Walter Titex uFl X·treme Performance line – the new - FMS

_ HSS DRILLS
Walter Titex UFL X·treme Performance
Line – the new coated UFL series for
increased tool life.
Walter Titex UFL –
always the first choice for drilling professionals
Specialists in metal cutting know that when you want to drill
productive and precise holes you turn to the tried-and-tested
Walter Titex UFL technology. The special flute profile, the 40°
helix angle and the U form tip geometry guarantee good chip
clearance, considerable tool stability, excellent chip removal
properties and controlled chip breaking.
Walter Titex UFL X·treme Performance Line –
the latest development in drilling
The first HSS drill in the world with an aluminium-chromenitrate based multilayer coating (XPl) is a true market leader
in terms of performance and tool life. The copper coloured
AlCrN-based coating with the multilayer structure guarantees
extreme toughness and very high wear resistance, which results
in vastly improved tool life.
New
A new tool-life miracle from our UFL
series drills with power coating
UFL point form U
New AlCrN-based coating
for maximum productivity
and tool life
UFL profile 40° spiral
Special UFL flute profile
The tool
–– special flute profile
–– helix angle from 40°
–– U form point geometry
–– excellent chip clearance
–– high tool strength
–– excellent chip removal properties
–– controlled chip breaking
–– considerable increase in output and tool life due
to unique multilayer coating with its aluminiumchrome nitrite basis (XPL)
–– high rigidity
The application
–– steel (500 – 1300 N/mm²)
–– cast iron (GG, GGG)
–– aluminium wrought and cast alloys
–– copper and copper alloys
Cutting tool material: HSS-E (5 % Co)
high temperature resistance
Your advantages
–– can be used universally
–– attractive price / performance ratio
–– very high tool life and productivity
UFL
Types: A1149XPL, A1249XPL,
3 and 5 x d, Ø 1–20 mm
depending on type
Walter Titex – Drilling
25