WAN made easy - Conversion, Extension and Simulation from the

Transcription

›› WIDE AREA NETWORKING
WAN made easy - Conversion, Extension and
Simulation from the industry experts.
›› Connect your remote sites using high-speed circuits.
›› Extend your network across campus over copper or fibre.
›› Convert your interfaces for cost-effective communications.
Conversion Extension & Multiplexing Si m u l at i on Network Timing
Low-cost and simple
Make better use o f exist i ng circuits
Save time and money
When accuracy is everything
WAN
Find everything you need for Wide Area
Networking conversion and extension
demands.
With more than 12,000 products, there’s no need to go anywhere else.
Whether you’re a small office that wants a small cabinet to house your server or a large enterprise that needs multiple data centres throughout the world, Black Box has the technology,
product selection and know-how to make it happen. We’re your one-company, completesolution provider. At Black Box, you’ll find everything you need to deliver end-to-end solutions.
Our selection includes:
Infrastructure
- Copper
CAT7, CAT6, CAT5e
- Fibre Optic
Distribution Style
Indoor/Outdoor
Interlocking Fibre
- USB
- SCSI
- Audio/Video/Keyboard/Mouse
- Serial & Parallel.
- Patch Panels
- Jacks, Wallplates, Modules
Cabinets & Racks
- Freestanding Cabinets
- Wallmount Cabinets
- Racks & Enclosures
- Cable Management
- Accessories
KVM ServSwitchTM
- Local and Remote Switches
- IP KVM Solutions
- Copper & Fibre Extenders
- KVM Console Trays
- Cables & Accessories
Digital Signage
- Video Extenders
- Video Splitters
- Video Switches
- Media Players
- Plasma & LCD Displays
- Digital Signage Software
Power & Environment
- Power Strips
- UPSs
- Power Management
- Surge Supression
- Environmental Monitoring
Networking
- Media Converters
- Switches
- Routers
- Network Security
- Ethernet Extenders
- Serial and Console Servers
- Print Servers
Testers and Tools
- Copper & Fibre Tools
- Copper & Fibre Testers
- General Tool Kits
Server & Desktop
- Hubs
- Converters
- Extenders
- Switches
- Cables
Te c h S u p p o r t 0 1 1 8 9 6 5 6 0 0 0 • S a l e s 0 1 1 8 9 6 5 6 1 5 0
WAN
›› Tech Support: 0118 965 6000
We make it easy to do business.
Pricematch programme
Submit your quote to us and we’ll
do our best to beat it with one of
our own Black Box branded
solutions. Try it today!
FREE 24/7 Technical Support
Speak with our of our technical
experts on the phone, or let us
call you back by visiting
www.blackbox.co.uk and
requesting a call back.
Proven Quality
Black Box is ISO9001:2008
certified and follows the same
proven quality procedures that
we have been practising for 17
years of ISO accreditation.
Educational Resources
As well as our FREE 24/7 Tech
Support, we also have great
technical resources online,
including technology overviews,
Black Box explains, product
datasheets and more.
Custom Solutions
If you can’t find what you are
looking for in our 12,000 off-theshelf products, don’t despair
because chances are, we can
build it!
www.blackbox.co.uk
Our website offers thousands of
products, technical guides,
company information and much
more!
›› G.703 Interface Converters.................................2
›› E1/E2 Converters..................................................3
›› HSSI Converters................................................4-5
›› MultiRack..........................................................6-7
›› Baluns................................................................8-9
›› Serial Interface Converters.........................10-11
›› Fibre Converters................................................12
›› G.703/G.704 Converter......................................13
›› Q.931/DPNSS/SIP Converters............................14
›› E3 and LAN Extension.......................................15
›› STM-1 and Serial Fibre Extension....................16
›› High-Speed Fibre Multiplexer..........................17
›› Drop/Insert Multiplexers..................................18
›› G.703 Ether Mux................................................19
›› LAN over DSL.....................................................20
›› Multi-Interface DSL Extender..........................21
›› VDSL Quadband Extender..........................22-23
›› Remote Mini-Bridge....................................22-23
›› Serial Fibre Extenders......................................24
›› Satellite Simulator 3........................................25
›› GPS Time Servers....... .................................26-27
›› DSL...................................................................28-29
Introducing
The Black Box Abeo G.703 Ether Mux, which gives
you the capability to connect up to 8 LAN and 8 E1
circuits over fibre.
See page 19 for more details
Special
Offer Prices
Valid until 30/06/09
Special Offers
Offers you cannot afford to miss.
Look for the pink bugs and
prices throughout this brochure!
i n f o @ b l a c k b o x . c o . u k • w w w. b l a c k b o x . c o . u k
1
CONVERSION
Abeo G.703 Converters
Full performance E1 2.048Mbps speeds for cost effective routing.
• Cost Effective E1, G.703, 2.048 Mbps
interface.
• X.21 or V.35 versions.
• AC or DC powered versions.
• External alarm relay port.
• Easy to install & maintain.
• Must be used in pairs.
• Compact unit.
The new Abeo G.703 to X.21 or V.35
converter from Black Box provides connectivity
from G.703 to an X.21 or V.35 device. This is
typically used for converting a 2 Mbps G.703
line such as a telecoms service, into an X.21 or
V.35 interface on a router or other wide area
device. The unit supports both BNC 75-ohm
and RJ-45 120-ohm connections.
TECH SPECS
Approvals — EN41003, EN60950, EN55022, EN50082
Barriers — Full as per EN41003
Clocks — Internal, E1 Loop, Terminal, DTE Mode (DIP
switch selectable)
Humidity — 95% RH noncondensing
Line Encoding — HDB3
Performance — OTR.001
Speed — 2.048 Mbps + 50 ppm
Standards — E1 G.703 (unframed), X.21, V.35
Temperature — 0 to +45OC
Interfaces — (1) G.703 on dual coax (75 ohm), (1)
G.703 on RJ-45 (120 ohm) switch-selectable, X.21 via
DB15 F or V.35 via 34-way female MRAC connector.
Connectors — (2) BNC (coax), (1) RJ-45 Female, (1)
DB15 Female or (1) Female 34-way MRAC
Indicators — (1) LED: Network OK (Green)/LOS(Red)
Power — Internal, 220-250 VAC, 50-60 Hz, IEC320.
Input connector or -32 to -72 VDC, 100-200 mA
Dimensions — 4.4H x 20.2W x 13.2D cm without feet.
(4.7H x 20.2W x 13.2D cm with feet)
Weight — 1 kg
Item
Code
Abeo G.703 Converter
G.703 to X.21 (AC Powered)
MTU9000M
G.703 to V.35 (AC Powered)
MTU9001M
G.703 to X.21 (DC Powered)
MTU9000M-DC
G.703 to V.35 (DC Powered)
MTU9001M-DC
For a closer look…see the Web,
request datasheet:
Price
£245.00
£245.00
£245.00
£245.00
71721
Abeo Framed G.703 to X.21 or V.35 Converter
The cost-effective way to utilise your circuits and services.
• Cost effective G.703 to X.21 conversion.
• X.21 DTE port.
• Fractional E1/Unstructured/Framed
support.
• Easy to install and maintain.
• Compact unit.
TECH SPECS
E1 Line Interface
Port — G.703, 75 ohm unbalanced, 120 ohm balanced
Interface — BNC (75 ohm), RJ-45 (120 ohm)
Framing — G.704 (with or without CRC4) or
unframed
Line Coding — HDB3
Bit Rate — 2.048Mbps +/- 50 ppm
Barrier — Fully barriered per EN41003
Cable Lengths — RG59 = 600m, UR202 = 750m
DTE Interface (For MTU9005M)
Port — X.21
Interface — 15-way female D type
Bit Rate — 2.048Mbps or n*64Kbps (n = 1 to 31)
Configuration
Clocks — Internal, E1 Loop, Terminal, DTE Mode, set
by dip switches
Set Up — Start Timeslot: 1 to 31, Bandwidth: 1 to 31,
CRC4: Enable/Disable, Timeslot 16 bypass:
Enable/Disable
Status Display
Type — Status LED on rear panel
2
Off — Mains power off
Red — Loss of Signal (LOS)
Green — Unit OK
Compliance & Approvals
Performance — PD7024 (NTR4)
Safety — EN41003, EN60950
EMC — EN55022, EN50082
Environment
Temperature — 0 to 50oC
Humidity — 95% RH, non-condensing
Pressure — 86 - 106KPA
Power Supply
AC Mains — 100-250VAC, 50-60Hz, 35-15mA, IEC
connector
DC Supply — -40 to -7VDC, 100-50mA
Power Consumption — 3.5 watts approx when
operating
Product
Dimensions — Rackmount: 4.4(H) x 20.2(W) x 13.2 (D)
Desktop: 4.8(H) x 20.2(W) x 13.2(D)
The new MTU9005M & MTU9012 provide a
new level of performance for connecting
bridges, routers and other equipment to a
structured leased line. The G.703 to X.21 or
V.35 converter from Black Box provides
connectivity from G.703 to an X.21 or V.35
device. This is typically used for converting a 2
Mbps G.703 line such as a telecoms service, into
an X.21 or V.35 interface on a router or other
wide area device. The unit supports both BNC
75-ohm and RJ-45 120-ohm connections.
Item
Code
Price
Abeo Framed G.703 to X.21/V.35 converter
X.21 Converter (AC) MTU9005M
£495.00
X.21 Converter (DC) MTU9005M-DC £495.00
V.35 Converter (AC) MTU9012
£495.00
V.35 Converter (DC) MTU9012-DC
£495.00
request datasheet:
71735
CONVERSION
Abeo Plus E1 (n*64k) Interface Converter
Get Fractional E1 G.703/G.704 — X.21/V.35 conversion.
• High-spec E1, G.703, 2.048Mbps interface.
• Fractional E1 by allowing n*64Kbps
channels.
• Remote configuration and testing of units
across the network.
• Comprehensive performance monitoring
of both device and line.
• X.21 or V.35 ports.
• Optional SNMP management.
• Optional -48 volt DC supply.
The Black Box Abeo Plus is used to interface
high performance DTE equipment such as
bridges or routers to 2.048Mbps E1 services.
The fractional E1 service is allocated on an
n*64Kbps basis. The DTE equipment may
present an X.21 or V.35 interface. The Abeo
Plus units are used in pairs with one unit at
either end of the Wide Area link. Error
conditions and usage statistics are gathered
and stored by the Abeo Plus. Unit set-up is
done via a comprehensive menu system which
is accessed via a local or remote terminal.
TECH SPECS
Line E1 Interface
Port — G.703, 75-ohm unbalanced, 120-ohm balanced
Interface — BNC (75-ohm), RJ-45 (120-ohm)
Framing — G.704 (with or without CRC4) or
unframed
Bit Rate — 2.048Mbps + 50ppm
DTE Interface
Port — X.21 or V.35
Interface — X.21: ISO4903, 15-Way, Female, D-Type
V.35: ISO2593, 34-Way, M-rack
Bit Rate — 2.048Mbps or N*64Kbps (n = 1 to 31)
Management
Type — Menu Driven
Access — System console, Telnet, SNMP
Clocks — Internal, E1 Loop, DTE mode (CCITT cct 113)
Status LED & Diagnostics
Major Alarms — LOS, LOF, SQ
Minor Alarms — AIS, RAI
Data — DTE Tx Data, DTE Rx Data, DTE Fault
Test — Test via menu, Test LED on front panel
Power Supply
AC Mains — 100-250VAC, 50-400Hz, 50mA IEC
connector
-48 VDC — -36 to -72 VDC, 200-100mA, Buccaneer
connector
Item
Code
Price
Abeo Plus E1 (n*64k) Interface Converter
Framed G.703/G.704 to X.21 Converter
MTU9006
£895.00
Framed G.703/G.704 to X.21 Converter (DC)
MTU9006-DC
£895.00
Framed G.703/G.704 to V.35 Converter
MTU9007
£895.00
Framed G.703/G.704 to V.35 Converter (DC)
MTU9007-DC
£895.00
Packaging
Type — 1U 19” Rackmount
Dimensions — 43.5(W) x 21.3(D) x 4.3(H) cm
Environment
Temperature — 0 - +50OC
request datasheet:
71726
Abeo E2 Interface Converter
High-speed E2 G.703 to X.21 conversion
•
•
•
•
High-spec E2 G.703 8.448-Mbps interface.
X.21 data port.
External Alarm relay port.
Remote configuration and testing of units
across the network.
• Optional -48 volt DC supply.
The Black Box Abeo E2 is a cost-effective
single-box solution to interface highperformance DTE equipment such as bridges or
routers to 8.448-Mbps E2 services. This unit will
allow you to reduce the cost of your highspeed circuit provisioning by negating the need
for a costly E2 router interface. The DTE
interface is presented as X.21, and an Abeo E2
TECH SPECS
Line E2 Interface
Bit Rate — 8.448 Mbps + 30ppm
Cable Lengths — E2 BNC RG59: 300m;
E2 BNC UR202: 370m
Framing — Unframed
Port — G.703, 75-ohm unbalanced
Interface — BNC (75 ohm)
DTE Interface
Bit Rate — 8.448 Mbps
Port — X.21
Interface — X.21: ISO4903, 15-Way, Female, D-Type
Configuration & Management
Interface — V.24, Ethernet 10BASE-T via RJ-45; Clock
modes: Internal, DTE mode (CCITT cct 113), E2 loop
Power Supply
AC Mains — 100-250 VAC, 50-400 Hz, 50-mA IEC
-48 VDC — -36 to -72 VDC, 200-100 mA
can be used at either or both ends of the
circuit. Error condition and usage statistics are
gathered and stored by the Abeo E2, and the
unit is quick and simple to configure via a local
or remote connection.
Item
Code
Price
Abeo E2 Interface Converter
E2 to X.21 Converter
MTU9008
£1,495.00
E2 to X.21 Converter (DC Powered)
MTU9008-DC £1,495.00
Product
Type — 1U 19” Rackmount
Dimensions — 4.4 (H) x 43.5 (W) x 21.3 (D) cm
Environment
Temperature — 0 to + 50OC
request datasheet:
71725
3
CONVERSION
Abeo E2 to HSSI Converter
High-speed E2 G.703 to HSSI 8.448-Mbps conversion.
•
•
•
•
High Spec E2 G.703 8.448-Mbps interface.
HSSI data port.
External alarm relay port.
Remote configuration and testing of units
across the network.
• Warranty — 1 Year
TECH SPECS
E2 Line Interface
Port — G.703, 75 ohm interface
Framing — G.742 or unframed
Bit Rate — 34.368 Mbps + 20 ppm
Cable Lengths — E2 BNC RG59 = 150m;
E2 BNC UR202 = 180m
Loopbacks — NI Local loop, NI Remote loop, DTE
loop, DTE External loop
Statistics — Per G.821, 15 min. 24 hour totals
DTE Interface
Port — HSSI per EIA612, EIA 613
Interface — 50-Way AMP (SCSI II Connector)
Bit Rate — 34.099 Mbps (Line framed); 34.368 Mbps
(Line unframed)
Power Supply
AC Mains — 100-250VAC, 50-400 Hz, 50 mA IEC
connector
DC Supply — -36 to -72 VDC, 200-100 mA
Configuration and Management
Interface — V.24, Ethernet 10BASE-T via RJ-45
Security — Access by 2-level password
Clock Modes — Internal, loop
Physical
Dimensions — 1U, 4.4(H) x 43.5(W) x 21.3(D) cm
Weight — 4 kg
Environment
Temperature — 0 to +50oC
Humidity — 95% relative humidity, noncondensing
Pressure — 86-106 KPA
The Black Box Abeo E2 to HSSI Converter is
a cost effective single box solution to interface
high-performance DTE equipment, such as
bridges or routers, to allow you to reduce the
cost of your high-speed circuit provisioning by
negating the need for a costly E2 router
interface. The DTE interface is presented as
HSSI and an Abeo E2 can be used at either or
both ends of the circuit. Error condition and
usage statistics are gathered and stored by the
Abeo E2 and the unit is quick and simple to
configure via a local or a remote connection.
