pages 1-16

Transcription

pages 1-16

T H E FUR N I T UR E
DIRECTORY
20 08
(S IXTH EDITION)
MORRIS CONTRACT FURNITURE
BBC WHITE CITY: PHOTOGRAPH BY CHARLIE BIRCHMORE / DESIGN BY TILNEY SHANE
MESON DEL LAGO: PHOTOGRAPH BY PAUL ZANRE / DESIGN BY COBB AN LIRONI WEDDELL & THOMPSON
CARGO, LEITH
TURNBERRY GOLF CLUB / SPA
BRUNEL UNIVERSITY
MORRIS CONTRACT FURNITURE
Established in 1954, Morris Contract Furniture is a versatile and dependable manufacturer of
hard wearing, hard working furniture. This is the sixth edition of the Furniture Directory, an
indispensable portfolio for architects, designers, restaurateurs, publicans and anyone who needs
to specify high quality contract furniture for demanding environments. The new Directory has
been refined, redesigned and packed full of fresh ideas and innovative products.
As well as this expansive selection of furniture, Morris continues to offer a bespoke design and
manufacturing facility in metal and in wood. From the sketchiest initial concept to a fully
finished product, over fifty years of experience and expertise go into developing and ultimately
realising your ideas. For more information on this service, check out the ‘Bespoke’ section of
the Directory on the following pages.
LITTLE SILVER COUNTRY HOTEL
P IVO, ABERDEEN
BAR ICI
BESPOKE FURNITURE
With over fifty years of industry experience and a fully equipped manufacturing facility at our base in
Campsie Glen, Morris can produce high quality bespoke furniture to order. Although there are hundreds
of different products available as standard, we are aware that some projects require furniture which is
custom-made for the job. Here are some examples of the projects and products we have worked on
recently.
AMF BOWLING
GIA Architects were commissioned to design floor-fixed seating units and ball racks for use in a new chain
of bowling alleys across the UK. Given the demanding nature of the environment in which they were
intended to be used, structural solidity was imperative from the outset. GIA sent their initial drawings to
Morris, outlining the look and functionality required, as well as an indication of the budget we had to work
with. Morris re-engineered the furniture from the
drawings and suggested materials which would meet
both cost and structural requirements. GIA then
agreed to the revised designs in principle and Morris
prototyped the first unit. After delivery of the
prototype, we met with the GIA and the customerAMF Bowling- to discuss modifications to the design.
After some minor alterations based on this practical
feedback, the order was placed and the job went live.
The whole process, from the initial drawings to the
finished article, took nine weeks.
AMF BOWLING, STIRLING
Without the manufacturing facilities we have on site, projects like
the one for AMF Bowling would not have been possible. With all
our equipment, staff and expertise under one roof we are able to
control every aspect of our factory production and add flexibility
to our prototyping and production methods. There really is no
substitute for a hands-on approach when a job needs done
rigorously and on time.
PERSE SCHOOL
Designer Paul Waight wanted a particular look and functionality in the furniture for an interior he was
working on, so he came to us at Morris to develop the project. We agreed a verbal brief according to his
ideas and put together some sketches of our proposals. After various adjustments to the initial sketches
we made up rendered 3D CAD drawings of the furniture.
When the drawings were considered, tweaked and then agreed we received a letter of intent prior to
producing samples of each piece of furniture. After these samples were manufactured we had a further
meeting with Paul and his customers, Perse School in Cambridge, and the furniture was approved. A
formal order was then placed and the project was successfully completed and delivered.
PERSE SCHOOL, C AMBRIDGE
RECENT PRODUCTS:
BOOTH SEATING (PERSE)
FISH CHAIRS
CHAMPAGNE TABLE
CONTENTS
EGG
CITY NIGHTCLUB
COLLECTION
PAGE
NEW METAL
LO FI
LINEAR
ORA
GLAM
CAFE ONE
CAFE TWO
PLASTIC
PLYFORM
WOOD ONE
WOOD TWO
TABLES
SOFAS TUBS AND CUBES
PUB CLUB AND DISCO
LLOYD LOOM
ALFRESCO
WAITING PLACES
BANQUET
BAROQUE
ALBA / SPIRAL
OCTAVIAN
WICKHAM VAN EYCK
20TH CENTURY CLASSICS
5
11
19
23
27
31
43
61
89
103
139
173
203
217
223
227
243
249
253
259
263
265
267
BBC, WHITE CITY
FIREFLY
JOHNSON & JOHNSON
ENIGMA
NEW METAL
6
7
8
9
10
www.morriscontractfurniture .co.uk
BSMIRA01
470
CHMIRA01
400
810
470
460
440
M IR A
THE ‘MIRA’ CHAIR, STOOLS AND BENCH ARE MANUFACTURED
WITH A HARD WEARING MILD STEEL FRAME WHICH CAN BE
POWDER COATED IN A WIDE VARIETY OF COLOURS FOR A
DURABLE FINISH. THEY CAN BE UPHOLSTERED IN ANY
CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
HSMIRA01
895
460
560
LSMIRA01
750
375
375
HSMIRA02
750
375
6
900
375
405
N EW M ETA L
SERIES B
HIGH STOOL
1060
760
510
430
UPHOLSTERED SEAT PAD
S E R IES B
BY MEDESSIN
FULLY UPHOLSTERED FACE
THESE ARE THE FIRST PIECES OF THE SERIES B
COLLECTION, THE SECOND RANGE OF
FURNITURE DESIGNED BY MEDESSIN
EXCLUSIVELY FOR MORRIS. THE CHAIR AND
HIGH STOOL HAVE A DURABLE PLY SHELL
WHICH CAN BE STAINED TO SPECIFICATION
AND UPHOLSTERED AS ILLUSTRATED. THEY
HAVE A HARD WEARING STEEL FRAME WHICH
CAN BE ERP COATED IN A WIDE CHOICE OF
COLOURS.
SERIES B
CHAIR
730
445
510
430
FULLY UPHOLSTERED FACE
7
TAOMAR02
740
TOP SIZE TO SPEC.
TAOMAR01
740
TOP SIZE TO SPEC.
OMA R
CTOMAR01
THE ‘OMAR’ TABLES ARE MANUFACTURED WITH A HARD WEARING MILD
STEEL FRAME WHICH CAN BE POWDER COATED IN A WIDE CHOICE OF
COLOURS FOR A DURABLE FINISH. THERE IS A SELECTION OF TABLE TOPS
SHOWN ON THE BACK PAGE OF THE DIRECTORY.
POOMAR02
1120
TOP SIZE TO SPEC.
POOMAR01
1120
TOP SIZE TO SPEC.
8
490
TOP SIZE TO SPEC.
N EW M ETA L
HSOMAR02
775
375
355
HSOMAR01
940
775
490
355
OMAR
THE ‘OMAR’ CHAIR AND STOOLS ARE MANUFACTURED WITH A
HARD WEARING MILD STEEL FRAME WHICH CAN BE POWDER
COATED IN A WIDE VARIETY OF COLOURS FOR A DURABLE FINISH.
THEY CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD
FABRIC, VINYL OR LEATHER.
CHOMAR01
770
495
560
420
LSOMAR01
470
365
365
9
LCROC01
790
425
570
510
CHROC01
830
480
545
490
SA N ROCCO
THE ‘SAN ROCCO’ CHAIRS AND STOOLS ARE MANUFACTURED
WITH A HARD WEARING MILD STEEL FRAME WHICH CAN BE
POWDER COATED IN A WIDE VARIETY OF COLOURS FOR A
DURABLE FINISH. THEY CAN BE UPHOLSTERED IN ANY
HSROC01
1110
760
490
HSROC02
765
375
375
LSROC01
465
385
10
385
410
LO FI
BY MEDESSIN
EXCLUSIVE TO MORRIS
12
13
14
15
16
17
18
PHOTOGRAPH BY MARK ENSTONE / DESIGN BY LIEF
LO-FI
MINI SOFA
540
425
600
1050
THE LO FI MINI SOFA IS MANUFACTURED WITH AN EXTREMELY HARD WEARING
STEEL FRAME WHICH CAN BE POWDER COATED IN A WIDE VARIETY OF COLOURS
FOR A DURABLE FINISH. THE DEEP CUSHIONED BODY OF THE SOFA CAN BE
UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
LO-FI
MAXI SOFA
650
425
750
790/
1540/
2040
THE LO FI MAXI SOFA IS MANUFACTURED WITH AN EXTREMELY HARD WEARING STEEL
FRAME WHICH CAN BE POWDER COATED IN A WIDE VARIETY OF COLOURS FOR A
DURABLE FINISH. THE DEEP CUSHIONED BODY AND BACK OF THE SOFA CAN BE
12
765
465
850
900
LO FI
BY MEDESSIN
LO-FI MAXI
CORNER UNIT
THE LO FI MAXI CORNER UNIT IS MANUFACTURED
WITH AN EXTREMELY HARD WEARING STEEL FRAME
WHICH CAN BE POWDER COATED IN A WIDE
VARIETY OF COLOURS FOR A DURABLE FINISH. THE
DEEP CUSHIONED BODY AND BACK OF THE UNIT
CAN BE UPHOLSTERED IN ANY CONTRACT
STANDARD FABRIC, VINYL OR LEATHER.
LO-FI
MAXI CHAIR
765
465
840
900
THE LO FI MAXI CHAIR IS MANUFACTURED WITH AN
EXTREMELY HARD WEARING STEEL FRAME WHICH CAN
BE POWDER COATED IN A WIDE VARIETY OF COLOURS
FOR A DURABLE FINISH. THE DEEP CUSHIONED BODY
AND BACK OF THE CHAIR CAN BE UPHOLSTERED IN
ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
LO-FI
BAR STOOL
LO-FI
LOW STOOL
340
425
340
760
400
400
THE LO FI BAR STOOL AND LOW STOOL ARE MANUFACTURED FROM EXTREMELY HARD WEARING STEEL WHICH CAN BE
POWDER COATED IN A WIDE VARIETY OF COLOURS FOR A DURABLE FINISH. THE DEEP-FILLED SEAT CUSHION IS BOTH
COMFORTABLE AND ROBUST, AND CAN BE UPHOLSTERED IN FABRIC, VINYL OR LEATHER.
13
LO-FI
LOW PAD
425
550
THE LO FI HIGH PAD AND LOW PAD ARE MANUFACTURED FROM EXTREMELY HARD WEARING STEEL WHICH CAN BE POWDER
COATED IN A WIDE VARIETY OF COLOURS FOR A DURABLE FINISH. THE DEEP-FILLED SEAT CUSHION IS BOTH COMFORTABLE AND
ROBUST, AND CAN BE UPHOLSTERED IN FABRIC, VINYL OR LEATHER. THE LOW PAD CAN BE USED WITH THE WALL MOUNTED BACK
PADS SHOWN OVERLEAF FOR ADDED COMFORT.
LO-FI
HIGH PAD
740
550
14
1050
1050
250
130
1050
LO FI
BY MEDESSIN
LO-FI
BACK PAD 01
LO-FI
BACK PAD 02
250
100
1050
WALL MOUNTED BACK
PAD 01 WITH LOW PAD
THE LO FI BACK PADS ARE DESIGNED TO BE USED WITH THE LOW PAD ON PAGE 4. THE BACK PAD IS ATTACHED TO THE WALL ABOVE
THE LOW PAD SEAT AND USED AS A FIXED BACKREST. ALTERNATIVELY, THE BACK PAD CAN BE WALL MOUNTED ON ITS OWN AND
USED AS A STANDING BUM REST, IDEAL FOR BUSY BARS AND NIGHTCLUBS. THE BACK PADS CAN BE UPHOLSTERED IN ANY
LO-FI
STEEL TRAY
130
120
1050
THE LO FI STEEL TRAY HAS ALL THE FUNCTIONALITY OF THE BACK PAD, BUT CAN ALSO BE USED TO HOLD
GLASSES OR BOTTLES INSIDE. THE TRAY HAS A PERFORATED INTERNAL SHELF TO PLACE DRINKS ON, A
REMOVABLE DRAINER AND A STEEL TRAY FOR EASY CLEANING. THE FACE CAN BE UPHOLSTERED IN ANY
LO FI
SINGLE STOOL
450
340
400
THE LO FI SINGLE STOOL IS MANUFACTURED FROM EXTREMELY HARD WEARING STEEL WHICH CAN BE POWDER COATED
IN A WIDE VARIETY OF COLOURS FOR A DURABLE FINISH. THE SEAT SHOWN IS 36 MILLIMETRE VENEERED RUSSIAN BIRCH
AND THE STOOL IS ALSO AVAILABLE WITH A LAMINATED MDF SEAT.
15
LO-FI
DINING TABLE
760
700
700/
1350/
2400
LO-FI
BENCH
450
340
1000
THE LO FI DINING TABLE AND BENCH ARE MADE FROM
EXTREMELY HARD WEARING STEEL WHICH CAN BE
POWDER COATED IN A WIDE VARIETY OF COLOURS FOR
A DURABLE FINISH. THE TABLE TOP AND SEAT SHOWN IN
THE PHOTOGRAPH ARE 36 MILLIMETRE VENEERED
RUSSIAN BIRCH. FOR A LESS EXPENSIVE OPTION THE TOP
CAN BE MANUFACTURED IN 36 MILLIMETRE MDF. THE
FULL RANGE OF TABLE TOP OPTIONS IS SHOWN ON THE
BACK PAGE OF THE DIRECTORY.
THE 2 SEAT TABLE IS DESIGNED TO BE USED WITH THE
LOW STOOL OR SINGLE STOOL. THE 4 AND 6 SEAT TABLES ARE DESIGNED TO BE USED WITH THE LOW STOOL,
SINGLE STOOL, BENCH, LOW PAD OR MINI SOFA.
16
760
TOP SIZE: 740 x 700 mm
LO FI
BY MEDESSIN
LO-FI
CAFE TABLE
THE LO FI CAFE TABLE IS
MANUFACTURED FROM EXTREMELY
HARD WEARING STEEL WHICH CAN BE
POWDER COATED IN A WIDE VARIETY
OF COLOURS FOR A DURABLE FINISH.
THE TABLE TOP SHOWN IN THE
PHOTOGRAPH IS 36 MILLIMETRE
VENEERED RUSSIAN BIRCH. THE FULL
RANGE OF TABLE TOP OPTIONS IS
SHOWN ON THE BACK PAGE OF THE
DIRECTORY.
THE LO FI POSER TABLE IS
MANUFACTURED FROM EXTREMELY
HARD WEARING STEEL WHICH CAN BE
POWDER COATED IN A WIDE VARIETY
OF COLOURS FOR A DURABLE FINISH.
THE TABLE CAN BE SUPPLIED WITH
STEEL HOOKS WITH WHICH TO HANG
BAGS OR COATS. THE TABLE TOP
SHOWN IN THE PHOTOGRAPH IS 36
MILLIMETRE VENEERED RUSSIAN BIRCH.
THE FULL RANGE OF TABLE TOP
OPTIONS IS SHOWN ON THE BACK
PAGE OF THE DIRECTORY.
LO-FI
POSER TABLE
1200
17
LO FI
COFFEE TABLE 01
180
LO FI
COFFEE TABLE 02
200
THE LO FI COFFEE TABLES ARE MANUFACTURED FROM EXTREMELY HARD WEARING STEEL WHICH CAN BE POWDER COATED IN A WIDE
VARIETY OF COLOURS FOR A DURABLE FINISH. THE TABLE TOPS SHOWN ARE 36 MILLIMETRE VENEERED RUSSIAN BIRCH, THE FULL
RANGE OF TABLE TOP OPTIONS ARE SHOWN ON THE BACK PAGE OF THE DIRECTORY.
LO FI
COFFEE TABLE 03
200
LO FI
COFFEE TABLE 04
300
18
LINEAR
BY ROB M ULHOLLAND
20
20
21
21
21
21
21
22
PHOTOGRAPH BY PAUL ZANRE / DESIGN BY C M DESIGN CONSULTA NTS
22
CHLINR03
895
460
560
STACKING CHAIR
HSLINR02
1125
750
505
THE CHLINR03 CHAIR AND HSLINR02 HIGH STOOL ARE
MANUFACTURED WITH A HARD WEARING MILD STEEL
FRAME WHICH CAN BE POWDER COATED IN ONE OF A
WIDE VARIETY OF COLOURS FOR A DURABLE FINISH.
THE VENEERED MULTILAYER PLY BACK IS AVAILABLE IN
NATURAL BEECH OR STAINED TO SPECIFICATION, AND
THE CUSHIONED SEAT CAN BE UPHOLSTERED IN ANY
BOTH THE CHAIR AND THE HIGH STOOL CAN BE
PRODUCED WITH A ROLLED STEEL BACK AS AN
ALTERNATIVE TO THE VENEERED PLY OPTION. THE STEEL
BACK CAN ALSO BE LASER CUT TO INCORPORATE THE
STANDARD ‘LINEAR’ DESIGN AS SHOWN ON THE
CHLINR01 CHAIR OVERLEAF, OR A CUSTOMISED DESIGN
SUCH AS A COMPANY LOGO.
20
405
375
895
465
410
465
555
410
LIN EA R
CHLINR01
895
555
BY ROB M ULHOLLAND
CHLINR02
CHLINR04
890
440
545
415
STACKING CHAIR
THE ‘LINEAR’ CHAIRS ARE MANUFACTURED WITH A HARD
WEARING MILD STEEL FRAME WHICH CAN BE POWDER COATED
IN ONE OF A WIDE VARIETY OF COLOURS FOR A DURABLE FINISH.
THE ROLLED STEEL BACK CAN BE LASER CUT TO INCORPORATE
THE STANDARD ‘LINEAR’ DESIGN OR A CUSTOMISED DESIGN SUCH
AS A COMPANY LOGO. THE CHLINR01 AND CHLINR02 CHAIRS
HAVE A CUSHIONED SEAT WHICH CAN BE UPHOLSTERED IN ANY
THE HSLINR01 HIGH STOOL AND LSLINR01 LOW STOOL ARE ALSO
MANUFACTURED WITH A MILD STEEL FRAME WHICH CAN BE
POWDER COATED IN A WIDE VARIETY OF COLOURS. THE
CUSHIONED SEAT CAN BE UPHOLSTERED IN ANY CONTRACT
LSLINR01
445
360
360
HSLINR01
750
375
375
21
TALINR01
720
Max. top 1200 x 800
or 1000 diameter
THE TALINR01 TABLE IS MANUFACTURED FROM HARD WEARING MILD STEEL WHICH CAN BE POWDER COATED IN A WIDE CHOICE
OF COLOURS FOR A DURABLE FINISH. THERE IS A WIDE SELECTION OF TABLE TOP OPTIONS AVAILABLE, AS DETAILED ON THE BACK
THE SOLINR01 SOFA IS ALSO MANUFACTURED FROM HARD WEARING MILD STEEL AND CAN BE POWDER COATED IN A WIDE
CHOICE OF COLOURS OR CHROMED. THE SOFA IS AVAILABLE IN THE STANDARD TWO-SEAT SIZE OR A LARGER VERSION WHICH
SEATS THREE. IT CAN BE UPHOLSTERED IN ANY STANDARD FABRIC, VINYL OR LEATHER.
SOLINR01
865
385
765
22
1200
ORA
B Y DAVI D B ROW N
24
24
25
25
25
25
26
26
26
CHORA02
755
460
545
THE CHORA02 CHAIR HAS A GENEROUSLY
PROPORTIONED FRAME CONSTRUCTED FROM
HARD WEARING TUBULAR STEEL, WHICH CAN BE
CHROMED OR ERP COATED IN ANY ONE OF A
WIDE VARIETY OF COLOURS. THE BEECH
VENEERED PLYFORM BACK CAN BE SUPPLIED IN
ITS NATURAL COLOUR WITH A PROTECTIVE
LACQUER COATING OR STAINED TO
SPECIFICATION. THE CUSHIONED SEAT CAN BE
UPHOLSTERED IN ANY CONTRACT STANDARD
THE CHORA04 CHAIR HAS A GENEROUSLY
PROPORTIONED FRAME CONSTRUCTED FROM
HARD WEARING TUBULAR STEEL, WHICH CAN BE
CHROMED OR ERP COATED IN ANY ONE OF A
WIDE VARIETY OF COLOURS. THE SEAT AND BACK
ARE CUSHIONED FOR MAXIMUM COMFORT AND
CAN BE UPHOLSTERED IN ANY CONTRACT
CHORA04
755
460
545
24
530
530
770
460
500
450
ORA
B Y DAV I D B ROW N
CHORA03
UPHOLSTERED SEAT AND BACK
CHORA01
770
460
500
450
STACKING CHAIR
THE CHORA01 CHAIR IS MANUFACTURED FROM HARD WEARING TUBULAR STEEL, WHICH CAN BE CHROMED OR ERP
COATED IN ANY ONE OF A WIDE VARIETY OF COLOURS. THE BEECH VENEERED PLYFORM BACK CAN BE SUPPLIED IN ITS
NATURAL COLOUR WITH A LACQUER COATING OR STAINED TO SPECIFICATION. THE CUSHIONED SEAT CAN BE
HSORA02
1050
795
540
465
THE HSORA02 HIGH STOOL IS CONSTRUCTED FROM
HARD WEARING TUBULAR STEEL WHICH CAN BE
CHROMED OR ERP COATED IN ANY ONE OF A WIDE
VARIETY OF COLOURS. THE BEECH VENEERED
PLYFORM BACK CAN BE SUPPLIED IN ITS NATURAL
COLOUR WITH A LACQUER COATING OR STAINED TO
SPECIFICATION. THE CUSHIONED SEAT CAN BE
HSORA03
1050
795
540
465
UPHOLSTERED SEAT AND BACK
25
HSORA01
760
360
LSORA01
465
340
340
THE HSORA01 HIGH STOOL AND LSORA01 LOW STOOL ARE CONSTRUCTED FROM HARD WEARING TUBULAR MILD STEEL,
WHICH CAN BE SUPPLIED IN A CHROME OR ERP COATED FINISH. THE CUSHIONED SEAT PAD CAN BE UPHOLSTERED IN ANY
THE TAORA01 TABLE IS CONSTRUCTED
FROM HARD WEARING TUBULAR MILD
STEEL, WHICH CAN BE SUPPLIED IN A
CHROME OR ERP COATED FINISH.
THERE IS A COMPREHENSIVE SELECTION
OF TABLE TOPS TO CHOOSE FROM ON
THE BACK PAGE OF THE DIRECTORY.
TAORA01
720
MAX.TOP SIZE 1800 x 900
OR 1500 mm diameter
26
360
GLAM
BY MORRIS
28
28
29
29
30
30
HSGLAM07
960
775
500
410
HSGLAM08
775
500
LSGLAM08
450
385
THE HSGLAM07 AND HSGLAM08 HIGH STOOLS, LSGLAM08 LOW
STOOL AND TAGLAM05 TABLE HAVE A HARD WEARING STEEL TUBE
FRAME ON A SPUN STEEL COVERED BASE. THE FRAME CAN BE
CHROMED OR ERP COATED AND THE BASE ERP COATED ONLY. THE
STOOLS HAVE A COMFORTABLE FOAM CUSHIONED SEAT WHICH CAN
BE UPHOLSTERED IN A WIDE RANGE OF FABRICS, LEATHERS AND
VINYLS. THE TABLE BASE CAN BE SUPPLIED WITH ONE OF THE MANY
TABLE TOPS ILLUSTRATED ON THE BACK PAGE OF THE DIRECTORY.
710
MAX.TOP SIZE 700 mm diam.
CHGLAM02
730
457
572
HSGLAM04
940
762
580
550
385
TAGLAM05
THE CHGLAM02 CHAIR AND HSGLAM04 HIGH STOOL HAVE A
HARD WEARING STEEL TUBE FRAME WHICH CAN BE
CHROMED OR ERP COATED. THE STOOLS HAVE A
COMFORTABLE FOAM CUSHIONED SEAT WHICH CAN BE
UPHOLSTERED IN A WIDE RANGE OF FABRICS, LEATHERS AND
VINYLS.
28
410
559
457
485
540
GLA M
610
BY MORRIS
LSGLAM01
HSGLAM01
915
762
485
540
LSGLAM02
457
407
407
THE HSGLAM01 AND HSGLAM02 HIGH STOOLS AND THE LSGLAM01 AND
LSGLAM02 LOW STOOLS HAVE A HARD WEARING STEEL TUBE FRAME
WHICH CAN BE CHROMED OR ERP COATED. THE STOOLS HAVE A
COMFORTABLE FOAM CUSHIONED SEAT WHICH CAN BE UPHOLSTERED
IN A WIDE RANGE OF FABRICS, LEATHERS AND VINYLS.
HSGLAM02
915
762
485
540
THE HSGLAM03 HIGH STOOL AND THE LSGLAM03
LOW STOOL HAVE A HARD WEARING STEEL TUBE
FRAME WHICH CAN BE CHROMED OR ERP COATED.
THE STOOLS HAVE A COMFORTABLE FOAM
CUSHIONED SEAT WHICH CAN BE UPHOLSTERED IN
A WIDE RANGE OF FABRICS, LEATHERS AND VINYLS.
HSGLAM03
762
394
420
LSGLAM03
457
407
407
29
HSGLAM05
957
762
435
415
LSGLAM05
457
415
415
LSGLAM04
640
457
435
TAGLAM03
710
MAX.TOP SIZE 900 x 600 mm
415
POGLAM03
1090
THE HSGLAM05 HIGH STOOL, LSGLAM04 AND LSGLAM05 LOW STOOLS, POGLAM03 POSEUR TABLE AND TAGLAM03 TABLE HAVE A
HARD WEARING STEEL TUBE FRAME WHICH CAN BE CHROMED OR ERP COATED. THE STOOLS HAVE A COMFORTABLE FOAM
CUSHIONED SEAT WHICH CAN BE UPHOLSTERED IN A WIDE RANGE OF FABRICS, LEATHERS AND VINYLS. THE TABLE BASES CAN
BE SUPPLIED WITH ONE OF THE MANY TABLE TOPS ILLUSTRATED ON THE BACK PAGE OF THE DIRECTORY.
30
C AFE ONE
BY MORRIS
32
33
34
- 35
36
37
38
- 39
40
- 41
42
PHOTOGRAPH BY JIM ELLAM / DESIGN BY KEANE DESIGN
CHEO05
(PLY SEAT)
CHEO05
(UPHOLSTERED)
785
785
480
450
480
450
400
400
HSEO02
990
740
445
450
SPICE
THE ‘SPICE’ CHAIR AND HIGH STOOL ARE MANUFACTURED FROM HARD WEARING MILD STEEL
WHICH CAN BE CHROMED OR ERP COATED IN A WIDE RANGE OF COLOURS. THE BEECH
VENEERED PLYFORM SEAT CAN BE STAINED TO SPECIFICATION OR UPHOLSTERED IN FABRIC,
VINYL OR LEATHER.
CH2002
CH2005
860
860
470
590
450
475
550
440
STACKING CHAIR
HS2002
1100
775
530
410
LOOP
32
THE ‘LOOP’ CHAIRS AND HIGH STOOL ARE MANUFACTURED FROM HARD WEARING MILD
STEEL WHICH CAN BE CHROMED OR ERP COATED IN A WIDE RANGE OF COLOURS. THE
BEECH VENEERED PLYFORM BACK CAN BE STAINED TO SPECIFICATION AND THE
COMFORTABLE FOAM SEAT CAN BE UPHOLSTERED IN FABRIC, VINYL OR LEATHER. THE
CH2002 CHAIR HAS A STACKING RAIL WHICH ENABLES IT TO BE STACKED 8 HIGH WITHOUT
FRAME-TO-UPHOLSTERY CONTACT.
CHAD02
CHAD01
820
440
690
480
460
535
450
C A FE ONE
BY MORRIS
850
LSEO02
470
410
410
DINER
THE ‘DINER’ CHAIRS, STOOLS AND TABLE ARE MANUFACTURED FROM
HARD WEARING MILD STEEL WHICH CAN BE CHROMED OR ERP
COATED IN A WIDE RANGE OF COLOURS. THE CHAIRS AND STOOLS
CAN BE UPHOLSTERED IN FABRIC, VINYL OR LEATHER. A TOP FOR
THE TABLE CAN BE CHOSEN FROM THE SELECTION ON THE BACK
LSAD02
470
365
365
TAAD01
HSAD01
775
765
410
410
33
CHTIMA01
820
450
440
400
CHTIMA02
820
465
445
THE CHAIRS AND HIGH STOOLS IN THE ‘TIMA’ COLLECTION ARE
MANUFACTURED FROM HARD WEARING MILD STEEL WITH A SOLID
BEECH VENEERED SEAT AND BACK. THE FRAME CAN BE SUPPLIED IN
CHROME OR ANY STANDARD ERP FINISH. THEY ARE AVAILABLE WITH A
FOAM SEAT WHICH CAN BE UPHOLSTERED IN FABRIC, VINYL OR
LEATHER.
