hose guide - Pirtek USA

Transcription

HOSE GUIDE
1
PFMU - 18
High Pressure Hose
Construction
Inner Tube: Oil resistant synthetic rubber.
Reinforcement: Spiraled high tensile steel wire.
Cover: Black synthetic rubber, abrasion resistant
PIRTEKTOR cover - MSHA approved.
Features
Will handle petroleum based hydraulic fluids, air, and
lubricating oils.
Conforms to SAE 1754B.
Temperature Range
-40° F to +210° F. Air Max +158° F, Water +185° F.
Application
Medium to high pressure hydraulic oil lines.
Nominal I.D.
Inches
mm
1 1/2
40
Type
PFMU18-24
Burst Pressure
4 times working pressure (4:1 safety factor)
Hose I.D.*
Wire O.D.*
Min
Max
Min
Max
Radius
(PSI)
1.484
1.547
1.937
2.031
2.043
2.110
17
2500
High Pressure Hose
Features
Will handle petroleum based hydraulic fluids, air, and
lubricating oils.
Conforms to SAE 1754B.
Temperature Range
Application
mm
1 1/4
32
WP
Max
Construction
Inner Tube: Oil resistant synthetic rubber.
Inches
Bend*
Min
PFMU - 21
Nominal I.D.
Hose O.D.*
Type
PFMU21-20
Burst Pressure
Hose I.D.*
Wire O.D.*
Hose O.D.*
Bend*
WP
Min
Max
Min
Max
Min
Max
Radius
(PSI)
1.236
1.299
1.681
1.776
1.787
1.854
13 1/2
3000
2
PFMU - 25
High Pressure Hose
Construction
Inner Tube: Oil and heat resistant synthetic rubber.
Reinforcement: Braided high tensile steel wire or
spiraled high tensile steel wire.
Features
Will handle petroleum based hydraulic fluids, air, diesel
fuels and lubricating oils.
Conforms to SAE 1754B, 1942-1, ISO18752.
Sizes -04 to -16, US Coast Guard approved.
Temperature Range
Application
Nominal I.D.
Inches
mm
1/4
6.5
3/8
Type
Burst Pressure
Hose I.D.*
Wire O.D.*
Hose O.D.*
Bend*
WP
Min
Max
Min
Max
Min
Max
Radius
(PSI)
PFMU25-04
0.244
0.276
0.382
0.413
0.445
0.500
3
3600
9.5
PFMU25-06
0.366
0.398
0.520
0.567
0.591
0.665
4
3600
1/2
13
PFMU25-08
0.484
0.531
0.642
0.697
0.709
0.776
6
3600
5/8
16
PFMU25-10
0.610
0.657
0.811
0.866
0.913
0.980
7
3600
3/4
19
PFMU25-12
0.740
0.780
0.976
1.031
1.059
1.126
8 3/4
3600
1
25
PFMU25-16
0.984
1.039
1.280
1.343
1.354
1.441
11
3600
1 1/4
32
PFMU25-20
1.236
1.299
1.646
1.740
1.748
1.854
12 1/2
3600
1 1/2
38
PFMU25-24
1.484
1.547
1.882
1.961
2.043
2.169
17
3600
2
51
PFMU25-32
1.984
2.047
2.449
2.528
2.618
2.744
22 1/2
3600
PFMU - 35
High Pressure Hose
Construction
Reinforcement: Braided high tensile steel wire.
Features
US Coast Guard approved.
ABS Approved
Application
Temperature Range
Burst Pressure
Nominal I.D.
