HDPE PIPE - Fabco Plastics

Transcription

HDPE PIPE - Fabco Plastics
HDPE PIPE
HDPE Pipe
1
Fabco Plastics is the leading Canadian
supplier of industrial plastic pipe including
HDPE. Our dedicated and knowledgeable
sales staff can provide high quality
technical
information
and
accurate
project quotations on a timely basis.
Fabco provides HDPE pipe to 63”, custom
fabricated butt fusion fittings, butt fusion
equipment and easy to use electrofusion
fittings to 12”.
The standard length of HDPE pipe is 50
feet, in sizes above 2” in diameter with
longer lengths available on request.
Coiled pipe is available in diameters up to
3” and is available in 250 and 500 foot
lengths. Larger pipe sizes and coil lengths
are available on special request.
2
3
4
5
Features:
HDPE Pipe is Leak Proof
• HDPE pipe can be joined by thermal fusion to
form a joint that is as strong as the pipe itself
and is leak free. Thermal fusion eliminates
potential leak points every 8-20 feet commonly
found with Concrete, PVC and Ductile Iron pipe.
Leak proof joints also eliminate infiltration and
exfiltration problems experienced with other
pipe joining methods. Since fused joints are
self-restraining, costly thrust restraints or thrust
blocks are not required.
6
7
8
HDPE Pipe is Corrosion and Chemical
Resistant
• HDPE pipe will not corrode, tuberculate or
support biological growth. It is the material of
choice in harsh chemical environments. HDPE
pipe has a smooth ID and maintains its flow
capability over time - Hazen Williams C Factor
remains 150, even after years of use.
HDPE Pipe is Flexible and Fatigue
Resistant
9
• HDPE pipe can be bent to a radius 25 times
the nominal pipe diameter. This can eliminate
many fittings required for directional changes
compared to piping systems made from other
materials. In addition, the flexibility of HDPE
pipe makes it well suited for dynamic soils
and areas prone to earthquake. HDPE pipe
for pressure applications can accept repetitive
pressure surges that exceed the static pressure
rating of the pipe.
HDPE Pipe is Lightweight and Impact
Resistant
• HDPE pipe is much easier to handle and install
than heavier, rigid metallic or concrete pipe,
allowing for cost advantages in the construction
process. It is structurally better able to
withstand an impact than other pipe materials,
especially in cold weather installations when
other pipes like PVC are prone to cracks and
breaks.
HDPE Pipe is Easy to Install
• Flexibility and leak free joints allow for unique
and cost effective methods of installation of
HDPE pipe that the rigid Concrete, PVC and
Ductile Iron pipes can’t use. These alternate
installation methods (Horizontal Directional
Drilling, Pipe Bursting, Sliplining, Plow and
Plant, Submerged or Floating Pipe) can
save considerable time and money in most
applications.
HDPE Pipe is Cost Effective and
Permanent
• HDPE pipe is cost effective and has long term
cost advantages due to its physical properties,
leak free joints and reduced maintenance costs.
The Plastics Pipe Institute estimates the service
life for HDPE pipe to conservatively be 50-100
years.
10
1-48
Toronto, Edmonton, Saskatoon, Vancouver, Montreal
HDPE PIPE
Average
Nominal
Outside
Pipe
DiamSize
eter
3
3.50
4
4.50
5
5.56
6
6.63
7
7.13
8
8.63
10
10.75
12
12.75
13
13.38
14
14.00
16
16.00
18
18.00
20
20.00
22
22.00
24
24.00
26
26.00
28
28.00
30
30.00
32(M)
31.59
36
36.00
40(M)
39.47
42
42.00
48(M)
47.38
54
54.00
55(M)
55.30
63(M)
63.21
DR32.5 (50
Average Min.
