Product Catalog - Specialty Communications

Product Catalog
Valid from April 2015
www.swissphone.com
Editorial
Disaster-Proven Paging
for Public Safety
Swissphone strives to lead in the invention, development and manufacturing of the industries most
advanced paging and critical messaging solutions.
Our Swiss quality offering, fulfills the highest demands of disaster proof paging requirements for
public safety organizations.
The market-leading Swissphone paging solutions
for emergency services have long ago become
prevalent standards. Swissphone products are
extremely popular in Europe and the U.S. due to
the high quality of devices offered, as well as our
extensive know-how and leading-edge experience
in the design and construction of paging networks.
In Germany alone, Swissphone has built 150
county wide paging networks with more than 4’000
base stations running over a half million pagers.
Swissphone was founded in 1969 by Helmut and
Erika Köchler and it has been under Swiss ownership ever since. The company has a prominent
market presence in Europe as well as in the U.S.
The corporate headquarters and the production
site are located in Switzerland near Zurich. Our US
office: Swissphone, LLC is located in Windsor, CO.
2
Product Catalog 2015
Impressum
Swissphone, LLC
1194 West Ash Street, Suite C
Windsor, CO 80550
Tel.:
Fax:
(800) 596-1914
(970) 460-3014
E-Mail: [email protected]
Web: www.swissphone.com
The content of this brochure is furnished for
informational use only, is subject to change, and
should not be construed as a commitment by
Swissphone, LLC.
Content
Analog Pagers
4
Pro Charger, Audio Charger
27
5
Charger s.QUAD
27
Overview6
Multi Charger Expert
27
s.QUAD Voice
7
Multi Charger LAN
27
RE729 / RE729 VoX
8
Programming Kit
28
RE629 / RE629 VoX
9
Programming Kit s.QUAD
28
Warranty Services
9
Efficient Fleet Management for Terminals
28
10
Chain, Lanyard
28
11
Clip, Holster
29
Technical Features and Dimensions
Digital Pagers
Technical Features and Dimensions
Overview12
Antennas29
s.QUAD X15
14
Leather Holster
29
s.QUAD X35
15
Nylon Holster
29
DE91516
DiCal Network Architecture
30
DE93517
DiCal-PNC III Server
32
HURRICANE DUO
DiCal-PNC III Red-Server
33
DE920Ex19
Options
33
IDR - Intelligent Data Receiver
20
POCSAG Base Stations
34
Warranty Services
18
DiCal-ITC2100 P-S
34
ITC300 Transmitter
21
DiCal-ITC2100 M-P34
IDEA™ Encryption
22
Options34
Efficient Fleet Management for Terminals
23
DiCal-ITC2100 High Power
24
Services35
FFRS - Firefighter Response System and s.ONE
Firefighter Response System
18
35
24
s.ONE25
Accessories26
Standard Charger, Car Charger
26
Product Catalog 2015
3
Analog Pagers
Reliable and robust analog Fire Pager
All our products are made in Switzerland to ensure a persuasive combination of quality and functionality. Stateof-the-art technology, excellent reception and its handy format make the Swissphone analog Fire Pagers the
best in class. The Swissphone compact casing is exceptionally robust thanks to its two interlocking convex
halves. Further protection is provided by surrounding rubber cushioning.
PLL
Two frequencies can be programmed within ± 0.5 MHz (± 1.0 MHz) using PLL technology (PhaseLocked Loop).
Wide PLL: The reception frequency can be programmed within a Bandwidth of up to 10 MHz via
the diverse profiles.
All Swissphone pagers are narrowband-ready, they operate on 25kHz and 12kHz systems
independent of any hardware or software changes.
Stored Voice Memory: Up to 16 minutes voice memory, divisible, can be set as fixed or dynamic.
Voice Announced User Interface: Easy change of channels by a push button interface with voice
support.
4
Product Catalog 2015
Analog Pagers
Technical Features and Dimensions
Frequency Band
description
Band
Frequency Band [MHz]
VHF-B
150.0 - 160.0
2 m UB
146.0 - 155.0
2 m MB
155.0 - 164.0
2 m OB
164.0 - 174.0
UHF G / H
450.0 - 470.0
VHF
151.0 -160.0
Modulation
FM / PM (programmable)
Tone Systems
s.QUAD Voice
RE629
RE629 VoX
RE729
RE729 VoX
Multi-channel,
Scanner option
For REx29 and s.QUAD Voice
allows the pager to utilize several
different receiving frequencies
Compliance
Norms
EN 300-296-2, EN 300-341-2
IEC 60529:1991+A1:2000 (IP54)
IEC 60068-2-27 (shock)
IEC 600068-2-32 (drop test)
IEC 60069-2-6 (vibration)
2.5 inches / 64 mm
3.1 inches / 78 mm
2-tone
2- / 5-tone
2- / 5-tone
2- / 5-tone
2- / 5-tone
3.2 inches / 81 mm
2.1 inches / 53 mm
Original size:
3.2 x 2.5 x 0.85 inches
81 x 64 x 22 mm
Original size:
3.1 x 2.1 x 0.95 inches
78 x 53 x 24 mm
Product Catalog 2015
5
Analog Pagers
Overview
Paging
Bluetooth Connect
Hybrid Alert
Active Response
Frequency Bands
Channel Spacing
[kHz]
Sensitivity
[µV / m]
Frequency processing VHF
UHF
Tone systems
Addresses
User Profiles
Multi-Colored Alarm LED
Smartphone Interface
Weight (incl. battery)
Alert display
Acoustic @ 1 feet distance
Alert memory
Alert timer / time stamp
Memory for voice messages
s.QUAD Voice
●
●
●
●
VHF / UHF 1)
RE729
●
RE729 VoX
●
RE629
●
RE629 VoX
●
VHF 2 m
VHF 2 m
2- or 5-tone
32
8
VHF 2 / 4 m
UHF G / H
12.5 or 20 / 25
< 3.5
PLL ± 0.5 MHz
PLL ± 1.0 MHz
2- or 5-tone
32
50 + 1 extension
VHF 2 / 4 m
UHF G / H
12.5 or 20 / 25
< 3.5
PLL ± 0.5 MHz
PLL ± 1.0 MHz
2- or 5-tone
32
8
3.95 oz. / 112 g
●
3.95 oz. / 112 g
●
3.95 oz. / 112 g
●
●
●
●
●
●
50
AA
165
180
IP54
●
●
4 minutes
dynamic and fix
●
●
●
●
50
AA
165
180
IP54
●
Various
●
Various
12.5 or 20 / 25
12.5 or 20 / 25
< 2.0
< 3.5
WPLL (up to 10 MHz) PLL ± 4.5 MHz
WPLL
2-tone
2- or 5-tone
64
32
64
50 + 1 extension
●
●
3.81 oz. / 108 g
3.95 oz. / 112 g
●
●
> 95 dB (A)
●
●
●
Time-Stamp
up to 16 min
4 minutes
dynamic and fix
●
●
Clock display
●
●
Monitoring function
●
●
Volume adjustment
●
●
Vibration Alert
50
Option (MK / SC) multi-channel
64
Standard battery type
AA
AA
Operating time dry cell [h]
165
165
Operating time NiMH
[h]
180
180
IP protection
IP67
IP54
●
Analog-to-Digital 2)
3)
●
●
PSW Plus
Accessories
Various
Various
1)
3)
6
12.5 or 20 / 25
< 3.5
PLL ± 4.5 MHz
4 minutes
dynamic and fix
Some bands on request only 2) Migrate from 2-tone to digital-alerting by upgrading the Firmware
Programmingsoftware: PSW Plus
Product Catalog 2015
4 minutes
dynamic and fix
●
●
●
50
AA
165
180
IP54
●
Various
Analog Pagers
s.QUAD Voice
••
••
••
••
••
••
••
••
••
••
••
Excellent reception
Switching bandwidth programmable up to 10 MHz (Wide PLL)
64 addresses
64 selection and switching profiles possible
Alerting volume > 95 dB(A) at 30 cm / 12 inches distance
Multi-colored alarm LED
Five-level display of signal strength (RSSI)
Fully graphic, high-resolution display (for message display via Bluetooth)
Extremely robust (2-m drop test) and water-proof (IP67)
Up to 16 minutes of stored voice memory
Optional: Multi-channel / scanner in one device
Frequency Bands
Channel Spacing
Frequency processing
Addresses
Power management
Languages Options
Band
VHF-B
2 m UB
2 m MB
2 m OB
UHF E / F
UHF G / H
VHF 2 m / UHF
12.5 kHz or 20 / 25 kHz
VHF Wide PLL: (150-160 MHz, 146-155 MHz, 155-164 MHz, 164-174 MHz)
UHF Wide PLL: (430-450 MHz, 450-470 MHz)
64 addresses
AA battery, dry cell 1.5 V or NiMH 1.2 V
Charger interface
Czech, Danish, Dutch, English, French, German, Italian, Polish, Slovenian, Swedish, others upon request
Multi-channel (8)
5 / 6 tone decoding
Hybrid Alert
Active Response
Channel Spacing
12.5 kHz
12.5 kHz
12.5 kHz
12.5 kHz
Art. No.
