AMS Technologies AG Firmenpräsentation

AMS Technologies AG Firmenpräsentation

Company Presentation
Thermal Management
Where Technologies Meet Solutions
AMS Technologies
2
Capabilities for tailored solutions
Tell us your specific requirements, we will provide your custom solution
The data presented below are intended to open a technical dialogue leading to the
development of a solution.
AMS Technologies’ products are used worldwide in medical and industrial lasers,
semiconductor manufacturing, power cabinets, telecommunications, machine tools and a
wide variety of demanding electronics applications.
Benefit from a custom solution :




Exclusive design
Integrated system meeting your machine requirement
Increasing performances in a defined size/format
One supplier for the complete cooling loop: all technical parameters are taken into
consideration = guaranteed performances
AMS Technologies
3
Technical expertise
Thermal managments : TEC cooling/heating, Compressor cycle system,
combined TEC/AIR/WATER assemblies, etc…
Your French Team :
•
•
•
•
1 thermal senior engineer
1 application engineer
1 technicien / customer service
1 engineer trainee
Typical project flow :
•
•
•
•
•
Study (Thermal balance, calculation, choice of components and achitecture)
Simulation
CAD design
Prototyping
Series production
AMS Technologies
4
Technologies
TEC Assembly
Cold plate
Heat exchanger
Chiller
Microcompressor
AMS Technologies
5
Technologies : Peltier (TEC)
- Custom Ceramics dimentions
- Wire length adaptation
AMS Technologies
6
Technologies : Heatsink
AMS Technologies
7
Technologies : Cold plate
- Friction malaxage
- High fluid pressure resistance
- Tube design
Custom Cold Plates for Electric car
AMS Technologies
8
Technologies : Heat Exchanger
AMS Technologies
9
Technologies : AIR/AIR Exchanger
TEC assembly, heatsink and fans
– Cooling capacity : 100 W
– Inbox T° : 40°C max
– Operating T° : 70°C external
Test report
AMS Technologies
10
Technologies : Chiller
Our design
AMS Technologies
11
Technologies : Microcompressor 1/2
- Heat load 600 W
- Inside target T° 40°C (32° demonstrated)
- Outside T° range -25°C to + 55°C
- 17 Kg
AMS Technologies
12
Technologies : Microcompressor 2/2
From concept to reality
AMS Technologies
13
Applications
High Power
Electonics
14
Healthcare
and Medical
AMS Customer Presentation
|
Industrial
Applications
Optical
Technologies
Space and
Avionics
www.amstechnologies.com
AMS Technologies
14
Applications : Medical
•
Reagent cooling
•
Cabinet cooling
AMS Technologies
15
Applications : Optics 1/2
•
Component, systems and racks
•
TEC
•
Heatsink
•
Chiller / Microcompressor
•
Cold plate
AMS Technologies
16
Applications : Optics 2/2
•
Laser diode burn in test bench
– 976 nm 500 W @+/- 0,1 °C
Image courtesy of Thales Group
•
Research experiment
– 888 nm 50W @ +/- 0,1 °C
AMS Technologies
17
Applications : Industrial
Cabinet cooling
- Heat load 2000 W
- Inside target T° 50°C (43°C demonstrated)
- Outside T° range -25°C to + 70°C
- 60 Kg
AMS Technologies
18
Applications : Industrial
Turbochargers air coolers (intercoolers)
600 x 400 x 250 mm 92 Kg
AMS Technologies
19
Applications : Industrial
LIDAR cooling
•
Concept and Feasibility
Studies
Air suction
Recovery
air
Water out
Air blowing
Water in
AMS Technologies
20
Applications : High Power Electronics
IGBT
AMS Technologies
21
Sales offices in Europe
 Germany
 Nordic
AMS Technologies AG
Martinsried/Munich
Phone: +49(0)89 895 77-0
[email protected]
AMS Technologies Nordic
Azpect Photonics AB
Mölndal / Sweden
Phone + 46 (0)8 55 44 24 80
[email protected]
 UK
 Spain
AMS Technologies Ltd.
Lutterworth
Phone: +44 (0)1455 556360
[email protected]
AMS Technologies Spain S.L.
Barcelona
Phone: +34 93 380 8420
[email protected]
 Italy
 France
AMS Technologies S.r.l.
Legnano (Milan)
Phone: +39 0331 596 693
[email protected]
AMS Technologies S.A.R.L.
LES ULIS Cedex
Phone: +33 (0)1 64 86 46 00
[email protected]
AMS Technologies
22