Product Catalogue 2010

Transcription

Product Catalogue 2010
www.i-valo.com
Table of contents
1
Luminaires for homes and public buildings
Pro luminaires
Pendant luminaires Pro 550, 551 . . . . . . . . . . . . . . . . . . . . . . .
Pendant luminaires Pro 560, 561 . . . . . . . . . . . . . . . . . . . . . . .
Wall/ceiling luminaire Pro 570, Ceiling luminaires Pro 571, 575, 576
Recessed luminaires Pro 580, 581 . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.16
.18
.20
.22
Solline luminaires
Solline 735, 745 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Globe luminaires
Globe luminaires 503, 532, 661, 666, 667 . . . . . . . . . . . . . . . . . . . . . . . .30
Globe luminaires with suspension rod or cable . . . . . . . . . . . . . . . . . . . .32
www.i-valo.com
Sol luminaires
Sol 770, 773 . . . . . . .
Sol 775, 775HF . . . . .
Sol 780, 780W, 782LED
Sol Accessories . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.36
.38
.40
.41
Duo luminaires
Duo house number and wall luminaires 810, 812, 815 . . . . . . . . . . . . . . .44
Iittala bollards
Iittala bollards 687, 688, 689, 788 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Marine bollard 688 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Beo bollards
Beo bollards 880, 881, 882, 883 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Table of contents
2
Industrial luminaires
ViVO lowbays 9309, 9319, 9329, 9339 . . . . . . . . . . . . . . . . . . . . . . . . . .58
Lowbays 6201, 6211, 6221 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Lowbay 6231 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Laxus lowbays 9231, 9241 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Fluorescent luminaires (T5) 9441, 9451 . . . . . . . . . . . . . . . . . . . . . . . . .68
Fluorescent safety luminaire (T5) 9441.800. . . . . . . . . . . . . . . . . . . . . . .70
Fluorescent luminaires (T8) 6431, 6441 . . . . . . . . . . . . . . . . . . . . . . . . .72
LED Exit sign and emergency luminaire 9701 . . . . . . . . . . . . . . . . . . . . .74
Horizontal luminaires 6233, 6243, 6263 . . . . . . . . . . . . . . . . . . . . . . . . .76
Floodlights and crane luminaires 6237, 6247, 6267 . . . . . . . . . . . . . . . . .80
Regular luminaires 6232, 6242 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Hood luminaire 6126 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Ballast boxes 6058, 6059 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Industrial spotlights 6207, 6307, 6317 . . . . . . . . . . . . . . . . . . . . . . . . .86
www.i-valo.com
3
ATEX-luminaires
Classification of ATEX zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
ATEX II 2 D Lowbays EX6211, EX6221 . . . . . . . . . . . . . . . . . . . . . . . . . .90
ATEX II 2 D Lowbays EX9231, EX9241 . . . . . . . . . . . . . . . . . . . . . . . . . .91
ATEX II 2 D Regular luminaires EX6232, EX6242 . . . . . . . . . . . . . . . . . . . .92
ATEX II 2 D Fluorescent luminaires (T5) EX9441, EX9451 . . . . . . . . . . . . . .93
ATEX II 2 GD Fluorescent luminaires EX9551, EX9561 . . . . . . . . . . . . . . . .94
ATEX rating plate markings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Brackets for industrial luminaires. . . . . . . . . . . . . . . . . . . . . . . . . . .96
Track mounting system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
We reserve all rights regarding technical modifications and errors.
I-Valo
Energy-efficient light
I-Valo manufactures indoor and outdoor luminaires for all kinds of
applications in factories, as well as in homes and public buildings.
I-Valo's services range from light planning to luminaires ready for
installation. The solutions are based on decades of experience,
active product development and modern production technology.
The operations are also controlled by standardised quality and
environmental systems.
Improved production technology has resulted in extremely durable,
energy-efficient and easy-to-maintain luminaires. Planning and
implementing the most reasonable solution from the point of
view of the life cycle requires strong expertise. I-Valo is an expert in
lighting solutions.
• I-Valo Ltd was founded in 1971 to develop,
manufacture and market luminaires.
• The company’s product range comprises industrial
luminaires, as well as luminaires for homes and public
buildings.
I-Valo has manufactured luminaires since 1971. During
a nearly 40 year period, it has delivered thousands of
different lighting solutions to all kinds of applications.
The starting point of the solutions to be implemented
is always based on customer need, and I-Valo's experts
plan all solutions with energy-efficiency, appropriateness
and external appearance in mind.
Correct lighting contributes to well-being and is part
of a company's effective operation. I-Valo continuously
develops its products in cooperation with its customers
and partners.
I-Valo's modern production technology provides many
different options and combinations by means of which
individual and creative packages can be tailored from
standard products at competitive prices.
Lighting systems are developing all the time. New
technology ensures more energy-efficient and longer-
• Over half of I-Valo's production is exported. I-Valo has
sales offices in Austria and France, and a representative
office in Russia.
• I-Valo Ltd belongs to the Schneider Electric Group.
lasting products that are also easier to maintain. I-Valo
stays up-to-date and, thanks to its active product
development, is able to quickly incorporate the latest
technology.
I-Valo has certified quality and environmental
systems (SFS ISO 9001and SFS ISO 14001). As a result,
operations are consistent and of uniform quality.
Thanks to our operating policy, our customers can
rely on the fact that all promises are kept and that the
product is a safe solution, suitable for its purpose and
will function reliably for years.
The roots of I-Valo's luminaire design extend to the
famous Iittala glass factory, which is located only a stone's
throw away from the I-Valo factory. Design is an important
part of I-Valo's products and more and more emphasis is
placed on it. I-Valo's production plant is located in Iittala,
within the Hämeenlinna municipality. A significant part of
production is exported around the world.
Energy-efficiency for demanding
operating conditions
I-Valo wishes to offer its customers lighting solutions
with affordable life-cycle costs.
In the example below, the lighting level of Wibe
AB's factory in Sweden was almost tripled by
replacing the old luminaires with high-quality I-Valo
luminaires. Despite this, energy savings of 20% were
achieved. If the lighting level had been kept the
same, switching to I-Valo luminaires would have
generated a 60% energy saving for the customer. By
increasing the lighting level, the company achieved
better occupational safety and comfort in addition
to energy savings.
Production and storage area for the metal
industry
View of production area before renovation
- Lighting level before renovation 150–200 lx
- Luminaire 400 W
- Mercury-vapour lamps (QE) in use
- Installation height: 6.5 m
- Desire to preserve old luminaire lines
It was decided to implement the renovation by
means of closed 400 W Laxus luminaires equipped
with filters:
- Luminaire 400 W, dust filter
- Metal halide lamps (MT)
- Installation height: 6.5 m
- Old luminaire lines exploited
View of production area after renovation
9 000
8 000
7 000
6 000
5 000
4 000
3 000
2 000
1 000
0
600 lx
500 lx
400 lx
300 lx
200 lx
100 lx
Before
renovation
After
renovation
0
Lighting level
- Lighting level nearly tripled (500 lx)
- Occupational safety increased
- Annual energy-saving 20%
Energy costs
Energy costs and lighting levels
Filter technology
Filter technology and the highbay dust rims prevent luminaires from becoming dirty
and reduce maintenance needs. When these features are combined with a high light
output ratio (LOR) and an effective light source, there is no need to set the number of
required luminaires too high when calculating the lighting level of an application.
I-Valo's basic model is a closed, air-pressure tested luminaire equipped with an
effective filter that cleans the pressure equalisation air flowing into the luminaire.
Thus, the inside of the luminaire remains completely clean. The metal dust rim
surrounding the front glass creates under the glass an air cushion that prevents
the glass from becoming dirty due to external impurities. Together, these
features ensure that the luminosity of the luminaire is maintained even in difficult
operating conditions.
Dust filter
I-Valo's lowbays, fluorescent luminaires
and regular luminaires are equipped
with dust filters that filter dust particles
and impurities larger than 0.01 µm.
Double-effect filter
I-Valo's horizontal luminaires and
floodlights are equipped with a
double-effect filter. In addition to
dust, the double-effect filter also
filters caustic gases.
Goretex filter
The Gore filter filters water and dust
and effectively protects luminaires
from impurities.
Lighting planning
Familiarity with the premises and processes of different branches
of business is a prerequisite for optimal lighting planning.
I-Valo's employees have strong experience in planning different
demanding lighting projects for both indoor and outdoor spaces.
Advantages of smart
lighting planning
- Lighting optimised according to the needs and
requirements of the area/process to be lit.
- Solution with affordable life-cycle costs
- Energy, installation and maintenance costs
as low as possible
- Luminaire placement according to the needs of
maintenance and use
3D lighting plans
I-Valo PlugIn
I-Valo uses the independent DIALux lighting planning
programme, which does not depend on luminaire
manufacturers and makes the visualisation of lighting
plans possible.
I-Valo has been a DIALux partner since 2006. In the
programme, it uses 3D models for its luminaires.
The models make the placement and orientation
of the luminaires easier.
As a result of visualised lighting calculation results,
the effects of different solutions and options are
easily evaluated. A CAD layout in DXF or DWG format
can be imported in the programme to facilitate the
placement of lighting-affecting fittings, process
devices, maintenance platforms, stairways, etc.
The light distribution files (PlugIn) and their update
packages can be downloaded at www.i-valo.com
under DIALux in the Main Menu.
The results of a complete lighting plan can be
visualised in a 3D view at different levels. The lighting
planning software can be downloaded free of charge
at www.dial.de
The 3D view can be used to check
the placement and orientation of
luminaires.
The CAD layout accelerates the
placement of structures and devices.
The False Colour printout
shows how light is distributed
to the space.
The 3D view visualises the
placement of luminaires.
The lighting of all levels can
be included in the lighting
calculations for the space
The luminaire image, power, lamp
and light distribution can be found
under the Luminaire Menu.
1
Luminaires for homes and
public buildings
I-Valo's luminaires for homes and public buildings have been developed in cooperation
with customers in order to meet market requirements. Environmental friendliness
and a timeless design suitable for many different buildings make I-Valo's luminaires
an excellent choice for lighting all kinds of buildings. Installability, serviceability, good
lighting properties and energy-efficiency are essential features of I-Valo's luminaires.
12
Pro luminaires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Solline luminaires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Globe luminaires. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Sol luminaires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Duo luminaires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Iittala bollards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Beo bollards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
13
1
Pro luminaires
The design of the Pro luminaire series is suitable for homes and public
buildings and is ideal for both high and low spaces. Efficient compact
fluorescent lamps are used in the luminaires. The Pro luminaire series
consists of pendant luminaires, recessed luminaires, ceiling luminaires
and wall luminaires of different sizes. The fact that Pro luminaires are
available with different light distributions and controls means increased
versatility.
14
All Pro luminaires contain electronic control gears (HF) or
dimmable electronic control gears (HFDIM). Dimmable
luminaires are controlled by an analogue 1–10V DC
controller. Also available with dimmable digital ballasts.
Different light distribution solutions of luminaires of the
same size have been implemented using different diffusers
or combinations of them that can be modified even after
installation.
Pro luminaires are excellent for demanding lighting solutions
both together with and as individual luminaires.
15
Pro luminaires
Pendant luminaires Pro 550, 551 . . .
Pendant luminaires Pro 560, 561 . . .
Wall/ceiling luminaire Pro 570 and
Ceiling luminaires Pro 571, 575, 576 .
Recessed luminaires Pro 580, 581 . .
. . . . . . . . 16
. . . . . . . . 18
. . . . . . . . 20
. . . . . . . . 22
1
Pendant luminaires Pro 550, 551
Structure
Pro 550 and 551 illuminate up and
down, and are efficient pendant
luminaires for 2 x 36 W compact
fluorescent lamps.
The luminaires are suitable for general
and work-area lighting in public and
business buildings, as well as home
construction.
Possible applications include high
spaces, entrance halls, assembly
halls and other similar spaces. The
luminaires can be installed on pitched
ceilings without additional parts.
High light output ratios (LOR) and
different light distribution alternatives
provide a solution for lighting needs
when different suspension heights are
used and the purposes change. For
example, when equipped with a grey
honeycomb louvre, this luminaire can
be used to easily achieve glareless
lighting in required spaces.
The luminaires contain an electronic
control gear or a dimmable electronic
control gear (analogue dimming).
- Frame diameter 470 mm, height 92 mm,
lamps 2 x FSS-E-36-2G10
- Diffuser frame and ceiling canopy of polyestercoated aluminium. Colours: white (RAL9016) or grainsurfaced aluminium grey (RAL9006)
- Mounting plate and luminaire body of steel with
white finish
- Lower diffuser of opal acrylic plate or aluminium
honeycomb louvre with white or grey finish
- Upper diffuser of perforated steel plate with white
finish or without upper diffuser
- Steel suspension wires, 3 pcs, length 2.0 m. Friction
locks on top of the luminaire.
- White suspension cable MSK 5 x 0.75 mm²,
length 2.0 m
- Electronic control gear (HF) or dimmable electronic
control gear (HFDIM) with a 1–10 V DC controller
Installation
- Suspended installation on ceiling or pitched ceiling
- Fastens to the ceiling surface with a mounting plate that remains inside the ceiling canopy.
The plate contains key holes with a hole-to-hole distance of 78 mm.
- Length of suspension wires from ceiling are about 0.1–2.0 m. The length can be adjusted
without any tools, using incorporated friction locks.
- The suspension cable is measured to be slightly longer than the wires
Connection
- Connectors -o- 3 x 2.5 mm2, for recessed box (flush or surface mounting)
- Connectors -o- 2 x 2.5 mm², for 1–10 V DC control wires
- Terminal blocks in the mounting plate, screw fixing
16
More information
- Frame, ceiling canopy and aluminium honeycomb louvres also available in
other RAL colours upon order
- Also with digital ballasts (e.g., DALI or SwitchDim ballasts) upon order
- Also with longer suspension or of a certain length upon order
PRODUCT CODE
COLOUR/OPTICS
LIGHT SOURCE
WEIGHT, KG
550 Opal acrylic plate, with upper diffuser
550.000.00 HF
white/opal
2 x FSS-E-36-2G10
550.500.00 HF
aluminium grey/opal
2 x FSS-E-36-2G10
550.000.00 HFDIM
white/opal
2 x FSS-E-36-2G10
550.500.00 HFDIM
aluminium grey/opal
2 x FSS-E-36-2G10
550 Opal acrylic plate, without upper diffuser
550.000.20 HF
white/opal
2 x FSS-E-36-2G10
550.500.20 HF
aluminium grey/opal
2 x FSS-E-36-2G10
550.000.20 HFDIM
white/opal
2 x FSS-E-36-2G10
550.500.20 HFDIM
aluminium grey/opal
2 x FSS-E-36-2G10
551 Aluminium white honeycomb louvre, with upper diffuser
551.000.00 HF
white/white
2 x FSS-E-36-2G10
551.500.00 HF
aluminium grey/white
2 x FSS-E-36-2G10
551.000.00 HFDIM
white/white
2 x FSS-E-36-2G10
551.500.00 HFDIM
2 x FSS-E-36-2G10
551 Aluminium white honeycomb louvre, without upper diffuser
551.000.20 HF
white/white
2 x FSS-E-36-2G10
551.500.20 HF
2 x FSS-E-36-2G10
551.000.20 HFDIM
white/white
2 x FSS-E-36-2G10
551.500.20 HFDIM
2 x FSS-E-36-2G10
551 Aluminium grey honeycomb louvre, with upper diffuser
551.050.00 HF
white/grey
2 x FSS-E-36-2G10
551.550.00 HF
aluminium grey/grey
2 x FSS-E-36-2G10
551.050.00 HFDIM
white/grey
2 x FSS-E-36-2G10
551.550.00 HFDIM
aluminium grey/grey
2 x FSS-E-36-2G10
551 Aluminium grey honeycomb louvre, without upper diffuser
551.050.20 HF
white/grey
2 x FSS-E-36-2G10
551.550.20 HF
aluminium grey/grey
2 x FSS-E-36-2G10
551.050.20 HFDIM
white/grey
2 x FSS-E-36-2G10
551.550.20 HFDIM
aluminium grey/grey
2 x FSS-E-36-2G10
3.6
3.6
3.6
3.6
3.0
3.0
3.0
3.0
3.1
3.1
3.1
3.1
2.5
2.5
2.5
2.5
3.1
3.1
3.1
3.1
2.5
2.5
2.5
2.5
Light distribution
17
1
Pendant luminaires Pro 560, 561
Structure
Pro 560 and 561 illuminate up and
down and are extremely efficient
pendant luminaires for 4 x 36 W
compact fluorescent lamps.
