EXOFLEX

EXOFLEX
Why It’s Worth a Look
• Engineered for performance fabrics
• Ultimate stretch and recovery
• Matte finish
• Patterns offer differentiating graphic/market relevant aesthetic
• Soft hand feel
• Abrasion resistant
• Withstands high heat wash
• Water resistant
EXOFLEX
/ CORE COLORS
Snow
Grey
Ash
Gold
Pantone
11-0601 TPX
Pantone
17-1501 TPX
Pantone
19-4104 TPX
Pantone
871C
Navy
Black
Pitch
Red
Pantone
19-4024 TPX
Pantone
19-0508 TPX
Pantone
19-4006 TPX
Pantone
18-1763 TPX
Orange
Electric
Metallic Silver
Metallic Gold
Pantone
17-1464 TPX
Pantone
285C
Pantone
877C
Pantone
871C
EXO / 1
TECHNICAL INFORMATION
EXOFLEX
EXO3900
EXO5231
MATERIAL
Thermoplastic Polyurethane
Thermoplastic Polyurethane
STOCKED WIDTH
475 mm
1422 mm
GAUGE
75 µm (.003”)
75 µm (.003”)
WEIGHT
90 g/m2
150 g/m2
CARRIER
Release Paper
Matte Release Paper
ADHESIVE SOFTENING POINT
102°C (216°F)
102°C (216°F)
ADHESIVE MELT FLOW INDEX
20 dg/min at 150°C / 2.16 kg
20 dg/min at 150°C / 2.16 kg
ABRASION RESISTANCE2
Excellent
Excellent
SERVICE TEMPERATURE
−40°C to 75°C (−40°F to 167°F)
−40°C to 75°C (−40°F to 167°F)
WASH
Excellent up to 60°C
Excellent up to 60°C
HAND
Soft
Soft
TEMPERATURE
130°C to 155°C
130°C to 155°C
TIME
15 to 30 seconds
15 to 30 seconds
PRESSURE
2.8 to 5.5 bar (40 to 80 psi)
2.8 to 5.5 bar (40 to 80 psi)
TEMPERATURE
200°C to 250°C
200°C to 250°C
SPEED
1.5 to 2.0 m/min
1.5 to 2.0 m/min
PRESSURE
1.0 bar (14.5 psi)
1.0 bar (14.5 psi)
INITIAL BONDING CONDITIONS3
FLAT PRESS
CONTINUOUS BONDING MACHINE
Only available in Black, Pitch, Grey and Snow.
Taber Test ASTM 3884
3
Recommended bonding conditions will vary between different machinery and fabrics. The recommended conditions stated are a starting point only. Optimal
bonding conditions should be established by the factory of the specific application.
1
2
NOTE: Seller hereby excludes any express warranties and the implied warranties of merchantability and fitness for a particular purpose. The following is
made in lieu of any such “warranties.” Bemis Associates, Inc. believes the information and specification supplied are reliable, but does not guarantee that
any results shown or claimed will be obtained. Before using, the user shall determine the suitability and fitness of the product for its intended use. The user
assumes all risks and liability whatever in connection with its own tests and use. Neither seller nor manufacturer shall be liable for any injury, loss or damage,
direct or consequential, arising out of the use, or misuse or inability to use this product.
EXOFLEX
/ CORE COLORS
Rose Pearl Essence
Pink Pearl Essence
Bright Purple Pearl Essence
Bright Blue Pearl Essence
Bright Green Pearl Essence
Bright Gold Pearl Essence
Nude Pearl Essence
Carbon Pearl Essence
Gold Pearl Essence
Rusty Red Pearl Essence
EXO / 2
EXOFLEX
/ CORE PATTERNS
Stainless Silver Flax
(Silver/Silver)
Silver Flax (Silver/Black)
Gold Flax (Gold/Gold)
Navy Flax (Navy/Navy)
Pantone
877C/19-0508
Pantone
871C/871C
Pantone
19-4024 TPX/19-4024 TPX
Black Flax (Black/Black)
Gold Desco (Gold/Gold)
Desco (Silver/Black)
Pantone
19-0508 TPX/19-0508 TPX
Pantone
871C/871C
Pantone
877C/19-0508 TPX
Pantone
877C/877C
EXO / 3
EXOFLEX
/ CORE PATTERNS
Silver Lodi Dotti (Silver/Silver)
Gold Lodi Dotti (Gold/Gold)
Pitch Lodi Dotti (Pitch/Pitch)
Pitch Cobra (Pitch/Pitch)
Pantone
877C/877C
Pantone
871C/871C
Pantone
19-4006 TPX/19-4006 TPX
Pantone
19-4006 TPX/19-4006 TPX
Billie Jean (Denim/Navy)
Manila (Pitch/Pitch)
Pantone
18-4320 TPX/19-4024 TPX
Pantone
19-4006 TPX/19-4006 TPX
EXO / 4
TECHNICAL INFORMATION
EXOFLEX
EXO3900
MATERIAL
Thermoplastic Polyurethane
STOCKED WIDTH
475 mm
GAUGE
75 µm (.003”)
WEIGHT
90 g/m2
CARRIER
Release Paper
ADHESIVE SOFTENING POINT
102°C (216°F)
ADHESIVE MELT FLOW INDEX
20 dg/min at 150°C / 2.16 kg
ABRASION RESISTANCE1
Excellent
SERVICE TEMPERATURE
−40°C to 75°C (−40°F to 167°F)
WASH
Excellent up to 60°C
HAND
Soft
INITIAL BONDING CONDITIONS2
FLAT PRESS
TEMPERATURE
130°C to 155°C
TIME
15 to 30 seconds
PRESSURE
2.8 to 5.5 bar (40 to 80 psi)
CONTINUOUS BONDING MACHINE
TEMPERATURE
200°C to 250°C
SPEED
1.5 to 2.0 m/min
PRESSURE
1.0 bar (14.5 psi)
Taber Test ASTM 3884
Recommended bonding conditions will vary between different machinery and fabrics. The recommended conditions stated are a starting point only. Optimal
bonding conditions should be established by the factory of the specific application.
1
2
NOTE: Seller hereby excludes any express warranties and the implied warranties of merchantability and fitness for a particular purpose. The following is
made in lieu of any such “warranties.” Bemis Associates, Inc. believes the information and specification supplied are reliable, but does not guarantee that
any results shown or claimed will be obtained. Before using, the user shall determine the suitability and fitness of the product for its intended use. The user
assumes all risks and liability whatever in connection with its own tests and use. Neither seller nor manufacturer shall be liable for any injury, loss or damage,
direct or consequential, arising out of the use, or misuse or inability to use this product.