HSTIMA01
1100
762
440
HSTIMA03
1100
775
440
34
400
400
400
485
370
390
C A FE ONE
BY MORRIS
LSTIMA02
LSTIMA01
485
370
390
TIMA
THE LOW STOOLS IN THE ‘TIMA’ COLLECTION ARE MANUFACTURED FROM HARD WEARING MILD STEEL WITH A SOLID BEECH
VENEERED SEAT, WHICH CAN BE UPHOLSTERED IN FABRIC, VINYL OR LEATHER. THE FRAME CAN BE SUPPLIED IN CHROME OR ANY
STANDARD ERP FINISH. THE TABLE ALSO HAS A DURABLE MILD STEEL FRAME, AND THERE ARE A VARIETY OF TABLE TOP OPTIONS
INCLUDING A SELECTION OF VENEERS, LAMINATES AND OTHER FINISHES AS SHOWN ON THE BACK PAGE OF THE DIRECTORY.
TATIMA01
710
MAX.TOP SIZE (RECTANGULAR):
2400 x 1000 mm
MAX.TOP SIZE (SQUARE):
1500 x 1500 mm
MAX.TOP SIZE (ROUND):
1500 mm diameter
35
CHEO08
CHEO02
930
840
470
520
410
STACKING CHAIR
410
STACKING CHAIR
CHEO04
845
470
480
455
STACKING CHAIR
THESE CHAIRS ARE MANUFACTURED FROM HARD WEARING MILD STEEL WHICH CAN BE CHROMED OR ERP COATED IN A WIDE
RANGE OF COLOURS. THEY HAVE COMFORTABLE FOAM SEATS WHICH CAN BE UPHOLSTERED IN FABRIC, VINYL OR LEATHER.
CHEO03
800
470
480
455
STACKING CHAIR
CHEO09
860
470
550
450
STACKING CHAIR
36
470
540
840
470
470
550
525
STACKING CHAIR
445
STACKING CHAIR
C A FE ONE
CHEO11
750
580
BY MORRIS
ACEO02
THESE CHAIRS AND HIGH STOOL ARE MANUFACTURED FROM HARD WEARING MILD STEEL WHICH CAN BE CHROMED OR ERP
COATED IN A WIDE RANGE OF COLOURS (WITH THE EXCEPTION OF THE CHEO07 CHAIR, WHICH CANNOT BE CHROMED AND
IS ONLY AVAILABLE IN ERP FINISHES). THEY HAVE COMFORTABLE FOAM SEATS (AND, WHERE APPLICABLE, FOAM BACK PADS)
WHICH CAN BE UPHOLSTERED IN FABRIC, VINYL OR LEATHER.
CHEO06
CHEO07
800
800
470
470
415
STACKING CHAIR
470
470
415
STACKING CHAIR
HS2004
1015
790
420
480
37
38
ROUND TUBE FAST FOOD UNIT, SHOWING SEAT STYLE 06.
MORRIS FAST FOOD UNITS ARE MANUFACTURED WITH A HEAVY DUTY STEEL FRAME WHICH CAN BE ERP COATED IN A CHOICE OF
COLOURS FOR A TOUGH, DURABLE FINISH. THERE IS A RANGE OF CONFIGURATION OPTIONS AVAILABLE, WITH THE UNITS
CONSTRUCTED TO SEAT 2, 4 OR 6 PERSONS WITH SQUARE, RECTANGULAR OR ROUND TABLE SHAPES. THERE ARE A NUMBER OF
SEAT STYLES TO CHOOSE FROM, INCLUDING PLASTIC, PLYFORM AND UPHOLSTERED DESIGNS.
SEAT STYLE 02
SEAT STYLE 03
SEAT STYLE 04
SEAT STYLE 05
SEAT STYLE 06
SEAT STYLE 07
SEAT STYLE 08
SEAT STYLE 10
SEAT STYLE 12
SEAT STYLE 13
SEAT STYLE 11
C A FE ONE
BY MORRIS
SEAT STYLE 09
MORRIS FAST FOOD UNITS ARE MANUFACTURED WITH A HEAVY DUTY STEEL FRAME WHICH CAN BE ERP COATED IN A CHOICE OF
COLOURS FOR A TOUGH, DURABLE FINISH. THERE IS A RANGE OF CONFIGURATION OPTIONS AVAILABLE, WITH THE UNITS
CONSTRUCTED TO SEAT 2, 4 OR 6 PERSONS WITH SQUARE, RECTANGULAR OR ROUND TABLE SHAPES. THERE ARE A NUMBER OF
SEAT STYLES TO CHOOSE FROM, INCLUDING PLASTIC, PLYFORM AND UPHOLSTERED DESIGNS.
SQUARE TUBE FAST FOOD UNIT, SHOWING SEAT STYLE 10.
39
SCREEN01: SIZES TO SPEC.
SCDB6 SCREEN: SIZES TO SPECIFICATION.
SCREEN03: SIZES TO SPEC.
THE SCREENS SHOWN HERE ARE JUST A FEW OF THE MANY DESIGNS AND VARIATIONS WHICH ARE AVAILABLE IN WOOD, LAMINATE
AND STEEL. THE WOODEN SCREENS CAN BE PLAIN OR TRELLISED WITH PLAIN, BORDERED OR LAMINATED PANELS. GLASS PANELS
CAN BE FROSTED TO INCORPORATE GRAPHICS SUCH AS A COMPANY LOGO. METAL SCREENS CAN BE MANUFACTURED TO ALMOST
ANY SPECIFICATION, AND SUPPLIED IN A WIDE VARIETY OF HARD WEARING FINISHES.
SCREENS CAN BE SUPPLIED WITH DURABLE HINGED
JOINTS FOR ADDED FLEXIBILITY. THE SHAPE OF THE
SCREENS CAN BE CUSTOMISED IN A WIDE VARIETY OF
DESIGNS.
CLOUD-TOP SCREENS, LAMINATED IN POLYREY
INFLUENCE MYRIADE VERT.
40
C A FE ONE
BY MORRIS
ROUND-TOP SCREENS, LAMINATED IN
FORMICA FUNDAMENTALS CHIANTI RED.
HINGED SCREENS ARE MANUFACTURED FROM HARD WEARING MDF AND FINISHED IN A WIDE RANGE OF
DURABLE LAMINATES. THEY CAN BE MADE UP IN ANY COMBINATION OF HEIGHTS, CONFIGURATIONS AND
LAMINATE COLOURS TO PROVIDE AN EXTREMELY VERSATILE WAY TO PARTITION ANY INTERIOR SPACE.
SQUARE-TOP SCREENS, LAMINATED
IN FORMICA FUNDAMENTALS
OATMEAL, LATTE AND HAVANA.
41
CHCOCO02
805
450
540
440
CHCOCO01
805
450
540
440
THE ‘COCO’ CHAIRS, CHCOCO01 AND
CHCOCO02, ARE CONSTRUCTED FROM HARD
WEARING MILD STEEL WHICH CAN BE
CHROMED OR ERP COATED IN A VARIETY OF
COLOURS. THE BEECH VENEERED PLYFORM
BACK CAN BE STAINED TO SPECIFICATION AND
THE SEAT CAN BE UPHOLSTERED IN FABRIC,
VINYL OR LEATHER.
COCO
THE ‘COCO’ HIGH STOOLS, HSCOCO01 AND
HSCOCO02, ARE CONSTRUCTED FROM HARD
WEARING MILD STEEL WHICH CAN BE CHROMED
OR ERP COATED IN A VARIETY OF COLOURS. THE
BEECH VENEERED PLYFORM BACK CAN BE STAINED
TO SPECIFICATION AND THE SEAT CAN BE
UPHOLSTERED IN FABRIC, VINYL OR LEATHER.
HSCOCO02
1045
805
535
HSCOCO01
1090
820
520
42
445
445
C A FE T WO
44
45
- 46
47
- 48
49
- 50
51
- 52
53
- 54
55
- 56
57
- 58
59
- 60
PHOTOGRAPH BY PAUL ZANRE / DESIGN BY DAVIDSON DESIGN
HS6904
1100
800
570
540
TU6904
800
500
500
510
THESE CHAIRS ARE ALL AVAILABLE WITH MATCHING HIGH STOOLS,
AND CAN BE SUPPLIED WITH FOUR LEGS OR A CENTRE PEDESTAL
BASE. THE CHAIRS AND HIGH STOOLS ARE MANUFACTURED WITH A
HARD WEARING CHROME FRAME AND A DURABLE PLYFORM BACK
WHICH CAN BE STAINED TO SPECIFICATION. THE UPHOLSTERED
VERSIONS ARE AVAILABLE IN ANY CONTRACT STANDARD FABRIC,
VINYL OR LEATHER.
TU6903
800
500
500
TU6902
800
500
500
44
510
510
C AFE TWO
HS6905
1120
800
570
540
SWIVEL SEAT
TU6905
800
500
500
510
THESE CHAIRS ARE ALL AVAILABLE WITH MATCHING HIGH STOOLS,
AND CAN BE SUPPLIED WITH FOUR LEGS OR A CENTRE PEDESTAL
BASE. THE CHAIRS AND HIGH STOOLS ARE MANUFACTURED WITH A
HARD WEARING CHROME FRAME AND A DURABLE PLYFORM BACK
WHICH CAN BE STAINED TO SPECIFICATION. THE UPHOLSTERED
VERSIONS ARE AVAILABLE IN ANY CONTRACT STANDARD FABRIC,
VINYL OR LEATHER.
TU6901
800
500
500
510
SWIVEL SEAT
45
AC2208
770
420
520
550
THE AC2208 CHAIR HAS A HARD WEARING BASE AND COLUMN
WHICH ARE FINISHED IN BRUSHED STAINLESS STEEL. THE ROBUST
TIMBER SHELL CAN BE SUPPLIED IN BLEACHED OAK OR BLEACHED
OAK STAINED WENGE.
THE AC2207 CHAIR HAS A HARD WEARING
STEEL FRAME WHICH IS FINISHED IN
CHROME. THE ROBUST TIMBER SHELL CAN
BE SUPPLIED IN BLEACHED OAK OR
BLEACHED OAK STAINED WENGE.
AC2207
780
440
530
550
AC2206
780
440
530
550
THE AC2206 CHAIR HAS A HARD WEARING STEEL FRAME WHICH IS
FINISHED IN SATIN CHROME. THE ROBUST TIMBER SHELL CAN BE
SUPPLIED IN BLEACHED OAK OR BLEACHED OAK STAINED WENGE.
THE CHAIR IS AVAILABLE WITH OR WITHOUT UPHOLSTERY.
46
C AFE TWO
AC0503
710
420
590
655
THE AC0503 CHAIR HAS A HARD WEARING CHROME FRAME.
THE SEAT, BACK AND ARMS ARE UPHOLSTERED IN SALPA
SOFT LEATHER.
AC5702
780
450
470
550
THE AC5702 CHAIR HAS A HARD WEARING CHROME BASE
AND PEDESTAL. THE TWO-PART UPPER SHELL IS AVAILABLE
IN HARD LEATHER (19 DIFFERENT COLOUR OPTIONS) OR
SOFT ANILINE LEATHER (12 COLOURS).
CH5704
845
410
830
590
THE CH5704 CHAIR HAS A HARD WEARING CHROME FRAME.
THE SHELL IS AVAILABLE IN HARD LEATHER (19 DIFFERENT
COLOUR OPTIONS) OR SOFT ANILINE LEATHER (12
COLOURS).
47
HS6613
HS6614
970
970
700
470
700
470
470
STACKING
STACKING
HS6615
970
700
470
470
STACKING
THE HS6613, HS6614 AND HS6615 HIGH STOOLS ARE MANUFACTURED WITH HARD WEARING
STEEL FRAMES, WHICH CAN BE SUPPLIED IN CHROME OR A BLACK LAQUERED FINISH. HS6613
IS AVAILABLE IN BONDED LEATHER (BLACK, BLUE, BULGAR RED, NATURAL, LIGHT GREY OR
TOBACCO) OR SECOND QUALITY LEATHER (BLACK, LIGHT GREY, NATURAL, BROWN, BULGAR
RED OR WHITE). HS6614 HAS A PVC WIRE SEAT AND BACK, AVAILABLE IN BLACK, BLUE OR
TRANSPARENT. HS6615 HAS A BLACK WOVEN BONDED LEATHER SEAT AND BACK.
THE HS6903 HIGH STOOL AND CH6901 CHAIR
BOTH HAVE A HARD WEARING STEEL FRAME
WHICH IS FINISHED IN CHROME, A BEECH BACK
AND AN UPHOLSTERED SEAT.
HS6903
1140
780
550
CH6901
850
480
480
48
470
450
470
C AFE TWO
CH7101
860
460
540
440
THE AC7101 AND CH7101 CHAIRS BOTH HAVE A HARD
WEARING STEEL FRAME WHICH IS AVAILABLE IN CHROME
OR SATIN ALUMINIUM ERP.
AC7101
670
860
460
590
620
HS7101
780 980
470
510 710
400
THE HS7101 HIGH STOOL HAS A HEIGHT
ADJUSTABLE CHROME FRAME WITH A
GAS LIFT MECHANISM. THE HS7102 HIGH
STOOL HAS A ROBUST STEEL FRAME
WHICH CAN BE FINISHED IN CHROME
OR SATIN ALUMINIUM ERP.
HS7102
1030
770
510
410
49
AC6409
870
870
480
560
580
480
560
500
THE AC6409 AND CH6417 CHAIRS HAVE A ROBUST
TIMBER FRAME AND AN UPHOLSTERED SEAT AND
BACK.
CH6414
870
480
560
500
AC6410
870
480
560
580
THE AC6410 AND CH6414 CHAIRS HAVE A ROBUST TIMBER
FRAME, A SLATTED TIMBER BACK AND AN UPHOLSTERED
SEAT.
50
CH6417
AC6411
870
870
480
560
C AFE TWO
CH6415
480
560
500
SWIVEL SEAT
580
SWIVEL SEAT
CH6416
870
480
560
500
SWIVEL SEAT
THE AC6411 AND CH6415 CHAIRS HAVE A CHROME BASE AND COLUMN,
UPHOLSTERED SEAT AND TIMBER BACK. THE CH6416 CHAIR ALSO HAS A CHROME
BASE AND COLUMN AND HAS A FULLY UPHOLSTERED SEAT AND BACK.
CH6413
HS6404
870
970
480
560
500
740
535
455
THE CH6413 CHAIR AND HS6404 HIGH STOOL HAVE A
ROBUST TIMBER FRAME AND UPHOLSTERED SEAT.
51
AC7202
820
480
530
AC7201
820
480
530
520
THE AC7201 AND AC7202 CHAIRS ARE MANUFACTURED WITH
A HARD WEARING STEEL FRAME WHICH IS FINISHED IN
CHROME AND A BEECH BACK WHICH CAN BE STAINED.
AC7204
820
480
530
520
AC7203
820
480
530
520
THE AC7203 AND AC7204 CHAIRS ARE MANUFACTURED WITH
A HARD WEARING STEEL FRAME WHICH IS FINISHED IN
CHROME AND A BEECH BACK WHICH CAN BE STAINED.
52
520
880
450
410
440
C AFE TWO
CH3719
THE CH3719 AND AC3703 CHAIRS ARE MANUFACTURED WITH A HARD WEARING TIMBER
FRAME. CH3719 IS AVAILABLE WITH AN UPHOLSTERED SEAT, AN UPHOLSTERED BACK OR
WITH AN UPHOLSTERED SEAT AND BACK. AC3703 HAS CHROME ARMRESTS AND IS
AVAILABLE IN THE SAME UPHOLSTERY OPTIONS AS CH3719.
AC3703
640
880
450
410
440
53
CH5703
1030
440
600
530
THE CH5703 CHAIR HAS A ROBUST STEEL FRAME WHICH IS FINISHED IN CHROME. THE SUEDE UPHOLSTERY IS AVAILABLE IN A
CHOICE OF SIX COLOURS.
CH7204
850
460
510
400
THE CH7204 CHAIR HAS A CHROME FRAME AND A FULLY UPHOLSTERED SHELL.
CH7205
880
450
490
425
THE CH7205 CHAIR HAS A CHROME
FRAME AND A BEECH SHELL WITH A
REGENERATED LEATHER FACE. AN ERP
FRAME IS AVAILABLE ON REQUEST.
54
850
450
530
490
THE CH6622 CHAIR IS MANUFACTURED FROM ROUND STEEL
TUBE, WHICH CAN BE ALUMINIUM ERP COATED OR CHROMED.
THE SEAT AND BACK ARE UPHOLSTERED IN DURABLE C2
LEATHER, IN A CHOICE OF COLOURS: NATURAL, BULGAR RED,
BLUE, BLACK, LIGHT GREY, MINK, TOBACCO, NATURAL RUGA
AND RED RUGA.
C AFE TWO
CH6622
GIORGIA: DESIGN EDY E PAOLO CIANI
HS6612
630 870
540 780
420
390
THE HS6612 HIGH STOOL HAS A HEIGHT ADJUSTABLE BASE WHICH IS FINISHED IN
CHROME OR HAMMERED ALUMINIUM ERP. THE SEAT IS UPHOLSTERED IN BONDED
LEATHER, WHICH IS AVAILABLE IN BLACK, MINK, TOBACCO AND NATURAL RUGA.
HS0405
1100
360
800
360
THE HS0405 HIGH STOOL HAS A ROBUST STEEL FRAME WHICH IS
FINISHED IN ALUMINIUM ERP OR CHROME. THE SEAT AND BACK ARE
UPHOLSTERED IN LEATHERETTE, WHICH IS AVAILABLE IN CREAM, RED,
GREEN, BLACK, YELLOW, WHITE, ORANGE AND BROWN.
55
HS2205
THE HS2205 HIGH STOOL IS MANUFACTURED WITH A
HARD WEARING METAL FRAME WHICH IS CHROMED
FOR A DURABLE FINISH. THE SEAT CAN BE
800
400
HS2216
1120
820
400
325
400
HARD WEARING METAL BASE AND FOOTREST, WHICH
CAN BE FINISHED IN ERP COATING, SATIN CHROME,
CHROME OR BRASS. THE SEAT CAN BE UPHOLSTERED
IN FABRIC, VINYL OR LEATHER.
SWIVEL SEAT
HS2204a
775
400
56
400
THE HS2204a HIGH STOOL IS MANUFACTURED WITH A
CAN BE FINISHED IN ERP COATING OR CHROME. THE
SEAT CAN BE UPHOLSTERED IN FABRIC, VINYL OR
LEATHER.
775
400
400
CAN BE FINISHED IN BLACK ERP COATING, SATIN
CHROME OR CHROME. THE SEAT CAN BE
HS6601b
THE HS6601b HIGH STOOL IS MANUFACTURED WITH A
HARD WEARING METAL FRAME, WHICH IS CHROME
PLATED FOR A DURABLE FINISH. THE SEAT CAN BE
820 /
710
400
HS2218
840
400
400
C AFE TWO
HS2203
400
CAN BE FINISHED IN ERP COATING, SATIN CHROME,
CHROME OR BRASS. THE SEAT CAN BE UPHOLSTERED
57
CH7701
890
890
470
520
420
470
520
420
AC7701
890
470
520
520
THE CH7701, CH7704 AND AC7701 CHAIRS ARE MANUFACTURED WITH A HARD WEARING STEEL FRAME WHICH CAN BE BLACK ERP
COATED FOR A DURABLE FINISH. THE CUSHIONED SEAT PAD CAN BE UPHOLSTERED IN FABRIC, VINYL OR LEATHER.
THE TA7701 AND TA7702 TABLES ARE ALSO CONSTRUCTED FROM HARD WEARING STEEL, WHICH CAN BE BLACK ERP COATED. TABLE
TOPS CAN BE CHOSEN FROM THE SELECTION SHOWN ON THE BACK PAGE OF THE DIRECTORY.
TA7702
680
TA7701
680
58
CH7704
C AFE TWO
LS7701
460
400
400
HS7701
730
400
400
THE LS7701 AND HS7701 STOOLS ARE
MANUFACTURED WITH A HARD WEARING STEEL FRAME WHICH CAN BE
BLACK ERP COATED OR CHROMED FOR
A DURABLE FINISH. THE CUSHIONED
SEAT PAD CAN BE UPHOLSTERED IN
HS7702
LS7702
810
365
510
365
365
365
TA7703
720
MAX.TOP SIZE 600 mm diameter
THE HS7702 HIGH STOOL, LS7702 LOW STOOL AND TA7703 TABLE ARE MANUFACTURED WITH A HARD
WEARING STEEL FRAME WHICH CAN BE ERP COATED OR CHROMED FOR A DURABLE FINISH. THE STOOLS
CAN BE UPHOLSTERED IN FABRIC, VINYL OR LEATHER. A TOP FOR THE TABLE CAN BE CHOSEN FROM THE
SELECTION ON THE BACK PAGE OF THE DIRECTORY.
59
CH2204
HS2204b
800
1070
450
500
800
520
420
HS2208
1070
800
520
450
THE CH2204 CHAIR AND HS2204b HS2208 HIGH STOOLS ARE MANUFACTURED WITH A HARD WEARING STEEL FRAME WHICH CAN
BE FINISHED IN BLACK ERP, COLOUR ERP, CHROME OR SATIN CHROME. THEY CAN BE SUPPLIED WITH A DURABLE TIMBER SEAT OR
WITH A FOAM SEAT PAD FOR EXTRA COMFORT. THE SEAT PAD CAN BE UPHOLSTERED IN FABRIC, VINYL OR LEATHER.
CH2206
880
450
500
CH2207
880
450
500
400
THESE CHAIRS ARE MANUFACTURED WITH A HARD WEARING STEEL
FRAME WHICH CAN BE ERP COATED FOR A DURABLE FINISH. THEY
CAN BE SUPPLIED WITH A DURABLE TIMBER SEAT OR WITH A FOAM
SEAT PAD FOR EXTRA COMFORT. THE SEAT PAD CAN BE UPHOLSTERED IN FABRIC, VINYL OR LEATHER.
60
450
400
PLASTIC
62 - 64
65 - 67
68 - 70
71 - 73
74 - 76
77 - 79
80 - 82
83 - 85
86 - 88
PHOTOGRAPH BY PAUL ZANRE / DESIGN BY COBB AN LIRONI WEDDELL & THOMPSON
CH6705
780
440
490
440
STACKING CHAIR
OUTDOOR USE
THE CH6705 CHAIR HAS AN ANODISED ALUMINIUM FRAME. THE
TECHNOPOLYMER SEAT AND BACK CAN BE SUPPLIED IN A
CHOICE OF COLOURS: WHITE, BEIGE, SAGE, GREY, RED, BLUE,
BLACK, LIGHT GREY, DARK GREY, BURGUNDY, DARK ORANGE,
TURQUOISE, MUSTARD, SAFFRON AND BROWN.
THE CH6630 CHAIR CAN BE SUPPLIED WITH A CHROME
OR HAMMERED ALUMINIUM ERP FRAME. THE SEAT AND
BACK ARE MADE FROM DURABLE ABS TECHNOPOLYMER
AND THE COLOURES AVAILABLE ARE BLACK, GREEN,
RED, ORANGE, WHITE, RED AND BROWN. THE CHAIR IS
ALSO AVAILABLE IN TRANSPARENT POLYCARBONATE.
CH6630
810
440
540
470
STACKING CHAIR
THE CH6631 CHAIR IS MADE FROM POLYPROPYLENE
INJECTED WITH AIR MOULDING TECHNOLOGY, AND
CAN BE SUPPLIED IN A CHOICE OF COLOURS: WHITE,
MUSTARD, SAFFRON, ORANGE, RED, BROWN, BLACK
AND LIGHT GREY.
VENEZIA: DESIGN PAOLO FAVARETTO
CH6631
770
435
510
62
STACKING CHAIR
520
OUTDOOR USE
PLASTIC
AC6618
810
440
600
620
THE AC6618 CHAIR HAS A ROBUST STEEL BASE
PLATE AND COLUMN WHICH CAN BE SUPPLIED IN
A CHROME, BLACK OR WHITE FINISH. THE
TECHNOPOLYMER SHELL IS AVAILABLE IN FOUR
COMBINATIONS OF BLACK AND WHITE: WHITE
INNER SHELL, WHITE OUTER SHELL / BLACK INNER
SHELL, BLACK OUTER SHELL / WHITE INNER SHELL,
BLACK OUTER SHELL / BLACK INNER SHELL, WHITE
OUTER SHELL.
BUBBLE: DESIGN MARCELLO ZILIANI
CH6706
HS6704
830
1180
450
460
420
750
460
420
STACKING CHAIR
THE CH6706 CHAIR HAS A METAL FRAME WHICH CAN BE CHROMED
OR ERP COATED IN GREY, BLACK, WHITE OR RED. THE HS6704 HIGH
STOOL ALSO HAS A METAL FRAME WHICH CAN BE CHROMED OR
ERP COATED IN BLACK, WHITE OR RED. BOTH ITEMS HAVE
TECHNOPOLYMER SHELLS, WHICH ARE AVAILABLE IN WHITE, BEIGE,
SAGE, RED, BLACK, GREY, MUSTARD, SAFFRON, BROWN, FAWN AND
TOBACCO.
63
CH2217
735
430
530
SWIVEL SEAT
UPHOLSTERED SEAT CUSHION
THE CH2217 CHAIR HAS A ROBUST
STEEL BASE PLATE AND COLUMN WHICH
CAN BE SUPPLIED IN A CHROME,
BRUSHED STEEL OR POLISHED STEEL
FINISH. THE TECHNOPOLYMER SHELL IS
AVAILABLE IN A RANGE OF COLOURS
(BLACK, RED, IVORY OR WHITE) AND
TRANSPARENT COLOURS (ORANGE,
GREEN, RED, SMOKED GREY AND
TRANSPARENT*). IT CAN BE FITTED
WITH AN UPHOLSTERED SEAT CUSHION
FOR EXTRA COMFORT. THE CHAIR CAN
ALSO BE SUPPLIED WITH A GAS LIFT TO
ADJUST THE HEIGHT, SHOULD THIS BE
NECESSARY.
CH2217
(ADJUSTABLE)
750 900
530
430 520
590
ADJUSTABLE HEIGHT (GAS LIFT) OPTION
*TRANSPARENT SHELL ONLY AVAILABLE
WITH THE GAS LIFT3 CHAIR, NOT THE
FIXED BASE VERSION.
CH2218
750
430
530
590
THE CH2218 CHAIR HAS A ROBUST STEEL FRAME WHICH CAN
BE SUPPLIED IN EITHER A CHROME OR ALUMINIUM ERP FINISH.
THE DURABLE MULTILAYER TECHNOPOLYMER SHELL IS
AVAILABLE IN A CHOICE OF TWO COLOURS: IVORY AND
WHITE. ALTERNATIVELY, THE CHAIR CAN BE SUPPLIED WITH
AN ACRYLIC SHELL, WHICH IS AVAILABLE IN RED OR BLACK.
64
590
HS2235
460
PLASTIC
8001000
600800
530
THE HS2235 HIGH STOOL HAS A ROBUST STEEL BASE PLATE
AND COLUMN WITH A CHROME FINISH, AND HAS A GAS
LIFT TO ADJUST THE HEIGHT. THE ACRYLIC SHELL IS
AVAILABLE IN A RANGE OF SOLID COLOURS (BLACK, RED
OR WHITE) AND TRANSPARENT COLOURS (ORANGE,
GREEN, RED, SMOKED GREY AND TRANSPARENT). THE
SHELL CAN ALSO BE SUPPLIED IN LEATHER WITH VISIBLE
STITCHING: BLACK, DARK BROWN, RED, NATURAL AND
TOBACCO.
BS2202
760
450
530
16802320
THE BS2202 BENCH SEATING SYSTEM
HAS A DURABLE BRUSHED STAINLESS
STEEL BASE AND FRAME, WITH IVORY
OR WHITE TECHNOPOLYMER SHELLS.
THE SYSTEM CAN BE SUPPLIED WITH
THREE SEATS, FOUR SEATS, OR THREE
SEATS AND A TABLE.
