danley 2008:battery_chg_printing.qxd.qxd
Transcription
danley 2008:battery_chg_printing.qxd.qxd
2012 Product Reference Danley Sound Labs is proud of the fact that we make extraordinary products using fairly ordinary components. The power of our products is not in the expensive esoteric drivers, complicated cabinets or expensive signal processing. Rather, the power is that of a Superior Idea Realized. Design Principles At Danley Sound Labs we think a loudspeaker should be a neutral source that simply reproduces the amplified original signal. It should neither add nor subtract anything from the original source and have relatively flat magnitude and phase responses. Our loudspeakers do just that allowing us to have what many have described as a simple, pure, natural and uncolored sound. The perfect loudspeaker should also provide exceptional directivity and pattern control. This is defined as the ability to direct sound energy coming from the loudspeaker to the listening areas; moving it away from side walls, ceilings, floors, etc. For the best results, directivity control needs to be maintained to the lowest possible frequency. Proper pattern control also greatly assists in a loudspeaker working properly in tight packed arrays. GH-60 CLF Data About Danley Sound Labs Danley Sound Labs is the exclusive home of Tom Danley, one of the most innovative loudspeaker designers in the industry. Tom has pioneered numerous technologies which have been utilized in projects ranging from ground zero bombing simulation, active noise cancellation of jet engines, critical listening mastering studios, live sound, commercial/high-end home theatre and houses of worship around the world. Danley Mission Statement: To find favor and a good name in the sight of God and man. Proverbs 3:4 Tapped Horn - Commercial Pro Subwoofers PAGE TH 221……………………………………………………………………………………….. 1 TH 812……………………………………………………………………………………….. 2 TH 412……………………………………………………………………………………….. 3 DBH 218……………………………………………………………………………………… 4 TH 212……………………………………………………………………………………….. 5 TH 112……………………………………………………………………………………….. 6 TH 115……………………………………………………………………………………….. 7 TH 118……………………………………………………………………………………….. 8 TH MINI…………………………………………………………………………………..... 9 TH 28…………………………………………………………………………………………. 10 TH SPUD…………………………………………………………………………………….. 11 DTS 10………………………………………………………………………………………… 12 DTS 20………………………………………………………………………………………… 13 TH 50………………………………………………………………………………………….. 14 CS 30…………………………………………………………………………………………. 15 Synergy Horn - Full Range Loudspeakers JH 90..………………………………………………………………………………………. GH 60..………………………………………………………………………………………. SH 100………………………………………………………………………………………. SH 100B……………………………………………………………………………………. SH MINI…………………………………………………………………………………….. SH MICRO…………………………………………………………………………………… SH 95…………………………………………………………………………………………. SH 96…………………………………………………………………………………………. SH 64…………………………………………………………………………………………. Array-able Products SH 69…………………………………………………………………………………………. SH 60…………………………………………………………………………………………. SH 50…………………………………………………………………………………………. SH DFA……………………………….……………………………………………………… SH 46…………………………………………………………………………………………. SH 25…………………………………………………………………………………………. SM 60F……………………………………………………………………………………….. SM 60M……………………………………………………………………………………….. SM 96..……………………………………………………………………………………….. 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 Synergy Horn - Monitor Loudspeakers SH LPM………………………………………………………………………………………. 35 SH 100M…………………………………………………………………………………….. 36 DSP/Amplifiers/Accessories DSL DSP & AMPLIFIERS…………………………………………………………….. 37 TOURING COVERS & FLYWARE…………………………………………………. 38 Where to Buy / Warranty……………………………………………………………………………………. 40 Danley Vision Statement: To be the undisputed leader in loudspeaker technologies. Subwoofer Comparison Innovative Technology Danley Sound Lab subwoofer products are primarily under the Tapped Horn patent pending technology. This provides the highest output, lowest distortion, lowest frequency response, lowest group delay, in the smallest package of any other subwoofer line in the world today. Facts about our Specifications Model Danley provides you with honest, real‐world repeatable data; not marketing hype and wishful thinking specifications Please measure any of our products for yourself and you will agree thinking specifications. Please measure any of our products for yourself and you will agree. Max. SPL Mag. Response (Program) Sensitivity (‐3dB ref. SPL) Rating (Program) Dimensions (H x W x D) Weight Tapped Horn ‐ Commercial Pro Subwoofers TH 221 144 dB 109 dB 22 ‐ 180 Hz 6,000 W TH 812 152 dB 110 dB 28 ‐ 150 Hz 16,000 W TH 412 146 dB 110 dB 33 ‐ 200 Hz 8,000 W DBH 218 147 dB 112 dB 34 ‐ 300 Hz 7,200 W TH 212 139 dB 104 dB 38 ‐ 200 Hz 2,800 W TH 112 132 dB 100 dB 33 ‐ 200 Hz 800 W TH 115 140 dB 106 dB 38 ‐ 200 Hz 2,000 W TH 118 143 dB 108 dB 35 ‐ 250 Hz 3,600 W TH MINI 135 dB 101 dB 48 ‐ 200 Hz 1,400 W TH 28 132 dB 100 dB 47 ‐ 162 Hz 800W TH SPUD 126 dB 94 dB 19 ‐ 125 Hz 800 W DTS 10 133 dB 100 dB 15 ‐ 70 Hz 2,000 W DTS 20 128 dB 95 dB 18 ‐ 100 Hz 1,000 W TH 50 133 dB 97 dB 21 ‐ 70 Hz 2,000 W CS 30 127 dB 95 dB 33 ‐ 67 Hz 800 W 60 x 60 x 28 in (1524 x 1524 x 711.2 mm) 60 60 28 i 60 x 60 x 28 in (1524 x 1524 x 711.2 mm) 26.5 x 45 x 45 in (673.1 x 1143 x 1143 mm) 45 x 45 x 22.5 in (1143 x 1143 x 571.5 mm) 36 x 15 x 36 in (914.4 x 381 x 914.4 mm) 38 x 18 x 30 2 in 38 x 18 x 30.2 in (965.2 x 457.2 x 767.1 mm) 40 x 22.5 x 28.5 in (1016 x 571.5 x 723.9 mm) 40 x 22.5 x 28.5 in (1016 x 571.5 x 723.9 mm) 24 x 15 x 22.5 in (609.6 x 381 x 571.5 mm) 20 x 30 x 10.5 in (508 x 762 x 266.7 mm) 11 x 48 x 45 in (279.4 x 1219.2 x 1143 mm) 59.5 x 44 x 16 (1511.3 x 1117.6 x 406.4 mm) 87.5 x 18 x 20 in (2222.5 x 457.2 x 508 mm) 45 x 34 x 25 in (1143 x 863.6 x635 mm) 22.5 x 16.5 x 22.5 in (571.5 x 419.1 x 571.5 mm) Danley TH 221 ‐ "The Cine‐Monster" 480 lbs (217.92 kg) 584 lbs (265.13 kg) 357 lbs (162.08 kg) 277 lbs (125.76 kg) 142 lbs (64.46 kg) 142 lbs (64.4 kg) 152 lbs (68.9 kg) 160 lbs (72.6 kg) 76 lbs (34.4 kg) 61 lbs (27.6 kg) 156 lbs (70.8 kg) 285 lbs (129.4 kg) 220 lbs (99.7 kg) 240 lbs (108.9 kg) ( ) 81 lbs (36.7 kg) TAPPED HORN COMMERCIAL PRO SUBWOOFERS The TH-221, dubbed “the Cine-Monster” is the only choice for the tour/event/staging customer who wants high efficiency and 20Hz performance. Its exceptionally low bass response is also perfect for the demands of today’s HD commercial theatre or a one-of-a-kind high-end home theatre. TH-221 The “CineMonster” There is no equal… Boldly, but accurately stated – the Cine-monster has no equivalent! Specifications Operating Frequency Range................................................. 22 Hz - 180 Hz - 3 dB ........................................................................................... 18.5 Hz – 200 Hz -10dB Sensitivity @ 1M ............................................................................................109 dBSPL ........................................................................................................... 116 dBSPL @ 78 Hz ......................... (Referenced to 2.83V @1M ½ space, measured as 28.3V @ 10M) Maximum Output ................................................... ... 138 dBSPL/144 dBSPL Peak ................................................................. 145 dBSPL/151 dBSPL Peak above 78 Hz Input Power Ratings ............................... 3000 W continuous, 6000 W program Nominal Impedance .................. Single 2 ohm or 2 x 4 ohm switch selectable Minimum Impedance ........................................................................................ 2 ohms Recommended Processing................................ 20 Hz HP @ 24 dB/Butterworth Drivers ................................................................................ LF 2 x 21” Long excursion Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories Self-powered model Cabinet Dolly Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Power Rating Dimensions (in.) Weight TH 221 144 dB 109 dB 22 Hz – 180 Hz 6,000 W 60 x 60 x 28 480 lbs © 2012 Danley Sound Labs. All Rights Reserved. 1 www.danleysoundlabs.com TAPPED HORN COMMERCIAL PRO SUBWOOFERS The TH-812, also known as “the Rock-Monster” delivers extremely high sensitivity, low frequency extension, and power handling heretofore never found in a single subwoofer. TH-812 For the staging/tour customer this means dramatically fewer cabinets and amplifiers to get the desired performance which ultimately puts money in their pockets. Specifications Operating Frequency Range................................................. 28 Hz - 150 Hz - 3 dB ............................................................................................... 23 Hz – 200 Hz -10dB Sensitivity @ 1M ............................................................................................110 dBSPL ........................................................................................................... 113 dBSPL @ 97 Hz ......................... (Referenced to 2.83V @1M ½ space, measured as 28.3V @ 10M) Maximum Output ................................................... ... 146 dBSPL/152 dBSPL Peak ..................................................................................... 148 dBSPL/154 dBSPL @ 98 Hz Input Power Ratings .......................... 8,000 W continuous, 16,000 W program Nominal Impedance ................. Single 4 ohm or 2 x 8 ohm switch selectable Minimum Impedance .................................................................... 3.5 ohms @ 60 Hz Recommended Processing................................ 20 Hz HP @ 24 dB/Butterworth Drivers ................................................................................ LF 8 x 12” Long excursion The “RockMonster” when only the best will do… Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories Self-powered model Cabinet Dolly, Touring Cover Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Power Rating Dimensions (in.) Weight TH 812 152 dB 110 dB 28 Hz – 150 Hz 16,000 W 60 x 60 x 28 584 lbs © 2012 Danley Sound Labs. All Rights Reserved. 2 www.danleysoundlabs.com TAPPED HORN COMMERCIAL PRO SUBWOOFERS The TH-412 is the only choice for the tour/event/staging customer who wants high efficiency and sub 30Hz performance. There isn’t another sub on the market that offers this combination of compact size, extreme sensitivity, high power handling, and low frequency extension. Specifications Operating Frequency Range................................................. 33 Hz - 200 Hz - 3 dB ............................................................................................... 27 Hz – 200 Hz -10dB Sensitivity @ 1M ............................................................................................110 dBSPL .........................................................................................................120 dBSPL @ 200 Hz ......................... (Referenced to 2.83V @1M ½ space, measured as 28.3V @ 10M) Maximum Output ................................................... ... 140 dBSPL/146 dBSPL Peak ........................................................................ 150 dBSPL/156 dBSPL Peak @ 200 Hz Input Power Ratings ............................... 4000 W continuous, 8000 W program Nominal Impedance .................. Single 2 ohm or 2 x 4 ohm switch selectable Minimum Impedance .................................................................... 1.6 ohms @ 63 Hz Recommended Processing................................ 25 Hz HP @ 24 dB/Butterworth Drivers ................................................................................ LF 4 x 12” Long excursion TH-412 Both kinds of bass – low and loud! Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories Self-powered model Cabinet Dolly Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Power Rating Dimensions (in.) Weight TH 412 146 dB 110 dB 33 Hz – 200 Hz 8,000 W 26.5 x 45 x 45 357 lbs © 2012 Danley Sound Labs. All Rights Reserved. 3 www.danleysoundlabs.com BASS HORN COMMERCIAL PRO SUBWOOFERS The DBH-218, also known as “the Thumper” is Tom Danley’s take on a more traditional bass horn enclosure. Unlike the Tapped Horn, the DBH218’s low frequency response is extended when using multiples. Also using a pair of 18” drivers meets rider compliance issues while still yielding vastly better performance over competitive designs. DBH-218 The “Thumper” Specifications Operating Frequency Range................................................. 34 Hz - 300 Hz - 3 dB ............................................................................................... 28 Hz – 400 Hz -10dB Sensitivity @ 1M ............................................................................................112 dBSPL .........................................................................................................117 dBSPL @ 100 Hz ......................... (Referenced to 2.83V @1M ½ space, measured as 28.3V @ 10M) Maximum Output ................................................... ... 141 dBSPL/147 dBSPL Peak .................................................................................. 147 dBSPL/153 dBSPL @ 100 Hz Input Power Ratings ............................. 3,600 W continuous, 7,200 W program Nominal Impedance ................. Single 2 ohm or 2 x 4 ohm switch selectable Minimum Impedance ...................................................................... 1.8 ohm @ 40 Hz Recommended Processing................................ 25 Hz HP @ 24 dB/Butterworth Drivers ................................................................................ LF 2 x 18” Long excursion Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories Self-powered model Cabinet Dolly Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Power Rating Dimensions (in.) Weight DBH 218 147 dB 112 dB 34 Hz – 300 Hz 7,200 W 45 x 45 x 22.5 277 lbs © 2012 Danley Sound Labs. All Rights Reserved. 4 www.danleysoundlabs.com TAPPED HORN COMMERCIAL PRO SUBWOOFERS The TH-212 commercial pro subwoofer is designed for any application that needs massive punch but light weight and easy portability. Interlocking skids allow the 212 to be stacked into multiples which produce stunning output and low frequency directivity. Removable covers allow 2 choices for the location of the acoustical output – depending on the installation orientation you choose. Waterproof drivers are standard on all 212’s. TH-212 Lightweight, Easy Portability Available in both Touring and Install versions - touring version comes with handles and wheels to make it easily transportable, install version has a variety of fly-points for permanent installations. A self-powered model is also available with a built in DSP. Specifications Operating Frequency Range............................................. 38 Hz - 200 Hz +/- 3 dB .............................................................................................. 31 Hz – 200 Hz -10 dB Sensitivity @ 1M ............................................................................................104 dBSPL .............................................................................................................. (107.8dB@ 81 Hz) ......................... (Referenced to 2.83V @1M ½ space, measured as 28.3V @ 10M) Maximum Output ........................................................ ..133dBSPL/139dBSPL Peak Input Power Ratings ................................. 1400W continuous, 2800W program Nominal Impedance .......................................................................................... 4 ohms Minimum Impedance .................................................................... 3.6 ohms @ 36 Hz Recommended Processing................................ 30 Hz HP @ 24 dB/Butterworth Drivers ................................................................................ LF 2 x 12” Long excursion Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated TH-212 1024 Samples in 47.4 s, Frequency Res. = 2.0 Hz, Time Res = 499.71 ms (564.67 feet) 115 110 dB (Pascals) 105 100 95 90 85 80 Frequency (Hz) TH-212-Mod Impedence 12/5/2008 3:58:08 PM 2.83V 200 100 70 50 40 30 20 75 TH-212 Mod Impedance 2048 Samples, Frequency Res. = 2.0 Hz 35 30 Accessories Ohms 25 20 Powered version available Weatherized options available 15 10 200 Frequency (Hz) 100 70 50 40 30 20 5 PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Power Rating Dimensions (in.) Weight TH 212 139 dB 104 dB 38 Hz – 200 Hz 2,800 W 36 x 15 x 36 142 lbs © 2012 Danley Sound Labs. All Rights Reserved. 5 www.danleysoundlabs.com TAPPED HORN COMMERCIAL PRO SUBWOOFERS The TH-112 is another very compact design which combines high efficiency with solid output down to 27 Hz. The TH-112 can be used singly in installed loudspeaker systems or used in multiples for tour sound or cinema applications. TH-112 Specifications Operating Frequency Range.................................................. 33 Hz -200 Hz - 3 dB ............................................................................................... 27 Hz – 260 Hz -10dB Sensitivity @ 1M ............................................................................................100 dBSPL ........................................................................................................107.5 dBSPL @ 84 Hz ......................... (Referenced to 2.83V @1M ½ space, measured as 28.3V @ 10M) Maximum Output .................................. ... 126 dBSPL/132 dBSPL Peak @ 38 Hz .......................................................................... 133 dBSPL/139 dBSPL Peak @ 84 Hz Input Power Ratings .................................... 400 W continuous, 800 W program Nominal Impedance .......................................................................................... 8 ohms Minimum Impedance .................................................................... 5.3 ohms @ 53 Hz Recommended Processing................................ 25 Hz HP @ 24 dB/Butterworth Compact for Tour Sound or Cinema Drivers ................................................................................ LF 1 x 12” Long excursion Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated TH-112-10M 8/11/2005 2:37:57 PM outdoors 100watts@10M 1/2 space outside Cursor = 41.0 dB at 10.0 Hz (-63.0 degs) 120 TH-112 - 10M.tds TH-112 - 10M.tds Phase 8192 Samples in 15.7 s, Frequency Res. = 3.5 Hz, Time Res = 287.47 ms (324.84 feet) 45 115 dB (Pascals) 105 -45 100 95 -90 90 Phase (Degrees) 0 110 -135 85 80 -180 75 TH-112 Anywhere on Earth 3/4/2005 11:00:43 AM 1 Vrms 1mtr Cursor = 10.3 Ohms at 10.0 Hz (48.6 degs) 100 70 50 40 30 -225 20 15 70 Frequency (Hz) Octave Smoothing = 15.0% TH-112imp .imp Mag 2048 Samples, Frequency Res. = 4.0 Hz 40 35 Ohms 30 25 Accessories 20 15 Power version available Weatherized options available 10 500 400 300 200 Frequency (Hz) 100 70 50 40 30 20 10 5 PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Power Rating Dimensions (in.) Weight TH 112 132 dB 100 dB 33 Hz – 200 Hz 800 W 38 x 18 x 30.2 142 lbs © 2012 Danley Sound Labs. All Rights Reserved. 6 www.danleysoundlabs.com TAPPED HORN COMMERCIAL PRO SUBWOOFERS The TH-115 is aimed at the concert/tour professional that wants massive punch but light weight and easy portability. Interlocking skids allow the box to be stacked into multiples which produce stunning output and low frequency directivity. The TH-115 can also be installed permanently using a variety of fly-points available on the install version. Specifications Operating Frequency Range.................................................. 38 Hz -200 Hz - 3 dB ............................................................................................... 33 Hz – 280 Hz -10dB Sensitivity @ 1M ............................................................................................106 dBSPL ............................................................................................... 112 dBSPL @ 100 Hz max ......................... (Referenced to 2.83V @1M ½ space, measured as 28.3V @ 10M) Maximum Output ................................................... ... 133 dBSPL/139 dBSPL Peak ........................................................................ 139 dBSPL/145 dBSPL Peak @ 100 Hz Input Power Ratings ............................... 1000 W continuous, 2000 W program Nominal Impedance .......................................................................................... 4 ohms Minimum Impedance ....................................................................... 5 ohms @ 78 Hz Recommended Processing................................ 25 Hz HP @ 24 dB/Butterworth Drivers ................................................................................ LF 1 x 15” Long excursion Input Connections.......................................................................................... 2-NL4MP TH-115 Lightweight and Easy Portability Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories Powered version available Speaker Cover Touring or Install versions Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Power Rating Dimensions (in.) Weight TH 115 139 dB 106 dB 38 Hz – 200 Hz 2,000 W 40 x 22.5 x 28.5 152 lbs © 2012 Danley Sound Labs. All Rights Reserved. 7 www.danleysoundlabs.com TAPPED HORN COMMERCIAL PRO SUBWOOFERS Building on the success of the TH-115, the TH-118 gives you the impact of the tapped horn, just lower and louder. Massive punch but light weight and easy portability. Interlocking skids allow the box to be stacked into multiples which produce stunning output and low frequency directivity. The TH-118 can also be installed permanently using a variety of fly-points available on the install version. TH-118 Lower and Louder! Specifications Operating Frequency Range.................................................. 35 Hz -250 Hz - 4 dB ............................................................................................... 28 Hz – 300 Hz -10dB Sensitivity @ 1M ............................................................................................108 dBSPL ............................................................................................... 114 dBSPL @ 138 Hz max ......................... (Referenced to 2.83V @1M ½ space, measured as 28.3V @ 10M) Maximum Output ................................................... ... 137 dBSPL/143 dBSPL Peak ........................................................................ 143 dBSPL/149 dBSPL Peak @ 134 Hz Input Power Ratings ............................... 1800 W continuous, 3600 W program Nominal Impedance .......................................................................................... 4 ohms Minimum Impedance ....................................................................... 3 ohms @ 67 Hz Recommended Processing................................ 25 Hz HP @ 24 dB/Butterworth Drivers ................................................................................ LF 1 x 18” Long excursion Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories Powered version available Speaker Cover Touring or Install versions Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Power Rating Dimensions (in.) Weight TH 118 143 dB 108 dB 35 Hz – 250 Hz 3,600 W 40 x 22.5 x 28.5 160 lbs © 2012 Danley Sound Labs. All Rights Reserved. 8 www.danleysoundlabs.com TAPPED HORN COMMERCIAL PRO SUBWOOFERS The TH-Mini was designed with the small band/weekend warrior in mind; who in most cases must setup and tear down on their own with nothing more than a hand truck. TH-Mini Simply but boldly stated, there is no other product on the market today which matches the Mini's level of performance and fidelity in a subcompact size. Multiples may be used for bass arrays. Extremely Compact Subwoofer Specifications Operating Frequency Range................................................. 