hydraulic excavator

Transcription

hydraulic excavator
EX-6 series
Illustrations show diesel engine type.
A
B
C
D
D’
E
F
G
H
I
J
K
Distance between tumblers
Undercarriage length
Counterweight clearance
Rear-end swing radius
Rear-end length
Overall width of upperstructure
Overall height of cab
Min. ground clearance
Track gauge
Track shoe width
Undercarriage width
Track height
7 900 mm
10 500 mm
3 430 mm
8 280 mm
8 010 mm
10 670 mm
9 900 mm
1 250 mm
6 800 mm
1 850 mm
8 650 mm
3 100 mm
HYDRAULIC EXCAVATOR
EX8000-6 with Diesel Engine
Engine Gross Power : 2 x 1 450 kW (2 x 1 940 HP)
Operating Weight : Loading Shovel : 825 000 kg
Backhoe: 837 000 kg
Backhoe: 820 000 kg
EX8000E-6 with Electric Motor
Power Output : 2 x 1 200 kW
Operating Weight : Loading Shovel : 808 000 kg
Bucket Capacity
Loading Shovel Bucket : Heaped : 40.0 m3
Backhoe Bucket : SAE, PCSA Heaped : 43.0 m3 CECE Heaped : 38.0 m3
SPECIFICATIONS
EX8000-6
ENGINE
Model ����������������������������������� Cummins QSKTA60-CE
Type ������������������������������������� Water-cooled, 4-cycle,16-cylinder,
turbo-charged and after-cooled, direct
injection chamber-type diesel engine
Rated power
SAE J1995, gross ������������� 2 x 1 450 kW (2 x 1 940 HP)
at 1 800 min-¹ (rpm)
Net ������������������������������������ 2 x 1 450 kW (2 x 1 940 HP)
at 1 800 min-¹ (rpm)
Maximum torque ������������������ 2 x 8 364 N·m (2 x 853 kgf·m)
at 1 500 min-¹ (rpm)
Piston displacement ������������� 2 x 60 L
Bore and stroke ������������������� 159 mm X 190 mm
Starting system �������������������� 24 V electric motor
Batteries ������������������������������� 8 x 12 V , 8 x 220 AH
Cold starting ������������������������� Ether aided
HYDRAULIC SYSTEM
Hitachi's ETS (Electronic Total control System) can achieve maximum
job efficiency by reducing fuel consumption and noise levels, while
maximizing productivity through the optimization of engine-pump
functions with excellent controllability increasing operator comfort.
• E-P Control (Computer-aided Engine-Pump Control system)
Main pumps regulated by electric engine-speed sensing control
system.
• I-OHS (Integrated Optimum Hydraulic System)
LD:16 main pumps and 6 control valves and 2 set of flow-assisting
valves enable both independent and combined operations of all
functions.
BH:16 main pumps and 8 control valves.
• FPS (Fuel-saving Pump System)
FPS minimizes energy loss with superior performance in fine control.
• Auto-Idling system for saving fuel and reducing noise.
• Hydraulic drive cooling-fan system for oil cooler.
• Hydraulic drive cooling-fan system for radiator.
• Forced-lubrication and forced-cooling pump drive system.
Cylinder Dimensions
Loading shovel
Quan.
2
2
2
2
Boom
Arm
Bucket
Dump
Bore
480 mm
390 mm
390 mm
310 mm
Quan.
2
2
2
Bore
480 mm
420 mm
360 mm
Rod diameter
340 mm
300 mm
260 mm
Revolving Frame
A deep, full-reinforced box section. Heavy-gauge steel plates used for
ruggedness.
Deck Machinery
Maintenance accessibility is the major feature in the layout of deck
machinery. Folding stairs provide easy access to the deck machinery.
And also the side walk provides easy access to engines, hydraulic and
electrical components.
Hydraulic Filters
16
All hydraulic circuits have high-quality hydraulic filters for protection
against oil contamination and longer life of hydraulic components.
Full flow filter
High pressure strainer
(In main & swing pump delivery line)
Drain filter
(For all plunger type pumps & motors)
By-pass filter
(In oil cooler by-pass line)
Pilot filter
Qty.
10
16
10 µm
80 meshes
1
10 µm
1
5 µm
2
10 µm
12
17
17
16
22
6 high-torque, axial-piston motors with two-stage planetary gear
bathed in oil. Swing circle with dirt seals is a heavy-duty, triple-row,
cylindrical roller bearing. Induction-hardened internal swing circle
gear and pinion immersed in lubricant. Parking brake of springset/hydraulic-released disc type. This parking brake in manually
releasable.
Swing speed ���������������������������������������������������������������� 3.2 min-¹ (rpm)
Operator's Cab
The sturdy cab, with the top guard conforming to OPG Level (ISO),
helps protect the operator from falling objects.
1 800 mm width, 3 360 mm length, 2 150 mm height, roomy cab with
tinted-glass windows features all-round visibility.
Multi-Display (color LCD 10.5 inch) for centralized information of
machine status. Color monitor cameras for rear, right side, left lower
views.
Pressurized 3 air conditioning system.
Noise level ............................................... 75 dB(A) in the cab; on max.
engine speed under no-load
condition.
Eye level height .................................................................... 9 000 mm
16
15
17
17
16
22
UNDERCARRIAGE
Tracks
CONTROLS
2 Implement Levers
Electric joystick control levers. Right lever is for boom and bucket
control, left lever for swing and arm control.
