrical Insulation
volume 10.01
ASTM D1460-86(2005)
Standard Test Method for Rubber Property—Change in Length During Liquid Immersion
volume 09.01
ASTM D1461-85(2001)
Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures
volume 04.03
Systems
ASTM D1462-92(1998)
Standard Specification for Refined Soybean Oil
volume 06.03
Vehicles
ASTM D1464-90(2002)
Standard Test Method for Differential Dyeing Behavior of Cotton
volume 07.01
ASTM D1465-04
Standard Test Method for Blocking and Picking Points of Petroleum Wax
volume 05.01
ASTM D1474-98(2002)
Standard Test Methods for Indentation Hardness of Organic Coatings
volume 06.01
ASTM D1475-98(2003)
Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
volume 06.01
ASTM D1476-02
Standard Test Method for Heptane Miscibility of Lacquer Solvents
volume 06.04
ASTM D1478-02
Standard Test Method for Low-Temperature Torque of Ball Bearing Grease
volume 05.01
ASTM D1480-02
Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham
Pycnometer
volume 05.01
ASTM D1481-02
Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin
Bicapillary Pycnometer
volume 05.01
ASTM D1483-95(2002)
Standard Test Method for Oil Absorption of Pigments by Gardner-Coleman Method
volume 06.01
ASTM D1485-86(2002)
Standard Test Methods for Rubber from Natural Sources-Sampling and Sample Preparation
volume 09.01
ASTM D1488-00
Standard Test Method for Amylaceous Matter in Adhesives
volume 15.06
Adhesives
ASTM D1489-97(2004)
Standard Test Method for Nonvolatile Content of Aqueous Adhesives
volume 15.06
Adhesives
ASTM D1490-01
Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
volume 15.06
Adhesives
ASTM D1492-02
Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
volume 06.04
ASTM D1494-97(2001)
Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
volume 08.04
ASTM D1498-00
Standard Practice for Oxidation-Reduction Potential of Water
volume 11.01
Water (I)
ASTM D1499-05
Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
volume 08.01
ASTM D1500-04a
Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
volume 05.01
ASTM D1505-03
Standard Test Method for Density of Plastics by the Density-Gradient Technique
volume 08.01
ASTM D1506-99
Standard Test Methods for Carbon Black-Ash Content
volume 09.01
ASTM D1508-02e2
Standard Test Method for Carbon Black, Pelleted Fines and Attrition
volume 09.01
ASTM D1509-95(2000)
Standard Test Methods for Carbon Black-Heating Loss
volume 09.01
ASTM D1510-06a
Standard Test Method for Carbon Black-Iodine Adsorption Number
volume 09.01
ASTM D1511-00e2
Standard Test Method for Carbon Black-Pellet Size Distribution
volume 09.01
ASTM D1512-05
Standard Test Methods for Carbon Black-pH Value
volume 09.01
ASTM D1513-05
Standard Test Method for Carbon Black, Pelleted—Pour Density
volume 09.01
ASTM D1514-04
Standard Test Method for Carbon Black—Sieve Residue
volume 09.01
ASTM D1516-05
Standard Test Method for Width of Leather
volume 15.04
ASTM D1517-04e1
Standard Terminology Relating to Leather
volume 15.04
ASTM D1518-85(2003)
Standard Test Method for Thermal Transmittance of Textile Materials
volume 07.01
ASTM D1519-95(2004)e1
Standard Test Method for Rubber Chemicals-Melting Range
volume 09.01
ASTM D1523-00
Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operation
volume 10.01
ASTM D1524-94(2004)
Standard Test Method for Visual Examination of Used Electrical Insulating Oils of Petroleum Origin in the
Field
volume 10.03
Strona 78
ASTM D1525-06
Standard Test Method for Vicat Softening Temperature of Plastics
volume 08.01
ASTM D1527-99(2005)
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
volume 08.04
ASTM D1531-01
Standard Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid
Displacement Procedures
volume 10.01
ASTM D1533-00(2005)
Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
volume 10.03
ASTM D1534-95(2002)e1
Standard Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration
volume 10.03
ASTM D1535-01
Standard Practice for Specifying Color by the Munsell System
volume 06.01
ASTM D1537-60(1998)
Standard Specification for Distilled Soybean Fatty Acids
volume 06.03
Vehicles
ASTM D1538-60(1998)
Standard Specification for Distilled Linseed Fatty Acids
volume 06.03
Vehicles
ASTM D1539-60(1998)
Standard Specification for Dehydrated Castor Acids
volume 06.03
Vehicles
ASTM D1544-04
Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)
volume 06.01
ASTM D1545-98
Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
volume 06.03
Vehicles
ASTM D1546-96(2003)
Standard Practice for Testing the Performance of Clear Floor Sealers
volume 06.02
ASTM D1550-94(2005)
Standard ASTM Butadiene Measurement Tables
volume 05.01
ASTM D1552-03
Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
volume 05.01
ASTM D1554-01(2005)
Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials
volume 04.10
Wood
ASTM D1555-04a
Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and
Cyclohexane
volume 06.04
ASTM D1555M-04a
Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and
Cyclohexane [Metric]
volume 06.04
ASTM D1556-00
Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
volume 04.08
ASTM D1557-02e1
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ftlbf/ft3(2,700 kN-m/m3))
volume 04.08
ASTM D1558-99(2004)e1
Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils
volume 04.08
ASTM D1560-05e1
Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of
Hveem Apparatus
volume 04.03
Systems
ASTM D1561-92(2005)e1
Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading
Compactor
volume 04.03
Systems
ASTM D1562-05
Standard Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds
volume 08.01
ASTM D1566-06
Standard Terminology Relating to Rubber
volume 09.01
ASTM D1568-05
Standard Test Methods for Sampling and Chemical Analysis of Alkylbenzene Sulfonates
volume 15.04
ASTM D1569-05
Standard Test Methods for Detergent Alkylate
volume 15.04
ASTM D1570-95(2003)
Standard Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates
volume 15.04
ASTM D1571-95(2004)e1
Standard Specification for Woven Asbestos Cloth
volume 04.05
ASTM D1573-95(2004)e1
Standard Test Method for Heat Aging of Asbestos Textiles
volume 04.05
ASTM D1574-04
Standard Test Method for Extractable Matter in Wool and Other Animal Fibers
volume 07.01
ASTM D1575-90(2001)
Standard Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver
volume 07.01
ASTM D1576-90(2001)
Standard Test Method for Moisture in Wool by Oven-Drying
volume 07.01
ASTM D1577-01
Standard Test Methods for Linear Density of Textile Fibers
volume 07.01
ASTM D1578-93(2006)e1
Standard Test Method for Breaking Strength of Yarn in Skein Form
volume 07.01
ASTM D1579-01
Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives
volume 15.06
Adhesives
ASTM D1582-98(2004)
Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives
volume 15.06
Adhesives
ASTM D1583-01
Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
volume 15.06
Adhesives
ASTM D1585-96(2003)
Standard Test Methods for Fatty Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related
Products
volume 06.03
Vehicles
ASTM D1586-99
Standard Test Method for Penetration Test and Split-Barrel Sampling of Soils
volume 04.08
ASTM D1587-00
Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes
volume 04.08
ASTM D1593-99
Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
volume 08.01
ASTM D1596-97(2003)
Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
volume 15.09
ASTM D1598-02
Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
volume 08.04
ASTM D1599-99(2005)
Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
volume 08.04
ASTM D1600-99
Standard Terminology for Abbreviated Terms Relating to Plastics
volume 08.01
ASTM D1601-99(2004)
Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers
volume 08.01
ASTM D1603-06
Standard Test Method for Carbon Black Content in Olefin Plastics
volume 08.01
ASTM D1607-91(2005)
Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction)
volume 11.03
Strona 79
ASTM D1608-98(2003)
Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid
Procedures)
volume 11.03
ASTM D1610-01
Standard Practice for Conditioning Leather and Leather Products for Testing
volume 15.04
ASTM D1611-00(2005)
Standard Test Method for Corrosion Produced by Leather in Contact with Metal
volume 15.04
ASTM D1612-05
Standard Test Method for Acetone in Methanol
volume 06.04
ASTM D1613-03
Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish,
Lacquer, and Related Products
volume 06.04
ASTM D1614-03
Standard Test Method for Alkalinity in Acetone
volume 06.04
ASTM D1617-90(2001)
Standard Test Method for Ester Value of Solvents and Thinners
volume 06.04
ASTM D1618-99(2004)
Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract
volume 09.01
ASTM D1619-03
Standard Test Methods for Carbon Black—Sulfur Content
volume 09.01
ASTM D1621-04a
Standard Test Method for Compressive Properties Of Rigid Cellular Plastics
volume 08.01
ASTM D1622-03
Standard Test Method for Apparent Density of Rigid Cellular Plastics
volume 08.01
ASTM D1623-03
Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
volume 08.01
ASTM D1624-71(2000)
Standard Specification for Acid Copper Chromate
volume 04.10
Wood
ASTM D1625-71(2000)
Standard Specification for Chromated Copper Arsenate
volume 04.10
Wood
ASTM D1627-94(2000)
Standard Test Methods for Chemical Analysis of Acid Copper Chromate
volume 04.10
Wood
ASTM D1628-94(2000)
Standard Test Methods for Chemical Analysis of Chromated Copper Arsenate
volume 04.10
Wood
ASTM D1630-06
Standard Test Method for Rubber Property-Abrasion Resistance (Footwear Abrader)
volume 09.01
ASTM D1631-99(2004)
Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method
volume 06.04
ASTM D1633-00
Standard Test Method for Compressive Strength of Molded Soil-Cement Cylinders
volume 04.08
ASTM D1634-00
Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure
(Modified Cube Method)
volume 04.08
ASTM D1635-00
Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
volume 04.08
ASTM D1636-99(2004)e1
Standard Specification for Allyl Molding Compounds
volume 08.01
ASTM D1640-03
Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
volume 06.01
ASTM D1641-04
Standard Practice for Conducting Outdoor Exposure Tests of Varnishes
volume 06.02
ASTM D1644-01
Standard Test Methods for Nonvolatile Content of Varnishes
volume 06.01
ASTM D1646-04
Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics
(Mooney Viscometer)
volume 09.01
ASTM D1648-86(2003)
Standard Specification for Basic Lead Silicochromate Pigment
volume 06.03
Vehicles
ASTM D1649-01
Standard Specification for Strontium Chromate Pigment
volume 06.03
Vehicles
ASTM D1652-04
Standard Test Method for Epoxy Content of Epoxy Resins
volume 06.03
Vehicles
ASTM D1653-03
Standard Test Methods for Water Vapor Transmission of Organic Coating Films
volume 06.01
ASTM D1654-05
Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
volume 06.01
ASTM D1655-05
Standard Specification for Aviation Turbine Fuels
volume 05.01
ASTM D1657-02
Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
volume 05.01
ASTM D1662-92(2002)
Standard Test Method for Active Sulfur in Cutting Oils
volume 05.01
ASTM D1665-98(2003)
Standard Test Method for Engler Specific Viscosity of Tar Products
volume 04.03
Systems
ASTM D1666-87(2004)
Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Materials
volume 04.10
Wood
ASTM D1667-05
Standard Specification for Flexible Cellular Materials-Vinyl Chloride Polymers and Copolymers (Closed-Cell
Foam)
volume 08.01
ASTM D1668-97a(2006)
Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing
volume 04.04
ASTM D1669-03
Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous
Coatings
volume 04.04
ASTM D1670-04
Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
volume 04.04
ASTM D1675-03
Standard Test Methods for Polytetrafluoroethylene Tubing
volume 10.01
ASTM D1676-03
Standard Test Methods for Film-Insulated Magnet Wire
volume 10.01
ASTM D1677-02
Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
volume 10.01
ASTM D1681-05
Standard Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure
volume 15.04
ASTM D1683-04
Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics
volume 07.01
ASTM D1684-96(2002)
Standard Practice for Lighting Cotton Classing Rooms for Color Grading
volume 07.01
ASTM D1685-05
Standard Test Method for Traces of Thiophene in Benzene by Spectrophotometry
volume 06.04
ASTM D1686-96(2004)
Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State
(Platinum-Cobalt Scale)
volume 06.04
ASTM D1687-02
Standard Test Methods for Chromium in Water
volume 11.01
Water (I)
ASTM D1688-02
Standard Test Methods for Copper in Water
volume 11.01
Water (I)
ASTM D1691-02
Standard Test Methods for Zinc in Water
volume 11.01
Water (I)
Strona 80
ASTM D1693-05
Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
volume 08.01
ASTM D1695-96(2001)
Standard Terminology of Cellulose and Cellulose Derivatives
volume 06.03
Vehicles
ASTM D1696-95(2000)
Standard Test Method for Solubility of Cellulose in Sodium Hydroxide
volume 06.03
Vehicles
ASTM D1698-03
Standard Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils
volume 10.03
ASTM D1708-06
Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
volume 08.01
ASTM D1709-04
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
volume 08.01
ASTM D1710-02
Standard Specification for Extruded and Compression Molded Polytetrafluoroethylene (PTFE) Rod and
Heavy-Walled Tubing
volume 08.01
ASTM D1711-02
Standard Terminology Relating to Electrical Insulation
volume 10.01
ASTM D1712-03
Standard Practice for Resistance of Plastics to Sulfide Staining
volume 08.01
ASTM D1718-03
Standard Specification for Isobutyl Acetate (95% Grade)
volume 06.04
ASTM D1719-05
Standard Specification for Isobutyl Alcohol
volume 06.04
ASTM D1720-03
Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions
volume 06.04
ASTM D1721-97(2001)
Standard Test Method for Permanganate Time of Tricresyl Phosphate
volume 06.04
ASTM D1722-98(2004)
Standard Test Method for Water Miscibility of Water-Soluble Solvents
volume 06.04
ASTM D1725-04
Standard Test Method for Viscosity of Resin Solutions
volume 06.03
Vehicles
ASTM D1726-03
Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins
volume 06.03
Vehicles
ASTM D1729-96(2003)
Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque
Materials
volume 06.01
ASTM D1730-03
Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
volume 02.05
ASTM D1731-03
Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
volume 02.05
ASTM D1732-03
Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting
volume 02.05
ASTM D1734-93(2003)
Standard Practice for Making Cementitious Panels for Testing Coatings
volume 06.02
ASTM D1735-04
Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
volume 06.01
ASTM D1739-98(2004)
Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
volume 11.03
ASTM D1740-01
Standard Test Method for Luminometer Numbers of Aviation Turbine Fuels
volume 05.01
ASTM D1742-94(2000)e1
Standard Test Method for Oil Separation from Lubricating Grease During Storage
volume 05.01
ASTM D1743-05ae1
Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
volume 05.01
ASTM D1746-03
Standard Test Method for Transparency of Plastic Sheeting
volume 08.01
ASTM D1747-99(2004)e1
Standard Test Method for Refractive Index of Viscous Materials
volume 05.01
ASTM D1748-02
Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
volume 05.01
ASTM D1749-93(2002)
Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products
volume 15.09
ASTM D1751-04
Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction
(Nonextruding and Resilient Bituminous Types)
volume 04.03
Systems
ASTM D1752-04a
Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for
Concrete Paving and Structural Construction
volume 04.03
Systems
ASTM D1754-97(2002)
Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
volume 04.03
Systems
ASTM D1755-92(2001)
Standard Specification for Poly(Vinyl Chloride) Resins
volume 08.01
ASTM D1756-02
Standard Test Method for Determination as Carbon Dioxide of Carbonate Carbon in Coal
volume 05.06
ASTM D1757-03
Standard Test Method for Sulfate Sulfur in Ash from Coal and Coke
volume 05.06
ASTM D1758-05
Standard Test Method of Evaluating Wood Preservatives by Field Tests with Stakes
volume 04.10
Wood
ASTM D1761-06
Standard Test Methods for Mechanical Fasteners in Wood
volume 04.10
Wood
ASTM D1762-84(2001)
Standard Test Method for Chemical Analysis of Wood Charcoal
volume 04.10
Wood
ASTM D1763-00(2005)
Standard Specification for Epoxy Resins
volume 08.01
ASTM D1765-05ae1
Standard Classification System for Carbon Blacks Used in Rubber Products
volume 09.01
ASTM D1766-05
Standard Test Method for Rubber Chemicals—Solubility
volume 09.01
ASTM D1767-89(2003)
Standard Test Method for Ethylene Diamine Tetraacetate (EDTA) in Soaps or Synthetic Detergents
volume 15.04
ASTM D1768-89(2003)
Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
volume 15.04
ASTM D1770-94(2000)e1
Standard Test Method for Neps, Vegetable Matter, and Colored Fiber in Wool Top
volume 07.01
ASTM D1776-04
Standard Practice for Conditioning and Testing Textiles
volume 07.01
ASTM D1777-96(2002)
Standard Test Method for Thickness of Textile Materials
volume 07.01
ASTM D1779-98(2004)
Standard Specification for Adhesive for Acoustical Materials
volume 15.06
Adhesives
ASTM D1780-05
Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
volume 15.06
Adhesives
ASTM D1781-98(2004)
Standard Test Method for Climbing Drum Peel for Adhesives
volume 15.06
Adhesives
ASTM D1782-95(2001)
Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
volume 11.02
Water (II)
ASTM D1783-01
Standard Test Methods for Phenolic Compounds in Water
volume 11.02
Water (II)
Strona 81
ASTM D1784-03
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride)
(CPVC) Compounds
volume 08.01
ASTM D1785-05
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
volume 08.04
ASTM D1786-01(2006)e1
Standard Specification for Toluene Diisocyanate
volume 08.01
ASTM D1790-02
Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
volume 08.01
ASTM D1791-93(2004)
Standard Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes
volume 15.04
ASTM D1792-06
Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes
volume 15.04
ASTM D1793-92(2002)
Standard Test Method for Water Spotting of Emulsion Floor Polishes
volume 15.04
ASTM D1795-96(2001)e1
Standard Test Method for Intrinsic Viscosity of Cellulose
volume 06.03
Vehicles
ASTM D1796-04
Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
volume 05.01
ASTM D1799-03a
Standard Practice for Carbon Black—Sampling Packaged Shipments
volume 09.01
ASTM D1807-00(2005)
Standard Test Methods for Refractive Index and Specific Optical Dispersion of Electrical Insulating Liquids
volume 10.03
ASTM D1813-00(2005)
Standard Test Method for Measuring Thickness of Leather Test Specimens
volume 15.04
ASTM D1814-70(2005)
Standard Test Method for Measuring Thickness of Leather Units
volume 15.04
ASTM D1815-00(2005)
Standard Test Method for Water Absorption (Static) of Vegetable Tanned Leather
volume 15.04
ASTM D1816-04
Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE
Electrodes
volume 10.03
ASTM D1817-05
Standard Test Method for Rubber Chemicals—Density
volume 09.01
ASTM D1822-06
Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
volume 08.01
ASTM D1823-95(2001)
Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion
Viscometer
volume 08.01
ASTM D1824-95(2002)
Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
volume 08.01
ASTM D1825-03
Standard Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting
Laminates for Electrical Testing
volume 10.01
ASTM D1826-94(2003)
Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous
Recording Calorimeter
volume 05.06
ASTM D1827-92(2002)
Standard Test Method for Gas Content (Nonacidic) of Insulating Liquids by Displacement with Carbon
Dioxide
volume 10.03
ASTM D1828-01e1
Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
volume 15.06
Adhesives
ASTM D1830-99(2005)
Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by
the Curved Electrode Method
volume 10.01
ASTM D1831-00e1
Standard Test Method for Roll Stability of Lubricating Grease
volume 05.01
ASTM D1832-04
Standard Test Method for Peroxide Number of Petroleum Wax
volume 05.01
ASTM D1833-87(2004)
Standard Test Method for Odor of Petroleum Wax
volume 05.01
ASTM D1835-05
Standard Specification for Liquefied Petroleum (LP) Gases
volume 05.01
ASTM D1836-02
Standard Specification for Commercial Hexanes
volume 06.04
ASTM D1837-02a
Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases
volume 05.01
ASTM D1838-05
Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
volume 05.01
ASTM D1839-91(2005)
Standard Test Method for Amyl Nitrate in Diesel Fuels
volume 05.01
ASTM D1840-03
Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet
Spectrophotometry
volume 05.01
ASTM D1841-63(1998)
Standard Specification for Distilled Coconut Fatty Acids
volume 06.03
Vehicles
ASTM D1842-63(1998)
Standard Specification for Distilled Corn Fatty Acids
volume 06.03
Vehicles
ASTM D1843-63(1998)
Standard Specification for Fractionated and Distilled Cottonseed Fatty Acids
volume 06.03
Vehicles
ASTM D1844-86(2003)
Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate
volume 06.03
Vehicles
ASTM D1845-86(2003)
Standard Test Methods for Chemical Analysis of Strontium Chromate Pigment
volume 06.03
Vehicles
ASTM D1847-93(1998)
Standard Test Methods for Total Chlorine Content of Epoxy Resins
volume 06.03
Vehicles
ASTM D1849-95(2003)
Standard Test Method for Package Stability of Paint
volume 06.02
ASTM D1854-02
Standard Specification for Jet-Fuel-Resistant Concrete Joint Sealer, Hot-Applied Elastic Type
volume 04.03
Systems
ASTM D1856-95a(2003)
Standard Test Method for Recovery of Asphalt From Solution by Abson Method
volume 04.03
Systems
ASTM D1857-04
Standard Test Method for Fusibility of Coal and Coke Ash
volume 05.06
ASTM D1858-63(2000)
Standard Specification for Creosote-Petroleum Solution
volume 04.10
Wood
ASTM D1859-71(2000)
Standard Specification for Petroleum Used for Blending with Creosote
volume 04.10
Wood
ASTM D1860-95(2000)
Standard Test Method for Moisture and Creosote-Type Preservative in Wood
volume 04.10
Wood
ASTM D1863-05
Standard Specification for Mineral Aggregate Used on Built-Up Roofs
volume 04.04
Strona 82
ASTM D1864-89(2002)
Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs
volume 04.04
ASTM D1865-89(2002)
Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs
volume 04.04
ASTM D1867-01
Standard Specification for Copper-Clad Thermosetting Laminates for Printed Wiring
volume 10.01
ASTM D1868-93(1998)
Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of
Insulation Systems
volume 10.01
ASTM D1869-95(2005)
Standard Specification for Rubber Rings for Asbestos-Cement Pipe
volume 09.02
ASTM D1871-04
Standard Test Method for Adhesion Between Tire Bead Wire and Rubber
volume 07.01
ASTM D1874-62(2004)
Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top
Flaps of Fiberboard Shipping Cases
volume 15.06
Adhesives
ASTM D1875-03
Standard Test Method for Density of Adhesives in Fluid Form
volume 15.06
Adhesives
ASTM D1876-01
Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
volume 15.06
Adhesives
ASTM D1879-06
Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation
volume 15.06
Adhesives
ASTM D1881-97(2002)e1
Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
volume 15.05
ASTM D1882-96(2001)
Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive
Vehicles
volume 15.05
ASTM D1883-05
Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
volume 04.08
ASTM D1883-05
Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
volume 04.09
ASTM D1886-03
Standard Test Methods for Nickel in Water
volume 11.01
Water (I)
ASTM D1889-00
Standard Test Method for Turbidity of Water
volume 11.01
Water (I)
ASTM D1890-05
Standard Test Method for Beta Particle Radioactivity of Water
volume 11.02
Water (II)
ASTM D1894-06
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
volume 08.01
ASTM D1895-96(2003)
Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
volume 08.01
ASTM D1896-99(2004)
Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds
volume 08.01
ASTM D1900-94(2002)
Standard Practice for Carbon Black—Sampling Bulk Shipments
volume 09.01
ASTM D1901-00(2004)
Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures
volume 15.05
ASTM D1903-03
Standard Test Method for Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum
Origin, and Askarels
volume 10.03
ASTM D1907-01
Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
volume 07.01
ASTM D1909-04
Standard Table of Commercial Moisture Regains for Textile Fibers
volume 07.01
ASTM D1912-00(2005)e1
Standard Test Method for Cold-Crack Resistance of Upholstery Leather
volume 15.04
ASTM D1913-00(2005)
Standard Test Method for Resistance to Wetting of Garment-Type Leathers (Spray Test)
volume 15.04
ASTM D1914-95(2004)e1
Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
volume 11.03
ASTM D1917-03
Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized
Styrene-Butadiene Rubber (SBR)
volume 09.01
ASTM D1918-95(2004)e1
Standard Test Method for Asbestos Content of Asbestos Textiles
volume 04.05
ASTM D1921-06
Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
volume 08.01
ASTM D1922-06a
Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum
Method
volume 08.01
ASTM D1926-00
Standard Test Methods for Carboxyl Content of Cellulose
volume 06.03
Vehicles
ASTM D1929-96(2001)e1
Standard Test Method for Determining Ignition Temperature of Plastics
volume 08.01
ASTM D1931-99(2004)
Standard Specification for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical
Insulation
volume 10.01
ASTM D1932-04
Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes
volume 10.01
ASTM D1933-03
Standard Specification for Nitrogen Gas as an Electrical Insulating Material
volume 10.03
ASTM D1934-95(2005)
Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
volume 10.03
ASTM D1937-05
Standard Test Method for Carbon Black, Pelleted—Mass Strength
volume 09.01
ASTM D1938-02
Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by
a Single-Tear Method
volume 08.01
ASTM D1941-91(2001)
Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume
volume 11.01
Water (I)
ASTM D1943-05
Standard Test Method for Alpha Particle Radioactivity of Water
volume 11.02
Water (II)
ASTM D1945-03
Standard Test Method for Analysis of Natural Gas by Gas Chromatography
volume 05.06
ASTM D1946-90(2006)
Standard Practice for Analysis of Reformed Gas by Gas Chromatography
volume 05.06
ASTM D1957-86(2001)
Standard Test Method for Hydroxyl Value of Fatty Oils and Acids
volume 06.03
Vehicles
ASTM D1965-87(1998)
Standard Test Method for Unsaponifiable Matter in Drying Oils, Fatty Acids, and Polymerized Fatty Acids
volume 06.03
Vehicles
ASTM D1966-69(1998)
Standard Test Method for Foots in Raw Linseed Oil (Gravimetric Method)
volume 06.03
Vehicles
ASTM D1968-02a
Standard Terminology Relating to Paper and Paper Products
volume 15.09
ASTM D1969-01
Standard Specification for 2-Ethylhexanol
volume 06.04
Strona 83
ASTM D1970-01
Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep
Roofing Underlayment for Ice Dam Protection
volume 04.04
ASTM D1971-02
Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption,
Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
volume 11.01
Water (I)
ASTM D1972-97(2005)
Standard Practice for Generic Marking of Plastic Products
volume 08.01
ASTM D1974-98(2003)
Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
volume 15.09
ASTM D1975-95(2001)e1
Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head
Pails
volume 15.09
ASTM D1976-02
Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission
Spectroscopy
volume 11.01
Water (I)
ASTM D1977-03
Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid
Decomposition and Atomic Spectroscopic Analysis
volume 05.05
ASTM D1978-91(2002)
Standard Guide for Analysis of Electrocoat Bath Samples
volume 06.01
ASTM D1980-87(1998)
Standard Test Method for Acid Value of Fatty Acids and Polymerized Fatty Acids
volume 06.03
Vehicles
ASTM D1981-02
Standard Test Method for Measuring Color After Heating of Tall Oil Fatty Acids
volume 06.03
Vehicles
ASTM D1982-85(2004)
Standard Test Method for Titer of Fatty Acids
volume 06.03
Vehicles
ASTM D1985-03
Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
volume 04.03
Systems
ASTM D1986-91(2002)
Standard Test Method for Determining the Apparent Viscosity of Polyethylene Wax
volume 15.04
ASTM D1987-95(2002)
Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters
volume 04.13
Geosynthetics
ASTM D1988-06
Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes
volume 05.06
ASTM D1990-00(2002)e1
Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from InGrade Tests of Full-Size Specimens
volume 04.10
Wood
ASTM D1991-05
Standard Test Method for Rubber Chemicals—2-Mercaptobenzothiazole (MBT)—Assay
volume 09.01
ASTM D1992-91(2001)
Standard Guide for Testing Synthetic Plasticizers Used in Rubber
volume 09.01
ASTM D1993-03
Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
volume 09.01
ASTM D1994-95(2000)
Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives
volume 15.06
Adhesives
ASTM D1995-92(2004)
Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
volume 15.06
Adhesives
ASTM D1996-97(2003)
Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low
Density Polyethylene Using Liquid Chromatography (LC)
volume 08.01
ASTM D1997-91(2001)
Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
volume 04.08
ASTM D1998-04
Standard Specification for Polyethylene Upright Storage Tanks
volume 08.01
ASTM D2000-06
Standard Classification System for Rubber Products in Automotive Applications
volume 09.02
ASTM D2001-92(2002)
Standard Test Method for Depentanization of Gasoline and Naphthas
volume 05.01
ASTM D2007-03
Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other
Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
volume 05.01
ASTM D2008-91(2001)
Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
volume 05.01
Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide
Technique
volume 11.03
ASTM D2013-04
Standard Practice of Preparing Coal Samples for Analysis
volume 05.06
ASTM D2014-97(2004)
Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
volume 05.06
ASTM D2017-05
Standard Test Method of Accelerated Laboratory Test of Natural Decay Resistance of Woods
volume 04.10
Wood
ASTM D2019-97(2002)
Standard Test Method for Dirt in Paper and Paperboard
volume 15.09
ASTM D2020-92(2003)
Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard
volume 15.09
ASTM D2022-89(2003)
Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches
volume 15.04
ASTM D2023-89(2003)
Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents
volume 15.04
ASTM D2024-65(2003)
Standard Test Method for Cloud Point of Nonionic Surfactants
volume 15.04
ASTM D2026-97(2004)
Standard Specification for Cutback Asphalt (Slow-Curing Type)
volume 04.03
Systems
ASTM D2027-97(2004)
Standard Specification for Cutback Asphalt (Medium-Curing Type)
volume 04.03
Systems
ASTM D2028-97(2004)
Standard Specification for Cutback Asphalt (Rapid-Curing Type)
volume 04.03
Systems
ASTM D2029-97(2003)
Standard Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew
Point
volume 10.03
ASTM D2035-80(2003)
Standard Practice for Coagulation-Flocculation Jar Test of Water
volume 11.02
Water (II)
ASTM D2036-06
Standard Test Methods for Cyanides in Water
volume 11.02
Water (II)
ASTM D2041-03a
Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
volume 04.03
Systems
ASTM D2042-01
Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
volume 04.03
Systems
ASTM D2043-94(2002)
Standard Test Method for Silver Tarnishing by Paper
volume 15.09
ASTM D2047-04
Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by
