Operators for Swing Gates

Operators for Swing Gates
OPERATOR MT
OPERATOR MT1H
OPERATOR MK2
Although our philosophy may be simple – “To develop and manufacture first-class drive equipment for installation on gates, doors
and barriers” – we have manufactured swing gate operators for more
than 35 years according to this straightforward motto, so perhaps
it comes as no surprise that our operators open and close hundreds
of thousands of gates in arctic cold and desert heat alike. We never
compromise on quality, which is why our operators can be found
in locations wherever high security and reliability is in demand,
such as Sweden’s central bank, correctional institutions, harbours,
airports and industries all over the world.
OPERATOR MK2H
OPERATOR M10
DAAB operators are available in various speeds suited to the size
of the gate. The operators are self-locking, which means that it is
not possible to open or close a gate manually without releasing
the operator arm. The manual-release mechanism is an easy-tooperate, lockable T-bolt. Thanks to a variety of different brackets
and arm systems we are able to provide a solution for any gate,
whether it be a special solution or a purely specialized variant.
FAAC operators – quality and attention in every detail.
www.faac.se
OPERATOR MT AND MT1H
MT and MT1H are used on gates with leaves up to 3500 mm and 300 kg. Consult FAAC for other applications. Electric motors
are available for single phase, or three-phase, 230 or 400 Volt. Twin worm gears type DAAB MT. The gear case is manufactured in
aluminium. Worm gears: The worm gears are made from special bronze and machined in special, highly-stable precision tools.
All shafts have bearings well dimensioned for the purpose. The gears are self-locking and the gear case is filled with a synthetic
lubricant that withstands temperatures down to - 45°C.
Motor
Terminal block
Bracket
Limit switch
Limit cams
Gear case
Base plate
Motor arm
Manual release
MOTOR OUTPUT
kW**
0,25
0,25
REVS
CURRENT
GEAR RATIO OUTPUT REVS rpm A
i
rpm
1400 0,45 750
1,90
2800 0,45 750
3,80
TORQUE OPENING TIME
Nm
sec*
550
16
275
8
*) Opening times apply to standard arms where the operator arm rotates 200° during opening/closing. **) Applies to 3-phase, 400 Volt.
OPERATOR MT
OPERATOR MT1H
Base plate in silumin, cover in plastic.
Base plate in hot-dip galvanized steel, cover in stainless steel.
www.faac.se
MOTORIZED OPERATOR MK2 AND MK2H
MK2 and MK2H are used on gates with leaves up to 6000 mm and 500 kg. Consult FAAC for other applications. Electric motors
are available for single phase, or three-phase, 230, 400 or 500 Volt. Twin worm gears type DAAB MK. The gear case is manufactured
in aluminium. Worm gears: The worm gears are made from special bronze and machined in special, highly-stable precision tools.
All shafts have bearings well dimensioned for the purpose. The gears are self-locking and the gear case is filled with a synthetic lubricant that withstands temperatures down to - 45°C.
V-Belt units
V-belt
Bracket
Terminal block
Limit switch
Gear case
Motor
Motor arm attachment
Limit cams
Manual release
Base plate
Motor arm
MOTORBELT PULLEY
MOTOR OUTPUT
REVS
CURRENT GEAR RATIO OUTPUT REVS
TORQUE
OPENING TIME
mm
kw**rpmA i
rpm
Nm sec*
40 0,37
1400
0,93
14001,001600
30
50 0,37
1400
0,93
11501,251275
24
71 0,37
1400
0,93
8001,77900
17
100 0,37
1400
0,93
5702,49650
12
125 0,37
1400
0,93
4503,125109
140 0,37
1400
0,93
4003,494508
421
B
Designed by
Drawn by
MPO
BOX 125 S-284 22 PERSTORP
SWEDEN
www.daab.se
5
4
3
Checked by
Date
Scale
2011-02-01
1:4
Produkt information
MK2
Sidomontage
A
Object No.
Replaces
Drw. No.
2
M43483
1
B
B
Sheet
1
6
REV.
A
A
3
3
2
2
1
1
6
5
4
3
OPERATOR MK2H
D
290
D
290
421
Designed by
Drawn by
MPO
5
5
4
C
B
B
4
3
Base plate in silumin, cover in plastic.
421
Designed
by Date Drawn by
Checked
by
MPO
BOX 125 S-284 22 PERSTORP
SWEDEN
www.daab.se
6
C
2011-02-01
Produkt information
MK2 BOX 125 S-284 22 PERSTORP
SWEDEN
Sidomontage
www.daab.se
3
ScaleChecked by
Date
1:4
2011-02-01
Produkt information
MK2
Sidomontage
2
AObject No.
A
Object
No.
Scale
1:4
Replaces
Drw. No.
2
M43483
1
Sheet
1
REV.
Replaces
Drw. No.
M43483
1
D
290
C
267
C
4
261
C
4
140
140
267
C
D
5
This is an assembley drawing only FAAC cannot guarantee that all details are shown correctly and in scale, only stated measurements should be treated as correct.
290
D
261
D
5
267
OPERATOR MK2
6
140
6
267
1
140
2
261
3
This is an assembley drawing only FAAC cannot guarantee that all details are shown correctly and in scale, only stated measurements should be treated as correct.
*) Opening times apply to standard arms where the operator arm rotates 200° during opening/closing. **) Applies to 3-phase, 400 Volt.
4
This is an assembley drawing only FAAC cannot guarantee that all details are shown correctly and in scale, only stated measurements should be treated as correct.
5
421
B
A
Designed by
1
6
REV.
BOX 125 S-284 22 PERSTORP
SWEDEN
www.daab.se
5
Base plate in hot-dip galvanized steel, cover in stainless steel..
www.faac.se
Drawn by
Checked b
MPO
Sheet
4
3
Produkt in
MK2
Sidomonta
WOW - EN REKLAMBYRÅ!
OPERATOR M10
M10 is used on gates with leaves up to 12,000 mm and 1500 kg. Consult FAAC for other applications. Electric motors are available for single phase, or three-phase, 230, 400 or 500 Volt. Twin worm gears type DAAB M10. The gear case is made of aluminium.
Worm gears: The worm gears are made from special bronze and machined in special, highly-stable precision tools. All shafts have
bearings well dimensioned for the purpose. The gears are self-locking and the gear case is filled with a synthetic lubricant that
withstands temperatures down to - 45°C.
V-belt units
Bracket
V-belt
Gear case, Worm gear
Terminal block
Limit switch
Motor
Gear case, Cog gear
Limit cams
Manual release
Base plate
Motor Arm
MOTORBELT PULLEY MOTOR OUTPUT
REVS
CURRENT GEAR RATIO OUTPUT REVS TORQUE OPENING TIME
mm
kw**rpmA i
rpm
Nm sec*
40 0,37
1400
0,93
26500,532600
56
50 0,37
1400
0,93
21000,662100
45
71 0,37
1400
0,93
15000,941500
32
100 0,37
1400
0,93
10501,331065
23
125 0,37
1400
0,93
8501,66850
18
140 0,37
1400
0,93
7501,85760
16
*) Opening times apply to standard arms where the operator arm rotates 200° during opening/closing. **) Applies to 3-phase, 400 V.
OPERATOR M10
Base plate in hot-dip galvanized steel, cover in stainless steel.
FAAC NORDIC AB
BOX 125, SE-284 22 PERSTORP TEL. +46 (0)435 77 95 00 FAX +46 (0)435 77 95 29 [email protected]
www.faac.se