docIssue 7- 21st December 2014 Equipment
download 
Report Transcription
Issue 7- 21st December 2014 Equipment
Issue 7- 21st December 2014 Equipment Vibration Datasheet This datasheet is intended for use solely by Rail Hire UK Ltd’s Operations staff to plan the use of equipment that presents a HAVS risk. Third parties are responsible for risk assessing and managing their own activities and should not rely on the datasheet. Rail Hire UK Ltd accepts no responsibility for the accuracy of the data presented here when used by a third party. Information provided is based on manufacturer/supplier recommendations as at date of issue. Where a manufacturer/supplier gives more than one value for Vibration Emission the highest value given will be quoted. This datasheet, and the order in which the products appear, should not be considered as Rail Hire UK endorsing any of the products listed. A Red, Amber or Green (RAG) rating is given for vibration emissions and is based on the Health and Safety Executives published regulations and guidance. The limits used are: 5 m/s2 and above = Red 2.5 m/s2 to 5 m/s2 = Amber 2.5 m/s2 and below = Green Exposure points are given to facilitate in calculating the level of exposure received. The points for each vibration source can be added, subtracted, multiplied and divided as necessary to reach the desired trigger time. Points for different items of equipment can then be added to calculate the total level of exposure. Exposure Action Value (EAV) = 2.5 m/s2 A(8) = 100 points Exposure Limit Value (ELV) = 5 m/s2 A(8) = 400 points Further information on the use of Exposure Points can be found on the HSE website www.hse.gov.uk/vibration/hav/index.htm Equipment Vibration Datasheet Issue 7- 21st December 2014 Description Manufacturer Name/Model Vibration Emission (m/s2) Breaking/ Tamping Breaker Hilti TE 300-AVR 13.5 16 mins 66 mins 30 365 Breaking/ Tamping Breaker Hilti TE 80 7.5 53 mins 213 mins 9 113 Breaking/ Tamping Breaker Hilti TE 1000-AVR 6.5 71 mins 284 mins 7 85 Breaking/ Tamping Breaker Hilti TE 706-AVR 5.5 99 mins 397 mins 5 61 Breaking/ Tamping Breaker Hilti TE 905-AVR 8 47 mins 188 mins 11 128 Category Image (where available) Trigger Time to EAV Trigger Time to ELV Exposure Points by trigger time: 5 mins 1 hour Equipment Vibration Datasheet Issue 7- 21st December 2014 Description Manufacturer Name/Model Vibration Emission (m/s2) Breaking/ Tamping Breaker Bosch GSH27VC 8.5 42 mins 166 mins 12 145 Breaking/ Tamping Breaker Atlas Copco Cobra TT 4.5 148 mins 593 mins 3 41 Breaking/ Tamping Tamper Geismar VPS 4.14 175 mins 700 mins 3 34 Breaking/ Tamping Ballast Tamper Geismar VBZ 2.44 504 mins 2016 mins 1 12 Breaking/ Tamping Vertical Tamper Petrol Robel 62.05 5.7 92 mins 369 mins 5 65 Cutting Cordless Reciprocating Saw Hilti WSR 36-A 16 12 mins 47 mins 43 512 Category Image (where available) Trigger Time to EAV Trigger Time to ELV Exposure Points by trigger time: 5 mins 1 hour Equipment Vibration Datasheet Issue 7- 21st December 2014 Description Manufacturer Name/Model