the James Machine
volume 15.04
ASTM
D2010/D2010M98(2004)
Strona 84
ASTM D2048-92(2002)
Standard Test Method for Powdering of Floor Polish Films
volume 15.04
ASTM D2050-04
Standard Terminology Relating to Subassemblies
volume 07.01
ASTM D2051-03
Standard Test Method for Durability of Finish of Zippers to Laundering
volume 07.01
ASTM D2052-05
Standard Test Method for Colorfastness of Zippers to Drycleaning
volume 07.01
ASTM D2053-99(2004)
Standard Test Method for Colorfastness of Zippers to Light
volume 07.01
ASTM D2054-99(2004)
Standard Test Method for Colorfastness of Zipper Tapes to Crocking
volume 07.01
ASTM D2057-05
Standard Test Method for Colorfastness of Zippers to Laundering
volume 07.01
ASTM D2058-03
Standard Test Method for Durability of Finish of Zippers to Drycleaning
volume 07.01
ASTM D2059-03
Standard Test Method for Resistance of Zippers to Salt Spray (Fog)
volume 07.01
ASTM D2060-00(2005)e1
Standard Test Methods for Measuring Zipper Dimensions
volume 07.01
ASTM D2061-03
Standard Test Methods for Strength Tests for Zippers
volume 07.01
ASTM D2062-03
Standard Test Methods for Operability of Zippers
volume 07.01
ASTM D2063-91(2002)
Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread
Closures
volume 15.09
ASTM D2064-91(2003)
Standard Test Method for Print Resistance of Architectural Paints
volume 06.02
ASTM D2065-03
Standard Test Method for Determination of Edge Performance of Composite Wood Products Under
Surfactant Accelerated Moisture Stress
volume 06.02
ASTM D2066-03e1
Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
volume 06.02
ASTM D2067-97(2003)
Standard Test Method for Coarse Particles in Printing Ink Dispersions
volume 06.02
ASTM D2068-04
Standard Test Method for Filter Plugging Tendency of Distillate Fuel Oils
volume 05.01
ASTM D2070-91(2001)
Standard Test Method for Thermal Stability of Hydraulic Oils
volume 05.01
ASTM D2071-87(1998)
Standard Test Methods for Fatty Nitrogen Products
volume 06.03
Vehicles
ASTM D2072-92(1998)e1
Standard Test Method for Water in Fatty Nitrogen Compounds
volume 06.03
Vehicles
ASTM D2073-92(1998)e1
Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines,
Amidoamines, and Diamines by Referee Potentiometric Method
volume 06.03
Vehicles
ASTM D2074-92(1998)
Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by
Alternative Indicator Method
volume 06.03
Vehicles
ASTM D2075-92(1998)
Standard Test Method for Iodine Value of Fatty Amines, Amidoamines, and Diamines
volume 06.03
Vehicles
ASTM D2076-92(1998)
Standard Test Methods for Acid Value and Amine Value of Fatty Quaternary Ammonium Chlorides
volume 06.03
Vehicles
ASTM D2077-92(1998)
Standard Test Method for Ash in Fatty Quaternary Ammonium Chlorides
volume 06.03
Vehicles
ASTM D2079-92(1998)
Standard Test Method for Nonvolatile Matter (Solids) in Fatty Quaternary Ammonium Chlorides
volume 06.03
Vehicles
ASTM D2080-92(1998)
Standard Test Method for Average Molecular Weight of Fatty Quaternary Ammonium Chlorides
volume 06.03
Vehicles
ASTM D2081-92(1998)
Standard Test Method for pH of Fatty Quaternary Ammonium Chlorides
volume 06.03
Vehicles
ASTM D2082-92(1998)
Standard Test Method for Percent of Non-Amines in Fatty Nitrogen Compounds
volume 06.03
Vehicles
ASTM D2083-92(1998)
Standard Test Method for Calculation of Percent of Primary, Secondary, and Tertiary Amines in Fatty Amines
volume 06.03
Vehicles
ASTM D2084-01
Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
volume 09.01
ASTM D2085-89(2002)
Standard Test Method for Determining Chloride Used in Calculating Pentachlorophenol in Solutions or Wood
(Lime Ignition Method)
volume 04.10
Wood
ASTM D2086-03
Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde
volume 06.04
ASTM D2087-97(2001)
Standard Test Method for Iron in Formaldehyde Solutions
volume 06.04
ASTM D2090-98
Standard Test Method for Clarity and Cleanness of Paint and Ink Liquids
volume 06.03
Vehicles
ASTM D2091-96(2003)
Standard Test Method for Print Resistance of Lacquers
volume 06.02
ASTM D2092-95(2001)e1
Standard Guide for Preparation of Zinc-Coated (Galvanized) Steel Surfaces for Painting
volume 06.02
ASTM D2093-03
Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
volume 15.06
Adhesives
ASTM D2094-00e1
Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
volume 15.06
Adhesives
ASTM D2095-96(2002)
Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
volume 15.06
Adhesives
ASTM D2096-00(2005)e1
Standard Test Method for Colorfastness and Transfer of Color in the Washing of Leather
volume 15.04
ASTM D2097-03(2005)
Standard Test Method for Flex Testing of Finish on Upholstery Leather
volume 15.04
ASTM D2098-04
Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Dow Corning Leather
Tester
volume 15.04
ASTM D2099-05
Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water
Penetration Tester
volume 15.04
ASTM D2100-95(2004)e1
Standard Specification for Asbestos Textiles Used for Electrical Insulating Purposes
volume 04.05
Strona 85
ASTM D2102-02
Standard Test Method for Shrinkage of Textile Fibers (Bundle Test)
volume 07.01
ASTM D2103-05
Standard Specification for Polyethylene Film and Sheeting
volume 08.01
ASTM D2104-03
Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40
volume 08.04
ASTM D2105-01
Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced
Thermosetting-Resin) Pipe and Tube
volume 08.04
ASTM D2106-05
Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic
Solvents
volume 15.05
ASTM D2108-05
Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt
Scale)
volume 15.05
ASTM D2109-01(2006)
Standard Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures
volume 15.05
ASTM D2110-00(2006)
Standard Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures
volume 15.05
ASTM D2111-02
Standard Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their
Admixtures
volume 15.05
ASTM D2112-01a
Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel
volume 10.03
ASTM D2113-99
Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
volume 04.08
ASTM D2115-04
Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions
volume 08.01
ASTM D2116-02
Standard Specification for FEP-Fluorocarbon Molding and Extrusion Materials
volume 08.01
ASTM D2118-05
Standard Practice for Assigning a Standard Commercial Moisture Content for Wool and its' Products
volume 07.01
ASTM D2119-03
Standard Test Method for Aldehydes in Styrene Monomer
volume 06.04
ASTM D2121-00
Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)
volume 06.04
ASTM D2122-98(2004)
Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
volume 08.04
ASTM D2124-99(2004)
Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared
Spectrophotometric Technique
volume 08.01
ASTM D2126-04
Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
volume 08.01
ASTM D2129-05
Standard Test Method for Color of Clear Electrical Insulating Liquids (Platinum-Cobalt Scale)
volume 10.03
ASTM D2130-90(2001)
Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection
volume 07.01
ASTM D2131-97(2003)
Standard Specification for Natural Muscovite Mica Splittings
volume 10.01
ASTM D2132-03
Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
volume 10.01
ASTM D2134-93(2001)
Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
volume 06.01
ASTM D2136-02e1
Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
volume 09.01
ASTM D2137-05
Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics
volume 09.01
ASTM D2140-03
Standard Test Method for Carbon-Type Composition of Insulating Oils of Petroleum Origin
volume 10.03
ASTM D2143-00(2005)e1
Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
volume 08.04
ASTM D2144-01e1
Standard Test Methods for Examination of Electrical Insulating Oils by Infrared Absorption
volume 10.03
ASTM D2148-02
Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
volume 10.01
ASTM D2149-97(2004)
Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic
Dielectrics At Frequencies To 10 MHz And Temperatures To 500°C
volume 10.01
ASTM D2152-95(2003)
Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded
Fittings by Acetone Immersion
volume 08.04
ASTM D2156-94(2003)
Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
volume 05.01
ASTM D2157-94(2003)
Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases From Burning Distillate Fuels
volume 05.01
ASTM D2158-05
Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
volume 05.01
ASTM D2161-05
Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol
Viscosity
volume 05.01
ASTM D2162-99(2004)
Standard Test Method for Basic Calibration of Master Viscometers and Viscosity Oil Standards
volume 05.01
ASTM D2165-94(2000)
Standard Test Method for pH of Aqueous Extracts of Wool and Similar Animal Fibers
volume 07.01
ASTM D2166-00e1
Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
volume 04.08
ASTM D2167-94(2001)
Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
volume 04.08
ASTM D2168-02a
Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
volume 04.08
ASTM D2170-01a
Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)
volume 04.03
Systems
ASTM D2171-01
Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
volume 04.03
Systems
ASTM D2172-05
Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
volume 04.03
Systems
ASTM D2175-97(2002)
Standard Test Method for Book Bulk and Book Bulking Number of Paper
volume 15.09
ASTM D2176-97a(2002)
Standard Test Method for Folding Endurance of Paper by the M.I.T. Tester
volume 15.09
ASTM D2177-99(2003)
Standard Test Method for Ink Absorption of Blotting Paper
volume 15.09
ASTM D2178-04
Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
volume 04.04
ASTM D2180-89(2003)
Standard Test Method for Active Oxygen in Bleaching Compounds
volume 15.04
ASTM D2186-05
Standard Test Methods for Deposit-Forming Impurities in Steam
volume 11.02
Water (II)
Strona 86
ASTM D2187-94(2004)
Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins
volume 11.02
Water (II)
ASTM D2190-97(2001)
Standard Specification for Vinyl Acetate
volume 06.04
ASTM D2191-97(2001)
Standard Test Method for Acetaldehyde Content of Vinyl Acetate
volume 06.04
ASTM D2192-96(2000)
Standard Test Method for Purity of Aldehydes and Ketones
volume 06.04
ASTM D2193-97(2001)
Standard Test Method for Hydroquinone in Vinyl Acetate
volume 06.04
ASTM D2194-02
Standard Test Method for Concentration of Formaldehyde Solutions
volume 06.04
ASTM D2195-05
Standard Test Methods for Pentaerythritol
volume 06.04
ASTM D2196-05
Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield
type) Viscometer
volume 06.01
ASTM D2197-98(2004)
Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
volume 06.01
ASTM D2199-03
Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers
volume 06.02
ASTM D2200-95(2001)e1
Standard Pictorial Surface Preparation Standards for Painting Steel Surfaces
volume 06.02
ASTM D2201-99
Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and
Related Coating Products
volume 06.01
ASTM D2202-00(2006)
Standard Test Method for Slump of Sealants
volume 04.07
Dimension Stone
ASTM D2203-01
Standard Test Method for Staining from Sealants
volume 04.07
Dimension Stone
ASTM D2205-85(2004)
Standard Guide for Selection of Tests for Traffic Paints
volume 06.02
ASTM D2207-00(2005)
Standard Test Method for Bursting Strength of Leather by the Ball Method
volume 15.04
ASTM D2208-00(2005)
Standard Test Method for Breaking Strength of Leather by the Grab Method
volume 15.04
ASTM D2209-00(2004)
Standard Test Method for Tensile Strength of Leather
volume 15.04
ASTM D2210-00(2004)
Standard Test Method for Grain Crack and Extension of Leather by the Mullen Test
volume 15.04
ASTM D2211-00(2005)
Standard Test Method for Elongation of Leather
volume 15.04
ASTM D2212-00(2005)
Standard Test Method for Slit Tear Resistance of Leather
volume 15.04
ASTM D2213-00(2005)
Standard Test Method for Compressibility of Leather
volume 15.04
ASTM D2214-02
Standard Test Method for Estimating the Thermal Conductivity of Leather with the Cenco-Fitch Apparatus
volume 15.04
ASTM D2216-05
Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
volume 04.08
ASTM D2217-85(1998)
Standard Practice for Wet Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil
Constants
volume 04.08
ASTM D2218-67(2002)
Standard Specification for Molybdate Orange Pigments
volume 06.03
Vehicles
ASTM D2219-02
Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation
volume 10.01
ASTM D2220-02
Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation
volume 10.01
ASTM D2221-01
Standard Test Method for Creep Properties of Package Cushioning Materials
volume 15.09
ASTM D2222-94(2004)
Standard Test Method for Methanol Extract of Vinyl Chloride Resins
volume 08.01
ASTM D2225-04
Standard Test Methods for Silicone Fluids Used for Electrical Insulation
volume 10.03
ASTM D2226-93(2002)
Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use
volume 09.01
ASTM D2227-96(2002)
Standard Specification for Natural Rubber (NR) Technical Grades
volume 09.01
ASTM D2228-04e1
Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method
volume 09.01
ASTM D2229-04
Standard Test Method for Adhesion Between Steel Tire Cords and Rubber
volume 07.01
ASTM D2230-96(2002)e1
Standard Test Method for Rubber Property-Extrudability of Unvulcanized Compounds
volume 09.01
ASTM D2234/D2234M-03e1
Standard Practice for Collection of a Gross Sample of Coal
volume 05.06
ASTM D2235-04
Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
volume 08.04
ASTM D2238-92(2004)
Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm
volume 08.01
ASTM D2239-03
Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
volume 08.04
ASTM D2240-05
Standard Test Method for Rubber Property—Durometer Hardness
volume 09.01
ASTM D2241-05
Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
volume 08.04
ASTM D2243-95(2003)
Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings
volume 06.02
ASTM D2244-05
Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured
Color Coordinates
volume 06.01
ASTM D2245-90(2005)
Standard Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints
volume 06.01
ASTM D2247-02
Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
volume 06.01
ASTM D2248-01a
Standard Practice for Detergent Resistance of Organic Finishes
volume 06.01
ASTM D2251-96(2004)
Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures
volume 15.05
ASTM D2252-05
Standard Specification for Fineness of Types of Alpaca
volume 07.01
ASTM D2255-02e1
Standard Test Method for Grading Spun Yarns for Appearance
volume 07.01
Strona 87
ASTM D2256-02
Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
volume 07.01
ASTM D2257-98(2004)
Standard Test Method for Extractable Matter in Textiles
volume 07.01
ASTM D2258-99(2005)
Standard Practice for Sampling Yarn for Testing
volume 07.01
ASTM D2259-02(2006)e1
Standard Test Method for Shrinkage of Yarns
volume 07.01
ASTM D2260-03
Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering
Systems
volume 07.01
ASTM D2261-96(2002)
Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (ConstantRate-of-Extension Tensile Testing Machine)
volume 07.01
ASTM D2265-00
Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
volume 05.01
ASTM D2266-01
Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
volume 05.01
ASTM D2268-93(2003)e1
Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas
Chromatography
volume 05.01
ASTM D2269-99(2005)
Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
volume 05.01
ASTM D2270-04
Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C
volume 05.01
ASTM D2272-02
Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
volume 05.01
ASTM D2273-05
Standard Test Method for Trace Sediment in Lubricating Oils
volume 05.01
ASTM D2274-03a
Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
volume 05.01
ASTM D2275-01
Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial
Discharges (Corona) on the Surface
volume 10.01
ASTM D2276-05
Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
volume 05.01
ASTM D2278-06
Standard Test Method for Field Evaluation of Wood Preservatives in Round Post-Size Specimens
volume 04.10
Wood
ASTM D2281-68(2005)
Standard Test Method for Evaluation of Wetting Agents by the Skein Test
volume 15.04
ASTM D2282-99(2005)
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe
volume 08.04
ASTM D2284-95(2002)
Standard Test Method for Acidity of Sulfur Hexafluoride
volume 10.03
ASTM D2285-99
Standard Test Method for Interfacial Tension of Electrical Insulating Oils of Petroleum Origin Against Water
by the Drop-Weight Method
volume 10.03
ASTM D2287-96(2001)
Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion
Compounds
volume 08.01
ASTM D2288-97(2001)
Standard Test Method for Weight Loss of Plasticizers on Heating
volume 08.01
ASTM D2290-04
Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk
Method
volume 08.04
ASTM D2291-03
Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
volume 08.01
ASTM D2293-96(2002)
Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
volume 15.06
Adhesives
ASTM D2294-96(2002)
Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
volume 15.06
Adhesives
ASTM D2295-96(2002)
Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated
Temperatures (Metal-to-Metal)
volume 15.06
Adhesives
ASTM D2296-01
Standard Specification for Continuity of Quality of Electrical Insulating Polybutene Oil for Capacitors
volume 10.03
ASTM D2300-00
Standard Test Method for Gassing of Insulating Liquids Under Electrical Stress and Ionization (Modified
Pirelli Method)
volume 10.03
ASTM D2301-99(2004)
Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
volume 10.01
ASTM D2303-97(2004)
Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
volume 10.01
ASTM D2304-97(2002)
Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
volume 10.01
ASTM D2305-02
Standard Test Methods for Polymeric Films Used for Electrical Insulation
volume 10.01
ASTM D2307-05
Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
volume 10.01
ASTM D2308-02
Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
volume 10.01
ASTM D2310-01
Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
volume 08.04
ASTM D2318-98(2003)
Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
volume 05.01
ASTM D2319-98(2003)
Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)
volume 05.01
ASTM D2320-98(2003)
Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
volume 05.01
ASTM D2321-05
Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow
Applications
volume 08.04
ASTM D2322-00(2005)
Standard Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration
volume 15.04
ASTM D2325-68(2000)
Standard Test Method for Capillary-Moisture Relationships for Coarse- and Medium-Textured Soils by
Porous-Plate Apparatus
volume 04.08
ASTM D2330-02
Standard Test Method for Methylene Blue Active Substances
volume 11.02
Water (II)
ASTM D2331-80(2003)
Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits
volume 11.02
Water (II)
ASTM D2332-84(2003)
Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
volume 11.02
Water (II)
ASTM D2336-99
Standard Guide for Specifying Factory Applied Wood Coatings
volume 06.02
ASTM D2337-01(2005)
Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers
volume 06.02
ASTM D2338-02
Standard Test Method for Determining Particle Size of Multicolor Lacquers
volume 06.02
ASTM D2339-98(2004)
Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by
Tension Loading
volume 15.06
Adhesives
Strona 88
ASTM D2340-03
Standard Test Method for Peroxides in Styrene Monomer
volume 06.04
ASTM D2343-03
Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced
Plastics
volume 08.01
Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
volume 15.03
Composite Materials
ASTM D2346-00(2004)
Standard Test Method for Apparent Density of Leather
volume 15.04
ASTM D2347-00(2005)
Standard Test Method for Measuring Area of Leather Test Specimens
volume 15.04
ASTM D2348-02
Standard Test Method for Arsenic in Paint
volume 06.01
ASTM D2349-90(2003)
Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible
Paints
volume 06.01
ASTM D2350-90(2005)
Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints
volume 06.01
ASTM D2351-90(2005)
Standard Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints
volume 06.01
ASTM D2352-85(2005)
Standard Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints
volume 06.01
ASTM D2354-98
Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
volume 06.03
Vehicles
ASTM D2357-74(2003)
Standard for Qualitative Classification of Surfactants by Infrared Absorption
volume 15.04
ASTM D2358-89(2003)
Standard Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions
volume 15.04
ASTM D2359-02
Standard Specification for Refined Benzene-535
volume 06.04
ASTM D2360-04a
Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
volume 06.04
ASTM D2361-02
Standard Test Method for Chlorine in Coal
volume 05.06
ASTM D2363-79(2000)e1
Standard Test Methods for Hydroxypropyl Methylcellulose
volume 06.03
Vehicles
ASTM D2364-01
Standard Test Methods for Hydroxyethylcellulose
volume 06.03
Vehicles
ASTM D2369-04
Standard Test Method for Volatile Content of Coatings
volume 06.01
ASTM D2370-98(2002)
Standard Test Method for Tensile Properties of Organic Coatings
volume 06.01
ASTM D2371-85(2005)
Standard Test Method for Pigment Content of Solvent-Reducible Paints
volume 06.01
ASTM D2372-85(2005)
Standard Practice for Separation of Vehicle From Solvent-Reducible Paints
volume 06.01
ASTM D2373-05
Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method
volume 06.01
ASTM D2374-05
Standard Test Method for Lead in Paint Driers by EDTA Method
volume 06.01
ASTM D2375-05
Standard Test Method for Manganese in Paint Driers by EDTA Method
volume 06.01
ASTM D2377-00
Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
volume 04.07
Dimension Stone
ASTM D2378-02
Standard Specification for Formaldehyde 50% Grade Uninhibited and 37% Grade Inhibited and Uninhibited
volume 06.04
ASTM D2379-04
Standard Test Method for Acidity of Formaldehyde Solutions
volume 06.04
ASTM D2380-04
Standard Test Method for Methanol Content of Formaldehyde Solutions
volume 06.04
ASTM D2383-97(2001)
Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under
Humid Conditions
volume 08.01
ASTM D2384-83(2004)
Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures
volume 05.01
ASTM D2386-05
Standard Test Method for Freezing Point of Aviation Fuels
volume 05.01
ASTM D2392-96(2001)e1
Standard Test Method for Color Of Dyed Aviation Gasolines
volume 05.01
ASTM D2394-05
Standard Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring
volume 04.10
Wood
ASTM D2395-02
Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
volume 04.10
Wood
ASTM D2396-94(2004)
Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque
Rheometer
volume 08.01
ASTM D2397-05
Standard Specification for Cationic Emulsified Asphalt
volume 04.03
Systems
ASTM D2399-83(2005)
Standard Practice for Selection of Cutback Asphalts
volume 04.03
Systems
ASTM D2400-99(2004)
Standard Specification for Varnished Glass-Polyester Cloth Used for Electrical Insulation
volume 10.01
ASTM D2402-01
Standard Test Method for Water Retention of Textile Fibers (Centrifuge Procedure)
volume 07.01
ASTM D2403-96(2003)e1
Standard Specification for Refined Phthalic Anhydride-1308
volume 06.04
ASTM D2412-02
Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate
Loading
volume 08.04
ASTM D2413-99(2005)
Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric
volume 10.01
ASTM D2414-05a
Standard Test Method for Carbon Black—Oil Absorption Number (OAN)
volume 09.01
ASTM D2415-98(2003)
Standard Test Method for Ash in Coal Tar and Pitch
volume 05.01
ASTM D2416-84(2004)
Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)
volume 05.01
ASTM D2419-02
Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
volume 04.03
Systems
ASTM D2420-91(2001)
Standard Test Method for Hydrogen Sulfide In Liquefied Petroleum (LP) Gases (Lead Acetate Method)
volume 05.01
ASTM
D2344/D2344M00(2006)
Strona 89
ASTM D2421-02
Standard Practice for Interconversion of Analysis of C5and Lighter Hydrocarbons to Gas-Volume, LiquidVolume, or Weight Basis
volume 05.01
ASTM D2422-97(2002)
Standard Classification of Industrial Fluid Lubricants by Viscosity System
volume 05.01
ASTM D2423-90(2002)
Standard Test Method for Surface Wax on Waxed Paper or Paperboard
volume 05.01
ASTM D2425-04
Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
volume 05.01
ASTM D2426-93(2004)e1
Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
volume 05.01
ASTM D2427-92(2001)
Standard Test Method for Determination of C2through C5Hydrocarbons in Gasolines by Gas
Chromatography
volume 05.01
ASTM D2433-93(2002)
Standard Test Methods for Rubber Thread
volume 09.02
ASTM D2434-68(2000)
Standard Test Method for Permeability of Granular Soils (Constant Head)
volume 04.08
ASTM D2435-04
Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
volume 04.08
ASTM D2439-96(2003)e1
Standard Specification for Refined Phenol
volume 06.04
ASTM D2440-99(2004)
Standard Test Method for Oxidation Stability of Mineral Insulating Oil
volume 10.03
ASTM D2442-75(2001)
Standard Specification for Alumina Ceramics for Electrical and Electronic Applications
volume 15.02
ASTM D2444-99(2005)
Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by
Means of a Tup (Falling Weight)
volume 08.04
ASTM D2447-03
Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter
volume 08.04
ASTM D2448-85(2002)
Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the
Leachate of the Pigment
volume 06.03
Vehicles
ASTM D2449-88(2001)
Standard Specification for Rubber Bales From Natural Sources—Limit on Coating
volume 09.01
ASTM D2452-03
Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
volume 04.07
Dimension Stone
ASTM D2453-03
Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
volume 04.07
Dimension Stone
ASTM D2454-95(2002)
Standard Practice for Determining the Effect of Overbaking on Organic Coatings
volume 06.01
ASTM D2457-03
Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
volume 08.01
ASTM D2460-05
Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water
volume 11.02
Water (II)
ASTM D2462-90(2001)
Standard Test Method for Moisture in Wool by Distillation With Toluene
volume 07.01
ASTM D2463-95(2005)
Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
volume 08.01
ASTM D2464-99e1
Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
volume 08.04
ASTM D2466-05
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
volume 08.04
ASTM D2467-05
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
volume 08.04
ASTM D2471-99
Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins
volume 08.01
ASTM D2472-00
Standard Specification for Sulfur Hexafluoride
volume 10.03
ASTM D2475-01
Standard Specification for Felt
volume 07.01
ASTM D2477-02e1
Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at
Commercial Power Frequencies
volume 10.03
ASTM D2481-05
Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means of
Small Size Specimens
volume 04.10
Wood
ASTM D2482-97(2002)
Standard Test Method for Surface Strength of Paper (Wax Pick Method)
volume 15.09
ASTM D2484-00
Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape
volume 10.01
ASTM D2485-91(2000)
Standard Test Methods for Evaluating Coatings For High Temperature Service
volume 06.01
ASTM D2486-00
Standard Test Methods for Scrub Resistance of Wall Paints
volume 06.02
ASTM D2487-00
Standard Classification of Soils for Engineering Purposes (Unified Soil Classification System)
volume 04.08
ASTM D2488-00
Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)
volume 04.08
ASTM D2489-02
Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
volume 04.03
Systems
ASTM D2492-02
Standard Test Method for Forms of Sulfur in Coal
volume 05.06
ASTM D2493-01e1
Standard Viscosity-Temperature Chart for Asphalts
volume 04.03
Systems
ASTM D2494-02
Standard Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple Fiber or Tow
volume 07.01
ASTM D2495-01
Standard Test Method for Moisture in Cotton by Oven-Drying
volume 07.01
ASTM D2497-01
Standard Tolerances for Man-Made Organic-Base Filament Single Yarns
volume 07.01
ASTM D2500-05
Standard Test Method for Cloud Point of Petroleum Products
volume 05.01
ASTM D2501-91(2005)
Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
volume 05.01
ASTM D2502-04
Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From
Viscosity Measurements
volume 05.01
ASTM D2503-92(2002)e1
Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric
Measurement of Vapor Pressure
volume 05.01
ASTM D2504-88(2004)e1
Standard Test Method for Noncondensable Gases in C2and Lighter Hydrocarbon Products by Gas
Chromatography
volume 05.01
ASTM D2505-88(2004)e1
Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by
Gas Chromatography
volume 05.01
ASTM D2509-03
Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)
volume 05.01
Strona 90
ASTM D2510-94(1998)
Standard Test Method for Adhesion of Solid Film Lubricants
volume 05.01
ASTM D2511-93(2003)
Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants
volume 05.01
ASTM D2512-95(2002)
Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and
Pass-Fail Techniques)
volume 14.04
Laboratory Apparatus; Degradation of
Materials; Filtration; SI; Oxygen Fire Safety
ASTM D2513-05
Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
volume 08.04
ASTM D2517-05
Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
volume 08.04
ASTM D2518-99(2004)
Standard Specification for Woven Glass Fabrics for Electrical Insulation
volume 10.02
Electrical Insulation (II): D2518 - latest
ASTM D2519-02
Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
volume 10.02
ASTM D2520-01
Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials
at Microwave Frequencies and Temperatures to 1650oC
volume 10.02
ASTM D2521-76(2002)e1
Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining
volume 04.04
ASTM D2522-03
Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
volume 10.03
ASTM D2523-00
Standard Practice for Testing Load-Strain Properties of Roofing Membranes
volume 04.04
ASTM D2524-95(2003)
Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method- 1/8-in. (3.2-mm) Gage
Length
volume 07.01
ASTM D2525-90(2001)
Standard Practice for Sampling Wool for Moisture
volume 07.01
ASTM D2527-83(2001)
Standard Specification for Rubber Seals-Splice Strength
volume 09.02
ASTM D2532-03
Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft
Turbine Lubricants
volume 05.01
ASTM D2533-99
Standard Test Method for Vapor-Liquid Ratio of Spark-Ignition Engine Fuels
volume 05.01
ASTM D2534-88(2004)
Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings
volume 05.01
ASTM D2538-02
Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
volume 08.01
ASTM D2549-02
Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of HighBoiling Oils by Elution Chromatography
volume 05.01
ASTM D2555-06
Standard Practice for Establishing Clear Wood Strength Values
volume 04.10
Wood
ASTM D2556-93a(2005)
Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties
volume 15.06
Adhesives
ASTM D2557-98(2004)
Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from
-267.8 to -55°C (-450 to -67°F)
volume 15.06
Adhesives
ASTM D2559-04
Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet
Use) Exposure Conditions
volume 15.06
Adhesives
ASTM D2561-95(2005)
Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers
volume 08.01
ASTM D2562-94(2002)e1
Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics
volume 08.01
ASTM D2563-94(2002)e1
Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
volume 08.01
ASTM D2564-04
Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
volume 08.04
ASTM D2565-99
Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications
volume 08.01
ASTM D2569-97(2002)e1
Standard Test Method for Distillation of Pitch
volume 05.01
ASTM D2570-96(2002)e1
Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
volume 15.05
ASTM D2572-97(2003)e1
Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers
volume 06.03
Vehicles
ASTM D2573-01
Standard Test Method for Field Vane Shear Test in Cohesive Soil
volume 04.08
ASTM D2574-00
Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms
volume 06.01
ASTM D2575-70(1998)
Standard Method for Testing Polymerized Fatty Acids
volume 06.03
Vehicles
ASTM D2578-04a
Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
volume 08.01
ASTM D2580-94(2001)
Standard Test Method for Phenols in Water by Gas-Liquid Chromatography
volume 11.02
Water (II)
ASTM D2581-02
Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials
volume 08.01
ASTM D2582-03
Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
volume 08.01
ASTM D2583-95(2001)e1
Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
volume 08.01
ASTM D2584-02
Standard Test Method for Ignition Loss of Cured Reinforced Resins
volume 08.01
ASTM D2589-88(2002)e2
Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber
volume 04.05
ASTM D2590-98(2002)e1
Standard Test Method for Sampling Chrysotile Asbestos
volume 04.05
ASTM D2591-01
Method of Test for Linear Density of Elastomeric Yarn (Short Length Speciments)
volume 07.01
ASTM D2593-93(2004)e1
Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
volume 05.01
ASTM D2594-04
Standard Test Method for Stretch Properties of Knitted Fabrics Having Low Power
volume 07.01
ASTM D2595-96(2002)e1
Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
volume 05.01
ASTM D2596-97(2002)e1
Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball
Method)
volume 05.01
ASTM D2597-94(2004)
Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and
Carbon Dioxide by Gas Chromatography
volume 05.01
ASTM D2598-02
Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from
Compositional Analysis
volume 05.01
Strona 91
ASTM D2603-01
Test Method for Sonic Shear Stability of Polymer-Containing Oils
volume 05.01
ASTM D2604-86(2000)
Standard Specification for High-Boiling Hydrocarbon Solvent for Preparing Oil-Borne Preservative Solutions
volume 04.10
Wood
ASTM D2606-94(2000)
Standard Test Method for Solubility of Pentachlorophenol in Heavy Hydrocarbon Solvents
volume 04.10
Wood
ASTM D2609-02
Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
volume 08.04
ASTM D2612-99(2005)
Standard Test Method for Fiber Cohesion in Sliver and Top in Static Tests
volume 07.01
ASTM D2613-01
Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method
volume 06.01
ASTM D2616-96(2003)
Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
volume 06.01
ASTM D2617-96(2001)
Standard Test Method for Total Ash in Leather
volume 15.04
ASTM D2619-95(2002)e1
Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
volume 05.01
ASTM D2621-87(2005)
Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
volume 06.01
ASTM D2622-05
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence
Spectrometry
volume 05.01
ASTM D2624-02
Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
volume 05.01
ASTM D2625-94(2003)
Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants
(Falex Pin and Vee Method)
volume 05.01
ASTM D2626-04
Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
volume 04.04
ASTM D2627-02
Standard Specification for Diacetone Alcohol
volume 06.04
ASTM D2628-91(2005)
Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
volume 04.03
Systems
ASTM D2632-01
Standard Test Method for Rubber Property—Resilience by Vertical Rebound
volume 09.01
ASTM D2633-02
Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
volume 10.02
ASTM D2634-02
Standard Specification for Methyl Amyl Acetate (95% Grade)
volume 06.04
ASTM D2635-01
Standard Specification for Methyl Isobutyl Carbinol
volume 06.04
ASTM D2636-01
Standard Specification for Hexylene Glycol
volume 06.04
ASTM D2638-91(2002)
Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
volume 05.01
ASTM D2639-04e1
Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer
volume 05.06
ASTM D2643-04
Standard Specification for Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type)
volume 04.13
Geosynthetics
ASTM D2644-02
Standard Tolerances for Yarns Spun on the Woolen System
volume 07.01
ASTM D2645-95(2001)
Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems
volume 07.01
ASTM D2646-05
Standard Test Methods for Backing Fabric Characteristics of Pile Yarn Floor Coverings
volume 07.01
ASTM D2647-05a
Standard Specification for Crosslinkable Ethylene Plastics
volume 08.01
ASTM D2649-04
Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
volume 05.01
ASTM D2650-04
Standard Test Method for Chemical Composition of Gases By Mass Spectrometry
volume 05.01
ASTM D2651-01
Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
volume 15.06
Adhesives
ASTM D2652-05a
Standard Termninology Relating to Activated Carbon
volume 15.01
Ceramics
ASTM D2653-01
Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
volume 07.01
ASTM D2655-00
Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
volume 10.02
ASTM D2656-00
Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V
volume 10.02
ASTM D2657-03
Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
volume 08.04
ASTM D2658-04
Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)
volume 15.09
ASTM D2659-95(2005)
Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers
volume 08.01
ASTM D2661-02
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and
Vent Pipe and Fittings
volume 08.04
ASTM D2663-95a(2000)e1
Standard Test Methods for Carbon Black-Dispersion in Rubber
volume 09.01
ASTM D2665-04ae2
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
volume 08.04
ASTM D2667-95(2001)
Standard Test Method for Biodegradability of Alkylbenzene Sulfonates
volume 11.06
Biological Effects and Environmental Fate;
Biotechnology
ASTM D2668-02e1
Standard Test Method for 2,6-di-tert-Butyl-p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by
Infrared Absorption
volume 10.03
ASTM D2670-95(2004)
Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)
volume 05.01
ASTM D2671-00
Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
volume 10.02
ASTM D2672-96a(2003)
Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement
volume 08.04
ASTM D2673-04
Standard Specification for Oriented Polypropylene Film
volume 08.01
ASTM D2674-72(2004)e1
Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
volume 15.06
Adhesives
ASTM D2680-01
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite
Sewer Piping
volume 08.04
ASTM D2683-04
Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene
Pipe and Tubing
volume 08.04
ASTM D2684-95(2005)
Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary
Products
volume 08.01
ASTM D2685-95(2003)
Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography
volume 10.03
ASTM D2686-00
Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape
volume 10.02
Strona 92
ASTM D2687-95(2001)
Standard Practices for Sampling Particulate Ion-Exchange Materials
volume 11.02
Water (II)
ASTM D2688-05
Standard Test Methods for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Methods)
volume 11.01
Water (I)
ASTM D2689-88(1999)
Standard Practices for Testing Alkyd Resins
volume 06.03
Vehicles
ASTM D2690-98
Standard Test Method for Isophthalic Acid in Alkyd and Polyester Resins
volume 06.03
Vehicles
ASTM D2692-04
Standard Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns
volume 07.01
ASTM D2693-02
Standard Specification for Ethylene Glycol
volume 06.04
ASTM D2694-05
Standard Specification for Diethylene Glycol
volume 06.04
ASTM D2697-03
Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
volume 06.01
ASTM D2698-05
Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed
Centrifuging
volume 06.01
ASTM D2699-04a
Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
volume 05.05
ASTM D2700-04a
Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
volume 05.05
ASTM D2702-05
Standard Practice for Rubber Chemicals-Determination of Infrared Absorption Characteristics
volume 09.01
ASTM D2709-96(2001)e1
Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
volume 05.01
ASTM D2710-99(2004)e1
Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration
volume 05.01
ASTM D2711-01a
Standard Test Method for Demulsibility Characteristics of Lubricating Oils
volume 05.01
ASTM D2712-91(2003)e1
Standard Test Method for Hydrocarbon Traces in Propylene Concentrates By Gas Chromatography
volume 05.01
ASTM D2713-91(2001)
Standard Test Method for Dryness of Propane (Valve Freeze Method)
volume 05.01
ASTM D2714-94(2003)
Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing
Machine
volume 05.01
ASTM D2715-92(2002)
Standard Test Method for Volatilization Rates of Lubricants in Vacuum
volume 05.01
ASTM D2717-95(2005)
Standard Test Method for Thermal Conductivity of Liquids
volume 05.01
ASTM D2718-00e1
Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
volume 04.10
Wood
ASTM D2719-89(2001)e1
Standard Test Methods for Structural Panels in Shear Through-the-Thickness
volume 04.10
Wood
ASTM D2720-94(2000)
Standard Practice for Calculation of Commercial Weight and Yield of Scoured Wool, Top, and Noil for
Various Commercial Compositions
volume 07.01
ASTM D2724-03
Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics
volume 07.01
ASTM D2726-05a
Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous
Mixtures
volume 04.03
Systems
ASTM D2728-98(2003)
Standard Practice for Paving Uses and Application Temperatures for Road Tars
volume 04.03
Systems
ASTM D2729-03
Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
volume 08.04
ASTM D2731-01
Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
volume 07.01
ASTM D2732-03
Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
volume 08.01
ASTM D2734-94(2003)
Standard Test Methods for Void Content of Reinforced Plastics
volume 08.01
ASTM D2737-03
Standard Specification for Polyethylene (PE) Plastic Tubing
volume 08.04
ASTM D2739-97(2004)
Standard Test Method for Volume Resistivity of Conductive Adhesives
volume 15.06
Adhesives
ASTM D2741-95(2005)
Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation
volume 08.01
ASTM D2743-68(2004)
Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography
volume 06.02
ASTM D2745-00
Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
volume 06.01
ASTM D2746-97(2002)e1
Standard Test Method for Staining Tendency of Asphalt (Stain Index)
volume 04.04
ASTM D2749-02
Standard Symbols for Dimensions of Plastic Pipe Fittings
volume 08.04
ASTM D2751-05
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
volume 08.04
ASTM D2752-88(2002)e1
Standard Test Methods for Air Permeability of Asbestos Fibers
volume 04.05
ASTM D2754-99(2004)
Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape
volume 10.02
ASTM D2756-02
Standard Test Method for Weight Loss of Electrical Insulating Varnishes
volume 10.02
ASTM D2758-94(2003)
Standard Test Method for Engine Coolants by Engine Dynamometer
volume 15.05
ASTM D2759-00(2005)
Standard Practice for Sampling Gas from a Transformer Under Positive Pressure
volume 10.03
ASTM D2764-99(2004)e1
Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
volume 05.01
ASTM D2765-01(2006)
Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
volume 08.01
ASTM D2766-95(2005)
Standard Test Method for Specific Heat of Liquids and Solids
volume 05.01
ASTM D2768-95(2001)
Standard Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable
volume 10.02
ASTM D2770-01
Standard Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for
Wire and Cable
volume 10.02
ASTM D2774-04
Standard Practice for Underground Installation of Thermoplastic Pressure Piping
volume 08.04
ASTM D2777-03
Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on
Water
volume 11.01
Water (I)
Strona 93
ASTM D2779-92(2002)
Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids
volume 05.01
ASTM D2780-92(2002)e1
Standard Test Method for Solubility of Fixed Gases in Liquids
volume 05.01
ASTM D2782-02
Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken
Method)
volume 05.01
ASTM D2783-03
Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball
Method)
volume 05.01
ASTM D2784-98(2003)e1
Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
volume 05.01
ASTM D2786-91(2001)e1
Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing
Voltage Mass Spectrometry
volume 05.01
ASTM D2789-95(2005)
Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry
volume 05.01
ASTM D2791-93(2001)
Standard Test Methods for Continuous Determination of Sodium in Water
volume 11.01
Water (I)
ASTM D2792-69(2004)
Standard Test Method for Solvent and Fuel Resistance of Traffic Paint
volume 06.02
ASTM D2793-99(2005)
Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates
volume 06.02
ASTM D2794-93(2004)
Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
volume 06.01
ASTM D2797-04
Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
volume 05.06
ASTM D2798-05
Standard Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal
volume 05.06
ASTM D2799-05a
Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
volume 05.06
ASTM D2800-92(1998)
Standard Test Method for Preparation of Methyl Esters From Oils for Determination of Fatty Acid
Composition by Gas-Liquid Chromatography
volume 06.03
Vehicles
ASTM D2802-03
Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable
volume 10.02
ASTM D2803-03
Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
volume 06.01
ASTM D2804-02
Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
volume 06.04
ASTM D2805-96a(2003)
Standard Test Method for Hiding Power of Paints by Reflectometry
volume 06.01
ASTM D2807-93(2003)
Standard Test Method for Chromic Oxide in Leather (Perchloric Acid Oxidation)
volume 15.04
ASTM D2809-04e2
Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps
With Engine Coolants
volume 15.05
ASTM D2810-01
Standard Test Method for pH of Leather
volume 15.04
ASTM D2812-95(2002)
Standard Test Method for Non-Lint Content of Cotton
volume 07.01
ASTM D2813-03
Standard Practice for Sampling Leather for Physical and Chemical Tests
volume 15.04
ASTM D2816-05
Standard Test Method for Cashmere Coarse-Hair Content in Cashmere
volume 07.01
ASTM D2817-05
Standard Specification for Maximum Cashmere Coarse-Hair Content in Cashmere
volume 07.01
ASTM D2821-00(2005)e1
Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire
Apparatus
volume 15.04
ASTM D2822-05
Standard Specification for Asphalt Roof Cement
volume 04.04
ASTM D2823-05
Standard Specification for Asphalt Roof Coatings
volume 04.04
ASTM D2824-04
Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, and
Fibered without Asbestos
volume 04.04
ASTM D2825-02
Standard Terminology Relating to Polishes and Related Materials
volume 15.04
ASTM D2827-04
Standard Specification for Styrene Monomer
volume 06.04
ASTM D2829-04
Standard Practice for Sampling and Analysis of Built-Up Roofs
volume 04.04
ASTM D2832-92(2005)
Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
volume 06.01
ASTM D2834-95(2002)
Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based
Floor Polishes, and Polymer-Emulsion Floor Polishes
volume 15.04
ASTM D2835-89(2003)
Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
volume 04.03
Systems
ASTM D2837-04
Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure
Design Basis for Thermoplastic Pipe Products
volume 08.04
ASTM D2838-02
Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
volume 08.01
ASTM D2839-05
Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
volume 08.01
ASTM D2842-01
Standard Test Method for Water Absorption of Rigid Cellular Plastics
volume 08.01
ASTM D2843-99(2004)e1
Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
volume 08.01
ASTM D2844-01e1
Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
volume 04.08
ASTM D2845-05
Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of
Rock
volume 04.08
ASTM D2846/D2846M-99e1
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution
Systems
volume 08.04
ASTM D2847-99(2004)
Standard Practice for Testing Engine Coolants in Car and Light Truck Service
volume 15.05
ASTM D2850-03a
Standard Test Method for Unconsolidated-Undrained Triaxial CompressionTest on Cohesive Soils
volume 04.08
ASTM D2851-98(2004)
Standard Specification for Liquid Optical Adhesive
volume 15.06
Adhesives
ASTM D2852-95(2002)
Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
volume 08.04
ASTM D2854-96(2004)
Standard Test Method for Apparent Density of Activated Carbon
volume 15.01
Ceramics
ASTM D2855-96(2002)
Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
volume 08.04
ASTM D2856-94(1998)
Standard Test Method for Open-Cell Content of Rigid Cellular Plastics by the Air Pycnometer
volume 08.01
Strona 94
ASTM D2857-95(2001)
Standard Practice for Dilute Solution Viscosity of Polymers
volume 08.01
ASTM D2859-06
Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials
volume 04.07
Dimension Stone
ASTM D2860/D2860M-04
Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Angle and Constant
Stress
volume 15.09
ASTM D2861-87(2004)
Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
volume 10.02
ASTM D2862-97(2004)
Standard Test Method for Particle Size Distribution of Granular Activated Carbon
volume 15.01
Ceramics
ASTM D2863-06a
Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like
Combustion of Plastics (Oxygen Index)
volume 08.01
ASTM D2864-02
Standard Terminology Relating to Electrical Insulating Liquids and Gases
volume 10.03
ASTM D2865-01
Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
volume 10.02
ASTM D2866-94(2004)
Standard Test Method for Total Ash Content of Activated Carbon
volume 15.01
Ceramics
ASTM D2867-04
Standard Test Methods for Moisture in Activated Carbon
volume 15.01
Ceramics
ASTM D2868-96(2001)
Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather
volume 15.04
ASTM D2872-04
Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
volume 04.03
Systems
ASTM D2875-00(2005)
Standard Test Method for Insoluble Ash of Vegetable-Tanned Leather
volume 15.04
ASTM D2876-00(2005)
Standard Test Method for Water-Soluble Matter of Vegetable-Tanned Leather
volume 15.04
ASTM D2878-95(2005)
Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
volume 05.01
ASTM D2879-97(2002)e1
Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature
of Liquids by Isoteniscope
volume 05.01
ASTM D2880-03
Standard Specification for Gas Turbine Fuel Oils
volume 05.01
ASTM D2881-03
Standard Classification for Metal Working Fluids and Related Materials
volume 05.01
ASTM D2883-95(2005)
Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials
volume 05.01
ASTM D2884-93(2002)
Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method
volume 05.01
ASTM D2885-03
Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct
Comparison Technique
volume 05.05
ASTM D2887-04a
Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
volume 05.01
ASTM D2889-95(2005)
Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
volume 05.01
ASTM D2890-92(2003)
Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
volume 05.01
ASTM D2892-05
Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
volume 05.01
ASTM D2893-04
Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
volume 05.01
ASTM D2896-05
Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
volume 05.01
ASTM D2898-94(2004)
Standard Test Methods for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
volume 04.10
Wood
ASTM D2899-03
Standard Practice for Establishing Allowable Stresses for Round Timber Piles
volume 04.10
Wood
ASTM D2901-99
Standard Test Method for Cement Content of Freshly Mixed Soil-Cement
volume 04.08
ASTM D2902-00
Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation
volume 10.02
ASTM D2903-03
Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
volume 10.02
ASTM D2904-97(2002)
Standard Practice for Interlaboratory Testing of a Textile Test Method that Produces Normally Distributed
Data
volume 07.01
ASTM D2905-97(2002)
Standard Practice for Statements on Number of Specimens for Textiles
volume 07.01
ASTM D2906-97(2002)
Standard Practice for Statements on Precision and Bias for Textiles
volume 07.01
ASTM D2908-91(2005)
Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas
Chromatography
volume 11.02
Water (II)
ASTM D2911-94(2005)
Standard Specification for Dimensions and Tolerances for Plastic Bottles
volume 08.01
ASTM D2913-96(2001)e1
Standard Test Method for Mercaptan Content of the Atmosphere
volume 11.03
ASTM D2914-01
Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
volume 11.03
ASTM D2915-03
Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber
volume 04.10
Wood
ASTM D2916-04
Standard Specification for Isophorone
volume 06.04
ASTM D2917-02
Standard Specification for Methyl Isoamyl Ketone
volume 06.04
ASTM D2918-99(2005)
Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
volume 15.06
Adhesives
ASTM D2919-01e1
Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
volume 15.06
Adhesives
ASTM D2921-98(2005)
Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood
Products
volume 06.02
ASTM D2922-05
Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
volume 04.08
ASTM D2923-01
Standard Test Method for Rigidity of Polyolefin Film and Sheeting
volume 08.01
ASTM D2924-01
Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced
Thermosetting-Resin) Pipe
volume 08.04
ASTM D2925-01
Standard Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin)
Pipe Under Full Bore Flow
volume 08.04
Strona 95
ASTM D2929-89(2000)
Standard Test Method for Sulfur Content of Cellulosic Materials by X-ray Fluorescence
volume 06.03
Vehicles
ASTM D2930-03
Standard Test Method for Maleic Acid in Maleic Anhydride by Potentiometric Titration
volume 06.04
ASTM D2936-95(2004)e1
Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
volume 04.08
ASTM D2937-04
Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
volume 04.08
ASTM D2939-03
Standard Test Methods for Emulsified Bitumens Used as Protective Coatings
volume 04.04
ASTM D2940-03
Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports
volume 04.03
Systems
ASTM D2941-00(2004)
Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
volume 15.04
ASTM D2942-02
Standard Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods)
volume 15.05
ASTM D2943-02
Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
volume 15.05
ASTM D2944-71(1998)
Standard Test Method of Sampling Processed Peat Materials
volume 04.08
ASTM D2945-90(2003)e1
Standard Test Method for Gas Content of Insulating Oils
volume 10.03
ASTM D2946-01(2005)
Standard Termninology for Asbestos and Asbestos-Cement Products
volume 04.05
ASTM D2947-88(2002)e1
Standard Test Method for Screen Analysis of Asbestos Fibers
volume 04.05
ASTM D2949-01ae1
Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and
Vent Pipe and Fittings
volume 08.04
ASTM D2950-05
Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
volume 04.03
Systems
ASTM D2951-00
Standard Test Method for Resistance of Types III and IV Polyethylene Plastics to Thermal Stress-Cracking
volume 08.01
ASTM D2959-95(2003)
Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
volume 15.04
ASTM D2960-05
Standard Test Method of Controlled Laundering Test Using Naturally Soiled Fabrics and Household
Appliances
volume 15.04
ASTM D2961-02e1
Standard Test Method for Single-Stage Total Moisture Less than 15% in Coal Reduced to 2.36-mm (No. 8
Sieve) Topsize
volume 05.06
ASTM D2962-97(2002)
Standard Test Method for Calculating Volume-Temperature Correction For Coal-Tar Pitches
volume 05.01
ASTM D2967-02a
Standard Test Method for Corner Coverage of Powder Coatings
volume 06.02
ASTM D2968-95(2001)
Standard Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection
volume 07.01
ASTM D2969-04
Standard Test Methods for Steel Tire Cords
volume 07.01
ASTM D2970/D2970M-04
Standard Test Method for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass
Filaments
volume 07.01
ASTM D2972-03
Standard Test Methods for Arsenic in Water
volume 11.01
Water (I)
ASTM D2973-71(2004)
Standard Test Method for Total Nitrogen in Peat Materials
volume 04.08
ASTM D2974-00
Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
volume 04.08
ASTM D2976-71(2004)
Standard Test Method for pH of Peat Materials
volume 04.08
ASTM D2977-03
Standard Test Method for Particle Size Range of Peat Materials for Horticultural Purposes
volume 04.08
ASTM D2978-03
Standard Test Method for Volume of Processed Peat Materials
volume 04.08
ASTM D2979-01
Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine
volume 15.06
Adhesives
ASTM D2980-04
Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated
Peat Materials
volume 04.08
ASTM D2981-94(2003)
Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
volume 05.01
ASTM D2982-98(2004)
Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
volume 05.01
ASTM D2983-04a
Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
volume 05.01
ASTM D2985-92(2002)e1
Standard Test Method for Color of Asbestos
volume 04.05
ASTM D2987-88(2002)e1
Standard Test Method for Moisture Content of Asbestos Fiber
volume 04.05
ASTM D2988-96(2005)
Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
volume 15.05
ASTM D2989-01(2006)
Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures
volume 15.05
ASTM D2990-01
Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
volume 08.01
ASTM D2992-01
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-FiberReinforced Thermosetting-Resin) Pipe and Fittings
volume 08.04
ASTM D2995-99(2004)
Standard Practice for Estimating Application Rate of Bituminous Distributors
volume 04.03
Systems
ASTM D2996-01
Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
volume 08.04
ASTM D2997-01
Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
volume 08.04
ASTM D3002-02
Standard Guide for Evaluation of Coatings Applied to Plastics
volume 06.02
ASTM D3003-01
Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal
Substrates
volume 06.02
Strona 96
ASTM D3004-02
Standard Specification for Extruded Crosslinked and Thermoplastic Semi-Conducting, Conductor and
Insulation Shielding Materials
volume 10.02
ASTM D3005-99(2004)
Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical
Insulating Tape
volume 10.02
ASTM D3006-99(2004)
Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
volume 10.02
ASTM D3012-04
Standard Test Method for Thermal-Oxidative Stability of Propylene Plastics Using a Specimen Rotator
Within an Oven
volume 08.01
ASTM D3013-99(2004)e1
Standard Specification for Epoxy Molding Compounds
volume 08.01
ASTM D3014-04a
Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular
Plastics in a Vertical Position
volume 08.01
ASTM D3016-97(2003)
Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships
volume 08.01
ASTM D3017-05
Standard Test Method for Water Content of Soil and Rock in Place by Nuclear Methods (Shallow Depth)
volume 04.08
ASTM D3018-03
Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
volume 04.04
ASTM D3019-94(2000)e1
Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non Fibered, Asbestos Fibered, and
Non Abestos Fibered
volume 04.04
ASTM D3021-01
Standard Specification for Phthalocyanine Green Pigments
volume 06.03
Vehicles
ASTM D3022-84(2005)
Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill
volume 06.01
ASTM D3023-98(2003)
Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains
and Reagents
volume 06.02
ASTM D3025-01
Standard Practice for Standardizing Cotton Fiber Test Results by Use of Calibration Cotton Standards
volume 07.01
ASTM D3030-95(2006)
Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins
volume 08.01
ASTM D3032-04
Standard Test Methods for Hookup Wire Insulation
volume 10.02
ASTM D3034-04a
Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
volume 08.04
ASTM D3035-03a
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
volume 08.04
ASTM D3038-93(2004)
Standard Test Method for Drop Shatter Test for Coke
volume 05.06
D3039/D3039MASTM
00(2006)
Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
volume 15.03
Composite Materials
ASTM D3042-03
Standard Test Method for Insoluble Residue in Carbonate Aggregates
volume 04.03
Systems
ASTM D3043-00e1
Standard Test Methods for Testing Structural Panels in Flexure
volume 04.10
Wood
ASTM D3044-94(2000)
Standard Test Method for Shear Modulus of Wood-Based Structural Panels
volume 04.10
Wood
ASTM D3045-92(2003)
Standard Practice for Heat Aging of Plastics Without Load
volume 08.01
ASTM D3048-89(2003)
Standard Test Method of Assay for Alkaline Protease
volume 15.04
ASTM D3049-89(2003)
Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
volume 15.04
ASTM D3050-05e1
Standard Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent
Ranking)
volume 15.04
ASTM D3052-87(2003)
Standard Practice for Rating Water-Emulsion Floor Polishes
volume 15.04
ASTM D3053-05
Standard Terminology Relating to Carbon Black
volume 09.01
ASTM D3054-98
Standard Test Methods for Analysis of Cyclohexane by Gas Chromatography
volume 06.04
ASTM D3056-05
Standard Test Method for Gel Time of Solventless Varnishes
volume 10.02
ASTM D3060-94(2005)
Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
volume 15.09
ASTM D3061-97(2003)
Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans
volume 15.09
ASTM D3064-97(2003)
Terminology Relating to Aerosol Products
volume 15.09
ASTM D3065-01(2006)
Standard Test Methods for Flammability of Aerosol Products
volume 15.09
ASTM D3069-94(2005)
Standard Test Method for Delivery Rate of Aerosol Products
volume 15.09
ASTM D3070-00(2005)
Standard Test Method of Rapid Pressure Determination of Pressurized Products
volume 15.09
ASTM D3076-00(2005)
Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
volume 15.09
ASTM D3078-02
Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
volume 15.09
ASTM D3079-94(2003)
Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products
volume 15.09
ASTM D3080-04
Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
volume 04.08
ASTM D3082-03
Standard Test Method for Boron In Water
volume 11.01
Water (I)
ASTM D3084-05
Standard Practice for Alpha-Particle Spectrometry of Water
volume 11.02
Water (II)
ASTM D3087-91(2004)
Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
volume 11.02
Water (II)
ASTM D3089-97(2003)
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
volume 15.09
ASTM D3090-72(2003)
Standard Practice for Storage Testing of Aerosol Products
volume 15.09
ASTM D3091-72(2003)
Standard Practice for Safe Filling of Low-Pressure Pressurized Products
volume 15.09
ASTM D3094-00(2005)
Standard Test Method for Seepage Rate of Aerosol Products
volume 15.09
ASTM D3103-99
Standard Test Method for Thermal Insulation Quality of Packages
volume 15.09
ASTM D3104-99(2005)
Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)
volume 05.01
ASTM D3105-99
Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
volume 04.04
Strona 97
ASTM D3106-01
Standard Test Method for Permanent Deformation of Elastomeric Yarns
volume 07.01
ASTM D3107-03
Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
volume 07.01
ASTM D3108-01
Standard Test Method for Coefficient of Friction, Yarn to Solid Material
volume 07.01
ASTM D3111-99(2004)e1
Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
volume 15.06
Adhesives
ASTM D3115-95(2005)
Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
volume 05.01
ASTM D3117-03
Standard Test Method for Wax Appearance Point of Distillate Fuels
volume 05.01
ASTM D3120-03a
Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative
Microcoulometry
volume 05.01
ASTM D3121-06
Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
volume 15.06
Adhesives
ASTM D3122-95(2002)
Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings
volume 08.04
ASTM D3123-98(2004)
Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds
volume 08.01
ASTM D3124-98(2003)
Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
volume 08.01
ASTM D3125-97(2001)
Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and
Acrylic Acid
volume 06.04
ASTM D3128-02
Standard Specification for 2-Methoxyethanol
volume 06.04
ASTM D3130-03
Standard Specification for n-Propyl Acetate (96 % Grade)
volume 06.04
ASTM D3131-02
Standard Specification for Isopropyl Acetate (99% Grade)
volume 06.04
ASTM D3133-01(2005)
Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by
Infrared Spectrophotometry
volume 06.02
ASTM D3134-97(2003)
Standard Practice for Establishing Color and Gloss Tolerances
volume 06.01
ASTM D3135-87(2005)
Standard Specification for Performance of Bonded, Fused, and Laminated Apparel Fabrics
volume 07.01
ASTM D3136-04
Standard Terminology Relating to Care Labeling for Apparel, Textile, Home Furnishing, and Leather
Products
volume 07.01
ASTM D3137-81(2001)
Standard Test Method for Rubber Property—Hydrolytic Stability
volume 09.01
ASTM D3138-04
Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene
(ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
volume 08.04
ASTM D3139-98(2005)
Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
volume 08.04
ASTM D3141-04
Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
volume 04.03
Systems
ASTM D3142-05
Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer
Method
volume 04.03
Systems
ASTM D3143-98
Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
volume 04.03
Systems
ASTM D3144-00
Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical
Insulation
volume 10.02
ASTM D3145-03
Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
volume 10.02
ASTM D3147-06
Standard Test Method for Testing Stop-Leak Additives for Engine Coolants
volume 15.05
ASTM D3149-00
Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
volume 10.02
ASTM D3150-00
Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for
Electrical Insulation
volume 10.02
ASTM D3151-88(1998)
Standard Test Method for Thermal Failure of Solid Electrical Insulating Materials Under Electric Stress
volume 10.02
ASTM D3152-72(2000)
Standard Test Method for Capillary-Moisture Relationships for Fine-Textured Soils by Pressure-Membrane
Apparatus
volume 04.08
ASTM D3153-87(2002)
Standard Test Method for Recoatability of Water-Emulsion Floor Polishes
volume 15.04
ASTM D3154-00(2006)
Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)
volume 11.03
ASTM D3155-98
Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures
volume 04.08
ASTM D3156-96(2005)
Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and
Stabilizers)
volume 09.01
ASTM D3157-05
Standard Test Method for Rubber from Natural Sources—Color
volume 09.01
ASTM D3159-06
Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials
volume 08.01
ASTM D3160-03
Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (alpha-Methylstyrene)
volume 06.04
ASTM D3161-05
Standard Test Method for Wind-Resistance of Asphalt Shingles (Fan-Induced Method)
volume 04.04
ASTM D3162-94(2005)
Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive
Infrared Spectrometry)
volume 11.03
ASTM D3163-01
Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in
Shear by Tension Loading
volume 15.06
Adhesives
ASTM D3164-03
Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in
volume 15.06
Adhesives
ASTM D3164M-03
Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in
volume 15.06
Adhesives
ASTM D3165-00
Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint
Laminated Assemblies
volume 15.06
Adhesives
ASTM D3166-99(2005)
Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
volume 15.06
Adhesives
ASTM D3167-03a(2004)
Standard Test Method for Floating Roller Peel Resistance of Adhesives
volume 15.06
Adhesives
ASTM D3168-85(2005)
Standard Practice for Qualitative Identification of Polymers in Emulsion Paints
volume 06.01
ASTM D3169-89(2001)
Standard Specification for Refined Sunflower Oil
volume 06.03
Vehicles
ASTM D3170-03
Standard Test Method for Chipping Resistance of Coatings
volume 06.02
Strona 98
ASTM D3171-06
Standard Test Methods for Constituent Content of Composite Materials
volume 15.03
Composite Materials
ASTM D3172-89(2002)
Standard Practice for Proximate Analysis of Coal and Coke
volume 05.06
ASTM D3173-03
Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
volume 05.06
ASTM D3174-04
Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
volume 05.06
ASTM D3175-02
Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
volume 05.06
ASTM D3176-89(2002)
Standard Practice for Ultimate Analysis of Coal and Coke
volume 05.06
ASTM D3177-02
Standard Test Methods for Total Sulfur in the Analysis Sample of Coal and Coke
volume 05.06
ASTM D3178-89(2002)
Standard Test Methods for Carbon and Hydrogen in the Analysis Sample of Coal and Coke
volume 05.06
ASTM D3179-02e1
Standard Test Methods for Nitrogen in the Analysis Sample of Coal and Coke
volume 05.06
ASTM D3180-89(2002)
Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
volume 05.06
ASTM D3181-95(2002)
Standard Guide for Conducting Wear Tests on Textiles
volume 07.01
ASTM D3182-89(2001)e1
Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and
Preparing Standard Vulcanized Sheets
volume 09.01
ASTM D3183-02
Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
volume 09.01
ASTM D3184-89(2001)
Standard Test Methods for Rubber-Evaluation of NR (Natural Rubber)
volume 09.01
ASTM D3185-06
Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With
Oil
volume 09.01
ASTM D3186-97(2002)
Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon
Black or Carbon Black and Oil
volume 09.01
ASTM D3187-06
Standard Test Methods for Rubber-Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
volume 09.01
ASTM D3188-06
Standard Test Methods for Rubber-Evaluation of IIR (Isobutene-Isoprene Rubber)
volume 09.01
ASTM D3189-06
Standard Test Methods for Rubber-Evaluation of Solution BR (Polybutadiene Rubber)
volume 09.01
ASTM D3190-06
Standard Test Method for Rubber-Evaluation of Chloroprene Rubber (CR)
volume 09.01
ASTM D3191-02
Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene-Rubber)-Recipe and Evaluation
Procedures
volume 09.01
ASTM D3192-05
Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)
volume 09.01
ASTM D3193-96(2003)
Standard Specification for Ethylbenzene
volume 06.04
ASTM D3194-04
Standard Test Method for Rubber From Natural Sources-Plasticity Retention Index (PRI)
volume 09.01
ASTM D3195-90(2004)
Standard Practice for Rotameter Calibration
volume 11.03
ASTM D3198-97(2002)
Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures
volume 15.09
ASTM D3200-74(2005)
Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber
Construction Poles
volume 04.10
Wood
ASTM D3201-94(2003)
Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Base Products
volume 04.10
Wood
ASTM D3202-94(2004)e1
Standard Practice for Preparation of Bituminous Mixture Beam Specimens by Means of the California
Kneading Compactor
volume 04.03
Systems
ASTM D3203-05
Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
volume 04.03
Systems
ASTM D3206-92(2002)
Standard Test Method for Soil Resistance of Floor Polishes
volume 15.04
ASTM D3207-92(2002)
Standard Test Method for Detergent Resistance of Floor Polish Films
volume 15.04
ASTM D3208-00(2005)
Standard Specification for Manifold Papers for Permanent Records
volume 15.09
ASTM D3209-93(2004)
Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes
volume 15.04
ASTM D3210-95(2002)
Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
volume 15.04
ASTM D3212-96a(2003)e1
Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
volume 08.04
ASTM D3213-03
Standard Practices for Handling, Storing, and Preparing Soft Undisturbed Marine Soil
volume 04.08
ASTM D3217-01a
Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
volume 07.01
ASTM D3218-01
Standard Specification for Polyolefin Monofilaments
volume 07.01
ASTM D3222-05
Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating
Materials
volume 08.02
Plastics (II): D3222 - D5083
ASTM D3223-02
Standard Test Method for Total Mercury in Water
volume 11.01
Water (I)
ASTM D3224-02
Standard Test Method for Water Solubility of Auxiliary Solvent for Wood Preserving Solutions
volume 04.10
Wood
ASTM D3225-73(2002)e1
Standard Specification for Low-Boiling Hydrocarbon Solvent for Oil-Borne Preservatives
volume 04.10
Wood
ASTM D3227-04a
Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate
Fuels (Potentiometric Method)
volume 05.01
ASTM D3228-05
Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
volume 05.01
ASTM D3230-05a
Standard Test Method for Salts in Crude Oil (Electrometric Method)
volume 05.01
ASTM D3231-02
Standard Test Method for Phosphorus in Gasoline
volume 05.02
Petroleum Products and Lubricants (II): D3231 D5302
ASTM D3233-93(2003)
Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and
Vee Block Methods)
volume 05.02
ASTM D3235-05
Standard Test Method for Solvent Extractables in Petroleum Waxes
volume 05.02
ASTM D3236-88(2004)
Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
volume 05.02
ASTM D3237-02
Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
volume 05.02
Strona 99
ASTM D3238-95(2005)
Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils
by the n-d-M Method
volume 05.02
ASTM D3239-91(2001)
Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage
Mass Spectrometry
volume 05.02
ASTM D3240-05
Standard Test Method for Undissolved Water In Aviation Turbine Fuels
volume 05.02
ASTM D3241-05b
Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
volume 05.02
ASTM D3242-05
Standard Test Method for Acidity in Aviation Turbine Fuel
volume 05.02
ASTM D3244-97(2002)
Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
volume 05.02
ASTM D3245-03
Standard Test Method for Pumpability of Industrial Fuel Oils
volume 05.02
ASTM D3246-05
Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
volume 05.02
ASTM D3249-95(2005)
Standard Practice for General Ambient Air Analyzer Procedures
volume 11.03
ASTM D3251-04
Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over
Film-Insulated Magnet Wire
volume 10.02
ASTM D3256-86(2004)
Standard Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments
volume 06.03
Vehicles
ASTM D3257-01
Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography
volume 06.04
ASTM D3258-04
Standard Test Method for Porosity of White or Near White Paint Films by Staining
volume 06.02
ASTM D3259-95(2001)e1
Standard Practice for Infrared Determination of the Temperature of Applied Coatings on Wood Products
During the Curing Cycle
volume 06.02
ASTM D3260-01(2005)
Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded
Aluminum Products
volume 06.02
ASTM D3261-03
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic
Pipe and Tubing
volume 08.04
ASTM D3262-04
Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
volume 08.04
ASTM D3263-03
Standard Test Methods for Corrosivity of Solvent Systems for Removing Water-Formed Deposits
volume 11.02
Water (II)
ASTM D3265-05
Standard Test Method for Carbon Black—Tint Strength
volume 09.01
ASTM D3266-91(2005)
Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride
in the Atmosphere (Double Paper Tape Sampler Method)
volume 11.03
ASTM D3267-91(2005)
Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in
the Atmosphere (Filter and Impinger Method)
volume 11.03
ASTM D3268-91(2005)
Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the
Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
volume 11.03
ASTM D3269-96(2001)e1
Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Manual
Procedures)
volume 11.03
ASTM D3270-00(2006)
Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues
(Semiautomated Method)
volume 11.03
ASTM D3271-87(2001)
Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent
Analysis
volume 06.01
ASTM D3272-76(2003)
Standard Practice for Vacuum Distillation of Solvents From Solvent-Reducible Paints For Analysis
volume 06.01
ASTM D3273-00
Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an
Environmental Chamber
volume 06.01
ASTM D3274-95(2002)
Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or
Algal) Growth or Soil and Dirt Accumulation
volume 06.01
ASTM D3275-05
Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
volume 08.02
ASTM D3276-00
Standard Guide for Painting Inspectors (Metal Substrates)
volume 06.02
ASTM D3277-95(2001)e1
Standard Test Methods for Moisture Content of Oil-Impregnated Cellulosic Insulation
volume 10.03
ASTM D3278-96(2004)e1
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
volume 06.01
ASTM D3279-97(2001)
Standard Test Method for n-Heptane Insolubles
volume 04.03
Systems
ASTM D3280-85(2004)
Standard Test Methods for Analysis of White Zinc Pigments
volume 06.03
Vehicles
ASTM D3282-93(2004)e1
Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
volume 04.08
ASTM D3283-98(2004)
Standard Specification for Air as an Electrical Insulating Material
volume 10.03
ASTM D3284-05
Standard Test Method for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable
Meters
volume 10.03
ASTM D3285-93(2005)
Standard Test Method for Water Absorptiveness of Nonbibulous Paper and Paperboard (Cobb Test)
volume 15.09
ASTM D3288-03
Standard Test Methods for Magnet-Wire Enamels
volume 10.02
ASTM D3289-03
Standard Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)
volume 04.03
Systems
ASTM D3290-00(2005)
Standard Specification for Bond and Ledger Papers for Permanent Records
volume 15.09
ASTM D3291-97(2003)
Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
volume 08.02
ASTM D3294-03
Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes
volume 08.02
ASTM D3295-06
Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
volume 08.02
ASTM D3296-03
Standard Specification for FEP-Fluorocarbon Tube
volume 08.02
ASTM D3299-00
Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant
Tanks
volume 08.04
ASTM D3300-00
Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Under Impulse
Conditions
volume 10.03
Strona 100
ASTM D3301-00(2005)
Standard Specification for File Folders for Storage of Permanent Records
volume 15.09
ASTM D3302-05e1
Standard Test Method for Total Moisture in Coal
volume 05.06
ASTM D3305-94(2005)
Standard Practice for Sampling Small Gas Volume in a Transformer
volume 10.03
ASTM D3306-05
Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
volume 15.05
ASTM D3307-06
Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials
volume 08.02
ASTM D3308-06
Standard Specification for PTFE Resin Skived Tape
volume 08.02
ASTM D3309-96a(2002)
Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems
volume 08.04
ASTM D3310-00
Standard Test Method for Determining Corrosivity of Adhesive Materials
volume 15.06
Adhesives
ASTM D3311-02e1
Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
volume 08.04
ASTM D3312-04
Standard Test Method for Percent Reactive Monomer in Solventless Varnishes
volume 10.02
ASTM D3313-05a
Standard Test Method for Carbon Black—Individual Pellet Hardness
volume 09.01
ASTM D3314-02
Standard Test Method for Rubber-Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene
Rubber) and Styrene-Reinforced Latices
volume 09.01
ASTM D3316-06
Standard Test Method for Stability of Perchloroethylene with Copper
volume 15.05
ASTM D3319-00
Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel
volume 04.03
Systems
ASTM D3320-00(2004)e1
Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type)
volume 04.04
ASTM D3321-94(2002)
Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of
Aqueous Engine Coolants
volume 15.05
ASTM D3322-82(2005)
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
volume 06.02
ASTM D3325-90(2002)e1
Standard Practice for Preservation of Waterborne Oil Samples
volume 11.02
Water (II)
ASTM D3326-90(2002)
Standard Practice for Preparation of Samples for Identification of Waterborne Oils
volume 11.02
Water (II)
ASTM D3328-00
Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
volume 11.02
Water (II)
ASTM D3329-03
Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
volume 06.04
ASTM D3330/D3330M-04
Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
volume 15.09
ASTM D3332-99(2004)
Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
volume 15.09
ASTM D3333-01
Standard Practice for Sampling Manufactured Staple Fibers, Sliver, or Tow for Testing
volume 07.01
ASTM D3335-85a(2005)
Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption
Spectroscopy
volume 06.01
ASTM D3336-05
Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
volume 05.02
ASTM D3337-91(2002)
Standard Test Method for Determining Life and Torque of Lubricating Greases in Small Ball Bearings
volume 01.08
ASTM D3338-05
volume 05.02
ASTM D3339-04
Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
volume 05.02
ASTM D3340-98(2003)
Standard Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer
volume 05.02
ASTM D3341-05
Standard Test Method for Lead in Gasoline-Iodine Monochloride Method
volume 05.02
ASTM D3342-90(2000)e1
Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water
volume 05.02
ASTM D3343-05
Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
volume 05.02
ASTM D3344-90(2005)
Standard Test Method for Total Wax Content of Corrugated Paperboard
volume 05.02
ASTM D3345-74(1999)
Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to
Termites
volume 04.10
Wood
ASTM D3346-03
Standard Test Methods for Rubber Property—Processability of Emulsion SBR (Styrene-Butadiene Rubber)
With the Mooney Viscometer (Delta Mooney)
volume 09.01
ASTM D3348-98(2003)e1
Standard Test Method for Rapid Field Test for Trace Lead In Unleaded Gasoline (Colorimetric Method)
volume 05.02
ASTM D3349-99
Standard Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black
volume 10.02
ASTM D3350-05
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
volume 08.02
ASTM D3352-03e1
Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
volume 11.02
Water (II)
ASTM D3353-04
Standard Test Methods for Fibrous-Insulated Magnet Wire
volume 10.02
ASTM D3354-04
Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
volume 08.02
ASTM D3359-02
Standard Test Methods for Measuring Adhesion by Tape Test
volume 06.01
ASTM D3361-01
Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
volume 06.01
ASTM D3362-05
Standard Test Method for Purity of Acrylate Esters by Gas Chromatography
volume 06.04
ASTM D3363-05
Standard Test Method for Film Hardness by Pencil Test
volume 06.01
ASTM D3364-99(2004)
Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
volume 08.02
ASTM D3366-95(2003)e1
Standard Test Method for Color of Maleic Anhydride and Phthalic Anhydride in the Molten State and After
Heating (Platinum-Cobalt Scale)
volume 06.04
ASTM D3367-98(2004)
Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force
volume 08.02
ASTM D3368-04
Standard Specification for FEP-Fluorocarbon Resin Sheet and Film
volume 08.02
ASTM D3369-01
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film
volume 08.02
Strona 101
ASTM D3370-95a(2003)e1
Standard Practices for Sampling Water from Closed Conduits
volume 11.01
Water (I)
ASTM D3372-02
Standard Test Method for Molybdenum in Water
volume 11.01
Water (I)
ASTM D3373-03
Standard Test Method for Vanadium in Water
volume 11.01
Water (I)
ASTM D3374-04
Standard Specification for Vinyl-Coated Glass Yarns
volume 07.01
ASTM D3375-95a(2001)
Standard Test Method for Column Capacity of Particulate Mixed Bed Ion Exchange Materials
volume 11.02
Water (II)
ASTM D3376-88(2005)
Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
volume 10.02
ASTM D3377-04
Standard Test Method for Weight Loss of Solventless Varnishes
volume 10.02
ASTM D3380-90(2003)
Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of PolymerBased Microwave Circuit Substrates
volume 10.02
ASTM D3381-05
Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
volume 04.03
Systems
ASTM D3382-95(2001)e1
Standard Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial
Discharges (Corona) Using Bridge Techniques
volume 10.02
ASTM D3385-03
Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
volume 04.08
ASTM D3387-83(2003)
Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S.
Corps of Engineers Gyratory Testing Machine (GTM)
volume 04.03
Systems
ASTM D3389-05
Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform, Double-Head Abrader)
volume 09.02
ASTM D3393-91(2005)
Standard Specification for Coated Fabrics-Waterproofness
volume 09.02
ASTM D3394-94(2005)
Standard Test Methods for Sampling and Testing Electrical Insulating Board
volume 10.02
ASTM D3395-99
Standard Test Methods for Rubber Deterioration-Dynamic Ozone Cracking in a Chamber
volume 09.01
ASTM D3398-00
Standard Test Method for Index of Aggregate Particle Shape and Texture
volume 04.03
Systems
ASTM D3401-97(2006)
Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
volume 15.05
ASTM D3402-93(2001)
Standard Test Method for Tumbler Test for Coke
volume 05.06
ASTM D3403-97(2002)
Standard Test Methods for Rubber-Evaluation of IR (Isoprene Rubber)
volume 09.01
ASTM D3404-91(2004)
Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
volume 04.08
ASTM D3406-95(2000)
Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete
Pavements
volume 04.03
Systems
ASTM D3409-93(2002)e1
Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces
volume 04.04
ASTM D3410/D3410M-03
Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported
Gage Section by Shear Loading
volume 15.03
Composite Materials
ASTM D3412-01
Standard Test Method for Coefficient of Friction, Yarn to Yarn
volume 07.01
ASTM D3414-98(2004)
Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
volume 11.02
Water (II)
ASTM D3415-98(2004)
Standard Practice for Identificaiton of Waterborne Oils
volume 11.02
Water (II)
ASTM D3418-03
Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers
by Differential Scanning Calorimetry
volume 08.02
ASTM D3419-00(2006)
Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
volume 08.02
ASTM D3420-95(2002)
Standard Test Method for Pendulum Impact Resistance of Plastic Film
volume 08.02
ASTM D3423-84(2003)
Standard Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)
volume 04.04
ASTM D3424-01
Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
volume 06.02
ASTM D3426-97(2004)
Materials Using Impulse Waves
volume 10.02
ASTM D3427-03
Standard Test Method for Air Release Properties of Petroleum Oils
volume 05.02
ASTM D3429-93(2002)e1
Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
volume 05.02
ASTM D3430-95(2002)
Standard Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes
volume 15.04
ASTM D3433-99(2005)
Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
volume 15.06
Adhesives
ASTM D3434-00
Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use
Wood Adhesives
volume 15.06
Adhesives
ASTM D3437-03
Standard Practice for Sampling and Handling Liquid Cyclic Products
volume 06.04
ASTM D3438-99
Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
volume 06.04
ASTM D3440-01
Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes
volume 15.04
ASTM D3441-05
Standard Test Method for Mechanical Cone Penetration Tests of Soil
volume 04.08
ASTM D3443-00(2005)
Standard Test Method for Chloride in Trichlorotrifluoroethane
volume 15.05
ASTM D3444-00(2005)
Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
volume 15.05
ASTM D3448-85(2005)
Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
volume 15.05
ASTM D3450-00(2005)
Standard Test Method for Washability Properties of Interior Architectural Coatings
volume 06.02
ASTM D3451-01
Standard Guide for Testing Coating Powders and Powder Coatings
volume 06.02
ASTM D3452-93(2002)
Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography
volume 09.01
ASTM D3453-01
Standard Specification for Flexible Cellular Materials-Urethane for Furniture and Automotive Cushioning,
Bedding, and Similar Applications
volume 08.02
ASTM D3454-05
Standard Test Method for Radium-226 in Water
volume 11.02
Water (II)
Strona 102
ASTM D3455-02
Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum
Origin
volume 10.03
ASTM D3456-86(2002)
Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to
Microbiological Attack
volume 06.01
ASTM D3458-00(2005)
Standard Specification for Copies from Office Copying Machines for Permanent Records
volume 15.09
ASTM D3459-98
Standard Test Method for Humid-Dry Cycling for Coatings on Wood and Wood Products
volume 06.02
ASTM D3460-98
Standard Specification for White Watermarked and Unwatermarked Bond, Mimeo, Spirit Duplicator,
Reprographic, and Laser Printer Cut-Sized Office Papers
volume 15.09
ASTM D3461-97(2002)
Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)
volume 05.02
ASTM D3462-05
Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
volume 04.04
ASTM D3464-96(2001)
Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
volume 11.03
ASTM D3465-00
Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
volume 08.02
ASTM D3466-76(1998)
Standard Test Method for Ignition Temperature of Granular Activated Carbon
volume 15.01
Ceramics
ASTM D3467-04
Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon
volume 15.01
Ceramics
ASTM D3468-99
Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and
Waterproofing
volume 04.04
ASTM D3469-97(2002)
Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style
Child-Resistant Closures
volume 15.09
ASTM D3470-97(2002)
Standard Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures
volume 15.09
ASTM D3472-97(2002)
Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures
volume 15.09
ASTM D3474-90(2002)
Standard Practice for The Calibration and Use of Torque Meters Used in Packaging Applications
volume 15.09
ASTM D3475-05
Standard Classification of Child-Resistant Packages
volume 15.09
Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
volume 15.03
Composite Materials
ASTM D3481-06
Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two
Simultaneous Dissimilar Motions
volume 15.09
ASTM D3482-90(2000)
Standard Test Method for Determining Electrolytic Corrosion of Copper by Adhesives
volume 15.06
Adhesives
ASTM D3483-05
Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
volume 11.02
Water (II)
ASTM D3484-97(2002)
Standard Test Methods for Rubber-Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)
volume 09.01
ASTM D3485-02
Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire
and Cable
volume 10.02
ASTM D3487-00
Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
volume 10.03
ASTM D3489-96(2000)
Standard Test Methods for Rubber--Microcellular Urethane
volume 08.02
ASTM D3492-03
Standard Specification for Rubber Contraceptives (Male Condoms)
volume 09.02
ASTM D3493-04a
Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
volume 09.01
ASTM D3495-00(2006)
Standard Test Method for Hexane Extraction of Leather
volume 15.04
ASTM D3496-99(2005)
Standard Practice for Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing
volume 04.03
Systems
ASTM D3497-79(2003)
Standard Test Method for Dynamic Modulus of Asphalt Mixtures
volume 04.03
Systems
ASTM D3498-03
Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems
volume 15.06
Adhesives
ASTM D3499-94(2005)
Standard Test Method for Toughness of Wood-Based Structural Panels
volume 04.10
Wood
ASTM D3500-90(2003)
Standard Test Methods for Structural Panels in Tension
volume 04.10
Wood
ASTM D3501-05a
Standard Test Methods for Wood-Based Structural Panels in Compression
volume 04.10
Wood
ASTM D3504-96(2003)e1
Standard Specification for Maleic Anhydride
volume 06.04
ASTM D3505-96(2006)
Standard Test Method for Density or Relative Density of Pure Liquid Chemicals
volume 06.04
ASTM D3507-97(2000)
Standard Test Methods for Penetration of Preservatives in Wood and for Differentiating Between Heartwood
and Sapwood
volume 04.10
Wood
ASTM D3511-05
Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush
Pilling Tester
volume 07.01
ASTM D3512-05
Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics:
Random Tumble Pilling Tester
volume 07.01
ASTM D3513-02
Standard Test Method for Overlength Fiber Content of Man-Made Staple Fiber
volume 07.01
ASTM D3514-05
Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics:
Elastomeric Pad
volume 07.01
ASTM D3515-01
Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
volume 04.03
Systems
ASTM D3516-89(2000)
Standard Test Methods for Ashing Cellulose
volume 06.03
Vehicles
ASTM D3517-04
Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
volume 08.04
D3518/D3518MASTM
94(2001)
Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test
of a ± 45oLaminate
volume 15.03
Composite Materials
ASTM D3519-88(2002)
Standard Test Method for Foam in Aqueous Media (Blender Test)
volume 05.02
ASTM D3520-04
Standard Test Method for Quenching Time of Heat-Treating Fluids (Magnetic Quenchometer Method)
volume 05.02
ASTM D3521-86(2002)
Standard Test Method for Surface Wax Coating On Corrugated Board
volume 05.02
ASTM
D3479/D3479M96(2002)e1
Strona 103
ASTM D3522-86(2002)e1
Standard Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board
Facing
volume 05.02
ASTM D3523-92(2002)
Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
volume 05.02
ASTM D3524-04
Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
volume 05.02
ASTM D3525-04
Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
volume 05.02
ASTM D3527-02
Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
volume 05.02
ASTM D3528-96(2002)
Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
volume 15.06
Adhesives
D3529/D3529MASTM
97(2003)e1
Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
volume 15.03
Composite Materials
Standard Test Method for Volatiles Content of Composite Material Prepreg
volume 15.03
Composite Materials
ASTM D3531-99(2004)
Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
volume 15.03
Composite Materials
ASTM D3532-99(2004)
Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
volume 15.03
Composite Materials
ASTM D3533-05
Standard Test Method for Rubber-Nitrogen Content
volume 09.01
ASTM D3535-00
Standard Test Method for Resistance to Deformation Under Static Loading for Structural Wood Laminating
Adhesives Used Under Exterior (Wet Use) Exposure Conditions
volume 15.06
Adhesives
ASTM D3539-87(2004)
Standard Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer
volume 06.01
ASTM D3540-90(2001)
Standard Specification for Primary Amyl Acetate, Synthetic (98% Grade)
volume 06.04
ASTM D3541-05
Standard Specification for 2-Ethylhexyl Acrylate
volume 06.04
ASTM D3542-92(2003)
Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
volume 04.03
Systems
ASTM D3543-93(2002)
Standard Test Method for Metal Glide Adhesion
volume 15.04
ASTM D3545-02
Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
volume 06.04
ASTM D3546-05
Standard Test Method for Formic Acid in Glacial Acetic Acid
volume 06.04
ASTM D3547-05
Standard Specification for n-Butyl Acrylate
volume 06.04
ASTM D3548-04
Standard Specification for Ethyl Acrylate
volume 06.04
ASTM D3549-03
Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
volume 04.03
Systems
ASTM D3550-01
Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
volume 04.08
ASTM D3551-02
Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using a Mechanical Mixer
volume 04.08
ASTM D3552-96(2002)
Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
volume 15.03
Composite Materials
ASTM D3554-01
Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for
Wire and Cable, 75oC Operation
volume 10.02
ASTM D3555-01
Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable,
90oC Operation
volume 10.02
ASTM D3556-85(2001)
Standard Test Method for Deposition on Glassware During Mechanical Dishwashing
volume 15.04
ASTM D3557-02
Standard Test Methods for Cadmium in Water
volume 11.01
Water (I)
ASTM D3558-03
Standard Test Methods for Cobalt in Water
volume 11.01
Water (I)
ASTM D3559-03
Standard Test Methods for Lead in Water
volume 11.01
Water (I)
ASTM D3561-02
Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by
Atomic Absorption Spectrophotometry
volume 11.02
Water (II)
ASTM D3562-99(2005)
