Production SocketS 331

Series Introduction
QFP-Production Use Socket and Emulation-Adapter
YAMAICHI's IC149-Series is
available in many different
formats, from 44 pins to 240
pins. It is designed to fit most
of the common semiconductors
from various manufacturers.
The PC-Board-Layout for this
SMT-Socket-Series virtually
corresponds to that of the
semiconductor. Since the
space required for this
Socket is the same as the
semiconductoritself, there is
no need to change the PCBoard-Layout after finishing
the experimental stage.
Once the Socket is no longer
required for trials or testing,
it can be removed without
the necessity to redesign the
PC-Board-Layout.
The insertion and fixing of
the IC can be easily achieved by bolting the engaging
top frame. To secure the
Socket before soldering,
it is also available with
positioning pins.
IC149 - Socket
By using this Adapter a connection
between Socket and Emulator or
programming device can be easily
achieved.
Instead of the IC, the Adapter is
bolted to the Socket.
The Adapter has through hole
pins, disentangled in a 3 or 4 row
rough pitch for connection to a
printed circuit board.
IC149 - Socket with Emulation-Adapter
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Production Sockets
331
PRODUCTION SOCKETS - QFP / SOP / PLCC Packages
Another advantage of the
IC149-Series is the YAMAICHI
ICP-Emulation-Adapter, available
for pin counts from 44 to 160
pins.
332
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Explanation:
QFP44 0.8 pitch QFP44 0.8 pitch QFP64 0.5 pitch
QFP64 0.5 pitch QFP64 0.8 pitch QFP64 1.0 pitch QFP80 0.5 pitch
QFP80 0.5 pitch
QFP80
0.65 pitch QFP80 0.65 pitch
QFP80 0.8 pitch
QFP80 0.8 pitch QFP100 0.5 pitch
QFP100 0.5 pitch
BQFP100 0.635 pitch QFP100 0.65 pitch QFP112 0.65 pitch QFP120 0.4 pitch
QFP128 0.8 pitch QFP132 0.635 pitch QFP144 0.5 pitch
QFP160 0.5 pitch
QFP160 0.65 pitch QFP176 0.5 pitch
QFP208 0.5 pitch
QFP240 0.5 pitch
IC - Package
10 x 10
14 x 14
10 x 10
10.4 x 10.4
14 x 14
14 x 20
12 x 12
12 x 12
14 x 14
14 x 14
14 x 20
14 x 20
14 x 14
14 x 14
19.13 x 19.13
14 x 20
20 x 20
14 x 14
28 x 28
22.36 x 22.36
20 x 20
24 x 24
28 x 28
24 x 24
28 x 28
32 x 32
IC-Body
Size
1)IC149-100-*25-B51
and IC149-100-*54-B51 are without SMT fixing metal
* in the ordering code to be replaced by 0 = without positioning pin or 1 = with positioning pin.
IC149-044-*52-B5
IC149-044-*49-B5
IC149-064-*69-B5
IC149-064-*75-B5
IC149-064-*08-B5
IC149-064-*01-B5
IC149-080-*31-B5
IC149-080-*30-B5
IC149-080-*51-B5
IC149-080-*17-B5
IC149-080-*21-B5
IC149-080-*12-B5
IC149-100-*25-B5*1)
IC149-100-*54-B5*1)
IC149-100-028-B5
IC149-100-*14-B5
IC149-112-*42-B5
IC149-120-*43-B5
IC149-128-*80-B5
IC149-132-*15-B5
IC149-144-*45-B5*1)
IC149-160-050-B5
IC149-160-*23-B5
IC149-176-*66-B5
IC149-208-*61-B5
IC149-240-*67-B5
Socket Part Number
12.20 x 12.20
17.2 x 17.2
12.0 x 12.0
12.0 x 12.0
17.2 x 17.2
17.6 ~20.1 x 23.6~26.1
13.6 x 13.6
14 x 14
16 x 16
17.2 x 17.2
17.2 x 23.2
18.8 x 24.8
16 x 16
16 x 16
22.94 x 22.94
17.2 x 23.2
23.2 x 23.2
16 x 16
31.2 x 31.2
27.43 x 27.43
22 x 22
26 x 26
32 x 32
26 x 26
30.6 x 30.6
34.6 x 34.6
IC-Dimensions
(total)
ICP-044-5
ICP-044-2
–
ICP-064-6
ICP-064-2
–
ICP-080-6
ICP-080-6
ICP-080-7
ICP-080-4
ICP-080-5
ICP-080-3
ICP-100-5
ICP-100-5
ICP-100-6
ICP-100-4-4
ICP-112-2
ICP-120-2
ICP-128-2
–
ICP-144-1
–
ICP-160-1
–
–
–
Adapter
Part No.
