Project SS-1114 Drawings

Transcription

A/V System Specifications
Part 1: General
1.1 Scope:
A.
This specification outlines the installation of Audio and Video systems for the
University of Wisconsin – Eau Claire Schofield Hall Auditorium.
B.
The system shall include the follow items:
a. Hardware
b. Installation
c. Training of owner and representatives
d. Service and Operations Manuals and documentation
e. Coordination of AC service and conduit to equipment locations provided by the
Electrical Contractor for the project.
f. Coordination of Architect services for rigging points and equipment location
g. As-Built Drawings
h. Programming files shall be property of the University of Wisconsin – Eau Claire
(Crestron, Soundweb, etc)
1.2 Description of Services
A.
The AV Contractor shall provide all necessary equipment, materials, accessories, and
interconnects as specified in this document to provide a fully functioning audio and
video system. Any equipment or items required to complete the project even if not
specifically called for in this document are required as part of this contract. The AV
Contractor shall account for shipping fees in their bid response.
B.
The Electrical Contractor shall provide conduit, raceway, junction boxes and floor
boxes as shown on the drawings and as specified in this document. The Electrical
Contractor shall provide pull string in all conduit. Conduit runs ending at rack or
equipment locations shall be coordinated with the AV contractor for proper installation
and mating to equipment. This includes bushings on conduit ends and proper electrical
isolation.
C.
The Architect shall provide appropriately rated structural support for AV equipment
mated to the building structure. This includes the flown speaker arrays and monitors
that comprise the video wall array.
a. Each TV mount weighs 28 lbs. The PN-E521is 62 lbs. for a total weight per TV
location of 90lbs. For 25 monitors the wall needs to support 2250 lbs. of weight.
b. Weight of the speaker array is as follows:
i. Total Array weight: 265 lbs.
ii. Front rigging load: 175 lbs.
iii. Rear rigging load: 90 lbs.
c. The horizontal angle of the speaker array shall be 20º toward the centerline of the
room. Rigging point locations detailed on AV-107.
1.3 Quality of Workmanship
A.
The AV Contractor shall be an authorized dealer/provider of the equipment specified
herin.
B.
The AV Contractor shall have been in business and providing AV system installation
for a minimum of five years.
C.
The Crestron system programmer shall be certified by Crestron.
D.
E.
The AV Contractor shall have nationally certified installation technicians.
The AV Contractor shall provide references pertaining to similar sized projects on
request.
F.
The AV Contractor shall have a certified BSS Audio Soundweb London DSP
programmer on staff with three years experience. The DSP program shall be
submitted to the Design Consultant two weeks before final system commissioning.
G.
The AV Contractor shall comply with the NEC in relation to installation of
components and system wiring.
H.
The AV Contractor shall provide training on the systems. Training shall be hands on
by demonstration of system functions.
I.
All equipment and installation, including Audio/Video wiring shall be guaranteed for
12 months from final acceptance of completion.
J.
Substitutions
a. Request for substitution shall be submitted ten working days before the bid is due.
The request shall include the make and model, and a copy of the architects and
engineering specification of the equipment along with a copy of the system diagram
drawings showing the implementation of the alternate equipment. Failure to
provide a request for substitution is grounds for rejecting the bid.
b. Substitutions after submittals have been reviewed shall not be allowed unless the
product has been discontinued. Alternatives for discontinued product must be
reviewed by the Design Consultant as soon as a known replacement product is
available.
c. Alternate equipment must be equal or better in all performance characteristics.
d. Any additional cost due to alternate equipment shall reviewed and by Owner before
approval.
e. Any cost savings from alternate equipment shall be passed as a credit to the Owner.
1.4 Submittals and Documentation
A.
Shop Drawings (provide the following for approval):
a. Drawings rendered by the AV Contractor in Visio or AutoCAD. The functional
block diagram shall show all equipment and connections including control system
wiring.
b. Rack elevations shall be submitted
c. Speaker rigging and location shall be submitted.
B.
As Built drawings: Provide one three ring binder or expanding partitioned file folder
with the following categories clearly labeled. A CD with the following information as
PDF files neatly organized into a logical folder structure shall also be required.
a. Functional Block diagram reflecting final installed system (As Built)
b. Service and Operations Manuals provided by the manufacturer of equipment.
c. Statement of Warranty for equipment if not provided in the above manual
d. DSP program file saved to a CD.
e. Crestron program file saved to a CD
f. Operating instructions specifically written for the system called out in this
specification.
g. “Quick Reference” instruction sheet laminated to provide simple instruction for
room subsystems shall be provided at the request of the owner or Architect
Engineer
1.5 System Descriptions
1. Audio - The audio system shall comprise a Line Array speaker system driven by matched
brand amplifiers. A digital snake system shall provide audio to a digital console. Outputs
of the digital console shall provide analog and digital paths to the amplifiers through DSP.
The DSP shall allow operation in a fully manual mode and a “simple mode” that provides
unattended audio functionality for basic presentations.
a. The system shall consist of a 2-way passive loudspeaker and a passive low-end
extension driven and protected by a dedicated amplified controller.
The loudspeaker shall feature two 6.5-in drivers in a bass-reflex tuned enclosure for
the low section and a 1.5-in diaphragm compression driver coupled to a DOSC® for
the high section. The loudspeaker shall be rated at a nominal impedance of 8 ohms.
The low-end extension shall feature a single 12-in transducer in a tuned dual-chamber
bass-reflex enclosure. The loudspeaker shall be rated at a nominal impedance of 8
ohms. The usable system bandwidth shall be 80 Hz to 20 kHz (-10 dB). When
operating with the low-end extension, usable bandwidth shall be extended down to 50
Hz.
The V-Shape coplanar transducer configuration generates polar pattern coverage of
100° horizontally (-6 dB points) with symmetric pattern control across the projection
axis, with no conflicts over the entire frequency range. The system shall generate a 15°
vertical directivity in a single mode. In line source mode, the vertical directivity is
dependent upon the number of enclosures and inter-element angles. The system shall
be curved up to a maximum of 15° (0° to 15°) for each element without breaking the
inter-element acoustic coupling. The low-end extension generates an omni-directional
coverage pattern.
The loudspeaker maximum peak SPL, measured at 1m under free field conditions
using 10 dB crest factor pink noise, shall be 130 dB. The long term RMS handling
capacity shall be 120 W at nominal 8-Ohms impedance. The low-end extension
maximum peak SPL, measured at 1m under half space conditions using 10 dB crest
factor pink noise, shall be 129 dB. The long term RMS handling capacity shall be 310
W at nominal 8-Ohms impedance.
Enclosure cabinet construction shall be made from a unique composite material with
mechanical and acoustic properties very similar to Baltic birch plywood with the
added benefit of a high immunity to moisture. Dimensions shall be 520 mm (20.5 in)
width, 175 mm (6.9-in) height at the front, 103 mm (4.1 in) height at the rear and 358
mm (14.1 in) depth. The front of the enclosure shall be protected by a plastic grill
covered with acoustically-transparent fabric. Enclosure weight shall be 13 kg (28.6
lbs).
The low-end extension enclosure construction shall consist of Baltic birch plywood.
Dimensions shall be 520 mm (20.5 in) width, 353 mm (13.9 in) height at the front, 280
mm (11 in) height at the rear and 358 mm (14.1 in) depth. The front of the enclosure
shall be protected by a sandblast-coated steel grill covered with acousticallytransparent fabric. Low frequency extension weight shall be 19 kg (41.9 lbs).
The 3–point rigging system shall be fully integrated into the cabinet. This allows
flying up to 20 enclosures or stacking up to 10 enclosures. The rigging system shall
also allow pole-mounting or under-balcony rigging up to two enclosures using a Ubracket. Equivalent combinations including low-end extension shall also be flown,
stacked or rigged.
The amplified controller shall incorporate a 2-input x 4-output DSP architecture and
deliver an output power of 4 x 1000 watts/ 4 ohms, 99 preset memory locations, a user
interface, an Ethernet connection for remote control and monitoring and a built-in
connection panel for input signal and speaker output. The amplified controller shall
also include digital AES/EBU sound card.
The 32-bit floating point DSP shall operate at a sampling frequency of 96 kHz with
cascaded 24-bit A/D converters. DSP shall feature dual IIR/FIR filter topologies, an
adjustable input delay from 0 to 500 ms, a pre-calibrated EQ contour filter and thermal
and over-excursion sense drive protection. Total I/O system latency shall be set at 3.9
ms (3.5 ms with AES/EBU).
The amplified controller network protocol shall operate at a speed of 100 Mbits/s and
allow remote control and monitoring of up to 253 units in star, daisy chain or hybrid
topologies. The physical connection between computer and the amplified controller
network shall be via CAT5e U/FTP (or more) cables connected to the RJ45 Fast
Ethernet I/O sockets located on the rear panel.
The control software shall allow for monitoring component load, signal level and
network fault, and allow control of gain, mute, delay and system contour EQ.
The loudspeaker system shall be the L-ACOUSTICS KIVA. The low end extension
shall be the L-ACOUSTICS KILO. The Amplified Controller shall be the LACOUSTICS LA4. The digital sound card shall be the L-ACOUSTICS LA-AES3.
All L-Acoustics speakers shall be white.
Placement of the speaker system is detailed on drawing AV-107. Final placement, and
coverage angles are the responsibility of the AV Contractor to ensure coverage of the
balcony and main seating area. Provide +/-3dB at one octave band centered on
4000Hz. Throughout the seating area. Equalization to attain flat frequency response
within +/-2dB between 50 to 10,000Hz. Final System Tuning to be completed by a
representative of L-Acoustics and factored into the bid price.
The speaker system shall allow the sound engineer to run the system with or without
additional subwoofers (Aux Subs) with appropriate crossover and room tuning
applied. This preset shall be recalled through L-Acoustics amplifier software.
b. Amplifiers for Monitors shall be Crown XTi-6002. They shall be wired to audio
plates as specified in the AV drawings. Amplifiers shall provide bi-amp capability
utilizing Neutrik four pole speakon connectors. Harman Hi-Q net software shall be
used to configure the amplifiers for bi-amp settings based on monitors furnished by
owner.
c. The soundboard shall be a Yamaha M7CL-48ES console with the following
accessories: Three SB-168ES stage input boxes, MBM7CL meter bridge, PSL360
redundant power supply, MY8AD24CA input card, and MY16-CII CobraNet card.
The SB-168ES units shall be located in the stage rack location. The soundboard shall
be configured to control the monitor speakers through Aux sends, and provide the
additional capability of running subwoofer content on an Aux channel (to the “Aux
Subwoofer” amplifier and plates”).
d. The DSP processing shall be BSS Audio’s London Soundweb hardware. A BLU-320
shall reside in the Booth rack providing CobraNet input and analog I/O for the booth.
A BLU-160 shall provide central processing for the audio system. A BLU-120 shall
provide analog and digital outputs to amplifiers.
The DSP shall be programmed to provide the following capabilities:
i. Automix capabilities for four wireless mics and any mics labeled “Crestron
System” on the input plates (12 total). Audio from the video system shall be
included in the Automix section.
ii. The ability for the sound engineer to run the system with the Aux Sub signal
derived from the main Left and Right outputs of the soundboard or from an
Aux output. This preset shall be recalled through the Crestron control system.
iii. Provide a “Mix Output” that shall be distributed from either the Automix
section or from the manual section.
iv. Provide a separately processed output for Lobby Paging
v. Provide a separately processed output for a hearing assistance system furnished
by owner.
vi. Provide a separately processed output for a program feed for the Clear Com
system
e. Lobby audio shall be a Crown CDi 1000 amplifier driving six 24CT micro speakers
mounted in the ceiling of the first and second floor lobby (three each)
f. Source Devices
i. Nemark iDEC iPod dock located in the sound board rack
ii. Tascam CD-500B CD players (x2) located in the sound board rack
iii. Shure MX418SC mounted to the podium (podium furnished by owner)
g. Custom Cabling, Floor Boxes and plates
i. A custom Whirlwind snake shall have a W1 male connector on one end. The
other end shall be 8 female XLR connectors and 4 ¼” TRS connectors. It shall
be 12’ long
ii. An FSR FL-540P-6 with FL-540P-BLK-C cover shall be installed flush to the
stage as indicated in the AV drawings. The four gang opening shall be for AV
connections. The single gang and double gang openings shall be for power
(standard electrical and for lighting equipment).
iii. The stage left and stage right audio plates shall have a Whirlwind W1
connectors wired in parallel to XLRs on the plate designated by the label on
the plate (see Plate Proofs below).
iv. All RJ-45 connections in plates shall be Neutrik CAT6 shielded Ethercon
connectors. All cable mount Ethernet connections shall be Neutrik NE8MC6MO connectors with color coded boots to match engraving around plate
mounted connectors for easy identification.
v. All cable mount speaker connectors shall be Neutrick NLT4FX connectors.
h. Rack System and Power
i. The rack shall be a Middle Atlantic 44sp ERK-44-25 rack with a VFD-44
vented front door and an ERK-4FT-285CFM fan top.
ii. The AV contractor shall provide appropriate blank panels to fill the front of the
rack as indicated on the rack elevation drawings
iii. Power in the stage rack shall be controlled by a Middle Atlantic USC-6R
controller. Power status shall be controlled by the Crestron Control System.
iv. The Electrical Contractor shall provide seven 30A circuits to the rack location.
