Learjet Approved Suppliers Listing
Transcription
Learjet Approved Suppliers Listing
Learjet Approved Suppliers Listing by Suppliers Name (Alphabetical) Internet Version Note: EMCM is applicable to Learjet programs only when specifically called out by respective Engineering Specifications New QAD Release Please read new QD revision and implement change (s), If applicable to your company. Forward us your comments, if applicable. QAD 4.6-1 Rev. C – Oct. 2, 2015 Learjet Inc. Quality Requirements for Suppliers Extract from SAP as of: Monday, October 3, 2016 Questions? - Corrections! See next page - Voir page suivante QUESTIONS? - CORRECTIONS! Please review your company information and forward us your comments on inaccurate or missing data... Contact us via eMail eMail [email protected] Click this link (Do not remove the Subject “ASL Comment:” You may add your subject text after) Add in your eMail, your Bombardier supplier code (SAP) with a description of the requested correction/change/comment… Thank You SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification (DMC) DESIGNED METAL CONNECTIONS, I, 0000107235 14800 S. FIGUEROA ST. GARDENA, CA US, 90248 TEL: 310 323 6200-... FAX: 310 217 3177 Class: C MANUFACTURER 1424199 ONTARIO INC. O/A DONOVAN &, 0000132839 3600B LAIRD ROAD, UNIT 5 MISSISSAUGA, ON CA, L5L 6A7 TEL: 905 607 0706-223 FAX: 905 607 2393 Class: H COMMERCIAL OFF THE SHELF 2V INDUSTRIES, INC., 0000134672 48553 WEST ROAD WIXOM, MI US, 48393 TEL: 248 624 7943-214 FAX: 248 624 1824 Class: C MANUFACTURER 3 POINTS AVIATION CORP., 0000136328 91 WATTS AVENUE CHARLOTTETOWN, PE CA, C1E 2B7 TEL: 902-628-8846 FAX: 902-628-8838 Class: E MAINTENANCE ORGANIZATION 3M, 0000108947 22614 RT 84 N CORDOVA, IL US, 61242-9779 TEL: 309 654 2291- FAX: 309 654 2256 Class: C MANUFACTURER 3M, 0000108948 801 MARQUETTE N. PRAIRIE DU CHIEN, WI US, 53821-1132 TEL: 608 326 2466 FAX: 608 326 5277 Class: C MANUFACTURER 3M, 0000100179 3M CENTER BLDG 209 ST-PAUL, MN US, 55144-1000 Class: C MANUFACTURER Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM-001 Manufacturer Page 3 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 800 235 2376-1 FAX: 651-736-5303 3M, 0000100185 1601 SHAMROCK AVE. S. MONROVIA, CA US, 91016-4248 TEL: 626 358 0136 FAX: 626 303 6559 Class: C MANUFACTURER 3M, 0000108960 1640 WESTERN AVE. AUBURN, WI US, 54829 TEL: 715 822 8501 FAX: 715 822 8506 Class: C MANUFACTURER 3M, 0000108970 710 STATE ST. N. FAIRMONT, MN US, 56031-3851 TEL: 507-235-3391 FAX: 507 235 2182 Class: C MANUFACTURER 3M, 0000108971 5400 ROUTE B COLUMBIA, MO US, 65202-9348 TEL: 573 474 8521 FAX: 573 886 1459 Class: C MANUFACTURER 3M, 0000108976 HWY. 377 S. BROWNWOOD, TX US, 76801 TEL: 325 646 3551 FAX: 325 646 5863 Class: C MANUFACTURER 3M, 0000108985 3406 PLEASANT E. KNOXVILLE, IA US, 50138-9597 TEL: 641 828 7000 FAX: 641 828 8939 Class: C MANUFACTURER 3M, 0000107682 610 NORTH BROWN COUNTY ROAD 19 ABERDEEN, SD Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM vendor #935 Page 4 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 57401-3334 TEL: 605 229 5002 FAX: 800 435 3082 3M, 0000109002 0304S-075E CROSS AVE. HARTFORD CITY, IN US, 47348 TEL: 765 348 3200 FAX: 765 348 1638 Class: C MANUFACTURER 3M, 0000109060 7341 ANACONDA AVE. GARDEN GROVE, CA US, 92841-2921 TEL: 714 373 2837 FAX: 800 435 3082 Class: C MANUFACTURER 3M CANADA COMPANY, 0000102934 1840 OXFORD ST. E. LONDON, ON CA, N6A 4T1 TEL: 519 452 6019 FAX: 519 452 6080 Class: C MANUFACTURER 3M CHELMSFORD, 0000108938 279 BILLERICA ROAD CHELMSFORD, MA US, 01824-4180 TEL: 978 256 3911 FAX: 978 250 1847 Class: C MANUFACTURER 3M CO., 0000119992 2120 EAST AUSTIN BLVD. NEVADA, MO US, 64772 TEL: 905 602 3855 FAX: 888 452 8053 Class: C MANUFACTURER 3M CO., 0000118546 1425 STOKKE PKWY. MENOMONIE, WI US, 54751-4920 TEL: 715-578-2611 FAX: 715 578 2624 Class: C MANUFACTURER 3M COMPANY, 0000130540 7341 ANACONDA AVE. Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 5 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval GARDEN GROVE, CA US, 92841 TEL: 800 410 6880 FAX: 800 263 3489 3M COMPANY, 0000108378 30 COMMERCE ROAD ROCKLAND, MA US, 02370-1053 TEL: 781 331 5900 FAX: 781 871 0065 Class: C MANUFACTURER 3M COMPANY, 0000130541 3047 ELM POINT INDUSTRIAL DR. ST-CHARLES, MO US, 63301 TEL: 636 946 2100 FAX: 636 946 0414 Class: D DISTRIBUTOR 3M COMPANY, ACTING THOUGH 1ATD, 0000133993 905/915 ADAMS ST. SE HUTCHINSON, MN US, 55350 TEL: 651 733 9356 FAX: 651 736 5067 Class: C MANUFACTURER H COMMERCIAL OFF THE SHELF 3M FRANCE, 0000109869 ROUTE DE SANCOURT TILLOY LEZ CAMBRAI, 59 FR, 59554 TEL: 27 73 34 34 FAX: 27 73 34 40 Class: C MANUFACTURER 3M MEXICO S.A. DE C.V., 0000120207 AV. C.F.E. NO. 520 SAN LUIS POTOSI, SLP MX, 78395 TEL: 55 5270 2261 FAX: 55 5270 2161 Class: C MANUFACTURER 3M SPECIALITY ADHESIVES, 0000101162 3211 CHESTNUT EXPRESSWAY E. SPRINGFIELD, MO US, 65802-2540 TEL: (417) 869-3501 FAX: (417) 869-4235 Class: C MANUFACTURER 3V FASTENERS, Class: 0000106652 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM 471 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 6 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 320 REED CIRCLE CORONA, CA US, 92879-1349 TEL: 951 734 4391-229 FAX: 951 734 9488 C MANUFACTURER 810 KOBE STEEL LTD., 0000108489 NO. 2 KOGYO DANCHI, 15 KINUGAOKA MOKA CITY, 09 JP, 3214367 TEL: 285-82-4111 FAX: 285-84-0231 Class: C MANUFACTURER A & C AMERICAN CHEMICALS LTD., 0000110394 3010 DE BAENE ST. MONTREAL, QC CA, H4S 1L2 TEL: 514 336 1493 FAX: 514 336 1768 Class: C MANUFACTURER A & C PRODUCTS, 0000117344 9521 MIDDLEX DR. SAN ANTONIO, TX US, 78217-5915 TEL: 800-249-8676 FAX: 210-930-4582 Class: B EQUIPMENT SUPPLIERS A & P TECHNOLOGY, 0000108816 4595 E. TECH DR. CINCINNATI, OH US, 45245-1055 TEL: 513 688 3200 FAX: 513 688 3201 Class: C MANUFACTURER A D METAL SPINNERS LIMITED, 0000133832 56-60 SHELLEY ROAD, BOSCOMBE BOURNEMOUTH, DO GB, BH1 4HY TEL: 01202309090 FAX: 514 855 5000 Class: A SUBCONTRACTORS A POOLE & SONS LTD., 0000109871 HEWELL ROAD REDDITCH, WC GB, B97 6AY TEL: 01527 63676 FAX: 01527 60136 Class: A SUBCONTRACTORS Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 7 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification A RAYMOND TINNERMAN MANUFACTURING I, 0000134946 686 PARKDALE AVENUE NORTH HAMILTON, ON CA, L8N 3K1 TEL: 1 330 220 5337 FAX: 1 330 558 0849 Class: C MANUFACTURER A.E. BLAKE SALES LTD., 0000106666 3588 POIRIER ST-LAURENT, QC CA, H4R 2J5 TEL: 514 332 4214-225 FAX: 514 332 2860 Class: A SUBCONTRACTORS D DISTRIBUTOR A.E. PETSCHE CANADA INC., 0000107284 16643 HYMUS KIRKLAND, QC CA, H9H 4R9 TEL: 514-426-9405 FAX: 514-426-0365 Class: D DISTRIBUTOR A.E. PETSCHE CO. INC., 0000104906 2112 W. DIVISION ST. ARLINGTON, TX US, 76012-3605 TEL: 514-426-9405 FAX: 514 426 0365 Class: A SUBCONTRACTORS D DISTRIBUTOR A.E. PETSCHE CO. INC. - UK, 0000119187 UNIT 37 SUTTONS BUSINESS PARK EARLEY, RE GB, RG6 1AZ TEL: 1189 693230 FAX: 1189 690037 Class: D DISTRIBUTOR A.E. PETSCHE CO. S DE RL DE CV, 0000121300 CARRETERA ESTATAL 200 COLON, QRO MX, 76270 TEL: 442 101 7500 FAX: 442 314 2158 Class: D DISTRIBUTOR J LOGISTIC PROVIDER A.E. PETSCHE CO., INC., 0000132845 BLVD LUIS DONALDO COLOSIO#1179 NOGALES, SON MX, 84048 Class: C MANUFACTURER Learjet Approved Suppliers Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limitation to class A supplier for drawing 81150007only Page 8 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 817 548 6776 FAX: 913 981 6848 A.M. CASTLE & CO., 0000107205 835 SELKIRK AVE. POINTE-CLAIRE, QC CA, H9R 3S2 TEL: 9058164085 FAX: 514 695 3281 Class: D DISTRIBUTOR A.M. CASTLE METAL MATERIALS (SHANGH, 0000134101 258 NORTH RIYING ROAD, WAIGAOQIAO FREE T SHANGAI, 020 CN, 200131 TEL: 86 21 5046 3699 FAX: 86 21 5046 357 Class: D DISTRIBUTOR A.S.A.P. TECHNOLOGIES INC., 0000108188 1835 LEE COURT S. BUFORD, GA US, 30518-8810 TEL: 770 614 1559 FAX: 770 614 7636 Class: D DISTRIBUTOR AAA AIR SUPPORT MFG., 0000118298 205 SOUTH PIRNER DRIVE HAYSVILLE, KS US, 67060 TEL: 316 946 9299 FAX: 316 946 9720 Class: C MANUFACTURER AADFW INC., 0000106654 1350 WESTPARK WAY EULESS, TX US, 76040 TEL: 817 540 0153 FAX: 817 540 0886 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS Page 9 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS INDEPENDANT LABORATORY AADOX MFG. CO. INC., 0000110268 938 S.E. ``M`` ST. GRANTS PASS, OR US, 97528 TEL: 541 472 0100 FAX: 541 472 0200 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to NAS 427 components family. AAR AIRCRAFT COMPONENT SERVICES, 0000101520 747 ZECKENDORF BLVD. GARDEN CITY, NY US, 11530-2110 TEL: 516 357 2764 FAX: 5163572778 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval QW1R441K & EASA dual approval EASA.145.4003. AAR COMPOSITES, 0000124863 5307 LUCE AVE., BLDG. 243, BAY E MCCLELLAN, CA US, 95652-2440 TEL: 916-566-6000 FAX: 727-330-4006 Class: C MANUFACTURER F STRUCTURAL SUPPLIER Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS BAPS 188-08 MACHINING OF COMPOSITES BAPS 260-010 MACHINING, FORMING AND PREPARATION OF NON-METALLIC HONEYCOMB CORE FOR LAY-UP IN SANDWICH COMPONENTS BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Touch-up only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Touch-up only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual riveting only BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES Page 10 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Limitation: Limited Conditional Approval Pending Drilling Qualification per CM00014. AAR COMPOSITES, 0000101202 14201 MYERLAKE CIR. CLEARWATER, FL US, 33760-2824 TEL: 727 539 8585 FAX: 727 539 0316 Class: C MANUFACTURER D DISTRIBUTOR AAR CORP., 0000106197 1100 WOOD DALE ROAD WOOD DALE, IL US, 60191-1060 TEL: 630 2272833 FAX: 630 227 2745 Class: D DISTRIBUTOR AAVID THERMALLOY, 0000109063 70 COMMERCIAL ST. CONCORD, NH US, 03301-5031 TEL: 603 224 9988 FAX: 603 223 1744 Class: C MANUFACTURER AB INTERCONNECT, 0000108848 2500 U.S. 70 BUSINESS E. SMITHFIELD, NC US, 27577 TEL: 919-934-5181 FAX: 919 934 5186 Class: C MANUFACTURER ABB ATLV, 0000110427 3299 J.-B. DESCHAMPS LACHINE, QC CA, H8T 3E4 TEL: 514 420 3100 FAX: 514 420 3137 Class: H COMMERCIAL OFF THE SHELF ABBEY METAL FINISHING CO. LTD., 0000130479 UNIT 2, DODWELLS BRIDGE INDUTRIAL ESTATE HINCKLEY, LE GB, LE103BZ TEL: 1455 637284 FAX: 999 999 9999 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-5A CORROSION TESTING BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Page 11 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY ABBOTEC INC., 0000102235 101 CANYON CT. WEATHERFORD, TX US, 76087-9227 TEL: 817 441 1570 FAX: 817 441 2460 Class: C MANUFACTURER ABBOTT TECHNOLOGIES INC., 0000103436 8203 VINELAND AVE. SUN VALLEY, CA US, 91352-3956 TEL: 818 504 0644 FAX: 818 768 0395 Class: B EQUIPMENT SUPPLIERS ABIPA CANADA INC., 0000106655 3700 AVE. DES GRANDES TOURELLES BOISBRIAND, QC CA, J7H 0A1 TEL: 450-937-5888-249 FAX: 450-963-8881 Class: A SUBCONTRACTORS Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING Page 12 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: LIMITED TO TOUCH-UP OF RIVET HEAD AND NONE FLAT AREA BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: LIMITED TO TOUCH-UP OF RIVET HEAD AND NONE FLAT AREA BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to IFF-MM and GND-MM assembly of grounding studs. BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Limited to installation of cutter pin BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: LIMITED TO MANUAL SQUEESE RIVETING BAPS 157-27 INTEGRAL FUEL TANK SEALING Limitation: LIMITED TO (1) FILLET SEALING ON FASTENERS AND BUSHING, (2) WET Limitation: INSTALLATION OF FASTENERS, (3) FAYING SURFACE SEALING OF NUT-PLATE AND Limitation: BUSHING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: LIMITED TO (1) FILLET SEALING ON FASTENERS AND BUSHING, (2) WET Limitation: INSTALLATION OF FASTENERS, (3) FAYING SURFACE SEALING OF NUT-PLATE AND Limitation: BUSHING BAPS 172-34 FUSION WELDING Limitation: Limited to Limitation: Group: No IIA, IIB, IV Limitation: Position: 1F, 2F, 1G Limitation: Thickness: 0.034 to 0.200 BAPS 174-02 FABRICATION OF PLUMBING LINES Limitation: Limited to aluminum tube bending, aluminum tube beaded and pressure testing. BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: LIMITED TO COOLING ONLY, LIQUID NITROGEN BAPS 188-02 COLD WORKING OF HOLES Limitation: Limited to Type I MPS 250-225 INSTALLATION OF SOLID RIVETS Limitation: LIMITED TO MANUAL SQUEESE RIVETING Page 13 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval AC PRODUCTS INC., 0000109283 9930 PAINTER AVE. WHITTIER, CA US, 90605 TEL: 562-946-8781-347 FAX: 562-944-9958 Class: C MANUFACTURER ACC SILICONES LTD., 0000130439 AMBER HOUSE, SHOWGROUND ROAD BRIDGWATER, SO GB, TA6 6AJ TEL: 44 1278 411400 FAX: 44 1278 411444 Class: C MANUFACTURER ACC-KP, LLC (AIR COMM CORPORATION T, 0000101192 4554 CLAIRE-CHENNAULT ADDISON, TX US, 75001-5321 TEL: 972 407 1234-128 FAX: 972 407 1571 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION ACCESSORY TECHNOLOGIES CORP., 0000128972 219 CENTRAL AVE. FARMINGDALE, NY US, 11735 TEL: 631 753 2282 FAX: 631 753 2407 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: In accordance