A TrAdiTion of innovATionTM

Transcription

A Tradition of InnovationTM
OLIVER MACHINERY
2012 FALL CATALOG
Online Version
Effective Aug 1, 2012
$2.00
2012-2013 Catalog © 2012-2013 Oliver Machinery
i
table of contents
OL IV E R HIS TORY
4455 22” Planer.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 12
4470 25” Planer.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 13
4620 14” Band Saw.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 14
4630 18” Band Saw.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 14
4650 22” Band Saw.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 14
4705 Shaper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 15
4710 & 4750 Shapers.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 16
4920 Straight Line Ripsaw.. . . . . . . . . . . . . . . . . . . . . . . . . . ... 17
5025 Cutoff Saw.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 18
5220 16” Double Surface Planer. . . . . . . . . . . . . . . . . . . . . ... 19
5240 25” Double-Sided Planer.. . . . . . . . . . . . . . . . . . . . . . ... 20
5355 25” Wide Belt Sander.. . . . . . . . . . . . . . . . . . . . . . . . . . ... 21
5385 37” Wide Belt Sander.. . . . . . . . . . . . . . . . . . . . . . . . . . ... 21
5360 25” Double Wide Belt Sander. . . . . . . . . . . . . . . . . . ... 22
6310 Oscillating Edge Sander.. . . . . . . . . . . . . . . . . . . . . . ... 23
6910 Oscillating Spindle Sander.. . . . . . . . . . . . . . . . . . . . ... 23
8500, 8550 & 8600 Edge Banders. . . . . . . . . . . . . . . . . . . ... 24
8015 Membrane Press.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 25
9500 Sliding Table Saw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 25
Dust Collection.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 6- 27
Stock Feeders.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 8- 29
Tradition and Innovation. .................................. 1
MA CHINE S
1010 10” IntelliCarve 3D Lathe............................ 2
1010A 10” IntelliCarve 3D Attachment�� 2
1024 10” IntelliRouter. . . ................................... 2
1013 13” IntelliCarve.. . .................................... 3
1015 15” IntelliCarve PRO. ............................... 3
2018 18” Classic Lathe. ................................... 4
4012 10” Table Saw.. . . .................................... 5
4016 10” Table Saw.. . . .................................... 6
4045 12” Table Saw.. . . .................................... 6
4060 16” Table Saw.. . . .................................... 7
4220 6” Jointer. . . . . . . . . .................................... 8
4230 8” Jointer. . . . . . . . . .................................... 8
4240 10” Jointer. . . . . . . . .................................... 8
4255 12” Jointer. . . . . . . . .................................... 9
4270 16” Jointer. . . . . . . . .................................... 9
4260 12” Parallelogram Jointer. ........................ 1 0
4420 16” Planer. . . . . . . . . .................................. 11
warranty
O and we stand by their quality and
liver is proud of our machines
durability. If something does go wrong
with your machine, we want to make
sure it is made right. That’s why Oliver’s
standard warranty is one of the best in
the industry.
Warranty:
Oliver makes every effort possible to
assure that its equipment meets the
highest possible standards of quality and
durability. All products sold by Oliver are
warranted to the original customer to be
free from defects for a period of 2 (two)
years on all parts, excluding electronics
and motors, which are warranted for
1 year. Oliver’s obligation under this
warranty shall be exclusively limited
to repairing or replacing (at Oliver’s
option) products which are determined
by Oliver to be defective upon delivery
F.O.B. (return freight paid by customer)
Oliver, and on inspection by Oliver. This
warranty does not apply to defects due,
directly or indirectly, to misuse, abuse,
negligence, accidents, unauthorized
repairs, alterations, lack of maintenance,
damages caused in shipping, acts of
nature, or items that would normally
be consumed or require replacement
due to normal wear. In no event shall Oliver
be liable for death, personal or property
injury, or damages arising from the use of
its products. Oliver Machinery reserves
the right to effect at any time, without prior
notice, those alterations to parts, fittings, and
accessory equipment which they may deem
necessary for any reason whatsoever.
All specifications in this catalog are subject to
change without notice. All photos © 1999-2012
Oliver Machinery Company.
Further warranty details are available by emailing
[email protected]. r
For more information about Oliver Machinery products, or to
find an authorized dealer nearest you, visit us online at
www.olivermachinery.net or call toll free 800-559-5065
All efforts have been made to ensure that the information in this catalog is accurate. However Oliver Machinery does not
guarantee the accuracy of this information and reserves the right to change information in this catalog without notification.
ii
4240
10” Jointer
No. 144
8” Jointer
our tradition
Oliver Machinery can trace its roots all
the way back to 1890 in Grand Rapids,
Michigan. The company, founded by
Joseph W. Oliver, originally designed
and manufactured wood trimmers that
reduced labor time from 15 minutes
to only a few seconds, winning Oliver
a gold medal for merit at the 1900
World’s Fair in Paris.
In 1923 Oliver introduced the