Inches
mm
1/4
6.5
3/8
Type
Hose I.D.*
Wire O.D.*
Hose O.D.*
Bend*
WP
Min
Max
Min
Max
Min
Max
Radius
(PSI)
PFMU35-04
0.244
0.276
0.417
0.457
0.500
0.555
3 1/2
5000
9.5
PFMU35-06
0.366
0.398
0.575
0.622
0.646
0.709
4 3/4
5000
1/2
13
PFMU35-08
0.484
0.531
0.689
0.748
0.768
0.846
6 3/4
5000
5/8
16
PFMU35-10
0.610
0.657
0.874
0.937
0.953
1.031
7 1/2
5000
3
PFMU - 35S
High Pressure Hose
Construction
Features
ABS Approved
Application
Temperature Range
Burst Pressure
Nominal I.D.
Inches
mm
3/4
19
1
Type
Hose I.D.*
Wire O.D.*
Hose O.D.*
Bend*
WP
Min
Max
Min
Max
Min
Max
Radius
(PSI)
PFMU35S-12
0.740
0.780
1.059
1.122
1.157
1.236
10 1/4
5000
25
PFMU35S-16
0.984
1.039
1.343
1.406
1.457
1.535
14 1/4
5000
1 1/4
32
PFMU35S-20
1.236
1.299
1.646
1.740
1.748
1.854
15 3/4
5000
1 1/2
38
PFMU35S-24
1.484
1.547
2.091
2.185
2.197
2.315
19 3/4
5000
2
51
PFMU35S-32
1.984
2.047
2.634
2.728
2.736
2.862
24 3/4
5000
PFMU - 42
Ultra High Pressure Hose
Construction
Features
Application: Ultra high pressure hydraulic oil lines.
Temperature Range
Burst Pressure
Nominal I.D.
Inches
mm
1/4
6.5
3/8
Type
Hose I.D.*
Wire O.D.*
Hose O.D.*
Bend*
WP
Min
Max
Min
Max
Min
Max
Radius
(PSI)
PFMU42-04
0.244
0.276
0.425
0.465
0.484
0.547
4
6000
9.5
PFMU42-06
0.366
0.398
0.661
0.709
0.811
0.874
6
6000
1/2
13
PFMU42-08
0.484
0.531
0.787
0.835
0.937
1.000
8
6000
5/8
16
PFMU42-10
0.610
0.657
0.921
0.976
1.091
1.154
9
6000
5/8
16
PFMU42HB-10
0.610
0.657
0.870
0.902
0.909
0.972
4 1/2
6000
3/4
19
PFMU42-12
0.740
0.780
1.059
1.122
1.173
1.236
10 1/4
6000
1
25
PFMU42-16
0.984
1.039
1.374
1.437
1.480
1.567
13
6000
1 1/4
32
PFMU42-20
1.236
1.299
1.795
1.890
1.902
2.020
17
6000
1 1/2
38
PFMU42-24
1.484
1.547
2.091
2.185
2.197
2.315
20 1/2
6000
2
51
PFMU42-32
1.984
2.047
2.638
2.756
2.776
2.894
27 1/2
6000
4
100STH
Teflon Medium Pressure Smooth Bore Hose
Construction
Inner Tube: Extruded white PTFE tube.
Reinforcement: Stainless steel wire braid.
Features
Will handle petroleum
based hydraulic fluids, diesel fuels and lubricating oils.
Application
Automotive, transportation, food and beverage and
injection molding.
Temperature Range
-65° F to +450° F For more information on specific high
temperature ratings please contact your local Pirtek Center.
Burst Pressure
4 times WP (4:1) as below at 71°
Nominal I.D.
Type
Hose O.D.*
Bend*
Vacuum
WP
Nominal
Radius
Hg
(PSI)
Inches
mm
3/16
5
100STH-03
0.30
2
28.90
3000
1/4
6.5
100STH-04
0.37
2 3/8
28.90
3000
5/16
8
100STH-05
0.40
4
28.90
2500
3/8
10.5
100STH-06
0.49
2 1/4
28.90
2250
1/2
13
100STH-08
0.59
5 1/2
28.90
1750
5/8
16
100STH-10
0.80
6 1/2
15.00
1500
3/4
19
100STH-12
0.87
7 1/2
15.00
1100
1
25
100STH-16
1.15
10 3/4
13.00
900
SAE 100R2/AT
High Pressure Hose
Construction
Features
Conforms to SAE EN 853 2SN, SAE 1942-1.