The luminaires are suitable for general
and work-area lighting in public and
business buildings, as well as home
construction.
Possible applications include high
spaces, entrance halls, assembly
halls and other similar spaces. The
luminaires can be installed on pitched
ceilings without additional parts.
High light output ratios (LOR) and
provide a solution for lighting needs
when different suspension heights are
used and the purposes change. For
example, when equipped with a grey
honeycomb louvre, this luminaire can
be used to easily achieve glareless
lighting in required spaces.
The luminaires contain electronic or
dimmable electronic control gears
(analogue dimming).
lamps 4 x FSD-E-36-2G11
- Diffuser frame and ceiling canopy of polyestercoated aluminium. Colours: white (RAL9016) or
grain-surfaced aluminium grey (RAL9006)
- Mounting plate and luminaire body of steel with
white finish
- Lower diffuser of opal acrylic plate or aluminium
honeycomb louvre with white or grey finish
- Upper diffuser of perforated steel plate with white
finish or without upper diffuser
- Steel suspension wires, 3 pcs, length 2.0 m.
Friction locks on top of the luminaire.
- White suspension cable MSK 5 x 0.75 mm²,
length 2.0 m
- Two electronic control gears (HF) or two dimmable
electronic control gears (HFDIM)
with a 1–10 V DC controller
Installation
- Suspended installation on ceiling or pitched ceiling
- Fastens to the ceiling surface with a mounting plate that remains inside the ceiling canopy.
The plate contains key holes with a hole-to-hole distance of 78 mm.
- Length of suspension wires from ceiling is about 0.1–2.0 m. The length can be adjusted
without any tools, using incorporated friction locks.
- The suspension cable is measured to be slightly longer than the wires
Connection HF
- Connectors -o- 5 x 2.5 mm2 for recessed box (flush or surface mounting)
- Pre-wired for chandelier switching (2+2)
Connection HFDIM
- Connectors -o- 3 x 2.5 mm2, for recessed box (flush or surface mounting)
18
More information
- Frame, ceiling canopy and aluminium honeycomb louvres also available in
other RAL colours upon order
- Also with longer suspension or suspension of a certain length upon order
PRODUCT CODE
COLOUR/OPTICS
LIGHT SOURCE
WEIGHT, KG
560 Opal acrylic plate, with upper diffuser
560.000.00 HF
white/opal
4 x FSD-E-36-2G11
560.500.00 HF
aluminium grey/opal
4 x FSD-E-36-2G11
560.000.00 HFDIM
white/opal
4 x FSD-E-36-2G11
550.500.00 HFDIM
aluminium grey/opal
4 x FSD-E-36-2G11
560 Opal acrylic plate, without upper diffuser
560.000.20 HF
white/opal
4 x FSD-E-36-2G11
560.500.20 HF
aluminium grey/opal
4 x FSD-E-36-2G11
560.000.20 HFDIM
white/opal
4 x FSD-E-36-2G11
560.500.20 HFDIM
aluminium grey/opal
4 x FSD-E-36-2G11
561 Aluminium white honeycomb louvre, with upper diffuser
561.000.00 HF
white/white
4 x FSD-E-36-2G11
561.500.00 HF
4 x FSD-E-36-2G11
561.000.00 HFDIM
white/white
4 x FSD-E-36-2G11
561.500.00 HFDIM
4 x FSD-E-36-2G11
561 Aluminium white honeycomb louvre, without upper diffuser
561.000.20 HF
white/white
4 x FSD-E-36-2G11
561.500.20 HF
4 x FSD-E-36-2G11
561.000.20 HFDIM
white/white
4 x FSD-E-36-2G11
561.500.20 HFDIM
4 x FSD-E-36-2G11
561 Aluminium grey honeycomb louvre, with upper diffuser
561.050.00 HF
white/grey
4 x FSD-E-36-2G11
561.550.00 HF
aluminium grey/grey
4 x FSD-E-36-2G11
561.050.00 HFDIM
white/grey
4 x FSD-E-36-2G11
561.550.00 HFDIM
aluminium grey/grey
4 x FSD-E-36-2G11
561 Aluminium grey honeycomb louvre, without upper diffuser
561.050.20 HF
white/grey
4 x FSD-E-36-2G11
561.550.20 HF
aluminium grey/grey
4 x FSD-E-36-2G11
561.050.20 HFDIM
white/grey
4 x FSD-E-36-2G11
561.550.20 HFDIM
aluminium grey/grey
4 x FSD-E-36-2G11
5.8
5.8
5.8
5.8
4.7
4.7
4.7
4.7
4.9
4.9
4.9
4.9
3.8
3.8
3.8
3.8
4.9
4.9
4.9
4.9
3.8
3.8
3.8
3.8
Light distribution
19
1
Wall/ceiling luminaire Pro 570 — Ceiling luminaires Pro 571, 575, 576
Structure
The Pro 570 wall and ceiling luminaire
and Pro 571, 575, 576 ceiling
luminaires are efficient luminaires for
28 W or 38 W compact fluorescent
lamps.
The luminaires are suitable for use
for the general lighting of targets
in public, business and home
construction both in primary and
secondary spaces.
The high light output ratios (LOR),
and contrast-softening backlight
provide a solution for many lighting
needs.
lamp FSS-E-28-GR10q or FSS-E-38-GR10q
- Polyester-coated steel diffuser frame
- Colours: white (RAL9016) or grain-surfaced
aluminium grey (RAL9006)
- Steel luminaire body with white finish
- Diffuser with opal acrylic plate or aluminium
honeycomb louvre in white or grey finish
- Electronic control gear (HF) or dimmable
electronic control gear (HFDIM) with a 1–10 V DC
controller
Installation
- Surface mounting on the ceiling or a wall (570)
- The bottom of the luminaire contains key holes with a hole-to-hole distance of 78 mm
- Wire lead-in through the bottom or the backlight hole
- Diffuser/frame with magnetic mount, frame with fixed earthing wire
Connection
- Connectors -o- 3 x 2.5 mm², for recessed box (flush or surface mounting)
- Terminal blocks in the luminaire body, screw fixing
More information
- Frame and aluminium honeycomb louvres also available in other RAL colours upon order
20
PRODUCT CODE
COLOUR/OPTICS
570 Wall and ceiling luminaire, opal acrylic plate
570.000.00 HF
white/opal
570.500.00 HF
aluminium grey/opal
571 Ceiling luminaire, white honeycomb louvre
571.000.00 HF
white/white
571.500.00 HF
571 Ceiling luminaire, grey honeycomb louvre
571.050.00 HF
white/grey
571.550.00 HF
aluminium grey/grey
575 Ceiling luminaire, opal acrylic plate
575.000.00 HF
white/opal
575.500.00 HF
aluminium grey/opal
575.000.00 HFDIM
white/opal
575.500.00 HFDIM
aluminium grey/opal
576 Ceiling luminaire, white honeycomb louvre
576.000.00 HF
white/white
576.500.00 HF
576.000.00 HFDIM
white/white
576.500.00 HFDIM
576 Ceiling luminaire, grey honeycomb louvre
576.050.00 HF
white/grey
576.550.00 HF
aluminium grey/grey
576.050.00 HFDIM
white/grey
576.550.00 HFDIM
aluminium grey/grey
LIGHT SOURCE
WEIGHT, KG
FSS-E-28-GR10q
FSS-E-28-GR10q
1.9
1.9
FSS-E-28-GR10q
FSS-E-28-GR10q
1.7
1.7
FSS-E-28-GR10q
FSS-E-28-GR10q
1.7
1.7
FSS-E-38-GR10q
FSS-E-38-GR10q
FSS-E-38-GR10q
FSS-E-38-GR10q
1.9
1.9
1.9
1.9
FSS-E-38-GR10q
FSS-E-38-GR10q
FSS-E-38-GR10q
FSS-E-38-GR10q
1.7
1.7
1.7
1.7
FSS-E-38-GR10q
FSS-E-38-GR10q
FSS-E-38-GR10q
FSS-E-38-GR10q
1.7
1.7
1.7
1.7
Light distribution
21
1
Recessed luminaires Pro 580, 581
Structure
Pro 580 and 581 are recessed
luminaires for 2 x 24 W compact
fluorescent lamps.
Installability to a recessed depth of
40–130 mm, the different ballast
alternatives and the light distribution
options given by alternative diffusers
provide functioning lighting solutions
for the different needs of public,
business and home construction.
The dimesions of luminaires 580 and
581 are suitable for the 600 x 600
module and are also an excellent
choice of luminaire for many
suspended ceiling solutions in both
renovated and new buildings.
- Frame diameter 470 mm, flush mounting frame
diameter 544 mm, luminaire height 120 mm, lamps
2 x FSD-E-24-2G11
- Aluminium diffuser frame and flush mounting
polyster-coated steel frame. Colours: white (RAL9016)
or grain-surfaced aluminium grey (RAL9006)
- Luminaire steel bottom with white finish
- Diffuser with opal acrylic plate or aluminium
honeycomb louvre in white or grey finish
- Electronic control gear (HF) or dimmable electronic
control gear (HFDIM) with a 1–10 V DC controller
Installation
- Flush mounting on the ceiling
- Recessed light hole diameter 495 mm
- Recessed depth 40–130 mm, with a recessed depth of 120 mm the lower surface of the
luminaire is at the same level as the ceiling
- Fastens from the bottom of the luminaire, hole-to-hole distance for key holes 78 mm
- The trim ring is fastened to the ceiling board or the edges of the recessed light hole
Connection
- Connectors -o- 3 x 2.5 mm², for recessed box (flush mounting)
- Terminal blocks in the bottom of the luminaire, screw fixings
More information
- Frame, trim ring and honeycomb louvres also available in other RAL colours upon order
PRODUCT CODE
COLOUR/OPTICS
LIGHT SOURCE
BASE
WEIGHT, KG
2 x FSD-E-24-2G11
2 x FSD-E-24-2G11
2 x FSD-E-24-2G11
2 x FSD-E-24-2G11
2G11
2G11
2G11
2G11
3.6
3.6
3.6
3.6
2 x FSD-E-24-2G11
2 x FSD-E-24-2G11
2 x FSD-E-24-2G11
2 x FSD-E-24-2G11
2G11
2G11
2G11
2G11
3.6
3.6
3.6
3.6
580 Opal acrylic plate
580.000.00 HF
580.500.00 HF
580.000.00 HFDIM
580.500.00 HFDIM
white/opal
aluminium grey/opal
white/opal
aluminium grey/opal
581 Honeycomb louvre
581.000.00 HF
581.500.00 HF
581.000.00 HFDIM
581.500.00 HFDIM
white/white
white/white
22
Light distribution
23
1
Solline luminaires
Solline luminaires have been developed in cooperation with architects and
electrical designers. Timeless and classic shape, durable materials, glass and
metal and HF ballasts with their compact fluorescent lamps make Solline
luminaires a long-lasting and environmentally-friendly general luminaire
even for more demanding lighting tasks.
24
Excellent applications for surface-mounted Solline luminaires
include, for example, conference and meeting rooms, halls,
entrance halls, stairwells, corridors, offices, bedrooms, living
rooms, working spaces and dining areas.
Two size and power options. Colours: white (RAL 9016) or
grain-surfaced aluminium grey (RAL9006).
Solline luminaires are also available in the dimmable version
and with digital ballasts.
25
1
Solline 735, 745
Structure 735HF
The versatile Solline compact
fluorescent lamp luminaire is suitable
for homes and public buildings (both
renovated and new).
Timeless design, power and size
options (2 x 18 W, Ø 350 mm or
2 x 24 W, Ø 450 mm), electronic
control gear, opal glass diffuser for
even surface luminance, steel body
and aluminium frame are properties
that make this luminaire a durable
solution even for more demanding
environments.
The luminaires are suitable for use
in dry spaces, also low ones. Due to
their design, materials and colour
options, excellent applications include
conference and meeting rooms, halls,
entrance halls, corridors, stairwells,
offices, bedrooms and living rooms,
working spaces and dining areas.
In alternative, 2 x 24 W luminaires may
also be equipped with a dimmable
electronic control gear with analogue
1–10 V DC controller.
- Luminaire diameter 350 mm, height 82 mm
- Polyester-coated steel bottom with white finish
- Diffuser with frosted multi-layer opal glass
- Polyester-coated spun aluminium diffuser frame, colours: white
(RAL9016) or grain-surfaced aluminium grey (RAL9006)
- Compact fluorescent lamps: 2 pcs FSD-18-E-2G11
- Additional metallic supports for lamps
- Electronic control gear
Structure 745HF and 745HFDIM
- Bottom of polyester-coated steel with white finish
- Diffuser of frosted multi-layer opal glass
- Polyester-coated spun aluminium diffuser frame, colours: white
(RAL9016) or grain-surfaced aluminium grey (RAL9006)
- Compact fluorescent lamps: 2 pcs FSD-24-E-2G11
- Additional metallic supports for lamps
- Electronic control gear (HF)
- Dimmable electronic control gear (HFDIM) with a 1–10 V DC
controller
Installation
- Surface mounting on a ceiling or wall
- With a spacing ring for surface mounting
- Fastens from the key holes of the bottom, with a hole-to-hole distance 78 mm
- Cable lead-ins in the bottom
- The diffuser/frame is fastened to the bottom through right-hand bayonet fittings
Solline luminaires are also available
with digital or dimmable digital
ballasts (e.g., DALI or SwitchDim
ballasts) upon order.
Safety lighting versions are also
available for some luminaires.
26
Connection
- Connectors -o- 3 x 2.5 mm2 for recessed box (flush mounting)
- Connectors -o- 2 x 2.5 mm2 for control wires (HFDIM)
- Terminal blocks in the bottom of the luminaire
More information
- Spacing ring 7014 as an accessory (735) for surface mounting
- Spacing ring 7015 as an accessory (745) for surface mounting
- Also available with digital ballasts upon order
PRODUCT CODE
COLOUR/OPTICS
735 HF, Ø 350 mm, 2 x 18 W
735.000HF
white/opal glass
735.500HF
aluminium grey/opal glass
745 HF, Ø 450 mm, 2 x 24 W
745.000HF
white/opal glass
745.500HF
745 HFDIM, Ø 450 mm, 2 x 24 W, dimmable
745.000HFDIM
white/opal glass
745.500HFDIM
PRODUCT CODE
Spacing ring
7014.000
7015.000
LIGHT SOURCE
WEIGHT, KG
2 x FSD-18-E-2G11
2 x FSD-18-E-2G11
1.8
1.8
2 x FSD-24-E-2G11
2 x FSD-24-E-2G11
2.9
2.9
2 x FSD-24-E-2G11
2 x FSD-24-E-2G11
2.9
2.9
COLOUR/OPTICS
FOR LUMINAIRE
WEIGHT, KG
white
white
735
745
0.2
0.2
Light distribution
27
1
Globe luminaires
The design of the globe luminaire with opal glass diffuser is an absolute
classic in the luminaire world. Globe-shaped luminaires have been used
almost since the invention of the incandescent lamp and will continue to
be used as basic or decorative luminaires for all kinds of spaces, even when
incandescent lamps will no longer be in use. New and different light sources,
new ballasts and materials only widen the range of use of the luminaire.