Optional SNMP support allows you to manage
the unit via your existing SNMP management
system.
Item
Code
AC
MTU4850
DC
MTU4850-DC
Price
£1,995.00
£1,995.00
High-speed E3 G.703 to HSSI 34-Mbps conversion.
TECH SPECS
E3 Line Interface
Port — G.703, 75 ohm unbalanced
Framing — G.751 or unframed
Cable Lengths — E3 BNC RG59 = 150m;
E3 BNC UR202 = 180m
DTE Interface
Bit Rate — 34.099 Mbps (Line framed); 34.368 Mbps
(Line unframed)
Power Supply
connector
4
Physical
Weight — 4 kg
Environment
The Black Box Abeo E3 to HSSI converter is a
cost effective single box solution to interface
high-performance DTE equipment, such as
bridges or routers, to 34-Mbps E3 services. This
unit will allow you to reduce the cost of your
high-speed circuit provisioning by negating the
need for a costly E3 router interface. The DTE
interface is presented as HSSI and an Abeo E3
can be used at either or both ends of the
circuit. Error condition and usage statistics are
gathered and stored by the Abeo E3 and the
unit is quick and simple to configure via a local
or remote connection. Optional SNMP support
allows you to manage the unit via your existing
SNMP management system.
Item
Code
AC
MTU4900
DC
MTU4900-DC
Price
£1,995.00
£1,995.00
CONVERSION
Abeo DS3 to HSSI Converter
DS3 45-Mbps BNC to HSSI interface conversion.
The new BLACK BOX Abeo DS3 to HSSI
converter provides effortless conversion from
your DS3 45-Mbps circuit to your DS3 HSSI
equipment. The unit provides connectivity
between a DS3 WAN link and a HSSI router,
reducing the cost of expensive HSSI termination
equipment.
TECH SPECS
DS3 Line Interface
Line Coding — B3ZS
Cable Lengths — DS3 BNC RG59 = 130m;
DS3 BNC UR202 = 160m
Major Alarms — LOS
Minor Alarms — AIS
DTE Interface (HSSI Interface)
Bit Rate — 44.736 Mbps
Power Supply
connector
System — Non-volatile
Physical
Compliance & Approvals:
Performance — ANSI T1, 107, T1.107a
Safety — UL459, UL950, EN41003, EN60950
EMC — EN55022, EN50082, FCC Part 15
Statistics — G.821, AT&T54016:15-min, 24-hour totals
Management — RFC123 (MIBII), RFC1495 (Telnet),
RFC1157 (SNMP), RFC1406 (DS1/E1), Metro MIB
(DSU), RFC1215 (Traps)
Item
Code
AC
MTU4950
DC
MTU4950-DC
Environment
Price
£1,995.00
£1,995.00
1U 19” Rackmount bracket
Rackmount bracket for up to two units.
This bracket is the cost-effective way to mount up to two units side by
side. Taking up only 1U of rack space, the bracket supports up to any two
of the following models in both AC and DC variants and each unit can be
front or rear mounted.
Models Supported
•
•
•
•
•
MTU9000M.
MXU9020.
MTU9210.
MTU9009.
ICU2000.
•
•
•
•
MTU9001M.
MXU9021.
MTU9220.
MTU9010.
Item
1U, 19” Rackmount bracket
•
•
•
•
MTU9005M.
MXU9035.
MTU9230.
MTU9011.
Code
MTU9000M-RACK
•
•
•
•
MTU9012.
MTU9200.
MTU9240.
ICU232.
Price
£50.00
SNMP Management Module
Add the capability to control and monitor the DSU via your Ethernet interface.
The MTU1100 is an optional interface card that may be fitted to
various Black Box converters, fibre extenders and NTU/DSUs.
This unit can be applied to any of the following series of products
and is fully compatible with all models listed below, including both AC
and DC-powered versions.
A typical application for the MTU1100 would be the control and
management of a WAN (Wide Area Network) from a LAN (Local Area
Network) link using a SNMP (Simple Network Management Protocol)
NMS (Network Management System).
The SNMP Module supports a variety of Management information
Bases (MIBs) that must be provided to the user’s Network Management
System (NMS) to provide the NMS with a database of managed objects.
Models Supported
• MTU9006.
• MTU9008.
• MTU9007.
• MTU4850.
• MXU9070M.
• MTU4900.
• MXU9072M.
• MTU9450.
In addition to SNMP statistics, which are obtained by polling around
the network, SNMP also provides Traps that enable important unsolicited
messages relating to the system to be handled on an interrupt basis.
The SNMP Module, in combination with a Black Box DSU, gives the
network manager or administrator extensive visibility and ocntrol of the
WAN link. The ability to monitor performance statistics and network
errors from a centralised point enables quick corrective action to be
taken, thereby enhancing network efficiency and providing information
that can help to diagnose problems and manage even the most complex
networks.
Item
SNMP Management Module
Code
MTU1100
Price
£95.00
5
CONVERSION
Abeo MultiRack
Centrally manage your Abeo LAN extensions for
• Compact 12-slot rack chassis.
• Centralised SNMP management of all your
links.
• Hot-swappable power and extender cards.
• Dual redundant PSU for high availability.
• G.703, X.21 and V.35 bridge cards
available.
• Interoperable with the Abeo desktop
series.
The Rack
The MultiRack is a robust and user-friendly centralisation solution for
all your LAN bridging requirements. This compact rack provides 12 card
slots to house hot-swappable Abeo LAN extension cards, which include
G.703, X.21 and V.35 options. You can purchase a dual-powered chassis
with redundant load-sharing PSUs for increased availability, or you can
order a single-power version and upgrade to dual power later. All power
supplies are fully hot-swappable, and there is also a -48VDC option
available.
The power supplies are housed in the first two double-width chassis
slots, and you can order a PSU blanking plate if only one PSU is needed.
Blanking plates are also available to cover empty extender card slots and
should be fitted for EMC compliance.
The Abeo MultiRack is fully manageable using SNMP, Telnet or via
the local console port providing you with user-friendly local and remote
administration. SNMPv1 is supported including MIB-2 and traps. SNMP
traps are generated in response to user-configurable alarm conditions on
the extension cards, allowing you to customise the solution to your
specific needs. Performance statistics are also available for all ports, with
data collected every 15 minutes in a 24-hour period.
TM
The Cards
Our range of Abeo LAN extender cards will bridge a LAN connection
over a G.703, X.21 or V.35 wide-area link. The cards are fully hot
swappable and plug-and-play for most installations. Use these cards
mounted in the MultiRack at your central office site and our Abeo
desktop LAN extenders at remote offices or subscriber sites. The
standalone desktop units include a 4-port LAN switch, thereby removing
the need for external switches or hubs at smaller remote sites.
All the cards use HDLC encapsulation, ensuring maximum throughput
over the WAN link, and they take their clock from the attached DTE
device. The card X.21 interface is presented as a DB15 DTE connection
and the V.35 card as a 34-way M-rack DTE connector. An external cable
can be used to convert the X.21 interface to an EIA-530 interface and the
X.21 port can be used in a dual-clock EIA-530 mode.
The world’s premier technical support!
Whether you want a single product or a complete turnkey solution, we have the Tech Support
expert you need at the end of the phone line. We offer a full pre- and post-sales support, and we’re
on call to provide surefire solutions for any computer, cabling, or network communication problem.
And our Tech Support expertise extends far beyond what’s offered in our catalogue. We’re
confident that we can handle any technical question you have and custom design the solution for
you unique application.
Call Tech Support today!
6
CONVERSION
a simple, space-saving and robust multisite solution
TECH SPECS
STM-1/OC-3 Network Port (Uplink)
Fibre Options — Multimode (11 dB), Single-mode
Short Haul (15 dB)
Framing — SDH STM-1, Sonet OC-3
Presentation — Duplex SC Fibre Transceiver
(8) E1/T1 USer Ports (Downlink)
Mode — Clear Channel
Presentation — (8) RJ-45, (NT)
Timing — Internal, Loop, Through, Network
10/100BASE-T User Ports (Downlink)
Mode — 10/100BASE-T, auto-negotiate, manual
Presentation — (8) RJ-45, automatic MDI/MDI-X
crossover switching
Support — 10 Mbps, 100 Mbps, Half or Full-Duplex
Indicator — Link Activity
Access — Local Console, Telnet , SNMP
Type — Menu-driven user interface
Interface — V.24 terminal, User Port, Network Port
TM
Environment
Humidity — 0 to 95% RH, non-condensing
Power Supply
AC Mains — 100-250VAC, 50-400 Hz, 400 to 200 mA
DC Supply — 0 to + 45OC
Power Consumption — Less than 40 watts
Physical
Weight — 5 kg
Item
Code
Unmanaged Rack
with 1 AC PSU
RMU9000-1AC
with 2 AC PSUs
RMU9000-2AC
Managed Rack
with 1 AC PSU
RMU9000M-1AC
with 2 AC PSUs
RMU9000M-2AC
AC PSU for RMU9000 Rack
PSU9000AC
DC PSU for RMU9000 Rack
PSU9000DC
Management Card for RMU9000
RMU9000MAN
Module Blanking Plate
RMU9000-MBP
PSU Slot Blanking Plate
RMU9000-BP
Bridge Cards
LAN 10/100 to E1/G.703
MXU9020C
X.21
MXU9021C
E1 to Multimode Fibre 5-km Card
MTU9200C
E1 to Single-mode Fibre 20-km Card
MTU9210C
E1 to Single-mode Fibre 70-km Card
MTU9220C
E3 to Multimode Fibre 34-Mbps Card
MTU9230C
E3/DS3 to Single-mode Fibre Card
MTU9240C
Single-mode to Multimode 155-Mbps Card
MTU9009C
Multimode to STM-1/OC-3 155-Mbps Card
MTU9010C
Single-mode to STM-1/OC-3 155-Mbps Card
MTU9011C
Price
£590.00
£835.00
£935.00
£1,180.00
£255.00
£255.00
£355.00
£15.00
£15.00
£395.00
£395.00
£395.00
£495.00
£595.00
£795.00
£895.00
£495.00
£695.00
£795.00
Buyer’s Guide | Standalone Units
Product
LAN 10/100BASE-T to G.703/X.21 Card
E1 to Multimode Fibre 5km Card
E1 to Single-mode Fibre 20/70km Card
E1 to Multimode Fibre 34 Mbps Card
E3/DS3 to Single-mode Fibre Card
Single-mode to Multimode 155 Mbps Card
Multimode to STM-1/OC-3 155 Mbps Card
Single-mode to STM-1/OC-3 155 Mbps Card
Code
Standalone Code
MXU9020C/MXU9021C
MTU9200C
MTU9210C/MTU9220C
MTU9230C
MTU9240C
MTU9009C
MTU9010C
MTU9011C
MXU9020/MXU9021
MTU9200
MTU9210/MTU9220
MTU9230
MTU9240
MTU9009
MTU9010
MTU9011
7
CONVERSION
Balun Mate
Connect your 75-ohm equipment to a 120-ohm G.703 network.
Special
Offer Price
£620
Black Box Explains
G.703.
G.703 is the ITU-T recommendation
covering the 4-wire physical interface
and digital signaling specification for
transmission at 2.048 Mbps (E1). G.703
now also includes specifications for U.S.
1.544-Mbps T1 but is still generally used
to refer to the European 2.048-Mbps
transmission interface.
TECH SPECS
•
•
•
•
•
Bidirectional signal conversion.
Low profile design.
Speeds up to E1 (2.048 Mbps).
No AC power or batteries needed.
Warranty — 1 Year.
The Balun Mate from Black Box is a panel
that bidirectionally matches both the signal
impedance and the pulse shapes according to
the G.703 standard. Use it to connect your
75-ohm dual-coax hardware to a 120-ohm
twisted-pair G.703 network. You can also use
the Balun Mate to make 120-ohm terminations
on your 75-ohm network.
Coax
Twisted-Pair
The Balun Mate system includes the chassis
and 16 modules. If you don’t want 16 modules,
order the empty Balun Chassis (RM243A) and
as many of the Balun Modules (MT243C-F) as
you need. Both the MT243A and RM243A fit a
19” (48.3-cm) rack..
Speed — 2.048 Mbps
Transmission Line — G.703 (unstructured)
Connectors — 75-ohm: Dual coax BNC F;
120-ohm: Shielded RJ-45 jack (internal terminal
block included)
Power — From the interface
Dimensions — Chassis: 8.9H x 48.3W x 4.8D cm
Weight — Balun Mate: 1.1 kg, Chassis: 0.5 kg,
Module: <0.1 kg
Item
Code
Price
Choose the complete solution...
Balun Mate
MT243A
£620.00
...or choose the chassis and buy as many
modules as you need…
Balun Chassis
RM243A
£123.00
Balun Module
MT243C-F
£49.95
request datasheet:
20998
Balun Mate II
Dual-coax connectors and transformer isolation make this perfect for E1.
• Connects 120-ohm STP to 75-ohm
unbalanced coaxial equipment.
• Features 1.6/5.6 dual-coax connectors to
send TX and RX signals over STP.
• Transformer isolation up to 500 volts.
• Makes up to 16 mixed-media connections.
• Warranty — 1 Year.
Coax
Twisted-Pair
TECH SPECS
Functionality is connecting 120-ohm
twisted-pair cable to 75-ohm unbalanced coax
equipment.
But the BLACK BOX Balun Mate II’s added
flexibility is its 1.6/5.6 coax connectors, so both
the TX and RX signals can be sent over a single
length of twisted-pair. What’s more, the Balun
Mate II features transformer isolation to
protect G.703 devices from harmful ground
loops.
The Balun Mate II enables carriers and enterprise LANs to standardise on 120-ohm STP,
even though some equipment may have
unique E1 terminations. The 1.6/5.6 coax
connectors are especially useful for telcos and
networks in Australia and France to terminate
their E1 connections.
With its low-profile design, the Balun Mate
II takes only 2U of space in a 19” rack. It
enables you to match impedance and signal
characteristics of up to 16 dual-coax connections with up to 16 STP connections.
Temperature Range — 0 to 50OC
Transformer Isolation — Up to 500 volts AC/DC
Transmission Line — G.703
Connectors — 75-ohm: Dual coax BNC with 1.6/5.6 F
plugs; 120-ohm: Shielded RJ-45 jack (internal
terminal block included)
Dimensions — 8.9H x 48.3W x 4.8D cm
Weight — 1.1 kg
Item
Balun Mate II
Code
MT257A
request datasheet:
8
Price
£865.00
15987
CONVERSION
Slimline G.703 Balun Rack
Connect 75-ohm coax to 120-ohm twisted-pair.
Special
Offer Price
•
•
•
•
•
Bidirectional signal conversion.
Ultra low profile design - only 1U high.
Speeds up to E1 (2.048 Mbps).
Reversible cover with mounting ears.
Individual RJ-45 and 64-pin AMP Champ
connectors
£730
Co
ax
Twisted-Pair
ax
Co
When space is at a premium, choose the
BLACK BOX Slimline G.703 Balun Rack. It gives
you up to 16 connections in only 1U of space.