Inside
Wall
Diam- Thicketer
ness
4.206 0.138
5.200 0.171
6.193 0.204
6.660 0.219
8.062 0.265
10.049 0.331
11.918 0.392
12.503 0.412
13.087 0.431
14.956 0.492
16.826 0.554
18.695 0.615
20.565 0.677
22.434 0.738
24.304 0.800
26.174 0.862
28.043 0.923
29.533 0.972
33.652 1.108
36.894 1.214
39.260 1.292
44.291 1.458
50.478 1.662
51.688 1.701
59.086 1.945
PSI)
Average
Weight
(lbs/ft)
0.83
1.27
1.80
2.08
3.05
4.73
6.66
7.33
8.03
10.48
13.27
16.38
19.82
23.59
27.68
32.11
36.86
40.88
53.08
63.80
72.24
91.94
119.42
125.22
163.62
DR26 (64 PSI)
Average Min.
Average
Inside
Wall
Weight
Diam- Thick(lbs/ft)
eter
ness
4.133 0.173
1.03
5.109 0.214
1.57
6.085 0.255
2.23
6.544 0.274
2.58
7.922 0.332
3.78
9.873 0.413
5.87
11.710 0.490
8.25
12.284 0.514
9.08
12.858 0.538
9.95
14.695 0.615 12.99
16.532 0.692 16.45
18.369 0.769 20.30
20.206 0.846 24.57
22.043 0.923 29.24
23.880 1.000 34.31
25.717 1.077 39.80
27.554 1.154 45.68
29.018 1.215 50.67
33.065 1.385 65.79
36.251 1.518 79.07
38.575 1.615 89.54
43.519 1.822 113.96
49.597 2.077 148.02
50.786 2.127 155.20
58.055 2.431 202.81
DR11 (160 PSI)
Nominal Average
Pipe
Outside
Size
Diameter
3
4
5
6
7
8
10
12
13
14
16
18
20
22
24
26
28
30
32(M)
36
3.50
4.50
5.56
6.63
7.13
8.63
10.75
12.75
13.38
14.00
16.00
18.00
20.00
22.00
24.00
26.00
28.00
30.00
31.59
36.00
Average
Inside
Diameter
2.825
3.633
4.491
5.348
5.752
6.963
8.678
10.293
10.797
11.302
12.916
14.531
16.145
17.760
19.375
20.989
22.604
24.218
25.505
29.062
Notes
DR21 (80 PSI)
Average Min.
Average
Inside
Wall
Weight
Diam- Thick(lbs/ft)
eter
ness
3.147 0.167
0.76
4.046 0.214
1.26
5.001 0.265
1.93
5.956 0.315
2.73
6.406 0.339
3.16
7.754 0.411
4.63
9.665 0.512
7.19
11.463 0.607 10.11
12.025 0.637 11.13
12.587 0.667 12.19
14.385 0.762 15.93
16.183 0.857 20.16
17.981 0.952 24.88
19.779 1.048 30.11
21.577 1.143 35.83
23.375 1.238 42.05
25.173 1.333 48.77
26.971 1.429 55.99
28.405 1.504 62.10
32.366 1.714 80.62
35.485 1.879 96.91
37.760 2.000 109.74
42.599 2.256 139.67
48.549 2.571 181.41
49.713 2.633 190.21
56.828 3.010 248.55
DR9 (200 PSI)
Min. Wall
Thickness
Average
Weight
(lbs/ft)
Average
Inside
Diameter
0.318
0.409
0.506
0.602
0.648
0.784
0.977
1.159
1.216
1.273
1.455
1.636
1.818
2.000
2.182