SEries IC149
Available Sockets Overview
Production Sockets
IC-Body Size
10 x 10
14 x 14
10 x 10
10.4 x 10.4
14 x 14
14 x 20
12 x 12
12 x 12
14 x 14
14 x 14
14 x 20
14 x 20
14 x 14
19.13 x 19.13
14 x 20
14 x 20
20 x 20
14 x 14
14 x 20
22.36 x 22.36
20 x 20
24 x 24
28 x 28
24 x 24
28 x 28
32 x 32
IC-Package
QFP44 0.8 pitch
QFP44 0.8 pitch
QFP64 0.5 pitch
QFP64 0.5 pitch
QFP64 0.8 pitch
QFP64 1.0 pitch QFP80 0.5 pitch
QFP80 0.5 pitch QFP80 0.65 pitch QFP80 0.65 pitch
QFP80 0.8 pitch
QFP80 0.8 pitch QFP100 0.5 pitch BQFP100 0.635 pitch
QFP100 0.65 pitch
QFP100 0.65 pitch
QFP112 0.65 pitch
QFP120 0.4 pitch
QFP128 0.5 pitch QFP132 0.635 pitch
QFP144 0.5 pitch
QFP160 0.5 pitch QFP160 0.65 pitch
QFP176 0.5 pitch
QFP208 0.5 pitch
QFP240 0.5 pitch
IC - Description
12.20 x 12.20
17.2 x 17.2
12.0 x 12.0
12.0 x 12.0
17.2 x 17.2
17.6~20.1 x 23.6~26.1
13.6 x 13.6
14 x 14
16 x 16
17.2 x 17.2
17.2 x 23.2
18.8 x 24.8
16 x 16
22.94 x 22.94
17.2 x 23.2
17.6~20.1 x 23.6~26.1
23.2 x 23.2
16 x 16
16 x 22
27.43 x 27.43
22 x 22
32 x 32
26 x 26
32 x 32
30.6 x 30.6
34.6 x 34.6
IC-Dimensions
(total)
IC149-044-*52-B5
IC149-044-*49-B5
IC149-064-069-B5
IC149-064-075-B5
IC149-064-*08-B5
IC149-064-*01-B5
IC149-080-*31-B5
IC149-080-*30-B5
IC149-080-*51-B5
IC149-080-*17-B5
IC149-080-*21-B5
IC149-080-*12-B5
IC149-100-*25-B5
IC149-100-028-B5
IC149-100-*14-B5
IC149-100-*54-B5
IC149-112-*42-B5
IC149-120-*43-B5
IC149-128-*80-B5
IC149-132-*15-B5
IC149-144-*45-B5
IC149-160-050-B5
IC149-160-*23-B5
IC149-176-*66-B5
IC149-208-*61-B5
IC149-240-*67-B5
Production-Use
IC149
IC51-0444-825
–
IC51-0644-807
–
IC51-0644-824-1
IC51-0644-820-1
–
IC51-0804-808
IC51-0804-795
IC51-0804-956-2
IC51-819 KS-12720
IC51-0804-819-1
IC51-1004-809
IC51-1004-827
IC51-814 KS-12033
IC51-1004-809
IC51-1124-1036-2
IC51-1204-1812
IC51-1289-976-2
–
IC51-1444-1354 / or -7
IC51-1604-1350
IC51-1604-845-1
IC51-1764-1505
IC51-2084-1052-x
IC51-2404-1655-2
Test & Burn-In
Clamshell
IC201-1444-026 / or -034
–
–
IC234-1764-005
IC217-2084-001
IC217-2404-007
–
–
IC201-0644-003
–
–
IC201-0644-019
IC201-0804-020
IC201-0804-014
–
IC201-0804-012
IC201-0804-032
IC201-0804-005
IC201-1004-008
–
IC201-1004-028
IC201-1004-016
–
–
_
Test & Burn-In
Open Top
Socket Variations and Ordering Codes**
**Socket variations are for reference only. To ensure for a suitable socket when ordering it is advisable to first contact Yamaichi
SEries IC149
QFP Socket Cross-Reference
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Production Sockets
333
SEries IC149 QfP Socket
Outline Socket Dimensions
Specifications
Contact Resistance:
30mΩ max. at 10mA and 20mV
A
Dielectric Withstanding Voltage:
100Veff to 700Veff for 1 minute
Insulation Resistance:
500MΩ at 150V DC
Operating Temperature Range:
-25°C to +85°C
B
ExF
Temperature for Reflow-soldering:
220°C for 60 seconds (VPS)
220°C to 250°C for 60 seconds (IR)
Insulation Housing:
Polyphenylenesulfide (PPS) glass filled UL94V-0
Contacts:
Beryllium Copper (BeCu)
D
C
Plating Indication:
Mating Face = Au 0.3µm min. over 2.5 ~ 4.5µm Ni
Solder Face = Au 0.05µm min. over 2.5 ~ 4.5µm Ni
For reference only!
Mating Cycles:
20 insertions maximum
Maximum Allowable Torque: - for 1-time screw connection:
- for repetitive screw connection:
Remarks
1. Ensure a clean contact area. Fluxes, dust and other impurifications may cause corrosion and contact
problems.
2. This Socket is not for automatic production. It is particulary suitable for the development of software
stored in ROM and for testing LSI-IC's.
max 0.147 Nm
min 0.078 Nm
max 0.098 Nm
3. Careful attention must be taken when fixing the Socket, since it is entirely made from thermoplastic
material. If the max. torque is exceeded, the Socket will be damaged beyond repair.
4. If using the Socket with an Adapter, please use the gold-plated Socket version.
Part Number
A
B
IC149-044-*52-B5
24.20
24.20
IC149-044-*49-B5
28.00
28.00
IC149-064-*69-B5
IC149-064-*75-B5
25.00
25.00
IC149-064-*01-B5
IC149-064-*08-B5
C
D
ExF
11.00
12.60
11.50 x 11.50
11.00
12.60
16.20 x 16.20
25.00
25.00
11.00
13,20
12.60
14.80
10.50 x 10.50
10.70 x 10.70
30.15
23.65
8.60
–
23.00 x 17.00
26.00
26.00
8.50
10.10
16.40 x 16.40
IC149-080-*12-B5
32.20
26.60
11.50
13.10
23.00 x 17.00
IC149-080-*17-B5
26.00
26.00
8.10
9.70
16.30 x 16.30
IC149-080-*21-B5
32.20
26.60
8.50
10.10
22.40 x 16.40
IC149-080-*30-B5
IC149-080-*31-B5
25.00
24.00
25.00
24.00
11.00
11.00
13.20
13.20
13.24 x 13.24
12.84 x 12.84
IC149-080-*51-B5
28.00
28.00
11.00
12.60
15.30 x 15.30
IC149-100-*05-B5
30.15
23.65
8.60
–
23.00 x 17.00
IC149-100-*14-B5
32.20
26.60
8.50
10.10
22.40 x 16.40
IC149-100-*25-B5*
26.00
26.00
11.00
13.20
15.24 x 15.24
IC149-100-028-B5
32.00
32.00
11.15
12.75
21.20 x 21.20
IC149-100-*54-B5*
27.00
27.00
13.20
15.40
15.30 x 15.30
IC149-112-*42-B5
32.00
32.00
11.15
12.75
22.40 x 22.40
IC149-120-*43-B5
28.00
28.00
13.20
14.60
15.30 x 15.30
IC149-128-*80-B5
43.90
43.90
12.30
12.60
30.20 x 30.20
IC149-132-*15-B5*
36.00
36.00
9.16
11.36
26.85 x 26.85
IC149-144-*45-B5
34.20
34.20
12.30
12.60
21.14 x 21.14
IC149-160-*23-B5
40.00
40.00
9.90
11.50
31.01 x 31.01
IC149-160-050-B5
IC149-176-*66-B5
IC149-208-*61-B5
IC149-240-*67-B5
39.00
39.00
43.60
47.70
39.00
39.00
43.60
47.70
12.30
12.30
12.30
12.30
12.60
12.60
12.60
12.60
25.30 x 25.30