Application
Temperature Range
Burst Pressure
Nominal I.D.
Inches
mm
1 1/4
32
1 1/2
2
Type
Hose I.D.*
Wire O.D.*
Hose O.D.*
Bend*
WP
Min
Max
Min
Max
Min
Max
Radius
(PSI)
100R2AT-20
1.236
1.299
1.705
1.799
1.854
1.949
16 1/2
1800
38
100R2AT-24
1.484
1.547
1.953
2.047
2.098
2.201
19 3/4
1300
51
100R2AT-32
1.984
2.047
2.453
2.547
2.598
2.701
25 1/2
1140
5
SAE 100R4
Medium Pressure Textile Braided Hose
Construction
Application
Inner Tube: Seamless black synthetic rubber.
Reinforcement: One braid of textile fiber with two helix wires
to prevent collapse under vacuum.
Cover: Black synthetic rubber. Resistant to abrasion, fuel
and weathering.
Petroleum and water-based hydraulic fluids in suction lines or
in low pressure return lines. Suction up to 28 in. of mercury.
Temperature Range
Meets or exceeds SAE 100R4 requirements.
Nominal I.D.
Type
Hose O.D.
Min Bend
Pressures (PSI)
Max
Radius
Working
Inches
mm
3/4
19
100R4-12
1.380
5.0
300
1
25
100R4-16
1.630
6.0
250
1 1/4
32
100R4-20
2.000
8.0
200
1 1/2
38
100R4-24
2.250
10.0
150
2
51
100R4-32
2.750
12.0
100
2 1/2
63.5
100R4-40
3.250
14.0
62
3
76
100R4-48
3.780
18.0
56
SAE 100R5
Medium Pressure Textile Braided Hose
Construction
Reinforcement: One textile braid and one braid of high
tensile steel wire.
Cover: Black textile braid impregnated with rubber,
resistant to oil, fuel and weathering.
diesel fuels, lubricating oils and anti-freeze solution.
Meets SAE 1402 standard for automotive air brake hose
and hose assemblies.
Temperature Range
-40° F to +302° F the maximum working pressure shown
in the table are for service up to a maximum of 212° F.
Exceptions: Air - Max +158° F, Water - Max +185° F. For
more information on specific high temperature ratings
please contact your local Pirtek Center.
Application
Medium pressure hydraulic oil lines.
Features
Will handle petroleum based hydraulic fluids, air, water,
Nominal I.D.
Inches
mm
3/16
5
1/4
Type
Hose I.D.*
Hose O.D.*
Bend*
WP
Min
Max
Min
Max
Radius
(PSI)
100R5-04
0.19
0.20
0.50
0.54
3
3000
6.5
100R5-05
0.25
0.28
0.56
0.60
3 1/2
3000
5/16
8
100R5-06
0.31
0.34
0.66
0.69
4
2250
13/32
10.5
100R5-08
0.41
0.44
0.74
0.79
4 1/2
2000
1/2
13
100R5-10
0.50
0.54
0.90
0.94
5 1/2
1750
5/8
16
100R5-12
0.63
0.67
1.06
1.10
6 1/2
1500
7/8
22
100R5-16
0.87
0.92
1.20
1.27
7 1/4
800
1 1/8
29
100R5-20
1.13
1.17
1.47
1.53
9
625
1 3/8
35
100R5-24
1.37
1.42
1.72
1.78
10 1/2
500
1 13/16
46
100R5-32
1.81
1.86
2.17
2.27
13 1/4
350
6
100R7
Thermoplastic Medium Pressure Hose
Construction
Polyester core tube with fiber reinforcement. All layers
bonded. Standard cover is black and perforated for
pneumatic service.
