Mini Bowdabra®

Transcription

Mini Bowdabra®

1
2
3
Create
Bows Easily
in
Minutes!
Chapter 1: Helpful Hints
Chapter 3: Pinwheel Bows

Ribbon Cutting Formulas

Pinwheel Bow Points of Interest

Loop Chart

Pinwheel Bow 

Quick Reference Chart for Ribbon Length

Pinwheel Bow Extra Wide Ribbon 

Sealing Ribbon

Pinwheel Bow Stacked  

Additional Tips

Pinwheel Bow 2-Tone 

Finishing Ribbon Ends

Pinwheel Bow One-Sided Ribbon 

Making Creases

Quad Loop Pinwheel Bow 

Pinwheel & Quad Loop Stacked  

Quad Loop Pinwheel One-Sided Ribbon 
Chapter 2: Basic Bows

Basic Bow Points of Interest

Basic Bow with 2” Tails 

Basic Bow Tails Up & Tails Down 

Basic Bow 6 Loops 

Boutique Bow Points of Interest

Basic Bow X-Long Tails One-Sided Ribbon 

Boutique Bow 

Basic Bow 6 Loops Double Stacked 

Twisted Boutique Bow  

Basic Bow 8 Loops One-Sided Ribbon 

Boutique Bow w/ Dove-Tails 

Boutique Bow w/ Dove-Tails Pinwheel Stacked 

Boutique Bow & Basic Bow Stacked 

Boutique Bow w/Dovetails Twisted Boutique Bow
Chapter 4: Boutique Bows
Stacked 

Boutique Bow w/Dove-Tails Up & Down 
2
Chapter 5: Bow Ties & Loopy Bows
Chapter 7: Baby Bows

Bow Tie & Loopy Bows Points of Interest

Baby Bows Points of Interest

Bow Tie 

Baby Basic Bow (one-sided) 

Twisted Bow Tie 

Baby Boutique Bow 

Twisted Bow Figure 8 

Baby Pinwheel 

Loopy Bow 

Baby Pinwheel Stacked 

Multi-Colored Loopy Bow 

Baby Quad Pinwheel 

Twisted Bow Figure 8’s Stacked 
Bow Tie & Twisted Figure 8’s Stacked 

Baby Quad Pinwheel One-Sided 

Stacked Loopy Bows 

Baby Butterfly 


Loopy Bow Up & Down Stacked
Chapter 6: Spiky Bows
Chapter 8: Pet Bows

Spiky Bow Points of Interest

Pet Bow Points of Interest

Spiky Bow 

Boutique Bow Stacked Loopy Bow w/ Jingle Bell

Spiky Bow & Pinwheel Stacked 

Spiky Bow & Boutique Bow w/Dove-Tails
Stacked 

Spiky Bow & Bow Tie Stacked 

Spiky Bow One Up , One Down 
Attached 

Basic Bow w/ Dovetails and Spray 

Meow Spiky Bow 

“Puppy Love” Pinwheel Stacked with Spray 
3
Chapter 9: Themed Bows
Chapter 10: Stacked Sports Bows

Themed Bow Points of Interest

Stacked Sport Bow Points of Interest

Butterfly 1 

Cheerleader 

Butterfly 2 

Soccer 

Dragonfly 

Football 

Flower 

Baseball 

Flower with Leaves 

Basketball 

Butterfly on Flower 

Patriotic 

School Days 

Halloween 

Holiday 

Birthday 

Chapter 11: Beaded Bows

Bead Bows Points of Interest

Loopy Bead Bow 

Basic Bow 6 Loops Beaded Tails 
Valentine’s Day 

Spiky Bead Bow 

Best Friends 

Beaded Bow 

Princess Bow 

Boutique Bow with Beaded Sprays 
4
Chapter 12: Finishing Touches
Chapter 13: Resources

Finishing Touches Points of Interest

Bowdabra “Bow Maker, Favor Maker, & Craft Tool”

Alligator Clips

Morex Corp “The More Exclusive Ribbon Company”

Alligator Clips with Ribbon Ends

Morex Ribbon 1

Elastic Hair Bands

Morex Ribbon 2

Plastic Barrette

Morex Ribbon 3

French Clip

Mini Bowdabra Hair Bow Tool & Ruler

Snap Clip

Basic Finishing Ribbons

Finishing Knots

Finishing Beads

Finishing Buttons

Finishing Ribbon Sprays
5
Glossary of
Terms
Ribbon
Cutting
Formula
Quick
Reference
Chart
Making
Creases
Finishing
Ribbon Ends
Sealing
Ribbon Ends
Frequently
Asked
Questions
Width of the Bow – Total length of the bow from one side to the other.
Fluff Factor- Also known as Total Parameter, can vary depending on bow style and the type of
ribbon you are using. The fluff usually ranges from .25” to 2”. When using sheer or thin width
ribbon the fluff factor is usually on the lower end. While with the satin and grosgrain large width
ribbon the fluff factor is higher. Also, the more loops the bow has the higher the fluff factor will
be.
- Minimum Difficulty Only takes one strand of ribbon to make.
 - Average Difficulty Requires more than one strand of ribbon.
 - Higher Difficulty Requires the making of several bows stacked on top of each other.
Crease – The folding of ribbon prior to setting it into the Mini Bowdabra®
Mountain Up- Pinch the sides of the ribbon and push the center “up”.
Mountain Down- Pinch the sides of the ribbon in and push center “down”.
Spray- Strands of ribbon placed inside and along the top of a bow.
7
(Standard) Basic Bow Formula:
Width of the Bow X (Number of Loops +Fluff Factor) +2(Length of each tail)
*Fluff Factor for Basic Bow is usually 1, 1.5, or 2 depending on width of the ribbon used and style
of the ribbon.
Pinwheel Formula:
Width of the Bow X (Number of Loops +Fluff Factor) +2(Length of each tail)
*Fluff Factor for a Pinwheel Bow is usually .5
Boutique Bow Formula:
Width of the Bow X (Number of Loops) + 2”
Boutique Bow w/Tails Formula:
Width of the Bow X (Number of Loops) + 2(Length of each tail) + 2”
Twisted Boutique Bow Formula
Bow Tie Formula:
Twisted Bow Tie Formula:
Butterfly Formula:
Width of the Bottom (2.5) + Width of the Top (2.5)
8
Desired Bow Width
Width
3” Wide Bow
1.5” on each side
4” Wide Bow
2” on each side
5” Wide Bow
2.5 on each side
Quick Reference Ribbon Length Chart (inches)
3” Wide
4” Wide
5” Wide
6” Wide
Basic Bow (4 Loops 2” Tails)
22”
28”
34”
40”
28”
36”
44”
52”
34”
44”
54”
64”
10.5”
14”
17.5”
21”
Quad Loop Pinwheel Bow
18”
24”
30”
36”
Boutique Bow
14”
18”
22”
26”
Twisted Boutique Bow
18”
23”
28”
33”
Boutique Bow w/ 2” Tails
18”
22”
26”
30”
Bow Tie
8”
10”
12”
14”
Twisted Bow Tie
9”
11”
13”
15”
Type
Pinwheel Bow
9
When making ribbon creases prior to setting them into the Mini
Bowdabra Tower there are two separate types; “Mountain Up” and
“Mountain Down”.
A “Mountain Down” crease is used when first
beginning your bow. To make the crease
pinch sides in and push center down. Place
the “Mountain Down” crease into the Mini
Bowdabra.
When making your bow loops pinch ribbon
sides and push the center up. Press
“Mountain Up” crease into the center of the
Mini Bowdabra.
10
Diagonal Cut:
Position your scissors at an angle and cut
the ribbon in a slant.
Dove-Tail:
Dovetail both ends: fold the ribbon in half
lengthwise. Position your scissors at the
folded edge of the ribbon and cut the end
at a 45° angle. Unfold your ribbon and you
have a professional, finished look to your
ribbon tails.
11
 Bowdabra® recommends using clear nail polish to seal the
ends of ribbon and prevent fraying. Clear nail polish dries
quickly and allows all ages to participate in bow making, safely.
 A fray blocker can also be used at the end of ribbons and is
available at any local craft store.
 Placing the ends of the ribbon over the flame of a lighter can
also seal the ribbon. However, extreme caution should be used!
The flame can darken ribbon or even set the ribbon on fire.
 Another alternative for sealing ribbon is using a wood burning
tool. Many professional bow makers choose to use a wood burning
tool.
12
 Can I use any type of ribbon when making hair bows? All hair bow directions can be used
with any style ribbon (organza, grosgrain, and stain).
 What is the best way to navigate through this e-book? Start by doing a quick glance over
all this book has to offer. When choosing your bows start with some of the easier (one ) bows
and gradually work your way to some of the harder bows as you gain experience. After finishing
your bow follow instructions for adding hair bow hardware and then a finishing ribbon
(instructions located in Chapter 12).
 How do I know which hair bow should be attached to which hair bow clip? Experiment
with different hair bow clips to determine which one is best for your application. It has less to
do with the style of the bow and more to do with the type of hair the bow is going into.
 Do I have to use Bowdabra Bow Wire? Bowdabra Bow Wire is essential for making these
hair bows. The design of the Bowdabra Bow Wire holds everything together tightly and makes for
a long lasting sturdy hair bow. Bowdabra Bow Wire and Bowdabra Products can be found on the
shelves of Michaels, A.C. Moore, Hancock Fabrics, Joann Fabrics, Pat Catan’s, & Walmart.
 Can I use the Hair Bow Formula with inches and centimeters? YES, the formulas work
with either inches or centimeters.
 How do I keep my stacked bows tight one on top of the other? After you have tied the
bows one on top of the other. Twist each individual bow clockwise to pull the Bowdabra Bow
Wire tightly.
 Why do my hair bows not look like the ones in the picture? It is important to not skip
any steps. Remember to always scrunch down the bow with your Mini Bowdabra Bow Wand, as
well as pull your Bowdabra Bow Wire tightly while the bow is still inside the Mini Bowdabra. And
always remember to fluff and shape your bow when you are done!
 How do I keep my hair bows shape? Once bow is made and shaped spray your bow with a
regular starch according to the manufacture’s directions. Let the bow dry for 1 – 2 minutes
before using.
 What is the best way to store my hair bows? The best way to store hair bows is to make
a hair bow holder . A hair bow holder keeps bows from getting crushed and /or misshapen in
storage.
 How do I keep my hair bows in fine hair? To prevent hair bows from slipping out of fine
hair; glue on the top-underneath of hair clips small strips of latex free (in case of allergies) shelf
lining.
13
Basic Bow 2” Tails 
Basic Bow 2” Tails
Tails UP & Tails Down