2 pedals provided for opening/closing the bottom dump bucket.
2 Travel Levers with Pedals
9
13
13
13
13
13 8
13
8
9
25
14
11
4
12
3
2
Implement circuit ������������������������������������������� 29.4 MPa (300 kgf/cm²)
Swing circuit �������������������������������������������������� 29.4 MPa (300 kgf/cm²)
Travel circuit��������������������������������������������������� 29.4 MPa (300 kgf/cm²)
Pilot circuit ���������������������������������������������������� 4.4 MPa ( 45 kgf/cm²)
15
6
19 2 3
7
8
16
9
Hydraulic Cylinders
13
1
Left Console
10
Bucket Close Pedal (For Loading Shovel)
2
Left Control Lever/Horn Switch
11
Bucket Open Pedal (For Loading Shovel)
3
Left Travel Pedal
12
Pilot Control Shut-Off Lever
4
Left Travel Lever
13
Rear Console
5
Right Travel Lever
14
Emergency Engine Stop Switch
6
Right Travel Pedal
15
Engine Speed Control Dial
7
Right Control Lever/Horn Switch
16
Key Switch
8
Right Console
17
Monitor Display
9
Operator’s Seat
1
Engine × 2
2
3
Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame
and X-form center frame assures durability. Heavy-duty track frame
of all-welded, stress-relieved structure. Top-grade materials used for
toughness. Lifetime-lubricated induction-hardened track rollers, idlers
and drive tumblers with floating seals. Specially heat-treated connection
pins. Hydraulic track adjuster provided with N2 gas accumulator with
relief valve. Track adjuster provided with protection device against
abnormal tension. Travel motion alarm device.
Shovel-type Undercarriage
Triple grouser shoes specially heat treated cast steel.
Shoe width ............................................................................ 1 850 mm
Numbers of Rollers and Shoes (Each Side)
21
19 2 3
19 2 3
20
7
1
High-strength piston rods and tubes adopted. Cylinder cushion
mechanisms are provided for boom, arm, bucket and dump cylinders.
Stroke-end control system is provided for arm, bucket cylinders.
Bucket cylinders are provided with protector.
18
6
1
5
9
14
Relief Valve Settings
19 2 3
8
17
Max.oil flow �������������� 16 × 500 L/min
Pilot pump ���������������� 2 gear pump
Max.oil flow��������������� 2 × 110 L/min
1
25
9
5
10
21
5
4
11
11
11
Remote-controlled hydraulic servo system. Independent drive at each
track allows counter rotation of tracks.
4
23 24
10
23
10
10
Main pumps �������������� 16 variable-displacement, axial piston pumps
for front attachment, travel and swing
Rod diameter
340 mm
270 mm
270 mm
180 mm
Backhoe
Boom
Arm
Bucket
Swing Device
UPPERSTRUCTURE
14
Center Joint
Engine Radiator × 4
15
Cab
LTA Radiator × 4
16
Air Filter × 4
4
Hydraulic Pump × 16
17
Muffler × 4
5
Engine-Pump Bulkhead × 2
18
Folding Stairs
6
Hydraulic Oil Tank
19
Fan Motor x 8
7
Fuel Tank
20
Battery Unit
8
Control Valve × 6
21
Reserve tank (engine oil) x 2
9
High-Pressure Strainer × 16
22
Reserve tank (coolant) x 2
10
Hydraulic Oil Cooler × 6
23
Pump mission oil cooler x 2
11
Hydraulic Oil Cooling Fan Motor × 3
24
Fuel cooler x 2
12
Lubricator
25
Engine room Cooling Fan x 2
13
Swing Device × 6
Upper rollers ....................................................................................... 3
Lower rollers ....................................................................................... 7
Track shoes ...................................................................................... 39
Travel Device
Each track driven by high-torque, axial piston motors, allowing counter
rotation of tracks. 2-stage planetary gear plus spur gears reduction
device. Dual-support-type traction device. Parking brake of springset/hydraulic-released disc type. This parking brake can be manually
releasable.
Travel speeds ....................................................... High : 0 to 2.0 km/h
Low : 0 to 1.4 km/h
Maximum traction force ................................... 3 000 kN (306 000 kgf)
Gradeability ...................................................... 58 % (30 degree) max.
SERVICE REFILL CAPACITIES
Fuel tank
Engine coolant
Engine oil pan
Reserve tank
Pump transmission device
Swing device
Hydraulic system
Hydraulic oil tank
Travel device
Engine oil
litters
14 900
2 x 614
2 x 260
2 x 280
2 x 62
6 x 75
9 700
3 890
2 x 490
SPECIFICATIONS
EX8000-6
WEIGHTS AND GROUND PRESSURE
WEIGHTS AND GROUND PRESSURE
Loading Shovel
Backhoe
Equipped with 40.0 m3 (heaped) bucket.
Shoe type
Triple grousers
Equipped with 11.5 m boom, 5.8 m arm, and 43.0 m3 (SAE, PCSA heaped) bucket.
Shoe width
1 850 mm
Operating weight
825 000 kg
Ground pressure
248 kPa (2.53 kgf/cm2)
LOADING SHOVEL ATTACHMENTS
Shoe width
1 850 mm
Operating weight
837 000 kg
Ground pressure
252 kPa (2.57 kgf/cm2)
BACKHOE ATTACHMENTS
Boom and arm are of all-welded, low-stress, full-box section design.