Match your 75-ohm dual coax connections to
120-ohm twisted-pair equipment without
additional AC power or batteries.
Supporting E1 data rates up to 2.048 Mbps,
the Slimline G.703 Balun Rack matches signal
impedance and pulse shapes bidirectionally according to the CCITT G.703 standard.
The 120-ohm connections are presented as
individual RJ-45 connectors and on a single 64pin AMP Champ (telco) connector. The rack has
a reversible cover and standard 19” (48.3-cm)
mounting ears and can be mounted with either
the coax or RJ-45 connectors facing out.
NOTE: The AMP 64-pin connector and RJ-45
sockets are wired in parallel. Only one
connection type may be used at a time.
G.703 75-120 Adaptors
Use twisted-pair equipment with your G.703 network.
Coax
Twisted-Pair
Use G.703 75-120 Adaptors to connect your
G.703 network to your shielded, twisted-pair
equipment.
These adaptors address the open network
provision (ONP) requirement that European
post, telephone and telegraph (PTT) authorities
offer 120-ohm twisted-pair terminations to
their customers.
Use the adaptors to convert the balanced
G.703 signals from your bridges and routers to
unbalanced G.703 signals. So you can use your
75-ohm coax hardware and communicate with
100-ohm or 120-ohm twisted-pair equipment.
The adaptors convert signals bidirectionally
too.
•
•
•
•
•
•
TECH SPECS
Transmission Line — CCITT G.703 (unstructured)
Connectors — 75-ohm: (16) dual BNC F; 120-ohm: (16)
RJ-45, (1) 64-pin AMP Champ (telco style)
Dimensions — 4.4H x 48.3W x 14D cm
Weight — 1.7 kg
Item
Code
Slimline G.703 Balun Rack
MTU464
Price
£730.00
Special
Offer Prices
Transformer isolation protects against ground loops.
Models can be ordered with 1.6/5.6 dual-coax connectors.
Solve mismatches between coax and twisted-pair equipment.
Make 75-ohm (dual-coax) and 120-ohm (twisted-pair) network connections.
Convert bidirectionally between G.703 balanced and unbalanced interfaces.
Setup is super easy. Just plug in the
adaptors. If needed, you can configure the
shield connection between the 75-ohm and
twisted-pair interfaces.
The G.703 75-120 Adaptors support E1 data
rates to 2.048 Mbps. For sending TX and RX
signals over STP cable, order the MT256A-F,
which has 1.6/5.6 dual-coax connectors.
TECH SPECS
Speed (Maximum) — 2.048 Mbps
Transformer Isolation — Up to 500 volts AC/DC
Interface — A: G.703 unbalanced; B: G.703
balanced
Connectors — Interface A: Dual-coax BNC M or F
(MT1242A) or dual-coax 1.6/5.6 F (MT256A-F);
Interface B: 8-pin shielded RJ-48C
Dimensions — 2H x 4.3W x 6.9D cm
Item
Code
Price
G.703 75-120 Adaptors
2.048-Mbps Male
MT1242A-M
£33.00
Female MT1242A-F
£33.00
2.048-Mbps with 1.6/5.6 Connectors Female
Female MT256A-F
£50.00
request datasheet:
15987
Type 43 Adaptor Cables (Simplex)
The solution to those hard-to-find cables.
These cables provide simple conversion between Type 43 connectors
and distribution frames or the standard BNC interface commonly found
on customer premise G.703 equipment. The type 43 connector sockets
feature a latching mechanism that can only be disconnected by pulling
on the outer sleeve. Contacts are gold plated. The adaptors feature 2002
Type 75-ohm coaxial cable.
Item
75-ohm Type 43 to BNC Adaptor Cables (Simplex)
1.8-m
3.0-m
Code
Price
EVUT43-0006
EVUT43-0010
£16.65
£17.76
9
CONVERSION
X.21 Interface Converters
V.35
Convert high-speed V.35 to X.21 or X.21 to V.35.
• Select connectors
in the appropriate
combination of
DTE/DCE and
genders.
• Transparent to baud rate
IC940A-M
and protocols — no
adjustments are required.
• Convert both the physical and
electrical specifications of a
V.35
X.21
V.35 device to those of an
X.21 device.
• Just plug the converter into
TECH SPECS
your V.35 and X.21 devices.
• Fast setup. No jumpers. No
Transmission Format — Synchronous,
switches. No configuration
transparent to protocol
Transmission Mode — Full- or
necessary.
half-Duplex
• Complete with connectors
Connectors —
and a 2-metre cable for easy
IC940A: (1) M/34 or M, (1) DB15 M;
installation.
IC941A-E: 230-VAC external
Power — IC940A: From the interface;
• Connect directly to your DTE
IC941A-E: 230 VAC external
and DCE equipment.
plus 2-m cable
Special
Offer Prices
Item
V.35 X.21 Interface Converters
M/34 Female (DCE)/DB15 Male (DTE)
M/34 Male (DCE)/DB15 Male (DTE)
X.21 V.35 Interface Converters
DB15 Female (DCE)/M/34 Female (DTE)
DB15 Female (DCE)/M/34 Male (DTE)
Code
Price
IC940A-F
IC940A-M
£148.00
£148.00
IC941A-EF
IC941A-EM
£259.00
£259.00
X.21 Interface Converter
High-Speed RS-232
Connect a sync RS-232
CSU/DSU to a sync X.21
router for bidirectional
communication.
232
transparent to protocol
Transmission Mode — Full- or
half-Duplex
Connectors — (1) DB15 F, (1) DB25 M
Power — From RS-232 data and control
signals
Dimensions — 2H x 5.3W x 9.1D cm plus
1.8-m cable
Item
High-Speed RS-232 X.21 Interface Converter
DB25 Male to (DTE) DB15 Female (DCE)
10
Code
IC950A
V.35
422/530
RS-422/RS-530
• Our V.35
Interface-Powered Converters
directly plug into DTE or DCE
devices with no strapping
adjustments required.
V.35
422/449
• Both models include a built-in
2-metre cable.
RS-422/RS-449
• The V.35
directly plug into DTE or DCE
devices.
• Both models include a built-in
IC960A
2-metre cable..
• All converters transmit at speeds
TECH SPECS
up to 2.048 Mbps.
Protocol — Sync
Connectors —
IC961A, IC964A: (1) M/34, (1) DB25;
IC960A, IC482A: (1) M/34, (1) DB37
Item
V.35 RS-422/RS-530 Interface-Powered Converters
V.35 Male (DCE) to
DB25 Male (DTE)
V.35 Male (DTE) to
DB25 Female (DCE)
V.35 RS-422/RS-449 Interface-Powered Converters
V.35 Male (DCE) to
DB37 Male (DTE)
V.35 Male (DCE) to
DB37 Female (DCE)
Code
Price
IC961A
IC964A
£93.00
£118.00
IC960A
IC482A
£93.00
£109.00
19228
For a closer look…see the Web, request datasheet:
RS-422/RS-530 and RS-232
RS-422/
RS-232
RS-449 Interface-Powered Converters
Perform RS-422/RS-530 conversion at up to 200 kbps!
X.21
• Supports sync data rates up to
an incredible 384 kbps!
• Perfect for WAN connectivity,
videoconferencing and any
other application that requires
high speed.
• Link to the RS-232 and X.21
interfaces with the included
1.8-m adpator cable.
TECH SPECS
• Protocol indepedent.
• No configuration and no power
Clocking — From the DCE devices
supply necessary.
Speed (Maximum) — 384 kbps
Transmission Format — Synchronous,
Special
Offer Prices
RS-422/RS-530 and V.35
RS-422/RS-449
V.35
Link M/34 and DB25 or DB37 connectors.
Price
£160.00
• All converters are DTE/DCE or
DCE/DTE switch-selectable!
• They perform physical and
electrical conversion between
RS-232 and either RS-422/RS530 or RS-422/RS-449 interfaces.
• All converters operate
synchronously or asynchronously
and are transparent to protocol.
232
422/530
232
422/449
IC238A-F
TECH SPECS
Protocol — Sync or async
Item
Code
RS-232 RS-422/RS-530 Interface-Powered Converters
DB25 Male to
DB25 Female
IC237A
DB25 Female to
DB25 Female
IC238A-F
DB25 Male
IC238A-M
RS-232 RS-422/RS-449 Interface-Powered Converters
DB25 Male to
DB37 Male
IC954A-M
Price
£145.00
£145.00
£145.00
£151.00
19228
CONVERSION
V.35 MicroConverters
RS-232
Make RS-232/V.24 to V.35 connections at 200 kbps.
Special
Offer Prices
232
V.35
232
• Bidirectionally convert and
transfer all control signals
between V.35 and RS-232/V.24
equipment.
• Operate at speeds up to 200
kbps, synchronous only.
• Protocol independent.
• DTE/DCE switchable.
• Half- of full-duplex operation.
• Include an integral 2-metre
cable with a 34-pin, v.35
connector on one end.
• Ideal for international use.
• Interface powered.
IC720A
TECH SPECS
Cable length — 2 m
Protocol — Synchronous, transparent
Connectors — (1) DB25, (1)M/34
Item
RS-232/V.24 V.35 MicroConverters
DB25 Male to
M/34 Male
M/34 Female
DB25 Female to
M/34 Female
M/34 Male
Code
IC720A-M
IC720A-F
IC721A-F
IC721A-M
V.35 Mini Converter
RS-232
Access V.35 lines with RS-232 equipment at up to 384
kbps.
• Plug it inline for high-speed,
sync communications between
RS-232 and V.35 devices.
• Supports rates to 384 kbps.
• It’s protocol-independent and
passes all appropriate data
clocking and control signals.
• DTE/DCE switchable; no other
configuration needed.
• Half- of full-duplex operation.
• It’s easy to use.
• Requires no AC power or
batteries.
Special
Offer Prices
Price
£200.00
£200.00
£200.00
£200.00
Item
RS-232 V.35 Mini Converter
DB25 Female to
DB25 Male to
10195
V.35
IC955A-F
TECH SPECS
Connectors — (1) DB25, (1)M/34
Code
M/34 Male
M/34 Male
M/34 Female
IC955A-F
IC955A-M
IC956A-M
Price
£170.00
£170.00
£170.00
Short-Haul Modem-B Async (SHM-B Async)
Economy, simplicity, functionality. The cost-effective alternative to Ethernet.
• Transmit 3.2 or 6.4 kilometres over 4-wire RS-232/V.24.
• The ME805C-R3 includes (1) 1.8-m DB35 Male/DB9 Female Cable (EVMBMC-0006) and (1) DB9
Male/DB25 Female Adaptor (FA521A).
• With the High-Speed SHM-B Async, you can trasnmit data up to 2.4 kilometeres at speeds up to
115.2 kbps. Or you can transmit data up to 6.4 kilometres at speeds up to 4800 bps.
Are your users too far away from the host
in your RS-232/V.24 async environment? Then
you need one of our Short-Haul Modems.
RS-232/V.24 is the most common serial
interface in use today. This means you can use
your Short-Haul Modem in thousands of
RS-232/V.24 installations — industrial
applications; security systems; UNIX , DEC and
HP workstation connectivity and more.
Short-Haul Modem-B Async 4-Wire (SHM-B
Async)
Choose our 4-Wire SHM-B Async to transmit
data up to 6.4 kilometres! Run loopback tests
simply by pressing a front-panel button. Open
the ME800A-E’s flip-top lid for quick DTE/DCE
selection.
Transformer and optical isolation protect
your data from electrical interference.
High-Speed Short-Haul Modem-B Async,
4-Wire
The High-Speed SHM-B Async transmits
your async data up to 2.4 kilometres at speeds
of up to 115.2 kbps! Go even further — up to
®
6.4 kilometres — at 4800 bps. Use it for applications that require higher speeds.
The ME802AE is housed in a sturdy metal
case. Run loopback tests simply by pressing a
front-panel button. And you get the same
great transformer and optical isolation as the
SHM-B Async.
®
®
TECH SPECS
Distance (Maximum) — 6.4 km
Operation — 4-wire full-duplex
Speed (Maximum) — ME800A-E, ME805C-R3:
19.2 kbps; ME802AE: 115.2 kbps
Interface — RS-232/V.24
Connectors — (1) DB25 F, (1) 4-screw terminal block
Power — ME800A-E, ME802AE: 230 VAC, 50 Hz,
external adaptor; ME805C-R3: From the rack
Dimensions —
ME800A-E, ME802AE: 3.8(H) x 10.9(W) x 11.4(D) cm;
ME805C-R3: 1.3(H) x 10.9(W) x 11.4(D) cm
NOTE: Remember to use one Short-Haul
Modem on each end.
Item
Code
Price
Short-Haul Modem-B Async, 4-Wire
Standalone
ME800A-E
£109.00
Rackmount Card
ME805C-R3
£98.00
The Rackmount Card includes (1) 1.8-m RS232/V.24 DB25 male/DB9 female cable and (1)
DB25 female/DB9 male adaptor.
High-Speed Short-Haul Modem-B Async
Metal Enclosures/No Flip-Top, 4-Wire
Standalone
ME802AE
£143.00
request datasheet:
11220
11
CONVERSION
Abeo E1 to Fibre Converter
Our compact, cost-effective E1 to fibre conversion range.
• Low cost E1 fibre extender.
• BNC and RJ-45 switch selectable E1
connections.
• Compact unit & integral power supply.
• Extend up to 70km.
Black Box Abeo E1 to Fibre Converters
provide exceptional value for money and
include all the features you would expect from
the Black Box Abeo series. These robust and
compact units are ideal for campus
environments and will extend your E1 G.703
signal over a pair of single-mode or multimode
fibres. They extend both voice (PBX) and data
(router with G.703 or via an X.21 interface
converter).
The E1 interface uses either a pair of BNC
connectors or a single RJ-45 connector; the
fibre interfaces have SC connectors. The
converters provide a Clear Channel or
unframed E1 path over the fibre. This means
that the signal can be either unstructured or
structured.
NOTE: The units must be used in pairs.
TECH SPECS
Line E1 Electrical Interface:
Port — G.703, 75-ohm unbalanced; 120-ohm balanced
Interface — BNC (75-ohm); RJ-45 (120-ohm)
Cable Lengths — RG-59: 600m; UR202: 750m
Fibre Interfaces:
Multimode — Dual SC multimode 62.5/125 µm
Single-mode — Dual SC single-mode 8/125 µm
EMC — EN55022, EN50082
Environmental:
Temperature — 0 - +45oC
Humidity — 0-95% RH, non-condensing
Physical:
AC Mains — 100-250 VAC, 50-400 Hz, 60-25mA, IEC
connector
Power Consumption — 6 watts approximately when
operating
Type — Modem, 1U high without feet
Dimensions — Rackmount: 4.4(H) x 20.2(W) x 13.2(D)
cm (without feet);
Desktop: 4.8(H) x 20.2(W) x 13.2(D) cm (with feet)
Item
Code
Price
E1 to Multimode Fibre, 5km
AC
MTU9200
£495.00
DC
MTU9200-DC
£495.00
E1 to Single-mode Fibre, Short-Haul, 20km
AC
MTU9210
£695.00
DC
MTU9210-DC
£695.00
E1 to Single-mode Fibre, Long Haul, 70km
AC
MTU9220
£795.00
DC
MTU9220-DC
£795.00
request datasheet:
71718
Abeo E3 to Fibre Converter
Cost-effective E3/DS-3 fibre extender.