25.30 x 25.30
29.90 x 29.90
34.00 x 34.00
334
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Production Sockets
Trading Division
Socket Dimensions
SEries IC149 Emulation-Adapter
Specifications
Outline Adapter Dimensions
Contact Resistance:
30mΩ max. at 10mA and 20mV
H
For reference only!
G
A
Dielectric Withstanding Voltage:
700V AC for 1 minute
Insulation Resistance:
500MΩ at 150V DC
Operating Temperature Range:
-25°C to +85°C
F
B
E
Insulation Housing:
PES, glass filled UL94V-0
Contacts:
Phosphor Bronze
Remarks
Plating:
Au 0.3µm min. over 2.5 ~ 4.5µm Ni
1. Ensure a clean contact area. Fluxes,
dust and other impurifications may cause
corrosion and contact problems.
Mating Cycles:
100 times minimum
2. Careful attention must be taken when fixing
the Adapter, since it is made from thermoplastic
material. By exceeding the maximum torque a perfect
performance can no longer be guaranteed.
D
Maximum Allowable Torque:
- for 1-time screw connection:
- for repetitive screw connection:
max 0.147 Nm
min 0.078 Nm
max 0.098 Nm
C
Part Number
A
B
C
D
E
F
G
H
ICP-044-2
29.90
29.90
25.00
15.00
25.00
15.00
8.08
2.4
ICP-044-5
25.10
25.10
22.20
12.20
22.20
12.20
8.08
2.4
ICP-064-2
28.00
28.00
25.53
15.00
25.53
5.90
6.20
2.4
ICP-064-6
25.00
25.00
–
–
–
–
8.08
2.4
ICP-080-3
36.62
30.62
32.42
21.90
26.42
15.00
6.20
2.4
ICP-080-4
29.32
29.32
25.53
15.00
25.53
15.90
6.20
2.4
ICP-080-5
36.62
30.62
32.42
21.90
26.42
–
6.20
2.4
ICP-080-6
27.00
27.00
14.50
–
14.50
–
8.08
2.4
ICP-080-7
28.00
28.00
16.50
–
16.50
15.90
8.08
2.4
ICP-100-4-1
36.62
30.62
32.41
21.90
26.42
15.90
5.50
3.0
ICP-100-4-4
36.62
30.62
32.41
21.90
26.42
–
5.50
3.0
ICP-100-5
29.00
29.00
16.50
–
16.50
21.28
8.08
2.4
ICP-100-6
34.50
34.50
31.81
21.28
31.81
21.00
5.50
3.1
ICP-112-2
35.00
35.00
31.53
21.00
31.53
–
6.20
2.4
ICP-120-2
28.00
28.00
16.50
–
16.50
–
8.08
2.4
ICP-128-2
43.90
43.90
–
–
–
–
8.08
2.4
ICP-144-1
35.00
35.00
22.50
–
22.50
29.88
8.08
2.4
ICP-160-1
44.20
44.20
40.41
29.88
40.41
–
5.50
3.1
Extender for Emulation-Adapter
For additional height we offer a separate extender,
which can be stacked on top
of the ICP-Emulation-Adapter
Part Number: Ext 4.2-ICP-***-*
(extends the height of ICP by 4.2mm)
Contact Plating: Au over Ni
Part Number: Ext 8.8-ICP-***-*
(extends the height of ICP by 8.8mm)
Contact Plating: Au over Ni
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Production Sockets
335
PRODUCTION SOCKETS - QFP / SOP / PLCC Packages
Adapter Dimensions
0.4 mm pitch
120 Pins - QFP/TQFP120 (30 x 30 pins)
Socket PCB-Layout
IC - Dimensions
Adapter PCB-Layout
View from Soldering Side
Top View from Socket
14mm x 14mm
N3
2.90 max.