6 Loops 
Basic Bow Extra Long
Tails One-Sided Ribbon

Double Stacked 
Basic Bow 2” Tails 8
Loops One-Sided 
Bow Type
3” Wide 4” Wide 5” Wide
6” Wide
Basic Bow (4 Loops) 2” Tails
22”
28”
34”
40”
28”
36”
44”
52”
34”
44”
54”
64”






Basic Bow Formula: Width of the Bow X (Number of Loops +Fluff
Factor) +2(Length of each tail)
*Fluff Factor for Basic Bow is usually 1, 1.5, or 2 depending on width of
the ribbon used and style of the ribbon.
Basic Bows can be made with varying loops and tail lengths using the
above formula.
Pre-measuring is required if you want both tail lengths to be side by
side. If made directly from the spool one tail will be behind the bow
while the other is in the front of the bow.
Bow tails can be cut as diagonal angles, dove-tails, or just a straight
edge.
Basic Bows can be attached to any type of hair bow hardware.
15
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch.12 Finishing Touches
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Bowdabra Bow Wire
•Hair Bow Tool & Ruler
•Morex Ribbon for 3” Wide Bow
•1.5” wide 22” long
•Morex Ribbon Finishing Knot
•5/8” wide 5” long (approx.)
•Alligator Clip
•Clear Nail Polish
•Glue Dots
To purchase materials visit:
Bowdabra® Ribbon Crafts & Things Store
17
Begin by gathering all the materials you will need for this project.
18
Place Bowdabra® Hair Bow Tool and Ruler onto the Mini
Bowdabra, leaving a space at the bottom for the Mini
Bowdabra tower to move. Cut an 18” piece of Bowdabra
Bow Wire and fold it in half. Lay it into the Mini Bowdabra.
You’ll have a loop at one end and two loose pieces at the
opposite end.
19
Cut the ribbon to desired length using the Ribbon Length
Formula or the Basic Bows Points of Interest page. Seal each
end of the ribbon with clear nail polish. The nail polish dries
quickly so there is no need to wait for it to dry.
20
Fold the ribbon in half to find the center. Make a crease
at the center point. For help making the ribbon crease
refer to the Helpful Hints Section. Place the ribbon at the
crease mark down into the center of the Mini Bowdabra.
21
Depending on how large you would like your hair bow to be
is where you place your first loops. Use the Loop Chart in
the Helpful Hints Section for reference. To make your first
loop, fold and make a crease into the ribbon and press into
the Mini Bowdabra.
22
Next, fold the other side at the same width. Ribbon tails
should be right side down above your loops.
23
Fold ribbon tails one at a time down through the center of
the Mini Bowdabra, making creases into each tail.
24
Scrunch down with Mini Bowdabra Wand.
25
While the bow is still in the Mini Bowdabra, thread the two
loose ends of the Bowdabra Bow Wire through the loop at
the other end.
26
Pull the Bowdabra Bow Wire tightly while the bow is still in
the Mini Bowdabra.
27
Gently pull the bow out of the Mini Bowdabra. Separate
the two loose ends of the Bowdabra Bow Wire and bring
them around to the back of the bow and knot. Refer to the
Final Touches for attaching a variety of hardware and
finishing ribbons.
28
Fluff bow and you are finished! No need for hot glue or
sewing. Bow pictured was finished using an alligator clip
and a finishing knot.
29
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•1.5” wide 22” long – 1st bow
•1.5” wide 22” long – 2nd bow
•Alligator Clip
•Glue Dots
31
This bow is very simple to make. Follow the
instructions for making a Basic Bow with 2”
Tails. However, stack an additional Basic Bow
on top of the other going in the opposite
direction
Finish the bow the same way as all the
others. Scrunch down with the Mini Bowdabra
Bow Wand. Pull the Bowdabra Bow Wire
tightly while the bow is still in the Mini
Bowdabra. Gently pull the bow out of the
Bowdabra. Separate the two loose ends of the
Bowdabra Bow Wire and bring them around to
the back of the bow and knot. Refer to the
Final Touches Chapter for attaching a variety
of hardware and finishing ribbons. Bow
pictured was finished using an alligator clip
32
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Alligator Clip
•Glue Dots
34
This bow is also very simple to make. Follow
the instructions for making a Basic Bow with
2” Tails. However, instead of doing four loops
you will be making six loops.
35
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•5/8” wide 26” long
•Morex Ribbon Finishing Ribbon
•French Clip
•Glue Dots
37
Begin by gathering all the materials you will need for this
project.
38
Bowdabra tower to move. Cut a 18” piece of Bowdabra
opposite end.
39
Formula or the Basic Bow Points of Interest page. Seal each
end of the ribbon with clear nail polish. The nail polish dries
40
Fold the ribbon in half and make a crease. For help
making the ribbon crease refer to the Helpful Hints
Section. Place the ribbon at the crease mark right side
down into the center of the Mini Bowdabra.
41
Depending on how large you would like your hair bow to
be is where you place your first loops. Use the Loop Chart
in the Helpful Hints Section for reference. To make your
first loop, fold and twist the ribbon and press into the
Mini Bowdabra.
42
Next, fold and twist the other side at the same width.
Ribbon tails should be right side down above your loops.
43
Fold ribbon tails one at a time down through the center
of the Mini Bowdabra, making creases into each tail.
Scrunch down with Mini Bowdabra Wand.
44
While the bow is still in the Mini Bowdabra, thread the
two loose ends of the Bowdabra Bow Wire through the
loop at the other end.
45
Pull the Bowdabra Bow Wire tightly while the bow is still
in the Mini Bowdabra.
46
Gently pull the bow out of the Bowdabra. Separate the
two loose ends of the Bowdabra Bow Wire and bring
them around to the back of the bow and knot. Refer to
the Final Touches Chapter for attaching a variety of
hardware and finishing ribbons.
47
sewing. Bow pictured was finished using a french clip
and a finishing ribbon.
48
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•5/8” wide 32 long – 1st strand
•5/8” wide 32 long – 2nd strand
•Elastic Hair Rubber Band
•Glue Dots
50
This bow is also very simple to make. Follow
the instructions for making a Basic Bow with
2” Tails. However, instead of doing four loops
you will be making six loops. As well as,
stacking the ribbon on top of each other and
4” tails.
pictured was finished using an elastic hair
band and a finishing knot.
51
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•5/8” wide 34 long
•Alligator Clip
•Glue Dots
53
Follow the instructions for making a Basic
Bow with One-Sided Ribbon. However,
instead of doing four loops you will be making
eight loops. This bow will have the standard
2” tails.
54
Pinwheel Bow 
Pinwheel Bow Extra
Wide Ribbon 
Pinwheel Bow
Stacked 
Pinwheel Bow 2
Tone 
Pinwheel Bow OneSided Ribbon 
Quad Loop Pinwheel
Bow 
3” Pinwheel & 4”
Quad Loop Stacked