Bucket of all-welded, high-strength steel structure. Bucket/arm and arm/
boom joint pins are floating type.
Boom and arm are of all-welded, low-stress, high-tensile strength steel full-box section design.
Bucket
Capacity (heaped)
40.0 m3
Shoe type
Triple grousers
Width
5 600 mm
No.of teeth
6
Weight
62 500 kg
Type
Bottom dump type general purpose
WORKING RANGES
Replaceable thrust plates are provided with bucket/arm joint part.
Autolubrication system for all pins is standard.
Bucket
Capacity
SAE, PCSA
CECE
heaped
heaped
43.0 m3
38.0 m3
Width
With
side cutters
4 850 mm
Without
side cutters
-
No.of
teeth
Weight
Type
Materials
density
6
44 200 kg
General purpose
1 800 kg/m³ or less
Meter
WORKING RANGES
20
Meter
18
20
16
18
14
16
G
H
14
12
10
12
E
8
10
8
E'
6
6
EH5000
4
4
A
F
4
C
6
Ground Line
D'
B
20
18
16
14
12
10
4
8
D
10
8
6
4
2
0 Meter
A
Min. digging distance
B
Min. level crowding distance
C
Level crowding distance
D
Max. digging reach
E
Max. cutting height
E’
Max. dumping height
F
Max. digging depth
G
Working radius at max. dumping height
H
Max. bucket opening width
Crowding force
Breakout force
7 200
11 100
5 600
18 500
20 500
13 800
4 100
10 900
2 800
2 870 kN (293 000 kgf)
2 230 kN (227 000 kgf)
F
2
6
Unit: mm
D
0
0
7
C
2
2
2
E
EH5000
G
Ground Line
A'
A
B B'
2.5 m
26 24 22 20 18 16 14 12 10
8
6
4
2
0
Meter
Unit: mm
BE-Boom length
BE-Arm length
A Max. digging reach
A'Max. digging reach (on ground)
B Max. digging depth
B'Max. digging depth (2.5 m level)
C Max. cutting height
D Max. dumping height
D'Min. dumping height
E Min. swing radius
F Max. vertical wall
G Min. level crowding distance
Bucket digging force
ISO
SAE, PCSA
Arm crowd force
ISO
SAE, PCSA
11.5 m
5.8 m
22 300
21 400
8 400
8 300
19 000
11 900
5 000
12 200
3 300
8 600
2 020 kN (206 000 kgf)
1 900 kN (193 400 kgf)
1 770 kN (180 700 kgf)
1 750 kN (178 300 kgf)
EQUIPMENT
STANDARD EQUIPMENT
ENGINE
• 140 A alternator
• Heavy-duty type air cleaner with dust
ejector
• Cartridge-type engine oil filter
• Cartridge-type engine oil bypass filter
• Cartridge-type fuel filter
• Water filter
• Fan guard
• lsolation-mounted engine
• Pre-lubrication system
• Auto-idle system
• Emergency engine stop system
• Hydraulic drive cooling-fan system
• Engine oil reserve system
• Engine room cooling fan
HYDRAULIC SYSTEM
• E-P control system
• I-OHS(lntegrated Optimum Hydraulic
System)
• FPS(Fuel-saving Pump System)
• Hydraulic drive cooling-fan system
• Forced-lubrication and forced cooling
pump drive system
• Control valve with main relief valve
• Suction filter
• Full-flow filter
• Bypass filter
• Pilot filter
• Drain filter
• High-pressure strainer
CAB
• OPG top guard level II (ISO)
• AII-weather sound-suppressed steel
integrated cab
• Fluid-filled elastic mounts
• Laminated glass windshield
• Reinforced/tinted(green color)glass side
windows
• Parallel-link-type intermittent windshield
wiper
• Front windshield washer
• Main-display with various meters, pilot
indicators, and warning indicators
• Air suspension seat with automatic
weight adjusting function
• Wrist control type electric lever with
hight adjusting function
• Electric travel pedals
• Electric bucket open/close pedals
• LED type room lamps
• Footrest
• Air horn with electric compressor
• Auto-tuning AM-FM radio with digital
clock
• Seat belt
• Hot&cool-box
• Utility space 1 100 mm × 1 800 mm
• Floor mat
• Air conditioner with defroster
• Rearview mirror
OPTIONAL EQUIPMENT
• Upper slider
• Travel motor guard
• Travel device guard
• 12 high brightness working lights
• Cold weather package*
• Highland application*
*engineered on request
Standard equipment may vary by country, so please consult your Hitachi dealer for details.