2.364
2.545
2.727
2.872
3.273
1.38
2.29
3.50
4.96
5.74
8.41
13.06
18.37
20.22
22.15
28.93
36.62
45.21
54.70
65.10
76.41
88.61
101.72
112.82
146.48
2.676
3.440
4.253
5.064
5.447
6.593
8.218
9.747
10.224
10.702
12.231
13.760
15.289
16.818
18.347
19.876
21.404
22.933
24.152
-
PSI)
Average
Weight
(lbs/ft)
0.93
1.54
2.35
3.33
3.85
5.65
8.77
12.34
13.58
14.87
19.43
24.59
30.35
36.73
43.71
51.30
59.50
68.30
75.75
98.35
118.22
133.86
170.37
221.29
232.03
-
DR7.3 (254 PSI)
Min. Wall
Thickness
Average
Weight
(lbs/ft)
Average
Inside
Diameter
Min. Wall
Thickness
Average
Weight
(lbs/ft)
0.389
0.500
0.618
0.736
0.792
0.958
1.194
1.417
1.486
1.556
1.778
2.000
2.222
2.444
2.667
2.889
3.111
3.333
3.510
-
1.65
2.73
4.17
5.92
6.85
10.03
15.59
21.92
24.13
26.43
34.53
43.70
53.95
65.28
77.68
91.17
105.71
121.38
134.62
-
2.484
3.193
3.947
4.701
5.056
6.120
7.628
9.047
9.491
9.934
11.353
12.773
14.192
15.611
17.030
18.449
-
0.479
0.616
0.762
0.908
0.976
1.182
1.473
1.747
1.832
1.918
2.192
2.466
2.740
3.014
3.288
3.562
-
1.97
3.26
4.99
7.07
8.18
11.98
18.62
26.19
28.82
31.58
41.24
52.20
64.44
77.98
92.80
108.91
-
• Pipe dimensions are in accordance with ASTM F714 and AWWA C906.
• Pressure ratings are for water at 73.4 deg F.
• Some of the pipe sizes and/or DRs above are only available upon request.
• Other diameters and DRs not listed may be available upon special request.
• All dimensions are in inches unless otherwise specified.
• Weights are calculated by the methodology established in PPI’s TR7.
www.fabcoplastics.com
DR17 (100
Average Min.
Inside
Wall
Diam- Thicketer
ness
3.064 0.206
3.939 0.265
4.869 0.327
5.799 0.390
6.236 0.418
7.549 0.507
9.409 0.632
11.160 0.750
11.707 .0787
12.254 0.824
14.005 0.941
15.755 1.059
17.506 1.176
19.256 1.294
21.007 1.412
22.758 1.529
24.508 1.647
26.259 1.765
27.654 1.858
31.511 2.118
34.547 2.322
36.762 2.471
41.473 2.787
47.266 3.176
48.399 3.253
-
1
2
3
4
5
6
7
8
9
10
1-49
HDPE FITTINGS
Butt 45° Elbows
1
(Elongated)
SDR 11 (STANDARD DIMENSION RATIO) 160
PSI (WORKING PRESSURE AT 73.4°F)
2
3
4
5
A (IN)
3.23
4.72
5.31
6.89
8.46
10.04
10.63
B (IN)
2.64
3.86
4.21
5.35
6.54
7.64
7.8
B
(IN)
C (IN)
WALL
3/4” IPS
1” IPS
1 1/4” IPS
1 1/2” IPS
2” IPS
3” IPS
4” IPS