Quad Pinwheel OneSided Ribbon 
Bow Type
6” Wide
Pinwheel Bow
10.5”
14”
17.5”
21”
Quad Loop Pinwheel Bow
18”
24”
30”
36”






Pinwheel Formula: Width of the Bow X (Number of Loops +Fluff Factor)
+2(Length of each tail)
*Fluff Factor for a Pinwheel Bow is usually .5
Pinwheel Bows can be made with varying loops and tail lengths using
the above formula.
Pre-measuring is NOT required when making Pinwheel Bows. Cut the
bow away from the spool after you have made the bow and tied the
Bowdabra Bow Wire.
edge.
Pinwheel Bows can be attached to any type of hair bow hardware.
56
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•1 ½” wide 10.5 long (premeasuring not necessary)
•Morex Basic Finishing Ribbon
•Alligator Clip
•Glue Dots
58
project.
59
opposite end.
60
Formula or the Points of Interest page. Seal each end of the
ribbon with clear nail polish. The nail polish dries quickly so
there is no need to wait for it to dry. Optional: Seal the
end of the ribbon but leave the remaining ribbon on the
spool.
61
Make your first tail; it should be the same length as the
loop you make in step 5.
62
is where you place your first loops. To make your first loop,
fold the ribbon and press into the Mini Bowdabra. Next,
fold a loop on the other side at the same width.
63
If you did not pre-measure the ribbon continue to leave the
ribbon on the spool for the other tail. Each tail should be
at opposite angles.
64
Scrunch down with the Mini Bowdabra Wand.
65
loose ends of the Mini Bowdabra Bow Wire through the loop
at the other end.
66
the Mini Bowdabra.
67
Gently pull the bow out of the Bowdabra. Separate the two
loose ends of the Bowdabra Bow Wire and bring them
around to the back of the bow. To tie off the bow, pinch the
Bowdabra Bow Wire securely against the bow. Twist the bow
in a clockwise direction and knot. Optional: Cut away
from spool with a diagonal cut if you didn’t pre-measure.
68
Fluff bow and attach the hair bow hardware. Bow pictured
was finished using an alligator clip and a finishing ribbon.
69
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•2 ¼” wide 10.5 long
•Alligator Clip
•Glue Dots
71
Follow the instructions for making a Pinwheel
Bow. However, use extra wide ribbon 2” wide
or greater.
the back of the bow and knot. Seal and cut
the ends of the ribbon. Refer to the Final
Touches Chapter for attaching a variety of
hardware and finishing ribbons. Bow pictured
was finished using an alligator clip and a
finishing knot.
72
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•5/8” wide 10.5 long 1st ribbon
•5/8” wide 10.5 long 2nd ribbon
•Alligator Clip
•Glue Dots
74
Bow. However, instead of making one bow
stack two on top of each other..
the back of the bow and knot. Seal and cut
the ends of the ribbon. Refer to the Final
Touches Chapter for attaching a variety of
hardware and finishing ribbons. Bow
75
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•7/8” wide 10.5 long 1st ribbon
•7/8” wide 10.5 long 2nd ribbon
•Alligator Clip
•Glue Dots
77
project.
78
Bowdabra, leaving a space at the bottom for the Bowdabra
tower to move. Cut a 18” piece of Bowdabra Bow Wire and
fold it in half. Lay it into the Bowdabra. You’ll have a loop
at one end and two loose pieces at the opposite end.
79
Formula or you the Points of Interest page. Seal each end of
the ribbon with clear nail polish. The nail polish dries
quickly so there is no need to wait for it to dry. Optional:
Seal the ends of the ribbon but leave the remaining
ribbon on the spool.
80
Place your ribbon with “Mountain Down” crease at the 1.5”
mark.
81
Place the second ribbon with a “Mountain Down” crease
also at the 1.5” mark. The ribbon angles should be
opposite.
82
be is where you place your first loops. Use the Loop
Chart for Reference. To make your first loop, fold and
crease the ribbon and press into the Mini Bowdabra.
83
Next, fold the other ribbon making a loop at the same
width.
84
Continue folding the ribbon at the same width on the
other side.
85
Fold the final ribbon piece at the same width to finish
the bow.
86
Scrunch down the ribbon with the Mini Bowdabra Wand.
87
88
89
hardware and finishing ribbons. Optional: Seal and cut
the ends of the ribbon from the spool.
90
Fluff bow and you are finished! Bow pictured was finished
using an alligator clip and a finishing knot.
91
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•5/8” wide 10.5 long
•French Clip
•Glue Dots
93
project.
94
opposite end.
95
there is no need to wait for it to dry. Optional: Seal the
end of the ribbon but leave the remaining ribbon on the
spool.
96
Fold the ribbon in half to find the center point. Make
a crease in the center. For help making the ribbon
crease refer to the Helpful Hints Section. Place the
ribbon at the crease mark down into the center of the
Mini Bowdabra.
97
Chart in the Helpful Hints Section for reference. To make
your first loop, fold, twist, and crease the ribbon and
press into the Mini Bowdabra.
98
Next, fold and twist the other side making a loop at the
same width.
99
100
101
102
hardware and finishing ribbons. Optional: Seal and cut
the ends of the ribbon from the spool.
103
Fluff bow and you are finished! Bow pictured was
finished using a french clip and a finishing knot.
104
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch.13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Alligator Clip
•Glue Dots
106
project.
107
opposite end.
108
Formula or use the Points of Interest page. Seal each end of
the ribbon with clear nail polish. The nail polish dries
109
Fold the ribbon in half to find the center point. Make a
crease in the center. For help making the ribbon crease
refer to the Helpful Hints Section. Place the ribbon at
the crease mark down into the center of the Mini
Bowdabra.
110
Chart in the Helpful Hints Section for reference. To make
your first loop, fold and crease the ribbon and press into
the Mini Bowdabra. Tail should be facing down.
111
Next, fold the other side making a loop at the same
width.
112
Make another loop the same width as the others with the
same ribbon tail used in Step 6.
113
Make your last loop the same width as the others with
the tail that is facing down. Fold and crease the ribbon
and press into the Mini Bowdabra.
114
115
116
117
118
119
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Morex Ribbon for 4” Quad Loop
Pinwheel Bow
•1http://ribbonsandthingsstor
e.com/product.php?id_product
=934 ½” wide 24” long
•Morex Ribbon for 3” Pinwheel
•5/8” wide 10.5” long
•Alligator Clip
•Glue Dots
121
Follow the instructions for making a Quad
Loop Pinwheel and then stack a Pinwheel Bow
on top of it.
Bowdabra. Gently pull the bow out of the Mini
122
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Alligator Clip
•Glue Dots
124
project.
125
opposite end.
126
Formula or using the Points of Interest page. Seal each end
of the ribbon with clear nail polish. The nail polish dries
127
refer to the Helpful Hints Section. Place the ribbon right
side down into the center of the Mini Bowdabra.
128
be is where you place your first loops. To make your first
loop, fold, twist, and crease the ribbon and press into the
Mini Bowdabra. Tail should be facing down.
129
Next, fold and twist the other side making a loop at the
same width. Tail should be facing up.
130
Make another loop the same width as the others with the
tail that is facing up. Fold and crease the ribbon and press
into the Mini Bowdabra.
131
Make your last loop the same width as the others with
the tail that is facing down. Fold and crease the ribbon
and press into the Mini Bowdabra.
132
133
loop at the other end. Pull the Bowdabra Bow Wire
tightly while the bow is still in the Mini Bowdabra.
134
135
136
Boutique Bow

Boutique Bow
Dovetails Pinwheel
Stacked 
Twisted Boutique
Bow 
Boutique Bow
With Dove-Tails 
Boutique Bow with
Basic Bow Stacked

Boutique Bow
w/Dovetails Twisted
Bow Stacked 
Boutique Bow
w/Dovetails Up &
Down 
Bow Type
6” Wide
Boutique Bow
14”
18”
22”
26”
Twisted Boutique Bow
18”
23”
28”
33”
Boutique Bow with 2” Tails
18”
22”
26”
30”