Straitoplane, a combination planer
and jointer that could plane a warped
board perfectly flat and straight
on both surfaces in one pass. In
1929 Oliver sold over 9000 of these
machines. Today Oliver’s 5240
double-sided planer is a direct
descendant of the classic straitoplane.
In 1908 Oliver introduced the round
cutterhead, a much safer alternative to
the standard square cutterhead. The
new safety feature was so apparent
that many states soon began requiring
their installation.
Over the span of the twentieth century,
Oliver adapted to the ever-changing
American economy, manufacturing
bread-slicers during the depression,
saws for cutting aluminum, brass,
copper, steel and titanium during
World War II, and packaging and
printing machinery during the 1950’s
and 60’s.
By 1994, Oliver had produced over
150,000 machines, 75,000 of which
were still in operation on a daily basis
worldwide. Today, Oliver machines
represent the absolute finest in heavy
duty woodworking machines. Read
on to browse our innovation and our
current lineup. r
our innovation
Oliver Machinery has a long tradition of innovation. Even
since the turn of the century when Oliver introduced the
round cutterhead, they have been consistently improving
and modernizing their machines to give the user the best
product.
In addition to their technological determination, Oliver
remains true to the traditions of woodworking machinery.
This means their machines are consistently rugged, heavyduty, and better designed than the competition, which
means that your wood comes out straighter, more precise,
and better crafted than with any other machine.
In the spirit of American ingenuity, Oliver machines
improve on existing technology by utilizing features such
as helical cutterheads, spiral cutterheads, computerized
controls and sensors, segmented infeed rollers, and
advanced safety features.
Oliver’s machines consistently utilize cutting-edge
materials, precision engineering, and innovative features to
put them above and beyond the competition. Look inside to
see what we mean.r
1
1010
10” intelliCarve 3D
with Lathe
•
•
•
•
•
•
•
•
•
•
•
•
•
Input Power:120VAC 50/60HZ 1 (OP. 230VAC)
X/Z Travel :15”/4”
Max. Wood Diameter (A): 8”
Max. Depth Per Pass: 8mm
Bit Diameter:6mm(OP. 1/4”)
Spindle Motor: Brushless DC 500W 21,000rpm
X Axis Lead Screw: OD16mm / Pitch:10mm
Z Axis Lead Screw:OD16mm / Pitch:5mm
3 Axis Motor: Step
X/Z Axis Rail: IGUS Plastic Rail
Feed Rate X/Z: 3/1.5 M/min
Position Accuracy X/Z/A:0.1mm/0.1mm/0.9
Standard Software : i-Picture 3D
Features:
1010A
Can do almost 80% work 3D printer can do and more!
With dedicated CAM iPicture 3D supporting STL, IGS file formats.
Standing alone machine with MCU control core, simple structure and easy
to operate, with USB port.
Compatible with various lathe fixtures (1”-8TPI chucks & MT2 live centers)
Easy to maintain and clean, with IGUS bearing for dusty environment.
3D models data base support available.
10” intelliCarve 3D
Attachment
•
•
•
•
•
•
•
•
X/Z Travel: 12”/4”
Max. Wood Diameter: 10”
Standard Tool Cut Diameter: 2” – 10”
Optional Tool Cut Diameter: 0” ~ 8”
Brushless DC Spindle Motor
I-GUS Plastic Rail
Feed Rate X/Z: 1.5/3M/min
1024
24”x 36” intelliRouter
•
•
•
•
•
•
•
•
•
•
X/Y/Z Travel: 24”/36”/4”
Working Table Size: 24” x 36”
Max. Depth of Cut: 25mm
Spindle Motor: DW 618 M Router Motor 2.25HP 24000rpm
I-GUS Linear Rail
Step Motor
Max. Feed Rate: X/Y/Z: 6/10/10 M/min
Cut Feed Rate: X/Y/Z: 3/6/6/ M/min
Standard Software: iPicture & ArtCAM
2
1015
PRO
intelliCarve
1013
intelliCarve
Optional manual 4-Axis carving
accessory for 1015 Pro.
• Ball Type Lead Screw for Axial Movement
Give High Accuracy
IGUS precision guide bearings support the X Y Z travel ensuring accuracy and
longevity with little maintenance.
XZ Guide bushings are made from a special composite material, IGUS WX-01-10, to
insure high accuracy for the life of the machine and requires no oil lubrication, EVER!
• Long Lasting Aluminum Table with Secure
Hold Downs
• Hi-Torque DC Brushless Step Motor
• Rugged & User Friendly LCD Controller
• IGUS Precision Guide Bearings
• Supports GO0, GO1, GO2 & GO3 Circular
and Linear Interpolation
Model No.
1013
1015
Stock No.
1013.001
1015.001
X Axis Travel
13”
15.3”
Y Axis Travel
18”
20.5”
• Ball Screws for X, Y, Z Travel Give High
Accuracy & are Tolerant of Dust Build Up
Z Axis Travel
3”
4.13”
• I-Picture Software for Both Models
Max Object Size
13”X x 18”Y x 3”Z
15”X x 20”Y x 4”Z
• ArtCam Software Included with 1015 Pro
Tool Shank OD
1/4”
1/4”
Max Depth of Tool
1”
1”
Feed Speed X, Y, Z
3m/min
3.2m/min
Spindle Speed
15,000 RPM
23,000 RPM
Spindle Motor
150W, DC Brushless
500W, DC Brushless
Step Angle
1.8°
1.8°
Position Accuracy
0.003/0.003/0.0001”
0.003/0.003/0.0001”
Reposition Accuracy
± 0.1 mm
± 0.1 mm
Controller
LCD Display
LCD Display
Interface
USB 2.0 Port
USB Port
Software
iPicture for IntelliCarve
iPicture for IntelliCarve &
ArtCam Express
Overall Dimensions
28.5” x 24” x 29”
33” x 43” x 27”
Net Weight
80 lbs
132 lbs
software
The included i-Picture software program has the ability
to convert pixel images in the form of .jpg, .bmp, .png,
and .gif files into the 3D carvings or lithophanes.
easy to use!
1.
2.
3.
4.
Prepare artwork or photo
Drop art file into iPicture Software
iPicture converts the art to code
Drop the converted file onto the
USB flash drive
5. Plug the flash drive into the USB port on the
intelliCarve
6. Adjust settings and start the machine to have your
picture reproduced onto the material.