0810239
0810209
0810219
0810229
Band
VHF-B
2 m UB
2 m MB
2 m OB
12.5 kHz
12.5 kHz
0810365
0810385
UHF E / F
UHF G / H
Channel Spacing
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
Art. No.
0810238
0810208
0810218
0810228
20 / 25 kHz
20 / 25 kHz
0810364
0810384
Additional frequencies upon request
Note: Chargers are not included in Pager item code.
Product Catalog 2015
7
Analog Pagers
RE729 / 729 VoX
The Classic / The VoX Model
••
••
••
••
••
••
32 addresses with 50 user profiles to fit the requirements of almost any assignment
LCD for clarity at a glance
Frequency synthesizing via PLL keeps down set-up times for activation
Four minutes voice memory, divisible, can be set as fixed or dynamic
Clock and alert display
IP54 protection ensures reliable alerting in a wide variety of weather conditions
Frequency Bands
VHF 2 m
Channel Spacing
12.5 kHz or 20 / 25 kHz
Frequency processing
VHF: PLL (± 4.5 MHz)
Addresses32
User profiles
50+1 extension
Alert timerYes
Memory for voice message
4 minutes, can be divided, dynamic and fixed
Display
4-digit “address names”
Power management
Type AA battery, dry cell 1.5 V, or Rechargeable (NiMH)
Operating time
Dry Cell
165 h
NiMH rechargeable
180 h
The Classic
Graphical user interface
The VoX Model
Acoustic user interface
Channels
Multi
Single
Multi
Single
tone
2-tone
2-tone
5-tone
5-tone
Channel Spacing
12.5 kHz
12.5 kHz
12.5 kHz
12.5 kHz
Frequency range
151-160 MHz
151-160 MHz
151-160 MHz
151-160 MHz
Note: Chargers are not included in Pager item code.
8
Product Catalog 2015
RE729
Art. No.
0899038
0894038
0889038
0884038
RE729 VoX
Art. No.
0899039
0894039
0889039
0884039
Analog Pagers
RE629 / RE629 VoX
The Classic / The VoX Model
••
••
••
••
••
••
32 addresses with 50 user profiles to fit the requirements of almost any assignment
LCD for clarity at a glance
Frequency synthesizing via PLL keeps down set-up times for activation
Four minutes voice memory, divisible, can be set as fixed or dynamic (RE629 sv)
Clock and alert display
IP54 protection ensures reliable alerting in a wide variety of weather conditions
Frequency Bands
VHF 2 m
UHF G / H
Channel Spacing
12.5 kHz or 20 / 25 kHz
Frequency processing
VHF: PLL (± 0.5 MHz)
UHF: PLL (± 1.0 MHz)
Addresses32
User profiles
50+1 extension
Alert timeryes
Memory for voice message
4 minutes, can be divided, dynamic and fixed
Display
4-digit “address names”
Power management
Type AA battery, dry cell 1.5 V, or Rechargeable (NiMH)
Operating time
Dry cell
165 h
NiMH rechargeable
180 h
The Classic
Graphical user interface
The Vox Model
Acoustic user interface
Channels
Multi
Single
Single
Multi
Single
Multi
Single
Multi
tone
2-tone
2-tone
2-tone
2-tone
2-tone
2-tone
2-tone
2-tone
Channel Spacing
12.5 kHz
12.5 kHz
12.5 kHz
12.5 kHz
12.5 kHz
12.5 kHz
12.5 kHz
12.5 kHz
Frequency range
146-155 MHz
146-155 MHz
155-164 MHz
155-164 MHz
164-174 MHz
164-174 MHz
450-470 MHz
450-470 MHz
RE629
Art. No.
0899214
0894214
0894218
0899218
0894222
0899222
0894276
0899276
RE629 VoX
Art. No.
0899213
0894213
0894217
0899217
0894221
0899221
0894274
0899274
Note: Chargers are not included in Pager item code.
Warranty Services
Extended Warranties for analog Pagers
Description
Total 3 years REX29 / s.QUAD Voice warranty
Total 4 years REX29 / s.QUAD Voice warranty
Total 5 years REX29 / s.QUAD Voice warranty
Art. No.
3yWa
4yWa
5yWa
Product Catalog 2015
9
Digital Pagers
All Swissphone alert Pagers are characterized by their ruggedness, reliability and compliance with the strictest
international regulations. Swissphone offers the best solution for the most diverse demands.
PLL
The reception frequency can be programmed within ± 0.5 MHz (± 1.0 MHz) using PLL technology
(Phase-Locked Loop).
Wide PLL: The reception frequency can be programmed within a Bandwidth of up to 10 MHz via
the diverse profiles.
The IDEA™ Encryption Technology employed by Swissphone allows secure transmission of
confidential POCSAG messages.
eco
mode
During ECO mode, reception sensitivity is enhanced and this useful feature further increases the
rechability of the user.
Hybrid combines the reliability of a paging alert with the benefits of commercial mobile telecommunications networks. The alert message is sent to the pager via paging and cellular. Only the fastest
of the alert messages is displayed on the pager screen and the other is suppressed.
Text-to-Speech: The only POCSAG pager that speaks.
Multifrequency: The pager can receive alerts from different networks.
All Swissphone pagers are narrowband-ready; They operate on 25kHz and 12kHz systems
independent of any hardware or software changes.
GLOB is a replace text pattern option that allows you to either suppress text or replace it with
constant text.
Bluetooth technology makes it possible to connect the s.QUAD with a compatible smartphone
and ultimately with various s.ONE software solutions from Swissphone. This includes, among other
things, the display of the availability of the emergency services and the resources as well as the
strength of the team.