Boutique Bow Formula: Width of the Bow X (Number of Loops) + 2”
Twisted Boutique Bow: Width of the Bow X (Number of Loops) + 3”
Boutique Bow 2” Tails: Width of the Bow X (Number of Loops) +
2(Length of each tail) + 2”
Boutique Bows can be made with varying loops and tail lengths using
the above formula.
Pre-measuring is recommended for making these bows.
edge.
Boutique Bows can be attached to any type of hair bow hardware.
Boutique Bows work great on the bottom of stacking bows.
138
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•1 1/2” wide 18” long
•Alligator Clip
•Glue Dots
140
project.
141
opposite end.
142
there is no need to wait for it to dry.
143
refer to the Helpful Hints Section. Place the ribbon at the
crease mark down into the center of the Mini Bowdabra.
144
Grab the very end of one side of the ribbon. Fold the end
piece right side down into the center of the Mini
Bowdabra.
145
Grab the very end of the other side of the ribbon. Fold
over the first ribbon loop and right side down into the
center of the Mini Bowdabra. The two ribbons will form
an X on the top of the Mini Bowdabra towers.
146
Using the Hair Bow Tool and Ruler as your guide position all
four loops evenly and symmetrically. Start with the bottom
loop and make a crease in the center and press into the Mini
Bowdabra. Then take the top loop and make a crease in the
center of it, as well, press into the Mini Bowdabra.
147
Scrunch down the ribbon with the Mini Bowdabra wand.
148
loose ends of the Bowdabra Bow Wire through the loop at
the other end.
149
the Mini Bowdabra.
150
Gently pull the bow out of the Bowdabra. Separate the two
loose ends of the Bowdabra Bow Wire and bring them
around to the back of the bow and knot. Refer to the Final
Touches Chapter for attaching a variety of hardware and
finishing ribbons.
151
152
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Alligator Clip
•Glue Dots
154
project.
155
opposite end.
156
157
Bowdabra.
158
Grab the very end of one side of the ribbon. Fold the
end piece right side down into the center of the Mini
Bowdabra.
159
Grab the very end of the other side of the ribbon. Fold
over the first ribbon loop and right side down into the
center of the Mini Bowdabra. The two ribbons will form
an X on the top of the Mini Bowdabra towers.
160
Using the Hair Bow Tool and Ruler as your guide position
all four loops evenly and symmetrically. Start with the
bottom loop and make a crease in the center fold the
ribbon over twice and press into the Mini Bowdabra.
161
Take the top loop and make a crease in the center of it,
as well, fold over twice and press into the Mini
Bowdabra.
162
Scrunch down the ribbon with the Bowdabra wand.
163
164
165
sewing. Bow pictured was finished using an alligator
clip and a finishing knot.
166
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Alligator Clip
•Glue Dots
168
project.
169
opposite end.
170
171
Bowdabra.
172
Grab one end of the ribbon and crease the ribbon into the
Mini Bowdabra leaving a two inch tail, pointing down.
173
Grab the ribbon on the other side of the Mini Bowdabra
tower. Fold over the first ribbon loop and down into the
center of the Mini Bowdabra, leaving a two inch tail,
pointing up. The two ribbons will form an X on the top of
the Mini Bowdabra towers.
174
all four loops evenly and symmetrically. Start with the
bottom loop and make a crease in the center and press
175
Then take the top loop and make a crease in the center
of it, as well, press into the Mini Bowdabra
176
Scrunch down the ribbon with the Bowdabra Wand.
177
two loose ends of the Mini Bowdabra Bow Wire through the
178
179
180
181
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Morex Ribbon for 4” Boutique
Bow with Dove-tails
•1 ½” wide 22” long
•1 ½” wide 10.5” long
•Alligator Clip
•Glue Dots
183
Follow the instructions for making a 4”
Boutique Bow with Dove-Tails with a 3”
Pinwheel Bow stacked on top.
184
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
Bow
•Morex Ribbon for 4” Basic Bow
•Alligator Clip
•Glue Dots
186
Boutique Bow with a 4” Basic Bow with
dovetails stacked on top.
187
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
Bow with Dove-Tails
•Morex Ribbon for 3” Twisted
Boutique Bow
•Alligator Clip
•Glue Dots
189
Boutique Bow w/Dovetails with a 3” Twisted
Bow stacked on top. Bows can either be
made separately and attached or stacked on
top of each other inside the Mini Bowdabra.
190
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
Bow with Dove-tails
•5/8” wide 18” Long 1st ribbon
•5/8” wide 18” Long 2nd ribbon
•Finishing Button
•Alligator Clip
•Glue Dots
192
Follow the instructions for making a Boutique
Bow w/Dovetails. However, stack an
additional Boutique Bow w/Dovetails on top
of the other going in the opposite direction.
and a finishing button.
193
Bow Tie 
Twisted Bow Tie 
Twisted Bow Figure
8
Loopy Bow 
Multi-Colored Loopy
Bow 
Twisted Figure 8’s
Stacked 
Bow Tie & Twisted
Figure 8’s Stacked

Stacked Loopy Bows

Loopy Bow Up &
Down 
Bow Type
6” Wide
Bow Tie
14”
18”
22”
26”
Twisted Bow Tie
18”
23”
28”
33”

Bow Tie Formula: Width of the Bow X (Number of Loops) + 2”

Twisted Bow Tie Formula: Width of the Bow X (Number of Loops) +
3”

Pre-measuring is not required for any of these bows. However, the
Bow Tie and Twisted Bow Tie can be pre-measured while the Loopy
Bow can not.


Loopy Bows are easy to make and do not require pre-measuring.
Loopy Bows can be fluffed by holding the center and twisting and
forming each individual loop.

Loopy Bows can be attached to any type of hair bow hardware.
195
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Alligator Clip
•Glue Dots
197
project.
198
opposite end.
199
200
Make a “Mountain Down” crease on one of the ends.
201
Make another “Mountain Down” crease at the other end
of the ribbon.
202
Loop above the Mini Bowdabra Tower is formed with each
end gathered in the center of the Mini Bowdabra.
203
the loops evenly. Make a “Mountain Up” crease in the
center of the ribbon.
204
205
loop at the other end. Pull the Bowdabra Bow Wire tightly
while the bow is still in the Mini Bowdabra.
206
207
sewing. Bow pictured was finished using an alligator
208
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Alligator Clip
•Glue Dots
210
project.
211
opposite end.
212
Formula or Points of Interest page. Seal each end of the
there is no need to wait for it to dry. Optional: Leave
ribbon on the spool and seal one end with nail polish.
213
Fold the ribbon in half to find the center point press into
the Mini Bowdabra. Optional: Skip this step and make
your loop at step 5 without cutting the ribbon from
the spool.
214
Grab one end of the ribbon, twist once, and then place
the ribbon without a crease right side up into the Mini
Bowdabra.
215
Grab the other ribbon end and twist it in the opposite
direction and press without a crease it into the Mini
Bowdabra.
216
217
218
them around to the back of the bow and knot. Optional:
Cut ribbon from the spool if you did not pre-measure
the ribbon and seal the end
219
Fluff bow and add hardware and a finishing ribbon! No
need for hot glue or sewing. Bow pictured was finished
using an alligator clip and a finishing ribbon.
220
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Glue Dots
222
Follow the instructions for making a Twisted
Bow however add two more loops on either
side. Bow can be pre-measured or made
directly from the spool.
rubber band and a finishing ribbon.
223
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•3/8” wide No Pre-measuring
Needed
•Alligator Clip
•Glue Dots
225
project.
226
opposite end.
227
Seal the end of the ribbon with clear nail polish. The nail
polish dries quickly so there is no need to wait for it to dry.
228
fold and press into the Mini Bowdabra. Next, fold the other
side at the same width.
229
Continue folding two more loops back and forth.
230
When all the loops are finished leave ribbon on the spool.
231
232
233
the Mini Bowdabra.
234
them around to the back of the bow. To tie off the bow,
pinch the Bowdabra Bow Wire securely against the bow.
Twist the bow in a clockwise direction and knot.
235
Cut the ribbon away from the spool approximately twice
the length of one of the loops. Seal the end of the ribbon.
Loop the ribbon across the top and attach the Bow wire
tightly against the bow.
236
Attach bow to hair bow hardware. Refer to the Finishing
Touches Section. Bow pictured was finished using an
alligator clip . Once bow is securely attached to the
barrette trim away the Bowdabra Bow Wire. Fold the edge
of the ribbon over the wire and adhere with a glue dot.
237
To Fluff Bow: Hold the bow in the center and then gently
pull the loop and twist. Do this to every loop to give the
bow fullness. A matching pair can easily be made. Just use
the same ribbon length and loop sizes for your second bow.
238
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
Needed 1st Ribbon
Needed 2nd Ribbon
•Alligator Clip
•Glue Dots
240
Follow the instructions for making a Loopy
Bow However, use two coordinating strands
of ribbon and alternate the ribbon back and
forth making one loop and then another.
the back of the bow and knot. Finish the
center loops of the loopy bow with the ribbon
tails that you cut. Refer to the Final Touches
Chapter for attaching a variety of hardware.
Bow pictured was finished using an alligator
clip.
241
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
Needed
•Alligator Clip
•Glue Dots
243
Bow however add two more loops on either
side. Then continue adding more Twisted
Bows smaller in size inside of each other. The
ribbon that is being used is double-sided. To
change the color twist and turn the ribbon
inside of the Mini Bowdabra Tower before
making your next loop.
244
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Morex Ribbon for 3” Bow Tie
Bow Tie Figure 8’s
necessary
•Alligator Clip
•Glue Dots
246
Follow the instructions for making a Bow Tie
and then stack a Twisted Bow with Figure 8’s
on top.
247
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Morex Ribbon for 4” Loopy Bow
Needed
Needed
•Alligator Clip
•Glue Dots
249
Follow the instructions for making Loopy Bow
one larger than the other and stack them on
top of each other.
pictured was finished using an alligator clip.
250
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
Needed 1st Ribbon
Needed 2nd Ribbon
•Alligator Clip
•Glue Dots
252
Bow. Make two separate Loopy Bows. Trim
the wire off of the bottom bow. Leave a tail
on the top bow to make the finishing loop.
Tie the top bow to the bottom bow, bring the
Bowdabra Bow Wire around to the top of the
bow and form the finishing loop. Refer to the
of hardware. Bow pictured was finished
using an alligator clip.
253
Spiky Bow 
Lg. Spiky Bow Stacked
Pinwheel 
Spiky Bow with Bow
Tie Stacked 
Spiky Bow & Boutique
Bow with Dovetails
Stacked 
Spiky Bow One Up &
One Down 

