Rexnord® 6000 Series SHURLOK™ Adapter Mount Roller Bearings

Transcription

Rexnord® 6000 Series SHURLOK™
Adapter Mount Roller Bearings
Not Installed
Installed
With New Spyglass™ Optical
(English-Inch)
Strain Sensor
REXNORD® ROLLER BEARINGS Rugged. Responsive. Reliable
Rexnord is proud to announce the new Rexnord®
6000 Series SHURLOK™ Adapter Mount Roller
Bearing. Increase your operation’s efficiency and
profitability by reducing installation errors,
maintenance costs, and down time. The
bearing’s rugged and adaptable design make it
excellent for mining, aggregate production,
forest products, and other demanding
applications.
The innovative new Rexnord 6000 Series
SHURLOK Adapter Mount Roller Bearing
requires less lubrication and is ideal for ISO
14000 compliance.
Shaft mounting errors are a thing of the past
with the breakthrough proprietary Spyglass™
Optical Strain Sensor (OSS).
A Positive Locking feature and single housing
construction also provide easy installation and
removal, and enable use of inexpensive
commercial grade shafting.
SHURLOK bearings are available in all Rexnord
housings for shaft sizes from 1-15/16 inches to
4-15/16 inches. It also has auxiliary end cap
seal configurations and three interchangeable
seal options to meet unique application needs.
ZA 6000
VS.
Imperial®
• 25% greater shaft grip means less vibration and
maintenance.
• Quick release feature allows easy removal for maintenance,
plus the adapter assembly with Spyglass™ OSS can be
reused.
• Positive Locking system maintains shaft mount tightness,
eliminating the need for later mounting inspections.
• Spyglass OSS takes the guesswork out of installation,
eliminating damage to the shaft caused by loose mounting.
ZAF 6000
VS.
SAF
• Spyglass OSS eliminates the subjectivity of determining shaft
mounting tightness.
• Rugged one-piece housing decreases installation/removal
time by as much as 4 times versus SAF models.
• Factory pre-lubricated elements require 4 times less annual
lubrication than SAF models - ISO 14000 friendly!
• Factory pre-set clearances. Solid housed units with factory
pre-set clearances reduce installation time up to 4 times!
2
Featuring Rexnord’s NEW SHURLOK™ Adapter Mounts
Taking the mystery out of mounting
Auxiliary end caps & three field
interchangeable seal options ensures
long bearing life through a full range of
applications
Self aligning spherical roller bearing
provides a total of 3 degrees static and
dynamic misalignment
Adapter sleeve assembly allows
easy installation/removal, plus
enables use of commercial grade
shafts
Super-finished raceways provide
a cool running, quiet, high speed
and high load capacity bearing
Positive Locking System allows
minimal vibration during operation,
therefore not requiring scheduled
inspections for snugness of
mountings
Hour Glass Roller elements are precision
ground and super finished to provide
longer bearing life
Spyglass™ Optical Strain Sensor (OSS)
Technology reduces installation errors
by changing color when tight
Y
X
Not Installed
X
Y
Installed
Positive Locking System
Mounting locknut utilizing Spyglass OSS
Easy Installation: Simply
tighten the locknut until the
Spyglass™ shows proper indication
Rexnord 6000 Series SHURLOK Roller Bearings are also Available with these Housings
Pillow Block
Flanged Units
Flanged Cartridge
Takeup Units
Takeup Assemblies
3
SELF-ALIGNING ROLLER BEARINGS
PILLOW BLOCKS
Page
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Mount ZA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Mount ZAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Mount ZAF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Mount ZAFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Mount ZEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mount ZP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Mount ZPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ZA
ZAF
FLANGE BLOCKS
Page
Adapter
Adapter
Adapter
Adapter
Mount
Mount
Mount
Mount
ZB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ZEF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
ZF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
ZFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
ZEF
ZB
FLANGE CARTRIDGE BLOCKS
Page
Adapter Mount ZBR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ZBR
4 (1070)
ZBR
© Rexnord Industries, LLC, 2007
CARTRIDGE BLOCKS
Page
Page
Adapter Mount Center Pull ZCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Normal Duty Protected Screw ZMC. . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ZCS
ZMC
TAKE-UP BLOCKS
Pages
Adapter Mount Center Pull ZT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
ZT
ZT
TAKE-UPS
Page
Page
Adapter Mount Center Pull ZHT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Normal Duty Protected Screw ZNT . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
ZHT
ZNT
(1070) 5
NOMENCLATURE
Z
A
-
6
207
207
F
Rexnord
Z
Seal Type K
Housing
Type
Bearing
Type
Shaft
Diameter
Clearance seal
Z
Light contact seal
K
M
Heavy contact seal
M
A
Pillow block normal duty
A
AS
Pillow block floating
AS
AF
Pillow block, heavy duty
AF
AFS
Pillow block, floating
AFS
P
Pillow block, heavy duty
P
PS
Pillow block, floating
PS
EP
Pillow block, Type E
EP
B
Flange block, normal duty
B
EF
Flange block, Type E
EF
F
Flange block, heavy duty
F
FS
Flange block, floating
FS
BR
Flange cartridge block
BR
CS
Cartridge block
CS
MC
Cartridge block
MC
6
6000 Series, tapered
adapter sleeve
6000
207
2-7/16 — last two digits in
16th of an inch
207
STANDARD PREFIX AND SUFFIX IDENTIFICATION
A
Z
A
-
6
Prefixes
A-
Two open auxiliary end cap seals.
B-
Two auxiliary end cap seals (one open, one closed)
-A
One open auxiliary end cap seal (cover side)
-B
One closed auxiliary end cap seal (cover side)
-F
Four bolt (pillow blocks only)
-G
Face-locked threaded cover
-S
Machined pilot on face of flange units
-Y
Redesigned shaft size — Not interchangeable
Suffixes (Added after shaft size designation)
-For identification of all other numerical suffixes, contact local Rexnord office
6 (1070)
TAKE-UP NOMENCLATURE
Z
Z
Clearance seal
K
Light contact seal
M
Heavy contact seal
N
Block for protected screw frame
T
Block for center pull frame
NT
Protected screw take-up
HT
Heavy duty center, pull take-up
Take-up
Frame Size
11
Size Code (from specification page)
Shaft
Diameter
315
3-15/16” — last two digits in 16th of an inch
Take-up
Travel
24
Inches of take-up adjustment
Seal Type
Housing
Type
HT
11
-
6
315 -
24
(1070) 7
INTERCHANGE GUIDE
Z
Rexnord
Dodge
A
-
6
207
SKF
A
PB2-IP
PB4-IP
SYR-NH
AS
P2B-IP Suffix E
P2B-IP Suffix E
SYR-N
AF
P2B500-ISAF
P4B500-ISAF
SAF22500
AFS
P2B500-ISAF Suffix E SAF22500
P4B500-ISAF Suffix E
P
Housing
Type
PS
B
EP2B-IP
EP4B-IP
F3R-IP F4R-IP
EF
EF4B-IP
F
F4S-IP
FS
F4S-IP Suffix E
BR
FC-IP
EP
SYE-NH
FSYE-NH
CS
MC
Bearing
Type
6000
IP-(Imperial)
N-(CONCENTRA)
Shaft
Diameter
207
207
2-7/16
TAKE-UP INTERCHANGE GUIDE
Z
Rexnord
Dodge
HT
11
-
6
207
315 -
24
SKF
N
Housing Type
T
WSTU-IP
TBR-NH
NT
TP
CP
TRH-NHPA
HT
8 (1070)
Take-up
Frame Size
11
Shaft
Diameter
315
315
3-15/16
Take-up
Travel
24
24
24
INTERCHANGEABLE SEALS
Effective seals are essential to insure satisfactory bearing life
in various application environments. Three interchangeable,
standard seals are available to cover a broad range of
conditions.
All Rex seals assure sealing protection up to a total of 3 degrees
misalignment in all directions. Sealing is on hardened and
ground inner ring extensions. Rex seals cannot be forced out
during relubrication, yet can easily be removed when replacing
or when inspecting grease.
All Rexnord interchangeable seals:
• provide sealing up to a total of 3 degrees misalignment
• operate on hardened and ground inner ring extension
• cannot be forced out during relubrication
• can be easily removed without damage
• can be removed without bearing disassembly
SEAL TYPES
“Z” Seal
Clearance
“K” Seal
Light Contact
Denoted with a “Z” prefix in the model number.
The standard seal used in the majority of
applications.
Substitute prefix “K” for “Z” in model number.
Molded nitrile rubber lip seals
out contaminants.
•
•
•
•
Protects against contaminants
•
•
•
No frictional drag — generates no
heat
No speed limitations
All metal — no temperature limitations
“M” Seal
Heavy Contact
Substitute prefix “M” for “Z” in model number.
Premium elastomer, spring loaded contact lip.
•
•
Protects against liquids and grit
Less drag and heat generation than heavy
contact seals
•
Molded-in garter spring retains seal
in housing
Only available on Size Codes 6-11
•
Seals in lubricant on horizontal and vertical
shafts
•
Available in viton material
Handles high speeds
Spring loaded lip assures constant
contact-even during misalignment
AUXILIARY END CAP SEALS
5-Point Protection Plan
1
2
3
4
5
Seal 3. The large cavity can be left empty to trap dry
contaminants or filled with grease to repel moisture.
