The Sunshine Coast`s Pottery and Ceramic Supplies

Transcription

The Sunshine Coast’s Pottery and Ceramic Supplies Specialists
The Clay Shed
Catalogue
Effective March 2016
Trading Hours
2/24 Hi Tech Drive, Kunda Park QLD 4556
Ph: 07 5476 5977 Fax: 07 5476 6061
Email: [email protected]
Mon-Thur:
Fri:
Sat:
Closed:
8:30am - 5pm
8:30am - 1:30pm
8:30am - 12pm
Sundays & Public Holidays
About Us
The Clay Shed stocks over 50 clay bodies and an extensive
range of glazes, colours, tools, brushes, refractory materials
and studio equipment.
Cameron Hess and Tania Matheson have been owner/
operators of the Clay Shed since 2009.
Cameron is a second generation potter with over 20 years
experience, acquiring skills and knowledge during his early
years as a production potter at Yarra Glen Pottery in
Brisbane, and later across many parts of Queensland,
including Byfield and Montville, and Northern New South
Wales.
Tania is involved in many of the operational aspects of The Clay Shed and enjoys
dabbling in clay play in her spare time.
Everything for the beginner through to the experienced potter.
The Clay Shed offers it all!
How To Find Us
Maroochydore
Bruce Highway
&
Nambour
The Clay Shed
The Clay Shed
ABN 31 481 281 072
2/24 Hi Tech Drive, Kunda Park QLD 4556
Ph: 07 5476 5977 Fax: 07 5476 6061
Email: [email protected]
Web: www.clayshed.com.au
2
The Clay Shed Catalogue effective March 2016
Table of Contents
Services
Prepared Clay Bodies
4
5-6
Air Hardening Clay
7
Casting Slips & Powders
7
Raw Materials
Materials & Frits
8-9
10
Colours
11 - 14
Transfer Papers
15 - 17
Clear Glazes
18
Glazes
19 - 23
Lustres
24
Brushes
Slip Trailers
25 - 26
27
MudTools
28 - 29
Tools & Miscellaneous
30 - 37
Menders & Enhancers
36
Studio Equipment
38 - 40
Kiln & Pizza Oven Building Materials
41 - 42
Cones & Stilts
43
Bisqueware
44
Publications
45
DIY Woodfired Pizza Ovens
46
TERMS & CONDITIONS
All prices in this catalogue include 10% GST and are effective from March 2016. While correct at
time of publication prices are subject to change without notice. For items not listed in this catalogue
please note that a 20% deposit will be required upon ordering.
Mail and freight orders are accepted. Please contact The Clay Shed prior to ordering should pricing
confirmation be required. Freight costs are not fixed, and are based on the order’s size and weight,
and fluctuating fuel levies.
Goods will only be accepted for return if prior arrangement has been obtained within 7 days of receipt
of goods. Title and ownership of goods does not pass to the purchaser until payment in full has been
made. Until such time goods remain the property of The Clay Shed.
All materials should be sampled for their suitability prior to use. It is important to prove their effectiveness under the particular conditions that they are to be subjected to.
Material Safety Data Sheets are available upon request.
3
SERVICES
Firing Service for Pottery
Love making pottery but don’t have a
kiln? No problem, use ours!
We offer:




Bisque Firing 1020°C
Earthenware Glaze Firing 1100°C
Midfire Glaze Firing 1200°C
Stoneware Glaze Firing 1280°C
See our website for terms & conditions or
contact The Clay Shed for the current firing
schedule.
STUDIO EQUIPMENT
FOR HIRE
POTTERY WHEELS
AND
SLAB ROLLERS
$25 PER WEEK or $60 PER MONTH
Contact The Clay Shed for bookings.
For details call
Jackie 0438 450 349
4
PREPARED CLAY BODIES
FEENEYS (12.5kg)
FTC
CLAY BODY
Terracotta
Mesh
CODE
Feeney’s clays should be bisque fired at not less than 1020°C.
Do not bisque below this temperature as cracking and/or bloating may occur later during the glaze firing.
Texture
1-3
packs
4 - 10
packs
11 - 39
packs
40 - 79
packs
80+
packs
Firing Range
30
M
13.65
13.20
12.75
12.30
11.85
1060—1160°C
13.80
13.35
12.90
12.45
11.95
FTCPC Terracotta Paper Clay
FHBTC Hand Building Terracotta
8
M/C
16.60
16.05
15.50
14.95
14.40
1060—1160°C
FHB
Hand Building
14
M
16.40
15.85
15.30
14.75
14.20
1020—1280°C
FBRS
Buff Raku—Sand
14
M/C
16.60
16.05
15.50
14.95
14.40
1000—1100°C
FBRT
Buff Raku—Trachite
14
M/C
16.50
15.95
15.40
14.85
14.30
1000—1280°C
FRR
Red Raku
14
M/C
15.50
15.00
14.50
13.95
13.45
1060—1160°C
FRG
Raku Gold
14
M
14.65
14.15
13.65
13.20
12.70
800—1300°C
FWR
White Raku
30
M
15.50
15.00
14.50
13.95
13.45
1000—1280°C
15.55
15.05
14.55
14.00
13.50
FWRPC White Raku Paper Clay
FFB
Fine Blend
30
M
16.50
15.95
15.40
14.85
14.30
1000—1280°C
FWSC
White School Clay
14
M
15.20
14.70
14.15
13.65
13.15
1000—1280°C
FRM
Red Midfire
14
M
14.30
13.85
13.35
12.90
12.40
1060—1200°C
FBS
Buff Stoneware
14
M
16.50
15.95
15.40
14.85
14.30
1000—1280°C
FDS
Dark Stoneware
14
M
16.50
15.95
15.40
14.85
14.30
1000—1280°C
FRS
Red Stoneware
14
M
16.50
15.95
15.40
14.85
14.30
1000—1280°C
WALKERS (10kg)
CODE
CLAY BODY
Mesh
1-3
packs
4 - 10
packs
11 - 49 50 - 99
packs packs
100+
packs
Firing Range
WIP
Imperial Porcelain
BM/FP
44.00
42.55
41.10
39.60
38.15
1200—1300°C
WSWP
Superior White Porcelain
BM/FP
29.70
28.70
27.70
26.75
25.75
1280—1300°C
WFWS
Feeney’s White Stoneware
120#
19.25
18.60
18.00
17.35
16.70
1240—1300°C
W10S
No. 10 Stoneware
120#
19.60
18.95
18.30
17.65
17.00
1250—1300°C
WPB103
PB103 Fine White Stoneware
120#
18.95
18.30
17.65
17.05
16.40
1260—1300°C
WPB103PC
PB103 Fine White Stoneware
Paper Clay
120#
20.70
20.00
19.30
18.65
17.95
1260—1300°C
WSSW
Special Stoneware
60#
16.95
16.40
15.80
15.25
14.70
1260—1300°C
WWMF
White Midfire
80#
23.10
22.35
21.60
20.80
20.05
1160—1260°C
WSES
School Earthenware/ Stoneware
30#
16.30
15.75
15.20
14.65
14.10
1000—1280°C
WWHB
White Handbuilding
30#
17.85
17.25
16.65
16.05
15.45
1080—1300°C
WWE
White Earthenware
80#
19.25
18.60
18.00
17.35
16.70
1060—1250°C
BENNETTS (15kg)
CODE
BTC
effective 1st June 2016
CLAY BODY
Terracotta
1-3
packs
4 - 10
packs
11-32
packs
33-65
packs
66+
packs
Firing Range
$19.90
$19.20
$18.55
$17.90
$17.25
1000—1100°C
5
PREPARED CLAY BODIES
CLAYWORKS (10kg)
CLAY BODY
Mesh
CODE
1-3
packs
4 - 10
packs
11 - 49 50 - 99
packs packs
100+
packs
Firing Range
CWSI
Les Blakeborough Southern Ice
(also available as Paper Clay)
120# $46.40 $44.85
$43.30 $41.75
$40.20
1260—1300°C
CWJB1
Fine Porcelain Body—JB1
120# $23.25 $22.50
$21.70 $20.95
$20.15
1255—1300°C
CWTMK Porcelain Type Body - TMK
120# $21.45 $20.70
$20.00 $19.30
$18.60
1270—1310°C
CWSLGH Stoneware—LGH
60#
$18.20 $17.60
$17.00 $16.40
$15.80
1270—1310°C
CWSRGH Stoneware—RGH
60#
$19.55 $18.90
$18.25 $17.60
$16.95
1270—1310°C
CWSYG
Stoneware—YG
30#
$18.70 $18.05
$17.45 $16.80
$16.20
1260—1320°C
CWJB3
Fine White Stoneware—JB3
120# $19.30 $18.65
$18.00 $17.40
$16.75
1270—1300°C
CWSC
Sculptural - Coarse
16#
$20.60 $19.90
$19.20 $18.50
$17.85
1100—1310°C
CWSW
Sculptural - Warm
30#
$20.95 $20.25
$19.55 $18.85
$18.15
1270—1310°C
CWSF
Sculptural - Fine
30#
$20.40 $19.70
$19.05 $18.35
$17.70
1100 - 1310°C
CWCI
Cool Ice Translucent Porcelain
120# $47.85 $46.25
$44.65 $43.05
$41.45
1180—1240°C
CWC6W Cone 6 White 120#
120# $22.20 $21.45
$20.70 $20.00
$19.25
1180—1240°C
CWMFQ Mid Fire Quartz—MFQ
120# $22.95 $22.15
$21.40 $20.65
$19.90
1140—1200°C
CWSWE
Earthenware/ Stoneware—SWE
120# $18.25 $17.65
$17.00 $16.40
$15.80
1050—1270°C
CWTWE
White Earthenware—TWE
120# $21.10 $20.40
$19.70 $19.00
$18.30
1100—1140°C
CWCTC
Fine Throwing Terracotta
60#
$21.45 $20.75
$20.00 $19.30
$18.60
1100—1140°C
Mesh
1-3
packs
4 - 10
packs
11 - 39 40 - 79
packs packs
80+
packs
Firing Range
60#
$25.30 $24.45
$23.60 $22.75
$21.90
To 1285°C
KEANES (12.5kg)
CODE
CLAY BODY
KIS
Ironstone
KWR
White Raku
$24.20 $23.35
$22.55 $21.75
$20.95
1000—1300°C
KSK
Special K
$27.40 $26.50
$25.55 $24.65
$23.75
1000—1300°C
KLP
Lumina Porcelain
$46.05 $44.55
$43.00 $41.45
$39.95
To 1300°C
KLM
Lumina Mid-fire Porcelain
$46.05 $44.55
$43.00 $41.45
$39.95
To 1240°C
BLACKWATTLE PAPERCLAY (10kg)
CLAY BODY
Texture
CODE
Paper clay should be bisque fired to at least 1050°C and should not be raw glazed
1-3
packs
4 - 10
packs
11 - 49 50 - 99
packs packs
100+
packs
Firing Range
BWPP
Porcelain Prestige
Fine
$23.15 $22.40
$21.65 $20.85
$20.10
1260—1280°C
BWWS
White Stoneware
Fine
$20.20 $19.55
$18.85 $18.20
$17.50
1260—1280°C
BWWGS
White Grogged Stoneware
Med $20.20 $19.55
$18.85 $18.20
$17.50
1050—1280°C
BWWE
White Earthenware
$19.45 $18.80
$18.15 $17.50
$16.85
1050—1150°C
BWBTC
Buff Terracotta
Med $19.45 $18.80
$18.15 $17.50
$16.85
1050—1150°C
BWP
Porcelain Prestige
(standard; not paper clay)
Fine
$20.25 $19.50
$18.80
1260—1280°C
6
$21.70 $20.95
SLIPS & POWDERS
SLIPS
CODE
SLIP
10L Bucket
Bucket
Total
No
Exchange
Bucket
Deposit
Firing Range
WALKERS
W10SS
No. 10 Stoneware
49.10
7.00
56.10
1260—1300°C
WWMS
White Midfire
60.85
7.00
67.85
1160—1260°C
49.40
7.00
56.40
1000—1100°C
CWWSS White Porcelain
56.80
N/A
N/A
1260—1300°C
CWWES White Earthenware
51.00
7.00
58.00
1000—1180°C
CWWTS Terracotta
53.85
7.00
60.85
1000—1100°C
1—19 Bags
20 + Bags
Firing Range
WAUWS Auscraft Ultra White
CLAYWORKS
POWDERS
CODE
POWDER
WALKERS
W10SP
No. 10 Stoneware (20kg)
37.10
35.65
1260—1300°C
WAUWP
Auscraft Ultra White (25kg)
42.55
40.95
1000—1100°C
WWMP
White Midfire
68.30
65.65
1160—1260°C
CLAYWORKS
CWPWE
Premium White Earthenware
44.30
42.60
CWTCP
Terracotta (6 bag mix only)
43.90
N/A
1000—1100°C
CWJB1P5
Fine Porcelain (JB1) 5kg
19.70
N/A
1255—1300°C
60.80
N/A
1255—1300°C
CWJB1P25 Fine Porcelain (JB1) 25kg
NOT LISTED?
Please contact us should the clay body, slip or powder you are looking for not be listed as
special orders may be arranged.
Please allow 2-4 weeks for availability of special orders.
Sun Clay
Air hardening clay—no need for firing—dries hard
Safe, multi-purpose and economical.
throwing, sculpting and hobby projects.
Great for modelling,
Dries leather hard in 24 hours and rock hard within several days
(actual drying time varies with temperature, humidity and thickness of clay). Decorate with acrylic paints. Must be sealed with a
commercial water sealant to waterproof.
Available in White
1kg $5.95
2kg $9.50
5kg $15.90
10kg $27.65
7
RAW MATERIALS
CODE
RAW MATERIAL
25g
50g
100g
250g
500g
1kg
5kg
Bag
As mineral properties can change from batch to batch,
it is advisable to carry out glaze tests prior to mixing large amounts of glaze.
AC100 Alumina Calcined 100
-
-
-
AC300 Alumina Calcined 300
-
3.70
6.70
20.20
75.90 (25kg)
Prices available upon request
AH
Alumina Hydrate
-
-
-
-
4.55
7.55
30.05
112.70 (25kg)
BCFX
Ball Clay FX
-
-
-
-
-
2.35
9.25
34.60 (25kg)
BC
Barium Carbonate—Fine
-
-
-
-
6.90
11.50
46.10
172.80 (25kg)
BW
Bentonite (Wyoming)
-
-
-
-
-
3.75
14.95
56.10 (25kg)
BAN
Bone Ash—Natural
BAS
Bone Ash—Synthetic
-
-
-
9.05
15.50
25.80 103.20
387.00 (25kg)
B
Borax
-
-
-
-
9.35
17.00
63.75
276.05 (25kg)
CO20
Calcite - Omya Carb 20 (Whiting)
-
-
-
-
2.10
4.85
18.05 (25kg)
CCC
Calcium Chloride Flakes
-
-
-
6.00
10.00
15.95
59.70
-
CCE2
China Clay—Eckalite 2 (Kaolin)
-
-
-
-
-
2.90
10.45
39.20 (25kg)
CHO
Chrome Oxide
-
4.45
7.35
14.70
22.00
CCBBR Clay Ceram (replaces CrestaBB)
-
-
-
-
-
3.25
10.75
40.20 (25kg)
CMC
CMC Tylose—aids glaze adhesion