Standard Performance Specification for Woven Drycleanable Coat Fabrics
volume 07.01
ASTM D3564-95(2002)
Standard Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring
volume 15.04
ASTM D3565-89(2001)
Standard Test Method for Tableware Pattern Removal by Mechanical Dishwasher Detergents
volume 15.04
ASTM D3566-03
Standard Practice for Rubber—Determination of Bromine in the Presence of Chlorine by Oxygen
Combustion
volume 09.01
ASTM D3567-97(2002)
Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin)
Pipe and Fittings
volume 08.04
ASTM D3568-03
Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including
Mixtures With Oil
volume 09.01
ASTM D3569-95(2000)
Standard Specification for Joint Sealant, Hot-Applied, Elastomeric, Jet-Fuel-Resistant-Type for Portland
Cement Concrete Pavements
volume 04.03
Systems
ASTM D3574-05
Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
volume 08.02
ASTM D3575-00e1
Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
volume 08.02
ASTM D3576-04
Standard Test Method for Cell Size of Rigid Cellular Plastics
volume 08.02
ASTM D3577-06
Standard Specification for Rubber Surgical Gloves
volume 09.02
ASTM D3578-05
Standard Specification for Rubber Examination Gloves
volume 09.02
ASTM D3579-77(2004)
Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type
volume 09.02
ASTM D3580-95(2004)
Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
volume 15.09
ASTM D3581-02
Standard Specification for Joint Sealant, Hot-Applied, Jet-Fuel-Resistant Type, for Portland Cement
Concrete and Tar-Concrete Pavements
volume 04.03
Systems
ASTM D3585-98(2002)
Standard Specification for ASTM Reference Fluid for Coolant Tests
volume 15.05
ASTM D3588-98(2003)
Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
volume 05.06
ASTM
D3530/D3530M97(2003)
Strona 104
ASTM D3590-02
Standard Test Methods for Total Kjeldahl Nitrogen in Water
volume 11.02
Water (II)
ASTM D3591-97(2003)
Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in
Formulated Compounds
volume 08.02
ASTM D3594-93(2000)
Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
volume 08.02
ASTM D3595-02
Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
volume 08.02
ASTM D3596-92(2001)
Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC)
Resins
volume 08.02
ASTM D3597-02
Standard Specification for Woven Upholstery Fabrics-Plain, Tufted, or Flocked
volume 07.01
ASTM D3598-89(2003)
Standard Test Method for Citrate in Synthetic Detergents
volume 15.04
ASTM D3601-88(2002)e1
Standard Test Method for Foam In Aqueous Media (Bottle Test)
volume 05.02
ASTM D3603-93(2002)
Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water
(Horizontal Disk Method)
volume 05.02
ASTM D3605-00(2005)
Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission
Spectroscopy
volume 05.02
ASTM D3606-04a
Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline
by Gas Chromatography
volume 05.02
ASTM D3607-97(2002)e1
Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping
volume 05.02
ASTM D3608-95(2005)
Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman
Reaction
volume 11.03
ASTM D3609-00(2005)
Standard Practice for Calibration Techniques Using Permeation Tubes
volume 11.03
ASTM D3610-00(2004)
Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric
Titration Method
volume 05.05
ASTM D3611-89(2003)
Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes
volume 15.09
ASTM D3612-02
Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
volume 10.03
ASTM D3613-98
Standard Practice for Sampling Insulating Liquids for Gas Analysis and Determination of Water Content
volume 10.03
ASTM D3614-97(2002)e1
Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions
volume 11.03
ASTM D3616-95(2004)e1
Standard Test Method for Rubber, Raw-Determination of Gel, Swelling Index, and Dilute Solution Viscosity
volume 09.01
ASTM D3617-02
Standard Practice for Sampling and Analysis of New Built-Up Roof Membranes
volume 04.04
ASTM D3618-05
Standard Test Method for Detection of Lead in Paint and Dried Paint Films
volume 06.01
ASTM D3620-04
Standard Specification for Glacial Acetic Acid
volume 06.04
ASTM D3622-05
Standard Specification for 1-Propanol (n-Propyl Alcohol)
volume 06.04
ASTM D3623-78a(2004)
Standard Test Method for Testing Antifouling Panels in Shallow Submergence
volume 06.02
ASTM D3624-85a(2005)
Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
volume 06.01
ASTM D3625-96(2005)
Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
volume 04.03
Systems
ASTM D3628-01
Standard Practice for Selection and Use of Emulsified Asphalts
volume 04.03
Systems
ASTM D3631-99(2004)
Standard Test Methods for Measuring Surface Atmospheric Pressure
volume 11.03
ASTM D3632-98(2004)
Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
volume 15.06
Adhesives
ASTM D3633-98
Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
volume 04.03
Systems
ASTM D3634-99(2005)e1
Standard Test Method for Trace Chloride Ion in Engine Coolants
volume 15.05
ASTM D3635-01(2005)
Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption
Spectrophotometry
volume 10.03
ASTM D3636-00
Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
volume 10.02
ASTM D3638-93(1998)
Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
volume 10.02
ASTM D3639-92(2002)e2
Standard Test Method for Classification of Asbestos by Quebec Standard Test
volume 04.05
ASTM D3641-02
Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
volume 08.02
ASTM D3642-98(2004)
Standard Test Method for Softening Point of Certain Alkali-Soluble Resins
volume 15.04
ASTM D3643-98(2004)
Standard Test Method for Acid Number of Certain Alkali-Soluble Resins
volume 15.04
ASTM D3644-06
Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins
volume 15.04
ASTM D3645-03
Standard Test Methods for Beryllium in Water
volume 11.01
Water (I)
ASTM D3647-03
Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition
volume 08.02
ASTM D3648-04
Standard Practices for the Measurement of Radioactivity
volume 11.02
Water (II)
ASTM D3649-98a
Standard Test Method for High-Resolution Gamma-Ray Spectrometry of Water
volume 11.02
Water (II)
ASTM D3650-93(2006)
Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis
volume 11.02
Water (II)
ASTM D3651-02
Standard Test Method for Barium in Brackish Water, Seawater, and Brines
volume 11.02
Water (II)
D3652/D3652MASTM
01(2006)
Standard Test Method for Thickness of Pressure-Sensitive Tapes
volume 15.09
ASTM D3654/D3654M-06
Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
volume 15.09
ASTM D3655-02
Standard Performance Specification for Men's and Women's Sliver Knitted Overcoat and Jacket Fabrics
volume 07.01
ASTM D3656-04
Standard Specification for Insect Screening and Louver Cloth Woven fromVinyl-Coated Glass Yarns
volume 07.01
Strona 105
ASTM D3657-03
Standard Specification for Zipper Dimensions
volume 07.01
ASTM D3658-01
Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal
Adhesive Joints
volume 15.06
Adhesives
ASTM D3663-03
Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
volume 05.05
ASTM D3664-04
Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment
volume 10.02
ASTM D3665-06
Standard Practice for Random Sampling of Construction Materials
volume 04.03
Systems
ASTM D3666-05a
Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving
Materials
volume 04.03
Systems
ASTM D3667-05
Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
volume 09.02
ASTM D3670-91(2001)
Standard Guide for Determination of Precision and Bias of Methods of Committee D22
volume 11.03
ASTM D3673-89(2003)
Standard Test Methods for Chemical Analysis of Alpha Olefin Sulfonates
volume 15.04
ASTM D3675-05
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy
Source
volume 08.02
ASTM D3676-01
Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
volume 08.02
ASTM D3677-00(2004)
Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
volume 09.01
ASTM D3678-97(2001)
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
volume 08.04
ASTM D3679-05
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
volume 08.04
ASTM D3681-01e1
Standard Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced ThermosettingResin) Pipe in a Deflected Condition
volume 08.04
ASTM D3682-01(2006)
Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization
Processes
volume 05.06
ASTM D3683-04
Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption
volume 05.06
ASTM D3684-01(2006)
Standard Test Method for Total Mercury in Coal by the Oxygen BombCombustion/Atomic Absorption Method
volume 05.06
D3685/D3685MASTM
98(2005)
Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
volume 11.03
ASTM D3686-95(2001)e1
Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal
Tube Adsorption Method)
volume 11.03
ASTM D3687-01
Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube
Adsorption Method
volume 11.03
ASTM D3690-02
Standard Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics-Indoor
volume 07.01
ASTM D3691-02
Standard Performance Specification for Woven, Lace, and Knit Household Curtain and Drapery Fabrics
volume 07.01
ASTM D3693-02
Standard Specification for Labeled Length per Holder of Sewing Thread
volume 07.01
ASTM D3694-96(2004)
Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents
volume 11.02
Water (II)
ASTM D3695-95(2001)
Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
volume 11.02
Water (II)
ASTM D3697-02
Standard Test Method for Antimony in Water
volume 11.01
Water (I)
ASTM D3698-04
Standard Practice for Solvent Vapor Degreasing Operations
volume 15.05
ASTM D3699-05
Standard Specification for Kerosine
volume 05.02
ASTM D3700-01
Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
volume 05.02
ASTM D3701-01
Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic
Resonance Spectrometry
volume 05.02
ASTM D3702-94(2004)
Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing
Contact Using a Thrust Washer Testing Machine
volume 05.02
ASTM D3703-99(2004)
Standard Test Method for Peroxide Number of Aviation Turbine Fuels
volume 05.02
ASTM D3704-96(2001)
Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on
Ring Test Machine in Oscillating Motion
volume 05.02
ASTM D3705-86(2003)e1
Standard Test Method for Misting Properties of Lubricating Fluids
volume 05.02
ASTM D3707-89(2005)e1
Standard Test Method for Storage Stability of Water-in-Oil Emulsions by the Oven Test Method
volume 05.02
ASTM D3708-88(2005)
Standard Test Method for Weight of Wax Applied During Curtain Coating Operation
volume 05.02
ASTM D3709-89(2005)e1
Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling
Conditions
volume 05.02
ASTM D3710-95(2004)
Standard Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas
Chromatography
volume 05.02
ASTM D3711-95(2005)
Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors
volume 05.02
ASTM D3712-05
Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
volume 05.02
Standard Practice for Quality Assurance of Pressure-Sensitive Tapes
volume 15.09
ASTM D3716-99(2006)
Standard Test Methods for Use of Emulsion Polymers in Floor Polishes
volume 15.04
ASTM D3717-85a(2005)
Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
volume 06.01
ASTM D3718-85a(2005)
Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
volume 06.01
ASTM D3719-00
Standard Test Method for Quantifying Dirt Collection on Coated Exterior Panels
volume 06.02
ASTM D3720-90(2005)
Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-ray Diffraction
volume 06.03
Vehicles
ASTM
D3715/D3715M98(2004)
Strona 106
ASTM D3721-05
Standard Specification for Synthetic Red Iron Oxide Pigment
volume 06.03
Vehicles
ASTM D3722-05
Standard Specification for Natural Red and Brown Iron Oxide Pigments
volume 06.03
Vehicles
ASTM D3723-05
Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
volume 06.01
ASTM D3724-01
Standard Specification for Synthetic Brown Iron Oxide Pigment
volume 06.03
Vehicles
ASTM D3725-78(1998)
Standard Test Method for Semiquantitative Determination of Fish Oil in Drying Oils and Drying Oil Fatty
Acids by Gas-Liquid Chromatography
volume 06.03
Vehicles
ASTM D3728-03
Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade)
volume 06.04
ASTM D3730-03
Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
volume 06.02
ASTM D3731-87(2004)
Standard Practices for Measurement of Chlorophyll Content of Algae in Surface Waters
volume 11.06
Biotechnology
ASTM D3732-82(2005)
Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
volume 06.02
ASTM D3733-93(1998)
Standard Test Method for Silicon Content of Silicone Polymers and Silicone-Modified Alkyds by Atomic
Absorption
volume 06.03
Vehicles
ASTM D3734-05
Standard Specification for High-Flash Aromatic Naphthas
volume 06.04
ASTM D3735-02
Standard Specification for VM&P Naphthas
volume 06.04
ASTM D3737-05
Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
volume 04.10
Wood
ASTM D3738-84(2004)
Standard Specification for Rubber-Coated Cloth Hospital Sheeting
volume 09.02
ASTM D3739-05
Standard Practice for Calculation and Adjustment of the Langelier Saturation Index for Reverse Osmosis
volume 11.02
Water (II)
ASTM D3740-04a
Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil
and Rock as Used in Engineering Design and Construction
volume 04.08
ASTM D3741-00(2004)
Standard Test Methods for Appearance of Admixtures Containing Halogenated Organic Solvents
volume 15.05
ASTM D3744-03
Standard Test Method for Aggregate Durability Index
volume 04.03
Systems
ASTM D3745-95(2000)e1
Standard Practice for Installation of Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed
Type)
volume 04.04
ASTM D3746-85(2002)
Standard Test Method for Impact Resistance of Bituminous Roofing Systems
volume 04.04
ASTM D3747-79(2000)e1
Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation
volume 04.04
ASTM D3748-03
Standard Practice for Evaluating High-Density Rigid Cellular Plastics
volume 08.02
ASTM D3749-95(2002)
Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas
Chromatographic Headspace Technique
volume 08.02
ASTM D3751-94(2002)
Standard Practice for Evaluation of Furniture Polish
volume 15.04
ASTM D3752-98(2002)e1
Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix
volume 04.05
ASTM D3753-05
Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells
volume 08.04
ASTM D3754-04
Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial
Pressure Pipe
volume 08.04
ASTM D3755-97(2004)
Materials Under Direct-Voltage Stress
volume 10.02
ASTM D3756-97(2004)
Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric
Materials Using Diverging Fields
volume 10.02
ASTM D3757-89(2005)e1
Standard Guide for Preparing Specifications for Solvent-based Floor Polishes
volume 15.04
ASTM D3758-95(2003)
Standard Practice for Evaluation of Spray-Buff Products on Test Floors
volume 15.04
ASTM D3759/D3759M-05
Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
volume 15.09
ASTM D3760-02e1
Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
volume 06.04
ASTM D3761-96(2002)
Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode
Method
volume 05.06
ASTM D3762-03
Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)
volume 15.06
Adhesives
ASTM D3763-02
Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement
Sensors
volume 08.02
ASTM D3764-01
Standard Practice for Validation of Process Stream Analyzer Systems
volume 05.02
ASTM D3765-04
Standard Test Method for Carbon Black—CTAB (Cetyltrimethylammonium Bromide) Surface Area
volume 09.01
ASTM D3766-86(2002)
Standard Terminology Relating to Catalysts and Catalysis
volume 05.05
ASTM D3767-03
Standard Practice for Rubber-Measurement of Dimensions
volume 09.01
ASTM D3768-06
Standard Test Method for Microcellular Urethanes-Flexural Recovery
volume 08.02
ASTM D3769-05
Standard Test Method for Microcellular Urethanes--High Temperature Sag
volume 08.02
ASTM D3771-03
Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
volume 09.02
ASTM D3772-01(2005)
Standard Specification for Natural Rubber Finger Cots
volume 09.02
ASTM D3773-90(2002)
Standard Test Methods for Length of Woven Fabric
volume 07.01
ASTM D3774-96(2004)
Standard Test Methods for Width of Textile Fabric
volume 07.01
ASTM D3775-03a
Standard Test Method for Fabric Count of Woven Fabric
volume 07.01
Strona 107
ASTM D3776-96(2002)
Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
volume 07.01
ASTM D3777-97(2002)
Standard Practice for Writing Specifications for Textiles
volume 07.01
ASTM D3780-02
Standard Performance Specification for Men's and Boys' Woven Dress Suit Fabrics and Woven Sportswear
Jacket, Slack, and Trouser Fabrics
volume 07.01
ASTM D3782-02
Standard Performance Specification for Men's and Boys' Knitted Dress Suit Fabrics and Knitted Sportswear
Jacket, Slack, and Trouser Fabrics
volume 07.01
ASTM D3783-02
Standard Performance Specification for Woven Flat Lining Fabrics for Men's and Boys' Apparel
volume 07.01
ASTM D3785-02
Standard Performance Specification for Woven Necktie and Scarf Fabrics
volume 07.01
ASTM D3786-01
Standard Test Method for Hydraulic Bursting Strength of Textile Fabrics-Diaphragm Bursting Strength Tester
Method
volume 07.01
ASTM D3787-01
Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
volume 07.01
ASTM D3790-79(2001)
Standard Test Method for Volatile Matter (Moisture) of Leather by Oven Drying
volume 15.04
ASTM D3791-04
Standard Practice for Evaluating the Effects of Heat on Asphalts
volume 04.04
ASTM D3792-05
Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
volume 06.01
ASTM D3793-04
Standard Test Method for Low-Temperature Coalescence of Latex Paint Films
volume 06.02
ASTM D3794-00
Standard Guide for Testing Coil Coatings
volume 06.02
ASTM D3795-00a(2006)
Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials
by Torque Rheometer
volume 08.02
ASTM D3796-90(2004)
Standard Practice for Calibration of Type S Pitot Tubes
volume 11.03
ASTM D3797-05
Standard Test Method for Analysis of o-Xylene by Gas Chromatography
volume 06.04
ASTM D3798-03
Standard Test Method for Analysis of p-Xylene by Gas Chromatography
volume 06.04
ASTM D3800-99(2004)
Standard Test Method for Density of High-Modulus Fibers
volume 15.03
Composite Materials
ASTM D3801-00
Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical
Position
volume 08.02
ASTM D3802-79(2005)
Standard Test Method for Ball-Pan Hardness of Activated Carbon
volume 15.01
Ceramics
ASTM D3803-91(2004)
Standard Test Method for Nuclear-Grade Activated Carbon
volume 15.01
Ceramics
ASTM D3804-02
Standard Test Method for Iron in Paint Driers by EDTA Method
volume 06.01
ASTM D3805-97(2003)e1
Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings
volume 04.04
ASTM D3806-98(2004)
Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
volume 06.01
ASTM D3807-98(2004)
Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading
(Engineering Plastics-to-Engineering Plastics)
volume 15.06
Adhesives
ASTM D3808-01
Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot
Adhesion
volume 15.06
Adhesives
ASTM D3809-01
Standard Method for Testing Synthetic Dielectric Fluids For Capacitors
volume 10.03
ASTM D3810-97(2002)
Standard Test Method for Minimum Application Torque of Type IA Child-Resistant Closures
volume 15.09
ASTM
D3811/D3811M96(2006)
Standard Test Method for Unwind Force of Pressure-Sensitive Tapes
volume 15.09
ASTM
D3813/D3813M98(2003)
Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
volume 15.09
ASTM D3814-06
Standard Guide for Locating Combustion Test Methods for Polymeric Materials
volume 08.02
ASTM D3815/D3815M-05
Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc
Exposure Apparatus
volume 15.09
Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
volume 15.09
ASTM D3822-01
Standard Test Method for Tensile Properties of Single Textile Fibers
volume 07.01
ASTM D3823-01
Standard Practice for Determining Ticket Numbers for Sewing Threads
volume 07.01
ASTM D3824-95(2005)
Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace
Atmosphere by the Chemiluminescent Method
volume 11.03
ASTM D3825-90(2005)
Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique
volume 05.02
ASTM D3826-98(2002)
Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene
Using a Tensile Test
volume 08.02
ASTM D3827-92(2002)
Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids
volume 05.02
ASTM D3828-05
Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
volume 05.02
ASTM D3829-02
Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
volume 05.02
ASTM D3831-01
Standard Test Method for Manganese In Gasoline By Atomic Absorption Spectroscopy
volume 05.02
ASTM D3832-79(2001)
Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
volume 09.02
Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
volume 15.09
ASTM D3835-02
Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary
Rheometer
volume 08.02
ASTM D3836-94(1999)
Standard Practice for Evaluation of Automotive Polish
volume 15.04
ASTM D3837-95(2002)
Standard Practice for Preparing a Solution of Alkali-Soluble Resins
volume 15.04
ASTM D3838-05
Standard Test Method for pH of Activated Carbon
volume 15.01
Ceramics
ASTM
ASTM
D3816/D3816M96(2003)
D3833/D3833M96(2006)
Strona 108
ASTM D3839-02e1
Standard Guide for Underground Installation of "Fiberglass" (Glass-FiberReinforced Thermosetting-Resin)
Pipe
volume 08.04
ASTM D3840-01(2005)
Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for
Nonpressure Applications
volume 08.04
ASTM D3841-97(2001)
Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
volume 08.04
ASTM D3843-00
Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities
volume 06.02
ASTM D3844-02
Standard Guide for Labeling Halogenated Hydrocarbon Solvent Containers
volume 15.05
ASTM D3845-05
Standard Specification for Glacial Methacrylic Acid
volume 06.04
ASTM D3846-02
Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
volume 08.02
ASTM D3847-01
Standard Practice for Rubber-Directions for Achieving Subnormal Test Temperatures
volume 09.01
ASTM D3848-03
Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With
Carbon Black
volume 09.01
ASTM D3849-04
Standard Test Method for Carbon Black-Morphological Characterization of Carbon Black Using Electron
Microscopy
volume 09.01
ASTM D3850-94(2000)
Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By
Thermogravimetric Method (TGA)
volume 10.02
ASTM D3851-97(2003)e1
Standard Specification for Urethane Microcellular Shoe Soling Materials
volume 08.02
ASTM D3852-99
Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid
volume 06.04
ASTM D3853-03e1
Standard Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in
Compounding
volume 09.01
ASTM D3854-90(2005)
Standard Test Method for Rubber Thread-Resistance to Dry Heat
volume 09.02
ASTM D3855-84(2004)
Standard Test Method for Rubber Thread-Deterioration Due to Standard Washing Solution Treatment
volume 09.02
ASTM D3856-95(2000)
Standard Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water
volume 11.01
Water (I)
ASTM D3858-95(2003)
Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
volume 11.01
Water (I)
ASTM D3859-03
Standard Test Methods for Selenium in Water
volume 11.01
Water (I)
ASTM D3860-98(2003)
Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm
Technique
volume 15.01
Ceramics
ASTM D3861-91(2003)
Standard Test Method for Quantity of Water-Extractable Matter in Membrane Filters
volume 11.02
Water (II)
ASTM D3862-80(2001)
Standard Test Method for Retention Characteristics of 0.2-µm Membrane Filters Used in Routine Filtration
Procedures for the Evaluation of Microbiological Water Quality
volume 11.02
Water (II)
ASTM D3863-87(2003)
Standard Test Method for Retention Characteristics of 0.40 to 0.45-µm Membrane Filters Used in Routine
Filtration Procedures for the Evaluation of Microbiological Water Quality
volume 11.02
Water (II)
ASTM D3864-96(2000)
Standard Guide for Continual On-Line Monitoring Systems for Water Analysis
volume 11.01
Water (I)
ASTM D3865-02
Standard Test Method for Plutonium in Water
volume 11.02
Water (II)
ASTM D3866-02
Standard Test Methods for Silver in Water
volume 11.01
Water (I)
ASTM D3867-04
Standard Test Methods for Nitrite-Nitrate in Water
volume 11.01
Water (I)
ASTM D3868-04
Standard Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines
volume 11.02
Water (II)
ASTM D3869-04
Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines
volume 11.02
Water (II)
ASTM D3871-84(2003)
Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling
volume 11.02
Water (II)
ASTM D3872-05
Standard Test Method for Ferrous Iron in Iron Oxides
volume 06.03
Vehicles
ASTM D3873-01
Standard Test Method for Valency State of the Arsenic Component of Ammoniacal Copper Arsenate
Solutions
volume 04.10
Wood
ASTM D3874-04
Standard Test Method for Ignition of Materials by Hot Wire Sources
volume 10.02
ASTM D3875-03
Standard Test Method for Alkalinity in Brackish Water, Seawater, and Brines
volume 11.02
Water (II)
ASTM D3876-96(2001)
Standard Test Method for Methoxyl and Hydroxypropyl Substitution in Cellulose Ether Products by Gas
Chromatography
volume 06.03
Vehicles
ASTM D3877-02
Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime
Mixtures
volume 04.08
ASTM D3878-04a
Standard Terminology for Composite Materials
volume 15.03
Composite Materials
ASTM D3879-91(2004)e1
Standard Test Method for Sampling Amphibole Asbestos
volume 04.05
ASTM D3880-90(2004)e1
Standard Test Method for Asbestos Strength Units
volume 04.05
ASTM D3882-99(2006)
Standard Test Method for Bow and Skew in Woven and Knitted Fabrics
volume 07.01
ASTM D3883-04
Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
volume 07.01
ASTM D3884-01e1
Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)
volume 07.01
ASTM D3885-04
Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
volume 07.01
ASTM D3886-99(2006)
Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Method)
volume 07.01
ASTM D3887-96(2004)
Standard Specification for Tolerances for Knitted Fabrics
volume 07.01
ASTM D3888-95(2001)
Standard Terminology Relating to Open-End Spinning
volume 07.01
D3889/D3889MASTM
96(2006)
Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature
volume 15.09
ASTM D3890-05
Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser
volume 15.09
ASTM D3891-96(2002)e1
Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
volume 06.01
Strona 109
ASTM D3892-93(2003)
Standard Practice for Packaging/Packing of Plastics
volume 08.02
ASTM D3893-03
Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
volume 06.04
ASTM D3895-04
Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
volume 08.02
ASTM D3896-85(2001)
Standard Practice for Rubber From Synthetic Sources-Sampling
volume 09.01
ASTM D3897-91(2001)
Standard Practice for Calculation of Basicity of Chrome Tanning Liquors
volume 15.04
ASTM D3898-93(2003)
Standard Test Method for Chromic Oxide in Basic Chromium Tanning Liquors
volume 15.04
ASTM D3900-05a
Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers
(EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
volume 09.01
ASTM D3902-90(2004)e1
Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas
volume 09.02
ASTM D3903-03
Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
volume 09.02
ASTM D3906-03
Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type ZeoliteContaining Materials
volume 05.05
ASTM D3907-03
Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
volume 05.05
ASTM D3908-03
Standard Test Method for Hydrogen Chemisorption on Supported Platinum on Alumina Catalysts and
Catalyst Carriers By Volumetric Vacuum Method
volume 05.05
ASTM D3909-97b(2004)e1
Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules
volume 04.04
ASTM D3910-98(2004)
Standard Practices for Design, Testing, and Construction of Slurry Seal
volume 04.03
Systems
ASTM D3911-03
Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated
Design Basis Accident (DBA) Conditions
volume 06.02
ASTM D3912-95(2001)
Standard Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants
volume 06.02
ASTM D3913-03
Standard Test Method for Acidity in Basic Chromium Tanning Liquors
volume 15.04
ASTM D3914-02
Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
volume 08.02
ASTM D3915-99a(2004)
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
Compounds for Plastic Pipe and Fittings Used in Pressure Applications
volume 08.02
ASTM D3916-02
Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
volume 08.02
ASTM D3917-96(2002)e1
Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded
Shapes
volume 08.02
ASTM D3918-96(2003)
Standard Terminology Relating to Reinforced Plastic Pultruded Products
volume 08.02
ASTM D3919-04
Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption
Spectrophotometry
volume 11.01
Water (I)
ASTM D3920-02
Standard Test Method for Strontium in Water
volume 11.01
Water (I)
ASTM D3921-96(2003)e1
Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water
volume 11.02
Water (II)
ASTM D3923-94(2003)e1
Standard Practices for Detecting Leaks in Reverse Osmosis Devices
volume 11.02
Water (II)
ASTM D3924-80(2005)
Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and
Related Materials
volume 06.01
ASTM D3925-02
Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
volume 06.01
ASTM D3926-05
Standard Test Methods for Percent Solids in Titanium Dioxide Slurries
volume 06.03
Vehicles
ASTM D3928-00a(2005)
Standard Test Method for Evaluation of Gloss or Sheen Uniformity
volume 06.02
ASTM D3929-03
Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
volume 15.06
Adhesives
ASTM D3930-93a(2005)
Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
volume 15.06
Adhesives
ASTM D3931-93a(2005)
Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression
Loading
volume 15.06
Adhesives
ASTM D3933-98(2004)
Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid
Anodizing)
volume 15.06
Adhesives
ASTM D3934-90(2001)
Standard Test Method for Flash/No Flash Test—Equilibrium Method by a Closed-Cup Apparatus
volume 06.01
ASTM D3935-02
Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material
volume 08.02
ASTM D3936-05
Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering
volume 07.01
ASTM D3937-01
Standard Test Method for Crimp Frequency of Manufactured Staple Fibers
volume 07.01
ASTM D3938-00
Standard Guide for Determining or Confirming Care Instructions for Apparel and Other Textile Consumer
Products
volume 07.01
ASTM D3939-03(2004)
Standard Test Method for Snagging Resistance of Fabrics (Mace)
volume 07.01
ASTM D3941-90(2001)
Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus
volume 06.01
ASTM D3942-03
Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite
volume 05.05
ASTM D3943-04
Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
volume 05.05
ASTM D3944-88(2005)
Standard Test Method for Solidification Point of Petroleum Wax
volume 05.02
ASTM D3948-05
Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by
Portable Separometer
volume 05.02
ASTM D3949-99(2004)
Standard Specification for Coated Glass Fabrics Used for Electrical Insulation
volume 10.02
ASTM D3950-05
Standard Specification for Strapping, Nonmetallic (and Joining Methods)
volume 15.09
Strona 110
ASTM D3951-98(2004)
Standard Practice for Commercial Packaging
volume 15.09
ASTM D3953-05
Standard Specification for Strapping, Flat Steel and Seals
volume 15.09
ASTM D3954-94(2004)
Standard Test Method for Dropping Point of Waxes
volume 15.04
ASTM D3955-04
Standard Specification for Electrical Insulating Varnishes
volume 10.02
ASTM D3956-93(2003)e1
Standard Specification for Methane Thermophysical Property Tables
volume 05.06
ASTM D3957-06
Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings
volume 04.10
Wood
ASTM D3958-06
Standard Test Methods for Rubber-Evaluation of BIIR and CIIR (Halogenated Isobutene-Isoprene Rubber)
volume 09.01
ASTM D3960-05
Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related
Coatings
volume 06.01
ASTM D3963/D3963M-01
Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
volume 04.03
Systems
ASTM D3964-04