Vibration Emission (m/s2) Cutting Circular Saw Makita 5903R 3 333 mins 1333 mins 2 18 Cutting Automatic Rail Saw Cembre RDS-14P ROBOKATTA 0 - - 0 0 Cutting Rail Saw - 2 Stroke Petrol Geismar MTZ 350S 7.29 56 mins 226 mins 9 106 Cutting Rail Saw Husqvarna K1250 6.3 76 mins 302 mins 7 79 Cutting Rail Saw Husqvarna K1260 5 120 mins 480 mins 4 50 Cutting Disc Cutter Husqvarna K1260 4.1 178 mins 714 mins 3 34 Category Image (where available) Trigger Time to EAV Trigger Time to ELV Exposure Points by trigger time: 5 mins 1 hour Equipment Vibration Datasheet Issue 7- 21st December 2014 Description Manufacturer Name/Model Vibration Emission (m/s2) Cutting Disc Cutter Husqvarna K760 2.4 521 mins 2083 mins 1 12 Cutting Disc Cutter Partner K650 4.6 142 mins 567 mins 4 42 Cutting Disc Cutter Partner K750 4.7 136 mins 543 mins 4 44 Descaling Needle Gun Hilti TE 104 9 37 mins 148 mins 14 162 Descaling Needle Gun Hilti TE 106 7.9 48 mins 192 mins 10 125 Descaling Needle Gun Hilti TE 300 9.5 33 mins 133 mins 15 181 Category Image (where available) Trigger Time to EAV Trigger Time to ELV Exposure Points by trigger time: 5 mins 1 hour Equipment Vibration Datasheet Issue 7- 21st December 2014 Description Manufacturer Name/Model Vibration Emission (m/s2) Descaling Rail Scrubber Yardene ERCU 4.55 145 mins 580 mins 3 41 Descaling Rail Head Scrubber Geismar DER 674 7.14 59 mins 235 mins 8 102 Descaling Rail Head Scrubber Geismar DK3 6.5 71 mins 284 mins 7 85 Drilling Impact Drill 110 V Bosch GSB21-2RE 14.6 14 mins 56 mins 36 426 Drilling Cordless Rotary Hammer Hilti TE 6-A36-AVR 9 37 mins 148 mins 14 162 Drilling Cordless Rotary Hammer Hilti TE 7-A 11 25 mins 99 mins 20 242 Category Image (where available) Trigger Time to EAV Trigger Time to ELV Exposure Points by trigger time: 5 mins 1 hour Equipment Vibration Datasheet Issue 7- 21st December 2014 Description Manufacturer Name/Model Vibration Emission (m/s2) Drilling Rotary Hammer Hilti TE 16 9 37 mins 148 mins 14 162 Drilling Cordless Rotary Hammer Hilti TE 30-A36 11 25 mins 99 mins 20 242 Drilling Combihammer (Corded) Hilti TE 30-AVR 12 21 mins 83 mins 24 288 Drilling Combihammer (Corded) Hilti TE 40-AVR 10.7 26 mins 105 mins 19 229 Drilling Heavy Duty Hammer Drill Makita HR2811F-1 15 13 mins 53 mins 38 450 Drilling Rotary Hammer Makita BHR261 13.5 16 mins 66 mins 30 365 Category Image (where available) Trigger Time to EAV Trigger Time to ELV Exposure Points by trigger time: 5 mins 1 hour Equipment Vibration Datasheet Issue 7- 21st December 2014 Description Manufacturer Name/Model Vibration Emission (m/s2) Drilling Rail Drill Cembre LD-1P ECO 4.36 158 mins 631 mins 3 38 Drilling Rail Drill Cembre LD-41P 2.69 415 mins 1658 mins 1 14 Drilling Rail Drill (Electric) Cembre LD-2E-110 2.5 480 mins 1920 mins 1 13 Drilling Rail Drill Rotabroach Rhino 4 RD074 2.45 500 mins 1999 mins 1 12 Drilling Electrical Magnetic Drill Rotabroach Puma CM/300/1 3.36 266 mins 1063 mins 2 23 Drilling Electrical Magnetic Drill Rotabroach RD131 2.5 480 mins 1920 mins 1 13 Category Image (where