28
Among the features of a globe luminaire with opal diffuser,
omnidirectionality is especially noteworthy. In most cases,
omnidirectionality can be seen as the uniformity of floor and
working surface lighting, as well as of wall or even ceiling
lighting. There are no strong luminosity differences that
disturb the eyes and vision is easier in all respects.
I-Valo's globe luminaires are available in four different sizes,
two different body colours and two different suspension
types (rod and cable). The light sources used are compact
fluorescent lamps equipped with electronic control gear
(also dimmable) and light sources according to the power
limitations and suitable for the E27 base.
29
Globe luminaires
Globe luminaires 503, 532, 661, 666, 667 . . . . . . 30
Globe luminaires with suspension rod or cable . . 32
1
Globe luminaires 503, 532, 661, 666, 667
Structure
The high light output ratio (LOR), classic
design style and durability of globe
luminaires make them an excellent
universal luminaire for new and
renovated buildings.
The luminaires are suitable for use in
dry spaces. Due to their design, light
distribution and materials, excellent
applications include, for example,
conference and meeting rooms, halls,
offices, bedrooms and living rooms,
working spaces and dining areas.
The luminaires consist of a body and a
frosted opal glass diffuser suitable for it.
In each body model, the dimensions of
the dome arc have been adapted to the
diameter of the diffuser belonging to
the luminaire.
- Steel body, dome and suspension rod
- Plastic ceiling canopy
- Colour of dome, suspension rod and ceiling canopy: white or chrome
- Steel suspension ring
- Standard length of suspension rod 500 mm
- Three-layer frosted opal glass diffuser
Luminaire Diffuser Lamp
model
Ø, mm holder
532
250
503
300
661HF
300
666HF
350
666HFDIM
350
667HF
400
667HFDIM
400
Light source
Incandescent lamp or equivalent,
max 75 W
Incandescent lamp or equivalent,
E27
max 100 W
G24q3
Compact fluorescent lamp 26 W,
FSQ-26-E-G24q3
2 x G24q3 2 x Compact fluorescent lamp 26 W,
FSQ-26-E-G24q3
FSQ-26-E-G24q3
Ballast
E27
FSQ-26-E-G24q3
FSQ-26-E-G24q3
Globe luminaires contain either an E27
lamp holder or an electronic control gear
and G24q3 lamp holders for 1 x 26 W or
2 x 26 W compact fluorescent lamps. A
dimmable electronic control gear for
2 x 26 W with analogue 1–10 V DC
controller is also available as an option.
The models equipped with an E27
lamp holder (503, 532) are also highly
suitable for other light sources than
incandescent lamps (e.g., halogen
lamps with an E27 base, LED lamps and
compact fluorescent lamps with their
own ballast).
30
Electronic
Electronic
Dimmable electronics, with
analogue 1–10 V DC controller
Electronic
Dimmable electronic, with
analogue 1–10 V DC controller
Light distribution
Installation
- Suspension mounting on the ceiling surface by means of a
suspension hook or a suspension cover
Connection
- Recessed box (flush or surface mounting)
- Suspension rod with free conductors 2 x 0.75 mm2 and connection screws for the earth
conductor 2.5 mm2
- Suspension rod with free conductors 4 x 0.75 mm2 and connection screws for the earth
conductor 2.5 mm2 (HFDIM)
More information
- Also available with suspension rods of specific sizes upon order (minimum 15 cm, then every 5 cm)
- Also available with an opal acrylic diffuser upon order
- Also available in other RAL colours upon order
PRODUCT CODE
COLOUR/OPTICS
LIGHT SOURCE
532, diffuser Ø 250 mm, max 75 W
532.000/H
white/frosted opal
max 75 W, E27
532.800/H
chrome/frosted opal
max 75 W, E27
503, diffuser Ø 300 mm, max 100 W
503.000/H
white/frosted opal
max 100 W, E27
503.800/H
chrome/frosted opal
max 100 W, E27
661HF, diffuser Ø 300 mm, compact fluorescent lamp 26 W
661.000HF/H
white/frosted opal
FSQ-26-E-G24q3
661.800HF/H
chrome/frosted opal
FSQ-26-E-G24q3
666HF, diffuser Ø 350 mm, compact fluorescent lamps 2 x 26 W
666.000HF/H
white/frosted opal
2 x FSQ-26-E-G24q3
666.800HF/H
chrome/frosted opal
2 x FSQ-26-E-G24q3
666HFDIM, diffuser Ø 350 mm, compact fluorescent lamps 2 x 26 W, dimmable
666.000HFDIM/H
white/frosted opal
2 x FSQ-26-E-G24q3
666.800HFDIM/H
chrome/frosted opal
2 x FSQ-26-E-G24q3
667HF, diffuser Ø 400 mm, compact fluorescent lamps 2 x 26 W
667.000HF/H
white/frosted opal
2 x FSQ-26-E-G24q3
667.800HF/H
chrome/frosted opal
2 x FSQ-26-E-G24q3
667HFDIM, diffuser Ø 400 mm, compact fluorescent lamps 2 x 26 W, dimmable
667.000HFDIM/H
white/frosted opal
2 x FSQ-26-E-G24q3
667.800HFDIM/H
chrome/frosted opal
2 x FSQ-26-E-G24q3
31
WEIGHT, KG
1.2
1.2
1.9
1.9
2.7
2.7
3.5
3.5
3.5
3.5
4.2
4.2
4.2
4.2
1
Globe luminaire bodies with suspension rod or cable
Structure, suspension rod
Globe luminaires use two different
body types: body with suspension rod
(rod standard length 500 mm) and
body with suspension cable equipped
with a 300 mm pipe and a 4 m white
suspension cable (MSK 3 x 1.0 mm2).
Two different diffusers, i.e., a frosted
opal glass diffuser and an impactresistant opal acrylic diffuser, can be
combined into the luminaire bodies.
The properties of the luminaire bodies
and the diffusers suitable for them are
shown in the annexed tables.
The product codes of both products
must always be given when ordering
the combination of luminaire body
and diffuser (e.g., 7666.800HFDIM +
8174.350.02 or 7503.000/SC +
4009.300.03).
The luminaires with diffusers are
suitable for use in all dry spaces. For
example, when equipped with an
opal acrylic diffuser, they withstand
even heavier use and, therefore, are
excellent options, for example, for daycare centres, schools and other similar
spaces.
- Plastic ceiling canopy
- Colour of dome, suspension rod and ceiling canopy:
white or chrome
- Standard length of suspension rod 500 mm
- Suitable diffusers in the annexed table
- Suitable lamps with their holders in the annexed table
- Dimmable electronic control gear with analogue
1–10 V DC controller (HFDIM)
Structure, suspension cable (/SC)
- Plastic ceiling canopy, white colour
- Colour of dome and suspension rod: white or chrome
- Length of suspension rod 300 mm
- White suspension cable, 4 m, MSK 3 x 1.0 mm2
- Suitable diffusers in the annexed table
- Suitable lamps with their holders in the annexed table
Connection
- Recessed box (flush or surface mounting)
- Suspension rod with free conductors 2 x 0.75 mm2 and connection screws for
the earth conductor 2.5 mm2
- Suspension rod with free conductors 4 x 0.75 mm2 and connection screws for
the earth conductor 2.5 mm2 (HFDIM)
- Suspension cable with free conductors 3 x 1.0 mm2
Installation
- Suspension mounting on the ceiling surface by means of a suspension hook or
a suspension cover
More information
- The luminaire bodies are delivered without luminaire plug
- Also available with suspension rods of specific size upon order
32
Globe luminaire bodies with a 500 mm suspension rod, ceiling canopy
of the same colour as the dome and the suspension rod
PRODUCT CODE
COLOUR
LIGHT SOURCE
SUITABLE DIFFUSERS
Glass diffuser
Plastic diffuser
7532, suitable diffuser Ø 250 mm, max 75 W
7532.000
white
max 75 W, E27
4009.250.03
8174.250.02
7532.800
chrome
max 75 W, E27
4009.250.03
8174.250.02
7503, suitable diffuser Ø 300 mm, max 100 W
7503.000
white
max 100 W, E27
4009.300.03
8174.300.02
7503.800
chrome
max 100 W, E27
4009.300.03
8174.300.02
7661HF, suitable diffuser Ø 300 mm, compact fluorescent lamp 26 W
7661.000HF
white
FSQ-26-E-G24q3
4009.300.03
8174.300.02
7661.800HF
chrome
FSQ-26-E-G24q3
4009.300.03
8174.300.02
7666HF, 7666HFDIM, suitable diffuser Ø 350 mm, compact fluorescent lamps 2 x 26 W
7666.000HF
white
2 x FSQ-26-E-G24q3
4009.350.03
8174.350.02
7666.800HF
chrome
2 x FSQ-26-E-G24q3
4009.350.03
8174.350.02
7666.000HFDIM
white
2 x FSQ-26-E-G24q3
4009.350.03
8174.350.02
7666.800HFDIM
chrome
2 x FSQ-26-E-G24q3
4009.350.03
8174.350.02
7667HF, 7667HFDIM, suitable diffuser Ø 400 mm, compact fluorescent lamps 2 x 26 W
7667.000HF
white
2 x FSQ-26-E-G24q3
4009.400.03
8174.400.02
7667.800HF
chrome
2 x FSQ-26-E-G24q3
4009.400.03
8174.400.02
7667.000HFDIM
white
2 x FSQ-26-E-G24q3
4009.400.03
8174.400.02
7667.800HFDIM
chrome
2 x FSQ-26-E-G24q3
4009.400.03
8174.400.02
Globe luminaire bodies with a 4 m suspension cable, white ceiling canopy
PRODUCT CODE
COLOUR
LIGHT SOURCE
SUITABLE DIFFUSERS
Glass diffuser
Plastic diffuser
7532/SC, suitable diffuser Ø 250 mm, max 75 W
7532.000/SC
white
max 75 W, E27
4009.250.03
8174.250.02
7532.800/SC
chrome
max 75 W, E27
4009.250.03
8174.250.02
7503/SC, suitable diffuser Ø 300 mm, max 100 W
7503.000/SC
white
max 100 W, E27
4009.300.03
8174.300.02
7503.800/SC
chrome
max 100 W, E27
4009.300.03
8174.300.02
7661HF/SC, suitable diffuser Ø 300 mm, compact fluorescent lamp 26 W
7661.000HF/SC
white
FSQ-26-E-G24q3
4009.300.03
8174.300.02
7661.800HF/SC
chrome
FSQ-26-E-G24q3
4009.300.03
8174.300.02
7666HF/SC, suitable diffuser Ø 350 mm, compact fluorescent lamps 2 x 26 W
7666.000HF/SC
white
2 x FSQ-26-E-G24q3
4009.350.03
8174.350.02
7666.800HF/SC
chrome
2 x FSQ-26-E-G24q3
4009.350.03
8174.350.02
7667HF/SC, suitable diffuser Ø 400 mm, compact fluorescent lamps 2 x 26 W
7667.000HF/SC
white
2 x FSQ-26-E-G24q3
8174.400.02
7667.800HF/SC
chrome
2 x FSQ-26-E-G24q3
8174.400.02
Glass and acrylic diffusers suitable for the globe luminaires
PRODUCT CODE
COLOUR/OPTICS
LUMINAIRE BODY
4009.250.03
8174.250.02
frosted opal glass
opal acrylic
7532, 7532/SC
7532, 7532/SC
4009.300.03
8174.300.02
frosted opal glass
opal acrylic
7532, 7532/SC, 661HF, 661HF/SC
7532, 7532/SC, 661HF, 661HF/SC
4009.350.03
8174.350.02
frosted opal glass
opal acrylic
7666HF, 7666HFDIM, 7666HF/SC
7666HF, 7666HFDIM, 7666HF/SC
4009.400.03
8174.400.02
frosted opal glass
opal acrylic
7667HF, 7667HFDIM
7667HF, 7667HFDIM, 7667HF/SC
33
1
Sol luminaires
The versatile and solid Sol luminaires, created in cooperation with Finnish
architects and electrical designers, combine classic shapes, correct size and
proportions, and are the right choice for demanding general lighting tasks. Sol
luminaires are half flush or surface mounted on either the ceiling or a wall. Sol
accessories belonging to the series provide diversity in external appearance,
add mechanical strength and, if necessary, facilitate installation.
34
These splash-proof and double-insulated luminaires made of
impact-resistant polycarbonate are suitable for both dry and humid
spaces (both indoors and outdoors). The body is available in white,
brass and chrome.
In the luminaire series, new additions are Sol 773 and Sol 782LED,
which have been developed especially for situations where the
luminaire has to be turned on rapidly and frequently and efficient
lighting is required (e.g., for stairwells). The Sol 773 also functions
well in cold outdoor temperatures. Sol 782LED uses the latest light
source technology, which helps achieve low energy consumption,
good light production and long LED life. In addition, it is also
possible to turn the light on rapidly and frequently.
The accessories designed for the Sol series facilitate installation,
protect the luminaires and give them a new and stylish look
according to the needs of the different environments of use.
Sol accessories include the mounting strap, trim ring, eyelid and
cross guards.
35
Sol luminaires
Sol 770, 773 . . . . . . .
Sol 775, 775HF . . . . .
Sol 780, 780W, 782LED
Sol accessories . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
36
38
40
41
1
Sol luminaires 770, 773
Structure
Sol 770 and 773 luminaires are
multipurpose general luminaires made
of impact-resistant polycarbonate and
suitable for all buildings. Light source:
75 W incandescent lamp or 18 W Osram
Facility compact fluorescent lamp.
dry and humid spaces, both indoors
and outdoors. Thanks to their flat and
timeless design, their resistance against
vandalism and their different colour
and installation options, excellent
applications include, for example,
washrooms, showers, dressing rooms,
living rooms, workrooms, hobby
rooms, kitchens, utility rooms, exterior
walls, shelters and outbuildings. Both
luminaires are also especially suited to
automatic stairway lighting or motion
detector control.
The Sol 773 luminaire is delivered
with lamps.
Sol 770 and 773 luminaires are
equipped with an E27 lamp holder,
and other light sources suitable for this
lamp holder are also available. Such
sources include, for example, compact
fluorescent lamps with ballasts of
different power, halogen lamps or LED
light sources to be installed instead of
incandescent lamp.
- White polycarbonate body
- Also available in brass or chrome
- Hinged intermediate cover with aluminium reflector and insulation plate
- Impact-resistant opal polycarbonate diffuser
- Lamp holder (E27) fastened to the intermediate cover
- 770, light source max power 75 W
- 773, light source: OSRAM EL FCY 18W/827 E27 compact fluorescent lamp
(delivered with luminaire)
Installation
- Surface or flush mounting on the ceiling and
a wall
- Fastens from the bottom of the luminaire
- Recessed light hole Ø 290 mm
- Recessed depth 36 mm
- In flush mounting on panel ceilings, fastens
with a mounting strap
36
Connection
- Spring connectors -o- 3 x 2.5 mm2
- Recessed box (flash or surface mounting)
More information
- Trim ring 7070 as an accessory for surface mounting
- Cross guard 7077 as an accessory for surface mounting (installed with trim ring
7070)
- Mounting strap 7020 as an accessory for flush mounting
PRODUCT CODE
COLOUR/OPTICS
Sol 770
770.000
white/opal
770.200
brass/opal
770.700
chrome/opal
Sol 773, delivered with lamps
773.001
white/opal
773.201
brass/opal
773.701
chrome/opal
LIGHT SOURCE
WEIGHT, KG
I-75-E27
I-75-E27
I-75-E27
0.8
0.8
0.8
EL FCY 18W/827 E27
EL FCY 18W/827 E27
EL FCY 18W/827 E27
1.0
1.0
1.0
Light distribution
37
1
Sol luminaires 775, 775HF
Structure 775
Sol 775 and 775HF luminaires are
efficient and multipurpose universal
luminaires made of impact-resistant
polycarbonate and suitable for all
buildings.