The EC shall terminate the 30A circuits in the rack to the Middle Atlantic
RLM30 switched outlets.
v. The EC shall provide two 20A circuits to the rack location. The EC shall
terminate the 20A circuits is a duplex receptacle for each.
vi. Two Middle Atlantic PDC-915R-6 power strips will be connected to the two
20A circuits.
vii. All plate locations and conduit needs are specified in the AV drawings and the
Riser Wiring Worksheet attached to this document.
i. Clear Com System
i. A Clear Com MS-702 main station shall be mounted in the booth rack location
and provide intercom to all video patch plates, and dedicated intercom plates as
specified in the AV drawings. A Program Audio feed from the DSP will be
connected to the MS-702. The intercom system will provide two channels
(A&B) for all intercom locations.
ii. A Clear Com HB-702 will be mounted in the Green Room.
iii. All intercom plates will have a DPDT switch wired to a three pin XLR
providing the user to chose intercom channel A or B.
iv. The intercom beltpacks shall be RS601, qty 6.
v. The intercom headsets shall be CC-95 single muff headset, qty 4 and CC260
dual muff headsets, qty 3.
j. Audio System Add/Alternate equipment
i. Option 1: Aux Subwoofer system shall included four L-Acoustic SB18i
subwoofers powered by an LA4 amplified controller with AES-EBU input
card. Bids shall include necessary wiring, labor, and setup required over and
above the base bid.
ii. Option 2: A Sennheiser wireless mic system with four EW335G3-B systems
with e835 handheld capsule, four SK300G3-B bodypack transmitters, four
MKE2-EWGold lav mics, four MMK965-1 BK handheld capsules, and the
G3DIRKIT4 antenna kit.
iii. Option 3: Six EAW Microwedge 12” monitor speakers with one EAW
UX8800 processor.
iv. Option 4: Whirlwind drop snakes terminated with a W1 connectors. Two 6
Ch. 25’ snakes, two 6 Ch. 50’ snakes, two 12 Ch. 25’ snakes, and two 12 Ch.
50’ snakes.
v. Option 5: Road case for Yamaha soundboard: A custom console case for a
Yamaha M7CL-48ES, with doghouse, double wide 3 space rack under console
with center storage. Nosecone (3 piece) case design. 3/8” Tour series, Blue
color, Colson 4x2 casters, and custom recesses for McLoone size labels. The
case shall be an R&R Cases R&R-UWEC-YA-M748-CUSTOM.
2. Video System – The video system shall be a matrix based system delivering multiple
sources to a 5x5 video wall composed of 52” LCD 1080p monitors mounted to the rear
wall of the stage area. Source include Computers, Blu-Ray players, cable TV tuner, iPod
dock with video, a dedicated PC, and a dedicated Mac Pro. The video system operator
will have a preview and program screen available in addition to a monitor for the
dedicated Mac Pro computer. The stage podium will include an input for a laptop. The
input will be VGA with audio and HDMI. The transmitter device will be located in the
podium.
a. Matrix – The Matrix will be configured as stated in the equipment list and as
defined in the AV drawings. The HD Content Transport System shall include
providing and integrating the following principal systems:
i. Audio/Video switching.
ii. Audio/Video distribution at native resolution without compression.
iii. Video interface equipment.
iv. Audio interface equipment.
v. HDMI signal transport.
vi. HDMI 1.3 support.
vii. Deep Color support.
viii. Resolution management.
ix. HDCP key handling/management.
x. Fast HDMI switching with keep alive HDCP link.
xi.
xii.
xiii.
xiv.
xv.
xvi.
xvii.
xviii.
xix.
xx.
xxi.
xxii.
xxiii.
Multi-Channel Surround Sound Audio.
Digital diagnostic tools.
HD Content Transmitter.
HD Content Receiver.
UTP/STP or Fiber Optic cabling.
HDCP 1.1 support.
Fast HDMI switching.
CEC support.
Uncompressed video and audio transport.
HDMI 1.3 with Deep Color.
7.1 channel HD lossless audio.
Video resolutions up to 1920x1200 or 1080p/60.
Advanced video detection on every video type, including resolution, frame
rate and color depth.
xxiv. IR and RS-232 control over local device(s) (when used with a control
system by same
xxv. manufacturer).
xxvi. Ethernet support.
xxvii. Signal transmission up to 450 feet via UTP/STP cable.
xxviii. Signal transmission up to 3000 feet via fiber.
xxix. Ethernet support.
xxx. Gigabit uplink.
xxxi. Integrated 10/100 managed Ethernet switch.
xxxii. Sixteen (16) field configurable input card slots.
xxxiii. Four (4) factory configurable output card slots.
xxxiv. Output card accommodates 4 signal outputs.
xxxv. Easy software setup tool.
xxxvi. Front panel LCD diagnostic screen.
xxxvii. HDCP key register detection.
xxxviii. HDMI Cable test tool.
xxxix. Automatic resolution management via EDID.
xl. HDCP digital rights key management.
xli. Fast HDMI switching with keep-alive HDCP link.
xlii. CEC signal management.
xliii. Intercept CEC data being sent from HDMI devices.
xliv. Send control information.
xlv. The matrix shall be a Crestron DM-MD16X16 or equivalent.
b. Video Displays
i. The video wall displays shall be 52” LCD TVs, commercial grade display.
1. 1920x1080 resolution
2. 500 cd/m2 brightness
3. 5000:1 contrast
4. Fanless architecture
5. 6ms response time
6. LAN port
7. Serial Port
8. Scheduling function
9. Daisy Chain capability with PN-ZB01 input board
10. Frame width adjustment
11. Internal Video Wall processing up to 5x5
12. Certified 24x7 operation
13. The monitor shall be a Sharp PN-E521
ii. Video Monitors Preview, Program, and Computer
1. 23” LED backlit TV monitor
2. 250 cd/m2 brightness
3. 1000:1 contrast
4. 2ms response time
5. DVI-D, HDMI input
6. The monitor shall be a Samsung BX2350, qty 3
c. TV mounts shall be a pull out mount designed specifically for video walls featuring
a 150lb load capacity and a pull out range of a minimum of 7”. The mount shall be
a Chief LVSMU pull out video wall mount, qty 25.
d. Source Devices
i. An iPod dock will provide video and audio to the matrix via a Crestron
CEN-IDOCV-B-S interface. The interface includes an ABAR-1 kit and
ABVR-1 kit.
ii. Blu-Ray Players
1. PAL/NTSC format
2. RS-232 control
3. X.v.color support
4. Network functions
5. 32 bit/192kHz audio DA converters
6. 3D playback
7. The Blu-Ray player shall be the Denon DBP-2012UDCIP, qty 2
iii. Cable/IP Tuner
1. ATSC/QAM/NTSC signal reception
2. H.264, MPEG-2, MPEG 4 IP stream decoding
3. HDMI 1.3a output
4. Closed Captioning
5. RS-232 control
6. LAN port
7. The Tuner shall be an Aurora Multimedia V-Tune Pro HD
iv. Mac Pro – Note: UW-EC will purchase directly from Apple. The AV
Contractor needs to provide a line item for the computer to establish the
correct budget allotment for the project. The budget allotment should be
listed as $2,750 for the computer and $35 for a mini display port to HDMI
adapter.
v. Mac Pro display software
1. Video playback of video clips sorted into clip bins instantly through
clicking on the video thumbnail in the interface
2. Transition controls adjustable in real time
3. Color adjustments available in real time
4. Tiling capabilities
5. Future expansion capabilities for grid mapping to multiple displays
(additional hardware needed)
6. Native to MAC OS
7. The video display software shall be ProVideoPlayer by Renewed
Vision.
e. Custom Cabling, Floor Boxes and Plates
i. Video Patch Plate
1. A video patch plate shall be located in the Booth rack and provide
patch points for all HD-SDI and CATV jacks located on the 12
different wall plates in the auditorium (see AV drawings)
2. The video patch plate shall have four BNC connections wired to the
campus head end video equipment as tie lines for HD-SDI video
3. The video patch plate will have a patch point to an HD-SDI input on
the matrix labeled “To Matrix”.
4. An HDMI output of the matrix shall be converted to an HD-SDI
signal with a Black Magic Designs mini converter. This HD-SDI
signal will feed the “From Matrix” jack on the video patch panel.
5. A campus video feed will be distributed with a Kramer 1x4 RF
distribution amplifier. The outputs of the DA will feed four F
connectors on the panel labeled “Campus TV”
6. A cable TV video feed will be distributed with a Kramer 1x4 RF
distribution amplifier. The outputs of the DA will feed four F
connectors on the panel labeled “Charter Cable”
ii. Wall Video Plates
1. The plate will have two HD-SDI jacks (BNC)
2. The plate will have two CATV jacks (F)
3. The plate will have an intercom jack with A/B switch (3 pin XLR)
4. The plate will have a “Mix” XLR male jack fed from a Kramer
audio distribution amp in the booth rack or Extron MDA-3A
distribution amp in the stage rack.
5. The plate will have a network connection via an Ethercon Cat6
shielded connector.
6. The HD-SDI jacks will be numbered consecutively across all panels
from 1 to 22.
7. The CATV jacks will be numbered consecutively across all panels
from 1 to 22.
iii. Rack Video Plate
1. The plate will have two HD-SDI jacks (BNC)
2. The plate will have two CATV jacks (F)
3. The plate will have an intercom jack with A/B switch (3 pin XLR)
4. The plate will have a “Mix” XLR male jack fed from a Kramer
audio distribution amp in the booth rack or Extron MDA-3A
distribution amp in the stage rack.
5. The plate will have a network connection via an Ethercon Cat6
shielded connector.
6. The HD-SDI jacks will be numbered 23 and 24.
7. The CATV jacks will be numbered 23 and 24.
8. The plate will be located in the stage right rack.
f. Rack and Power
i. The rack shall be a Middle Atlantic 44sp ERK-44-25 rack.
ii. The AV contractor shall provide appropriate blank panels to fill the front of
the rack as indicated on the rack elevation drawings.
iii. SurgeX SEQ: The SEQ shall be a two-rack-space unit in a magnetic
shielding steel enclosure. It shall operate from 120 volts AC and have a 9foot, grounded, 3-wire #12 line cord. There shall be 12 grounded AC
receptacles in three banks of four on the rear panel, each bank sequenced
from the previous bank by an adjustable 0 - 40 second delay, and two
receptacles always on. There shall be a back-lit LCD display that shows unit
status and AC line voltage, and two screwdriver adjustments to program the
unit. Overall dimensions shall be 3.5” H x 19” W x 10.5” D. Weight shall be
16 pounds.
The SEQ shall have a load rating of 20 amps at 120 volts, a self-test circuit
with visual indicator and provide EMI/RFI filtering, inrush current
elimination and catastrophic over/under-voltage shutdown. It shall meet
Federal Grade A, Class 1, Mode 1 guidelines for powerline surge
suppressors and withstand at least 1000 occurrences of surge pulse voltages
up to 6000 volts.
The SEQ will be controlled by the Crestron Control System
iv. One Middle Atlantic PDC-915R-6 power strip will be connected to a 20A
circuit will be controlled by the Crestron Control System.
g. Video Add/Alternates
i. Option 1: Sharp PN-E601 monitors will replace the PN-E521 monitors, qty
16. The input card will change to a PN-ZB02, qty 16. The mounts and
cables will change quantity from 25 to 16.
3. Network Equipment
a. Two HP V1920-24G switches will provide network connectivity for all AV
equipment and jacks located in the Auditorium. One will be located in the Booth
rack and one in the Stage rack.
b. A Linksys SD2005 five port switch will provide network connectivity in the sound
board rack.