Standard Practice for Selection of Coating Specimens for Appearance Measurements
volume 06.01
ASTM D3965-05
Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
volume 08.02
ASTM D3967-05
Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
volume 04.08
ASTM D3968-97(2002)
Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures
volume 15.09
ASTM D3969-01
Standard Test Method for Zirconium in Paint Driers by EDTA Method
volume 06.01
ASTM D3970-05
Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination
volume 06.01
ASTM D3971-89(2004)
Standard Test Method for Dichloromethane-Soluble Matter in Cellulose
volume 06.03
Vehicles
ASTM D3972-02
Standard Test Method for Isotopic Uranium in Water by Radiochemistry
volume 11.02
Water (II)
ASTM D3973-85(2003)
Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
volume 11.02
Water (II)
ASTM D3974-81(2003)e1
Standard Practices for Extraction of Trace Elements from Sediments
volume 11.02
Water (II)
ASTM D3975-93(2003)
Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods
for Analysis of Sediments
volume 11.02
Water (II)
ASTM D3976-92(2005)
Standard Practice for Preparation of Sediment Samples for Chemical Analysis
volume 11.02
Water (II)
ASTM D3977-97(2002)
Standard Test Methods for Determining Sediment Concentration in Water Samples
volume 11.02
Water (II)
ASTM D3978-04
Practice for Algal Growth Potential Testing with Pseudokirchneriella subcapitata
volume 11.06
Biotechnology
ASTM D3981-03
Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and
Packaging Applications
volume 08.02
ASTM D3982-03
Standard Specification for Contact Molded "Fiberglass" (Glass Fiber Reinforced Thermosetting Resin) Duct
and Hoods
volume 08.04
ASTM D3983-98(2004)
Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the ThickAdherend Tensile-Lap Specimen
volume 15.06
Adhesives
ASTM D3984-93(2003)
Standard Specification for Ethane Thermophysical Property Tables
volume 05.06
ASTM D3985-05
Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a
Coulometric Sensor
volume 15.09
ASTM D3986-02
Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma
Atomic Emission Spectroscopy
volume 11.02
Water (II)
ASTM D3987-85(2004)
Standard Test Method for Shake Extraction of Solid Waste with Water
volume 11.04
Waste Management
ASTM D3988-05
Standard Test Method for Vanadium in Paint Driers by EDTA Method
volume 06.01
ASTM D3989-01
Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method
volume 06.01
ASTM D3990-99(2004)
Standard Terminology Relating to Fabric Defects
volume 07.01
ASTM D3991-94(2000)
Standard Specifications for Fineness of Wool or Mohair and Assignment of Grade
volume 07.01
ASTM D3992-94(2000)
Standard Specification for Wool Top or Mohair Top and Assignment of Grade
volume 07.01
ASTM D3994-02
Standard Performance Specification for Woven Swimwear Fabrics
volume 07.01
ASTM D3995-02
Standard Performance Specification for Men's and Women's Knitted Career Apparel Fabrics: Dress and
Vocational
volume 07.01
ASTM D3996-02
Standard Performance Specification for Knit Swimwear Fabrics
volume 07.01
ASTM D3997-97(2004)
Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
volume 05.06
ASTM D3999-91(2003)
Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the
Cyclic Triaxial Apparatus
volume 04.08
ASTM D4000-04
Standard Classification System for Specifying Plastic Materials
volume 08.02
ASTM D4001-93(2006)
Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light
Scattering
volume 08.02
ASTM D4002-81(2002)
Standard Practice for Evaluation of Buffable Shoe Polish
volume 15.04
ASTM D4003-98(2003)
Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
volume 15.09
ASTM D4004-93(2002)
Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS)
Analysis
volume 09.01
ASTM D4005-92(2005)
Standard Test Method for Plastic-Coated Fabrics—Completeness of Fusion of PVC Dispersion Coatings
volume 09.02
ASTM D4006-81(2005)
Standard Test Method for Water in Crude Oil by Distillation
volume 05.02
ASTM D4007-02
Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory
Procedure)
volume 05.02
ASTM D4008-95(2003)
Standard Test Method for Measuring Anti-Soil Deposition Properties of Laundry Detergents (Not Suitable for
Detergent Ranking)
volume 15.04
ASTM D4009-92(2006)
Standard Guide for Foam Stability of Hand Dishwashing Detergents
volume 15.04
Strona 111
ASTM D4012-81(2002)
Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
volume 11.02
Water (II)
ASTM D4013-98(2005)
Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear
Compactor
volume 04.03
Systems
ASTM D4014-03
Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
volume 04.03
Systems
ASTM D4015-92(2000)
Standard Test Methods for Modulus and Damping of Soils by the Resonant-Column Method
volume 04.08
ASTM D4016-02
Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
volume 04.08
ASTM D4017-02
Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
volume 06.01
ASTM D4018-99(2004)
Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
volume 15.03
Composite Materials
ASTM D4020-05
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
volume 08.02
ASTM D4022-94(2000)e1
Standard Specification for Coal Tar Roof Cement, Asbestos Containing
volume 04.04
ASTM D4024-05
Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin)
Flanges
volume 08.04
ASTM D4025-97(2003)
Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for
Subsurface Injection
volume 11.02
Water (II)
ASTM D4026-87(2002)e1
Standard Test Method for Rubber Latex-Styrene-Butadiene Copolymer-Determination of Residual Styrene
volume 09.01
ASTM D4027-98(2004)
Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
volume 15.06
Adhesives
ASTM D4028-96(2002)
Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn
volume 07.01
ASTM D4029-04
Standard Specification for Finished Woven Glass Fabrics
volume 07.01
ASTM D4030-04
Standard Specification for Glass Fiber Cord and Sewing Thread
volume 07.01
ASTM D4031-01
Standard Test Method for Bulk Properties of Textured Yarns
volume 07.01
ASTM D4032-94(2001)
Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
volume 07.01
ASTM D4035-02
Standard Performance Specification for Knitted Necktie and Scarf Fabrics
volume 07.01
ASTM D4037-02
Standard Performance Specification for Woven, Knitted, or Flocked Bedspread Fabrics
volume 07.01
ASTM D4039-93(2004)
Standard Test Method for Reflection Haze of High-Gloss Surfaces
volume 06.01
ASTM D4040-05
Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod
Viscometer
volume 06.02
ASTM D4041-05
Standard Test Method for Determining Spray Patterns of Manually Operated Pump Dispensers
volume 15.09
ASTM D4042-93(2003)e1
Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils
volume 05.02
ASTM D4043-96(2004)
Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
volume 04.08
ASTM D4044-96(2002)
Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining
Hydraulic Properties of Aquifiers
volume 04.08
ASTM D4045-04
Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
volume 05.02
ASTM D4046-91(2005)
Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
volume 05.02
ASTM D4047-00(2005)
Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate
Method
volume 05.02
ASTM D4048-02
Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
volume 05.02
ASTM D4049-99(2004)
Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
volume 05.02
ASTM D4050-96(2002)
Standard Test Method (Field Procedure) for Withdrawal and Injection Well Tests for Determining Hydraulic
Properties of Aquifer Systems
volume 04.08
ASTM D4051-99(2004)
Standard Practice for Preparation of Low-Pressure Gas Blends
volume 05.02
ASTM D4052-96(2002)e1
Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
volume 05.02
ASTM D4053-04
Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
volume 05.02
ASTM D4054-93(2003)
Standard Practice for Evaluating the Compatibility of Additives with Aviation-Turbine Fuels and Aircraft Fuel
System Materials
volume 05.02
ASTM D4055-04
Standard Test Method for Pentane Insolubles by Membrane Filtration
volume 05.02
ASTM D4056-01
Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
volume 05.02
ASTM D4057-95(2000)
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
volume 05.02
ASTM D4058-96(2001)
Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
volume 05.05
ASTM D4059-00(2005)e1
Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas
Chromatography
volume 10.03
ASTM D4060-01
Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
volume 06.01
ASTM D4061-94(2000)
Standard Test Method for Retroreflectance of Horizontal Coatings
volume 06.01
ASTM D4062-99(2003)
Standard Test Method for Leveling of Paints by Draw-Down Method
volume 06.02
ASTM D4063-99(2004)
Standard Specification for Pressboard for Electrical Insulating Purposes
volume 10.02
ASTM D4064-01
Standard Practice for Preservative Treatment of Utility Poles by the Thermal Process
volume 04.10
Wood
ASTM D4065-01
Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
volume 08.02
ASTM D4066-01a
Standard Classification System for Nylon Injection and Extrusion Materials (PA)
volume 08.02
ASTM D4067-03
Standard Classification System for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding
and Extrusion Materials Using ASTM Methods
volume 08.02
ASTM D4068-01
Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment
Membrane
volume 08.04
Strona 112
ASTM D4069-95(2003)
Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from
Gas Streams
volume 15.01
Ceramics
ASTM D4071-84(2005)
Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems
volume 04.03
Systems
ASTM D4072-98(2003)e1
Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
volume 05.02
ASTM D4073-94(2003)
Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
volume 04.04
ASTM D4074-91(2004)
Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing
Samples
volume 04.04
ASTM D4075-02
Standard Test Methods for Compounding Materials-Flame Atomic Absorption Technique-Determination of
Metals
volume 09.01
ASTM D4077-04
Standard Specification for Cumene (Isopropylbenzene)
volume 06.04
ASTM D4078-02
Standard Specification for Water Emulsion Floor Polish
volume 15.04
ASTM D4079-00(2006)
Standard Specification for Vapor-Degreasing Grade Methylene Chloride
volume 15.05
ASTM D4080-00(2006)
Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
volume 15.05
ASTM D4081-00(2006)
Standard Specification for Drycleaning-Grade Perchloroethylene
volume 15.05
ASTM D4082-02
Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power
Plants
volume 06.02
ASTM D4083-89(2001)e1
Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)
volume 04.08
ASTM D4084-05
Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate
Method)
volume 05.06
ASTM D4085-93(2003)
Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
volume 06.03
Vehicles
ASTM D4086-92a(2003)
Standard Practice for Visual Evaluation of Metamerism
volume 06.01
ASTM D4092-01
Standard Terminology: Plastics: Dynamic Mechanical Properties
volume 08.02
ASTM D4093-95(2005)e1
Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent
or Translucent Plastic Materials
volume 08.02
ASTM D4094-00
Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers
volume 08.02
ASTM D4095-97(2002)
Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor
Polishes
volume 15.04
ASTM D4096-91(2003)
Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (HighVolume Sampler Method)
volume 11.03
ASTM D4097-01
Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant
Tanks
volume 08.04
ASTM D4101-06
Standard Specification for Polypropylene Injection and Extrusion Materials
volume 08.02
ASTM D4102-82(2004)
Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers
volume 15.03
Composite Materials
ASTM D4103-90(2002)
Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
volume 15.04
ASTM D4104-96(2004)
Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers
by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)
volume 04.08
ASTM D4105-96(2002)
Standard Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of
Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
volume 04.08
ASTM D4106-96(2002)
Standard Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of
Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
volume 04.08
ASTM D4107-98(2002)e1
Standard Test Method for Tritium in Drinking Water
volume 11.02
Water (II)
ASTM D4109-02
Standard Performance Specification for Men's and Boys' Woven Coverall, Dungaree, Overall, and ShopCoat Fabrics
volume 07.01
ASTM D4111-02
Standard Performance Specification for Woven Napery and Tablecloth Fabrics Household and Institutional
volume 07.01
ASTM D4112-02
Standard Performance Specification for Woven Umbrella Fabrics
volume 07.01
ASTM D4113-02
Standard Performance Specification for Woven Slipcover Fabrics
volume 07.01
ASTM D4114-02
Standard Performance Specification for Woven Flat Lining Fabrics for Women's and Girls' Apparel
volume 07.01
ASTM D4115-02
Standard Performance Specification for Women's and Girls' Knitted and Woven Dress Glove Fabrics
volume 07.01
ASTM D4116-01
Standard Performance Specification for Women's and Girls' Knitted and Woven Corset-Girdle-Combination
Fabrics
volume 07.01
ASTM D4118-01
Standard Performance Specification for Women's Woven Coverall, Dungaree, Overall, and Shop Coat
Fabrics
volume 07.01
ASTM D4119-01
Standard Performance Specification for Men's and Boys' Knitted Dress Shirt Fabrics
volume 07.01
ASTM D4120-01
Standard Test Method for Fiber Cohesion in Roving, Sliver, and Top in Dynamic Tests
volume 07.01
ASTM D4122-05a
Standard Practice for Carbon Black—Evaluation of an Industry Reference Black
volume 09.01
ASTM D4124-01
Standard Test Methods for Separation of Asphalt into Four Fractions
volume 04.03
Systems
ASTM D4125-05
Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
volume 04.03
Systems
ASTM D4126-02
Standard Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane
volume 15.05
ASTM D4127-02
Standard Terminology Used with Ion-Selective Electrodes
volume 11.01
Water (I)
ASTM D4128-01
Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas
Chromatography and Electron Impact Mass Spectrometry
volume 11.02
Water (II)
ASTM D4129-05
Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by
Coulometric Detection
volume 11.02
Water (II)
ASTM D4130-03
Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines
volume 11.02
Water (II)
Strona 113
ASTM D4131-84(2005)
Standard Practice for Sampling Fish with Rotenone
volume 11.06
Biotechnology
ASTM D4132-82(2004)
Standard Practice for Sampling Phytoplankton with Conical Tow Nets
volume 11.06
Biotechnology
ASTM D4133-82(2004)
Standard Practice for Sampling Phytoplankton with Pumps
volume 11.06
Biotechnology
ASTM D4134-82(2004)
Standard Practice for Sampling Phytoplankton with a Clarke-Bumpus Plankton Sampler
volume 11.06
Biotechnology
ASTM D4135-82(2004)
Standard Practice for Sampling Phytoplankton With Depth-Integrating Samplers
volume 11.06
Biotechnology
ASTM D4136-82(2004)
Standard Practice for Sampling Phytoplankton with Water-Sampling Bottles
volume 11.06
Biotechnology
ASTM D4137-82(2004)
Standard Practice for Preserving Phytoplankton Samples
volume 11.06
Biotechnology
ASTM D4138-94(2001)e1
Standard Test Methods for Measurement of Dry Film Thickness of Protective Coating Systems by
Destructive Means
volume 06.02
ASTM D4139-04
Standard Guide for Determining Volatile and Nonvolatile Content of Pigments
volume 06.03
Vehicles
ASTM D4140-82(2002)
Standard Guide for Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores, and
Solvents
volume 06.01
ASTM D4141-01
Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
volume 06.01
ASTM D4142-89(2001)
Standard Guide for Testing Epoxy Resins
volume 06.03
Vehicles
ASTM D4143-89(2001)
Standard Guide for Testing Latex Vehicles
volume 06.03
Vehicles
ASTM D4144-94(2005)
Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
volume 06.01
ASTM D4145-83(2002)
Standard Test Method for Coating Flexibility of Prepainted Sheet
volume 06.02
ASTM D4146-96(2003)
Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel
volume 06.02
ASTM D4147-99(2003)
Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar
volume 06.02
ASTM D4148-82(2004)
Standard Test Method for Analysis of Phytoplankton in Surface Water by the Sedgwick-Rafter Method
volume 11.06
Biotechnology
ASTM D4149-82(2004)
Standard Classification for Sampling Phytoplankton in Surface Waters
volume 11.06
Biotechnology
ASTM D4150-03
Standard Terminology Relating to Gaseous Fuels
volume 05.06
ASTM D4151-92(2001)
Standard Test Method for Flammability of Blankets
volume 07.01
ASTM D4153-01
Standard Performance Specification for Men's, Women's, and Children's Woven Handkerchief Fabrics
volume 07.01
ASTM D4154-01
Standard Performance Specification for Men's and Boys' Knitted and Woven Beachwear and Sports Shirt
Fabrics
volume 07.01
ASTM D4155-01
Standard Performance Specification for Women's and Girls' Woven Sportswear, Shorts, Slacks, and Suiting
Fabrics
volume 07.01
ASTM D4156-01
Standard Performance Specification for Women's and Girls' Knitted Sportswear Fabrics
volume 07.01
ASTM D4157-02
Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)
volume 07.01
ASTM D4158-01
Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
volume 07.01
ASTM D4161-01(2005)
Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using
Flexible Elastomeric Seals
volume 08.04
ASTM D4164-03
Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
volume 05.05
ASTM D4165-00
Standard Test Method for Cyanogen Chloride in Water
volume 11.02
Water (II)
ASTM D4166-99(2004)e1
Standard Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital
Magnetic Intensity Instrument
volume 08.04
ASTM D4167-97(2002)
Standard Specification for Fiber-Reinforced Plastic Fans and Blowers
volume 08.04
ASTM D4168-95(2002)
Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials
volume 15.09
ASTM D4169-05
Standard Practice for Performance Testing of Shipping Containers and Systems
volume 15.09
ASTM D4170-97(2002)e1
Standard Test Method for Fretting Wear Protection by Lubricating Greases
volume 05.02
ASTM D4171-03
Standard Specification for Fuel System Icing Inhibitors
volume 05.02
ASTM D4172-94(2004)
Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
volume 05.02
ASTM D4174-89(2005)
Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
volume 05.02
ASTM D4175-05
Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
volume 05.02
ASTM D4176-04e1
Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection
Procedures)
volume 05.02
ASTM D4177-95(2005)
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
volume 05.02
ASTM D4178-82(2005)
Standard Practice for Calibrating Moisture Analyzers
volume 05.02
ASTM D4179-01
Standard Test Method for Single Pellet Crush Strength of Formed Catalyst Shapes
volume 05.05
ASTM D4180-03
Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
volume 05.05
ASTM D4182-97(2004)
Standard Practice for Evaluation of Laboratories Using ASTM Procedures in the Sampling and Analysis of
Coal and Coke
volume 05.06
ASTM D4185-96(2001)e1
Standard Practice for Measurement of Metals in Workplace Atmosphere by Flame Atomic Absorption
Spectrophotometry
volume 11.03
Strona 114
ASTM D4186-89(1998)e1
Standard Test Method for One-Dimensional Consolidation Properties of Soils Using Controlled-Strain
Loading
volume 04.08
ASTM D4188-82(2003)
Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test
volume 11.01
Water (I)
ASTM D4189-95(2002)
Standard Test Method for Silt Density Index (SDI) of Water
volume 11.01
Water (I)
ASTM D4190-03
Standard Test Method for Elements in Water by Direct-Current Argon Plasma Atomic Emission
Spectroscopy
volume 11.01
Water (I)
ASTM D4191-03
Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
volume 11.01
Water (I)
ASTM D4192-03
Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
volume 11.01
Water (I)
ASTM D4193-02
Standard Test Method for Thiocyanate in Water
volume 11.02
Water (II)
ASTM D4194-03
Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices
volume 11.02
Water (II)
ASTM D4195-88(2003)
Standard Guide for Water Analysis for Reverse Osmosis Application
volume 11.02
Water (II)
ASTM D4196-05
Standard Test Method for Confirming the Sterility of Membrane Filters
volume 11.02
Water (II)
ASTM D4198-82(2003)
Standard Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological
Analysis and Growth
volume 11.02
Water (II)
ASTM D4199-82(2003)
Standard Test Methods for Autoclavability of Membrane Filters
volume 11.02
Water (II)
ASTM D4200-82(2003)
Standard Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters
volume 11.02
Water (II)
ASTM D4203-00
Standard Specification for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
volume 08.02
ASTM D4204-00
Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
volume 08.02
ASTM D4206-96(2001)
Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus
volume 06.01
ASTM D4208-02e1
Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode
Method
volume 05.06
ASTM D4209-82(2002)
Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin
Solutions, Shellac, and Varnishes
volume 06.01
ASTM D4211-82(2004)
Classification for Fish Sampling
volume 11.06
Biotechnology
ASTM D4212-99(2005)
Standard Test Method for Viscosity by Dip-Type Viscosity Cups
volume 06.01
ASTM D4213-96(2003)
Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
volume 06.02
ASTM D4214-98
Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
volume 06.01
ASTM D4215-96(2002)
Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
volume 04.03
Systems
ASTM D4216-03
Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly (Vinyl
Chloride) (CPVC) Building Products Compounds
volume 08.02
ASTM D4217-02
Standard Test Method for Gel Time of Thermosetting Coating Powder
volume 06.02
ASTM D4218-96(2001)
Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the
Muffle-Furnace Technique
volume 08.02
ASTM D4219-02
Standard Test Method for Unconfined Compressive Strength Index of Chemical-Grouted Soils
volume 04.08
ASTM D4220-95(2000)
Standard Practices for Preserving and Transporting Soil Samples
volume 04.08
ASTM D4221-99(2005)
Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
volume 04.08
ASTM D4222-03
Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts By
Static Volumetric Measurements
volume 05.05
ASTM D4223-99
Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils
volume 04.08
ASTM D4225-03
Standard Specification for Styrene-Butadiene Sheeting
volume 08.02
ASTM D4226-05
Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
volume 08.04
ASTM D4227-99(2005)
Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces
volume 06.02
ASTM D4228-99(2005)
Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces
volume 06.02
ASTM D4230-02e1
Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
volume 11.03
ASTM D4231-01
Standard Practice for Evaluation of Launderable Woven Dress Shirts and Sports Shirts
volume 07.01
ASTM D4232-01
Standard Performance Specification for Men's and Women's Dress and Vocational Career Apparel Fabrics
volume 07.01
ASTM D4235-01
Standard Performance Specification for Women's and Girls' Knitted Blouse and Dress Fabrics
volume 07.01
ASTM D4236-94(2005)
Standard Practice for Labeling Art Materials for Chronic Health Hazards
volume 06.02
ASTM D4239-05
Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube
Furnace Combustion Methods
volume 05.06
ASTM D4241-98(2003)
Standard Practice for Design of Gas Turbine Generator Lubricating Oil Systems
volume 05.02
ASTM D4242-02
Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders
volume 06.02
ASTM D4243-99(2004)e1
Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged
Electrical Papers and Boards
volume 10.02
ASTM D4244-95(2001)
Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty AcrylonitrileButadiene/Poly(Vinyl Chloride) (NBR/PVC) Jackets for Wire and Cable
volume 10.02
ASTM D4245-02
Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C
Dry/75°C Wet Operation
volume 10.02
ASTM D4246-02
Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C
Operation
volume 10.02
ASTM D4248-98(2003)
Standard Practice for Design of Steam Turbine Generator Oil Systems
volume 05.02
ASTM D4249-83(2005)
Standard Test Method for Enumeration of Candida albicansin Water
volume 11.02
Water (II)
ASTM D4250-92(2003)
Standard Test Method for Water-Holding Capacity of Bibulous Fibrous Products
volume 15.09
Strona 115
ASTM D4251-89(2003)
Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
volume 15.04
ASTM D4252-89(2003)
Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
volume 15.04
ASTM D4253-00
Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
volume 04.08
ASTM D4254-00
Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative
Density
volume 04.08
ASTM D4255/D4255M-01
Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail
Shear Method
volume 15.03
Composite Materials
ASTM D4258-05
Standard Practice for Surface Cleaning Concrete for Coating
volume 06.02
ASTM D4259-88(1999)
Standard Practice for Abrading Concrete
volume 06.02
ASTM D4260-05
Standard Practice for Liquid and Gelled Acid Etching of Concrete
volume 06.02
ASTM D4261-83(1999)
Standard Practice for Surface Cleaning Concrete Unit Masonry for Coating
volume 06.02
ASTM D4262-05
Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
volume 06.02
ASTM D4263-83(2005)
Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
volume 06.02
ASTM D4265-98
Standard Guide for Evaluating Stain Removal Performance in Home Laundering
volume 15.04
ASTM D4266-96(2001)
Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
volume 11.02
Water (II)
ASTM D4267-95(2001)
Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers
volume 15.09
ASTM D4270-95(2001)
Standard Guide for Using Existing Practices in Developing and Writing Test Methods
volume 07.01
ASTM D4271-88(2001)
Standard Practice for Writing Statements on Sampling in Test Methods for Textiles
volume 07.01
ASTM D4272-03
Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
volume 08.02
ASTM D4273-05
Standard Test Methods for Polyurethane Raw Materials Determination of Primary Hydroxyl Content of
Polyether Polyols
volume 08.02
ASTM D4274-05
Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of
Polyols
volume 08.02
ASTM D4275-02
Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and
Ethylene-Vinyl Acetate (EVA) Copolymers By Gas Chromatography
volume 08.02
ASTM D4276-02
Standard Practice for Confined Area Entry
volume 15.05
ASTM D4277-83(1998)
Standard Guide for Testing Amino Resins
volume 06.03
Vehicles
ASTM D4278-02
Standard Practice for Wet Ashing Procedure for Preparing Wood Samples for Inorganic Chemical Analysis
volume 04.10
Wood
ASTM D4279-95(2003)
Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods
volume 15.09
ASTM D4280-04
Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
volume 04.03
Systems
ASTM D4281-95(2005)e1
Standard Test Method for Oil and Grease (Fluorocarbon Extractable Substances) by Gravimetric
Determination
volume 11.02
Water (II)
ASTM D4282-02
Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
volume 11.02
Water (II)
ASTM D4283-98(2004)
Standard Test Method for Viscosity of Silicone Fluids
volume 15.04
ASTM D4284-03
Standard Test Method for Determining Pore Volume Distribution of Catalysts by Mercury Intrusion
Porosimetry
volume 05.05
ASTM D4285-83(1999)
Standard Test Method for Indicating Oil or Water in Compressed Air
volume 06.02
ASTM D4286-90(1999)
Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric
Generation Facilities
volume 06.02
ASTM D4287-00(2005)
Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
volume 06.01
ASTM D4288-02
Standard Specification for Calcium Borosilicate Pigments
volume 06.03
Vehicles
ASTM D4289-03
Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
volume 05.02
ASTM D4290-02
Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under
Accelerated Conditions
volume 05.02
ASTM D4291-04
Standard Test Method for Trace Ethylene Glycol in Used Engine Oil
volume 05.02
ASTM D4292-92(2002)e1
Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
volume 05.02
ASTM D4293-83(2003)
Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication
volume 05.02
ASTM D4294-03
Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray
Fluorescence Spectrometry
volume 05.02
ASTM D4295-89(2005)
Standard Classification for Rubber Compounding Materials-Zinc Oxide
volume 09.01
ASTM D4296-83(2004)
Standard Practice for Sampling Pitch
volume 05.02
ASTM D4297-05
Standard Practice for Sampling and Handling Bisphenol A (4,4 -Isopropylidinediphenol)
volume 06.04
ASTM D4298-04
Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
volume 11.03
ASTM D4300-01
Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
volume 15.06
Adhesives
ASTM D4301-05
Standard Test Method for Total Chlorine in Epoxy Resins and Compounds
volume 06.03
Vehicles
ASTM D4302-05
Standard Specification for Artists' Oil, Resin-Oil, and Alkyd Paints
volume 06.02
Strona 116
ASTM D4303-03
Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials
volume 06.02
ASTM D4304-00
Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines
volume 05.02
ASTM D4305-98a(2004)e1
Standard Test Method for Filter Flow of Aviation Fuels at Low Temperatures
volume 05.02
ASTM D4306-01
Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
volume 05.02
ASTM D4307-99(2004)
Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
volume 05.02
ASTM D4308-95(2005)
Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
volume 05.02
ASTM D4309-02
Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the
Determination of Total Metals in Water
volume 11.01
Water (I)
ASTM D4310-03
Standard Test Method for Determination of the Sludging and Corrosion Tendencies of Inhibited Mineral Oils
volume 05.02
ASTM D4311-04
Standard Practice for Determining Asphalt Volume Correction to a Base Temperature
volume 04.03
Systems
ASTM D4312-95a(2005)
Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
volume 05.02
ASTM D4313-03
Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated
Polyethylene (CM) Jackets For Wire and Cable
volume 10.02
ASTM D4314-05
Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked
Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable
volume 10.02
ASTM D4315-94(2001)
Standard Test Methods for Rubber Compounding Material—Zinc Oxide
volume 09.01
ASTM D4316-95(2005)
Standard Specification for Elastomeric Water Bottles
volume 09.02
ASTM D4317-98(2004)
Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives
volume 15.06
Adhesives
ASTM D4318-05
Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
volume 04.08
ASTM D4320-04
Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Design
Strength Parameters
volume 04.08
ASTM D4321-04
Standard Test Method for Package Yield of Plastic Film
volume 08.02
ASTM D4322-96(2001)e1
Standard Test Method for Residual Acrylonitrile Monomer Styrene-Acrylonitrile Copolymers and Nitrile
Rubber by Headspace Gas Chromatography
volume 08.02
ASTM D4323-84(2003)
Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
volume 11.03
ASTM D4325-02
Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
volume 10.02
ASTM D4326-04
Standard Test Method for Major and Minor Elements in Coal and Coke Ash By X-Ray Fluorescence
volume 05.06
ASTM D4327-03
Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
volume 11.01
Water (I)
ASTM D4328-03
Standard Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium
Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines
volume 11.02
Water (II)
ASTM D4329-05
Standard Practice for Fluorescent UV Exposure of Plastics
volume 08.02
ASTM D4330-94(2002)
Standard Practice for Evaluation of Fiberglass Boat Polish and Wax
volume 15.04
ASTM D4332-01e1
Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing
volume 15.09
ASTM D4333-05
Test Method for the Compatibility Resistance of Mechanical Pump Dispenser Components
volume 15.09