Hardware Minimum Requirements: Intel Core 2 Duo (or equivalent), 2 GB RAM, Open GL 2.0 compliant graphics card, 120 GB or
more hard disk space, 1280 x 1024 screen size, Windows XP or later.
TO FIND A DEALER CALL 1-800-559-5065
3
2018
Classic Lathe
•
•
•
•
•
•
•
All Cast Iron Construction
2HP Motor
Safety Guard
Variable Speed
Outboard Tool Rest
Digital RPM Meter
Reversing Motor for Outboard
Turning
• Dual Purpose Bed Extension
THE INCLUDED OUTBOARD
SUPPORT and tool rest allows
a huge 35” swing over the bed.
Model No.
2018
Stock No.
2018.001
Power Requirement
230V
Main Motor
2HP, 1Ph, 220V only
Swing Over Bed
18”
Distance Between Centers
42” (57” w/Extension)
Variable Speed
200-2400 RPM
Speed Range 1
200-600 RPM
Speed Range 2
600-2400 RPM
Spindle
1-1/4”-8 TPI RH headstock
Indexer
Up to 36 Flutes
Spindle & Tailstock Tapers
MT2
Spindle Bore
9/16”
Face Plate OD
6”
Centerline of Spindle to Floor
42-1/2”
Overall Dimension
69”Lx18”Wx48”H
Gross Weight
910 lbs
THE TRADITIONAL VARIABLE
SPEED pulley system eliminates
the troubles prone to frequency
drives.
A COMPARATOR JIG
is included with the
lathe.
4
4012
10” Table Saw, 3HP 1Ph
Model No.
4012
Stock No. (3HP, 1Ph)
4012.003
Blade Diameter
10”
Arbor Diameter
5/8”
Maximum Width of Dado
13/16”
Maximum Depth of Cut at 90°
3-1/8”
2-3/16”
Maximum Cut to the Right of Blade
50”
Maximum Cut to the Left of Blade
12”
Dust Port Diameter
4”
Table Dimensions w/Extensions
20”L x 27”W x 1-1/2”T
Table Height
34”
Blade Tilt
Left
Arbor Speed
4,300 RPM
Motor (1Ph)
3HP, 220V
Motor (3Ph)
N/A
Overall Dimensions
62 or 82”L x 41”W x 40”H
Gross Weight
658 lbs
• Precision Ground Cast Iron Worktable and Extension
Wings
• Innovative Cabinet Mounted Trunnion
• Powerful 3HP LEESON TEFC Motor
• True Riving Knife System Ensures Maximum Safety
• Quick Change from Blade Guard to Riving Knife
• Magnetic Safety Switch with Thermal Overload Protection
• Mitre Gauge with Fence, Standard Insert and Dado Insert
• Optimus Square Tube Fence System for High Accuracy
and Reliability
• 5/8” Arbor
• Large Precision Ground Table
• 48” Stock Fence Rails
• Triple V-Belt Drive for Exceptional Smoothness for Power
Transfer
5
4016
10” Table Saw, 5HP
•
•
•
•
•
•
•
Left Tilting 10” Blade
5/8” Arbor
Optimus Square Tube Fence System
Large Precision Ground Table
5HP Motor
36” Stock Fence Rails
Poly V-Belt Drive System for Exceptional
Smoothness
• Optional 52” Rip Rail and Extension Tables
SAFETY?
YOU CHOOSE. The 4045 comes
standard with a blade guard and a riving
knife. You choose the best one for the
job.
4045
12” Table Saw
•
•
•
•
•
•
•
•
•
•
•
Left Tilting 12” Blade
5/8” and 1” Interchangeable Arbor
5HP or 7.5HP Motor
Digital Angle Meter
36” Stock Fence Rails
Cast Iron Dampening Base
Use of Either Blade Guard or Riving Knife
Poly V-Belt Drive System for Exceptional Smoothness
Optional 52” Rails w/Side Table
Optional Rear Table
Pictured with optional 52” rail, side and rear tables.
Model No.
4016
4045
4016.003 (5HP, 1Ph)
4045.003 (5HP, 3Ph)
4016.004 (5HP, 3Ph)
4045.004 (7.5HP, 3Ph)
Blade Diameter
10”
12”
Arbor Diameter
5/8”
1” or 5/8”
Interchangeable
Maximum Width of Dado
13/16”
13/16”
3”
4”
2-1/4”
2-2/3”
36”
36”
Maximum Cut to the Left of Blade
12”
12”
Dust Port Diameter
4”
4”
Table Dimensions
w/Extensions
27”L x 33 1/3”W
30-3/4”L x 48-1/2”W
Table Height
36”
36”
Blade Tilt
Left
Left
Arbor Speed
3,450 RPM
3,450 RPM
Motor (1Ph)
5HP, 220V
5HP, 220V Only
Motor (3Ph)
5HP, 220V or 440V
Prewired 220V
7.5HP, 220V/440V
Prewired 220V
Overall Dimensions
74”L x 32-½”W x 40”H
75”L x 45”W x 41”H
Gross Weight
658 lbs
800 lbs
INNOVATION YOU ASK?
How does a hydraulically
assisted worm/pinion gear,
blade lift mechanism sound?
Ever thought you’d look
forward to raising the blade?
6
A BLADE
ENCOMPASSING DUST
collection shroud joined
with the standard 4” outlet
makes for the best dust
extraction possible.
A DIGITAL ANGLE
METER takes the
guess work out of
mitre cuts.
4060
16” Pro Table Saw
Model No.
4060
4060.001
Blade Diameter
14” - 16”
Arbor Diameter
1”
5-1/2”
4-1/4”
52”
Dust Port Diameter
4”
Table Height
36”
Right
Arbor Speed
3,750 RPM
Motor (3Ph)
10HP
Gross Weight
Right Tilting 16” and 14” Blade
1” Arbor
Expansive, Precision Ground, Work Table
52” Rip Capacity
Massive 10 HP, 3Ph Motor
Exclusive Cast Iron Dampening Base
38” D x 48” W
Blade Tilt
Overall Dimensions
•
•
•
•
•
•
•
IN TRUE OLIVER FASHION
this massive, well designed
trunnion assembly will never
let you down.
54”D x 85-1/2”W x 42-1/2”H
1040 lbs
TWELVE POUND MITRE
GAUGE and unmovable
T-square fence facilitate
positive feeding and
smooth cuts.
7
NEED TO RIP 4X4’S? With
a 10HP motor driving 4 Vbelts and a 16” saw blade,
it’s not a problem.
Jointers
4240
10” Jointer
4230
4220
8” Jointer
6” Jointer
• Precision Ground Table for Perfect Jointing
• Super Long Bed
• Solid Cast Iron Base Gives Vibration-Free
Operation
• Powerful Motor for Easy Cutting
• Extra Wide Base for Stability
• Stock Helical Cutterhead with Long-Lasting, Quick
• Change, Carbide Inserts (on 4220 & 4230 only,
optional on 4240)
Model No.
4240
4230
4220
Stock No.
4240.001 (3HP, 1Ph, Straight)
4230.201 (2HP, 1Ph, Helical)
4230.201 (2HP, 1Ph, Helical)
Stock No.
Stock No.
4240.101 (3HP, 1Ph, Spiral)
N/A
N/A
N/A
Stock No.
4240.104 (5HP, 3Ph, Spiral)
N/A
N/A
Stock No.
4240.201 (3HP, 1Ph, Byrd)
N/A
N/A
Stock No.
4240.204 (5HP, 3Ph, Byrd)
N/A
N/A
Infeed Table Travel (in.)
5/8”
1/2”
1/2”
Cutterhead Speed (RPM)
6000 RPM, 3 V-Belts
5500 RPM, 2 V-Belts
5500 RPM, V-Belts
4
Number of Knives (Straight)
4
Number of Knives (Spiral)
3
N/A
Number of Knives (Helical)