Seal 4. A pliable neoprene gasket provides a
positive static seal between the cap and the
housing.
Seal 5. The primary bearing seal is left in
position to provide a final barrier. The Z, K, or M
seal may be chosen to best fit the application.
Recommended for severe environments— they
provide supplemental protection for the primary
seal.
Rexnord auxiliary end caps increase the life of
critical bearings and reduce costly downtime by
sealing out harmful contaminants. Auxiliary end
caps provide five independent barriers to
exclude all types of contaminants.
•
Seal 1. A Nitrile rubber V-ring seal is press fit onto
the shaft against the machined face of the
auxiliary end cap. The V-ring seal rotates with the
shaft to act as a slinger as well as a contact seal.
•
Provides safety, encloses rotating mounting
hardware
•
•
Protects primary seal from physical damage
•
Available as open or closed end cap
Seal 2. The machined multi-groove labyrinth
provides a second barrier without damaging
expensive shafts.
Auxiliary End Cap Seals
Seals against liquids and gritty
contaminants. Particularly effective against
water washdown, taconite, cement, sand, or
caking build-up.
See Standard Prefix and Suffix
Identification, Page 8.
May be filled with grease to provide purging
action
(1070) 9
ZA/ZAS PILLOW BLOCKS
6000 Series
SHURLOK Adapter Mount
E
E
45°
C
C
W
L
L
K
J
W
A
H
G
B
I
F
G
Floating Block
Fixed Block
Specifications . . . Radial Load Ratings are Shown on Page 24 — Floating Units Allow for 3/8" Axial Movement
Complete
Block
No.
Shaft Size
Inches
Fixed
1-15/16
1-15/16
2-3/16
2-3/16
2-3/8
2-3/8
2-7/16
2-7/16
2-11/16
2-11/16
2-3/4
2-3/4
2-15/16
2-15/16
3-3/16
3-3/16
3-7/16
3-7/16
3-11/16
3-11/16
3-15/16
3-15/16
ZA-6115
ZA-6115-F
ZA-6203
ZA-6203-F
ZA-6206
ZA-6206-F
ZA-6207
ZA-6207-F
ZA-6211
ZA-6211-F
ZA-6212
ZA-6212-F
ZA-6215
ZA-6215-F
ZA-6303
ZA-6303-F
ZA-6307
ZA-6307-F
ZA-6311
ZA-6311-F
ZA-6315
ZA-6315-F
Size
Code
Floating
ZAS-6115
ZAS-6115-F
ZAS-6203
ZAS-6203-F
ZAS-6206
ZAS-6206-F
ZAS-6207
ZAS-6207-F
ZAS-6211
ZAS-6211-F
ZAS-6212
ZAS-6212-F
ZAS-6215
ZAS-6215-F
ZAS-6303
ZAS-6303-F
ZAS-6307
ZAS-6307-F
ZAS-6311
ZAS-6311-F
ZAS-6315
ZAS-6315-F
Bolts
Req’d
Dimensions in Inches
A
B
+/-0.005
C
E
6
2-1/4
6-1/4
3-41/64 1-1/8
7
2-1/2
6-3/4
3-49/64 1-5/32
8
2-3/4
7-1/8
4-5/32
9
3-1/4
8-1/8
4-17/32 1-25/64
10
3-3/4
10
5-9/64
11
4-1/8
4-1/4
4-1/8
4-1/4
10-7/8
12-1/2
10-7/8
12-1/2
1-27/64
1-19/32
5-31/32 1-47/64
F
G
H
8-1/8
8-3/8
8-5/8
8-7/8
9-1/8
9-1/4
9-1/8
9-1/4
10-3/8
10-7/16
10-3/8
10-7/16
10-3/8
10-7/16
13-3/16
13
13-3/16
13
14-1/4
15-1/4
14-1/4
15-1/4
2-7/16
3-3/16
2-9/16
3-1/4
2-5/8
3-3/8
2-5/8
3-3/8
3-3/16
3-3/4
3-3/16
3-3/4
3-3/16
3-3/4
3-7/16
4-1/8
3-7/16
4-1/8
4-1/8
4-1/2
4-1/8
4-1/2
1-1/4
1-3/8
1-3/8
1-5/8
1-5/8
1-3/4
1-5/8
1-3/4
1-11/16
2-1/4
1-11/16
2-1/4
1-11/16
2-1/4
1-7/8
2-1/4
1-7/8
2-1/4
2-1/8
2-5/8
2-1/8
2-5/8
I
...
1-9/16
...
1-11/16
...
1-3/4
...
1-3/4
...
1-7/8
...
1-7/8
...
1-7/8
...
2
...
2
...
2-1/4
...
2-1/4
J
15/16
13/16
1
13/16
1
13/16
1
13/16
1-1/8
15/16
1-1/8
15/16
1-1/8
15/16
1-5/8
1-1/2
1-5/8
1-1/2
1-3/4
1-1/4
1-3/4
1-1/4
K
L
W
4-9/16 2-5/16
2-55/64
5
2-5/8
3-15/64
5-1/2
2-29/32 3-19/32
6-7/16 3-3/8
4-3/32
7-1/2
3-31/32 4-61/64
8-1/2
8-5/8
8-1/2
8-5/8
4-9/16
5-43/64
No. Size
2
4
2
4
2
4
2
4
2
4
2
4
2
4
2
4
2
4
2
4
2
4
Complete
Block
Net Wt
Lb
5/8
1/2
5/8
1/2
5/8
1/2
5/8
1/2
3/4
5/8
3/4
5/8
3/4
5/8
7/8
3/4
7/8
3/4
1
3/4
1
3/4
10.9
11.7
12.9
15.3
16.1
16.9
16.3
16.6
27.3
28.0
26.9
26.8
26.0
26.8
41.8
42.1
40.3
40.6
58.0
63.0
56.0
61.0
Bore Size=Nominal Shaft Size +.001 - .000
Seals – To Specify K or M seal, replace “Z” in model number with “K” or “M”
Auxiliary End Caps – not available ZAS Series
Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request.
10 (1070)
ZAF/ZAFS PILLOW BLOCKS
6000 Series
E
E
J
30°
C
C
K
W
L
W
A
H
B
G
G
F
Fixed Block
Floating Block
Specifications . . . Radial Load Ratings are Shown on Page 24 — Available Expansion on Floating Units – See Below
Shaft
Size
Inches
2-7/16
2-7/16
2-11/16
2-11/16
2-15/16
2-15/16
3-7/16
3-7/16
3-15/16
4-7/16
4-15/16
Complete
Block
No.
Fixed
Floating
ZAF-6207
ZAF-6207-F
ZAF-6211
ZAF-6211-F
ZAF-6215
ZAF-6215-F
ZAF-6307
ZAF-6307-F
ZAF-6315-F
ZAF-6407Y-F
ZAF-6415-F
ZAFS-6207
ZAFS-6207-F
ZAFS-6211
ZAFS-6211-F
ZAFS-6215
ZAFS-6215-F
ZAFS-6307
ZAFS-6307-F
ZAFS-6315-F
ZAFS-6407Y-F
ZAFS-6415-F
Bolts
Req’d
Size
Code
A
+/0.005
B
Min
Max
C
E
F
+/-.0075
8
3-1/4
8-5/8
9-5/8
4-5-32
1-27/64 11.125
9
3-1/2
9-7/8
11
4-17/32
1-25/64 12.594
9
3-3/4
9-7/8
11
4-17/32
1-25/64 12.594
10
4-1/2
1-19/32 15.375
4-15/16
6
6
13-1/8
13-1/8
14-1/2
16
17-3/8
5-9/64
11
12
13
11-13/16
11-5/8
12-19/32
14-1/2
15-5/8
5-31/32
6-1/4
7-15/16
1-47/64 16.500
1-7/8
18.375
2-1/4
19.703
G
H
I
...
1-7/8
...
3-1/2
1
2-1/8
...
3-1/2
1-1/4
2-1/8
...
4-11/32 1-21/32
2-3/8
4-3/4
1-25/32 2-3/4
5-1/8
2-1/16 3-1/4
5-7/8
2-1/16 3-3/8
3-1/8
1-1/4
J
1/1/4
1-1/8
1-7/16
1-5/16
1-7/16
1-5/16
1-21/32
1-5/8
1-53/64
1-3/4
1-15/16
K
W
7
3-19/32
7-5/8
4-3/32
7-7/8
4-3/32
9-3/8
4-61/64
10-5/16 5-43/64
11-7/8 6-1/16
12-9/16 6-61/64
Complete Block
Net Wt Lb
No. Size Fixed Floating
2
4
2
4
2
4
2
4
4
4
4
5/8
1/2
3/4
5/8
3/4
5/8
7/8
3/4
3/4
7/8
1
32.5
31
45.5
44.5
45.5
45.0
76.5
75.0
102
143
207
32.5
31.5
45.0
44.5
45.5
45.5
76.5
75.5
104
144
209
Bore Size = Norminal Shaft Size +.001 - .000
Expansion – Size Code 4-8 is 3/8”. Size Code 9-11 is 1/2”, Size Code 12-13 is 3/4”.