4. Control System
a. A control system will be installed to offer a graphical user interface on two touch
panels that provides control of the audio, video and lighting systems.
i. The hardware shall consist of a central processor, a table top 9” touchpanel
for the booth and a 6” wireless touchpanel for the podium. The 6” panel
shall have a rack mounted dock for the stage rack and a table top dock for
the podium. The processor shall be a Crestron CP2E. The 9” panel shall be
a TPMC-9-B-T. The 6” panel shall be a TPS-6X-B-T.
ii. The AV Contractor shall bid an amount equal to 28 hours of programming
for the system to be used as a Service/Support Agreement to cover followup
programming changes after the initial installation is completed and signed
off by the Owner. The 28 hours of support shall not expire.
iii. The control functions for the Booth touch panel shall be as follows:
1. System On/Off
2. Route any video source to Preview Monitor
3. Route any video source to Program Monitors
4. Route any video source to SDI output (including matching program
output)
5. Recall lighting presets from the ETC Unison dimming system
6. Select the video routing based on podium position on the stage
(Stage Left, Stage Right, Stage Center, Front of Stage Center)
7. System Audio Mode (Simple System Mode, Manual Mix Mode)
8. Control of the Audio simple system
a. Individual mic levels and muting
b. Audio from video levels and muting
9. Control Blu-Ray player functions, both basic transports and
advanced menu function
10. Control Cable Tuner functions including presets for “favorite”
stations. This includes control of IP stream sources.
11. Control of iPod dock
12. Lockout of the stage Touchpanel (on/off)
13. DSP preset
a. Trigger preset routing main mix from soundboard to Aux
Subs.
b. Trigger Preset routing Aux output from soundboard to Aux
Subs.
14. Upstage Curtain Control, open/close
15. Downstage Curtain Control, open/close
iv. The control functions for the Stage touch panel shall be as follows:
1. System On/Off
2. Route any video source to Program Monitors
3. Recall lighting presets from the ETC Unison dimming system
4. Select the video routing based on podium position on the stage
(Stage Left, Stage Right, Stage Center, Front of Stage Center)
5. Control of the Audio simple system
a. Gooseneck Podium Mic and muting
b. Audio from video levels and muting
c. Single wireless mic level and muting
6. Control Blu-Ray player functions, both basic transports and
advanced menu function
7. Control Cable Tuner functions including presets for “favorite”
stations. This includes control of IP stream sources.
8. Control of iPod dock
9. Advanced User Screen (Password or Lockout protected)
a. System Audio Mode (Simple System Mode, Manual Mix
Mode)
b. Control of the Audio simple system
i. Individual mic levels and muting
ii. Audio from video levels and muting
c. Lockout of the Booth Touchpanel (on/off)
d. DSP preset
i. Trigger preset routing main mix from soundboard to
Aux Subs.
ii. Trigger Preset routing Aux output from soundboard
to Aux Subs.
e. Upstage Curtain Control, open/close
f. Downstage Curtain Control, open/close
Part 2 – Products
2.1 List of product
1. Audio
Main Audio System
L-Acoustics
L-Acoustics
L-Acoustics
L-Acoustics
L-Acoustics
L-Acoustics
Crown
Crown
JBL
Yamaha
Yamaha
Yamaha
Yamaha
Yamaha
BSS
BSS
BSS
BSS
Middle Atlantic
Middle Atlantic
Middle Atlantic
Middle Atlantic
Middle Atlantic
Middle Atlantic
Middle Atlantic
Numark
Middle Atlantic
Middle Atlantic
Middle Atlantic
Middle Atlantic
Shure
Extron
Kiva
Kilo
Kibu
LA4
LA-AES3
XTi6002
CDi1000
24CT Micro
M7CL48ES+3XSB168ES
MBM7CL
PSL360
MY8AD24CA
MY16-CII
BLU-160
BLU-320
BLU-120
Rack Mount Kit
ERK-44-25
VFD-44
ERK-4FT-285CFM
UD2
EB1
EB2
BR1
iDEC
USC-6R
RLM30-L530-1
RLM30-L520-1
PDC-915R-6
MX418SC
60-440-01
12
4
2
2
2
1
4
1
6
1
1
1
1
1
1
1
1
1
1
1
1
1
5
5
1
1
1
3
4
2
1
4
Line Array Speakers, three way, White
Subwoofers, White
Array Bracket White
Amplifier
AES-EBU input card
System Tuning by L-Acoustics
Amplifier for monitors
Amplifier
Ceiling speakers
Digital Console Package w/ Etersound, 3 Stage Boxes
Meter Bridge for M7CL
Redundant power supply for M7CL
Insert Card
Cobranet Card
BLU-160 16x0 (4 analog input)
BLU-320 12x4 (3 analog input, 1 analog output)
BLU-120 8x8 (2 analog output, 2 AES-EBU output)
Rack Kit for BLU-BOB
44 Space Rack 26" deep
Vented Front Door
Fan Top
2 space rack drawer
1 space blank panel
2 space blank panel
Brush Grommet Panel
iPod A/V Playbk/Rec 2RU Rackmt
Sequencing controller
30 Amp power module
20 Amp power module
Rack Mount Remote Trigger Power strip
18" Gooseneck Microphone
Audio Distribution Amps 1x3
Extron
Extron
Extron
Tascam
Linksys
HP
Furman
60-190-20
60-1022-01
60-190-01
CD-500B
SD2005
JE006A
M-8x2
1
1
1
2
1
1
1
Liberty
PC-G2900-E-P-W
2
2 Gang plate with large grommet, white
Liberty
Liberty
Liberty
Liberty
Liberty
FSR
FSR
1
1
1
1
2
1
1
Stage Left patch panel
Stage Right patch panel
Center Stage Floor Box Plate
Stage Face wall plate
FOH connection plate
Stage Box for raise floor
Black cover for FSR floor box
Whirlwind
Whirlwind
WestPenn
WestPenn
West Penn
LIBER-CQ77562-14
LIBER-CQ77562-15
LIBER-CQ77562-20
LIBER-CQ77562-21
LIBER-CQ77562-17
FL-540P-6
FL-540P-BLK-C
FM-8-4-TRS-W1IM-010SS
W1CF
227
224
4246
WestPenn
291
6
Mic/Line 22 GA cable 1000'
Neutrik
NLT4FX
30
Cable Mount NL4 connectors
Neutrik
NE8MC6-MO
10
Ethercon Cable connectors
Neutrik
BXX-2
2
Red Ethercon Boots
Neutrik
BXX-4
2
Yellow Ethercon Boots
Neutrik
BXX-5
2
Green Ethercon Boots
Neutrik
BXX-6
2
Blue Ethercon Boots
Neutrik
NC3MX
100
Male XLR
Neutrik
Contractor
Contractor
NF3FX
/VCABLE
/PINSTALL
25
1
1
Female XLR
Misc Install Hardware and cabling
Installation and programming
Clear Com
Clear Com
Clear Com
MS-702
HB702
1
1
Main station 2 ch.
headset station
Clear Com
Clear Com
Clear Com
Liberty
ProCo
RS601
CC95
CC260
LIBER-CQ77562-1
15-Mic-XX
6
4
3
3
6
intercom beltpack
dual muff headset
dual muff headset
Intercom plate, single XLR DPDT channel switch
15' mic cable
Contractor
/PINSTALL
1
Installation
Add Alternates
L-Acoustics
L-Acoustics
L-Acoustics
EAW
EAW
Sennheiser
Sennheiser
SB18i
LA4
AES-EBU
MW12Black
UX8800
EW335G3-B
SK300G3-B
4
1
1
6
1
4
4
18" Single Subwoofer install version white
Amplifier
AES-EBU input card
Monitor Speakers
Monitor System Processor
1
6
4
0.5
5
Rack Shelf for Audio DA
Power Supply for Extron DA
Rack Shelf for Power Supply
1RU CD Player, Balanced Outs, RS232, AES/EBU Out
5 port 10/100/1000 switch
V1910-24G switch 10/100/1000
Rack mount power strip
12' W1male to 8 FXLR and 4 TRS 1/4"
Female Multi-Pin Chasis Connector
12 GA speaker cable 1000'
18 GA speaker cable 1000'
CAT6 cable
Sennheiser Handheld system with e835 capsule
Bodypack transmitters
Sennheiser
Sennheiser
Sennheiser
Whirlwind
Whirlwind
Whirlwind
Whirlwind
R&R Case
MKE2-EWGold-beige
MMK965-1 BK
G3DIRKIT4
B-6-0-XL-M-W1IM-025
B-6-0-XL-M-W1IM-050
B-12-0-XL-M-W1IM-025
B-12-0-XL-M-W1IM-050
R&R-UWEC-YA-M748CUSTOM
4
4
1
2
2
2
2
Omni Lav
e965 condenser capsule
Antenna Kit
Mini 6 drop snake 25' to W1 male
1
Custom Road Case for Yamaha Console
2. Video Systems and Control
Video System
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Pro
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
HP
Crestron
Crestron
Crestron
Crestron
Crestron
Black Magic
Liberty
Crestron
Crestron
Crestron
Crestron
Samsung
Renewed Vision
Apple
Apple
Aurora
Marantz
DM-MD16X16
1
16x16 DigitalMedia™ Switcher
DMC-HD
DMC-DVI
DMC-VID-BNC
DMC-C
DMC-SDI
DMCO-5330
DM-TX-201-C
DM-RMC-200-C
CBL-HD-DVI-6
CBL-AUDIO-6
CBL-VGA-6
CBL-DVI-6
8785
CBL-HD-6
DM-CBL-8G-NP-SP500
DM-8G-CONN-100
CEN-IDOCV-B-S
ABAR-1 KIT
ABVR-1
CEN-SW-POE-5
CNRJ11
ST-IO
ST-RMK
JE006A
TPMC-9-B-T
TPS-6x-B-T
CEN-HPRFGW
TPS-6X-DSW
PW-2420RU
CONVMBHS
LIBER-CQ77562-16
CP2E
ST-COM
CNPWS-75
CNXRMAK
BX2350
PVPHD
MB570Z/A
3
1
1
5
1
1
2
1
1
5
4
4
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
1
2
HDMI® Input Card for DM Switchers
VTUNE PRO HD
DBP-2012UDCIP
DVI/RGB Input Card for DM Switchers
BNC Analog Video Input Card for DM Switchers
DigitalMedia 8G™ STP Input Card for DM™ Switchers
SDI Input Card for DM Switchers
2 DM 8G w/1 HDMI & 4 HDMI w/Audio
DigitalMedia 8G™ STP Transmitter 201
DigitalMedia 8G™ STP Receiver & Room Controller 200
HDMI™ to DVI Interface Cable, 6 ft
Mini-TRS Stereo Audio Interface Cable, 6 ft
Computer VGA Interface Cable, 6 ft
DVI Interface Cable, 6 ft
HDMI cable 15'
HDMI™ Interface Cable, 6 ft
DigitalMedia 8G™ Cable, non-plenum, 500 ft spool
DigitalMedia 8G™ Cable Connector, 100 Pack
Interface for Apple iPod
Adagio® Balanced Audio Receiver
Adagio® Balanced Video Receiver
5 port poe switch
Cresnet Interface
Relay Expansion box
Rack Mount Kit
V1910-24G switch 10/100/1000
9" Table Top Touchpanel
6" wireless touch panel with table stand
High Power Gateway
Wall Mount kit for TPS-6X
Power Supply
HDMI to SDI Converter
Rack Mount plate for TPS-6X wall kit
Compact Control System with Ethernet
Com port expansion module
75 Watt Cresnet Power Supply
Rack Mount Kit for C2N-HBLOCK and CNPWS-75
23" LCD Monitor
ProVideoPlayer (HD)
Mini DisplayPort to DVI Adapter to be purchased by owner
Apple Computer, to be purcahsed by owner direct from Apple
Cable TV HD Tuner
Blu-Ray player with RS-232 and PAL/NTSC
1 space blank panel
Brush Grommet Panel 1sp
Heavy Duty rackshelf (for MAC)
Middle Atlantic
Middle Atlantic
Middle Atlantic
Mid-Atlantic
Middle Atlantic
Middle Atlantic
SurgeX
EB1
BR1
VDS
U3
ERK-44-25
PDC-915R-6
SEQ
5
1
1
1
1
1
1
Video Wall
Sharp
Sharp
Chief
TrippLite
PN-E521
PN-ZB01
LSMVU
P560-006
25
25
25
24
52" Class Full Color Professional LCD Display Monitor
Optional Input/Output Expansion Board
FUSION Pull-Out Wall Mount (37-63" Displays)
DVI Dual Link Cable, 6'
TrippLite
P566-066
1
HDMI to DVI Cable, 6'
Liberty
LIBER-CQ77562-3 to
LIBER-CQ77562-13
11
Liberty
Liberty
Kramer
Extron
Kramer
LIBER-CQ77562-2
LIBER-CQ77562-22
104R
60-440-01
VM-1120
1
1
2
4
1
1
1
Video patch panel with 2 SDI, 2 F, Intercom, LAN *Check
Engraving*
Video patch panel with 2 SDI, 2 F, Intercom, LAN *Check
Engraving*
Rack mount patch panel for SDI and CATV
1x4 RF distribution amplifier
Audio Distribution Amps 1x3
1x20 or 2x10 distribution amplifier for video plates
RG6 Coax 1000'
BNC and F connectors (50 ea)
/PINSTALL
/LAVP
/BLOCK
/VCABLE
/INSTALLMAT
1
1
1
1
1
Installation
Programming for Crestron
Support Block for future Crestron programming
Misc install materials
Misc Rack Panels and Hardware
PN-E601
PN-ZB02
LSMVU
P560-006
16
16
16
15
60" Class Full Color Professional LCD Display Monitor
Optional Input/Output Expansion Board
FUSION Pull-Out Wall Mount (37-63" Displays)
DVI Dual Link Cable, 6'
P566-066
1
HDMI to DVI Cable, 6'
Rack Mount Shelf 3sp
44 Space Rack 26" deep
Rack Mount Remote Trigger Power strip
Rack Mount Surge Eliminator, 2sp
Video Patch Plates
Labor
CONTRACTOR
CONTRACTOR
CONTRACTOR
CONTRACTOR
CONTRACTOR
Video Wall Add
Alternate
Sharp
Sharp
Chief
TrippLite
TrippLite
2.2 Wire and Cable
A.