Light source: 2 x 11 W or 2 x 9 W
compact fluorescent lamps in the
Sol 775 model and 2 x 11 W compact
fluorescent lamps in the Sol 775HF
model.
both dry and humid spaces. Thanks
to their flat and timeless design, their
resistance against vandalism and
their different colour and installation
options, excellent applications include,
for example, entrance halls, corridors,
washrooms, showers, dressing
rooms, living rooms, hobby rooms,
workrooms, kitchens and utility rooms.
- Luminaire diameter 325 mm,
height 87 mm
- White polycarbonate body and hinged
intermediate cover
- Body also available in brass or chrome
- Compact fluorescent lamps:
2 pcs FSD-I-11/30/1B-G23 or
2 pcs FSD-I-9/30/1B-G23
- Lamp holders: 2 pcs G23
- Additional metal supports for lamps
- Conventional ballasts equipped with
overheating protections, 2 pcs
Structure 775 HF
- Body and hinged intermediate cover of white
polycarbonate
- Compact fluorescent lamps:
2 pcs FSD-E-11/30/1B-2G7
- Lamp holders: 2 pcs 2G7
- Additional metal supports for lamps
- Electronic control gear, 2 pcs
Installation
The luminaires are equipped with two
ballasts. Therefore, if one lamp fails,
the other one will still function.
The luminaires are delivered with lamps.
Safety lighting versions are also
available for some luminaires.
- Surface or flush mounting on the ceiling or a wall
- Recessed light hole Ø 290 mm
- Recessed depth 36 mm
- In flush mounting on panel ceilings, fastens with a mounting strap
Connection
38
More information
- Trim ring 7070 as an accessory for surface mounting
- Cross guard 7076 as an accessory for surface mounting.
Installed with trim ring 7070.
- Eyelid 7075 for wall mounting. Fastens directly to the luminaire diffuser
- Mounting strap 7020 as an accessory for flush mounting
PRODUCT CODE
COLOUR/OPTICS
Sol 775, 2 x 11 W, delivered with lamps
775.001
white/opal
775.201
brass/opal
775.701
chrome/opal
Sol 775, 2 x 9 W, delivered with lamps
775.002
white/opal
775.202
brass/opal
775.702
chrome/opal
Sol 775HF, 2 x 11 W, delivered with lamps
775.001HF
white/opal
775.201HF
brass/opal
775.701HF
chrome/opal
LIGHT SOURCE
WEIGHT, KG
FSD-11/30/1B-I-G23
FSD-11/30/1B-I-G23
FSD-11/30/1B-I-G23
1.6
1.6
1.6
FSD-9/30/1B-I-G23
FSD-9/30/1B-I-G23
FSD-9/30/1B-I-G23
1.6
1.6
1.6
FSD-11/30/1B-E-2G7
FSD-11/30/1B-E-2G7
FSD-11/30/1B-E-2G7
1.0
1.0
1.0
39
Light distribution
1
Sol luminaires 780, 780W, 782LED
Structure 780, 780W
These Sol luminaires are efficient and
versatile general luminaires made of
impact-resistant polycarbonate and
suitable for all kinds of buildings. For
Sol 780 and 780W luminaires, the light
source is one 28 W compact fluorescent
lamp. Sol 782LED luminaires use as light
source a LED module that is permanently installed on the intermediate cover.
dry and humid spaces, both indoors
and outdoors. Thanks to their flat and
timeless design, resistance against vandalism and different colour and installation options, excellent applications
include, for example, entrance halls,
corridors, washrooms, showers, dressing rooms, living rooms, hobby rooms,
workrooms, kitchens, utility rooms, exterior walls, shelters and outbuildings.
Sol 782LED is also especially suited to
automatic stairway lighting or motion
detector activated lighting subject to
frequent on-off cycling. Sol 782LED
turns on without delay also in freezing
temperatures. The LED module does
not produce UV radiation. Therefore, its
plastic parts last longer. If a single LED
gets damaged, this does not affect the
functioning of the luminaire.
Sol 780, 780W luminaires contain a
conventional ballast and an electronic
starter (780) that lengthens the service
life of the lamp or frost-resistant starter
(780W) suitable for outdoor use. A
Sol 782LED luminaire also contains
an electronic constant current power
supply. The luminaires are delivered
with light sources.
- White polycarbonate body and hinged
intermediate cover
- Compact fluorescent lamp: FSS-E-28/30/1B-GR10q
- Lamp holder: GR10q
- Lamp additional support
- Conventional ballast
- 780 with electronic starter
- 780 W with frost-resistant starter
Structure 782LED
- White polycarbonate body and hinged intermediate cover of aluminium with white finish
- Fixed LED light source (total power about 17 W) in the hinged intermediate cover
- Constant current power supply
- Protection class I
Installation
- Surface or flush mounting on a ceiling or wall, recessed light hole Ø 290 mm,
recessed depth 36 mm
- In flush mounting on panel ceilings, fastens with a mounting strap
Connection
More information
- Same accessories as for Sol luminaires 775 and 775HF (see page 39)
Total power
Power Luminaire light Light output
Colour
Colour rendering
W
factor production, lm ratio (LOR) lm/W temperature index (CRI)
Sol 782LED 17.1
>0.9
1,120
65
5,000 K
Ra = 70
-30%*
+24%*
+76%*
Sol 775HF 24.0
0.5
900
37
3,000 K
Ra = 80
* in comparison with Sol 775HF values.
Light distribution
PRODUCT
COLOUR/
LIGHT SOURCE
CODE
OPTICS
Sol 780, electronic starter, delivered with lamps
780.001
white/opal
FSS-28/30/1B-E-GR10q
780.201
brass/opal
780.701
chrome/opal
Sol 780W, frost-resistant starter, delivered with lamps
780.001W
white/opal
Sol 782LED, includes a LED light source
782.001LED
white/opal
LED
782.201LED
brass/opal
LED
782.701LED
chrome/opal
LED
40
WEIGHT,
KG
1.8
1.8
1.8
1.8
1.2
1.2
1.2
Sol accessories
Mounting strap 7020
- Suitable for all Sol luminaires for flush mounting on panel ceilings
- Bent galvanised steel, two threaded holes, crosshead machine screws
- Lead-in sketches for screws in the bottom of the luminaire body
- The luminaire part is fastened to the mounting strap and tightened against the lower ceiling
Trim ring 7070
- Additional ring for the surface mounting of Sol luminaires
- Ring diameter 344 mm, height 38 mm
- Spun coated aluminium
- Colour alternatives are white or black finish, and with vacuum metallisation
brass or chrome
- Installed together with the luminaire body. The trim ring is clamped between
luminaire body and ceiling thus stabilizing the surface mounting.
Eyelid 7075
- Suitable for installation on luminaires with lower diffusers (775, 780 and 782)
- Eyelid diameter 320 mm, height 160 mm
- Galvanised and painted steel, three welded fixing nuts and screws
- Available in white or black
- Fastens directly to the luminaire diffuser, three drilling marks for the holes on the inner surface of the diffuser
- The eyelid is installed slightly detached from the diffuser surface
Cross guard 7076
- Suitable for installation on luminaires with lower diffusers (Sol 775,
780 and 782)
- Installed with trim ring 7070
- Guard diameter 360 mm, height from mounting surface about 110 mm
- Galvanised and painted steel, three rods with an intermediate bar connecting
them, round rim with a tightening screw
- Installed in the groove located in the trim ring and tightened in place.
Supports luminaire installation and protects the luminaire from impact.
- Installation with eyelid 7075 possible
Cross guard 7077
- Suitable for installation on luminaires with lower diffuser (Sol 770 and 773)
- Installed with trim ring 7070
- Guard diameter 360 mm, height from mounting surface about 135 mm
- Galvanised and painted steel, two bent rods perpendicular to each other,
round rim with a tightening screw
- Installed in the groove located in the trim ring and tightened in place. Supports
luminaire installation and protects the luminaire from impact.
PRODUCT CODE
COLOUR/OPTICS
Mounting strap
7020.000
grey
Trim ring
7070.000
white
7070.100
black
7070.200
brass
7070.700
chrome
Eyelid
7075.000
white/opal
7075.100
brass/opal
Cross guard, installed with trim ring
7076.000
white/opal
7076.100
brass/opal
Cross guard, installed with trim ring
7077.000
white/opal
7077.100
brass/opal
FOR LUMINAIRE
WEIGHT, KG
770, 773, 775, 780, 782
0.2
770, 773, 775, 780, 782
770, 773, 775, 780, 782
770, 773, 775, 780, 782
770, 773, 775, 780, 782
0.3
0.3
0.3
0.3
775, 780, 782
775, 780, 782
1.1
1.1
775, 780, 782
775, 780, 782
1.0
1.0
770, 773
770, 773
0.7
0.7
41
1
Duo luminaires
The versatile and durable Duo luminaires, which have been created in cooperation with
architects and electrical designers, also provide the right wall luminaire solution for
demanding outdoor lighting.
42
The splash-proof (IP44) Duo luminaires, with their steel bodies and
impact-resistant polycarbonate diffusers, are highly suitable for the entire
constructed environment (both outdoors and indoors). If necessary, they are
also equipped with a snow guard.
The body is available in white, black and graphite grey.
In the luminaire series, the newest addition is the Duo 812, which has been
developed especially for situations where the luminaire has to be turned on
rapidly and frequently (e.g., for motion detector use). The Duo 812 functions
well also in cold outdoor temperatures.
43
1
Duo house number and wall luminaires 810, 812, 815
Structure
A practically designed, impactresistant house number and wall
luminaire.
Its applications are one-family houses
and residential properties, as well
as public, business and industrial
buildings and their environments.
Duo is suitable for both indoor and
outdoor installations.
- Galvanised steel body
- Polyester finish, colour alternatives: white, black or graphite grey
- Gasket against the diffuser
- Aluminium reflector
- Impact-resistant opal polycarbonate diffuser (UV stabilisation)
- Rotating mounting plate of aluminium
- Cable lead-ins in the mounting plate and body side
(in wall mounts, on the surface directed upwards)
Luminaire Lamp
model
holder
810
E27
812
E27
815
E27
Light source
Note
Incandescent lamp or equivalent, max 75 W
Compact fluorescent lamp 18 W, EL FCY 18W/827 E27
Mercury-vapour lamp 50 W, QE/R-50-H-E27
The luminaire is delivered
with lamps
Conventional ballast
This efficient and very luminous
luminaire is also highly suitable for
the general lighting of garden areas
and passages. The diffuser design and
uniform surface luminance give a wide
and clear angle of view also when the
luminaire is used to illuminate house
numbers. A steel snow guard of the
same colour as the body is available as
an accessory with its fastener.
Installation
Thanks to the clamping achieved
with a rotating mounting plate, the
Duo luminaire position can be easily
adjusted.
Duo luminaires equipped with an
E27 lamp holder are also highly
suitable for light sources other than
lamps with an E27 base, LED lamps
and compact fluorescent lamps with
their own ballast).
- On a wall or the ceiling (surface or semi-flush mounting)
- Fastens from the bottom of the luminaire, rotating mounting
plate, hole-to-hole distance for fastening holes is 78 mm
- Recessed light hole 230 x 230 mm. Recessed depth 50 mm.
- Diffuser with fastening pins, fastening ensured with two screws
Connection
- Connectors -o- 3 x 2.5 mm2 for recessed box (flush or surface mounting)
44
More information
- Snow guard 7080 as an accessory, galvanised steel, polyester finish. Screw-fastening with key
holes, fastens apart from the luminaire
- Spare diffuser 8180-240
PRODUCT CODE
COLOUR/OPTICS
LIGHT SOURCE
Duo 810, max 75 W
810.000
white/opal
max 75 W, E27
810.100
black/opal
max 75 W, E27
810.400
graphite grey/opal
max 75 W, E27
Duo 812, Osram Facility 18 W, delivered with lamps
812.000
white/opal
EL FCY 18W/827 E27
812.100
black/opal
EL FCY 18W/827 E27
812.400
graphite grey/opal
EL FCY 18W/827 E27
Duo 815, mercury-vapour lamp 50 W
815.000
white/opal
QE/R-50-H-E27
815.100
black/opal
QE/R-50-H-E27
815.400
graphite grey/opal
QE/R-50-H-E27
Snow guards
7080.000
white
7080.100
black
7080.400
graphite grey
Spare diffuser
8180.240
opal
WEIGHT, KG
1.4
1.4
1.4
1.6
1.6
1.6
2.2
2.2
2.2
0.3
0.3
0.3
Light distribution
45
1
Iittala bollards
Due to their timeless design, Iittala bollards are suitable for the outdoor lighting of
public buildings, as well for as one-family houses.
The beautiful and glareless light is also highly suitable for squares and shore areas.
Iittala bollards
Iittala bollards are made of polyester-finished aluminium, so they are corrosionresistant and have a long life. Iittala bollards mainly have rotationally symmetrical
light distribution directed downwards from the horizontal plane.
The part directed upwards gives a backlight that slightly emphasises the
surrounding structures and vegetation.
The luminaires are 1.2 m or 70 cm high. The luminaires can also be equipped with a
Schuko socket with hinged lid and can then also be used, for example, as a current
generator for the garden or a car engine and interior heater.
46
Marine bollards
Iittala bollards
Iittala bollards 687, 688, 689, 788 . . . . . . . . . . . 48
Marine bollard 688 . . . . . . . . . . . . . . . . . . . . 50
I-Valo's marine bollards are very luminous bollards
designed for the needs of electricity and water
distribution. The main areas of application are quaysides, harbour areas, camp sites and caravan parks. The
luminaire uses an 80 W mercury-vapour lamp.
The bollards are 1.2 m high and can be equipped with
two CEE socket outlets and one water tap. The luminaires
include socket outlet-specific (automatic) circuit breakers
and residual current circuit breakers.
Luminaire body is entirely made of chromated
aluminium. As a result, it is also suitable for use in a
brackish water environment. For wooden jetties, the
luminaire has a square mounting flange with a larger
mounting surface.
47
1
Iittala bollards 687, 688, 689, 788
Structure
The corrosion-resistant and
vandalism-proof aluminium structure,
the efficient light sources and the
traditional and unpretentious design,
as well as the many colours available
and the possibility of having a socket
outlet all combine to make Iittala
bollards an excellent choice for the
outdoor lighting of public, business
and residential buildings, and for
outdoor electricity distribution.
Recommended applications include,
for example, entrances, gardens,
passages, planted areas, stairs,
squares and car parks. The luminaires
are also suitable for indoor use.
The height of the bollards is 1.2 m
and their body diameter is 200 mm.
Iittala bollards can also be equipped
with a Schuko socket with hinged lid.
The bollards do not contain residual
current circuit breakers or (automatic)
circuit breakers.
The models equipped with an E27
lamp holder (788) are also highly
their own ballast).