48 Hz - 200 Hz - 3 dB ................................................................................................................. 41 Hz -10dB Sensitivity @ 1M ............................................................................................101 dBSPL ......................... (Referenced to 2.83V @1M ½ space, measured as 28.3V @ 10M) Maximum Output ................................................... ... 129 dBSPL/135 dBSPL Peak Input Power Ratings ................................. 700 W continuous, 1400 W program Nominal Impedance .......................................................................................... 8 ohms Minimum Impedance ....................................................................... 7 ohms @ 50 Hz Recommended Processing................................ 40 Hz HP @ 24 dB/Butterworth Drivers ................................................................................ LF 1 x 12” Long excursion Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated TH-MINI 2.8V.tds TH-MINI 2.8V.tds.phase 4096 Samples in 16.6 s, Frequency Res. = 7.1 Hz, 120 Time Res = 141.52 ms (159.91 feet) 450 405 360 315 270 225 180 135 90 45 115 dB (Pascals) 110 105 100 95 90 85 0 80 Frequency (Hz) TH-MINI impedance Gainesville GA 1/29/2007 8:42:53 AM Outside 200 100 70 50 40 30 75 70 Phase (Degrees) TH-MINI 12/10/2007 1:21:54 PM Cursor = 89.6 dB @ 38.2 Hz (-21.8 degs) -45 -90 -135 -180 TH-MINI.imp Mag 4096 Samples, Frequency Res. = 2.0 Hz 90 80 Ohms 70 60 Accessories 50 40 Available Touring or Install Weatherized options available 30 20 100 200 70 50 40 30 20 10 Model Max SPL Sensitivity Magnitude Response Power Rating Dimensions (in.) Weight TH MINI 135 dB 101 dB 48 Hz – 200 Hz 1,400 W 24 x 15 x 22.5 76 lbs Frequency (Hz) PERFORMANCE DATA © 2012 Danley Sound Labs. All Rights Reserved. 9 www.danleysoundlabs.com TAPPED HORN COMMERCIAL PRO SUBWOOFERS The TH-28 is an extremely compact subwoofer that can easily be hidden under a step or stage. It will produce 124 dB @ 45Hz yet is only 10.5" high! The TH-28 features an interchangeable port/grill that allows for vertical or horizontal installations. Multiples may be used for bass arrays. Specifications Operating Frequency Range................................................. 47 Hz - 162 Hz - 3 dB ............................................................................................... 38 Hz – 180 Hz -10dB Sensitivity @ 1M ............................................................................................100 dBSPL ......................... (Referenced to 2.83V @1M ½ space, measured as 28.3V @ 10M) Maximum Output ................................................... ... 126 dBSPL/132 dBSPL Peak Input Power Ratings .................................... 400 W continuous, 800 W program Nominal Impedance .......................................................................................... 8 ohms Minimum Impedance .................................................................... 8.2 ohms @ 45 Hz Recommended Processing................................ 45 Hz HP @ 24 dB/Butterworth Drivers ...................................................................................LF 2 x 8” Long excursion TH-28 Extremely Compact Subwoofer Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated TH-28-10M 8/11/2005 2:57:26 PM outdoors 100watts@10M 1/2 space outside Cursor = 53.8 dB at 10.0 Hz (20.3 degs) 120 TH-28-10M.tds Phase 45 90 100 -135 95 -180 90 -225 85 -270 80 -315 75 -360 70 -405 100 105 70 45 50 0 110 40 115 30 dB (Pascals) TH-28-10M.tds 8192 Samples in 15.7 s, Frequency Res. = 3.5 Hz, Time Res = 287.47 ms (324.84 feet) Frequency (Hz) Octave Smoothing = 15.0% TH-28 Anywhere on Earth 3/4/2005 11:26:52 AM Cursor = 24.7 Ohms at 59.8 Hz (48.6 degs) TH-28 imp.imp Mag 2048 Samples, Frequency Res. = 4.0 Hz 70 60 Ohms 50 40 Accessories 30 20 Powered version available Weatherized options available 500 400 300 200 100 70 50 40 30 20 10 10 Frequency (Hz) PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Power Rating Dimensions (in.) Weight TH 28 132 dB 100 dB 47 Hz – 162 Hz 800 W 20 x 30 x 10.5 61 lbs © 2012 Danley Sound Labs. All Rights Reserved. 10 www.danleysoundlabs.com TAPPED HORN – COMMERCIAL PRO SUBWOOFERS Designed with all of you “couch potatoes” in mind, the TH SPUD subwoofer can easily be installed under or behind the seating in your home theatre due to its 11” depth. The SPUD is capable of producing incredibly deep bass that you can “feel” with a flat response all the way down to 17 Hz while handling 800 watts. The TH SPUD has removable covers that allow 3 choices for the location of the acoustical output - depending on then installation method you choose. An optional steel grill is available upon request. TH-Spud Couch Subwoofer Specifications Operating Frequency Range................................................ 19 Hz – 125 Hz - 3 dB ................................................................................................................. 17 Hz -10dB Sensitivity @ 1M .............................................................................................. 94 dBSPL ......................... (Referenced to 2.83V @1M ½ space, measured as 28.3V @ 10M) Maximum Output ......................................................................... ... 126 dBSPL Peak Input Power Ratings ................................... 400 W continuous, 800 W program Nominal Impedance .......................................................................................... 8 ohms Minimum Impedance ...................................................................................................... Recommended Processing................................ 15 Hz HP @ 24 dB/Butterworth Drivers ...................................................................................LF 2 x 8” Long excursion Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories Powered version available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Power Rating Dimensions (in.) Weight TH SPUD 126 dB 94 dB 19 Hz – 125 Hz 800 W 11 x 48 x 45 156 lbs © 2012 Danley Sound Labs. All Rights Reserved. 11 www.danleysoundlabs.com TAPPED HORN – COMMERCIAL PRO SUBWOOFERS DTS-10, the latest in the “monster” category of Danley subs. It is the reference standard high definition cinema subwoofer with an unheard of output down to 10 Hz, having at least twice the power of the renown DTS-20. Originally produced as an industry first “do-it-yourself” subwoofer kit, the new and improved DTS-10 is now a regular member of our product line. It makes an outstanding home theatre solution and is guaranteed to make any home theatre enthusiast drool! DTS-10 High Definition Sub Solid Bass to 10 Hz! Specifications Operating Frequency Range.....................................................15 Hz - 70 Hz -3 dB ................................................................................................................. 12 Hz -10dB Sensitivity @ 1M ............................................................... 100 dBSPL (15 Hz - 70Hz) ......................................................................... (Referenced to 2.83V @1M ½ space) Maximum Output ................................................... ... 127 dBSPL/133 dBSPL Peak Input Power Ratings ............................... 1000 W continuous, 2000 W program Nominal Impedance .......................................................................................... 4 ohms Minimum Impedance .................................................................... 2.6 ohms @ 31 Hz Recommended Processing................................ 10 Hz HP @ 24 dB/Butterworth Drivers ................................................................................ LF 2 x 12” Long excursion Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories Powered version available Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Power Rating Dimensions (in.) Weight DTS 10 133 dB 100 dB 15 Hz – 70 Hz 2000 W 59.5 x 44 x 16 285 lbs © 2012 Danley Sound Labs. All Rights Reserved. 12 www.danleysoundlabs.com TAPPED HORN – COMMERCIAL PRO SUBWOOFERS The DTS-20, a.k.a. “The Tower of Power”, is simply the most powerful, lowest frequency reproducing subwoofer on the planet. Solid output down to 16 Hz, single digit distortion and incomparably low group delay put this amazing subwoofer in a class by itself. DTS-20 The Tower of Power has removable covers that allow 2 choices for the location of the acoustical output – depending on the installation orientation you choose. The Tower of Power Specifications Operating Frequency Range.................................................... 18 Hz-100 Hz -3 dB ................................................................................................................. 16 Hz -10dB Sensitivity @ 1M .......................................................... 95 dBSPL (-1dB 20Hz -70Hz) ......................... (Referenced to 2.83V @1M ½ space, measured as 28.3V @ 10M) Maximum Output ................................................... ... 122 dBSPL/128 dBSPL Peak Input Power Ratings ................................. 500 W continuous, 1000 W program Nominal Impedance .......................................................................................... 8 ohms Minimum Impedance .................................................................... 5.4 ohms @ 40 Hz Recommended Processing................................ 15 Hz HP @ 24 dB/Butterworth Drivers ................................................................................ LF 1 x 12” Long excursion Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated DTS-20 QMSMod 4/20/2006 3:11:08 PM outdoors DTS-20 QMSMod DTS-20 QMSMod Phase 8192 Samples in 15.8 s, Frequency Res. = 305 Hz, Time Res = 287.47 ms (324.84 feet) 105 450 405 100 360 dB (Pascals) 270 225 90 180 135 85 Phase (Degrees) 315 95 90 45 80 0 -45 75 -90 100 70 50 40 30 20 -135 15 70 Frequency (Hz) PB-12 impedance Gainesville GA 4/18/2005 3:39:27 PM Cursor = 48.8 Ohms at 1000.0 Hz (72.2 degs) PB-12 impedance Mag 2048 Samples, Frequency Res. = 8.0 Hz 45 40 35 Ohms 30 25 Accessories 20 15 Powered version available Weatherized options available 10 700 500 400 300 1000 Frequency (Hz) 200 100 70 50 40 30 20 10 5 PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Power Rating Dimensions (in.) Weight DTS 20 128 dB 95 dB 18 Hz – 100 Hz 1,000 W 87.5 x 18 x 20 220 lbs © 2012 Danley Sound Labs. All Rights Reserved. 13 www.danleysoundlabs.com FRONT LOADED – COMMERCIAL PRO SUBWOOFERS The CS30 (Compact Subwoofer 30 Hz response) combines high sensitivity with very low frequency cutoff in a sub-compact package. CS-30 (Available in both Touring and Install versions) Specifications Operating Frequency Range.....................................................33 Hz -67 Hz - 3 dB ................................................................................................... 27 - 150 Hz -10dB Sensitivity @ 1M ..................................................... 95 dBSPL (±1dB 33 Hz - 67 Hz) ......................... (Referenced to 2.83V @1M ½ space, measured as 28.3V @ 10M) Maximum Output ................................................... ... 121 dBSPL/127 dBSPL Peak Input Power Ratings .................................... 400 W continuous, 800 W program Nominal Impedance .......................................................................................... 8 ohms Minimum Impedance .................................................................... 6.5 ohms @ 30 Hz Recommended Processing................................ 