•
•
•
•
•
•
These models provide a new level of
price/preformance for extending an E3/DS-3
G.703 signal over a pair of single-mode or
multimode fibres. The Abeo E3 will extend
E3/DS-3 over several kilometres.
The E3 models provide single-mode
short- haul, single-mode long-haul or
Abeo E3 to
Fibre Converter
(MTU9230)
Must be used in pairs.
Low cost E3/DS-3 fibre extender.
Switch select between E3/DS-3.
Minimal configuration of unit needed.
Compact unit & integral power supply.
multimode fibre interfaces using SC connectors.
The E3/DS-3 interface uses a pair of BNC
connectors. The Abeo E3 fibre converters
provide a clear channel or unframed E3/DS-3
path over the fibre. This means that the signal
can be either framed or unframed.
Abeo E3 to
Fibre Converter
(MTU9230)
Multimode
Fibre
E3 G.703
E3 G.703
Router
Site A
12
Router
Site B
TECH SPECS
E3/DS-3 Electrical Interface:
Tx Power — -8 to -15 dBm
Maximum Rx Input Power — -8 dBm
Rx Sensitivity — -8 to -31 dBm
Optical Loss Budget — -15 (-31): 16dB
Port — G.703, 75-ohm unbalanced
Interface — BNC (75-ohms)
Bit Rate — E3: 34.368 Mbps + 20 ppm; DS-3: 44.736
Mbps + 20 ppm
Physical:
Temperature — 0 - +45 C
Humidity — 0-95% RH, non-condensing
connector
DC Supply — -40 to -72 VDC, 200-100mA
Power Consumption — 6 watts approximately
when operating
O
Item
Code
Abeo E3
E3/DS3 to Multimode Fibre AC
MTU9230
E3/DS3 to Multimode Fibre DC
MTU9230-DC
Price
£995.00
£995.00
request datasheet:
71719
CONVERSION
E1 G.703/G.704 to V.35 Converter
Cost effective conversion without the fuss.
•
•
•
•
•
The MTU9012 connects switches and routers
to a structured E1 G.703/G.704 2.048-Mbps
leased line. Connecting a LAN bridge or router
to a 2-Mbps leased line requires a G.703
interface.
The MTU9012 spans the gap between the
synchronous interface of a bridge or router and
the E1 leased line on a fractional E1 basis of
64-kbps per timeslot. A maximum of 31
timeslots can be configured for a single E1 line.
If timeslot 16 is bypassed, a maximum of 30
timeslots can be accomodated.
The MTU9012 offers a V.35 interface and
BNC or RJ-45 connectors for the E1 Line
interface and is configured by setting
externally accessible bit-switches.
Item
Code
Price
E1 G.703/G.704 Framed to V.35 Converter
AC
MTU9012
£495.00
DC
MTU9012-DC
£495.00
Low cost G.703/G.704 to V.35 converter.
Minimal configuration required.
Compact unit and internal power supply
TECH SPECS
Line E1 Interface:
Port — G.703, 75 ohm unbalanced, 120 ohm blanaced
Interface — BNC (75 ohm), RJ-45 (120 ohm)
Framing — G.704 (with or without CR4) or unframed
Cable Lengths — RG59 = 600m; UR202 = 750m
DTE Interface:
Port — V.35
Interface — ISO2593 34-way female M-Rack
Bit Rate — 2.048 Mbps or N*64 kbps (n = 1 to 31)
Configuration:
Clocks — Internal, E1 Loop, Terminal, DTE Mode; Set
by dip switches
Setup — Start Timeslot: 1 to 31;
End Timeslot: 1 to 31; CRC4: Enable/Disable;
Timeslot 16 bypass: Enable/Disable
EMC — EN55022, EN50082
Environmental:
Humidity — 95% relative humidity,
non-condensing
Power Supply:
connector
-48VDC Supply — -36 to -72 VDC, 100-50 mA
Dimensions:
Rackmount — 4.4(H) x 20.2(W) x 13.2(D) cm
(without feet)
Tabletop — 4.8(H) x 20.2(W) x 13.2(D) cm
(with feet)
Black Box Explains
G.703 technology - save money without compromising connectivity.
Installing G.703 technology has traditionally been an expensive
outlay. The interface cards for branded routers tend to be very
expensive. However, more common interfaces such as X.21, V.35,
RS-449 or RS-530 are much less expensive. This is because the chipsets
required to make up an X.21 interface are readily available at far less
cost than G.703 equivalents.
Most telcos or telecom companies provide their Wide Area
Networks termination via a G.703 interface. These services throughout
Europe are presented to the user as E1 G.703 on either a pair of BNC
connectors (unbalanced 75 ohm) or on an RJ-45 connector (balanced
120 ohm). The speed is typically 2.048-Mbps or N x 64K up to 1.984
Mbps.
The most cost-effective solution is to purchase a router with a
standard serial interface such as X.21 or V.35 and a Black Box G.703-toX.21 converter. This will give a G.703 connection for the Wide Area
Network and present the router with the required serial interface. The
cost saving here can be huge.
The basic interface conversion is from G.703 to a choice, or
combination, of X.21, V.35, RS-449 and RS-530 standards. Within this,
Black box offers two main product streams of G.703 converters. These
are framed and unframed. Unframed converters offer full 2.048-Mbps
data stream conversion and are suitable for all unstructured circuits
such as E1, etc.
Framed converters enable G.704 circuits/services to be utilised at
speeds from a single 64K timeslot to 1.984-Mbps utilising all 31 available timeslots, or any N x 64K number between the two.
All the framed converters enable independent settings for CRC-4 (a
basic form of error checking used on framed or structured services),
data and clock inversion and all will enable the user to configure the
units to either master or slave clocking.
All of the converters connect to either a balanced (RJ-45) or
unbalanced (pair of BNCs) line. All are mains powered; however, some
are also available with a -48VDC supply instead, ideal for switch room
environments. Some units will support SNMP (Simple Network
Management Protocol) management, offering the user the
opportunity to monitor the quality of the connectivity provided.
For larger sites where multiple conversions are required, Black Box
offers several ranges of 19” (48.3 cm) mounted chassis-based solutions,
again with multiple power options and some with SNMP management
available.
Most units are configured through a combination of DIP switches
and jumpers, with some units providing the options of using VT100
style console access.
If you require help with configuration or would like Black Box to
preconfigure these units for you, then please do not hesitate to
contact us.
TM
13
EXTENSION and MULTIPLEXING
ApplianX
The easy way to convert your existing PBX to VoIP applications.
DPNSS,
Q.Sig, Q.931
•
•
•
•
•
DPNSS to Q.Sig Conversion.
Built-in web browser interface.
Easy to set-up and manage.
Supports both ISO and ECMA Q.Sig.
All supplementary services are fully
supported.
• Single page Wizard set-up.
TECH SPECS
Interfaces:
Ethernet — Separate private management interface
via front panel RJ-45
Telephony — (2) E1 Channels (30 simultaneous calls) or
(4) E1 (60 simultaneous calls)
The ApplianX from Black Box enables a
DPNSS PBX to be used in IP connectivity
applications which support Q.Sig.
The ApplianX supports up to 60 channels
of DPNSS and effortlessly converts the calls
for presentation to a Q.Sig circuit, and fully
supports all supplementary services. However,
to ensure compatibility with all PBXs, each
supplementary service can easily be switched
off to match the PBX set up.
This product ensures an easy switch over
from DPNSS to Voice over IP applications by
being very easy to set up and manage. An
HTTP server is built-in, as are password
protected access levels, so any HTML browser
will provide secure access to configuration,
administration, traffic monitoring and
diagnosis on a per user basis. To make life as
easy as possible, the ApplianX also comes
with a single page set-up wizard.
Signalling:
PSTN — DPNSS, Q.Sig (ISO and ECMA) and Q.931
Capacity — Up to 6 independent conversions between
DPNSS and Q. Sig
Features — Diversion (Immediate, On Busy, On No
Reply), Route Optimisation, Loop Avoidance, Call
Back When Free, Call Back When Next Available,
Message Waiting Indicator, hold, Call Offer,
Executive Intrusion, Three Party, Redirection, Data
Call, Bearer Service Selection, Network Address
Item
ApplianX
DPNSS-to-Q.SIG Gateway 2 trunk
DPNSS-to-Q.SIG Gateway 4 trunk
IP Gateway 1 trunk E1/T1
Extension, Add-On Conference, Do Not Disturb and
Centralised Operator
Management:
Configuration — Embedded web/HTTP interface
Monitoring — Comprehensive SNMP Traps
Diagnostics — Full protocol trace feature with
decoder included
Hardware:
Dimensions — 1U High, 19” wide Rackmount
Temperature — 0 to +40 C
Humidity — 20% to 80% RH noncondensing
Standards — EC Directive 2002/96/EC (WEEE), RoHS
Compliance, EU-EN55022, EN55024, USA-FCC part
15, CE certification, UL/CUL
o
Code
Price
CALL
CALL
CALL
CALL
CALL
CALL
ISU3001
ISU3002
ISU3003
ISU3004
ISU3005
ISU3006
ISDN Groomer II
Use your legacy PBX on new IP services.
• SS7 to SIP and IP to PRI Conversion (up to
40 trunks).
• A-law and u-law Conversion supporting
E1 to T1 conversion.
• Fully supports H.323 VoIP.
• Full supplementary services support.
• SNMP and NMS support through dual
10/100 RJ-45 Ports.
TECH SPECS
Ports:
ISDN Groomer II 1U — IP channels 30, 60, 120 or 240;
E1/T1 trunk options 1, 2, 4, or 8
IP Interfaces:
LAN protocol and connection — 10/100BASE-T,
Ethernet; dual port redundancy; dual RJ-45
Protocols supported — H.323 Version 2; SIP (RFC
3261); RTP; RTCP; TCP; UDP
Voice codecs — G.711; G.723.1A; G.726; G.729AB negotiated on a per call basis
TDM Interfaces:
Network Line Interfaces — E1/T1; software
selectable; 75R, 100R or 120R terminations
Network Connection — RJ-45/RJ-48C; adapter cables
supplied (8 E1/T1 and above); BNC via adaptor
SS7 support — ITU-T; China; and ANSI ISUP1; MTP3;
Fully or quasi-associated (‘A’ or ‘F’ links); Up to 4
14
links/link sets per local point code; load sharing
CIC/timeslot blocking facility
Legacy ISDN and CAS protocols supported — A
wide range of protocols including ETS300; T1RBS;
MFC R2; NI-2; DMS100; INS 1500; DPNSS and Q.SIG
Physical and Environmental:
Chassis — Open industry standard: 19” rack mount
1U PCI
Chassis Dimensions —
1U: 4.4(H) x 48.3(W) x 45(D) cm
Peripherals Supplied — Keyboard and mouse
Power Supply — 230/115VAC, 50/60Hz, dual
redundant
Power Consmuption — 500W
Operating Temperature — 0 to 30oC
Humidity — 10 to 90% non-condensing
Standards — EN55022/55024; FCC Part15; ASNZ3548
Safety Standards — CB; IEC950; UL; CUL
The new ISDN Groomer II from Black Box
enables conversion between existing legacy
equipment / lines and IP based PBX / lines.
The unit supports call routing features such
as CLI or DDI, least cost routing, and also
supports numbering plans, translation and
portability, fallback routing, black/white lists
and dual redundant SS7 routing.
The ISDN Groomer II is available as a 1U
rack mountable unit supporting up to 240 IP
channels and up to 8 E1 and / or T1 channels
for the 1U gateway.
6U expandable system also available,
please contact us for more details
Item
ISDN Groomer II (1U)
1 trunk, VoIP
2 trunks, VoIP
4 trunks, VoIP
8 trunks, VoIP
Code
Price
ISU4001
ISU4002
ISU4003
ISU4004
CALL
CALL
CALL
CALL
E3/DS3 Fibre Extender
Extend your high-speed circuits over fibre without the fuss.
•
•
•
•
•
•
•
Must be used in pairs.
Low-cost E3/DS3 fibre extender.
Switch select between E3/DS3.
Minimal configuration needed.
Compact unit and internal power supply
TECH SPECS
Single-Mode Short-Haul Line Interface:
Interface — Dual SC single-mode 8/125 µm
Tx Power — -8 dBm to -15 dBm
Max. Rx Input Power — -8 dBm
Rx Sensitivity — -8 to -31 dBm
Optical Loss Budget — -15 - (-31) = 16 dB
Power Supply Options:
connector
-48VDC Supply — -40 to -72 VDC, 200-100 mA
Power Consumption — 6 watts approximately when
operating
Guideline Distance Based on 1300 nm
Wavelength:
Single-Mode Short-Haul — 15 to 40 kms
Environmental:
Temperature — 0 - +50oC
Humidity — 0-95% RH, relative humidity,
non-condensing
Line E3/DS3 Electrical Interface:
Line Coding — E3: HDB3, DS3: B3ZS
E3 Bit Rate — 34.368 Mbps + 20 ppm
DS-3 Bit Rate — 44.736 Mbps + 20 ppm
EMC — EN55022, EN50082
Dimensions:
Rackmount — 4.4(H) x 20.2(W) x 13.2(D) cm
(without feet)
Tabletop — 4.8(H) x 20.2(W) x 13.2(D) cm
(with feet)
The MTU9240 provides a clear channel
or unchannelised E3/DS3 path over fibre.
This means that the signal can be either
framed or unframed.
The MTU9240 extends an E3/DS3 G.703
signal over a pair of single-mode or multimode
fibres. The MTU9240 will extend E3/DS3 over
several kilometres. The MTU9240 models
provide single-mode short-haul, single-mode
long-haul or multimode fibre interfaces using
SC connectors.
Item
Code
E3/DS3 Fibre Extender MTU9240
Price
£1,095.00
Abeo LAN Extenders
New LAN Extension for G.703, X.21 or V.35 networks.
• Four Auto-negotiating subscriber
10/100BASE-T ports.
• Auto MDI/MDIX switching on all ports.
• Wire speed local switching between
subscriber ports.
• Efficient HDLC packet handling on WAN
port.
• Serial version with X.21 interface.
• Must be used in pairs.
TECH SPECS
Approvals — EN41003, EN60950, EN55022, EN50082
Barriers — Full as per EN41003
Clocks — Supplied by DCE
Encapsulation — HDLC
Humidity — 95% RH noncondensing
MAC Address Table — 4096 addresses
Performance — OTR.001
Port Filtering — 148810 packets per second
Port Switching Rate — 148810 packets per second
Speed — 2.048 Mbps + 50 ppm unframed
Standards — E1 G.703 (unframed) or X.21
Temperature — 0 - 45 C
Interfaces — (1) G.703 on dual coax (75 ohm), (1)
G.703 on RJ-45 (120 ohm) switch-selectable, X.21 via
DB15 F or V.35 via 34-way female MRAC connector,
(4) Ethernet 10/100BASE-TX RJ-45 Female (Full- or
half-duplex)
Indicators — (2) LEDs: TX/RX Packet Alarm
Power — Internal, 100-250 VAC, 50-60 Hz, IEC320
input or -32 to -72 VDC, 100-200 mA
Weight — 1 kg
O
top: front view
bottom: rear view MXU9020 & MXU9021
The Black Box range of LAN extension
products offer cost-effective LAN extension
over G.703 or X.21 WAN links. The integrated
4-port LAN switch supports local switching,
thereby removing the need for external
switches or hubs in smaller LAN installations.
Full wire speed switching and filtering between
the 10/100BASE-T LAN ports is supported so
that only packets destined for the remote site
are forwarded over the link. This ensures you
make the most of your bandwidth.