- Column, lamellas and head of aluminium
- Polyester finish, colour alternatives: white,
black or graphite grey
- Transparent glass lamp guard
- Aluminum mounting flange
- (/SO) Embedded Schuko socket (IP44) with
hinged lid
- Terminal compartment under a separate
cover to be opened with tool
Luminaire model
687
688
689
788
Lamp holder
E27
E27
E27
E27
Light source
Metal halide 70 W, MES/UB-70-H-E27
Mercury-vapour lamp 80 W, QE/R-80-H-E27
High pressure sodium lamp 70 W, SE-70-H/I-E27
Incandescent lamp or equivalent, max 100 W
Ballast
Conventional
Conventional
Conventional
Installation
- The luminaire mounting flange is fastened
directly to the base or the galvanised steel pipe
(Ø 60 mm) delivered with it and wedged, for
example, onto the column base
- The luminaire body is fastened to the mounting
flange
- The lamp is installed and the diffuser is fastened
to the body
Connection
- Connectors -o- 5 x 2.5 mm2, the terminal block is about 0.4 m from the mounting flange
behind the openable cover
48
More information
Light distribution
- Also available in the lower version (height 700 mm) upon order
- With a 60 mm/108 mm pipe (h=150mm/500mm) for a larger column
base upon order
- With 5 x 1.5-25 mm² Cu and 5 x 10-35 mm² Al terminal block kits or with a
-o- 5 x 10 mm² Cu terminal block upon order
PRODUCT CODE
COLOUR
LIGHT SOURCE
WEIGHT, KG
Iittala 687, metal halide lamp 70 W
687.000
white
MES/UB-70-H-E27
11.4
687.110
black
MES/UB-70-H-E27
11.4
687.440
graphite grey
MES/UB-70-H-E27
11.4
Iittala 687, metal halide lamp 70 W, Schuko socket outlet
687.000/SO
white
MES/UB-70-H-E27
11.5
687.110/SO
black
MES/UB-70-H-E27
11.5
687.440/SO
graphite grey
MES/UB-70-H-E27
11.5
Iittala 688, mercury-vapour lamp 80 W
688.000
white
QE/R-80-H-E27
11.4
688.110
black
QE/R-80-H-E27
11.4
688.440
graphite grey
QE/R-80-H-E27
11.4
Iittala 688, mercury-vapour lamp 80 W, Schuko socket outlet
688.000/SO
white
QE/R-80-H-E27
11.5
688.110/SO
black
QE/R-80-H-E27
11.5
688.440/SO
graphite grey
QE/R-80-H-E27
11.5
Iittala 689, high pressure sodium lamp 70 W
689.000
white
SE-70-H/I-E27
11.4
689.110
black
SE-70-H/I-E27
11.4
689.440
graphite grey
SE-70-H/I-E27
11.4
Iittala 689, high pressure sodium lamp 70 W, Schuko socket outlet
689.000/SO
white
SE-70-H/I-E27
11.5
689.110/SO
black
SE-70-H/I-E27
11.5
689.440/SO
graphite grey
SE-70-H/I-E27
11.5
Iittala 788, max 100 W
788.000
white
max 100 W, E27
10.2
788.110
black
max 100 W, E27
10.2
788.440
graphite grey
max 100 W, E27
10.2
Iittala 788, max 100 W, Schuko socket outlet
788.000/SO
white
max 100 W, E27
10.3
788.110/SO
black
max 100 W, E27
10.3
788.440/SO
graphite grey
max 100 W, E27
10.3
49
1
Marine bollard 688
Structure
The chromated, corrosion-resistant
and vandalism-proof aluminium
structure; the efficient and very
luminous luminaire part equipped
with a good diffuser; the traditional
and unpretentious design; the colour
alternatives and the possibility for
electricity and water distribution
make the marine bollard an excellent
choice as a basic luminaire for the
outdoor lighting of harbours and
quays in brackish water environments
as well as of camping sites and
caravan parks.
The height of the bollards is 1.2 m
The luminaires are
without socket outlets or,
alternatively, are equipped with
two CEE socket outlets to be closed
by means of a separate lock. The
luminaires equipped with a socket
outlet contain residual current
circuit breakers (30 mA, 2 pcs) and
(automatic) circuit breakers (C16 A, 2
pcs) under their openable cover. Also
a water panel can be acquired for the
luminaires as an accessory.
- Column, lamellas and head of polyesterfinished aluminium, chromated body
- Colour: white or graphite grey
- Lamp guard of transparent glass
- Lamp holder: E27
- Light source: Mercury-vapour lamp 80 W,
QE/R-80-H-E27
- Hot galvanised steel square mounting flange
(250 x 250 mm)
- Without socket outlets or with 2 IP44 CEE
socket outlets on the body surface
- In the model with socket outlets, 2 circuit
breakers (16 A) and 2 residual current devices
(30 mA/25 A) are under their cover
- Conventional ballast
Installation
- Directly on the base by means of a mounting flange. The flange contains 4 mounting holes
(Ø 13 mm, spacing 4 x 200 mm), lead-in for the cables in the middle of the flange.
Connection
- Column with terminal compartment cover to be opened using a tool
- Terminal block about 0.4 m from the mounting flange
- Connectors -o- 5 x 2.5 mm2, for the luminaire
- Connectors -o- 5 x 10 mm2, for socket outlets
More information
- Water panel 7088, is an accessory consisting of polyester-finished aluminium,
a hose holder and a 1/2" water tap. Colours: white and graphite grey
- With column base mounting equipment upon order
- Available with 5 x 1.5-25 mm² Cu and 5 x 10-35 mm² Al terminal block kits or
with a -o- 5 x 10 mm² Cu terminal block upon order
50
Light distribution
PRODUCT CODE
COLOUR
LIGHT SOURCE
Marine bollard, mercury-vapour lamp 80 W
688.000.00.L
white
QE/R-80-H-E27
688.440.00.L
graphite grey
QE/R-80-H-E27
Marine bollard, mercury-vapour lamp 80 W, two CEE socket outlets
688.002.02.L
white
QE/R-80-H-E27
688.442.02.L
graphite grey
QE/R-80-H-E27
Water panel
7088.000
white
7088.400
graphite grey
WEIGHT, KG
12.9
12.9
13.6
13.6
1.0
1.0
51
1
Beo bollards
Modern design, resistance to vandalism and many lamp and colour
alternatives make Beo bollards an excellent luminaire for demanding
public buildings and private use. The luminaires are suitable for both
indoor and outdoor use.
52
Beo bollards are tested by VTT Technical Research Centre of
Finland and, with their class 3, they are the most vandalismproof outdoor luminaires. (VTT Research Report No. 46-010180)
Beo bollards are 1,200 mm high and have rotationally
symmetrical light distribution.
They can be installed directly on the base using a mounting flange
or on the column base using the pipe delivered with the bollards.
53
1
Beo bollards 880, 881, 882, 883
Structure
Beo bollards are resistant to
vandalism, illuminate in an efficient
manner and offer many different
colour and lamp alternatives. Thanks
to this, they are an excellent choice
for the lighting of public, business
and residential buildings.
The height of the bollards is 1.2 m,
their upper frame diameter is 300 mm
Suitable applications include,
for example, entrances, gardens,
passages, planted areas, stairs,
squares and car parks.
The models are equipped with an
E27 lamp holder (880) and are highly
their own ballast).
- Column, vertical bars and horizontal lamellas of galvanised steel
- Aluminium head of the upper part of the luminaire
- Polyester finish, colour alternatives: white, black or graphite grey
- Unpainted aluminium mounting flange
- Transparent, impact-resistant polycarbonate diffuser
- Glare protection for lamp of perforated steel with white finish
Luminaire
model
880
Lamp
holder
E27
881
E27
882
E27
883
G24d2
Light source
Ballast
Incandescent lamp or
equivalent, max 75 W
Mercury-vapour lamp 50 W, Conventional
QE/R-50-H-E27
High pressure sodium lamp Conventional
50 W, SE-50-H/I-E27
Compact fluorescent lamp Conventional
18 W, FSQ-18-I-G24d2
Installation
- The mounting flange is fastened directly to the base or the galvanised steel pipe
(Ø 60 mm) delivered with it and wedged to the column base
- The luminaire body is fastened to the mounting flange
- The light source is installed
- The upper part and the diffuser are fastened to the body
54
Connection
- Connectors -o- 5 x 2.5 mm2, terminal block about 0.8 m from the
mounting flange
More information
- Available with a 60 mm/108 mm column base pipe (h=150mm/500mm)
upon order
- Available with 5 x 1.5-25 mm² Cu and 5 x 10-35 mm² Al terminal block
kits or with a -o- 5 x 10 mm² Cu terminal block upon order
PRODUCT CODE
COLOUR
Beo 880, max 75 W
880.000
white
880.100
black
880.400
graphite grey
Beo 881, mercury-vapour lamp 50 W
881.000
white
881.100
black
881.400
graphite grey
Beo 882, high pressure sodium lamp 50 W
882.000
white
882.100
black
882.400
graphite grey
Beo 883, compact fluorescent lamp 18 W
883.000
white
883.100
black
883.400
graphite grey
LIGHT SOURCE
WEIGHT, KG
max 75 W, E27
max 75 W, E27
max 75 W, E27
18,7
18,7
18,7
QE/R-50-H-E27
QE/R-50-H-E27
QE/R-50-H-E27
19,9
19,9
19,9
SE-50-H/I-E27
SE-50-H/I-E27
SE-50-H/I-E27
19,9
19,9
19,9
FSQ-18-I-G24d2
FSQ-18-I-G24d2
FSQ-18-I-G24d2
19.0
19.0
19.0
Light distribution
55
1
2
I-Valo's industrial luminaires have been planned with particular
attention to their suitability for high ambient temperatures, humid
and dusty applications, and for premises which have impurities
in the air. The luminaires are easy to install and maintain, and the
need for maintenance is minimal.
56
Due to their high light output ratio (LOR) that remains almost
new, I-Valo's industrial luminaires maintain their luminosity
even in demanding conditions. Therefore, the number
of luminaires can be minimised, which saves energy and
reduces installation and operating costs.
Customers are, for example, the forest, metal, chemical and
building material industries, as well as thermal power plants.
57
ViVO lowbays 9309, 9319, 9329, 9339 . . . .
Lowbays 6201, 6211, 6221 . . . . . . . . . . .
Lowbay 6231 . . . . . . . . . . . . . . . . . . .
Laxus lowbays 9231, 9241 . . . . . . . . . . .
Fluorescent luminaires (T5) 9441, 9451 . . .
Fluorescent safety luminaire (T5) 9441.800.
Fluorescent luminaires (T8) 6431, 6441 . . .
LED Exit sign and safety luminaire 9701. . .
Horizontal luminaires 6233, 6243, 6263 . . .
Floodlights and crane
luminaires 6237, 6247, 6267 . . . . . . . . . .
Regular luminaires 6232, 6242 . . . . . . . .
Hood luminaire 6126 . . . . . . . . . . . . . .
Ballast boxes 6058, 6059 . . . . . . . . . . . .
Industrial spots 6207, 6307, 6317 . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
58
62
64
66
68
70
72
74
76
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
80
82
84
85
86
2
ViVO lowbays 9309, 9319, 9329, 9339
Structure
When planning the luminaire, the
starting points were easy: installability,
good maintainability, long life and
outstanding energy-efficiency. The
innovative control of the temperature
inside the luminaire guarantees the
long life of the electronic control gear
representing the latest technology.
A Goretex filter protects the inside
of the luminaire from soiling. Thanks
to the air-pressure tested, extruded
aluminium body and high-quality
extruded silicone gaskets the
luminaire retains its light output ratio
(LOR) even in the most demanding
conditions.
20
120
A general luminaire for both outdoor
and indoor use in demanding
conditions. Thanks to its small size
and registered design, the luminaire is
suitable for use in public places and in
an industrial environment.
- A closed and air-pressure tested luminaire with a Goretex filter
- Aluminum body and cover casting with epoxy coating, grey colour (RAL 7011)
- Tempered safety glass
- Black latches (RAL 9005)
- Registered design
360
Installation
- Surface mounting
- The luminaire can be installed on the ceiling surface, a suspension rail or luminaire arm
(Ø 60 mm) by means of the basic bracket delivered with the luminaire
Thanks to its lightness, the luminaire is
fast and easy to install.
Safe and easy maintenance is ensured
by the automatic voltage cut-off of the
luminaire when opening the cover and
by the easily openable and detachable
luminaire technology.
Typical installation height 2–8 m.
58
Connection
- Cable glands -o- 5 x 2.5 mm² or a 1.5 m cable and a plug
Accessories
- Wall bracket 6010
- Pole bracket for one luminaire 6011
- Pole bracket for two luminaires 6012
Wall bracket 6010.000.000
Pole bracket for one luminaire
6011.000.000
Pole bracket for two luminaires
6012.000.000
More information
- Three different powers and four different light distributions ensure the most suitable energyefficient lighting for each place of use
59
2
ViVO lowbays 9309, 9319, 9329, 9339
PRODUCT CODE
ViVO 35 W
9309.000.R2-MT12
9309.000.R3-MT12
9309.005.R3-MT12
9309.000.R5-MT12
9309.400.R2-MT12
9309.400.R3-MT12
9309.405.R3-MT12
9309.400.R5-MT12
ViVO 70 W
9319.000.R2-MT12
9319.000.R3-MT12
9319.005.R3-MT12
9319.000.R5-MT12
9319.400.R2-MT12
9319.400.R3-MT12
9319.405.R3-MT12
9319.400.R5-MT12
ViVO 100 W
9329.000.R2-MT12
9329.000.R3-MT12
9329.005.R3-MT12
9329.000.R5-MT12
9329.400.R2-MT12
9329.400.R3-MT12
9329.405.R3-MT12
9329.400.R5-MT12
ViVO 150 W
9339.000.R2-MT12
9339.000.R3-MT12
9339.005.R3-MT12
9339.000.R5-MT12
9339.400.R2-MT12
9339.400.R3-MT12
9339.405.R3-MT12
9339.400.R5-MT12
CONNECTION
LIGHT SOURCE
TA CLASS
WEIGHT, KG
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
Cable 1.5 m + plug
Cable 1.5 m + plug
Cable 1.5 m + plug
Cable 1.5 m + plug
MT-35W-G12
MT-35W-G12
MT-35W-G12
MT-35W-G12
MT-35W-G12
MT-35W-G12
MT-35W-G12
MT-35W-G12
60°C
60°C
60°C
60°C
60°C
60°C
60°C
60°C
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
Cable 1.5 m + plug
Cable 1.5 m + plug
Cable 1.5 m + plug
Cable 1.5 m + plug
MT-70W-G12
MT-70W-G12
MT-70W-G12
MT-70W-G12
MT-70W-G12
MT-70W-G12
MT-70W-G12
MT-70W-G12
55°C
55°C
55°C
55°C
55°C
55°C
55°C
55°C
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
Cable 1.5 m + plug
Cable 1.5 m + plug
Cable 1.5 m + plug
Cable 1.5 m + plug
MT-100W-G12
MT-100W-G12
MT-100W-G12
MT-100W-G12
MT-100W-G12
MT-100W-G12
MT-100W-G12
MT-100W-G12
40 °C
40 °C
40 °C
40 °C
40 °C
40 °C
40 °C
40 °C
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
Cable 1.5 m + plug
Cable 1.5 m + plug
Cable 1.5 m + plug
Cable 1.5 m + plug
MT-150W-G12
MT-150W-G12
MT-150W-G12
MT-150W-G12
MT-150W-G12
MT-150W-G12
MT-150W-G12
MT-150W-G12
40 °C
40 °C
40 °C
40 °C
40 °C
40 °C
40 °C
40 °C
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
Light distribution
60
NOTE
Frosted glass
Frosted glass
Frosted glass
Frosted glass
Frosted glass
Frosted glass
Frosted glass
Frosted glass
61
2
Lowbays 6201, 6211, 6221
Structure
I-Valo's 70–150 W lowbays are
compact and durable luminaires for
the general lighting of low spaces.