64
54
35
Rabbeting Capacity
5/8”
1/2”
1/2”
Dust Port Diameter
6”
4”
4”
Table Dimensions
84”L x 11”W
74-7/8”L x 9-1/4”W
66-1/2”L x 77-1/4”W
Fence Dimensions
45”L x 4-3/4”H
38”L x 4”H
38”L x 4”H
Fence Tilts
90° - 45°
90° - 45°
90° - 45°
Positive Stops
90° and 45°
90° and 45°
90° and 45°
Overall Dimensions
84”L x 30”W x 38 1/2”H
75-½”L x 32”W x 41”H
67”L x 24”W x 32”H
Gross Weight
1,000 lbs
655 lbs
350 lbs
N/A
8
N/A
4255
&
4270
12” Jointer & 16” Jointer
• 60 3/8” (4255) & 68 1/2” Fence (4270)
• Precision Ground Table For Perfect Jointing
• Super Long Beds: 92” Bed (4255) & 102”
Bed (4270)
• Dovetail Ways for Precision Table Adjustment
• Powerful 3HP/5HP | 5HP/7.5HP BaldorTM
Motor Prevents Bogging
• Solid and Massive Cast Iron Base For
Vibration-Free Operation
• Extra Wide Base for Stability
Model No.
4255
4270
Stock No. (Straight)
4255.001
(3HP, 1Ph)
4270.001
(5HP, 1Ph)
Stock No. (Straight)
4255.002
(5HP, 3Ph)
4270.002
(7.5HP, 3Ph)
Stock No. (Helical)
4255.101
(3HP, 1Ph)
4270.101
(5HP, 1Ph)
Stock No. (Helical)
4255.102
(5HP, 3Ph)
4270.102
(7.5HP, 3Ph)
Infeed Table Travel
1”
1”
Cutterhead Speed
6000 RPM
6,000 RPM
Number of Knives (Straight)
4
4
Rabbeting Capacity
3/4”
3/4”
Dust Port Diameter
6”
6”
Table Dimensions
92”L x 13”W
102”L x 17”W
Table Height
32”
32”
Fence Dimensions
60-3/8”L x 5-5/8”W
68-1/2”L x 5-1/2”W
Fence Tilts
90° - 45°
90° - 45°
Positive Stops
90° and 45°
90° and 45°
Motor (1Ph)
3HP, 220V
5HP, 220V
Motor (3Ph)
5HP, 220V/440V,
Prewired 220V
7-1/2HP, 3Ph,
220/440V Prewired
220V
Overall Dimensions
92”L x 39”W x 40”H
102”L x 45”W x 40”H
Gross Weight
1,700 lbs
2,200 lbs
TWO-PIECE TABLES
make it easy to adjust when
parallelism is needed.
HELICAL CUTTERHEAD
Long-last four-sided solid
carbide knives greatly
reduce cutterhead noise.
Each indexable knife is
sharpened on all sides, so
just give them a spin and
they’re as good as new with
no knife setting required!
NOISE REDUCTION SLOTS FOR
QUIET OPERATION These slots
help reduce noise
generated by
air travel
between the
cutterhead
and table.
Oliver jointers
are quiet to
begin with,
this helps
make them even quieter.
LARGE HAND WHEEL FOR
EASY DEPTH ADJUSTMENTS
gives you full control over your
jointer depth. Dovetailed ways
keep the table stable and true.
9
4260
12” Parallelogram Jointer
Model No.
4260
Stock No. (Helical)
4260.201
(3HP, 1Ph)
Stock No. (Helical)
4260.202
(5HP, 3Ph)
Infeed Table Travel
3/4”
Cutterhead Speed
6000 RPM
Rabbeting Capacity
3/4”
Dust Port Diameter
6”
Table Dimensions
88”L x 12-1/8”W
Table Height
34”
Fence Dimensions
60-1/4”L x 5-3/8”W
Fence Tilts
90° - 45°
Positive Stops
90° and 45°
Motor (1Ph)
3HP, 220V
Motor (3Ph)
5HP, 220V/440V,
Prewired 220V
Overall Dimensions
88”L x 40”W x 41”H
Gross Weight
1,700 lbs
•
Parallelogram Style
•
Precision Ground Table for
Perfect Jointing
•
Long 88" Bed
•
Powerful 3HP or 5HP BaldorTM
Motor Prevents Bogging
•
Massive Construction Throughout Gives Stable
Vibration-Free Operation
•
Wide Base for Stability
FENCE
Rack & pinion fence
allows for quick &
precise adjustments.
HELICAL CUTTERHEAD
Long-lasting quad-sided solid
carbide knives greatly reduce
cutterhead noise. Each indexable
knife is sharpened on all sides, so
just give them a spin and they’re as
good as new with no knife setting
required!
Large hand wheel for
easy depth adjustments
gives you full control over your
jointing depth. Parallelogram
adjusting tables guarantee your
work is always true.
Massive ribbed cast
iron construction ensures
flatness, stability &
longevity.
10
4420
16” Planer with Helical Cutterhead
•
•
•
•
•
•
Digital Readout with Tape Backup
5 Rows 4 Sided German Carbide
Knife Inserts
Cast Iron Extension Tables
Built in Casters for Mobility
Polished Steel Rollers
2-Speed Gearbox
Model No.
4420
Stock No. (5HP, 1Ph, Helical)
4420.201
4420.202
Maximum Stock Width
16”
Maximum Depth of Cut
1/8”
Maximum Stock Thickness
6”
Minimum Stock Thickness
3/16”
Minimum Stock Length
6”
Dust Port Diameter
4”
Infeed Roller Diameter
3”
Feed Speeds
16/20 FPM
Bed Rollers
2, Adjustable
Table Size
16”L x 20”W
Table Size w/Extension Wings
16”L x 44”W
Cutterhead Diameter
3”
Cutterhead Speed
5,000 RPM
Table Support
2-Column
Motor (1Ph)
5HP, 220V Only
Gross Weight
570 lbs
DIGITAL READOUT takes
the guess work out of
thickness settings.
MASSIVE CAST iron extension
wings to support heavy stock.
SERRATED STEEL infeed
roller feeds any stock with
ease.
11
4455
22” Planer
Model No.
4455
Stock No. (7.5HP, 1Ph, Straight)
4455.001
Stock No. (10HP, 3Ph, Straight)
4455.002
Stock No. (7.5HP, 1Ph, Helical)
4455.103
4455.104
Maximum Stock Width
22”
Maximum Depth of Cut
3/16”
9”
1/8”
10”
Dust Port Diameter
5”
Minimum CFM Required
900 CFM
3”
Outfeed Roller Diameter
3-5/16”
Feed Speeds
20 and 30 FPM
Bed Rollers
2, Adjustable
Table Size
32-1/4”L x 23-3/4”W
Footprint
44”L x 22”W
Overall Dimensions
45”W x 32”D x 50”H
Cutterhead Diameter
3”
Number of Knives (straight)
4
Number of Knives (helical)
90 (30mm) 146 (Byrd)
Cutterhead Speed
5,000 RPM
Table Support
2-Column
Motor (1Ph)
7.5HP, 220V Only
Motor (3Ph)
10HP, 240V/440V,
Prewired 220V
Gross Weight
1,568 lbs
• HSS Straight Four Knife Cutterhead (Optional Helical
Cutterhead)
• Sectional Infeed Roller and Chip Breaker
• 2 Feed Speeds 20/30 FPM
• Digital Thickness Scale
• 7.5 or 10HP Motor
• Easy Access to Motor and Gearbox
• Easy Access to Cutterhead and Sectional Feed Rollers
HELICAL CUTTERHEAD (OPTIONAL) Long lasting double
sided solid carbide knives greatly reduce cutterhead noise.
Each indexable knife is sharpened on two sides, so just turn