Microphone, Line Level, Control (RS-232) shall be West Penn 291 (25291 Plenum) or
equivalent.
B.
Speaker wire shall be West Penn 227 (25227 plenum)
C.
70.7 Volt distributed speaker system wire shall be West Penn 225 (25225 plenum)
D.
Control cabling (1 pair with shield + 1 pair) shall be Crestron Cresnet cable
E.
VGA HD15-HD15 and 5 conductor mini coax shall be Extron brand cable (MHR-5)
F.
Wireless microphone antenna cable shall be RG8U belden 9913, Shure RGX/U, or
equivalent
G.
Digital Media Twisted Pair Cable shall be Crestron DM-CBL-8G-NP (DM-CBL-8G-P)
H.
Video Cabling (HD-SDI, CATV) shall be RG6 West Penn 815 (25815 plenum)
Part 3 Execution:
3.1
General
A.
Loudspeaker systems shall be equalized using a pink noise source and SIA Smaart or
EASE RA. Other equipment or systems may be used with approval by UW-Eau Claire
B.
Sharp TVs will be calibrated for uniform color, brightness, and contrast. A document
showing settings of each TV will be presented to the Owner upon completion of the
project for reference of initial color matching settings.
C.
Loudspeaker, projector, and TV rigging or mounts shall have a 5 to 1 safety factor and
be installed per manufacturer’s directions.
D.
Mic/line, speaker, control or AC electrical wiring shall not share the same conduit.
E.
All cables shall be marked with permanent cable label, machine printed, with a number
scheme that matches “As Built” drawings.
F.
All cable routing within racks shall follow industry best practices for neatness,
bundling, service loops, and routing.
G.
All cabling shall be home run with no splices.
H.
Exposed cable bundles shall be encased in woven nylon sheath.
I.
Exposed shield wires shall be covered with heat shrink tubing. This includes rear side
of plate terminations and within field terminated connectors.
J.
All shields shall be terminated.
K.
Crestron Touch Panel/Button Panel designs shall be submitted for approval to the UWEau Claire for review to establish ease of use by the Owner.
L.
The AV Contractor shall notify UW-Eau Claire two weeks prior to final review that
system is complete and operational.
M.
The AV Consultant has the authority to represent the Owner in determining that best
practice procedures for installation of systems outlined herein have been followed.
Resolution of issues that bear expense shall be the responsibility of the AV Contractor.
Inputs
EW 335 G3
Wireless Mic
Inputs
Outputs
Input 1
Outputs
Ant A
XLR
3
AV000
Ant B
LAN
09 Switch
AV000
Antenna B
Antenna B1
AV000
AV000
LAN
3
10 Switch
AV000
Antenna A3
AV000
Antenna B3
AV000
Antenna A4
AV000
Antenna B4
Ant A
AV000
LAN
3
11 Switch
Speakon 2 (CH3+4)
Switch
13
5
Outputs
NL4
NL4
AV000
NL4
L-Acoustics Kilo Subwoofer
AV000
Inputs
LAN
AV000
NL4
Outputs
NL4
NL4
L-Acoustics Kiva
Inputs
FOH Plate Auditorium
LIBER-CQ77562-17
Front
1
AV000
2
AV000
AV000
NL4
W1
ES In
40 To SB3
Outputs
NL4
NL4
AV000
NL4
Back
W1
L-Acoustics Kiva
69 See Above
Inputs
ES In
Inputs
Outputs
Input 1
Outputs
1
AV000
2
AV000
ES Out
68 To SB1
CN/LAN
25 Switch
AV000
NL4
Outputs
NL4
NL4
L-Acoustics Kiva
Ant A
XLR
3
AV000
Ant B
LAN
12 Switch
Inputs
62
Blu-Link
To BLU-320
Omni In
1
2
CD-01U
4
Inputs
5
Left
Right
7
AV000
AV000
8
CD-01U
9
Inputs
10
Outputs
.
3
AV000
2
3
AV000
3
AV000
4
4
3
AV000
AV000
8
CN/LAN
5
5
3
AV000
AV000
8
ES In
6
6
3
AV000
AV000
8
ES Out
7
7
3
AV000
8
3
AV000
AV000
P
8
Slot 1 MY8AD24CA
1
AV000
P
2
3
AV000
P
4
13
AV000
P
5
14
AV000
P
6
AV000
P
7
AV000
P
8
12
Left
AV000
Right
AV000
Slot 3 MY16-CII
CN Primary
BLU-120
64
Outputs
8
AV000
ES In
8
AV000
70 See Above
AV000
NL4
L-Acoustics Kiva
26 Switch
Inputs
AV000
NL4
Network Switch
In Yamaha Road Case
8
1
AV000
8
2
AV000
8
3
NL4
AV000
NL4
L-Acoustics Kiva
Back
Inputs
AV000
NL4
Outputs
NL4
NL4
Wall Plate
Aux Subs
5
8
Outputs
NL4
.
AV000
NL4
67 From SB3
ES Out
CN/LAN
Outputs
NL4
4
Back
AV000
Front
AV000
NL4
NL4
AV000
NL4
NL4
2 Track AES-EBU
.
Blu-Link
ES In
AV000
ES Out
LAN
Inputs
16
L-Acoustics Kiva
W1
Front
8
AV000
NL4
Back
W1
CN Secondary
Numark iDEC
NL4
Inputs
3
P
15
Front
Outputs
NL4
FOH Plate Booth
LIBER-CQ77562-17
3
AV000
11
XLR
Omni Out
1
Outputs
.
6
Outputs
AV000
NL4
Outputs
2
3
MX418SC
Gooseneck Microphone
Inputs
05 Switch
LAN
AV000
Clear Com
Yamaha M7CL
Outputs
Analog
1
41 To SB3
3
AV000
Clear Com
BLU-160
Stage Rack
MDA-3A
Distribution Amp
EW 335 G3
Wireless Mic
.
Analog 1
AV000
NL4
AV000
AV000
Inputs
3
AV000
NL4
AV000
NL4
3
XLR
Ant B
AV000
Crestron Matrix Audio L
Crestron Matrix Audio R
ES Out
Outputs
Inputs
Inputs
Crestron Matrix Audio L
Crestron Matrix Audio R
CN/LAN
AV000
Speakon 1 (CH1+2).
39 To SB3
Outputs
Input 1
EW 335 G3
Wireless Mic
Inputs
AES-EBU 1&2
AES-EBU Loop
MDA-3A
Distribution Amp
AV000
Antenna B2
Inputs
Outputs
3
Analog 2
AV000
Inputs
Antenna A2
AV000
Inputs
AV000
3
XLR
Ant B
2
Left
AV000
Right
AV000
Mic Patch Plate Stage Left
LIBER-CQ77562-14
Inputs
Outputs
XLR
XLR
3
Mic Patch Plate Stage Left Rack
LIBER-CQ77562-14
XLR
XLR
AV000
LA4
XLR
Front
XLR
XLR
Input XLR
1
XLR
Mon A
Mon A
Mon B
Mon B
42 Mon Amp 1
43 Mon Amp 2
Mon C
Mon C
44 Mon Amp 3
Mon D
Mon D
45 Mon Amp 4
8G
8G
LAN
Inputs
Hardwired
1
XLR
XLR
XLR
XLR
XLR
XLR
XLR
Mon A
Mon A
42 Mon Amp 1
Mon B
Mon B
43 Mon Amp 2
Mon C
Mon C
44 Mon Amp 3
Mon D
Mon D
45 Mon Amp 4
8G
1
2
AV000
46 To Patch
2
3
AV000
47 To Patch
3
3
3
3
AV000
48 To Patch
4
4
AV000
3
4
4
3
AV000
49 To Patch
5
5
AV000
3
5
5
3
AV000
50 To Patch
6
AV000
3
6
6
3
AV000
51 To Patch
7
7
AV000
3
7
7
3
AV000
52 To Patch
8
8
AV000
3
8
8
3
AV000
53 To Patch
9
9
AV000
3
9
10
AV000
3
10
AV000
11
3
ES
LAN
From Blu-320
63
Inputs
Outputs
AES-EBU Card
(AES-EBU 1&2) 1
BLU-Link
12
12
AV000
3
12
13
13
AV000
3
13
14
AV000
3
15
AV000
3
15
16
16
AV000
3
16
17
17
From M7CL 68
ES
18
18
19
19
20
20
3
AES-EBU 1&2
Speakon 1 (CH1+2).
AV000
3
Analog 1
Speakon 2 (CH3+4)
Analog 2
AV000
NL4
AV000
NL4
AV000
NL4
Switch
37
LAN
Switch
3
14
Outputs
NL4
NL4
Inputs
LAN
AV000
NL4
4
AV000
NL4
AES-EBU Loop
Outputs
NL4
NL4
5
L-Acoustics Kiva
6
Inputs
7
AV000
NL4
8
Analog
9
65 To SB2
AV000
NL4
L-Acoustics Kiva
71
MDA 3V
(Clear Com)
AV000
NL4
LA4
Outputs
NL4
NL4
Mains Amp
13
Inputs
14
3
AES-EBU 1&2
Speakon 1 (CH1+2).
AV000
3
Analog 1
Speakon 2 (CH3+4)
16
Analog 2
64 To Blu-160
L-Acoustics Kiva
Outputs
AV000
15
BLU-Link
NL4
Inputs
11
12
Outputs
NL4
10
06 Switch
14
15
Inputs
Outputs
AV000
(AES-EBU 3&4) 2
11
AV000
NL4
AV000
NL4
Inputs
AV000
NL4
Outputs
NL4
NL4
AV000
NL4
AES-EBU Loop
Switch
15
L-Acoustics Kiva
LAN
Inputs
AV000
NL4
Outputs
1
LAN
Outputs
1
46 From SB1
2
2
47 From SB1
Outputs
NL4
NL4
3
3
48 From SB1
Mic Input Plate Center Floor Box
LIBER-CQ77562-20
Inputs
Outputs
AV000
NL4
4
4
49 From SB1
5
5
50 From SB1
AV000
3
2
2
3
AV000
55 To Patch
AV000
3
3
3
3
AV000
56 To Patch
AV000
3
4
4
3
AV000
57 To Patch
AV000
3
5
5
3
AV000
58 To Patch
AV000
3
6
6
3
AV000
59 To Patch
AV000
3
7
7
3
AV000
60 To Patch
Booth Plate 1
AV000
3
8
8
3
AV000
61 To Patch
Booth Plate 2 69
8G (Video)
AV000
3
9
ES
LAN
AV000
3
10
AV000
3
11
Outputs
XLR
XLR
XLR
6
Mon A
42 Mon Amp 1
Mon B
Mon B
43 Mon Amp 2
Mon C
Mon C
44 Mon Amp 3
Mon D
Mon D
45 Mon Amp 4
LAN
6
7
Mon A
7
8
8
W1 (parallel w/1-12)
51 From SB1
52 From SB1
53 From SB1
W1
W1
Mic Input Plate Stage Face
LIBER-CQ77562-21
Inputs
Inputs
AV000
XLR
8G (Video)
L-Acoustics Kiva
SB168-ES
Audio Snake 2 (SB2)
Inputs
Outputs
XLR
XLR
XLR
XLR
LAN
3
Mains Amp
8G
LAN
8G
1
AV000
14
XLR
3
Outputs
3
11
Outputs
AV000
3
Inputs
3
10
Mic Patch Plate Stage Right
LIBER-CQ77562-15
AV000
2
6
LAN
Inputs
Back
2
Blu-120
Stage Rack
SB168-ES
Audio Snake 1 (SB1)
8G
LAN
Mic Patch Plate Stage Right
LIBER-CQ77562-15
Front
Input XLR
21
22
3
1
1
3
AV000
54 To Patch
LAN
Inputs
66 To SB3
07 Switch
69
73 To Mix DA
BLU-Link
70
BOH Plate 3
70
6
12
3
13
7
AV000
3
14
8
AV000
3
15
AV000
3
16
10
65
ES
11
24
25
26
26
27
27
28
28
29
29
AV000
3
1
1
3
AV000
30
30
AV000
3
2
2
3
AV000
31
31
AV000
3
3
3
3
AV000
32
32
AV000
3
4
4
3
AV000
33
33
AV000
3
5
5
34
34
AV000
3
6
6
35
35
AV000
3
7
7
36
36
AV000
3
8
8
37
37
AV000
3
9
ES
38
38
AV000
3
10
39
39
AV000
3
11
40
Outputs
9
AV000
3
12
Xti 6002
54 From SB2
Wrls 1
38
AV000
3
13
Monitor Amp A BiAmp mode
Inputs
Outputs
10
10
55 From SB2
Wrls 2
39
AV000
3
14
11
11
56 From SB2
Wrls 3
40
AV000
3
15
12
12
57 From SB2
Wrls 4
41
AV000
3
16
Xti 6002
13
13
58 From SB2
66
ES
14
14
59 From SB2
Monitor Amp B BiAmp mode
Inputs
Outputs
15
15
60 From SB2
16
16
61 From SB2
63
Front
AV000
NL4
NL4
AV000
NL4
NL4
Listen Hearing Assistance
FBO
To Stage
Blu-120
Inputs
AV000
Outputs
XLR
3
..
