Central-Snap Condition Details

Central-Snap
Condition Details
Central-Snap
Vertical 1¾”
Standing Seam Roof Panel
Installation is a Snap with Central-Snap from
Central States offers a vertical 1¾” snap-lock standing seam panel system that is sturdy and
fire resistant, making it ideal for architectural and commercial applications. Its Galvalume
substrate offers two to four times the corrosion resistance of galvanized steel.
Comprehensive condition details are available and come attached to each order. Central
States also carries an extensive line of standing seam trims and accessories to complement this
panel.
Standing Seam Roofing Features:
■ Subtle striations between ribs on 16” and wider panels reduce the appearance of oil-canning.
■ Available in 24 gauge in 17 standard colors in the Kynar® (polyvinylidene flouride) coating
system.
■ Tested in accordance with UL580 & ASTM E1592.
■ Meets UL 90 wind uplift requirement for all panel widths offered.
■ Should be installed over solid substrates but can be installed over open framing depending upon
the panel width and support member spans.
■ Available with a 1-1/8” notch at one or both ends of each panel for the ease of turning under;
reducing installation labor and costs.
■ Factory applied hot melt sealant is standard.
■ Snap-together panel, no field seaming required.
■ Recommended minimum slope of 3:12.
August 2012
CENTRAL - SNAP
GABLE DETAIL
CENTRAL-SNAP PANEL
FIELD BEND PANEL
UP 1 1/2"
FIXED CLIP
J-CLOSURE
30# FELT
TURNED
DOWN WALL
GABLE FLASHING
3/16" X 7/8"
TAPE SEALANT
#10 X 1"
PANCAKE HEAD
WOOD SCREW
GABLE/RAKE
CONDITION
CLEAT
FLASHING COMPONENTS
2”
5”
1½”
1¾”
¾”
4”
J-CLOSURE (CSLJC)
¾”
GABLE FLASHING (CSLGA)
CLEAT (CSLTC)
CENTRAL - SNAP
ALTERNATE GABLE DETAIL
CENTRAL-SNAP PANEL
FIXED CLIP
STARTER FLASHING
SEALANT
30# FELT
TURNED
DOWN WALL
EAVE FLASHING
3/16" X 7/8"
TAPE SEALANT
#10 X 1"
PANCAKE HEAD
WOOD SCREW
CLEAT
GABLE/RAKE
CONDITION
FLASHING COMPONENTS
418”
¾”
4”
15°
1”
¾”
3”
STARTER FLASHING (CSLST)
¾”
ALT GABLE FLASHING (CSLAGA)
CLEAT (CSLTC)
CENTRAL - SNAP
ENDWALL DETAIL
COUNTER FLASHING
ZEE CLOSURE
SEALANT
POP RIVET
ENDWALL FLASHING
3/16" X 7/8"
TAPE SEALANT
CENTRAL-SNAP PANEL
LOW EAVE
CONDITION
3/16" X 7/8"
TAPE SEALANT
30# FELT
TURN UP
WALL
#10 X 1"
PANCAKE HEAD
WOOD SCREW
FLASHING COMPONENTS
6”
½”
1”
8”
1¾”
1”
ZEE CLOSURE (CSLZEE)
4”
½”
¾”
ENDWALL FLASHING (CSLEW)
COUNTER FLASHING (CSLCF)
CENTRAL - SNAP
SIDEWALL DETAIL
COUNTER FLASHING
FIELD BEND PANEL
UP 1 1/2"
J-CLOSURE
RAKE FLASHING
CENTRAL-SNAP PANEL
FIXED CLIP
SIDEWALL
CONDITION
3/16" X 7/8"
TAPE SEALANT
#10 X 1"
PANCAKE HEAD
WOOD SCREW
30# FELT
TURNED
UP WALL
FLASHING COMPONENTS
½”
1”
4”
4”
½”
2”
1¾”
¾”
4”
1”
COUNTER FLASHING (CSLCF)
1½”
RAKE FLASHING (CSLRA)
J-CLOSURE (CSLJC)
CENTRAL - SNAP
GUTTER DETAIL
CENTRAL-SNAP PANEL
1 5/8"
APPLY 3/8" BEAD OF BUTYL
SEALANT AT BOTH SIDES AND
TOP OF MALE RIB BEFORE
INSTALLING NEXT PANEL
ROOF CLEAT
FIELD BEND
1" TAB
UNDER PANEL
SECTION "A"-"A"
GUTTER STRAP
14" LONG
8"
END PLUG
OR FILL SEAM
WITH SEALANT
GUTTER STRAP
3/16" X 7/8"
TAPE SEALANT
FIXED CLIP
"A"
#10 X 1"
PANCAKE HEAD
WOOD SCREW
"A"
3/16" X 7/8"
TAPE SEALANT
#10 X 1"
PANCAKE HEAD
WOOD SCREW
12" ON CENTER
OPTIONAL GUTTER EAVE TRIM.
WHERE REQUIRED TO COVER
INSIDE COLOR OF GUTTER.