them once and they’re
as good as new with no
knife setting required!
EASY ACCESS TO CUTTERHEAD keeps maintenance
time to a
minimum.
POWERFUL
7.5HP MOTOR &
OIL GEARBOX
WITH 2 SPEED
keeps the
machine purring
like a tiger.
SECTIONAL INFEED ROLLER/
CHIP BREAKER & TWIN BED
ROLLERS make sure your stock
feeds accurately and comes out
true, no matter what shape it went
in.
12
4470
25” Planer
Model No.
4470
4470.001
4470.002
4470.101
4470.102
Maximum Stock Width
25”
9-1/4”
1/8”
10”
Dust Port Diameter
5”
900 CFM
3”
Steel Outfeed Roller Diameter
3” (x2)
Feed Speeds
20, 25 and 30 FPM
Bed Rollers
2, Adjustable
Table Size
32”L x 26”W
Cutterhead Diameter
3-3/8”
Number of Knives (straight)
4
Number of Knives (helical)
170
Cutterhead Speed
4,800 RPM
Table Support
2-Column
Motor (1Ph)
10HP, 240V Only
Motor (3Ph)
15HP, 240V/440V,
Prewired 220V
Gross Weight
1,837 lbs
Overall Dimensions
46”L x 23”W x 56”H
•
•
•
•
•
HSS Straight Four Knife Cutterhead or Optional Helical Cutterhead
Sectional Infeed Roller and Chip Breaker
Feed Speeds 20/25/30FPM
Two Driven Outfeed Rollers
Digital Thickness Controller and Up/Down Powered Table
Travel
• 15HP 3Ph or 10HP 1Ph Motor
• Beefy Table Supports
POWERFUL MOTOR & OIL
GEARBOX W/3 SPEED keeps
the machine purring like a tiger.
SECTIONAL INFEED ROLLER/
CHIP BREAKER, THREE FEED
ROLLERS AND TWIN BED
ROLLERS make sure your stock
feeds accurately and comes out
true, no matter what kind of stock
you are running.
HELICAL CUTTERHEAD (OPTIONAL) Long lasting four
sided solid carbide knives greatly reduce cutterhead noise.
Each indexable knife is sharpened on four sides, so just turn
them once and they’re as good as new.
DIGITAL THICKNESS CONTROL
& EASY BED ROLLER
ADJUSTMENT make for quick
adjustments and setup.
13
4650
4630
14”, 18” & 22” Band Saws
4620
4650 blade guides anodized aluminum
blade guides support both bakelite & roller
bearings for extra blade support.
Model No.
4620
4630
4650
Stock No.
4620.001
(1.5HP, 1Ph)
4630.001
(2HP, 1Ph)
4650.001
(5HP, 1Ph)
N/A
4630.002
(2HP, 3Ph)
4650.002
(5HP, 3Ph)
Blade Speed FPM
1,480/2,300/3,240
1,480/2,300/3,240
4,900
Wheel Diameter
14”
18”
22”
Table Dimension
16”W x 20”L
18”W x 18”L
30-1/4”W x 23”L
Throat Distance
13-5/8”
17-1/2”
21-1/2”
Max. Stock Height
12”
12”
16”
Blade Length
108”
133”
136”
Blade width Cap.
1/4” to 1”
1/4” to 1-1/4”
1/4” to 1-1/4”
Table Height at 90°
38”
37-1/2”
37”
Table Tilt Limits
-10° to 45°
-10° to 45°
0° to 45°
Motor (1Ph)
1.5HP, 220V Only
2HP, 220V Only
5HP, 220V Only
2HP, 220V/440V
Prewired 220V
5HP, 220V/440V
Prewired 220V
500 lbs
1054 lbs
Motor (3Ph)
Gross Weight
N/A
305 lbs
14
Balanced Cast
Iron Wheels with
rubber tires
keep vibration to a
minimum as they guide
and propel the blade
4705
Shaper
• Interchangeable Spindles
• Digital Display of Spindle Height
• Micro-Adjustable Fence with Full
Safety Features
• 7.5 or 5 HP Motor
• Massive Cast Iron Table
• Cast Iron Dampening Base
Model
4705
4705.001
Stock No. (7.5HP, 3Ph)
4705.002
Table Dimensions
39”L x 31-1/2”W
Table Height
36-1/2”
Vertical Spindle Travel
4”
Spindle Direction
Reversible
Spindle Speed
5,000, 7,000, 10,000 RPM
Maximum Tool Diameter
7” Below Table, 8” Above Table
Spindle Diameter
1-1/4” and 3/4” Interchangeable
Dust Port Diameter
4”
Minimum CFM
800
Motor (1Ph)
5HP, 220V only
Motor(3Ph)
5HP, 220/440V, Prewired 220V
Machine Dimensions
39”L x 31”W x 45”H
Gross Weight
870 lbs
THE THREE INCLUDED
TABLE inserts allowing for
various cutter diameters.
MICRO-ADJUSTABLE FENCE
WITH FULL SAFETY FEATURES
AN INNOVATIVE
dovetail system raises
and lowers the quill
assembly ensuring
accuracy and longevity.
ERGONOMIC CONTROL
PANEL includes a digital
readout with set table
reference point for spindle
height.
15
4710 & 4750
Sliding Table & Non-Sliding Shaper
Model
4710
4750
4710.001
4750.001
4710.002
4750.002
Table Dimensions
41-1/2”L x 29-1/2”W
41-1/2”L x 29-1/2”W
Table Height
34-1/4”
34-1/4”
Sliding Table Travel
N/a
39-1/2”
Sliding Table Size
N/a
41-1/2 x 9”
Spindle Speed
3,000, 4,000, 6,000,
8,000, 10,000 RPM
3,000, 4,000, 6,000,
8000, 10,000 RPM
Spindle Direction
Reversible
Reversible
Vertical Spindle Travel
5”
5”
Maximum Tool Height
5”
5”
Maximum Tool
Diameter
8-1/2”
8-1/2”
Spindle Diameter
1-1/4”
1-1/4
Dust Port Diameter
4”
4”
Minimum CFM
800
800
Motor (1Ph)
5HP, 220V only
5HP, 230V
Motor(3Ph)
5HP, 230/460V,
Prewired 230V
5HP,230/460V,
Prewired 230V
Shipping Dimensions
41½”L x 34½”W x
49”H
41½”L x 34½”W x 49”H
Gross Weight
950 lbs
1,050 lbs
•
•
•
•
•
•
•
Cast Iron Mitre Gauge with Hold-Down
Locking Spindle
Sliding Table (4750 Only)
Large Cast Iron Table
Reversible Spindle
5 Speed Step Pulley (3,000 - 10,000 RPM)
Heavy Cast Iron Base
CAST IRON
MICRO
ADJUSTABLE
FENCE
ASSEMBLY allows
you to make the
finest adjustments.
4710 MODEL is the non-sliding
table equivalent of the 4750.
FIVE SPEED
PULLEY
ASSEMBLY allows
for a wide range of
speeds.
16
THE SLIDING TABLE IN ACTION
gives you a stable and smooth
platform for your work; the cast-iron
mitre gauge with hold-down firmly
secures the work piece.
4920
Straight Line Rip Saw
•
Pivoting Control Panel
•
Precision Cast Iron Micro-Adjustable
Rip Fence
•
Two Rows of Anti-Kickback Fingers
•
6” Wide Cast Iron Feed Chain
•
Adjustable Spring Loaded Pressure
Rollers
•
Automatic Feed Chain Lubrication
•
Laser (Optional)
Precision machined
cast-iron micro
adjustable fence is
quick and easy to adjust
and guides the stock
securely
Model No.
4920
4920.001
Arbor Diameter
1”
Blade Diameter
12”
Blade Speed
4,500 RPM
Feed Speed
36-150 FPM Variable