REVISIONS
9
75
CDi1000
12
25
4
5
70
BOH Plate 2
From BLU-160
FOH Rack
Back
2
4
BOH Plate 1
NL4
Wall Plate
Aux Subs
Analog
1
72 To ClearCom
3
Outputs
NL4
Outputs
3
69
3
24
2
AV000
23
Analog
1
Booth Plate 3
22
AV000
NL4
BLU-320
Booth
23
40
Outputs
9
AV000
NL4
L-Acoustics Kiva
AV000
From SB1
Input XLR
21
NL4
Inputs
Video
Back
Outputs
NL4
Ceiling Speakers
Inputs
Outputs
-
AV000
+
24CT
Micro
Input 1
24CT
Micro
24CT
Micro
24CT
Micro
S
62
Switch
74
Switch
27
BLU-Link
#
DATE
DESCRIPTION
0
1/12/11
PRELIMINARY
CH 1.
24CT
Micro
24CT
Micro
CN Primary
CN Secondary
SB168-ES
Audio Snake 3 (SB3)
Inputs
From SB2
LAN
Outputs
LAN
67 To M7CL
08 Switch
AV000
AV000
3
3
Input 1
Input 1
Speakon 1 (CH1+2).
Speakon 1 (CH1+2).
AV000
NL4
AV000
NL4
42
43
To Stage Left, Stage
Right, and Center Stage
Monitor Jack #1
Monitor Jack #2
Xti 6002
Monitor Amp C BiAmp mode
Inputs
Outputs
AV000
3
Input 1
Speakon 1 (CH1+2).
AV000
NL4
44
Monitor Jack #3
45
Monitor Jack #4
DESIGNED BY:
-
DRAWN BY:
-
CHECKED BY:
-
FILE NAME:
-
SCALE:
NTS
Xti 6002
Monitor Amp D BiAmp mode
Inputs
Outputs
AV000
3
Input 1
Speakon 1 (CH1+2).
SHEET TITLE:
AV000
NL4
Audio System
W1 connectors wired
in parallel with input
XLRs from panel
SHEET NUMBER:
AV-101
Project #SS1114
AV000
AV000
LA4
Mains Amp
Eau Claire, WI
Antenna A1
Outputs
1
BLU-320 input 4
BLU-320 input 5
BLU-320 input 6
Schofield Hall A/V System
Antenna A
Outputs
Input 1
Ant A
38 To SB3
MDA-3A
Distribution Amp
EW 335 G3
Wireless Mic
Outputs
AV000
Back of House Plate
UW-Eau Claire
Inputs
2
AV000
Inputs
Inputs
AV000
3
AV000
ASA1
Antenna Combiner
1
Booth Plate
Destination
BLU-320 input 1
BLU-320 input 2
BLU-320 input 3
W1 Source
1 Omni Out 1 "Left Mains"
2 Omni Out 2 "Right Mains"
3 Omni Out 3 "Sub on Aux"
4
5
6
7
8
9 MY8AD input card 5
529 North Monroe Avenue
Green Bay, WI 54305
Phone: 920-435-5353 Fax: 920-435-6984
MDA-3A
Distribution Amp
DM-RMC-200-C
Video Receiver
Inputs
AV214
8
Sharp PN-E521
w/PN-ZB01 board
Outputs
Inputs
HDMI
HDMI
DM-8G STP
AV244
AV000
DVI
AV000
RS-232
9
DVI In
Sharp PN-E521
w/PN-ZB01 board
Outputs
Inputs
DVI loop out
RS-232
RS-232
DVI
AV000
DVI
9
AV000
9
Sharp PN-E521
w/PN-ZB01 board
Outputs
DVI In
DVI loop out
RS-232
RS-232
Inputs
DVI
AV000
DVI
9
AV000
9
Sharp PN-E521
w/PN-ZB01 board
Outputs
DVI In
Inputs
DVI loop out
RS-232
RS-232
DVI
AV000
DVI
9
AV000
9
Sharp PN-E521
w/PN-ZB01 board
Outputs
DVI In
DVI loop out
RS-232
RS-232
Inputs
DVI
AV000
DVI
9
AV000
9
DVI In
Outputs
DVI
DVI loop out
RS-232
9
RS-232
AV000
AV000
Relay 1
Relay 2
Inputs
Inputs
Outputs
8G STP
AV000
8G STP
LAN
LAN
8
AV201
DVI
AV000
9
DVI In
RS-232
Inputs
8
AV000
AV201
DVI
AV000
PC/Laptop
Lectern
Inputs
DVI
9
AV000
9
LAN
Outputs
DVI In
DVI loop out
RS-232
RS-232
Inputs
DVI
AV000
DVI
9
AV000
9
Sharp PN-E521
w/PN-ZB01 board
Outputs
DVI In
Inputs
DVI loop out
RS-232
RS-232
DVI
AV000
DVI
9
AV000
9
Sharp PN-E521
w/PN-ZB01 board
Outputs
DVI In
DVI loop out
RS-232
RS-232
Inputs
DVI
AV000
DVI
9
AV000
9
DVI In
Outputs
DVI
DVI loop out
RS-232
9
RS-232
AV000
AV000
9
DVI In
Sharp PN-E521
w/PN-ZB01 board
Outputs
Inputs
DVI loop out
RS-232
AV000
DVI
RS-232
AV000
9
Outputs
DVI In
DVI
DVI loop out
RS-232
9
Sharp PN-E521
w/PN-ZB01 board
RS-232
Inputs
DVI
9
AV000
AV000
DVI
9
Sharp PN-E521
w/PN-ZB01 board
Outputs
DVI In
Inputs
DVI loop out
RS-232
AV000
DVI
RS-232
AV000
9
DVI
9
Sharp PN-E521
w/PN-ZB01 board
Outputs
DVI In
DVI loop out
RS-232
RS-232
Inputs
DVI
9
AV000
AV000
DVI
9
DVI In
Outputs
DVI
DVI loop out
RS-232
9
RS-232
AV000
AV000
01 Switch
DM-TX-201-C
Transmitter
Outputs
Control
Inputs
VGA
M
HDMI
LAN
AV000
15
Audio
AV000
AV000
HDMI
8
AV000
AV000
AV000
AV000
15
HD-15 VGA
M
Audio
HDMI
AV000
8
Lectern Wall Plate
Center Floor Box
Outputs
8
8G RJ45
Inputs
AV000
Sharp PN-E521
w/PN-ZB01 board
Outputs
8G STP
8G STP
8
Inputs
AV201
AV000
HDMI
LAN
LAN
LAN
DVI
AV000
01 Switch
9
DVI In
Sharp PN-E521
w/PN-ZB01 board
Outputs
Inputs
DVI loop out
RS-232
RS-232
DVI
AV000
DVI
9
AV000
9
Sharp PN-E521
w/PN-ZB01 board
Outputs
DVI In
DVI loop out
RS-232
RS-232
Inputs
DVI
AV000
DVI
9
AV000
9
Sharp PN-E521
w/PN-ZB01 board
Outputs
DVI In
Inputs
DVI loop out
RS-232
RS-232
DVI
AV000
DVI
9
AV000
9
Sharp PN-E521
w/PN-ZB01 board
Outputs
DVI In
DVI loop out
RS-232
RS-232
Inputs
DVI
AV000
DVI
9
AV000
9
DVI In
Outputs
DVI loop out
RS-232
RS-232
DVI
9
AV000
AV000
Lectern Wall Plate
Stage Face Plate
TPS-6X wireless panel
Docking Station
Inputs
RS-232
AV000
Sharp PN-E521
w/PN-ZB01 board
8G STP
LAN
Inputs
DVI
Sharp PN-E521
w/PN-ZB01 board
01 Switch
Outputs
8G STP
Outputs
DVI loop out
Lectern Wall Plate
Stage Right
Inputs
Sharp PN-E521
w/PN-ZB01 board
Green Bay, WI 54305
Phone: 920-435-5353 Fax: 920-435-6984
Sharp PN-E521
w/PN-ZB01 board
Lectern Wall Plate
Stage Left
Inputs
Outputs
AV000
LAN
8
AV000
AV000
8
8
8G STP
Sharp PN-E521
w/PN-ZB01 board
Outputs
8G STP
LAN
LAN
8
Matrix
Crestron DM 16x16
AV201
Inputs
CEN-SW-POE-5
POE switch
01 Switch
Inputs
Inputs
AV000
Outputs
AV000
DMCO-23
Outputs
AV201
8
DMC-C
8G STP
AV201
8
POE
DVI
9
DVI In
Sharp PN-E521
w/PN-ZB01 board
Outputs
Inputs
DVI loop out
RS-232
RS-232
DVI
AV000
DVI
9
AV000
9
Sharp PN-E521
w/PN-ZB01 board
Outputs
DVI In
DVI loop out
RS-232
RS-232
Inputs
DVI
AV000
DVI
9
AV000
9
Sharp PN-E521
w/PN-ZB01 board
Outputs
DVI In
Inputs
DVI loop out
RS-232
RS-232
DVI
AV000
DVI
9
AV000
9
Sharp PN-E521
w/PN-ZB01 board
Outputs
DVI In
DVI loop out
RS-232
RS-232
Inputs
DVI
AV000
DVI
9
AV000
9
DVI In
RS-232
Outputs
DVI loop out
RS-232
DM 8G STP
.
8
AV242
3
8
AV242
4
8
AV242
5
8
AV242
8
DM 8G STP
AV214
Samsung BX2350
Preview Monitor
HDMI (same as 8G
above)
AV201
DMC-C
8G STP
8
Inputs
HDMI
HDMI
+
8
POE
Audio
AV000
HDMI
HDMI
Inputs
-
DM-TX-201-C
Transmitter
Inputs
Outputs
Inputs
HDMI
Outputs
AV201
DMC-C
8G STP
8
HDMI
+
AV000
15
VGA
AV000
15
HD-15 VGA
M
Audio
HDMI
HDMI
8G RJ45
8
Audio
AV000
AV000
AV000
HDMI
HDMI
75 To AV-101
G
8
AV000
AV000
AV000
AV000
AV201
Inputs
HDMI
HDMI
AV000
AV000
HDMI
HDMI
Outputs
AV000
HD-SDI
86
Inputs
AV000
8
DMC-C
8G STP
AV201
8
POE
AV201
8
DMC-C
8G STP
AV201
8
POE
Audio
Outputs
DVI
DVI
AV201
To Video
Patch
HDMI
Samsung BX2350
Preview Monitor
Inputs
POE
LAN
20 Switch
Mac Pro (FBO)
Booth
8
-
Audio
DVI loop out
UW-Eau Claire
DVI
DVI
LAN
AV000
DVI loop out
Blackmagic
HDMI-SDI converter
+
M
Audio
Outputs
AV203
-
.
DVI loop out
Samsung BX2350
Program Monitor
69 To AV-101
G
+
PC
Booth
Outputs
AV203
-
AV201
AV000
Outputs
.