Seals – To Specify K or M seal, replace “Z” in model number with “K” or “M” – “K” only available Size Code is 8-11.
(1070) 11
ZEP PILLOW BLOCKS
6000 Series
E
E
30°
C
L
C
K
W
L
W
A
H
B
G
I
F
G
Specifications . . . Radial Load Ratings are Shown on Page 24
Shaft Size
Inches
Complete
Block
No.
1-15/16
2-3/16
2-3/8
2-3/8
2-7/16
2-7/16
2-11/16
2-11/16
2-3/4
2-3/4
2-15/16
2-15/16
3-3/16
3-3/16
3-7/16
3-7/16
3-11/16
ZEP-6115
ZEP-6203
ZEP-6206
ZEP-6206-F
ZEP-6207
ZEP-6207-F
ZEP-6211
ZEP-6211-F
ZEP-6212
ZEP-6212-F
ZEP-6215
ZEP-6215-F
ZEP-6303
ZEP-6303-F
ZEP-6307
ZEP-6307-F
ZEP-6311-F
3-15/16
ZEP-6315-F
4-3/16
ZEP-6403Y-F
4-7/16
ZEP-6407Y-F
4-15/16
ZEP-6415-F
Size
Code
A
B
+/-0.005
Min
2-1/4
6
2-1/2
6-1/2
6-7/8
8-1/4
2-3/4
6 -7/8
8-1/4
7-13/16
9-1/8
7-13/16
3-1/8
9-1/8
7-13/16
9-1/8
9-1/4
10- 9/16
3-3/4
9-1/4
10-9/16
9-3/4
9-7/8
9-3/4
9-7/8
9-3/4
9-7/8
11-5/16
11- 7/16
11- 5/16
11- 7/16
11
4-1/4
12
12
4-3/4
13
5-1/2
6
7
8
9
10
Bolts
Req’d
C
E
F
Max
7-1/4
8
3-41/64
3-49/64
1-1/8
1-5/32
8-3/4
4-5/32
1-27/64 10-1/2
4-17/32
8-7/8
9-5/8
1-25/64 12
G
2-7/16
2-9/16
2-5/8
3-1/2
2-5/8
3-1/2
3-3/16
4
3-3/16
4
3-3/16
4
3-7/16
4-1/2
3-7/16
4-1/2
H
I
1-5/16
1-1/2
...
...
...
1-7/8
...
1-7/8
...
2-1/8
...
2-1/8
...
2-1/8
...
2-3/8
...
2-3/8
6-1/4
3-3/8
4-3/32
7-3/8
7-1/2
7-3/8
7-1/2
3-31/32
4-61/64
1-5/8
1-7/8
2-1/4
K
4-7/16
4-15/16
5-7/16
5-1/2
5-7/16
5-1/2
L
Complete
Block
Net Wt
Size
Lb
W
No.
2-5/16
2-5/8
2-55/64
3-15/64
2-29/32
3-19/32
2
2
2
4
2
4
2
4
2
4
2
4
2
4
2
4
3/4
5/8
3/4
5/8
3/4
5/8
7/8
3/4
7/8
3/4
5/8
5/8
5/8
5-9/64
1-19/32 14
13
5-31/32
1-47/64 15-1/4
4-1/2
2-5/8
2-1/4
8- 5/8
4-9/16
5-43/64
4
3/4
12- 7/8
14-1/8
6-1/4
1-7/8
16-1/2
4-5/8
2-3/4
2-1/2
9-3/8
5-1/32
6-1/16
4
3/4
14-7/8
16-1/8
7-15/16
2-1/4
18-1/2
5-9/16
3
2-3/4
11-1/8
5-3/4
6-61/64
4
7/8
12.1
16.5
19.3
19.4
18.5
18.3
31.5
31.0
31.0
30.5
28.7
28.2
47.1
47.6
44.7
45.2
65.5
64.8
81.0
78.0
150.0
Bore Size = Nominal Shaft Size +.001–.000.
Seals – to Specify K or M seal, replace "Z" in model number with "K" or "M" – "K" only available size code 6-11.
12 (1070)
ZP/ZPS PILLOW BLOCKS
6000 Series
E
E
30°
C
C
W
L
K
W
L
J
A
H
G
I
G
B
F
Floating Block
Fixed Block
Specifications . . . Radial Load Ratings are Shown on Page 24— Available Expansion on Floating Units – See Below
Shaft
Size
Inches
1-15/16
1-15/16
2-3/16
2-3/16
2-7/16
2-7/16
2-7/16
2-7/16
2-11/16
2-11/16
2-3/4
2-3/4
2-15/16
2-15/16
3 -3/16
3 -7/16
3-11/16
3-15/16
4-3/16
4-7/16
4 15/16
Complete
Block
No.
Fixed
ZP-6115
ZP-6115-F
ZP-6203
ZP-6203-F
ZP-6206
ZP-6206-F
ZP-6207
ZP-6207-F
ZP-6211
ZP-6211-F
ZP-6212
ZP-6212-F
ZP-6215
ZP-6215-F
ZP-6303-F
ZP-6307-F
ZP-6311-F
ZP-6315-F
ZP-6403Y-F
ZP-6407Y-F
ZP-6415-F
Floating
ZPS-6115
ZPS-6115-F
ZPS-6203
ZPS-6203-F
ZPS-6206
ZPS-6206-F
ZPS-6207
ZPS-6207-F
ZPS-6211
ZPS-6211-F
ZPS-6212
ZPS-6212-F
ZPS-6215
ZPS-6215-F
ZPS-6303-F
ZPS-6307-F
ZPS-6311-F
ZPS-6315-F
ZPS-6403Y-F
ZPS-6407Y-F
ZPS-6415-F
Bolts
Req’d
Size
Code
A
+/0.005
B
C
E
Fixed
F
H
I
2-7/8
9 -3/4
4
3-1/8
10-1/4
4-1/8
3-3/8
4-1/2
11-1/4
3-3/8
4-1/2
3-7/8
5
3-7/8
13
5
3-7/8
5
1-7/16
1
1-5/8
1
1-3/4
1-1/8
1-3/4
1-1/8
2-1/16
1-3/8
2-1/16
1-3/8
2-1/16
1-3/8
...
2-1/4
...
2-1/4
...
2-5/8
...
2-5/8
...
2-3/4
...
2-3/4
...
2-3/4
4-3/4
1-1/4
5
5-1/4
1-1/4
5-1/2
1-3/8
5-3/4
1-15/16 6
1-3/8
5-3/4
1-15/16 6
1-5/8
6-23/32
1-1/2
7-1/16
1-5/8
6-23/32
1-1/2
7-1/16
1-5/8
6-23/32
1-1/2
7-1/16
4-5/16
5-5/32
2-55/64
5-23/32
3-15/64
Floating
6
2-1/2
7
3-41/64 1-1/8
1
7
2-3/4
7-1/2
3-49/64 1-5/32
1-1/16
G
J
K
Fixed
Floating
6-3/16
6-7/32
6-3/16
6-7/32
7-3/16
7-5/16
7-3/16
7-5/16
7-3/16
7-5/16
W
2
4
2
4
2
4
2
4
2
4
2
4
2
4
8
3
8-1/4
4-5/32 1-27/64 1-19/64
9
3-1/2
9-3/4
4-17/32 1-25/64 1-17/64
10
4
11-1/2 5-9/64 1-19/32 1-15/32
15
5
1-1/2
3
1-1/2
8-1/8
8-3/8
4-61/64
4
11
5
13-1/4 5-31/32 1-47/64 1-39/64
16-3/4 6
1-1/2
3-1/2 1-1/2
9-7/8
10-1/4
5-43/64
4
12
5-3/4
14-3/4 6-1/4
1-3/4
18-1/2 6-3/4
1-3/4
4
1-13/16 11-1/4 11-5/8
6-1/16
4
13
6-1/8
16
2-1/64
20-1/4 7-1/2
1-7/8
4-1/4 2
1-7/8
7-15/16 2-1/4
12-1/2 13-1/8
3-19/32
No. Size
4-3/32
6-61/64 4
Complete Block
Net Wt Lb
Fixed Floating
5/8
5/8
5/8
5/8
3/4
5/8
3/4
5/8
7/8
3/4
7/8
3/4
7/8
3/4
13.4
15.8
17.5
19.6
22.2
25.4
21.2
24.4
35.2
38.2
34.2
36.5
33.9
37.2
52.0
3/4
51.0
86.0
7/8
84.0
110.0
1
118.0
1-1/8 171.0
16.1
17.7
21.8
22.1
25.9
28.4
25.9
27.4
43.4
44.2
42.4
42.5
42.5
43.4
59.0
57.0
98.0
96.0
122.0
119.0
206.0
Bore Size = Norminal Shaft Size +.001 - .000
Expansion – Size Code 6-8 is 3/8”. Size Code 9-11 is 1/2”, Size Code 12-13 is 3/4”.
Seals – To Specify K or M seal, replace “Z” in model number with “K” or “M” – “K” only available Size Code is 6-11.