• Evacuation hammer
• Emergency escape device
• Trainer's seat
• Pilot control shut-off lever
MONITOR SYSTEM
Meters, pilot indicators, and warning
indicators are displayed on the main
display
• Meters:
Clock
Coolant temperature gauge
Tachometer
Engine oil pressure gauge
Engine oil temperature gauge
Hour meter
Fuel gauge
Battery voltage gauge
Hydraulic oil temperature gage
Ambient temperature
• Pilot indicator (Green):
Coolant level check
Engine oil level (oil pan) check
Engine oil level (reserve tank) check
Hydraulic oil level check
Prelub
Auto-lubrication
Auto-idle
Travel mode
• Warning indicator (Red):
Alternator
Pump transmission oil level
Engine stop
Engine oil pressure
Coolant overheat
Coolant level
Engine over run
Fuel temperature
Exhaust temperature
Hydraulic oil level
Auto-lubrication
Stop valve
Electric lever
Emergency engine stop
Tension
• Warning indicator (Amber)
Fast-filling
• Warning indicator (Yellow):
Engine oil pressure
Coolant overheat
Coolant level
Fuel temperature
Engine warning
Exhaust temperature
Air cleaner restriction
Stairway position
Hydraulic oil overheat
Pump contamination
Electrical equipment box
MEMO
• Alarm buzzers
Pump transmission oil level (R).(L)
Hydraulic oil level
Stop valve
Electric lever
Fast-filling
Stairway position
DATA LOGGING SYSTEM
• DLU (Data-logging unit) continuously
records performance of engine and
hydraulic system
The record can be down-loaded dy PC
and PDA
LIGHTS
• 12 working lights
4 entrance lights
12 maintenance lights
UPPERSTRUCTURE
• Lockable machine covers
• 80 000 kg counterweight
• Hydraulic drive grease gun with hosereel
• Swing parking brake
• Electric oil pump to draw hydraulic oil
from suction and return pipe lines
• Folding stairs for going up and down
UNDERCARRIAGE
• Travel parking brake
• Travel motion alarm device
• Hydraulic track adjuster with N2gas
accumulator and relief valve
• 1 850 mm triple grouser shoes
• Single-frange rollers
MISCELLANEOUS
• Stairs and handrails (Meeting lSO)
• Recirculation air filter for air conditioner
• Ventilation air ailter for air conditioner
• 12 V power terminal board
• Stop valve for transport and reassembly
• Auto-lubrication system (Lincoln) for
front-attachment pins, swing bearing
and center joint
• Hydraulic oil suction pump
FAST−FILLING SYSTEM
• Fast-filling system (Wiggins) for fuel,
hydraulic oil, coolant, swing device
oil, pump mission oill, engine oil, and
grease (couplers not included)
Optional equipment may vary by country, so please consult your Hitachi dealer for details.
• Fast-filling couplers
• Satellite data transmitting system
• Additional air horn (Right side)
• 4 color monitor cameras; 2 front and 2 rear
• Standard tool kit
SPECIFICATIONS
EX8000E-6
ELECTRIC MOTOR
High Voltage, Three Phase, Squirrel Cage Induction Motor, Totally
Enclosed Air-to-Air-Cooled (TEAAC).
Type ����������������������������������������������������� HITACHI TFOA-KK
Rating
Rated continuous output ���������������������� 1 200 kW x 2
Voltage ������������������������������������������������� AC 6 000 - 6 600 V / 50 Hz
AC 6 600 - 6 900 V / 60 Hz
Number of poles ���������������������������������� 4
Synchronous RPM ������������������������������� 1 500 min-1 / 50 Hz
1 800 min-1 / 60 Hz
Rated current ��������������������������������������� 124 A x 2 @6 600 V
Insulation class ������������������������������������� F class B raise
Space heater included.
Thermo-guard (temperature detector)
Starting condition ��������������������������������� Reactor 50 % tap
HYDRAULIC SYSTEM
• I-OHS (Integrated Optimum Hydraulic System)
LD:16 main pumps and 6 control valves and 2 set of flow-assisting
valves enable both independent and combined operations of all
functions.
BH:16 main pumps and 8 control valves.
• Hydraulic drive cooling-fan system for oil cooler.
• Hydraulic drive cooling-fan system for radiator.
• Forced-lubrication and forced-cooling pump drive system.
Main pumps �������������� 16 variable-displacement, axial piston pumps
for front attachment, travel and swing
Max.oil flow �������������� 16 × 500 L/min
Pilot pump ���������������� 2 gear pump
Max.oil flow��������������� 2 × 110 L/min
Relief Valve Settings
Implement circuit ������������������������������������������� 29.4 MPa (300 kgf/cm²)
Swing circuit �������������������������������������������������� 29.4 MPa (300 kgf/cm²)
Travel circuit��������������������������������������������������� 29.4 MPa (300 kgf/cm²)
Pilot circuit ���������������������������������������������������� 4.4 MPa ( 45 kgf/cm²)
Cylinder Dimensions
Loading shovel
Quan.
2
2
2
2
Boom
Arm
Bucket
Dump
Bore
480 mm
390 mm
390 mm
310 mm
Rod diameter
340 mm
270 mm
270 mm
180 mm
Backhoe
Quan.
2
2
2
Boom
Arm
Bucket
Bore
480 mm
420 mm
360 mm
Rod diameter
340 mm
300 mm
260 mm
Revolving Frame
A deep, full-reinforced box section. Heavy-gauge steel plates used for
ruggedness.
Deck Machinery
Maintenance accessibility is the major feature in the layout of deck machinery.
Folding stairs provide easy access to the deck machinery. And also the side
walk provides easy access to motors, hydraulic and electrical components.
Hydraulic Filters
All hydraulic circuits have high-quality hydraulic filters for protection
against oil contamination and longer life of hydraulic components.
Full flow filter
High pressure strainer
(In main & swing pump delivery line)
Drain filter
(For all plunger type pumps & motors)
By-pass filter
(In oil cooler by-pass line)
Pilot filter
Qty.
