Handbook for Motorola MC -Micro Series Micro Series Micro Series

Transcription

Handbook for Motorola MC -Micro Series Micro Series Micro Series
Handbook
for
Motorola
MCMC-Micro Series
MCMC-Micro
MCMC-Micro TRC
MCMC-Micro MPT1237
MCMC-Compact
MCMC-Centro
Radius M110
Storno 5500
Field Programmer
Created by
Servicetools.org
This are Scans from PX4 Handbook, but PC Software is most identicel.
Non interest sites are removed or changed.
Changed for PC Software
3. Installation:
First: The ansi.sys must be installed in Config.sys , all software runs only from pure DOS.
Copy ansi.sys to c:\
Edit Config.sys and ad this on the end: device=c:\ansi.sys *** Restart PC !!! ***
Ansi.sys useally in DOS folder, when not, just search in google for this.
Copy MC-Micro soft in your desiried folder.
Run Motorola.com / Storno.com and select the right Modul:
Modul:
mcev9.chn
mcev9r.chn
mcev9m.chn
mcez9.chn
mcez9r.chn
mcez9m.chn
mcez13.chn
mcez13r.chn
mcez13m.chn
mcevm13.chn
mcevm13m.chn
mccentr.chn
mccentrm.chn
cqmev9.chn
cqmez9.chn
cqmez13.chn
For Model:
MC-Micro EVA 9, Select 5
MC-Micro EVA 9, Select 5
MC-Micro EVA 9, Select 5
MC-Micro EZA 9, Select 5
MC-Micro EZA 9, Select 5
MC-Micro EZA 9, Select 5
MC-Micro EZA 1/3, CSQ/PL
MC-Micro EZA 1/3, CSQ/PL
MC-Micro EZA 1/3, CSQ/PL
MC-Micro TRC, MC-Compact
MC-Micro TRC, MC-Compact
MC-Centro
MC-Centro
CQM5500 EVA 9, Select 5
CQM5500 EZA 9, Select 5
CQM5500 EZA 1/3, CSQ/OL
Remarks:
Standardversion
Repairversion ( Create new EEPROM )
Masterversion ( Few more Options )
Standardversion
Repairversion ( Create new EEPROM )
Masterversion ( Few more Options )
Standardversion
Repairversion ( Create new EEPROM )
Masterversion ( Few more Options )
Standardversion
Masterversion ( Few more Options )
Standardversion
Masterversion ( Few more Options )
Storno Version
Storno Version
Storno Version
The software is from 1985, you need a old PC
386SX or lower without FIFO RS232 Port or
you can use the DOS Box Emulater
The MC-Micro MPT1237 ( Bündelfunk ) use own soft, but I don‘t know which one !
The Radius M110 use a own soft, much more comfortable like the GP300 or MX100 software.
The Copyright on the Original Manual is by Motorola !
This Copy is only for education or non profit using for Radio Amatuers.
All Programming Software are under Copyright from Motorola !!!
Repair Vesion has Initialization Menu here as 4. Point
In PC Software press Control - C to return to
Loader Menu.
For return to DOS press F10
Make sure you have transfered all Data to Radio
The Soft don‘t store it !
Removed, is not availble in PC Software
If still not work, use Repair Versions Initialization Menu to create new corect EEPROM Data
and try to write it to Radio, if still not work, replace EEPROM by 24C01.
Warning !!! , faster PC as 386SX can gets this Error too, first try slower PC.