25 Hz HP @ 24 dB/Butterworth World’s smallest subwoofer with commercial output to 30 Hz Drivers ................................................................................ LF 1 x 12” Long excursion Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories Powered version available Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Power Rating Dimensions (in.) Weight CS 30 127 dB 95 dB 33 Hz – 67 Hz 800 W 24 x 15 x 22.5 83 lbs © 2012 Danley Sound Labs. All Rights Reserved. 14 www.danleysoundlabs.com TAPPED HORN – COMMERCIAL PRO SUBWOOFERS The TH-50 is a perfect choice for the customer who wants high efficiency and solid 20 Hz performance. Unrivaled efficiency and high sensitivity of 97dB @ 23 Hz coupled with power handling of 2,000 watts are just a few of the reasons the TH-50 is the subwoofer of choice for many applications. TH-50 Solid 20 Hz Performance Specifications Operating Frequency Range......................................................21Hz -70 Hz - 3 dB ................................................................................................. 18Hz – 200Hz -10dB Sensitivity @ 1M .............................................................................................. 97 dBSPL ........................................................................................................... 104 dBSPL @ 63 Hz .............. (Referenced to 2.83V @1M ½ space, measured as 28.3V @ 10M Maximum Output ................................................... ... 127 dBSPL/133 dBSPL Peak .......................................................................... 134 dBSPL/137 dBSPL Peak @ 63 Hz Input Power Ratings ............................... 1000 W continuous, 2000 W program Nominal Impedance .......................................................................................... 8 ohms Minimum Impedance ....................................................................... 5 ohms @ 25 Hz Recommended Processing................................ 15 Hz HP @ 24 dB/Butterworth Drivers ................................................................................ LF 1 x 15” Long excursion Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated TH-50 sub 2/28/2006 3:32:40 PM Cursor = 97.2 dB @ 40.2 Hz (-97.3 degs) TH-50 sub2.tds TH-50 sub2.tds Phase 110 100 0 -100 -200 -300 -400 -500 dB (Pascals) 105 100 95 90 85 80 -600 -700 -800 -900 75 70 Frequency (Hz) TH-50 sub 03/06/2007 4:52:37 PM Cursor = 5.0 dB at 52.1 Hz (16.9 degs) 150 100 70 50 40 30 20 15 65 Phase (Degrees) 4096 Samples in 46.0 s, Frequency res = 2.0 Hz, Time Res = 498.41 ms (563.21 feet) TH-50 sub. imp Mag 2048 Samples, Frequency res = 2.0Hz 20 18 16 Phase (Degrees) Ohms 14 12 10 Accessories 8 Powered version available Weatherized options available 6 100 70 50 40 30 20 10 4 Frequency (Hz) PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Power Rating Dimensions (in.) Weight TH 50 133 dB 97 dB 21 Hz – 70 Hz 2,000 W 45 x 34 x 25 240 lbs © 2012 Danley Sound Labs. All Rights Reserved. 15 www.danleysoundlabs.com Full Range Comparison Innovative Technologies Danley Sound Lab Full Range Loudspeaker products utilize the patent-pending Synergy Horn technology which allows multiple drivers to seamlessly combine into a single horn. Model Max. SPL Mag. Response Rating (Program) Sensitivity (‐3dB ref. SPL) (Program) Dimensions (H x W x D) Weight Beamwidth (Hor x Ver) 720 lbs (326.9 kg) 90° x 40° 199 lbs (90.3 kg) 60° x 45° SA 45 lbs (20.4 kg) 110° conical 135 lbs (61.2 kg) 110° conical 22.5 lbs (10.2 kg) 100° conical 23 lbs (10.4 kg) 90° x 90°/15° DA 53 lbs (21.7 kg) 95° x 55° 215 lbs (97.61 kg) 90° x 60° 197 lbs (89.4 kg) 60° x 40° 116 lbs (52.6 kg) 60° x 90° 127 lbs (57.6 kg) 60° x 60° 133 lbs (60.4 kg) 50° x 50° 69 lbs (29.4 kg) (50° x 100°) x 50° 118 lbs (52.6 kg) 40° x 60° 176 lbs (79.8 kg) 25° x 25° 50 lbs (22.7 kg) 60° x 60° 45 lbs (20.4 kg) 60° x 60° 73 lbs (33.1 kg) 90° x 60° 41 lbs (18.6 kg) 110° conical 41 lbs (18.6 kg) 110° conical Synergy Horn ‐ Full Range Loudspeakers JH 90 150 dB 115 dB 50 Hz ‐ 22 kHz see spec 60 x 45 x 28 in sheet (1524 x 1143 x 711.2 mm) 48 x 30 x 23 in GH 60 139 dB 104 dB 90 Hz ‐ 16 kHz 2,800 W (1,219.2 x 762 x 584.2 mm) 20.5 x 20.5 x 9 in SH 100 126 dB 95 dB 70 Hz ‐ 20 kHz 600 W (520.7 x 520.7 x 228.6 mm) 33.5 x 20.5 x 19 in SH 100B 130 db 98 dB 50 Hz ‐ 17 kHz 1600 W (850.9 x 520.7 x 482.6 mm) 10 x 10 x 10.5 in SH MINI 117 dB 88 dB 125 Hz ‐ 18 kHz 400 W (254 x 254 x 266.7 mm) SH MICRO 119 dB 92 dB 100 Hz ‐ 15 kHz 240 W (457.2 x 203.2 x 317.5 mm) 18 x 8 x 12.5 in 14.5 x 24 x 15 in SH 95 126 dB 97 dB 91 Hz ‐ 20 kHz 800 W (368.3 x 609.6 x 381 mm) 26.5 x 45 x 25 in SH 96 139 dB 101 dB 50 ‐ 16 kHz 2,800 W (673.1 x 1,143 x 635 mm) SH 64 141 dB 103 dB 65 Hz ‐ 16 kHz 2,800 W (673.1 x 863.6 x 635 mm) 26.5 x 34 x 25 in 34 x 21 x 17 in SH 69 132 dB 99 dB 55 Hz ‐ 18 kHz 2000 W (863.6 x 533.4 x 431.8 mm) 28 x 28 x 22 in SH 60 133 dB 100 dB 48 Hz ‐ 18 kHz 2000 W (711.2 x 711.2 x 558.8 mm) 28 x 28 x 25.5 in SH 50 133 dB 100 dB 50 Hz ‐ 18 kHz 2000 W (711.2 x 711.2 x 647.7 mm) 12 x 28 x 25.5 in SH DFA 128 dB 96 dB 350 Hz ‐ 18 kHz 800 W (304.8 x 711.2 x 647.7 mm) 29 x 22.3 x 22.7 in SH 46 141 dB 106 dB 58 Hz ‐ 16 kHz 2,800 W (736.6 x 566.4 x 576.6 mm) 28 x 28 x 50.7 in SH 25 143 dB 110 dB 90 Hz ‐ 18 kHz 2,000 W (711.2 x 711.2 x 1,287.8 mm) SM 60F 131 dB 99 dB 66 Hz ‐ 24 kHz 1,600 W (523.2 x 523.2 x 414 mm) 20.6 x 20.6 x 16.3 in 20.6 x 20.6 x 16.3 in SM 60M 130 dB 100 dB 270 Hz ‐ 15 kHz 500 W (523.2 x 523.2 x 414 mm) 31.5 x 21 x 15.5 in SM 96 130 dB 98 dB 55 Hz ‐ 24 kHz 1,600 W (800.1 x 533.4 x 393.7 mm) 95 dB 60 Hz ‐ 20 kHz 600 W (345.4 x 546.1 x 457.2 mm) Synergy Horn ‐ Monitors 13.6 x 21.5 x 18 in SH LPM 126 dB 13.5 x 20.7 x 16 in SH 100M 126 dB 95 dB 70 Hz ‐ 20 kHz 600 W (342.9 x 525.8 x 406.4 mm) 16 SYNERGY HORN FULL RANGE LOUDSPEAKERS The JH-90 “Jericho Horn” is simply the most accurate powerful loudspeaker ever created. A single cabinet can produce quality audio well beyond 1000’ from a true full range point source housing; six 18" drivers, six - 6” mid range drivers and three 1.4” coaxial high frequency drivers. Based on the required coverage distance, the Jericho Horn is available with or without Danley’s patent pending shaded amplitude lens technology. Specifications Coverage Pattern .............. 90° horizontal x 40° vertical (0° on axis, 40°down -6dB) Operating Frequency Range............................................. 47 Hz - 18 kHz +/- 3 dB ............................................................................................... 37Hz – 24 kHz -10 dB Maximum Output ................................... ..148dBSPL Cont., 151 dBSPL Program Recommended Amplifier Power: LOWS: Quantity of six 4 ohm loads – either 6 x 2-3K watts @ 4 ohm or 3 x 4-6K watts @ 2 ohm amp channels MIDS: Single 6.5 ohm load – 1200-2000 watts @ 4 ohms MID HI: Single 2.7 ohm load – 600-1200 watts @ 2 ohms HIGH: Single 3 ohm load – 400-600 watts @ 2 ohms Recommended Processing............................................. DSL exclusive processor Drivers ......................................................... LF 6 x 18”, MF 6 x 6”, HF 3 x coaxial HF Input Connections............................ 19-pin Male Socapex Lighting connector JH-90 The loudest reference monitor ever created! Enclosure Material ...................................... 24mm Baltic Birch, polyurea coated Accessories Power package available JH90-OFW Outer Fly-ware Cabinet dolly, Touring Cover Weatherized options PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight JH 90 150 dB Band dependent 45 Hz – 18kHz 90° x 40° See above 60” x 45” x 28” 720 lbs © 2012 Danley Sound Labs. All Rights Reserved. 17 www.danleysoundlabs.com SYNERGY HORN FULL RANGE LOUDSPEAKERS The Genesis Horn incorporates 3 patent pending technologies: Synergy Horn, Paraline and Shaded Amplitude Lens. The box houses a total of 18 drivers utilizing 21 horizontal 20° downward vanes that provide even frontto-back coverage Line array performance from a single point source. *Due to the Shaded Amplitude Lens, the GH-60 has 16 dB of gain on the furthest listener’s axis and all 45° of the vertical coverage is useable. This technology made possible by the Synergy Horn is certain to lead a paradigm shift in loudspeaker history. GH-60 Everything you wanted a line array to do and more! Specifications Coverage Pattern ................................................ 60° horizontal x 45° SA vertical* Operating Frequency Range............................................................. 90 Hz – 16 kHz ........................................................................................................................................ Sensitivity @ 1M ............................................................................................104 dBSPL ............................................................ (Measured as 2.83V input, 1M whole space) Maximum Output .................................. ..133 dBSPL Cont., 139 dBSPL Program Input Power Ratings .............................. 1400 W continuous, 2800 W program Nominal Impedance .......................................................................................... 4 ohms Minimum Impedance ...................................................................... 3 ohms @ 2 kHz Recommended Processing................................ 80 Hz HP @ 24 dB/Butterworth Drivers ....................................................................... LF 8 x 6.5”, MF 8 x 4”, HF 2 x 1” Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories Powered version available Mounting brackets for array MB 50 Fly-ware Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight GH 60 139 dB 104 dB 90 – 16kHz 60° x 45° SA 2,800 W 48 x 30 x 23 199 lbs © 2012 Danley Sound Labs. All Rights Reserved. 18 www.danleysoundlabs.com SYNERGY HORN FULL RANGE LOUDSPEAKERS The SH-100 full range loudspeaker is a two-way Synergy Horn. When broader dispersion is needed this device handles the job flawlessly. It is an excellent choice for distributed systems due to its superior pattern control, frequency response and overall fidelity. Pole cup allows for portability and fits most tripods. Specifications Coverage Pattern ...................................................................................... 110° conical Operating Frequency Range............................................. 70 Hz - 20 kHz +/- 3 dB .............................................................................................. 50 Hz – 24 kHz -10 dB Sensitivity @ 1M .............................................................................................. 95 dBSPL ............................................................ (Measured as 2.83V input, 1M whole space) Maximum Output ................................... ..120 dBSPL Cont.,126 dBSPL Program Input Power Ratings ...................................... 300W continuous, 600W program Nominal Impedance .......................................................................................... 8 ohms Minimum Impedance ....................................................................... 5 ohms @ 7 kHz Recommended Processing................................ 70 Hz HP @ 24 dB/Butterworth Drivers ......................................................................................................... 1 x 8” coaxial Input Connections.......................................................................................... 