10
16
10 µm
80 meshes
1
10 µm
1
5 µm
2
10 µm
The sturdy cab, with the top guard conforming to OPG Level (ISO),
helps protect the operator from falling objects.
1 800 mm width, 3 360 mm length, 2 150 mm height, roomy cab with
tinted-glass windows features all-round visibility.
Multi-Display (color LCD 10.5 inch) for centralized information of machine
status. Color monitor cameras for rear, right side, left lower views.
Pressurized 3 air conditioning system.
Tracks
Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame
and X-form center frame assures durability. Heavy-duty track frame
of all-welded, stress-relieved structure. Top-grade materials used for
toughness. Lifetime-lubricated induction-hardened track rollers, idlers
and drive tumblers with floating seals. Specially heat-treated connection
pins. Hydraulic track adjuster provided with N2 gas accumulator with
relief valve. Track adjuster provided with protection device against
abnormal tension. Travel motion alarm device.
19
Shovel-type Undercarriage
Electric joystick control levers. Right lever is for boom and bucket
control, left lever for swing and arm control.
2 pedals provided for opening/closing the bottom dump bucket.
Triple grouser shoes specially heat treated cast steel.
Shoe width ............................................................................ 1 850 mm
8
6
8
6
17
6
5
5
4
3
5
Remote-controlled hydraulic servo system. Independent drive at each
track allows counter rotation of tracks.
4
14
14
14
17
Upper rollers ....................................................................................... 3
Lower rollers ....................................................................................... 7
Track shoes ...................................................................................... 39
10
12
11
9
11
4
16
Numbers of Rollers and Shoes (Each Side)
1
14
14
14
13
15
16
5
2
9
17
2 Travel Levers with Pedals
High-strength piston rods and tubes adopted. Cylinder cushion
mechanisms are provided for boom, arm, bucket and dump cylinders.
Stroke-end control system is provided for arm, bucket cylinders.
Bucket cylinder is provided with protector.
Operator's Cab
UNDERCARRIAGE
2 Implement Levers
Hydraulic Cylinders
6 high-torque, axial-piston motors with two-stage planetary gear
bathed in oil. Swing circle with dirt seals is a heavy-duty, triple-row,
cylindrical roller bearing. Induction-hardened internal swing circle gear
and pinion immersed in lubricant. Parking brake of spring-set/hydraulicreleased disc type. This parking brake in manually releasable.
Swing speed ���������������������������������������������������������������� 2.9 min-¹ (rpm)
Eye level height .................................................................... 9 000 mm
7
CONTROLS
10
3
2
1
10 21
17
12
14
3
20
18
Travel Device
Each track driven by high-torque, axial piston motors, allowing counter
rotation of tracks. 2-stage planetary gear plus spur gears reduction
device. Dual-support-type traction device. Parking brake of springset/hydraulic-released disc type. This parking brake can be manually
releasable.
Travel speeds ....................................................... High : 0 to 1.9 km/h
Low : 0 to 1.3 km/h
Maximum traction force ................................... 3 000 kN (306 000 kgf)
Gradeability ...................................................... 58 % (30 degree) max.
6
2
7
1
SERVICE REFILL CAPACITIES
8
15
9
13
Swing Device
UPPERSTRUCTURE
1
Main Motor x 2
12
Cubicle
2
3
Coupler x 2
13
Control Valve x 6
Pump Drive Unit x 2
14
Swing Device x 6
4
5
Hydraulic Pump x 16
15
Slip Ring
Hydraulic Oil Cooling Fan Motor x 3
16
Center Joint
6
Hydraulic Oil Cooler x 2 x 3
17
High-Pressure Strainer x 16
7
Lubricator
18
Battery x 2
8
Pump Transmission Oil Cooler x 2
19
Cab
9
Motor-Pump Bulkhead x 2
20
Folding Stairs
21
Cab Heater Unit
1
Left Console
10
Bucket Close Pedal (For Loading Shovel)
10
Bulkhead x 2
2
Left Control Lever/Horn Switch
11
Bucket Open Pedal (For Loading Shovel)
11
Hydraulic Oil Tank
3
Left Travel Pedal
12
Pilot Control Shut-Off Lever
4
Left Travel Lever
13
Rear Console
5
Right Travel Lever
14
Emergency Motor Stop Switch
6
Right Travel Pedal
15
Key Switch
7
Right Control Lever/Horn Switch
16
Monitor Display
8
Right Console
9
Operator’s Seat
Pump transmission device
Swing device
Hydraulic system
Hydraulic oil tank
Travel device
litters
2 x 62
6 x 75
9 700
3 890
2 x 490
SPECIFICATIONS
EX8000E-6
WEIGHTS AND GROUND PRESSURE
WEIGHTS AND GROUND PRESSURE
Loading Shovel
Backhoe
Equipped with 40.0 m3 (heaped) bucket.
Shoe type
Triple grousers
Equipped with 11.5 m boom, 5.8 m arm, and 43.0 m3 (SAE, PCSA heaped) bucket.
Shoe width
1 850 mm
Operating weight
808 000 kg
Ground pressure
243 kPa (2.48 kgf/cm2)
LOADING SHOVEL ATTACHMENTS
Width
5 600 mm
No.of teeth
6
Weight
62 500 kg
Type
Bottom dump type general purpose
Meter
Meter
18
20
Width
With
side cutters
4 850 mm
Without
side cutters
-
No.of
teeth
Weight
Type
Materials
density
6
44 200 kg
General purpose
1 800 kg/m³ or less
E
18
16
14
16
G
H
14
12
12
10 E
10
8
E'
6
Replaceable thrust plates are provided with bucket/arm joint part.