available) Trigger Time to EAV Trigger Time to ELV Exposure Points by trigger time: 5 mins 1 hour Equipment Vibration Datasheet Issue 7- 21st December 2014 Category Image (where available) Vibration Emission (m/s2) Trigger Time to EAV Trigger Time to ELV Exposure Points by trigger time: 5 mins 1 hour Description Manufacturer Name/Model Drilling Wooden Sleeper Drill Cembre SD-9P2 SD-9P-ECO SD-9P2-ECO 5.78 90 mins 359 mins 6 67 Drilling Rail Mounted Sleeper Drill Geismar PTXL 8.94 38 mins 150 mins 13 160 Drilling Rail Mounted Sleeper Drill Geismar PT8 4.7 136 mins 543 mins 4 44 Driving Impact Wrench 110 V Bosch GDS30 4 188 mins 750 mins 3 32 Driving Cordless Impact Driver Bosch GDS 18V-Li 12 21 mins 83 mins 24 288 Driving Impact Wrench Cembre NR-11P 8.67 40 mins 160 mins 13 150 Equipment Vibration Datasheet Issue 7- 21st December 2014 Description Manufacturer Name/Model Vibration Emission (m/s2) Driving Impact Wrench Bance GT350GES 11.6 22 mins 89 mins 22 269 Driving Impact Wrench Bance GT350GE 19 8 mins 33 mins 60 722 Driving Impact Wrench Maxim Master 35 (with roll bar) 11.6 22 mins 89 mins 22 269 Driving Impact Wrench Maxim Master 35 (no roll bar) 13.1 17 mins 70 mins 29 343 Driving Impact Wrench Maxim Master 35 (Manufactured pre 2000) 19 8 mins 33 mins 60 722 Driving Coach and Fishplate Wrench Geismar TB2 4.2 170 mins 680 mins 3 35 Category Image (where available) Trigger Time to EAV Trigger Time to ELV Exposure Points by trigger time: 5 mins 1 hour Equipment Vibration Datasheet Issue 7- 21st December 2014 Description Manufacturer Name/Model Vibration Emission (m/s2) Driving Rail Mounted Coachscrewing Machine Geismar TC 3.65 225 mins 901 mins 2 27 Fastening Gas Actuated Direct Fastener Hilti GX 120-ME 4.04 184 mins 735 mins 3 33 Fastening Pandrol "Fast Clip" Machine with Braking System Cembre PCM-2P-FC BS 2.5 480 mins 1920 mins 1 13 Fastening Pandrol "E Clip" Machine with Braking System Cembre PCM-2P BS 3.7 219 mins 877 mins 2 27 Fastening Rusty Clip Remover Maxim F2111 10.47 27 mins 109 mins 18 219 Fastening Spike Puller Geismar AC1 3.91 196 mins 785 mins 3 31 Category Image (where available) Trigger Time to EAV Trigger Time to ELV Exposure Points by trigger time: 5 mins 1 hour Equipment Vibration Datasheet Issue 7- 21st December 2014 Description Manufacturer Name/Model Vibration Emission (m/s2) Fastening Clipper Geismar AP21 4.5 148 mins 593 mins 3 41 Fastening Clipper Geismar AP11 4.5 148 mins 593 mins 3 41 Fastening Clipper Geismar AP11S6 Lightweight Petrol 4.7 136 mins 543 mins 4 44 Fastening Clipper Robel 34.01 1.9 831 mins 3324 mins 1 7 Grinding Cordless Angle Grinder Hilti AG 125-A22 3.8 208 mins 831 mins 2 29 Grinding Cordless Angle Grinder Bosch GWS 18V-LI 6 83 mins 333 mins 6 72 Category Image (where available) Trigger Time to EAV Trigger Time to ELV Exposure Points by trigger time: 5 mins 1 hour Equipment Vibration Datasheet Issue 7- 21st December 2014 Description Manufacturer Name/Model Vibration Emission (m/s2) Grinding Angle Grinder - 4" Bosch GWS 10 125 5.5 99 mins 397 mins 