These desktop extenders are fully
compatible with our MultiRack rackmount LAN
extension cards. For smaller point-to-point links
choose two desktop units. For larger
applications consolidate and manage multiple
cards at your central site and choose
standalone units for your remote locations.
Item
Code
Abeo LAN Extender
LAN over G.703 (AC Powered)
MXU9020
LAN over X.21 (AC Powered)
MXU9021
LAN over V.35 (AC Powered)
MXU9035
LAN over G.703 (DC Powered)
MXU9020-DC
LAN over X.21 (DC Powered)
MXU9021-DC
LAN over V.35 (DC Powered)
MXU9035-DC
Price
£495.00
£495.00
£495.00
£495.00
£495.00
£495.00
request datasheet:
71723, 71724
15
Opticon SM
Single-mode to multimode conversion at speeds
up to 155 Mbps!
Opticon STM-1
STM-1/OC-3 to fibre midspan mode converter.
Save money on long-haul Ethernet
extension. The Opticon SM provides
great functionality at a great price, all
in a compact plug-and-play chassis.
Connecting a switch or router to
single-mode fibre ususally requires an
expensive single-mode interface. The Opticon SM Fibre Converter spans
the gap between the multimode interfaces commonly available for use
within a building and the single-mode fibre used for connection to the
local exchange.
Opticon SM
Opticon SM
Single-mode
(MTU9009)
(MTU9009)
Fibre
Multimode
Fibre
Opticon STM-1
(MTU9010)
Multimode
Fibre
Multimode
Fibre
BNC
Electrical
SDH
Network
Opticon STM-1
(MTU9010)
BNC
Electrical
Router
Ethernet Switch
Single-mode
Fibre
Router
LAN
Site A
Site B
Code
Price
MTU9009
£695.00
MTU9009-DC £695.00
LAN
Item
Opticon SM (AC)
Opticon SM (DC)
The Opticon STM-1 fibre converter
delivers exceptional value and
performance when interfacing
between an STM-1/OC-3 electrical
interface and an STM-1/OC-3 fibre
interface. The payload is tranparent.
It provides a clear STM-1/OC-3 path over the fibre, which means that
the signal can be either framed or unframed, and all protocols are
transported transparently.
71722
Item
Code
Fibre to STM-1/OC-3 Converter
Multimode (AC)
Multimode (DC)
Single-Mode (AC)
Single-Mode (DC)
MTU9010
MTU9010-DC
MTU9011
MTU9011-DC
Price
£895.00
£895.00
£995.00
£995.00
71720
Opticon 232
High-speed, asynchronous RS-232/V.24
to fibre conversion.
Opticon 8
Synchronous serial to fibre conversion
at speeds up to 8 Mbps.
The new Opticon 232
RS-232/V.24 to Fibre converter has
enhanced features for RS-232/V.24
asynchronous extension, offering
data rates up to 256 kbps and
distances up to 70 kilometres over
single-mode fibre.
This compact standalone unit is fully transparent and plug-and-play.
The crossover function supports DCE to DTE, DCE to DCE or DTE to DTE
formats.
The fibre optic port is presented on a duplex SC connector.
Mulitmode and single-mode fibre interfaces are available.
The new Opticon 8 Serial to
Fibre converter enables faster
serial data transfer over a fibre
network. With EIA 530, V.35, V.36,
X.21 and RS-232 interfaces then
data rates of n*64kbps up to 8
Mbps is achievable over Multimode
or Single-mode fibre. This is typically twice as fast as a standard serial
converter and is offered with both AC mains and DC (-48VDC) options.
Item
Opticon 232
Multimode (AC)
Multimode (DC)
Single-Mode (AC)
Single-Mode (DC)
Code
ICU232
ICU232-DC
ICU232SM
ICU232SM-DC
16
Price
£395.00
£395.00
£495.00
£495.00
71728
Item
Opticon 8 Sync Serial to Fibre Converter
Multimode (AC)
Multimode (DC)
Single-Mode (AC)
Single-Mode (DC)
Code
Price
ICU2000
£450.00
ICU2000-DC £450.00
ICU2000SM
£550.00
ICU2000SM-DC£550.00
71727
High-Speed Fibre Multiplexer
The flexible fibre solution — made easy!
•
•
•
•
•
Easy to configure.
High-speed fibre uplink.
Supports both voice and data.
Single- and dual-power supply options.
Warranty — 1 Year
The highly flexible compact fibre optic
multiplexer is 1U high, fully modular and can
multiplex up to 16.2-Mbps circuits over fibre.
The MXU range offers users a system that they
can tailor and expand to meet the future
demands of their network.
From the rear of the chassis, one to four
quad E1, T1, Serial (V.35, X.21, RS-530), or
Ethernet Bridge cards are supported. All line
cards provide completely transparent
transmission of E1, T1, serial or Ethernet
regardless of frame mode or timeslot
assignment.
The MXU106x range can be fitted with a
wide array of fibre optic transport modules,
from short-range 2km mulitmode to longrange 120km single-mode. Each fibre module is
available with 1+1 protection to ensure high
availability of service. The MXU range can also
be equipped with WDM (Wave Division
Multiplexing) modules for transmission across a
single core of fibres.
TECH SPECS
E1 Interfaces:
Bit Rate — 2048 kbps
Line Code — Either HDB3 or AMI
Line Impedance — 75 Ohm BNC or 120
Ohm Twisted pairs (RJ-45)
Jitter Performance — According to
CCITT G.823
ITU Standards — G.703, G.706, G.732
TI Interfaces:
Bit Rate — 1554 kbps
Line Code — 8825
Line Impedance — 100 Ohm Twisted
pairs (RJ-45)
Jitter Performance — According to
CCITT G.824
ITU Standards — G.703, G.706, G.733
Interface Types — V.35, X.21, RS-530,
RS-449, RS-232/V.24
Data Rate (each channel) — n x 64
kbps (64 to 2048 kbps)
Line Code — NRZ
Clock Modes — Transparent, recovery,
external, internal
Ethernet Bridge Interfaces:
Interface Type — 10BASE-T, 100BASETX (RJ-45)
WAN Data Rate — 8192 kbps
Compliance — IEEE802.3, IEEE802.3u
Physical:
Dimensions — 4.3(H) x 43.8(W) x
25.1(D) cm
Weight — 4.5 kg
Power:
Voltage AC Source — 90-250 VAC
Voltage DC Source — 20-60 VDC
Frequency — 47 to 63 Hz for AC power
Power Consumption — 40VA
Environment:
Temperature — 0 to 50oC
Humidity — 0 to 90% noncondensing
78432
www.blackbox.co.uk
See our website for the complete range of
WAN and wireless products, plus thousands
more networking items.
The MXU range can be AC- or DC-powered
with the option of dual power supplies.
Management of the MXU range is via a
VT-100 RS-232/V.24 port or via an optional
Ethernet management module that supports
Telnet and SNMP. Alternatively, the MXU range
can be managed via the front panel LCD and
function keys. Management of the remote
MXU range is possible from the local unit with
the embedded communication channel
contained within the fibre link.
Item
First, select a chassis...
Multiplexer Chassis, 4 User Slots, 1 Fibre Slot,
Single AC Power Supply
Dual AC Power Supply
Single DC Power Supply
Single DC Power Supply
Single AC and Single DC Power Supply
...then add modules.
SNMP/Telnet Management Module
Single-Port 10/100BASE-TX Module
Quad E1 Module - (4) G.703
120 Ohm
Quad V.35 Module
Quad X.21 Module
Quad RS-530 Module
Quad RS-449 Module
Quad RS-232/V.24 Module
Single-Port Multimode Fibre Uplink
SC Connectors, 2 km
ST Connectors, 2 km
FC Connectors, 2 km
Single-Port Single-mode Fibre Uplink
SC Connectors, 15 km
ST Connectors, 15 km
FC Connectors, 15 km
Code
Price
MXU1061
MXU1062
MXU1063
MXU1064
MXU1065
£899.00
£944.00
£1,055.00
£1,277.00
£1,499.00
MXU1066
MXU1068
£500.00
£622.00
MXU1060-4RJ45
£622.00
MXU1060-4V35£644.00
MXU1060-4X21£622.00
MXU1060-4530£622.00
MXU1060-4449£622.00
MXU1060-4232£622.00
MXU1060-SC02£333.00
MXU1060-ST02£333.00
MXU1060-FC02£333.00
MXU1060-SC15£500.00
MXU1060-ST15£500.00
MXU1060-FC15£500.00
MXU1060-SC30£566.00
MXU1060-ST30£566.00
MXU1060-FC30£566.00
MXU1060-SC50£677.00
MXU1060-ST50£677.00
MXU1060-FC50£677.00
MXU1060-SC120
£888.00
MXU1060-ST120
£888.00
MXU1060-FC120
£888.00
17
Abeo Drop/Insert Multiplexer
Use this E1 G.703/G.704 Drop/Insert Mux to mix traffic on one leased line.
• High Spec E1 G.703 2.048-Mbps interface
(BNC or RJ-45).
• One data port (either X.21 or V.35) and
one E1 drop port.
across the network.
• Optional -48 VDC supply.
Mix voice and data traffic on a single E1
2.048-Mbps link. The DSU provides a fractional
E1 n*64kbps drop port for the PABX
equipment, and remaining E1 service
bandwidth is allocated to the X.21 or V.35 port
to carry taffic to/from a bridge or router
connected to a LAN.
The Abeo Mux can be used at either end of
the Wide Area link. Error conditions and usage
statistics are gathered and stored by the DSU.
Unit setup is done via a comprehensive menu
TECH SPECS
Cable Lengths — E1 BNC RG59: 600m; E1 BNC UR202:
750 m; E1 RJ-45 Belden 8132: 175m; E1 RJ-45 Belden
9841: 300m
Framing — G.704 (with or without CRC4)
Port — G.703, 75-ohm unbalanced (BNC) or 120-ohm
balanced (RJ-45)
Interface — BNC (75-ohm) or RJ-45 (120-ohm)
system which is accessed via a local or remote
terminal.
The optional SNMP Enabler permits
management via a LAN using an SNMP system.
DTE Interface:
Bit Rate — N*64 kbps (n = 1 to 31)
Line E1 Timing — Internal, DTE mode (CCITT cct 113),
through DTE timing
System — Non-volatile setup
Interface — X.21 15-way female D-type; V.24,
Ethernet 10BASE-T via RJ-45
Item
Code
Price
Drop and Insert Mux with SNMP
X.21/G.703
MXU9070M
£1,390.00
X.21/G.703
MXU9070M-DC£1,390.00
V.35/G.703
MXU9070M-V35
£1,390.00
V.35/G.703
MXU9070M-V35-DC
£1,390.00
request datasheet:
71729
Abeo 4 Drop/Insert Multiplexer
Use this E1 G.703/G.704 Drop/Insert Mux to make the most of your 2-Mbps connection.
• Mix voice and data on the same leased
line.
• High-Spec E1 G.703 2.048-Mbps interface
(BNC or RJ-45).
• Four data ports (either all X.21 or V.35)
and one E1 drop port.
• External Alarm relay port.
across the network.
The Black Box Abeo 4 Drop/Insert
Multiplexer is a drop/insert multiplexer that
will allow you to mix voice and data traffic on a
single E1 2.048-Mbps link. Whatever your
application, the Abeo 4 will ensure you make
the most of your 2 Mbps by providing you with
voice support and four separate data channels.
The Drop & Insert interface provides a
fractional E1 n*64 Kbps drop port for your
PABX equipment, and the remaining E1 service
bandwidth may be allocated to the four X.21
or V.35 ports to carry traffic to or from bridges
or routers.
Use the Abeo 4 Mux in mixed pairs at each
end of an E1 link. Error condition and usage
statistics are gathered and stored by the Abeo
4 and the local or remote connection. The
comprehensive and user-friendly menu system
TECH SPECS
Cable Lengths — E1 BNC RG59: 600m; E1 BNC UR202:
750 m; E1 RJ-45 Belden 8132: 175m; E1 RJ-45 Belden
9841: 300m
Framing — G.704 (with or without CRC4)
Interface — BNC (75-ohm) or RJ-45 (120-ohm)
18
DTE Interface:
Bit Rate — N*64 kbps (n = 1 to 31)
Port — X.21 or V.35
Timing — DTE mode (CCITT cct 113), through DTE
timing
Interface — X.21: 15-way female D-type; V.24,
Ethernet 10BASE-T via RJ-45
ensures a trouble-free installation, and SNMP
support allows you to manage the unit via your
existing SNMP management system.
Item
Code
Price
Drop and Insert Mux with (4) X.21 ports
BNC
MXU9072M
£1,495.00
BNC/DC
MXU9072M-DC£1,495.00
RJ-45
MXU9072M-RJ45
£1,495.00
RJ-45/DC
MXU9072M-RJ45-DC
£1,495.00
request datasheet:
71717
G.703 Ether Mux
Multiple E1 (T1)/Multiple Ethernet over fibre.
•
•
•
•
•
•
•
Connects up to 8 remote LAN destinations.
Supports (8) 10/100BASE-T downlinks.
Virtual concatenation down to VC-12.
(8) E1/T1 ports mapped into VC-12.
GFP framing with LCAS support.
SNMP remote management.
Warranty — 1 Year
MXU1100
The head office requires a full STM-1
connection, while the remote office sites
require only fractional STM-1 connections.
Because the bandwidth requirements
between the head and regional office are
high, a GFP session is configured to use
100 Mbps by concatenating 48 VC-12
tributaries. A further 10 VC-12s are
directed to the larger branch office, giving
20-Mbps bandwidth, while 5 VC-12s are
directed to the smaller office giving a
10-Mbps connection.
The Black Box G.703 Ether Mux
simultaneously supports up to eight E1 feeds
and up to eight Ethernet 10/100BASE-T feeds
over multimode or single-mode fibre. This can
be a private fibre connection laid between two
points with a G.703 Ether Mux at each end of
the link, or it can be used as a carrier Service
Provider product delivering multiple E1 and
Fast Ethernet over an SDH network.
Generic Framing Procedure (GFP)
encapsulation along with virtual concatenation
(VCAT) is used for efficient transportation
across the fibre and with VC-4/VC-3 or VC-12
granularity and Link Capacity Adjustment
Scheme (LCAS), it offers maximum benefit to
both service providers and end users in terms
of flexibility and bandwidth optimisation.
The G.703 Ether Mux supports IEEE 802.3x
flow control on all 10/100 ports to prevent
traffic loss when available bandwidth is
reduced. The management of the product can
be done either locally (via the console port) or
remotely (via the Ethernet management port
using SNMP or Telnet).
The Black Box G.703 Ether Mux offers the
capability of extending multiple LAN segments
across an SDH network. The G.703 Ether Mux1000 offers LAN + E1/T1 transport.
The G.703 Ether Mux presents LAN ports as
fully autosensing 10/100BASE-T interfaces with
manual override, thereby supporting any LAN
network infrastructure. It offers eight
independent LAN interfaces, each of which
may be transported to a remote location via
the SDH infrastructure.
The G.703 Ether Mux supports large frames
of up to 4096 bytes and is protocol and
payload transparent. It will pass VLAN tagged
frames, including “Q in Q” double tagged
frames and CISCO ISL, transparently end to
request datasheet:
71724
Regional Office
100BASE-T Switch
Head Office
10 Mbps
STM-1
(3) E1
PBX
PBX
STM-1
SDH
Network
MXU1100
LAN 100BASE-T
Switch
10 Mbps
STM-1
Branch Office
20 Mbps
STM-1
PBX
MXU1100
100BASE-T
end. To further optimise network utilisation,
the G.703 Ether Mux offers eight E1/T1 G.703
clear channel ports. Each E1/T1 may be mapped
into an individual VC-12 for mapping into the
remaining SDH payload.