-
-
-
15.70
25.10
37.60
-
-
CC
Cobalt Carbonate
5.80
11.35
17.95
38.45
64.05 102.45 384.15
CO
Cobalt Oxide
12.50
20.90
35.65
71.30 112.00 162.95
COL
Colemanite
-
-
-
-
3.30
5.50
COC
Copper Carbonate
-
-
8.90
16.90
27.95
44.70 167.45
-
COB
Copper Oxide—Black
-
-
6.80
14.55
24.15
38.65 144.90
-
CS
Cornish Stone (Synthetic)
-
-
-
-
6.00
8.85
31.65
110.75 (25kg)
CF
Crack Filler (mends cracks in b/ware)
-
-
-
7.70
12.80
20.45
76.60
-
CRYO
Cryolite (Synthetic)
-
-
-
-
9.10
15.10
60.25
225.90 (25kg)
DL
Dolomite (Local)
-
-
-
-
-
1.95
10.80
40.50 (25kg)
EP
Egyptian Paste (Self glazing clay)
-
-
-
-
8.15
13.60
54.25
-
FP
Feldspar Potash
-
-
-
-
-
3.90
10.10
40.80 (25kg)
FS
Feldspar Soda
-
-
-
-
-
4.40
11.10
46.00 (25kg)
FCAS
Fire Clay—Air Separated
-
-
-
-
-
2.70
9.10
29.05 (25kg)
F
Fluorspar
-
-
-
-
-
3.80
16.85
64.25 (25kg)
GB
Gerstley Borate
-
-
-
-
7.45
12.35
49.35 168.00 (22.7kg)
GCFC
Grog (Calcined Flint Clay) 0.5 - 1.0mm
-
-
-
-
3.50
13.90
52.05 (25kg)
IF
Illemenite Flour
-
-
-
-
-
4.50
15.30
57.00 (25kg)
IOB
Iron Oxide—Black
-
-
-
-
6.80
11.30
45.25
169.60 (25kg)
IOI
Iron Oxide—Red (Imported)
-
-
3.40
6.20
8.55
12.75
51.15
-
8
Prices available upon request
-
37.25 167.65
-
-
-
-
21.90
87.50 (25kg)
RAW MATERIALS
CODE
RAW MATERIAL
50g
100g
250g
500g
1kg
5kg
Bag
IOL
Iron Oxide—Red (Local)
-
-
-
2.25
3.80
13.20
51.55 (25kg)
IOYO
Iron Oxide—Yellow Ochre Synthetic
-
-
5.35
9.20
15.30
61.20
229.50 (25kg)
IOCM
Iron Oxide—Crocus Martis
LCF
Lithium Carbonate—Fine
-
9.20
20.20
34.55
MCH
Magnesium Carbonate—Heavy
-
-
-
MCL
Magnesium Carbonate—Light
-
-
MC
Manganese Carbonate
-
MD
Manganese Dioxide
MCK
Prices & availability upon request
57.65 218.80
863.70 (25kg)
-
3.60
8.85
27.75 (25kg)
-
14.50
24.10
96.40
433.80 (25kg)
-
4.90
8.15
13.05
-
-
-
-
-
3.05
5.30
18.85
76.65 (25kg)
Molochite-Calcined Kaolin
-
-
-
-
12.20
35.95
148.80 (25kg)
NS
Nepheline Syenite
-
-
-
-
5.60
21.65
69.10 (25kg)
NO
Nickel Oxide
14.20
24.85
53.05
-
-
PL
Petalite
-
-
-
13.40
22.30
89.10
334.15 (25kg)
PC
Potassium Carbonate (Pearl Ash)
-
-
-
4.80
8.00
36.35
161.80 (25kg)
PP
Potters Plaster
-
-
-
-
-
8.70
26.05 (20kg)
RF
Rutile Flour
-
-
8.80
15.05
SS
Silica Sand
-
-
-
S60
Silica 60
-
-
S200
Silica 200
-
S350
Silica 350
SC
88.40 141.35
25.10 100.35
376.20 (25kg)
-
2.70
9.70
36.30 (25kg)
-
-
5.20
8.30
31.05 (25kg)
-
-
-
3.10
7.55
27.20 (25kg)
-
-
-
-
3.20
8.10
28.30 (25kg)
Silicon Carbide
-
-
9.80
16.30
26.05
97.70
-
SAD
Soda Ash—Dense
-
-
-
-
4.40
17.60
66.00 (25kg)
S
Spodumene
-
-
-
9.75
16.25
64.95
243.45 (25kg)
STC
Strontium Carbonate
-
5.50
11.35
19.95
36.25 135.90
T
Talc
-
-
-
-
3.20
12.75
47.70 (25kg)
TCC
Terracotta Concentrate
-
-
-
-
7.55
34.20
91.75 (25kg)
TO
Tin Oxide
6.50
11.40
25.95
46.90
76.65
-
-
TD
Titanium Dioxide
-
-
7.20
10.00
14.95
69.60
223.35 (25kg)
VP
Vanadium Pentoxide
11.75
20.70
35.25
60.50
99.00
-
-
W
Wollastonite
-
-
-
4.45
6.30
25.10
94.05 (25kg)
ZO
Zinc Oxide
-
-
-
9.15
15.20
60.80
228.00 (25kg)
ZF
Zircon Flour
-
-
-
3.10
5.00
22.55
134.95 (25kg)
ZS
Zircon Sand
-
-
-
3.20
5.30
18.50
112.20 (25kg)
ZSO
Zircon Silicate Opacifier
-
-
7.30
11.40
19.00
76.00
312.00 (25kg)
-
All materials should be sampled for their suitability prior
to use. It is important to prove their effectiveness under
WARNING: When handling raw materials be sure to wear the particular conditions that they are to be subjected to.
an Australian Standards Approved P3 (Toxic Protection
Grade) Dust Mask, protective apparel, safety glasses and gloves. MSDS are available upon request.
Denotes Poisonous Materials
9
MATERIALS & FRITS
FRITS
FRIT
NUMBER
DESCRIPTION
500g
$
1kg
$
5kg
$
25kg
$
3531
Replaces 4064, 4364
Lead Bisilicate glaze frit. Firing 950-1050°C.
14.65 24.40 97.60 366.00
4131
Replaces 4108, 4113,
4508, 3134
Medium to hard unleaded frit to produce clear glazes.
Firing 1050-1100°C.
8.20
14.05 58.50 233.90
4110
Replaces 3110
Unleaded high alkali glaze frit. Firing 980-1080°C.
8.35
14.30 59.45 237.75
4124
Replaces 3124
Lead free calcium borosilicate frit. Firing 1040-1100°C.
9.50
16.25 67.55 270.20
4171
Replaces 3271
Lead free calcium borosilicate frit. Firing 1040-1100°C.
9.80
16.85 70.05 280.10
4193
Replaces 938
Clear, hard barium borosilicate lead free frit.
Firing 1040-1100°C.
12.30 21.10 87.80 351.05
4101
Replaces 5301
High Alkaline Unleaded
7.75
14.10 61.20 227.20
4106
Replaces 2954, 4112
A very soft, leadless borax frit. Firing 1000-1060°C.
Insoluble Colemanite substitute.
8.55
15.95 65.65 243.80
MISCELLANEOUS MATERIALS
CODE
MATERIAL
500mL
1L
5L
CSL
Latex
12.50
22.70
105.55
CSBM
Brushing Medium
(Add to colours & powders for superior brushing)
7.80
11.65
40.10
CSPM
Painting Medium
8.10
12.30
45.40
CSS
Soft Soap
10.50
17.10
65.25
CSWR
Wax Resist
15.20
25.00
104.10
CSDS
Clay Shed Decorating Slip
3.99
6.60
23.95
CSSN
Sodium Silicate
5.55
9.10
32.75
CSD
Dispex N400
12.60
20.10
75.30
CODE
MATERIAL
500g
1kg
5kg
CSBW
Bat Wash
3.60
5.95
22.70
CSWP
Wax—Paraffin Pellets
(burn off resist)
7.80
13.00
52.00
10
COLOURS
CESCO COLOURS
 Cesco colours are intermixable (except No. 17 Orange)
 Suitable for most earthenware bodies
 Best results obtained by firing to 1100°C under Cesco Clear
Earthenware Gloss Glaze
 Most underglazes will fire to stoneware temperatures with
some loss of colour intensity
CODE
GROUP 1
FQ1
Arctic Blue
FQ2
Rose*
FQ3
Grey
FQ4
Puce*
FQ5
Forest Green
FQ6
Turtle Brown
FQ7
Amulet Green
FQ10
Reef Gold
FQ11
Cobalt Blue
FQ12
Ebony Black
FQ13
White
FQ14
Celeste
FQ15
Violet*
FQ16
Fawn
FQ17
Orange*
UNGLAZED WARE
1. Apply glaze (brushing, dipping, spraying) to bisqueware.
2. Brush on underglaze to unfired glaze surface.
3. Glaze fire.
FQ18
Blue Grey
FQ21
Jade
FQ22
Red Brown
Note: It may be necessary, under some conditions, to add from
5% to 20% clear glaze to the underglaze before use. It is recommended that trials be carried out to determine any additions
needed.
The clear glaze used should mature at the glaze firing temperature and be compatible with the base glaze.
FQ24
Flesh Pink*
FQ25
Chocolate Brown
FQ26
Maroon*
FQ27
Mint Green
FQ29
Purple*
SOME NOTES REGARDING THE SHELF LIFE
OF CESCO UNDERGLAZES
Cesco underglaze colours contain a binder system to allow easy
application. The binder will deteriorate with time. The shelf life
is affected by a number of factors but would normally be expected to be greater than two (2) years. Unfortunately once the
binder has deteriorated, it is not possible to safely restore its
properties.
CODE
(Colours marked * can burn out at stoneware temperatures)
 May be fired on greenware or bisque either under or over
glaze
See the full colour chart at
RECOMMENDED TECHNIQUES
www.clayshed.com.au
DECORATING
1. Apply the underglaze by brushing the dry clay ware with 1 to 3
coats.
2. Bisque fire.
3. Apply suitable clear glaze (brushing, dipping, spraying).
4. Glaze fire.
Note: If the undercoat is too thick, “crawling” may occur. No. 12
Ebony Black and No. 19 Royal Blue give best results when applied
thinly. Alternatively, underglazes may be applied to bisqueware,
but it is then preferable to use a brush-on clear glaze.
We recommend the following to ensure the maximum usable life
of Cesco underglazes:
 Always keep the container lid firmly screwed on.
 Stir underglazes only with a clean dry blade before use.
 If some underglaze is decanted into a working container, do
not return any excess to the original particularly if water has
been used.
 Purchase quantities of underglaze relevant to your usage rate.
GROUP 2
FQ9
Deep Blue
FQ20
Victoria Green
FQ23
Daffodil Yellow
FQ28
Nasturtium Orange
CODE
GROUP 3
FQ8
Brick Red
FQ19
Royal Blue
FQ30
Flame
FQ31
Hot Orange
CODE
FQ32
GROUP 4
Bright Red
100mL
500mL
14.00 55.75
100mL
500mL
1L
99.05
1L
16.30 62.65 110.45
100mL
500mL
1L
20.10 73.80 131.10
100mL
500mL
1L
28.70 118.85 213.75
FQ900
Cesco Trial Kit 6 Colours x 20ml (Amulet Green, Brick Red, Cobalt Blue, Ebony Black, Victoria Green, Daffodil Yellow)
28.45
FQ3100
Cesco Underglaze Set 32 Colours + Flux & Colour Extenders x 100ml