ASTM D4334-05
Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
volume 15.09
ASTM D4335-99
Standard Test Method for the Determination of the Component Retention of a Mechanical Pump Dispenser
volume 15.09
ASTM D4336-05
Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser
volume 15.09
ASTM D4337-89(2003)
Standard Test Methods for Analysis of Linear Detergent Alkylates
volume 15.04
ASTM D4338-97(2004)
Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
volume 15.06
Adhesives
ASTM D4339-01
Standard Test Method for Determination of the Odor of Adhesives
volume 15.06
Adhesives
ASTM D4340-96(2001)
Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting
Conditions
volume 15.05
ASTM D4349-96(2004)
Classification System for Polyphenylene Ether (PPE) Materials
volume 08.02
ASTM D4350-00(2005)
Standard Test Method for Corrosivity Index of Plastics and Fillers
volume 08.02
ASTM D4354-99(2004)
Standard Practice for Sampling of Geosynthetics for Testing
volume 04.13
Geosynthetics
ASTM D4355-05
Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon
Arc Type Apparatus
volume 04.09
ASTM D4355-05
Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon
Arc Type Apparatus
volume 04.13
Geosynthetics
ASTM D4356-84(2002)
Standard Practice for Establishing Consistent Test Method Tolerances
volume 14.02
General Test Methods; Forensic
Psychophysiology ; Forensic Sciences;
Terminology; Conformity Assessment;
Statistical Methods; Nanotechnology
ASTM D4358-05
Standard Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type
Pigment Dusts by Atomic Absorption Spectroscopy
volume 06.01
ASTM D4359-90(2000)e1
Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
volume 06.01
ASTM D4360-03
Standard Specification for Methyl n-Amyl Ketone
volume 06.04
ASTM D4361-97(2002)
Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter
volume 06.02
ASTM D4362-93(2003)
Standard Specification for Propane Thermophysical Property Tables
volume 05.06
ASTM D4363-98(2003)
Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
volume 10.02
ASTM D4364-05
Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated
Sunlight
volume 08.02
Strona 117
ASTM D4365-95(2001)
Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
volume 05.05
ASTM D4367-02
Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography
volume 06.04
ASTM D4370-01
Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath
volume 06.01
ASTM D4371-91(1998)
Standard Test Method for Determining the Washability Characteristics of Coal
volume 05.06
ASTM D4373-02
Standard Test Method for Rapid Determination of Carbonate Content of Soils
volume 04.08
ASTM D4374-00
Standard Test Methods for Cyanides in Water--Automated Methods for Total Cyanide, Acid dissociable
Cyanide, and Thiocyanate
volume 11.02
Water (II)
ASTM D4375-96(2001)
Standard Practice for Basic Statistics in Committee D-19 on Water
volume 11.01
Water (I)
ASTM D4376-02
Standard Specification for Vapor-Degreasing Grade Perchloroethylene
volume 15.05
ASTM D4377-00e1
Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
volume 05.02
ASTM D4378-03
Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines
volume 05.02
ASTM D4380-84(2001)
Standard Test Method for Density of Bentonitic Slurries
volume 04.08
ASTM D4381-84(2001)
Standard Test Method for Sand Content by Volume of Bentonitic Slurries
volume 04.08
ASTM D4382-02
Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace
volume 11.01
Water (I)
ASTM D4383-05e1
Standard Specification for Plowable, Raised Retroreflective Pavement Markers
volume 04.03
Systems
ASTM D4385-02
Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products
volume 08.02
ASTM D4386-95(2002)
Standard Practice for Application of Floor Polishes to Maintain Multilayer Composite Tile or Flooring
volume 15.04
ASTM D4388-02
Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
volume 10.02
ASTM D4389-04
Standard Specification for Finished Glass Fabrics Woven From Rovings
volume 07.01
ASTM D4391-93a(2006)
Standard Termninology Relating to The Burning Behavior of Textiles
volume 07.01
ASTM D4393-04
Standard Test Method for Strap Peel Adhesion of Reinforcing Cords or Fabrics to Rubber Compounds
volume 07.02
Textiles (II): D4393 - latest
ASTM D4394-04
Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using the Rigid
Plate Loading Method
volume 04.08
ASTM D4395-04
Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using the Flexible
Plate Loading Method
volume 04.08
ASTM D4396-99ae1
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
volume 08.02
ASTM D4397-02
Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
volume 08.02
ASTM D4398-02
Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting
Resins by One-Side Panel Exposure
volume 08.04
ASTM D4399-05
Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
volume 06.01
ASTM D4400-99
Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator
volume 06.02
ASTM D4402-02
Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational
Viscometer
volume 04.04
ASTM D4403-84(2005)
Standard Practice for Extensometers Used in Rock
volume 04.08
ASTM D4404-84(2004)
Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by
Mercury Intrusion Porosimetry
volume 04.08
ASTM D4409-95(2003)
Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current
Meters
volume 11.01
Water (I)
ASTM D4410-03
Terminology for Fluvial Sediment
volume 11.01
Water (I)
ASTM D4411-03
Standard Guide for Sampling Fluvial Sediment in Motion
volume 11.02
Water (II)
ASTM D4412-84(2002)
Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits
volume 11.02
Water (II)
ASTM D4413-98(2003)
Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (Charcoal Tube
Methodology)
volume 11.03
ASTM D4414-95(2001)
Standard Practice for Measurement of Wet Film Thickness by Notch Gages
volume 06.01
ASTM D4415-05
Standard Test Methods for Determination of Dimer in Acrylic Acid
volume 06.04
ASTM D4416-04
Standard Specification for Acrylic Acid
volume 06.04
ASTM D4417-03
Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
volume 06.02
ASTM D4418-00
Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
volume 05.02
ASTM D4419-90(2005)
Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential
Scanning Calorimetry (DSC)
volume 05.02
ASTM D4422-03
Standard Test Method for Ash in Analysis of Petroleum Coke
volume 05.02
ASTM D4423-00
Standard Test Method for Determination of Carbonyls In C4Hydrocarbons
volume 05.02
ASTM D4424-90(2001)e1
Standard Test Method for Butylene Analysis by Gas Chromatography
volume 05.02
ASTM D4425-97(2002)
Standard Test Method for Oil Separation From Lubricating Grease by Centrifuging (Koppers Method)
volume 05.02
ASTM D4426-01
Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for
Wood Laminating
volume 15.06
Adhesives
ASTM D4427-92(2002)e1
Standard Classification of Peat Samples by Laboratory Testing
volume 04.08
ASTM D4428/D4428M-00
Standard Test Methods for Crosshole Seismic Testing
volume 04.08
ASTM D4429-04
Standard Test Method for CBR (California Bearing Ratio) of Soils in Place
volume 04.08
ASTM D4430-00(2006)
Standard Practice for Determining the Operational Comparability of Meteorological Measurements
volume 11.03
Strona 118
ASTM D4434-04
Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
volume 04.04
ASTM D4435-04
Standard Test Method for Rock Bolt Anchor Pull Test
volume 04.08
ASTM D4436-04
Standard Test Method for Rock Bolt Long-Term Load Retention Test
volume 04.08
ASTM D4437-99
Standard Practice for Determining the Integrity of Field Seams Used in Joining Flexible Polymeric Sheet
Geomembranes
volume 04.13
Geosynthetics
ASTM D4438-85(2001)e1
Standard Test Method for Particle Size Distribution of Catalytic Material by Electronic Counting
volume 05.05
ASTM D4439-04
Standard Terminology for Geosynthetics
volume 04.13
Geosynthetics
ASTM D4440-01
Standard Test Method for Plastics: Dynamic Mechanical Properties: Melt Rheology
volume 08.02
ASTM D4441-04
Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene
volume 08.02
ASTM D4442-92(2003)
Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
volume 04.10
Wood
ASTM D4443-95(2002)
Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl
Chloride Homo- and Co-Polymers by Headspace Gas Chromatography
volume 08.02
ASTM D4444-92(2003)
Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters
volume 04.10
Wood
ASTM D4445-03
Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory
Method)
volume 04.10
Wood
ASTM D4446-05
Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential
Swelling of Untreated Wood When Exposed to Liquid Water Environments
volume 06.02
ASTM D4447-84(2003)
Standard Guide for Disposal of Laboratory Chemicals and Samples
volume 11.04
Waste Management
ASTM D4448-01
Standard Guide for Sampling Ground-Water Monitoring Wells
volume 11.04
Waste Management
ASTM D4449-90(2004)
Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
volume 06.01
ASTM D4450-85(2002)
Standard Test Method for Analysis of Zinc Hydroxy Phosphite Pigment
volume 06.03
Vehicles
ASTM D4451-02
Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
volume 06.01
ASTM D4452-85(2002)e1
Standard Test Methods for X-Ray Radiography of Soil Samples
volume 04.08
ASTM D4453-02
Standard Practice for Handling of Ultra-Pure Water Samples
volume 11.01
Water (I)
ASTM D4454-85(2002)
Standard Test Method for Simultaneous Enumeration of Total and Respiring Bacteria in Aquatic Systems by
Microscopy
volume 11.02
Water (II)
ASTM D4455-85(2002)
Standard Test Method for Enumeration of Aquatic Bacteria by Epifluorescence Microscopy Counting
Procedure
volume 11.02
Water (II)
ASTM D4456-99(2005)
Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins
volume 11.02
Water (II)
ASTM D4457-02
Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and
Coatings by Direct Injection into a Gas Chromatograph
volume 06.01
ASTM D4458-05
Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines
volume 11.02
Water (II)
ASTM D4459-99
Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
volume 08.02
ASTM D4460-97(2005)
Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
volume 04.03
Systems
ASTM D4462-02
Standard Specification for Zinc Hydroxy Phosphite Pigment
volume 06.03
Vehicles
ASTM D4463-96(2001)
Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
volume 05.05
ASTM D4464-00(2005)
Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering
volume 05.05
ASTM D4465-05
Standard Performance Specification for Zippers for Denim Dungarees
volume 07.02
ASTM D4466-02
Standard Terminology for Multicomponent Textile Fibers
volume 07.02
ASTM D4467-94(2001)
Standard Practice for Interlaboratory Testing of a Textile Test Method That Produces Non-Normally
Distributed Data
volume 07.02
ASTM D4468-85(2000)
Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry
volume 05.06
ASTM D4469-01
Standard Test Method for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement
Mixture
volume 04.03
Systems
ASTM D4470-97(2004)
Standard Test Method for Static Electrification
volume 10.02
ASTM D4471-00(2004)
Standard Test Method for Pyridine Bases in Cresylic Acid by Direct Titration
volume 06.04
ASTM D4472-89(2003)
Standard Guide for Recordkeeping for Reverse Osmosis Systems
volume 11.02
Water (II)
ASTM D4473-03
Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
volume 08.02
ASTM D4474-00
Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion
Materials (TES)
volume 08.02
ASTM D4475-02
Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By The
Short-Beam Method
volume 08.02
ASTM D4476-03
Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
volume 08.02
ASTM D4477-04a
Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
volume 08.04
ASTM D4479-00
Standard Specification for Asphalt Roof Coatings - Asbestos-Free
volume 04.04
ASTM D4481-04
Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
volume 05.05
ASTM D4482-06
Standard Test Method for Rubber Property-Extension Cycling Fatigue
volume 09.01
ASTM D4483-05a
Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black
Manufacturing Industries
volume 09.01
ASTM D4485-05a
Standard Specification for Performance of Engine Oils
volume 05.02
ASTM D4486-91(2001)
Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids
volume 05.02
Strona 119
ASTM D4487-90(2003)
Standard Test Methods for Analysis of Calcium Borosilicate
volume 06.03
Vehicles
ASTM D4488-95(2001)e1
Standard Guide for Testing Cleaning Performance of Products Intended for Use on Resilient Flooring and
Washable Walls
volume 15.04
ASTM D4489-95(2001)
Standard Practices for Sampling of Waterborne Oils
volume 11.02
Water (II)
ASTM D4490-96(2006)e1
Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
volume 11.03
ASTM D4491-99a(2004)
Standard Test Methods for Water Permeability of Geotextiles by Permittivity
volume 04.13
Geosynthetics
ASTM D4492-03
Standard Test Method for Analysis of Benzene by Gas Chromatography
volume 06.04
ASTM D4493-03
Standard Test Method for Solidification Point of Bisphenol A (4,4´-Isopropylidenediphenol)
volume 06.04
ASTM D4494-95(2004)
Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene
volume 15.05
ASTM D4495-00(2005)
Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a
Falling Weight
volume 08.04
ASTM D4496-04
Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
volume 10.02
ASTM D4497-94(2004)e1
Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)
volume 15.06
Adhesives
ASTM D4498-00
Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives
volume 15.06
Adhesives
ASTM D4499-95(2000)
Standard Test Method for Heat Stability of Hot-Melt Adhesives
volume 15.06
Adhesives
ASTM D4501-01e1
Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear
Method
volume 15.06
Adhesives
ASTM D4502-92(2004)
Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints
volume 15.06
Adhesives
ASTM D4503-86(2003)
Standard Practice for Dissolution of Solid Waste by Lithium Metaborate Fusion
volume 11.04
Waste Management
ASTM D4504-94(2005)
Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous
Goods
volume 15.09
ASTM D4505-05
Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life
volume 04.03
Systems
ASTM D4506-02
Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using a Radial
Jacking Test
volume 04.08
ASTM D4508-06
Standard Test Method for Chip Impact Strength of Plastics
volume 08.02
ASTM D4510-05
Standard Test Method for Counting Particle Cleavages in Wool and Other Animal Fibers
volume 07.02
ASTM D4511-00
Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
volume 04.08
ASTM D4512-03
Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles
and Powder
volume 05.05
ASTM D4513-97(2001)e1
Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
volume 05.05
ASTM D4514-00
Standard Specification for Friction Tape
volume 10.02
ASTM D4515-85(2001)
Standard Practice for Estimation of Holding Time for Water Samples Containing Organic Constituents
volume 11.02
Water (II)
ASTM D4516-00
Standard Practice for Standardizing Reverse Osmosis Performance Data
volume 11.02
Water (II)
ASTM D4517-04
Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption
Spectroscopy
volume 11.02
Water (II)
ASTM D4519-94(2005)
Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by
Cation Exchange and Degassed Cation Conductivity
volume 11.01
Water (I)
ASTM D4520-03
Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods
volume 11.02
Water (II)
ASTM D4522-04
Standard Performance Specification for Feather and Down Fillings for Textile Products
volume 07.02
ASTM D4524-86(2005)
Standard Test Method for Composition of Plumage
volume 07.02
ASTM D4525-04
Standard Test Method for Permeability of Rocks by Flowing Air
volume 04.08
ASTM D4526-96(2001)e1
Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
volume 08.02
ASTM D4527-99(2004)
Standard Test Methods for Carbon Black—Solvent Extractables
volume 09.01
ASTM D4528-88(2002)
Standard Classification for Rubber Compounding Materials—Sulfur
volume 09.01
ASTM D4529-01
volume 05.02
ASTM D4530-03
Standard Test Method for Determination of Carbon Residue (Micro Method)
volume 05.02
ASTM D4531-86(2002)
Standard Test Methods for Bulk Density of Peat and Peat Products
volume 04.08
ASTM D4532-97(2003)
Standard Test Method for Respirable Dust in Workplace Atmospheres
volume 11.03
ASTM D4533-04
Standard Test Method for Trapezoid Tearing Strength of Geotextiles
volume 04.13
Geosynthetics
ASTM D4534-99
Standard Test Method for Benzene Content of Cyclic Products by Gas Chromatography
volume 06.04
ASTM D4535-85(2004)
Standard Test Methods for Measurement of Thermal Expansion of Rock Using a Dilatometer
volume 04.08
ASTM D4537-04a
Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating Work
Inspection in Nuclear Facilities
volume 06.02
ASTM D4538-95(2004)
Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
volume 06.02
ASTM D4539-03e1
Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
volume 05.02
ASTM D4541-02
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
volume 06.02
ASTM D4542-95(2001)
Standard Test Method for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by
Refractometer
volume 04.08
ASTM D4543-04
Standard Practices for Preparing Rock Core Specimens and Determining Dimensional and Shape
Tolerances
volume 04.08
ASTM D4544-86(2002)
Standard Practice for Estimating Peat Deposit Thickness
volume 04.08
ASTM D4545-86(1999)
Standard Practice for Determining the Integrity of Factory Seams Used in Joining Manufactured Flexible
Sheet Geomembranes
volume 04.13
Geosynthetics
Strona 120
ASTM D4546-03
Standard Test Methods for One-Dimensional Swell or Settlement Potential of Cohesive Soils
volume 04.08
ASTM D4547-06
Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds
volume 11.04
Waste Management
ASTM D4548-91(2002)
Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
volume 11.02
Water (II)
ASTM D4549-03
Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials
(PS)
volume 08.02
ASTM D4551-96(2001)
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment
Membrane
volume 08.04
ASTM D4552-92(2004)
Standard Practice for Classifying Hot-Mix Recycling Agents
volume 04.03
Systems
ASTM D4553-02
Standard Test Method for Determining In Situ Creep Characteristics of Rock
volume 04.08
ASTM D4554-02
Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities
volume 04.08
ASTM D4555-01(2005)
Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial
Compressive Test
volume 04.08
ASTM D4555-01(2005)
Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial
Compressive Test
volume 04.09
ASTM D4559-99(2004)
Standard Test Method for Volatile Matter in Silicone Fluid
volume 10.03
ASTM D4561-96(2001)
Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving
Materials
volume 04.03
Systems
ASTM D4562-01
Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
volume 15.06
Adhesives
ASTM D4563-02
Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of
Pigments Recovered From Whole Paint
volume 06.01
ASTM D4564-02a
Standard Test Method for Density of Soil in Place by the Sleeve Method
volume 04.08
ASTM D4565-99(2004)e1
Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets
for Telecommunications Wire and Cable
volume 10.02
ASTM D4566-05e1
Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for
Telecommunications Wire and Cable
volume 10.02
ASTM D4567-03
Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst
Carriers Using Nitrogen Adsorption by Continuous Flow Method
volume 05.05
ASTM D4568-99(2004)e1
Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And
Polyolefin Wire and Cable Materials
volume 10.02
ASTM D4569-02
Standard Test Method for Rubber Chemicals—Determination of Acidity in Sulfur
volume 09.01
ASTM D4570-02
Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)
volume 09.01
ASTM D4571-02
Standard Test Methods for Rubber Chemicals—Determination of Volatile Material
volume 09.01
ASTM D4572-89(2005)
Standard Test Method for Rubber Chemicals-Wet Sieve Analysis of Sulfur
volume 09.01
ASTM D4573-03
Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur
volume 09.01
ASTM D4574-02
Standard Test Methods for Rubber Chemicals—Determination of Ash Content
volume 09.01
ASTM D4575-99(2005)
Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining
Ozone Level in Laboratory Test Chambers
volume 09.01
ASTM D4576-01
Standard Test Method for Mold Growth Resistance of Wet Blue
volume 15.04
ASTM D4577-05
Standard Test Method for Compression Resistance of a Container Under Constant Load
volume 15.09
ASTM D4578-89(2002)
Standard Test Methods for Rubber Chemicals—Determination of Percent Insoluble Sulfur by Solvent
Extraction
volume 09.01
ASTM D4579-00(2006)
Standard Practice for Handling an Acid Degreaser or Still
volume 15.05
ASTM D4580-03
Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding
volume 04.03
Systems
ASTM D4581-86(2005)
Standard Guide for Measurement of Morphologic Characteristics of Surface Water Bodies
volume 11.02
Water (II)
ASTM D4582-05
Standard Practice for Calculation and Adjustment of the Stiff and Davis Stability Index for Reverse Osmosis
volume 11.02
Water (II)
ASTM D4583-95(2004)
Standard Practice for Carbon Black—Calculation of Process Indexes From an Analysis of Process Control
Data
volume 09.01
ASTM D4584-05
Standard Test Method for Measuring Apparent pH of Electrocoat Baths
volume 06.01
ASTM D4585-99
Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
volume 06.01
ASTM D4586-00
Standard Specification for Asphalt Roof Cement, Asbestos-Free
volume 04.04
ASTM D4587-05
Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
volume 06.01
ASTM D4590-00
Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS
(alpha-Methylstyrene) by Spectrophotometry
volume 06.04
ASTM D4591-01
Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by
Differential Scanning Calorimetry
volume 08.02
ASTM D4592-05
Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life
volume 04.03
Systems
ASTM D4594-96(2003)
Standard Test Method for Effects of Temperature on Stability of Geotextiles
volume 04.13
Geosynthetics
ASTM D4595-05
Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
volume 04.13
Geosynthetics
ASTM D4596-99(2004)
Standard Practice for Collection of Channel Samples of Coal in a Mine
volume 05.06
ASTM D4597-03
Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent
Diffusive Samplers
volume 11.03
ASTM D4599-03
Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain
Dosimeters
volume 11.03
ASTM D4600-95(2005)
Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
volume 11.03
ASTM D4601-04
Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
volume 04.04
Strona 121
ASTM D4602-93(2002)
Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection
Equipment
volume 04.03
Systems
ASTM D4603-03
Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass
Capillary Viscometer
volume 08.02
ASTM D4606-03
Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic
Absorption Method
volume 05.06
ASTM D4607-94(1999)
Standard Test Method for Determination of Iodine Number of Activated Carbon
volume 15.01
Ceramics
ASTM D4608-89(2003)
Standard Test Method for Citrate in Detergents
volume 15.04
ASTM D4609-01
Standard Guide for Evaluating Effectiveness of Chemicals for Soil Stabilization
volume 04.08
ASTM D4610-98(2004)
Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint
and Related Coatings
volume 06.01
ASTM D4611-86(2004)
Standard Test Method for Specific Heat of Rock and Soil
volume 04.08
ASTM D4612-03
Standard Practice for Calculating Thermal Diffusivity of Rocks
volume 04.08
ASTM D4614-05
Standard Specification for Ethyl Acetate (All Grades)
volume 06.04
ASTM D4615-95(2001)
Standard Specification for n-Butyl Acetate (All Grades)
volume 06.04
ASTM D4616-95(2005)
Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a
Pitch
volume 05.02
ASTM D4617-03
Standard Classification System for Phenolic Compounds (PF)
volume 08.02
ASTM D4618-92(2003)
Standard Specification for Design and Fabrication of Flue Gas Desulfurization System Components for
Protective Lining Application
volume 06.02
ASTM D4619-96(2004)
Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems
volume 06.02
ASTM D4620-02
Standard Test Method for Evaluating the Effective Surface Area of Zinc-Oxide in Rubber
volume 09.01
ASTM D4621-99(2004)
Standard Guide for Quality Management in an Organization That Samples or Tests Coal and Coke
volume 05.06
ASTM D4623-05
Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method-USBM
Borehole Deformation Gage
volume 04.08
ASTM D4625-04
Standard Test Method for Distillate Fuel Storage Stability at 43°C (110°F)
volume 05.02
ASTM D4626-95(2005)
Standard Practice for Calculation of Gas Chromatographic Response Factors
volume 05.02
ASTM D4627-92(2002)
Standard Test Method for Iron Chip Corrosion for Water—Dilutable Metalworking Fluids
volume 05.02
ASTM D4628-05
Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc In Unused Lubricating Oils By
Atomic Absorption Spectrometry
volume 05.02
ASTM D4629-02
Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative
Combustion and Chemiluminescence Detection
volume 05.02
ASTM D4630-96(2002)
Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by
In Situ Measurements Using the Constant Head Injection Test
volume 04.08
ASTM D4631-95(2000)
Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ
Measurements Using Pressure Pulse Technique
volume 04.08
ASTM D4632-91(2003)
Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
volume 04.13
Geosynthetics
ASTM D4633-05
Standard Test Method for Energy Measurement for Dynamic Penetrometers
volume 04.08
ASTM D4634-04
Standard Specification for Styrene-Maleic Anhydride Materials (S/MA)
volume 08.02
ASTM D4635-01
Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and
Packaging Applications
volume 08.02
ASTM D4636-99(2004)e1
Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine
Lubricants, and Other Highly Refined Oils
volume 05.02
ASTM D4637-04
Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
volume 04.04
ASTM D4638-03
Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
volume 11.01
Water (I)
ASTM D4640-86(2001)
Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
volume 06.03
Vehicles
ASTM D4641-94(1999)e1
Standard Practice for Calculation of Pore Size Distributions of Catalysts from Nitrogen Desorption Isotherms
volume 05.05
ASTM D4642-04
Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
volume 05.05
ASTM D4643-00
Standard Test Method for Determination of Water (Moisture) Content of Soil by the Microwave Oven Method
volume 04.08
ASTM D4644-04
Standard Test Method for Slake Durability of Shales and Similar Weak Rocks
volume 04.08
ASTM D4645-04e1
Standard Test Method for Determination of the In-Situ Stress in Rock Using the Hydraulic Fracturing Method
volume 04.08
ASTM D4646-03
Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
volume 11.04
Waste Management
ASTM D4647-93(2006)
Standard Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
volume 04.08
ASTM D4648-05
Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
volume 04.08
ASTM D4649-03
Standard Guide for Selection and Use of Stretch Wrap Films
volume 15.09
ASTM D4650-93(2003)
Standard Specification for Normal Butane Thermophysical Property Tables
volume 05.06
ASTM D4651-93(2003)
Standard Specification for Isobutane Thermophysical Property Tables
volume 05.06
ASTM D4652-05
Standard Specification for Silicone Fluid Used for Electrical Insulation
volume 10.03
ASTM D4653-87(2003)
Standard Test Method for Total Chlorides in Leather
volume 15.04
ASTM D4654-87(2003)
Standard Test Method for Sulfate Basicity in Leather
volume 15.04
ASTM D4655-95(2001)
Standard Test Methods for Sulfates in Leather (Total, Neutral, and Combined Acid)
volume 15.04
ASTM D4658-03
Standard Test Method for Sulfide Ion in Water
volume 11.01
Water (I)
Strona 122
ASTM D4659-03
Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates
volume 08.02
ASTM D4660-00(2006)e1
Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of
Toluenediisocyanate
volume 08.02
ASTM D4661-03
Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates
volume 08.02
ASTM D4662-03
Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of
Polyols
volume 08.02
ASTM D4663-98(2004)
Standard Test Method for Polyurethane Raw Materials Determination of Hydrolyzable Chlorine of
Isocyanates
volume 08.02
ASTM D4669-98(2002)e1
Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols
volume 08.02
ASTM D4670-97(2002)
Standard Test Method for Polyurethane Raw Materials Determination of Suspended Matter In Polyols
volume 08.02
ASTM D4671-05
Standard Test Method for Polyurethane Raw Materials Determination of Unsaturation of Polyols
volume 08.02
ASTM D4672-00(2006)e1
Standard Test Methods for Polyurethane Raw Materials: Determination of Water Content of Polyols
volume 08.02
ASTM D4673-02
Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and
Extrusion Materials
volume 08.02
ASTM D4674-02a
Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office
Environments
volume 08.02
ASTM D4675-03
Standard Guide for Selection and Use of Flat Strapping Materials
volume 15.09
ASTM D4676-94(2001)
Standard Classification for Rubber Compounding Materials—Antidegradents
volume 09.01
ASTM D4677-87(2002)
Standard Classification for Rubber Compounding Materials—Titanium Dioxide
volume 09.01
ASTM D4678-04
Standard Practice for Rubber-Preparation, Testing, Acceptance, Documentation, and Use of Reference
Materials
volume 09.01
ASTM D4679-02
Standard Specification for Rubber General Purpose, Household or Beautician Gloves
volume 09.02
ASTM D4680-98(2004)
Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading
(Wood-to-Wood)
volume 15.06
Adhesives
ASTM D4682-87(2002)
Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine
Lubricants
volume 05.02
ASTM D4683-04
Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered
Bearing Simulator
volume 05.02
ASTM D4684-02a
Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low
Temperature
volume 05.02
ASTM D4686-91(2003)
Standard Guide for Identification and Transformation of Frequency Distributions
volume 07.02
ASTM D4687-95(2006)
Standard Guide for General Planning of Waste Sampling
volume 11.04
Waste Management
ASTM D4688-99(2005)
Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
volume 15.06
Adhesives
ASTM D4689-99(2005)
Standard Specification for Adhesive, Casein-Type
volume 15.06
Adhesives
ASTM D4690-99(2005)
Standard Specification for Urea-Formaldehyde Resin Adhesives
volume 15.06
Adhesives
ASTM D4691-02
Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
volume 11.01
Water (I)
ASTM D4692-01
Standard Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO4, SrSO4, and BaSO4) for
Reverse Osmosis and Nanofiltration
volume 11.02
Water (II)
ASTM D4693-03
Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
volume 05.02
ASTM D4694-96(2003)
Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
volume 04.03
Systems
ASTM D4695-03
Standard Guide for General Pavement Deflection Measurements
volume 04.03
Systems
ASTM D4696-92(2000)
Standard Guide for Pore-Liquid Sampling from the Vadose Zone
volume 04.08
ASTM D4697-95(2001)
Standard Guide for Maintaining Test Methods in the User's Laboratory
volume 07.02
ASTM D4698-92(2001)
Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
volume 11.02
Water (II)
ASTM D4699-03
Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Particles
volume 05.05
ASTM D4700-91(1998)e1
Standard Guide for Soil Sampling from the Vadose Zone
volume 04.08
ASTM D4701-00(2006)
Standard Specification for Technical Grade Methylene Chloride
volume 15.05
ASTM D4702-06
Standard Practice for Quality Management of Mechanical Coal Sampling Systems
volume 05.06
ASTM D4703-03
Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or
Sheets
volume 08.02
ASTM D4704-00(2005)
Standard Test Method for Tearing Strength, Tongue Tear of Leather
volume 15.04
ASTM D4705-00(2005)
Standard Test Method for Stitch Tear Strength of Leather, Double Hole