N5
Detail C
N1
Part Number
Part Number for Emulation -Adapter
IC149-120-043-B5
(without positioning pins)
ICP-120-2
IC149-120-143-B5
(with positioning pins)
ICP-120-2
Notes:
N1: Metal soldering Tab Clip. Socket may be stabilized by soldering (Reflow) in these 4 areas.
N3: These holes are only necessary for use with positioning pins.
336
N5: No conduits within this hatched area.
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Production Sockets
QFP - Socket and emulation -Adapter
SEries IC149
0.5 mm pitch
80 Pins - QFP/TQFP (20 x 20 pins)
Socket PCB-Layout
IC - Dimensions
Adapter PCB-Layout
View from Soldering Side
Top View from Socket
12mm x 12mm
N3
Detail C
N5
N1
Part Number
Part Number for Emulation -Adapter
IC149-080-031-B5
(without positioning pins)
ICP-080-6
IC149-080-131-B5
(with positioning pins)
ICP-080-6
0.5 mm pitch
80 Pins - QFP/TQFP (20 x 20 pins)
Socket PCB-Layout
IC - Dimensions
Adapter PCB-Layout
View from Soldering Side
Top View from Socket
14.0±0.2
12.0
12mm x 12mm
12.0
14.0
0.5
Detail C
2.80
max.
N3
See Package Details
0.20 ±0.05
0.5
Detail for
Plastic Package
2.076
N5
0.15 ±0.05
0.15 ±0.05
13 x 13 ±0.2
Detail C
0.20 ±0.05
Detail for
Ceramic Package
N1
Part Number
Part Number for Emulation -Adapter
IC149-080-030-B5
(without positioning pins)
ICP-080-6
IC149-080-130-B5
(with positioning pins)
ICP-080-6
Notes:
N1: Metal soldering Tab Clip. Socket may be stabilized by soldering (Reflow) in these 4 areas.
N3: These holes are only necessary for use with positioning pins.
N4: The Socket may be glued to the PC Board within this area.
N5: No conduits within this hatched area. SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Production Sockets
337
QFP - Socket and emulation -Adapter
SEries IC149
0.5 mm pitch
100 Pins - QFP/TQFP100 (25 x 25 pins)
Socket PCB-Layout
IC - Dimensions
Adapter PCB-Layout
View from Soldering Side
Top View from Socket
16.0
10.0 ±0.05
14.0
14mm x 14mm
14.0
16.0
0.5
Detail C
20,40
N3
2.9
max.