Max Cutting Depth
3-3/8”
Minimum Board Length
8”
Maximum Ripping Width
18”
Pressure Rollers
7
Anti-Kickback Devices
2
Table Size
35”W x 54-1/4”L
Table Height
32”
Dust Collection Port
4”
600 CFM
Feed Motor
2HP, 3Ph 230/460V
Control
Soft Start
Motor(3Ph)
15HP, 3Ph 230/460V
Prewired 230
Overall Dimensions
61”L x 45”W x 64”H
Gross Weight
2,290 lbs
Seven pressure
rollers hold material
securely to the caterpillar
chain.
Two sets of antikickback fingers ensure
operator protection and
safety.
17
5025
18” Cutoff Saw
Model No.
5025
Stock No. (7-1/2HP, 1Ph)
5025.001
Stock No. (7-1/2HP, 3Ph)
5025.002
Arbor Speed
3450 RPM
Arbor Size
1”
Blade Size
18”
Cutting Capacity at Maximum Height
4-1/4” x 9-3/4”
Cutting Capacity Width
1” x 13-3/8”
Table Size
26-1/4” x 27-1/2”
Table Height
32-3/4”
Air Supply Required
15 / 70 (CFM/PSI)
Maximum Cycles Per Minute
60
Dust Port
4”
Minimum Dust Removal
600 CFM
Main Motor(1Ph)
7-1/2HP, 220V Only
Main Motor(3Ph)
7-1/2HP, 220/440V
Prewired 220V
Gross Weight
800 lbs
Gross Weight (Roller Table Set Infeed/
Outfeed)
200 lbs
Overall Dimensions
30”L x 32”W x 44”H
•
•
•
•
•
•
•
Full Coverage Guards
Easily Adjustable Work Piece Clamp Height
Easy Blade Access
Automatic Safety Kill Switch Guard
Cast Iron Fence and Table
Adjustable Cutting Cycles
Conveniently Located Controls and Foot Pedal
OPTIONAL ROLLER
TABLES WITH
ADJUSTABLE STOPS
make repetitive cuts
quick and accurate.
FULL COVERAGE
GUARDS help keep
workers safe and
productivity high.
SHOWN WITH optional rail and table assembly.
4” DUST PORT AND
PNEUMATIC FOOT
PEDAL allow for efficient
dust collection and quick
cutting.
CUTTING CAPACITY
18
5220
16” Double Surface Planer
• Top & Bottom Helical Cutterhead
with Carbide Inserts
• 56” Cast Iron Feeding Table
• Four Driven Feed Rollers
• Jointing Capability
• Two Powerful Cutting Motors
Digital display takes
the guess work out of
thickness settings.
Model No.
5220
Stock No. (5HP/1HP) Helical
5220.201
Maximum Stock Width
16”
Maximum Cutting Depth Upper Cutter
Stock Width Below 6”: 3/16”
Maximum Cutting Depth Upper Cutter
Stock Width Over 6: 1/16”
Maximum Thickness
6”
Feed Speed
15 - 20 FPM
Cutterhead Speed
600 RPM
Cutterhead Diameter
Upper & Lower Cutter
2-7/8”
Number of Knife Inserts
108 Per Head
Dust Port Diameter
5” (x2)
Table Dimensions w/o Extensions
44”L x 17-3/4”W
56”L X 17-3/4”W
Cutterhead Diameter
5”
Dust Port Diameter
6”
Table Dimensions
27”L x 103”W
Motor 1Ph - 3,450 RPM
Top 5HP, 220V, 60Hz
Bottom 3HP, 220V, 60Hz
Motor 3 Ph - 3,450 RPM
Top 7.5HP, 220V, 60Hz
Bottom 5HP, 220V, 60Hz
Overall Dimensions
56”D x 40”W x 55”H
Gross Weight
570 lbs
Four powered feed rollers
effortlessly push even the toughest stock
through. The first one being a newly designed
spike roller followed by two steel and finally a
rubber out feed roller.
2-1/4” Massive support Columns maximize
rigidity resulting in superior product. Plus four
hydraulic pistons for stability and assisted lifting.
19
5240
25” Jointer-Planer
•
•
•
•
•
•
•
•
Digital Thickness Control
Quick Set Thickness Gauge
Variable Feed Speed
Automatic Conveyor Lubrication
Finger-Type Feed Conveyor
East Access to Helical Cutterheads
Belt Tension Quick Release
Long Lasting Carbide Knives Need No
Sharpening
• Finger-Type Feed System Allows for Variation
in Material Thickness and Smooth Feeding
• Also Available Oliver’s 5250 40” Jointer-Planer
Model No.
5240
Stock No.
5240.101
Maximum Stock Width
25”
8”
12
Feed Speed
21 - 66 FPM
Cutterhead Speed
5,000 RPM
Number of Knives Per Cutter
Head
164
Knife Size
0.57” x 0.57” x 0.1”
Cutterhead Diameter
5”
Dust Port Diameter
6”
Table Dimensions
27”L x 103”W
Motor (Bottom Cutterhead)
20HP, 3Ph, 220V/440V
Prewired 220V
Motor (Top Cutterhead)
25HP, 3Ph, 220V/440V
Prewired 220V
Motor (Feed)
3HP, 3Ph, 220V/440V
Prewired 220V
Motor (Table Elevation)
1/2HP, 3Ph, 220V/440V
Prewired 220V
Gross Weight
7,900 lbs
Overall Dimensions
105”L x 44”W x 67”H
AUTOMATIC LUBRICATION FOR FEED
CONVEYOR keeps
chain healthy and
stock running smooth.
VARIABLE SPEED FROM
21 TO 66 FMP gives you
full control over your finish.
20
EASY ACCESS TO
HELICAL CUTTERHEADS
Slide out cutterhead makes
changing knives a breeze.
5355 & 5385
25” & 37” Single-Head Wide Belt Sanders
•
•
•
•
•
Digital Thickness Controller
Thickness Sensor
Variable Speed Feed
Fully Adjustable and Removable Platen
Heavy Ground Table Supported by Four Elevating
Screws
• Y-Delta Soft Start on Main Motor
• Infeed Support Roller 2 PCS with Support Bracket
• Pressure Shoe with Roller
LONGER LIFE
The 5355 & 5385 have 75” belts (most
belt sanders are 60”), which gives
you 20% more sanding area for better
cooling, less loading and longer belt life.
DIGITAL CONTROLS allow for
accurate and quick thickness
settings; just dial in the stock height
and how much you want to take off,
and go.
Model No.
5355
5385
5355.003
5385.003
Maximum Stock Width
25”
37”
5”
5”
1/8”
1/8”
Air Requirements
80 PSI
80 PSI
Exhaust Value Required
800 CFM
1,600 CFM
Abrasive Belt Dimensions
75”L x 25”W
75”L x 37”W
Main Motor
15HP, 3Ph, 220/440V Prewired
220V
20HP, 3Ph, 220/440V Prewired
230V
Conveyor Motor
1HP, 1Ph, 220V Only
1HP, 3Ph 220/440V Prewired 220V
1HP, 1Ph, 220V Only
1HP, 3Ph 220/440V Prewired 220V
Table Height/Digital Readout
1/4HP
1/4HP
Gross Weight
1,985 lbs
2,425 lbs
Overall Dimensions
53”L x 46”W x 85”H
53”L x 58”W x 85”H
21
POWERFUL VARIABLE
speed drive with reduction
gear box pulls even the
highest stock through.
FOUR ELEVATING SCREWS
eliminate table pivoting and
ensure accuracy.
5360, 5390 & 5395