2-NL4MP SH-100 Wide dispersion with high fidelity and great pattern control Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated dB (Pascals) SH-100productionpdf.tds SH-100productionpdf.tds Phase 8192 Samples in 40.0 s, Frequency Res. = 22.3 Hz, Time Res = 44.77 ms (50.59 feet) 120 90 115 45 110 0 105 -45 -90 100 -135 95 -180 90 Phase (Degrees) SH-100productionpdf 8/29/2005 11:35:26 AM dB Shop 2 meters 4 watts outdoors at 10' away Cursor = 75.0 dB at 50.0 Hz (-15.3 degs) -225 Frequency (Hz) Octave Smoothing = 15.0% 20000 10000 7000 5000 4000 3000 2000 1000 700 500 400 -405 300 70 200 -360 100 -315 75 70 -270 80 50 85 SH-100 .imp Mag SH-100 2/27/2008 3:41:35 4096 Samples, Frequency Res. = 28.9Hz 25 Ohms 20 Accessories 15 Powered version available U-Bracket & Swivel adapter Weatherized options available 10 20000 10000 7000 5000 4000 3000 2000 1000 700 500 400 300 200 100 70 50 40 5 Frequency (Hz) PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SH 100 126 dB 95 dB 70 Hz – 20 kHz 110° conical 600 W 20.5 x 20.5 x 9 45 lbs © 2012 Danley Sound Labs. All Rights Reserved. 19 www.danleysoundlabs.com SYNERGY HORN FULL RANGE LOUDSPEAKERS The SH-100B gives you the additional power of a tapped horn wrapped around an SH-100. With the incredibly tight low end response one loudspeaker per side, with or without subwoofers, will do an amazing job of covering a substantial seating area. The touring version can easily be transported and set up by a one man crew. Specifications Coverage Pattern ...................................................................................... 110° conical Operating Frequency Range............................................. 50 Hz - 17 kHz +/- 3 dB .............................................................................................. 30 Hz – 24 kHz -10 dB Sensitivity @ 1M .............................................................................................. 98 dBSPL ............................................................ (Measured as 2.83V input, 1M whole space) Maximum Output ................................... ..124 dBSPL Cont.,130 dBSPL Program Input Power Ratings ................................... 800W continuous, 1600W program Nominal Impedance .......................................................................................... 4 ohms Recommended Processing................................ 35 Hz HP @ 24 dB/Butterworth Drivers ....................................................... LF 4 x 8” Long excursion, 1 x 8” coaxial Input Connections.......................................................................................... 2-NL4MP SH-100B A Tapped Horn wrapped around an SH-100 Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated 120 SH-100B Productionpdf 10/31/2006 9:20:37 AM mic in test chamber SH-100B Productionpdf .tds SH-100B Productionpdf .tdsPhase 8192 Samples in 20.0 s, Frequency Res. = 31.6 Hz, Time Res = 31.67 ms (35.79 feet) 360 315 115 270 225 180 135 105 90 100 45 95 -45 0 Phase (Degrees) dB (Pascals) 110 -90 90 -135 -180 85 -225 SH-100B Productionpdf Danley Shop 10/31/2006 9:34:30 AM mic in test chamber Cursor = 6.7 dB at 20.0 Hz (degs) 20000 7000 Frequency (Hz) Octave Smoothing = 15.0% 10000 5000 4000 3000 2000 700 1000 500 400 300 200 70 100 50 40 30 -270 20 80 SH-100B Productionpdf .imp Mag 8192 Samples, Frequency Res. = 19.5Hz 14 12 dB (Pascals) 10 8 Accessories 6 Powered version available U-Bracket & Swivel Adapter Weatherized options available 20000 Frequency (Hz) 10000 7000 5000 4000 3000 2000 1000 700 500 400 300 200 100 70 50 40 30 2 20 4 PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SH 100B 130 dB 98 dB 50 Hz – 17 kHz 110° conical 1,600 W 20.5 x 33.5 x 19 135 lbs © 2012 Danley Sound Labs. All Rights Reserved. 20 www.danleysoundlabs.com SYNERGY HORN FULL RANGE LOUDSPEAKERS The SH-Mini is a full range compact loudspeaker designed for applications requiring wide coverage (100° conical). With its ultra compact size it also can be used as a very compact floor monitor with exceptional clarity. Integrated flypoints are standard and with the optional U bracket, flexible mounting options abound. The SH-Mini is ideal for applications such as under balcony, side, front, or down fill loudspeakers. The SH-Mini also makes an excellent loudspeaker for home theatre applications. SH-MINI Tiny Size, Huge Fidelity Specifications Coverage Pattern ...................................................................................... 100° conical Operating Frequency Range........................................... 125 Hz -18 kHz +/- 3 dB .............................................................................................. 88 Hz – 20 kHz -10 dB Sensitivity @ 1M .............................................................................................. 88 dBSPL ............................................................(Measured as 2.83V input, 1M whole space) Maximum Output .................................. ..111 dBSPL Cont., 117 dBSPL Program Input Power Ratings .................................... 200 W continuous, 400 W program Nominal Impedance .......................................................................................... 8 ohms Minimum Impedance ............................................................... 5.2 ohms @ 206 kHz Recommended Processing.............................. 100 Hz HP @ 24 dB/Butterworth Drivers ......................................................................................................... 1 x 8” coaxial Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated SH-Mini.tds SH-Mini.tds Phase 1024 Samples in 70.1 s, Frequency Res. = 13.9 Hz, Time Res = 59.23 ms (66.93 feet) 180 90 100 45 0 95 -45 -90 90 -135 20000 10000 7000 5000 4000 3000 2000 1000 700 70 50 70 500 -270 -315 400 -225 75 300 -180 80 200 85 Phase (Degrees) 135 105 100 dB (Pascals) 110 Frequency (Hz) Octave Smoothing = 18.0% SH Mini. impedence 2048 Samples, Frequency res = 44.9 Hz 25 Ohms 20 Accessories 15 U-Bracket Weatherized options available 10 20000 10000 7000 5000 4000 3000 2000 1000 700 500 400 300 200 100 70 50 5 Frequency (Hz) PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SH Mini 117 dB 88 dB 125 Hz – 18 kHz 100° conical 400 W 10 x 10 x 10.5 22.5 lbs © 2012 Danley Sound Labs. All Rights Reserved. 21 www.danleysoundlabs.com SYNERGY HORN FULL RANGE LOUDSPEAKERS The SH-Micro is an ultra low profile Synergy Horn. Use it anywhere you need great audio in a loudspeaker package that is less than 7" tall. Applications include under balcony fill and home theater mains or surrounds. Each cabinet houses 2 - 5.5" woofers and 1 – 4.5" full range loudspeaker. Specifications SH-Micro Ultra-low profile Synergy Horn Coverage Pattern ........................ 90° horizontal x 90° vertical/15° down angle Operating Frequency Range.......................................... 100 Hz - 15 kHz +/- 3 dB .............................................................................................. 65 Hz – 16 kHz -10 dB Sensitivity @ 1M .............................................................................................. 92 dBSPL ................................................................ (Measured as 2.83V input, 1M half space) Maximum Output .................................. ..113 dBSPL Cont., 119 dBSPL Program Input Power Ratings .................................... 120 W continuous, 240 W program Nominal Impedance .......................................................................................... 8 ohms Minimum Impedance ............................................................... 5.3 ohms @ 2500 Hz Recommended Processing................................ 90 Hz HP @ 24 dB/Butterworth Drivers ..........................................................................LF 2 x 5.5”, Full range 1 x 4.5” Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories U-Bracket Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SH Micro 119 dB 92 dB 100 Hz – 15 kHz 90° x 90°/15° DA 240 W 18 x 8 x 12.5 23 lbs © 2012 Danley Sound Labs. All Rights Reserved. 22 www.danleysoundlabs.com SYNERGY HORN FULL RANGE LOUDSPEAKERS The SH-95 – high fidelity and sensitivity in a very compact enclosure. Perfect for down fill, front fill or delay applications. Add subs and you have amazing compact system with a highly requested 95° x 55° coverage pattern. SH-95 Pole cup allows for portability and fits most tripods. Available in both Touring and Install versions The Sound of an SH50 in a smaller package *New* - now available in 4 or 16 ohm models. Specifications Coverage Pattern ......................................................... 95° horizontal x 55° vertical Operating Frequency Range............................................. 91 Hz - 20 kHz +/- 6 dB .............................................................................................. 55 Hz – 24 kHz -10 dB Sensitivity @ 1M .............................................................................................. 97 dBSPL ............................................................ (Measured as 2.83V input, 1M whole space) Maximum Output ................................... ..120 dBSPL Cont.,126 dBSPL Program Input Power Ratings ...................................... 400W continuous, 800W program Nominal Impedance .......................................................................................... 4 ohms Minimum Impedance ........................................................................................ 3 ohms Recommended Processing................................ 91 Hz HP @ 24 dB/Butterworth Drivers ............................................................................................... LF 2 x 8”, HF 1 x 1” Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated SH-95.tds SH-95.tds Phase 4096 Samples in 60.1 s, Frequency Res. = 18.2 Hz, Time Res = 54.86 ms (61.99 feet) 120 115 225 180 135 90 45 0 90 -45 -90 Frequency (Hz) Octave Smoothing = 18.0% 10000 7000 5000 4000 3000 2000 1000 700 500 400 300 200 100 70 -135 -180 50 40 85 80 75 70 Accessories Powered version available U-Bracket & Swivel Adapter Weatherized options available 20000 dB (Pascals) 110 105 100 95 Phase (Degrees) SH-95 7/16/2008 10:04:09 AM PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SH 95 126 dB 97 dB 91 Hz – 20 kHz 95° x 55° 800 W 24 x 14.5 x 15 58 lbs © 2012 Danley Sound Labs. All Rights Reserved. 23 www.danleysoundlabs.com SYNERGY HORN FULL RANGE LOUDSPEAKERS Our SH 96 was initially designed as a request of commercial theatre; this 3way powerhouse has 11 drivers in a single horn! Unlike the flagship SH 50, which possesses a 50° x 50° beam width, the SH 96 has a much wider 90° x 60° beam width. Available in both Touring and Install versions - touring version comes with handles and wheels to make it easily transportable. Specifications SH-96 Single box solution for high output and wide coverage Coverage Pattern .........................................................90° horizontal x 60° vertical Operating Frequency Range............................................. 50 Hz - 16 kHz +/- 3 dB ........................................................................................................................................ Sensitivity @ 1M ............................................................................................101 dBSPL ............................................................ (Measured as 2.83V input, 1M whole space) Maximum Output .................................. ..133 dBSPL Cont., 139 dBSPL Program Input Power Ratings ................................... 1400 W continuous, 2800 program Nominal Impedance ......................................................................................... 8 ohms Minimum Impedance .......................................................................................... ohms Recommended Processing................................ 