The management of the G.703 Ether Mux is
either local via the console port or remote via
the Ethernet management port using SNMP or
Telnet. Both console and Telnet access methods
are password protected. Performance statistics
are available for all parts. Access via the
overhead data link is offered for integration
into standard network management schemes.
SNMP Version 1 is supported, including MIB-2
and traps.
PBX
MXU1100
100BASE-T Switch
Branch Office
Switch
SNMP traps will be generated based on
alarms for any of the network or user ports.
TFTP download of software and configuration
data is supported as a means of futureproofing the products.
A pair of changeover relays indicate alarm
conditions arising on the G.703 Ether Mux. The
major alarm relay is energised for normal
operation to ensure that a fault is signalled in
the event of power failure. The integral PSUs
are fully autosensing from 100 to 250 VAC, and
-48VDC powered versions are also available.
TECH SPECS
STM-1/OC-3 Network Port (Uplink)
Fibre Options — Multimode (11 dB), Single-mode
Short Haul (15 dB)
Framing — SDH STM-1, Sonet OC-3
Presentation — Duplex SC Fibre Transceiver
(8) E1/T1 USer Ports (Downlink)
Mode — Clear Channel
Presentation — (8) RJ-45, (NT)
Timing — Internal, Loop, Through, Network
10/100BASE-T User Ports (Downlink)
Mode — 10/100BASE-T, auto-negotiate, manual
Presentation — (8) RJ-45, automatic MDI/MDI-X
crossover switching
Support — 10 Mbps, 100 Mbps, Half or Full-Duplex
Indicator — Link Activity
Access — Local Console, Telnet , SNMP
Type — Menu-driven user interface
Interface — V.24 terminal, User Port, Network Port
TM
Environment
Humidity — 0 to 95% RH, non-condensing
Power Supply
AC Mains — 100-250VAC, 50-400 Hz, 400 to 200 mA
DC Supply — 0 to + 45OC
Power Consumption — Less than 40 watts
Physical
Weight — 5 kg
Item
Code
Multiple E1/Ethernet over MM Fibre (AC)
MXU1100
Multiple E1/Ethernet over SM Short-Haul Fibre (AC) MXU1101
Multiple E1/Ethernet over SM Long-Haul Fibre (AC) MXU1102
Multiple E1/Ethernet over MM Fibre (DC)
MXU1100-DC
Multiple E1/Ethernet over SM Short-Haul Fibre (DC) MXU1101-DC
Multiple E1/Ethernet over SM Long-Haul Fibre (DC) MXU1102-DC
Price
£2,495.00
£2,595.00
£2,695.00
£2,495.00
£2,595.00
£2,695.00
19
DSL Xtreme
A 22.8-Mbps broadband bridge that uses G.SHDSLbis.
•
•
•
•
22.8-Mbps Ethernet over copper.
5.7 Mbps per pair.
IEEE 802.3ah compliant.
Automatic rate adaption.
DSL Xtreme
(MXU1002A)
Bandwidth aggregation up to 22.8 Mbps
over 4 pairs of copper wires
Customer’s Ethernet Network
The BLACK BOX DSL Xtreme extends the
reach of Ethernet services to remote sites by
using standard twisted copper pairs. Designed
using EFM (Ethernet First Mile) Technology
(2BASE-TL), the DSL Xtreme provides a costeffective solution for both service providers
and enterprises to deliver symmetrical Ethernet
services up to 22.8-Mbps. Using the very latest
chip sets and encoding software, the DSL
Xtreme will work when most other DSL
modems fail.
®
Customer’s Ethernet Network
Extended Ethernet services to sites using
existing copper infrastructure.
Service providers and enterprises can offer
symmetrical broadband connectivity for
transparent Ethernet services, DSLAM
backhaul, wireless backhaul and other
applications. By leveraging existing copper
services and using the unique EFM bonding
technology, the Xtreme can bond up to 4 pairs
and deliver between 1- and 22.8-Mbps
Ethernet services to users.
TECH SPECS
LAN — (4) 10/100BASE-T ports (RJ-45),
Auto MDI/MDI-X
LAN Protocols — 802.1D Transparent bridging
Management — Console (RS-232/V.24, RJ-45),
Web Browser (HTTP), SNMP, Telnet ,
EFC (IEEE 802.3ah) OAM,
RCMP (Remote Control and Management Protocl),
Network Interface
Operating Temperature — 0 to 50 C;
Extended Operating Temperature: -40 to 65 C
Storage Temperature — -40 to 85 C
Relative Humidity — 95%, noncondensing
VLAN Support — Port based and tag based (802.1Q)
up to 4096 VLAN, Double Tagging (Q-in-Q), Priority
Remapping, VLAN Trunk mode
TM
o
o
o
DSL Xtreme
(MXU1002A)
WAN — ITU-T G.991.2 (2004),
2BASE-TL 65/65o encoding,
EFM Bonding (IEEE 802.3ah PAF),
RJ-45 connector to WAN,
Maximum 22.8 Mbps,
QoS support,
Rate control,
Egress Traffic Shaping,
Classification based on port
Power — AC: 85-264V, 45-65 Hz;
DC: 5V 3.0A (optional external adaptor)
Dimensions — 4.3(H) x 25.6(W) x 17(D) cm
Weight — 2.5 kg
19” Rackmountable (optional)
Comprehensive and easy OAM and P
Functions in provision.
The DSL Xtreme implements the IEEE
802.3ah standards, as well as an extended
management feature based on IEEE 802.3ah.
The Xtreme is compatible with any standard
Fast Ethernet interface from switches, routers
and SONET/SDH equipment.
The Fast Ethernet interface also enables the
DSL Xtreme to work as a smart Ethernet
Demarcation Device (EDD), providing
demarcation between the carrier’s WAN and
the enterprise LAN by monitoring network
status and operation at the customer’s site.
The DSL Xtreme’s management includes a
comprehensive Command Line Interface (CLI),
user-friendly GUI-based Web browser interface
and SNMP and Telnet .
Future-proof Ethernet traffic management
and QoS features.
The DSL Xtreme provides future-proof
features meeting Ethernet Quality of Service
(QoS) and Class of Service (CoS) requirements
by utilising 802.1q VLAN and DSCP capabilities,
stacked VLAN (Q-in-Q), four levels of priority,
traffic flow control and rate control. Traffic
management and QoS features enable service
providers to offer highly profitable and valueadded services.
TM
Item
DSL Xtreme
2-Pair
4-Pair
20
Code
MXU1002A
MXU1004A
Price
£958.00
£1,078.00
G.SHDSL Voice and Data Modem
Multi-purpose G.SHDSL multiplexor.
• Up to (36) 64 kbps (2.304 Mbps) over one
copper pair.
• Up to (72) 64 kbps (4.608 Mbps) over two
copper pairs.
• Support for n x 64 kbps via built-in TDM.
• LAN to LAN connection via Internal Filter
Bridge technology.
• E1 port for framed data (G.703/G.704) or
unframed data (G.703).
• X.21/V.11 serial port for DTE devices.
• Long range over unshielded twisted pair
(UTP) cable.
The new multi-interface G.SHDSL Voice and
Data Multiplexor from Black Box enables users
to send E1, X.21 and LAN traffic over twisted
pair copper cable using the G.SHDSL standard
ITU G.922.2. The unit can use a single pair or
two pairs of copper cable to achieve speeds of
up to 2.304 Mbps (single pair) or 4.068 Mbps
(two pairs), and each of these data rates can be
broken down into multiple 64 kbps time slots.
This enables the bandwidth to be divided
between each of the available interfaces
simultaneously up to the total available.
The E1 port is presented as G.703/G.704 120
Ohm RJ-45 female connector and can be
configured to handle framed data — ideal for
PBX communication, or unframed data —
suitable for most other uses.
The X.21 serial interface is presented as a
DB15 way D-Type female port configured as a
DCE, but can also be configured for other
interface types by using a suitable adaptor
cable.
The Ethernet port is presented as an RJ-45
female connector and supports 10BASE-T
connections. The port can be configured to
support either destination filtering or no
filtering.
Item
Code
G.SHDSL Voice and Data Modem
MXU1005A
Price
£944.00
CAT5 Line Driver
The affordable, plug-and-play solution for controlling RS-232/V.24 equipment up to 910 metres away!
• Put your RS-232/V.24 equipment —
including computers, routers, firewalls,
dumb terminals and even home security
alarm systems — anywhere you want it, up
to 910 metres away.
• Use inexpensive CAT5 cable and break the
RS-232/V.24 distance limitation.
• Plug-and-play! The driver is a pure
hardware solution with no software
conflicts.
• Provides full-duplex transmission and
hardware handshake signals. No need for
setup or configuration.
• Use one power supply at either end for
distances under 300 metres; use a power
supply at each end for distances from 300
to 910 metres.
• Ideal for a wide variety of applications:
- Set up an outdoor touch screen and
control it from indoors.
- Access servers in a secure location.
- Control presentations remotely.
• Warranty — 3 Years.
Item
Code
Price
CAT5 Line Driver
DB9
ME890A
£140.00
Includes (1) local unit, (1) remote unit and (2)
power supplies
Special
Offer Price
£140
TECH SPECS
Cable Requirement — CAT5 shielded
Distance (Maximum) — 910 m
Speed (Maximum) — 57.6 kbps
Connectors —
Local unit: (1) DB9 F, (1) RJ-45, (1) power jack;
Remote unit: (1) DB9 M, (1) RJ-45, (1) power jack
Power — Input: 100-240 VAC; Output: 12VDC power
adaptor
Operation — Point-to-point, full-duplex
Interface — RS-232/V.24
Weight — 0.1 kg
21
VDSL Quadband Solutions
Use your telephone wires to bring the network where it’s needed.
• Newest Quadband technology.
• Up to 24 Mbps bandwidth symmetrical.
• Transmits Ethernet and analogue telephony
transparently over two wires.
• Single kits for one connection are available.
• Aggregation units for 8 or 24 switched VDSL ports
available.
Special
Offer Prices
Black Box VDSL Quadband technology gives you more reliability,
stability and performance than other solutions on the market. More than
that, this is a complete system to build single connections or VDSL
networks with numerous ports.
VDSL Quadband Extender Kit
The MEG101AE-R2 is a complete set with one transmitter and one receiver that is completely plug-and-play. Your connection is completely
transparent.
VDSL Quadband 8-Port Switch
The MEG801AE-R2 is the small combination unit. Giagbit Ethernet
ports (10/100/1000) enable you to bring enough network bandwidth into
the switch. The second Gigabit Ethernet port is ideal for cascading an additional VDSL Quadband switch. For simple and easy installation, all line
and phone connections are RJ-11. The switch has complete SNMP management features to maintain and control your VDSL network.
Use MEG2401AE-R2 if you need more ports and more port delay density. In just 1U, you can start 24 VDSL lines. The 24-port switch has Gigabit
Ethernet ports and complete SNMP management as well, but operates
with Telco (RJ-21) connectors.
48702
VDSL Quadband Receiver
These are the single receivers to connect to the 8- and 24-port
switches. It’s a complete system with investment protection. Since the
receiver for the single connection kit is exactly the same for usage with
the switches, you can easily migrate from one to more connections. There
is no need to buy a complete new system.
Mounting Options
The transmitters and receivers are sized for desktop use. Alternatively,
you can mount them to DIN RAILs by ordering DIN-RAILMC2 and
MEG101-DIN for each transmitter or receiver. The switches are intended
for rack mounting, and brackets are included.
How to order
For a system with one
connection, order:
(1) MEG101AE-R2
For a system with up to 8
connections, order:
(1) MEG801AE-R2 and
(1-8) MEG101RAE-R2
For a system with more than
25 and less than 48
connections, order:
(2) MEG2401AE-R2 and
(25-48) MEG101RAE-R2
For DIN rail mounting one
receiver, order:
(1) DIN-RAILMC2 and
For a system with more than 8 (1) MEG101-DIN
and less than 24 connections,
order:
For DIN rail mounting a
(1) MEG2401AE-R2 and
complete set (transmitter and
(9-24) MEG101RAE-R2
receiver), order:
(2) DIN-RAILMC2 and
(2) MEG101-DIN
MiniBridge 10/100BASE-T Ethernet Extenders
Expect BIG performance from these tiny bridges — high bandwidth and high throughput.
• Remote, self-learning bridges provide 10/100BASE-T Ethernet
connectivity.
• The 4-Wire Point-to-Point (LB0100A-4W) model extends a 10/100
LAN point-to-point up to 700 metres over four wires!
• WAN interface models enable you to use existing devices such as
routers, CSU/DSUs, multiplexors and modems to bridge to
synchronous WANs.
• Great for campus settings and office parks.
• Use the full bandwidth for a throughput of 19,700 packets per
second. Ideal for real-time applications.
• Support packet sizes of 1536 bytes for transparent forwarding of
VLAN frames.
• Fault propagation minimises downtime,
enabling fast rerouting.
22
• Learn MAC addresses
automatically.
• Operate in half- or fullduplex.
• Automatic MDI-X enables
you to use straight or crosspinned cables.
• Feature two prority queues.
• Small and economical. Fits
into the palm of your hand.
• Simple plug-and-play
installation.
Special
Offer Price
£380
LB0100A-4W
Telephone System
(PBX)
VDSL 8-Port Switch
(MEG801AE-R2)
Incoming Ethernet
from your LAN
VDSL Receivers
(MEG101RAE-R2)
Laptop
Performance and Quadband Technology
Up to 600 metres: 24 Mbps symmetrical.
How much bandwidth you get and how far you can go depends on
the quality and diameter of your wires. Also, every cross connect you
have in between limits the distance. Due to the advanced Quadband
technology, VDSL lines running nearby do not influence each other like
with standard VDSL technologies. Quadband means that the VDSL
devices detect used frequencies and select from different frequencies to
use for transition.