331.40
11
COLOURS
Brush On Underglazes for Greenware or Bisque
CODE
GROUP 1
100mL
500mL
1L
CODE
GROUP 2
100mL
500mL
1L
DU01
Wattle
13.60
54.15
95.95
DU14
Sky
15.30
61.70
107.60
DU06
Icing
13.60
54.15
95.95
DU23
Bluegum
15.30
61.70
107.60
DU07
Jacaranda*
13.60
54.15
95.95
DU24
Daintree
15.30
61.70
107.60
DU13
Pacific
13.60
54.15
95.95
CODE
DU15
Azure
13.60
54.15
95.95
DU02
Mango
19.50
80.50
139.85
DU18
Marine
13.60
54.15
95.95
DU05
Galah
19.50
80.50
139.85
DU19
Lagoon
13.60
54.15
95.95
DU09
Ozone *
19.50
80.50
139.85
DU20
Spearmint
13.60
54.15
95.95
DU11
Berry *
19.50
80.50
139.85
DU21
Lime
13.60
54.15
95.95
DU12
Flamingo *
19.50
80.50
139.85
DU22
Jungle
13.60
54.15
95.95
DU16
Aegean
19.50
80.50
139.85
DU25
Ochre
13.60
54.15
95.95
CODE
DU26
Cocoa
13.60
54.15
95.95
DU03
Papaya
21.50
85.30
153.25
DU27
Sepia
13.60
54.15
95.95
DU28
Licorice
21.50
85.30
153.25
DU30
Coconut
13.60
54.15
95.95
DU33
Iris
21.50
85.30
153.25
DU32
Citrus
13.60
54.15
95.95
DU42
Firecracker
21.50
85.30
153.25
DU34
Teddybear
13.60
54.15
95.95
CODE
GROUP 5
100mL
DU35
Skin
13.60
54.15
95.95
DU04
Watermelon
29.80
119.15
207.90
DU36
Cream
13.60
54.15
95.95
DU08
Mauve *
29.80
119.15
207.90
DU37
Butter
13.60
54.15
95.95
DUTK
Deco Trial Kit
DU40
Tuscany
13.60
54.15
95.95
GROUP 3
100mL
GROUP 4
500mL
100mL
1L
500mL
1L
500mL
1L
7 Colours x 15mL
32.60
(Wattle, Pacific, Azure, Lime Licorice, Coconut, Firecracker)
* Can burn out over 1250°C or give poor results if mixed together
UNDERGLAZE PENCILS
HINT
For an opaque finish,
apply first coat of underglaze watered down and
then apply 2-3 straight
coats in opposite directions.
www.clayshed.com.au
12
Lead Free; for shading, fine line
drawing or identification on ceramics
$21.90 each
CODE COLOUR Max. Firing Temp.
UPB
Black
1300°C
UPBL
Blue
1300°C
UPBR
Brown
1200°C
UPGR
Green
1300°C
UPR
Rose
1045°C
UPY
Yellow
1200°C
COLOURS
WALKER CERAMICS DESIGN COLOURS are a range of colours to be applied either under or over the glaze. Australian
made, lead free, liquid colour concentrates of the highest standard. This range has numerous
decorative applications, that give from opaque to translucent effects.
 Magnificent vibrancy on Earthenware
 25 ball milled colours—the STRONGEST ever developed
 Beautiful silky flow characteristics & they will not powder
www.clayshed.com.au
 Can be applied to Greenware or Bisque
 Perfect for Majolica
 All colours are completely intermixable within the range or with Walker’s range of Wunder Colours
 Ready to use & economise with Walker’s specialist Flux Extenders
CODE
COLOUR
50mL
100mL
500mL
CODE
COLOUR
FK1
Coral
FK6
Pacific Purple*
FK2
Tropical Lime
FK9
Anemone Red*
FK3
Starfish Blue
FK15
Squid Ink Black
FK4
Sand Dune
FK25
Fire Crab Red
FK5
Sunshine Yellow
FK8
Lobster Red
FK7
Sunset Orange
FK11
Lavender Bay*
FK10
Surf Spray White
FK18
Red Emperor
FK12
Deep Sea Green
FK13
Whitsunday Blue
FE100
Flux Extender
(for Earthenware)
FK14
Sea Foam Green
FE110
Colour Extender
(for Stoneware)
FK16
Dolphin Grey
FK17
Shell Pink
FK19
Kelp Green
FK20
Golden Sand
FK21
Cobalt Sea
FK22
Sea Lettuce
FK910 All 25 Colours x 50mL
FK23
Barnacle Brown
FK911 All 25 Colours x 100mL
FK24
Aquamarine
9.20
14.05
56.75
50mL
100mL
500mL
10.25
16.20
64.20
14.00
19.95
74.85
17.20
28.55
119.45
7.00
8.90
28.10
DESIGN COLOURS SETS
7 Colours + Flux Extender (20ml ea):
Sea Foam Green, Sunshine Yellow, Sea
FK900
Lettuce, Lobster Red, Surf Spray White,
Cobalt Sea, Shell Pink
28.35
215.20
312.30
(Colours marked * can burn out at stoneware temperatures)
POTTERS COLOURS Stains with amazing intensity, stability & brightness!
CODE
STAIN
25g
50g
100g
CODE
FW5020
Manganese Alumina Pink
FW5021
Intense Burgundy
4.50
7.50
12.00
FW5390
6.00
10.00
18.00
FW5401
FW5053
Pink
6.00
10.00
16.05
FW5108
Golden Brown
3.90
6.50
FW5109
Red Brown
3.90
FW5120
Intense Coral
FW5190
FW5202
25g
50g
100g
Intense Lavender
10.80
18.00
31.00
Intense Yellow
4.20
7.00
11.00
FW5463
Tin Vanadium Yellow
3.90
6.50
10.00
10.00
FW5601
Black (Cobalt Free)
7.20
12.00
20.00
6.50
10.00
FW5603
Grey
9.00
15.00
25.00
5.40
9.00
14.00
FW5605
Tin Blue Grey
7.80
13.00
22.00
Deep Brown
4.20
7.00
10.00
FW5674
Intense Black
8.25
15.00
25.00
Chrome Green
4.80
8.00
13.00
FW5700
White
3.00
5.00
7.00
FW5228
Blue Green
5.40
9.00
15.00
FW5803
Red
9.00
15.00
25.00
FW5239
Bright Green
5.95
9.90
16.50
FW5806
Bright Red (Cd.Zr.)
10.35
17.00
30.00
FW5301
Intense Cobalt Blue
9.65
16.05
26.50
FW5807
Deep Red (Cd.Zr.)
13.35
22.00
38.05
FW5309
Intense Sky Blue
6.00
10.00
16.05
FW5818
Intense Orange
9.65
16.05
26.50
FW5344
Intense Royal Blue
10.20
17.00
29.00
FW5827
Fire Engine Red
9.65
16.05
26.50
FW5377
Intense Bright Blue
9.00
15.00
25.00
3—5g of each colour
20.30
POTTERS COLOURS STAIN KIT
STAIN
250g, 500g & 1kg packs also available; prices upon request
13
COLOURS
A range of Opaque Underglazes
for the beginner, hobbyist and the
professional requiring high quality decorating colour.
Brings clay to life!
See the full colour chart
at www.clayshed.com.au
100ml
500ml
CODE
$11.50
$34.55
COLOUR
FF1
Bud Green
FF3
Spruce Green
WUNDER COLOURS SETS
FF5
Forest Green
FF900
FF11
Wisteria
FF14
Raspberry
FF910 All 24 Colours + Flux & Colour Extenders x 50mL each
161.60
FF17
Turquoise
FF911 All 24 Colours + Flux & Colour Extenders x 100mL each
226.55
FF22
Alice Blue
 Lead free, non-toxic, water-based, non-flammable; ready to use colours
FF24
Midnight Blue
 Suitable for stoneware and earthenware
FF27
Buttercup
 Developed to suit all skill levels and techniques
FF28
Chartreuse
FF29
Goldenrod
FF31
Seneca Brown
FF36
Flesh
 Apply to greenware or bisque
FF44
Snow White
 Beautiful silky flow characteristics – will not powder
FF48
Onyx Black
 Use colours directly from the bottle or dilute, applying two to three coats
FF50
Royal Purple
FF60
Dusky Pink
 Economize with Colour Extender
FF62
Tangerine
 Colour may be diluted as required with Brushing Medium, Flux Extender
FF63
Blue Green
FF64
Ming Blue
FF67
Heritage Green
FF68
Tabasco Red
FF69
Cayenne Red
FF70
Anzac Poppy Red
14
7 colours (FF3,FF17,FF27,FF48, FF60, FF62, FF69) + Flux & Colour
Extenders x 20ml each
18.90
 Completely intermixable within the range
 Compatible and intermixable with the Design Colours range
for a solid colour or one coat for translucent colour.
or water.
 Work will be food safe after glazing and firing.
50ml, 1L & 5L By pre-order only
Please allow 2-4 weeks for availability
TRANSFER PAPERS
Create beautiful patterns on pottery and ceramic with these transfer papers
applied directly onto raw clay, leather hard, greenware and bisque or even a glazed
surface before firing. (Firing Range 1100°C—1300°C)
Full Sheet $9.50
TB1
TB3
TS4
TB10
TB11
TPB17
TPB18
Half Sheet $4.85
TPB12
TPB14
TPB19
TPB21
TPB29
TPB27
TB6
TB5
TPP2
TPB30
TPP4
TB7
TB8
TPS15
TPB16
TPB22
TPB26
TPB31
TPP9
Designs available may not be limited to those shown. When ordering, don’t forget to
ask us if there is anything new! You can also check out our
facebook page for
announcements about new products!!
Full Sheet $18.75 Half Sheet $10.25
41cm x 31cm
TW1
TW3
TW4
TW6
Full Sheet $19.95
Half Sheet $10.95
TW5
15
TRANSFER PAPERS
55cm x 35cm
Cubic
Spiral
Red Paisley
Chrysanthemum
Cherry Blossum
Florentine
Daisy
Waving Grass
TPB13
Full Sheet $14.85
TPB20
TPC5
Full Sheet $13.75
Half Sheet $7.50
Full Sheet $17.25
Half Sheet $8.95
TPR23
TC1
TPC7
Full Sheet $31.55
Half Sheet $18.40
Bright Flowers
Mini Transfers (25cm x 18cm) $3.50ea
Full Sheet $11.95
TPR24
TO6 Cranes
Designer Flowers Red
Geometric (Blue or Black)
16
Butterflies (Green or Red)
Fish Spiral (Black)
TRANSFER PAPERS
37cm x 51cm
TB18GS
Flowers Small Green
TPD61R
Small Flower Red
TT031FYE
Sunflower Yellow
TB18RS
Flowers Small Red
TB18GL
Flowers Large Green
TB18RL
Flowers Large Red
TPD61
Small Flower Green
TP2Q
Pretty Red Flower
TP2QG
Pretty Green Flower
While stocks last
While stocks last
TP2E Q Design Red
TP2D
TB12O
Circles Orange
TP2K
Light Blue Mod Circles
TB16 Animals 1
TB17 Animals 2