40 Hz HP @ 24 dB/Butterworth Drivers ..................................................................... LF 4 x 15”, MF 6 x 4”, HF 1 x 1.4” Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories Powered version available Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SH 96 139 dB 101 dB 50 – 16 kHz 90° x 60° 2,800 W 26.5 x 45 x 25 215 lbs © 2012 Danley Sound Labs. All Rights Reserved. 24 www.danleysoundlabs.com SYNERGY HORN FULL RANGE LOUDSPEAKERS The SH-64, a standalone solution which works anywhere great fidelity, low frequency pattern control and unrivaled Magnitude/phase response are required. For high SPL and low distortion sound reproduction. A 3-way powerhouse with 9 drivers in a single horn! Available in both Touring and Install versions - touring version comes with handles and wheels to make it easily transportable. Specifications Coverage Pattern ........................................................ 60° horizontal x 40° vertical Operating Frequency Range........................................... 65 Hz – 16 kHz +/- 3 dB ............................................................................................. 43 Hz – 20 kHz -10 dB Sensitivity @ 1M ........................................................................................... 103 dBSPL ............................................................ (Measured as 2.83V input, 1M whole space) Maximum Output ................................. .. 135 dBSPL Cont., 141 dBSPL Program Input Power Ratings ............................... 1400 W continuous, 2800 W program Nominal Impedance .......................................................................................... 8 ohms Minimum Impedance ................................................................. 7.3 ohms @ 455 Hz Recommended Processing................................ 40 Hz HP @ 24 dB/Butterworth SH-64 A single box solution for high output, narrower coverage requirements Drivers ..................................................................... LF 4 x 15”, MF 4 x 4”, HF 1 x 1.4” Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories Powered version available Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SH 64 138 dB 103 dB 65 Hz – 16 kHz 60° x 40° 2,800 W 26.5 x 34 x 25 197 lbs © 2012 Danley Sound Labs. All Rights Reserved. 25 www.danleysoundlabs.com SYNERGY HORN FULL RANGE LOUDSPEAKERS The SH‐69 ‐ A very flexible design offering seamless arrays in the 60° horizontal orientation and when rotated 90°, a 90 x 60 pattern ‐ true full range performance in an overall compact design. A single box houses 2 ‐ 12" woofers, 6 – 4” midrange and a 1” high frequency driver. SH-69 Affordable One-Box Solution Specifications Coverage Pattern .........................................................60° horizontal x 90° vertical Operating Frequency Range............................................. 55 Hz - 18 kHz +/- 3 dB .............................................................................................. 33 Hz – 24 kHz -10 dB Sensitivity @ 1M .............................................................................................. 99 dBSPL ............................................................ (Measured as 2.83V input, 1M whole space) Maximum Output .................................. ..126 dBSPL Cont., 132 dBSPL Program Input Power Ratings ................................. 1000W continuous, 2000W program Nominal Impedance .......................................................................................... 4 ohms Minimum Impedance .................................................................................... 3.5 ohms Recommended Processing................................ 50 Hz HP @ 24 dB/Butterworth Drivers ......................................................................... LF 2 x 12”, MF 6 x 4” HF 1 x 1” Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories Powered version available Mounting bracket for array MB 50 Fly-ware Speaker Cover Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SH 69 132 dB 99 dB 55 Hz – 18 kHz 60° x 90° 2,000 W 34 x 21 x 17 116 lbs © 2012 Danley Sound Labs. All Rights Reserved. 26 www.danleysoundlabs.com SYNERGY HORN FULL RANGE LOUDSPEAKERS The SH-60 – a 60° version of our flagship SH-50 Synergy Horn featuring seamless arraying and true full range performance down to 50Hz along with great low frequency pattern control and high output. One box houses 2 - 12" drivers, 6 - 4” mids and a 1” high frequency driver. Available in both Touring and Install versions - touring version comes with handles to make it easily transportable. Specifications Coverage Pattern .........................................................60° horizontal x 60° vertical Operating Frequency Range............................................. 48 Hz - 18 kHz +/- 3 dB .............................................................................................. 41 Hz – 24 kHz -10 dB Sensitivity @ 1M ............................................................................................100 dBSPL ............................................................ (Measured as 2.83V input, 1M whole space) Maximum Output .................................. ..127 dBSPL Cont., 133 dBSPL Program Input Power Ratings ................................. 1000W continuous, 2000W program Nominal Impedance .......................................................................................... 4 ohms Minimum Impedance ............................................................... 3.8 ohms @ 1220 Hz SH-60 The Sound of the legendary SH-50 with wider coverage Recommended Processing................................ 40 Hz HP @ 24 dB/Butterworth Drivers ......................................................................... LF 2 x 12”, MF 6 x 4” HF 1 x 1” Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories Powered version available Mounting brackets for array MB 50 Fly-ware 60-OFW Outer Fly-ware Speaker Cover Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SH 60 133 dB 100 dB 48 Hz – 18 kHz 60° x 60° 2,000 W 28 x 28 x 22 127 lbs © 2012 Danley Sound Labs. All Rights Reserved. 27 www.danleysoundlabs.com SYNERGY HORN FULL RANGE LOUDSPEAKERS The SH-50 works anywhere great fidelity; low frequency pattern control and unrivaled Magnitude/phase response are required. It has the added benefit of truly modular array-ability. For high SPL and low distortion sound reproduction. SH-50 Available in both Touring and Install versions - touring version comes with handles to make it easily transportable. The Flagship of the Synergy Horn Line Specifications Coverage Pattern .........................................................50° horizontal x 50° vertical Operating Frequency Range............................................. 50 Hz - 18 kHz +/- 3 dB .............................................................................................. 37 Hz – 24 kHz -10 dB Sensitivity @ 1M ............................................................................................100 dBSPL ............................................................ (Measured as 2.83V input, 1M whole space) Maximum Output ................................... ..127 dBSPL Cont.,133 dBSPL Program Input Power Ratings ................................. 1000W continuous, 2000W program Nominal Impedance .......................................................................................... 4 ohms Minimum Impedance .................................................................... 3.5 ohms @ 1 kHz Recommended Processing................................ 40 Hz HP @ 24 dB/Butterworth Drivers ......................................................................... LF 2 x 12”, MF 4 x 5” HF 1 x 1” Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated SH-50productionpdf 8/29/2005 11:52:02 AM Danley Shop dB (Pascals) SH-50 productionpdf Phase 115 45 0 -45 110 -135 -225 105 -315 100 -405 95 -495 90 -585 85 Phase (Degrees) SH-50 productionpdf 8192 Samples in 85.3 s, Frequency Res. = 15.3 Hz, Time Res = 65.38 ms (73.88 feet) 120 -675 Frequency (Hz) Octave Smoothing = 18.0% 20000 10000 7000 5000 4000 3000 2000 1000 700 500 400 300 200 100 -945 70 -855 70 50 -765 75 40 80 SH-50.imp Mag SH-50 impedance Gainesville GA 2/27/2008 3:39:52 PM 4096 Samples, Frequency Res. = 28.9 Hz 14 Accessories 12 Powered version available Mounting brackets for array MB 50 Fly-ware 50-OFW Outer Fly-ware Speaker Cover Weatherized options available Ohms 10 8 6 4 20000 Frequency (Hz) 10000 7000 5000 4000 3000 2000 1000 700 500 400 300 200 100 70 50 40 2 PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SH 50 133 dB 100 dB 50 Hz – 18 kHz 50° x 50° 2,000 W 28 x 28 x 25.5 133 lbs © 2012 Danley Sound Labs. All Rights Reserved. 28 www.danleysoundlabs.com SYNERGY HORN FULL RANGE LOUDSPEAKERS The SH-DFA is an asymmetrical full range horn designed to seamlessly integrate with the SH-50. The SH-DFA fits the exact footprint of the SH-50 and is only 13” high. The coverage pattern of (50° x 100°) x 50°; while still maintaining considerable pattern control due to its depth makes this a very unique problem solving product. SH-DFA Asymmetrical Full Range Horn Give the front row the quality they deserve. Specifications Coverage Pattern ................................................ 50° x 100° H asymmetric x 50° V Operating Frequency Range.......................................... 350 Hz - 18 kHz +/- 3 dB .............................................................................................. 50 Hz – 20 kHz -10 dB Sensitivity @ 1M .............................................................................................. 96 dBSPL ............................................................ (Measured as 2.83V input, 1M whole space) Maximum Output ................................... ..122 dBSPL Cont.,128 dBSPL Program Input Power Ratings ...................................... 400W continuous, 800W program Nominal Impedance .......................................................................................... 8 ohms Recommended Processing................................ 70 Hz HP @ 24 dB/Butterworth Drivers ............................................................................................ LF 1 x 10”, HF 1 x 1” Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated SH-DFA 3/06/2008 1:50:14 PM Cursor = 96.0 dB at 143926.6 Hz (-326.4 degs) SH-LPM.tds SH-LPM.tds Phase 110 180 135 90 45 0 -45 -90 -135 -180 -225 -270 -315 105 dB (Pascals) 100 95 90 85 80 75 70 20000 10000 7000 5000 4000 3000 2000 1000 700 500 400 300 200 100 70 50 65 60 Phase (Degrees) 4096 Samples in 19.8 s, Frequency Res. = 31.7 Hz, Time Res = 31.50 ms (35.60 feet) Frequency (Hz) Octave Smoothing = 16.0% SH-DFA impedance 3/6/2008 2:00:52 PM Cursor = 3.2 Ohms @ 1122.6 Hz (degs) SH-DFA.imp 1024 Samples, Frequency Res. = 72.1 Hz 22 Ohms 20 18 16 14 12 Accessories 10 8 6 4 2 20000 Frequency (Hz) 10000 7000 5000 4000 3000 2000 1000 700 500 400 300 200 100 70 50 Mounting brackets to SH50 Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SH DFA 128 dB 96 dB 350Hz – 18kHz (50°x100°) x 50° 800 W 12 x 28 x 25.5 69 lbs © 2012 Danley Sound Labs. All Rights Reserved. 29 www.danleysoundlabs.com SYNERGY HORN FULL RANGE LOUDSPEAKERS The SH-46 works anywhere great fidelity, pattern control and unrivaled Magnitude/phase response are required. It has the added benefit of truly modular array-ability. For high SPL and low distortion sound reproduction. SH-46 Available in both Touring and Install versions - touring version comes with handles to make it easily transportable. A truly “loud” speaker in a compact package Specifications Coverage Pattern ......................................................... 40° horizontal x 60° vertical Operating Frequency Range.........................................71 Hz – 14.5 kHz +/- 3 dB .............................................................................................. 