Autolubrication system for all pins is standard.
WORKING RANGES
20
8
Ground pressure
247 kPa (2.52 kgf/cm2)
Bucket
Capacity
SAE, PCSA
CECE
heaped
heaped
43.0 m3
38.0 m3
WORKING RANGES
6
EH5000
4
4
C
D
D'
2
2
0
0
A
2 F
4
C
6
Ground Line
B
20
18
16
14
12
10
4
8
D
10
8
6
4
2
0 Meter
A
Min. digging distance
B
Min. level crowding distance
C
Level crowding distance
D
Max. digging reach
E
Max. cutting height
E’
Max. dumping height
F
Max. digging depth
G
Working radius at max. dumping height
H
Max. bucket opening width
Crowding force
Breakout force
7 200
11 100
5 600
18 500
20 500
13 800
4 100
10 900
2 800
2 870 kN (293 000 kgf)
2 230 kN (227 000 kgf)
F
2
6
Unit: mm
10
Operating weight
820 000 kg
Boom and arm are of all-welded, low-stress, full-box section design.
Bucket of all-welded, high-strength steel structure. Bucket/arm and arm/
boom joint pins are floating type.
Bucket
7
Shoe width
1 850 mm
BACKHOE ATTACHMENTS
Boom and arm are of all-welded, low-stress, high-tensile strength steel full-box section design.
Capacity (heaped)
40.0 m3
Shoe type
Triple grousers
EH5000
G
Ground Line
A'
A
B B'
2.5 m
26 24 22 20 18 16 14 12 10
8
6
4
2
0
Meter
Unit: mm
BE-Boom length
BE-Arm length
A Max. digging reach
A'Max. digging reach (on ground)
B Max. digging depth
B'Max. digging depth (2.5 m level)
C Max. cutting height
D Max. dumping height
D'Min. dumping height
E Min. swing radius
F Max. vertical wall
G Min. level crowding distance
Bucket digging force
ISO
SAE, PCSA
Arm crowd force
ISO
SAE, PCSA
11.5 m
5.8 m
22 300
21 400
8 400
8 300
19 000
11 900
5 000
12 200
3 300
8 600
2 020 kN (206 000 kgf)
1 900 kN (193 400 kgf)
1 770 kN (180 700 kgf)
1 750 kN (178 300 kgf)
11
EQUIPMENT
STANDARD EQUIPMENT
Standard equipment may vary by country, so please consult your Hitachi dealer for details.
ELECTRIC MOTOR
• Pilot indicator (Green):
Main motor run (R).(L)
Travel mode
HYDRAULIC SYSTEM
• Warning indicator: (Red):
Pump transmission oil level (R).(L)
AC6600V power source
Cubicle box
Hydraulic oil level
Auto-lubrication
Stop valve
3E Relay (R).(L)
Main motor overheat (R).(L)
Main motor start congestion (R).(L)
AC210V power source
Battery charge
Electric lever
Emergency motor stop
Tension
Cable drum
• Space heater included
• Thermo-guard (temperature detector)
• I-OHS(lntegrated Optimum Hydraulic
System)
• Hydraulic drive cooling-fan system
• Forced-lubrication and forced cooling
pump drive system
• Control valve with main relief valve
• Suction filter
• Full-flow filter
• Bypass filter
• Pilot filter
• Drain filter
• High-pressure strainer
CAB
• OPG top guard level II (ISO)
• AII-weather sound-suppressed steel
integrated cab
• Fluid-filled elastic mounts
• Laminated glass windshield
• Reinforced/tinted(green color)glass side
windows
• Parallel-link-type intermittent windshield
wiper
• Front windshield washer
• Main-display with various meters, pilot
indicators, and warning indicators
• Air suspension seat with automatic
weight adjusting function
• Wrist control type electric lever with
hight adjusting function
• Electric travel pedals
• Electric bucket open/close pedals
• LED type room lamps
• Footrest
• Air horn with electric compressor
• Auto-tuning AM-FM radio with digital
clock
• Seat belt
• Hot&cool-box
• Utility space 1 100 mm × 1 800 mm
• Floor mat
• Air conditioner with defroster
• Rearview mirror
• Evacuation hammer
• Emergency escape device
• Trainer's seat
• Pilot control shut-off lever
MONITOR SYSTEM
• Meters:
Hour meter
Main motor coil temperature gauge (R).(L)
Main motor ammeter (R).(L)
Main motor voltmeter (R).(L)
Clock
Battery voltage gauge
Hydraulic oil temperature gauge
Ambient temperature
OPTIONAL EQUIPMENT
• Upper slider
• Travel device guard
• 12 high brightness working lights
• Cold weather package*
*engineered on request
12
• Warning indicator: (Yellow):
Electrical equipment box
Stairway position
Hydraulic oil overheat
Pump contamination
Cab.heator
• Warning indicator: (Amber):
Fast-filling
• Alarm buzzers:
AC6600V power source
Cubicle box
Hydraulic oil level
Stop valve
Stairway position
Pump transmission oil level (R)·(L)
3E Relay (R)·(L)
Main motor overheat (R)·(L)
Main motor start congestion (R)·(L)
AC210V power source
Electric lever
Cable drum
Fast-filling
MEMO
UPPERSTRUCTURE
• Lockable machine covers
• 80 000 kg counterweight
• Hydraulic drive grease gun with hosereel
• Swing parking brake
• Electric oil pump to draw hydraulic oil
from suction and return pipe lines
• Folding stairs for going up and down
UNDERCARRIAGE
• Travel parking brake
• Travel motion alarm device
• Hydraulic track adjuster with N2gas
accumulator and relief valve
• 1 850 mm triple grouser shoes
• Single-frange rollers
MISCELLANEOUS
• Stairs and handrails (Meeting lSO)
• Recirculation air filter for air conditioner
• Ventilation air ailter for air conditioner
• 12 V power terminal board
• Stop valve for transport and reassembly
• Auto-lubrication system (Lincoln) for
front-attachment pins, swing bearing
and center joint
• Hydraulic oil suction pump
FAST−FILLING SYSTEM
• Fast-filling system (Wiggins) for fuel,
hydraulic oil, swing device oil, pump
mission oill, and grease (couplers not
included)
DATA LOGGING SYSTEM
• DLU (Data-logging unit) continuously
records performance of the hydraulic
system
The record can be down-loaded dy PC
and PDA
LIGHTS
• 12 working lights
4 entrance lights
12 maintenance lights
Optional equipment may vary by country, so please consult your Hitachi dealer for details.