- A closed and air-pressure tested luminaire with a dust filter
- Body of extruded aluminium with epoxy coating, grey colour (RAL 7040)
- Luminaires 6201 and 6211 with polycarbonate diffuser
- Luminaire 6221 with tempered safety glass
- Diffuser frames and latches of aluminium with epoxy coating
- With capacitors
Due to their small size and wide
range of brackets, they are highly
suitable, for example, for lighting
power plants and boilers.
70–100 W luminaires guarantee a
durable solution, for example, for
parking garages.
Other popular applications include,
for example, pulp and paper mill
basements, power plants and boilers,
corridors, parking garages, stairways
and maintenance platforms.
Installation
- Surface mounting
- The luminaire can be installed directly on the ceiling surface, suspension rail or a wall
Accessories
A dust filter protects the inside of the
luminaire from soiling.
- Suspension chains 6020
- Adjustable wall bracket 6035 (2 pcs)
- Wall bracket 6060 (2 pcs)
- Wall bracket 6061
- Pole bracket 6063
- Bracket for lighting column 6065
- Wire bracket 6079
- Adjustable rail bracket 6505.076.00
Connection
More information
- If necessary, luminaires 6201 and 6211 may also be ordered with a high frame with tempered
safety glass instead of the polycarbonate diffuser. This version is recommended when using a
metal halide lamp.
- All lowbays are also available with frosted glass
62
PRODUCT
CONNECTION
LIGHT SOURCE TA
CODE
CLASS
Lowbay with polycarbonate diffuser (unless otherwise stated)
6201.000.V3
-o- 5 x 2.5 mm²
ST-70W-E27
40 °C
6201.400.V3
Cable 1.5 m + plug
ST-70W-E27
40 °C
6211.000.V3
-o- 5 x 2.5 mm²
ST-100W-E40
40 °C
6211.005.V3
-o- 5 x 2.5 mm²
ST/MT-100W-E40
40 °C
6211.006.V3
-o- 5 x 2.5 mm²
ST/MT-100W-E40
40 °C
6211.060.V3
-o- 5 x 2.5 mm²
ST-100W-E40
40 °C
6211.400.V3
Cable 1.5 m + plug
ST-100W-E40
40 °C
6211.405.V3
Cable 1.5 m + plug
ST/MT-100W-E40
40 °C
6211.406.V3
Cable 1.5 m + plug
ST/MT-100W-E40
40 °C
6211.460.V3
Cable 1.5 m + plug
ST-100W-E40
40 °C
Lowbay with tempered safety glass
6221.000.V3
-o- 5 x 2.5 mm²
ST/MT-150W-E40
40 °C
6221.005.V3
-o- 5 x 2.5 mm²
ST/MT-150W-E40
40 °C
6221.400.V3
Cable 1.5 m + plug
ST/MT-150W-E40
40 °C
6221.405.V3
Cable 1.5 m + plug
ST/MT-150W-E40
40 °C
WEIGHT,
KG
6.0
6.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
9.0
9.0
9.0
9.0
Light distribution
63
NOTE
Frosted glass
Transparent glass
No filter
Frosted glass
Transparent glass
No filter
Transparent glass
Frosted glass
Transparent glass
Frosted glass
2
Lowbay 6231
Structure
I-Valo's 250 W lowbay is a durable
general luminaire for low spaces.
- Aluminum cover glass frame and latches
- With capacitors
The luminaire, which is only 162 mm
high, is highly suitable for renovation
targets where the space available for
the luminaire is limited.
Typical applications include, for
example, pulp and paper mill
basements, corridors, parking
garages, stairways and maintenance
platforms.
The dust filter prevents the inside of
the luminaire from soiling.
Installation
- Surface mounting
Accessories
- Wall bracket 6061.030.00
- Pole bracket 6063.030.00
- Wire bracket 6079
Connection
More information
- Also available with frosted glass
PRODUCT CODE
CONNECTION
LIGHT SOURCE
6231.000.V3
-o- 5 x 2.5 mm²
ST/MT-250W-E40
35 °C
12.0
6231.005.V3
-o- 5 x 2.5 mm²
ST/MT-250W-E40
35 °C
12.0
6231.400.V3
Cable 1.5 m + plug ST/MT-250W-E40
35 °C
13.0
6231.405.V3
Cable 1.5 m + plug ST/MT-250W-E40
35 ºC
13.0
64
TA
CLASS
WEIGHT
KG
NOTE
Transparent
glass
Frosted glass
Transparent
glass
Frosted glass
Light distribution
65
2
Laxus lowbays 9231, 9241
Structure
I-Valo's Laxus lowbays offer an
excellent solution for the general
lighting of industrial spaces when
a small, robust luminaire with wide
light distribution is needed.
- Cover glass frame and latches of aluminium with epoxy coating
- With capacitors
Laxus luminaires are equipped with
a dust filter that prevents the inside
of the luminaire from soiling, which
ensures that the luminaire will retain
its high light output ratio (LOR) even
in the most demanding conditions.
Laxus luminaire is suitable for
the general lighting of different
production spaces. Other applications
include, for example, power plants
and boilers, storage spaces and
loading bridges.
Installation
- Surface mounting
Accessories
- Wall bracket 6061
- Pole bracket 6063
- Wire bracket 6079
Connection
- Cable glands -o- 5 x 2,5 mm² or 1.5 m cable and plug
More information
- Also available with frosted glass
66
PRODUCT CODE
CONNECTION
LIGHT SOURCE
TA CLASS
WEIGHT, KG
9231.000.V3
-o- 5 x 2.5 mm²
ST/MT-250W-E40
40 °C
11.0
Transparent glass
9231.005.V3
9231.400.V3
9231.405.V3
9241.000.V3
9241.005.V3
9241.400.V3
9241.405.V3
-o- 5 x 2.5 mm²
Cable 1.5 m + plug
Cable 1.5 m + plug
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
Cable 1.5 m + plug
Cable 1.5 m + plug
ST/MT-250W-E40
ST/MT-250W-E40
ST/MT-250W-E40
ST/MT-400W-E40
ST/MT-400W-E40
ST/MT-400W-E40
ST/MT-400W-E40
40 °C
40 °C
40 °C
40 °C
40 °C
40 °C
40 °C
11.0
11.0
11.0
12,5
12,5
12,5
12,5
Frosted glass
Transparent glass
Frosted glass
Transparent glass
Frosted glass
Transparent glass
Frosted glass
Light distribution
67
NOTE
2
Fluorescent luminaires (T5) 9441, 9451
Structure
I-Valo's T5 fluorescent luminaires
have an enduring structure and a
high temperature class.
- Body of aluminium with epoxy coating, grey colour (RAL 7040)
- Gaskets made of high-quality silicone rubber and silicone mass tested for luminaire use
- Acid-proof steel spring and hinge parts for cover glass and aluminium latches
- Electronic control gear, 200...250 V, 0/50...60 Hz
luminaire from soiling, which ensures
that the luminaire will retain its high
light output ratio (LOR) even in the
most demanding conditions. This
way, maintenance intervals are long.
In addition, changing the lamp is
faster and easier thanks to the pushon lamp holders.
The optimised structure and very
high light output ratio (LOR) of
I-Valo's T5 fluorescent luminaires
offer an extremely energy-efficient
solution for low industrial spaces,
corridors, stairways, work-point
lighting, etc.
T5 luminaires equipped with
an acrylic cover are suitable, for
example, for use in the food industry.
The typical installation height of the
luminaires is 2–8 m.
The luminaire is also available in
a version with a battery for safety
lighting. See more information on
page 70.
Installation
- Surface mounting
- Suitable for ceiling, wall, luminaire rail and wire installation
- The separately ordered brackets mentioned below are used with wall and beam mounting
Accessories
- Wire bracket 6079
Connection
- Cable glands -o- 5 x 2,5 mm² or 1.5 m cable and plug
More information
- Also with acrylic cover upon order
68
PRODUCT CODE CONNECTION
T5 FLUORESCENT LUMINAIRES
9441.000.V3
-o- 5 x 2.5 mm²
9441.400.V3
Cable 1.5 m + plug
9451.000.V3
-o- 5 x 2.5 mm²
9451.400.V3
Cable 1.5 m + plug
LIGHT SOURCE TA CLASS
FD-54W-G5 x 2
FD-54W-G5 x 2
FD-80W-G5 x 2
FD-80W-G5 x 2
WEIGHT, KG
45 °C
45 °C
45 °C
45 °C
12.0
12.0
14.0
14.0
Light distribution
69
NOTE
Electronic control gear
2
Fluorescent safety luminaire (T5) 9441.800
Structure
Equipped with a luminaire-specific
battery for safety lighting. When
power fails, the battery provides
current to one of the fluorescent
tubes intended for use as safety
light. The luminous flux of the
battery-driven fluorescent tube is
about 20% of the nominal luminous
flux. The standard battery has an
operating time of 1h. A 3h battery
is also available upon order. The
battery charges when the charging
voltage is connected.
Thanks to its structure and high light
output ratio (LOR), the luminaire
is extremely energy-efficient. A
dust filter protects the inside of
the luminaire from soiling, which
ensures that the luminaire will retain
its high light output ratio (LOR) even
- A closed and air-pressure tested structure with a dust filter
- 1 h battery
- Acid-proof steel spring and hinge diffuser parts and the latches of aluminium
Installation
- Surface mounting
- Separately ordered brackets mentioned below are used with wall and beam mounting
Accessories
- Wire bracket 6079
Connection
- Cable glands -o- 5 x 2.5 mm²
More information
- Also available with an acrylic diffuser, making the luminaire suitable for the food industry
- If necessary, available with a special safety light device having, for example, self-testing
capabilities and offering the possibility to cut the current from the luminaire during
maintenance without the battery running down
Note: The holding voltage and the voltage going to the control gear must have the same phase.
PRODUCT CODE
9441.800.V3
CONNECTION
-o- 5 x 2.5 mm²
70
LIGHT SOURCE
FD-54W-G5 x 2
TA CLASS
25 °C
WEIGHT, KG
12.0
Light distribution
71
2
Fluorescent luminaires (T8) 6431, 6441
Structure
- An impact-resistant acrylic diffuser with aluminium latches
I-Valo’s T8 fluorescent luminaires have
an enduring structure and a high Ta
class. This makes them well-suited , for
example, for the general lighting of
low industrial spaces.
The typical installation height of the
luminaires is 2–5 m.
The luminaires are equipped with a
dust filter that prevents the inside of
the luminaire from soiling.
Installation
- Surface mounting
Accessories
- Wire bracket 6079
Connection
- Cable glands -o- 5 x 2.5 mm² or a 1.5 m cable and plug
More information
- May be equipped with an electronic control gear
- Also available with cover glass
PRODUCT
CONNECTION
CODE
T8 fluorescent luminaires
6431.000.V3
-o- 5 x 2.5 mm²
6431.070.V3
-o- 5 x 2.5 mm²
6431.400.V3
Cable 1.5 m + plug
6431.470.V3
Cable 1.5 m + plug
6441.000.V3
-o- 5 x 2.5 mm²
6441.070.V3
-o- 5 x 2.5 mm²
6441.400.V3
Cable 1.5 m + plug
6441.470.V3
Cable 1.5 m + plug
72
LIGHT
SOURCE
FD-36W-G13 x 2
FD-36W-G13 x 2
FD-36W-G13 x 2
FD-36W-G13 x 2
FD-58W-G13 x 2
FD-58W-G13 x 2
FD-58W-G13 x 2
FD-58W-G13 x 2
TA
CLASS
50°C
50°C
50°C
50°C
50°C
50°C
50°C
50°C
WEIGHT,
KG
11.0
11.0
11.0
11.0
13.0
13.0
13.0
13.0
NOTE
Electr. control gear
Light distribution
73
2
LED Exit sign and emergency luminaire 9701
Structure
A durable low-maintenance exit sign
and safety luminaire designed for
demanding conditions. Excellent for
marking and providing emergency
lighting for exit routes in process
spaces.
- Very long operating life due to LED light sources
- Longest visibility range 36 m (SFS-EN 1838)
Typically used in paper machine
environments, pulp mills, workshops,
steel mills, power plants, boilers and
storage rooms.
Mounting height 2–5 m.
Basic version:
- 200...240 V, 0/50...60 Hz, connected load 3.5 W
Batteries:
- 220...240 V 50...60 Hz
- Connected load 4 W
- Battery life 3 h
- Battery charging time 12 h
- Deep discharge protection
- Limits power automatically when needed, so that 3 h will be achieved
Basic battery:
- Switches automatically to battery use
- Equipped with a test switch that can be used to test the functioning of the luminaire
- LED indicating the condition of the luminaire
Pro battery:
- Switches automatically to battery use
- LED indicating the condition of the luminaire
- Controlling and monitoring enabled with DALI interface
- If DALI interface is not connected, the weekly operating test will start
automatically, as will the condition and operating test of the battery every 13th week
74
Installation
- Surface mounting. Mounting directly onto the mounting surface. Mounting height
2–5 m.
Connection
- Cable glands -o- 5 x 2.5 mm2
Accessories
- Screen printed acrylic plates with arrows can be ordered in three different arrow
directions
- A blank white opal acrylic plate is also available for emergency luminaire use
Product code
10470
14071
14072
14073
Product
legend panel, no printing
legend panel, right arrow
legend panel, left arrow
legend panel, down arrow
BASIC VERSION
PRODUCT CODE
CONNECTION
LIGHT SOURCE
9701 with opal acrylic plate, no printing
9701.000.00
-o- 5 x 2.5 mm² LED
9701 Right arrow
9701.000.01
-o- 5 x 2.5 mm² LED
9701 Left arrow
9701.000.02
-o- 5 x 2.5 mm² LED
9701 Down arrow
9701.000.03
-o- 5 x 2.5 mm² LED
TA CLASS
WEIGHT, KG
45 °C
3,5
45 °C
3,5
45 °C
3,5
45 °C
3,5
BASIC BATTERY
PRODUCT CODE
Right arrow
9701.803.01
Left arrow
9701.803.02
Down arrow
9701.803.03
CONNECTION
LIGHT SOURCE
TA CLASS
WEIGHT, KG
-o- 5 x 2.5 mm²
LED
45 °C
3,7
-o- 5 x 2.5 mm²
LED
45 °C
3,7
-o- 5 x 2.5 mm²
LED
45 °C
3,7
CONNECTION
LIGHT SOURCE
-o- 5 x 2.5 mm²
LED
45 °C
3,7
-o- 5 x 2.5 mm²
LED
45 °C
3,7
-o- 5 x 2.5 mm²
LED
45 °C
3,7
PRO BATTERY
PRODUCT CODE
Right arrow
9701.813.01
Left arrow
9701.813.02
Down arrow
9701.813.03
TA CLASS
WEIGHT, KG
75
2
Horizontal luminaires 6233, 6243, 6263
Structure
I-Valo’s Horizontal luminaires are
designed for demanding industrial
spaces where high temperatures and/
or impurities in the air (dust, gases)
challenge the structure of the luminaire.
The structure of the horizontal
luminaire is very firm, low and robust.
Epoxy coating protects the aluminium
housing from corrosion, the dust rim of
the luminaire prevents the front glass
from soiling, and the double-effect
filter keeps the inside of the luminaire
clean. This way the luminaire retains
its high light output ratio even in the
most demanding conditions, and
there is no need to use an excessive
number of luminaires. Moreover, the
long service intervals and quick lamp
changes guarantee an overall costeffective solution.