65
HS2236
1020
800
460
530
CH2219
730
440
530
590
THE CH2219 CHAIR HAS A HARD WEARING FRAME CONSTRUCTED FROM 10mm DIAMETER
STEEL ROD, WHICH IS CHROMED. THE CHAIR’S SHELL IS MADE OF DURABLE ACRYLIC,
WHICH IS AVAILABLE IN SOLID RED OR BLACK, AS WELL AS A VARIETY OF TRANSPARENT
COLOURS (ORANGE, GREEN, RED, SMOKED GREY AND TRANSPARENT). ALTERNATIVELY,
THE SHELL CAN BE MADE FROM TECHNOPOLYMER AND IS AVAILABLE IN WHITE OR IVORY.
THE CHAIR CAN ALSO BE SUPPLIED WITH A SEAT CUSHION FOR ADDED COMFORT, OR
UPHOLSTERED IN LEATHER WITH CONTRASTING VISIBLE STITCHING. LEATHER COLOURS
ARE BLACK, DARK BROWN, NATURAL, TOBACCO AND RED.
LEATHER UPHOLSTERY OPTION
CH2226
730840
632
420530
632
SWIVEL SEAT
THE CH2226 CHAIR HAS A ROBUST STEEL COLUMN AND AND
CAST ALUMINIUM BASE WHICH CAN BE SUPPLIED IN A SATIN
CHROME FINISH. THE SHELL IS AVAILABLE IN WHITE OR IVORY
(TECHNOPOLYMER) AND RED OR BLACK (ACRYLIC). THE CHAIR
HAS HARD WEARING WHEELS, A SWIVEL DEVICE AND A GAS LIFT
TO ADJUST THE HEIGHT.
66
PLASTIC
CH2215
840
450
530
450
STACKING CHAIR
ROUND TUBE FRAME
THE CH2215 CHAIR HAS A SQUARE OR ROUND TUBE FRAME WHICH CAN BE SUPPLIED IN CHROME,
SATIN CHROME OR SILVER POWDER COATED FINISH. THE TOUGH BUT FLEXIBLE TECHNOPOLYMER
SHELL IS AVAILABLE IN IVORY OR WHITE.
CH2216
840
450
530
460
STACKING CHAIR
HS2237
1060
800
540
470
THE CH2216 CHAIR AND HS2237 HIGH STOOL HAVE A SQUARE STEEL TUBE FRAME. THE CHAIR CAN BE SUPPLIED WITH A CHROME,
SATIN CHROME OR SILVER ERP FINISH, THE HIGH STOOL IN CHROME OR SATIN CHROME. THE DURABLE METHACRYLITE SHELL IS
AVAILABLE IN A CHOICE OF FIVE OPAQUE COLOURS: RED, BLUE, GREEN, OPALINE (A FROSTED WHITE) AND TRANSPARENT.
67
CH2228
840
450
530
STACKING CHAIR
THE CH2228 CHAIR IS CONSTRUCTED FROM HARD WEARING SQUARE STEEL TUBE
WITH A ROBUST SHELL MADE FROM NYLON OR POLYCARBONATE. THE NYLON
SHELL IS AVAILABLE IN BLACK, RED, IVORY AND WHITE WITH THE FRAME FINISHED IN
CHROME , SATIN CHROME, SLIVER, WHITE OR BLACK ERP. THE POLYCARBONATE
SHELL CAN BE SUPPLIED IN A CHOICE OF TRANSPARENT COLOURS (RED, ORANGE,
YELLOW AND CLEAR) WITH THE FRAME IN CHROME, SATIN CHROME OR SILVER ERP.
SOLID COLOURED SHELLS
68
460
TRANSPARENT COLOURED SHELLS
800
750
420
440
HS2238
(ADJUSTABLE)
600 800
420
650 850
PLASTIC
HS2238
440
THE HS2238 HIGH STOOL HAS A STEEL COLUMN, FOOTREST AND BASE PLATE AND CAN BE SUPPLIED WITH A GAS LIFT DEVICE TO
ADJUST THE HEIGHT. THE HS2239 HIGH STOOL IS CONSTRUCTED FROM HARD WEARING SQUARE-TUBE STEEL. BOTH HIGH
STOOLS HAVE A DURABLE ACRYLIC SEAT WHICH IS AVAILABLE IN CHROME, SOLID RED, SOLID BLACK, SOLID WHITE OR A CHOICE
OF TRANSPARENT COLOURS: RED, ORANGE, GREEN, SMOKED GREY AND CLEAR.
HS2239
700 /
850
480
650 /
750
460
69
AC6609
780890
590
700
SWIVEL SEAT
AC6612
810
400
570
700
SWIVEL SEAT
THE AC6609 CHAIR IS MANUFACTURED WITH A SOLID STEEL BASE PLATE AND STEEL TUBE COLUMN IN A CHROME OR HAMMERED
ALUMINIUM ERP FINISH, WITH A GAS LIFT MECHANISM TO ADJUST THE HEIGHT. THE AC6612 CHAIR HAS A STEEL TUBE FRAME
WHICH CAN BE SUPPLIED IN CHROME OR ALUMINIUM ERP FINISH. BOTH CHAIRS HAVE A ROBUST POLYPROPYLENE SHELL WHICH
IS AVAILABLE IN GREY, BLACK WHITE, OFF-WHITE, ORANGE OR RED. BOTH CHAIRS ARE SUPPLIED WITH A SWIVEL BASE.
BABA: DESIGN ADRIANO TOLOMEI
CH0406
830
450
450
460
STACKING CHAIR
THE CH0406 CHAIR HAS A HARD WEARING CHROME
FRAME AND A DURABLE PLASTIC SHELL. THE SHELL IS
AVAILABLE IN A VARIETY OF TRANSPARENT COLOURS;
RED, GREEN, BLUE, CLEAR AND ORANGE. THE SHELL
CAN ALSO BE SUPPLIED IN A SOLID BLACK OR WHITE
COLOUR.
70
390490
PLASTIC
AC6615
810
460
600
630
SWIVEL SEAT
AC6614
810
430
580
630
HS6616
680 830
500
600 750
500
THE AC6614 CHAIR HAS A ROBUST STEEL TUBE BASE, WHICH CAN BE SUPPLIED IN A
CHROME, HAMMERED ALUMINIUM ERP OR ORANGE ERP FINISH. THE AC6615 CHAIR
AND HS6616 HIGH STOOL BOTH HAVE A HARD WEARING STEEL TUBE COLUMN
AND STEEL BASE PLATE; ACC6615 CAN BE SUPPLIED IN CHROME OR HAMMERED
ALUMINIUM ERP, HS6616 IS ONLY AVAILABLE IN CHROME. BOTH CHAIRS AND HIGH
STOOL HAVE A SOFT BUT DURABLE POLYURETHANE SHELL, WHICH IS AVAILABLE IN
A CHOICE OF COLOURS: BLACK, LIGHT GREY, ANTHRACITE, RED AND ORANGE.
NOAH / NOAH STOOL: DESIGN MARCELLO ZILIANI
BS6601
440
400
1680
OUTDOOR USE
THE BS6601 BENCH IS MANUFACTURED FROM DURABLE MOULDED
POLYPROPYLENE RESIN, AND IS SUITABLE FOR EXTERIOR AS WELL AS INTERIOR USE. THE SHELL IS SUPPLIED HOLLOW, AND SHOULD BE FILLED WITH
SAND OR A SIMILAR SUBSTANCE FOR STABILITY AND WEIGHT. THE BENCH IS
AVAILABLE IN GREY, BEIGE, OFF-WHITE, BLUE, RED, GREEN AND ORANGE.
PANKOTTO: DESIGN BRUNO RAINALOI
71
CH2231
820
450
600
STACKING CHAIR
TRANSPARENT COLOURED SHELL
THE CH2231 CHAIR HAS A DURABLE CHROME FRAME.
THE SHELL CAN BE MADE FROM NYLON AND IS
AVAILABLE IN A CHOICE OF SOLID COLOURS: RED,
YELLOW, LILAC, WHITE AND BLACK. ALTERNATIVELY,
THE SHELL CAN BE MADE FROM POLYCARBONATE
AND IS AVAILABLE IN A CHOICE OF TRANSPARENT
COLOURS: RED, YELLOW, BLUE AND CLEAR. WITH THE
NYLON SHELL OPTION, THE CHAIR CAN BE SUPPLIED
WITH A BLACK OR WHITE ERP FRAME.
CH2232
810
450
570
515
STACKING CHAIR
THE CH2232 CHAIR HAS A DURABLE STEEL FRAME
WHICH CAN BE SUPPLIED IN BLACK, WHITE OR
SILVER ERP. THE FRAME CAN ALSO BE SUPPLIED IN
CHROME OR MATT CHROME. THE SHELL CAN BE
MADE FROM NYLON AND IS AVAILABLE IN A CHOICE
OF SOLID COLOURS: RED, YELLOW, LILAC, WHITE AND
BLACK. ALTERNATIVELY, THE SHELL CAN BE MADE
FROM POLYCARBONATE AND IS AVAILABLE IN A
CHOICE OF TRANSPARENT COLOURS: RED, YELLOW,
BLUE AND CLEAR.
72
520
PLASTIC
CH2213
840
450
490
430
STACKING CHAIR
OUTDOOR USE
UPHOLSTERED SHELL OPTION
AC2205
820
450
550
590
THE CH2213 CHAIR AND AC2205 ARMCHAIR HAVE A ROBUST
ANODISED ALUMINIUM FRAME WHICH IS SUITABLE FOR
INTERIOR OR EXTERIOR USE. THE DURABLE POLYPROPYLENE
SHELL IS AVAILABLE IN A CHOICE OF VIBRANT COLOURS: IVORY,
ANTHRACITE GREY, RED, YELLOW, ORANGE, APPLE GREEN AND
BLUE. THE CH2213 SHELL CAN ALSO BE FULLY UPHOLSTERED
FOR ADDED COMFORT, THE FABRIC COLOURS AVAILABLE ARE
IVORY, YELLOW, ORANGE, RED, BROWN, BLUE AND GREEN.
STACKING CHAIR
THE CH6802 CHAIR IS MADE FROM
DURABLE POLYMER WHICH IS BOTH UV
RESISTANT AND 100% RECYCLABLE. THE
CHAIR IS AVAILABLE IN A CHOICE OF
COLOURS: BLACK, WHITE, BLUE, LIME,
YELLOW, GREY, ORANGE, CREAM AND RED.
CH6802 (SIZE 5)
760
430
514
500
CH6802 (SIZE 6)
790
460
514
500
STACKING CHAIR
73
AC6601
840
460
590
STACKING CHAIR
UPHOLSTERED SEAT CUSHION
THE AC6601 CHAIR HAS A DURABLE STEEL TUBE FRAME, WHICH CAN BE SUPPLIED IN A HAMMERED ALUMINIUM ERP, HAMMERED
BLACK ERP OR CHROME FINISH. THE CHAIR HAS A ROBUST POLYPROPYLENE SHELL WHICH IS AVAILABLE IN A CHOICE OF
COLOURS: WHITE, BEIGE, PEACH, PISTACHIO, ANTHRACITE, BROWN, ORANGE, RED, BLUE, BLACK AND TRANSPARENT WHITE. IT
CAN ALSO BE SUPPLIED WITH AN UPHOLSTERED SEAT CUSHION FOR ADDED COMFORT.
HS6604
HS6604
(SWIVEL)
780
710
810
440
740
440
440
440
SWIVEL SEAT
(OPTIONAL)
THE HS6604 HIGH STOOL HAS A HARD WEARING
STEEL TUBE FRAME WHICH CAN BE SUPPLIED IN
CHROME, BLACK ERP OR HAMMERED ALUMINIUM ERP
FINISH. THE SEAT IS MADE FROM DURABLE
POLYPROPYLENE AND IS AVAILABLE IN A CHOICE OF
COLOURS: WHITE, BEIGE, PEACH, PISTACHIO, BLUE
AND BLACK. IT CAN ALSO BE SUPPLIED WITH A
SWIVEL SEAT, IF REQUIRED.
74
590
PLASTIC
CH6625
840
460
570
500
THE CH6625 CHAIR AND HS6609a
HIGH STOOL ARE CONSTRUCTED
WITH A HARD WEARING STEEL
TUBE FRAME, WHICH CAN BE
SUPPLIED IN A CHROME OR
HAMMERED ALUMINIUM FINISH.
THE ROBUST POLYPROPYLENE
SEAT AND BACK ARE AVAILABLE IN
A CHOICE OF COLOURS: BLACK,
BLUE, PISTACHIO, RED, BEIGE OR
WHITE. THE SEAT AND BACK CAN
ALSO BE UPHOLSTERED IN A
DURABLE BONDED LEATHER.
HS6609a
1130
750
590
490
CH6624
860
460
500
500
STACKING CHAIR
THE CH6624 CHAIR IS MANUFACTURED WITH A
HARD WEARING STEEL TUBE FRAME WHICH
CAN BE SUPPLIED IN A CHROME, HAMMERED
BLACK ERP OR HAMMERED ALUMINIUM ERP
FINISH. THE ROBUST COMPOUND SHELL IS
AVAILABLE IN A CHOICE OF BLACK, BROWN,
ORANGE, ICE GREY, IVORY AND WHITE.
75
CH6603
770
450
500
STACKING CHAIR
AC6611
770
450
500
640
STACKING CHAIR
THE CH6603 CHAIR AND AC6611 ARMCHAIR HAVE A ROBUST STEEL FRAME WHICH CAN BE SUPPLIED
IN A CHOICE OF CHROME, HAMMERED ALUMINIUM ERP OR HAMMERED BLACK ERP FINISH. THE SEAT
AND BACK (AND ARMRESTS ON THE ARMCHAIR) ARE AVAILABLE IN A VARIETY OF COLOURS: BEIGE,
PEACH, GREEN, BLUE, RED, WHITE OR BLACK.
CH6621
760
460
470
490
STACKING CHAIR
THE CH6621CHAIR IS CONSTRUCTED FROM ROBUST
STEEL, WITH TAPERED AND GENTLY CURVED LEGS. THE
FRAME CAN BE SUPPLIED IN A CHROMED OR HAMMERED
ALUMINIUM ERP FINISH. THE POLYPROPYLENE SHELL IS
AVAILABLE IN WHITE, BEIGE, PEACH, ANTHRACITE,
ORANGE, RED, BLUE OR BLACK.
76
420
PLASTIC
CH6604
840
460
470
470
STACKING CHAIR
HS6610
1000
720
530
500
STACKING STOOL
THE CH6604 CHAIR AND HS6610 HIGH STOOL ARE CONSTRUCTED FROM HARD
WEARING STEEL TUBE WHICH CAN BE SUPPLIED WITH A CHROME OR
HAMMERED ALUMINIUM ERP FINISH. THE SEAT AND BACK ARE AVAILABLE IN A
SELECTION OF COLOURS: BLACK, BEIGE, PEACH, PISTACHIO, ORANGE, RED, BLUE,
LIGHT GREY OR WHITE.
CH2229
790
450
470
440
STACKING CHAIR
THE CH2229 CHAIR HAS HARD
WEARING ALUMINIUM LEGS AND A
DURABLE POLYPROPYLENE SHELL.
THERE ARE A NUMBER OF SHELL
COLOURS AVAILABLE- ORANGE, BLACK,
WHITE, ANTHRACITE AND LIGHT GREY.
THE CHAIR CAN BE SUPPLIED WITH ERP
COATED LEGS TO MATCH THE SHELL OR
WITH A CONTRASTING COLOUR SHELL
AND POLISHED OR BRUSHED
ALUMINIUM LEGS. THE CHAIR IS ALSO
AVAILABLE IN LEATHER (BLACK, RED,
BEIGE OR WHITE), BUT THE LEATHER
VERSION DOES NOT STACK.
77
CH9801
CH9802
795
445
512
560
557
460530
581
STACKING CHAIR
SWIVEL SEAT
THE CH9801 AND CH9802 CHAIRS ARE
MANUFACTURED WITH A HIGH QUALITY
STAINLESS STEEL FRAME WHICH IS SUPPLIED
IN A DURABLE CHROME PLATED FINISH.
THE CH9802 HAS CASTORS AND A GAS LIFT
MECHANISM TO ADJUST THE HEIGHT. BOTH
CHAIRS HAVE A ROBUST POLYPROPYLENE
SHELL, WHICH IS AVAILABLE IN A CHOICE
OF COLOURS: WHITE, RED AND MOKA
BROWN.
AC9802
620
795
445
512
548
STACKING CHAIR
AC9801
620
795
445
511
THE AC9801 AND AC9802 CHAIRS ARE
STAINLESS STEEL FRAME WHICH IS
SUPPLIED IN A DURABLE CHROME PLATED
FINISH. THE HARD WEARING
POLYPROPYLENE SHELL IS AVAILABLE IN A
CHOICE OF COLOURS: WHITE, RED AND
MOKA BROWN.
78
780850
590
STACKING CHAIR
PLASTIC
CH9803-L
780
460
480
440
STACKING CHAIR
CH9803-M
(HEIGHT 740, SEAT HEIGHT 420 mm)
CH9803-S
HEIGHT 700, SEAT HEIGHT 380 mm
THE CH9803 CHILDREN’S CHAIR IS AVAILABLE IN THREE DIFFERENT SIZES, WITH SEAT
HEIGHTS OF 380, 420 AND 460 MILLIMETRES. THE FRAME IS MANUFACTURED FROM
HARD WEARING METAL TUBE, AND CAN BE CHROME PLATED OR ERP COATED. THE
ROBUST POLYPROPYLENE SHELL COMES IN A RANGE OF DIFFERENT COLOURS- YELLOW,
GREEN, CHARCOAL GREY, BEIGE, RED, LIGHT GREY, BLACK, BLUE AND PURPLE.
CH9804-L
580
340
380
400
STACKING CHAIR
CH9804-M
THE CH9804 CHILDREN’S CHAIR IS AVAILABLE IN THREE DIFFERENT SIZES, WITH SEAT
HEIGHTS OF 260, 300 AND 340 MILLIMETRES. THE FRAME IS MANUFACTURED FROM HARD
WEARING METAL TUBE, AND CAN BE CHROME PLATED OR ERP COATED. THE ROBUST
POLYPROPYLENE SHELL COMES A VARIETY OF DIFFERENT COLOURS- YELLOW, GREEN,
RED, BLUE, PALE BLUE, LIME GREEN, PALE YELLOW, PEACH AND LILAC.
CH9804-S
79
CH4603
675
830
830
460
490
505
STACKING CHAIR
460
490
505
STACKING CHAIR
BS4601
760/
820
600
THE CH4603 CHAIR AND AC4601 ARMCHAIR HAVE A HARD WEARING METAL FRAME WHICH CAN BE SUPPLIED
IN A BLACK ERP, EMBOSSED ALUMINIUM ERP OR CHROME FINISH. THEY HAVE A DURABLE POLYPROPYLENE
SHELL WHICH IS AVAILABLE IN A CHOICE OF COLOURS: BLUE, WHITE, PEACH, PISTACHIO AND BLACK. THE
BS4601 BENCH BEAM SEATING CAN BE MANUFACTURED WITH 2, 3, 4 OR 5 SEATS IN THE SAME RANGE OF
COLOURS. THE BEAM SEATING BASE CAN BE SUPPLIED IN A BLACK OR EMBOSSED ALUMINIUM FINISH.
CH6704
830
460
570
450
STACKING CHAIR
OUTDOOR USE
THE CH6704 CHAIR HAS AN ANODISED ALUMINIUM FRAME. THE
TECHNOPOLYMER SEAT AND BACK CAN BE SUPPLIED IN A
CHOICE OF COLOURS: BEIGE, YELLOW, SAGE, GREY, RED, LIGHT
ORANGE, BLUE, BLACK, NAVY, GREEN, DARK GREY, BURGUNDY
AND OLIVE GREEN.
80
AC4601
390/
450
1880
PLASTIC
CH4601
720
420
496
460
FOLDING CHAIR
TROLLEY OPTION
CH4602
720
420
496
THE CH4601 AND CH4602 CHAIRS ARE CONSTRUCTED FROM A LIGHTWEIGHT BUT HIGHLY
DURABLE EMBOSSED ALUMINIUM FRAME WITH A ROBUST POLYPROPYLENE SEAT AND BACK.
THE FRAME CAN BE SUPPLIED IN A GREY ERP OR CHROME FINISH. THE SEAT AND BACK
ARE AVAILABLE IN A CHOICE OF DIFFERENT COLOURS: BLUE, BORDEAUX RED, GREY, BLACK,
PEACH, ORANGE AND ANTHRACITE (DARK GREY).
460
UPHOLSTERED VERSION
CH4605
795
465
555
430
STACKING CHAIR
THE CH4605 CHAIR HAS A DURABLE EMBOSSED ALUMINIUM FRAME WITH A ROBUST
POLYPROPYLENE SEAT AND BACK. THE FRAME CAN BE SUPPLIED IN A GREY ERP, BLACK ERP OR
CHROME FINISH. THE SEAT AND BACK ARE AVAILABLE IN A CHOICE OF FOUR DIFFERENT
COLOURS: GREY, BLACK, BLUE AND BORDEAUX RED.
81
CH6702
880 1010
430 590
540
470
THE CH6702 CHAIR HAS A HEIGHT
ADJUSTABLE CHROME COLUMN. THE
TECHNOPOLYMER SHELL IS AVAILABLE
IN A CHOICE OF COLOURS: WHITE,
BEIGE, RED, BLUE, BLACK, NAVY, GREY,
BURGUNDY AND ORANGE.
THE CH6703 CHAIR HAS A CHROME FRAME
AND TECHNOPOLYMER SHELL. THERE IS A
CHOICE OF AVAILABLE COLOURS: WHITE,
BEIGE, RED, LIGHT ORANGE, BLUE, BLACK,
NAVY, GREY, BURGUNDY AND DARK ORANGE.
CH6703
820
530
470
BS6701
800
600
VARIES
OVERALL WIDTH (mm)
2
3
2
4
3
5
SEATS: 1000
SEATS: 1500
SEATS / 1 TABLE: 1500
SEATS: 2000
SEATS / I TABLE: 2000
SEATS: 2500
THE BS6701 BENCH HAS A BLACK ERP FRAME AND
TECHNOPOLYMER SEATS. THERE IS A CHOICE OF AVAILABLE
COLOURS: WHITE, BEIGE, RED, LIGHT ORANGE, BLUE, BLACK, NAVY,
GREY, BURGUNDY AND DARK ORANGE. THE WIDTH OF THE
BENCH VARIES ACCORDING TO THE CONFIGURATION OF SEATS
AND TABLES.
82
PLASTIC
HS0403
900
(750)
800
(650)
360
380
THE HS0403 HIGH STOOL HAS A ROBUST METAL FRAME
WHICH CAN BE SUPPLIED IN A CHROME FINISH. THE ACRYLIC
SEAT IS AVAILABLE IN A CHOICE OF COLOURS: RUBY RED,
ORANGE AND TRANSPARENT.
HS0404
1100
(950)
360
800
(650)
THE HS0404 HIGH STOOL HAS A ROBUST METAL FRAME
WHICH CAN BE SUPPLIED IN AN ALUMINIUM ERP OR
CHROME FINISH. THE ACRYLIC SEAT AND BACK ARE
AVAILABLE IN A CHOICE OF COLOURS: RUBY RED,
ORANGE AND TRANSPARENT.
360
HS0401
1010
(860)
360
800
(650)
380
THE HS0401 HIGH STOOL HAS A CHROME FRAME AND
POLYPROPYLENE SHELL. THERE IS A CHOICE OF SHELL COLOURS
AVAILABLE: BEIGE, TRANSPARENT WHITE, DARK BLUE AND BLACK
(CHARCOAL).
83
CHEO21
760
445
510
STACKING CHAIR
THE CHEO21 CHAIR IS MANUFACTURED WITH A
HARD WEARING TUBULAR STEEL FRAME, WHICH
CAN BE SUPPLIED IN A CHROME OR ERP COATED
FINISH. THE DURABLE POLYPROPYLENE SHELL IS
AVAILABLE IN A CHOICE OF FOUR COLOURS:
CHARCOAL, BLUE, CHOCOLATE AND BUFF.
CH0506
CH0505
840
850
470
520
490
590
510
480
STACKING CHAIR
STACKING CHAIR
HS0501
1110
730
520
410
THE CH0505 AND CH0506 CHAIRS AND THE HS0501 HIGH STOOL ARE ALL
MANUFACTURED WITH A STEEL FRAME WHICH IS FINISHED IN CHROME.
CH0505 IS ALSO AVAILABLE WITH AN ALUMINIUM LAQUERED FRAME. ALL
THREE ITEMS HAVE A DURABLE POLYPROPYLENE SHELL WHICH CANBE
SUPPLIED IN GREY, RED, ORANGE, WHITE, IVORY AND BLUE.
84
485
PLASTIC
CH6801
830
460
560
510
STACKING CHAIR
THE CH6801 CHAIR IS MANUFACTURED USING
AIR MOULDED TECHNOPOLYMER AND HAS A
HIGH GLOSS FINISH WHICH IS SCRATCH, STATIC
AND UV RESISTANT. THE CHAIR IS AVAILABLE IN
A CHOICE OF COLOURS: BLACK, WHITE, LIME,
RED, ORANGE, PURPLE AND CREAM.
CH6605
850
460
510
480
STACKING CHAIR
CHILDREN’S SIZE ALSO AVAILABLE (CH6632).
CH6632
600
THE CH6605 CHAIR HAS A HARD WEARING STEEL TUBE FRAME WHICH CAN BE FINISHED IN EITHER CHROME
OR HAMMERED ALUMINIUM ERP. THE SHELL IS MADE FROM DURABLE POLYPROPYLENE WHICH IS AVAILABLE IN
A CHOICE OF COLOURS: WHITE, BEIGE, PEACH, PISTACHIO, ORANGE, RED, BLUE OR BLACK. THE CH6632
CHILDREN’S CHAIR IS AVAILABLE IN RED, LIGHT BLUE, PISTACHIO, PINK, PEACH, WHITE, GREEN AND ORANGE.
350
390
380
85
750
400
400
DURABLE CHROME COLUMN AND BASE. THE ABS PLASTIC
SEAT IS HEIGHT ADJUSTABLE AND IS AVAILABLE IN A CHOICE
OF METALLIC COLOURS: BLACK, GREY, WHITE AND ORANGE.
HS0402
740 970
340
HS6703
750
400
86
THE HS6701 HIGH STOOL HAS A CHROME FRAME AND A
TECHNOPOLYMER SHELL. THE AVAILABLE COLOURS
ARE: WHITE, BEIGE, RED, BLUE, BLACK, GREY, ORANGE
AND BROWN.
HS6701
400
570 800
360
THE HS6703 HIGH STOOL HAS A CHROME FRAME AND A
TECHNOPOLYMER SHELL. THE AVAILABLE COLOURS
ARE: WHITE, BEIGE, RED, BLUE, BLACK, GREY, ORANGE
AND BROWN.
PLASTIC
HS6301
800 990
450
650 840
420
SWIVEL SEAT
FLOOR FIXED OPTION
THE HS6301 HIGH STOOL HAS A HARD WEARING CHROMED METAL
BASE AND A ROBUST PLASTIC SHELL, WHICH IS AVAILABLE IN BLUE,
YELLOW, RED, BLACK, WHITE, GREEN, ORANGE, GREY, IVORY AND
BORDEAUX RED. IT CAN BE SUPPLIED AS FIXED HEIGHT OR WITH A
GAS LIFT MECHANISM TO ADJUST THE HEIGHT, AND IS ALSO AVAILABLE
WITH A FLOOR FIXED BASE.
HS6302
810 1000
420
670 860
420
SWIVEL SEAT
THE HS6302 HIGH STOOL HAS A HARD WEARING CHROMED
METAL BASE AND A ROBUST PLASTIC SHELL, WHICH IS AVAILABLE
IN BLUE, YELLOW, RED, BLACK, WHITE, GREEN, ORANGE, GREY,
IVORY AND BORDEAUX RED. IT CAN BE SUPPLIED AS FIXED
HEIGHT OR WITH A GAS LIFT MECHANISM TO ADJUST THE
HEIGHT, AND IS ALSO AVAILABLE WITH A FLOOR FIXED BASE.
87
AC2203
665
800
450
530
580
STACKING CHAIR
THE AC2203 CHAIR IS CONSTRUCTED FROM HARD WEARING CAST
ALUMINIUM AND TUBE, WHICH CAN BE SUPPLIED IN A POLISHED
ALUMINIUM, POLISHED CHROME OR ERP COATED FINISH. THE
DURABLE POLYPROPYLENE SEAT AND BACK ARE AVAILABLE IN A
VARIETY OF COLOURS: YELLOW, IVORY, BLUE, BURGUNDY, BLACK,
RED, ORANGE, GREEN AND A FROSTED TRANSPARENT. THERE ARE
ALSO TWO TIMBER OPTIONS: NATURAL OAK AND WENGE
STAINED OAK.