10 Product Catalog 2015
Digital Pagers
Technical Features and Dimensions
Frequency Band description
Band
Frequency Band [MHz]
VHF-B
150-160
2 m UUB
138 - 146
2 m UB
146 - 155
2 m MB
155 - 164
2 m OB
164 - 174
UHF A / B
UHF B / C
UHF C / D
UHF D / E
UHF E / F
UHF F / G
UHF G / H
Compliance
Norms
ETSI EN 300 390, TR-BOS DME II
EN 60068-2-27 (shock)
EN 60068-2-6 (vibration)
EN 60068-2-32 (drop test)
EN 60529:1991 + A1:2000 (IP52)
-
-
-
-
-
-
-
410
420
430
440
450
460
470
3.11 inches / 79 mm
390
400
410
420
430
440
450
2.1 inches / 53 mm
2.5 inches / 64 mm
3.1 inches / 78 mm
Original size:
3.11 x 2.1 x 0.95 inches
79 x 53 x 24 mm
3.2 inches / 81 mm
2.1 inches / 53 mm
Original size:
3.2 x 2.5 x 0.85 inches
81 x 64 x 22 mm
Original size:
3.1 x 2.1 x 0.95 inches
78 x 53 x 24 mm
Product Catalog 2015 11
Digital Pagers
Overview
Paging
Text
Speech
Bluetooth Connect
Hybrid Alert
Active Response
Frequency Bands
Channel Spacing
[kHz]
Sensitivity @ 512B [µV / m]
Frequency processing
Addresses
(RIC incl. subaddresses)
Frame independent
Alerting
Acoustic @ 1 feet distance
Alert profiles
Vibrator
Light
Display and Housing
Lines x character per line
Weight (incl. battery)
Messages
Message memory
Time stamp
Pre-programmed messages
Message folder / storage
Message printing
Power management
Battery type
Operating time dry cell
regular / ECO mode
[h]
Operating time NiMH
regular / ECO mode
[h]
Miscellaneous
Option IDEATM Encryption
Express Alarm®
On-air programming
Option multi channel
ATEX / Intrinsically Safe
IP protection
Accessories
1)
s.QUAD X15
●
●
s.QUAD X35
●
●
●
●
●
VHF 2 m
UHF E / F G / H
12.5 or 20 / 25
< 2.5
Wide PLL
●
●
●
VHF 2 m
UHF E / F G / H
12.5 or 20 / 25
< 2.5
Wide PLL
16 (64)
64 (256)
> 95 dB (A)
3 select- or
toggle profiles
●
Backlight
Alert LED
> 95 dB (A)
64 select- or
toggle profiles
●
Backlight
multi-color Alert LED
DE915
●
●
DE935
●
●
HURRICANE DUO
VHF 2 m
UHF E / F G / H
12.5 or 20 / 25
< 3.0
Wide PLL
UHF: PLL
16 (64)
VHF 2 m
UHF E / F G / H
12.5 or 20 / 25
< 3.0
Wide PLL
UHF: PLL
64 (256)
VHF 2 m
UHF G / H
12.5 or 20 / 25
< 3.0
VHF: Wide PLL
UHF: PLL
64 (256)
> 85 dB (A)
3 select- or
toggle profiles
●
flash light with
two-color 5) LED
> 85 dB (A)
64 select- or
toggle profiles
●
flash light with
two-color 5) LED
> 85 dB (A)
64 select- or
toggle profiles
●
Backlight +
alert LED
3x16, 4x20, 4x21, 5x21
full graphic
3.46 oz. / 98 g
3x11, 5x16 3)
full graphic
3.88 oz. / 110 g
146x128 HighRes 146x128 HighRes 3x16, 4x20, 5x21
full graphic*
full graphic*
full graphic
3.81 oz. / 108 g
3.81 oz. / 108 g
3.46 oz. / 98 g
●
●
●
> 100 (8k)
●
64 x 32 char
> 100 (8k)
●
256 x 32 char
3
> 100 (8k)
●
64 x 32 char
> 100 (8k)
●
128 x 32 char
3
> 100 (8k)
●
128 x 32 char
3
AA
AA
AA
AA
AA
700 / 2500
700 / 2500
900 / 1200
900 / 1200
600
700 / 2400
700 / 2400
800 / 1100
800 / 1100
600
●
●
●
●
●
●
Scanner
●
●
●
●
●
●
Scanner
●
●
●
Scanner
IP67
Various
IP67
Various
IP52 / IP54 2)
Various
IP52 / IP54 2)
Various
IP54
Various
Rechargeable Battery 2) With leather case 3) Proportional characters 4) Please refer to page 18 5) bi-color
* Several different font size (6, 7, 8 lines), up to 200 characters per page
12 Product Catalog 2015
Digital Pagers
Paging
Text
Speech
Bluetooth Connect
Hybrid Alert
Active Response
Frequency Bands
Channel Spacing
[kHz]
Sensitivity @ 512B [µV / m]
Frequency processing
Addresses
(RIC incl. subaddresses)
Frame independent
Alerting
Acoustic @ 1 feet distance
Alert profiles
Vibrator
Light
Display und Housing
Lines x character per line
Weight (incl. battery)
Messages
Message memory
Time stamp
Pre-programmed messages
Message folder / storage
Message printing
Power management
Battery type
Operating time dry cell
regular / ECO mode
[h]
Operating time NiMH
regular / ECO mode
[h]
Miscellaneous
Option IDEATM Encryption
Express Alarm®
On-air programming
Option multi channel
ATEX / Intrinsically Safe
IP protection
Accessories
DE920Ex
●
●
IDR
●
●
VHF 2 m
UHF E / F G / H
12.5 or 20 / 25
< 3.0
PLL
VHF 2 m
UHF E / F G / H
12.5 or 20 / 25
N.A. 4)
VHF: PLL
UHF: Wide PLL
32 (128)
32 (128)
> 85 dB (A)
9 + 1 extension
●
Backlight
3x16
N.A.
64 select- or
toggle profiles
N.A.
N.A.
3.10 oz. / 88 g
15 x 253 char
●
128 x 32 char
2 (4096 char)
possible
> 100 (8k)
●
128 x 32 char
●
AA / AAA 1)
900 / 1100
410 / 500
●
●
●
●
●
IP52 / IP54 2)
Various
●
●
●
Product Catalog 2015 13
Digital Pagers
s.QUAD X15
•• Excellent reception
•• Switching bandwidth programmable up to 10 MHz (Wide PLL)
•• 16 addresses (RICs) with four sub-addresses each
(64 individual addresses)
•• Three selection and switching profiles possible
•• Alerting volume > 95 dB(A) at 1 feet / 30 cm distance
•• Fully graphic, high-resolution display for over 200 characters per page
•• Extremely robust (2-m drop test) and water-proof (IP67)
•• Optional: IDEA™ message encryption (128 bit)
•• Bluetooth Connect
Frequency Bands
VHF 2m / UHF
Channel Spacing
12.5 kHz or 20 / 25 kHz
Baudrate
512 / 1200 / 2400
Frequency Processing
VHF Wide PLL: (146-155 MHz, 155-164 MHz, 164-174 MHz)
UHF PLL: (430-440 MHz, 440-450 MHz, 450-460 MHz, 460-470 MHz)
Addresses
16 RIC (64 subaddresses)
Power management
Type AA battery, dry cell 1.5 V or NiMH 1.2 V
Charger interface
Operating time
Regular
dry cell: 700 h NiMH: 700 h
ECO mode
dry cell: 2500 h NiMH: 2400 h
Languages
Czech, Danish, Dutch, English, French, German, Italian,
Polish, Slovenian, Swedish, others upon request
OptionsExpress-Alarm®
On-air programming (OAP)
IDEA™ Encryption
Hybrid Alert
Active Response
Band
VHF-B
2 m UB
2 m MB
2 m OB
UHF E / F
UHF G / H
Channel Spacing
12.5 kHz
12.5 kHz
12.5 kHz
12.5 kHz
Art. No.