5 61 Grinding Angle Grinder 110 V 5" Bosch GWS 11 125 5 120 mins 480 mins 4 50 Grinding Angle Grinder - 9" Bosch GWS 21 230 H 5.5 99 mins 397 mins 5 61 Grinding Angle Grinder 110 V 7" Bosch GWS 22 180 H 8.5 42 mins 166 mins 12 145 Grinding Angle Grinder 110 V 9" Bosch GWS 22 230 JH 7.5 53 mins 213 mins 9 113 Grinding Angle Grinder Makita GA9020 5.5 99 mins 397 mins 5 61 Category Image (where available) Trigger Time to EAV Trigger Time to ELV Exposure Points by trigger time: 5 mins 1 hour Equipment Vibration Datasheet Issue 7- 21st December 2014 Category Image (where available) Vibration Emission (m/s2) Trigger Time to EAV Trigger Time to ELV Exposure Points by trigger time: 5 mins 1 hour Description Manufacturer Name/Model Grinding Profile Grinder - Petrol Geismar MP12 without Anti Vibe Handle 8.79 39 mins 155 mins 13 155 Grinding Profile Grinder - Petrol Geismar MP12 with Anti Vibe Handle 5.2 111 mins 444 mins 5 54 Grinding Profile Grinder 110 V Geismar MP12 3.77 211 mins 844 mins 2 28 Grinding Web/Fish Grinder Geismar MS9 6 83 mins 333 mins 6 72 Grinding Grinder Geismar MLC 1.3 1775 mins 7101 mins 0 3 Grinding Turnouts Grinder (Frog Grinder) Geismar MC3 6.03 6 73 83 mins 330 mins Equipment Vibration Datasheet Issue 7- 21st December 2014 Description Manufacturer Name/Model Vibration Emission (m/s2) Grinding Angle Grinder Petrol Geismar PHG2 7.5 53 mins 213 mins 9 113 Grinding Profile Grinder Geismar MP23 5.23 110 mins 439 mins 5 55 Grinding Vertical Grinder Geismar MV3 7.12 59 mins 237 mins 8 101 Vegetation Control Strimmer Husqvarna 343R 3.6 231 mins 926 mins 2 26 Vegetation Control Strimmer Husqvarna 545RX 3.2 293 mins 1172 mins 2 20 Vegetation Control Hedge Trimmer Husqvarna 325HD60 6 83 mins 333 mins 6 72 Category Image (where available) Trigger Time to EAV Trigger Time to ELV Exposure Points by trigger time: 5 mins 1 hour Equipment Vibration Datasheet Issue 7- 21st December 2014 Description Manufacturer Name/Model Vibration Emission (m/s2) Vegetation Control Hedge Trimmer Husqvarna 226HD60S 1.8 926 mins 3704 mins 1 6 Vegetation Control Hedge Trimmer Jonsered HT 2122 9 37 mins 148 mins 14 162 Vegetation Control Chainsaw Husqvarna 365 Xtorq 5.4 103 mins 412 mins 5 58 Vegetation Control Chainsaw Husqvarna 545 3.7 219 mins 877 mins 2 27 Vegetation Control Chainsaw Jonsered 2165 5.7 92 mins 369 mins 5 65 Other Paddle Mixer Bosch GRW11E 3 333 mins 1333 mins 2 18 Category Image (where available) Trigger Time to EAV Trigger Time to ELV Exposure Points by trigger time: 5 mins 1 hour Equipment Vibration Datasheet Issue 7- 21st December 2014 Description Manufacturer Name/Model Vibration Emission (m/s2) Other Paddle Mixer Bosch GRW12E 4.5 148 mins 593 mins 3 41 Other Filing Sander Makita 9032 2.5 480 mins 1920 mins 1 13 Other Battery Bush Intallation Tool Cembre BTEPE2DET12/16 2.5 480 mins 1920 mins 1 13 Other Battery Nut Splitting Tool Cembre B-TD3241-T 2.5 480 mins 1920 mins 1 13 Category Image (where available) Trigger Time to EAV Trigger Time to ELV Exposure Points by trigger time: 5 mins 1 hour