15.0 • 15.0
Detail C
N5
0.15
0.2
20.40
N1
0.5
Info: Socket height = 13.20mm
Part Number
Part Number for Emulation -Adapter
IC149-100-025-B5
(without positioning pins)
IC149-100-025-B51
IC149-100-125-B5
(with positioning pins)
IC149-100-125-B51
(without SMT fixing metal)
(without SMT fixing metal)
ICP-100-5
ICP-100-5
100 Pins - QFP/TQFP100 (25 x 25 pins) 0.50 mm pitch
Socket PCB-Layout
IC - Dimensions
Adapter PCB-Layout
View from Soldering Side
Top View from Socket
16.0
10.0 ±0.05
14.0
14.0
14mm x 14mm
N3
2.9
max.
Detail C
20,40
16.0
0.5
15.0 x 15.0
Detail C
N5
0.15
0.2
0.5
20.40
N1
Info: Socket height = 15.40mm
Part Number
Part Number for Emulation -Adapter
IC149-100-054-B5
(without positioning pins)
IC149-100-054-B51
(without SMT fixing metal)
ICP-100-5
IC149-100-154-B5
(with positioning pins)
IC149-100-154-B5
(without SMT fixing metal)
ICP-100-5
Notes:
N1: Metal soldering Tab Clip. Socket may be stabilized by soldering (Reflow) in these 4 areas.
N3: These holes are only necessary for use with positioning pins.
N5: No conduits within this hatched area.
338
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Production Sockets
SEries IC149
0.5 mm pitch
QFP - Socket and emulation -Adapter
144 Pins - QFP/TQFP144 (36 x 36 pins)
Socket PCB-Layout
IC - Dimensions
Adapter PCB-Layout
View from Soldering Side
Top View from Socket
20mm x 20mm
N3
Detail C
N5
Detail C
N1
Part Number
Part Number for Emulation -Adapter
IC149-144-045-B5
(without positioning pins)
IC149-144-145-B5
(with positioning pins)
IC149-144-045-B51
(without SMT fixing metal)
ICP-144-1
ICP-144-1
160 Pins - QFP/TQFP160 (40 x 40 pins) 0.5 mm pitch
Socket PCB-Layout
IC - Dimensions
Top View from Socket
24mm x 24mm
Detail E
N3
N1
Detail E
Part Number
IC149-160-050-B5
Part Number for Emulation -Adapter
(without positioning pins)
IC149-100-054-B51
(without SMT fixing metal)
Notes:
N1: Metal soldering Tab Clip. Socket may be stabilized by soldering (Reflow) in these 4 areas.
N3: These holes are only necessary for use with positioning pins.
N5: No conduits within this hatched area.
Not available for this socket
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Production Sockets
339
0.5 mm pitch
176 Pins - QFP/TQFP176 (44 x 44 pins)
Socket PCB-Layout
IC - Dimensions
Top View from Socket
Detail E
N1
Detail E
N3
0.22 ±0.05
0.14 ±0.05
0.60 ±0.15
Part Number
Part Number for Emulation -Adapter
IC149-176-066-B5
(without positioning pins)
Not available for this socket
IC149-176-166-B5
(with positioning pins)
Not available for this socket
0.5 mm pitch
208 Pins - QFP/TQFP208 (52 x 52 pins)
Socket PCB-Layout
IC - Dimensions
Top View from Socket
N1
Detail E
N3
Detail E
Part Number
Part Number for Emulation -Adapter
IC149-208-061-B5
(without positioning pins)
Not available for this socket
IC149-208-161-B5
(with positioning pins)
Not available for this socket
Notes:
N1: Metal soldering Tab Clip. Socket may be stabilized by soldering (Reflow) in these 4 areas.
N3: These holes are only necessary for use with positioning pins.
340
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Production Sockets
240 Pins - QFP/TQFP240 (60 x 60 pins) 0.5 mm pitch
Socket PCB-Layout
IC - Dimensions
Top View from Socket
N1
Detail E
Detail E
Part Number
Part Number for Emulation -Adapter
IC149-240-067-B5
(without positioning pins)
Not available for this socket
IC149-240-167-B5
(with positioning pins)
Not available for this socket
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Production Sockets
341