30# FELT
TURNED
DOWN WALL
GUTTER
GUTTER
CONDITION
FLASHING COMPONENTS
¾”
158”
6”
58”
1” 58” ½”
GUTTER STRAP (CSLGS)
pitch
5½”
5½”
4½”
2”
90°
90°
GUTTER (CSLGU)
½”
GUTTER EAVE FLASHING (CSLGET)
1¼”
¾”
1¼”
ROOF CLEAT (CSLRCL)
CENTRAL - SNAP
EAVE DETAIL
CENTRAL-SNAP PANEL
APPLY 3/8" BEAD OF BUTYL
SEALANT AT BOTH SIDES AND
TOP OF MALE RIB BEFORE
INSTALLING NEXT PANEL
X
6" MA
ROOF CLEAT
FIELD BEND
1" TAB
UNDER PANEL
END PLUG
OR FILL SEAM
WITH SEALANT
30# FELT
TURNED
DOWN WALL
FIXED CLIP
3/16" X 7/8"
TAPE SEALANT
EAVE FLASHING
#10 X 1"
PANCAKE HEAD
WOOD SCREW
12" ON CENTER
#10 X 1"
PANCAKE HEAD
WOOD SCREW
12" ON CENTER
CLEAT
#10 X 1"
PANCAKE HEAD
WOOD SCREW
LOW EAVE
CONDITION
FLASHING COMPONENTS
1¼”
¾”
1¼”
ROOF CLEAT (CSLRCL)
EAVE FLASHING (CSLE)
CLEAT (CSLTC)
CENTRAL - SNAP
VALLEY DETAIL
FIXED CLIP
FIXED CLIP
CENTRAL-SNAP PANEL
CENTRAL-SNAP PANEL
IMUM
" MIN
4 1/2
ROOF CLEAT
ROOF CLEAT
FIELD BEND
1" TAB
UNDER PANEL
FIELD BEND
1" TAB
UNDER PANEL
VALLEY FLASHING
#10 X 1"
PANCAKE HEAD
WOOD SCREW
3/16" X 7/8"
TAPE SEALANT
3/16" X 7/8"
TAPE SEALANT
30# FELT
#10 X 1"
PANCAKE HEAD
WOOD SCREW
30# FELT
VALLEY
CONDITION
FLASHING COMPONENTS
¾”
2”
11”
11”
2”
VALLEY FLASHING (CSLVAL)
1¼”
¾”
¾”
1¼”
ROOF CLEAT (CSLRCL)
CENTRAL - SNAP
HIP / RIDGE DETAIL
HIP/RIDGE
FLASHING
8"
S
VARIE
ZEE CLOSURE
SEALANT
AT EACH
END
POP RIVET
12" ON CENTER
3/16" X 7/8"
TAPE SEALANT
CENTRAL-SNAP PANEL
1"
3/16" X 7/8"
TAPE SEALANT
#10 X 1"
PANCAKE HEAD
WOOD SCREW
30# FELT
(4 FOR 18" PANEL)
(3 FOR 16" PANEL)
RIDGE
CONDITION
HIP
CONDITION
FLASHING COMPONENTS
8”
8”
HIP/RIDGE FLASHING (CSLHR)
¾”
¾”
1”
1¾”
1”
ZEE CLOSURE (CSLZEE)
CENTRAL - SNAP
PITCH TRANSITION DETAIL
FIXED CLIP
CENTRAL-SNAP PANEL
6"
X
MA
#10 X 1"
PANCAKE HEAD
WOOD SCREW
END PLUG
OR FILL SEAM
WITH SEALANT
ZEE CLOSURE
3/16" X 7/8"
TAPE SEALANT
ROOF CLEAT
TRANSITION FLASHING
POP RIVET
FIELD BEND
1" TAB
UNDER PANEL
3/16" X 7/8"
TAPE SEALANT
CENTRAL-SNAP PANEL
FIXED CLIP
30# FELT
3/16" X 7/8"
TAPE SEALANT
#10 X 1"
PANCAKE HEAD
WOOD SCREW
PITCH TRANSITION
CONDITION
FLASHING COMPONENTS
¾”
418”
6”
TRANSITION FLASHING (CSLTR)
¾”
1”
1¾”
1”
ZEE CLOSURE (CSLZEE)
1¼”
¾”
1¼”
ROOF CLEAT (CSLRCL)
CENTRAL - SNAP
PANEL NOTCH
LAP SEAL
APPLY 3/8" BEAD OF
BUTYL SEALANT ON BOTH
SIDES OF MALE RIB
3/4
"
CENTRAL SNAP
PANEL
MALE RIB
OPTIONAL FACTORY
PANEL NOTCH.
TYPICAL AT MALE
AND FEMALE RIBS.
11
/8"
"
1/8
ROOF CLEAT
PANEL HEM
CENTRAL SNAP
PANEL
FIELD BEND 1" TAB
WITH HEMMING TOOL
3/8
RE " MIN
CL COM .
EA M
RA EN
NC DE
D
E
CENTRAL - SNAP
UL 90 CLIP
TUBE SEALANT
Part Code: CSLCLP
Part Code: GEOC
GEOG
GEOW
FASTENER- METAL
FASTENER- WOOD
Part Code: 12FASTENER
Part Code: CSLWFAST
#12-10 X 1 Pan Head
TAPE SEALANT
Part Code: BTR
3/16" x 7/8"x40'
#10-9 X 1 Wood
POP RIVETS
Part Code: POP(color)
1/8" Pop Rivet
302 Jane Place
Lowell, AR 72745
800-356-2733
2051 Tryon Road
Michigan City, IN 46360
800-638-2565
660 Grigsby Way
Cedar Hill, TX 75104
800-210-8305
3402 Industrial Drive
Jasper, AL 35501
866-270-6608
751 Piedmont Triad West Dr.
Mount Airy, NC 27030
877-813-2111