with FAA certificat no Y4R0390 and EASA 145.4014 ACCIAIERIE VALBRUNA SPA, 0000129728 VIALE DELLA SCIENZA 25 VICENZA, BZ IT, 36100 TEL: 044496821 FAX: 999 999 9999 Class: C MANUFACTURER ACCOLADE REACTION PROMOTION GROUP, 0000130190 1751 RICHARDSON, SUITE 6.105 MONTREAL, QC CA, H3K 1G6 TEL: 514 939 1980 FAX: 514 907 1457 Class: H COMMERCIAL OFF THE SHELF ACCUFLEET INT., 0000107554 777 BENMAR DR., SUITE 450 HOUSTON, TX US, 77060-3693 Class: A SUBCONTRACTORS E MAINTENANCE ORGANIZATION Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Silcoset #152 Page 14 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 281 999 8800-160 FAX: 281 999 0055 ACCURATE BUSHING CO., 0000101309 443 NORTH AVE. GARWOOD, NJ US, 07027-1014 TEL: 908 789 1121- FAX: 908 789 9429 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER ACCURATE ELASTOMER PRODUCTS INC., 0000106657 1112 SWENSON BLVD. ELGIN, TX US, 78621-3259 TEL: 512 285 4585 FAX: 512 285 9442 Class: C MANUFACTURER ACCURATE PLASTICS INC., 0000123976 18 MORRIS PLACE YONKERS, NY US, 10705-1929 TEL: 800 431 2274-125 FAX: 914 476 0533 Class: C MANUFACTURER ACCURATE SCREW MACHINE CO., 0000106659 10 AUDREY PLACE FAIRFIELD, NJ US, 07004-3402 TEL: 973 244 9200-224 FAX: 973 244 9177 Class: C MANUFACTURER ACE CLEARWATER, 0000125168 19815 MAGELLAN DR. TORRANCE, CA US, 90502-1107 TEL: 310 538 5380 FAX: 310 323 2137 Class: A SUBCONTRACTORS ACE CONTROLS INC., 0000103278 23435 INDUSTRIAL PARK DR. FARMINGTON, MI US, 48335-2855 TEL: 248 476 0213 FAX: 248 476 2470 Class: C MANUFACTURER ACHILLES AEROSPACE PRODUCTS INC, 2100 ENTREPRISE PKWY. TWINSBURG, OH Class: C MANUFACTURER 0000106660 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to MIL-I-24768 phenolic products Page 15 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval US, 44087-2212 TEL: 330-425-8444 FAX: 330-425-8446 ACITURRI AERONAUTICA, S.L.U., 0000132880 C/AYUELAS PARCELA 22, POLIGONO MIRANDA DE EBRO, 09 ES, 09200 TEL: 00947 05 90 00 FAX: 00947 05 90 00 Class: A SUBCONTRACTORS ACKLANDS-GRAINGER INC., 0000108225 90 BEAVER CREEK ROAD W. RICHMOND HILL, ON CA, L4B 1E7 TEL: 905-731-5516 FAX: 905 738 0991 Class: H COMMERCIAL OFF THE SHELF ACME AEROSPACE, 0000102423 528 21TH ST. W. TEMPE, AZ US, 85282-2059 TEL: 480-557-4523 FAX: 480 921 0470 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: according to FAA certificate no FAA certificate no KN6R671N and EASA 145.5058 ACORN SURFACE TECHNOLOGY, 0000109875 CLOVER ST. KIRBY-IN-ASHFIELD, NT GB, NG17 7LJ TEL: 01623 753107 FAX: 01623 754538 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 138-49 APPLICATION OF BAMS 565-013 HEAT RESISTANT COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-23 HARD ANODIZING OF ALUMINUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-43 ION VAPOR DEPOSITION OF ALUMINUM ON STEELS CORROSION RESISTANT STELLS AND TITANIUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS PPS 24.02 ION VAPOUR DEPOSITION PPS 32.01 CROMATE CONVERSION COATING PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME Page 16 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PSPEC 300 PSPEC 410 PSPEC 411 PSPEC 419 ALUMINIUM PSPEC 430 PSPEC 447 PSPEC 910 PENETRANT FLAW DETECTION CHROMIC ACID ANODISING SULPHURIC ACID ANODISING CHEMICAL CONVERSION COATING OF ALUMINIUM AND ALLOYS HARD ANODISING ION VAPOR DISPOSITION ETCH AND EPOXY PRIMING Specification Controlled with Limitations: BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-32 SULFURIC ACID ANODIZING Limitation: Unification Document UD016 ACR ELECTRONICS, INC., 0000129650 5757 RAVENSWOOD ROAD FORT LAUDERDALE, FL US, 33312-6645 TEL: 954 981 3333 FAX: 954 961 4403 Class: C MANUFACTURER ACRA AEROSPACE INC., 0000117960 2121 VIA BURTON ANAHEIM, CA US, 92806-1220 TEL: 714 778 1900 FAX: 714 778 2505 Class: C MANUFACTURER ACROMIL CORPORATION, 0000133102 18421 RAILROAD ST CITY OF INDUSTRY, CA US, 91748-1233 TEL: 626 964 2522 FAX: 626 810 6100 Class: A SUBCONTRACTORS ACTON TECHNOLOGIES INC., 0000108460 100 THOMPSON ST. PITTSTON, PA US, 18640-1437 TEL: 570 654 0612 FAX: 570 654 2810 Class: C MANUFACTURER Specification Controlled: BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Specification Controlled with Limitations: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: to the wet installation and fillet sealing of bushings using injection kits. Page 17 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval ACTRON MFG. INC., 0000101058 1841 RAILROAD ST. CORONA, CA US, 92880-2512 TEL: 951 371 0885-349 FAX: 951-371-1288 Class: B EQUIPMENT SUPPLIERS ADAMS RITE AEROSPACE INC., 0000100924 4141 PALM ST. N. FULLERTON, CA US, 92835-1025 TEL: 714 278 6382 FAX: 714 278 6383 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Approved repair station with rating as specified on FAA Air Agency Certificate # Limitation: A23R362J ADEPT FASTENERS, INC., 0000128008 28709 INDUSTRY DR. VALENCIA, CA US, 91355 TEL: 817-405-0837 FAX: 817-539-5211 Class: D DISTRIBUTOR ADFAST CORPORATION, 0000106662 2670 PAULUS ST-LAURENT, QC CA, H4S 1G1 TEL: 514 337 7534 FAX: 514 745 2969 Class: C MANUFACTURER ADHESIVE PACKAGING SPECIALTIES INC., 103 FOSTER ST. PEABODY, MA US, 01960-5933 TEL: 978 531 3300 FAX: 978 532 8901 0000106663 Class: C MANUFACTURER ADHETEC, 0000130943 ZONE BASTILLAC SUD TARBES, 66 FR, 65000 TEL: 33 0 562 51 8... FAX: 33 0 562 51 7 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER ADRIA AIRWAYS TEHNIKA D.D., ZGORNJI BRNIK 130H BRNIK, 23 Class: E MAINTENANCE ORGANIZATION 0000115580 Page 18 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval SI, 4210 TEL: 386 4 259 40 00 FAX: 1 436 92 33 ADV MANUFACTURING LTD, 0000136366 56 BAYTON ROAD EXHALL POINT, WM GB, CV7 9DX TEL: 44 0 24 76 10... FAX: 44 0 24 76 36 Class: B EQUIPMENT SUPPLIERS ADVANCE TAPES INTL. LTD., 0000108304 VANTAGE WORKS ABBEY MEADOWS, LE GB, LE4 5RA TEL: 116 251 0191 FAX: 116 265 2046 Class: C MANUFACTURER ADVANCED ALLOYS INC., 0000106665 1014 GRAND BLVD. DEER PARK, NY US, 11729-5782 TEL: 800 645 1462 FAX: 631-595-7030 Class: D DISTRIBUTOR ADVANCED ASSEMBLY LLC., 0000125017 20100 E, 32ND PKWY., SUITE 225 AURORA, CO US, 80011-8188 TEL: 800 838 5650-200 FAX: 800 883 7379 Class: C MANUFACTURER ADVANCED CABLE TIES INC., 0000109022 245 SUFFORK LANE GARDNER, MA US, 01440 TEL: 978 630 3900 FAX: 978 630 3999 Class: C MANUFACTURER ADVANCED DATA RESEARCH FLORIDA, 0000106277 7375 BRIELLA DR. BOYNTON BEACH, FL US, 33437-3767 TEL: 248 299 5300 FAX: 248 299 5319 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods ADVANCED ENGINEERING, 6510 BOX SPRING BLVD. Class: C MANUFACTURER 0000107928 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to After Market Aircraft part only. Page 19 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval RIVERSIDE, CA US, 92507-0784 TEL: 951-653-8461 FAX: 951-653-8886 ADVANCED INTERCONNECTIONS CORP., 0000108599 5 ENERGY WAY WEST WARWICK, RI US, 02893-2389 TEL: 800-424-9850 FAX: 401-823-8723 Class: C MANUFACTURER ADVANCED PLASTIC & MATERIAL TESTING, 42 DUTCH MILL ROAD ITHACA, NY US, 14850-9785 TEL: 607 257 8378 FAX: 607 257 1586 Class: A SUBCONTRACTORS 0000108095 Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2E MECHANICAL TESTING: PLASTICS, RUBBERS STATIC AND ELASTIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) Page 20 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAERD-GEN-018-4C TESTING OF THERMAL PROPERTIES (EXPANSIONS, TMA, ETC.) BAERD-GEN-018-4D TESTING OF FLAMMABILITY PROPERTIES BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAERD-GEN-018-5F FUELS, LUBRICANTS, SOLVENTS (FORMERLY IE) BAERD-GEN-018-5G PLASTICS, RUBBERS (FORMERLY 1D) BAERD-GEN-018-5H TEXTILES AND FIBROUS MATERIALS (FORMERLY 1F) INDEPENDANT LABORATORY ADVANCED PRODUCTS CO., 0000107692 33 DEFCO PARK ROAD NORTH HAVEN, CT US, 06473-1129 TEL: 203 985 3128 FAX: 203 234 7233 Class: B EQUIPMENT SUPPLIERS AE AEROSPACE LIMITED, 0000130973 5 DYMOKE ST. HIGHGATE BIRMINGHAM, WM GB, B12 0TA TEL: 0121773 991 FAX: 0121773 991 Class: A SUBCONTRACTORS AEARO TECHNOLOGIES DE BAJA SA DE CV, 0000121718 AV. REFORMA NO. 394, COL CARLOS PACHECO ENSENADA, BC MX, 22890 TEL: 714 262 4050 FAX: 714 508 7806 Class: B EQUIPMENT SUPPLIERS AEARO TECHNOLOGIES LLC, A 3M COMPAN, 650 DAWSON DRIVE NEWARK, DE US, 19713 TEL: 302 292 6303 FAX: 302 738 8305 0000134362 Class: B EQUIPMENT SUPPLIERS AEE AIRCRAFT ELECTRONIC ENGINEERING, STARNBERGER STRASSE 1 SEEFELD, 08 DE, 82229 0000127198 Class: B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to BICCM (Completion Center) ONLY Page 21 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 08152 7773 FAX: 08152 7775 AEHI, INC., 0000136764 15298 EL PRADO ROAD CHINO, CA US, 91710 TEL: 909 606 6998 FAX: 909 606 6885 Class: D DISTRIBUTOR AERCO LTD., 0000109900 LAWSON HUNT IND. PARK, UNIT 16/17 BROADBRIDGE HEATH HORSHAM, SW GB, RH12 3JR TEL: 1403 260206 FAX: 1403 259760 Class: C MANUFACTURER AERISTO, INC, 0000102090 2550 N. GREAT SOUTHWEST PKWY. GRAND PRAIRIE, TX US, 75050 TEL: 800 736 6201 FAX: 817 624 9520 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods AERNNOVA AEROSPACE MEXICO, 0000124804 AV. BENITO JUAREZ 109 QUERETARO, QRO MX, 76220 TEL: 442 227 28 70 FAX: 442 240 93 54 Class: F STRUCTURAL SUPPLIER Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Limited to : Limitation: 1- Oven I.D. 0347-AAM Limitation: 2-Range 125-160F(50-70C) for BAMS 565-001 primer & BAMS 565-002 topcoats BAPS 145-004 INSTALLATION OF MECHANICALLY ATTACHED TERMINALS Limitation: Limited to crimping of contact connectors. BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Limited to Method 1: Lockwire thread assemblies and Lockwire stop bolts with lock nuts. Method 2: Safety cable, cotter pins and turnbuckle; only. Page 22 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limitation to manual application ONLY BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to Type 2: Manual Application with the Prep Pen 1132 only. BAPS 160-31 LOCALIZED BRUSHING PLATING Limitation: Limited to Cadmium Plating Only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to Type 2: Manual Application with the Prep Pen 1132 only. BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Limitation: Limited to Type I, Method C, Form D BAPS 188-02 COLD WORKING OF HOLES Limitation: Limitation to Type I ONLY . AERNNOVA AEROSPACE S.A., 0000108723 PARQUE EMPRESARIAL AERONAUTICO LA RINCONADA, 41 ES, 41309 TEL: 9451 85682 FAX: 9451 85756 Class: F STRUCTURAL SUPPLIER Systems with Limitations: 2101 MRB APPROVAL - MINOR ONLY Specification Controlled: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 188-02 COLD WORKING OF HOLES Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limitation: No electrical bonding allowed on Ground modules, equipment and kevlar parts. BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING Limitation: Limitation: No installation of mock-up units, fiber optic cables or 1/0 AWG aluminium wire. Limitation: No installation of metallic and non-metallic conduit. Spot tying methods not allowed. BAPS 145-004 INSTALLATION OF MECHANICALLY ATTACHED TERMINALS Page 23 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Limitation: Limitation to crimping of contact connectors BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: APPROVED FOR MANUAL APPLICATION ONLY BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: APPROVED TYPE II ONLY BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: APPROVED TYPE II ONLY AERNNOVA AEROSPACE SA SOC. UNIPERSO, POL. IND. LA CORZANILLA PARC 12 BERANTEVILLA, 01 ES, 01211 TEL: 945 33 75 60 FAX: 945 33 75 30 0000127974 Class: F STRUCTURAL SUPPLIER Systems with Limitations: 2101 MRB APPROVAL - MINOR ONLY Limitation: CENTER WING BOX &TAILCONE aircraft components of the C-Series Program Specification Controlled: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-27 INTEGRAL FUEL TANK SEALING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Non-Intrusive methods ONLY BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Limitation to method 1 only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to Type 2, Manual application including Page 24 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval the Prep Pen 1132. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: limitation to type II, manual application AERNNOVA COMPONENTES MEXICO, 0000126195 AV. IND. DE LA TRANSFORMACION 431 QUERETARO, QRO MX, 76220 TEL: 442 227 2870 FAX: 999 999 9999 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS PPS 01.02 FORMING ALUMINUM ALLOYS Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Limitation: Limited to following range temperatures, For Oven ID 899-ACM : 125 – 160°F, (50 – 70°C Limitation: ,For Oven ID 900-ACM : 125 – 200°F (50 – 93°C) BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to Preparation of Electrical Bonding Surface, aluminum parts. Limitation: Treatment Coatings: Alodine and Anodic coat BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to Manual Installation Only. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Page 25 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Limitation: Limited to Type 2 Application Limitation: Limited to Type 2 Application Limitation: Type II only BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: Conductivity Approved and Hardness limited to Rockwell Testing BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: - 1000-ACM for Solution heat treatment (Tº range is 260-550ºC). Limitation: - 2000-ACM & 3000-ACM for artificial aging treatment (Tº range is 100-200ºC). Limitation: - Aluminum alloys with thickness from 0.032 to 0.125 inch including forged material. BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Limitation: Excluding Roller Swaging of Bearings. BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Limitation: Limited to Type 1, Method A, Form A and Type 1, Method C, Form D BAPS 180-01 ALKALINE CLEANING Limitation: This approval is limited to Type 1 BAPS 185-02 SHOT PEENING OF METAL PARTS Limitation: - Limited to Automatic Shot Peening, performed in MS200 Machine S/N: B0100120 (2-wheel Limitation: table peening machine) Only. Limitation: - Limited to perform shot peening within Qualified Working Zone of turn table as specified in Limitation: ITSS-00101 Only. PPS 34.08 EPOXY PRIME Limitation: Limited to application of F19 type only AERNNOVA COMPOSITES, 0000127559 CTRA. MADRID-TOLEDO KM 32 ILLESCAS, 45 ES, 45200 TEL: 925 269567 FAX: 925 269510 Class: A SUBCONTRACTORS Specification Controlled: BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS BAPS 260-014 MANUFACTURING OF STRUCTURAL COMPONENTS VIA AUTOMATED TAPE LAY UP (ATL) BAPS 260-017 AUXILIARY PROCESSING FOR COMPOSITES STRUCTURES CURED AT 350 DEGREE F BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... Specification Controlled with Limitations: Page 26 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limitation to LABELS only AERNNOVA ENGINEERING SOLUTIONS S.A., LEONARDO DA VINCI NO.13 MINANO, 01 ES, 01510 TEL: 945 185 672 FAX: 945 185 756 0000125789 AERO ARC, 0000111183 16634 S. FIGUEROA ST. GARDENA, CA US, 90248-2627 TEL: 310 324 3400-216 FAX: 310 324 9816 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Specification Controlled with Limitations: BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-5E EVALUATION OF PAINTS Limitation: Tests per BATS 4860 ONLY Class: Specification Controlled: A SUBCONTRACTORS BAPS 168-15 STRESS RELIEF OF METALS E MAINTENANCE ORGANIZATION BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 174-09 INSTALLATION OF WIGGINS TYPE COUPLINGS ON RIGID PLUMBING LINES BAPS 174-16 ASSEMBLY AND INSTALLATION OF SIERRACIN/HARRISON SLEEVES AND UNIONS ON PLUMBING LINES BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES BAPS 174-18 INSTALLATION OF DEUTSCHLITE DPL SERIES FITTINGS Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to manual installation BAPS 172-34 FUSION WELDING Limitation: Limited to weld class C and D for Metal group IV. AERO DYNAMIC MACHINING INC., 11791 MONARCH ST. 0000130852 Class: A SUBCONTRACTORS Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Page 27 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification GARDEN GROVE, CA US, 92841 TEL: 714 379 1073 FAX: 714 379 1073 Learjet Approved Suppliers Scope of Approval BAPS 175-006 INSTALLATION OF BUSHING USING FORCEMATE COLD EXPANSION PROCESS Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Electrochemical Etch Marking on Titanium 6V4 ONLY . BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: To shrink fit with dry ice or liquid nitrogen ONLY . AERO FABRICATIONS LTD., 0000108787 COMMON LANE WATNALL, NT GB, NG16 1HA TEL: 1 159 389515 FAX: 1 159 389507 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 180-001 ALKALINE CLEANING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS PPS 34.08 EPOXY PRIME PSPEC 401 HEAT TREATMENT OF ALUMINIUM AND ALUMINIUM ALLOYS PSPEC 501 MANUAL ARGON ARC WELDING PSPEC 801 MANUAL INSTALLATION AND REMOVAL OF SOLID RIVETS PSPEC 910 ETCH AND EPOXY PRIMING Page 28 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Ink Marking, bag and label and Chemi-Etch marking only BAPS 172-34 FUSION WELDING Limitation: Limited to Base Metal Group IIA per objective evidence provided. PPS 01.02 FORMING ALUMINUM ALLOYS PSPEC 222 FABRICATION OF NCKEL BASED SUPERALLOYS Limitation: Limitation: Cold forming only. AERO FASTENER CO. INC., 0000102001 76 SERVISTAR INDUSTRIAL WAY WESTFIELD, MA US, 01085 TEL: 413 562 5851-129 FAX: 413 568 2190 Class: D DISTRIBUTOR AERO FLUID PRODUCTS, 0000100915 313 GILLETT ST. PAINESVILLE, OH US, 44077-2918 TEL: 440-392-6676 FAX: 440 352 3738 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval A34R423J & EASA dual approval EASA.145.4050. AERO GLEN INTERNATIONAL, 0000127170 1160 MUSTANG DRIVE, SUITE 300 DFW INTERNATIONAL AIRPORT, TX US, 75261 TEL: 817-989-9545 FAX: 972-456-1015 Class: D DISTRIBUTOR AERO INC., 0000109094 2-54 KIBA, TOBISHIMA-MURA AMA-GUN, 23 JP, 4901444 TEL: 81 567 66 3501 FAX: 81 567 68 6016 Class: A SUBCONTRACTORS Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES PPS 02.70 INSTALLATION OF ADHESIVE BONDED FASTENERS PPS 21.20 MIXING AND HANDLING TWO PART SEALANTS PPS 21.21 GENERAL SEALING PRACTICES PPS 25.14 GENERAL ELECTRIC PSA529/SRC-18 SILICONE BASE ADHESIVE PPS 25.23 EC-1300 ADHESIVE PPS 25.30 BONDING USING DHMS A6.09 EPOXY ADHESIVE Page 29 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PPS 25.50 RTV SILICONE ADHESIVES PPS 25.55 EC-1357N ADHESIVE PPS 25.63 EC-1300-L ADHESIVE Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Limited to touch-up only on site and at MHI Tobishima premises. BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Limited to touch-up only on site and at MHI Tobishima premises. BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: On the promises of MHI Tobishima Plant. BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: On the promises of MHI Tobishima Plant AND Aero Space Systems plant (vendor 109094) BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: On the promises of MHI Tobishima plant. Manual installation only for both plant. BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING Limitation: On the premesis of MHI Tobishima plant. BAPS 157-27 INTEGRAL FUEL TANK SEALING Limitation: On the promises of MHI Tobishima Plant Limitation: On the promises of MHI Tobishima Plant Limitation: On the promises of MHI Tobishima Plant AND Aero Space Systems plant (vendor 109094) BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: On site and on the promises of MHI Tobishima Plant, limited to type II application only. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to type II application only. BAPS 174-08 ASSEMBLY AND INSTALLATION OF FLARELESS FITTINGS ON PLUMBING LINES Limitation: Installation only. BAPS 174-09 INSTALLATION OF WIGGINS TYPE COUPLINGS ON RIGID PLUMBING LINES Page 30 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval Limitation: Installation only. BAPS 174-16 ASSEMBLY AND INSTALLATION OF SIERRACIN/HARRISON SLEEVES AND UNIONS ON PLUMBING LINES Limitation: Installation only. BAPS 188-02 COLD WORKING OF HOLES Limitation: On the promises of MHI Tobishima Plant. PPS 34.08 EPOXY PRIME Limitation: Limited to touch-up only. AERO INDUSTRIES INC., 0000125403 5745 HUNTSMAN ROAD RICHMOND, VA US, 23250-2416 TEL: 800 845 1308 FAX: 804 226 1879 Class: E MAINTENANCE ORGANIZATION AERO INSTRUMENTS & AVIONICS INC., 0000102468 7290 NASH ROAD NORTH TONAWANDA, NY US, 14120-1508 TEL: 716 694 7060 FAX: 716 694 7594 Class: E MAINTENANCE ORGANIZATION AERO MAC INC., 0000108819 4602 CHENNAULT BEACH ROAD, D-1 MUKILTEO, WA US, 98275-5016 TEL: 425 348 4140 FAX: 425 745 5960 Class: A SUBCONTRACTORS Specification Controlled: BAPS 185-02 SHOT PEENING OF METAL PARTS AERO METAL FINISHING, 0000108673 2150 N. LARK INDUSTRIAL DR. FENTON, MO US, 63026 TEL: 636 677 1650 FAX: 636 677 1034 Class: A SUBCONTRACTORS Specification Controlled: LES 1004 PENETRANT INSPECTION LES 1006 INSPECTION, MAGNETIC PARTICLE LES 1045 ANODIZING, CHROMIC ACID LES 1047 CHEMICAL FILM TREATMENT, APPLICATION OF - ALUMINUM ALLOYS LES 1048 PLATING CADMIUM-STEEL & COPPER LES 1079 EPOXY FINISH, FUEL RESISTANT, APPLICATION OF AERO SHADE TECHNOLOGIES INC., 0000105284 3104-3106 INDUSTRIAL AVE. THREE FORT PIERCE, FL US, 34946 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER Page 31 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 772 562 2243 FAX: 772 461 8611 AERO SPACE CONTROLS CORP., 0000101499 1050 N. MOSLEY WICHITA, KS US, 67214-3041 TEL: 316 264 2875 FAX: 316 264 1639 Class: B EQUIPMENT SUPPLIERS AERO VODOCHODY AEROSPACE A.S., 0000127503 U LETISTE 374 ODOLENA VODA, 06 CZ, 250 70 TEL: 731 135 150 FAX: 255 763 225 Class: F STRUCTURAL SUPPLIER Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2E MECHANICAL TESTING: PLASTICS, RUBBERS STATIC AND ELASTIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-4C TESTING OF THERMAL PROPERTIES (EXPANSIONS, TMA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES Page 32 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval (Intrusive Methods Only) BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-27 INTEGRAL FUEL TANK SEALING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 168-15 STRESS RELIEF OF METALS BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS BAPS 172-34 FUSION WELDING BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 175-006 INSTALLATION OF BUSHING USING FORCEMATE COLD EXPANSION PROCESS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 176-17 RADIOGRAPHIC INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-11 CLEANING AND DEOXIDIZING COPPER AND COPPER ALLOYS BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 185-000 GRINDING OF STEEL PARTS BAPS 185-02 SHOT PEENING OF METAL PARTS BAPS 185-03 PEEN FORMING OF METAL PARTS BAPS 186 CHEMICAL MILLING OF ALUMINUM BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES CAPTIVE LABORATORY Page 33 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual Riveting Only. BAPS 168-15 STRESS RELIEF OF METALS Limitation: Aluminium Only Limitation: Aluminium Only Limitation: Precipitation only of 15.5 PH steel per AMS 5659 (H1025 condition) BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS Limitation: Limited to NDT called under MRB action on spars AERO-CRAFT HYDRAULICS INC., 0000108607 392 N. SMITH AVE. CORONA, CA US, 92880-6971 TEL: 951 736 4690 FAX: 951 736 4699 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval TF3R865L& EASA dual approval EASA.145.5959. AERO-HOSE CORP., 0000125866 1845 TOWN CENTRE BLVD., SUITE 140 ORANGE PARK, FL US, 32003 TEL: 904 215 9638 FAX: 904 215 9671 Class: C MANUFACTURER D DISTRIBUTOR AERO-MACH LABS. INC., 0000101197 7707 E. FUNSTON WICHITA, KS US, 67207-3121 TEL: 316 219 2204 FAX: 316 682 3418 Class: E MAINTENANCE ORGANIZATION AERO-NASCH AVIATION, 0000101652 6849 HAYVENHURST AVE. VAN NUYS, CA US, 91406-4718 TEL: 818 786 5480 FAX: 8189949456 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods AEROANTENNA TECHNOLOGY INC., 20732 LASSEN ST. CHATSWORTH, CA US, 91311-4507 Class: B EQUIPMENT SUPPLIERS 0000123940 Page 34 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 818 993 3842 FAX: 818 993 4525 AEROCOM INSPECTION SERVICE LTD., 0000107694 2222 SHERIDAN WAY S. MISSISSAUGA, ON CA, L5J 2M4 TEL: 905 823 4933 FAX: 905 823 4938 Class: A SUBCONTRACTORS AEROCONTROLEX, 0000100057 4223 MONTICELLO BLVD. SOUTH EUCLID, OH US, 44121 TEL: 216-291-6124 FAX: 216 291 6045 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS C MANUFACTURER Limitation: FAA Repair Station approval # A34D423J E MAINTENANCE ORGANIZATION AEROFIN LABORATORIES LTD., 0000125035 THE GLEBE, PARSONAGE ROAD, BERROW BURNHAM-ON-SEA, SO GB, TA8 2NJ TEL: 1278 786292 FAX: 0000 000000 Class: A SUBCONTRACTORS AEROFIT INC., 0000103292 1425 S. ACACIA AVE. FULLERTON, CA US, 92831-5317 TEL: 714-521-5060 FAX: 714-520-0656 Class: C MANUFACTURER AEROFLEX WICHITA INC., 10200 YORK ST. W. WICHITA, KS US, 67215-8999 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS 0000103897 Specification Controlled: BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 176-17 RADIOGRAPHIC INSPECTION PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS INDEPENDANT LABORATORY Page 35 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 316 522 4981 FAX: 316 529 5330 AEROFLEX/INMET, INC., 0000122290 300 DINO DR. ANN ARBOR, MI US, 48103-9502 TEL: 734 426 5553 FAX: 734 426 5557 Class: C MANUFACTURER AEROFLITE ENTERPRISES INC., 0000106670 261 GEMINI AVE. BREA, CA US, 92821-3704 TEL: 714 773 4251 FAX: 714 773 4973 Class: D DISTRIBUTOR AEROL CO., 0000106671 19560 RANCHO WAY S. O. RANCHO DOMINGUEZ, CA US, 90220-6038 TEL: 310 762 2660 FAX: 310 762 2005 Class: C MANUFACTURER AEROLIA CANADA, 0000134026 12 000 HENRY GIFFARD MIRABEL, QC CA, J7N 1H4 TEL: 514 403 8100 FAX: 514 333 6809 Class: F STRUCTURAL SUPPLIER Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 145-150 INSTALLATION AND TERMINATION OF SHIELDS FOR EMI, HIRF & LIGHTNING PROTECTION OF WIRE HARNESSES BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES BAPS 174-18 INSTALLATION OF DEUTSCHLITE DPL SERIES FITTINGS Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Touch-up only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Touch-up only BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: No lock washer or cotter pin. Positionning of turnbuckles permitted, not final