Spiky Bow Formula: Cut the sprays the length of the bow width


Spiky Bows are wonderful for finding a use for scrap ribbon.
To fluff the bow gently pull and separate each spray.

Spiky Bows can be attached to any type of hair bow hardware.

Spiky Bows work great on the bottom of stacking bows.
255
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Morex Ribbon for 4” Spiky Bow
• 3/8” wide 4” strands
Sprays
•Alligator Clip
•Glue Dots
257
project.
258
opposite end.
259
Cut several strands of different ribbon. Diagonal Cut each
end. Seal the end of the ribbon with clear nail polish. The
nail polish dries quickly so there is no need to wait for it to
dry.
260
Place the ribbon strands into the center of the Mini
Bowdabra. Arrange the strands at various angles. Use the
Hair Bow Tool & Ruler as your guide to keep all the strands
at even lengths.
261
Continue adding ribbon lengths one on top of each other.
262
263
264
265
Fluff bow, attach Hair Bow Hardware using the Finishing
Touches Section and adhere Finishing Ribbon Sprays. A
matching pair can easily be made. Just use the same ribbon
length and loop sizes for your second bow.
266
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•5/8” wide 8” long multiple
strands
•Head Band
•Glue Dots
268
Follow the instructions for making Spiky Bow
and then stack a Pinwheel on top.
pictured was finished using a headband and
a finishing ribbon.
269
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
strands
Bow with Dove-Tails
•Alligator Clips
•Glue Dots
271
and then trim away the extra Bowdabra Bow
Wire. Make a separate Boutique Bow with
Dove-tails.
Attach the Boutique Bow with Dovetails to the
Spiky Bow. Refer to the Final Touches
Chapter for attaching a variety of hardware
and finishing ribbons. Bow pictured was
finished using an alligator clip and a
finishing ribbon.
272
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
strands
•Morex Ribbon for 2.5” Bow Tie
•Alligator Clips
•Glue Dots
274
and then stack a Bow Tie on top.
275
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•3/8” wide 4” multiple strands
•Morex Ribbon Finishing Sprays
•Snap Clip
•Glue Dots
277
Follow the instructions for making 4” Spiky
Bow , set it aside. Then make another 4”
Spiky Bow that will be turned in the opposite
direction when attached to the bow.
Trim away the Bowdabra Bow Wire from one.
The other Spiky Bow attach a finishing ribbon
while leaving the Bowdabra wire on. Attach
bows together and refer to the Final Touches
Chapter for attaching a variety of hardware.
Bow pictured was finished using an snap clip
and a finishing spray.
278
Baby Basic Bow
One-Sided Ribbon

Baby Boutique Bow

Baby Pinwheel
Dovetailed 
Baby Pinwheel
Stacked 
Baby Quad
Pinwheel 
Baby Quad
Pinwheel One-Sided
Ribbon 
Baby Butterfly 
Baby Loopy Bow 

When making Baby Bows use the centimeter side of Mini
Bowdabra® Hair Bow Tool & Ruler.

When at all possible do not pre-measure. The bows are so small it
is the easiest to work directly from the spool. Cut ribbon away
once the Bowdabra Bow Wire has been tied to the bow.

Bow Formulas can be used with centimeters or inches
280
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Hair Bow Tool & Ruler (cm side)
•Morex Ribbon 4 cm bow
•1 cm wide No pre-measuring
necessary
•1 cm wide 5 cm long
(approx.)
•Snap Clip
•Glue Dots
282
project. Use the cm side of the Mini Bowdabra® Hair Bow
Tool & Ruler.
283
Place Bowdabra® Hair Bow Tool and Ruler (cm side) onto
the Mini Bowdabra, leaving a space at the bottom for the
Mini Bowdabra tower to move. Cut a 18” piece of
Bowdabra Bow Wire and fold it in half. Lay it into the Mini
Bowdabra. You’ll have a loop at one end and two loose
pieces at the opposite end.
284
Seal the end of the ribbon with clear nail polish. The
nail polish dries quickly so there is no need to wait for it
to dry.
285
Begin by placing the ribbon “right side up” into the
center of the Mini Bowdabra leaving a tail 1 cm larger
than your first excepted loop. Fold and twist the ribbon
as you are placing it into the Mini Bowdabra Tower.
286
loop, fold, twist, and make a crease into the ribbon and
press into the Mini Bowdabra. Next, fold and twist the
other side at the same width.
287
Continue folding the two more loops back and forth. Do
not fold and twist the last loop so that the tail will be
right side up.
288
Cut a coordinating tail 1 cm larger than the loops on the
other side.
289
290
two loose ends of the Mini Bowdabra Bow Wire through
the loop at the other end. Pull the Bowdabra Bow Wire
291
Twist the bow in a clockwise direction and knot. Seal
the cut down with nail polish.
292
Fluff bow, add finish knot, and attach to a snap clip.
Refer to the Final Touches Chapter for attaching the hair
bow hardware. A matching pair can easily be made.
Just use the same ribbon length and loop sizes for your
second bow.
293
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
necessary
•Snap Clip
•Glue Dots
295
Tool & Ruler.
296
297
Seal the end of the ribbon with clear nail polish. The nail
polish dries quickly so there is no need to wait for it to dry.
298
fold and press into the Mini Bowdabra. Next, fold the other
side at the same width.
299
Continue folding two more loops back and forth.
300
301
302
303
Now cut ribbon end away from spool and seal the remaining
end of ribbon with clear nail polish.
304
Fluff bow and attach to a snap clip or refer to the Final
Touches Chapter for attaching a variety of hardware and
finishing ribbons. A matching pair can easily be made. Just
use the same ribbon length and loop sizes for your second
bow.
305
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
necessary
(approx.)
•French Clip
•Glue Dots
307
Tool & Ruler.
308
309
Dovetail the ribbon and seal the end of the ribbon with
clear nail polish. The nail polish dries quickly so there is
no need to wait for it to dry.
310
Make first tail; it should be the same length as the loop you
make in step 5.
311
loop, fold and twist the ribbon and press into the Mini
Bowdabra. Next, fold and twist the other side at the
same width.
312
Leave ribbon on the spool for the other tail. Each tail
should be at opposite angles. Scrunch down the ribbon
with the Mini Bowdabra Wand.
313
two loose ends of the Mini Bowdabra Bow Wire through
the loop at the other end. Pull the Bowdabra Bow Wire
314
315
Cut the ribbon the same length as the other side and
dovetail the end. Seal the remaining end of ribbon with
clear nail polish.
316
Fluff bow and attach the hair bow hardware. Bow pictured
was finished using an french clip and a finishing ribbon.
317
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
necessary
necessary
(approx.)
•Plastic Barrette
•Glue Dots
319
Follow the instructions for making a Baby
Pinwheel Bow with one stacked onto the
other facing in opposite directions.
the back of the bow and knot. Cut ends in a
diagonal cut. Refer to the Final Touches
Chapter for attaching a variety of hardware
and finishing ribbons. Bow pictured was
finished using a plastic barrette and a
finishing knot.
320
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•.8 cm wide No pre-measuring
necessary
Morex Ribbon Finishing Ribbon
•.8 cm wide 5 cm long
(approx.)
•Snap Clip
•Glue Dots
322
Pinwheel Bow, except use the centimeter side
of the Hair Bow Tool and Ruler.
pictured was finished using a snap clip and a
finishing ribbon.
323
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
t
(For Bow Pictured)
•Mini Bowdabra
•1.5 cm wide 18 cm
Morex Ribbon Finishing Knot
•.8 cm wide 5 cm long
(approx.)
•Snap Clip
•Glue Dots
325
Pinwheel Bow One-Sided Ribbon, except use
the centimeter side of the Hair Bow Tool and
Ruler.
pictured was finished using a snap clip and a
finishing knot.
326
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Morex Ribbon Butterfly Bow
•1.5 cm wide 7.5 cm long
•Snap Clip
•Glue Dots
328
Follow the instructions for making a Butterfly
Bow except use the centimeter side of the
Hair Bow Tool and Ruler.
of hardware. Bow pictured was finished
using a snap clip.
329
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Morex Ribbon 4 cm Loopy Bow
necessary
•Glue Dots
331
Bow except use the centimeter side of the
Hair Bow Tool and Ruler.
the back of the bow and knot. Cut the ribbon
away from the spool approximately twice the
length of one of the loops. Seal the end of
the ribbon. Loop the ribbon across the top
and attach the Bow wire tightly against the
bow. Refer to the Final Touches Chapter for
attaching a variety of hardware. Bow
band.
332
Boutique Bow Loopy Bow
Stacked
Jingle Bell Attached 
Basic Bow with Spray
(Loop for the Collar) 
Meow Spiky Bow 
“Puppy Love”
Pinwheel Stacked 