TP2M
TP2L
TPD30
Red Flower Garden
Green Flower Garden
Cracked Flower Red
While stocks last
While stocks last
While stocks last
TB15O Fans Orange
TB15B Fans Black
TB15R Fans Red
While stocks last
TB15G Fans Green
TPD49 Green Shell
Full Sheet $8.75
30cm x 30cm
TO1 Geisha
TO2 Bamboo
TO3 Dragonfly TO4 Landscape TO5 BoysPlaying
TO7 Storks
17
CLEAR GLAZES
CESCO BRUSH ON GLAZES
CLEAR GLAZES
CODE
ITEM
500ml
1L
5L
10L
Firing Range
EQK5295
Clear (Low Firing)
Clear Raku
16.15
28.90
-
-
980—1080°C
EQB5381
Clear Super Gloss
Versatile clear super gloss with wider firing
range
11.05
20.00
-
-
1040—1120°C
EQB6101
Clear Gloss
Previously Walker Ceramics EC101
11.30
21.30
81.65
EQB5223
Clear Gloss
Long-standing standard clear glaze
11.05
20.00
-
-
1080—1100°C
EQS5600
Translucent Satin
Standard clear satin glaze
11.05
20.00
-
-
1080—1100°C
ERG2
Clear Transparent Base glaze (+2ppm; contains fritted lead)*
11.30
20.25
-
-
1080—1100°C
EQB5490
Clear Transparent Midfire transparent gloss
11.05
20.00
88.90
EQB6250
Clear Gloss
Clear gloss with wide firing range
11.50
21.65
-
-
1160—1280°C
ESA6255
Clear Gloss
Midfire clear gloss
11.00
19.75
-
-
1180—1220°C
ESB4914
Clear Gloss
High firing glaze to suit most stoneware bodies.
16.55
29.65 128.60 235.80 1260—1300°C
147.80 1060—1120°C
169.50 1180—1240°C
*NOTE: +2ppm glazes contain fritted lead and may yield in excess of 2 parts per million of soluble lead under certain conditions of application and firing. These glazes are NOT suitable for contact surfaces of food or beverage ware.
CLEAR GLAZES - POWDER
CODE
ITEM
GP271D
Ferro 271D
ETB6101
EVB6031
PROPERTIES
500g
1kg
5kg
25kg
Firing Range
Clear glaze with huge temperature range
8.80
14.65
58.45
219.05
1050—1250°C
Super Gloss
Lead free clear; can be taken over 1120°C
9.20
15.60
59.65
228.00
1060—1120°C
Gloss
Lead free, zinc free clear gloss stoneware
9.60
16.30
62.35
238.45
1260—1300°C
Pure Brilliance®
Brush-On Clear Glaze
500ml
1L
3.78L (U.S. Gal)
$14.30
$23.30
$67.85
How to Use
1. Mix clear glaze with palette knife.
2. Sponge Application: Dab a clean sponge into glaze and dab one coat over colours on
surface of bisque to cover. After the sponged coat has dried thoroughly, load glaze
brush with glaze and brush on two coats. Allow to dry between coats.
3. Brush Application: Load a glaze brush with glaze and apply two flowing coats. Let dry
between coats.
4. Let ware dry thoroughly. Set ware securely on clean, sharp stilts in kiln.
Fire to cone 06.
18
CESCO GLAZES
980—1080°C
CESCO EARTHENWARE GLOSS
1080—1100°C
These lower firing glazes will suit most Hobby bodies, for use either
over or under underglaze decoration.
CODE
ITEM
EQK5295
Clear (Low Firing)
EQK5296
White Opaque (majolica)
500ml $16.15
1L
$28.90
CODE
500ml $16.15
1L
$28.90
ITEM
EQG1042
Turquoise Blue
EQG3530
White Opaque
EQG4986
Oatmeal
EQG5261
Avocado
EQG5262
Oyster White
EQG52621
Oyster White Speckled
EQG5264
Honey
EQG5266
Grey Jade
EQG5278
Pumpkin
EQG5279
Forest Green
EQG5281
Copper Turquoise
CESCO RUTILE MATT 1040°C (+2ppm)*
EQG5282
Turquoise Green
This rutile gives an interesting speckled effect on either white or
terracotta clay.
EQG5285
Rockingham Brown
CODE
ITEM
EQG5286
Yellow Opaque
ERR5038
Green Gold
EQG5287
Dark Brown
ERR5039
Seadrift
EQG5292
Drake Neck Green
ERR5040
Walnut Brown
ERR5041
Steel Blue
EQG5294
Red Brown
ERR5042
Golden Tan
EQG5387
Pewter
ERR5043
Yellow Gold
EQG5389
Pink
ERR5136
Sand
EQG5394
Apple
EQG5400
Salmon Pink
EQG5414
Light Grey
EQG5467
Apricot
EQG5470
Tan
EQG5477
Twilight Blue
EQG5480
Honey Gold
CESCO CADMIUM
1000—1040°C (+2ppm)*
CODE
ITEM
ERC5128
Daffodil Yellow
ERC5129
Tangerine Orange
ERC5130
Signal Red
ERC5131
Flambe Red
ERC5133
Lime Green
ERC5154
Burnt Orange
500ml $24.65
1L
$42.25
500ml $16.55
1L
$28.90
CESCO RAKU
CESCO MATT 1040—1080°C
CODE
ITEM
EQS5028
White Satin
EQS5069
Celedon Satin
500ml $16.15
1L
$28.90
CESCO MATT
1040—1080°C (+2ppm)*
ITEM
500ml
1L
EQG5482
Mint Green
ERM6230
Blue Barium—matt
16.15
28.90
EQG5483
Caramel
ERS5163
Ebony—satin
16.55
29.65
EQG6164
Victoria Green (EC164)
ERS5165
Sand—satin
16.55
29.65
EQG6211
Aventurine (EC211)
CODE
19
CESCO GLAZES
1080—1100°C
CESCO GLOSS 1080—1100°C (+2ppm)*
500ml $16.70
1L
$29.90
CODE
500ml $16.15
1L
$28.90
ITEM
EQG5267
Burgundy
EQG5277
Purple
EQG5283
Royal Blue
EQG5284
Black
EQG5293
Raspberry
CODE
ITEM
ERG5106 Green (transparent)
CESCO GLOSS 1080—1100°C (+2ppm)*
500ml $16.70
1L
$29.90
CODE
1080—1100°C
500ml $24.25
1L
$40.35
CODE
ITEM
EQG5491
Hot Orange
EQG5492
Brick Red
ITEM
ERG5185
Crackle Goldene
ERG5186
Honey Flame
ERG5323
Silver
*NOTE:
+2ppm glazes contain fritted lead and may yield in excess of 2 parts per million of soluble lead under certain conditions of application and firing. These glazes are NOT suitable for contact surfaces of food or beverage ware.
New MIDFIRE Glazes
CESCO OPALENE GLOSS
1080—1120°C
Red Clay only.
These glazes break into opalescent
patterns and add interest to any
terra cotta piece.
500ml $16.15
1L
$28.90
CODE
ITEM
CESCO MIDFIRE GLOSS
1180—1220°C
ESA6255
Clear
500ml
1L
500ml $16.10
1L
$28.85
CODE
ITEM
Jade Blue
ESA6251
White
EQO5193
Opal White
ESA6260
Yellow
EQO5194
Mist Blue
ESA6261
Orange
EQO5195
Mist Grey
ESA6262
Red
EQO5197
Midnight Blue
ESA6263
Sky Blue
EQO5198
Peacock Blue
EQO5199
Mist Jade
ESA6264
Deep Blue
ESA6266
Celedon
ESA6267
Copper Green
ESA6268
Black
Mist Green
EQO5201
Plum
EQO6209
Sea Break Green
500ml $16.10
1L
$28.85
$11.00
$19.75
CODE
EQO5192
EQO5200
CESCO MIDFIRE MATT
1180—1220°C
ITEM
ESA6265
Camel
ESA6269
Charcoal
CESCO STONEWARE GLAZES
1260—1320°C
High firing glazes to suit most stoneware bodies.
500ml $16.55
1L
$29.65
CODE
ITEM
ESB4914
Clear Gloss
(also available in 5L & 10L)
ESG4915 White Opaque Gloss
PLEASE NOTE: Due to limited shelf life, selected glazes are only available to order. To avoid
lengthy delays, feel free to call, fax or email us your order prior to collection or delivery.
20
GLAZES
CESCO POOLING GLAZES (-2ppm)
1020—1100°C
ITEM
CODE
ITEM
ETP1
Diamond
ETP5272
Orange
ETP5167
Turquoise
ETP5273
Red
ETP5170
Aquamarine
EUP5263
Yellow*
ETP5174
Sapphire
ETP5175
Amethyst
ETP5178
Tourmaline
ETP5179
Emerald
ETP5274
Yellow
ETP5276
Purple
500g
1kg
* NOTE: Firing Temp.
$13.55
$21.65
500g
1kg
$17.05
$27.20
980°C
EUP5263 is a Cadmium +2ppm glaze containing
fritted lead and may yield in excess of 2 parts per
million of soluble lead under certain conditions of
application and firing. These glazes are NOT suitable for contact surfaces of food or beverage ware.
CESCO CRACKLE GLAZES
CODE
MATERIAL
EQQ6000
EQQ6001
Clear Crackle
1040—1120°C
White Crackle
1040—1120°C
500mL
1L
11.05
20.00
CRACKLE GLAZES
1080—1120°C
250ml $11.70
16.15
28.90
EQQ6131
Italian Blue Crackle (EC131)
1000—1060°C
16.15
28.90
EQQ6132
Egyptian Blue Crackle (EC132)
1000—1060°C
16.15
28.90
CODE
ITEM
CFX01
Celedon
CFX03
Persian Blue
CFX02
Clear
CFX04
Iceberg
CESCO INTERGLAZE (+2ppm)*
1080 - 1100°C
To be applied between two glazes to make the top
glaze flow creating a spill-over effect.
500ml $16.70
1L
$29.90
CODE
ITEM
ERG9000
CODE
AE5139
MATERIAL
Cesco Base Coat - Engobe
Interglaze
500mL
1L
5L
10L
11.00
14.35
54.10
96.55
To be applied to terracotta or other coloured clays to make glazes and underglazes fire to the same colour as they normally
show on white clay. Brush onto clayware and decorate before bisque firing. Suits standard earthenware bodies.
AD4976
Cesco Terra Sigilliata
N/A
9.90
N/A
N/A
21
CODE
GLAZES
$11.90 each
4oz jar (approx. 118ml)
Tips
 To create custom looks, apply Crystals in combination with other glazes and other colours.
 Crystals work well to high fire cone 5-6. For high
fire application, it is recommended to fire a test
piece.
22
GLAZES
Color Burst Crystal Chips
Duncan® Color Burst Crystal Chips will make your ceramic art projects explode
with an eruption of colour! Available in a popular array of colours and various
sized chips, Color Burst Crystal Chips can be mixed with any of your favourite