(1070) 13
ZB FLANGE BLOCKS
6000 Series
3/16
G
G
SQUARE
Y
Y
C
S L
W D
C
B
SQUARE
WD
L
B
1/8
H
Side View Flange
With Pilot
R
E
H
E
R
Full Side View
Flange Block
Four Hole Square
Flange Block
Four Hole Round
Flange Block
Shaft
Size
Inches
Complete
Block
No. H
1-15/16
2-3/16
2-3/8
2-7/16
2-11/16
2-3/4
2-15/16
ZB-6115
ZB-6203
ZB-6206
ZB-6207
ZB-6211
ZB-6212
ZB-6215
3-3/16
3-7/16
3-11/16
3-15/16
ZB-6303
ZB-6307
ZB-6311
ZB-6315
Size
Code
B
C
D
E
6
7
4-1/16
4-1/2
3-41/64
3-49/64
4-1/4
4-7/8
1-1/8
1-5/32
4 BOLT ROUND
7
11/16 2-5/16
7-3/4
11/16 2-5/8
8
4-49/64
4-5/32
5-3/8
1-27/64
8-1/8
3/4
9
5-9/16
4-17/32
6-1/4
1-25/64
9-1/2
7/8
G
H
Bolts Req’d
S
+.000
-.003
W
Y
No.
Size
2-7/8
3-3/16
4-3/8
5
2-55/64
3-15/64
3/32
1/8
4
4
1/2
5/8
2-29/32
3-3/8
5-7/16
3-19/32
1/8
4
5/8
3-3/8
3-15/16
6-5/16
4-3/32
1/8
4
3/4
L
R
Complete
Block
Net Wt
Lb
9.8
13.3
16.7
16.6
26.5
26.1
25.6
4 BOLT SQUARE
10
6-23/32
5-9/64
7-3/8
1-19/32
8-7/16
1
3-31/32
4-3/4
7-3/8
4-61/64
1/4
4
3/4
11
7-19/32
5-31/32
8-1/2
1-47/64
9-3/4
1-1/8
4-9/16
5-3/8
8-1/2
5-43/64
1/4
4
7/8
37.0
34.6
59.0
56.0
H Pilot – use Suffix S
Bore Size = Nominal Shaft Size +.001 - .000
Seals – To specify K or M seal, replace “Z” in model number with “K” or “M”
Auxiliary End Caps – Not available in Size Codes 6, and Size Code 7 on the Flange side of non Piloted Bearings
– Not available in Size Code 6, and Size Code 7-9 on the Flange side of Piloted Bearings
14 (1070)
ZEF FLANGE BLOCKS
6000 Series
G
SQUARE
E
C
W
L
D
B
SQUARE
1/8
R
H
Shaft
Size
Inches
Complete
Block
No.
Size
Code
B
C
D
E
G
Bolts Req’d
H
L
R
W
No.
Size
1-15/16
ZEF-6115
6
4-3/8
3-41/64
4-1/2
1-1/8
5-3/8
1-1/2
2-5/16
3-3/32
2-55/64
4
1/2
2-3/16
ZEF-6203
7
4-7/8
3-49/64
5
1-5/32
6-1/4
1-1/2
2-5/8
3-29/64
3-15/64
4
5/8
2-3/8
ZEF-6206
2-7/16
ZEF-6207
2-11/16
ZEF-6211
2-3/4
ZEF-6212
8
5-3/8
4-5/32
5-1/2
1-27/64
6-7/8
1-11/16
2-29/32
3-51/64
3-19/32
4
5/8
9
6
4-17/32
6-1/2
1-25/64
7-3/4
1-13/16
3-3/8
4-1/4
4-3/32
4
3/4
Complete
Block
Net Wt
Lb
11.7
15.7
18.9
18.3
31.1
30.1
2-15/16
ZEF-6215
29.6
3-3/16
ZEF-6303
44.6
3-7/16
ZEF-6307
3-11/16
ZEF-6311
3-15/16
ZEF-6315
10
7
5-9/64
7-3/8
1-19/32
9-1/4
1-15/16
3-31/32
4-61/64
4-61/64
4
3/4
11
7-3/4
5-31/32
8-7/8
1-47/64
10-1/4
2-3/16
4-9/16
5-31/64
5-43/64
4
7/8
42.7
66.5
65.5
Bore Size = Nominal Shaft Size +.001-.000
(1070) 15
ZF/ZFS FLANGE BLOCKS
6000 Series
E
E
3/16
E
G
SQUARE
C
C
C
WD
WD
S
B
SQUARE
D
1/8
R
H
H
H
Side View Flange
With Pilot
Full Side View
Square Block
Floating
Full Side View
Flange Block
Fixed
Four Hole
Square Flange
Block
Specifications . . . Radial Load Ratings are Shown on Page 24— Available Expansion on Floating Units – See Below
Shaft
Size
Inches
Complete Block
No. H
Fixed
Floating
Size
Code
B
C
D
E
Fixed Floating
Fixed
Floating
G
H
R
2-7/8
S +.000 / -.003
Fixed
Floating
W
Bolts
Req’d
Complete Block
Net Wt Lb
No. Size Fixed Floating
4 Bolt Square
1-15/16 ZF-6115
ZFS-6115
6
4-1/16
3-41/64 4-1/2
5-1/8
1-1/8
1
5-5/16
5/8
2-3/16
ZF-6203
ZFS-6203
7
4-1/2
3-49/64 5
5-3/4
1-5/32
1-1/16
5-7/8
11/16 3-3/16
4-3/8
5-1/8
2-55/64
4
1/2
10.4
12.8
5
5-5/8
3-15/64
4
5/8
14.4
2-3/8
ZF-6206
ZFS-6206
18.0
17.8
2-7/16
ZF-6207
ZFS-6207
20.6
17.5
2-11/16 ZF-6211
ZFS-6211
20.3
29.9
ZF-6212
ZFS-6212
35.4
29.2
2-15/16 ZF-6215
34.7
ZFS-6215
28.9
3-3/16
34.1
ZF-6303
ZFS-6303
40.0
3-7/16
47.0
ZF-6307
ZFS-6307
38.0
45.5
3-11/16 ZF-6311
ZFS-6311
71.0
80.0
3-15/16 ZF-6315
ZFS-6315
69.0
77.0
98.0
127
96.0
124
2-3/4
8
9
10
11
5-1/32
6-1/64
4-5/32
4-17/32 6-1/2
6-23/32 5-9/64
8-5/16
5-1/2
7-3/8
5-31/32 8-7/8
6
7-1/8
8
9-1/2
1-27/64
1-25/64
1-19/32
1-47/64
1-19/64
1-17/64
1-15/32
1-39/64
6-7/16
7-3/4
8-7/16
10-9/16
3/4
7/8
1
3-9/16
4-1/4
5-7/16
6-5/16
4-3/4
7-3/8
6
7-1/8
8
3-19/32
4-3/32
4-61/64
4
4
4
5/8
3/4
3/4
1-1/8
5-7/8
8-7/8
9-1/2
5-43/64
4
1
1-1/4
6-7/16
10-3/8
11-5/8
6-1/16
6
1
6 Bolt Round (Holes at 60 Deg)
4-3/16
ZF-6403Y
ZFS-6403Y
4-7/16
ZF-6407Y
ZFS-6407Y
4-15/16 ZF-6415
...
4-15/16 . . .
ZFS-6415
12
13
6-7/16
7
6-1/4
9-1/2
11-5/8
1-7/8
7-15/16 11-3/16 12-9/16 2-1/4
1-3/4
2-1/64
15-1/8
16-1/2
1-1/2
7
11-3/16 12-9/16
6-61/64
6
1-1/8 159.0
1
184.0
H Pilot – Use Suffix S
Expansion – Size Code 6-8 is 3/8”, Size Code 9-11 is 1/2”, Size Code 12-13 is 3/4”
Seals – To specify K or M seal, replace “Z” in model number with “K” or “M” – “K” only available Size Code 6-11
Auxiliary End Caps – Not available in Size Code 12 ZFS. Also not available in Size Code 6 on the flange side of piloted bearings
16 (1070)
ZBR FLANGE CARTRIDGE BLOCKS
6000 Series
Y
M
F
N
C
S
W
E
A
3 JACKSCREW HOLES
PROVIDED
H
R
Shaft
Size
Inches
Complete
Block
No.