DVI
DVI
AV000
Display Port
DP
AV000
M
Audio
LAN
8
AV000
DVI
DVI
AV000
AV000
AV000
AV000
22 Switch
DMC-DVI
DVI/RGB input
DVI
+
AV203
-
Audio
G
+
-
AV244
HDMI
HDMI
Blu-Ray Player
DBP-2012UDCIP
Inputs
FromCP2E 76
Switch 23
AV000
Control
9
AV000
8
Audio
Outputs
HDMI
HDMI
AV000
AV244
LAN
DMC-HD
HDMI
HDMI
YUV
Audio
Audio
AV212
DMC-HD
HDMI
HDMI
Audio
Blu-Ray Player
DBP-2012UDCIP
Inputs
FromCP2E 77
Switch 24
AV000
Control
9
AV000
Outputs
8
HDMI
HDMI
DMC-VID-BNC
RGB/YUV Analog
AV202
AV000
LAN
YUV
+
AV206
-
Audio
G
Audio
+
-
To Video
Patch
85
AV000
DMC-SDI
REVISIONS
Cable Tuner
Vtune Pro HD
Inputs
AV000
Patch Plate 79
AV000
Switch 25
AV000
Control
9
HDMI
HDMI
DESCRIPTION
0
1/12/11
PRELIMINARY
8
LAN
AV000
CATV
HP 24 port switch
10/100/1000 Stage
YUV
8
DATE
Outputs
AV214
CP-2E 78
#
LAN
Inputs
Outputs
Audio
To SL Lectern
CEN-IDOCV
iPod Dock
Inputs
AV214
8
LAN
ABVR-1
Audio receiver
Outputs
Inputs
CM Video Out
8
AV000
CM Audio Out
8
AV000
AV000
8
Outputs
Video Out
Video In
AV000
01
AV235
8
1
13
8
AV235
13 To Amp 1
To SR Lectern 02
AV235
8
2
14
8
AV242
14 To Amp 2
To SC Lectern 03
AV242
8
3
15
8
AV242
15 To Amp 3
To SF Lectern
04
AV242
8
4
16
8
AV242
To BLU-160
05
AV242
8
5
17
8
AV242
To SB1
06
AV242
8
6
18
8
AV242
To SB2
07
AV242
8
7
19
8
AV242
16 To J11
To SB3
08
AV242
8
8
20
8
AV242
17 To J12
To Wrls 1
09
AV242
8
9
21
8
AV242
18 To J30
CEN-HPRFGW
Stage
Inputs
USB
ABAR-1
Audio receiver
Inputs
AV000
8
Audio In
10
AV242
8
10
22
8
AV242
To Wrls 3
11
AV242
8
11
23
8
AV242
To Wrls 4
12
AV242
8
12
24
8
AV235
8
LAN
To BR 1
To BR 2
Audio Out Left
To CATV
76
77
78
AV236
AV237
AV237
8
Inputs
Booth PC
20
AV235
8
Booth MAC
21
AV235
8
Booth BR1
22
AV242
8
Booth BR2
23
AV242
8
Booth Tuner
24
AV242
8
To FOH Plate
25
AV242
8
To BOH Plate
26
AV242
8
To BLU-320
27
AV242
8
To BLU-320
74
AV242
8
To J14
28
AV242
8
To J15
29
AV242
8
AV242
8
AV000
AV000
4
Cresnet
RS-232
AV000
4
Cresnet
RS-232
+
+
-
Inputs
Outputs
-
AV000
80 To Lighting
Outputs
+
Cresnet
Relay 1
Cresnet
Relay 2
+
Panel
Relay 3
+
Cresnet
Relay 4
+
AV000
IR3
RS-232
IR4
RS-232
RS-232
+
4
-
AV000
96
Upstage Curtain “Up”
-
AV000
97
Upstage Curtain “Down”
-
AV000
98
Downstage Curtain “Up”
-
AV000
99
Downstage Curtain “Down”
IR4
Outputs
13
8
AV214
2
14
8
AV235
30 To J18
3
15
8
AV242
31 To J19
4
16
8
AV242
32 To J20
5
17
8
AV242
33 To J21
6
18
8
AV242
34 To J22
7
19
8
AV242
35 To J23
8
20
8
AV242
36 To J16
9
21
8
AV242
10
22
8
AV242
11
23
8
AV242
24
8
AV242
1
4
Outputs
ST-IO
LAN
+
HP 24 port switch
10/100/1000 Booth
Audio Out Right
Cresnet
Crestron RJ-50
Inputs
AV235
AV214
Inputs
Outputs
Control System
Crestron CP-2E
19 To J2
Outputs
AV000
Inputs
Cresnet
37 To BLU-120
Dock
To Wrls 2
ST-COM
CNRJ11
Outputs
TPS06X-IMCW
Interface
Inputs
AV235
8
LAN
TPMC-9-B-T
Booth
Outputs
Inputs
Crestron RJ-50
10
AV000
AV000
10
Crestron RJ-50
Outputs
DESIGNED BY:
-
DRAWN BY:
-
CHECKED BY:
-
FILE NAME:
-
SCALE:
NTS
SHEET TITLE:
12
Video System
TPS-6X-DSW Dock
Stage Rack
Inputs
Outputs
.
AV214
8
LAN
SHEET NUMBER:
AV-102
Project #SS1114
2
Eau Claire, WI
AV235
1
8
Video Wall Plates
LIBER-CQ77562-2 to -13
Clear Com
MS-702
Program Input
HD-SDI 1
HD-SDI 1
HD-SDI 2
Ch A
3
AV000
AV000
HD-SDI 2
Ch A
3
AV000
AV000
CATV 1
CATV 1
Ch A
3
AV000
AV000
CATV 2
CATV 2
Ch B
3
AV000
Switch In A
XLR Clearcom
AV000
HD-SDI 1
HD-SDI 1
Ch B
3
AV000
Switch In B
XLR Mix
AV000
HD-SDI 2
HD-SDI 2
Ch B
3
AV000
Switch Out
AV000
CATV 1
CATV 1
Clearcom XLR
AV000
CATV 2
CATV 2
Headend
Headend
PRGM Out
One Plate of shown for clarity.
Plates J4, J8, J30
Announce Out
Video Patch Plate
LIBER-CQ77562-22
Back
Mix
Switch
16
Lan
Clear Com Wall Plate
LIBER-CQ77562-1
Inputs
Outputs
Switch In A
XLR
Kramer
104R RF DA
Switch In B
Switch Out
Inputs
Outputs
XLR
Input
Clear Com
HB-702
Inputs
1
AV000
2
AV000
3
AV000
4
AV000
Outputs
To Headend
81
AV000
1
1
To Headend
82
AV000
2
2
To Headend
83
AV000
3
3
To Headend
84
AV000
4
4
To 8x8
85
AV000
To Matrix
From 8x8
86
AV000
From Matrix
AV000
To Tuner
To Tuner ANT
79
Campus CATV
Inputs
Inputs
From
73
BLU-320
AV000
3
Input
Outputs
1
1
3
AV000
2
2
3
AV000
AV000
2
2
AV000
3
3
AV000
4
4
AV000
Input 1
DESCRIPTION
0
1/12/11
PRELIMINARY
Charter Cable
AV000
1
1
AV000
2
2
AV000
3
3
AV000
4
4
1
AV000
2
AV000
3
AV000
REVISIONS
AV000
01 J14 Mix
3
3
AV000
01 J15 Mix
4
3
AV000
01 J18 Mix
5
3
AV000
01 J19 Mix
6
3
AV000
01 J20 Mix
7
3
AV000
01 J21 Mix
8
3
AV000
01 J22 Mix
9
3
AV000
01 J23 Mix
10
3
AV000
01 To Headend
11
3
AV000
01 To Headend
12
3
AV000
01 To Headend
13
3
AV000
01 To Headend
MDA 3A
Distribution Amp
From
71
BLU-120
DATE
Campus CATV
Outputs
4
Inputs
#
To Tuner
1
Charter Cable
Kramer
104R RF DA
From Matrix
1
.
Ch B
To Matrix
AV000
Ch A
Kramer VM-1120
Distribution Amp
Front
Project #SS1114
3
AV000
Eau Claire, WI
AV000
Outputs
Front
From
72
BLU-320
Back
UW-Eau Claire
Inputs
Green Bay, WI 54305
Phone: 920-435-5353 Fax: 920-435-6984
One Plate of 11 shown for clarity.
Plates J11 – J15, J18 – J23
Plate WQ216222 is stage rack
DESIGNED BY:
-
DRAWN BY:
-
CHECKED BY:
-
FILE NAME:
-
SCALE:
NTS
SHEET TITLE:
Outputs
1
AV000
01 J11 Mix
2
AV000
01 J12 Mix
3
AV000
01
Video System
CQ216222 mix
SHEET NUMBER:
AV-103
HP
V1910-24G
Power Strip
PDC-915R-6
Input
Extron MDA-3A x4
Output
Switched
1
Start Sequence Relay
2
Green Bay, WI 54305
Phone: 920-435-5353 Fax: 920-435-6984
Sennheiser
Antenna Dist + Power
Sennheiser
2 Ch wireless mic
Sennheiser
2 Ch wireless mic
Power
3
Extron MDA-3A + PS124
EB1
4
5
BSS
BLU-160
6
Unswitched
1
BSS
BLU-120
2
Charging Station (FBO)
Power Strip
PDC-915R-6
Input
Start Sequence Relay
120V 20A circuits
X2 (2 duplex)
Output
Switched
1
Touch Panel Dock
2
Power
3
4
5
6
To Power
Panel
Unswitched
1
2
LIBER-CQ77562-16
Middle Atlantic
RLM30-L520-1
Front
Rear
UD2 rack drawer
20Amp Power
Low Voltage Relay
20Amp Power
Crown
Middle Atlantic
RLM30-L520-1
Front
Rear
20Amp Power
Low Voltage Relay
XTi 6002
Crown
20Amp Power
Middle Atlantic
RLM30-L520-1
Front
20Amp Power
Low Voltage Relay
Middle Atlantic
USC-6R
Front
Sequence Start Relay
To Crestron
CP-2E
Rear
Front
Rear
20Amp Power
Low Voltage Relay
XTi 6002
20Amp Power
Sequence Relays
1
2
01
EB1
L-Acoustics
Power
3
Middle Atlantic
RLM30-L530-1
4
Front
5
6
Rear
30Amp Power
Low Voltage Relay
LA4
30Amp Power
EB1
L-Acoustics
Middle Atlantic
RLM30-L530-1
Front
Rear
30Amp Power
Low Voltage Relay
LA4
30Amp Power
Middle Atlantic
RLM30-L530-1
Front
120V 30A circuits
X3
To Power
Panel
Low Voltage Relay
30Amp Power
Rear
EB1
L-Acoustics
30Amp Power
LA4
EB1
Furman
PS8RII
Furman
PS8RII
Middle Atlantic
USC-6R
REVISIONS
#
DATE
DESCRIPTION
0
1/12/11
PRELIMINARY
Yamaha
EB2
Custom Plates
SB168-ES
Yamaha
SB168-ES
Yamaha
LIBER-CQ77562-14
EB2
SB168-ES
DESIGNED
BY:
DRAWN BY:CHECKED
BY:
FILE NAME: SCALE:
NTS
SHEET TITLE:
Stage Rack
Rear Elevation
Stage Rack
Front Elevation
Stage Power Plan
SHEET NUMBER:
AV-104
Project #SS1114
To Power
Panel
XTi 6002
Crown
Middle Atlantic
RLM30-L520-1
Eau Claire, WI
20Amp Power
UW-Eau Claire
120V 30A circuits
X4
Rear
XTi 6002
Crown
Green Bay, WI 54305
Phone: 920-435-5353 Fax: 920-435-6984
Crestron
CNPWS-75
Crestron
CP-2E
Crestron
DM-MD8x8
EB1
Listen