CH2212
800
460
530
460
THE CH2212 CHAIR IS CONSTRUCTED FROM
HARD WEARING CAST ALUMINIUM AND
TUBE, WHICH CAN BE SUPPLIED IN A
POLISHED ALUMINIUM, POLISHED CHROME
OR ERP COATED FINISH. THE DURABLE
POLYPROPYLENE SEAT AND BACK ARE
AVAILABLE IN A VARIETY OF COLOURS:
YELLOW, IVORY, BLUE, BURGUNDY, BLACK,
RED, ORANGE, GREEN AND FROSTED
TRANSPARENT.
STACKING CHAIR
HS2228
1100
800
530
460
THE HS2228 HIGH STOOL IS CONSTRUCTED FROM HARD WEARING CAST
ALUMINIUM AND TUBE, WHICH CAN BE SUPPLIED IN A POLISHED CHROME
OR ERP COATED FINISH. THE DURABLE POLYPROPYLENE SEAT AND BACK
ARE AVAILABLE IN A VARIETY OF COLOURS: YELLOW, IVORY, BLUE, BURGUNDY,
BLACK, RED, ORANGE, GREEN AND FROSTED TRANSPARENT. THERE ARE ALSO
TWO TIMBER OPTIONS: NATURAL OAK AND WENGE STAINED OAK.
88
PLYFORM
90
- 91
92
- 93
94
- 95
96
- 97
98
- 99
100
- 101
102
PHOTOGRAPH BY PAUL ZANRE / DESIGN BY BURNS DESIGN LIMITED
CH2221
830
450
530
450
STACKING CHAIR
AC2204
830
450
530
THE CH2221 CHAIR HAS A SQUARE OR ROUND TUBE FRAME WHICH
IS AVAILABLE IN SATIN CHROME, CHROME OR ALUMINIUM POWDER
COATED FINISH. THE OAK VENEERED PLYFORM SHELL CAN BE
STAINED TO ANY COLOUR (FOR ORDERS OVER 20 PCS). THE CHAIR
CAN ALSO BE SUPPLIED WITH AN UPHOLSTERED SEAT PAD. THERE IS
AN ARMCHAIR AND A BEAM SEATING VERSION OF THE CHAIR
AVAILABLE, AS ILLUSTRATED.
BS2201
760
450
530
90
2320
590
PLYFORM
HS2234
1030
800
540
470
HS2233
800
325
325
HS2230
910
780
400
440
SWIVEL SEAT
THE HS2234 HIGH STOOL HAS A SQUARE TUBE FRAME WHICH IS
AVAILABLE IN SATIN CHROME OR CHROME FINISH. THE OAK
VENEERED PLYFORM SHELL CAN BE STAINED TO ANY COLOUR (FOR
ORDERS OVER 20 PCS).
AVAILABLE LEATHER COLOURS:
BLACK, DARK BROWN, LIGHT BROWN
HS2231
HS2232
990
1030
780
780
400
440
SWIVEL SEAT
450
400
SWIVEL SEAT
91
CH2223
830
450
530
STACKING CHAIR
THE CH2223 CHAIR HAS A SQUARE OR ROUND TUBE FRAME
WHICH IS AVAILABLE IN SATIN CHROME, CHROME OR
ALUMINIUM POWDER COATED FINISH. THE OAK VENEERED
PLYFORM SHELL CAN BE STAINED TO ANY COLOUR (FOR
ORDERS OVER 20 PCS).
CH2224
850
450
530
450
STACKING CHAIR
ROUND TUBE FRAME
ALUMINIUM POWDER COATED FINISH. THE PLYFORM SHELL
IS UPHOLSTERED IN GENUINE OR REGENERATED LEATHER
WITH VISIBLE STITCHING. AVAILABLE LEATHER COLOURS ARE
BLACK, DARK BROWN, LIGHT BROWN AND CREAM.
92
450
CH2214
1240
830
800
540
PLYFORM
HS2227
460
450
530
450
STACKING CHAIR
ALUMINIUM POWDER COATED FINISH. THE OAK VENEERED
PLYFORM SHELL CAN BE STAINED TO ANY COLOUR (FOR
ORDERS OVER 20 PCS). THE HS2227 HIGH STOOL IS
AVAILABLE IN CHROME OR SATIN CHROME AND CAN ONLY
BE SUPPLIED WITH A SQUARE TUBE FRAME.
CH2222
830
450
530
450
STACKING CHAIR
ROUND TUBE FRAME
THE CH2222 CHAIR HAS A SQUARE OR ROUND TUBE FRAME WHICH
IS AVAILABLE IN SATIN CHROME, CHROME OR ALUMINIUM POWDER
COATED FINISH. THE OAK VENEERED PLYFORM SHELL CAN BE
STAINED TO ANY COLOUR (FOR ORDERS OVER 20 PCS).
93
CH2001
810
450
525
510
STACKING CHAIR
UPHOLSTERED VERSION
10 YEAR GUARANTEE
AC2001
810
450
540
600
HS2001
1090
THE CH2001 AND AC2001 CHAIRS AND THE HS2001 HIGH STOOL
HAVE A CHROMED STEEL FRAME AND BEECH VENEERED PLYFORM
SHELL WHICH IS AVAILABLE IN ANY STANDARD RAL COLOUR OR
WOOD STAIN.
765
520
530
THESE PRODUCTS ARE ALSO AVAILABLE WITH AN UPHOLSTERED
SEAT PAD OR IN A FULLY UPHOLSTERED FINISH. THE CH2001 CHAIR
CAN BE MANUFACTURED WITH A USEFUL LINKING DEVICE SHOULD
THIS BE REQUIRED.
LINKING DEVICE
94
PLYFORM
CH2006
830
450
530
450
STACKING CHAIR
UPHOLSTERED VERSION
10 YEAR GUARANTEE
CH2007
865
455
505
490
STACKING CHAIR
THE CH2006 CHAIR HAS A CHROMED STEEL FRAME AND BEECH VENEERED PLYFORM SHELL WHICH IS AVAILABLE IN ANY STANDARD RAL
COLOUR OR WOOD STAIN ON REQUEST. IT CAN ALSO BE SUPPLIED WITH AN UPHOLSTERED SEAT PAD OR A FULLY UPHOLSTERED
SHELL. THE CH2007 CHAIR HAS A CHROMED STEEL FRAME AND COMES FULLY UPHOLSTERED IN BONDED LEATHER: BLACK, BLUE,
GREEN, NATURAL RUGA, MINK OR TOBACCO.
CH7206
870
450
490
410
STACKING CHAIR
THE CH7206 CHAIR IS MANUFACTURED WITH HARD WEARING CHROME
FRAME. THE DURABLE BEECH SHELL IS AVAILABLE IN A NATURAL FINISH,
OR CAN BE STAINED IN WENGE, LIGHT BEECH, WALNUT AND CHERRY.
OTHER VENEERS AND STAINS AVAILABLE ON REQUEST.
95
CH2004
805
440
490
410
STACKING CHAIR
HONEY PINE STAINED SHELL
HS2003
875
780
485
ITEMS CH2004, HS2003, CHT201 AND HST201 HAVE A CHROMED STEEL FRAME AND BEECH
VENEERED PLYFORM SHELL. THE SHELL CAN BE SUPPLIED IN ANY STANDARD RAL COLOUR OR
WOOD STAIN ON REQUEST.
CHT201
805
440
490
OAK STAINED SHELL
HST201
910
760
470
96
425
460
410
PLYFORM
CH6619
850
460
500
500
UPHOLSTERED: FABRIC
HS6605
870
720
520
UPHOLSTERED: BONDED LEATHER
STAINED VENEER
460
THE CH6619 CHAIR AND HS6605 HIGH STOOL HAVE A STEEL TUBE FRAME WHICH CAN BE
FINISHED IN CHROME OR HAMMERED ALUMINIUM ERP. THE PLYFORM SHELL IS VENEERED AND
CAN BE SUPPLIED IN NATURAL BEECH OR BEECH STAINED CHERRY. ALTERNATIVELY IT CAN BE
UPHOLSTERED IN BONDED LEATHER. BONDED LEATHER OPTIONS ARE WHITE, NATURAL, BULGAR
RED, FERRARI, BLUE, BLACK, LIGHT GREY, NATURAL OR RED RUGA, MINK AND TOBACCO. THE
CH6619 CHAIR IS ALSO AVAILABLE IN A SUPER VALUE SYNTHETIC VENEER FINISH, IN NATURAL
BEECH, CHERRY, MAPLE, WALNUT AND WENGE. THE CHAIR CAN BE ALSO BE UPHOLSTERED IN
FABRIC, AS ILLUSTRATED.
CH7202
870
445
470
400
STACKING CHAIR
THE CH7202 CHAIR IS MANUFACTURED WITH HARD WEARING
CHROME FRAME. THE DURABLE BEECH SHELL IS AVAILABLE IN A
NATURAL FINISH, OR CAN BE STAINED IN WENGE, LIGHT BEECH,
WALNUT AND CHERRY. OTHER VENEERS AND STAINS AVAILABLE
ON REQUEST.
97
CH6608
810
470
510
570
STACKING CHAIR
UPHOLSTERED VERSION
THE CH6608 CHAIR HAS A CHROMED STEEL FRAME WITH A VENEERED
PLYFORM SHELL WHICH IS AVAILABLE IN BEECH, CHERRY OR WENGE.
CH6629
720
380
630
630
THE CH6629 CHAIR HAS A HARD WEARING STEEL ROD FRAME WHICH CAN BE
FINISHED IN CHROME OR HAMMERED ALUMINIUM ERP. THE VENEERED PLYFORM
SHELL IS AVAILABLE IN NATURAL BEECH, WHICH CAN ALSO BE STAINED LIGHT
CHERRY OR WENGE. ALTERNATIVELY, THE SHELL CAN BE LAQUERED IN
EMBOSSED BLACK, WHITE OR RED
98
WITH UPHOLSTERED SEAT
RANIA: DESIGN ARTER & CITTON
870
470
510
420
PLYFORM
CH6623
UPHOLSTERED: BONDED LEATHER
PLYFORM: CHERRY
THE CH6623 CHAIR AND HS6609 HIGH STOOL HAVE A CHROME, ALUMINIUM ERP
OR NICKEL SATIN FRAME WITH THE SEAT AND BACK AVAILABLE IN A NUMBER OF
FINISHES. A PLYFORM SEAT AND BACK CAN BE SUPPLIED IN NATURAL BEECH OR
CHERRY, OR UPHOLSTERED IN BONDED LEATHER (BLACK, MINK OR TOBACCO).
HS6609b
1010
750
470
430
CH7203
870
445
470
400
STACKING CHAIR
THE CH7203 CHAIR IS MANUFACTURED WITH HARD
WEARING CHROME FRAME. THE DURABLE BEECH SHELL IS
AVAILABLE IN A NATURAL FINISH, OR CAN BE STAINED IN
WENGE, LIGHT BEECH, WALNUT AND CHERRY. OTHER
VENEERS AND STAINS AVAILABLE ON REQUEST.
99
CH6105
860
470
540
STACKING CHAIR
WITH UPHOLSTERED SEAT PAD
THE CH6105 AND CH6106 CHAIRS HAVE A SQUARE TUBE
FRAME WHICH IS AVAILABLE IN CHROME OR A VARIETY OF
COLOURED ERP FINISHES. THE VENEERED PLYFORM SHELL
CAN BE STAINED TO SPECIFICATION. THE CH6105 CHAIR
CAN BE SUPPLIED WITH A COMFORTABLE SEAT PAD IF
REQUIRED. THE SEAT PAD CAN BE UPHOLSTERED IN A WIDE
RANGE OF FABRICS, VINYLS AND LEATHERS.
CH6106
860
470
540
440
STACKING CHAIR
100
440
PLYFORM
HS6101
1090
780
540
440
CH6107
860
470
540
440
STACKING CHAIR
THE CH6107 CHAIR AND HS6101 HIGH STOOL HAVE A SQUARE TUBE FRAME
WHICH IS AVAILABLE IN CHROME OR A VARIETY OF COLOURED ERP FINISHES.
THE VENEERED PLYFORM SHELL CAN BE STAINED TO SPECIFICATION AND THE
CHAIRS CAN BE SUPPLIED WITH A COMFORTABLE SEAT PAD IF REQUIRED. THE
SEAT PAD CAN BE UPHOLSTERED IN A WIDE RANGE OF FABRICS, VINYLS AND
LEATHERS.
WITH UPHOLSTERED SEAT PAD
101
CH2003
830
450
540
YOUR LOGO
OR DESIGN
520
STACKING CHAIR
BLANK SHELL CAN BE CUSTOMISED
THE CH2003 CHAIR HAS A CHROMED STEEL
FRAME AND BEECH VENEERED PLYFORM SHELL.
THE SHELL IS AVAILABLE IN NATURAL BEECH OR
STAINED IN ANY STANDARD RAL COLOUR. FOR
QUANTITIES OF 80 PCS OR MORE, THE CUT-OUT
DESIGN ON THE BACK OF THE CHAIR CAN BE
CUSTOMISED TO YOUR SPECIFICATION. THIS
ALLOWS A WIDE RANGE OF POSSIBILITIES
WHICH CAN GIVE THE CHAIR A UNIQUE AND
DISTINCTIVE TWIST. THE SHELL CAN BE CUT
DOWN, ROUNDED OR TAPERED TO SUIT YOUR
DESIGN. THERE IS ALSO A WIDE RANGE OF
VENEERS AVAILABLE, INCLUDING OAK, WENGE,
ASH AND MAPLE.
PLEASE APPLY FOR A BLANK TEMPLATE OF THE
SHELL IF YOU WISH TO HAVE THE CHAIR
MANUFACTURED TO INCORPORATE YOUR
DESIGN.
CH2003 CHAIRS WITH CUSTOMISED SHELL DESIGNS FOR
A SEAFOOD RESTAURANT (ERP COATED SHELLS).
102
WOOD ONE
104
- 107
108
- 111
112
- 115
116
-119
120
- 123
124
- 127
128
- 131
132
- 135
136
- 140
PHOTOGRAPH BY PAUL ZANRE / DESIGN BY LEE BOYD ARCHITECTS
CH0922
HS0904a
830
1070
450
525
750
525
420
AC0914
700
820
460
500
535
THESE CHAIRS AND HIGH STOOLS ARE SOLIDLY CONSTRUCTED FROM HIGH QUALITY BEECH WOOD, WHICH CAN BE STAINED TO
SPECIFICATION IN A WIDE CHOICE OF COLOURS. THE CH0914, HS0928 AND AC0925 HAVE A CUSHIONED SEAT AND BACK FOR
ADDED COMFORT. THESE CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
HS0928
CH0914
1065
830
770
540
430
AC0925
700
840
470
550
104
420
550
450
525
420
WOOD ONE
CH0969
HS0930
845
1120
460
760
530
380
540
430
CH0969
UPHOLSTERED
870
440
495
410
THE CH0969 CHAIR AND HS0930 HIGH STOOL ARE SOLIDLY CONSTRUCTED FROM HIGH
QUALITY BEECH WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A WIDE CHOICE OF
COLOURS. THE SEAT CAN BE SUPPLIED IN A VENEERED FINISH OR FULLY UPHOLSTERED IN ANY
CH0954
785
450
480
420
CH0906
815
465
490
430
THE CH0906 AND CH0954 CHAIRS ARE SOLIDLY
CONSTRUCTED FROM HIGH QUALITY BEECH WOOD,
WHICH CAN BE STAINED TO SPECIFICATION IN A WIDE
CHOICE OF COLOURS.
105
CH0924
830
445
510
440
UPHOLSTERED SEAT
AC0906
635
825
440
520
THE CH0924 AND AC0906 CHAIRS AND HS0912 HIGH STOOL ARE SOLIDLY
CONSTRUCTED FROM HIGH QUALITY BEECH WOOD, WHICH CAN BE
STAINED TO SPECIFICATION IN A WIDE CHOICE OF COLOURS. THEY ARE
ALL AVAILABLE WITH A CUSHIONED SEAT PAD, WHICH CAN BE
520
HS0912
1090
760
470
390
CH0970
860
470
520
420
STACKING CHAIR
THE CH0970 CHAIR IS SOLIDLY CONSTRUCTED FROM
HIGH QUALITY BEECH WOOD, WHICH CAN BE STAINED
TO SPECIFICATION IN A WIDE CHOICE OF COLOURS.
106
CH0983
1110
810
440
760
500
WOOD ONE
HS0946
510
480
440
THE CH0983 CHAIR AND HS0946 HIGH STOOL ARE
SOLIDLY CONSTRUCTED FROM HIGH QUALITY BEECH
WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A
WIDE CHOICE OF COLOURS. THE CUSHIONED SEAT PAD
CAN BE UPHOLSTERED IN FABRIC, VINYL OR LEATHER.
CH0958
HS0932
830
1115
450
475
405
775
450
435
AC0931
830
450
510
THE CH0958 AND AC0931 CHAIRS AND HS0932 HIGH STOOL ARE SOLIDLY CONSTRUCTED
FROM HIGH QUALITY BEECH WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A
WIDE CHOICE OF COLOURS. THEY ARE ALL AVAILABLE WITH A CUSHIONED SEAT PAD,
550
107
CH0930
HS0911
830
1090
445
510
760
470
440
AC0908
635
825
440
520
THE CH0930 AND AC0908 CHAIRS AND HS0911 HIGH STOOL ARE SOLIDLY
CONSTRUCTED FROM HIGH QUALITY BEECH WOOD, WHICH CAN BE STAINED TO
SPECIFICATION IN A WIDE CHOICE OF COLOURS. THEY HAVE A CUSHIONED SEAT PAD,
AC0911 (ZEB)
CH0921 (ZEB)
700
840
845
460
535
470
535
540
440
STACKING CHAIR
HS0947 (ZEB)
1040
780
485
108
390
400
520
WOOD ONE
AC0924
698
840
460
535
540
CH0928
845
470
535
440
STACKING CHAIR
THESE CHAIRS ARE SOLIDLY CONSTRUCTED FROM HIGH QUALITY BEECH WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A
WIDE CHOICE OF COLOURS. THE CH0921 CHAIR IS AVAILABLE WITH A FIXED OR DETACHABLE SEAT PAD, WHICH CAN BE
CH0921
845
470
535
440
STACKING CHAIR
AC0911
700
840
460
535
540
109
CH0953
AC0933
935
935
460
520
460
520
460
THE CH0953 AND AC0933 CHAIRS ARE SOLIDLY
CHOICE OF COLOURS. THEY HAVE A CUSHIONED SEAT
AND BACK WHICH CAN BE UPHOLSTERED IN ANY
HS0924
CH0915
1130
910
760
530
490
455
550
495
STACKING CHAIR
WIDE CHOICE OF COLOURS. THEY HAVE A CUSHIONED
SEAT PAD WHICH CAN BE UPHOLSTERED IN ANY
110
510
HS0926
CH0940
850
750
450
WOOD ONE
1040
450
480
430
430
CH0951
850
450
480
430
THE CH0951 AND CH0940 CHAIRS AND HS0926 HIGH STOOL ARE SOLIDLY
CONSTRUCTED FROM HIGH QUALITY BEECH WOOD, WHICH CAN BE STAINED TO
SPECIFICATION IN A WIDE CHOICE OF COLOURS. THE CUSHIONED SEAT AND BACK
PADS CAN BE UPHOLSTERED IN FABRIC, VINYL OR LEATHER.
CH0925
930
460
520
450
THE CH0925 CHAIR AND HS0910 HIGH STOOL ARE SOLIDLY
CONSTRUCTED FROM HIGH QUALITY BEECH WOOD, WHICH
CAN BE STAINED TO SPECIFICATION IN A WIDE CHOICE OF
COLOURS. THE CUSHIONED SEAT PAD CAN BE UPHOLSTERED IN
HS0910
990
765
500
430
111
CH0927
HS0909
820
1090
450
550
750
520
510
AC0913
645
840
460
505
520
SPECIFICATION IN A WIDE CHOICE OF COLOURS. THEY ALL HAVE A CUSHIONED SEAT PAD FOR ADDED COMFORT. THESE CAN BE
HS0918
CH0934
1100
810
780
470
460
AC0932
810
460
470
112
470
470
460
470
470
HS0934
CH0939
840
765
510
WOOD ONE
1100
450
510
465
430
AC0912
650
845
450
510
540
THESE CHAIRS AND HIGH STOOLS ARE SOLIDLY CONSTRUCTED FROM HIGH QUALITY BEECH WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A WIDE CHOICE OF COLOURS. THE CH0933 AND AC0915 CHAIRS AND HS0914 HIGH STOOL HAVE A CUSHIONED SEAT PAD FOR
ADDED COMFORT. THESE CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
CH0933
HS0914
840
1095
450
510
430
780
505
460
AC0915
680
840
460
505
520
113
CH0977
900
1130
430
520
450
740
465
455
AC0936
890
445
560
THESE CHAIRS AND HIGH STOOL ARE SOLIDLY CONSTRUCTED FROM HIGH
QUALITY BEECH WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A WIDE
CHOICE OF COLOURS. THEY EACH HAVE A CUSHIONED SEAT PAD FOR ADDED
COMFORT. THESE CAN BE UPHOLSTERED IN ANY CONTRACT
CH0907
870
460
550
440
HIGH QUALITY BEECH WOOD, WHICH CAN BE
STAINED TO SPECIFICATION IN A WIDE CHOICE OF
COLOURS. IT HAS A CUSHIONED SEAT AND BACK
WHICH CAN BE UPHOLSTERED IN ANY CONTRACT
114
HS0940
550
WOOD ONE
CH0991
930
450
500
440
HIGH QUALITY BEECH WOOD, WHICH CAN BE
STAINED TO SPECIFICATION IN A WIDE CHOICE OF
COLOURS. IT HAS A FULLY UPHOLSTERED SEAT FOR
ADDED COMFORT. THIS CAN BE UPHOLSTERED IN
ANY CONTRACT STANDARD FABRIC, VINYL OR
LEATHER.
CH0966
HS0933
850
1100
445
420
460
770
430
395
THE CH0966 CHAIR AND HS0933 HIGH STOOL IS SOLIDLY
CHOICE OF COLOURS. THEY HAVE A CUSHIONED SEAT
PAD FOR ADDED COMFORT. THESE CAN BE UPHOLSTERED
IN ANY CONTRACT STANDARD FABRIC, VINYL OR
LEATHER.
115
CH0935
HS0919
840
1100
450
510
765
510
430
THE CH0935 AND AC0910 CHAIRS AND
HS0919 HIGH STOOL ARE SOLIDLY CONSTRUCTED FROM HIGH QUALITY BEECH
WOOD, WHICH CAN BE STAINED TO
SPECIFICATION IN A WIDE CHOICE OF
COLOURS.
AC0910
670
845
450
510
HS0948
CH0985
1100
880
730
530
460
455
580
465
THE CH0985 AND AC0948 CHAIRS AND
HS0948 HIGH STOOL ARE CONSTRUCTED
FROM HIGH QUALITY BEECH WOOD, WHICH
CAN BE STAINED TO SPECIFICATION IN A
WIDE CHOICE OF COLOURS. THEY HAVE A
CUSHIONED SEAT PAD WHICH CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD
AC0948
880
455
580
116
465
600
540
HS0938
CH0952
WOOD ONE
1120
960
750
510
480
560
400
480
AC0935
960
480
560
580
THE CH0952 AND AC0935 CHAIRS AND HS0938 HIGH STOOL ARE SOLIDLY CONSTRUCTED FROM HIGH
QUALITY BEECH WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A WIDE CHOICE OF COLOURS.
THEY HAVE A CUSHIONED SEAT PAD FOR ADDED COMFORT. THESE CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
CH0949
HS0937
815
1090
450
470
440
765
500
440
WIDE CHOICE OF COLOURS.
117
HS0902
CH0902
880
1145
765
450
500
535
465
AC0902
670
880
455
510
535
SPECIFICATION IN A WIDE CHOICE OF COLOURS. THE CH0904 AND AC0904 CHAIRS AND HS0903 HIGH STOOL HAVE A CUSHIONED SEAT PAD FOR ADDED COMFORT. THESE CAN BE UPHOLSTERED IN FABRIC, VINYL OR LEATHER.
HS0903
CH0904
1100
840
765
510
465
AC0904
670
845
450
510
118
460
540
450
510
430
HS0915
CH0931
815
750
510
WOOD ONE
1090
460
530
400
395
THESE CHAIRS AND HIGH STOOLS ARE SOLIDLY CONSTRUCTED FROM HIGH QUALITY BEECH WOOD,
WHICH CAN BE STAINED TO SPECIFICATION IN A
CH0913
HS0925
870
1150
455
510
460
760
490
460
AC0907
680
870
460
480
590
119
HS0913
CH0932
1100
840
765
450
510
510
430
AC0909
670
845
450
510
THE CH0917, CH0932 AND AC0909 CHAIRS AND HS0913 AND
HS0949 HIGH STOOL ARE SOLIDLY CONSTRUCTED FROM HIGH
QUALITY BEECH WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A WIDE CHOICE OF COLOURS.
CH0917
815
460
530
HS0949
750
470
120
465
470
395
540
CH0967
1110
880
760
460
WOOD ONE
HS0936
455
510
455
460
THE CH0967, AC0934 CHAIRS
AND HS0936 HIGH STOOL ARE
SOLIDLY CONSTRUCTED FROM
HIGH QUALITY BEECH WOOD,
WHICH CAN BE STAINED TO
SPECIFICATION IN A WIDE
CHOICE OF COLOURS.
AC0934
675
880
455
510
530
CH0962
CH0950
950
950
460
470
470
460
470
470
THE CH0950, CH0962 AND CH0963 CHAIRS ARE
WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN
A WIDE CHOICE OF COLOURS. THEY HAVE A CUSHIONED SEAT PAD FOR ADDED COMFORT. THIS CAN BE
UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC,
VINYL OR LEATHER.
CH0963
945
465
505
440
121
CH0959
CH0960
910
910
445
470
445
470
450
CH0961
910
445
470
THE CH0959, CH0960 AND CH0961 CHAIRS ARE SOLIDLY CONSTRUCTED FROM
HIGH QUALITY BEECH WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A
CH0968
CH0929
845
1000
450
540
440
THE CH0929 AND CH0968 CHAIRS ARE SOLIDLY CONSTRUCTED FROM HIGH QUALITY BEECH WOOD, WHICH
CAN BE STAINED TO SPECIFICATION IN A WIDE CHOICE
OF COLOURS. THEY HAVE A CUSHIONED SEAT PAD FOR
ADDED COMFORT, WHICH CAN BE UPHOLSTERED IN ANY
122
450
430
540
435
450
910
460
530
CH0926
980
460
540
430
490
TO SPECIFICATION IN A WIDE CHOICE OF COLOURS. IT
HAS A CUSHIONED SEAT PAD FOR ADDED COMFORT,
THIS CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
WOOD ONE
CH0964
THE CH0926 CHAIR IS SOLIDLY CONSTRUCTED
FROM HIGH QUALITY BEECH WOOD, WHICH
CAN BE STAINED TO SPECIFICATION IN A WIDE
CHOICE OF COLOURS. IT HAS A CUSHIONED
SEAT PAD FOR ADDED COMFORT, THIS CAN BE
CH0965
850
450
470
460
THE CH0965 CHAIR IS SOLIDLY CONSTRUCTED FROM HIGH QUALITY BEECH WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN
A WIDE CHOICE OF COLOURS.
123
CH0987
AC0950
840
830
440
545
450
605
485
HS0950
1070
720
480
440
THESE CHAIRS AND HIGH STOOLS ARE SOLIDLY CONSTRUCTED FROM HIGH QUALITY
BEECH WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A WIDE CHOICE OF
COLOURS. THEY ALL HAVE A CUSHIONED SEAT PAD FOR ADDED COMFORT. THESE CAN
BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
CH0989
840
440
545
AC0952
830
450
605
580
HS0952
1070
720
480
124
580
440
485
CH0988
830
840
440
450
605
WOOD ONE
AC0951
545
580
485
HS0951
1070
720
480
440
THESE CHAIRS AND HIGH STOOL ARE SOLIDLY CONSTRUCTED FROM HIGH QUALITY BEECH
WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A WIDE CHOICE OF COLOURS. THE
CUSHIONED SEATS AND, WHERE APPROPRIATE, BACKS CAN BE UPHOLSTERED IN ANY CONTRACT
AC0946
820
430
620
560
AC0944
820
430
620
560
AC0945
820
430
620
560
125
LS0901
(SEAT PAD)
470
360
HS0920
(SEAT PAD)
780
360
360
LS0901
(UPHOL. SEAT)
440
360
360
THE HS0920 AND LS0901 STOOLS ARE SOLIDLY CONSTRUCTED FROM HIGH QUALITY BEECH WOOD, WHICH CAN BE STAINED TO
SPECIFICATION IN A WIDE CHOICE OF COLOURS. THE STOOLS CAN BE SUPPLIED WITH A VENEER SEAT, AN UPHOLSTERED SEAT PAD
OR A FULLY UPHOLSTERED SEAT.