Size
Code
B
C
E
F
H
Bolts Req’d
M
N
R
S
+.000
-.002
W
Y
No. Size
Complete
Block
Net Wt
Lb
1-15/16
ZBR-6115
6
3-51/64 3-41/64
1-1/8
6-3/8
9/16
1-9/16
7/8
2-11/16
4.500
2-55/64
2-1/4
4
7/16
9.6
2-3/16
2-3/8
2-7/16
2-11/16
2-3/4
2-15/16
3-3/16
3-7/16
3-11/16
3-15/16
4-3/16
4-7/16
4-15/16
ZBR-6203
ZBR-6206
ZBR-6207
ZBR-6211
ZBR-6212
ZBR-6215
ZBR-6303
ZBR-6307
ZBR-6311
ZBR-6315
ZBR-6403Y
ZBR-6407Y
ZBR-6415
7
4-1/4
1-5/32
7-1/8
9/16
1-3/4
1
3
5.000
3-15/64
2-3/8
4
1/2
8
4-19/32 4-5/32
1-27/64
7-5/8
5/8
1-13/16
1
3-1/4
5.500
3-19/32
2-9/16
4
1/2
9
5-19/64 4-17/32
1-25/64
8-3/4
3/4
2
1-1/4
3-3/4
6.375
4-3/32
2-7/8
4
5/8
10
6-3/32
5-9/64
1-19/32
10-1/4
15/16
2-3/8
1-1/4
4-5/16
7.375
4-61/64
2-15/16
4
3/4
11
6-5/8
5-31/32
1-47/64
10-7/8
1-1/8
2-11/16
1-1/2
4-11/16
8.125
5-43/64
3-9/16
4
3/4
12
5-7/8
6-1/4
1-7/8
13-1/2
1
2-5/16
2
5-7/8
10.250
6-1/16
3-15/16
6
3/4
13
6-3/8
7-15/16
2-1/4
14-3/4
1-1/4
2-31/32
2-1/4
6-3/8
11.000
6-61/64
4-29/32
6
7/8
13.7
16.2
15.9
26.1
24.8
22.7
38.0
36.5
56.0
53.0
84.0
83.0
128.0
3-49/64
(1070) 17
ZCS CARTRIDGE BLOCKS
6000 Series
G
E
C
W
S
30°
Complete
Block
No.
Size
Code
C
1-15/16
ZCS-6115
6
3-41/64
2 -3/16
ZCS-6203
7
3-49/64
2 -3/8
ZCS-6206
2 -7/16
ZCS-6207
8
4-5/32
2-11/16
ZCS-6211
2 -3/4
ZCS-6212
2-15/16
ZCS-6215
3-3/16
ZCS-6303
3-7/16
ZCS-6307
3-11/16
ZCS-6311
3-15/16
ZCS-6315
Shaft
Size
Inches
G
J
K
L
S
+.000
-.002
W
Complete
Block
Net Wt
Lb
1-1/8
2.453
0.460
0.535
0.760
3.833
2-55/64
5.3
1-5/32
2.578
0.460
0.535
0.760
4.227
3-15/64
8.1
1-27/64
2.640
0.460
0.535
0.760
4.621
3-19/32
E
9.1
8.7
15.1
9
4-17/32
1-25/64
3.140
0.460
0.535
0.760
5.407
4-3/32
14.1
12.1
10
5-9/64
1-19/32
3.453
0.600
0.675
0.930
6.194
4-61/64
11
5-31/32
1-47/64
4.000
0.600
0.675
0.930
7.375
5-43/64
19.8
17.9
33.6
32.6
Auxiliary End Caps – Not available on ZCS Series
Expansion slot allows 3/8” float
s A locking pin and grease fitting is supplied with each unit as a means to lubricate and secure the bearing.
Recommended engagement of the locking pin into the cartridge is .125 +/-.015
L
¾
HEX
K
J
80° .620
.530
.145
5/8 – 18UNF
LOCKING PIN
18 (1070)
ZMC CARTRIDGE BLOCKS
6000 Series
E
G
G
C
C
S
W
Y
W
120°
X
X
G1
X
SIZE CODE 6-12
E
SIZE CODE 13
Shaft
Size
Inches
Complete
Block
No.
X Slot Dimensions
Size
Code
C
E
G
G1
Ss
Length
Width
+.041
-.000
Depth
W
Y
Complete
Block
Net Wt
Lb
6.5
1-15/16
ZMC-6115
6
3-41/64
1-1/8
2-7/16
...
4.125
29/32
0.531
3/16
2-55/64
...
2-3/16
ZMC-6203
7
3-49/64
1-5/32
2-9/16
...
4.531
29/32
0.531
3/16
3-15/64
...
2-3/8
ZMC-6206
2-7/16
ZMC-6207
2-11/16
ZMC-6211
2-3/4
ZMC-6212
2-15/16
ZMC-6215
3-3/16
ZMC-6303
3-7/16
ZMC-6307
3-11/16
ZMC-6311
3-15/16
ZMC-6315
4-3/16
ZMC-6403Y
4-7/16
ZMC-6407Y
4-15/16
ZMC-6415
8
4-5/32
1-27/64
2-5/8
...
5.000
29/32
0.531
3/16
3-19/32
...
9
4-17/32
1-25/64
3-1/8
...
5.875
1-1/32
0.594
1/4
4-3/32
...
9.5
10.9
10.6
18.7
17.7
15.7
24.7
10
5-9/64
1-19/32
3-7/16
...
6.750
1-1/16
0.594
9/32
4-61/64
...
11
5-31/32
1-47/64
4-1/8
...
8.125
1-9/32
0.781
5/16
5-43/64
...
12
6-1/4
1-7/8
4-1/4
...
8.750
1-1/2
0.781
5/16
6-1/16
...
13
7-15/16
2-1/4
5-9/16
6
10.437
1-1/2
0.781
5/16
6-61/64
7-25/32
22.8
44.0
41.5
50.0
47.0
95.0
Bore Size = Nominal Shaft Size +.001 -.000
Seals - to Specify K or M seal, replace “Z” in model number with “K or “M” – “K” only available Size Code 6-11
Auxiliary End Caps - Not available on ZMC Series
s Outside Diameter Tolerance: Size Code 6-11 = +.000/-.002, Size Code 12-13 = +.000/-.003
(1070) 19
ZT TAKE-UP BLOCKS
6000 Series
F
P
O
E
C
L
W
D H J
K K1
T
A
Q Specifications . . . Radial Load Ratings are Shown on Page 24
Allow.
Working
Load Q
Lb
Size
Code
1-15/16 ZT6-6115
12,300
6
3-15/16
3-41/64
3-5/16
1-1/8
6-3/16
1-15/16 1-1/8 4
4-1/2
2-3/16
ZT7-6203
13,500
7
4-5/8
3-49/64
3-7/8
1-5/32
7-1/8
2-1/4
1-3/8 4-1/2
5-1/4
2-3/8
ZT8-6206
2-7/16
ZT8-6207
20,900
8
5-1/16
4-5/32
4-1/4
1-27/64
7-13/16 2-1/4
1-3/8 5-1/8
5-7/8
2-29/32 1-1/4
26,800
9
5-15/16
4-17/32
4-7/8
1-25/64
9-1/8
1-5/8 5-15/16 6-11/16 3-3/8
Shaft
Size
Inches
Complete
Block
No.
A
C
D
E
F
H
J
K
+0.005
-0.015
K1
L
T
W
O
P
2-5/16
3/4
4-1/2
11/16
2-55/64
10.8
2-5/8
1-1/4
5
13/16
3-15/64
15.2
5-1/2
1-1/16
3-19/32
6-7/16
1-13/16 4-3/32
2-11/16 ZT9-6211
2-3/4
ZT9-6212
ZT10-6303
3-7/16
ZT10-6307
3-11/16 ZT11-6311
3-15/16 ZT11-6315
4-3/16
ZT12-6403Y
4-7/16
ZT12-6407Y
4-15/16 ZT13-6415
19.9
19.4
31.5
2-3/4
1-1/2
30.1
28.8
2-15/16 ZT9-6215
3-3/16
Complete
Block
Net
lb
27,300
10
6-5/16
5-9/64
5-3/8
1-19/32
10
2-7/8
1-7/8 6-13/16 7-13/16 3-31/32 1-5/8
7-3/8
1-13/16 4-61/64
45,400
11
7-11/16
5-31/32
5-3/8
1-47/64
12-3/8
3-3/8
2-1/8 8-5/8
9-7/16
4-9/16
2-1/8
8-7/8
2-1/16
53,700
12
8-11/16
6-1/4
6-3/8
1-7/8
13-7/16 3-3/8
2-1/8 9-1/2
10-3/8
5-1/32
2-1/8
9-13/16 2-1/16
6-1/16
68,000
13
9 -7/16
7-15/16
6-1/4
2-1/4
14-7/8
2-3/8 10-1/4
11-1/4
5-3/4
2-1/2
10-7/8
6-61/64
3-3/4
2-1/16
5-43/64
44.0
42.0
75.0
72.0
94.0
91.0
130.0
Q Allowable Working Load 2/3 yield strength
20 (1070)
ZHT TAKE-UP ASSEMBLIES
CENTER PULL TYPE
6000 Series
O
C
T - TRAVEL
X
T
K
Y
A
I
G
H
B
F
Specifications . . . Radial Load Ratings of Bearings — See Page 24
Shaft
Size
Inches
6000 Series
Complete
Take-up
Assembly
Take-up
Block
Only
-12
1-15/16 ZHT6-6115
2-3/16
ZHT7-6203
2-3/4
ZHT8-6206
2-7/16
ZHT8-6207
2-11/16 ZHT9-6211
2-3/4
ZHT9-6212
2-15/16 ZHT9-6215
3-3/16
ZHT10-6303
3-7/16
ZHT10-6307
3-11/16 ZHT11-6311
3-15/16 ZHT11-6315
4-3/16
ZHT12-6403Y
4-7/16
ZHT12-6407Y
4 15/16 ZHT13-6415
 -18
-24 ZT6-6115
 -30
 -36
-12
 -18
ZT7-6303
 -24
-30
 -36
-12
 -18 ZT8-6206
ZT8-6207
 -24
-30
 -36
-12
 -18 ZT9-6111
ZT9-6112
 -24
-30 ZT9-6215
 -36
-12
 -18 ZT10-6303
-24 ZT10-6307
 -30
 -36
-12
 -18 ZT11-6311
-24 ZT11-6315
 -30
 -36



-12



-12
-18
-24 ZT12-6403Y
-30 ZT12-6407Y
-36
-42
-18
-24
-30
-36
-42
ZT13-6415
Frame
Only
Allowable
Size
Working Code
Load†
Lb
A
-12
-18
-24
ZHT6
-30
-36
-12
-18
ZHT7
-24
-30
-36
-12
-18
ZHT8 -24
-30
-36
-12
-18
ZHT9 -24
-30
-36
-12
-18
-24
ZHT10
-30
-36
-12
-18
ZHT11
-24
-30
-36
12,300
13,000
16,300
26,800
27,300
6
7
8
9
10
Bolts
Req’d
3-15/16
4-7/16
4-3/8
5-1/8
5-5/8
B
C
F
G
H
I
K
T
Travel
O
X
Complete
Take-up
Y
Net
Wt
No. Size
Thread
Lb
27-1/2
29-1/2
15
19-1/2
59
33-1/2
35-1/2
21
25-1/2
69
39-1/2
3-41/64 41-1/2
45-1/2
47-1/2
33
37-1/2
39
43-1/2
4
7/8
...