Pet Bows are made to either be attached to Hair Bow Hardware or
slid along the pet’s collar. A small loop can be made before
beginning the bow or the Bowdabra Bow Wire can be used to attach
the collar.

Any bow in this book can be used for a pet. However, these were
chosen specifically with your pets in mind. Morex ribbon offers a
wide variety of pet themed ribbons that are perfect for pet bows.
334
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
Bow
•1 3/8” wide 18” long
needed (multiple ribbon
strands)
•Alligator Clip
•Glue Dots
•Jingle Bell
336
Boutique Bow , set aside. Then make a 4”
Loopy Bow . Tie Loopy Bow to the Boutique
Bow.
Cut a small piece of finishing ribbon and
thread a jingle bell onto the center.
337
Refer to the Final Touches Chapter for
attaching a variety of hardware and finishing
ribbons. Use the jingle bell as your finishing
piece. Fluff bow and you are finished! Bow
and a finishing ribbon with a jingle bell
threaded through..
338
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Morex Ribbon for Collar Loop
•Morex Ribbon for Spray
•3/8” wide 4” Spray
•Glue Dots
340
Cut a small piece of ribbon and fold in half.
Place the loop on one side and the ends on
the other side of the Mini Bowdabra tower.
This is the loop that the pet’s collar will be
fed through.
Follow the instruction for making a Basic Bow
with Dovetails. Add a piece of ribbon on top
of the bow for a finishing touch. This piece of
ribbon is referred to as a spray.
341
Final Touches Chapter for attaching finishing
ribbons. NO Hardware is necessary just use
the loop on the back to attach the bow to the
pet’s collar
Fluff bow and you are finished! No need for
hot glue or sewing. Bow pictured was
finished using a finishing knot.
342
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
strands
strands
•Glue Dots
344
Follow the instructions for making a Spiky
Bow.
the back of the bow and knot.
Tie a small loop with the Bowdabra Bow Wire
to thread the cat collar through. Trim away
extra wire. Bow pictured was finished using
a finishing ribbon knot.
345
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
Bow
One-Sided Ribbon
•Morex Ribbon “Puppy Love
Spray
•Plastic Barrette
•Glue Dots
347
Bow with a Pinwheel Bow One-Sided Ribbon
stacked on top. Attach a spray on top.
pictured was finished using a plastic
barrette and a finishing ribbon.
348
Butterfly 1 
Butterfly 2 
Dragonfly 
Flower 
Flower with
Leaves
Butterfly on
Flower 
Patriotic

School Days

Halloween 
Holiday 
Birthday 
Valentine’s
Day 
Best Friends

Princess 

Butterfly Formula: Width of the Bottom (2.5) + Width of the Top
(2.5)


Butterfly Bow 1 works best for wider ribbon, smaller bow widths,
and baby bows. It is the only bow in this book that is made with
the front of the bow facing down towards the Hair Bow Tool &
Ruler.
Butterfly Bow 2 is best for thin width ribbon and for larger bows.

Themed Bows can be attached to any type of hair bow hardware.