HS0920
750
360
360
HS0920
(UPHOL. SEAT)
750
360
LS0901
440
360
126
360
360
360
WOOD ONE
LS0902
(UPHOL. SEAT)
460
410
410
HS0922
(UPHOL. SEAT)
750
410
410
LS0902
460
410
410
THE HS0922, HS0929, LS0904 AND LS0902 STOOLS ARE SOLIDLY CONSTRUCTED FROM HIGH QUALITY BEECH WOOD, WHICH CAN BE
STAINED TO SPECIFICATION IN A WIDE CHOICE OF COLOURS. HS0922 AND LS0902 (ABOVE) ARE AVAILABLE WITH A FULLY UPHOLSTERED
SEAT. HS0929 AND LS0904 (BELOW) ARE AVAILABLE WITH AN UPHOLSTERED SEAT PAD.
LS0904
(SEAT PAD)
480
HS0929
(SEAT PAD)
340
340
780
340
340
LS0904
450
340
340
127
CH0956
830
445
510
440
HS0931
1090
760
470
390
THE CH0956 CHAIR AND HS0931 HIGH STOOL ARE SOLIDLY CONSTRUCTED FROM HIGH
QUALITY BEECH WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A WIDE CHOICE OF
COLOURS. THEY ARE AVAILABLE WITH A LACQUERED VENEER SEAT OR WITH A CUSHIONED
SEAT FOR ADDED COMFORT. THIS CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD
CH0923
815
460
490
395
STACKING CHAIR
CH0957
800
465
465
128
400
THE CH0923 AND CH0957 CHAIRS ARE SOLIDLY CONSTRUCTED FROM HIGH QUALITY
BEECH WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A WIDE CHOICE OF
COLOURS.
CH0986
790
790
395
540
WOOD ONE
AC0949
395
540
500
495
THE CH0986 AND AC0949 CHAIRS ARE SOLIDLY
CONSTRUCTED FROM HIGH QUALITY BEECH
WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A WIDE CHOICE OF COLOURS. THE
CHAIRS ARE FULLY UPHOLSTERED.
AC0955
830
440
600
THE CH0996 CHAIR IS SOLIDLY CONSTRUCTED
FROM HIGH QUALITY BEECH WOOD, WHICH CAN
BE STAINED TO SPECIFICATION IN A WIDE CHOICE
OF COLOURS. THE CHAIR HAS AN UPHOLSTERED
SEAT AND BACK.
580
THE AC0955 CHAIR IS SOLIDLY CONSTRUCTED
FROM HIGH QUALITY BEECH WOOD, WHICH CAN
BE STAINED TO SPECIFICATION IN A WIDE CHOICE
OF COLOURS. THE CHAIR HAS AN UPHOLSTERED
SEAT AND BACK.
CH0996
840
450
510
430
129
CH0916
805
460
520
445
THE CH0916 CHAIR IS SOLIDLY CONSTRUCTED FROM HIGH QUALITY BEECH
WOOD, WHICH CAN BE STAINED TO
SPECIFICATION IN A WIDE CHOICE OF
COLOURS.
AC0917
650
885
440
500
540
THE AC0917 CHAIR IS SOLIDLY CONSTRUCTED
FROM HIGH QUALITY BEECH WOOD, AND THE
LEGS CAN BE STAINED TO SPECIFICATION IN A
WIDE CHOICE OF COLOURS. IT IS FULLY UPHOLSTERED AND CAN BE SUPPLIED IN FABRIC,
VINYL OR LEATHER.
CH0918
840
450
510
430
TO SPECIFICATION IN A WIDE CHOICE OF COLOURS. IT
HAS A CUSHIONED SEAT PAD FOR ADDED COMFORT. THIS
CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD
130
TU0903
TU0904
745
390
525
WOOD ONE
745
560
390
525
560
TU0902
745
390
525
560
THE TU0902, TU0903 AND TU0904 CHAIRS ARE SOLIDLY CONSTRUCTED FROM HIGH QUALITY BEECH
WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A WIDE CHOICE OF COLOURS. THEY CAN BE
UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC. VINYL OR LEATHER.
CH0941
HS0923
790
1050
460
485
465
755
510
605
THE CH0941 AND AC0937
CHAIRS AND HS0923 HIGH
STOOL ARE SOLIDLY CONSTRUCTED FROM HIGH QUALITY
BEECH WOOD, WHICH CAN BE
STAINED TO SPECIFICATION IN A
AC0937
760
460
470
550
131
HS0916
LS0903
790
450
350
350
350
THE HS0916 AND LS0903 STOOLS ARE SOLIDLY CONSTRUCTED FROM
HIGH QUALITY BEECH WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A WIDE CHOICE OF COLOURS.
CH0973
890
460
515
HS0942
1095
750
515
435
THE CH0973 CHAIR AND HS0942 HIGH STOOL ARE SOLIDLY CONSTRUCTED FROM HIGH QUALITY BEECH WOOD, WHICH CAN BE
STAINED TO SPECIFICATION IN A WIDE CHOICE OF COLOURS.
132
350
435
CH0937
1115
890
750
530
WOOD ONE
HS0917
460
510
505
435
COLOURS.
HS0921
CH0943
1090
950
465
525
455
750
520
450
COLOURS.
133
CH0942
1060
460
470
470
WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A WIDE CHOICE OF COLOURS.
THE CH0942 HAS A CHOICE OF SEAT: SOLID
TIMBER, RUSH OR UPHOLSTERED IN FABRIC,
VINYL OR LEATHER. THE CH0936 HAS A
SOLID SEAT.
RUSH SEAT OPTION
CH0936
1060
450
470
470
CH0978
1010
450
470
465
RUSH SEAT OPTION
UPHOLSTERED SEAT OPTION
134
WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A WIDE CHOICE OF
COLOURS. THERE IS A CHOICE OF SEAT: SOLID TIMBER, RUSH OR UPHOLSTERED
WOOD ONE
TA1102
710
MAX.TOP SIZE:
1050 x 1050 mm OR 1050 mm diam.
TA1103
710
MAX.TOP SIZE: 1200 x 750 mm
THESE TABLES ARE SOLIDLY CONSTRUCTED FROM HIGH QUALITY BEECH WOOD, WHICH CAN BE STAINED TO SPECIFICATION IN A
WIDE CHOICE OF COLOURS. THERE IS A SELECTION OF TABLE TOPS SHOWN ON THE BACK PAGE OF THE DIRECTORY.
TA0910
720
TOP SIZE: 610 x 610 - 760 x 760 mm
OR 610 - 760 mm diam.
TA0911
720
135
TA0912
720
TA0913
720
TOP SIZE: 690 x 690 / 760 x 760 mm
THE TA0912 AND TA0913 TABLES ARE SOLIDLY CONSTRUCTED FROM HIGH QUALITY BEECH WOOD, WHICH CAN BE STAINED TO
SPECIFICATION IN A WIDE CHOICE OF COLOURS. THERE IS A SELECTION OF TABLE TOPS SHOWN ON THE BACK PAGE OF THE DIRECTORY.
CT0401
430
TOP SIZE TO SPECIFICATION
THESE TABLES ARE SOLIDLY CONSTRUCTED FROM HIGH QUALITY BEECH WOOD,
WHICH CAN BE STAINED TO SPECIFICATION IN A WIDE CHOICE OF COLOURS.
THERE IS A SELECTION OF TABLE TOPS SHOWN ON THE BACK PAGE OF THE DIRECTORY. THESE TABLES CAN ALSO BE MADE AS FULL DINING HEIGHT TABLES AS WELL
AS THE COFFEE TABLE HEIGHT SHOWN.
CT0402
430
136
TOP SIZE TO SPECIFICATION
AVAILABLE WITH SILVER COLOURED INSERTS
WOOD ONE
TA3003
710
MAX.TOP SIZE: 1200 x 1200 mm OR
1200 mm diam.
TA3001
710
MAX.TOP SIZE: 1200 x 1200 mm OR
1200 mm diam.
TA3006
710
MAX.TOP SIZE:
1200 x 1200 mm OR 1200 mm diam.
TA3007
710
MAX.TOP SIZE: 1200 x 750 mm
137
TA3002
710
MAX.TOP SIZE:
900 x 900 mm OR 900 mm diam.
TA3004
710
MAX.TOP SIZE: 1200 x 1200 mm OR 1200 mm diam.
TA0901
730
TA0903
730
TA0902
730
TOP SIZE: 600 mm diam.
138
TOP SIZES: 690 x 690 mm / 690 mm diam. / 760 x 760 mm / 760 mm diam.
WOOD TWO
140
– 142
143
– 145
146
– 148
149
– 152
153
– 156
157
– 160
161
– 164
165
– 168
169
– 172
CH5294
840
500
535
AC5231
900
510
630
615
AC5232
790
450
580
620
THE CHAIRS ON THIS PAGE ARE MANUFACTURED WITH A HIGH QUALITY WOODEN FRAME, WHICH
CAN BE STAINED TO SPECIFICATION. THEY CAN ALL BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
CH52108
CH52107
1010
1035
480
505
450
885
480
525
455
485
520
CH52109
140
470
455
WOOD TWO
141
CH5286
CH5287
925
925
475
540
475
540
470
470
STACKING CHAIR
AC5227
675
935
485
580
535
THE CHAIRS ON THIS PAGE ARE MANUFACTURED WITH A HIGH QUALITY
WOODEN FRAME, WHICH CAN BE STAINED TO SPECIFICATION. THEY CAN ALL BE
CH5288
CH5267
930
490
1020
470
540
535
470
470
HS5212
1160
745
610
470
CH5268
1010
470
535
142
470
WOOD TWO
143
CH5256
CH5257
980
980
490
500
490
500
450
AC5221
520
980
465
500
490
HS5209
975
750
490
THE CH5256, CH5257 AND AC5221 CHAIRS AND HS5209 HIGH STOOL ARE
MANUFACTURED WITH A HIGH QUALITY AND DURABLE WOODEN FRAME,
WHICH CAN BE STAINED TO SPECIFICATION. THEY CAN BE UPHOLSTERED
IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
430
THE CH5223 AND CH5224 CHAIRS ARE MANUFACTURED WITH A HIGH
QUALITY FRAME, WHICH CAN BE STAINED TO SPECIFICATION. THEY
HAVE CUSHIONED SEAT PADS WHICH CAN BE UPHOLSTERED IN ANY
CH5224
1055
465
480
465
CH5223
1055
465
480
144
450
470
WOOD TWO
145
AC5202
CH5207
655
860
865
495
475
520
565
480
510
HS5201
1050
730
440
400
THE CH5207 AND AC5202 CHAIRS AND HS5201 HIGH STOOL ARE MANUFACTURED WITH A
HIGH QUALITY AND DURABLE WOODEN FRAME, WHICH CAN BE STAINED TO SPECIFICATION.
THEY HAVE CUSHIONED SEAT PADS WHICH CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER. THE UPHOLSTERY CAN BE STITCHED AS SHOWN IN THE
PHOTOGRAPH OR PLAIN.
CH5281
CH5282
865
885
495
530
500
530
430
470
STACKING CHAIR
HS5211
1030
760
460
146
370
THE CH5281 AND CH5282 CHAIRS AND HS5211 HIGH STOOL ARE MANUFACTURED WITH A
HIGH QUALITY AND DURABLE WOODEN FRAME, WHICH CAN BE STAINED TO SPECIFICATION.
THEY CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
WOOD TWO
147
149
CH5209
CH5210
965
960
460
520
505
510
525
455
HS5202
1010
760
445
420
THESE CHAIRS AND HS5202 HIGH STOOL ARE MANUFACTURED WITH A
HIGH QUALITY AND DURABLE WOODEN FRAME, WHICH CAN BE STAINED
TO SPECIFICATION. THEY CAN BE UPHOLSTERED IN ANY CONTRACT
CH5211
CH5293
965
500
530
965
455
490
520
470
CH5241
930
495
520
CH5292
965
470
490
148
460
455
CH5246
955
955
460
495
460
495
480
480
HS5208
WOOD TWO
CH5245
1110
745
555
470
THESE CHAIRS AND HIGH STOOL ARE MANUFACTURED WITH A HIGH QUALITY AND DURABLE WOODEN FRAME, WHICH CAN BE
STAINED TO SPECIFICATION. THEY CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
CH5240
905
495
520
455
SEAT PAD: NO VISIBLE STITCHING
AC5214
635
930
480
505
595
149
AC5206
CH5219
685
900
900
450
450
500
500
455
HS5203
855
330
330
STAINED TO SPECIFICATION. THEY HAVE CUSHIONED SEAT PADS (CH5219 AND AC5206 HAVE BACK PADS TOO) WHICH CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
CH5269
CH5212
945
500
515
440
960
470
510
CH5271
940
460
530
150
510
445
445
CH5248
940
940
460
530
WOOD TWO
CH5247
460
530
445
445
CH5270
945
500
515
440
STAINED TO SPECIFICATION. WITH THE EXCEPTION OF THE CH5247 CHAIR THEY CAN BE UPHOLSTERED IN ANY CONTRACT
AC5220
CH5272
675
945
495
940
460
530
540
525
445
HS5207
1025
760
485
420
151
CH5221
CH5220
985
885
495
540
455
490
550
465
AC5207
705
880
495
620
620
THESE CHAIRS ARE MANUFACTURED WITH A HIGH QUALITY AND
DURABLE WOODEN FRAME, WHICH CAN BE STAINED TO SPECIFICATION. THEY ARE FULLY UPHOLSTERED AND ARE AVAILABLE IN ANY
CH5278
AC5224
875
475
670
570
990
450
465
465
500
STACKING CHAIR
AC5223
670
875
475
580
CH5279
990
465
520
152
445
510
CH5250
1015
945
740
480
WOOD TWO
HS5205
480
520
450
470
AC5208
670
910
470
560
640
THESE CHAIRS, SOFA AND HIGH STOOL ARE MANUFACTURED WITH A HIGH QUALITY AND DURABLE WOODEN FRAME, WHICH CAN BE STAINED TO SPECIFICATION.
THEY ARE FULLY UPHOLSTERED AND ARE AVAILABLE IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
CH5220
AC5225
670
850
885
490
550
470
560
465
640
SO5201
670
900
455
550
1150
153
AC5219
CH5201
700
950
950
485
485
560
575
465
CH5266
950
485
575
465
STACKING CHAIR
THE CH5201, CH5266 AND AC5219 CHAIRS ARE MANUFACTURED WITH A HIGH QUALITY AND
DURABLE WOODEN FRAME, WHICH CAN BE STAINED TO SPECIFICATION. THEY CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
CH52111
CH52110
930
930
435
570
420
475
585
THE CH52111 AND CH52110 CHAIRS
AND HS5213 HIGH STOOL ARE MANUFACTURED WITH A HIGH QUALITY AND
DURABLE WOODEN FRAME, WHICH
CAN BE STAINED TO SPECIFICATION.
HS5213
775
365
154
570
355
430
WOOD TWO
AC6408
CH6412
825
825
480
425
480
425
520
440
HS6403
900
730
425
445
THE CH6412 AND AC6408 CHAIRS AND HS6403 HIGH STOOL ARE MANUFACTURED WITH TIMBER
FRAMES AND BACKS AND UPHOLSTERED SEATS. AC6408 HAS CHROME ARMS.
CH1302
1000
470
540
450
AC5234
800
510
600
555
CH1303
1000
470
540
450
THESE CHAIRS ARE MANUFACTURED WITH A HIGH QUALITY AND DURABLE WOODEN
FRAME. THEY ARE FULLY UPHOLSTERED AND ARE AVAILABLE IN ANY CONTRACT
155
CH5228
AC5210
670
850
850
465
530
465
530
460
490
THE CH5228 AND AC5210 CHAIRS ARE MANUFACTURED WITH A HIGH
QUALITY AND DURABLE WOODEN FRAME, WHICH CAN BE STAINED TO
SPECIFICATION. THEY HAVE CUSHIONED SEAT PADS (CH5228 AND
AC5210 HAVE BACK PADS TOO) WHICH CAN BE UPHOLSTERED IN ANY
AC8903
670
850
470
560
630
AC8902
670
870
500
570
500
® REGISTERED MODEL
CH8901
870
500
570
500
® REGISTERED MODEL
® REGISTERED MODEL
156
THESE CHAIRS ARE MANUFACTURED WITH A HIGH QUALITY AND DURABLE BEECH
FRAME, WHICH CAN BE STAINED TO SPECIFICATION. THEY CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
WOOD TWO
AC8904
CH8902
670
850
850
470
570
470
570
610
610
® REGISTERED MODEL
HS8901
1070
760
530
460
® REGISTERED MODEL
® REGISTERED MODEL
THESE CHAIRS ARE MANUFACTURED WITH A HIGH QUALITY AND
DURABLE BEECH FRAME, WHICH CAN BE STAINED TO SPECIFICATION.
THEY CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC,
VINYL OR LEATHER.
CH8903
AC8901
670
850
870
470
540
480
500
570
500
® REGISTERED MODEL
® REGISTERED MODEL
LS8901
400
540
540
® REGISTERED MODEL
157
AC5222
635
925
430
620
750
THESE CHAIRS AND HIGH STOOL ARE MANUFACTURED WITH A HIGH QUALITY
AND DURABLE BEECH FRAME, WHICH CAN BE STAINED TO SPECIFICATION. THEY
CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR
LEATHER.
AC5226
715
935
470
550
CH5280
480
935
470
550
HS5210
1120
760
510
158
430
480
AC5237
620
860
620
855
425
610
WOOD TWO
AC5235
425
640
610
610
AC5236
620
865
425
630
610
THESE CHAIRS ARE MANUFACTURED WITH A HIGH QUALITY AND DURABLE BEECH
FRAME, WHICH CAN BE STAINED TO SPECIFICATION. THEY CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
CH5289
915
470
545
470
CH5296
815
425
550
645
159
CH5215
CH5214
910
910
465
450
465
450
420
THE CH5214 AND CH5215 CHAIRS ARE MANUFACTURED WITH A HIGH QUALITY AND DURABLE
WOODEN FRAME, WHICH CAN BE STAINED TO SPECIFICATION. THEY HAVE CUSHIONED SEAT PADS WHICH
CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD
AC5205
CH5216
680
900
900
450
500
505
THE CH5216 AND AC5205 CHAIRS ARE MANUFACTURED
WITH A HIGH QUALITY AND DURABLE WOODEN FRAME,
WHICH CAN BE STAINED TO SPECIFICATION. THEY HAVE
CUSHIONED SEAT PADS WHICH CAN BE UPHOLSTERED IN
160
420
450
500
455
WOOD TWO
TU5203
645
765
455
475
590
TU5202
645
765
455
475
590
THE TU5202 AND TU5203 CHAIRS ARE MANUFACTURED
WHICH CAN BE STAINED TO SPECIFICATION. THEY HAVE
CUSHIONED SEAT PADS (TU5203 HAS A BACK PAD TOO)
WHICH CAN BE UPHOLSTERED IN ANY CONTRACT
AC5238
815
490
590
540
AC5230
645
900
510
720
TU5201
670
730
400
700
665
THESE CHAIRS ARE MANUFACTURED WITH A HIGH QUALITY AND DURABLE WOODEN FRAME, WHICH CAN BE
STAINED TO SPECIFICATION. THEY ARE FULLY UPHOLSTERED AND ARE AVAILABLE IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
680
161
AC9101
870
460
530
530
THESE CHAIRS ARE MANUFACTURED WITH A HIGH QUALITY
AND DURABLE BEECH FRAME, WHICH CAN BE STAINED TO
SPECIFICATION. THEY CAN BE SUPPLIED WITH AN UPHOLSTERED SEAT PAD AND AN UPHOLSTERED BACK PAD.
CH9101
870
460
530
162
440
AC1302
680
880
580
WOOD TWO
AC1301
680
880
580
580
580
THE AC1301 AND AC1302 CHAIRS ARE MANUFACTURED WITH A HIGH QUALITY AND
DURABLE BEECH FRAME. THEY ARE FULLY UPHOLSTERED AND ARE AVAILABLE IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
(FOR MATCHING SIDECHAIR, SEE MODEL CH1301
ON PAGE 172).
CH5295
955
480
520
470
AC5216
655
975
475
590
600
THE AC5216 AND CH5295 CHAIRS ARE MANUFACTURED
WHICH CAN BE STAINED TO SPECIFICATION. AC5216 IS
FULLY UPHOLSTERED AND CH5295 HAS AN UPHOLSTERED
SEAT. BOTH ARE AVAILABLE IN ANY CONTRACT STANDARD
163
CH5253
CH5254
830
830
465
465
450
450
440
CH5255
830
465
450
440
THESE CHAIRS AND HIGH STOOL ARE MANUFACTURED WITH A HIGH QUALITY AND DURABLE
WOODEN FRAME, WHICH CAN BE STAINED TO SPECIFICATION. THEY HAVE CUSHIONED SEAT
PADS (CH5255 AND CH5275 HAVE BACK PADS TOO) WHICH CAN BE UPHOLSTERED IN ANY
CH5276
830
465
450
CH5275
440
830
465
450
HS5206
1035
730
460
164
440
450
440
WOOD TWO
CH5291
1005
485
480
465
CH5290
1005
485
480
465
THE CH5290 AND CH5291 CHAIRS ARE MANUFACTURED WITH A HIGH QUALITY WOODEN
FRAME, WHICH CAN BE STAINED TO SPECIFICATION. THEY HAVE CUSHIONED SEAT AND BACK
PADS WHICH CAN BE UPHOLSTERED IN ANY
CONTRACT STANDARD FABRIC, VINYL OR
LEATHER.
CH5260
CH5261
1050
1050
485
470
465
485
480
465
THE CH5259, CH5260 AND CH5261 CHAIRS ARE
WOODEN FRAME, WHICH CAN BE STAINED TO
SPECIFICATION. THEY HAVE CUSHIONED SEAT
PADS (CH5261 HAS A CUSHIONED BACK PAD
TOO) WHICH CAN BE UPHOLSTERED IN ANY
CONTRACT STANDARD FABRIC, VINYL OR
LEATHER.
CH5259
1050
485
480
465
165
CH5277
850
CH52106
470
485
480
495
460
CH52105
845
480
495
460
THESE CHAIRS ARE MANUFACTURED WITH A HIGH QUALITY AND DURABLE WOODEN FRAME, WHICH CAN BE STAINED
TO SPECIFICATION. THEY CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
CH5283
875
480
545
CH5284
475
865
500
530
CH5285
865
490
530
166
455
845
470
470
CH5297
910
945
480
500
WOOD TWO
CH5298
455
490
480
560
CH5299
910
480
500
480
THESE CHAIRS ARE MANUFACTURED WITH A HIGH QUALITY AND DURABLE WOODEN FRAME, WHICH CAN BE STAINED
TO SPECIFICATION. THEY CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
CH52104
1020
465
555
450
CH5249
900
490
540
445
THESE CHAIRS ARE MANUFACTURED WITH A HIGH QUALITY
AND DURABLE WOODEN FRAME, WHICH CAN BE STAINED
TO SPECIFICATION. CH5249 IS FULLY UPHOLSTERED AND
CH52104 HAS AN UPHOLSTERED SEAT. BOTH ARE AVAILABLE
IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
167
AC5213
715
830
480
540
580
AC5212
715
830
480
540
THE AC5212 AND AC5213 CHAIRS ARE MANUFACTURED WITH A HIGH QUALITY AND DURABLE
WOODEN FRAME, WHICH CAN BE STAINED TO SPECIFICATION. THEY HAVE CUSHIONED SEAT PADS
(AC5213 HAS A BACK PAD TOO) WHICH CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC,
VINYL OR LEATHER.
THE CH3702 CHAIR IS MANUFACTURED WITH A HIGH QUALITY AND DURABLE WOODEN FRAME. IT HAS A CUSHIONED
SEAT PAD WHICH CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
CH3702
850
490
490
420
CH5274
840
495
535
168
580
475
THE CH5274 CHAIR IS MANUFACTURED
WITH A HIGH QUALITY AND DURABLE
WOODEN FRAME, WHICH CAN BE STAINED
TO SPECIFICATION. IT HAS A CUSHIONED
SEAT AND BACK WHICH CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD
680
800
470
750
650
THE AC5217 CHAIR IS MANUFACTURED WITH A
HIGH QUALITY AND DURABLE WOODEN FRAME,
WHICH CAN BE STAINED TO SPECIFICATION. IT
IS FULLY UPHOLSTERED AND IS AVAILABLE IN
ANY CONTRACT STANDARD FABRIC, VINYL OR
LEATHER.
WOOD TWO
AC5217
AC5218
710
880
500
505
600
THE AC5218 CHAIR IS MANUFACTURED WITH A HIGH
QUALITY AND DURABLE WOODEN FRAME, WHICH CAN
BE STAINED TO SPECIFICATION. IT IS FULLY UPHOLSTERED AND IS AVAILABLE IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
AC5239
660
850
480
535
530
THE AC5239 CHAIR IS MANUFACTURED WITH A HIGH
QUALITY AND DURABLE WOODEN FRAME, WHICH CAN
BE STAINED TO SPECIFICATION. IT IS FULLY UPHOLSTERED AND IS AVAILABLE IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
169
CH9908
AC9907
680
830
860
460
460
550
630
490
AC9906
660
860
460
550
THE CH9908,AC9907 AND AC9906 CHAIRS ARE MANUFACTURED WITH A HIGH QUALITY
AND DURABLE WOODEN FRAME, WHICH CAN BE STAINED TO SPECIFICATION. THEY ARE
FULLY UPHOLSTERED AND ARE AVAILABLE IN ANY CONTRACT STANDARD FABRIC, VINYL
OR LEATHER.
CH5602
CH5601
1000
990
460
560
440
THE CH5601 AND CH5602 CHAIRS ARE MANUFACTURED
WHICH CAN BE STAINED TO SPECIFICATION. THEY ARE
FULLY UPHOLSTERED AND ARE AVAILABLE IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
170
630
460
520
440
490
CH3108
950
950
490
460
WOOD TWO
CH3107
490
460
450
450
THE CH3107 AND CH3108 CHAIRS ARE MANUFACTURED
WHICH CAN BE STAINED TO SPECIFICATION. THE CH3107
HAS A CUSHIONED SEAT PAD WHICH CAN BE UPHOLSTERED
IN ANY FABRIC, VINYL OR LEATHER. THE CH3108 HAS AN UPHOLSTERED SEAT AND BACK, WHICH CAN BE UPHOLSTERED
IN REGENERATED LEATHER: BLACK, OFF-WHITE, PALE YELLOW
OR TOBACCO.
CH4413
AC4404
650
830
830
480
560
480
480
620
570
LC4401
650
840
480
675
670
THE CH4413,AC4404 AND LC4401 CHAIRS ARE MANUFACTURED WITH A HIGH QUALITY AND
DURABLE WOODEN FRAME, WHICH CAN BE STAINED TO SPECIFICATION. THEY ARE FULLY UPHOLSTERED AND ARE AVAILABLE IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
171
CH1301
CH1006
860
980
470
470
470
520
540
490
HS1003
1110
740
520
470
THESE CHAIRS AND HIGH STOOL ARE MANUFACTURED WITH A HIGH QUALITY AND
DURABLE WOODEN FRAME, WHICH CAN BE STAINED TO SPECIFICATION. THEY ARE FULLY
UPHOLSTERED AND ARE AVAILABLE IN ANY CONTRACT STANDARD FABRIC, VINYL OR
LEATHER.
CH2233
800
470
540
445
THE CH2233 CHAIR IS MANUFACTURED WITH A HIGH QUALITY AND DURABLE WOODEN
FRAME, WHICH CAN IS AVAIALBLE IN BLEACHED OAK, BLEACHED OAK STAINED WENGE
OR WHITE LACQUERED FINISH.