8-7/16
27
6-9/16
31-1/2
1
8NC
2
5/8
77
86
51-1/2
53-1/2
27-1/2
29-1/2
70
33-1/2
35-1/2
81
39-1/2
3-49/64 41-1/2
45-1/2
47-1/2
51-1/2
53-1/2
28 -/2
30-1/2
15
34-1/2
36-1/2
21
40-1/2
4-5/32
42-1/2
4
1-3/16
...
9
15
6-13/16
20
95
1-1/4
7NC
2
5/8
90
98
108
4
3/4
...
9-3/16
27
46-1/2
48-1/2
33
77
7-1/2
20
86
1-1/4
7NC
2
3/4
96
107
52-1/2
54-1/2
39
30-1/2
32-1/2
16
21-3/4
36-1/2
38-1/2
22
27-3/4
42-1/2
4-17/32 44-1/2
48-1/2
50-1/2
34
39-3/4
54-1/2
56-1/2
40
45-3/4
191
32
34-1/4
16-1/4
22
152
38
40-1/4
22-1/4
28
28-1/4 8-3/4
34
44
5-9/64
46-1/4
5
5
7/8
7/8
2
2
10-3/4
11-13/16
28
119
8-1/8
33-3/4
128
142
1-1/2
6NC
4
5/8
159
174
177
1-3/4
6NC
4
3/4
186
50
52-1/4
34-1/4
40
56
58-1/4
40-1/4
46
224
36
38-1/2
17-1/2
26
241
42
44-1/2
23-1/2
32
48
5-31/32 50-1/2
29-1/2 10-5/8
38
54
56-1/2
35-1/2
44
60
62-1/2
41-1/2
50



-12
40-3/4
45-3/4
19
-18
46-3/4
51-3/4
25



ZHT12
ZHT13
-24
-30
38,400
53,300
11
12
7
7-1/2
52-3/4
58-3/4
6-1/4
57-3/4
63-3/4
6
8-7/8
7/8
1
2-1/2
5
14-3/16
15-1/2
31
37
26
69 3/4
43
-42
70 3/4
75 3/4
49
-12
44-1/2
49-1/2
20-1/4
29
-18
50 1/2
55 1/2
26 1/4
35
-30
13
8-1/8
56 1/2
62 1/2
7-15/16
61 1/2
67 1/2
9 -7/8
1
5-1/2
16-3/4
32 1/4
38 1/4
270
4
3/4
290
311
337
362
12-1/4
64 3/4
68,000
2
4-1/2NC
331
-36
-24
205
2
4-1/2NC
4
1-1/8
391
410
433
461
13-1/2
41
47
440
460
2-1/4
4-1/2NC
4
1-1/8
496
527
-36
68 1/2
73 1/2
44 1/4
53
555
-42
74 1/2
79 1/2
50 1/4
59
587
Bore Size=Nominal Shaft Size +.001 - .000
Seals - To Specify K or M seal, replace “Z” in model number with “K” or “M”
-"K" only available size code 6-11
† Allowable Working Load 2/3 yield strength
NOTE: Dimensions subject to change. Certified dimensions of ordered material furnished on request.
(1070) 21
ZNT TAKE-UP ASSEMBLIES
PROTECTED SCREW TYPE
6000 Series
C
T - TRAVEL
O
O
Q
X
Y
K
A
H
I
B
Z
F
G
G1
Specifications . . . Radial Load Ratings of Bearings are Shown on Page 24 — Frame Capacity listed in Table Below
Shaft
Size
Inches
Complete
Assembly No.
Take-up
Blocks
Only
Block
Wt
-12
-18
1-15/16 ZNT6-6115 -24
-30
-36
-12
-18
2-3/16 ZNT7-6203 -24
-30
-36
-12
2-3/8 ZNT8-6206 -18
2-7/16 ZNT8-6207 -24
-30
-36
-12
2-11/16 ZNT9-6211 -18
2-3/4 ZNT9-6212 -24

2-15/16 ZNT9-6215 -30
-36
-12
3-3/16 ZNT10-6303-18
3-7/16 ZNT10-6307-24
-30
-36
-12
3-11/16 ZNT11-6311-18
3-15/16 ZNT11-6315 -24
-30
-36
A
-12
ZN6-6115
ZN7-6203
13.6
18.4
ZN8-6206
22.6
ZN8-6207
22.4
ZN9-6211
33.7
ZN9-6212
32.7
ZN9-6215
32.2
ZN10-6303 48.0
ZN10-6307 46.2
ZN11-6311 87.5
ZN11-6315 86.5
 -18
ZNT6
 -24
-30
 -36
-12
 -18
ZNT7
 -24
-30
 -36
-12
 -18
ZNT8
-24
 -30
 -36
-12
 -18
ZNT9
 -24
-30
 -36
-12
 -18
ZNT10 -24
 -30
 -36
-12
 -18
ZNT11 -24
 -30
 -36
3,000
3,600
4,400
6,800
8,400
15,600
6
7
8
9
10
11
3-5/16
4-3/16
4-3/8
5-1/8
5-5/8
7
B
C
F
G1
H
I
K
Complete
Takeup
No. Size Net
Wt
Lb
Bolts
Req’d
Allowable
Frame
Size
Assemblies Working
Code
LoadH
Only
Lb
T
Travel
O
Q
X
Y
Z
47
26-1/2
28-1/2
12
25-3/8
32-1/2
34-1/2
18
31-3/8
38-1/2
3-41/64 40-1/2
44-1/2
46-1/2
30
43-3/8
50-1/2
52-1/2
36
49-3/8
72
27-1/2
29-1/2
12
26-3/8
51
33-1/2
35-1/2
18
32-3/8
39-1/2
3-49/64 41-1/2
45-1/2
47-1/2
30
44-3/8
51-1/2
53-1/2
36
50-3/8
80
28-1/2
30-1/2
12
27 3/4
61
34-1/2
36-1/2
18
33 3/4
40-1/2
4-5/32
42-1/2
3-1/2 3-13/16 1-3/4
3-1/2 3-13/16 1-3/4
3-1/2 3-15/16 1-3/4
...
...
...
8-1/4
8-11/16
9-1/8
24
24
24
7-1/4
7-3/4
8-1/4
1-7/32
1-9/32
1-5/16
37-3/8
38-3/8
39 3/4
3/4
10NC
3/4
10NC
7/8
9NC
52
3
2
5/8
65
56
3
2
5/8
68
75
65
3
2
3/4
76
46-1/2
48-1/2
30
45 3/4
52-1/2
54-1/2
36
51 3/4
87
30-1/2
32-1/2
12
30
87
36-1/2
38-1/2
18
36
42-1/2
4-17/32 44-1/2
48-1/2
50-1/2
30
48
54-1/2
56-1/2
36
54
130
32
34-1/4
12
32
120
38
40-1/4
18
38
44
5-9/64
46-1/4
4-1/2 51/16
2
4-1/2 5-3/16 2
2
2
10-5/8
11-3/4
24
24
9-1/4
10
1-9/16
42
1-23/32 44
1
8NC
1-1/8
7NC
81
95
4
4
3/4
115
122
129
4
4
3/4
147
50
52-1/4
30
50
56
58-1/4
36
56
168
36
36-1/2
12
36-5/16
211
42
44-1/2
48
5-31/32 50-1/2
18
54
56-1/2
30
54-5/16
60
62-1/2
36
605/16
5-1/2 6-3/8
2-1/4 2-1/2 14-1/2
24
42-5/16
12
2-1/16
48-5/16
1-1/4
7NC
156
219
5
4
3/4
Seals – To specify K or M seal, replace “Z” in model number with “K” or “M
H Allowable Working Load is 2/3 yield strength
22 (1070)
58
251
270
281
BEARING REPLACEMENT KIT
6000 Series
Kit contains: One inner race
and roller assembly, two
outer races, one adapter
sleeve assembly.