0810235
0810205
0810215
0810225
Band
VHF-B
2 m UB
2 m MB
2 m OB
12.5 kHz
12.5 kHz
0810361
0810381
UHF E / F
UHF G / H
Additional frequencies upon request
Note: Chargers are not included in Pager item code.
14 Product Catalog 2015
Channel Spacing
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
Art. No.
0810234
0810204
0810214
0810224
20 / 25 kHz
20 / 25 kHz
0810360
0810380
Digital Pagers
s.QUAD X35
•• Excellent reception
•• Switching bandwidth programmable up to 10 MHz (Wide PLL)
•• 64 addresses (RICs) with four sub-addresses each
(256 individual addresses)
•• 64 selection and switching profiles possible
•• Alerting volume > 95 dB(A) at 1 feet / 30 cm distance
•• Multi-colored alarm LED
•• Five-stage display of signal strength (RSSI)
•• Fully graphic, high-resolution display for over 200 characters per page
•• Extremely robust (2-m drop test) and water-proof (IP67)
•• Optional: IDEA™ message encryption (128 bit)
•• Optional: Multi-channel / scanner in one device
•• Bluetooth Connect
Frequency Bands
VHF 2m / UHF
Channel Spacing
12.5 kHz or 20 / 25 kHz
Baudrate
512 / 1200 / 2400
Frequency Processing
VHF Wide PLL: (146-155 MHz, 155-164 MHz, 164-174 MHz)
UHF PLL: (± 1.0 MHz)
Addresses
64 RIC (256 subaddresses)
Power management
Type AA battery, dry cell 1.5 V or NiMH 1.2 V
Charger interface
Operating time
Regular
dry cell: 700 h NiMH: 700 h
ECO mode
dry cell: 2500 h NiMH: 2400 h
Languages
Czech, Danish, Dutch, English, French, German, Italian,
Polish, Slovenian, Swedish, others upon request
OptionsExpress-Alarm®
On-air programming (OAP)
IDEA™ Encryption
Multi-channel / scanner
Hybrid Alert
Active Response
Band
VHF-B
2 m UB
2 m MB
2 m OB
UHF E / F
UHF G / H
Channel Spacing
12.5 kHz
12.5 kHz
12.5 kHz
12.5 kHz
Art. No.
0810237
0810207
0810217
0810227
Band
VHF-B
2 m UB
2 m MB
2 m OB
12.5 kHz
12.5 kHz
0810363
0810383
UHF E / F
UHF G / H
Channel Spacing
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
Art. No.
0810236
0810206
0810216
0810226
20 / 25 kHz
20 / 25 kHz
0810362
0810382
Additional frequencies upon request
Note: Chargers are not included in Pager item code.
Product Catalog 2015 15
Digital Pagers
DE915
•• Full graphic LC-Display
•• Up to 10 MHz of programmable Bandwidth (Wide PLL)
•• 16 RIC with up to four sub-addresses each (64 independent addresses)
•• 3 select- or toggle-profiles
•• 64 RIC names with eight characters
•• Simple 3-button operation
•• Charger interface
Frequency Bands
VHF / UHF
Channel Spacing
12.5 kHz or 20 / 25 kHz
Baudrate
512 / 1200 / 2400
Frequency Processing
VHF:
146-155 MHz, 155-164 MHz, 164-174 MHz
UHF: ± 1.0 MHz
Addresses
16 RIC (64 subaddresses)
Power management
Type AA battery, dry cell 1.5 V or NiMH 1.2 V
Charger interface
Operating time
Regular
dry cell: 900 h NiMH: 800 h
ECO mode
dry cell: 1200 h NiMH: 1100 h
Languages
English, French, Spanish and Others upon request
OptionsExpress-Alarm®, On-air programming (OAP), IDEA™ Encryption
Wideband / Narrowband
Narrowband
Narrowband
Narrowband
Narrowband
Narrowband
Wideband
Wideband
Wideband
Wideband
Wideband
Channel Spacing
12.5 kHz
12.5 kHz
12.5 kHz
12.5 kHz
12.5 kHz
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
Note: Chargers are not included in Pager item code.
16 Product Catalog 2015
Frequency range
146-155 MHz
155-164 MHz
164-174 MHz
430-450 MHz
450-470 MHz
146-155 MHz
155-164 MHz
164-174 MHz
430-450 MHz
450-470 MHz
Art. No.
0853101
0853111
0853121
0853161
0853181
0853100
0853110
0853120
0853160
0853180
Digital Pagers
DE935
••
••
••
••
••
••
••
••
Full graphic LC-Display
Up to 10 MHz of programmable Bandwidth (Wide PLL)
64 RIC with up to four sub-addresses each (256 independent addresses)
64 select- or toggle-profiles
256 RIC names with eight characters
Received signal indication (RSSI)
Simple 3-button operation
Charger interface
Frequency Bands
Channel Spacing
Baudrate
Frequency Processing
Addresses
Power management
Operating time
Languages
Options
Wideband / Narrowband
Narrowband
Narrowband
Narrowband
Narrowband
Narrowband
Wideband
Wideband
Wideband
Wideband
Wideband
VHF / UHF
12.5 kHz or 20 / 25 kHz
512 / 1200 / 2400
VHF:
146-155 MHz, 155-164 MHz, 164-174 MHz
UHF: (430-440 MHz, 440-450 MHz, 450-460 MHz, 460-470 MHz)
64 RIC (256 subaddresses)
Type AA battery, dry cell 1.5 V or NiMH 1.2 V
Charger interface
Regular
dry cell: 900 h NiMH: 800 h
ECO mode
dry cell: 1200 h NiMH: 1100 h
English, French, Spanish and Others upon request
On-air programming (OAP), IDEA™ Encryption,
Multi channel / scanner
Channel Spacing
12.5 kHz
12.5 kHz
12.5 kHz
12.5 kHz
12.5 kHz
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
Frequency range
146-155 MHz
155-164 MHz
164-174 MHz
430-450 MHz
450-470 MHz
146-155 MHz
155-164 MHz
164-174 MHz
430-450 MHz
450-470 MHz
Art. No.
0853201
0853211
0853221
0853361
0853381
0853200
0853210
0853220
0853360
0853380
Note: Chargers are not included in Pager item code.
Product Catalog 2015 17
Digital Pagers
HURRICANE DUO
Digital Pager with Text-to-Speech
•• Full graphic LC-Display
•• 64 RIC with up to 4 subaddresses each
(256 independent adresses)
•• 64 select- or toggle-profiles
•• 256 RIC names with eight characters
•• Received signal indication (RSSI)
•• Simple 2-button operation
•• Charger interface
•• Volume > 85 dB(A) at 1 feet / 30 cm distance
Frequency Bands
Channel Spacing
Baudrate
Frequency Processing
Addresses
Power management
Operating time
Languages
Available Voices
for Speech output Options
Wideband / Narrowband
Narrowband
Narrowband
Narrowband
Narrowband
Wideband
Wideband
Wideband
Wideband
VHF / UHF
12.5 kHz or 20 / 25 kHz
512 / 1200 / 2400
PLL (VHF 146-155 MHz, 155-164 MHz, 164-174 MHz; UHF + / - 1.0 MHz)
64 RIC (256 subaddresses)
Type AA battery, dry cell 1.5 V or NiMH 1.2 V
Charger interface
Dry cell: 600 h
NiMH: 600 h
English, French, Spanish and Others upon request
Arabic (f / m), Belgian (f), Danish (f), German (f / m), English UK (f / m),
English US (f / m), Finnish (f), French(f / m), Italian (f / m), Dutch (f / m),
Norwegian (f / m), Polish (f), Portuguese (f), Swedish (f / m),
Spanish (f / m), Czech (f)
Express-Alarm®, On-air programming (OAP),
IDEA™ Encryption, Multi channel
Channel Spacing
12.5 kHz
12.5 kHz
12.5 kHz
12.5 kHz
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
Note: Chargers are not included in Pager item code.