172
TA BL E S
174
- 177
178
- 181
182
- 185
186
- 189
190
- 192
193
- 194
195
- 196
197
- 199
200
- 202
PHOTOGRAPH BY PAUL ZANRE / DESIGN BY BURNS DESIGN LIMITED
FLIP TOP AVAILABLE
COFFEE HEIGHT AVAILABLE
TA2201-1
HEIGHT: 730 mm
MAX TOP SIZE: 1300 mm diameter or 900 x 900 mm
TA2201-0
HEIGHT: 730 mm
MAX TOP: 850 mm diam.
or 600 x 600 mm
TA2201-2
HEIGHT: 730 mm
or 1100 x 1100 mm
TA2201-3
HEIGHT: 730 mm
MAX TOP: 1400 x 850 mm
CTA2201-1
HEIGHT: 500 mm
or 600 x 600 mm
TA2201-4
HEIGHT: 730 mm
AVAILABLE TABLE BASE FINISHES (TABLE TOPS SHOWN ON THE BACK PAGE OF THE DIRECTORY):
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
174
TA B L E S
PTA2201-1
HEIGHT: 1100 mm
or 700 x 700 mm
PTA2201-2
HEIGHT: 1100 mm
PTA2201-0
HEIGHT: 1100 mm
PTA2201-3
HEIGHT: 1100 mm
PTA2201-4
HEIGHT: 1100 mm
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
175
VENEER COLUMN
FLIP TOP AVAILABLE
TA2209-7
HEIGHT: 730 mm
or 600 x 600 mm
TA2209-1
HEIGHT: 730 mm
MAX TOP SIZE: 900 x 900 mm
TA2209-2
HEIGHT: 730 mm
or 650 x 650 mm
TA2209-3
HEIGHT: 730 mm
TA2209-6
HEIGHT: 730 mm
or 900 x 900 mm
FLOOR FIXED TABLE:
FIXING DETAILS OVERLEAF
TA2209-4
HEIGHT: 730 mm
or 900 x 900 mm
TA2209-5
HEIGHT: 730 mm
MAX TOP:
1800 x 1100 mm (elliptical) /
1600 x 900 mm (rectangular)
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
176
t
t
t
TA B L E S
PTA2209-5
HEIGHT: 1100 mm
or 700 x 700 mm
PTA2209-5 / TA2209-6
FLOOR FIXING DETAIL
PTA2209-4
HEIGHT: 1100 mm
or 700 x 700 mm
PTA2209-1
HEIGHT: 1100 mm
PTA2209-3
HEIGHT: 1100 mm
PTA2209-2
HEIGHT: 1100 mm
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
†
*
t
t
t
SOLID BEECH COLUMN I S ONLY AVAILABLE WITH A BRUSHED STAINLESS STEEL OR POLISHED STAINLESS STEEL B ASE
THE HEIGHT OF ANY PTA2209 TABLE WITH A SOLID BEECH COLUMN IS 1080 mm
177
FLIP TOP AVAILABLE
TA2216-4
HEIGHT: 500 mm
TA2216-2
HEIGHT: 730 mm
PTA2216-2
HEIGHT: 1100 mm
PTA2216-1
HEIGHT: 1100 mm
TA2216-3
HEIGHT: 730 mm
TA2216-1
HEIGHT: 730 mm
TA2216-5
HEIGHT: 730 mm
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
178
t
t
t
TA B L E S
FLIP TOP AVAILABLE
TA2202-2
HEIGHT: 730 mm
TA2202-1
HEIGHT: 730 mm
TA2202-3
HEIGHT: 730 mm
or 1000 x 1000 mm
PTA2202-1
HEIGHT: 1100 mm
PTA2202-2
HEIGHT: 1100 mm
PTA2202-3
HEIGHT: 1100 mm
or 800 x 800 mm
PTA2202-4
HEIGHT: 1100 mm
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
†
*
t
t
t
†
SOLID BEECH COLUMN I S ONLY AVAILABLE WITH A BRUSHED STAINLESS STEEL OR CHROME B ASE
THE HEIGHT OF THE PTA2202-1, PTA2202-2, AND PTA2202-3 WITH A VENEER COLUMN IS 1075 mm
179
FLIP TOP AVAILABLE
ADJUSTABLE FEET
TA2203-2
PTA2203-1
HEIGHT: 1100 mm
or 700 x 700 mm
HEIGHT: 730 mm
TA2203-1
HEIGHT: 730 mm
TA2203-3
HEIGHT: 730 mm
TA2203-4
HEIGHT: 730 mm
PTA2203-2
HEIGHT: 1100 mm
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
180
TA B L E S
FLIP TOP AVAILABLE
TA2217-1
HEIGHT: 730 mm
MAX TOP: 1500 mm diam. or 1100 x 1100 mm
TA2217-2
HEIGHT: 730 mm
TA2217-3
HEIGHT: 730 mm
MAX TOP: 1600 x 1000 mm
PTA2217-1
HEIGHT: 1100 mm
or 900 x 900 mm
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
181
TA2208-4
HEIGHT: 730 mm
TA2208-1
HEIGHT: 730 mm
TA2208-2
HEIGHT: 730 mm
or 1000 x 1000 mm
TA2208-3
HEIGHT: 730 mm
or 650 x 650 mm
TA2208-6
HEIGHT: 730 mm
or 1000 x 1000 mm
TA2208-5
HEIGHT: 730 mm
or 900 x 900 mm
t
t
t
t
t
t
t
t
t
t
t
t
t
182
t
TA B L E S
FLIP TOP AVAILABLE
TA2204-0
HEIGHT: 730 mm
TA2204-1
HEIGHT: 730 mm
TA2204-3
HEIGHT: 730 mm
TA2204-2
HEIGHT: 730 mm
or 900 x 900 mm
PTA2204-1
HEIGHT: 1100 mm
PTA2204-2
HEIGHT: 1100 mm
PTA2204-3
HEIGHT: 1100 mm
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
183
FLIP TOP AVAILABLE
TA2205-1
HEIGHT: 730 mm
TA2205-0
HEIGHT: 730 mm
or 650 x 650 mm
TA2205-2
HEIGHT: 730 mm
or 1000 x 1000 mm
TA2205-3
HEIGHT: 730 mm
TA2205-4
HEIGHT: 730 mm
or 900 x 900 mm
t
t
t
t
t
t
t
t
t
t
t
t
t
184
t
t
t
TA B L E S
PTA2205-1
HEIGHT: 1100 mm
PTA2205-2
HEIGHT: 1100 mm
MAX TOP: 700 mm DIAM.
PTA2205-3
HEIGHT: 1100 mm
or 700 x 700 mm
PTA2205-4
HEIGHT: 1100 mm
or 800 x 800 mm
PTA2205-5
HEIGHT: 1100 mm
PTA2205-6
HEIGHT: 1100 mm
PTA2205-7
HEIGHT: 1100 mm
or 800 x 800mm
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
185
FLIP TOP AVAILABLE
TA2206-1
HEIGHT: 730 mm
TA2206-2
HEIGHT: 730 mm
PTA2206-3
HEIGHT: 1100 mm
TA2206-3
HEIGHT: 730 mm
PTA2206-1
HEIGHT: 1100 mm
PTA2206-2
HEIGHT: 1100 mm
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
186
t
t
t
TA B L E S
FLIP TOP AVAILABLE
TA2210-2
HEIGHT: 730 mm
MAX TOP SIZE: 700 mm diameter
TA2210-1
HEIGHT: 730 mm
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
187
FLIP TOP AVAILABLE
TA2211-2
HEIGHT: 730 mm
TA2211-1
HEIGHT: 730 mm
TA2211-3
HEIGHT: 730 mm
TA2211-4
HEIGHT: 730 mm
or 600 x 600 mm
t
t
t
t
t
t
t
t
t
t
t
188
t
TA B L E S
PTA2213-2
HEIGHT: 1100 mm
or 700 x 700 mm
TA2213-2
PTA2213-1
HEIGHT: 1100 mm
TA2213-1
HEIGHT: 730 mm
HEIGHT: 730 mm
TA2213-3
HEIGHT: 730 mm
TA2213-4
HEIGHT: 730 mm
or 1400 x 1400 mm
ADJUSTABLE FEET
t
t
t
t
189
TA2214-1
HEIGHT: 730 mm
WHEEL DETAIL
t
t
t
t
t
t
t
t
t
t
t
190
t
t
TA B L E S
FLIP TOP
FLIP ST15
720
THE FLIP ST15 TABLE IS MANUFACTURED FROM HARD WEARING TUBULAR STEEL WITH ADUSTABLE FEET FOR ADDED CONVENIENCE AND STABILITY. THE TABLE HAS A ROBUST AND USER-FRIENDLY FLIP MECHANISM WHICH ALLOWS THE TABLE TOP TO TURN
90º INTO A VERTICAL POSITION. THE TABLE FRAME CAN BE FINISHED IN CHROME OR ERP COATED IN ONE OF A VAST SELECTION
OF COLOURS. THE TABLE CAN ALSO BE SUPPLIED WITH LOCKING CASTORS. A WIDE RANGE OF SOLID BEECH, ASH, HARDWOOD,
MDF AND OTHER TABLE TOPS IS SHOWN ON THE BACK PAGE OF THE DIRECTORY.
191
TA6501
THE TA6501 TABLE CAN BE FINISHED IN BLACK ERP,
CHROME OR STAINLESS STEEL.
720
TA2218-1
730
MAX.TOP SIZE 900 mm diam. or 700 x 700 mm
PTA2218-1
1100
MAX.TOP SIZE 700 mm diam. or 600 x 600 mm
THE TA2218-1 AND PTA2218-1 TABLES CAN BE FINISHED IN BLACK ERP, COLOUR ERP,
CHROME, BRUSHED STAINLESS STEEL OR POLISHED STAINLESS STEEL.
192
FLOOR FIXING DETAIL
TA B L E S
THE TA6502 TABLE IS MANUFACTURED WITH A
HARD WEARING METAL BASE AND COLUMN,
WHICH CAN BE CHROMED OR BLACK ERP
COATED. THE TABLE HAS A BUILT-IN LIFT
MECHANISM TO ADJUST THE HEIGHT. A WIDE
SELECTION OF SOLID BEECH, ASH, HARDWOOD, MDF AND OTHER TABLE TOPS IS
SHOWN ON THE BACK PAGE OF THE DIRECTORY.
TA6502
7201100
MAX.TOP SIZE 800 mm diameter
THE TA6503 TABLE IS MANUFACTURED WITH A
HARD WEARING STAINLESS STEEL BASE AND COLUMN. THE TABLE HAS A BUILT-IN LIFT MECHANISM
TO ADJUST THE HEIGHT. A WIDE SELECTION OF
SOLID BEECH, ASH, HARDWOOD, MDF AND OTHER
TABLE TOPS IS SHOWN ON THE BACK PAGE OF
THE DIRECTORY.
TA6503
7201100
193
FT4601
720
MIN.TOP SIZE 1180 x 600 mm
THE FT4601 AND FT4602 FOLDING TABLES ARE CONSTRUCTED WITH A HARD
WEARING METAL FRAME WHICH CAN BE CHROMED OR ERP COATED. THE TABLES HAVE A SIMPLE FOLDING MECHANISM WHICH ALLOWS THE LEGS TO BE
TUCKED AWAY AND THE FLATTENED TABLES STACKED NEATLY. A WIDE RANGE
OF SOLID BEECH, ASH, HARDWOOD, MDF AND OTHER TABLE TOPS IS SHOWN
ON THE BACK PAGE OF THE DIRECTORY.
FT4602
720
194
TA B L E S
FT4603
720
THE FT4603 AND FT4604 FOLDING TABLES ARE CONSTRUCTED WITH A HARD WEARING
METAL FRAME: FT4603 CAN BE CHROMED OR ERP COATED, FT4604 IS ONLY AVAILABLE IN
ERP. THE TABLES HAVE A SIMPLE FOLDING MECHANISM WHICH ALLOWS THE LEGS TO BE
TUCKED AWAY AND THE FLATTENED TABLES STACKED NEATLY. A WIDE RANGE OF SOLID
BEECH, ASH, HARDWOOD, MDF AND OTHER TABLE TOPS IS SHOWN ON THE BACK PAGE OF
THE DIRECTORY.
FT4604
720
195
TAEO04
711
or 1200 mm diam.
COFFEE HEIGHT
AVAILABLE
THE TAEO03 AND TAEO04 TABLES ARE MANUFACTURED WITH A HARD WEARING STEEL TUBE COLUMN AND CAST BASE, WHICH CAN
BE SUPPLIED IN A CHROME OR ERP COATED FINISH. BOTH TABLES ARE AVAILABLE IN COFFEE, DINING AND POSEUR HEIGHTS. THERE
IS A WIDE SELECTION OF SOLID BEECH, ASH, HARDWOOD, MDF AND OTHER TABLE TOPS ON THE BACK PAGE OF THE DIRECTORY.
TAEO03
711
COFFEE HEIGHT
AVAILABLE
196
TA B L E S
TAEO05
711
COFFEE HEIGHT
AVAILABLE
or 900 mm diam.
THE TAEO05 AND TAEO06 TABLES ARE MANUFACTURED FROM HARD WEARING STEEL
CHROME OR ERP COATED FINISH. THERE IS
A WIDE SELECTION OF SOLID BEECH, ASH,
HARDWOOD, MDF AND OTHER TABLE TOPS
TAEO06
711
TAEO06 IS NOT AVAILABLE
IN COFFEE TABLE HEIGHT
TAEO07
711
TAEO08
711
197
TAEO10
730
or 1200 mm diam.
TAEO09
730
TAEO12
730
COFFEE HEIGHT
AVAILABLE
or 1200 mm diam.
THE TAEO12 AND TAEO13 TABLES ARE MANUFACTURED WITH
A HARD WEARING STEEL TUBE COLUMN AND CAST BASE,
WHICH CAN BE SUPPLIED IN A CHROME OR ERP COATED FINISH. THERE IS A WIDE SELECTION OF SOLID BEECH, ASH,
HARDWOOD, MDF AND OTHER TABLE TOPS ON THE BACK
TAEO13
730
198
TA B L E S
TAEO11
711
MAX.TOP SIZE 1800 x 1000 mm,
1500 mm square or 1500 mm diam.
THE TAEO11 TABLE IS MANUFACTURED
FROM HARD WEARING STEEL TUBE, WHICH
CAN BE SUPPLIED IN A CHROME OR ERP
COATED FINISH. THERE IS A WIDE SELECTION OF SOLID BEECH, ASH, HARDWOOD,
MDF AND OTHER TABLE TOPS ON THE BACK
TA0501
730
MAX.TOP SIZE 1500 x 760 or 1100 mm diam.
THE TA0501 TABLE IS MANUFACTURED FROM
HARD WEARING STEEL TUBE, WHICH CAN
BE SUPPLIED IN A CHROME OR ERP COATED
FINISH. THERE IS A WIDE SELECTION OF
SOLID BEECH, ASH, HARDWOOD, MDF AND
OTHER TABLE TOPS ON THE BACK PAGE OF
THE DIRECTORY.
199
HIGH (POSEUR) VERSION
CT2001
510
TOP SIZE 400 x 400 mm
RECTANGULAR VERSION
THE CT2001 COFFEE TABLE IS MANUFACTURED FROM DURABLE MDF WHICH IS LAMINATED FOR A CLEAN AND HARD WEARING
FINISH. THE CT2004 COFFEE TABLE (PICTURED BELOW) HAS A ROBUST STEEL BASE WHICH CAN BE CHROMED OR POWDER
COATED. THE TOP IS MADE FROM LAMINATED MDF.
BOTH THE CT2001 AND CT2004 TABLES CAN BE MANUFACTURED ENTIRELY TO SPECIFICATION IN ALMOST ANY SHAPE OR SIZE.
SQUARE OR RECTANGULAR VARIATIONS CAN BE MADE, AND THE HEIGHT CAN BE CHANGED TO SUIT ANY REQUIREMENT FROM
COFFEE TABLE TO POSEUR. THERE IS A WIDE VARIETY OF LAMINATES AVAILABLE FOR A DISTINCTIVE FINISH.
ELONGATED VERSION
CT2004
450
200
TA B L E S
CT2005
455
(OTHER SIZES AVAILABLE ON REQUEST)
CT2006
455
THE CT2005 AND CT2006 COFFEE TABLES ARE MANUFACTURED WITH A ROBUST STEEL BASE WHICH CAN BE ERP
COATED OR CHROMED. THE TABLE TOP CAN BE TOUGHENED GLASS (AS ILLUSTRATED) OR CHOSEN FROM A SELECTION OF LAMINATED MDF AND SOLID WOOD TOPS
(OTHER SIZES AVAILABLE ON REQUEST)
THE CT2003 COFFEE TABLE IS
MANUFACTURED WITH A ROBUST STEEL BASE WHICH CAN
BE ERP COATED OR CHROMED.
THE TABLE TOP CAN BE CHOSEN
FROM A SELECTION OF LAMINATED MDF AND SOLID WOOD
TOPS ON THE BACK PAGE OF
THE DIRECTORY.
CT2003
415
(OTHER SIZES AVAILABLE
ON REQUEST)
CT0501
415
600
1000
THE CT0501 COFFEE TABLE IS MANUFACTURED WITH A ROBUST METAL FRAME
WHICH IS FULLY UPHOLSTERED IN SALPA
SOFT LEATHER. IT HAS A TRANSPARENT
TEMPERED GLASS TOP.
201
TA0937
710
TA0935
710
MAX. TOP
1200 x 760 mm
MAX. TOP 800 x 800 mm
TA0936
710
MAX. TOP
800 mm diam.
THE TA0935, TA0936 AND TA0937 TABLE BASES ARE AVAILABLE IN BLACK ERP.
TA0934
720
TA0938
720
MAX. TOP 800 mm diam.
TA0929
720
THE TA0929 AND TA0938 TABLE BASES ARE SUPPLIED IN A STAINLESS STEEL FINISH, TA0934 IS SUPPLIED IN CHROME.
202
SOFAS TUBS & CUBES
204 /
205
206 /
207
208 /
209
210 /
211
212 /
213
214 /
215
216
PHOTOGRAPH BY PAUL ZANRE
SO5004 (2)
880
450
920
THE SO5004 SOFAS AND CU5001 LOW STOOL ARE MANUFACTURED FROM QUALITY MATERIALS TO WITHSTAND THE RIGOURS OF A
BUSY LEISURE ENVIRONMENT. THESE ITEMS ARE DESIGNED TO BE USED IN COMBINATION WITH EACH OTHER FOR GREATER FLEXIBILITY OF LAYOUT AND DESIGN. THEY CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
CU5001
SO5004 (1)
440
880
450
920
920
950
SO5005
880
450
920
2000
THE SO5005 SOFA IS MANUFACTURED FROM QUALITY MATERIALS TO WITHSTAND THE RIGOURS
OF A BUSY LEISURE ENVIRONMENT. IT CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD
204
1780
1750
S O FA S T U B S & C U B E S
SOMORRIS01
705
740
395
845 /
1365 /
1855
THE SOMORRIS01 SOFA IS MANUFACTURED WITH A HARD
WEARING STEEL FRAME WHICH CAN BE SUPPLIED IN
CHROME OR AN ERP FINISH. IT CAN BE UPHOLSTERED IN
AC4508
880
450
950
1750
THE AC4508 CHAIR IS MANUFACTURED FROM
QUALITY MATERIALS TO WITHSTAND THE
RIGOURS OF A BUSY LEISURE ENVIRONMENT.
IT CAN BE UPHOLSTERED IN ANY CONTRACT
STANDARD FABRIC, VINYL OR LEATHER. THIS
MODEL IS ALSO AVAILABLE AS A 2 SEAT SOFA.
SO4515
THE SO4515 SOFA IS MANUFACTURED FROM QUALITY MATERIALS TO WITHSTAND
THE RIGOURS OF A BUSY LEISURE ENVIRONMENT. IT CAN BE UPHOLSTERED IN
715
460
920
2335
205
SO2409
880
450
THE SO2409 SOFA IS MANUFACTURED FROM QUALITY MATERIALS TO WITHSTAND THE RIGOURS OF A BUSY
LEISURE ENVIRONMENT. IT CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
920
2000/
1700/
1600/
890
SO4516
880
460
920
2030 /
1780 /
1650 /
940
THE SO4516 SOFA IS MANUFACTURED FROM QUALITY MATERIALS TO WITHSTAND THE RIGOURS OF A BUSY LEISURE
ENVIRONMENT. IT CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
SO4505
660
450
790
1270/
750
THE SO4505 SOFA IS MANUFACTURED FROM QUALITY MATERIALS TO WITHSTAND THE RIGOURS OF A BUSY LEISURE ENVIRONMENT. IT CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
206
TU4502
660
460
640
690
CU4501
420
SO4507
425
425
660
460
THE SO4507 SOFA, TU4502 TUB CHAIR AND CU4501 LOW STOOL ARE MANUFACTURED FROM QUALITY
MATERIALS TO WITHSTAND THE RIGOURS OF A BUSY LEISURE ENVIRONMENT. THEY CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
640
1200
THE SO4508 SOFA IS MANUFACTURED FROM QUALITY MATERIALS TO
WITHSTAND THE RIGOURS OF A BUSY LEISURE ENVIRONMENT. IT
CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL
OR LEATHER. THE SO4508 IS ALSO AVAILABLE AS A SOFA BED.
SO4508
810
460
840
2010/
1750/
1580/
910
207
SO4518 (1)
890
460
920
2340
SO4518 (2)
890
460
920
1420
THE SO4518 SOFAS AND CHEZ LONGUE ARE MANUFACTURED FROM QUALITY MATERIALS TO WITHSTAND THE RIGOURS OF A BUSY
LEISURE ENVIRONMENT. THESE ITEMS ARE DESIGNED TO BE USED IN COMBINATION WITH EACH OTHER FOR GREATER FLEXIBILITY
OF LAYOUT AND DESIGN. THEY CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
SO4518 (3)
890
460
920
1830
208
SO2407
880
460
920
2000/
1700/
1600/
890
SO2405a
940
460
840
1880/
1680/
1370/
840
THE SO2405a SOFA IS MANUFACTURED FROM QUALITY MATERIALS TO WITHSTAND THE RIGOURS OF A BUSY LEISURE
ENVIRONMENT. IT CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER. THE SO2405a IS ALSO
AVAILABLE AS A SOFA BED.
SO4519
890
460
920
2030 /
1780 /
1650 /
940
209
SO4513
940
450
THE SO4513 SOFA IS MANUFACTURED FROM QUALITY MATERIALS TO WITHSTAND THE RIGOURS OF A
BUSY LEISURE ENVIRONMENT. IT CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL
OR LEATHER. THE SO4513 IS ALSO AVAILABLE AS A SOFA BED.
910
2080/
1830/
1700/
1020
SO4520
740
460
920
2080 /
1575 /
810
THE SO4520 SOFA IS MANUFACTURED FROM QUALITY MATERIALS TO WITHSTAND THE RIGOURS OF A BUSY
LEISURE ENVIRONMENT. IT CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
SO4517
850
460
920
THE SO4517 SOFA IS MANUFACTURED FROM QUALITY MATERIALS TO WITHSTAND THE RIGOURS OF
A BUSY LEISURE ENVIRONMENT. IT CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC,
VINYL OR LEATHER.
210
1955 /
1700 /
1575 /
890
SO4501
890
450
910
2010/
1750/
1650/
910
ENVIRONMENT. IT CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER. THE SO4501 IS
ALSO AVAILABLE AS A SOFA BED.
SO4514
890
460
920
2000 /
1750 /
1625 /
910
THE SO4514 SOFA IS MANUFACTURED FROM QUALITY MATERIALS TO WITHSTAND THE
RIGOURS OF A BUSY LEISURE ENVIRONMENT. IT CAN BE UPHOLSTERED IN ANY
SO4502
890
460
910
2220 /
1860 /
1750 /
1070
ENVIRONMENT. IT CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER. THE SO4502 IS
ALSO AVAILABLE AS A SOFA BED.
211
PLAIN UPHOLSTERY (BUTE)
TUHARDY02
TUHARDY01
650
730
480
610
670
THE ‘HARDY’ TUB CHAIRS ARE MANUFACTURED
FROM HIGH QUALITY, HARD WEARING MATERIALS
FOR MAXIMUM DURABILITY. THEY CAN BE
LS2003
650
730
480
610
670
WRITING PALETTE OPTION
CUHARDY02
425
425
410
410
410
410
THESE CUBES / LOW STOOLS ARE
MANUFACTURED FROM HIGH
QUALITY, HARD WEARING MATERIALS
FOR MAXIMUM DURABILITY. THEY
CAN BE UPHOLSTERED IN ANY
CONTRACT STANDARD FABRIC, VINYL
OR LEATHER.
LS2003
CUHARDY01
425
425
410
212
410
410
410
SOHARDY01
730
460
720
1435 /
1955
THE ‘HARDY’ SOFAS ARE MANUFACTURED FROM HIGH QUALITY,
HARD WEARING MATERIALS FOR MAXIMUM DURABILITY. THEY
CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC,
VINYL OR LEATHER.
THE CU2002, CU2003 AND CU2004 BLOCKS / LOW STOOLS CAN BE MADE TO
SPECIFICATION IN ALMOST ANY SHAPE OR SIZE; ROUND, SQUARE OR
RECTANGULAR. THEY CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD
CU2003
450
1005
1005
CU2002
450
1005
1005
LS2006
460
LS2005
CU2004
400
460
400
900
450
400
410
910
THE LS2005 AND LS2006 LOW STOOLS CAN BE FINISHED
IN ANY CONTRACT STANDARD LAMINATE, AND HAVE
UPHOLSTERED SEAT PADS FOR ADDED COMFORT.
213
AC4503
610
830
475
865
770
AC4504
600
835
470
860
760
AC4505
610
830
470
860
780
THESE ARMCHAIRS ARE MANUFACTURED FROM HIGH QUALITY,
HARD WEARING MATERIALS FOR MAXIMUM DURABILITY. THEY
CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC,
VINYL OR LEATHER.
SCESQ01
670
810
460
860
910
SOESQ01
670
810
460
860
214
1485 /
1850 /
2030
THE ‘ESQUIRE’ ARMCHAIR AND SOFA ARE MANUFACTURED FROM HIGH QUALITY, HARD WEARING MATERIALS FOR
MAXIMUM DURABILITY. THEY CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER.
LC1501
880
460
630
660
LC1502
770
460
630
660
THE LC1501 AND LC1502 CHAIRS ARE MANUFACTURED
FROM HIGH QUALITY, HARD WEARING MATERIALS FOR
MAXIMUM DURABILITY. THEY CAN BE UPHOLSTERED IN
LC4003
700
440
750
800
THE LC4003 CHAIR IS MANUFACTURED
FROM HIGH QUALITY, HARD WEARING
MATERIALS FOR MAXIMUM DURABILITY.
IT HAS A WENGE FRAME AND CAN BE
UPHOLSTERED IN ANY CONTRACT
LC3201
710
360
800
610
THE LC3201 CHAIR IS MANUFACTURED
IT CAN BE UPHOLSTERED IN ANY
OR LEATHER.
215
TU2001
710
475
640
660
THE TU2001 CHAIR IS MANUFACTURED FROM HIGH
QUALITY, HARD WEARING MATERIALS FOR MAXIMUM
DURABILITY. IT CAN BE UPHOLSTERED IN ANY
THE TU3201 CHAIR IS MANUFACTURED
IT CAN BE UPHOLSTERED IN ANY
OR LEATHER.
TU3201
780
450
710
640
SO9401
770
460
505
1180
TU9401
770
460
505
590
THE TU9401 CHAIR AND SO9401 SOFA ARE
MANUFACTURED FROM HIGH QUALITY, HARD WEARING
MATERIALS FOR MAXIMUM DURABILITY. THEY CAN BE
VINYL OR LEATHER. A 3-SEAT SOFA IS ALSO AVAILABLE.
216
PUB CLUB & DISCO
218
219
220
221
222
PHOTOGRAPH BY PAUL ZANRE / DESIGN BY DAVIDSON DESIGN
AC3404
CH3404
590
800
810
440
670
740
480
540
500
OT3401
410
450
590
THE AC3404 AND CH3404 CHAIRS AND 0T3401 LOW STOOL ARE MANUFACTURED WITH A ROBUST ALUMINIUM BASE. THE CUSHIONED SHELL CAN BE UPHOLSTERED IN ANY FABRIC, VINYL OR LEATHER- SUBJECT TO THE ELASTICITY OF THE MATERIAL.
