Verbindungsmitt el / Lanyards Sharp edge rope „EDGER“ euroline®

Sharp edge rope „EDGER“ euroline®
When falling over an edge, there is a high risk that the user’s rope or lanyard is cut by a sharp edge leading to unhindered falling. Therefore we have developed the sharp edge rope EDGER with rope adjuster,
which also works with falls over real edges (radius even smaller than 0.5 mm) and is not cut through.
The steel rope core of our sharp edge rope even withstands a fall with factor 2 over a steel edge as well
as over a concrete edge (even with deflection, which is inevitable with swinging falls) and absorbs the
fall in a controlled way. The tape fall absorber (EN 355) reduces the occurring force to a body-bearable
degree of below 6 kN. Consequently falling over sharp edges of any material (wood, concrete, steel,
trapezoidal sheet metal, glass) with EDGER does not mean a threat to the user anymore.
Lengths up to 2 metres are used as a lanyard in order to position the working place (see fig. 1) and are
therefore delivered without tape fall absorber. Lengths of more than 2 metres can be used in fall arrest
and restraint systems, so they are delivered as standard with tape fall absorber on the fall arrester (see
fig. 2).
fig. 1
The fall arrester is clamped under spring tension to the rope and therefore well suited for restraint
systems on flat roofs, for instance.
The sharp edge rope EDGER is available with two different diameters of steel rope core:
- with 6 mm steel rope core - extremely light and flexible for general use, e.g. maintenance on flat roofs,
- with 8 mm steel rope core - very solid and safe against cutting through for sophisticated use with massive strain, such as pole climbers, tree cutters etc.
Core and sheath of the sharp edge rope EDGER are glued together, which avoids sheath slippage, increasing significantly the lifespan of EDGER.
fig. 2
-
TESTED
euroline sharp edge rope „EDGER“
6mm/3m
6mm/5m
6mm/10m
6mm/15m
Art. No. 400 497
Art. No 400 498
Art. No 400 499
Art. No 400 500
8mm/3m
8mm/5m
8mm/10m
8mm/15m
Art. No
Art. No
Art. No
Art. No
--
euroline sharpe edge lanyard „EDGER“
6mm/2m
8mm/2m
Art. No. 400 495
Art. No. 401 688
401 689
401 690
401 691
401 692
Authorisation: EN 354:2010 + prEN 354:2008 (appendix sharp edge test), EN 358:2000, EN353-2:2002
Verbindungsmittel / Lanyards
EDGE
- SHARP