SIZE CODE
Shaft Size — Inches
Bearing Replacement Kit
Number
Wt Lb
6
1-15/16
6115U
3.1
7
2-3/16
6203U
4.0
2-3/8
2-7/16
2-11/16
2-3/4
2-15/16
6206U
6207U
5.0
5.0
6211U
6212U
6215U
8.7
8.5
7.5
11
3-3/16
3-7/16
3-11/16
3-15/16
6303U
6307U
6311U
6315U
12.9
11.4
23.0
20.7
12
4-3/16
4-7/16
6403YU
6407YU
29.6
26.75
13
4-15/16
6415U
48.0
8
9
10
(1070) 23
ENGINEERING
Size
Code
Load Rating
C
Co
Max
rpm
2
9900
9100
6500
3
14300 14200
5750
4
15900 16000
5250
5
6
7
8
9
10
11
12
20200 21300
23400 26200
27200 31800
38200 46800
46800 55700
82000 91900
4450
4050
3650
3300
2800
2400
118000 127500 2050
140400 144800 1850
13
159900 221700 1600
14
190000 282400 1000
15
212700 310600
900
16
235300 361500
800
Life
Hours
5000
15000
80000
5000
15000
80000
5000
15000
80000
5000
15000
80000
5000
15000
80000
5000
15000
80000
5000
15000
80000
5000
15000
80000
5000
15000
80000
5000
15000
80000
5000
15000
80000
5000
15000
80000
5000
15000
80000
5000
15000
80000
5000
15000
80000
RADIAL LOAD RATING TABLE (LB)
SPEED (RPM)
50
100
200
350
500
750
1000
1250
1500
1750
2000
2500
3000
3500
4000
4500
5000
Q
Q
1912
Q
Q
1553
Q
2085
1262
2451
1763
1067
2202
1584
968
1950
1402
849
1789
1286
779
1673
1203
728
1584
1139
689
1512
1088
658
1453
1045
632
1359
977
591
1286
925
560
1228
883
535
1180
849
514
1139
819
496
1104
794
480
Q
Q
2762
Q
Q
2244
Q
3011
1822
3540
2546
1541
3181
2288
1384
2816
2026
1226
2583
1858
1125
2416
1738
1052
2288
1645
996
2184
1571
951
2098
1509
913
1963
1412
854
1858
1336
809
1774
1276
772
1704
1226
742
1645
1183
716
1146
694
Q
Q
3071
Q
Q
2495
Q
3348
2026
3936
2831
1713
3536
2544
1539
3131
2252
1363
2873
2066
1250
2687
1932
1169
2544
1829
1107
2429
1747
1057
2333
1978
1016
2182
1569
950
2066
1486
899
1973
1419
859
1895
1363
825
1316
796
771
Q
Q
3902
Q
Q
3169
Q
4254
2574
5000
3596
2176
4493
3231
1956
3978
2861
1732
3649
2625
1588
3413
2455
1486
3231
2324
1407
3085
2219
1343
2964
2132
1290
2772
1994
1207
2625
1888
1142
2506
1802
1091
1732
1048
1012
Q
Q
4520
Q
Q
3671
Q
4928
2982
5792
4166
2521
5205
3743
2265
4609
3315
2006
4227
3040
1840
3954
2844
1721
3743
2692
1629
3574
2571
1556
3434
2470
1495
3211
2310
1398
3040
2187
1323
2088
1264
1214
Q
Q
5254
Q
Q
4268
Q
5728
3466
6733
4843
2931
6050
4351
2633
5357
3853
2332
4914
3534
2139
4596
3305
2000
4351
3129
1894
4155
2988
1808
3991
2871
1737
3733
2685
1625
2542
1538
1469
Q
Q
7379
Q
Q
5997
Q
8244
4868
9456
6801
4116
8496
6111
3698
7523
5411
3275
6901
4964
3004
6454
4642
2809
6111
4395
2660
5835
4196
2540
5606
4032
2440
3771
2282
2161
Q
Q
9040
Q
Q
7343
Q
9855
5964
11585 10409
8332 7487
5043 4531
9217
6629
4012
8455
6081
3680
7907
5687
3442
7487
5385
3259
7148
5141
3111
4939
2989
2796
Q
Q
Q
20298 18238 16150 14814 13855 13117 12525
Q
Q
17268 14599 13117 11615 10655 9965 9434 9008
15840 12866 10450 8835 7939 7029 6448 6031 5710 5452
8654
5238
4898
Q
Q
Q
29210 26245 23240 21318 19938 18876
Q
Q
24849 21008 18876 16714 15332 14340 13576 12963
22794 18514 15038 12714 11424 10116 9279 8678 8216 7845
7537
Q
Q
Q
34754 31228 27651 25365 23722
Q
Q
29566 24996 22460 19887 18243 17062 16154
27121 22029 17893 15128 13593 12036 11041 10326 9776
9334
Q
Q
Q
39581 35565 31492 28888
Q
Q
33672 28468 25579 22649 20777 19431
30888 25089 20378 17229 15481 13707 12574 11760 11134
Q
Q
Q
47032 42260
Q
Q
40010 33827 30394 26913
36702 29811 24214 20472 18395 16288 14941
Q
Q
Q
52651 47309
Q
Q
44790 37868 34025 30128
41087 33373 27107 22918 20592 18234 16726
Q
Q
Q
58246
Q
Q
49550 41892 37641
45453 36919 29988 25353 22780 20171
Q Load exceeds 25% of C rating, consult Rexnord.
Shaded ratings may require additional axial clearance and/or high speed temperature lubricant due to higher operating temperatures.
THEORETICAL BEARING L10 LIFE CALCULATION
While bearings are usually selected on the basis of capacity,
there are occasions when they are selected based on calculated
L10 life.The L10 life is defined as the number of revolutions (or
hours) that90% of a group of bearings will meet or exceed
before evidence of raceway spalling fatigue occurs. The L10 life
can be calculated using the following empirical formula:
1 X 10 6  C  10 3
L10 =
= life in hours
60 X RPM  Pe 
Where C = C Rating
Pe = Equivalent Radial Load or Req’d Radial Capacity
24 (1070)
The basic dynamic load ratings, C, in this catalog have been
increased significantly compared to previous values. Improved
surface characteristics have been produced primarily by
improving manufacturing and measuring techniques for the race
surfaces. Along with the capability to rotate under higher loads,
the static load ratings, C o, have also been increased.
With the larger load ratings it may be possible to use smaller
bearings (size code) for a given application. Caution is advised
in such cases to consider the strength of the shaft and housing –
especially when the applied load is not aimed directly into the
machined mounting surface.
SEAL SELECTION GUIDE
6000 Series
Seal Rating Guide
The choice of the seal for a mounted bearing is often the key to
successful bearing operation and long service life. This SEAL
SELECTION GUIDE incorporates years of Rexnord experience
against the wide variety of conditions encountered on actual
applications. Following the simple selection procedure outlined
can translate the benefits of that broad experience to individual
applications through the choice of the most effective seal.
Seal Rating
Clearance
Light
Contact
Heavy
Contact
Z
K
M
Viton
M
SHAFT POSTION
Horizontal Shaft
4
4
4
4
Vertical Shaft
1
3
4
4
OPERATING TEMPERATURE
Below -40°F
4
1
1
2
-40° to 0°F
4
3
3
4
0° to 250°F
4
4
4
4
+250° to +300°F
4
2
2
4
Over 300°F
4
0
0
2
SPEED
Equal to/Less than limit below
4
4
4
4
More than limit below
4
2
1
1
VIBRATION/SHOCK
Occasional - Mild
3
4
4
4
Occasional - Severe
2
4
4
4
Continuous - Mild
1
4
3
4
Continuous - Severe
0
4
3
4
ABRASIVE MATERIAL
Coarse - Over #10 Mesh
4
4
3
3
Small - #10 to #50 Mesh
3
4
4
4
Fine - #50 to #200 Mesh
1
3
4
4
Very fine - Under #200 Mesh
3
3
4
4
“Caking or buildup” (cement, etc.)
2
4
3
3
MOISTURE
Splash
2
3
4
4
Rain
2
3
4
4
Saturated Atmosphere
1
3
4
4
Flooding
0
1
3
3
Pressure Wash
0
1
4
4
FIBROUS MATERIAL
Short Fibers (lint, etc.)
1
3
4
4
Long Fibers (grass, etc.)
1
3
2
2
CHEMICAL
Acid Fumes and Liquids
1
1
1
4
Alkaline Fumes and Liquids
1
1
1
4
Application experiences indicate that special consideration should be given to the
addition of Auxiliary End Cap Seals in the shaded areas in the chart.