18 Product Catalog 2015
Frequency range
146-155 MHz
155-164 MHz
164-174 MHz
450-470 MHz
146-155 MHz
155-164 MHz
164-174 MHz
450-470 MHz
Art. No.
0852201
0852211
0852221
0852383
0852200
0852210
0852220
0852382
Digital Pagers
DE920Ex
Mobile Alerting in hazardous Areas
••
••
••
••
••
••
••
Intrinsically Safe
3-line backlit LC-Display with large character set
32 RIC, each with 4 subaddresses
9 alerts / user profiles plus 1 extension
Simple 3-button operation
Charger interface
PIN protection
Reliable even in case of a component failure (ATEX) II 2G Ex ib IIC T4
Frequency Bands
VHF / UHF
Channel Spacing
12.5 kHz or 20 / 25 kHz
Baudrate
512 / 1200 / 2400
Frequency Processing
PLL (VHF ± 0.5 MHz, UHF ± 1.0 MHz)
Addresses
32 RIC (128 subaddresses)
Power management
Type AA battery, NiMH 1.2 V
Type AA battery, dry cell 1.5 V
Charger interface
Operating time
Regular
NiMH:
410 h dry cell: 900 h
Eco-mode
NiMH:
500 h
dry cell: 1100 h
Languages
2 selectable
English, French, Spanish and Others upon request
OptionsExpress-Alarm®, On-air programming (OAP), IDEA™ Encryption, ATEX,
Multi channel
Wideband / Narrowband
Narrowband
Narrowband
Narrowband
Narrowband
Narrowband
Wideband
Wideband
Wideband
Wideband
Wideband
Wideband
Channel Spacing
12.5 kHz
12.5 kHz
12.5 kHz
12.5 kHz
12.5 kHz
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
20 / 25 kHz
Frequency range
146-155 MHz
155-164 MHz
164-174 MHz
430-450 MHz
450-470 MHz
138-146 MHz
146-155 MHz
155-164 MHz
164-174 MHz
430-450 MHz
450-470 MHz
Art. No.
0882701
0882711
0882721
0882861
0882881
0882730
0882700
0882710
0882720
0882860
0882880
Note: Chargers are not included in Pager item code.
The DE920Ex is approved for use in areas with easily ignitable gas-air mixtures and is thus tailor-made
for the needs of the chemical and oil industries. This robust, compact pager is ideal for those working in
such dangerous environments and need to be on call at all times. Even in sensitive zones, the pager can
be used safely thanks to its passive RF reception characteristic and protection devices.
II 2G Ex ib IIC T4
II
2
G
Ex
ib
IIC
T4
Device group all areas except mining (Group I)
Device category for use in zones 1 and 2
Area of application Indicator of atmosphere type (G=gas)
Ex-standard certified explosion protection in accordance
with standard EN 50014, 50020
Type of protection against ignition limited energy level prevents
ignition of the atmosphere
Explosion group CENELEC reference, highest classification in this
explosion group, typical gas: Hydrogen (ignition energy < 60μJ)
Temperature class maximum permitted temperature of equipment
casing or any component: 135° C
Product Catalog 2015 19
Digital Pagers
IDR - Intelligent Data Receiver
The IDR 200 / 250 and IDR 300 receivers can output messages
via an RS232 interface or Ethernet interface. IDR 200 / 250
features one isolated relay output as standard. If more than one output is needed,
an option featuring six outputs is available. These outputs can be controlled
individually and easily via the POCSAG network.
••
••
••
••
IDR 200 / 250
IDR 300
Serial or LAN interface for message and raw data outputs
Entire address range or 128 sub-ranges can be evaluated (transparent mode)
Up to 6 individually programmable digital outputs (IDR 200 / 1 output, IDR 250 / 6 outputs)
Absolute level measurement (RSSI in dBm)
CompliantsEN300113
Power management
Input voltage: 5 VDC power supply plug
Sensitivity @ 512 Bit / s
VHF: -117 dBm
UHF: -123 dBm
@ 1200 Bit / s
VHF: -116 dBm
UHF: -121 dBm
@ 2400 Bit / s
VHF: -115 dBm
UHF: -119 dBm
Level measurement (RSSI)
From -48 dBm (max.) to -105 dBm (min. – accuracy ± 5 dB)
OptionsExpress-Alarm®, IDEA™ Encryption, Turbo paging, On-air Programming
Size
46 x 107 x 198 mm
1.8 x 4.2 x 7.8 inches
POCSAG
Frequency bands
Channel spacing
Baudrate
Frequency Processing
Addresses
VHF 2 m
UHF 70 cm
12.5 kHz or 20 / 25 kHz
512 / 1200 / 2400
PLL (VHF ± 0.5 MHz, UHF ± 10 MHz)
32 RIC (128 subaddresses)
Description
IDR 200 - USB RS232
IDR 250 - USB RS232 I / O
IDR 300 - LAN
Art. No.
0723422
0723421
0723420
Warranty Services
Extended Warranties for digital Pagers
Description
Total 2 years DE9xx / s.QUAD warranty
Total 3 years DE9xx / s.QUAD warranty
Total 4 years DE9xx / s.QUAD warranty
Total 5 years DE9xx / s.QUAD warranty
20 Product Catalog 2015
Art. No.
D2yWa
D3yWa
D4yWa
D5yWa
DIgital Pagers
ITC300 Transmitter
The ITC300 is a paging network transmitter used to expand radio coverage of a Swissphone «on-site»
POCSAG paging system. It is easily connected over the LAN.
Description: Mains powered, Input voltage range from 90-240 VAC / 50-60Hz
There are three options available:
•• An integrated battery (2Ah) allows uninterruptable operation for up to 6 h
•• Three dry input contacts
•• Door contact (gives a signal when frontdoor will open or close)
The output power can be adjusted from 1 up to 25W in 1W steps
Interface:
LAN interface, Protocol TAP, ASCI simple
Hardware:
There is no additional HW necessary
Software:
Demonstration software available on request
Description
Designation
Art. No.
ITC300-VHF2
0722262
ITC300-UHF1
0722261
25W wall mounted transmitter box, 136 to 174 MHz
Tx-output power ex-factory adjustable: 1, 5, 12, 25W
230VAC / 50Hz powered, (Optional: back-up power 12V / 2Ah)
Antenna connector 50 ohm N-Type
Ex-factory adjusted for:
Tx-frequency:……MHz
Channel Spacing: ……kHz
Output power:
……W
25W wall mounted transmitter box, 400 to 470 MHz
Tx-output power ex-factory adjustable: 1, 5, 12, 25W
230VAC / 50 Hz powered, (Optional: back-up power 12V / 2Ah)
Antenna connector 50 ohm N-Type
Ex-factory adjusted for:
Tx-frequency:……MHz
Channel Spacing: ……kHz
Output power:
……watt
Options
Description
Integrated back-up power (2Ah)
Three dry input contacts
Door contact
Art. No.