6” IPS
8” IPS
10” IPS
12” IPS
2.28
2.48
2.83
3.07
3.23
4.72
5.31
6.89
8.46
10.04
10.63
2.05
2.17
2.44
2.64
2.64
3.86
4.21
5.35
6.54
7.64
7.8
0.095
0.119
0.151
0.173
0.216
0.318
0.409
0.603
0.785
0.978
1.16
D (IN)
E
WEIGHT
OD
(IN)
(LBS)
1.05
1.315
1.66
1.9
2.375
3.5
4.5
6.625
8.625
10.75
12.75
4.29
4.69
5.31
5.91
6.38
9.33
10.63
14.09
17.48
20.94
22.64
0.05
0.08
0.14
0.21
0.35
1.07
2
5.55
11.64
21.3
31.84
C (IN)WALL
0.14
0.206
0.264
0.39
0.508
0.633
0.75
D (IN) OD
2.375
3.5
4.5
6.625
8.625
10.75
12.75
E (IN)
6.38
9.33
10.63
14.09
17.48
20.94
22.64
WEIGHT (LBS)
0.23
0.72
1.32
3.77
8.03
14.44
21.3
Molded of PE 100/4710/3408 Black
Butt 90° Elbows
(Elongated)
SDR 11 (STANDARD DIMENSION RATIO) 160
PSI (WORKING PRESSURE AT 73.4°F)
7
NOMINAL
DIAMETER
3/4” IPS
1” IPS
1 1/4” IPS
1 1/2” IPS
2” IPS
3” IPS
4” IPS
6” IPS
8” IPS
10” IPS
12” IPS
8
10
A
(IN)
SDR 17 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4°F)
NOMINAL DIAMETER
2” IPS
3” IPS
4” IPS
6” IPS
8” IPS
10” IPS
12” IPS
6
9
NOMINAL
DIAMETER
A
(IN)
2.68
2.91
3.35
3.7
4.25
5.91
6.89
9.06
11.81
13.78
14.96
B
(IN)
2.05
2.17
2.44
2.64
2.95
4.06
4.53
5.63
7.2
8.27
8.46
C (IN)
WALL
0.095
0.119
0.151
0.173
0.216
0.318
0.409
0.603
0.785
0.978
1.16
D (IN)
OD
1.05
1.315
1.66
1.9
2.375
3.5
4.5
6.625
8.625
10.75
12.75
E
WEIGHT
(IN)
(LBS)
3.2
0.05
3.57
0.09
4.18
0.16
4.65
0.22
5.44
0.43
7.66
1.25
9.14
2.42
12.37
6.76
16.13
15.08
19.15
27.06
21.33
41.05
SDR 17 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4°F)
NOMINAL DIAMETER
2” IPS
3” IPS
4” IPS
6” IPS
8” IPS
10” IPS
12” IPS
A (IN)
4.25
5.91
6.89
9.06
11.81
13.78
14.96
B (IN)
2.95
4.06
4.53
5.63
7.2
8.27
8.46
C (IN)WALL
0.14
0.206
0.264
0.39
0.508
0.633
0.75
D (IN) OD
2.375
3.5
4.5
6.625
8.625
10.75
12.75
E (IN)
5.44
7.66
9.14
12.37
16.13
19.15
21.33
WEIGHT (LBS)
0.28
0.8
1.64
4.8
10.05
18.33
27.47
Molded of PE 100/4710/3408 Black
1-50
Toronto, Edmonton, Saskatoon, Vancouver, Montreal
HDPE FITTINGS
Butt End Caps
1
(Elongated)
SDR 11 (STANDARD DIMENSION RATIO)
160 PSI (WORKING PRESSURE AT 73.4°F)
NOMINAL
DIAMETER
3/4” IPS
1” IPS
1 1/4” IPS
1 1/2” IPS
2” IPS
3” IPS
4” IPS
6” IPS
8” IPS
10” IPS
12” IPS
A (IN) B (IN)
2.05
2.2
2.52
2.83
3.23
4.72
5.31
6.89
8.66
9.84
11.77
0.095