TECH SPECS
VDSL Quadband Transmitter and
Receiver:
Conenctors — (1) 10/100BASE-TX
(RJ-45) LAN, (1) Analogue telephony
port (RJ-11), (1) VDSL line (RJ-11)
Power — External wall mount power
supply; Primary 100-240 VAC;
Secondary 5 VDC, 1A
Dimensions — 9.5(H) x 11(W) x 2.4(D)
cm
VDSL Quadband 8-Port Switch:
Protocols — GVRP, GARP, 802.1p/q,
802.1v, 802.3ad, IGMPv2, 802.1d
Port Mirroring, Broadcast Storm
Filter, MAC Address Filtering SNMP,
RMON, HTML, Telnet and Console
Management
Connectors —
(2) 10/100/1000BASE-T (RJ-45) LAN
(8) Analogue telephony port (RJ-11)
(8) VDSL line (RJ-11); (1) RS-232/V.24
DB9 console
TM
Power — Internal power supply IEC320;
100-240 VAC
Dimensions —
4.4(H) x 25.5(W) x 43.5(D) cm
VDSL Quadband 24-Port Switch:
Connectors — (2) 10/100/1000BASE-T
(RJ-45) LAN, (1) Telco RJ-21 for 24
analogue telephony ports, (1) Telco
RJ-21 for 24 VDSL lines, (1) RS232/V.24 DB9 console
Protocols — GVRP, GARP, 802.1p/q,
802.1v, 802.3ad, IGMPv2, 802.1d
Port Mirroring, Broadcast Storm
Filter, MAC Address Filtering SNMP,
RMON, HTML, Telnet and Console
Management
Power — Internal power supply IEC320;
100-240 VAC
Dimensions —
4.4(H) x 25.5(W) x 43.5(D) cm
TECH SPECS
Buffers — Up to 120 frames for 64-byte frames
Distance (Maximum) — LB0100A-4W: 700m;
WAN models: Dependent on customer link
Frame — 1536 bytes maximum
Latency — 64-byte frames: 66-µs; 1536-byte frames: 1400-µs
MAC Addresses — 2K
Protocol — HDLC
Speed — LAN side: 10 or 100 Mbps; Extension side: LB0100A-4W: 5 Mbps at 700m; 10
Mbps at 500m; WAN models; Dependent on customer WAN link; up to 2.048 Mbps
Standards — IEEE 802.3
Throughput — 19,700 pps for 64-byte frames; 802 pps for 1536-byte frames
Connectors — All: LAN side: (1) RJ-45 shielded; Extension side: LB0100A-4W: 5-screw
terminal block; LB0100A-V24, LB0100A-530: DB25 F; LB0100A-V36: DB37 F via
adaptor cable; LB0100A-V.35 F: M/34 F via adaptor cable; LB0100A-V35M: M/34 M
via adaptor cable; LB0100A-X.21 F: DB15 F via adaptor cable; LB0100A-X21 M:
DB15 M via adaptor cable
Indicators — LEDs: Power, WAN, LAN, 100
Power — 100-240 VAC switching power supply, external
Dimensions — 6.9(H) x 5.3(W) x 1.8(D) cm
Weight — <0.1 kg
Phone
Laptop
VDSL Receivers
(MEG101RAE-R2)
Phone
Laptop
Phone
Item
Code
Price
VDSL Quadband Solutions
Complete Set for One Connection (1 Transmitter, 1 Receiver)
VDSL Quadband Extender Kit
MEG101AE-R2 £212.00
Aggregation Units
MEG801AE-R2
£900.00
MEG2401AE-R2
£2,899.00
Receiver for use with Aggregation Units
VDSL Quadband Receiver
MEG101RAE-R2
£154.00
Transmitter as spare part
VDSL Quadband Transmitter
MEG101TAE-R2
£154.00
Accessories
Spare Power Supply for International Use
PS649-R3
£33.30
Faceplate to Mount Transmitter/Receiver with DIN-RAILMC2
to DIN-Rail
MEG101-DIN £14.00
DIN-Rail Mounting Kit
DIN-RAILMC2 £23.58
www.blackbox.co.uk
See our website for the complete range of
WAN and wireless products, plus thousands
more networking items.
Item
Code
Price
MiniBridge 10/100BASE-T Ethernet Extenders
with 4-Wire Point-to-Point Interface 5-Screw Terminal Block
LB0100A-4W £380.00
with WAN Interface
RS-232/V.24 DB25
Female
LB0100A-V24 £380.00
RS-530 DB25
Female
LB0100A-530 £380.00
RS-442/449/V.36 DB37
Female
LB0100A-V36 £380.00
V.35 M/34
Female
LB0100A-V35F £380.00
Male
LB0100A-V35M£380.00
X.21 DB15
Female
LB0100A-X21F £380.00
Male
LB0100A-X21M£380.00
NOTE: Shielded CAT5 cable is recommended.
23
Serial Series Fibre Extenders
Flexible, united serial/fibre extension solutions.
•
•
•
•
•
•
Flexible clocking - internal/external.
Support for X.21, RS-530, V.35 interfaces.
Fibre optic ST or SC connections.
Configurable up to 8 Mbps.
Multimode and single-mode options.
Rackmountable and compatible with the
Serial Chassis.
The Serial Series family of standalone fibre
media extenders is available in a number of
different models that work as standalone units
or as line cards for placement in the Serial
Chassis (RMUMT-AC or -DC) when used with
the optional rackmount ears. Provide
high-speed synchronous data transmission over
fibre optic cable. All have HD26 female DCE
pinned interfaces and inlcude an appropriate
converter cable with a female connector for
• n x 64 kbps to 2048 kbps.
• n x 256 kbps to 8960 kbps.
• Configurable FEF (Far End Fault)
detection to confirm both RX and TX of
fibre link.
your DTE equipment. A female DTE cable is
also supplied with each unit for connectivity to
DCE equipment for onward linking of serial
circuits. All versions support DIP switch
configurable speeds up to 8 Mbps. N x 64
speeds up to 2.048 Mbps are also fully
supported, along with the n x 256 kbps speeds
up to the 8.192 Mbps (8960 Kbps) maximum
supported speed.
TECH SPECS
Data Port —
X.21 - DB15F DTE or DCE (via included cable),
V.35 - MRACF DTE or DCE (via included cable),
RS-530 - DB25F DTE or DCE (via included cable),
RS-449 - DB37F DTE or DCE (via included cable)
Humidity — Operating: 20 to 80% noncondensing;
Storage: 10 to 90%
Optical Port — Either ST or SC
Temperature — Operating 0 to 50 C;
Storage: 0 to 70 C
Wavelength — Multimode: 1310 nm;
Single-mode: 1310 nm
Indicators — (9) LEDs: Power, Fibre Link, TD, RD, RTS,
CTS, DCD and Test mode
Data Rate — V.35/RS-530 up to 8960 Kbps;
n x 64 kbps, where n=1 to 32 (64-2048Kbps);
n x 256 kbps, where n=1 to 32 (2304-8960Kbps)
o
o
Line Code — NRZ
Clock Modes — Transparent, Recovery (from
Optical), External (from Datacom), or Internal (from
Crystal)
Control Signals — CTS Constantly on or follows RTS
DSR Constantly on except during test loops, DCD
Constantly on except during optical signal loss
Test Loops — LLB (Local Loop Back)/RLB (Remote
Loop Back), RRLB (Far and Remote Loop Back). All
loops test for both fibre and data port.
Power — Input: 230 VAC + 10% @ 57-63 Hz; Output:
9 VDC @ 1A
Power Consumption — < 4 watts
Dimensions — 12.2(H) x 8.5(W) x 2(D) cm
Weight — 0.34 kg
Item
Code
Price
Serial SA X.21 to Multimode Fibre Extender
ST
MT1080MST
£777.00
SC
MT1080MSC
£777.00
Serial SA X.21 to Single-Mode Fibre Extender
ST
MT1080SST
£833.00
SC
MT1080SSC
£833.00
Serial SA V.35 to Multimode Fibre Extender
ST
MT1081MST
£777.00
SC
MT1081MSC
£777.00
Serial SA V.35 to Single-Mode Fibre Extender
ST
MT1081SST
£833.00
SC
MT1081SSC
£833.00
Serial SA RS-530 Multimode Fibre Extender
ST
MT1082MST
£777.00
SC
MT1082MSC
£777.00
Serial SA RS-530 Single-Mode Fibre Extender
ST
MT1082SST
£833.00
SC
MT1082SSC
£833.00
Serial Series Chassis
Truly universal 16-channel media conversion/extension platform.
•
•
•
•
•
•
16 slots for extension cards.
SNMP, Telnet, VT100 management option.
Multimode and single-mode fibre options.
Dual PSU option for high availability.
3U high and 19” rackmounting.
Warranty — 1 Year
The Serial Chassis is a 16-channel media
conversion/extension chassis. The 3U high, 19”
rack-mountable chassis supports the full range
of Serial Series cards, making the Serial Chassis
a truly universal platform for all your extenison
requirements.
The Serial Chassis also offers optional
redundant power and SNMP management.
Another unique feature of the Serial Chassis is
line cards (Serial Series Cards) which may either
be used as standalone extenders, or placed in
the rack by the removal of a side panel and the
addition of optional rack ears (RMUKIT).
The extension cards are all hot swappable
to ensure continuous service should cards need
to be inserted or removed. Both multimode
and single-mode extenders can drive signals up
to 120 kilometres.
When the Serial Series cards are placed in
the Serial Chassis (RMUMT-AC or -DC) along
with the SNMP/VT100 management interface
(RMUMT-SNMP), the card status, type, version,
TECH SPECS
Item
Serial Chassis, 3U, AC PSU
Serial Chassis, 3U, DC PSU
Serial Chassis Management Card (SNMP/VT100)
Power — AC Power: 90 to 264 VAC;
DC Power: -18 to -56 VDC
Dimensions — 13(H) x 28(W) x 44(D) cm
24
TM
fibre link status, data link status and alarms can
all be displayed and monitored. There are also
configuration options to enable or disable the
port, reset the port, set the data rate, modify
the clock mode, and initiate local or far-end
loop back tests.
Code
RMUMT-AC
RMUMT-DC
RMUMT-SNMP
Price
£438.00
£470.00
£470.00
SIMULATION
Satellite Simulator 3
Advanced Serial and IP Satellite Simulation.
Save 20%
off list price
valid until 30/06/09
The Satellite Simulator 3 builds on Black
Box’s many years experience in the field of
satellite link simulation. Satellite operators
these days have a wealth of technologies at
their fingertips, but as networks such as
Inmarsat BGAN, Vipersat or iDirect push
boundaries in capability, so users need to
address their applications ability to be
supported over such networks.
Even so, most operators still utilise a mix of
serial and IP satellite networks. The Simulator
3 addresses both types of environment,
incorporating both serial link simulation as
well as IP satellite network simulation in the
one, handheld device.
Based on the existing V50plus platform,
the Simulator 3 incorporates a specialist
software platform which delivers incredible
testing functionality - from the most basic,
reliable point-to-point links up to 5Mbps
through to emulating multinode IP networks,
with restricted QoS, packet or bit errors and
of course, satellite delay.
The Simulator 3 can be ordered with just
the serial functionality, or with both the serial
and the IP functionality enabled.
Getting Simulated
The Simulator 3 is a simulation tool
capable of representing a baseband
synchronous satellite WAN link between two
ports. It can operate at rates up to 5.12 Mbps
and is capable of introducing representative
delays of up to 10 seconds from end to end,
whilst also injecting errors or packet
impairments according to a highly versatile
range of rates and distributions. The unit may
be operated either with fixed settings for
constant simulation tests or from internal
scripts which allow the user to design specific
profiles where the Simulator 3 provides a
powerful and accurate means of testing the
robustness of a system or application before it
is deployed over live satellite bandwidth.
The base unit presents the same
connectors for each port, with a high-density
15-way D-type port for serial connection
together with a 10/100BASE-T Ethernet jack
for IP LAN connection at each end of the box.
The unit accepts 12VDC power and has a
locking mini-DIN connector for RS-232
management and control. An option slot at
each end of the enclosure can house an 8-way
10/100BASE-T Ethernet switch module, which
replaces the 2 standard ports with 16 for
added connectivity between the two LANs. A
Power-over-Ethernet (PoE) version of this
module is also available.
Serial Simulation
The Simulator 3 benefits from the same
wide range of interface standards (V.11, V.35,
• Two serial ports (user/software selectable
interface).
• Two 10/100 BASE-T ports (original 16 port
version).
• Various packet and QoS based scenarios.
• 5Mbps max data rate.
• Delay up to 10 seconds.
• Constant, Random and Gaussian errors.
• Asymmetric delays, errors and data rates.
• Scripting capabilities.
RS-232, RS-449, RS-530) as the multiplexer
products and may similarly be configured for
DCE or DTE presentation; these parameters
may be set independently on each port by
software selection. All data received on Port 1
is transmitted by Port 2 and vice versa, with
simulation parameters being applied
independently to each data stream. Clocking
flexibility is provided either to allow the unit
to generate the port clock itself or to onwardlink it to the other port. The data rate may be
configured over a range from 1200bps to
5.12Mbps, with the rates of any external
clocks being calibrated and displayed
continuously.
Fixed delays are configurable for each
data stream over the range from 10ms to 10s
in steps of 1ms. The unit keeps track of the
actual delay between the ports if the
difference between the actual and
configured delay exceeds a threshold as a
result of external clock variation, then the
data-stream is reset to restore the delay to
the configured value.
Monitoring
Station
128kbps
128kbps
5Mbps
5Mbps
(TSU1020)
Router or
Multiplexor
Router or
Multiplexor
Item
Standard
with IP
IP Switch
E1/T1 Card
IP Upgrade
Code
TSU1020
TSU1021
TSU1022C
TSU1023C
TSU1024C
request datasheet:
Price
£4,579.00
£5,818.00
£681.00
£1,183.00
£1,362.00
98989
25
NETWORK TIMING
TimeNet UK GPS Master NTP Time Server
NTP master reference clock for CCTV & Access Control applications.
Save 20%
off list price
Accurate universal atomic clock reference.
Supports all NTP compatible devices.
Ideal for CCTV and DVR applications.
Far lower cost than competing products.
Ideal for closed or secure networks.
Direct network interface for remote siting.
Simple setup - one IP address.
Automatic GPS lock and time sync.
Extremely compact design.
Indoor location (antenna on a window).
Integral watchdog for long-term reliable
operation.
• Robust, wall mounting, self contained
unit.
• Wide operating temperature range.
• Very low power use.
•
•
•
•
•
•
•
•
•
•
•
TimeNet provides a low-cost solution to the
problem of providing accurate reference time
signals for CCTV recording equipment.
CCTV and digital video recorder (DVR)
installations require accurate reference time
signals for synchronisation of system clocks to
ensure that they are always set at precisely
the right time. It is crucial that all recrodings
are accurately time-stamped, especially for
evidential purposes. Many DVR products,
especially those which are PC-based, have
inaccurate internal clocks which drift by many
seconds per week. Considering that DVR
systems may be left unattended for months
on end, it is easy to see that the time settings
can end up being in error by many minutes.
The traditional solution to providing an
accurate reference time has been to use an
atomic clock radio receiver or GPS sensor
linked to an expensive rack-mounted master
clock server, typically with serial-only output.
Network output versions tend to be even
more expensive. For this reason, master
reference clocks are normally only used in
very high-end installations such as city centres,
airports and prisons. timeNet integrates the
GPS receiver and master NTP clock server into
a single device which can be directly
connected to the network. TimeNet is
extremely compact, can be wall-mounted,
uses very little power and is less than half the
cost of competing solutions.
valid until 30/06/09
TimeNet installation and setup
The time server unit is very simpe to install
and set up. The GPS antenna is included with
the TimeNet product. The antenna itself is
provided with a self-adhesive surface which
can be fixed to any window which has a view
of some sky (to pick up the GPS satellite
transmissions). The TimeNet unit can be
positioned anywhere within the 3m reach of
the antenna lead, and may be conveniently
wall-mounted with the integral brackets
supplied.
TimeNet is then connected to the network
through its RJ-45 connector directly to the
CCTV/DVR network using a standard CAT5
cable (up to 100m long). The TimeNet setup
program is run on any Windows PC, and the
only parameter to set is the desired IP address
of the TimeNet device. This completes the
time server installation. Any DVR or other
NTP-compatible network devices can now be
programmed to get their NTP time signals
from the IP address of the TimeNet server.
About GPS
GPS is a global satellite system used
primarily for position location, using very
accurate atomic clock references. GPS signals
are far less prone to interference than
traditional national radio clock signals. Thus
TimeNet is a universal solution which can be
used anywhere in the world.
TECH SPECS
Time Source — GPS Satellite
Protocol — NTP Stratum 1 Time Server
Accuracy — Ethernet NTP +/- 100 ms overall GPS
source +/- 0.1µs
Antenna — GPS sensor on 3m cable (included)
Connectivity — 10/100BASE-T Ethernet RJ-45
Status Indicators —
Green LED - long pulse: OK; - short pulse: no lock.