58 Hz – 16 kHz -10 dB Sensitivity @ 1M ............................................................................................106 dBSPL ............................................................ (Measured as 2.83V input, 1M whole space) Maximum Output .................................. ..135 dBSPL Cont., 141 dBSPL Program Input Power Ratings ................................. 1400W continuous, 2800W program Nominal Impedance .......................................................................................... 4 ohms Minimum Impedance ................................................................. 3.4 ohms @ 810 Hz Recommended Processing................................ 60 Hz HP @ 24 dB/Butterworth Drivers ..................................................................... LF 2 x 12”, MF 4 x 4”, HF 1 x 1.4” Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated SH-46.tds SH-46.tds Phase 2048 Samples in 85.3 s, Frequency Res. = 15.3 Hz, Time Res = 65.37 ms (73.87 feet) 120 135 90 45 0 -45 -90 -135 -180 -225 -270 -315 -360 -405 115 dB (Pascals) 110 105 100 95 90 85 80 75 Phase (Degrees) SH-46production 6/05/2008 4:52:47 PM Cursor = 106.0 dB at 4888.4 Hz (-277 degs) 20000 Frequency (Hz) Octave Smoothing = 18.0% 10000 7000 5000 4000 3000 2000 1000 700 500 400 300 200 70 100 50 40 30 70 SH-46 .imp Mag SH-46 Impedence 5/21/2008 2:03:48 PM Accessories 2048 Samples, Frequency Res. = 17.2 Hz 20 Powered version available Mounting brackets for array MB 50 Fly-ware 46-OFW Outer Fly-ware Speaker Cover Weatherized options available Ohms 15 10 20000 Frequency (Hz) 10000 7000 5000 4000 3000 2000 1000 700 500 400 300 200 100 70 50 40 30 20 5 PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SH 46 141 dB 106 dB 58 Hz – 16 kHz 40° x 60° 2,800 W 29 x 22.3 x 22.7 118 lbs © 2012 Danley Sound Labs. All Rights Reserved. 30 www.danleysoundlabs.com SYNERGY HORN FULL RANGE LOUDSPEAKERS The SH-25 is ideal where great fidelity; high output and pattern control are required in both horizontal and vertical arrays. With a coverage pattern of 25° x 25°, this Hi-Q box was designed for long-throw applications. A single SH-25 has a frequency response of 90 Hz – 18 kHz, and four in an array will extend the low frequency down to 50 Hz. Driver compliment is 8 - 6.5" woofers, 4 - 4" midrange, and 1 - 1" high frequency. SH-25 Long-throw full range loudspeaker with Hi-Fi Sound Specifications Coverage Pattern ......................................................... 25° horizontal x 25° vertical Operating Frequency Range............................................ 90 Hz – 18 kHz +/- 3 dB .............................................................................................. 70 Hz – 20 kHz -10 dB Sensitivity @ 1M ............................................................................................110 dBSPL ............................................................ (Measured as 2.83V input, 1M whole space) Maximum Output .................................. ..137 dBSPL Cont., 143 dBSPL Program Input Power Ratings ................................. 1000W continuous, 2000W Program Nominal Impedance .......................................................................................... 4 ohms Recommended Processing................................ 70 Hz HP @ 24 dB/Butterworth Drivers ....................................................................... LF 8 x 6.5”, MF 4 x 4”, HF 1 x 1” Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated SH-25 11/28/2007 12:21:21 PM Outside SH-25.tds 4096 Samples in 15.0 s, Frequency Res. = 31.6 Hz, Time Res = 31.69 ms (35.81 feet) 120 115 110 dB (Pascals) 105 100 95 90 85 80 75 15000 10000 7000 5000 4000 3000 2000 1000 700 500 400 300 200 100 70 70 Frequency (Hz) Octave Smoothing = 18.0% SH-25 impedance Gainesville GA 2/27/2008 3:44:23 PM Outside SH-25.imp Mag 4096 Samples, Frequency Res. = 15.8 Hz 12 Ohms 10 Accessories 8 Powered version available Mounting brackets for array MB 60 Fly-ware Weatherized options available 6 4 20000 Frequency (Hz) 10000 7000 5000 4000 3000 2000 1000 700 500 400 300 200 100 70 50 2 PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SH 25 143 dB 110 dB 90Hz – 18kHz 25° x 25° 2,000 W 28 x 28 x 50.7 176 lbs © 2012 Danley Sound Labs. All Rights Reserved. 31 www.danleysoundlabs.com SYNERGY HORN FULL RANGE LOUDSPEAKERS The SM-60F combines great fidelity, low frequency pattern control and unrivaled Magnitude/phase response into an ultra-compact enclosure. It has the added benefit of truly modular array-ability. Available in both Touring and Install versions - touring version comes with handles to make it easily transportable. Specifications Coverage Pattern .........................................................60° horizontal x 60° vertical Operating Frequency Range............................................. 66 Hz - 24 kHz +/- 4 dB .............................................................................................. 52 Hz – 26 kHz -10 dB Sensitivity @ 1M .............................................................................................. 99 dBSPL ............................................................ (Measured as 2.83V input, 1M whole space) Maximum Output ................................... ..125 dBSPL Cont.,131 dBSPL Program Input Power Ratings ................................... 800W continuous, 1600W program Nominal Impedance .......................................................................................... 4 ohms Minimum Impedance ................................................................. 3.4 ohms @ 150 Hz Recommended Processing................................ 50 Hz HP @ 24 dB/Butterworth SM-60F Synergy Horn Performance in an Ultra-Compact Box Drivers ............................................................................LF 2 x 8”, MHF 1 x 5” Coaxial Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories Powered version available Mounting brackets for array MB 50 Fly-ware Speaker Cover Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SM 60F 131 dB 99 dB 66 Hz – 24 kHz 60° x 60° 1,600 W 20.6 x 20.6 x 16.3 50 lbs © 2012 Danley Sound Labs. All Rights Reserved. 32 www.danleysoundlabs.com SYNERGY HORN FULL RANGE LOUDSPEAKERS Similar to its brother (SM-60F), the SM-60M combines great fidelity, low frequency pattern control and unrivaled Magnitude/phase response into an ultra-compact enclosure. Perfect for mains with bass arrays, fills and distributed audio applications. Same box as the SM-60F with the following differences: Only available in install version, less power requirements and no low frequency drivers. Specifications Coverage Pattern .........................................................60° horizontal x 60° vertical Operating Frequency Range.......................................... 270 Hz - 15 kHz +/- 3 dB ............................................................................................178 Hz – 24 kHz -10 dB Sensitivity @ 1M ............................................................................................100 dBSPL ............................................................ (Measured as 2.83V input, 1M whole space) Maximum Output ................................... ..124 dBSPL Cont.,130 dBSPL Program Input Power Ratings ...................................... 250W continuous, 500W program Nominal Impedance .......................................................................................... 8 ohms Minimum Impedance ..................................................................... 5 ohms @ 11 kHz SM-60M Synergy Horn Performance in an Ultra-Compact Box Recommended Processing.............................. 200 Hz HP @ 24 dB/Butterworth Drivers ........................................................................................................ 1 x 5” Coaxial Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories Mounting brackets for array MB 50 Fly-ware Speaker Cover Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SM 60M 130 dB 100 dB 270 Hz – 15 kHz 60° x 60° 500 W 20.6 x 20.6 x 16.3 45 lbs © 2012 Danley Sound Labs. All Rights Reserved. 33 www.danleysoundlabs.com SYNERGY HORN FULL RANGE LOUDSPEAKERS The SM-96 combines great fidelity, low frequency pattern control and unrivaled Magnitude/phase response into an ultra-compact enclosure. It has the added benefit of truly modular array-ability. Available in both Touring and Install versions - touring version comes with handles to make it easily transportable and pole cup allows for portability and fits most tripods. Specifications Coverage Pattern .........................................................90° horizontal x 60° vertical Operating Frequency Range............................................. 55 Hz - 24 kHz +/- 3 dB .............................................................................................. 42 Hz – 26 kHz -10 dB Sensitivity @ 1M .............................................................................................. 98 dBSPL ............................................................ (Measured as 2.83V input, 1M whole space) Maximum Output ................................... ..124 dBSPL Cont.,130 dBSPL Program Input Power Ratings ................................... 800W continuous, 1600W program Nominal Impedance .......................................................................................... 4 ohms Minimum Impedance ................................................................. 3.4 ohms @ 137 Hz SM-96 Synergy Horn Performance in an Ultra-Compact Box Recommended Processing................................ 55 Hz HP @ 24 dB/Butterworth Drivers ............................................................................LF 2 x 8”, MHF 1 x 5” Coaxial Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated Accessories Powered version available Mounting brackets for array MB 50 Fly-ware Speaker Cover Weatherized options available PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SM 96 130 dB 98 dB 55 Hz – 24 kHz 90° x 60° 1,600 W 31.5 x 21 x 15.5 73 lbs © 2012 Danley Sound Labs. All Rights Reserved. 34 www.danleysoundlabs.com SYNERGY HORN MONITOR LOUDSPEAKERS The SH-LPM is a wide dispersion fully horn-loaded monitor loudspeaker. Due to the large horn mouth the SH-LPM offers substantial directivity with front to back rejection and high gain before feedback. High frequencies are very smooth throughout the coverage pattern and are not beamy. Applications include anywhere wide coverage with high directivity is desired. With its combination of performance, clarity, low profile aesthetics and waterproof grill the SH-LPM sets a new benchmark in floor monitor loudspeakers. Specifications SH-LPM Stylish Low-Profile Monitor with inputs on both sides Coverage Pattern ...................................................................................... 110° conical Operating Frequency Range............................................. 60 Hz - 20 kHz +/- 3 dB .............................................................................................. 52 Hz – 24 kHz -10 dB Sensitivity @ 1M .............................................................................................. 95 dBSPL ................................................................ (Measured as 2.83V input, 1M half space) Maximum Output .................................. ..120 dBSPL Cont., 126 dBSPL Program Input Power Ratings ...................................... 300W continuous, 600W program Nominal Impedance .......................................................................................... 8 ohms Minimum Impedance ....................................................................... 6 ohms @ 8 kHz Recommended Processing................................ 