0.119
0.151
0.173
0.216
0.318
0.409
0.603
0.785
0.978
1.16
C (IN) D (IN)
WALL
OD
1.05
1.77
1.315
1.77
1.66
1.99
1.9
2.2
2.375
2.52
3.5
3.7
4.5
3.98
6.625
4.84
8.625
5.83
10.75
6.3
12.75
7.52
2
WEIGHT
(LBS)
0.02
0.04
0.07
0.1
0.19
0.59
1.07
2.88
6.32
10.9
18.39
3
SDR 17 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4°F)
NOMINAL DIAMETER
2” IPS
3” IPS
4” IPS
6” IPS
8” IPS
10” IPS
12” IPS
A (IN)
3.23
4.72
5.31
6.89
8.66
9.84
11.77
B (IN)
0.14
0.206
0.264
0.39
0.508
0.633
0.75
C (IN)WALL
2.375
3.5
4.5
6.625
8.625
10.75
12.75
D (IN) OD
2.52
3.7
3.98
4.84
5.83
6.3
7.52
WEIGHT (LBS)
0.12
0.39
0.71
1.98
4.23
7.53
12.4
Molded of PE 100/4710/3408 Black
Butt Flange Adapters
(Elongated)
SDR 11 (STANDARD DIMENSION RATIO) 160
PSI (WORKING PRESSURE AT 73.4°F)
NOMINAL
DIAMETER
3/4” IPS
1” IPS
1 1/4” IPS
1 1/2” IPS
2” IPS
3” IPS
4” IPS
6” IPS
8” IPS
10” IPS
12” IPS
A (IN)
OD
1.05
1.315
1.66
1.9
2.375
3.5
4.5
6.625
8.625
10.75
12.75
B
C (IN) D (IN)
(IN)
1.85
0.39
4.02
2.36
0.39
4.02
2.8
0.39
4.02
3.15
0.39
4.02
3.94
0.55
6.1
5
0.67
6.1
6.61
0.79
6.1
8.5
1.02
8.07
10.63 1.26
10.67
12.99 1.38
11.5
15.75
1.5
10.83
E (IN) WEIGHT
WALL
(LBS)
0.095
0.07
0.119
0.11
0.151
0.16
0.173
0.12
0.216
0.48
0.318
0.93
0.409
1.66
0.603
4.07
0.785
8.73
0.978
14.11
1.16
19.88
SDR 17 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4°F)
NOMINAL DIAMETER
2” IPS
3” IPS
4” IPS
6” IPS
8” IPS
10” IPS
12” IPS
A (IN) OD
2.375
3.5
4.5
6.625
8.625
10.75
12.75
B (IN)
3.94
5
6.61
8.5
10.63
12.99
15.75
C (IN)
0.55
0.67
0.79
1.02
1.02
1.18
1.38
D (IN)
6.1
6.1
6.1
8.07
10.67
11.5
10.83
E (IN) WALL WEIGHT (LBS)
0.14
0.37
0.206
0.71
0.264
1.27
0.39
3.02
0.508
6.02
0.633
10.06
0.75
14.17
Molded of PE 100/4710/3408 Black
www.fabcoplastics.com
4
5
6
7
8
9
10
1-51
HDPE FITTINGS
1
Ductile Iron Backing Rings
Conventional Cross Section in Ductile Iron
2
• Description: A conventional cross section (reduced section
modulus) in ductile iron.
• Utilization: A back-up ring for IPS or APR connections. Buttweld
or integrally flared stub-ends.
• Materials: Cast in ductile iron A536. Tensile strength 80,000 psi,
yield 55,000 psi, elongation 6%.
• Dimensions: Vital dimensions AWWA C207, Mates with ANSI
B16.5, B16.47; AWWA C207.