0722128
0722129
0722130
Product Catalog 2015 21
DIgital Pagers
IDEA™ Encryption
Secure Paging
IDEA™ Facts:
•• Encoded messages from input
to pager (end-to-end)
•• Secure against subsequent
replaying of alerting messages
(time authentication)
•• Integration into the existing
environment
•• Clever code management
Swissphone IDEA™ encodes alerting messages so that eavesdroppers or hackers cannot read it but that authorized
parties can. Thus, Swissphone digital alerting is not just fast - but secure as well.
Secure paging
Swissphone IDEA™ encryption is an option to all of our digital paging systems, and provides unparalleled confidentiality. All messages are encoded starting from their input all the way to the receiving pagers. Swissphone IDEA™ allows
shorter transmission times and requires less memory as the AES standard, but provides the same security.
Communicated information
Mission orders issued by security or emergency services often contain confidential information. Whenever this type of
sensitive information is communicated, it must be protected from external interference to the highest possible degree.
This particularly applies to paging, a technology that is now indispensable in alarm systems.
Clever code management
Security cannot be achieved from a good lock alone – it is also important that only a few people have the keys and
that these are also kept suitably secure. The keys should be periodically changed to maintain security. Swissphone
has developed a clever code management system for this purpose, making it possible to change codes securely via
the wireless interface. It is not necessary to bring the pager back in to change the codes, and even if the pager gets
lost, the codes still cannot be read.
Integration into existing environment
IDEA™ secure paging from Swissphone is easy to integrate into an existing environment. Swissphone will assist any
project with the integration of IDEA™ secure paging.
Alarm input
terminals
Secure Access
Network
911
HTTPS
Emergency center
Secure IP Network
Working place
Telephone
WAN / LAN
GSM / UMTS / LTE
Microwave link
Paging
Network Controller
(Redundant)
Distribution
Network
Radio
Network
PNC Server
IP Network
Base station
POCSAG
Wire
Radio
Satellite
Description
Applies to s.QUAD, DE915, DE935, HURRICANE DUO,
IDR 200 / 250 / 300, DE920Ex
22 Product Catalog 2015
Terminals
Pager
First responder
Art. No.
0991960
Digital Pagers
Message Text Enhancement
Talking with you / our customers, we have heard the following concern:
My Message text contains things that distract me, couldn’t you possibly suppress them?
Examples of such unwanted and to the end user distracting text items might be:
•• Incident Numbers
•• Timestamps
•• Error Codes
•• GPS Positions
The data above is there for a reason: Incident Number is useful for later reference, Timestamp may
be sent out to receiver without timestamp functionality and GPS Position data can be used to guide
vehicles to the incident. But many of the "average" users might be distracted by the elaborate data. To
alleviate this issue we built the "Replace Text Pattern" option.
The Replace Text Pattern option allows you to search for text inside the message text that conforms to
certain formatting rules: e.g. Timestamp: ##:## (meaning two digits followed by a : followed by two
digits). It is now possible to either suppress text that looks like this completely, or replace it with some
constant text (e.g. "TS" for timestamps). To only match timestamps at the beginning of the message the
search pattern would be <##:##. Messages get stored in the pager as they were sent, and messages
that where edited using this option are prepended with an "inverted asterisk". The original messages
may be read out of the pager using service software.
Efficient Fleet Management for Terminals
Swissphone Terminal Update Tool (shorthand TUT) offers a tool for efficient and convenient configuration
of terminal fleets, both small and large. Imagine you have 20 RES.Q pagers on stock. Before delivering
them to the end user you would like to:
•• Update the Firmware
•• Set Network-Parameters (such as reception Frequency and baud rate) in all terminals
•• Individualize the terminals with RIC’s, Profiles etc.
Typically you use Terminal Flasher, PSWplus and the document describing how to individualize each
device. Using Terminal Update Tool, the configuration process can be streamlined:
First, create a base configuration and select it in the user interface. Second, select the desired firmware
and list how to individualize each device. Then, you simply press "start" and all you have to do is plug
the terminals into the programmer and wait for the green arrow showing when TUT is ready for the next
terminal.
TUT is flexible, allowing you also to program only a base configuration or a new firmware. Additionally,
you can set up your TUT with multiple programming cradles. One to eight cradles can easily be handled
with a basic Laptop computer. This allows you to scale from small fleets managing tens of terminals to
fleets including hundreds or even thousands of terminals.
You can use normal Programming Set "PG Set Expert" as a programming cradle. The included USB to
RS232 adapter cable allows you to connect up to 4 cradles to most Laptops easily. When deciding how
many cradles you want, please keep in mind the following: if you use 8 cradles and do firmware update
plus configuration, on average about every 15 seconds a terminal will be finished!
Supported Terminals and for Message Text Enhancemet
•• s.QUAD
•• HURRICANE DUO
•• DE915
•• DE935
Description
CD Software Terminal Update Tool
Art. No.
0991892
Product Catalog 2015 23
Accessoires
FFRS - Firefighter Response
System and s.ONE
•• Know who’s
responding in real time
•• Know who’s
available
•• Send Mass
notification
Know who’s available even beforde a dispatch
For some agencies, knowing who is available to
respond and who is not is valuable information. This
information can be used to get a rough idea on who
would call in as “responding” should an incident be
dispatched. It can also be used to know who would
be able to respond during high probability periods
when your agency could be dispatched, such as a
weather related event or on weekends.
alerting special teams, sending out reminders, or
polling agency personal about an upcoming function.
Dispach Center Access
The dispatch center module grants dispatch centers
an overview of all the fire departments under their
control. The module can be used to forward secondary notification messages via text message, email
and phone calls for redundancy. Members without
smartphones can receive a message with address
and call information via text message. Discounts are
available for region-wide implementations.
Mass Messaging
The eNotify module is a mass-notification system
that allows your agency to send out individual or
bulk messages to email, SMS text, and mobile,
home, or work phones. This feature is great for
Maps
Maps Option allows to show the current location on
the map in real time.
Reliable alerting for dispatching and efficient resource management over cellular
Command & Control
Network
Terminal
Emergency center
Working place
DiCal®
Pager
Resource Management
cellular
Smartphone (App)
911
24 Product Catalog 2015
FFRS - Firefighter Response System and s.ONE
Firefighter Response System
FFRS
Description
FFRS - One-Year Subscription
FFRS - Three-Year Subscription
FFRS - One-Year Subscription for departments, agencies and teams >100
FFRS - Inbound
FFRS - Outbound
FFRS - SMS
Art. No.
FFRS
FFRS3
FFRS100
Inbound
Outbound
SMS
s.ONE
Online platform for the targeted implementation
s.ONE is designed for quick,
targeted alerting
bar and those that are not available are displayed with a red bar.
The various functions of the new Swissphone
platform enable quick and targeted alerting. For
example, operations directors can view the availability of relief forces or that effective strength of
teams and groups on a smartphone or display
screen and then alert as necessary. The s.ONE
modules can be combined with one another in
any way, meaning it is possible to start with a
simple solution and use other modules to
expand it into a complete alerting solution.