AC6617
780
450
590
610
AC6613
780
430
560
610
THE AC6613 AND AC6617 CHAIRS ARE MANUFACTURED WITH A ROBUST STEEL BASE WHICH CAN BE CHROMED OR ALUMINIUM ERP
COATED FOR A DURABLE FINISH. THE CUSHIONED FOAM SHELL CAN BE UPHOLSTERED IN ANY FABRIC, VINYL OR LEATHER- SUBJECT TO THE ELASTICITY OF THE MATERIAL.
OLA: DESIGN SINTESI
218
PUB CLUB & DISCO
TU1002
850
400
500
450
SWIVEL BASE
LS2203
540
400
400
THE LS2203 LOW STOOL IS AVAILABLE WITH AN
ERP COATED, CHROME, SATIN CHROME OR BRASS
BASE, WITH AN UPHOLSTERED SEAT.
THE TU1002 CHAIR HAS A CHROME SWIVEL BASE AND IS
FULLY UPHOLSTERED IN CONTRACT STANDARD FABRIC,
VINYL OR LEATHER.
TU1001
750
460
450
600
SWIVEL BASE
LS0501
480
310
310
THE LS0501 LOW STOOL IS UPHOLSTERED IN
SALPA SOFT LEATHER, THE COLOURS AVAILABLE
ARE BLACK, DARK BROWN, BURGUNDY, NATURAL,
GREEN, RED, WHITE AND CREAM.
THE TU1001 CHAIR HAS A CHROME SWIVEL BASE AND IS
FULLY UPHOLSTERED IN CONTRACT STANDARD FABRIC,
VINYL OR LEATHER.
219
HS2221
990
780
400
400
HS2220
820
400
THE HS2220 AND HS2221 HIGH STOOLS ARE MANUFACTURED WITH A ROBUST METAL BASE WHICH IS AVAILABLE IN A STAINLESS STEEL FINISH. THE
CUSHIONED SEAT CAN BE UPHOLSTERED IN ANY FABRIC, VINYL OR
LEATHER.
HS2224
HS2225
800
1040
800
400
400
400
400
THE HS2224 AND HS2225 HIGH STOOLS
ARE MANUFACTURED WITH A ROBUST
METAL BASE WHICH IS AVAILABLE IN A
STAINLESS STEEL FINISH. THE CUSHIONED
SEAT CAN BE UPHOLSTERED IN ANY FABRIC, VINYL OR LEATHER.
HS2226
775
350
220
400
350
ROBUST METAL FRAME WHICH IS AVAILABLE IN A
CHROME OR SATIN CHROME FINISH. THE CUSHIONED
SEAT CAN BE UPHOLSTERED IN ANY FABRIC, VINYL OR
LEATHER.
PUB CLUB & DISCO
HS2229
1090
800
400
400
LS2205
500
325
325
HS2219
800
325
325
THE HS2229, HS2219 AND LS2205 STOOLS ARE MANUFACTURED WITH A
ROBUST METAL FRAME WHICH IS AVAILABLE IN A CHROME OR SATIN
CHROME FINISH. THE CUSHIONED SEAT CAN BE UPHOLSTERED IN ANY
THE CU2001 LOW STOOL HAS CHROME OR ERP COATED FEET AND CAN
BE UPHOLSTERED IN ANY FABRIC, VINYL OR LEATHER.
CU2001
440
400
400
HS2222
800
400
400
THE HS2222 HIGH STOOL AND LS2204 LOW
STOOL ARE MANUFACTURED WITH A ROBUST
METAL BASE WHICH IS AVAILABLE IN CHROME
OR SATIN CHROME FOR A DURABLE FINISH.
THE CUSHIONED SEAT CAN BE UPHOLSTERED
IN ANY FABRIC, VINYL OR LEATHER.
LS2204
500
400
400
221
CH1005
950
400
870
SWIVEL SEAT
LS1001
390
490
600
SWIVEL SEAT
THE CH1005 CHAIR AND LS1001 LOW STOOL ARE FULLY UPHOLSTERED AND CAN BE SUPPLIED IN
ANY CONTRACT STANDARD FABRIC, VINYL OR LEATHER (SUBJECT TO THE ELASTICITY OF THE MATERIAL). THEY BOTH HAVE A ROBUST STEEL BASE WHICH IS SUPPLIED IN A CHROME FINISH.
TU2401
720
470
660
760
SWIVEL SEAT
222
920
THE TU2401 CHAIR IS MANUFACTURED WITH A HARD WEARING
METAL BASE, WHICH IS CHROMED
FOR A DURABLE FINISH. THE FULLY
CUSHIONED SHELL CAN BE UPHOLSTERED IN ANY FABRIC, VINYL OR
LEATHER.
LLOYD LOOM
224
225
226
PHOTOGRAPH BY PAUL ZANRE / DESIGN BY FITZGERALD & A SSOCIATES
CH0948
1050
450
600
THE AC0929 AND CH0948 CHAIRS ARE MADE FROM
HIGH QUALITY MATERIALS USING TRADITIONAL LLOYD
LOOM TECHNIQUES TO WITHSTAND THE RIGOURS OF
A BUSY LEISURE ENVIRONMENT.
AC0929
1050
450
670
CH0944
1050
450
620
470
AC0926
1050
450
660
224
470
530
560
L L OY D L O O M
CH0947
860
450
550
450
AC0928
860
450
600
540
AC0943
845
465
520
515
THE CH0946 AND AC0943 CHAIRS ARE MADE FROM
CH0946
845
460
510
430
225
AC0927
910
450
650
THE AC0927 CHAIR IS MADE FROM HIGH
QUALITY MATERIALS USING TRADITIONAL
LLOYD LOOM TECHNIQUES TO WITHSTAND
THE RIGOURS OF A BUSY LEISURE ENVIRONMENT.
CH0945
950
450
580
450
THE CH0945 CHAIR IS MADE FROM HIGH
QUALITY MATERIALS USING TRADITIONAL
LLOYD LOOM TECHNIQUES TO WITHSTAND
THE RIGOURS OF A BUSY LEISURE ENVIRONMENT.
226
590
ALFRESCO
228 /
229
230 /
231
232 /
233
234 /
235
236 /
237
238 /
239
240 /
241
242
PHOTOGRAPH BY PATRICK CLINE / DESIGN BY R I NTERIORS
LS0905
450
350
470
OUTDOOR USE
BS0901
TA0928
750
750
OUTDOOR USE
1200
THE TA0928 TABLE, BS0901
BENCH AND LS0905 LOW
STOOL ARE AVAILABLE IN A
GREY OR ALUMINIUM
COLOURED FINISH. THEY
HAVE DURABLE TEAK SLATS
WHICH ARE SUITABLE FOR
OUTDOOR USE.
450
350
1080
ALUMINIUM COLOUR FRAME FINISH
CH0994
850
445
595
AC0958
850
445
595
570
THE AC0958 AND CH0994 CHAIRS ARE AVAILABLE IN A GREY
FRAME WITH BEIGE WEAVE OR ALUMINIUM FRAME WITH JAVA
WEAVE.
THE AC0957 AND CH0995 CHAIRS HAVE AN ALUMINIUM FRAME
AND DURABLE TEAK SLATS. ALL OF THESE CHAIRS ARE STACKABLE AND ARE SUITABLE FOR OUTDOOR USE.
AC0957
850
445
595
570
OUTDOOR USE
CH0995
850
445
595
228
480
STACKING CHAIR
480
OUTDOOR USE
HS0954
ALFRESCO
AC0947
810
800
455
410
410
610
540
OUTDOOR USE
STACKING CHAIR
LS0906
460
350
470
THE AC0947 CHAIR HAS A ROBUST FRAME WHICH IS FINISHED
IN MOCCA OR BEIGE WEAVE. THE HS0954 AND LS0906
STOOLS ARE FINISHED IN A JAVA WEAVE. ALL ARE SUITABLE
FOR OUTDOOR USE.
CH0993
860
455
OUTDOOR USE
550
450
STACKING CHAIR
AC0954
860
455
550
575
STACKING CHAIR
THE AC0954 AND CH0993 CHAIRS HAVE A ROBUST
FRAME WHICH IS FINISHED IN JAVA WEAVE.
229
CH0908
HS0905
780
970
450
600
490
STACKING CHAIR
ITEMS CH0908, AC0920 AND HS0905 HAVE A HIGH QUALITY ALUMINIUM FRAME WITH
WEAVE SEAT AND BACK. THE WEAVE IS AVAILABLE IN A VARIETY OF COLOURS: BEIGE,
GREEN, BLUE, BURGUNDY AND BLACK (CH0908 IS ONLY AVAILABLE IN BEIGE).
AC0920
600
750
445
570
530
STACKING CHAIR
230
760
560
440
CH0910
1015
830
760
500
460
510
390
OUTDOOR USE
390
OUTDOOR USE
ALFRESCO
HS0907
THE CH0910 CHAIR AND HS0907 HIGH STOOL ARE CONSTRUCTED FROM
HIGH QUALITY, HARD WEARING ALUMINIUM.
HS0943
815
780
390
380
OUTDOOR USE
THE HS0943 AND HS0945 HIGH STOOLS HAVE A
HIGH QUALITY ALUMINIUM FRAME AND SEAT.
HS0945
770
395
395
OUTDOOR USE
231
CH0909
HS0906
780
970
480
550
760
560
450
440
STACKING CHAIR
OUTDOOR USE
AC0921
660
750
445
570
530
STACKING CHAIR
ITEMS CH0909,AC0938, AC0921 AND HS0906 HAVE A HIGH QUALITY ALUMINIUM FRAME AND ALUMINIUM SLATTED SEAT AND BACK.
AC0938
640
780
450
600
490
STACKING CHAIR
AC0939
820
430
580
550
OUTDOOR USE
232
THE AC0939 ARMCHAIR HAS A HARD
WEARING ALUMINIUM FRAME WITH
TEAK BACK, SEAT AND ARMRESTS.
HS0944
CH0981
ALFRESCO
970
780
760
560
480
550
440
450
STACKING CHAIR
OUTDOOR USE
AC0919
750
445
570
530
STACKING CHAIR
ITEMS CH0981,AC0919 AND HS0944 HAVE A HIGH QUALITY ALUMINIUM FRAME WITH TEAK SLATTED SEAT AND BACK.
CH0979
AC0940
695
790
870
460
570
450
570
440
580
STACKING CHAIR
STACKING CHAIR
ITEMS CH0979 AND AC0940 HAVE A HIGH QUALITY ALUMINIUM FRAME
WITH TEAK SLATTED SEAT AND BACK.
OUTDOOR USE
233
CH0980
890
460
560
430
STACKING CHAIR
(2-3 CHAIRS ONLY)
OUTDOOR USE
AC0941
890
460
560
STACKING CHAIR
(2-3 CHAIRS ONLY)
ITEMS CH0980 AND AC0941 HAVE A BAMBOO FINISH FRAME AND CAN BE UPHOLSTERED IN EITHER DURABLE MESH OR COLOUR
NYLON WEAVE. THE TA0924 TABLE IS SHOWN WITH AN OUTDOOR TOP, SEE PAGE 236 FOR A SELECTION OF THESE TOPS.
BURGUNDY
(DURABLE MESH)
IVORY
(DURABLE MESH)
GREEN/CREAM
(NYLON WEAVE)
RED/CREAM
(NYLON WEAVE)
OUTDOOR USE
TA0924
700
Max. top 800 diameter
or 800 x 800 mm
234
550
ALFRESCO
CH0982
885
460
545
430
STACKING CHAIR
(2-3 CHAIRS ONLY)
ITEMS CH0982 AND AC0942 HAVE A BAMBOO FINISH FRAME AND
DURABLE MESH UPHOLSTERY. THE COLOURS AVAILABLE ARE BURGUNDY, BEIGE AND BLACK/GREY.
OUTDOOR USE
AC0942
825
450
590
580
STACKING CHAIR
(2-3 CHAIRS ONLY)
AC0956
800
440
570
OUTDOOR USE
625
THE AC0956 CHAIR HAS A HARD WEARING BAMBOO
FRAME WITH A BEIGE WEAVE FINISH.
235
AC6201
650
760
455
580
STACKING CHAIR
CH6201
805
455
585
OUTDOOR USE
THE AC6201 AND CH6201 CHAIRS HAVE A MATT ALUMINIUM
FRAME WITH POLYPROPYLENE SHELL. THE AVAILABLE SHELL
COLOURS ARE WHITE, BLUE, SALMON, BLACK, EMERALD, IVORY
AND RED.
AC3313
835
470
550
535
STACKING CHAIR
OUTDOOR USE
THE AC3313 CHAIR HAS A MATT ALUMINIUM FRAME
WITH POLYAMIDE SHELL. THE AVAILABLE SHELL
COLOURS ARE STONE, LIGHT ORANGE, LIGHT BLUE,
MARINE BLUE, LIGHT GREEN, DARK GREEN, GARNET
AND BLACK.
236
600
500
STACKING CHAIR
670
780
425
510
580
STACKING CHAIR
ALFRESCO
AC0918
OUTDOOR USE
THE AC0918 CHAIR HAS A HIGH QUALITY ALUMINIUM FRAME WITH POLYPROPYLENE
SEAT AND BACK. THE AVAILABLE SHELL COLOURS ARE BLUE, GREY AND GREEN.
CH3307
810
460
550
OUTDOOR USE
480
STACKING CHAIR
AC3304
810
460
550
560
STACKING CHAIR
THE CH3307 AND AC3304 CHAIRS HAVE A HIGH QUALITY ALUMINIUM FRAME WITH
POLYPROPYLENE SEAT AND BACK. THE AVAILABLE COLOURS ARE IVORY, YELLOW, ORANGE, BLUE, GREEN, BORDEAUX, BROWN, GREY AND BLACK.
237
PO0901
1100
TA0914
TA0904
710
710
OUTDOOR USE
MAX.TOP SIZE 700 x 700 mm or 700 mm diam.
TA0905
THESE TABLES ARE CONSTRUCTED FROM HIGH QUALITY,
HARD WEARING ALUMINIUM. THEY CAN BE SUPPLIED WITH A
CHOICE OF TABLE TOPS: OPTIONS INCLUDE ALUMINIUM
(INOX) TOPS, TEAK TOPS AND SPECIAL OUTDOOR MELAMINE
TOPS AS SHOWN ON PAGES 235 AND 236.
710
OUTDOOR USE
TA0926
TA0925
710
710
TOP SIZE 600 or 700 mm diam.
TOP SIZE 700 / 800 mm
(square or diameter)
TA0927
710
238
ALFRESCO
TA0921
710
OUTDOOR USE
TA0922
TA0923
710
710
or 700 mm diam.
ALL THE TABLES SHOWN ON THIS PAGE ARE CONSTRUCTED FROM HIGH QUALITY ALUMINIUM, AND CAN BE SUPPLIED WITH A CHOICE OF
TABLE TOPS: OPTIONS INCLUDE ALUMINIUM (INOX) TOPS, TEAK TOPS AND SPECIAL OUTDOOR MELAMINE TOPS AS SHOWN ON PAGES 235
AND 236.
TA0930, TA0931 AND TA0932 ARE SHOWN IN GREY WITH TEAK DETAILING, THEY ARE ALSO AVAILABLE IN ALUMINIUM AND TEAK.
TA0930
710
TA0931
710
TOP SIZE 700 mm
(square or diameter)
TOP SIZE 600 or 700 mm diam.
TA0932
710
OUTDOOR USE
239
TA0933
750
800
800
OUTDOOR USE
THE TA0933 TABLE HAS A DURABLE FRAME WHICH IS AVAILABLE
IN A GREY OR ALUMINIUM FINISH AND A TEAK SLATTED TOP.
TA0919
745
THE TA0920 AND TA0919 TABLES ARE MANUFACTURED FROM HIGH QUALITY
SOLID TEAK (ROBINA WOOD). WE RECOMMEND THAT ANY TEAK PRODUCTS
SHOULD BE TREATED REGULARLY WITH A SUITABLE TEAK OIL TO MAINTAIN
APPEARANCE AND DURABILITY WHILST BEING USED EXTERNALLY.
TA0920
745
240
TOP SIZE 800 x 800 mm or 850 mm diam.
OUTDOOR USE
TA0916
ALFRESCO
730
or 800 mm diam.
FLIP TOP BASE
THE TA0916 TABLE IS CONSTRUCTED FROM HIGH QUALITY, HARD WEARING
ALUMINIUM. THE TABLE HAS A
FLIP-TOP MECHANISM AND
THE BASE IS DESIGNED TO
NEST WITH OTHER TA0916
BASES FOR EFFICIENT USE OF
SPACE. IT CAN BE SUPPLIED
WITH A CHOICE OF TABLE
TOPS: OPTIONS INCLUDE ALUMINIUM (INOX) TOPS, TEAK
TOPS AND SPECIAL OUTDOOR MELAMINE TOPS AS
SHOWN BELOW AND ON
PAGE 236.
‘NESTING’ BASE
OUTDOOR USE
THE TA6701 TABLE HAS AN ANODIZED ALUMINIUM COLUMN AND PLASTIC MOULDED
STEEL CROSS TECHNOPOLYMER TOP (30mm THICK). THE TOP CAN BE SUPPLIED IN
BEIGE, YELLOW, GREY, RED, LIGHT ORANGE, BLUE, BLACK, BURGUNDY, OLIVE GREEN,
BROWN OR GREEN.
TA6701
730
THE TA0917 AND TA0918 TABLES ARE CONSTRUCTED FROM HIGH QUALITY, HARD
WEARING ALUMINIUM. THEY CAN BE SUPPLIED WITH A CHOICE OF TABLE TOPS: OPTIONS INCLUDE ALUMINIUM (INOX) TOPS AND SPECIAL OUTDOOR MELAMINE TOPS
AS SHOWN BELOW AND ON PAGE 236.
OUTDOOR USE
TA0918
710
TOP SIZES: 720 mm diam.
720 x 720 mm
800 x 800 mm
TOP SIZES: 600 x 600 mm
700 x 700 mm
800 x 800 mm
THIS IS A STACKING TABLE
TA0917
710
TOP SIZES: 600 mm diam.
700 mm diam.
800 mm diam.
THIS IS A STACKING TABLE
241
‘MOROCCO’ BLUE
‘MOROCCO’ GREEN
THESE SPECIAL OUTDOOR MELAMINE TOPS ARE MADE USING A PROCESS THAT PRODUCES A WATERPROOF, WEATHER RESISTANT
AND HIGHLY DURABLE FINISH. THEY HAVE THE SURFACE PROPERTIES OF A LAMINATE BUT WITH AN INTEGRAL SUBSTRATE SO
THERE IS NO POSSIBILITY OF DE-LAMINATION, SEPARATION OR WARPING.
THERE ARE A NUMBER OF DECORATIVE OR PLAIN DESIGNS AVAILABLE. THE ‘MOROCCO’ TOPS ARE AVAILABLE IN BLUE, GREEN OR
BROWN. THE ‘SOLO’ TOPS (BELOW) OFFER A CHOICE OF NATURAL LOOKING WOOD FINISHES.
CERISIER
MAHOGANY
TECK
NOYER
MONTANA
HETRE
OREGON
CALVADOS
COLORADO
WENGE
SOLID TEAK (ROBINA WOOD) TABLE TOPS. WE RECOMMEND THAT ANY TEAK PRODUCTS SHOULD BE
TREATED REGULARLY WITH A SUITABLE TEAK OIL TO
MAINTAIN APPEARANCE AND DURABILITY WHILST
BEING USED EXTERNALLY.
SQUARE TOP (DETAIL)
242
ROUND TOP (DETAIL)
ALUMINIUM TABLE TOPS, SUITABLE FOR OUTDOOR USE.
WA ITING PLACES
244
245
246
247
248
BBC WHITE CITY: PHOTOGRAPH BY CHARLIE BIRCHMORE / DESIGN BY TILNEY SHANE
HS2007
710
470
610
AC2002
710
470
610
690
THE AC2002 CHAIR AND HS2007 HIGH STOOL ARE
MANUFACTURED WITH A HARD WEARING STEEL
FRAME, WHICH IS AVAILABLE IN A CHROME OR ERP
COATED FINISH. THEY HAVE A CUSHIONED SHELL
WHICH CAN BE UPHOLSTERED IN FABRIC, VINYL OR
LEATHER.
THE LCBARD01 AND LCBARD02 CHAIRS AND THE SOBARD01 SOFA
ARE MANUFACTURED WITH A HARD WEARING STEEL FRAME,
WHICH IS AVAILABLE IN A CHROME OR ERP COATED FINISH. THEY
HAVE A CUSHIONED SEAT AND BACK WHICH CAN BE UPHOLSTERED IN FABRIC, VINYL OR LEATHER. THE CTBARD01 IS AVAILABLE IN THE SAME FRAME FINISHES, AND A RANGE OF TABLE TOPS
ARE SHOWN ON THE BACK PAGE OF THE DIRECTORY.
LCBARD01
790
430
740
LCBARD02
550
790
420
835
620
SOBARD01
CTBARD01
550
790
425
430
835
244
690
1150
Max. top 1200 x 600
550
WAITING PLACES
HS2008
870
745
590
485
SWIVEL SEAT
THE AC2003 CHAIR AND HS2008
HIGH STOOL ARE MANUFACTURED WITH A HARD WEARING
METAL COLUMN AND BASE
PLATE, WHICH IS SUPPLIED IN A
CHROME FINISH. THEY HAVE A
CUSHIONED SHELL WHICH CAN
BE UPHOLSTERED IN FABRIC,
VINYL OR LEATHER.
AC2003
710
470
610
690
SWIVEL SEAT
CHEO18
CHEO19
840
840
470
490
460
470
490
460
CHEO20
840
470
490
460
THE CHEO18, CHEO19 AND CHEO20 CHAIRS ARE MANUFACTURED WITH A
HARD WEARING STEEL FRAME, WHICH IS SUPPLIED IN A CHROME FINISH. THEY
HAVE A CUSHIONED SEAT AND BACK WHICH CAN BE UPHOLSTERED IN FABRIC,
VINYL OR LEATHER.
245
CH4607
795
465
555
430
STACKING CHAIR
BS4602
790
460
600
1850
THE CH4607 CHAIR HAS A HARD WEARING METAL FRAME
WITH A PERFORATED SEAT AND BACK. THE FRAME IS
AVAILABLE IN ALUMINIUM ERP, BLACK ERP, SATIN CHROME
OR CHROME FINISH. A BEAM SEATING VERSION OF THE
CHAIR (BS4602) IS ALSO AVAILABLE, WITH 2, 3, 4 OR 5
SEATS, AND THE OPTION OF A TABLE TOP IN BETWEEN.
THE CH4606 CHAIR HAS A HARD WEARING METAL
FRAME WITH A PADDED SEAT AND BACK, WHICH CAN
BE UPHOLSTERED IN ANY STANDARD FABRIC. THE
FRAME IS AVAILABLE IN ALUMINIUM ERP, BLACK ERP
OR CHROME FINISH.
CH4606
795
465
555
430
STACKING CHAIR
CH4605
795
465
555
THE CH4605 CHAIR HAS A DURABLE METAL FRAME WITH A ROBUST
POLYPROPYLENE SEAT AND BACK. THE FRAME CAN BE SUPPLIED IN
AN ALUMINIUM ERP, BLACK ERP OR CHROME FINISH. THE SEAT AND
BACK ARE AVAILABLE IN A CHOICE OF FIVE DIFFERENT COLOURS:
GREY, BLACK, BLUE AND BORDEAUX RED.
246
430
STACKING CHAIR
LINKING DETAIL (OPTIONAL)
WAITING PLACES
CH9701
830
500
580
530
STACKING CHAIR
THE CH9701 CHAIR IS MANUFACTURED FROM HARD WEARING METAL, WHICH CAN BE FINISHED
IN CHROME OR BLACK ERP COATED. THE SEAT AND BACK ARE AVAILABLE IN DURABLE PLASTIC
OR UPHOLSTERED FOR EXTRA COMFORT IN LEATHERETTE OR FABRIC.
CH4604
795
465
555
430
BS4603
790
460
600
1850
STACKING CHAIR
THE CH4604 CHAIR HAS A HARD WEARING METAL
FRAME WITH A ROBUST WOODEN SEAT AND BACK.
THE FRAME IS AVAILABLE IN ALUMINIUM ERP, BLACK
ERP OR CHROME FINISH. THE SEAT AND BACK ARE
SUPPLIED IN NATURAL LACQUERED WOOD. A BEAM
SEATING VERSION OF THE CHAIR (BS4603) IS ALSO
AVAILABLE, WITH 2, 3, 4 OR 5 SEATS. THIS CAN BE
SUPPLIED WITH OR WITHOUT ARMRESTS.
247
MIS2001
MIS2002
825
470
470
810
1560
650
THE MIS2001, MIS2002 AND MIS2003 MODULAR SEATING UNITS
ARE MANUFACTURED FROM HARD WEARING, HIGH QUALITY MATERIALS TO WITHSTAND A BUSY LEISURE ENVIRONMENT. THEY
CAN BE PLACED IN A VARIETY OF CONFIGURATIONS FOR FLEXIBILITY OF LAYOUT AND MAXIMUM USE OF SPACE. THE SEATING
UNITS CAN BE UPHOLSTERED IN FABRIC, VINYL OR LEATHER.
THE TABLE UNIT CAN BE FINISHED IN A CHOICE OF LAMINATES.
ALL UNITS HAVE TUBULAR STEEL FEET WHICH CAN BE POWDER
COATED ANY RAL COLOUR.
1190
MIS2003
420
590
1170
ACEO01
660
800
430
620
248
600
THE ACEO01 CHAIR IS MANUFACTURED
WITH A HARD WEARING STEEL FRAME,
WHICH IS AVAILABLE IN A CHROME OR ERP
COATED FINISH. IT HAS A CUSHIONED
SEAT, BACK AND ARMRESTS WHICH CAN BE
UPHOLSTERED IN FABRIC, VINYL OR
LEATHER.
B ANQUET
250
251
252
PHOTOGRAPH BY JIM ELLAM
CH1801
980
980
460
600
460
600
450
560
CH1802
980
460
600
THESE CHAIRS ARE MANUFACTURED WITH A HARD
WEARING METAL FRAME, WHICH IS AVAILABLE IN ANY
STANDARD COLOUR ERP COATING. THEY HAVE A
CUSHIONED SEAT AND BACK WHICH CAN BE UPHOLSTERED IN FABRIC, VINYL OR LEATHER.
AC1806
860
460
540
250
AC1801
550
CH1808
860
460
540
420
450
CH1807
860
870
460
460
540
BANQUET
AC1802
580
550
450
CH1803
860
460
540
420
CH1810
900
460
580
THESE CHAIRS ARE MANUFACTURED WITH A HARD WEARING
METAL FRAME, WHICH IS AVAILABLE IN ANY STANDARD
COLOUR ERP COATING. THEY HAVE A CUSHIONED SEAT AND
BACK WHICH CAN BE UPHOLSTERED IN FABRIC, VINYL OR
LEATHER.
450
AC1808
900
460
580
560
251
CH1809
AC1807
950
950
460
600
460
600
450
550
THE CH1809 AND AC1807 CHAIRS ARE MANUFACTURED
WITH A HARD WEARING METAL FRAME, WHICH IS AVAILABLE IN ANY STANDARD COLOUR ERP COATING. THEY
HAVE A CUSHIONED SEAT AND BACK WHICH CAN BE
THE CH0992 CHAIR IS MANUFACTURED WITH A
HARD WEARING ALUMINIUM FRAME, WHICH IS FINISHED IN GOLD ERP. IT HAS A CUSHIONED SEAT
AND BACK WHICH CAN BE UPHOLSTERED IN BLUE,
GREEN OR RED FABRIC.
CH0992
935
460
560
445
TA0909
720
MAX.TOP 1830 mm diam.
TA0908
720
MAX.TOP 1830 x 760 mm
252
THESE TABLES ARE MANUFACTURED WITH A HARD
WEARING METAL FRAME, WHICH IS AVAILABLE IN ANY
STANDARD COLOUR ERP COATING. THEY HAVE A FOLDING MECHANISM WHICH ALLOWS THEM TO BE FOLDED
FLAT FOR EFFICIENT STORAGE. THERE IS A RANGE OF
AVAILABLE TABLE TOPS SHOWN ON THE BACK PAGE OF
THE DIRECTORY
B A ROQUE
254
255
256
257
258
CH9601
1060
650
500
AC9601
1060
650
600
THE CH9601 CHAIR AND AC9601 ARMCHAIR ARE MANUFACTURED FROM HIGH QUALITY WOOD WITH PRECISELY CRAFTED DETAILING. THEY CAN BE
VINYL OR LEATHER.