Amber LED - network connectivity
Item
TimeNet UK GPS Master NTP Time Server
TimeNet European GPS Master NTP Time Server
26
Power — 10-40 VDC External power supply (included)
Power Consumption — 0.9W
Dimensions — 3.3(H) x 6.7(W) x 9.2(D) cm
(8.6(W) cm with wall mounting brackets)
Operating Temperature — -15 tom 75 C
Relative Humidity — 95% noncondensing
o
Code
TIMES-UK
TIMES-EU
Price
£549.00
£549.00
About Time Zones
UTC is effectively a GMT reference time
and TimeNet provides this via NTP as a
universal reference. It is the task of the
network client (i.e. DVR or other client device)
to look after the local time zone setting for
the country or zone location, including any
local or national variations to daylight savings
time or equivalent.
About UTC Time
Universal co-ordinated time is an official
world wide atomic clock standard for time,
agreed by national standards around the
world. UTC time copes with variations in the
earth’s rotation by the introduction of
leap-seconds at predefined intervals. GPS time
references incorporate this automatically.
Therefore TimeNet will continously provide
an accurate UTC clock reference
automatically.
About NTP
NTP stands for Network Time Protocol and
is a universal standard for time
synchronisation of computers or other devices
on a network. TimeNet is NTP-compatible and
acts as a time server for any NTP-enabled
client.
Setup Program
The simple setup program connects to
TimeNet by entering the default IP address.
The required IP address is simple entered and
applied.
Indicators
The indicators show GPS Lock and
Time Sync status.
GPS Lock:
Green = sat.lock.
Red = no sat.lock.
Grey = not yet determined.
Time Sync:
Green = sync. to GPS.
Red = no sync. to GPS.
Grey = not yet determined.
NETWORK TIMING
GPS Network Time Servers
Now all your network devices know what time it is.
• Keep the time of network devices
accurate.
• Supports NTP client/server and NTP
broadcast.
• Choose from tabletop, rackmount and DIN
rail models.
• The DIN rail and rackmount models
feature an extendable outdoor antenna.
• Warranty — 2 Years.
The GPS Network Time Server from Black
Box is an economical and efficient way to keep
your network’s time.
What’s Included
LEG9090AE:
• Tabletop GPS Network Time Server.
• Manual.
• External Power Supply.
• Indoor GPS antenna with 3-metre
antenna cable.
LEG9092AE:
• DIN Rail GPS Network Time Server.
• Manual.
• Outdoor GPS receiver with 8-metre
extendable twisted-pair cable.
• Spare fuses and connectors.
LEG9095AE:
• Rackmount GPS Network Time Server.
• Manual.
• Outdoor GPS receiver with 8-metre
extendable twisted-pair cable.
• Power Cable.
• Spare fuses and connectors.
• Rackmount ears.
Keeping accurate time is important when
you have widespread networks or automted
industrial devices. Without accurate
timestamps, who knows when that error
message came in and what time that
transaction took place? You can’t rely on
computer clocks - they can be off by as much
as five minutes a day.
The GPS Network Time Server is an
automated time distribution that accurately
and consistently sets the time on all your
network computers from servers to desktop
computers. It does this by getting the correct
time from the GPS satellite constellation and
then using Network Time Protocol (NTP) to
distribute it throughout your network.
The Tabletop model (LEG9090AE) has a
GPS antenna desgined to be placed indoors
next to a window.
The DIN Rail and Rackmount models
(LEG9092AE and LEG9095AE) use an outdoor
(IP65) antenna that can be located up to 200
metres from the time server. The GPS signal is
transmitted to the time server over twisted
pair cabling.
TECH SPECS
Connectors —
LEG9090AE: (1) RJ-45 for network, (1) MMCX for
GPS antenna, (1) DB9 for reset and special features,
(1) power (external power supply included);
LEG9092AE: (1) RJ-45 for network, (1) terminal
block for antenna and power;
LEG9095AE: (1) RJ-45 for network, (1) DB9 for GPS
antenna, (1) DB15 for special features
Power Supply —
LEG9090AE: 100-240 VAC, 50-60Hz, external
LEG9092AE: 9-24 VDC from DIN rail
LEG9095AE: 100-240 VAC, 50-60Hz, external
Environmental —
Operating Temperature: -25 to +55OC
Operating Humidity: 50 to 90% non-condensing
Outdoor Unit: IP65
Dimensions —
LEG9090AE: 4H x 8.7W x 15D cm
LEG9092AE: 9.5H x 9.5W x 4.5D cm
LEG9095AE: 2.5H x 44.5W x 11D cm
Item
Code
GPS Network Time Server
Tabletop
LEG9090AE
DIN Rail
LEG9092AE
Rackmount
LEG9095AE
request datasheet:
Price
£642.00
£649.00
£1,393.00
98989
FireWire PCMCIA Card
Two full 6-pin FireWire connectors and a USB on a single card.
• Two 1394a 6-pin ports at up to 400 Mbps.
• One USB 2.0-compliant port up to 480
Mbps.
• Compliant with PCI Express Specification,
revision 1.0a.
• Supports Windows Vista IEEE 1394
(FireWire 400).
• Compliant with IEEE 1394 Open Host
Controller Interface specification release
1.1 and IEEE Std 1394a-2000.
®
Add two IEEE 1394 ports supporting 100,
200 and 400 Mbps using the T1 Chipset, and
one USB 2.0 port supporting 1.5, 12 and 480
Mbps, in one easy step by adding in the ExpressCard 34 PCMCIA card. The card features
built-in drivers, is fully plug-and-play compliant
and even works with both Mac and Windows.
The card has an external 1.3-mm DC power
jack for an external power supply should one
be required.
Item
Code
FireWire PCMCIA Card IC760C
Price
£54.39
27
WAN
Bundling DSL lines in DSLAMs.
Today, with more than 750 million sites around the world wired
for telephone service, the basic infrastructure for Digital Subscriber
Line (DSL) is already in place. Implementing DSL is mostly a matter of
getting the proper hardware to the customers, telcos, ISPs and other
providers.
Hardware considerations for DSL service can range from the relatively simple to the extremely complex. Residential DSL customers
have simpler hardware needs: a home computer, a DSL modem, an
Ethernet connection and maybe a microfilter or a Plain Old Telephone Service (POTS) splitter. Simply ordering a DSL service can get
all or most of these needs taken care of.
But for telcos, ISPs and campus networks, implementing a DSL
system is a bit more complicated, and most of it rests with the primary hardware that bundles the DSL lines for transport over a highspeed network—the Digital Subscriber Line Access Multiplexor, or
DSLAM.
The DSLAM’s form
Physically, the DSLAM’s design is fairly
simple. Most DSLAMs are large metal boxes
into which different modules, or blades, are
placed, depending on the type of DSL line.
DSLAM boxes are designed to take anywhere from 14 to 48 blades with port densities from 144 in an average-sized DSLAM to
579 in a large cabinet.
The tall, thin blades resemble large PC
cards and slide into the front of the DSLAM.
A blade typically handles anywhere from 1
to 24 DSL lines, and each blade handles a
specific DSL type. The DSLAM also has one
or more backhaul (or management) blades
to handle inbound and outbound DSL signals.
The DSLAM’s function
Early DSLAM boxes simply grouped the
different DSL lines and passed them on to
an ATM switch for backhaul services over
Ethernet, Fast Ethernet, E1/T1, E3/T3 or ATM
lines. They usually used ATM or PPP circuits
for customer connections. In terms of DSL
services, this is still the DSLAM’s basic function. But
with a rapidly growing DSL market and the
significant differences in type of service and
quality requirements, more advanced models (known as high-end or next-generation
DSLAMs) are being manufactured.
Some high-end DSLAMs incorporate
routing or IP addressing functions. Others
also use ATM switching fabrics, which enables them to take advantage of ATM’s
unique qualities: traffic shaping, prioritisation and Quality of Service (QoS). High-end
DSLAMs also typically have a high port density, often as high as 24
or more per blade. (Models with low port
densities [1 to 12 per blade] that have none
of these advanced functions are known as
low-end DSLAMs.) These more advanced
28
features mean providers can give their customers a wider range of DSL services and
more accurately address their needs.
Also, DSLAMs are now being made to
withstand harsher environmental conditions
so they can be installed away from the
telco—and closer to the customer—in a
curbside box or on a pole, thus shortening
the “last mile” and expanding the ability of
service providers to reach new customers.
How a DSLAM works
As DSL signals from users go to and from
the DSLAM, the frequencies below 4.0 KHz
(voice) are shaved off with a POTS splitter or
a microfilter (likely a low-pass filter) and
sent on to the Public Switched Telephone
Network (PSTN). The higher frequency (4
KHz to 2.2 MHz) DSL data is routed by a
high-pass filter
to the DSLAM. In order to manage these
DSL lines, which contain large amounts of
data,
the DSLAM multiplexes the data into a single, manageable signal. The DSLAM also demultiplexes these signals for transmission
to the DSL subscriber.
This information then crosses the
DSLAM’s backplane to the management
module, which pulls together the rest of the
DSL signals from other blades with a trunking function. From this module, the information is sent to an
ATM, Frame Relay or Layer 3 IP switch, or
some other unit that provides access to a
high-speed network. Or, in the case
of a high-end DSLAM, this switching function is handled in the DSLAM.
In either case, this stream of high-speed
information travels to the Central Office
(CO), typically over an ATM, E1, E3 or OC-3
line. Once the signals are sent over the network, they go through the CO’s routers and
to the Internet.
The multiplexing process
After the DSL lines enter the DSLAM
through their individual modules, each module performs a multiplexing function on the
DSL signals. Think of it this way: A DSLAM
has three separate DSL lines coming into
it—an ADSL line from a home user (A), an
HDSL line from
a small business (B), and an SDSL line from a
campus network (C). In order to move this
information efficiently, the DSLAM will take
a bit or a word from A, then from B, then
from C. The unit then repeats this function—A, B, C, A, B, C and so on, weaving the
separate signals into one stream of data to
be sent across the high-speed network.
For example, a channelised T1 or E1
blade will use time-division multiplexing to
multiplex data. TDM is a technique that uses
predetermined, time-slot interchanges to interweave bits or bytes of each signal one
after another. When the data is going from
the DSL blade to the customer site, the
demux (demultiplexing) function is either
done by
the module itself or by a TDM demux box.
DSLAM considerations
In order to get the most from your
DSLAM, it’s important to consider flexibility
and scalability when you design your system.
Designing a DSLAM requires an accurate
anticipation of your users’ needs, especially
if you’re operating a large-scale service
provider. You need to anticipate how many
business and residential customers you’ll
have and what kind of service they’ll need.
Additionally, you have to leave room for expansion of your service.
WAN
DSL Network Layout
Service
Provider
Nework
Central
Office
(CO)
Service
Provider
Network
Black Box Explains
Access Network
Target Data Network
Access Network:
ATM, Frame Relay or
Router-Based Overlay on
Top of the Inter-CO
Network
DSLAM
Some line encoding techniques
used by DSL.
Central
Office
(CO)
PC
DSL
Modem/Router
Hub
PC
Home
Modulation; used in modems for more
than 20 years.
CAP — Carrierless Amplitude and Phase
POTS Splitter
Transport System
Telephone
Switch
encoding is used on ISDN lines.
QAM — Quadrature Amplitude and Phase
High-Speed
Data POTS Splitter
(If Applicable)
To Inter-CO
Network
DSL (IDSL); sends two bits of data to every
one cycle of an analogue waveform. Uses
frequencies of up to 80,000 Hz; same
Office
Phone
2B1Q — 2 Binary 1 Quaternary; for ISDN
Main Distribution
Frame
DSL
Modem
/Router
modulation. Similar to QAM.
PC
DMT — Discrete MultiTone; patented by
AT&T Bell Labs more than 20 years ago.
To Homes
or Offices
DSL Service Distribution
IP Services
(Direct/Private)
IP Services:
Internet/Intranet
VPN
SDSL, IDSL or
G.SHDSL Line
RADSL or
ReachDSL™
ATM Multiservices
(Wholesale Direct)
IP Services:
Frame Relay, Voice
over DSL (VoDSL), ATM
Integrated Access
SDSL or
G.SHDSL Line
ADSL Line
Leased Line Services
(Wholesale Direct)
Nx64-kbps TDM
Services: Channelised/
Unchannelised
M/SDSL Line
G.SHDSL Line
DSLAM
Black Box Explains
Various DSL standards.
HDSL — High-bit-rate DSL; uses two pairs of copper wires; E1/T1 data
rates; distances up to 3657 metres over 24 AWG copper.
SDSL — Symmetric DSL; uses a single pair of copper wires; multiple data
rates of up to 2.3 Mbps; distances up to 3657 metres over
24 AWG copper.
G.SHDSL — G.991.2 (ITU) Symmetric High-bit-rate DSL; uses a single pair
G.Lite — G.991.2 (ITU) standard based on ADSL; uses one pair of copper
wires; data rates of 1.5 Mbps downstream, 512 kbps upstream; supports fast retrain; no need for splitter.
IDSL — ISDN DSL; uses one pair of copper wires; data rates up to
144 kbps; distances up to 7924 metres over 24 AWG copper.
ADSL — Asymmetric DSL; uses one pair of copper wires; data rates
of copper wires; data rates up to 2.3 Mbps; distances up to
of 1.5– 8 Mbps downstream and 64–640 kbps upstream; distances
4267 metres over 24 AWG copper.
over 24 AWG copper up to 5486 metres at 1.5 Mbps and 1828 metres
M/SDSL — Multirate SDSL; uses one pair of copper wires; changing data
rates of 2 Mbps; distances over 24 AWG copper up to
8839 metres at 64 or 128 kbps or 4572 metres at full 2 Mbps.
HDSL2 — High-bit-rate DSL2; uses one copper wire pair; E1/T1 data rates.
RADSL — Rate Adaptive DSL; symmetric or asymmetric; uses one pair
at 7 Mbps.
VDSL — Very high-speed DSL; uses a single copper wire loop; data rates
up to 52 Mbps downstream and 26 Mbps upstream; limited distance
(around 3280 metres).
ReachDSL™ — Symmetric/asymmetric; uses one pair of copper wires;
of copper wires; data rates from 1–7 Mbps downstream (to the user)
data rates up to 1 Mbps; distances up to approximately 9144 metres
and 128 kbps–1 Mbps; distances up to 5486 metres over 24 AWG
over 24 AWG copper. (Nonstandard.)
copper.
29
Why choose Black Box?
1
2
3
4
5
Over thirty years experience
The industry’s experts for more than three decades.
Expert Tech Support
Free 24/7/365 Tech Support by phone and on-line.
Multiple locations
Global coverage with a local focus.
Wide product range
More than 12,000 off-the-shelf products, plus custom products.
The Best warranties
Guarantees for complete satisfaction on products and services.
Special
Offer Price
£50
Was £84.00
G.703 Balun with built-in cables
Connecting G.703 networks is now easy.
w w w . b l a c k b o x . c o . u k
464 Basingstoke Road
Reading
Berkshire
RG2 0BG
Tech Support: 0118 965 6000
Sales: 0118 965 6150
Installation: 0118 965 6088
Email: [email protected]

WAN made easy - Conversion, Extension and Simulation from the

Transcription

Similar documents

Clearwave Communications, Delta

XL Tech, XL Internet

Cass Telephone Company, Cass Cable TV, Inc

SUN uk 01-09.qxp:SUN

High Fibre Adivce for children with constipation

Napoleon Container Terminal

Subcutaneous Port Catheter (Port, porta

January 17, 2011 - Village of Port Clements