volume 15.04
ASTM D4706-93(1998)
Standard Test Method for Qualitative Determination of Methylol Group in Phenolic Resins
volume 06.03
Vehicles
ASTM D4707-97(2003)e1
Standard Test Method for Measuring Paint Spatter Resistance During Roller Application
volume 06.02
ASTM D4708-99(2004)
Standard Practice for Preparation of Uniform Free Films of Organic Coatings
volume 06.01
ASTM D4709-02
Standard Specification for Methyl Acrylate
volume 06.04
ASTM D4710-02
Standard Specification for Acetaldehyde
volume 06.04
ASTM D4711-89(2003)
Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids
volume 15.04
ASTM D4712-87a(2005)
Standard Guide for Testing Industrial Water-Reducible Coatings
volume 06.02
ASTM D4713-92(2002)
Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems
volume 06.02
ASTM D4714-96(2001)
Standard Test Method for Determination of Effect of Moist Heat (50% Relative Humidity and 90°C) on
Properties of Paper and Board
volume 15.09
Strona 123
ASTM D4715-98(2003)
Standard Test Method for Coking Value of Tar and Pitch (Alcan)
volume 05.02
ASTM D4716-04
Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a
Geosynthetic Using a Constant Head
volume 04.13
Geosynthetics
ASTM D4718-87(2001)
Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
volume 04.08
ASTM D4719-00
Standard Test Method for Prebored Pressuremeter Testing in Soils
volume 04.08
ASTM D4720-87(2000)
Standard Practice for Evaluation of the Performance of Soft Window Coverings
volume 07.02
ASTM D4721-89(2000)
Standard Practice for Evaluation of the Performance of Machine Washable and Drycleanable Bedcoverings
and Accessories
volume 07.02
ASTM D4723-99
Standard Index of and Descriptions of Textile Heat and Flammability Test Methods and Performance
Specifications
volume 07.02
ASTM D4724-99(2005)
Standard Test Methods for Degree of Filament Yarn Entanglement by Needle Insertion Methods
volume 07.02
ASTM D4725-06
Standard Termninology for Engine Coolants
volume 15.05
ASTM D4726-02
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled
Windows and Doors
volume 08.04
ASTM D4727/D4727M-05
Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
volume 15.09
ASTM D4728-01
Standard Test Method for Random Vibration Testing of Shipping Containers
volume 15.09
ASTM D4729-04
Standard Test Method for In Situ Stress and Modulus of Deformation Using the Flatjack Method
volume 04.08
ASTM D4730-02
Standard Specification for Flooding Compounds for Telecommunications Wire and Cable
volume 10.02
ASTM D4731-02
Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
volume 10.02
ASTM D4732-02
Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
volume 10.02
ASTM D4733-03
Standard Test Methods for Solventless Electrical Insulating Varnishes
volume 10.02
ASTM D4734-04
Standard Specification for Refined Benzene-545
volume 06.04
ASTM D4735-02
Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography
volume 06.04
ASTM D4737-04
Standard Test Method for Calculated Cetane Index by Four Variable Equation
volume 05.02
ASTM D4739-05
Standard Test Method for Base Number Determination by Potentiometric Titration
volume 05.02
ASTM D4740-04
Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
volume 05.02
ASTM D4741-00
Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug
Viscometer
volume 05.02
ASTM D4742-02a
Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen
Uptake (TFOUT)
volume 05.02
ASTM D4745-01
Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion
Materials
volume 08.02
ASTM D4746-98(2003)e1
Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
volume 05.02
ASTM D4747-02
Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid
Chromatography
volume 06.01
ASTM D4748-98
Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
volume 04.03
Systems
ASTM D4749-87(2002)e1
Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
volume 05.06
ASTM D4750-87(2001)
Standard Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well
(Observation Well)
volume 04.08
ASTM D4751-04
Standard Test Method for Determining Apparent Opening Size of a Geotextile
volume 04.13
Geosynthetics
ASTM D4752-03
Standard Test Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by
Solvent Rub
volume 06.02
ASTM D4753-02
Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil,
Rock, and Construction Materials Testing
volume 04.08
ASTM D4754-98(2003)
Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
volume 08.02
ASTM D4755-95(2004)
Standard Test Method for Free Halogens in Halogenated Organic Solvents and Their Admixtures
volume 15.05
ASTM D4756-03
Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit
volume 08.04
ASTM D4758-92(1998)
Standard Test Method for Nonvolatile Content of Latexes
volume 06.03
Vehicles
ASTM D4759-02
Standard Practice for Determining the Specification Conformance of Geosynthetics
volume 04.13
Geosynthetics
ASTM D476-00(2005)
Standard Classification for Dry Pigmentary Titanium Dioxide Products
volume 06.03
Vehicles
ASTM D4761-05
Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
volume 04.10
Wood
ASTM D4762-04
Standard Guide for Testing Polymer Matrix Composite Materials
volume 15.03
Composite Materials
ASTM D4763-88(2001)
Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy
volume 11.02
Water (II)
ASTM D4764-01
Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in
Paint
volume 06.01
ASTM D4765-03
Standard Test Method for Fluorides in Workplace Atmospheres
volume 11.03
ASTM D4766-98(2003)
Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)
volume 11.03
ASTM D4767-04
Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
volume 04.08
ASTM D4768-03
Standard Test Method for Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6-Ditertiary- Butyl Phenol in
Insulating Liquids by Gas Chromatography
volume 10.03
ASTM D4769-88(2000)
Standard Specification for Woven and Warp Knitted Comforter Fabrics
volume 07.02
ASTM D4770-00
Standard Test Method for Appearance and Integrity of Highloft Battting After Refurbishing
volume 07.02
Strona 124
ASTM D4771-02
Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture
volume 07.02
ASTM D4772-97(2004)
Standard Test Method for Surface Water Absorption of Terry Fabrics (Water Flow)
volume 07.02
ASTM D4773-02
Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl
Ether, and Propylene Glycol Monomethyl Ether Acetate
volume 06.04
ASTM D4774-94(2000)
Standard Specification for User Applied Drug Labels in Anesthesiology
volume 15.09
ASTM D4775-04
Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for
Drugs (Excluding Pharmacy Bulk Packages)
volume 15.09
ASTM D4776-04
Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by HTest Procedure
volume 07.02
ASTM D4778-05
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat
Transfer Conditions
volume 11.01
Water (I)
ASTM D4780-95(2001)
Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption
volume 05.05
ASTM D4781-03
Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst
Carrier Particles
volume 05.05
ASTM D4782-04
Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
volume 05.05
ASTM D4783-01
Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast,
and Fungi
volume 15.06
Adhesives
ASTM D4784-93(2003)
Standard for LNG Density Calculation Models
volume 05.06
ASTM D4785-00a
Standard Test Method for Low-Level Iodine-131 in Water
volume 11.02
Water (II)
ASTM D4786-00(2005)
Standard Test Method for Stitch Tear Strength, Single Hole
volume 15.04
ASTM D4787-93(1999)
Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
volume 06.02
ASTM D4788-03
Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
volume 04.03
Systems
ASTM D4789-03
Standard Test Method for Solution Color of Bisphenol A (4,4´-Isopropylidenediphenol)
volume 06.04
ASTM D4790-99(2004)
Standard Termninology of Aromatic Hydrocarbons and Related Chemicals
volume 06.04
ASTM D4791-05
Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse
Aggregate
volume 04.03
Systems
ASTM D4792-00
Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions
volume 04.03
Systems
ASTM D4793-93(2004)
Standard Test Method for Sequential Batch Extraction of Waste with Water
volume 11.04
Waste Management
ASTM D4794-94(2003)
Standard Test Method for Determination of Ethoxyl or Hydroxyethoxyl Substitution in Cellulose Ether
Products by Gas Chromatography
volume 06.03
Vehicles
ASTM D4795-94(2003)
Standard Test Method for Nitrogen Content of Soluble Nitrocellulose—Alternative Method
volume 06.03
Vehicles
ASTM D4796-88(2004)
Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
volume 06.02
ASTM D4797-88(2004)
Standard Test Methods for Chemical and Gravimetric Analysis of White and Yellow Thermoplastic Traffic
Marking Containing Lead Chromate and Titanium Dioxide
volume 06.02
ASTM D4798-04
Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials
(Xenon-Arc Method)
volume 04.04
ASTM D4799-03
Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials
(Fluorescent UV, Water Spray, and Condensation Method)
volume 04.04
ASTM D4800-94(2005)
Standard Guide for Classifying and Specifying Adhesives
volume 15.06
Adhesives
ASTM D4801-05
Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater
volume 08.02
ASTM D4802-02
Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
volume 08.02
ASTM D4803-97(2002)e1
Standard Test Method for Predicting Heat Buildup in PVC Building Products
volume 08.04
ASTM D4804-03
Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
volume 08.02
ASTM D4806-04a
Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive SparkIgnition Engine Fuel
volume 05.02
ASTM D4807-05e1
Standard Test Method for Sediment in Crude Oil by Membrane Filtration
volume 05.02
ASTM D4808-01
Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua
by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
volume 05.02
ASTM D4809-00(2005)
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision
Method)
volume 05.02
ASTM D4810-06
Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
volume 05.06
ASTM D4811-04
Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
volume 04.04
ASTM D4812-06
Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
volume 08.02
ASTM D4814-04be1
Standard Specification for Automotive Spark-Ignition Engine Fuel
volume 05.02
ASTM D4815-04
Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1to
C4Alcohols in Gasoline by Gas Chromatography
volume 05.02
ASTM D4817-88(2005)
Standard Classification for Rubber Compounding Materials-Stearic Acid
volume 09.01
ASTM D4818-89(2005)
Standard Classification for Rubber Compounding Materials-Vulcanization Accelerators
volume 09.01
ASTM D4819-96(2005)
Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
volume 08.02
ASTM D4821-05
Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
volume 09.01
ASTM D4822-88(2003)
Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)
volume 11.02
Water (II)
ASTM D4823-95(2003)e1
Standard Guide for Core Sampling Submerged, Unconsolidated Sediments
volume 11.02
Water (II)
ASTM D4824-03
Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
volume 05.05
Strona 125
ASTM D4825-97(2002)
Standard Test Method for Measurement of Curl in Cut-Sized Office Paper
volume 15.09
ASTM D4826-88(2002)
Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard
volume 15.09
ASTM D4827-03
Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column
Gas Chromatography
volume 06.01
ASTM D4828-94(2003)e1
Standard Test Methods for Practical Washability of Organic Coatings
volume 06.02
ASTM D4829-03
Standard Test Method for Expansion Index of Soils
volume 04.08
ASTM D4830-98
Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing
volume 04.04
ASTM D4831-00(2005)
Standard Test Method for Buckle Tear Strength of Leather
volume 15.04
ASTM D4832-02
Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test
Cylinders
volume 04.08
ASTM D4833-00e1
Standard Test Method for Index Puncture Resistance of Geotextiles, Geomembranes, and Related Products
volume 04.13
Geosynthetics
ASTM D4834-03
Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
volume 06.01
ASTM D4835-03
Standard Specification for Propylene Glycol Monomethyl Ether Acetate
volume 06.04
ASTM D4836-04
Standard Specification for Dipropylene Glycol Monomethyl Ether
volume 06.04
ASTM D4837-02
Standard Specification for Propylene Glycol Monomethyl Ether
volume 06.04
ASTM D4838-88(2003)
Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints
volume 06.02
ASTM D4839-03
Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation,
or Both, and Infrared Detection
volume 11.02
Water (II)
ASTM D4840-99(2004)
Standard Guide for Sampling Chain-of-Custody Procedures
volume 11.01
Water (I)
ASTM D4841-88(2003)
Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic
Constituents
volume 11.01
Water (I)
ASTM D4842-90(2001)
Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
volume 11.04
Waste Management
ASTM D4843-88(2004)e1
Standard Test Method for Wetting and Drying Test of Solid Wastes
volume 11.04
Waste Management
ASTM D4844-03
Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection
volume 11.04
Waste Management
ASTM D4845-05
Standard Terminology Relating to Wool
volume 07.02
ASTM D4846-96(2004)
Standard Test Method for Resistance to Unsnapping of Snap Fasteners
volume 07.02
ASTM D4847-02
Standard Specification for Woven Awning and Canopy Fabrics
volume 07.02
ASTM D4848-98(2004)
Standard Terminology of Force, Deformation and Related Properties of Textiles
volume 07.02
ASTM D4849-02be1
Standard Termninology Relating to Yarns and Fibers
volume 07.02
ASTM D4850-03a
Standard Terminology Relating to Fabric
volume 07.02
ASTM D4851-97(2003)
Standard Test Methods for Coated and Laminated Fabrics for Architectural Use
volume 07.02
ASTM D4852-88(2000)
Standard Practice for Evaluation of Attached Upholstery Fabrics
volume 07.02
ASTM D4853-97(2002)
Standard Guide for Reducing Test Variability
volume 07.02
ASTM D4854-95(2001)
Standard Guide for Estimating the Magnitude of Variability from Expected Sources in Sampling Plans
volume 07.02
ASTM D4855-97(2002)
Standard Practice for Comparing Test Methods
volume 07.02
ASTM D4856-99(2004)
Standard Test Method for Determination of Sulfuric Acid Mist in the Workplace Atmosphere (Ion
Chromatographic)
volume 11.03
ASTM D4857-03
Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston
Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
volume 05.02
ASTM D4858-02
Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in TwoStroke-Cycle Gasoline Engines
volume 05.02
ASTM D4859-97(2003)
Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC
volume 05.02
ASTM D4860-91(2005)
Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright
Numerical Rating)
volume 05.02
ASTM D4861-05
Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated
Biphenyls in Air
volume 11.03
ASTM D4863-02
Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
volume 05.02
ASTM D4864-90(2005)
Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas
Chromatography
volume 05.02
ASTM D4865-98(2003)e1
Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
volume 05.02
ASTM D4866-88(2003)e1
Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations
Containing Mineral Aggregates and Optional Polymeric Admixtures
volume 04.04
ASTM D4867/D4867M-04
Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
volume 04.03
Systems
ASTM D4868-00(2005)
Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
volume 05.02
ASTM D4869-05
Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing
volume 04.04
ASTM D4870-04
Standard Test Method for Determination of Total Sediment in Residual Fuels
volume 05.02
ASTM D4871-00
Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
volume 05.02
ASTM D4872-99(2004)e1
Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds
volume 10.02
ASTM D4873-02
Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples
volume 04.13
Geosynthetics
ASTM D4874-95(2006)
Standard Test Method for Leaching Solid Material in a Column Apparatus
volume 11.04
Waste Management
ASTM D4875-05
Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide
Content of Polyether Polyols
volume 08.02
ASTM D4877-04
Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates
volume 08.02
ASTM D4878-03
Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
volume 08.02
Strona 126
ASTM D4879-02
Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock
volume 04.08
ASTM D4880-03
Standard Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire
volume 10.02
ASTM D4881-05
Standard Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire
volume 10.02
ASTM D4882-05
Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
volume 10.02
ASTM D4883-03
Standard Test Method for Density of Polyethylene by the Ultrasound Technique
volume 08.02
ASTM D4884-96(2003)
Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
volume 04.13
Geosynthetics
ASTM D4885-01
Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile
Method
volume 04.13
Geosynthetics
ASTM D4886-88(2002)
Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)
volume 04.13
Geosynthetics
ASTM D4887-99(2003)
Standard Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials
volume 04.03
Systems
ASTM D4888-06
Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
volume 05.06
ASTM D4889-04
Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified
Isocyanates
volume 08.02
ASTM D4890-98(2003)
Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of
Polyols
volume 08.02
ASTM D4891-89(2006)
Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
volume 05.06
ASTM D4892-89(2004)
Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
volume 05.02
ASTM D4893-94(2004)
Standard Test Method for Determination of Pitch Volatility
volume 05.02
ASTM D4894-04
Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
volume 08.02
ASTM D4895-04
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
volume 08.02
ASTM D4896-01
Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
volume 15.06
Adhesives
ASTM D4897-01
Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
volume 04.04
ASTM D4898-90(2005)
Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
volume 05.02
ASTM D4899-99(2004)
Standard Practice for Analysis of Vegetable Tanning Materials-General
volume 15.04
ASTM D4900-99(2004)
Standard Test Method for Lignosulfonates (Sulfite Cellulose) in Tanning Extracts
volume 15.04
ASTM D4901-99(2004)
Standard Practice for Preparation of Solution of Liquid Vegetable Tannin Extracts
volume 15.04
ASTM D4902-99(2004)
Standard Test Method for Evaporation and Drying of Analytical Solutions
volume 15.04
ASTM D4903-99(2004)
Standard Test Method for Total Solids and Water in Vegetable Tanning Material Extracts
volume 15.04
ASTM D4904-99(2004)
Standard Practice for Preparation of Solution of Liquid Vegetable Tannin Extracts
volume 15.04
ASTM D4905-99(2004)
Standard Practice for Preparation of Solution of Solid, Pasty and Powdered Vegetable Tannin Extracts
volume 15.04
ASTM D4906-95(2001)
Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
volume 15.04
ASTM D4907-00(2005)
Standard Test Method for Nitrocellulose in Finish on Leather
volume 15.04
ASTM D4910-02
Standard Tables of Body Measurements for Infants, Sizes 0 to 24
volume 07.02
ASTM D4912-02
Standard Test Method for Fabric Stability of Vinyl-Coated Glass Yarn Insect Screening and Louver Cloth
volume 07.02
ASTM D4913-00(2005)e1
Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain,
Visual Chemical Detectors
volume 11.03
ASTM D4914-99
Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
volume 04.08
ASTM D4916-04
Standard Practice for Mechanical Auger Sampling
volume 05.06
ASTM D4917-97(2002)
Standard Test Method for Coefficient of Static and Kinetic Friction of Uncoated Writing and Printing Paper by
Use of the Horizontal Plane Method
volume 15.09
ASTM D4918-97(2002)
Standard Test Method for Coefficient of Static Friction of Uncoated Writing and Printing Paper by Use of the
Inclined Plane Method
volume 15.09
ASTM D4919-03
Standard Specification for Testing of Hazardous Materials Packagings
volume 15.09
ASTM D4920-98(2003)
Standard Terminology Relating to Moisture in Textiles
volume 07.02
ASTM D4921-95(2006)
Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature
volume 15.05
ASTM D4922-01
Standard Test Method for Determination of Radioactive Iron in Water
volume 11.02
Water (II)
ASTM D4923-01
Standard Specification for Reinforced Thermosetting Plastic Poles
volume 08.02
ASTM D4924-89(2005)
Standard Classification for Petroleum Waxes for Use in Rubber Compounding
volume 09.01
ASTM D4926-89(2001)
Standard Test Method for Gamma Alumina Content in Catalysts Containing Silica and Alumina by X-Ray
Powder Diffraction
volume 05.05
ASTM D4927-05
Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium,
Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
volume 05.02
ASTM D4928-00(2005)
Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
volume 05.02
ASTM D4929-04
Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
volume 05.02
ASTM D4930-94(2004)e1
Standard Test Method for Dust Control Material on Calcined Petroleum Coke
volume 05.02
ASTM D4931-92(2002)
Standard Test Method for Gross Moisture in Green Petroleum Coke
volume 05.02
ASTM D4932-89(2000)e1
Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll
Roofing, and Shingles
volume 04.04
ASTM D4933-99(2004)
Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials
volume 04.10
Wood
Strona 127
ASTM D4934-02
Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—
Insolubles
volume 09.01
ASTM D4936-05
Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration
volume 09.01
ASTM D4937-96(2006)e1
Standard Test Method forp-Phenylenediamine Antidegradants Purity by Gas Chromatography
volume 09.01
ASTM D4938-89(2002)
Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water
volume 06.02
ASTM D4939-89(2003)
Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in
Natural Seawater
volume 06.02
ASTM D4940-98(2003)
Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting
Abrasives
volume 06.02
ASTM D4941-89(2004)
Standard Practice for Preparing Drawdowns of Artists' Paste Paints
volume 06.02
ASTM D4942-89(2001)
Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer
volume 06.02
ASTM D4943-02
Standard Test Method for Shrinkage Factors of Soils by the Wax Method
volume 04.08
ASTM D4944-04
Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide
Gas Pressure Tester
volume 04.08
ASTM D4945-00
Standard Test Method for High-Strain Dynamic Testing of Piles
volume 04.08
ASTM D4946-89(2003)
Standard Test Method for Blocking Resistance of Architectural Paints
volume 06.02
ASTM D4947-05
Standard Test Method for Chlordane and Heptachlor Residues in Indoor Air
volume 11.03
ASTM D4948-89(2000)e1
Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid
volume 06.01
ASTM D4949-94(2002)
Standard Test Method for Determination of D-C Resistivity of Writing Paper (Keithley Method)
volume 15.09
ASTM D4950-01(2004)e1
Standard Classification and Specification of Automotive Service Greases
volume 05.02
ASTM D4951-02
Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled
Plasma Atomic Emission Spectrometry
volume 05.02
ASTM D4952-02
Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
volume 05.02
ASTM D4953-99a
Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
volume 05.02
ASTM D4954-89(2003)
Standard Test Method for Determination of Nitrilotriacetates in Detergents
volume 15.04
ASTM D4955-89(2002)
Standard Practice for Field Evaluation of Automotive Polish
volume 15.04
ASTM D4956-05
Standard Specification for Retroreflective Sheeting for Traffic Control
volume 04.03
Systems
ASTM D4958-97(2004)
Standard Test Method for Comparison of the Brush Drag of Latex Paints
volume 06.02
ASTM D4959-00
Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating
volume 04.08
ASTM D4960-89(1998)
Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials
volume 06.02
ASTM D4962-02
Standard Practice for NaI(Tl) Gamma-Ray Spectrometry of Water
volume 11.02
Water (II)
ASTM D4963-04
Standard Test Method for Ignition Loss of Glass Strands and Fabrics
volume 07.02
ASTM D4964-96(2004)
Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type
Tensile Testing Machine)
volume 07.02
ASTM D4965-96(2002)
Standard Terminology of Seams and Seam Finishes in Home Sewing
volume 07.02
ASTM D4966-98(2004)
Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
volume 07.02
ASTM D4967-99(2004)e1
Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in
Fiber-Optic Cables
volume 10.02
ASTM D4968-06
Standard Guide for Annual Review of Test Methods and Specifications for Plastics
volume 08.02
ASTM D4969-02
Standard Specification for Polytetrafluoroethylene—(PTFE) Coated Glass Fabric
volume 08.02
ASTM D4970-05
Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textiles Fabrics
(Martindale Pressure Tester Method)
volume 07.02
ASTM D4971-02
Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Using the Diametrically
Loaded 76-mm (3-in.) Borehole Jack
volume 04.08
ASTM D4972-01
Standard Test Method for pH of Soils
volume 04.08
ASTM D4974-04
Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
volume 07.02
ASTM D4975-04
Standard Test Methods for Single-Filament Tire Bead Wire Made from Steel
volume 07.02
ASTM D4976-04a
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
volume 08.02
ASTM D4977-03
Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
volume 04.04
ASTM D4978-95(2001)
Standard Test Methods for Screening of Reactive Sulfides in Waste
volume 11.04
Waste Management
ASTM D4979-95(2003)
Standard Test Method for Physical Description Screening Analysis in Waste
volume 11.04
Waste Management
ASTM D4980-89(2003)
Standard Test Methods for Screening of pH in Waste
volume 11.04
Waste Management
ASTM D4981-95(2003)
Standard Test Method for Screening of Oxidizers in Waste
volume 11.04
Waste Management
ASTM D4982-95(2001)
Standard Test Methods for Flammability Potential Screening Analysis of Waste
volume 11.04
Waste Management
ASTM D4984-06
Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
volume 05.06
ASTM D4985-05
Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines
Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
volume 15.05
ASTM D4986-03
Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
volume 08.02
ASTM D4987-99(2003)
Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper
volume 15.09
ASTM D4988-96(2001)
Standard Test Method for Determination of Alkalinity of Paper as Calcium Carbonate (Alkaline Reserve of
Paper)
volume 15.09
ASTM D4989-90a(2004)
Standard Test Method for the Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate
Plastometer
volume 04.04
Strona 128
ASTM D4990-97a(2005)e1
Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing
volume 04.04
ASTM D4991-94(1999)
Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
volume 15.09
ASTM D4992-94(2001)
Standard Practice for Evaluation of Rock to be Used for Erosion Control
volume 04.08
ASTM D4993-89(2003)
Standard Practice for Calculation and Adjustment of Silica (SiO2) Scaling for Reverse Osmosis
volume 11.02
Water (II)
ASTM D4994-89(2002)
Standard Practice for Recovery of Viruses from Wastewater Sludges
volume 11.02
Water (II)
ASTM D4995-04
Standard Specifications for Electronic and Degreasing Grades of 1,1,2-Trichloro 1,2,2,-Trifluoroethane
Solvent
volume 15.05
ASTM D4998-95(2003)e1
Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
volume 05.02
ASTM D5000-05
Standard Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor
volume 05.02
ASTM D5001-03
Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder
Lubricity Evaluator (BOCLE)
volume 05.02
ASTM D5002-99(2005)
Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
volume 05.02
ASTM D5003-95(2005)
Standard Test Method for The Hardgrove Grindability Index (HGI) of Petroleum Coke
volume 05.02
ASTM D5004-89(2004)e1
Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
volume 05.02
ASTM D5006-03
Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
volume 05.02
ASTM D5007-99(2003)
Standard Test Method for Wet-to-Dry Hiding Change
volume 06.02
ASTM D5008-01
Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas
Chromatography
volume 06.04
ASTM D5009-02(2005)
Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under
Laboratory Conditions
volume 06.02
ASTM D5010-05
Standard Guide for Testing Printing Inks and Related Materials
volume 06.02
ASTM D5011-92(2003)
Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
volume 11.03
ASTM D5012-01
Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet
Deposition
volume 11.03
ASTM D5013-89(2003)
Standard Practices for Sampling Wastes from Pipes and Other Point Discharges
volume 11.04
Waste Management
ASTM D5015-02
Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
volume 11.03
ASTM D5016-03
Standard Test Method for Sulfur in Ash from Coal, Coke, and Residues from Coal Combustion Using HighTemperature Tube Furnace Combustion Method with Infrared Absorption
volume 05.06
ASTM D5017-96(2003)e1
Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by
Carbon-13 Nuclear Magnetic Resonance
volume 08.02
ASTM D5018-89(2004)
Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
volume 05.02
ASTM D5019-05
Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof
Membrane
volume 04.04
ASTM D5021-00
Standard Specification for Thermoplastic Elastomer-Chlorinated Ethylene Alloy (TECEA)
volume 08.02
ASTM D5022-95(2001)
Standard Specification for Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs
to be Diluted Before Use
volume 15.09
ASTM D5023-01
Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
volume 08.02
ASTM D5024-01
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
volume 08.02
ASTM D5025-05
Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
volume 08.02
ASTM D5026-01
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
volume 08.02
ASTM D5028-96(2003)
Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
volume 08.02
ASTM D5029-98(2004)
Standard Test Method for Water Solubles in Activated Carbon
volume 15.01
Ceramics
ASTM D5030-04
Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
volume 04.08
ASTM D5031-01
Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
volume 06.01
ASTM D5032-97(2003)
Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
volume 10.02
ASTM D5033-00
Standard Guide for Development of ASTM Standards Relating to Recycling and Use of Recycled Plastics
volume 08.02
ASTM D5034-95(2001)
Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
volume 07.02
ASTM D5035-06
Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
volume 07.02
ASTM D5036-99(2005)
Standard Practice for Application of Adhered Poly(Vinyl Chloride) Sheet Roofing
volume 04.04
ASTM D5038-01
Standard Terminology of Textile Conservation
volume 07.02
ASTM D5039-97(2002)
Standard Test Methods for Identification of Wire Side of Paper
volume 15.09
ASTM D5040-90(2005)
Standard Test Methods for Ash Content of Adhesives
volume 15.06
Adhesives
ASTM D5041-98(2004)
Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
volume 15.06
Adhesives
ASTM D5042-90(2004)e1
Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins
volume 11.02
Water (II)
ASTM D5043-04
Standard Practice for Field Identification of Coatings
volume 06.02
ASTM D5044-02
Standard Test Method for Rubber Chemicals-Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide
(MBTS)
volume 09.01
ASTM D5045-99
Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic
Materials
volume 08.02
ASTM D5047-05
Standard Specification for Polyethylene Terephthalate Film and Sheeting
volume 08.02
ASTM D5048-03
Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to BurnThrough of Solid Plastics Using 125-mm Flame
volume 08.02
ASTM D5050-96(2002)
Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts
volume 11.04
Waste Management
Strona 129
ASTM D5051-02

nr normy ASTM A1-00(2005) ASTM A2-02 ASTM A3

Transcription

Similar documents

A Guide for Importing Medical Equipment into Brazil