Ideal for use at low temperature on fork trucks in
refrigerated warehouses.
Features
Meets or exceeds SAE 100R7 specifications.
Applications
Medium pressure hydraulic and pneumatic service. For
hydraulic and pneumatic circuits and systems found
on agricultural, industrial, and construction equipment.
Nominal I.D.
Temperature Range
-70°F to +212°F (-57°C to 100°C) except limited to
+135°F (+57°C) for synthetic hydraulic fluids and water
based fluids.
Type
Hose O.D.*
Bend*
WP
Maximum
Radius
(PSI)
Inches
mm
1/8
3/16
3
5
100R7-02
100R7-03
0.34
0.43
1/2
3/4
3000
3250
1/4
6.5
100R7-04
0.51
1 1/4
3000
5/16
8
100R7-05
0.57
1 3/4
2500
3/8
9.5
100R7-06
0.65
2
2250
1/2
13
100R7-08
0.81
3
2000
Also available in Twinline Hose. For Twinline Hose part number place T after 100R7.
100R7NC
Thermoplastic Medium Pressure Non-Conductive Hose
Construction
Polyester core tube, fiber reinforcement, abrasion
resistant. Special electrically non-conductive polyester
cover. High density braid for maximum impulse life
without loss of flexibility. Standard cover is orange,
non-perforated.
Features
Meets or exceeds SAE 100R7 specifications for nonconductive hose.
Temperature Range
based fluids .
Applications
Medium pressure hydraulic and pneumatic service.
For hydraulic systems found on industrial, and mobile
equipment.
Nominal I.D.
Type
Hose O.D.*
Bend*
WP
Maximum
Radius
(PSI)
Inches
mm
3/16
5
100R7NC-03
0.43
3/4
3250
1/4
6.5
100R7NC-04
0.51
1 1/4
3000
5/16
8
100R7NC-05
0.57
1 3/4
2500
3/8
9.5
100R7NC-06
0.65
2
2250
1/2
13
100R7NC-08
0.81
3
2000
7
100R8
Thermoplastic High Pressure Hose
Construction
Nylon core tube, aramid reinforcement, abrasion
resistant urethane cover. All layers bonded. Standard
cover is black and perforated for pneumatic service.
in a minimum O.D. hose. Ideal for use in hot water
applications. Not recomended for use over the sheave.
Features
Aramid reinforcement for compact strength and flexibility.
Applications
Hydraulic and pneumatic circuits and systems. Replaces
100R2 rubber hose wherever greater flexibility,
fluid compatibility and cover durability are required,
lighter weight and smaller O.D. than 100R2. Aramid
reinforcement yarn provides low volumetric expansion
Nominal I.D.
Temperature Range
-40°F to +212°F (-40°C to 100°C).
Type
Hose O.D.*
Bend*
WP
Maximum
Radius
(PSI)
Inches
mm
3/16
5
100R8-03
0.43
1 1/2
5000
1/4
6.5
100R8-04
0.51
2
5000
5/16
8
100R8-05
0.57
2 1/2
4500
3/8
9.5
100R8-06
0.65
2 1/2
4000
1/2
13
100R8-08
0.81
4
3500
100R8NC
Thermoplastic High Pressure Non-Conductive Hose
Construction
Nylon core tube, fiber reinforcement, abrasion resistant
cover. All layers bonded for optimum kink resistance and
flexibility. High density braid for maximum impulse life without
loss of flexibility. Standard cover is orange, non-perforated.
in a minimum O.D. hose. Ideal for use in hot water
applications. Not recomended for use over the sheave.
Features
Aramid reinforcement for compact strength and flexibility.
Meets or exceeds SAE 100R8 requirements for nonconductive hose.
Applications
Hydraulic and pneumatic circuits and systems. Replaces
100R2 rubber hose wherever greater flexibility,
fluid compatibility and cover durability are required,
lighter weight and smaller O.D. than 100R2. Aramid
reinforcement yarn provides low volumetric expansion
Nominal I.D.