• Finish: Red oxide primer, hot dipped galvanized
3
PIPE DIAMETER
1"
1 1/4"
1 1/2"
2"
3"
4"
6"
8"
10"
12"
4
5
OD
3.5
4.63
5.0
6.0
7.5
9.0
11.0
13.5
16.0
19.0
FLANGE THICKNESS
0.44
0.5
0.5
0.5
0.5
0.56
0.63
0.63
0.63
0.75
Butt Reducers
6
BOLT #
4
4
4
4
4
8
8
8
12
12
BOLT HOLE DIAMETER BOLT CIRCLE
0.63
2.38
0.63
3.5
0.63
3.88
0.75
4.75
0.75
6.0
0.75
7.50
0.88
9.5
0.88
11.75
1.0
14.25
1.0
17.0
(Concentric Elongated)
SDR 17 (STANDARD DIMENSION RATIO) 100 PSI
(WORKING PRESSURE AT 73.4°F)
NOMINAL
A
B
C
DIAMETER (IN) (IN) (IN)
7
3 x 2” IPS
4 x 2 ” IPS
4 x 3” IPS
6 x 3” IPS
6 x 4” IPS
8 x 6” IPS
10 x 8” IPS
12 x 8” IPS
12x10” IPS
8
7.87
9.06
9.06
11.42
11.42
12.8
14.37
16.54
16.54
3.94
4.33
4.33
5.12
5.12
6.1
6.25
7.09
7.09
2.95
2.95
3.94
3.94
4.33
5.12
5.813
6.1
6.69
D
(IN)
WALL
0.206
0.264
0.264
0.39
0.39
0.508
0.75
0.75
0.75
E
(IN)
OD
2.375
2.375
3.5
3.5
4.5
6.625
8.625
8.625
10.75
F
(IN)
OD
3.5
4.5
4.5
6.625
6.625
8.625
10.75
12.75
12.75
G
WEIGHT
(IN)
(LBS)
WALL
0.14
0.47
0.14
0.8
0.206
0.94
0.206
2.18
0.264
2.39
0.39
4.92
0.508
10.21
0.508
12.82
0.633
14.43
SDR 11 (STANDARD DIMENSION RATIO) 160 PSI (WORKING PRESSURE AT 73.4°F)
NOMINAL
DIAMETER
2 x 1 ” IPS
3 x 2” IPS
4 x 2” IPS
4 x 3” IPS
6 x 3” IPS
6 x 4 ” IPS
8 x 6” IPS
10 x 8” IPS
12 x 8” IPS
12 x 10” IPS
9
10
ID
0.91
1.72
1.97
2.75
3.56
4.56
6.75
8.75
10.88
12.88
A (IN)
B (IN)
C (IN)
6.5
7.87
9.06
9.06
11.42
11.42
12.8
14.37
16.54
16.54
2.95
3.94
4.33
4.33
5.12
5.12
6.1
6.25
7.09
7.09
2.64
2.95
2.95
3.94
3.94
4.33
5.12
5.875
6.1
6.69
D (IN) WALL E (IN) OD F (IN) OD
0.216
0.318
0.409
0.409
0.603
0.603
0.785
1.16
1.16
1.16
1.9
2.375
2.375
3.5
3.5
4.5
6.625
8.625
8.625
10.75
2.375
3.5
4.5
4.5
6.625
6.625
8.625
10.75
12.75
12.75
G (IN) WALL
WEIGHT (LBS)
0.173
0.216
0.216
0.318
0.318
0.409
0.603
0.785
0.785
0.978
0.29
0.7
1.21
1.41
3.21
3.54
7.31
14.45
19.11
21.66
Molded of PE 100/4710/3408 Black
1-52
Toronto, Edmonton, Saskatoon, Vancouver, Montreal
HDPE FITTINGS
Butt Tees
(Elongated)
SDR 11 (STANDARD DIMENSION RATIO) 100 PSI
(WORKING PRESSURE AT 73.4°F)
NOMINAL
DIAMETER
3/4” IPS
1” IPS
1 1/4” IPS
1 1/2” IPS
2” IPS
3” IPS
4” IPS
6” IPS
8” IPS
10” IPS
12” IPS
A (IN) B (IN) C (IN) D (IN) E (IN)
5
5.67
6.61
7.99
8.66
11.81
13.78
18.11
23.62
27.56
31.57
2.5
2.83
3.31
4
4.33
5.91
6.89
9.06
11.81
13.78
15.97
0.095
0.119
0.151
0.173
0.216