• Fast-filling couplers
• Satellite data transmitting system
• Additional air horn (Right side)
• 4 color monitor cameras; 2 front and 2 rear
• Standard tool kit
13
TRANSPORTATION
Illustrations show diesel engine type.
• Easily assembled owing to local assembling system requiring no welding.
UPPERSTRUCTURE
Unit: mm
Water tank
Weight : 120 kg
Batterybox
Weight : 1 280 kg
717
662
2 440
3 410
3 220
Engine unit (left)
Weight : 36 600 kg
2 350
Intake, exhaust device
Weight : 1 630kg
3 640
Cab assembly
Weight : 3 690 kg
2 750
9 720
3 930
Width : 1 820
Width : 913
Width : 2 580
Main frame assembly
Weight : 56 000 kg
Valve assembly
Weight : 5 380 kg
Width : 2 810
Width : 1 480
Oil tank assembly
Weight : 9 920 kg
Swing device
Weight : 1 660 kg x 6
Fuel tank assembly
Weight : 5 620 kg
2 730
11 220
3 010
Engine unit (right)
Weight : 42 700 kg
Width : 400
Counter weight (right)
Weight : 29 500 kg
Width : 610
2 750
Width : 610
717
Width : 913
Counter weight (left)
Weight : 29 500 kg
1 670
1 690
2 750
Water tank
Weight : 120 kg
Width : 1 150
Width : 2 560
Weight (left)
Weight : 9 950 kg
1 690
1 120
2 100
Weight (right)
Weight : 9 950 kg
Grease tank
Weight : 1 200 kg
1 330
3 220
Width : 2 800
Width : 2 180
1 440
2 440
445
Width : 495
14
Mufflers and air cleaners assembly
Weight : 1 610 kg
10 360
495
Return piping assembly
Weight : 172 kg
Width : 1 410
Width : 1 300
662
Width : 3 160
3 640
Hydraulic-oil suction device
Weight : 42 kg
910
1 670
Width : 4 000
4 070
3 470
2 130
2 080
400
3 580
2 810
5 900
Width : 1 530
Other parts
Content
Q’ty
Length mm
Width mm
Height mm
Net Weight kg
Cover
1
1 790
485
970
59
Fender 1
1
3 015
1 480
1 950
695
Fender 2
1
1 730
689
2 440
190
Fender 3
1
1 370
478
1 950
145
Fender 4
1
2 000
675
1 950
301
Fender 5
1
2 470
675
1 950
226
Fender 6
1
2 200
682
1 950
233
Fender 7
1
2 510
675
2 440
248
Fender 8
1
2 580
677
1 950
290
Handrail 1
1
2 030
420
1 430
28
Handrail 2
1
2 540
573
1 010
71
Handrail 3
1
2 630
247
1 310
31
Handrail 4
1
1 430
354
2 030
29
Handrail 5
1
1 340
684
992
24
Handrail 6
1
2 540
370
1 010
71
Handrail 7
1
2 180
83
1 010
28
Handrail 8
2
2 660
266
1 010
35/@
Handrail 9
1
2 480
223
1 010
30
Handrail 10
2
2 240
283
1 010
19/@
Handrail 11
2
2 960
467
1 310
27/@
Step 1
1
392
837
1 560
30
Step 2
1
2 240
700
1 310
110
Step 3
1
1 450
711
1 600
87
Step 4
1
1 120
734
1 270
73
Step 5
1
3 100
585
1 260
193
Step 6
1
1 130
700
2 090
124
Step 7
1
2 340
700
3 310
223
Step 8
1
3 180
596
1 260
186
Step 9
1
1 440
859
1 300
142
Step 10
1
1 610
1 230
1 330
118
Step 11
1
1 490
1 020
1 330
101
Step 12
1
1 320
1 410
1 310
184
Step 13
1
1 660
672
1 310
120
Step 14
1
635
1 030
1 310
76
Step 15
1
990
736
1 350
86
Step 16
1
394
652
1 590
61
Step 17
1
1 120
734
1 300
73
Step 18
1
1 490
700
1 600
87
Step 19
1
2 510
772
1 310
127
Step assenbly 1
1
3 370
225
1 500
294
Step assenbly 2
1
3 370
125
683
191
Ladderbox
1
1 650
1 750
1 900
812
Ladder 1
1
3 590
1 100
2 140
897
Ladder 2
1
717
265
1 790
26
5 900
Width : 1 520
15
TRANSPORTATION
UNDERCARRIAGE
LOADER ATTACHMENTS
Unit: mm
Track side frames
Weight : 63 600 kg x 2
Track links
Weight :
A set : 5 860 kg x 18
Weight :
B set : 4 390 kg x 2
Boom assembly
Weight : 57 200 kg
Arm assembly
Weight : 31 100 kg