installation. BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual installation only BAPS 151-047 INSTALLATION OF TITANIUM LOCKBOLT IN METALS Limitation: Pull Type only Page 36 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 157-27 INTEGRAL FUEL TANK SEALING Limitation: Use of pre-moulded seal caps in case of fastener sealing BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Touch-up with prep-pen only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Touch-up with prep-pen BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Liquid nitrogen method only AEROLIA SAS, 0000129241 ROUTE DE BRAY MEAULTE, 80 FR, 80302 TEL: 0 6 22 64 30 00 FAX: 0 6 27 44 51 8 Class: F STRUCTURAL SUPPLIER Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-27 INTEGRAL FUEL TANK SEALING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 185-01 BARREL AND VIBRATORY FINISHING Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Touch-up only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Touch-up only BAPS 151-047 INSTALLATION OF TITANIUM LOCKBOLT IN METALS Limitation: Pull type lockbolt only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type II with prep-pen only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type II with prep-pen only BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limitation to Nitrogen only, no heating or other mean of cooling BAPS 176-019 EDDY CURRENT INSPECTION Limitation: Occasional spot checks after repairs for the detection of: Surface cracks (minimum 0.2mm deep) and Bolthole cracks (minimum 0,2mm deep and minimum 2 mm BAPS 188-02 COLD WORKING OF HOLES Page 37 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval AEROLUX LTD., 0000102219 91 CHORLEY ROAD BLACKPOOL, LA GB, FY3 7XQ TEL: 1253 396670 FAX: 44 1253 300074 Class: C MANUFACTURER E MAINTENANCE ORGANIZATION AEROMET INTERNATIONAL LTD., 0000117695 COSGROVE CLOSE , BLAKPOLE WORCESTER, WC GB, WR3 8UA TEL: 01905 758 531... FAX: 01795 415036 Class: C MANUFACTURER AERONIX INC., 0000135444 1775 W. HIBISCUS BLVD. MELBOURNE, FL US, 32901 TEL: 321-984-1671-254 FAX: 321-984-0366 Class: B EQUIPMENT SUPPLIERS AEROPARTS MFG. & REPAIR INC., 0000104381 431 RIO RANCHO BLVD. RIO RANCHO, NM US, 87124-1421 TEL: 505 891 6600 FAX: 505 891 6651 Class: A SUBCONTRACTORS E MAINTENANCE ORGANIZATION AEROREPAIR CANADA INC., 0000136892 11855 SERVICE ROAD A-3 MIRABEL, QC CA, J7N 1E6 TEL: 450-476-0132 FAX: 450-476-0151 Class: E MAINTENANCE ORGANIZATION AEROSONIC CORP., 0000100143 1212 N. HERCULES AVE. CLEARWATER, FL US, 33758 TEL: (727)461-3000... FAX: 727 447 5926 Class: B EQUIPMENT SUPPLIERS AEROSOURCE INC., 390 CAMPUS DR. SOMERSET, NJ US, 08873-1102 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval FK1R142K & EASA dual approval EASA.145.4042. 0000105649 Page 38 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 732 469-9300-115 FAX: 732 469 8010 AEROSPACE ALUMINUM PRODUCTS, 0000108754 FM 71 E CR 3567 SULPHUR BLUFF, TX US, 75481 TEL: 903 945 3668 FAX: 903 945 5599 Class: C MANUFACTURER AEROSPACE COMPOSITE, 0000109878 LONDON LUTON AIRPORT LUTON, BE GB, LU2 9NQ TEL: 01582-731441 FAX: 01582-731441 Class: B EQUIPMENT SUPPLIERS AEROSPACE DISPLAY SYSTEMS INC., 0000120783 9 IRON BRIDGE DR. COLLEGEVILLE, PA US, 19426-2042 TEL: 484-902-1107 FAX: 484 902 1150 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Limitation: FAA repair station approval L3XR680N and EASA 145.4060 AEROSPACE INDUSTRIAL DEVELOPMENT CO, 0000135834 NO. 366, SEC. 6, ZHONGQING RD. TAICHUNG CITY, SHA LU DISTRICT, TWN TW, 433 TEL: 86 28 8795 8528 FAX: 999 999 9999 Class: F STRUCTURAL SUPPLIER Specification Controlled: BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 138-45 APPLICATION OF CMS 565-12 CONDUCTIVE COATING TO PLASTIC SURFACES BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES BAPS 188-08 MACHINING OF COMPOSITES Page 39 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 260-03 POTTING OF HONEYCOMB SANDWICH PANELS CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: to Ovens ID #32013999-01 and #320113999-02 BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: to Manual Riveting BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: to Type II Manual Application BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: to Type II Manual Application BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS Limitation: to the following autoclaves and part numbers Limitation: Autoclave OLMAR-1540-C (S/N X32013992) Limitation: Autoclave OLMAR-1230-A (S/N X32013993) Limitation: Autoclave OLMAR-1230-B (S/N X32013994) Limitation: List of Part Numbers found in CM BD100-BA/MPE-AIDC/MPE-MP00522 BAPS 260-010 MACHINING, FORMING AND PREPARATION OF NON-METALLIC HONEYCOMB CORE FOR LAY-UP IN SANDWICH COMPONENTS Limitation: to autoclave cured Class B and Class C Cores BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... Limitation: to the following autoclaves and part numbers Limitation: Autoclave OLMAR-1540-C (S/N X32013992) Limitation: Autoclave OLMAR-1230-A (S/N X32013993) Limitation: Autoclave OLMAR-1230-B (S/N X32013994) Limitation: List of Part Numbers found in CM BD100-BA/MPE-AIDC/MPE-MP00522 BAPS 260-04 FABRICATION OF 355 DEGREE F CURE GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS Limitation: to the following autoclaves; Limitation: Autoclave OLMAR-1540-C (S/N X32013992) Limitation: Autoclave OLMAR-1230-A (S/N X32013993) Limitation: Autoclave OLMAR-1230-B (S/N X32013994) Page 40 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification AEROSPACE INDUSTRIAL DEVELOPMENT CO, 0000135425 NO. 366, SEE. 6, ZHONGQING RD., SHALU DI TAICHUNG CITY, TPE TW, 433 TEL: 866 4 27020001 FAX: 999 999 9999 Class: F STRUCTURAL SUPPLIER Learjet Approved Suppliers Scope of Approval Specification Controlled: BAPS 136-120 POLISHING OF ALUMINUM ALLOY SKIN BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES PSPEC 801 MANUAL INSTALLATION AND REMOVAL OF SOLID RIVETS PSPEC 910 ETCH AND EPOXY PRIMING Specification Controlled with Limitations: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Method 1 only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual riveting only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type II only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type II only PSPEC 419 CHEMICAL CONVERSION COATING OF ALUMINIUM AND ALUMINIUM ALLOYS Limitation: Brush only AEROSPACE INDUSTRIAL DEVELOPMENT CO, NO. 1, HANXIANG ROAD, XITUN DIST. TAICHUNG, TWN TW, 407 TEL: 4 27070001-4503 FAX: 4262 44052 0000101764 Class: F STRUCTURAL SUPPLIER Systems with Limitations: 2101 MRB APPROVAL - MINOR ONLY Limitation: CL300/350 Program Limitation: CL300/350 Program Limitation: Tailcone and empennage of the Learjet 45/70/75 Program Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL Page 41 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2E MECHANICAL TESTING: PLASTICS, RUBBERS STATIC AND ELASTIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5C FAA HEAT RELEASE/SMOKE TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 132-03 SWAGING OF TUBES BAPS 136-120 POLISHING OF ALUMINUM ALLOY SKIN BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 138-45 APPLICATION OF CMS 565-12 CONDUCTIVE COATING TO PLASTIC SURFACES BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING BAPS 145-004 INSTALLATION OF MECHANICALLY ATTACHED TERMINALS Page 42 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 145-006 TERMINATION OF THE SHIELD ON SHIELD ON SHIELDED WIRE AND CABLE BAPS 145-008 STOWAGE OF ELECTRICAL WIRING AND CONNECTORS BAPS 155-074 STRUCTURAL ADHESIVE BONDED ASSEMBLIES FOR USE UP TO 180 DEGREE F (250 DEGREE F CURE) BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 160-09 CHROMIUM PLATING OF STEELS HEAT TREATED TO LESS THAN 220,000 PSI AND COPPER ALLOYS BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 161-007 APPLICATION OF MIL-L-46010 SOLID FILM LUBRICANT BAPS 161-008 APPLICATION OF MIL-81329 SOLID FILM LUBRICANT BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT BAPS 168-15 STRESS RELIEF OF METALS BAPS 172-12 TINNING AND SOLDERING BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 174-08 ASSEMBLY AND INSTALLATION OF FLARELESS FITTINGS ON PLUMBING LINES BAPS 174-09 INSTALLATION OF WIGGINS TYPE COUPLINGS ON RIGID PLUMBING LINES BAPS 174-16 ASSEMBLY AND INSTALLATION OF SIERRACIN/HARRISON SLEEVES AND UNIONS ON PLUMBING LINES BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES BAPS 174-18 INSTALLATION OF DEUTSCHLITE DPL SERIES FITTINGS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 180-001 ALKALINE CLEANING Page 43 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 180-040 AQUEOUS DEGREASING BAPS 180-11 CLEANING AND DEOXIDIZING COPPER AND COPPER ALLOYS BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 186 CHEMICAL MILLING OF ALUMINUM BAPS 188-02 COLD WORKING OF HOLES BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... BAPS 260-03 POTTING OF HONEYCOMB SANDWICH PANELS CAPTIVE LABORATORY MPS 145-25 CERTIFICATION OF CRIMPING TOOL OPERATORS MPS 160-08 CADMIUM PLATING OF CARBON AND LOW ALLOY STEELS BELOW 220,000PSI, COPPER ALLOYS AND CRES STEELS MPS 176-07 ULTRASONIC INSPECTION OF WROUGHT METALS PSPEC 205 THE BENDING AND FLARING OF PIPES AND DUCTS PSPEC 213 FORMING OF ALUMINUM ALLOYS PSPEC 231 FABRICATION OF TITANIUM AND TITANIUM ALLOYS PSPEC 236 FABRICATION OF STEELS PSPEC 300 PENETRANT FLAW DETECTION PSPEC 301 MAGNETIC PARTICLE INSPECTION PSPEC 305 RADIOGRAPHIC EXAMINATION PSPEC 400 HEAT TREATMENT OF CARBON AND LOW ALLOY STEELS PSPEC 401 HEAT TREATMENT OF ALUMINIUM AND ALUMINIUM ALLOYS PSPEC 403 CADMIUM PLATING OF CARBON, LOW ALLOY AND STAINLESS STEELS PSPEC 410 CHROMIC ACID ANODISING PSPEC 416 PASSIVATION OF AUSTENITC, MARTENSITIC AND PH STEELS PSPEC 419 CHEMICAL CONVERSION COATING OF ALUMINIUM AND ALUMINIUM ALLOYS PSPEC 420 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS PSPEC 430 HARD ANODISING PSPEC 434 HEAT TREATMENT OF PRECIPITATION HARDENING (PH) STEELS Page 44 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PSPEC 440 HEAT TREATMENT OF CORROSION RESISTANT STEELS PSPEC 501 MANUAL ARGON ARC WELDING PSPEC 507 MANUAL ARGON ARC WELDING OF TITANIUM AND TITANIUM ALLOYS PSPEC 620 ADHESIVE FILM BONDING OF ALUMINUM ALLOYS PSPEC 622 GLASS FABRIC/EPOXY STRUCTURAL COMPONENTS 121C AUTOCLAVE CURE PSPEC 633 THE APPLICATION OF TWO PART EPOXY RESIN PSPEC 636 FILLING OF GAPS BETWEEN FAYING SURFACES PSPEC 637 INSTALLATION OF BEARINGS USING ANAEROBIC ADHESIVES PSPEC 703 PEENING OF METALLIC COMPONENTS PSPEC 706 CHEMICAL MILLING OF ALUMINIUM ALLOYS PSPEC 801 MANUAL INSTALLATION AND REMOVAL OF SOLID RIVETS PSPEC 905 INSTALLATION & SEALING OF INTERFERENCE FIT BUSHES PSPEC 907 INSTALLATION & RETENTION OF BEARINGS BY GROOVE STAKING PSPEC 910 ETCH AND EPOXY PRIMING PSPEC 924 INSTALLATION & RETENTION OF BEARINGS BY THE LINE STAKE SLEEVE METHOD PSPEC 925 STAKING OF BEARINGS - HOUSING METHOD Specification Controlled with Limitations: BAPS 138-45 APPLICATION OF CMS 565-12 CONDUCTIVE COATING TO PLASTIC SURFACES Limitation: TO APPLY BAMS 565-012 TPE II ONLY BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: APPROVAL LIMITED TO METHOD 1 BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: to Manual Riveting only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to type 2 manual application -Taiwan Advanced Composite Center (TACC) BAPS 160-23 HARD ANODIZING OF ALUMINUM ALLOYS Limitation: APPROVED FOR TYPE 1 CLASS A BAPS 160-31 LOCALIZED BRUSHING PLATING Limitation: CADMIUM PLATING ONLY BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to type 2 manual application -Taiwan Page 45 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Advanced Composite Center (TACC) BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: FURNACES X1-0825, X1-0830, LIMITED TO THE SOLUTION HEAT TREAT & ANNEAL OF Limitation: CLAD SHEETS OF > 0.016 ONLY . FURNACES X1-2215 , X1-4062, X1-2325,X1-3442, Limitation: X1-060 Limitation: LIMITED TO WATER QUENCHING AFTER SOLUTION HEAT TREATMENT ONLY Limitation: FURNACE Limitation: X1-2790 LIMITED TOTHE SOLUTION HEAT TREAT & ANNEAL OF CLAD SHEETS OF > Limitation: 0.016 AND LIMITED TO HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: Limitation: FURNACE 32008931 ,32008932 Limitation: LIMITED TO HEAT TREATMENT OF ALUMINUM ALLOYS Limitation: Limitation: furnaces No 32008931 Limitation: S/N 32014978 Limitation: Class 10, Type A Limitation: Solution Heat Treat Limitation: Temperature: 600F to 1056F Limitation: Aluminum Alloy Thickness: .020” to .250” BAPS 168-14 HEAT TREATMENT OF STEELS Limitation: LIMITED TO FURNACE NO. X1-3777, X1-1871 & X1-2211 BAPS 168-20 HEAT TREATMENT OF COPPER AND COPPER ALLOYS Limitation: LIMITED TO FURNACE X0011871 BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS Limitation: LIMITED TO AGING BELOW 1350 F, LIMITED FURNACES X1-3777, X1-1871, X1-2211 (SOLUTION H/T & ANNEALING). X1-2215 & X1-4062 FOR AGING) BAPS 172-010 SEAM WELDING Limitation: Limitations: Limitation: -Machine no. 9900643 Alphatron/Sciaky Model No 10889 Limitation: -Group 2-3 Class B Limitation: -Sheet thickness 0.020 to 0.040 inch BAPS 172-11 SPOT WELDING Page 46 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Limitation: Limited to: - Machine no. 32011536 Alphatron/Sciaky No. 9675, Group 2-3 Class B, Sheet Limitation: thickness 0.012 to 0.125 inch. BAPS 172-34 FUSION WELDING Limitation: WELDER #602097 FOR GROUP IIA Limitation: FOR GROUP LV LIMITED TO THK. FROM .021- .128 Limitation: FOR BUTT WELDS; THK. FROM .027-.160 Limitation: FOR FILLET WELDS; MIN. TUBE DIA. 1" Limitation: FOR GROVE WELDS; POSITIONS 1G, 1F & 2F ONLY. Limitation: WELDER 610523 FOR GROUP 2A LIMITED BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Limitation: Limited to lines PT-01 and PT-02 BAPS 176-14 NITAL ETCH INSPECTION OF STEEL PARTS Limitation: PARTS SHOULD BE HARDNESS TESTED WHEN UNIFORM IN COLOR BAPS 176-17 RADIOGRAPHIC INSPECTION Limitation: TECHNIQUE SHEETS REQUIRED BAPS 185-02 SHOT PEENING OF METAL PARTS Limitation: Technique Sheets approval required for each part number/equipement combinaison AEROSPACE INDUSTRIES SUPPLY LTD., 0000110323 STEPHENSTOWN INDUSTRIAL ESTATE BALBRIGGAN, DB IE, 0 TEL: 1-8834820 FAX: 4353 1843 9310 Class: D DISTRIBUTOR AEROSPACE MANUFACTURING C INC., 0000133305 80 VAN WINKLE AVE WALLINGTON, NJ US, 07057 TEL: 973 472 2300 FAX: 973 472 4120 Class: C MANUFACTURER AEROSPACE METAL FINISHERS LTD., 0000116723 11 PARADISE AVE., UNIT 3 BALLYMENA, AT GB, BT42 3AE TEL: 028 2563 1066 FAX: 028 2563 1347 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 138-49 APPLICATION OF BAMS 565-013 HEAT RESISTANT COATING BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL Page 47 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TANK COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-23 HARD ANODIZING OF ALUMINUM ALLOYS BAPS 160-32 SULFURIC ACID ANODIZING BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 161-007 APPLICATION OF MIL-L-46010 SOLID FILM LUBRICANT BAPS 161-008 APPLICATION OF MIL-81329 SOLID FILM LUBRICANT BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-040 AQUEOUS DEGREASING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.09 CLEANING OF TITANIUM PPS 32.01 CROMATE CONVERSION COATING PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 32.04 HARD ANODIZING (A2) PPS 32.09 APPLICATION OF DRY FILM LUBRICANTS (C3, C7 AND C8) PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PSPEC 300 PENETRANT FLAW DETECTION PSPEC 301 MAGNETIC PARTICLE INSPECTION PSPEC 410 CHROMIC ACID ANODISING PSPEC 411 SULPHURIC ACID ANODISING PSPEC 416 PASSIVATION OF AUSTENITC, MARTENSITIC AND PH STEELS PSPEC 419 CHEMICAL CONVERSION COATING OF ALUMINIUM AND ALUMINIUM ALLOYS Page 48 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PSPEC 430 HARD ANODISING PSPEC 910 ETCH AND EPOXY PRIMING Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Limited to Spraybake Booths SB1, SB2 & SB3. BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS Limitation: Alternate process as per Section 9.8 of the spec AEROSPACE METAL FINISHING INC., 0000107695 71 PROCTOR ROAD SCHOMBERG, ON CA, L0G 1T0 TEL: 416 324 3241 FAX: 905 939 2723 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4E TESTING OF WEAR AND ABRASION PROPERTIES BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 138-49 APPLICATION OF BAMS 565-013 HEAT RESISTANT COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-23 HARD ANODIZING OF ALUMINUM ALLOYS BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS MPS 160-08 CADMIUM PLATING OF CARBON AND LOW ALLOY STEELS BELOW 220,000PSI, COPPER ALLOYS AND CRES STEELS PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.05 SURFACE TREATMENTS OF CORROSION RESISTANT STEELS PPS 32.01 CROMATE CONVERSION COATING PPS 32.03 CHROMIC ACID ANODIZING (A1) Page 49 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PPS PPS PPS PPS PPS PPS 32.04 32.05 33.01 33.03 33.06 34.08 HARD ANODIZING (A2) SULPHURIC ACID ANODISING CADMIUM PLATING (E1) ELECTRO DEPOSITED NICKEL ELECTROLESS NICKEL PLATING (E4) EPOXY PRIME Specification Controlled with Limitations: BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation: Type I and Type II_ Alodine 1000 BAPS 168-15 STRESS RELIEF OF METALS Limitation: limited to Ferrous Alloys only and the maximum of temperature must be under 1200 degree Limitation: Fahrenheit. PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS Limitation: Limited to embrittlement and stress relief only PPS 30.06 PRECIPITATION HARDENABLE (PH) STAINLESS STEEL Limitation: Limited to embrittlement and stress relief only PPS 30.08 STEEL HEAT TREATMENT - MARTENSITIC STAINLESS STEEL Limitation: Limited to embrittlement and stress relief only PPS 33.02 STRIPPING PF PLATING Limitation: Stripping of cadmium plating AEROSPACE METALLIC SUPPLY LTD., 0000126694 UNIT 4, STERLING WAY, NORCOT ROAD READING, BK GB, RG30 6HW TEL: 0118 9728320 FAX: 0118 9410133 Class: D DISTRIBUTOR AEROSPACE PRODUCTS CO., 0000106677 123 PINE ST. N. INDIANAPOLIS, IN US, 46202-3844 TEL: 317 269 1510 FAX: 317 269 1522 Class: C MANUFACTURER AEROSPACE PRODUCTS INTERNATIONAL IN, 8655 COMMERCE DRIVE, STE 105 SOUTHAVEN, MS US, 38671 0000101489 Class: D DISTRIBUTOR Page 50 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 901 375 2670 FAX: 901 259 6158 AEROSPACE SURFACE TREATMENTS LTD., 0000109880 CHELMSFORD INDUSTRIAL PARK CHELMSFORD, ES GB, CM1 3TH TEL: 01 245 350444 FAX: 01 245 492901 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Conductive conversion coating (Alodine 1132 pen) as per section 10.1.3 & 10.4 of the specification. BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Unfication Document UD007 Limitation: Unfication Document UD007 Limitation: TYPE 2 ONLY BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to Type 2 Manual Application Only Page 51 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval AEROSPACE SYSTEMS & COMPONENTS, 0000100967 5201 E. 36TH ST. N. WICHITA, KS US, 67220-3206 TEL: 316 686 7392 FAX: 316 686 8542 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION AEROSPACE TECHNOLOGIES GROUP INC, 0000110943 620 NW 35th ST. BOCA RATON, FL US, 33431-6413 TEL: 561 244 7450 FAX: 561 735 3384 Class: B EQUIPMENT SUPPLIERS AEROSPACE TECHNOLOGIES INC., 0000130571 40 ROCKBRIDGE ROAD, SW BUILDING 100 LILBURN, GA US, 30047 TEL: 770 564 0500 FAX: 999 999 9999 Class: E MAINTENANCE ORGANIZATION AEROSPACE TURBINE ROTABLES INC., 0000101366 1919 E. Northern WICHITA, KS US, 67216 TEL: 316 943 6100 FAX: 316 943 2917 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval NV2R045L & EASA dual approval EASA.145.4033. AEROSPACE WELDING INC., 0000106211 890 MICHELE BOHEC BLAINVILLE, QC CA, J7C 5E2 TEL: 450 435 9210-264 FAX: 450 435 7851 Class: Specification Controlled: A SUBCONTRACTORS BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND E MAINTENANCE ORGANIZATION WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3E WELDING EVALUATION BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Page 52 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 172-009 SILVER TORCH BRAZING BAPS 172-010 SEAM WELDING BAPS 172-34 FUSION WELDING BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-11 CLEANING AND DEOXIDIZING COPPER AND COPPER ALLOYS BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY PPS 20.03 PENETRANT FLAW DETECTION PPS 24.04 THERMAL SPRAY DEPOSITION COATINGS PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.09 CLEANING OF TITANIUM PPS 32.01 CROMATE CONVERSION COATING PPS 32.02 MANUAL APPLICATION OF CHEMICAL CONVERSION COATINGS PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PPS 37.03 FUSION WELDING OF ALUMINUM AND ALUMINUM ALLOYS PPS 37.04 FUSION WELDING OF FERROUS AND NICKEL ALLOYS PPS 37.05 FUSION WELDING OF TITANIUM PPS 37.06 TESTING AND APPROVAL OF AIRCRAFT WELDERS PPS 37.10 REQUIREMENTS FOR FUSION WELDS Specification Controlled with Limitations: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: limited to Safety tying with Lock wire, Lock Washers and Cotter Pins. BAPS 172-11 SPOT WELDING Limitation: Limited to Machine # 2435-1 Weld Class B, Material Group 2, Gauge combinations within Limitation: 0.032 and 0.120 inches AEROSPATIALE THYSSENKRUPP, AV. DE MARQUES NO. 36-A QUERETARO, QRO 0000128405 Class: D DISTRIBUTOR Page 53 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval MX, 76246 TEL: 442 192 4089 FAX: 442 192 4015 AEROSPHERE INC., 0000121012 21 CHEMIN DE L'AVIATION, SUITE 100 POINTE-CLAIRE, QC CA, H9R 4Z2 TEL: 514 429 4040 FAX: 514 429 3131 Class: A SUBCONTRACTORS AEROSPHERES (UK) LIMITED, 0000130982 AEROSPACE HOUSE, 2A TUDOR HARROW, MX GB, HA3 5PE TEL: 514 855 5000 FAX: 514 855 5000 Class: D DISTRIBUTOR AEROSTAR, S.A., 0000133543 STR.CONDORILOR. NR.9 BACAU, 04 RO, 0600302 TEL: +40234 575070 FAX: 514 855 5000 Class: A SUBCONTRACTORS Specification Controlled: BAPS 185-02 SHOT PEENING OF METAL PARTS BAPS 185-03 PEEN FORMING OF METAL PARTS PPS 17.03 SHOT PEENING PPS 17.04 SHOT PEEN FORMING - Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4E TESTING OF WEAR AND ABRASION PROPERTIES BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5F FUELS, LUBRICANTS, SOLVENTS (FORMERLY IE) BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-32 SULFURIC ACID ANODIZING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING Page 54 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 172-34 FUSION WELDING Limitation: Limited to material group IV only AEROSUBS LTD., 0000109884 WAKEHURST ROAD, UNIT D8 BALLYMENA, AT GB, BT42 3AZ TEL: 02825 648988 FAX: 02825 649929 Class: A SUBCONTRACTORS AEROSYSTEMS INTERNATIONAL INC., 0000106479 3538 ASHBY ST-LAURENT, QC CA, H4R 2C1 TEL: 514 336 9426-227 FAX: 514 336 4383 Class: A SUBCONTRACTORS AEROTECH FASTENERS, 0000106685 ONE RIDGE ROAD PUTNAM, CT US, 06260-3034 TEL: 860 928 6300 FAX: 860 928 6340 Class: C MANUFACTURER AEROTECH LABORATORIES LTD., 0000127666 UNIT 20, MERCIA BUSINESS VILLAGE COVENTRY, WM GB, CV4 8HX TEL: 02476 474474 FAX: 02476 474473 Class: A SUBCONTRACTORS Specification Controlled with Limitations: BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Limitation: G.Winnery - Bearings MS14101-3 & MS14103-4 Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5C FAA HEAT RELEASE/SMOKE TESTING BAERD-GEN-018-5D LIGHTNING STRIKE EVALUATION BAERD-GEN-018-5E EVALUATION OF PAINTS BAERD-GEN-018-5F FUELS, LUBRICANTS, SOLVENTS (FORMERLY IE) Page 55 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAERD-GEN-018-5G PLASTICS, RUBBERS (FORMERLY 1D) BAERD-GEN-018-5H TEXTILES AND FIBROUS MATERIALS (FORMERLY 1F) BAERD-GEN-018-5I WILD LAND FIRE CHEMICAL RETARDANT MATERIALS AND FOAMS INDEPENDANT LABORATORY AEROTEK MFG. LTD., 0000106830 1449 HOPKINS ST. WHITBY, ON CA, L1N 2C2 TEL: 905 666 3400-305 FAX: 905 666 3413 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-06 PHOSPHATE TREATMENT BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-23 HARD ANODIZING OF ALUMINUM ALLOYS BAPS 160-32 SULFURIC ACID ANODIZING BAPS 160-42 ION VAPOR DEPOSITED ALUMINUM COATINGS ON ALUMINUM ALLOY SUBSTRATES BAPS 160-43 ION VAPOR DEPOSITION OF ALUMINUM ON STEELS CORROSION RESISTANT STELLS AND TITANIUM ALLOYS BAPS 161-007 APPLICATION OF MIL-L-46010 SOLID FILM LUBRICANT BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Page 56 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval CAPTIVE LABORATORY MPS 160-08 CADMIUM PLATING OF CARBON AND LOW ALLOY STEELS BELOW 220,000PSI, COPPER ALLOYS AND CRES STEELS PPS 24.02 ION VAPOUR DEPOSITION PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.03 PRE CLEANING OF STEELS PPS 31.05 SURFACE TREATMENTS OF CORROSION RESISTANT STEELS PPS 32.01 CROMATE CONVERSION COATING PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 32.04 HARD ANODIZING (A2) PPS 32.05 SULPHURIC ACID ANODISING PPS 32.06 APPLICATION OF MANGANESE PHOSPHATE (C2) TO STEEL PARTS PPS 33.01 CADMIUM PLATING (E1) PPS 33.02 STRIPPING PF PLATING PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PPS 34.16 APPLICATION OF EPOXY-AMINE, URETHANE COMPATIBLE, INTERMEDIATE PRIMER (F23) Specification Controlled with Limitations: PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS Limitation: EMBRITTLEMENT RELIEF ONLY. PPS 31.12 CLEANING NICKEL AND NICKEL ALLOYS Limitation: Limited to: Cleaning flowcharts_ solvent cleaning, aqueous cleaning and/or agreed Limitation: mechanical cleaning (Aluminum Oxide Blast) PPS 32.09 APPLICATION OF DRY FILM LUBRICANTS (C3, C7 AND C8) Limitation: Dry film lubricants limited only to Class C7 AEROTRON AIRPOWER INC., 0000132622 456 AEROTRON PKWY. LAGRANGE, GA US, 30240 TEL: 706 812 1700 FAX: 706 812 9666 Class: E MAINTENANCE ORGANIZATION AF FASTENERS LIMITED, 0000133875 UNIT 14-15, GLOSSOP BROOK BUSINESS PARK, GLOSSOP, DB GB, SK13 7AJ Class: C MANUFACTURER Page 57 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 01457 891507 FAX: 01457 891519 AF TECHNOLOGIES INC., 0000106688 2910 AVE. F ARLINGTON, TX US, 76011-5214 TEL: 817 649 2500 FAX: 817 649 3500 AFFINITY ELECTRONICS OF CANADA INC., 210 SAUNDERS ROAD BARRIE, ON CA, L4N 9A2 TEL: 705 792 5313 FAX: 866 897 5774 Class: C MANUFACTURER D DISTRIBUTOR 0000130053 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to ''Learjet Program'' ONLY Limitation: Limited to ''Learjet Program'' ONLY Limitation: Limited also to The MS25083 Part ONLY used for all Bombardier programs. Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Ipad cover only AFSR AICHACH GMBH, 0000108703 ROBERT-BOSCH-STR 4 AICHACH, 09 DE, 86551 TEL: 8251 87570 FAX: 8251 1652 Class: D DISTRIBUTOR AGILYNX INC., 0000127237 4 RODEO CIR. BILLERICA, MA US, 01821 TEL: 603 952 4978 FAX: 866 312 2470 Class: B EQUIPMENT SUPPLIERS AHLERS AEROSPACE INC., 0000108600 3621 RAIDER DR. HURST, TX US, 76053-7907 TEL: 817 553 2155 FAX: 817 553 2161 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: limitations to the following part numbers 900-40001, 353-10001, 427-10001, 472-10002, Limitation: 807-100001, 807-10003 Limitation: Limitation: FAA Repair Station approval D1WR074O & EASA dual approval EASA.145.5452. AIDC, 0000109008 111-20, LANE 68, FU-HSING N. ROAD TAICHUNG, TWN Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to the completion center (BICCM) only Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM-001 # 908 Page 58 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TW, 407 TEL: 4228 46587 FAX: 4228 46589 AIM AIRCRAFT SPARES, LLC, 0000110536 449 HWY. 74 S. PEACHTREE, GA US, 30269-2001 TEL: 770 631 2957 FAX: 770 631 3651 Class: D DISTRIBUTOR AIM AVIATION (JECCO LTD.), 0000106689 BOSCOMBE GROVE ROAD BOURNEMOUTH, DO GB, BH1 4PD TEL: 011 44 12 023... FAX: 011 44 12 023 Class: B EQUIPMENT SUPPLIERS AIM COMPOSITES LTD., 0000109885 PEMBROKE AVE. WATERBEACH, CA GB, CB2 9QR TEL: 01223 204849 FAX: 01223 862336 Class: C MANUFACTURER AIR BALTIC CORPORATION AS, 0000136611 RIGA INTERNATIONAL AIRPORT RIGA, LV LV, LV-1053 TEL: 37167207838 FAX: 37167207848 Class: J LOGISTIC PROVIDER AIR CAPITOL DIAL INC., 0000100895 220 N. VINE WICHITA, KS US, 67203-5841 TEL: 877-269-2483 FAX: 316 264 9269 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval C64R675N & EASA dual approval EASA.145.5356. AIR CARGO CARRIERS LLC, 0000136381 4940 S HOWELL AVENUE MILWAUKEE, WI US, 53207 TEL: 001 414 482 1711 FAX: 001 414 486 5 Class: D DISTRIBUTOR AIR CRUISERS CO. LLC., 1747 STATE ROUTE 34 Class: B EQUIPMENT SUPPLIERS 0000101275 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: AIM Aviation products Page 59 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval WALL TOWNSHIP, NJ US, 07727-3937 TEL: 732-280-7491 FAX: 732 280 7492 AIR DALLAS INSTRUMENTS INC., 0000105855 811 OFFICE PARK CIR. LEWISVILLE, TX US, 75057-3157 TEL: 972-221-7414 FAX: 972-436-8114 Class: E MAINTENANCE ORGANIZATION AIR DATA INC., 0000106690 5930 COTE-DE-LIESSE MONT-ROYAL, QC CA, H4T 1C9 TEL: 514 344 1674-105 FAX: 514 344 1675 Class: B EQUIPMENT SUPPLIERS AIR DRY CORP. OF AMERICA, 0000102724 1740 COMMERCE WAY PASO ROBLES, CA US, 93446-3620 TEL: 805 238 2840 FAX: 805 238 0241 Class: C MANUFACTURER AIR ELECTRO INC., 0000106692 9452 DE SOTO AVE. CHATSWORTH, CA US, 91311-4910 TEL: 818 407 5400 FAX: 818 407 5460 Class: D DISTRIBUTOR AIR FLEX INDUSTRIES, 0000125170 2538 SUPPLY ST. POMONA, CA US, 91767-2113 TEL: 909-392-8474 FAX: 909-392-8414 Class: C MANUFACTURER AIR INDUSTRIES CORP., 0000102796 12570 KNOTT ST. GARDEN GROVE, CA US, 92841-3998 TEL: 416 460 7048 FAX: 714 892 7904 Class: C MANUFACTURER AIR NIPPON CO. LTD., Class: 0000108750 Page 60 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval UTILITY CENTER BLDG. OHTA-KU, TOKYO, 13 JP, 1440041 TEL: 514 555 1212 FAX: 999 999 9999 D DISTRIBUTOR AIR NOSTRUM, 0000108724 AEROPUERTO DE VALENCIA MANISES, 46 ES, 46940 TEL: 9615 98850 FAX: 9615 98851 Class: D DISTRIBUTOR AIR PARTS & SUPPLY COMPANY, 0000134959 12840 SW 84TH AVENUE ROAD MIAMI, FL US, 33156 TEL: 305 235 5401 FAX: 305 235 8185 Class: D DISTRIBUTOR AIR PRECISION, 0000102971 5 DENIS PAPIN LE PLESSIS ROBINSON, CEDEX, 92 FR, 92350 TEL: 331 4601 2114 FAX: 331 4632 5207 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: EASA approval F-045 & FAA Repair Station dual approval XP9Y806J. AIR PRODUCTS N.V, 0000134958 AREBEDKAAI 1 GENT, 02 BE, 9042 TEL: 32 2 710 62 98 FAX: 514 855 5000 Class: C MANUFACTURER AIRBUS INDUSTRIE, 0000133095 1 ROND POINT, M BELLONTE BLAGNAC, 31 FR, 31707 TEL: 0561186095 FAX: 0561186095 Class: A SUBCONTRACTORS AIRCELLE GROUPE LE HAVRE, 0000122306 ROUTE DU PONT VIII GONFREVILLE L'ORCHER, 76 FR, 76700 TEL: 33 1 64 14 80 33 FAX: 02 35 55 35 0 Class: B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: LIMITED TO PART NO 123905-53CA, 123905-81CA ,123905-51CA,123905-55CA,123905-57CA Systems with Limitations: 2101 MRB APPROVAL - MINOR ONLY Page 61 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval AIRCELLE SA, 0000108056 33 AVE. JEAN-MONNET COLOMIERS, 31 FR, 31771 TEL: 0561 305 959 FAX: 0561 305 900 Class: A SUBCONTRACTORS AIRCRAFT & COMMERCIAL, 0000106699 12400 E. 75TH ST. S. DERBY, KS US, 67037-9561 TEL: 316 788 0400 FAX: 316 788 6700 Class: D DISTRIBUTOR AIRCRAFT BELTS INC., 0000116358 1176 TELECOM DR. CREEDMOOR, NC US, 27522-8294 TEL: 800 847 5651-27 FAX: 919 956 4395 Class: E MAINTENANCE ORGANIZATION AIRCRAFT COVERS UNLIMITED LLC., 0000123035 1632 S. WEST ST., SUITE 1 WICHITA, KS US, 67213 TEL: 316 777 1394 FAX: 316 777 0510 Class: C MANUFACTURER AIRCRAFT INSTRUMENT, 0000101014 1853 S. EISENHOWER CT. WICHITA, KS US, 67209-2845 TEL: 316 945 0445 FAX: 316 945 8014 Class: D DISTRIBUTOR E MAINTENANCE ORGANIZATION AIRCRAFT INSTRUMENTS CO., 0000107697 4039 SKYRON DR. DOYLESTOWN, PA US, 18902-1121 TEL: 215 348 5274 FAX: 215 345 5244 Class: B EQUIPMENT SUPPLIERS AIRCRAFT INTERIOR PRODUCTS, 535 S. EMERSON ST. WICHITA, KS US, 67209-2161 Class: Systems with Limitations: A SUBCONTRACTORS 0000 GENERAL LIMITATION / REMARKS H COMMERCIAL OFF THE SHELF Limitation: Limited to Commercial off the shelf goods 0000101255 Specification Controlled: PSPEC 910 ETCH AND EPOXY PRIMING Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limiited to Seat Covers & L85 Engine Covers Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 62 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 316 866 2203 FAX: 316 866 2403 AIRCRAFT MISSILE PARTS MANUFACTURIN, 0000106701 125 GEARHART STREET MILLERSBURG, PA US, 17061 TEL: 1 800 925 2126 FAX: 717 692 2120 Class: C MANUFACTURER AIRCRAFT PLYWOOD MFG. INC., 0000108315 620 M THIRTEENTH ST. HIGHLAND, IL US, 62249 TEL: 618 654 6740 FAX: 618 654 7266 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 52 AIRCRAFT SECURITY & ALERT, 0000104826 5 GRANTLEY CT. DALLAS, TX US, 75230-1969 TEL: 214 956 9563 FAX: 214 956 9960 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Locking systems AIRCRAFT TECHNOLOGIES INC., 0000101002 3650 HIGHPOINT ST. SAN ANTONIO, TX US, 78217-2892 TEL: 210-590-6858-... FAX: 210-590-7509 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION Specification Controlled with Limitations: LES 1033 ELECTRICAL BONDING Limitation: Preparation Methods per SP1 and SP3 only Sealing Method per SM1 only AIRCRAFT WINDOW REPAIRS CO., 0000108852 2207 BORDER AVE. TORRANCE, CA US, 90501-3612 TEL: 310-212-7173-206 FAX: 310 212 0905 Class: E MAINTENANCE ORGANIZATION AIRDROME PRECISION COMPONENTS, 0000100923 14800 S. FIGUEROA STREET GARDENA, CA US, 90248 TEL: 562-426-9411-230 FAX: 562 733 1067 Class: C MANUFACTURER AIRFASCO INDUSTRIES, 0000106704 2655 HARRISON AVE. S. W. CANTON, OH Class: C MANUFACTURER Page 63 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval US, 44706-3047 TEL: 330 430 6190 FAX: 330 430 6199 AIRGAS MERCHANT GASES LLC., 0000137481 6055 ROCKSIDE WOODS BLVD INDEPENDENCE, OH US, 44131 TEL: 514-855-5000 FAX: 514-855-5000 Class: C MANUFACTURER AIRGRUP S.L., 0000124074 PARQUE TECNO. AEROPOLIS LA RINCONADA, 41 ES, 41309 TEL: 954 115 085 FAX: 945 298 167 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 174-09 INSTALLATION OF WIGGINS TYPE COUPLINGS ON RIGID PLUMBING LINES BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS Page 64 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limitation to preparation only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation to type II only. BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: Limited for Aging of 6061 alloys (0.8 to 3.2 mm thick) at 177°C (350°F). BAPS 168-13 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: Limited to Rockwell Hardness & Conductivity Testing only. BAPS 172-34 FUSION WELDING Limitation: Andres Delgado (AG-S4) and Israel Moreno (AG-S13) qualified for GTAW for group IIA and IV Limitation: for parameters, positions and ranges defined in the qualification test report AIRINMAR LTD., 0000119620 HOGWOOD INDUSTRIAL ESTATE FINCHAMPSTEAD, BK GB, RG40 4QQ TEL: 0118 932 8800 FAX: 0118 932 8946 Class: E MAINTENANCE ORGANIZATION AIRLINX, 0000110966 1921 CARNEGIE E., UNIT 3F SANTA ANA, CA US, 92705-5510 TEL: 949 786 7464 FAX: 949 786 6248 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to part no's V9541AR12C00, V1002-012C00, V1012-012A00 AIRLITE PLASTICS CO., 0000118542 2860 BATH PIKE NAZARETH, PA US, 18064-8898 TEL: 610 759 0280 FAX: 610 759 0650 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM-001 venodr code 817 AIRMARK INTL. INC., Class: Systems with Limitations: 0000101643 Page 65 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 1771 RAILROAD ST. CORONA, CA US, 92880-2511 TEL: 800 420 5349 FAX: 951 272 6151 D DISTRIBUTOR 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Limited to FAA Repair Station Certificate A03R334N AIRNAV ELECTRONICS LTEE., 0000106696 9325 RYAN AVE., SUITE 200 DORVAL, QC CA, H9P 1A2 TEL: 514-631-1233 FAX: 514-631-1296 Class: E MAINTENANCE ORGANIZATION AIRPATH INSTRUMENT CO., 0000100872 13150 TAUSSIG AVE. BRIDGETON, MO US, 63044-1294 TEL: 314 739 8117 FAX: 314 739 1564 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER AIRSCREW LTD., 0000106755 111 WINDMILL ROAD SUNBURY-ON-THAMES, MX GB, TW16 7EF TEL: 01932 754469 FAX: 01932 761098 Class: C MANUFACTURER AIRSHOW INC. DIV. OF ROCKWELL, 0000119816 291 CAMPILLO AVE., SUITE A CALEXICO, CA US, 92231 TEL: 714 929 4638 FAX: 714 929 4601 Class: B EQUIPMENT SUPPLIERS AIRTECH EUROPE SARL, 0000131524 ZONE INDUSTRIELLE, HANEBOESCH DIFFERDANGE, LU LU, 4562 TEL: 352582282-220 FAX: 352584935 Class: C MANUFACTURER AIRTECH INTL. INC., 0000106707 5700 SKYLAB ROAD HUNTINGTON BEACH, CA US, 92647-2055 TEL: 714 899 8100 FAX: 714 899 8179 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM #13 Page 66 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification AIRTECH SUPPLY INC., 0000136839 3058 HWY 290 HOT SPRINGS, AR US, 71913 TEL: 501-525-7707 FAX: 501-262-2400 Class: A SUBCONTRACTORS AIRTECH-BRAID GMBH, 0000130581 MONSCHAUER STRASSE 44 MOENCHENGLADBACH, 05 DE, 41068 TEL: 2161595790 FAX: 999 999 9999 Class: C MANUFACTURER AIRWORTHINESS RESOURCES CORP., 0000107922 12-53412 RANGE ROAD 272 SPRUCE GROVE, AB CA, T7X 3N2 TEL: 780 962 6633 FAX: 780 960 0229 Class: C MANUFACTURER AJ OSTER FOILS INC., 0000109809 2081 MCCREA ST. ALLIANCE, OH US, 44601 TEL: 514 555 1212 FAX: 999 999 9999 Class: D DISTRIBUTOR AJ WALTER AVIATION LTD, Class: 0000136492 Scope of Approval Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Touch up BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Touch up BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual riveting. BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING Limitation: Touch up BAPS 157-27 INTEGRAL FUEL TANK SEALING Limitation: Wet installation of fasteners and faying surface for installation of nutplates. BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Wet installation of fasteners and faying surface for installation of nutplates. Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: LIMITED TO P/N A65 MANIFOLD Page 67 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification MAYDWELL AVENUE SLINFOLD, SW GB, RH13 0AS TEL: 441403798000 FAX: 441403710936 D DISTRIBUTOR J LOGISTIC PROVIDER AJW TECHNIQUE INC., 0000134155 7055 ALEXANDER FLEMING ST., # 100 SAINT-LAURENT, QC CA, H4S 2B7 TEL: 514 339 5094 FAX: 514 339 5246 Class: E MAINTENANCE ORGANIZATION AK STEEL CORP., 0000108870 U.S.23 ASHLAND, KY US, 41105 TEL: 606 329 7111 FAX: 606 329 7774 Class: C MANUFACTURER AK STEEL COSHOCTON WORKS, 0000108874 17400 U.S. 16 COSHOCTON, OH US, 43812 TEL: 740 829 4358 FAX: 740 829 4211 Class: C MANUFACTURER AK STEEL MANSFIELD WORKS, 0000108876 913 BOWMAN ST. MANSFIELD, OH US, 44903-4109 TEL: 419 755 3011 FAX: 419 755 3813 Class: C MANUFACTURER AK STEEL ROCKPORT WORKS, 0000108875 6500 N. US 231 ROCKPORT, IN US, 47635 TEL: 812 362 6000 FAX: 812 362 6800 Class: C MANUFACTURER AK STEEL ZANESVILLE WORKS, 0000108871 1724 LINDEN AVE. ZANESVILLE, OH US, 43701-2307 TEL: 740 450 5543 FAX: 740 450 5590 Class: C MANUFACTURER Learjet Approved Suppliers Scope of Approval Page 68 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification AKROFIRE, INC., 0000104459 9001 ROSEHILL ROAD LENEXA, KS US, 66215-3515 TEL: 913 888 7172 FAX: 913 888 7372 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER AKRON PAINT & VARNISH INC., 0000106708 1390 FIRESTONE PKWY. AKRON, OH US, 44301-1624 TEL: 330-773-8911 FAX: 330 773 1028 Class: C MANUFACTURER AKZO NOBEL AEROSPACE COATINGS, 0000107970 RIJKSSTRAATWEG 31 SASSENHEIM, 12 NL, 2171 AJ TEL: 847 625 3338 FAX: 7130 82490 Class: C MANUFACTURER AKZO NOBEL AEROSPACE COATINGS, 0000109873 UNIT 1, MERIDIAN W., MERIDIAN PARK LEICESTER, LE GB, LE19 1WX TEL: 0116 2234123 FAX: 0116 2234141 Class: C MANUFACTURER AKZO NOBEL COATINGS INC, 0000101284 1 EAST WATER STREET WAUKEGAN, IL US, 60085-5635 TEL: 847 625 3336 FAX: 847 625 3222 Class: C MANUFACTURER AL AIR LIQUIDE ESPANA, S.A., 0000130315 PO CASTELLANA, 35, 62 PTA MADRID, 28 ES, 28046 TEL: 34915029301 FAX: 999 999 9999 Class: C MANUFACTURER ALARIN AIRCRAFT HINGE, 6231 RANDOLPH ST. CITY OF COMMERCE, CA US, 90040-3514 Class: C MANUFACTURER 0000106709 Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 69 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 323-468-8522 FAX: 323 726 0639 ALAXIA AEROSYSTEMS S.A. DE C.V., 0000128554 CARR. MEXICO QUERETARO KM. 181.5 S.N. PEDRO ESCOBEDO, QRO MX, 76700 TEL: 442 238 0900 FAX: 442 238 0905 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Specification Controlled with Limitations: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to Type 2 Manual Application – Alodine 1132 Touch and Prep Pen ALBERTA INNOVATES - TECHNOLOGY FUTU, 250 KARL CLARCK ROAD EDMONTON, AB CA, T6N 1E4 TEL: 780-450-5111 FAX: 780-450-5333 0000108881 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: INDEPENDANT LABORATORY Specification Controlled with Limitations: BAERD-GEN-018-5F FUELS, LUBRICANTS, SOLVENTS (FORMERLY IE) Limitation: Limited to BA internal usage ONLY ALCOA EUROPE, 0000109675 KITTS GREEN ROAD KITTS GREEN, WM GB, B33 9QR TEL: 0121 252 8000 FAX: 0121 252 8001 Class: C MANUFACTURER ALCOA FASTENING SYSTEMS, 0000128421 15 RUE DU PETIT ALBI CERGY ST-CHRISTOPHE, 95 FR, 95800 TEL: 134 339 800 FAX: 134 339 777 Class: D DISTRIBUTOR ALCOA FASTENING SYSTEMS, Class: 0000103071 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Page 70 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 3724 E. COLUMBIA ST. TUCSON, AZ US, 85714-3410 TEL: 520 519 7516 FAX: 310 220 6680 C MANUFACTURER ALCOA FASTENING SYSTEMS, 0000125437 1508 CENTRE ROAD CLAYTON, VIC AU, 3168 TEL: 613 854 53381 FAX: 999 999 9999 Class: C MANUFACTURER ALCOA FASTENING SYSTEMS, 0000107338 1300 RANCHO CONEJO BLVD. NEWBURY PARK, CA US, 91320-1405 TEL: 805 262-4200 FAX: 805 498 4250 Class: C MANUFACTURER ALCOA FASTENING SYSTEMS, 0000123994 135 N. UNRUH AVE. CITY OF INDUSTRY, CA US, 91744-4427 TEL: 626-968-3831 FAX: 626 937 5452 Class: C MANUFACTURER ALCOA FASTENING SYSTEMS, 0000103175 900 E. WATSON CENTER ROAD CARSON, CA US, 90745-4201 TEL: 714-278-8793 FAX: 310 220 6680 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER ALCOA FASTENING SYSTEMS, 0000110252 Z. I. DE SURVAURE ROUTE DE BOEN MONTBRISON, 42 FR, 42602 TEL: 477 58 1718 FAX: 477 58 5772 Class: C MANUFACTURER ALCOA FASTENING SYSTEMS - REDDITCH, CROSSGATE ROAD PARK FARM IND.E REDDITCH, WC GB, B98 7TD TEL: 1527 525719 FAX: 1527 526881 0000107162 Learjet Approved Suppliers Scope of Approval Class: C MANUFACTURER Page 71 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address ALCOA FASTENING SYSTEMS AND RINGS -, 10685 BEECH AVE. FONTANA, CA US, 92337-7204 TEL: 909 350 9260 FAX: 909 350 8658 Classification 0000107015 Class: C MANUFACTURER Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 725 ALCOA FASTENING SYSTEMS FAIRCHILD, 0000106831 INDUSTRIESTRABE 6 KELKHEIM, 06 DE, 65779 TEL: 06195 805 0-250 FAX: 0619 5805280 Class: C MANUFACTURER ALCOA FORGINGS AND EXTRUSIONS, 0000108131 3131 E. MAIN ST. LAFAYETTE, IN US, 47905-2272 TEL: 765 771 3600 FAX: 765 771 3301 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM ALCOA FORGINGS AND EXTRUSIONS-CHAND, 6833 W. WILLIS ROAD CHANDLER, AZ US, 85226-5238 TEL: 520 796 1098 FAX: 520 796 0369 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM 0000108509 ALCOA GLOBAL FASTENERS INC., 0000101180 3990-A HERITAGE OAK CT. SIMI VALLEY, CA US, 93063-6715 TEL: 805 426 2234- FAX: 805 426 2434 Class: D DISTRIBUTOR ALCOA GLOBAL FASTENERS INC., 0000107394 3016 W. LOMITA BLVD. TORRANCE, CA US, 90505-5103 TEL: 310 784 4368 FAX: 310 220 6680 Class: C MANUFACTURER ALCOA GLOBAL FASTENERS INC., 3000 W. LOMITA BLVD. TORRANCE, CA US, 90505-5103 Class: C MANUFACTURER 0000103693 Page 72 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 310-784-2602 FAX: 310 220 6680 ALCOA INC., 0000109204 4879 STATE ST. RIVERDALE, IA US, 52722-5775 TEL: 800 523 9596 FAX: 877 359 1450 Class: A SUBCONTRACTORS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: See EMCM # 19 ALCOA LTD., 0000108385 PARK AVE. E. MASSENA, NY US, 13662 TEL: 315-764-4392 FAX: 315-764-4618 Class: C MANUFACTURER ALCOA MILL PRODUCTS, 0000108906 1480 MANHEIM PIKE LANCASTER, PA US, 17601-3152 TEL: 717-393-9641 FAX: 717 293 3384 Class: C MANUFACTURER ALCOA WHEEL & FORGED PRODUCTS, 0000108306 1600 HARVARD AVE. CLEVELAND, OH US, 44105-3092 TEL: 765 771 3473 FAX: 765 771 3195 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 18 ALCORE INC., 0000117696 1502 QUARRY DR. EDGEWOOD, MD US, 21040-1047 TEL: 410 676 7100-228 FAX: 410 676 7200 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS ALCOTEC WIRE CORP., 0000108524 2750 AERO PARK DR. TRAVERSE CITY, MI US, 49686-9263 TEL: 800 228 0750 FAX: 231 941 1050 Class: C MANUFACTURER Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 73 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification ALEMITE LLC., 0000107426 167 ROWELAND DR. JOHNSON CITY, TN US, 37601-3832 TEL: 423 928 8203 FAX: 423 928 7640 Class: C MANUFACTURER ALENIA AERMACCHI, S.P.A., 0000126756 VIA BOSCO FANGONE NOLA, NA IT, 80035 TEL: 081 315 4172 FAX: 081 234 7563 Class: A SUBCONTRACTORS Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Approval limited to oven STSM32 in building #6. BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Limited to NOLA 2 Paint booth in BUILDING 6 BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Limited to NOLA 2 Paint booth in BUILDING 6. BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Limited to wet installation & fillet sealing of bushings and bearings only in Alenia-Nola Limitation: building 6. Page 74 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 160-10 CHROMIC ACID ANODIZING Limitation: Limited to surface treatment line NOLA 2 BUILDING 6 BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to Type 2 manual application only at the surface treatment line NOLA 2 - BUILDING 6 BAPS 168-13 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: Limited to Electrical Conductivity testing only at NOLA site - BUILDING 6. BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limited to installation of interference fit bushings using liquid nitrogen only. BAPS 175-006 INSTALLATION OF BUSHING USING FORCEMATE COLD EXPANSION PROCESS Limitation: Limited to Class 2 Installation of special design ForceMate bushings only. BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Limitation: Limited to Fluorescent Penetrant Inspection line NOLA 2 - BUILDING 6 BAPS 180-01 ALKALINE CLEANING Limitation: Limited to surface treatment line NOLA 2 BUILDING 6 BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS Limitation: Limited to surface treatment line NOLA 2 BUILDING 6 BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS Limitation: Limited to surface treatment line NOLA 2 BUILDING 6 BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Limitation: Limited to surface treatment line NOLA 2 BUILDING 6 BAPS 185-02 SHOT PEENING OF METAL PARTS Limitation: Limited to Building #6, Pangborn ES 8041 shot peening machine used in compliance with Limitation: the latest revision of the approved technique sheet. Page 75 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 185-03 PEEN FORMING OF METAL PARTS Limitation: Limited to peen forming within Alenia-Nola building #6 ALERIS ALUMINIUM (ZHENJIANG) CO., L, 0000132398 NO.111 CAIJIA ROAD, JINGKOU INDUSTRIAL Z ZHENJIANG, 100 CN, 212006 TEL: 514 855 5000 FAX: 514 855 5000 Class: C MANUFACTURER ALERIS ALUMINIUM DUFFEL BVBA, 0000119542 A. STOCLETLAAN 87 DUFFEL, 01 BE, 2570 TEL: 015 30 21 11 FAX: 015 30 27 94 Class: C MANUFACTURER ALERIS ALUMINUM KOBLENZ GMBH, 0000110650 CARL-SPAETER-STRABE 10 KOBLENZ, 07 DE, 56070 TEL: 261 891 7264 FAX: 261 891 7533 Class: C MANUFACTURER ALERIS ROLLED PRODUCTS, LLC, 0000108753 1372 STATE ROAD 1957 LEWISPORT, KY US, 42351-6968 TEL: 270 295 3451 FAX: 270 295 5214 Class: C MANUFACTURER ALEXANDER BOYD DISPLAYS LTD, 0000131831 LAMBERG MILLS LAMBERG LISBURN, AT GB, BT275SX TEL: 02890301115 FAX: 02890301115 Class: A SUBCONTRACTORS ALFA ADHESIVES INC., 0000106438 15 LINCOLN ST. HAWTHORNE, NJ US, 07506-1423 TEL: 973 423 9266 FAX: 973 423 9264 Class: C MANUFACTURER ALFA PRECISION CASTING S.A., Class: 0000131607 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM supplier #1113 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM supplier #243 Systems with Limitations: Page 76 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification TORREKUA N.3 EIBAR, 20 ES, 20600 TEL: 943820300 FAX: 34943204030 C MANUFACTURER ALIGN AEROSPACE FRANCE, 0000106998 26 ALLEE DU CLOS DES CHARMES COLLEGIEN, 77 FR, 77090 TEL: 1600 69650 FAX: 1600 61275 Class: D DISTRIBUTOR ALIGN AEROSPACE LLC, 0000101110 301 STEPHENS ST. E., SUITE 150 ARLINGTON, TX US, 76018-5248 TEL: 817 719 2472 FAX: 817 719 2488 Class: D DISTRIBUTOR ALIGN AEROSPACE LLC, 0000104403 21123 NORDHOFF ST. CHATSWORTH, CA US, 91311-5816 TEL: 818-773-5485 FAX: 818-7735485 Class: D DISTRIBUTOR ALINABAL INC., 0000101159 28 WOODMONT ROAD MILFORD, CT US, 06460-8572 TEL: 203 877 3241-377 FAX: 203 874 5063 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS C MANUFACTURER ALL METAL SERVICES, 0000107972 UNIT D, SYDENHAM BUSINESS PARK BELFAST, DN GB, BT3 9LE TEL: 2890 739 648 FAX: 2890 739 649 Class: D DISTRIBUTOR ALL METAL SERVICES, 0000127499 UNIT 6, HORTON INDUSTRIAL PARK Class: D DISTRIBUTOR Learjet Approved Suppliers Scope of Approval 0000 GENERAL LIMITATION / REMARKS Limitation: Approved for part Number: C02117061-001 and C02117060-001 (including BAERD-GEN-009 INSPECTION AND QUALIFICATION REQUIREMENTS FOR AIRCRAFT CASTINGS), Limitation: Limitation: providing that the heat treatment of those parts is done at a Bombardier approved supplier. Specification Controlled with Limitations: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF Page 77 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification WEST DRAYTON, MX GB, UB7 8JD TEL: 1895 444066 FAX: 1895 420963 Learjet Approved Suppliers Scope of Approval METALS Limitation: VERIFICATION OF MATERIAL ONLY ALL METAL SERVICES (XI'AN), 0000125032 UNIT 5 XI AN EXPORT ZONE XI AN, 050 CN, 710016 TEL: 29 86125300 FAX: 29 86402324 Class: D DISTRIBUTOR ALL METAL SERVICES LTD., 0000106712 UNIT 3 TRILLENNIUM GORSEY LANE COLESHILL, BI GB, B46 1JU TEL: 1675 430307 FAX: 1675 430346 Class: D DISTRIBUTOR Specification Controlled with Limitations: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: VERIFICATION OF MATERIAL ONLY ALL METAL SERVICES LTD., 0000107973 WINGATES INDUSTRIAL PARK, UNIT 8 WESTHOUGHTON, GM GB, BL5 3XH TEL: 1942 840 777 FAX: 1942 815 229 Class: D DISTRIBUTOR Specification Controlled with Limitations: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: VERIFICATION OF MATERIAL ONLY ALL POWER MFG. CO., 0000106713 13141 MOLETTE ST. SANTA FE SPRINGS, CA US, 90670-5523 TEL: 562 802 2640-101 FAX: 562 921 9933 Class: C MANUFACTURER ALLAN AIRCRAFT SUPPLY CO., 0000102794 11643 VANOWEN ST. N. HOLLYWOOD, CA US, 91605-6128 TEL: 818-765-4992-141 FAX: 818-503-9708 Class: C MANUFACTURER ALLEGHENY TECHNOLOGIES LTD., 0000108074 KEYS HOUSE, GRANBY AVE. BIRMINGHAM, WM GB, B33 0SP TEL: 0121 789 8030 FAX: 0121 789 8027 Class: D DISTRIBUTOR ALLEGRO MICROSYSTEMS INC., Class: 0000109004 Systems with Limitations: Page 78 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 115 CUTOFF N. E. WORCESTER, MA US, 01606-1224 TEL: 508 853 5000 FAX: 508 853 5049 C MANUFACTURER 0000 GENERAL LIMITATION / REMARKS Limitation: P/N UDN2984A (N539-9278) ALLEN AIRCRAFT PRODUCTS INC., 0000100986 6168 WOODBINE ST. RAVENNA, OH US, 44266-9665 TEL: 330 298 3448 FAX: 330-296-5532 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: FOR DE HAVILLAND, AIRCRAFT VALVES TO DHI DRWG. ALLFAST FASTENING SYSTEMS, LLC., 0000100887 15200 DON JULIAN ROAD E. CITY OF INDUSTRY, CA US, 91745-1001 TEL: 626-855-7183 FAX: 626 968 9393 Class: C MANUFACTURER ALLIED INTERNATIONAL CORP. *CC, 0000101749 7 HILL ST. BEDFORD HILLS, NY US, 10507-1811 TEL: 914 241 6900 FAX: 914 241 6985 Class: D DISTRIBUTOR ALLISTER MOORE WELDIND &, 0000117993 MCKINNEY INDUSTRIAL ESTATE NEWTOWNABBEY, NA GB, BT36 8PX TEL: 02890 843 676 FAX: 02890 838 830 Class: D DISTRIBUTOR ALLOY HEAT TREATMENT, 0000119144 UNIT 18, GRAZEBROOK INDUSTRIAL PARK DUDLEY, WM GB, DY2 0XW TEL: 01384 456777 FAX: 01384 257423 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS PSPEC 401 HEAT TREATMENT OF ALUMINIUM AND ALUMINIUM ALLOYS ALLOY PROCESSING, 0000119564 1900 W. WALNUT ST. COMPTON, CA US, 90220-5019 TEL: 310-635-9995 FAX: 310-635-9936 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: a) Approved to NADCAP AC7004. Specification Controlled: Page 79 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-32 SULFURIC ACID ANODIZING BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY PPS 20.03 PENETRANT FLAW DETECTION PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 32.01 CROMATE CONVERSION COATING PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PPS 34.16 APPLICATION OF EPOXY-AMINE, URETHANE COMPATIBLE, INTERMEDIATE PRIMER (F23) PSPEC 411 SULPHURIC