glazes or placed where desired when the glaze is wet to create one-of-a-kind
pieces that explode with vibrant bursts of colour. Crystal chips will react differently in the firing process depending on what glaze you pair them with, changing
the colour, burst size or amount of flow. Firing range cone 06 to cone 6.
56.7g Tube
$16.95 each
DCR875 Pitch Black
DCR879 Green Thunder
DCR876 White Hot
DCR880 Yellow Burst
DCR877 Blue Surge
DCR881 Purple Blaze
DCR878 Orange Blast
DCR882 Red Eruption
$6.90 each
DFD254
Black Licorice
DFD258
Pure White
DFD265
French Straw
DFD266
French Papaya
DFD271
French Kiwi
DFD274
Light Pink
DFD275
Neon Blue
DFD278
French Really Red
23
LUSTRES
for application to glass and glazed ceramic
For best results the lustre should be applied evenly to clean glazed surfaces with a flat camel hair or sable brush. A
much thinner application should be used if firing on glass. Too heavy a coat will blister or flake. Uneven coats may
cause variations. Thin, even applications of lustres are a must. If a deeper colour is desired, then reapply the material being used and refire. Never pat a spot, but go over the entire area and refire. Lustres can be applied over one
another as long as you fire in between.
Work in a dust and draft free area. Dust and moisture are the two most detrimental elements in working with lustres. Clean the surface of the glaze with a cleaner to remove any dust, finger-paints, or grease-like coatings sometimes found on the ware after glaze firing.
Lustres vary in viscosity and workability. Those that appear thick and tacky can be conditioned by adding a few
drops of Lustre Thinner. Lustres may be also thinned further and applied by spraying.
FLUID WRITING PEN ideal for applying lustre 19.50
CODE
COLOURS
2g
2.5g
5g
25g
28.65
LUA
Aurora
-
-
7.70
LUC
Copper
-
35.20
61.75
LUG
Gold 12%
LUGA
Golden Amber
-
LUGR
Green
LUIL
55.10
132.15
-
-
7.70
28.65
-
-
14.05
42.65
Iris Lilac
-
-
9.35
36.85
LUIY
Iris Yellow
-
-
6.40
24.90
LULB
Light Blue
-
-
12.75
52.95
LULG
Light Green
-
-
10.85
43.20
LUM
Mother of Pearl
-
-
6.75
23.95
Mother of Pearl should be applied in a crisscross manner and stippled to bring out the mottled characteristic.
LUO
Orange
-
-
5.25
-
LUP
Platinum
45.55
-
106.45
-
LURR
Ruby Red
-
20.95
38.05
-
LUT
Turquoise
-
-
13.50
58.35
LUTG
Yellow Green
-
-
8.45
32.35
LUTO
Thinning Oil
6.90
LUTOGP
Thinning Oil for Gold & Platinum
7.80
24
BRUSHES
HAKE BRUSHES
CODE
SIZE
$
HB25
25mm 3.85
HB50
50mm 6.75
HB75
75mm 9.35
GLAZE MOPS
CODE
SQUARE
LONG SHADERS
SIZE
$
GMW18
White 18mm
$5.15
GMW27
White 27mm
$6.95
GMW30
White 30mm
$7.95
GMS
Superior 8mm x 40mm
$10.95
CODE SIZE
$
SOFT FAN BLAZE BRUSHES
CODE SIZE
$
LS316 3/16 4.70
FB8
8
5.95
FB12
12
7.95
LS516 5/16 6.70
LS38
3/8
8.50
LS12
1/2
9.70
LS58
5/8
11.30
ROUND POINTERS
CODE
SIZE
$
RP100
10/0 3.10
RP30
3/0
3.40
RP0
0
3.45
RP2
2
3.50
RP8
8
6.50
RP10
10
9.50
25
BRUSHES
CBSET
CALLIGRAPHY BRUSHES
BS
Brush Set
Set of All 6 Brushes
34.85
INDIVIDUAL CALLIGRAPHY BRUSHES
CODE
SIZE
$
CB0
0
4.15
CB1
1
4.35
CB5
5
5.65
CB7
7
7.35
CB9
9
8.35
CB11
11
9.20
$27.50
CBS Chinese Brush Set $27.50
WTBR
Wire
Texture
Brush
$7.50
26
SLIP TRAILERS
BSTK
BULB SLIP TRAILER KIT
$27.95
100cc trailer with
4 interchangeable
trailing nozzles—
super fine,
fine,
medium,
easy flows
DSTK Decorator Slip Trailing Kit $16.50
Xiem Precision Applicators
1oz Set
3oz Set
$34.65 (PAS1oz)
$36.60 (PAS3oz)
BULB SLIP TRAILERS
STS SLIP TRAILER
$4.50 each or
3 for $12 (STSET)
BSTS
Small (20cc) One Piece
5.80
BSTM Medium (50cc) Two Piece 11.90
BSTL
Large (100cc) Two Piece
15.25
27
RESIN RIBS
$12.85ea
Six shapes cover most hand-building and throwing needs.
Size 0: 70 x 37mm
Size 1: 89 x 43mm
Size 2: 98 x 62mm
Size 3: 127 x 49mm
Size 4: 107 x 51mm
Size 5: 107 x 50mm
0
1
2
3
4
5
Available in four hardnesses:
very soft (red) Great for compressing slabs, burnishing rims, chamois, and handbuilding.
soft (yellow) Perfect for smoothing, burnishing, porcelain, throwing, and handbuilding.
medium (green) Great for compressing bottoms, burnishing, trim marks, throwing, and handbuilding.
firm (blue) Still flexible but stiffer. Great for high burnish and throwing large work.
SMALL RESIN BOWL RIBS
$14.70ea
Large Bowl Ribs also available $25.75
Dimensions 102 x 50mm
Available in four hardnesses:
very soft (red)
soft (yellow)
medium (green)
very firm (blue)
Dimensions 150 x 100mm
Available in two hardnesses:
soft (yellow)
firm (army green)
RESIN PLATTER RIBS
Small $25.75ea
Large $29.40ea
Small Size: 190mm
Large Size: 275mm
Long resin ribs with a gradual curve, perfect
for plates & platters.
Available in firm (army green).
STAINLESS STEEL RIBS
$12.85ea
These ribs are constructed from the finest , flexible stainless steel available, precision cut for a
smooth, accurate edge.
SS0: 70 x 37mm
SS1: 90 x 45mm
SS2: 99 x 59mm
SS4: 107 x 51mm
SS5: 107 x 52mm
SSH015: 140 x 60mm
28
$25.75ea
SS0
SS1
SS2
SS4
SS5
SSH015
STAINLESS STEEL LONG SCRAPERS
MUDSHARK
$14.70ea
$12.85ea
All-in-one resin fettling knife and needle tool. The needle folds neatly away
whilst you’re using the knife end.
These ribs are constructed from the
finest , flexible stainless steel available, precision cut for a smooth, accurate edge. Dimensions 152 x 34mm.
SS-L: Smooth Plain
SS-L18: Fine Serrated 18 Tooth
SS-L24: Extra Fine Serrated 24
SS-L SS-L18 SS-L24
PAISLEY STAINLESS STEEL SCRAPERS
$12.85ea
DRAG TOOL
These ribs are constructed from
the finest , flexible stainless steel
available, precision cut for a
smooth, accurate edge.
Dimensions 82 x 44mm.
$36.80ea
SS-P: Smooth Plain
SS-P
SS-P24: Extra Fine Serrated 24 Tooth
SS-P18: Fine Serrated 18 Tooth
SS-P24
Designed to flute greenware or
leather hard clay. Its tapered design
and bevelled “scoops” easily whisk
away fluted scrap.
SS-P18
CARVING BOW
$55.15ea
11
5m
m
MUDCUTTER
$55.15ea
Size: 225 x 85mm
5m
13
Curly wire for cutting,
texturing and faceting clay
surfaces.
Stainless steel, won’t rust or degrade.
Replacement Wires $5.50ea
m
Great for slicing and cutting
of hand building, or at the
wheel it fits well in the hand.
Stainless steel, won’t rust or degrade.
Replacement Wires $5.50ea
Size: 260 x 180mm
SHREDDERS
$14.70ea
Hard resin handle holds
standard surform blade.
Replacement Blades $5.50ea
RASP SHREDDERS
$18.40ea
MUDWIRE
Straight
Curly
Heavy Duty
$12.85ea
$14.70ea
$14.70ea
Ergonomically designed & made with the same plastic as the
Mudtool Ribs and stainless steel cable wire that offers clean cuts.
Available in straight or curly wire, for detailed cutting.
Flat Size: 275 x 38mm
Conical Size: 275 x 30mm
An excellent sheer form tool
for working on larger
projects without clogging
along surface areas.
29
TOOLS
WOODEN RIBS
STAINLESS STEEL PALETTES/ KIDNEYS
WRA Appleseed 110mm long 4.35
WRF Fin 120mm long
4.35
WRR Rectangular
3.90
WRT Triangle
3.95
PSSS
Serrated 100mm long
5.15
PSSP
Plain 100mm long
3.75
PSSM Mouse 100mm long
Steel Scraper 10pc Set
$17.95
(Large Rect. - serrated
edge 140mm x 70mm)
3.75
PALETTES/ KIDNEYS
FLEXIBLE RUBBER
A
C
B
PFIA
A—Medium 108mm long
3.65
PFIB
B—Small 76mm long
3.50
PALETTES/ KIDNEYS
D
PFLC
5 Piece Wooden Rib Set $10.95
C—Small Firm 76mm long
3.50
PFLD D—Medium Firm 108mm long 3.65
F
RSQ
F—Rubber Squeegee
3.65
PADDLES
THROWING STICKS - WOODEN
PLASTIC SCRAPERS (Pack of 4) $5.50
TS1
Stick 220mm
6.60
TS2
Stick 320mm
9.80
TSH3
Hook 250mm
6.80
TSH4
Hook 360mm
12.85
TS5
Curve 290mm
9.65
TS6
Curve 360mm
12.25
PATT
Patter—Wooden 170mm
6.50
PADD Paddle—Wooden 360mm 8.90
30
TOOLS
MODELLING (BOXWOOD) 203mm (8”)
2.85 each
31.20 for the set
BM1
BM2
BM3 BM4
BM5
BM6
BM7
BM8
BM9 BM10 BM11 BM12
MODELLING (BOXWOOD) 150mm (6”)
$1.20 each
$14.50 for the set
1
2
3
KC KUSHI COMB
4
5
6
11.70
7
8
9
10
11
12
13 14 15
STW SCULPTORS THUMB-WOOD
6.20
31
TOOLS
SANDING PADS & CUTTING WIRE
APTK
SPL
Sanding Pad - Large 120mm x 100mm 3.90
SPS
Sanding Pad - Small
100mm x 60mm 1.95
Available in
coarse or
medium grits
CWTR Cutting Wire Twisted-Rubber
5.85
CWSS Cutting Wire (Stainless Steel)
2.90