The s.ONE monitor displays on the screen
how many of the summoned relief forces have
acknowledged the alert with “I’m coming” or
“I’m not coming” or are travelling to the scene of
the incident. The engaged relief forces are then
displayed with a green bar and those that are
not available are displayed with a red bar. If the
operations director plans a certain number of
relief forces for a large fire, he will be able to
view on the s.ONE platform if he has achieved
his target and how many fire brigade relief
forces, paramedics or members of traffic control
are ready for deployment. This way, he can
quickly and easily re-alert the right personnel
depending on need. The scene of the incident
is displayed on a geographic map.
s.ONE resources display how many relief
forces are available at that current time. The
operations director can call up the relevant list
on the screen or smartphone app. The available relief forces are then displayed with a green
Advantages:
•• Simple system due to the use of a standard PC with internet access
•• Intuitive display of confirmations in the event of an alert and availability for dispatch
•• Flexible use via PC, smartphone, tablet, text and information paging
•• Redundant return channel due to use of cellular data
Hardware:
Software:
Description
s.ONE monitor Base
s.ONE monitor Advanced
s.ONE resources Base
s.ONE resources Advanced
s.ONE-Platform-Account, activation of commercial account
(subscription usage fee not included)
Art. No.
on request
on request
on request
on request
Product Catalog 2015 25
Accessoires
Accessories
Overview of the various devices
Body Type: BT1
Body Type: BT2
Body Type: BT3
••
••
••
••
••
••
••
••
••
••
•• s.QUAD Voice
•• s.QUAD X15
•• s.QUAD X35
RE609
RE619
RE629 voice
RE629 memo
HURRICANE DUO
DE915
DE935
DE920Ex
RES.Q
SWISSPHONE TRIO
Standard Charger, Car Charger
(Car) Charger (BT1, BT2)
•• Constant current charging or trickle charging to maintain battery capacity
•• LED indication for both charging modes
•• ALG Standard: 12V / DC connector
Charger
Car charger
26 Product Catalog 2015
Unit
Standard US
Standard
AA-Cells*
●
●
Art. No.
0892661
0892523
Accessoires
Pro Charger, Audio Charger
(Car) Charger (BT1, BT2)
••
••
••
••
••
••
Constant current charging or trickle charging to maintain battery capacity
LED indication for both charging modes
LED call indication
BNC type antenna connection
5-pin socket for easy connection of external devices
ALGRA: 12 V / DC connector
Charger
Audio Cable
Car Charger
Unit
LGRA Expert VHF US
LGRA Expert VHF Audio US
Audio cable for charger
ALGRA Expert VHF
AA-Cells*
●
●
●
Art. No.
0892650
0892662
7092021
0892517
Charger s.QUAD
Quick Charger (BT3)
••
••
••
••
••
Constant current charging or trickle charging to maintain battery capacity
LED indication for both charging modes
LED call indication
BNC type antenna connection
6-PIN socket for easy connection of external devices
Charger
Unit
LG s.QUAD
AA-Cells*
Atrt. No.
0810942
AA-Cells*
●
●
Art. No.
0892653
0892506
Unit
AA-Cells*
●
MLG Expert LAN UNI
MLG library (DLL for MLiG / MLG Expert LAN UNI)
Art. No.
0892532
0892535
Multi Charger Expert
Multi Charger (no LAN) (BT1, BT2)
•• MLGM: Multi charger primary (1 pc)
•• MLGS: Multi charger secondary (up to 6 pcs for 1 master)
Multi charger
Unit
MLGM Expert US
MLGS Expert
Multi Charger LAN
Multi Chargers with LAN connection (BT1, BT2)
•• Multi Chargers
•• With Universal Power plug (UNI)
•• MLG for Pagers with AA-Cells / AAA-Cells
Multi charger
Product Catalog 2015 27
Accessoires
Programming Kit
Universal Programming Unit (BT1, BT2)
••
••
••
••
••
For all digital and analog devices
includes USB-converter cable
RS-232 serial interface
Programming software
Programming manual
Unit
Programming unit / -SW Programming Kit US
CD Programming Software
1)
AA-Cells*
●1)
Lithium Cells
●1)
Art. No.
0951516
0991885
not for charging
* Including AAA-Cells (ATEX-Pager)
Programming Kit s.QUAD
Universal Programming Unit (BT3)
••
••
••
••
For all s.QUAD devices
Connect over USB port
Programming software
Programming manual
Programming unit / -SW
1)
Unit
Programming Kit US
Art. No.
0810950
not for charging
Efficient Fleet Management for Terminals
Description
For more information see: “Digital Receivers”
Art. No.
Page 23
Chain, Lanyard
Chain
•• 36 cm
Lanyard
•• 36 cm
Chain
Lanyard
28 Product Catalog 2015
BT1
●
●
BT2
●
●
BT3
●
Art. No.
0321269
0321260
Accessoires
Clip, Holster
4 models
•• Black belt clip
•• Black belt clip with display protection (Swissphone logo)
•• Black belt clip with display protection (no logo)
•• Analog pager / HURRICANE DUO belt clip (incl. battery door)
Unit
Black belt clip
Black belt clip w. display protection
(Swissphone logo)
Black belt clip w. display protection
(no logo)
Black belt clip
Battery door without clip
Belt clip s.QUAD
Clip, holster
BT1
BT2
●
●
BT3
●
Art. No.
0539251
0539254
0539253
●
●
●
0539278
0301848
0285583
Antennas
2 models
•• 13 cm UHF antenna, fits the (A)LGRA Expert
•• 42 cm VHF antenna, fits the (A)LGRA Expert
Antenna
Art. No.
0226205
0226210
13 cm UHF
42 cm VHF
Leather Holster
2 models
•• For analog pagers and HURRICANE DUO
•• For digital pagers DE9xx
BT1
BT2
Leather holster
For analog pagers / HURRICANE DUO
For digital pagers
s.QUAD with Swissphone Logo
Holster Typ
BT1
BT2
BT3
Art. No.
0321285
0321315
0321319
BT1
●
Art. No.
0321871
0321316
Nylon Holster
2 models
•• For analog pagers and HURRICANE DUO
•• For digital pagers DE9xx
Nylon holster
For analog pagers / HURRICANE DUO
For digital pagers
BT2
●
Product Catalog 2015 29
DiCal - Network Architecture
30 Product Catalog 2015
Compact solutions for
small networks
Primary-Secondary solutions for
mid-sized radio networks
In the small network solution every page is transmitted
over one base station. This base station can provide an
adequate signal in the immediate vicinity of the transmitter
site to provide a reliable paging service. A page can be
triggered locally or remotely over a dispatch center and
transmitted to the base station.
The mid-sized network solution consists of a primary and
several secondary base stations combined into a group
network. Messages are transmitted over the central base
station to the paging network.
Secondary base stations receive the transmission over
the air and bit-synchronize re-transmissions to extend
coverage.
DiCal Network Architecture
Multi-Primary-Secondary solutions for
large radio networks
Simulcast solutions for
paging networks
The most efficient solution for large networks consists of
several base stations combined into a primary-secondary
group network. The messages are transmitted over a
central base station to the paging network. Base stations
in the transmission reception range save the messages
and then re-transmit them bit-synchronously to each other.
Thanks to multiple primary stations the page can be issued
simulcast to them. The page transmission can be reduced
substantially and the speed will increase.
The fastest but most expensive solution consists exclusively of primary base stations that are combined into one
simulcast network. Messages are transmitted simulcast
over all central stations to the paging network. Each base
station transmits simulcast in the first transmission. This
paging network configuration means that only one transmission is required for the entire coverage area. When
repetition is eliminated, transmission time is minimized.
One solution, different configuration
All network topologies can be configured by using the same base station. This affords users the greatest possible flexibility in
setting up, migrating, and operating their paging network infrastructure. The controlling, configuration, and monitoring
components PNC (Paging Network Controller) are responsible for the paging network. Base stations can be addressed and
configured via a TCP / IP connection or a proprietary radio protocol over the air.