Morex Ribbon has a variety of different themed ribbons that make
these bows perfect for a variety of occasions.
350
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Morex Ribbon for Butterfly Bow
•1 ½” wide ” 12.5” long
•Alligator Clip
•Glue Dots
•Adhesive Gems
352
project.
353
opposite end.
354
355
Bowdabra.
356
To make your first loop fold the ribbon and press it into
the Mini Bowdabra. The ribbon loop will be the small
loop for the bottom of the butterfly.
357
Next, fold down loop at the top for your top butterfly
wing.
358
Fold the ribbon down into the center for the bottom
butterfly wing. Fold the other side down into the Mini
Bowdabra, as well.
359
360
361
362
them around to the front of the bow and knot. (This is
the only bow that is made upside down. The front of
the bow is actually facing down towards the Hair Bow
Tool & Ruler.)
363
Refer to the Final Touches Chapter for attaching a
variety of hardware. Bow pictured was finished using
an alligator clip.
364
After hardware is attached bring the Bowdabra Bow Wire
to the front and use the leftover to form the butterfly’s
antennas. Optional – Add adhesive gems to the
butterfly’s wings. Fluff bow and you are finished!
365
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Morex Ribbon for Butterfly Bow
•3/8” wide ” 17.5” long
•Snap Clip
•Glue Dots
367
project.
368
opposite end.
369
370
Place the ribbon end into the Mini Bowdabra Tower.
371
To make the top wings of the butterfly loop lay the
ribbon over the top of the Mini Bowdabra Tower and
press into the Mini Bowdabra.
372
To make the bottom wings of the butterfly loop lay the
ribbon over the top of the Mini Bowdabra Tower and press
373
Press the ribbon down into the center of the Mini
Bowdabra. First the bottom loop and then the top.
374
375
376
377
hardware.
378
After hardware is attached bring the Bowdabra Bow Wire
to the front and use the leftover to form the butterfly’s
antennas. Fluff bow and you are finished! Bow pictured
was finished using a snap clip.
379
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
Bow Figure 8
•3/8” wide ” No Pre-Measuring
Needed
•Snap Clip
•Glue Dots
381
Bow Figure 8. Thin width ribbon is
recommended for the dragonfly.
Final Touches Chapter for attaching a snap
clip. Take the extra Bowdabra Bow Wire and
twist it into a ball to form the dragonfly’s
head. Adhere with a glue dot.
382
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Morex Ribbon
•1 ½” wide ” No Pre-Measuring
Needed
•French Clip
•Glue Dots
384
project.
385
opposite end.
386
Cut the ribbon and seal the end of the ribbon with clear nail
polish. The nail polish dries quickly so there is no need to
wait for it to dry.
387
Fold the ribbon through the center of the Mini Bowdabra
like an accordion. Larger width ribbons work the best.
388
Continue folding the ribbon in to the center of the Mini
Bowdabra. For a very full flower place ribbon in until you
reach the very top of the Mini Bowdabra towers. Cut the
ribbon from the spool when desired height is reached,
seal.
389
390
loop at the other end. Pull the Bowdabra Bow Wire
391
the Final Touches Chapter for attaching a variety of hair
bow hardware .
392
To fluff the bow and form the flower shape; gently pull
and twist the top half of the bow. Twist the ribbon so
that the Bowdabra Bow Wire is no longer showing. Bow
pictured was finished using a french clip.
393
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
Bow Tie
•Morex Ribbon for Flower Bow
•7/8” wide No Pre-Measuring
Needed
•French Clip
•Glue Dots
395
Bow Tie, and then stack a Flower Bow on top.
pictured was finished using a french clip.
396
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•2” wide No Pre-Measuring
Needed
•Morex Ribbon for Butterfly
•5/8” wide 12.5” long
•Alligator Clip
•Glue Dots
398
Follow the instructions for making a Flower
Bow. Then follow the instructions for making
a Butterfly Bow (use the extra wire for the
Butterfly’s antennas).
Using the Bowdabra Bow Wire from the
Flower Bow attach the Butterfly to the top of
the flower. Refer to the Final Touches
Chapter for attaching a hair bow hardware.
Fluff finished bow. Bow pictured was
finished using an alligator clip.
399
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
• Mini Bowdabra
• Bowdabra Bow Wire
• Hair Bow Tool & Ruler
• Morex Ribbon 3” Boutique Bow
• 1 ½” wide 14” long
• Morex Ribbon 3” Boutique Bow
• 3/8” wide 14” long
• Morex Ribbon 3” Twisted Bow Tie
• Morex Ribbon 2” Pinwheel Bow
• Morex Ribbon 3” Spray
• Morex Ribbon Finishing Ribbon
• 3/8” wide 5” long (approx)
• Alligator Clip
• Clear Nail Polish
• Glue Dots
401
Bow. Make two stacked on top of each other
with coordinating ribbon. Set aside.
Bow Tie, then stack a Pinwheel, and lastly a
spray on top.
402
Stack bows together and tie Bowdabra Bow
wire tightly around the center.
Refer to the Final Touches Chapter for
attaching a hair bow hardware and finishing
ribbons. Bow pictured was finished using an
alligator clip and a finishing ribbon.
403
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•Morex Ribbon 4” Boutique Bow with
Dove-Tails
•Morex Ribbon “School Days” Sprays
•5/8” wide 6.5” long (2 strands)
•Morex Ribbon Spray
•3/8” wide 4” long (1 strand)
•Morex Ribbon 4” Pinwheel
•Morex Ribbon 3” Pinwheel Bow
One-sided Ribbon
•5/8” wide 10.5” long
•3/8” wide 5” long (approx)
•Alligator Clip
•Glue Dots
405
Boutique Bow with Dovetails place sprays on
top. Then make a with 4” pinwheel stacked
with a 3” pinwheel one-sided ribbon.
wire tightly around the center. Refer to the
finishing ribbons and hair bow hardware. Bow
406
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
•2” wide No Pre-Measuring
Needed
•Morex Ribbon for Stem
•Alligator Clip
•Glue Dots
408
Follow the instructions for making a Flower
Bow except use a pumpkin color.
Attach a small strip of ribbon with a diagonal
cut to an alligator clip using glue dots or a hot
glue gun.
Finish bow by attaching the pumpkin to the
alligator clip. Twirl the extra Bowdabra Bow
Wire with a paint brush handle or something
thin to give the hair bow a finished festive
fall feel.
409
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
8 Loops with 2” Tails
•Alligator Clip
•Glue Dots
•Beaded Garland
411
Bow with 6 Loops. Then make a Bow Tie
stack a Loopy Bow of beaded garland on top.
finishing ribbons and hair bow hardware.
412
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
6 Loops with 2” Tails Diagonal
Cut
•1 1/2” wide 36” long
Bow
•Morex Ribbon to Bead
•Alligator Clip
•Glue Dots
414
Bow with 6 Loops with diagonal cuts, set
aside. Then make a Boutique Bow.
Wire tightly around the center. Refer to the
Optional: Bow pictured was finished using
an alligator clip and Morex Beaded Ribbon
finishing ribbon.
415
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For Bow Pictured)
•Mini Bowdabra
Bow
•Morex Ribbon Finishing Sprays
•Alligator Clip
•Glue Dots
417
Bow stack a Spiky Bow on top.
The finishing ribbon style pictured is the
Ribbon Sprays method attached to an
alligator clip.
418
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
(For One Bow Pictured)
•Mini Bowdabra
Pinwheel Bow
•Morex Ribbon “Best Friend”
Spray
•Alligator Clip
•Glue Dots
420
Pinwheel Bow. Attach a Morex “Best Friends”
spray on top.
Wand. Pull the Bowdabra Bow Wire tightly
Gently pull the bow out of the Mini Bowdabra.
Separate the two loose ends of the Bowdabra
Bow Wire and bring them around to the back
of the bow and knot. Refer to the Final
Touches Chapter for attaching a variety
and a finishing knot. Make two: one for
each friend!
421
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
•Mini Bowdabra
Bow Tie
Bow
•Morex Ribbon “Princess” Spray
•5/8” wide 5.5” long (2)
•Morex Ribbon “Princess” Spray
•5/8” wide 3.5” long
•Alligator Clip
•Glue Dots 423
Bow Tie Figure 8. Stack a Boutique Bow on
top. Then Morex “Princess” sprays with dovetails as the final stack.
Bow pictured was finished using an alligator
424
Cheerleader

Soccer 
Baseball 
Football

Basketball


Stacked Sport Bows can be attached to any Hair Bow Hardware.
However, with most sports bows they are attached to either pigtails or pony-tails. Alligator clips work best above elastic rubber
bands. Or bows can be attached directly on to an elastic rubber
band.

Morex ribbon offers a wide variety of sports themed ribbons that
are perfect for these type of bows.
426
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
•Mini Bowdabra
needed
8 Loop One-Sided Bow
•Alligator Clip
•Glue Dots
428
Follow the instructions for making a 4” Loopy
Bow, set aside. Then make a 4” Basic Bow 8
Loop One-Sided Bow.
of hair bow hardware. Bow pictured was
429
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
•Mini Bowdabra
Pinwheel Bow
•3/8” wide no need to premeasure (4 loops on each side)
•Morex Ribbon for 5” Soccer
Spray
•Glue Dots
431
Follow the instructions for making a 4” Quad
Loop Pinwheel Bow . The make 4” Loopy Bow
(4 loops on either side) with “Soccer” Spray
on top.
band and a finishing ribbon.
432
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
•Mini Bowdabra
•2 1/4” wide 12” long
Figure 8 Bow
Bow
•2 1/4” wide 18” long
•Morex Ribbon for 4” Sprays
•3/8” wide 4” long (3)
•Alligator Clip
•Glue Dots
434
Follow the instructions for making a 5” Bow
Tie attach a 6” Spray. Next, make a 4”
Twisted Figure 8 Bow place a 4” Boutique Bow
on top. Slip the Boutique Bow’s loops inside
of the Twisted Figure 8 Bow, set aside. Lastly,
attach 3 sprays and stack 4” Bow Tie.
435
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
•Mini Bowdabra
Bow
•Morex Ribbon 4” Boutique Bow
with Dove-Tails
•Morex Ribbon 5” Sprays
•3/8” wide 5” long (2)
•Morex Ribbon 5” Sprays
Baseball
•5/8” wide 5” long (1)
•Morex Ribbon Finishing Button
•Elastic Rubber Band
•Glue Dots
437
Boutique Bow, set aside. Make a 4” Boutique
Bow with Dove-Tails, stack sprays on top.
band and a finishing button.
438
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
•Mini Bowdabra
Bow
•Morex Ribbon (2) 4” Boutique
Bow with Dove-Tails
•Morex Ribbon 5.5” Spray
•5/8” wide 5.5” long
•Glue Dots
440
Twisted Bow, set aside. Then make a (2) 4”
Boutique Bow with Dovetails attach
“Basketball” spray on top.
441
Loopy Bead Bow 
Basic Bow 6 Loops
Beaded Tails 
Spiky Beaded Bow

Beaded Bow 
Boutique Bow with
Beaded Sprays 

Before beginning bows large eyed beads must be attached to
ribbon. Open the Ribbon to Bead package and completely unwind
the ribbon. Make an overhand knot at the end of the ribbon.
Beads will be slid the entire length of the ribbon .

