Plumbing Fixture Fittings File No. 3414 Issued To: Madg
Transcription
Plumbing Fixture Fittings File No. 3414 Issued To: Madg
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. Effective Date: July 2011 -Rev. 2/6/2012- Void After: July 2012 Product: Plumbing Fixture Fittings Issued To: Madgal Water Technologies Agricultural Cooperative Society Ltd. Kibbutz Glil Yam Hertila, MA Israel IDENTIFICATION: Plumbing supply fittings complying with this Standard shall be marked File No. 3414 with the manufacturer's recognized name, trademark, or other mark or, in the case of private labeling, the name, trademark or other mark of the customer for whom the fitting was manufactured. The marking shall be accomplished by use of a permanent mark or by placing a permanent label on the product. Markings on plumbing supply fittings shall be visible after installation. Single-handle, single-control, and automatic compensating mixing bath and shower valves shall have identifiable temperature control settings in which the settings are indicated by words ("cold", "warm", "hot", etc.), by numbers, or graphically. Packages shall be marked with the manufacturer's name, trademark, or other mark as well as the model number or, in the case of private labeling, the name, trademark, or mark of the customer for whom the fitting was manufactured as well as the model number. For the most accurate and updated information please visit http://pld.iapmo.org/3414 This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing. Page 2 -Rev. 2/6/2012- Void After: July 2012 Product: Plumbing Fixture Fittings File No. 3414 Issued To: Madgal Water Technologies Agricultural Cooperative Society Ltd. Automatic compensating valves shall be accompanied by instructions for their installation, adjustment, and servicing, which shall specify how the handle position or limit setting is to be adjusted. Listed products shall bear the cUPC® certification mark. CHARACTERISTICS: Fittings may include lavatory, sink, bath & shower, lawn and sediment faucets. To be installed in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code. Products comply with the applicable sections of the latest edition of the Uniform Plumbing Code®. Models listed to the National Plumbing Code of Canada and Relevant Canadian Standard(s) shall bear the cUPC mark of conformity. Manufactured in compliance with ASME A112.18.1-2005/CSA B125.1-2005 and ANSI/NSF 14-2010. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC 17025. Page 3 -Rev. 2/6/2012- Void After: July 2012 Product: Plumbing Fixture Fittings File No. 3414 Issued To: Madgal Water Technologies Agricultural Cooperative Society Ltd. MODELS: Eurogal Single Handle Kitchen Faucet With Pull-Out Spout: 7811 7812 7813 7814 7815 7816 7817 7818 7819 Eurogal Kitchen Faucet With Pull Out Spout: 7810 (Chrome) 7811 (White) 7813 (Red) 7817 (Bone) 7818 (Black) 7819 (Gray) Melody Kitchen Faucet With Pull Out Spout: 8160 (Chrome) 8161 (White) 8162 (Stainless Steel) 8163 (Bronze) 8164 (Brushed Nickel) 8165 (Satin) Pull 8180 8181 8810 8811 8812 8813 8814 8815 8816 8817 8818 8819 Out Faucet (Chrome) (White) (Chrome) (White) (Gold) (Red) (Brushed Nickel) (Satin) (Blue) (Bone) (Black) (Gray) Spray Head DOC#081A Page 4 -Rev. 2/6/2012- Void After: July 2012 Product: Plumbing Fixture Fittings Issued To: Madgal Water Technologies Agricultural Cooperative Society Ltd. 31018520 001 0400 001 0500 001 1400 ROXY ROXY Sprayer in CHROME Switch Sprayer in Polished Chrome GOURMET Sprayer in CHROME 38013510 001 0700 001 0714 001 1500 001 1550 INTEGRA INTEGRA S Sprayer in Polished Chrome INTEGRA C Sprayer in Polished Chrome OMBRA Sprayer in Polished Chrome OMBRA C Sprayer in Polished Chrome File No. 3414 DOC#081A Page 5 -Rev. 2/6/2012- Void After: July 2012 Product: Plumbing Fixture Fittings File No. 3414 Issued To: Madgal Water Technologies Agricultural Cooperative Society Ltd. ADDITIONAL COMPANY INFO: Home Depot Glacier Bay™ Kitchen Pull-Out Faucet: 142-809 163-473 233-969 785-564P Model No. 236 301 236 631 Description Melody Kitchen Faucet With Pull Out Spout Chrome Melody Kitchen Faucet With Pull Out Spout Stainless Steel Shower Pro SRL Spray Head ROXY 10 001 0400 10 001 0500 10 001 1400 ROXY Sprayer in CHROME Switch Sprayer in Polished Chrome GOURMET Sprayer in CHROME INTEGRA 10 001 0700 10 001 0714 10 001 1500 10 001 1550 INTEGRA S Sprayer in Polished Chrome INTEGRA C Sprayer in Polished Chrome OMBRA Sprayer in Polished Chrome OMBRA C Sprayer in Polished Chrome DOC#081A