Failsafe because of fallback scenarios
The radio network is designed for seamless transition from one operating mode to another. If, for instance, one or several
connections in a synchronous solution are disrupted or interrupted, the radio network switches to multi-primary-secondary
operating mode. The synchronous base stations that cannot be reached then run in the secondary operating mode until they
can be used again as synchronous base stations. If the entire TCP / IP communication breaks down, the PNC can access
an individual primary base station directly. The radio network then runs in primary-secondary operating mode. All the other
synchronous base stations that no longer have a connection then run in secondary mode, thus maintaining radio network
operation. Full functionality is preserved-only message throughput is reduced.
Alarm Input
Terminals
Access
Network
Paging
Network Controller
(Redundant)
Distribution
Network
POCSAG
Radio Network
Terminals
911
Emergency Center
PSAP
Alarm input
IP Network
Telephone
WAN / LAN
GSM / UMTS / LTE
Microwave link
PNC Server
IP Network
Wire
Radio
Satellite
Secondary
Base station
Pager
First responder
Secondary
Base station
Sirens
Emergency
management
Primary
Base station
Fallback
Radio / TV broadcasting
Public telephone
system
Product Catalog 2015 31
DiCal Network Architecture
DiCal-PNC III Server
The Paging Network Controller (PNC) consists of the following software modules:
•• Queue Manager (QM)
•• Dispatcher (D)
•• Paging Network Management System (PNMS)
•• Operation & Maintenance Center (OMC)
•• SQL Server Express Edition (database)
The Queue Manager receives the paging messages from the input systems through
TNPP or TMIP interface and batches them for the transmission. These transmission
batchesare queued and sent to the Dispatcher.
The Dispatcher receives the transmission batches from the Queue Manager and
sends them to the master base stations. The Dispatcher controls the distribution of
the messaging data and monitoring data to the base stations.
The Paging Network Management System features the tools for configuring and
monitoring of the base stations.
The Operation and Maintenance Center (OMC) polls all PNC software modules and
request their status along with error codes. The status values are displayed and
selected errors are forwarded as a page or an e-mail.
DiCal-IDEA™
Encryption Software
Paging Network Controller PNC III Server, consist of:
•• Industrial-PC according to FCC, 19" / 4HE
•• Digicom-Alerting Software Server-license
Description
DiCal-PNC III Server
32 Product Catalog 2015
Art. No.
6601
DiCal Network Architecture
DiCal-PNC III Red-Server
Paging Network Controller PNC III Redundant-Server.
Same as DiCal-PNC III Server with these additional features:
•• Digicom alerting software, redundancy license
Description
DiCal-PNC III Red-Server
Art. No.
6602
Options
Swissphone offers you the following Paging Network options:
DiCal-Alert III Client A
•• Industrial PC with DiCal alerting client license
DiCal-Alert III Client B
•• Minitower PC with DiCal alerting client license
DiCal-Altert III Client C
•• DiCal alerting client license
DiCal-TNPP Interface
•• TNPP Interface to the dispatch software or CAD
DiCal-CAD Interface
•• TMIP Interface to the CAD
DiCal Alert-Touch
•• Touch-PL 12,1" with actual system parameter
including Digicom-Touch alerting software
DiCal-Raid 1
•• Hard disk expansion (Raid 1) for PNC including Installation
Description
DiCal-Alert III Client
DiCal-TNPP Interface
DiCal-CAD Interface
DiCal Alert-Touch
DiCal-Raid 1
Art. No.
6603
6690
6630
660704
6608
Product Catalog 2015 33
DiCal Network Architecture
POCSAG Base Stations
The ITC2100 base station is a fundamental component in our wireless alerting system. This ITC2100 is a modern high
end radio base station for dispatch in synchronized POCSAG paging alert networks. The ITC2100 facilitates large
area synchronized alerting either across an entire network infrastructure or locally. The ITC2100 can be programmed
and implemented quickly using a web browser either on location or remotely. The Swissphone ITC2100 forms the
foundation for secure and reliable alerting.
DiCal-ITC2100 P-S
This base station is used in a paging network, where the ringnet concept or even a simulcast transmission applies.
It is a compact 19" rack, 5 ¼" high.
POCSAG Primary base station ITC 2100
•• Approved by the FCC / IC
•• Designed for high traffic (duty cycle 100%)
•• Transmission power 5-25W
•• Power supply 110VAC or 12VDC as backup
•• Easy configuration through web interface
•• Two rear antenna connections N-type 50Ω for Rx / Tx
•• Frequency range: 150.05-174 MHz or 421-430 MHz / 450-470 MHz
Description
DiCal-ITC2100 P-S (25W)
50W (VHF, 150.05-174 MHz, FCC-approved from August 2015)
40W (UHF, 450-512 MHz, FCC-approved from August 2015)
Art. No.
6841
0721621
0721623
DiCal-ITC2100 M-P
This base station is used in a paging network, where the ringnet concept or a simulcast transmission applies. It is a
compact 19" rack, 5 ¼" high.
POCSAG Multi-Primary base station ITC 2100 consists of:
•• DiCal-ITC2100 P-S
•• Multi-Primary Card with GPS-Antenna for external use
•• Multi-Primary Software
Description
DiCal-ITC2100 M-P
50W (VHF, 150.05-174 MHz, FCC-approved from August 2015)
40W (UHF, 450-512 MHz, FCC-approved from August 2015)
Art. No.
6842
0721622
0721624
Options
ITC2100 Housing *
•• Wall mounted, 7" high, IP54, including lock
I / O Card
•• 5x opto in
•• 7x relay out
Description
ITC2100 Housing
I / O card
* ITC2100 not included
34 Product Catalog 2015
Art. No.
238454
721706
DiCal Network Architecture
DiCal-ITC2100 High Power
This base station is used in a paging network, where the ringnet concept or a simulcast transmission applies. The
TB8100 high power module is a highly flexible base station / repeater, ideal for any application: a simple conventional
repeater, POCSAG paging transmitter, advanced TaitNet Quasi-Sync or MPT 1327 trunked system. It is suitable for
long range applications or difficult terrain. All components, Base Station Controller (3 HU) and external transmitter
unit (4 HU), are 19" rack compatible.
POCSAG high power base station ITC2100 features:
•• DiCal-ITC2100 M-P (except 25W module)
•• 255 channels
•• Built-in spectrum analyzer
•• Fast key-up time of 2ms
•• Power Save option (60mA), ideal for solar-based sites
•• Data / PTT
•• TaitNet Ethernet
•• IP management
•• Front-loading modules
Description
DiCal-ITC2100 Controller
100W Transmitter Unit VHF 136-174 MHz
100W Transmitter Unit UHF 400-520 MHz
Art. No.
721102
0723214
0723215
Services
Swissphone offers you the following Paging Network services:
•• DiCal Installation: Installation / Configuration (Data Mutation)
•• DiCal Configuration-I: Configuration and commissioning at Swissphone
•• DiCal System Training: DiCal training on-site
•• Site Survey: Software based radio coverage simulation
Description
DiCal Installation
DiCal Configuration-I
DiCal System Training
Site Survey
Art. No.
on request
on request
on request
on request
DiCal-Service Contract
•• Software maintenance (Adapted to current technical standards and elimination of reproducible errors.)
•• Development (Development of existing functions, adjustment of supplements in future operating
systems, integration of meaningful technological innovations and updates to the ITC firmware.)
Description
Service Contract
Art. No.
on request
Product Catalog 2015 35
Because of continued product improvement, we reserve the right to make changes without notice.
EN-US 04 / 2015 WEC
Swissphone, LLC
1194 West Ash Street, Suite C
Windsor, CO 80550
Tel.: (800) 596-1914
Fax: (970) 460-3014
[email protected]
www.swissphone.com