Boom cylinders
Weight : 9 720 kg x 2
Swing circle
Weight : 22 000 kg
4 000
Width : 252
835
2 830
Width : 760
Front bucket assembly with shrouds
Weight : 26 000 kg
5 320
Width : 725
Teeth
Weight : 352 kg x 6
758
4 280
3 650
3 760
Width : 7 210
Width : 1 970
Rear bucket assembly
Weight : 32 800 kg
703
0
67
3 630
276
4
Width : 3 650
Bucket cylinders
Weight : 5 530 kg x 2
484
1 660
Width : 4 670
Width : 1 070
Other parts
Content
3 490
Width : 3 258
Width : 440
Valve brakes
Weight : 60 kg x 4
2 390
1 660
Track frame assembly
Weight : 60 000 kg
9 800
383
Width : 1 862
4 920
6 260
3 510
1 850
Travel devices
Weight : 10 800 kg x 2
6 110
1 850
1 900
5 330
2 050
2 590
2 640
370
9 810
Width : 125
Arm cylinders
Weight : 5 020 kg x 2
904
Motor cover stay
Weight : 161 kg
Unit: mm
Width : 5 620
Width : 5 630
Width : 430
Other parts
Q’ty
Length mm
Width mm
Height mm
Net Weight kg
Content
Q’ty
Length mm
Width mm
Height mm
Net Weight kg
Cover 1
1
750
511
2 380
69
Handrail 1
2
1 980
426
1 010
20/@
Cover 2
2
725
511
2 380
66/@
Handrail 2
2
2 850
275
1 010
33/@
Cover 3
1
1 045
511
2 380
103
Cover 4
1
1 083
838
2 602
138
Cover 5
8
205
290
770
24/@
Cover 6
8
495
290
505
22/@
Cover 7
4
890
61
430
22/@
Ladder
1
460
626
2 160
26
Step
1
410
415
766
35
16
17
TRANSPORTATION
LIFTING CAPACITIES
BACKHOE ATTACHMENTS
Unit: mm
A: Load radius
B: Load point height
C: Lifting capacity
Boom assembly
Weight : 63 800 kg
METRIC MEASURE
Rating over-side or 360 degree
4 300
Conditions
EX8000- 6 / EX8000E- 6
BE-boom
11.5 m
BE-arm 5.8 m
Bucket
SAE, PCSA : 43.0 m³
CECE : 38.0 m³
Shoe 1 850 mm
12 170
Width : 3 160
Arm assembly
Weight : 57 600 kg
Notes: 12
10
8
6
4
2
0 (Ground)
-2
-4
12
14
Rating over-front
18
Unit: 1 000 kg
At max. reach
20
meter
*129
*106
*129
*106
*62.0
*92.2
*119
*120
*116
*105
*87.2
*62.0
*92.2
*119
*120
*116
*105
*87.2
*53.3
*61.5
*77.0
*96.5
*96.5
*92.8
*83.8
*66.8
*53.3
*61.5
*77.0
*96.5
*96.5
*92.8
*83.8
*66.8
*42.9
*50.8
*57.2
*65.9
*76.9
*78.2
*73.4
*62.9
*42.9
*50.8
*57.2
*65.9
*76.9
*78.2
*73.4
*62.9
*39.3
*43.8
*39.3
*43.8
*24.6
*25.3
*26.8
*29.2
*32.7
*27.5
*24.6
*25.3
*26.8
*29.2
*32.7
*27.5
1.Ratings are based on SAE J1097.
2.Lifting capacity does not exceed 75% of tipping load with the machine on firm,
level ground or 87% full hydraulic capacity.
3.The load point is a hook (not standard equipment) loaded on the back of the bucket.
4.*Indicates load limited by hydraulic capacity.
3 990
7 980
Load point
height
m
Load radius m
16
Width : 2 580
Boom cylinders
Weight : 9 910 kg x 2
Arm cylinders
Weight : 6 190 kg x 2
5 125
Width : 760
816
885
6 200
Width : 785
Estimated backhoe bucket dimensions.
Hitachi estimates 43.0 m3 bucket in 1 800 kg/cm2 material density or less.
Please inquire further as needed.
18
19
21.3
21.5
21.6
21.4
20.9
20.2
These specifications are subject to change without notice.
Illustrations and photos show the standard models, and may or may not include optional equipment,
accessories, and all standard equipment with some differences in color and features.
Before use, read and understand the Operator’s Manual for proper operation.
Hitachi Construction Machinery Co., Ltd.
www.hitachi-c-m.com
KS-EN240
13.01 (KA/KA,F T3)
Printed in Japan