60 Hz HP @ 24 dB/Butterworth Drivers .................................................................................................. Single 8” coaxial Input Connections................................................................... 4-NL4MP (2 per side) Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated SH-LPM.tds SH-LPM.tds Phase 4096 Samples in 90.3 s, Frequency Res. = 14.9 Hz, Time Res = 67.27 ms (76.01 feet) 110 45 0 100 -45 dB (Pascals) 105 -90 95 -135 90 -180 85 -225 80 -270 20000 Frequency (Hz) Octave Smoothing = 18.0% SH-LPM impedance Gainesville GA 12/14/2007 3:13:39 PM 10000 7000 5000 4000 3000 2000 1000 700 500 400 300 -450 200 -405 60 100 -360 65 70 -315 70 50 75 Phase (Degrees) SH-LPM 12/19/2007 11:10:05 AM dB Shop Low profile monitor in test chamber mic at 1M Cursor = 67.1 dB at 40.0 Hz (-25.1 degs) SH-LPM.imp Mag 4096 Samples, Frequency Res. = 22.3 Hz 40 35 Ohms 30 25 20 Accessories 15 10 Weatherized options available 20000 Frequency (Hz) 10000 7000 5000 4000 3000 2000 1000 700 500 400 300 200 100 70 50 40 5 PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SH LPM 126 dB 95 dB 60 Hz – 20 kHz 110° conical 600 W 13.6 x 21.5 x 18 41 lbs © 2012 Danley Sound Labs. All Rights Reserved. 35 www.danleysoundlabs.com SYNERGY HORN MONITOR LOUDSPEAKERS The SH-100M is a wedge style monitor that offers wide dispersion with front to back rejection and high gain before feedback. Accuracy, Fidelity and Economy; great things come in three’s! SH-100M Specifications Low-Profile Wedge Style Monitor Coverage Pattern ...................................................................................... 110° conical Operating Frequency Range............................................. 70 Hz - 20 kHz +/- 3 dB .............................................................................................. 50 Hz – 24 kHz -10 dB Sensitivity @ 1M .............................................................................................. 95 dBSPL ................................................................ (Measured as 2.83V input, 1M half space) Maximum Output .................................. ..120 dBSPL Cont., 126 dBSPL Program Input Power Ratings ...................................... 300W continuous, 600W program Nominal Impedance .......................................................................................... 8 ohms Minimum Impedance ....................................................................... 5 ohms @ 7 kHz Recommended Processing................................ 70 Hz HP @ 24 dB/Butterworth Drivers .................................................................................................. Single 8” coaxial Input Connections.......................................................................................... 2-NL4MP Enclosure Material ......................... 13ply, 18mm Baltic Birch, polyurea coated SH-100M 2/25/2008 9:01:11 AM Cursor = 96.4 dB @ 1574.9 Hz (-276.0 degs) SH-100M.tds SH-100M.tds Phase 4096 Samples in 7.5 s, Frequency res = 66.4 Hz, Time Res = 15.06 ms (17.01 feet) 105 45 0 100 dB (Pascals) 95 -90 90 -135 85 -180 -225 Phase (Degrees) -45 80 -270 75 -315 20000 10000 7000 5000 4000 3000 2000 1000 700 500 400 300 200 100 70 50 70 Frequency (Hz) Octave Smoothing = 18.0% SH-100M impedance 2/25/2008 9:25:05 AM 4’ from wedge SH-100.imp Mag 4096 Samples, Frequency Res. = 28.3 Hz 25 Ohms 20 15 Accessories 10 Weatherized options available 20000 Frequency (Hz) 10000 7000 5000 4000 3000 2000 1000 700 500 400 300 200 100 70 50 40 5 PERFORMANCE DATA Model Max SPL Sensitivity Magnitude Response Beam Width Power Rating Dimensions (in.) Weight SH100M 126 dB 95 dB 70 Hz – 20 kHz 110° conical 600 W 20.5 x 20.5 x 12 41 lbs © 2012 Danley Sound Labs. All Rights Reserved. 36 www.danleysoundlabs.com DANLEY DSP / AMPLIFIERS / ACCESSORIES DSL DSP Series (available in black faceplate only) The Danley DSLP48 series digital loudspeaker management system is loaded with functions. With its powerful performance and price point it is the first choice among sound engineers and contractors. • • • • • • • • General Power: 90-265 VAC (50/60Hz) Dimensions: 19”x1.75”x9” (483x44x229mm) Weight: 10 lbs / 4.6 kg Inputs/Outputs Input Impedance: >10k Ohms Output Impedance: 50 Ohms Maximum Level: +20dBu Type: Electronically balanced Audio Performance Freq Response: +/- 0.1dB (20 to 30kHz) Dynamic Range: 115dB typ. (un-weighted) CMMR: > 100dB (50 to 10kHz) Crosstalk: < -100dB Distortion: 0.002% (1kHz @+4dBu) 4 x 8 in out configuration Precise DSP Algorithms High performance audio convertors 8 Bands PEQ per channel Phase Correction Built in Ethernet connectivity Crossovers, Compressors, Limiter, Delay 31 Band 1/3 Octave GEQ per input Connectors Analog: 3-pin XLR RS-232: Female DB-9 USB: Type B Ethernet: Standard CAT-5 Power: Standard IEC Socket DSLA Series Rack Mount Amps (available in black faceplate only) Designed with touring sound professionals in mind, the DSLA Series power amplifiers faithfully produce high power with low distortion in an extremely lightweight economical package. Rock stable in stereo or bridged mode operation this series is engineered to exceed expectations, when powering multiple or single loudspeaker enclosures down to a 2 ohm load. Dramatically reduced net weight (21.8 lbs, 10 kg) Latest generation of high speed, wide-bandwidth output devices Twin-tunnel cooling with back-to-front air flow Dual, rear-mounted, continuous variable-speed fans Balanced ¼” and female XLR inputs with sensitivity selection Speakon® and five-way binding post output connectors Front panel circuit breaker switch 19” W x 3.5” H x 12.25” D (483 mm x 89 mm x 312 mm) Five-year warranty Normal 2 channel Bridged Mono Power Model No. @ 8 Ohms @ 4 Ohms @ 2 Ohms @ 8 Ohms @ 4 Ohms DSLA 1.7k 290 W 525 W 850 W 1,050 W 1,700 W DSLA 3.3k 590 W 1,000 W 1,650 W 2,000 W 3,300 W DSLA 4.5k 825 W 1,450 W 2,250 W 2,900 W 4,500 W DSLA 6.5k 1,300 W 2,200 W 3,250 W 4,400 W 6,500 W © 2012 Danley Sound Labs. All Rights Reserved. www.danleysoundlabs.com 37 DANLEY DSP / AMPLIFIERS / ACCESSORIES Touring covers: Product SH100 SH69 SH60 SH50 SH46 SM60F TH412 TH215 TH212 TH115 THMINI CS30 Part # C‐100 C‐69 C‐60 C‐50 C‐46 C‐60F C‐412 C‐215 C‐212 C‐115 C‐MINI C‐30 Array Brackets: (for all “array‐able” products) Product SH69 SH60 SH50 SH46 SM60F SM60M Part # MBA‐69 MBA‐60 MBA‐50 MBA‐46 MBA‐60F MBA‐60M Outer Fly‐Ware (OFW) © 2012 Danley Sound Labs. All Rights Reserved. Product SH69 SH60 SH50 SH46 JH90 Part # 69‐OFW 60‐OFW 50‐OFW 46‐OFW JH90‐OFW www.danleysoundlabs.com 38 DANLEY DSP / AMPLIFIERS / ACCESSORIES MB 50 Fly‐ware Compatible with: SH50, SH46, SH60, SH69, SM60F, SM60M & GH60 Mounting Brackets & Adapters Product SH‐100 SH‐100B SH‐95 SH‐MINI SH‐MICRO Bracket # BRKT‐100 BRKT‐100B BRKT‐95 BRKT‐MINI BRKT‐MICRO Adapter # ADPT‐100 ADPT‐100B ADPT‐95 ADPT‐MINI ADPT‐MICRO Mounting adapters enable U‐Brackets to be connected via schedule 40 pipe to Chief Mfg. ceiling mounts. *Chief products must be purchased from a Chief dealer. www.cheifmfg.com Chief CMA395* Angled Ceiling Plate Chief CMA360* I‐Beam Clamp (Use with ADPT adapters) Weatherization Including Fiberglas Available for All DSL Loudspeakers & Subwoofers © 2012 Danley Sound Labs. All Rights Reserved. www.danleysoundlabs.com 39 WHERE TO BUY ‐ DANLEY SOUND LABS PRODUCTS / WARRANTY STATEMENT Danley products are represented and sold through a network of key representatives and approved dealers in the US and abroad. For international inquiries other than Canada, please contact our corporate office at: [email protected] Danley Sound Labs – Corporate Office 2196 Hilton Drive, Suite G, Gainesville, GA. 30501 Phone (770)535‐0204 or (877)419‐5805 Fax (678)928‐4010 Email: [email protected] US & Canada Representatives: Light Green (Northwest, Alaska & Hawaii): Ellison Northwest www.enw.cc P: (253)564‐7209 F: (253)276‐0007 Burgundy (N. CA / N. NV): Warren Associates www.warrenrep.com P: (800)449‐8640 F: (925)449‐8648 Tan (S. CA / S. NV): Ask Sales & Representation Inc [email protected] P: 818‐913‐2771 Teal (Rockies, Arizona, New Mexico): Darby & Associates www.darbyreps.com P: (303) 232‐2954 F: (303) 416‐8721 Yellow (Midwest North): Ludwig Marketing – [email protected] P: 847‐778‐0186 Orange (Midwest Central): Ludwig Marketing – [email protected] P: 847‐778‐0186 Brown (Midwest South): JMS Marketing, Inc www.jmsmarketing.com P: (512)266‐1113 F: (512)266‐9002 Red (Michigan): CM Sales, Inc [email protected] P: (313)520‐9300 Purple (Ohio Valley): AVCOM Inc www.avcomcle.com P: (440)777‐2442 F: (440) 777‐9282 Dark Green (Southeast): Henry W. Phillips Co. www.hwpco.com P: (800)877‐3070 F: (678)866‐0512 Lavendar (Florida): Bencsik Associates www.bencsik.com P: (800)342‐0197 F: (352)867‐8691 Blue (New England / NY): Intelligent Marketing www.inmarketing.com P: (866)464‐2288 F: (978)702‐0111 Pink (North Mid Atlantic / NYC): Lienau AV Associates www.lienauav.com P: (410)995‐6011 F: (410)995‐6013 Canada: Mitek Canada www.mitekcanada.com P: (604)607‐4595 Warranty on Danley Commercial Audio Products Danley Sound Labs Inc. (Danley) products are designed and manufactured in the USA with great detail for defect free performance. Danley offers the following Warranty which covers product directly purchased from dealers in the 50 US States and Canada and only applies when product has been installed and operated under normally accepted standards. Warranty Covers Product Against Defects in Material or Workmanship for 5 Years. The warranty period starts on the date of purchase from an authorized Danley dealer. Coverage: Danley will repair or replace the product and or defective portion of said product by this warranty if it becomes defective, malfunctions or otherwise fails to conform under normal use and service during the term of this warranty without charge for labor or materials. Repairs may be performed using new or refurbished parts that meet or exceed Danley specifications for new parts. If Danley elects to replace the product, the replacement may be a reconditioned unit. Buyer will be responsible for any removal or reinstallation charges and for any shipping charges if the product must be shipped for warranty service. However, Danley will pay the return shipping charges provided the destination is with the warranted area. This warranty does not cover damage, deterioration (due to corrosive environment) or malfunction resulting from accident, negligence, misuse, abuse, improper installation or operation, repair or attempted repair by someone other than a authorized Danley service tech, any product with altered serial number, damage due to power line surge or related electrical abnormalities, improper grounding, lightning damage or acts of God, damage during shipment (claims must be presented to the carrier). This warranty only covers original end‐user purchaser. To Obtain Warranty Service: please contact your authorized dealer or sound contractor for instructions for warranty claims or contact Danley directly at [email protected]. Product requiring shipping should be packed securely and include explanation of problem along with a copy of original bill of sale. No products shipped will be accepted unless prepaid or prior agreement with Danley has been arranged. All returns must be accompanied by a Return Authorization Number. If any returned product is found ineligible, the cost of repairs will be forwarded to owner and product repaired and returned to buyer upon payment received by Danley. © 2012 Danley Sound Labs. All Rights Reserved. www.danleysoundlabs.com 40
Similar documents
A Brown Soun Inc. Active Musical Products Ltd. Adamson Systems
C-Ducer (acoustic instrument contact mic systems) Cortex, Gemini (DJ equipment) dB Technologies (active & passive loudspeakers, contractor install products, wireless mics, in-ear monitoring systems...
More information