25”, 37” & 43” Double-Head Wide Belt Sanders
•
•
•
•
•
•
•
•
Digital Thickness Controller
Photo Sensors for Tracking
Variable Speed Feed
Fully Adjustable and Removable Platen
Heavy Ground Table Supported by Four Elevating Screws
Y-Delta Soft Start on Main Motor
Infeed Support Roller 2 PCS with Support Bracket
Pressure Shoe with Roller
ADJUSTABLE air
pressure inlet.
B & A TYPE SANDING
heads support all sanding
applications.
Model No.
5360
5390
5395
Stock No.
5360.003 (15HP, 3Ph)
5390.003 (20HP, 3Ph)
5395.003 (25HP, 3Ph)
Maximum Stock Width
25”
37”
43”
6”
6”
6”
1/8”
1/8”
1/8”
Air Requirements
80 PSI
80 PSI
80 PSI
Dust Port Diameter
5”
5”
5”
Exhaust Value Required
800 CFM
1,600 CFM
1,900 CFM
Abrasive Belt Dimensions
75”L x 25”W
75”L x 37”W
75”L x 43”W
Feed Speed
Variable, 15 - 49 FPM
Main Motor
15HP, 3Ph, 220/440V
Prewired 220V
20HP, 3Ph, 220/440V
Prewired 220V
25HP, 3Ph, 220/440V
Prewired 220V
Conveyor Motor
1HP, 3Ph 220/440V
Prewired 220V
1HP, 3Ph 220/440V
Prewired 220V
1HP, 3Ph 220/440V
Prewired 220V
Table Height Motor/Digital Readout
1/4HP
1/4HP
1/4HP
Gross Weight
2,755 lbs
3,637 lbs
4,078 lbs
Overall Dimensions
63”L x 45.5”W x 86.5”H
63”L x 57.5”W x 86.5”H
63”L x 65”W x 86.5”H
22
6310
Oscillating Edge Sander
•
•
•
•
•
•
•
•
•
6” X 108” Oscillating Edge Belt Sander
2HP/1Ph
Easy to Operate
Tables Move Up and Down to Fit the Job
Front Table Titles 45o for Beveled Edge
Sanding
Easy Abrasive Belt Tension and Tracking
Adjustment
Graphite Backing Reduces Friction and For
Longer Belt Life
Precision Machined, Dynamically Balanced
Aluminum Drive Pulleys
Heavy Steel Base Ensures a Solid Stable
Platform While Sanding
Large Steel Front Table Equipped with Tilting
and Height Adjustments
6910
Oscillating Spindle Sander
Model No.
6910
Stock No.
6910.003
Table Material
Cast Iron
Table Size
25-1/4” x 27-1/4”
Table Tilt
0 to 45°
Table Height (Floor to Top, in.)
42-1/2”
Number of Table Inserts
3
Spindle Speed (RPM)
1,720 RPM
Oscillation Travel (in.)
1-1/2”
Oscillations Per Minute
75
Spindle Sizes (dia. x length, in.)
1/4 x 5
3/8 x 6
1/2 x 6
5/8 x 6
3/4 x 9
1x9
1-1/2 x 9
2x9
3x9
4x9
Dust Port Diameter (in.)
4”
Overall Dimensions (L x W x H/in.)
25-1/4 x 27-1/4 x 50
Motor (1Ph)
2 HP, 110V/220V
Gross Weight (lbs.)
320 lbs
•
•
•
•
•
•
Oscillation Provides an Extremely Fine Sanding Finish
Easy Change Spindles
Precision Ground Tilting Table
Oscillation Control Box Runs in Oil Bath
Heavy Gauge Steel Frame
Built in Storage on Side of Cabinet
QUICK CHANGE SPINDLES
keep downtime low and
productivity high.
23
OUT OF THE WAY SPINDLE
STORAGE holds up to 10
extra spindles.
8500
Compact Edge Banding
•
•
•
•
•
•
•
•
•
•
GLUING - END CUTTING - TOP & BOTTOM TRIM - SCRAPING - BUFFING
8550
Compact Plus Edge Banding
•
•
•
•
•
•
•
•
•
•
•
•
•
MDF/PB Auto Glue Dispense Unit
Auto Stop Sensor for PVC ‘End of
Roll’
User Friendly Control Panel
High Frequency Motor (8500M)
Diamond Trimming Cutter (8500M)
Fast and Quiet Performance (8500K)
150mm Working Distance (8500K)
Simple Cutter Change and
Adjustments
Efficient Dust Collection
Quick Adjustments Using Digital
Counters
Easy Change for Edge Thickness
Glue Pot Safety Cover
Auto Stop Sensor for PVC ‘End of Roll’
User Friendly Control Panel
High Frequency Motor (8550M)
Diamond Trimming Cutter (8550M)
Corner Trimming Unit 4-Head Air
Simple Cutter Change and
Adjustments
Efficient Dust Collection
Quick Adjustments Using Digital
Counters
Easy Change for Edge Thickness
GLUING - END CUTTING - TOP & BOTTOM TRIM - SCRAPING - CORNER
TRIMMING - BUFFING
8600
Premium Edge Banding
•
•
•
•
•
•
•
•
PRE-MILL - END CUTTING - TOP & BOTTOM TRIM - SCRAPING - CORNER
TRIMMING - BUFFING
24
Auto Stop Sensor for PVC ‘End of Roll’
Metal Sensing Device for Cutter
Protection
Quick and Easy Adjustments
Diamond Cutter
High Frequency Motor
Massive I-Beam Construction
8015
Membrane Press
Model No.
8015
Stock No.
8015.101
Table Internal Length
50”x102.36
Table External Length
53.15”x105.5”
Working Height
3.15”
Working Table
Auto - Two Tables
Motors of Working Table
0.4 Kw x 2
Installation of Toggle
4 Units
Hydraulic Pump
15HP
Hydraulic Cylinder
80mm Diameter x 2
Units
Capacity of Heater
37 Kw
Vacuum Pump
1.5 Kw
Table Weight
1.5 Ton
Dimensions
230.32”x88.58”x76.77”
Gross Weight
9 Ton
•
•
•
•
•
•
Membrane or Membraneless Operation
Two Powered 53” x 105" Trays
Patented Toggle Lock Table System
3.15” Working Height
57 PSI Forming Pressure
99 Recipe Management
9500
10’ Sliding Table Saw
•
•
•
•
•
•
•
•
Powerful 7.5HP, 3Ph Motor
Manufactured with State of the Art CNC Machining Centers Ensure
Precision Components and Perfect Fit
The Aluminum Alloy Multi-Chamber Carriage is Machine and Imported
from Europe with Strict Attention Paid to the Anodizing and Hardening
Processes
High Tensile, Heat Treated Steel Guide Rods are Chrome Plated to
Ensure Perfect Lifetime Cutting Accuracy
Both the Blade Height and Tilt Adjustments are Conveniently Located
LED Displays for Both Tilt Angle and Blade Speed
Simple and Accurate Scoring Blade Adjustment
Overhead Saw Guard
25
Dust Collection
7120
Portable Dust Collector 1HP
•
•
•
•
5 Micro Top Filter Bag
CFM: 550
Plastic Chip Collection Bag Shows You
When the Bag Needs to be Emptied
Sturdy Steel Base with Four Easy-Gliding
Wheels for Moving
7145
Portable Dust Collector 3HP
•
•
•
•
5 Micro Top Filter Bag
CFM: 2,170
Plastic Chip Collection Bag Shows You When
the Bag Needs to Be Emptied
Sturdy Steel Base with Four Easy-Gliding
Wheels for Moving or for Storing Out of the Way
7140
Dust Collector 2HP
•
•
•
•
Bag Holders Assist When Installing the