AC9602
CH9602
1035
1035
640
600
575
500
THE CH9602 CHAIR AND AC9602
ARMCHAIR ARE MANUFACTURED
FROM HIGH QUALITY WOOD WITH
PRECISELY CRAFTED DETAILING.
THEY CAN BE UPHOLSTERED IN
CH9604
985
570
460
THEY CAN BE UPHOLSTERED IN ANY
CONTRACT STANDARD FABRIC,
VINYL OR LEATHER.
AC9604
985
580
254
560
B A RO Q U E
AC9603
995
570
550
CH9603
995
515
490
THE CH9603 CHAIR AND AC9603 ARMCHAIR ARE MANUFACTURED FROM HIGH QUALITY WOOD WITH PRECISELY
CRAFTED DETAILING. THEY CAN BE UPHOLSTERED IN
CH0990
950
460
595
450
AC0953
950
450
610
590
HS0953
1100
750
465
460
THE AC0953 AND CH0990 CHAIRS AND HS0953 HIGH STOOL ARE MANUFACTURED
FROM HIGH QUALITY BEECH WOOD WHICH CAN BE STAINED TO SPECIFICATION.
THEY CAN BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL OR
LEATHER.
255
AC9609
970
520
490
CH9609
970
520
490
THE CH9609 CHAIR AND AC9609 ARMCHAIR ARE MANUFACTURED FROM HIGH QUALITY WOOD WITH PRECISELY CRAFTED DETAILING. THEY CAN BE
VINYL OR LEATHER.
CH9612
CH9613
960
1020
530
550
490
490
THE CH9612 AND CH9613 CHAIRS
ARE MANUFACTURED FROM HIGH
QUALITY WOOD WITH PRECISELY
CRAFTED DETAILING. THEY CAN
BE UPHOLSTERED IN ANY CONTRACT STANDARD FABRIC, VINYL
OR LEATHER.
CH9611
1020
540
500
VINYL OR LEATHER.
AC9611
1020
580
256
600
B A RO Q U E
CH52100
AC5240
695
990
1000
495
530
520
585
475
610
THE CH52100 AND AC5240
CHAIRS ARE MANUFACTURED
FROM HIGH QUALITY WOOD
WITH PRECISELY CRAFTED
DETAILING. THEY CAN BE
UPHOLSTERED IN ANY
VINYL OR LEATHER.
CH52101
970
490
530
460
AC5241
665
990
510
610
THE CH52101, CH52102 AND AC5241
CHAIRS ARE MANUFACTURED FROM
HIGH QUALITY WOOD WITH
VINYL OR LEATHER.
575
CH52102
1060
505
490
500
257
AC5229
605
880
420
780
730
CH52103
THE AC5229 AND CH52103 CHAIRS ARE MANUFACTURED
FROM HIGH QUALITY WOOD WITH PRECISELY CRAFTED
DETAILING. THEY CAN BE UPHOLSTERED IN ANY
1015
530
565
485
TA5202
765
1100
1100
THE TA5202 TABLE IS MANUFACTURED
258
ALB A / SPIRAL
BY ROB M ULHOLLAND
260
260
261
261
262
262
PHOTOGRAPH BY PAUL ZANRE / DESIGN BY THE M ORRISON PART NERSHIP
CHALBA02
855
460
485
420
CHALBA04
855
460
485
420
CHALB202
855
465
440
420
THE CHAIRS IN THE ALBA COLLECTION ARE MANUFACTURED FROM HARD WEARING ERP COATED STEEL AND CAN BE
UPHOLSTERED IN A WIDE RANGE OF FABRICS. THE SAME BASIC CHAIR IS AVAILABLE WITH A ROLLED STEEL BACK WHICH CAN BE
LEFT PLAIN OR LASER CUT WITH A CUSTOMISED DESIGN SUCH AS A LOGO. ALTERNATIVELY, THE CHAIR CAN BE SUPPLIED WITH A
‘WAVY’ BACK MADE OF STEEL BAR OR A BEECH VENEERED PLYFORM BACK WHICH CAN BE STAINED TO SPECIFICATION.
THE TABLES BASES IN THE ALBA
COLLECTION ARE MANUFACTURED FROM
HARD WEARING ERP COATED STEEL.
THERE ARE A WIDE NUMBER OF TABLE TOP
OPTIONS AVAILABLE, AS DETAILED ON THE
BACK PAGE OF THE DIRECTORY.
TAEO18
TAALBA02
720
720
260
or 1200 mm diam.
855
460
485
ALB A / SPIRAL
BY ROB M ULHOLLAND
CHALBA03
420
HSALBA01
HSALBA02
1040
775
775
415
420
420
420
THE STOOLS IN THE ALBA COLLECTION ARE MANUFACTURED FROM HARD WEARING ERP COATED STEEL AND CAN BE UPHOLSTERED IN A
WIDE RANGE OF FABRICS. THEY CAN BE SUPPLIED WITH OPTIONAL STEEL BAR TWIRLS ROUND THE BASE OF THEIR LEGS (AS
ILLUSTRATED). THE HSALBA01 HIGH STOOL HAS A ROLLED STEEL BACK WHICH CAN BE LEFT PLAIN OR LASER CUT WITH A CUSTOMISED
DESIGN SUCH AS A LOGO.
LSALBA01
LSALB201
465
420
470
420
420
420
261
HSSPRL02
1140
790
390
445
CHSPRL01
1135
485
485
430
THE CHSPRL01 CHAIR AND CORRESPONDING HIGH STOOL
HSSPRL02 ARE CONSTRUCTED FROM HARD WEARING TUBULAR
MILD STEEL WITH A VENEERED PLYFORM BACK AND COMFORTABLE
SEAT PAD. THE FRAME CAN BE ERP COATED IN ANY STANDARD
COLOUR, THE BACK CAN BE STAINED TO SPECIFICATION AND THE
SEAT CAN BE UPHOLSTERED IN ANY ONE OF A VAST SELECTION OF
FABRICS, LEATHERS AND VINYLS. THE ‘SPIRAL’ MOTIF ON THE FACE
OF THE BACK CAN BE CUSTOMISED OR REPLACED WITH AN
ALTERNATIVE DESIGN SUCH AS A COMPANY LOGO.
THE WBSPRL01 WINE BUCKET IS
CONSTRUCTED FROM HARD WEARING MILD
STEEL TUBE AND BAR WITH A SPUN ALUMINIUM
BUCKET INSERT. THE FRAME CAN BE FINISHED
IN ANY STANDARD ERP COLOUR.
WBSPRL01
760
200
200
TASPRL04
730
MAX.TOP SIZE 1800 x 900 mm or 1200 mm diam.
THE TASPRL04 TABLE IS CONSTRUCTED FROM HARD WEARING MILD STEEL TUBE WHICH
CAN BE FINISHED IN ANY STANDARD ERP COLOUR. THERE ARE A WIDE NUMBER OF
TABLE TOP OPTIONS AVAILABLE, AS DETAILED ON THE BACK PAGE OF THE DIRECTORY.
262
OCTAVIAN
BY CHAIRS DESIGNS LIMITED
264
264
264
264
PHOTOGRAPH BY ROBERT CONNOLLY
ZEBERUNDUM
1060
460
540
HELIOS
1140
460
540
440
THE ‘OCTAVIAN’ HIGH BACK CHAIRS ZEBERUNDUM AND HELIOS
ARE CONSTRUCTED FROM A ROBUST FOLDED STEEL BASIC FRAME
WITH LACQUERED TIMBER BACK STRUTS. THE ENTIRE FRAME IS
FINISHED IN BLACK ERP TO ACCENTUATE THE DRAMATIC SHAPE
AND COLOUR OF THE CHAIR’S SEAT AND BACK. THESE ARE
CUSHIONED FOR COMFORT AND CAN BE UPHOLSTERED IN ANY
CONTRACT STANDARD FABRIC, VINYL OR LEATHER- WHETHER A
SIMPLE HUE OR SOMETHING MORE EXOTIC.
THE ‘OCTAVIAN’ LOW BACK CHAIRS LEOPARDINO AND
ANGELO ARE CONSTRUCTED FROM A ROBUST FOLDED
STEEL BASIC FRAME WITH LACQUERED TIMBER BACK
STRUTS. THE ENTIRE FRAME IS FINISHED IN BLACK ERP TO
ACCENTUATE THE DRAMATIC SHAPE AND COLOUR OF
THE CHAIR’S SEAT AND BACK. THESE ARE CUSHIONED
FOR COMFORT AND CAN BE UPHOLSTERED IN ANY
CONTRACT STANDARD FABRIC, VINYL OR LEATHERWHETHER A SIMPLE HUE OR SOMETHING MORE EXOTIC.
LEOPARDINO
990
460
525
264
440
440
ANGELO
1070
460
525
470
WICKHAM VA N EYCK
266
266
266
PHOTOGRAPH BY PETER COOK / DESIGN BY WICKHAM VAN EYCK
CRISP
710
430
700
THE CRISP CHAIR IS MANUFACTURED FROM
HARD WEARING RUSSIAN BIRCH MULTILAYER
PLYWOOD, WHICH CAN BE PAINTED IN ANY
STANDARD COLOUR FOR A DURABLE FINISH.
THE CHAIR HAS A CUSHIONED SEAT AND
BACK FOR MAXIMUM COMFORT, WHICH CAN
BE UPHOLSTERED IN FABRIC, VINYL OR
LEATHER.
THE CROISSANT CHAIR IS MANUFACTURED FROM HARD WEARING RUSSIAN BIRCH MULTILAYER PLYWOOD, WHICH CAN BE
PAINTED IN ANY STANDARD COLOUR FOR A DURABLE FINISH. THE CROISSANT HIGH STOOL IS MANUFACTURED FROM TUBULAR
MILD STEEL WITH A SOLID STEEL BASE PLATE, WHICH CAN BE ERP COATED IN A WIDE CHOICE OF COLOURS. BOTH CHAIR AND
HIGH STOOL HAVE A CUSHIONED SEAT AND BACK FOR MAXIMUM COMFORT, WHICH CAN BE UPHOLSTERED IN FABRIC, VINYL OR
LEATHER.
CROISSANT
BAR STOOL
1120
860
560
500
CROISSANT
720
460
610
266
530
580
20 T H CENTURY CLASSICS
268
268
269
269
SO6601
TU6602
770
770
400
710
400
710
1310
800
THE SO6601 SOFA AND TU6602 TUB CHAIR ARE MANUFACTURED WITH
A HARD WEARING TUBULAR STEEL FRAME,WHICH IS CHROMED FOR A
DURABLE FINISH. THE DEEP CUSHIONED SEAT, BACK AND ARMS ARE
UPHOLSTERED IN BLACK LEATHER.
CH1406
OT1401
370
740
400
760
590
750
540
THE CH1406 CHAIR AND OT1401 LOW
STOOL ARE MANUFACTURED WITH A
HEAVY CAST METAL FRAME,WHICH IS
CHROMED FOR A DURABLE FINISH. THE
CHAIR’S COMFORTABLE CUSHIONED SEAT
AND BACK,AND THE LOW STOOL’S SEAT,
ARE UPHOLSTERED IN BLACK LEATHER.
268
770
450
540
550
HS1401
1060
720
620
540
CH1405
THE CH1405 AND CH1407 CHAIRS AND HS1401 HIGH STOOL ARE
MANUFACTURED WITH A DRAWN STEEL ROD FRAME WHICH CAN BE
CHROME PLATED OR LACQUERED. THE SEAT CUSHION CAN BE
UPHOLSTERED IN LEATHER OR FABRIC.
760
450
730
830
2 0 T H C E N T U RY C L A S S I C S
CH1407
AC1401
SO1402
710
710
450
750
1680 /
2220
750
880
THE SO1402 SOFA AND AC1401 ARMCHAIR ARE MANUFACTURED
WITH A HARD WOODEN SUBFRAME AND DEEP POLYURETHANE FOAM
FOR MAXIMIMUM COMFORT. THEY ARE UPHOLSTERED IN LEATHER
AND HAVE LACQUERED BEECH FEET.
269
INDEX
ITEM CODE
PAGE
AC0503
AC0902
AC0904
AC0906
AC0907
AC0907
AC0908
AC0909
AC0910
AC0911 (ZEB)
AC0911
AC0912
AC0913
AC0914
AC0915
AC0917
AC0918
AC0919
AC0920
AC0921
AC0924
AC0925
AC0931
AC0932
AC0933
AC0934
AC0935
AC0936
AC0937
AC0938
AC0939
AC0940
AC0941
AC0942
AC0944
AC0945
AC0946
AC0947
AC0948
AC0949
AC0950
AC0951
AC0952
AC0953
AC0954
AC0955
AC0956
AC0957
AC0958
AC0966
AC1301
AC1302
AC1401
AC1801
AC1802
AC1806
AC1807
AC1808
AC2001
AC2002
AC2003
AC2203
AC2204
AC2205
AC2206
AC2207
AC2208
AC3304
AC3313
AC3703
AC4404
AC4503
AC4504
AC4505
AC4508
AC4601
AC5202
AC5205
47
118
118
106
114
119
108
120
116
108
109
113
112
104
113
130
237
233
230
232
109
104
107
112
110
121
117
114
131
232
232
233
234
235
125
125
125
229
116
129
124
125
124
255
229
129
235
228
228
115
163
163
269
250
251
250
252
251
94
244
245
88
90
73
46
46
46
237
236
53
171
214
214
214
205
80
146
160
AC5206
AC5208
AC5210
AC5212
AC5213
AC5214
AC5216
AC5217
AC5218
AC5219
AC5220
AC5221
AC5222
AC5223
AC5224
AC5225
AC5226
AC5227
AC5229
AC5230
AC5231
AC5232
AC5234
AC5235
AC5236
AC5237
AC5238
AC5239
AC5240
AC5241
AC5270
AC5702
AC6201
AC6408
AC6409
AC6410
AC6411
AC6601
AC6609
AC6611
AC6614
AC6615
AC6618
AC7101
AC7201
AC7202
AC7203
AC7204
AC7701
AC8901
AC8902
AC8903
AC8904
AC9101
AC9601
AC9602
AC9603
AC9604
AC9609
AC9611
AC9801
AC9802
AC9906
AC9907
ACEO01
ACEO02
ANGELO
BS0901
BS2201
BS2202
BS4601
BS4602
BS4603
BS6601
BS6701
BSMIR01
CH0406
CH0505
CH0506
CH0902
CH0904
CH0906
CH0908
CH0909
CH0910
150
153
156
168
168
149
163
169
169
154
151
144
158
152
152
153
158
142
258
161
140
140
155
159
159
159
161
169
257
257
152
47
236
155
50
50
51
74
70
76
71
71
63
49
52
52
52
52
58
157
156
156
157
162
254
254
255
254
256
256
78
78
170
170
248
37
264
228
90
65
80
246
247
71
82
6
70
84
84
118
118
105
230
232
231
CH0913
CH0914
CH0915
CH0916
CH0917
CH0918
CH0921 (ZEB)
CH0921
CH0922
CH0923
CH0924
CH0925
CH0926
CH0927
CH0928
CH0929
CH0930
CH0931
CH0932
CH0933
CH0934
CH0935
CH0936
CH0937
CH0939
CH0940
CH0941
CH0942
CH0943
CH0949
CH0950
CH0951
CH0952
CH0953
CH0954
CH0956
CH0957
CH0958
CH0959
CH0960
CH0961
CH0962
CH0963
CH0964
CH0965
CH0967
CH0968
CH0969
CH0970
CH0973
CH0977
CH0978
CH0979
CH0980
CH0981
CH0982
CH0983
CH0985
CH0986
CH0987
CH0988
CH0989
CH0990
CH0991
CH0992
CH0993
CH0994
CH0995
CH0996
CH1006
CH1301
CH1302
CH1303
CH1405
CH1406
CH1407
CH1801
CH1802
CH1803
CH1807
CH1808
CH1809
CH1810
CH2001 (UPHOL.)
CH2001
119
104
110
130
120
130
108
109
104
128
106
111
123
112
109
122
108
119
120
113
112
116
134
133
113
111
131
134
133
117
121
111
117
110
105
128
128
107
122
122
122
121
121
123
123
121
122
105
106
132
114
134
233
234
233
235
107
116
129
124
125
124
255
115
252
229
228
228
129
172
172
155
155
269
268
269
250
250
251
251
250
252
251
94
94
CH2002
CH2003
CH2004
CH2005
CH2006
CH2007
CH2204
CH2206
CH2207
CH2212
CH2213
CH2214
CH2215
CH2216
CH2217
CH2218
CH2219
CH2221
CH2222
CH2223
CH2224
CH2226
CH2229
CH2231
CH2232
CH2233
CH3107
CH3108
CH3307
CH3702
CH3719
CH4413
CH4601
CH4602
CH4603
CH4604
CH4605
CH4605
CH4606
CH4607
CH5201
CH5207
CH5209
CH5210
CH52100
CH52101
CH52101
CH52103
CH52104
CH52105
CH52106
CH52107
CH52108
CH52109
CH5211
CH52110
CH52111
CH5212
CH5214
CH5215
CH5216
CH5219
CH5220
CH5220
CH5221
CH5223
CH5224
CH5228
CH5240
CH5241
CH5245
CH5246
CH5247
CH5248
CH5249
CH5250
CH5253
CH5254
CH5255
CH5256
CH5257
CH5259
CH5260
CH5261
CH5266
32
102
96
32
95
95
60
60
60
88
73
93
67
67
64
64
66
90
93
92
92
66
77
72
72
172
171
171
237
168
53
171
81
81
80
247
246
81
246
246
154
146
148
148
257
257
257
258
167
166
166
140
140
140
148
154
154
150
160
160
160
150
152
153
152
144
144
156
149
148
149
149
151
151
167
153
164
164
164
144
144
165
165
165
154
CH5267
CH5268
CH5269
CH5270
CH5271
CH5272
CH5274
CH5275
CH5276
CH5277
CH5278
CH5279
CH5280
CH5281
CH5282
CH5283
CH5284
CH5285
CH5286
CH5287
CH5288
CH5289
CH5290
CH5291
CH5292
CH5293
CH5294
CH5295
CH5296
CH5297
CH5298
CH5299
CH5601
CH5602
CH5703
CH5704
CH6105
CH6106
CH6107
CH6201
CH6412
CH6413
CH6414
CH6415
CH6416
CH6417
CH6603
CH6604
CH6605
CH6608
CH6619
CH6621
CH6622
CH6623
CH6624
CH6625
CH6629
CH6630
CH6631
CH6632
CH6702
CH6703
CH6704
CH6705
CH6706
CH6801
CH6802 (SIZE 5)
CH6802 (SIZE 6)
CH6901
CH7101
CH7202
CH7203
CH7204
CH7205
CH7206
CH7701
CH7704
CH8901
CH8902
CH8903
CH9101
CH9601
CH9602
CH9603
CH9604
142
142
150
151
150
151
168
164
164
166
152
152
158
146
146
166
166
166
142
142
142
159
165
165
148
148
140
163
159
167
167
167
170
170
54
47
100
100
101
236
155
51
50
51
51
50
76
77
85
98
97
76
55
99
75
75
98
62
62
85
82
82
80
62
63
85
73
73
48
49
97
99
54
54
95
58
58
156
157
157
162
254
254
255
254
CH9609
CH9611
CH9612
CH9613
CH9701
CH9801
CH9802
CH9803
CH9804
CH9908
CHAD01
CHAD02
CHALB202
CHALBA02
CHALBA03
CHALBA04
CHCOCO01
CHCOCO02
CHEO02
CHEO03
CHEO04
CHEO05 (PLY SEAT)
CHEO05 (UPHOL.)
CHEO06
CHEO07
CHEO08
CHEO09
CHEO11
CHEO18
CHEO19
CHEO20
CHEO21
CHGLAM02
CHLINR01
CHLINR02
CHLINR03
CHLINR04
CHMIR01
CHOMAR01
CHORA01
CHORA02
CHORA03
CHORA04
CHROC01
CHROC02
CHSPRL01
CHT201
CHTIMA01
CHTIMA02
CRISP
CROISSANT BAR
CROISSANT
CT0401
CT0402
CT0501
CT2001
CT2003
CT2004
CT2005
CT2006
CTBARD01
CTOMAR01
CU2002
CU2003
CU2004
CU4501
CU5001
CUHARDY01
CUHARDY02
FAST FOOD
FLIP ST15
FT4601
FT4602
FT4603
FT4604
HELIOS
HS0401
HS0402
HS0403
HS0404
HS0405
HS0501
HS0902
HS0903
HS0904A
256
256
256
256
247
78
78
79
79
170
33
33
260
260
261
260
42
42
36
36
36
32
32
37
37
36
36
37
245
245
245
84
28
21
21
20
21
6
9
25
24
25
24
10
10
262
96
34
34
266
266
266
136
136
201
200
201
200
201
201
244
8
213
213
213
207
204
212
212
38 – 39
191
194
194
195
195
264
83
86
83
83
55
84
118
118
104
HS0905
HS0906
HS0907
HS0909
HS0910
HS0911
HS0912
HS0913
HS0914
HS0915
HS0916
HS0917
HS0918
HS0919
HS0920
HS0921
HS0922
HS0923
HS0924
HS0925
HS0926
HS0928
HS0929
HS0930
HS0931
HS0932
HS0933
HS0934
HS0936
HS0937
HS0938
HS0940
HS0943
HS0943
HS0944
HS0945
HS0946
HS0947 (ZEB)
HS0948
HS0949
HS0950
HS0951
HS0952
HS0953
HS0954
HS1003
HS1401
HS2001
HS2002
HS2003
HS2004
HS2008
HS2008
HS2203
HS2204A
HS2204B
HS2205
HS2208
HS2216
HS2218
HS2227
HS2228
HS2228
HS2230
HS2231
HS2232
HS2233
HS2234
HS2235
HS2236
HS2237
HS2238
HS2239
HS5201
HS5202
HS5203
HS5205
HS5206
HS5207
HS5208
HS5209
HS5210
HS5211
HS5212
HS5213
230
232
231
112
111
108
106
120
113
119
132
133
112
116
126
133
127
131
110
119
111
104
127
105
128
107
115
113
121
117
117
114
132
231
233
231
107
108
116
120
124
125
124
255
229
172
269
94
32
96
37
244
245
57
56
60
56
60
56
57
93
68
88
91
91
91
91
91
65
66
67
69
69
146
148
150
153
164
151
149
144
158
146
142
154
HS6101
HS6301
HS6302
HS6403
HS6404
HS6601B
HS6604
HS6605
HS6609A
HS6609B
HS6610
HS6612
HS6613
HS6614
HS6615
HS6616
HS6701
HS6703
HS6704
HS6903
HS6904
HS6905
HS7101
HS7102
HS7701
HS7702
HS8901
HSAD01
HSALBA01
HSALBA02
HSCOCO01
HSCOCO02
HSEO02
HSGLAM01
HSGLAM02
HSGLAM03
HSGLAM04
HSGLAM05
HSGLAM07
HSGLAM08
HSLINR01
HSLINR02
HSMIR01
HSMIR02
HSOMAR01
HSOMAR02
HSORA01
HSORA02
HSORA03
HSROC01
HSROC02
HSSPRL02
HST201
HSTIMA01
HSTIMA03
LC1501
LC1502
LC3201
LC4003
LC4401
LCBARD01
LCBARD02
LEOPARDINO
LO FI (COLLECTION)
LS0901
LS0902
LS0903
LS0904
LS0905
LS0906
LS2003
LS2003
LS2005
LS2006
LS7701
LS7702
LS8901
LSAD02
LSALB201
LSALBA01
LSEO02
LSGLAM01
LSGLAM02
LSGLAM03
LSGLAM04
101
87
87
155
51
57
74
97
75
99
77
55
48
48
48
71
86
86
63
48
44
45
49
49
59
59
157
33
261
261
42
42
32
29
29
29
28
30
28
28
21
20
6
6
9
9
26
25
25
10
10
262
96
34
34
215
215
215
215
171
244
244
264
11-18
126
127
132
127
228
229
212
212
213
213
59
59
157
33
261
261
33
29
29
29
30
LSGLAM05
LSGLAM08
LSLINR01
LSMIR01
LSOMAR01
LSORA01
LSROC01
LSTIMA01
LSTIMA02
MIS2001
MIS2002
MIS2003
OT1401
PO0901
POGLAM03
POOMAR01
POOMAR02
PTA2201
PTA2202
PTA2203
PTA2204
PTA2205
PTA2206
PTA2209
PTA2213
PTA2216
PTA2217
PTA2218
SCESQ01
SCREENS
SERIES B CHAIR
SERIES B HIGH
SO1402
SO2405A
SO2407
SO2409
SO4501
SO4502
SO4505
SO4507
SO4508
SO4513
SO4514
SO4515
SO4516
SO4517
SO4518
SO4519
SO4520
SO5004
SO5005
SO5201
SO6601
SO9401
SOBARD01
SOESQ01
SOHARDY01
SOLINR01
SOMORRIS01
TA0501
TA0901
TA0902
TA0903
TA0904
TA0905
TA0908
TA0909
TA0910
TA0911
TA0912
TA0913
TA0914
TA0916
TA0917
TA0918
TA0919
TA0920
TA0921
TA0922
TA0923
TA0924
TA0925
TA0926
TA0927
TA0928
30
28
21
6
9
26
10
35
35
248
248
248
268
238
30
8
8
175
179
180
183
185
186
177
189
178
181
192
214
40 – 41
7
7
269
209
209
206
211
211
206
207
207
210
211
205
206
210
208
209
210
204
204
153
268
215
244
214
213
22
205
199
138
138
138
238
238
252
252
135
135
136
136
238
241
241
241
240
240
239
239
239
234
238
238
238
228
TA0929
TA0930
TA0931
TA0932
TA0933
TA0934
TA0935
TA0936
TA0937
TA0938
TA1102
TA1103
TA2201
TA2202
TA2203
TA2204
TA2205
TA2206
TA2208
TA2209
TA2210
TA2211
TA2213
TA2214
TA2216
TA2217
TA2218
TA2502
TA3001
TA3002
TA3003
TA3004
TA3006
TA3007
TA6501
TA6502
TA6503
TA6701
TA7701
TA7702
TA7703
TAAD01
TAALBA02
TAEO03
TAEO04
TAEO05
TAEO06
TAEO07
TAEO08
TAEO09
TAEO10
TAEO11
TAEO12
TAEO13
TAEO18
TAGLAM03
TAGLAM05
TALINR01
TAOMAR01
TAOMAR02
TAORA01
TASPRL04
TATIMA01
TU0902
TU0903
TU0904
TU2001
TU3201
TU4502
TU5201
TU5202
TU5203
TU6602
TU6901
TU6902
TU6903
TU6904
TU6905
TU9401
TUHARDY01
TUHARDY02
WBSPRL01
ZEBERUNDUM
202
239
239
239
240
202
202
202
202
202
135
135
174
179
180
183
184
186
182
176
187
188
189
190
178
181
192
258
137
138
137
138
137
137
192
193
193
241
58
58
59
33
260
196
196
197
197
197
197
198
198
199
198
198
260
30
28
22
8
8
26
262
35
131
131
131
215
215
207
161
161
161
268
45
44
44
44
45
215
212
212
262
264
TA B LE TOPS
OPTIONS SHOWN ARE INTENDED AS A GUIDE ONLY
OAK VENEER TOP / HARDWOOD EDGE (25 mm)
OAK VENEER TOP / HARDWOOD EDGE (36 mm)
LAMINATE TOP / RUSSIAN BIRCH EDGE
LAMINATE TOP / LAMINATE EDGE
LAMINATE TOP / HARDWOOD EDGE
LAMINATE TOP / MDF EDGE
SOLID ASH
ASH VENEER / MDF EDGE
ASH VENEER (STAINED) / MDF EDGE
LAMINATE TOP / RIBBED ALUMINIUM EDGE
LAMINATE TOP / PVC SILVER EDGE
LACQUERED MDF
HINGED TOP OPTIONS (ABOVE AND RIGHT)
EDGE DETAILS (25 OR 36 mm AS STANDARD):
FLAT
BULLNOSE
CHAMFER
THESE TABLE TOPS ARE FOR INTERIOR USE ONLY. TOPS SUITABLE FOR EXTERIOR USE (ALUMINIUM,TEAK AND SPECIAL MELAMINE) ARE SHOWN
ON PAGE 242 OF THE DIRECTORY. DUE TO DISCREPANCIES IN PRINT REPRODUCTION,ACTUAL FINISHES MAY DIFFER FROM THOSE SHOWN.

pages 1-16

Transcription

Similar documents

Page 1 candiles y arbotantes de forja >> c a l u x Page 2 1 15

www.luv2pak.com

Lumber Product Offerings PDF