0.318
0.409
0.603
0.785
0.978
1.16
1.05
1.315
1.66
1.9
2.375
3.5
4.5
6.625
8.625
10.75
12.75
1.77
1.77
2.01
2.52
2.48
3.54
3.94
4.72
5.71
6.3
7.52
WEIGHT
(LBS)
0.09
0.17
0.3
0.47
0.82
2.18
4.02
10.91
24.61
42.6
67.85
SDR 17 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4°F)
NOMINAL DIAMETER
2” IPS
3” IPS
4” IPS
6” IPS
8” IPS
10” IPS
12” IPS
A (IN)
8.66
11.81
13.78
18.11
23.62
27.56
31.57
B (IN)
4.33
5.91
6.89
9.06
11.81
13.78
15.97
C (IN)
0.14
0.206
0.264
0.39
0.508
0.633
0.75
D (IN)
2.375
3.5
4.5
6.625
8.625
10.75
12.75
E (IN)
2.48
3.54
3.94
4.72
5.71
6.3
7.52
WEIGHT (LBS)
0.53
1.45
2.58
7.24
16.6
28.9
45.32
PIPE NOMINAL NOMINAL NOMINAL NOMINAL
OD
L
D
D1
T
.63"
2.953
1.22
1.398
1.476
1.05"
3.189
1.417
1.496
1.594
1.315"
3.504
1.732
1.654
1.752
1.66"
3.898
2.087
1.811
1.949
1.9"
4.37
2.638
2.008
2.185
2.375"
5
3.13
2.185
2.5
3.5"
5.551
4.33
2.835
2.736
4.5"
5.98
5.55
3.307
2.95
6.625"
7.126
8.11
4.39
3.52
8.625"
9.094
10.551
5.433
4.469
10.75"
12.75"
(Fiber Reinforced)
STEEL INSERT, INJECTION MOLDED, HIGH STIFFNESS,
DIMENSIONAL AND HEAT STABILITY
PIPE
D
D2
D3
B
OD (MM-IN)
DIAMETER
(IN) (IN) (IN) (IN)
1/2"
20 - 1/2" - MOP 160 psi
3.74
0.63 1.102 0.472
3/4"
25 - 3/4" - MOP 160 psi
4.016 0.63 1.339 0.472
1"
32 - 1" - MOP 160 psi
4.488 0.630 1.654 0.630
1 1/4"
40 - 1 1/4" - MOP 160 psi
5.118 0.630 2.008 0.630
1 1/2"
50 - 1 1/2" - MOP 160 psi
5.236 0.630 2.441 0.709
2"
63 - 2" - MOP 160 psi
6.378 0.787 3.071 0.709
2 1/2"
75-2 1/2"- MOP 160 psi
7.244 0.787 3.622 0.709
3"
90 - 3" - MOP 160 psi
7.638 0.787 4.370 0.709
4"
110/125 - 4" - MOP 160 psi 9.015 0.787 5.236 0.709
6"
160 - 6" - MOP 160 psi
11.141 0.866 7.008 0.945
8"
200/225 - 8" - MOP 160 psi 13.582 0.866 9.291 0.945
10"
250 - 10" - MOP 160 psi
16.22 0.984 11.339 1.063
12"
315 - 12" - MOP 160 psi
19.17 0.984 13.307 1.260
www.fabcoplastics.com
3
4
5
SDR 17-7.4 PE 100/4710 BLACK. MOP WATER
160PSI / GAS 100PSI INJECTION MOLDED.
PP Gray Steel Backing Ring ANSI
2
Molded of PE 100/4710/3408 Black
Electro-Fusion Coupler
NOMINAL
SIZE DA (OD)
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
3"
4"
6"
8"
10"
12"
1
6
7
8
K
(IN)
2.38
2.75
3.120
3.500
3.880
4.750
5.500
6.000
7.500
9.500
11.750
14.250
17.000
9
10
1-53

Similar documents

+gf+ fuseal ii fittings

+gf+ fuseal ii fittings (HDPE S X FEMALE UNION NUT)

More information