Temperature Range
based fluids .
Type
Hose O.D.*
Bend*
WP
Maximum
Radius
(PSI)
Inches
mm
3/16
5
100R8NC-03
0.43
1 1/2
5000
1/4
6.5
100R8NC-04
0.51
2
5000
5/16
8
100R8NC-05
0.57
2 1/2
4500
3/8
9.5
100R8NC-06
0.65
2 1/2
4000
1/2
13
100R8NC-08
0.81
4
3500
8
100AC5
Air Conditioning Hose
Barrier Air Conditioning Hose 13/32
Construction
Inner Tube: Chlorinated Polyethylene.
Reinforcement: PVA spiral reinforcement.
Cover: EPDM for heat & ozone resistance.
Features
Low effusion capabilities, good vacuum characteristics.
Meets or Exceeds SAE J 2064.
Temperature Range
-20F to +250F.
Application
Ait conditioning using refrigerants.
Size
Nominal I.D.
Hose ID
Hose OD
Bend
Inches
MM
MM
Inch
MM
Inch
Radius
6
5/16
8
7.87
0.31
19.10
0.75
3
8
13/32
10.5
10.60
0.42
23.00
0.91
3 3/4
10
1/2
13
12.78
0.50
35.40
1.00
4
12
5/8
16
16.20
0.64
28.60
1.12
4 1/2
100R5HT
High Temperature Textile Braided Hose
Construction
Inner Tube: Synthetic rubber.
Reinforcement: One textile braid and one braid of high
tensile steel wire.
Cover: Blue polyester braid.
Features
Will handle petroleum based hydraulic fluids, air, water
and fuel. Meets or Exceeds SAE J517 (100R5).
Temperature Range
-55 F to +302 F. Air Max +250 F. Water Max +150 F. For
more information on specific high temperature ratings
please contact your local Pirtek Center.
Application
Low to medium pressure hose.
Type
100R5HT-04
100R5HT-06
100R5HT-08
100R5HT-10
100R5HT-12
100R5HT-16
100R5HT-20
Hose ID
Inches
3/16
5/16
13/32
1/2
5/8
7/8
1 1/8
Hose OD
mm
5
8
10.5
13
16
22
29
Inches
0.52
0.67
0.76
0.93
1.08
1.27
1.50
9
mm
13.2
17.3
19.6
23.4
27.4
31.2
38.1
Min Bend
Radius
Inches
3
4
4 1/2
5 1/2
6 1/2
7 1/4
9
Max WP
(PSI)
3000
2250
2000
1750
1500
800
625
PJK
High Pressure Hose
‘PIRTEK PIRJACK PJK-04 1/4’ (6.5 mm) WP 10,000 psi 9 700 bar) STATIC . PIRTEKTOR Cover MSHA 1C 40-26 IJ1OO www.pirtekusa.com
Construction
Inner Tube: Nitrile.
Features
Will Handle petrolium based hydraulic fluids, and
lubricating oils.
Temperature Range
-40° F to +120° F.
Application
Static Jack Hose.
PIRJACK Hose as a 2:1 design factor. Meets Flame
resistance designation MSHA 1C 40-26. Pirtektor
abraision resistant cover.
Nominal I.D.
Inches
mm
1/4
6.5
Type
PJK-04
Hose I.D.*
Hose O.D.*
Bend*
WP
Inches
mm
Inches
mm
Radius
(PSI)
1/4
6.5
0.52
13.1
3
10,000
10
The Benefits of Using PIRTEK
ETA 1 Hour On-Site
24 Hours – 7 Days
Removal & Installation
Assemble Hoses On-Site
Wide Range of Inventory
Metric Specialists
National – Regional Network
Hose Cleaning
Hose Tagging
Reduce Costly Downtime
11

hose guide - Pirtek USA

Transcription

Similar documents