ALL PURPOSE TOOL KIT
15.50
Twisted Cutting Wire
Plain Steel Kidney
Boxwood Modelling Tool
Double Ended Ribbon Tool, Needle
Single Ended Ribbon Tool
Boxwood Rib
Sponge
STEEL CALIPERS
SCAL2
255mm long
9.85
SCAL3
305mm long
10.85
PRO-SPONGE
7.60
Extremely soft, super absorbent, longlasting chamois sponge
 Porcelain
 Stoneware
 Finishing
SPONGE
CALIPERS
CP160 160mm (6½”) (Plastic)
4.50
CL
POA
Lidmaster
HSS Hydra Sponge (synthetic) 1.50
NEEDLES
N1 Pro Tool
4.25
N2 Potter’s Needle
6.00
N3 Fine Needle
4.00
SOS Sponge on Stick
32
4.95
TOOLS
RIBBON TOOLS - DOUBLE ENDED
RT1
RT2
RT3
8.65
each
RT4
RT5
RT6
RT7
RT8
RT9
RT10
SUPER LARGE RIBBON TOOLS
RIBBON TOOLS
CODE
ITEM
$
SLRT1 310mm
16.95
SLRT2 360mm
16.95
RTDEA Double Ended 6.25
1
2
RTDEB Double Ended 6.25
RTDED Double Ended 6.25
A
B
D
E
F
RTDEE Single Ended
6.80
RTDEF
Single Ended
6.80
RTDEG Single Ended
6.80
G
MRTS
DCT Deep Cleaning Tool - 270mm long
CLS
CLAY LIFTING SET
MINI RIBBON
TOOL SET
17.50
4.95
15.60
33
TOOLS
RIBBON TOOLS - Stainless Steel
5.15 each
Set of 5 Turning Tools 23.90
TTDE1
FINISHING TOOLS
FRT1
Ribbon Tool 1
8.95
FRT2
Ribbon Tool 2
4.95
FRT3
Ribbon Tool 3
5.65
TTDE2
FRT3
TTDE3
TTDE4
TTDE5
TURNING TOOLS - Stainless Steel
8.95
TTSS1
TTSS2
TTSS3
HOLE PIERCERS
34
HC20
Round 20mm
7.95
HC13
Round 13mm
6.95
HC9
Round 9mm
7.00
HC5
Round 5mm
6.40
HCDE
Double Ended 4.5mm/3mm
5.70
MDT
Multi Drill Tool
6.60
HCS5
Square 5mm
4.95
HCS3
Square 3mm
4.95
TOOLS
ASSORTED TOOLS
CODE
A
B
C
D
E
F
G
I
J
L
M
N
ITEM
$
HML
A—Handle Maker - Large
4.30
HMS
B—Handle Maker - Small
4.30
CUTS C—Clean Up Tool - Small
4.60
CUTL
D—Clean Up Tool - Large
4.95
TW
E—Weenie
4.90
SFW
F—Sgraffito - Fine Wire
5.25
STB
G—Sgraffito Duster
8.50
WLSB I—Wire Loop Sgraffito Tool
with Brush
8.50
DLS
J—Double Ended Stylus
4.90
SPD
L—Salt & Pepper Drill
4.25
SPD2 M—Salt & Pepper Drill
4.90
DES
1.00
N—Doll Eye Setter
KNIVES
CODE
A
B
C
G
GO
H
WST
J
K
L
$
FK110 A - Fettling Knife - 110mm blade
6.90
PKS
B - Potters Knife
16.80
PKPH
C - Potters Knife - Plastic Handle
7.65
SSPK
G - Stainless Steel Palette Knife
7.95
OPK
GO - Offset Palette Knife
2.70
CKF
H - Carving Knife - Fine
6.90
STK
J - Small Trim Knife
6.95
COUT
K - Cut Out Tool
5.80
XPK
L - Xiem Potters Knife
3.85
WIRE SCULPTING TOOL
WSTS
ITEM
SET OF 3
$4.70ea
13.70
35
MENDERS & ENHANCERS
Patch A Tatch (118ml (4oz)) $8.95
APTII Ceramic Enhancer (59ml (2oz))
$20.10
Quality ceramic cement to attach or repair greenware or
bisque. Apply and refire to ensure pieces are attached to
one another.
1. Gently scratch crisscross lines on areas to be joined.
2. Using a soft brush, moisten scored areas or broken
edges with water. Use the same brush to apply a
good coat of Patch-A-Tatch to these areas.
3. Quickly attach or fit the pieces together and hold
securely for a few seconds.
4. Brush a little Patch-ATatch over the joint and,
when set and thoroughly
dry, scrape, sand, sponge
or otherwise finish, and
the piece is ready for
decorating and firing.
5. Clean up with water.
APT II Ceramic Enhancer is an acrylic emulsion
additive that is food safe and non-toxic. It
cleans up with water and has an indefinite
shelf life. APT-II Ceramic Enhancer will thicken
all brands of slip and clay bodies, which
enables attaching, mending and creating
surface decorations on greenware, bisque or
finished glazed pieces.
APTII Porcelain and Stoneware Enhancer
(59ml (2oz))
$23.10
Mends and attaches bisque, glazed &
greenware pieces. Provides smoother
application of glazes & colours.
MISCELLANEOUS
‘Slop-Sak’ Recycle Sacks
Easy clay recycling
available in 2 sizes (for 10L or 20L buckets)
10L Capacity $15.00 20L Capacity $19.95
‘Slop-Sak’ Turning Skirt
$37.00 (to fit Large Venco Wheel)
For a cleaner working studio!
Skirts also available to fit many other
makes & models of wheels.
CANE TEAPOT HANDLES
CLOCK PARTS
CODE
SIZE
CMP Clock Movement
CHA
Clock Hands - Alloy
(various designs)
$ ea
7.90
CODE
SIZE
$
THP100
Half Round 100 mm (4”) Plain
3.55
THT75
Half Round 75 mm (3”) Top Knot
3.55
THT100
Half Round 100 mm (4”) Top Knot
3.80
THO230
Oval 230 mm (9”) Plain
4.05
LP1 LOTION 2.10
PUMP
2.25
PIGGY BANK/ SALT SHAKER PLUG
23mm & 24mm diameters
36
20c each
TOOLS & MISCELLANEOUS
SIEVE FRAMES AND MESHES
CODE
ITEM
$
M60
60 Mesh
31.60
M80
80 Mesh
M120
120 Mesh
M200
200 Mesh
SM60
Sieve Mesh 60
300mm x 300mm
17.15
SM80
Sieve Mesh 80
300mm x 300mm
18.30
SM120
Sieve Mesh 120
TTS60
Talisman 60 Mesh Test Sieve
25.85
TTS80
25.85
TTS120
25.85
TIM
Talisman Interchangeable Mesh
42.15
TRS
Talisman Rotary Sieve (including 1 Interchangeable Mesh)
265.50
TB
Talisman Brush
9.90
TBH
Talisman Brush Holder
23.40
Rubber Trims
31.60
Approx. 190mm diameter
31.60
To fit 5L Bucket
31.60
300mm x 300mm
20.60
Raku Talisman 1
TR1
opens to take pots with approx.
12cm diameter
62.65
Raku Talisman 2
TR2
15cm diameter
62.65
Raku Talisman 3
TR3
20cm diameter
62.65
Raku Talisman 4
TR4
opens to take pots with 8-9cm
diameter
62.65
Talisman Raku Tongs are approximately 1
metre long and weigh approximately 1.2kg.
TONGS
Glaze Tong
TGPH
Standard with plastic coated
handles, 270mm
18.80
Glazing Claw
TGSH
Stainless steel, spring loaded
hardwood handles, 350mm
25.50
37
STUDIO EQUIPMENT
BANDING WHEELS
BATTS—TEMPERED MASONITE
WBW1 Whirler Aluminium (Tall)
119.50
Height = 170mm
Wheel Diameter=220mm
WBW2 Whirler Aluminium (Short)
114.50
Height = 65mm
BWA
Cast Iron/ Aluminium
104.90
CODE
BATT
EACH
DIAMETER
B150
150mm
2.85
B200
200mm
3.25
B230
230mm
3.85
B250
250mm
B280
280mm
ril
4.15
a
or
B300
mp
e
300mm
T
B330
330mm
4.99
B395
395mm
7.10
XBM12
4.50
4.65
BATMATE™
Place Batmate™ below your
problem bats on the wheel
and instantly your warped
bats become stable.It is also
great for trimming bowls and
plates.
Cast Iron / Aluminium Turntable 54.95
Height = 100mm
BWC
Craftwood with Bearing
$17.35
The perfect solution for bat
jitter and warping.
Height = 100mm
BWA2
u
O
y
ck
o
St
f
to
TALISMAN HAND PLUNGER $62.95
*Stainless Steel*
700mm
length with
220mm
diameter
plunger plate
29.95
TALISMAN GLAZE WOKS
HE
HAND EXTRUDER
15.90
Made from Durable Plastic
38
TGWS Small Deep
450mm wide 230mm deep
61.90
TGWL Large Shallow
630mm wide 175mm deep
82.50
STUDIO EQUIPMENT
VENCO SLAB ROLLER
2087.25
VENCO TABLE TOP SLAB ROLLER
1119.95
Features
Durable Waterproof Heavy Duty Ply Side Tables
600mm long x 400mm wide
Removable Side Tables for easy storage
Double Roller Geared Drive
Corrosion resistant precision cut gears
Lightweight @20kg
Specifications
Table Height 87cm Table Length 120cm
Table Width 82cm Roller Width 76cm
Packed Weight 70kg (0.52m 3)
Additional Canvas available
Additional Canvas
98.90
VENCO HIGH CAPACITY EXTRUDER with Die Set
720.25
Optional Hollow Die Set (not shown)
104.40
WME WALL MOUNTED EXTRUDER
423.25
Designed and Made in Australia
Super Robust
Ideal for Schools and Studios
76mm Barrel
All Stainless Steel
Includes 4 Dies
and 1 Blank Die
Standard Die
Shapes
Quick Release Die Holder
$91.20
PUGMILLS - VENCO
Standard
CODE
$
Including Optional
Stainless Steel Barrel
$
MODEL
VPM
Mini Pug (pictured)
1752.05
Included as Standard
VP75
Standard 75mm (3”) Nozzle, Non-Deairing
2605.90
N/A
VPD75
Deairing 75mm (3”) Nozzle, 138mm (5½”) Barrel
3668.50
4477.00
VPD87
Deairing 87mm (3.5”) Nozzle
5009.40
7090.60
VPD100
Deairing 100mm (4”) Nozzle, 200mm Barrel
10285.00
Included as Standard
39
STUDIO EQUIPMENT
DIRECT DRIVE ACCESSORIES
CODE
VDD1
Only $1575.00
ITEM
$
Work Table—Left or Right
59.50
Also suits No. 3 or No. 5 Models
VDDS
Seat
150.60
VDDSK
Stand Up Kits
(raises wheel head to 84cm)
185.90
VDD2
Riser Batt
55.80
VDD3
Standard Batt
31.90
VENCO POTTERY WHEELS (Australian Made)
All Venco Products come with a 1 year manufacturer’s warranty
CODE
VW313
ITEM
$
No. 3 1/2 HP, 330mm (13”) Wheel Head
1185.90
VW313SS No. 3 1/2 HP, 330mm (13”) Wheel Head, Stainless Steel
1325.90
VW513
1249.00
No. 5 1/2 HP, 330mm (13”) Wheel Head, Heavy Duty, Speed Lock
VW513SS No. 5 1/2 HP, 330mm (13”) Wheel Head, Heavy Duty, Speed Lock, Stainless Steel
1410.75
VENCO PARTS & ACCESSORIES
VSK
Stand Up Kit for Models 3 & 5
389.75
VS
Seat to suit Models 3 & 5
150.60
VD611
Drive Wheel Assembly 280mm (11”) for Model 6
98.45
VD311
Drive Wheel Assembly 280mm (11”) for Model 3
98.45
VD13
Drive Wheel Assembly 305mm (13”) for Models 3 & 5
98.45
VH11
Wheel Head 280mm (11”) Diameter Shaft 20mm (3/4”)
155.00
VH13
Wheel Head 330mm (13”) Diameter Shaft 25mm (1”)
182.75
VBK20
Bush Kit 20mm (3/4”) Shaft 280mm (11”) Wheel Head for Models 3 & 6
59.95
VBK25
Bush Kit 25mm (1”) Shaft 330mm (13”) Wheel Head for Models 3 & 5
59.95
VM25
1/4HP Motor Cradle & Spring (Compact)
369.00
VM50
1/2HP Motor Cradle & Spring (No. 3, 5)
405.25
VCD
Cone Drive (all models)
65.30
VSL
Spring - Large
13.90
VSS
Spring - Small
8.10
Grommet -Small & Large
3.50
VGS/VGL
40
Note: Venco Models 3 & 5 requires 4 Small Grommets for the motor mounting & 4 Large Grommets
for the rods that go across the wheel. The Venco Model 6 requires 8 Large Grommets.
KILN & PIZZA OVEN BUILDING MATERIALS
PYROMETERS AND SPARE PARTS
CODE
DENSE FIRE BRICKS
ITEM
$
Pyrometer TES1314 Multi Input Meter
Inc. “N” Type Thermocouple and Sheath
PYRO
CODE
337.10
TES1314 Pyrometer TES1314 Multi Input Meter
252.20
