LT500 — Standard Fixed Thoracic Lateral Hardware

LT500
Pad included w/ part # LT500. Specify pad size upon ordering
Standard Configuration
— Standard Fixed Thoracic Lateral Hardware
TECHNICAL DATA
1.
5/32 tool for 1/4– 20 button head screws.(Pad Mounts, Mounting Hardware)
2.
Includes two 1/4-20 x 3/4” and two 1/4-20 x 5/8” button head screws.
The LT500 Includes:
1.
SELLING POINTS
Standard medium profile fixed “L”
Bracket with flush pad mounting.
Pad Mounting
LT500-R
LT500-L
1.
Heavy duty fixed hardware is sturdy and reliable.
2.
Smooth finished edging on every piece.
3.
Available in a variety of flush mounts, offsets, reverse offsets and mounting hardware.
HOLE/SLOT SPACING
LT500
Mounting to chair
The LT500 Standard Configuration includes a
flush medium profile fixed bracket, see back for
offsets, reverse offsets and alternate mounting
hardware
LT500
The LT500 is a standard heavy duty fixed thoracic lateral bracket . The standard configuration comes
with a medium profile flush “L” Bracket for mounting to a flat back. A variety of different sized flush pad
mounts, offsets, reverse offsets and mounting hardware are available to get any configuration you need.
Standard LT500 “L” brackets have1” slot spacing.
ALTERNATE CONFIGURATION DIMENSIONS
STANDARD CONFIGURATION DIMENSIONS(MEDIUM PROFILE)
Flush High Profile fixed bracket
Use these standard dimensions to determine which
modifications you will need. See back for offsets or
different mounting hardware .
Pad Mounting
6”
Mounting to Chair
3.75”
LHW-102
Flush Low Profile fixed bracket
Pad Mounting
7”
Mounting to Chair
3.75”
Pad Mounting
5”
Mounting to Chair
3.75”
LHW-100
SP-Dashboard • 1
LT500 Modifications
Offsets
Low Profile
Offset Configuration
Offsets can be added to accommodate
hip width for growth in the seat.
1” Offset
2” Offset
3” Offset
LHW-104
LHW-108
LHW-112
Example Configuration
3” Offset
The standard measurement for an offset is
as shown below (Standard profile with 3”
offset) remember to compensate for pad
thickness as well (approximately 1 inch).
LHW-112
1”
LT500
This example configurations is shown
with a 1 inch offset, high profile
bracket with track mounting hardware
3”
Medium Profile
1” Offset
2” Offset
3” Offset
LHW-105
LHW-109
LHW-113
Track Mounting Hardware
A variety of tracks are also available to mount to
the seat pan for additional adjustability (fore/aft).
Standard 7” Track
High Profile
1” Offset
2” Offset
3” Offset
2” Track — SBHD-234
LHW-106
LHW-110
LHW-114
3” Track — SBHD-235
6”” Track — SBHD-233
7” Track — SBHD231
8” Track — SBHD-236
1” Reverse Offsets
Anti-Rotation Nuts
Anti Rotation nuts can be added to the pad mounting
or the seat pan mounting area to prevent rotation of
the hardware at the screws.
10” Track — SBHD-140
LHW-116
LHW-117
LHW-118
12” Track” — SBHD-232
14” Track — SBHD-237
LHW-145
16” Track — SBHD-238
Low Profile
Medium Profile
High Profile
18” Track — SBHD-239
800-965-9229 • www.stealthproducts.com • 104 John Kelly DR. Burnet, TX 78611
SP-Dashboard • 2