Collection Bag
Spring Lever Bag Clamp
42-Gallon Collection Bag
1 Micron Filter Bag
Optional Canister
Filter Available.
26
Model No.
7140
Stock No.
7140.001
Motor
2HP, 1Ph
Air Flow
1,550 CFM
Static Pressure
11 in. H2O
Inlet Diameter
6” or 4” x 2”
Bag Diameter
19-5/8”
Drum Capacity
42 Gallon
Sound Rating
(Noise@10 ft)
75-85 dB
Overall Size
39”x32”x79”
Gross Weight
125 lbs
7150 & 7160
7155 & 7165
•
Cyclone Separator
•
60-Gallon Refuse Drum on Casters
•
Quick Release for Drum Emptying
•
1 Micron Filter Canister
•
Self Cleaning Canister
ACTUATOR
AUTOMATICALLY
sweeps the inside of the
canister after the system
is shut off.
Model No.
7150
7160
Stock No.
7150.001
7160.001
Motor
3HP, 1Ph
5HP, 1Ph
Air Flow
2,000 CFM
3,500 CFM
Static Pressure
13 in. H2O
16 in. H2O
Inlet Diameter
8” or 4” x 3”
10” or 4” x 4”
Bag Diameter
19-5/8”
23-5/8”
Drum Capacity
60 Gallon
60 Gallon
Sound Rating
(Noise@10 ft)
75-85 dB
75-85 dB
Overall Size
67”x45”x91”
71”x51”x118”
Gross Weight
253 lbs
405 lbs
Oliver cyclone dust collectors have all the desired
features you look for when purchasing a dust
collector. One micron filter, magnetic switch, drum
casters, quick drum release and craftsmanship
to name a few. Powerful enough to be used as a
central system for the small shop or use the included
splitter to connect directly to individual machines.
Model No.
7155
7165
Stock No.
7155.001
7165.001
Motor
3HP, 1Ph
5HP, 1Ph or 3Ph
Air Flow
2,100 CFM
3,600 CFM
Static Pressure
13 in. H2O
16 in. H2O
Inlet Diameter
8” or 4” x 3”
10” or 4” x 4”
Bag Diameter
19-5/8”
23-5/8”
Drum Capacity
60 Gallon
60 Gallon
Sound Rating
(Noise@10 ft)
75-85 dB
75-85 dB
Overall Size
67”x45”x91”
71”x51”x118”
Gross Weight
319 lbs
500 lbs
Upgrade to a
remote control system!
(Available for the 7155, 7165, 7150
& 7160)
Automatically turn the dust collector
on or off from anywhere in the shop.
Quick release lever lifts the lid from
the drum allowing it to be quickly
rolled out and dumped.
Handy site glass lets
you see when the
drum is getting full.
27
Stock Feeders
Joint-Buddy
APF0114
Ideal for Jointers
12” & Up
•
•
•
•
•
•
•
•
•
•
•
Save elbow grease trying to joint wide lumber with this
1/4HP, 4 speed feeder.
Patented spike roller grips the material firmly & passes it
with ease.
Arched support ensures rigidity & positive feeding
through the jointer’s cutterhead.
Self adjusting roller suspension allows for varying
thickness of material without having to make
adjustments.
96 lbs.
Universal applications.
Wide range of speeds to fit any
application.
Separation between first and second
wheels allow for cutter rotation.
Easy speed changes.
Fully adjustable stand with 10” vertical
travel and 18” horizontal travel.
APF0038: 1HP, 1Ph or 3Ph, 148 lbs.
APF0048: 1HP, 1Ph or 3Ph, 158 lbs.
Uni-Buddy 3
Uni-Buddy 4
3-Roller, 8-Speed
Universal Applications
4-Roller, 8-Speed
APF0038
Saw-Buddy
APF0024
Ideal for Table Saws
4 Speed
•
•
•
•
•
Designed specifically for table saw applications.
Build-in anti-kickback fingers provide additional safety.
Split wheels allow for 3” of blade clearance. This
means your material has wheel pressure at the exact
cut point thereby eliminating blow out or chipping
normally found when ripping thin material.
PU Roller 7”x3/4” x 3pcs.
1/2HP 1Ph or 3Ph, 159 lbs.
28
APF0048
The Ultimate Buddy
APF0300 & APF0400
•
•
•
•
Universal applications.
Fully variable feed range.
Advanced feeder mount has memory locks
which allow the feeder to be move and
returned without having to reposition.
Dual-Rollers allow for cutter or saw blade
clearance.
3/4HP, 3Ph only. 200 lbs.
Band Saw Buddy I
APF0120
Ideal for Band Saw over 24”
•
•
•
•
•
•
Super heavy-duty for maximum resaw
capability.
Microswitch at infeed senses wood and
automatically engages feed roller via a
pneumatic cylinder.
Emergency stop bar releases feed roller.
8” of travel on the massive roller fence.
Optional PU roller available.
Band Saw Buddy II
APF0017
Ideal for Band Saws 16” - 24”
•
•
•
•
•
Increase productivity & consistency.
Heavy spring automatically adjusts power head for
continuos re-sawing.
Will accept up to 4” of stacked feed wheels for
maximum re-saw capability.
Extra gearing allows for extra slow feeding down to
1-1/2” FPM.
Band Saw Buddy III
APF0019
Ideal for Band Saws Over 24”
•
•
•
Included 8” high steel roller fence greatly
minimizes friction.
Will accept up to 8” of stacked feed wheels for
large timber re-sawing.
1/2HP 1Ph OR 3Ph, 239 lbs.
29
For more in f orma tion a b o u t O l iv e r Ma c h in e r y p r o d u c t s ,
or t o f in d a n a u t h o r iz e d d e a l e r n e a r e s t y o u ,
v isit u s on lin e a t www.o l iv e r ma c h in e r y .n e t
or ca ll t o l l f r e e 8 0 0 -5 5 9 -5 0 6 5
ph: 253-867-0334 | f a x: 25 3 -8 6 7 -0 3 8 7 | in f o @o l iv e r ma c h in e r y .n e t
Ol iver Ma ch in ery 6 9 0 2 S . 1 9 4 t h S t ., Ke n t , WA 9 8 0 3 2
All efforts have been made to ensure that the information in this catalog is accurate. However Oliver Machinery does not
guarantee the accuracy of this information and reserves the right to change information in this catalog without notification.
V1
30

A TrAdiTion of innovATionTM

Transcription

Similar documents

Make CNI Your First Choice For Replacement Chassis Or New

Two New Benchtop Planers

Bridgeport CNC V2XT

T-REX Manual - RC Helitechnics

Technical Brochure

VISIT POWERMATIC.COM FOR MORE DETAILS

visit powermatic.com for more details

COMMERCIAL BOOTHS

Versamatic™ - Windsor Vacuums

Maytag® Commercial On-Premises Drying Tumblers - Mac-Gray