Hearing Assistance
Marantz
H MS
Middle Atlantic
PD-815RA-PL
DBP-2012UDCIP
Outlets
Marantz
Input Power
Power
1
2
H MS
3
DBP-2012UDCIP
4
5
EB1
6
120V 20A circuits
X2 (2 duplex)
7
Aurora Multimedia
Cable TV Tuner
Custom Plates
8
To Power
Panel
SurgeX SEQ
Power Sequencer
Power
Bank A
1
Outputs
Power
2
3
LIBER-CQ77562-22
Clear Com
MS-702
4
Bank B
1
2
3
2
3
UW-Eau Claire
4
Unswitched
1
2
U3
EB1
Middle Atlantic
PD-815RA-PL
SurgeX
SEQ
BR1
HP
V1910-24G
Apple
REVISIONS
Mac Pro
Crown
CDi1000
#
DATE
DESCRIPTION
0
1/12/11
PRELIMINARY
DESIGNED BY:
-
DRAWN BY:
-
CHECKED BY:
-
FILE NAME:
-
SCALE:
NTS
SHEET TITLE:
Booth Rack
Front Elevation
Booth Power Plan
SHEET NUMBER:
AV-105
Project #SS1114
EB1
BSS
BLU-320
Eau Claire, WI
4
Bank C (Unswitched)
1
Extron MDA-3A x4
Extron MDA-3A + PS124
Sennheiser
Antenna Dist + Power
Sennheiser
2 Ch wireless mic
Sennheiser
2 Ch wireless mic
Crestron
Green Bay, WI 54305
Phone: 920-435-5353 Fax: 920-435-6984
HP
V1910-24G
CNPWS-75
Crestron
CP-2E
Crestron
EB1
BSS
BLU-160
BSS
BLU-120
Charging Station (FBO)
DM-MD8x8
EB1
Listen
Hearing Assistance
Marantz
Touch Panel Dock
H MS
DBP-2012UDCIP
Marantz
LIBER-CQ77562-16
H MS
DBP-2012UDCIP
UD2 rack drawer
EB1
Crown
Aurora Multimedia
Cable TV Tuner
Custom Plates
EB1
BSS
BLU-320
XTi 6002
EB1
L-Acoustics
LA4
U3
EB1
EB1
L-Acoustics
Middle Atlantic
PD-815RA-PL
SurgeX
LA4
SEQ
EB1
L-Acoustics
BR1
HP
V1910-24G
Apple
LA4
REVISIONS
EB1
Middle Atlantic
PDC-915R-6
Middle Atlantic
PDC-915R-6
Middle Atlantic
USC-6R
EB2
Yamaha
#
DATE
DESCRIPTION
0
1/12/11
PRELIMINARY
EB2
Video Patch Plate
LIBER-CQ77562-2
EB2
Custom Plates
SB168-ES
Yamaha
Audio Patch Plate
LIBER-CQ77562-15
SB168-ES
Yamaha
LIBER-CQ77562-14
Mac Pro
Crown
EB2
EB2
CDi1000
SB168-ES
DESIGNED
BY:
DRAWN BY:CHECKED
BY:
FILE NAME: SCALE:
NTS
SHEET TITLE:
Stage Rack
Rear Elevation
Stage Rack
Front Elevation
Booth Rack
Front Elevation
Stage Right Rack
Rack Elevation
SWR-12-12
SHEET NUMBER:
AV-106
Project #SS1114
XTi 6002
Crown
Eau Claire, WI
LIBER-CQ77562-22
Clear Com
MS-702
UW-Eau Claire
XTi 6002
Crown
XTi 6002
Crown
Green Bay, WI 54305
Phone: 920-435-5353 Fax: 920-435-6984
3'-1"
10'-6"
J9
Rigging Points
20º angle from rear (toward
centerline of room)
To front rigging point
Flush to
Ceiling
2” x1
To J26
J8
18" AFF
¾” x1
To J26
18" AFF
1" x1
120V x1
To J26
18" AFF
1 x1
To J27
120V x1
J13
18" AFF
¾” x1
To J26
Spe
ake
r
J5
1/4"
2'-3"
J11
1'-5
Rack Power
Needs
7 30A circuits
2 20A circuits
Rack
18" AFF
¾” x1
J3
J16
See AV-110 for
Power outlet
Locations
5 20A circuits
Stage Face
¾” x1
To J26
120V x1
Duplex Power
Stage
1" x1
¾” x1
To J26
18" AFF”
1" x1
To J27
J7
J1
UW-Eau Claire
To J26
J14
18" AFF
1 x1
To J27
120V x1
PowerCon x4
J17
Green Room
42" AFF
¾” x1
To J26
Project #SS1114
18" AFF
2" x4
To Head End
Video & LAN
Eau Claire, WI
18" AFF
¾” x1
To J26
J26
J4
REVISIONS
DATE
DESCRIPTION
0
1/12/11
PRELIMINARY
J2
18" AFF
3'-1"
J6
r
ake
Spe
18" AFF
¾” x1
To J26
Rigging Points
20º angle from rear
(toward centerline of room)
To front rigging point
J10
Flush to
Ceiling
2” x1
To J26
18" AFF
1" x1
120V x1
To J26
10'-6"
18" AFF
1 x1
To J27
120V x1
J15
1/4"
1'-5
2'-3"
To J26
1" x1
1 ¼” x2
#
J30
1st Floor Lobby
Above Ticket
Counter
¾” x1
To J25
J12
DESIGNED BY:
-
DRAWN BY:
-
CHECKED BY:
-
FILE NAME:
-
SCALE:
NTS
SHEET TITLE:
Floor AV Box Locations
SHEET NUMBER:
AV-107
Green Bay, WI 54305
Phone: 920-435-5353 Fax: 920-435-6984
J19
18" AFF
1 x1
To J27
120V x1
18" AFF
1" x1
To J26
2" x3
To J26
In Catwalk
Most logical location for conduit runs
from video wall plates to J25 box
J24
18" AFF
1" x1
120V x1
To J25
J22
Project #SS1114
Rack Power
Needs
2 20A
Circuits
Eau Claire, WI
Rack
¾” x1
To 1st Floor Lobby
Ceiling Space
18" AFF
1" x1
To J25
J21
18" AFF
1 x1
To J27
120V x1
REVISIONS
18" AFF
1 x1
To J27
120V x1
#
DATE
DESCRIPTION
0
1/12/11
PRELIMINARY
J23
18" AFF
1 x1
To J27
120V x1
J25
18" AFF
1 x1
To J27
120V x1
J20
UW-Eau Claire
2" x3
To J25
J18
J27
¾” x1
To 2nd Floor Lobby
Ceiling Space
DESIGNED BY:
-
DRAWN BY:
-
CHECKED BY:
-
FILE NAME:
-
SCALE:
NTS
SHEET TITLE:
Balcony AV Locations
SHEET NUMBER:
AV-108
J10
2 Gang
Ceiling Left
Main Speakers
Green Bay, WI 54305
Phone: 920-435-5353 Fax: 920-435-6984
J9
2 Gang
Ceiling Left
Main Speakers
J26
24x24x6
Stage Left
Stage Rack location
J1
Four Gang
Stage Center
FSR Floor Box
J2
MA SWR-12-12
Stage Right
Wing
J3
1 Gang
Stage Rear Wall
Video Wall
J4
1 Gang
Stage Right
Clear Com
J5
1 Gang
House Left
Subwoofer
J6
1 Gang
House Right
Subwoofer
J7
4 Gang
Stage Face
Lectern Input
J8
1 Gang
Backstage Hall
Clear Com
J11
4 Gang
House Right
Video Patch
J12
4 Gang
House Left
Video Patch
J17
2 Gang
Green Room
Clear Com
Head End Video
Head End
Network
J27
Junction Box
Ceiling/Catwalk
REVISIONS
#
DATE
DESCRIPTION
0
1/12/11
PRELIMINARY
To 2nd floor lobby
ceiling space
J26
24x24x6
Booth
Booth Rack
J13
4 Gang
Back of House
Right Rear
Video Patch
J14
4 Gang
Back of House
Center
Video Patch
J15
4 Gang
Back of House
Left
Video Patch
J16
3 Gang
Back of House
Center
Audio Patch
J18
4 Gang
Balc Center
Video Patch
J19
4 Gang
Balc Rear Right
Video Patch
J20
4 Gang
Booth Right
Video Patch
J22
4 Gang
Booth Left
Video Patch
J23
4 Gang
Balc Rear Left
Video Patch
J30
1 Gang
2nd Fl Lobby
Clear Com
J21
4 Gang
Booth Center
Video Patch
DESIGNED BY:
-
DRAWN BY:
-
CHECKED BY:
-
FILE NAME:
-
SCALE:
NTS
Conduit Size
J24
3 Gang
Booth Center
Audio Patch
SHEET TITLE:
SHEET NUMBER:
To 1st floor lobby
ceiling space
Green Bay, WI 54305
Phone: 920-435-5353 Fax: 920-435-6984
19'-10"
20A Circ 3
Project #SS1114
UW-Eau Claire
12'-10 7/8"
20A Circ 2
Eau Claire, WI
20A Circ 1
7'-2 3/4"
20A Circ 4
REVISIONS
#
DATE
DESCRIPTION
0
1/12/11
PRELIMINARY
1'-6"
20A Circ 5
Power:
2 Gang
w/ 2 duplex
1 Gang
Video to Displays
DESIGNED BY:
-
DRAWN BY:
-
CHECKED BY:
-
FILE NAME:
-
SCALE:
NTS
SHEET TITLE:
Video Wall Elevation
SHEET NUMBER:
AV-110
Green Bay, WI 54305
Phone: 920-435-5353 Fax: 920-435-6984
Rack
Yamaha Sound Board
J21
J24
REVISIONS
#
DATE
DESCRIPTION
0
1/12/11
PRELIMINARY
DESIGNED BY:
-
DRAWN BY:
-
CHECKED BY:
-
FILE NAME:
-
SCALE:
NTS
SHEET TITLE:
Booth Elevation
SHEET NUMBER:
AV-111
Project #SS1114
Eau Claire, WI
UW-Eau Claire
2'-6"
3'-0"
3'-7"
Road Case
Project #SS1114
Green Bay, WI 54305
Phone: 920-435-5353 Fax: 920-435-6984
Eau Claire, WI
UW-Eau Claire
6'-8 7/8"
11'-11 9/16"
1'-6"
18'-11/16"
REVISIONS
2 Gang
4 outlets
#
DATE
DESCRIPTION
0
1/12/11
PRELIMINARY
1 Gang
Video to Displays
DESIGNED BY:
-
DRAWN BY:
-
CHECKED BY:
-
FILE NAME:
-
SCALE:
NTS
SHEET TITLE:
Video Wall Alternate
SHEET NUMBER:
AV-112
APPROVAL REQUIRED (sign below and return)
P.O. NUMBER:
Qty
P/N
Connector List:
Description
Material: 0.125 inch Aluminum
1
X4-N
NC3MDL-1-B 3 PIN MALE XLR
BLACK (GOLD) (SOLDER)
1
S43
DPDT LATCHING MINI ROCKER
SWITCH (2 POSITION)
Reference:
Company Name:
Part Number:
Panel Color:
Intercom AB
Liberty Wire & Cable - www.libertycable.com
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-1
Engraved Units:
10
To approve, sign top left corner and return with Purchase
Order. Changes to materials or layout may require
re-quoting and/or re-proofing.