How to Use the Selection Guide
a. The appropriate seal for a given application may be selected by
comparing the job application conditions against those listed in
the SEAL RATING GUIDE on this page.
b. When more than one application condition is present, the most
appropriate seal may be selected based on prime sealing for the
most detrimental condition, and secondary consideration given
to the other application conditions.
c. The details of design, principle of operation, benefits and
limitations, as well as shaft size range are described as a further
aid to final selection.
d. Addition of auxiliary end caps will enhance the primary seal
performance shown in the chart.
Considerations in Addition to Seal Selection
Under certain adverse conditions, other changes should be
considered to achieve maximum bearing life:
a. High temperature lubricants where housing or ambient
temperatures exceed +200F.
b. Special greases for additional bearing protection where
excessive water, solvents or chemicals are present.
c. EP (extreme pressure) greases where high load, high shock
load, or continuous vibration is present.
d. Changes in amount of lubricant and cycles for relubrication
periods.
e. Readjustment of internal operating clearance of bearing where
extreme high or low temperature conditions exist.
Rating Code
43210-
Excellent - Best seal for conditions listed.
Good - Sealability is above average.
Fair - Seal performs under intermittent conditions.
Limited - Actual conditions must be known to evaluate sealability. Check “General
Characteristic Guide” Page 59 for construction as well as benefits and limitations
for further evaluation.
Not acceptable - Will not effectively perform seal functions. Contact Rexnord for
special assistance in the realm of materials and designs.
Seal Speed Limit Table H
Size Code
Z
(RPM)
Size Code
6
7
8
9
10
11
12
13
4050
3650
3300
2800
2400
2050
1850
1600
K
2800
2500
2300
1900
1700
1400
M
2500
2200
2000
1700
1400
1200
1100
1000
6
7
8
9
10
11
12
13
Refer to Seal Rating Guide shown above for speeds in excess of those listed in this table.
H Actual bearing speed limits are largely based upon the applied load and can be found on the Load Rating Table on Page 24.
(1070) 25
ADAPTER AUXILIARY END CAP DIMENSIONS
6000 Series
A
A
B
D
D
"A" Prefix
(Two Open Caps)
Example: AMA6215
G
"B" Prefix
(1 Open 1 Closed Caps)
Example: BMA6215
C
Gasket
Thickness
C
B
D
D
"A" Prefix
(One Open Cap)
Example: MA6215A
E
"B" Prefix
( One Closed Caps)
Example: MA6215B
F
V-Ring Seal Detail
6000 Series Adapter Mount Auxiliary End Cap Dimensions
Cast Iron Auxiliary End Caps
Bearing
Number
Size
Code
6115
6203
6206
6207
Fixed Bearings Only
Floating (Expansion) ZAFS Bearings Only Floating (Expansion) ZPS, ZFS Bearings Only
6
A
5-7/8
B
2-9/16
C
2-15/16
D
1-23/32
A
6-1/4
B
2-11/16
C
3-1/8
D
1-29/32
A
6-1/2
B
2-13/16
C
3-1/4
D
1-29/32
7
6-1/16
2-5/8
3-1/32
1-3/4
6-7/16
2-25/32
3-7/32
1-15/16
6-5/8
2-7/8
3-5/16
1-15/16
8
6-11/16
3-1/32
3-11/32
2-1/32
7-3/16
3-5/32
3-19/32
2-9/32
7-7/16
3-9/32
3-23/32
2-9/32
9
7-1/4
3-1/16
3-5/8
2-1/16
7-3/4
3-7/16
3-7/8
2-5/16
8
3-9/16
4
2-5/16
10
7-15/16
3-7/32
3-31/32
2-1/4
8-7/16
3-25/32
4-7/32
2-1/2
8-11/16
3-29/32
4-11/32
2-1/2
11
9
3-15/16
4-1/2
2-7/16
9-1/2
4-3/16
4-3/4
2-11/16
9-3/4
4-5/16
4-7/8
2-11/16
12
9-7/16
4-5/32
4-23/32
2-19/32
10-3/16
4-21/32
5-3/32
2-31/32
10-7/16
4-31/32
5-7/32
2-31/32
13
11-5/8
5-1/4
5-13/16
3-1/32
12-3/8
5-5/8
6-3/16
3-13/32
12-13/16
5-27/32
6-13/32
3-13/32
V-Ring Seal
E
F
3/8
3/16
7/16
1/4
9/16
5/16
Gasket
G
6211
6212
6215
6303
6307
6311
6315
6403Y
6407Y
6415
***AUXILIARY END CAP KITS 6000 SERIES ADAPTER
AS96215
A
CAP
STYLE
HOUSING
TYPE
SIZE
CODE
SERIES
3/16
S
9
6
215
A - Open Cap
B -Closed Cap
S - Floating Type
* - Leave Blank for Fixed Type
6 -13 Bearing Size Code From Above
6 - For Type “A” Open Caps
6000 For Type “B” Closed Caps
215 - 2-15/16” Last 2 Digits In 16th Of An Inch
SHAFT
DIAMETER * - Not Required For Closed Cap Styles
*** IN ADDITION, PRE-DRILLED AND TAP HOUSINGS ARE REQUIRED.
26 (1070)
®
REXNORD SHURLOK INSTALLATION TOOLS
Rexnord is pleased to offer a quick installation tool for the
SHâRLOK bearing. This tool is designed as a supplement to the
spanner wrench or drift pin method. The installation tool can be
attached to a half inch drive ratchet, torque wrench, or breaker
bar which can be used as a lever arm. Simply fit the installation
tool over the locknut by placing the tool’s teeth into the locknut
slots. The tool’s unique shape allows it to be used from the side
or the top of the bearing (see Figs. 1 and 2). To order, refer to
the table below for the installation tool that fits your shaft size.
Part Number
Size Code
Shaft Sizes
105-90420-11
6
1-15/16”
105-90420-21
7
2-3/16”
105-90420-31
8
2-3/8”, 2-7/16”
105-90420-41
9
2-11/16”, 2-3/4”, 2-15/16”
105-90420-51
10
3-3/16’, 3-7/16”
105-90420-61
11
3-11/16”, 3-15/16”
105-90420-71
12
4-3/16”, 4-7/16”
105-90420-81
13
4-15/16”
Figure 1
Figure 2
(1070) 27
World Class Customer Service
For more than 100 years, the dedicated people of Rexnord
have delivered excellence in quality and service to our
customers around the globe. Rexnord is a trusted name when
it comes to providing skillfully engineered products that
improve productivity and efficiency for industrial applications
worldwide. We are committed to exceeding customer
expectations in every area of our business: product design,
application engineering, operations, and customer service.
Because of our customer focus, we are able to thoroughly
understand the needs of your business and have the resources
available to work closely with you to reduce maintenance
costs, eliminate redundant inventories and prevent equipment
down time.
Rexnord represents the most comprehensive portfolio of power
transmission and conveying components in the world with the
brands you know and trust.
Rexnord is a registered trademark of Rexnord Industries, LLC. Shurlok and Spyglass are trademarks of
Rexnord. Imperial is a trademark of Baldor-Dodge. Dodge and SKF are trademarks of their respective
companies. All rights reserved.
WORLDWIDE CUSTOMER SERVICE
AUSTRALIA
Rexnord Australia Pty. Ltd.
Picton, New South Wales
Phone: 61-2-4677-3811
Fax: 61-2-4677-3812
CHINA
Rexnord China
Shanghai, China
Phone: 86-21-62701942
Fax: 86-21-62701943
BRAZIL
Rexnord Correntes Ltda.
Sao Leopoldo - RS
Phone: 55-51-579-8022
Fax: 55-51-579-8029
EUROPE
Rexnord NV/SA
Mechelen, Belgium
Phone: 32-15-.443811
Fax: 32-15-443860
CANADA
Rexnord Canada Ltd.
Scarborough, Ontario
Phone: 1-416-297-6868
Fax: 1-416-297-6873
Rexnord Kette GmbH
Betzdorf, Germany
Phone: 49-2741-2840
Fax: 49-2741-284-385
Rexnord Industries, LLC, 7601 Rockville Road, Indianapolis, IN 46214-3102 USA
Phone: 317-273-5500
Fax: 317-273-5620
© 2007 Rexnord Industries LLC
LATIN AMERICA
Rexnord International, Inc.
Milwaukee, Wisconsin
Phone: 1-414-643-2366
Fax: 1-414-643-3222
E-mail: [email protected]
MEXICO
Mecanica Falk S.A. de C.V.
Mexico, D.F. 02300
Phone: 52-55-9140-3500
Fax: 52-55-9140-3550
SINGAPORE
Rexnord International, Inc.
Singapore City, Singapore
Phone: 65-6338-5622
Fax: 65-6338-5422
UNITED STATES
Customer Service
Phone: 1-866-REXNORD
(1-866-739-6673)
Fax: 1-614-675-1898
E-mail: rexnordcs(state)@rexnord.com
Example: [email protected]
ALL COUNTRIES NOT LISTED
Rexnord International
Milwaukee, Wisconsin
Phone: 1-414-643-2366
Fax: 1-414-643-3222
E-mail: [email protected]
1070
09/2007 Delzer Litho Printed in USA

Rexnord® 6000 Series SHURLOK™ Adapter Mount Roller Bearings

Transcription

Similar documents