Once beads have been loaded, cut the other end of the ribbon,
leaving the needle end in tack for reusing.
443
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
•Mini Bowdabra
•Morex Ribbon to Bead for 4”
Loopy Bow
needed
•Large Eyed Plastic Beads
•Alligator Clip
•Glue Dots
445
Follow the instructions for making a 4” Loopy
Bow. However, attach a bead to each loop
using the Morex Ribbon to Bead. Refer to the
Beaded Bows Points of Interest page for
helpful hints.
of hair bow hardware. Bow pictured was
446
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
•Mini Bowdabra
Basic Bow 6 Loops
•Large Eyed Beads
•Plastic Barrette
•Glue Dots
448
Begin by threading large eyed beads on the
Morex Ribbon to Bead. Then cut ribbon to
desired length and knot either end. Refer to
Beaded Bows Points of Interest page. Follow
the instructions for making a 3” Basic Bow 6
Loops.
barrette and a finishing knot.
449
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
•Mini Bowdabra
Spiky Bow
•3/8” wide 4” long (several
strands)
•Large Eyed Beads
•Glue Dots
451
Morex Ribbon to Bead. Then cut ribbon to
desired lengths and knot either end. Refer to
Beaded Bows Points of Interest page. Follow
the instructions for making a 4” Spiky Bow.
452
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
•Mini Bowdabra
•Morex Ribbon to Bead
•3/8” wide no pre-measuring
needed
•Large Eyed Beads
•Plastic Barrette
•Glue Dots
454
Morex Ribbon to Bead. Refer to Beaded Bows
Points of Interest page.
Next, form two loops on either side of the
Mini Bowdabra tower (a total of 4 loops).
Position the beads so that there is only ribbon
in the center of the Mini Bowdabra.
barrette and a finishing knot.
455
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
•Mini Bowdabra
Bow
Sprays
•5” wide 4” long (2 sprays)
•Large Eyed Beads
•Alligator Clip
•Glue Dots
457
Boutique Bow. Attach two 4” sprays by
threading large eyed beads on the Morex
Ribbon to Bead. Cut ribbon to desired lengths
and knot either end. Refer to Beaded Bows
Points of Interest page.
458
Alligator
Clips
Elastic Band
Plastic
Barrette
French Clip
Snap Clip
Head Band
Basic
Finishing
Ribbon
Finishing
Knots
Finishing
Beads
Finishing
Morex Ribbon
to Bead
Finishing
Buttons
Finishing
Sprays
 Bowdabra recommends using glue dots to adhere
finishing ribbon and knots to the center of your bows and
around hair clips. Glue dots are easy to work with and allow
all ages to participate in bow making, safely.
 Tacky Glue is another method of adhering finishing ribbon
and knots to the center of the bow. However, tacky glue can
take some time to dry and the time spent making a bow and
waiting for it to dry is considerably longer.
 A Hot Glue Gun is another common method used to finish
bows and line hair clip hardware. Bowdabra choices not to use
a Hot Glue Gun so that all ages and abilities can easily and
safely make bows. However, professional bow makers often use
a hot glue gun for finishing knots and to line their hair clips
with ribbon prior to attaching a bow.
460
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
Open alligator clip and attach Bowdabra Bow Wire securely
against the bottom prong.
462
Run Bowdabra Bow Wire along the underneath of the
Alligator Clip and knot. Bring Bowdabra Bow Wire to the
front of the bow, twist and bring the back again.
463
Tie against the Alligator Clip one more time and trim wire.
464
After bow is securely attached to alligator clip; attach
desired finishing ribbon. The finishing ribbon pictured
above is a called finishing knot.
465
Finishing the ends of the alligator clips is optional and can be done either before
or after the bow has been attached to the clip.
It is best to adhere a small finishing ribbon to
the end of the clip using hot glue but glue dots
or tacky glue are also an option.
Tightly wrap the other end of ribbon around to
the other side of the alligator clip glue and
trim.
466
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
Wrap Bowdabra Bow Wire around the elastic from front of
the bow to the back several times. Trim away excess wire.
468
After bow is securely attached to the elastic hair band;
attach desired finishing ribbon. The finishing ribbon
pictured above is a called finishing knot.
469
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
Tie the Bowdabra Bow Wire around the headband and bow
several times. Trim away excess wire.
471
After bow is securely attached to the headband; attach
desired finishing ribbon. The finishing ribbon pictured
above is a called the basic finishing ribbon.
472
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
Thread Bowdabra Bow Wire through the center holes of
the white plastic barrette.
474
Knot Bowdabra Bow Wire tightly against the barrette.
475
After bow is securely attached to the plastic barrette;
pictured above is a called the basic finishing ribbon.
476
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
Run the Bowdabra Bow through the eye hole of the
French Clip. Knot the wire tightly.
478
Knot the Bowdabra Bow Wire on either side of the
French Clip. Trim away the excess wire.
479
After bow is securely attached to the French Clip;
pictured above is a called a finishing knot.
480
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
Important: Before attach bow to the snap clip you must
add a finishing ribbon. However, leave Bowdabra Wire on
the finished Bow. Place the Bowdabra Bow Wire between
each side of the snap clip prong.
482
Pull the bow flush against the clip and tie the Bowdabra
Bow Wire tightly around the center prong.
483
Bring the Bowdabra Bow Wire around to the front of bow.
Tie the wire around the bottom of the bow and then at
the top of bow.
484
Trim away excess Bowdabra Bow Wire.
485
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
Cut a small piece of finishing ribbon approximately 5” long.
487
Stretch a glue dot to run thinly along the top of the
Bowdabra Wire in the center of the bow (hot glue will
work as well). Attach the finishing ribbon along the glue
bead.
488
Run finishing ribbon to the back of the barrette, trim to
length, seal ends with clear polish, and adhere with glue
dots.
489
Bow is complete and ready to wear!
490
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
Cut a small piece of finishing ribbon approximately 5” long
and make an overhand knot in the center.
492
Stretch a glue dot to run thinly along the top of the
Bowdabra Wire in the center of the bow. Attach the
finishing knot along the glue bead.
493
Run finishing ribbon to the back of the barrette, trim to
length, seal ends with clear polish, and adhere with glue
dots.
494
495
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
After attaching the bow to the barrette DO NOT trim
away extra Bowdabra Bow Wire. Rather thread seed
beads on one of strands
497
Bring the Bowdabra Bow Wire around to the back and tie
off.
498
499
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
Begin by threading large eyed beads on the Morex Ribbon
to Bead. Refer to Beaded Bows Points of Interest page for
helpful hits for getting started.
501
Then cut ribbon to desired length and knot both ends.
502
Run beaded finishing ribbon to the back of the barrette,
trim to length, seal ends with clear polish, and adhere with
glue dots.
503
504
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
After attaching the bow to the barrette DO NOT trim
away extra Bowdabra Bow Wire. Rather thread a button
on one of strands.
506
Bring the Bowdabra Bow Wire around to the back and tie
off.
507
508
Table of Contents
Ch. 1 Helpful Hints
Ch. 2 Basic Bows
Ch. 3 Pinwheel Bows
Ch. 4 Boutique Bows
Ch. 5 Loopy Bows
Ch. 6 Spiky Bows
Ch. 7 Baby Bows
Ch. 8 Pet Bows
Ch. 9 Themed Bows
Ch.10 Stacked Bows
Ch.11 Beaded Bows
Ch. 13 Resources
Cut a piece of finishing ribbon approximately twice the
width of your bow.
510
Stretch a glue dot to run thinly along the top and
bottom of the Bowdabra Wire in the center of the bow.
511
Run the finishing spray from the underneath of the bow to
the top. Knot at the top.
512
Trim the spray to desire length and seal the ends. Bow is
complete and ready to wear!
513
Bowdabra®
Morex Corp.
“Bow Maker, Favor Maker, & Craft
Tool”
“The More Exclusive Ribbon Company”
Mini Bowdabra®
Mini Bowdabra®
Hair Bow Tool &
Ruler
Bow Maker, Favor Maker, & Craft Tool
The Bowdabra is the craft tool unleashing
creativity all over the world! From
beautiful bows for gifts to elegant bridal
accessories and home décor, the crafting
possibilities are practically endless with
Bowdabra.
With its simple-to-use "goof proof" design,
the Bowdabra is made for people of all
ages; even children. Families seeking fun
and affordable activities can spend some
quality time together using the Bowdabra
to create unique crafts and wonderful
memories. The Bowdabra will inspire
amazing things from even the most
"creatively-challenged."
http://bowdabra.com
515
Offering a wide variety of decorative ribbon &
floral accessories to distributors, wholesalers
and retailers
Morex Corp is proud to be a leading provider of
decorative ribbon, offering the most extensive
line of European ribbons available in the
United States.
Morex provides:
•Excellent customer service
•Access to over 600 styles of decorative ribbon
in hundreds of colors
•Prompt delivery with more than 20,000 unique
stock items
•Market leading products
•Fresh new designs
The most extensive line of European Fashion
and Design available in the U.S. from the
fastest growing ribbon company of the new
millennium!
516
517
518
519
The Mini Bowdabra® is
perfect for making tiny
bows for scrapbooking,
card making, and more.
http://bowdabra.com
520

Hair Bow Tool & Ruler
3
1
2
521

Mini Bowdabra®

Transcription

Similar documents

Manufacturers and Importers of fun and fine party products

traditional bow

MICHELE EICHLER

TimberHawk Bows

100 Of the Best Movie Songs Ever

MAX PRO 4 (TMP4-BK) Standard Jaw - Black

Straight Shooters

Lesson 01 - The navkar mantra

TEMPLATE HOW-TO MAKE A GUM PASTE BOW

Best New Bow Sights