- A closed and air-pressure tested luminaire with a double-effect filter
- Luminaire body of aluminium with epoxy coating, grey colour (RAL 7040)
- The luminaire’s dust rim prevents the outer surface of the glass from getting dirty and
functions as an excellent glare protection. Quick latches open the dust rim and the attached
glass easily for lamp change
- With capacitors
6233/6243
250/400 W
6263
1000 W
Installation
- The luminaire is delivered with a luminaire-specific mounting rail attached to the mounting surface
- The luminaire part is mounted on the rail and locked in place. The mounting rail also has holes
for different brackets
Horizontal luminaires are typically used
in steel mills, foundries, workshops,
the turbine houses of power plants,
pulp and paper mills, sawmills and the
wood-processing industry, and the
food and beverage industry.
Horizontal luminaires are available
with a separate ballast box for
even higher ambient temperatures
(over +70 °C) or other demanding
installation conditions.
6233.001/6243.001
250/400 W
Connection
- Cable junction box -o- 5 x 2.5 mm2 or a 1.5 m cable and plug
Mounting height 5–30 m,
15–30 m with 1000 W luminaires
76
Accessories
- Ceiling/wall bracket 6076
- Suspension rod 6078
- Wire bracket 6079
- Wall and beam bracket 6091
More information
- In circumstances that demand great mechanical strength, e.g., in sandblasting areas, the glass can be
replaced by thicker 10 mm tempered glass and, if needed, also equipped with a safety net.
- The dust rim of the luminaire can also be equipped with PTFE film (teflon), which prevents glass shards
from entering the process, for example, in the food industry
- The luminaire can be delivered with a hot-restrike igniter, enabling the immediate restart of a hot
discharge lamp
PRODUCT CODE CONNECTION
LIGHT SOURCE
6233.000.V1
-o- 5 x 2.5 mm²
ST/MT-250W-E40
6233.000.V2
-o- 5 x 2.5 mm²
ST/MT-250W-E40
6233.000.V9
-o- 5 x 2.5 mm²
ST/MT-250W-E40
6233.000.V3
-o- 5 x 2.5 mm²
ST/MT-250W-E40
6233.400.V1
Cable 1.5 m + plug
ST/MT-250W-E40
6233.400.V2
Cable 1.5 m + plug
ST/MT-250W-E40
6233.400.V9
Cable 1.5 m + plug
ST/MT-250W-E40
6233.400.V3
Cable 1.5 m + plug
ST/MT-250W-E40
6243.000.V3
-o- 5 x 2.5 mm²
ST/MT-400W-E40
6243.400.V1
Cable 1.5 m + plug
ST/MT-400W-E40
6243.400.V2
Cable 1.5 m + plug
ST/MT-400W-E40
6243.400.V9
Cable 1.5 m + plug
ST/MT-400W-E40
6243.400.V3
Cable 1.5 m + plug
ST/MT-400W-E40
6263.000.V1
-o- 5 x 2.5 mm²
ST/MT-1000W-E40
6263.000.V2
-o- 5 x 2.5 mm²
ST/MT-1000W-E40
6263.000.V3
-o- 5 x 2.5 mm²
ST/MT-1000W-E40
6263.400.V1
Cable 1.5 m + plug
ST/MT-1000W-E40
6263.400.V2
Cable 1.5 m + plug
ST/MT-1000W-E40
6263.400.V3
Cable 1.5 m + plug
ST/MT-1000W-E40
Horizontal luminaire for sand and shot blasting areas
6233.001.V2
-o- 5 x 2.5 mm²
ST/MT-250W-E40
6243.001.V2
-o- 5 x 2.5 mm²
ST/MT-400W-E40
Horizontal luminaire with hot-restrike igniter
6234.000.V2
-o- 5 x 2.5 mm²
SD-250W-Fc2
6234.400.V2
Cable 1.5 m + plug
SD-250W-Fc2
6244.000.V2
-o- 5 x 2.5 mm²
SD-400W-Fc2
6244.400.V2
Cable 1.5 m + plug
SD-400W-Fc2
6334.000.V2
-o- 5 x 2.5 mm²
MD-250W-Fc2
6334.400.V2
Cable 1.5 m + plug
MD-250W-Fc2
6344.000.V2
-o- 5 x 2.5 mm²
MD-400W-Fc2
6344.400.V2
Cable 1.5 m + plug
MD-400W-Fc2
TA CLASS
70°C
70°C
70°C
70°C
70°C
70°C
70°C
70°C
60°C
60°C
60°C
60°C
60°C
30°C
30°C
30°C
30°C
30°C
30°C
WEIGHT, KG
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
18.0
18.0
18.0
18.0
18.0
30.0
30.0
30.0
32.0
32.0
32.0
70°C
60°C
16,5
23.0
70°C
70°C
60°C
60°C
70°C
70°C
60°C
60°C
16,5
16,5
17.0
17.0
21.0
21.0
21.0
21.0
77
NOTE
Light distribution 2.5
2
Horizontal luminaires 6233, 6243, 6263
Light distribution
78
79
2
Floodlights and crane luminaires 6237, 6247, 6267
Structure
I-Valo's horizontal luminaire family
includes floodlights that are well-suited
for demanding industrial spaces, where
high temperatures and/or impurities
in the air (dust, gases) challenge the
structure of the luminaire.
The structure of the floodlights in the
horizontal luminaire family is very firm,
low and strong. Epoxy coating protects
the aluminium frame from corrosion,
the dust rim of the luminaire prevents
the front glass from soiling and the
double-effect filter keeps the inside
of the luminaire clean. This way the
luminaire retains its high light output
ratio even in the most demanding
conditions, and there is no need to use
an excessive number of luminaires.
Moreover, long service intervals and
quick lamp changes guarantee an
overall cost-effective solution.
- A closed and air-pressure tested luminaire with a double-effect filter
- Luminaire body of aluminium with epoxy coating, grey colour (RAL 7040)
- The dust rim around the front glass prevents the outer surface of the glass from soiling, while
also improving the glare protection of the luminaire.
- With capacitors
Floodlights
6237/6247
250/400 W
6267
1000 W
Crane luminaire
The luminaires can be used both
indoors and outdoors, and they are
normally used in steel mills, foundries,
outdoor areas of factories, storage and
loading areas, etc.
Mounting height 5–30 m,
15–30 m with 1000 W luminaires.
I-Valo’s crane luminaires have all the
technical qualities of the horizontal
luminaire family, and they are suited
for both indoor and outdoor use.
80
Installation
- The luminaire comes with a mounting and alignment device allowing the luminaire to be rotated
in relation to two axes
Accessories
- 6093 glare shield for a 250/400 W floodlight
- 6094 glare shield for a 1000 W floodlight
Connection
- Cable 1.5 m + plug
More information
- The light distribution curves are similar to those given for the corresponding horizontal luminaires
on page 78
- A crane luminaire version available. A crane luminaire may compensate for the crane’s shadow in
general lighting and optimise the lighting in the crane’s working area
PRODUCT CONNECTION
CODE
Floodlights
6237.400.V1 Cable 1.5 m + plug
6237.400.V2 Cable 1.5 m + plug
6237.400.V9 Cable 1.5 m + plug
6237.400.V3 Cable 1.5 m + plug
6247.400.V1 Cable 1.5 m + plug
6247.400.V2 Cable 1.5 m + plug
6247.400.V9 Cable 1.5 m + plug
6247.400.V3 Cable 1.5 m + plug
6267.400.V1 Cable 1.5 m + plug
6267.400.V2 Cable 1.5 m + plug
Crane model
6237.420.V2 Cable 1.5 m + plug
6237.430.V2 Cable 1.5 m + plug
6237.440.V2 Cable 1.5 m + plug
6247.420.V2 Cable 1.5 m + plug
6247.430.V2 Cable 1.5 m + plug
6247.440.V2 Cable 1.5 m + plug
LIGHT SOURCE
TA
CLASS
WEIGHT, NOTE
KG
ST/MT-250W-E40
ST/MT-250W-E40
ST/MT-250W-E40
ST/MT-250W-E40
ST/MT-400W-E40
ST/MT-400W-E40
ST/MT-400W-E40
ST/MT-400W-E40
ST/MT-1000W-E40
ST/MT-1000W-E40
70°C
70°C
70°C
70°C
60°C
60°C
60°C
60°C
25°C
25°C
19,5
19,5
19,5
19,5
21.0
21.0
21.0
21.0
32.0
32.0
ST/MT-250W-E40
SD-250W-FC2
SD/MD-250W-FC2
ST/MT-400W-E40
SD-400W-FC2
SD-400W-FC2
70°C
70°C
70°C
60°C
60°C
60°C
19,5
19,5
19,5
21.0
21.0
21.0
81
Hot-restrike igniter
Hot-restrike igniter
2
Regular luminaires 6232, 6242
Structure
The dust rim of the regular luminaire
will prevent the front glass from
soiling, and the dust filter will keep
the inside of the luminaire clean. This
way the luminaire retains its high
light output ratio even in the most
demanding conditions, and there is
no need to use an excessive number
of luminaires. Moreover, long service
intervals and quick lamp changes
guarantee an overall cost-effective
solution.
Regular luminaires are typically used
in workshops, the turbine houses of
power plants, pulp and paper mills,
sawmills and the wood-processing
industry, warehouses, etc.
Regular luminaires may be fitted
with a patented safety cover for use
in the food and packaging industry.
Safety covers may also be ordered for
regular luminaires that have already
been installed.
(900)
I-Valo’s Regular luminaires are
designed for challenging industrial
spaces, where the luminaires are
exposed to air impurities (e.g., dust).
- Ballast box and mounting rail of aluminium with epoxy coating, grey colour (RAL 7040)
- The luminaire housing is of blank aluminium
- With capacitors
Installation
- Surface mounting
- The luminaire comes with a separate mounting rail, which facilitates both the installation and
future maintenance of the luminaire
- Can be mounted directly on the ceiling, suspension rail or cable ladder without additional brackets
Accessories
- Wall and beam bracket 6091
- Safety cover (PMMA) 6090
Connection
- Cable junction box -o- 5 x 2,5 mm² or a 1.5 m cable and plug
More information
- If required, the luminaire may be fitted with a patented safety cover 6090, making it suitable for
use in the food and packaging industry
PRODUCT CODE
6232.000.V2
6232.000.V3
6232.400.V2
6232.400.V3
6242.000.V1
6242.000.V2
6242.000.V3
6242.400.V1
6242.400.V2
6242.400.V3
CONNECTION
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
Cable 1.5 m + plug
Cable 1.5 m + plug
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
Cable 1.5 m + plug
Cable 1.5 m + plug
Cable 1.5 m + plug
82
LIGHT SOURCE
ST/MT-250W-E40
ST/MT-250W-E40
ST/MT-250W-E40
ST/MT-250W-E40
ST/MT-400W-E40
ST/MT-400W-E40
ST/MT-400W-E40
ST/MT-400W-E40
ST/MT-400W-E40
ST/MT-400W-E40
TA CLASS
55°C
55°C
55°C
55°C
45 °C
45 °C
45 °C
45 °C
45 °C
45 °C
WEIGHT, KG
14,5
14,5
14,5
14,5
16.0
16.0
16.0
16.0
16.0
16.0
Light distribution
83
2
Hood luminaire 6126
Structure
The luminaire is designed for high
ambient temperatures (50–120 ˚C),
so it is suited for extremely hot
industrial uses, such as the lighting of
a paper machine's drying cylinders or
a cement factories' cyclone areas.
Gaskets and sealing compounds
made from heat-resistant special
materials.
Typical installation height 2–8 m. In
addition to the luminaire, a ballast
box, which is to be placed in a cooler
space, is needed (sold separately).
- Closed luminaire
- A tempered safety glass
- Lamp holder E27
Installation
- Surface mounting
- The luminaire can be mounted directly on the ceiling, suspension rail, wall or a separate
alignment device
Accessories
- Adjustable bracket 6066
Connection
More information
- In addition to the luminaire part, a ballast box, such as 6058 or 6059, is needed
PRODUCT CODE
6126.000.V3
CONNECTION
-o- 5 x 1.5 mm²
Light distribution
84
LIGHT SOURCE
QE-125W-E27
TA CLASS
120 °C
WEIGHT, KG
3.5
Ballast boxes 6058, 6059
Structure
Ballast box for hood luminaire 6126
including the necessary ballasts
and residual current device.
- Extruded aluminium with epoxy coating, grey colour (RAL 7040)
- 6058.000.00 box includes 3 x Q-125 W ballasts, incl. residual current device
- 6059.000.00 box includes 9 x Q-125 W ballasts, incl. residual current device
- 6058.905.00 box includes 3 x Q-125 W ballasts, no residual current device
- 6059.902.00 box includes 9 x Q-125 W ballasts, no residual current device
- With capacitors
6058
Installed in a cooler ambient
temperature than the luminaires.
6058
Installation
- Installed separately from luminaires to a space with a lower ambient temperature
- Mounted using the lugs at the end of the profile
Connection
- Connection diagrams can be downloaded from I-Valo's website: www.i-valo.com
PRODUCT
CODE
6058.000.00
6059.000.00
6058.905.00
6059.902.00
CONNECTION POWER
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
85
3 x Q-125W
9 x Q-125W
3 x Q-125W
9 x Q-125W
TA CLASS
45 °C
45 °C
45 °C
45 °C
WEIGHT,
KG
15.0
25.5
15.0
25.5
NOTE
With residual current device
With residual current device
Without residual current device
Without residual current device
2
Industrial spotlights 6207, 6307, 6317
Structure
Industrial spotlights are used in
the lighting of drying cylinders,
wet end and paper web of paper
machines, outdoor lighting, logo
and signboard lighting and other
objects that require spotlighting.
- Closed, air-pressure tested luminaire
- The glass frame is easy to open with quick latches for lamp change
- With capacitors
The luminaire can be directed and
inclined to optimise spotlighting.
Installation
- Surface mounting
- The luminaire is mounted using the lugs in the ballast box
- The luminaire can also be delivered with a separate ballast box; in this case also the luminaire
part is equipped with lugs
Connection
- Cable glands -o- 5 x 2.5 mm² or a 1.5 m cable and plug
More information
- Light distribution may be regulated by choosing either a matte glass lamp (wide light
distribution) or a clear lamp (narrow light distribution)
PRODUCT CODE
6207.000.V1
6207.400.V1
6307.000.V1
6307.400.V1
6317.000.V1
6317.400.V1
CONNECTION
-o- 5 x 2.5 mm²
Cable 1.5 m + plug
-o- 5 x 2.5 mm²
Cable 1.5 m + plug
-o- 5 x 2.5 mm²
Cable 1.5 m + plug
86
LIGHT SOURCE
ST-70W-E27
ST-70W-E27
MT-70W-E27
MT-70W-E27
ME/MC-100W-E27
ME/MC-100W-E27
TA CLASS
50°C
50°C
50°C
50°C
50°C
50°C
WEIGHT, KG
5,5
5,5
21.0
21.0
21.0
21.0
Light distribution
87
2
3
ATEX-luminaires
Compliance with the Equipment and Protective Systems Intended for Use
in Potentially Explosive Atmospheres (ATEX) Directive has been mandatory
from 1st July 2003. Explosive atmospheres are supervised by safety
authorities as part of workplace safety.
88
ATEX-luminaires
Classification of ATEX zones
Zone 0:
a place in which an explosive atmosphere consisting of a mixture
with air of dangerous substances in the form of gas, vapour or mist is
present continuously or for long periods or frequently;
Zone 20:
a place in which an explosive atmosphere in the form of a cloud of
combustible dust in air is present continuously or for long periods or
frequently;
Zone 1:
with air of dangerous substances in the form of gas, vapour or mist is
likely to occur in normal operation occasionally;
Zone 21:
a place in which an explosive atmosphere in the form of a cloud
of combustible dust in air is likely to occur in normal operation
occasionally;
Zone 2:
with air of dangerous substances in the form of gas, vapour or mist
is not likely to occur in normal operation but, if it does occur, will
persist for a short period only;
Zone 22:
a place in which an explosive atmosphere in the form of a cloud of
combustible dust in air is not likely to occur in normal operation but,
if it does occur, will persist for a short period only.