THERMO Thermocouple Type “N” or “K” (no sheath)
80.95
TS
Sheath
35.00
MB
Metal Bracket (clamp for sheath)
9.80
BLOCK
Ceramic Block
5.95
CWD
Compensating Wire - 3 metres (N,K,R)
17.85
PLUG
Miniature Plug (Type N or Type K)
9.90
MISCELLANEOUS MATERIALS
CODE
ITEM
DIMENSIONS
$
DFP50
Square Pave
300 x 300 x 50mm
17.80
DFP40
Square Pave
300 x 300 x 40mm
14.50
DFB75B
Fire Brick
345 x 115 x 75mm
13.35
DFB75
Fire Brick
230 x 115 x 75mm
7.60
DFB40
Fire Brick
230 x 115 x 40mm
5.25
DFB25
Fire Brick
230 x 115 x 25mm
4.15
DFB75/63B Tapered Fire Brick 345 x 115 x 75/63mm
13.35
DFB75/51B Tapered Fire Brick 345 x 115 x 75/51mm
13.35
DFB75/63A Tapered Fire Brick 230 x 115 x 75/63mm
8.10
DFB75/51A Tapered Fire Brick 230 x 115 x 75/51mm
8.10
ITEM
$
CODE
ITEM
$
CSB
Calcium Silicate Board 1000 x 1250 x 30mm
73.80
RBK23
No.23 Refractory Insulating Brick
5.35
SSN
Stainless Steel Needles (per kilo)
(adds strength to castables)
24.90
RBK26
No.26 Refractory Insulating Brick
5.85
KWL
Kanthaal Wire Thick
4.95
(2.3mm) Gauge x 1m
FA70 Fibre Anchor 70mm
8.10
KWM
Kanthaal Wire Medium (1.4mm) Gauge x 1m
3.50
SSIS
6.00
KWS
Kanthaal Wire Thin
2.00
Stainless Steel Insultwist Stud
(0.8mm) Gauge x 1m
CEMENTS
CODE
ITEM
APPLICATION
PACK SIZE
$
500g
8.75
1kg
14.60
300ml
19.55
5kg
11.50
25kg
39.95
Refractory castable 1450°C
25kg
49.50
Pyrocrete 165
Refractory castable 1650°C
25kg
90.60
Mortar (High Temp; Pre-made)
Dry Refractory Mortar
5kg
16.70
25kg
53.70
CFC
Coresticker Refractory Cement
Fibre insulation to metal
C900
Corfix 900
Mortar in caulking gun for easy application
HAC
High Alumina Cement
Dry Refractory Mortar (Combine with 2-3 parts sand)
CP145
Pyrocrete 145
CP165
DRM
FIBRE
CODE
ITEM
ROLL*
LINEAR MTR
$
LINEAR HALF
MTR $
DENSITY
* Roll = 7.3m (L) x 610 mm (W) x 25mm (D). Also available in 50mm thickness - POA.
ZBHF
Zirconia Blanket - Hot Face Fibre
Also available in roll size 1200 x 1200 x 25mm
231.75
38.65
23.20
POA
-
-
128kg/m3 - 1425°C
IF128
Isowool - 128kg Fibre Insulation
153.00
29.15
18.25
128kg/m3 - 1240°C
KP
Kaowool Paper 3mm x 600mm
N/A
39.30
23.60
1400°C
CODE
ITEM
DIMENSIONS
$
RFB12
Refractory Fibre Board
1000 x 610 x 12mm
74.65
RFB25
Refractory Fibre Board
1000 x 610 x 25mm
109.70
41
KILN BUILDING MATERIALS
KILN SHELVES
CODE
SIZE
$
KS1
305 X 305 X 6.5mm
(12 X 12 X ¼ inches)
39.90
KS2
305 X 305 X 13mm
(12 X 12 X ½ inches)
49.95
KS3
330 X 330 X 13mm
59.90
KS4
330 x 330 x 16mm
(13 x 13 x ⅝ inches)
69.95
KS5
406 X 406 X 13mm
85.10
KS6
406 X 406 X 16mm
(16 X 16 X ⅝ inches)
98.90
KS7
406 X 406 X 19mm
(16 X 16 X ¾ inches)
108.25
KS9B
457 x 305 x 16mm
84.70
KS10
457 X 305 X 19mm
99.65
KS11
457 X 457 X 19mm
133.65
KS12
457 X 457 X 25mm
(18 X 18 X 1 inches)
159.50
KS13
508 X 508 X 19mm
179.50
KS13B
508 X 508 X 25mm
(20 X 20 x 1 inches)
199.50
KS14B
610 X 305 X 16mm
109.75
KS15
610 X 305 X 19mm
123.40
KS15B
610 x 305 x 25mm
(24 X 12 x 1 inches)
147.30
KS17
610 X 610 X 19mm
233.55
KS17B
610 X 610 X 25mm
281.00
KS19B
610 x 457 x 25mm
213.70
Cutting Fee per shelf
42
5.00
PROPS (50mm Diameter)
CODE
SIZE
$ ea
P1
25mm (1”)
1.95
P2
50mm (2”)
3.90
P3
75mm (3”)
5.85
P4
100mm (4”)
7.80
P5
125mm (5”)
9.75
P6
150mm (6”)
11.70
P7
175mm (7”)
13.65
P8
200mm (8”)
15.60
P9
225mm (9”)
17.55
P10
250mm (10”)
19.50
P11
275mm (11”)
21.45
P12
300mm (12”)
23.40
P13
325mm (13”)
25.35
P14
350mm (14”)
27.30
CONES & STILTS
CONE TEMPERATURE CHART
Standard
CONE
ORTON CONES
NOTE: When ordering cones please be sure to state whether you require mini or
standard cones.
Mini
60°C/hr
150°C/hr
300°C/hr
022
N/A
N/A
630
021
N/A
N/A
643
020
N/A
N/A
666
019
676
693
723
018
712
732
752
017
736
761
784
016
769
794
825
015
788
816
843
014
807
836
870
013
837
859
880
012
858
880
900
011
873
892
915
010
898
913
919
09
917
928
955
08
942
954
983
07
973
985
1008
06
995
1011
1023
05½
1012
1023
1043
STILTS
STEEL POINTED, 3 POINT STAR
Suitable for firing to 1200°C only
05
1030
1046
1062
CODE
04
1060
1070
1098
SIZE
(Point to Point)
03
1086
1101
1131
SS1
18mm
2.85
02
1101
1120
1148
SS2
25mm
4.75
01
1117
1137
1178
SS3
30mm
5.10
1
1136
1154
1184
SS35
35mm
5.90
2
1142
1162
1190
3
1152
1168
1196
SS55
55mm
6.95
4
1160
1181
1209
SS70
70mm
7.50
5
1184
1205
1221
SS85
85mm
8.10
5½
1201
1223
N/A
SS120 120mm
6
1220
1241
1255
SS
7
1237
1255
1264
8
1247
1269
1300
9
1257
1278
1317
10
1282
1303
1330
11
1293
1312
1336
12
1304
1324
1355
CODE
$ ea $ per Box 50
MC
Mini Cone
0.55
18.80
SC
Standard Cone
0.90
28.00
SCS
Standard Cone Stand 4 Hole
2.50
N/A
The Three Cone System
While a single cone may be used on a shelf to “witness” the firing, it is recommended to use three different cones.
The group consists of a Firing Cone - the desired cone for the ware being produced; the Guide Cone - one cone number cooler; and the Guard Cone - one cone
number hotter than the Firing Cone.
These cones need to be set deep in the kiln, yet should be visible through the
bung hole.
When the Guide Cone
starts to bend, the ware is
approaching maturity.
The bending of the Firing
Cone indicates that the
firing is at its correct stage.
If the Guard Cone has bent,
the firing has passed its
best
time-temperature
window.
STILT STONE
SPURS - DOUBLE POINTED, 3 POINT STAR
Suitable for firing to 1100°C only
$
SIZE
(Point to Point)
CODE
$
SSC50
50mm
0.75
SSC55
55mm
0.80
SPST SPEEDY STILTS (18 Pack) 17.65
Suitable to 1160°C
12.00
6.50
STILTS - STEEL POINTED BARS
To raise glazed ware from kiln shelf surface. Suitable to 1100°C only.
CODE
SB80
SIZE
Bar Stilt 19mm High 80mm Point to Point
$
9.80
43
BISQUEWARE
BISQUE TILES
CODE
T203
BT203
T100
BT100
ITEM
PACK SIZE
$
White Earthenware Tile
152mm x 203mm (6 x 8”)
Single
2.60
Box of 35
64.00
Terracotta Tile
100mm x 100mm (4 x 4”)
Single
1.45
Box of 50
38.65
BISQUEWARE - WHEEL THROWN
CODE
ITEM
BCM
Coffee Mug (various styles)
BCS
Tea Cup & Saucer
DIMENSIONS
110mm high x 80mm diameter
$
6.00
9.50
BSPS Side Plate - Small
Diameter 195mm
4.50
BSPL
Side Plate - Large
Diameter 240mm
6.00
BDP
Dinner Plate (various styles)
Diameter 295mm
9.00
BPL
Large Platter
Diameter 380mm
24.00
BBS
Small Bowl
4.90
BCB
Cereal Bowl
6.00
BP
Pasta Bowl
BSB
Salad Bowl
13.50
BLD
Large Designer Bowl
30.00
BSR
Spoon Rest
3.50
BMJ
Milk Jug
4.50
BPD
Pate Dish
110mm diameter
3.00
BQD
Quiche Dish
10.50
6.00
BCND Chip ‘n’ Dip Platter
13.50
BVL
Vase - Large (various styles)
15.00
BVS
Vase - Small (various styles)
10.50
Custom shapes can be thrown to order!*
* Conditions Apply
44
PUBLICATIONS
NEW CERAMICS SERIES
TITLE
AUTHOR
$
Additions to Clay Bodies
Kathleen Standen
35.00
Colour in Glazes
Linda Bloomfield
39.99
Developing Glazes
Greg Daly
35.00
Firing Kilns
Benedict Brierley
39.99
Natural Glazes
Miranda Forrest
35.00
Sculpting & Handbuilding
Claire Loder
35.00
Paper Clay Art & Practice
Rosette Gault
35.00
Porcelain
Vivienne Foley
39.99
Throwing
Richard Phethean
35.00
Other Titles In This Series Are Also Available.
BOOKS
Alternative Kilns & Firing Techniques
James Watkins
19.99
Complete Guide to Mid-Range Glazes
John Britt
39.99
Complete Guide to High-Fire Glazes
John Britt
24.99
Making & Installing Handmade Tiles
Angelica Pozo
24.99
Mastering Raku
Steven Branfman
29.99
Modelling Heads & Faces in Clay
Berit Hildre
35.00
Modelling & Sculpting the Figure
Tanya Russell
29.99
Potter’s Dictionary of Materials & Techniques
Frank & Janet Hamer
110.00
MAGAZINES
Ceramics: Technical
27.50
Journal of Australian Ceramics
16.00
Many Other Fantastic Titles Are Also Available.
CERAMICS HANDBOOKS
TITLE
AUTHOR
$
Ceramic Jewellery
Joy Bosworth
39.99
Clay, Light & Water
Margaret O’Rorke
39.99
Large Scale Ceramics
Jim Robison
39.95
Low-firing and Burnishing
Sumi von Dassow
39.99
Slab Techniques
Ian Marsh & Jim Robison
39.95
Throwing Pots
Phil Rogers
39.95
Other Titles In This Series Are Also Available.
45
Woodfired Pizza Ovens
Perfect for outdoor entertaining!
The simple & deliciously enticing taste of woodfired cooking.
Pizza, roasts, bread, scones, damper or
anything that you would cook in your
conventional oven.
Create an artistic focal point.
A functional gathering place.
An aromatic natural heater in the garden.
Able to be utilized all year round.
DIY Pizza Ovens
We stock materials for DIY pizza ovens!
 Refractory goods
 (high temperature cements & mortars)
 Dense Fire Paves
 Insulation
Build your own to suit what size and shape
you like. Even choose your render colour.
The Clay Shed is the Queensland distributor of Clayworks Woodfired Pizza Ovens. For more information
please visit the Clayworks Woodfired Pizza Oven website www.clayworkswoodfiredovens.com.au or contact us.
1. Easily installed by two capable people, no need for
fork lift trucks or cranes.
2. Robust construction using high quality refractory materials able to withstand 1300°C and reinforced with
stainless steel pins.
3. Excellent geometry which means that fire management is simple and excessive smoke avoided.
4. Large cooking area.
46

The Sunshine Coast`s Pottery and Ceramic Supplies

Transcription

Similar documents

In-line pneumatic screener scalps more than a million tons of clay

Book 6

Art Around Us LEVELED BOOK • T

How to Read This Book

here

Ink and Clay 32

Newsletter - Anglian Potters

Times The

here - Ceramic Arts Daily

Here - Ceramic Arts Daily