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
1GANG
AStory
02-10-2011
NTS
1/1
Liberty Wire & Cable
Black Anodized
(characters & lines)
P.O. NUMBER:
Qty
P/N
Connector List:
Description
Material: 0.125 inch 6061T6 Aluminum
2
X4-N
1
R107
1
S43
RJ-45 CAT6 ETHERCON BLACK
D-SERIES PUNCHDOWN
SWITCH (2 POSITION)
2
F1
2
B2
F CONNECTOR BARREL
FEEDTHRU
BCJ-JR ISOLATED BNC FEEDTHRU
Reference:
Company Name:
Part Number:
Panel Color:
UW-EC Video Wall Plate Rack
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-2
Engraved Units:
44
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
1U-RACK
AStory
02-10-2011
NTS
1/1
Black Anodized
P.O. NUMBER:
Qty
P/N
Connector List:
Description
1
S43
SWITCH (2 POSITION)
2
X4-N
1
1
A28
R107
2
F1
2
B2
4CT47 BLACK 110 OUTLET
D-SERIES PUNCHDOWN
F CONNECTOR BARREL
FEEDTHRU
Reference:
Company Name:
Part Number:
Panel Color:
UW-EC Video Wall Plate
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-3
Engraved Units:
40
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
4GANG
AStory
02-10-2011
NTS
1/1
Black Anodized
P.O. NUMBER:
Qty
P/N
Connector List:
Description
1
S43
SWITCH (2 POSITION)
2
X4-N
1
1
A28
R107
2
F1
2
B2
D-SERIES PUNCHDOWN
F CONNECTOR BARREL
FEEDTHRU
Reference:
Company Name:
Part Number:
Panel Color:
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-4
Engraved Units:
40
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
4GANG
AStory
02-10-2011
NTS
1/1
Black Anodized
P.O. NUMBER:
Qty
P/N
Connector List:
Description
1
S43
SWITCH (2 POSITION)
2
X4-N
1
1
A28
R107
2
F1
2
B2
D-SERIES PUNCHDOWN
F CONNECTOR BARREL
FEEDTHRU
Reference:
Company Name:
Part Number:
Panel Color:
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-5
Engraved Units:
40
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
4GANG
AStory
02-10-2011
NTS
1/1
Black Anodized
P.O. NUMBER:
Qty
P/N
Connector List:
Description
1
S43
SWITCH (2 POSITION)
2
X4-N
1
1
A28
R107
2
F1
2
B2
D-SERIES PUNCHDOWN
F CONNECTOR BARREL
FEEDTHRU
Reference:
Company Name:
Part Number:
Panel Color:
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-6
Engraved Units:
40
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
4GANG
AStory
02-10-2011
NTS
1/1
Black Anodized
P.O. NUMBER:
Qty
P/N
Connector List:
Description
1
S43
SWITCH (2 POSITION)
2
X4-N
1
1
A28
R107
2
F1
2
B2
D-SERIES PUNCHDOWN
F CONNECTOR BARREL
FEEDTHRU
Reference:
Company Name:
Part Number:
Panel Color:
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-7
Engraved Units:
42
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
4GANG
AStory
02-10-2011
NTS
1/1
Black Anodized
P.O. NUMBER:
Qty
P/N
Connector List:
Description
1
S43
SWITCH (2 POSITION)
2
X4-N
1
1
A28
R107
2
F1
2
B2
D-SERIES PUNCHDOWN
F CONNECTOR BARREL
FEEDTHRU
Reference:
Company Name:
Part Number:
Panel Color:
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-8
Engraved Units:
44
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
4GANG
AStory
02-10-2011
NTS
1/1
Black Anodized
P.O. NUMBER:
Qty
P/N
Connector List:
Description
1
S43
SWITCH (2 POSITION)
2
X4-N
1
1
A28
R107
2
F1
2
B2
D-SERIES PUNCHDOWN
F CONNECTOR BARREL
FEEDTHRU
Reference:
Company Name:
Part Number:
Panel Color:
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-9
Engraved Units:
44
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
4GANG
AStory
02-10-2011
NTS
1/1
Black Anodized
P.O. NUMBER:
Qty
P/N
Connector List:
Description
1
S43
SWITCH (2 POSITION)
2
X4-N
1
1
A28
R107
2
F1
2
B2
D-SERIES PUNCHDOWN
F CONNECTOR BARREL
FEEDTHRU
Reference:
Company Name:
Part Number:
Panel Color:
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-10
Engraved Units:
44
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
4GANG
AStory
02-10-2011
NTS
1/1
Black Anodized
P.O. NUMBER:
Qty
P/N
Connector List:
Description
1
S43
SWITCH (2 POSITION)
2
X4-N
1
1
A28
R107
2
F1
2
B2
D-SERIES PUNCHDOWN
F CONNECTOR BARREL
FEEDTHRU
Reference:
Company Name:
Part Number:
Panel Color:
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-11
Engraved Units:
44
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
4GANG
AStory
02-10-2011
NTS
1/1
Black Anodized
P.O. NUMBER:
Qty
P/N
Connector List:
Description
1
S43
SWITCH (2 POSITION)
2
X4-N
1
1
A28
R107
2
F1
2
B2
D-SERIES PUNCHDOWN
F CONNECTOR BARREL
FEEDTHRU
Reference:
Company Name:
Part Number:
Panel Color:
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-12
Engraved Units:
44
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
4GANG
AStory
02-10-2011
NTS
1/1
Black Anodized
P.O. NUMBER:
Qty
P/N
Connector List:
Description
1
S43
SWITCH (2 POSITION)
2
X4-N
1
1
A28
R107
2
F1
2
B2
D-SERIES PUNCHDOWN
F CONNECTOR BARREL
FEEDTHRU
Reference:
Company Name:
Part Number:
Panel Color:
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-13
Engraved Units:
44
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
4GANG
AStory
02-10-2011
NTS
1/1
Black Anodized
P.O. NUMBER:
Qty
P/N
Connector List:
Description
1
A160YEL COLOR CODING LABEL FOR
D-SERIES CONNECTORS
(YELLOW)
2
R107
4
S3
24
X1-N
NC3FDL-1-B 3 PIN FEMALE XLR
8
X4-N
2
H-W1
HOLE ONLY FOR WHIRLWIND W1
MULTIPIN CONNECTOR (NO
CONNECTOR)
D-SERIES PUNCHDOWN
NL4MP 4 POLE SPEAKON BLACK
(SOLDER)
Reference:
Company Name:
Part Number:
Panel Color:
UW-EC patch plate V2 Left
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-14
Engraved Units:
238
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
5U-RACK
AStory
02-10-2011
NTS
1/1
Black Anodized
P.O. NUMBER:
Qty
P/N
Connector List:
Description
1
D-SERIES CONNECTORS
(YELLOW)
2
R107
4
S3
24
X1-N
8
X4-N
2
H-W1
CONNECTOR)
D-SERIES PUNCHDOWN
(SOLDER)
Reference:
Company Name:
Part Number:
Panel Color:
UW-EC patch plate V2 Left
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-15
Engraved Units:
255
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
5U-RACK
AStory
02-10-2011
NTS
1/1
Black Anodized
P.O. NUMBER:
Qty
P/N
Connector List:
Description
1
RECT
RECTANGULAR CUTOUT(s)
4
H2
Hole Only (.121 - .375)
Reference:
Company Name:
Part Number:
Panel Color:
Crestron TPS-6x
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-16
Engraved Units:
0
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
5U-RACK
AStory
02-10-2011
NTS
1/1
Black Anodized
P.O. NUMBER:
Qty
P/N
Connector List:
Description
1
A160GRN COLOR CODING LABEL FOR
D-SERIES CONNECTORS (GREEN)
1
A160BLU COLOR CODING LABEL FOR
D-SERIES CONNECTORS (BLUE)
1
A160RED COLOR CODING LABEL FOR
D-SERIES CONNECTORS (RED)
1
S43
SWITCH (2 POSITION)
1
X4-N
3
R107
1
H-W1
D-SERIES PUNCHDOWN
CONNECTOR)
Reference:
Company Name:
Part Number:
Panel Color:
UW-EC Back of House Plate
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-17
Engraved Units:
57
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
4GANG
AStory
02-10-2011
NTS
1/1
Black Anodized
P.O. NUMBER:
Qty
P/N
Connector List:
Description
2
R107
1
D-SERIES PUNCHDOWN
D-SERIES CONNECTORS
(YELLOW)
4
S3
(SOLDER)
2
X1-N
Reference:
Company Name:
Part Number:
Panel Color:
UW-EC Floor Pocket
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-20
Engraved Units:
79
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
Black
4GANG
AStory
02-10-2011
NTS
1/1
Clear Anodized
P.O. NUMBER:
Qty
P/N
Connector List:
Description
1
D-SERIES CONNECTORS
(YELLOW)
2
R107
1
2
A28
X1-N
D-SERIES PUNCHDOWN
Reference:
Company Name:
Part Number:
Panel Color:
UW-EC stage face
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-21
Engraved Units:
57
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
WHITE
4GANG
AStory
02-10-2011
NTS
1/1
BLACK ANODIZED
P.O. NUMBER:
Qty
P/N
Connector List:
Description
30
33
B2
F1
F CONNECTOR BARREL
FEEDTHRU
Reference:
Company Name:
Part Number:
Panel Color:
UW-EC Video Patch
Contact: - phn:800-530-8998 - fax:719-260-0075
LIBER-CQ77562-22
Engraved Units:
351
Text Color:
Panel Size:
Designed by
Date
Scale
Sheet
White
3U-RACK
AStory
02-10-2011
NTS
1/1
Black Anodized
UW-EC Schofiled Hall Conduit Capacity Chart
Box #
1
1
1
1
2
2
2
2
2
2
2
3
4
5
6
7
7
7
8
9
10
11
11
11
12
12
12
13
13
13
14
14
Size
4G
4G
4G
4G
SWR-12-12
SWR-12-12
SWR-12-12
SWR-12-12
SWR-12-12
SWR-12-12
SWR-12-12
1G
1G
1G
1G
4G
4G
4G
1G
2G
2G
4G
4G
4G
4G
4G
4G
4G
4G
4G
4G
4G
Function
FSR Floor Box
FSR Floor Box
FSR Floor Box
FSR Floor Box
SR Wall Box
SR Wall Box
SR Wall Box
SR Wall Box
SR Wall Box
SR Wall Box
SR Wall Box
Video Wall
SR Clear Com
Aux Sub Left
Aux Sub Right
Stage Face
Stage Face
Stage Face
Back Stage Hall
Main Array
Main Array
HR video patch
HR video patch
HR video patch
HL Video Patch
HL Video Patch
HL Video Patch
BOHR Video Patch
BOHR Video Patch
BOHR Video Patch
BOHC Video Patch
BOHC Video Patch
Wire Type
8G Vid
CAT6
Mic
Speaker
8G Vid
CAT6
Clear Com
Video
Line
Mic
Speaker
8G Vid
Clear Com
Speaker
Speaker
8G Vid
CAT6
Mic
Clear Com
Speaker
Speaker
CAT6
Clear Com
Video
CAT6
Clear Com
Video
CAT6
Clear Com
Video
CAT6
Clear Com
Part # OD
8G
4246
291
227
8G
4246
291
841
291
291
227
8G
291
227
227
8G
4246
291
291
227
227
4246
291
841
4246
291
841
4246
291
841
4246
291
0.244
0.225
0.127
0.26
0.244
0.225
0.127
0.245
0.127
0.127
0.26
0.244
0.127
0.26
0.26
0.244
0.225
0.127
0.127
0.26
0.26
0.225
0.127
0.245
0.225
0.127
0.245
0.225
0.127
0.245
0.225
0.127
# Conductors Conduit Size
Destination
1
1
2
0.75
8
1.25
1
2
2
4
1
8
24
1.25
8
1.25
1
0.75
2
0.75
2
0.75
2
0.75
1
1
2
0.75
2
0.75
10
2
10
2
2
2
4
1
2
2
4
1
1
2
4
1
1
2
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
27
14
15
15
15
16
16
16
17
18
18
18
19
19
19
20
20
20
21
21
21
22
22
22
23
23
23
24
24
24
26
26
26
26
26
4G
4G
4G
4G
3G
3G
3G
2G
4G
4G
4G
4G
4G
4G
4G
4G
4G
4G
4G
4G
4G
4G
4G
4G
4G
4G
3G
3G
3G
BOHC Video Patch Video
BOHL Video Patch CAT6
BOHL Video Patch Clear Com
BOHL Video Patch Video
BOH Audio Patch
CAT6
BOH Audio Patch
Clear Com
BOH Audio Patch
Line
Green Room Clear Com
Clear Com
Balc C Video Patch CAT6
Balc C Video Patch Clear Com
Balc C Video Patch Video
Balc Rear R Video Patch
CAT6
Clear Com
Video
Booth R Video Patch CAT6
Booth R Video Patch Clear Com
Booth R Video Patch Video
Booth C Video Patch CAT6
Booth C Video Patch Clear Com
Booth C Video Patch Video
Booth L Video Patch CAT6
Booth L Video Patch Clear Com
Booth L Video Patch Video
Balc Rear L Video Patch
CAT6
Clear Com
Video
Booth FOH audio patch
CAT6
Clear Com
Line
Stage Rack
CAT6
Stage Rack
AV
Stage Rack
AV
Stage Rack
AV
Stage Rack
AV
841
4246
291
841
4246
291
291
291
4246
291
841
4246
291
841
4246
291
841
4246
291
841
4246
291
841
4246
291
841
4246
291
291
4246
291
291
4246
8G
0.245
0.225
0.127
0.245
0.225
0.127
0.127
0.127
0.225
0.127
0.245
0.225
0.127
0.245
0.225
0.127
0.245
0.225
0.127
0.245
0.225
0.127
0.245
0.225
0.127
0.245
0.225
0.127
0.127
0.225
0.127
0.127
0.225
0.244
4
1
2
4
3
2
12
2
1
2
4
1
2
4
1
2
4
1
2
4
1
2
4
1
2
4
3
2
12
2
8
2
2
5
1
27
1
27
1
0.75
27
25
1
27
1
27
1
25
1
25
1
25
1
27
1
25
2
25
2
25
26
26
26
26
26
27
27
27
25
25
30 1G
Stage Rack
To Head End
To Head End
To Head End
To Head End
Ceiling/Catwalk
Ceiling/Catwalk
Ceiling/Catwalk
70V feed
70V feed
Lobby 2nd Floor
AV
CAT6
Video
CAT6
Video
Audio
Network
Video
Speaker
Speaker
Clear Com
841
4246
841
4246
841
226
226
291
0.245
0.225
0.245
0.225
0.245
0.23
0.23
0.127
8
8
8
Spare
Spare
1
1
2
2
2
2
2
2
2
2
2
0.75
0.75
0.75
25
Head End
Head End
Head End
Head End
26
26
26
2nd floor lobby ceiling space
1st floor lobby ceiling space
25

Project SS-1114 Drawings

Transcription

Similar documents

How to make a saddle rack

How the lab tested LCD monitors

Brochure AP-810-AH-T

bachmaster unit 2 patches

Vertical AVTV Installs Video Conferencing and Crestron Control

AV Tuners 232-ATSC+ HDTV Tuner

RackBuilder® Delivered - Milestone AV Technologies

Case Study - Crestron Asia Ltd

Peter Systemtechnik GmbH