89
ATEX-luminaires
ATEX II 2 D Lowbays EX6211, EX6221 . . . . . .
ATEX II 2 D Lowbays EX9231, EX9241 . . . . . .
ATEX II 2 D Regular luminaire EX6232, EX6242
ATEX II 2 D Fluorescent luminaires (T5)
EX9441, EX9451. . . . . . . . . . . . . . . . . . . .
ATEX II 2 GD Fluorescent luminaires
EX9551, EX9561. . . . . . . . . . . . . . . . . . . .
ATEX rating plate markings . . . . . . . . . . . .
. . . . 90
. . . . 91
. . . . 92
. . . . 93
. . . . 94
. . . . 95
3
ATEX II 2 D Lowbays EX6211, EX6221
Structure
EX II 2 D IP64 T 175°C (80°C)
For zones 21, 22.
General industrial luminaire for
low spaces with dust-hazardous
environments.
- A closed, air-pressure tested luminaire with dust filter
- With capacitors
- The structure of the luminaire may not be altered
The highest surface temperatures for EX6211 and EX6221 in an ambient temperature of 40°C:
1. Surface on which dust can settle: 80°C (upper part)
2. Surface at which dust clouds are present: 175°C (glass)
Used in areas that have been classified
as dust-hazardous, such as biomass
boiler facilities, closed conveyors, grain
handling facilities and fibreglass boat
production facilities.
luminaire from soiling.
Installation
- Surface mounting
- The luminaire can be mounted straight on the ceiling, suspension rail or wall
Accessories
- Wall bracket 6061
- Pole bracket 6063
- Wire bracket 6079
Connection
More information
- Certificate number: VTT 03 ATEX 064X
- A user and service manual is provided with the luminaire
Standards:
EN 60598-2-1:1989
EN 60598-1:2000+A11:2000
EN 50281-1-1:1998
PRODUCT CODE
EX6211.000.V3
EX6221.000.V3
CONNECTION
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
90
Directives:
73/23/EEC
89/336/EEC
94/9/EC
LIGHT SOURCE
ST/MT-100W-E40
ST/MT-150W-E40
TA CLASS
40 °C
40 °C
WEIGHT, KG
6.0
6.0
ATEX II 2 D Lowbays EX9231, EX9241
ATEX-luminaires
Structure
EX II 2 D IP64 T 175°C (100°C)
For zones 21, 22.
The luminaire is excellent for the
general lighting of industrial spaces
in dust-hazardous areas.
- A closed and air-pressure tested luminaire with dust filter
- With capacitors
boiler facilities, closed conveyors,
grain handling facilities and fibreglass
boat production facilities.
Retains its high light output ratio
even in the most demanding
conditions. A dust filter protects the
inside of the luminaire from soiling.
Installation
- Surface mounting
- The luminaire can be mounted straight on the ceiling surface, suspension rail or wall
Accessories
- Pole bracket 6063
- Wire bracket 6079
- Wall bracket 6061
Connection
More information
Standards:
EN 60598-2-1:1989
EN 60598-1:2000+A11:2000
EN 50281-1-1:1998
PRODUCT CODE
EX9231.000.V3
EX9241.000.V3
CONNECTION
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
91
Directives:
73/23/EEC
89/336/EEC
94/9/EC
LIGHT SOURCE
ST/MT-250W-E40
ST/MT-400W-E40
TA CLASS
40 °C
40 °C
WEIGHT, KG
10.0
12.0
3
ATEX II 2 D Regular luminaire EX6232, EX6242
Structure
For zones 21, 22.
- A closed and air-pressure tested luminaire
with a dust filter
- Ballast box and mounting rail made of aluminium with
epoxy coating, grey colour (RAL 7040)
- The luminaire housing is of blank aluminium
- With capacitors
The luminaire is excellent for the general
lighting of demanding industrial spaces
in dust-hazardous areas.
The highest surface temperatures for EX6232 in an
ambient temperature of 40°C:
EX II 2 D 250W
EX II 2 D 400W
IP64 T 145°C (90°C)
IP64 T 165°C (95°C)
boiler facilities, closed conveyors,
grain handling facilities and fibreglass
boat production facilities.
Long service interval thanks to the
dust rim and filter. High light output
ratio guarantees cost-efficiency.
Retains its high light output ratio even
The highest surface temperatures for EX6242 in an
ambient temperature of 40°C:
Installation
- Surface mounting
- The luminaire comes with a separate mounting rail, facilitating both the installation and future
maintenance of the luminaire
- Can be mounted directly on the ceiling, suspension rail or cable ladder without additional brackets
Accessories
- Wall and beam mounting 6091
Connection
- Cable junction box -o- 5 x 2.5 mm²
More information
- Certificate number: VTT 03 ATEX 062X/063X
Standards:
EN 60598-2-1:1989
EN 60598-1:2000+A11:2000
EN 50281-1-1:1998
PRODUCT CODE
EX6232.000.V3
EX6232.000.V2
EX6242.000.V3
EX6242.000.V2
CONNECTION
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
92
Directives:
73/23/EEC
89/336/EEC
94/9/EC
LIGHT SOURCE
ST/MT-250W-E40
ST/MT-250W-E40
ST/MT-400W-E40
ST/MT-400W-E40
TA CLASS
40 °C
40 °C
40 °C
40 °C
WEIGHT
14,5
14,5
16.0
16.0
ATEX II 2 D Fluorescent luminaires (T5) EX9441, EX9451
ATEX-luminaires
Structure
EX II 2 D Ex tD A21
IP64 T 75°C
For zones 21, 22.
General industrial luminaire for low
spaces with dust-hazardous areas.
- A closed and air-pressure tested luminaire with dust filter
- The spring and hinge parts of the cover are made of acid-proof steel, and the latches made of
aluminium
boiler facilities, closed conveyors, grain
handling facilities and fibreglass boat
production facilities.
Thanks to its structure and high
light output ratio, the luminaire is
extremely energy-efficient.
luminaire from soiling, which ensures
that the luminaire will retain its high
light output ratio (LOR) even in the
most demanding conditions.
The luminaire may also be delivered
with a polycarbonate cover (PC) that
can be used, for example, in the food
industry.
Installation
- Surface mounting
Accessories
- Adjustable wall bracket 6035 (2 kpl)
- Wire bracket 6079
Connection
More information
Standards:
EN 60598-2-1:1989
EN 60598-1:2000+A11:2000
EN 50281-1-1:1998
PRODUCT CODE
EX9441.000.V3
EX9451.000.V3
CONNECTION
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
93
Directives:
73/23/EEC
89/336/EEC
94/9/EC
LIGHT SOURCE
FD-54W-G5 x 2
FD-80W-G5 x 2
TA CLASS
40 °C
40 °C
WEIGHT
12.0
14.0
3
ATEX II 2 GD Fluorescent luminaires EX9551, EX9561
Structure
EX II 2 GD
EEx emb II T3
EEx tD A21 IP64 T80°C
Ta max: +50°C
For zones 1, 2, 21, 22.
General industrial luminaire for low
spaces with hazardous dust and gas
environments.
Used in spaces that are classified as
dangerous because of gas, liquids
and dust, such as storage areas for
explosive liquids and gases, paintshops
and chemical processing areas. Typical
installation height 2–8 m.
- A closed and air-pressure tested luminaire with a metal-coated double-effect filter
- The cover is made of tempered safety glass
- Gaskets consist of high-quality silicone rubber and silicone mass tested for luminaire use
- The spring and hinge parts of the cover are made of acid-proof steel, while the frame and
latches are made of aluminium
The highest outer surface temperatures for EX9551 and EX9561:
2. Surface at which dust clouds are present: 80°C (Glass)
Temperatures have been measured at an ambient temperature of 50°C. If the ambient
temperature differs from this, the values will change accordingly.
EX9551
EX9561
Installation
Thanks to its structure and high light
output ratio, the luminaire is extremely
energy-efficient.
- Surface mounting
Metal-coated double-effect filter
protects the inside of the luminaire
from soiling, which ensures that
the luminaire will retain its high
light output ratio even in the most
demanding conditions.
- Adjustable wall bracket 6035 (2 kpl)
- Wire bracket 6079
- Bracket for lighting column 6063.020.00 and wall bracket 6061.020.00 are also suitable for EX9551
- Encapsulated lamp CENTAUR SLAM HORNET 80W SHCFL80C product code 6909.008.04
Accessories
The luminaire may also be delivered
with a polycarbonate cover (PC) that
can be used, for example, in the food
industry.
Connection
More information
- Certificate number: VTT 05 ATEX 056
Standards:
EN 60079-0 (2004) EN 60079-7 (2003)
EN 60079-18 (2004) EN 61241-0 (2004)
EN 61241-1 (2004)
PRODUCT CODE
EX9551.000.V3.FD1
EX9551.060.V3.FD1
EX9561.000.V3.FD1
EX9561.060.V3.FD1
CONNECTION
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
-o- 5 x 2.5 mm²
94
LIGHT SOURCE
SHCFL-80W
SHCFL-80W
SHCFL-80W x 2
SHCFL-80W x 2
Directives:
73/23/EEC
89/336/EEC
94/9/EC
TA CLASS
50 °C
50 °C
50 °C
50 °C
WEIGHT, KG
6,4
6,1
12,5
12,1
NOTE
No filter
No filter
ATEX rating plate markings
ATEX-luminaires
Manufacturer
EX9551
Certification mark
CFL80W
Lamp type
230V 50Hz
Operating voltage
Marking according to the ATEX directive
II 2 GD
General marking
II
Explosion group, other than mines (I = mines)
2
Device category, explosive atmosphere occurs occasionally in normal operation (1 = very high level of safety,
2 = high level of safety, 3 = normal level of safety)
G
Gas
D
Dust
EEx emb II T3
Marking for gases and liquids
EEx
EN-standard marking for explosion protection
e
Increased safety, low surface temperatures, no sparks
(d = flameproof enclosure, p = pressurised, i = intrinsically safe)
mb
Encapsulation, normal (one failure principle)
II
Explosion group, other than mines
II is suitable for groups IIA, IIB, IIC
T3
(letter is used in Exd group for experimental safety gap)
T1
T2
T3
T4
T5
T6
Temperature
class
450°C
300°C
200°C
135°C
100°C
85°C
Max. permitted surface
temperature of equipment
EEx tD A21
Marking for dust
EEx
EN-standard marking for explosion protection
tD
Protection with enclosure
A21
Zone 21, place in which explosive dust atmosphere is likely to occur in normal operation occasionally
(20 is the most demanding, then 21 and 22) (A = European practice, B = American)
T75°C
Highest surface temperature on outer surfaces
EN50281-1-2
Tmax = 2/3 Tci
max = T5mm-75K
IP64
Tci
= ignition temperature of a dust cloud
T5mm = ignition temperature of a dust layer of 5 mm
Enclosure class (dust tight, splash proof)
(IP65 without filter, jet-proof)
ta50°C
Maximum ambient temperature
Suitable for mounting onto a flammable surface (e.g., wood)
2005
Year of manufacture
A luminaire with a broken cover must be removed from use until the cover is replaced
VTT 05 ATEX 056 Certificate number
CE-mark and production quality certified institute number
WEEE mark, manufactured after 13/08/2005
95
3
Brackets for industrial luminaires
6010 ViVO Wall bracket 5°/10°/15°/20°
- hot galvanized, polyester-painted steel
6011 ViVO Pole bracket for a single luminaire 5°/10°/15°/20°
6012 ViVO Pole bracket for two luminaires 5°/10°/15°/20°
6020 Suspension chains
- standard length 2 x 4 m
- hot galvanized steel Ǿ 2 mm
- acid-proof hooks Ǿ 5 mm
- also with lengths:
6020.050.00 = 0.5 m
6020.200.00 = 2 m
6020.500.00 = 5 m
6035 Adjustable wall bracket
- steel plate with epoxy coating /
aluminium with epoxy coating
- steplessly adjustable angle
- 2 brackets are required for mounting
96
6060 Wall bracket 0°, 45°
- mounting angle 0˚ or 45˚
- hot galvanized steel with epoxy coating
- the luminaire is mounted with two brackets
6061 Wall bracket 0°, 25°, 45°
- mounting angle 0˚/25˚/45˚
- product number of the lowbay 6231 bracket 6061.030.00
- product number of the ATEX luminaire EX9551 bracket 6061.030.00
6063 Pole bracket 0°, 25°, 45°
- hot galvanized steel with
epoxy coating
- product number of the
lowbay 6231 bracket
6063.030.00,
- product number of the ATEX
luminaire EX9551
bracket 6063.020.00
6065 Bracket for lighting column
6066 Alignment bar
- aluminium with epoxy coating
- alignment bar for hood luminaire 6126
97
Brackets for industrial luminaires
6076 Ceiling/wall bracket
- hot galvanized steel with epoxy
coating / aluminium with epoxy
coating
6078 Suspension rod
- standard length 1 m
- other lengths on request
- hot galvanized steel 4 x 30 mm
- the luminaires may be mounted on a
hollow-core slab even before the slab is
put in place
6079 Wire bracket
- 1 pair/luminaire
- galvanized steel
6091 Wall and beam bracket
- mounting angle 0˚ or 25˚
- galvanized steel
6505.076.00 Adjustable rail bracket
- steel plate with epoxy coating
- product code includes two brackets that are
needed for the mounting of one luminaire
98
6083.901.00 Mounting rail
- for the so-called double mounting of
horizontal or regular luminaires
- long mounting rail 6083.901.00, length
1550 mm
TP10913L Mounting rail for horizontal and regular luminaires
- included in the structure of the luminaire
99
Track mounting system
A track mounting system has been
developed to facilitate service. The
system allows the luminaires to be
transferred to the service area on a
track rail, and back again after service.
Track mounting system for less than 8 luminaires:
- If 8 luminaires are mounted behind one winder, the winder can be used to transfer the
luminaires to service area and back
Track mounting system for more than 8 luminaires:
- There are also mechanisms suited for transferring more than 8 luminaires with one winder,
but then a different kind of winder needs to be used. In this case, the luminaires are manually
pulled into the service area and brought back using a winder. These need to be discussed on a
case-by-case basis
More information
- The length of one mounting track rail is 6 m
- The maximum length of the rail is 40 m
- The distance between joiners is 1.5 m in a service area, 3 m elsewhere
- Wire Ø 2 is needed for approx. three times the total length
- The distance between the luminaires is determined by the length of the luminaire wire between them
- The branch circuit is attached to the luminaire wire by cable ties
- Two cable wagons may be installed between the luminaires if the wired cables hang too low
Wagon
6097 (TP10393)
Winder
6082 (TP10404)
Branch circuit
(E.g., VSK 5 x 2.5 S)
100
PRODUCT CODE
6096.000.00
6097.000.00
6098.000.00
PRODUCT
Mounting track rail 6 m
Luminaire wagon
Cable wagon
6081.000.00
6082.000.00
VJA12
VRE60
Idler wheel
Winder
Rail connector
Rail suspension
Accessories for suspension rails
DESCRIPTION
Delivered as 6 m rails
Cable wagon to support the cable.
Prevents the luminaires from colliding.
Not included in I-Valo's deliveries, 2 pcs/joint required
Not included in I-Valo's deliveries
Cable wagon
6098
Idler wheel
6081
Luminaire
Horizontal/Regular
101
Rail connector
Rail suspension

Product Catalogue 2010

Transcription

Similar documents