ACID ANODISING Specification Controlled with Limitations: BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 1 only Page 80 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS Limitation: a) Supplier is mixing & applying F21 primer on fuel tank detail parts only. PPS 31.02 CLEANING PROCESSES OF ALUMINUM Limitation: a) Supplier is performing alkaline cleaning & deoxidizing by immersion only. Limitation: b) Supplier is neither processing dissimilar metals nor spot welded components. PPS 32.02 MANUAL APPLICATION OF CHEMICAL CONVERSION COATINGS Limitation: a) Manual touch-up of Alodine #1200S for Aluminum Alloy parts only. ALLSTATES RUBBER & TOOL CORP., 0000106716 8201 183ST. W. TINLEY PARK, IL US, 60487-9248 TEL: 708 342 1030 FAX: 708 342 1033 Class: C MANUFACTURER ALPHA WIRE CORP., 0000103692 711 LIDGERWOOD AVE. ELIZABETH, NJ US, 07207 TEL: 908 925 8000 FAX: 908-925-7613 Class: C MANUFACTURER ALPHACASTING INC., 0000106718 391 STE-CROIX ST-LAURENT, QC CA, H4N 2L3 TEL: 514 748 7511-224 FAX: 514 748 0237 Class: A SUBCONTRACTORS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Specification Controlled: BAPS 176-02 FLUORESCENT PENETRANT INSPECTION PPS 20.03 PENETRANT FLAW DETECTION PPS 20.08 HARDNESS TESTING PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 35.07 REQUIREMENTS FOR INVESTMENT AND SAND CASTINGS Specification Controlled with Limitations: BAPS 168-13 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: Limitation: Hardness Testing PPS 37.03 FUSION WELDING OF ALUMINUM AND ALUMINUM ALLOYS Page 81 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Limitation: limitation to repair only. PPS 37.06 TESTING AND APPROVAL OF AIRCRAFT WELDERS Limitation: 1. Limited to aluminum Weld repair of castings only. Limitation: 2. Limited to welder: Joseph Stanford. Limitation: 1. Limited to aluminum Weld repair of castings only. Limitation: 2. Limited to welder: Joseph Stanford. Limitation: limitation to aluminum Weld repair of casting only. PPS 37.10 REQUIREMENTS FOR FUSION WELDS Limitation: limitation to Weld repair Inspection. ALPINE COMPONENTS LLC., 0000108714 340 LAKESIDE DR. PAGOSA SPRINGS, CO US, 81147-7008 TEL: 970 731 4280 FAX: 970 731 4281 Class: C MANUFACTURER ALROSE PRODUCTS, 0000101664 UNITS 3-4 KING ST. INDUSTRIAL ESTATE LANGTOFT, PB GB, PE6 9NF TEL: 1778 560859 FAX: 1778 560400 Class: B EQUIPMENT SUPPLIERS ALTEMA-FRANCE, 0000133984 34 RUE MARECHAL FOCH PONTACQ, 64 FR, 64530 TEL: 33(0)559536553 FAX: 514 855 5000 Class: A SUBCONTRACTORS ALTIS AERO SYSTEMS INC., 0000108934 101 COLEMAN BLVD. SAVANNAH, GA US, 31408-9566 TEL: 912 748 1800 FAX: 912 748 9060 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 174-16 ASSEMBLY AND INSTALLATION OF SIERRACIN/HARRISON SLEEVES AND UNIONS ON PLUMBING LINES BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-17 RADIOGRAPHIC INSPECTION LES 1004 PENETRANT INSPECTION LES 1006 INSPECTION, MAGNETIC PARTICLE Page 82 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval LES LES LES LES PPS 1009 INSPECTION, RADIOGRAPHIC 1014 WELDING, FUSION FERROUS METALS 1015 WELDING FUSION, ALUMINUM ALLOYS 1371 WELDING, FUSION - TITANIUM 25.50 RTV SILICONE ADHESIVES Specification Controlled with Limitations: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 172-34 FUSION WELDING Limitation: 6061-T6, Tube fillet, 2F Limitation: Dino VanBrussel only Limitation: Group IV only Limitation: Sheet Fillet weld 1F and 2F only Limitation: Tube Fillet 1F and 2F only Limitation: Thickness limitation 0.019 in. to 0.112 in. Limitation: Limitation: 6061-T6, Tube Groove, 6G Limitation: Dino VanBrussel only Limitation: Group IV only Limitation: Groove weld only Limitation: Thickness limitation 0.023in. to 0.140 in. ALUMINIUMWERK UNNA, 0000108391 UELZENER WEG 36 UNNA, 03 DE, 59425 TEL: 2303 2060 FAX: 2303 206 116 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM ALUMINUM PRECISION PRODUCTS INC., 0000109782 1001 MCWARE BLVD. OXNARD, CA US, 93033 TEL: 805 488 4401 FAX: 805 986 5670 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS ALUMINUM PRECISION PRODUCTS INC., 0000106724 3333 WARNER AVE. W. SANTA ANA, CA US, 92704-5316 TEL: 800-411-8983 FAX: 714-540-8662 Class: A SUBCONTRACTORS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM supplier #268 Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Page 83 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 180-001 ALKALINE CLEANING PPS 20.03 PENETRANT FLAW DETECTION PPS 20.04 ULTRASONIC INSPECTION PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS PPS 35.08 REQUIREMENTS FOR ALUMINUM ALLOY FORGINGS (DHC-7 & SUBSEQUENT AIRCRAFT) PSPEC 300 PENETRANT FLAW DETECTION PSPEC 401 HEAT TREATMENT OF ALUMINIUM AND ALUMINIUM ALLOYS PSPEC 801 MANUAL INSTALLATION AND REMOVAL OF SOLID RIVETS AM-SAFE Inc, 0000102211 1043 N. 47TH AVE. PHOENIX, AZ US, 85043-1817 TEL: 602 850 2795 FAX: 602 850 2812 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval I6AR839J & EASA dual approval 145.4145. AMAG ROLLING GMBH, 0000108502 POSTFACH 32 RANSHOFEN, W AT, 5282 TEL: 7722 801 2558 FAX: 7722 809 461 Class: C MANUFACTURER AMARI AEROSPACE LTD., 0000125981 UNIT 1, MAURETANIA ROAD, NURSLING SOUTHAMPTON, HA GB, SO16 0YS TEL: 023 8074 2750 FAX: 023 8074 1947 Class: D DISTRIBUTOR AMATOM ELECTRONIC HARDWARE, 0000108974 5 PASCO HILL ROAD CROMWELL, CT US, 06416-1012 TEL: 860-828-0847-103 FAX: 860-828-0381 Class: C MANUFACTURER AMEREX CORP., 0000103403 7595 GADSDEN HWY. E. TRUSSVILLE, AL US, 35173-1629 TEL: 205 655 3271 FAX: 205 655 3279 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 832 Page 84 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval AMERICAN & EFIRD INC., 0000118238 601 AMERICAN ST. MOUNT HOLLY, NC US, 28120 TEL: 704 827 4311 FAX: 704 820 2857 Class: C MANUFACTURER AMERICAN AEROSPACE CONTROLS INC., 0000104429 570 SMITH ST. FARMINGDALE, NY US, 11735-1115 TEL: 631 694 5100 FAX: 631 694 6739 Class: C MANUFACTURER G INDIRECT PRODUCT AMERICAN AIRCRAFT PRODUCTS INC., 0000108229 15411 S. BROADWAY AVE. GARDENA, CA US, 90248-2207 TEL: 310-532-7434 FAX: 310 532 0758 Class: A SUBCONTRACTORS AMERICAN ELECTRONIC RESOURCE, INC., 3505-A CADILLAC AVE. COSTA MESA, CA US, 92626 TEL: 714 338 4400 FAX: 714 338 4433 Class: D DISTRIBUTOR Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: AER Inc is a valued added distributor, testing electronic components to Learjet LES 1524. AMERICAN FELT & FILTER CO., 0000108311 361 WALSH AVE. NEW WINDSOR, NY US, 12553-6727 TEL: 845 561 3560 FAX: 845 561 0967 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM AMERICAN GAS & CHEMICAL CO. LTD., 0000108312 220 PEGASUS AVE. NORTHVALE, NJ US, 07647-1904 TEL: 201 767 7300 FAX: 201 767 1741 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM AMERICAN HANDFORGE, 165 S. SPRUCE AVE. RIALTO, CA US, 92376 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limitation: EMCM 1067 0000108958 0000130298 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to Thread product A-A-59826 and V-T-285 Page 85 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 909 546 1917 FAX: 909 355 2255 AMERICAN METAL FABRICATION INC., 0000105282 2000 N. VANDENBURGH AVE. WELLINGTON, KS US, 67152-4433 TEL: 620 399 8508 FAX: 620 399 8525 Class: A SUBCONTRACTORS Specification Controlled: BAPS 174-02 FABRICATION OF PLUMBING LINES AMERICAN NATIONAL RUBBER CO., 0000108811 MAIN & HIGH STS. CEREDO, WV US, 25507 TEL: 304-453-1311 FAX: 304 453 2347 Class: C MANUFACTURER AMERICAN RING & TOOL CO., INC, 0000109046 30450 BRUCE INDUSTRIAL PKWY. SOLON, OH US, 44139-3940 TEL: 440-498-3730 FAX: 440-498-3736 Class: C MANUFACTURER AMERICAN SHIZUKI CORP., 0000110703 301 W. O ST. OGALLALA, NE US, 69153 TEL: 308 284 3611 FAX: 308 284 8324 Class: C MANUFACTURER AMERON GLOBAL PRODUCT SUPPORT, 0000102145 10271 BACH BLVD. ST-LOUIS, MO US, 63132-1317 TEL: 314 428 2062 FAX: 999 999 9999 Class: E MAINTENANCE ORGANIZATION AMETEK ADVANCED INDUSTRIES INC, 0000105813 4550 SOUTHEAST BLVD. WICHITA, KS US, 67210 TEL: 316 522 0424 FAX: 316 522 0237 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval #OO2R064L & EASA dual approval EASA.145.4019 AMETEK AERO, 0000100563 1080 N CROOKS CLAWSON, MI Class: D DISTRIBUTOR Page 86 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval US, 48017 TEL: 3134350700 FAX: 3134358120 AMETEK AEROSPACE & DEFENSE, 0000126125 1701 E. INDUSTRIAL ST. HIDALGO, TX US, 78557 TEL: 999 999 9999 FAX: 999 999 9999 Class: C MANUFACTURER AMETEK AEROSPACE PRODUCTS INC., 0000101292 50 FORDHAM ROAD WILMINGTON, MA US, 01887-2177 TEL: 978 988 4885 FAX: 978 988 4944 Class: B EQUIPMENT SUPPLIERS AMETEK AIRTECHNOLOGY GROUP LTD, 33 OAKFIELD ROAD PENGE LONDON, LO GB, SE20 8EW TEL: 0208659909 FAX: 0208659990 Class: B EQUIPMENT SUPPLIERS 0000102993 AMETEK AMERON, LLC., 0000101494 4750 LITTLEJOHN ST. BALDWIN PARK, CA US, 91706-2274 TEL: 626 856 0101 FAX: 626 960 0553 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER AMETEK INC., 0000106732 33 LEWIS ROAD BINGHAMTON, NY US, 13905-1045 TEL: 607-763-4736 FAX: 607-763-4706 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Limitation: FAA Repair Station approval 2AMR683Y and dual EASA approval 145.6174 AMETEK INC., 0000101442 1644 WHITTIER AVE. COSTA MESA, CA US, 92627-4415 TEL: 978 988 4952 FAX: 978-988-4944 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval GS9R108J & EASA dual approval EASA.145.5147. AMETEK INC., 0000101051 820 PENNSYLVANIA BLVD. Class: B EQUIPMENT SUPPLIERS Page 87 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval FEASTERVILLE TREVOSE, PA US, 19053 TEL: 215-354-1863 FAX: 215-354-1801 AMETEK PARTS AND ACCESSORIES INC., 1414 S. MOSLEY WICHITA, KS US, 67211-3387 TEL: 316-264-2397 FAX: 3162647898 0000101409 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval NE2R028L and dual EASA approval EASA.145.4228 AMETEK REYNOSA SERVICE CENTER, 0000117155 SAN JUAN AV. PARQUE INDUS. DEL NORTE REYNOSA, TMS MX, 88630 TEL: 978 988 4952 FAX: 978 988 4944 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION AMETEK ROTRON, 0000101306 55 HASBROUCK LANE WOODSTOCK, NY US, 12498-1807 TEL: 845 679 1324 FAX: 845 679 1861 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval AN1R014K & EASA dual approval EASA.145.4409. AMETEK THERMAL SYSTEMS INC., 0000105783 300 ENDO BLVD. GARDEN CITY, NY US, 11530-6708 TEL: 516-832-8811 FAX: 516-832-8054 Class: B EQUIPMENT SUPPLIERS AMFUEL, 0000101491 601 FIRESTONE DR. MAGNOLIA, AR US, 71753 TEL: 870 234 3381-... FAX: 870 235 7224 Class: B EQUIPMENT SUPPLIERS AMGLO KEMLITE LABS. INC., 0000110895 8787 ENTERPRISE BLVD. LARGO, FL US, 33773-2702 TEL: 727 812 2000 FAX: 727 812 2001 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to p/n: Limitation: A/K Q4681 (AHQH4628V450WXFCS ) Limitation: A/K Q 5587 (AHQV3628V250WPS) Limitation: Limited to Learjet program only . Page 88 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification AMI INDUSTRIES INC., 0000104673 1275 N. NEWPORT ROAD COLORADO SPRINGS, CO US, 80916-2779 TEL: 719-550-4413 FAX: 719 380 0040 Class: B EQUIPMENT SUPPLIERS AMI METALS EUROPE SPRL, 0000118322 LOUIS-BLERIOT 23 GOSSELIES, 05 BE, 6041 TEL: 32 71 37 67 99 FAX: 32 71 35 24 30 Class: D DISTRIBUTOR AMI METALS INC., 0000106384 10606 COMMERCE WAY FONTANA, CA US, 92337-8237 TEL: 800-695-1264 FAX: 615-277-9749 Class: D DISTRIBUTOR AMI METALS INC., 0000118297 586 N. BEACH ST. FORT WORTH, TX US, 76111-5940 TEL: 817 831 9586 FAX: 817 831 3819 Class: D DISTRIBUTOR AMI METALS INC., 0000133739 301 NORTH HAVEN STREET SPOKANE, WA US, 99202 TEL: 800 727 1903 FAX: 514 855 5000 Class: D DISTRIBUTOR AMI METALS INC., 0000111197 2535 S. KESSLER ROAD WICHITA, KS US, 67217 TEL: 316 945 7771 FAX: 316 945 7044 Class: A SUBCONTRACTORS D DISTRIBUTOR AMI-CON SUPPLIES LTD., 0000134723 UNIT 1 SWAN BUSINESS PARK, SANDPIT ROAD DARTFORD, KE Class: D DISTRIBUTOR Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: authorize to cut-to-size Page 89 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval GB, DA1 5ED TEL: 01322 224726 FAX: 01322 221934 AMPHENOL AEROSPACE, 0000103570 40-60 DELAWARE ST. SIDNEY, NY US, 13838-1395 TEL: 520-397-7159 FAX: 607 563 5157 Class: C MANUFACTURER AMPHENOL AIR LB N. AMERICA INC., 0000101591 3600 MATTE BLVD., SUITE J BROSSARD, QC CA, J4Y 2Z2 TEL: 978 624 3431 FAX: 450 444 1266 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER D DISTRIBUTOR AMPHENOL CANADA CORP., 0000102922 605 MILNER AVE. TORONTO, ON CA, M1B 5X6 TEL: 416-291-4401 FAX: 416-292-0647 Class: C MANUFACTURER AMPHENOL LTD., 0000107322 CROSSGATE DR., QUEENS DR., UNIT D1 NOTTINGHAM, NC GB, NG2 1LW TEL: 5098 66200 FAX: 5098 66212 Class: C MANUFACTURER AMPHENOL PCD INC., 0000109277 72 CHERRY HILL ROAD BEVERLY, MA US, 01915-1030 TEL: 978-624-3431 FAX: 978 532 6800 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER AMPHENOL RF., 0000103959 4 OLD NEWTOWN ROAD DANBURY, CT US, 06810-4200 TEL: 800 627 7100 FAX: 203 796 2032 Class: C MANUFACTURER AMPHENOL SOCAPEX, 0000125977 948 PROMENADE DE L'ARVE Class: D DISTRIBUTOR Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: VALUE ADDED TO PERFORME MINOR ASSEMBLY ON S5451 TYPE PARTS(FAIRLEAD) Page 90 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval THYEZ, 74 FR, 74311 TEL: 33450892800 FAX: 450 89 28 74 AMSAFE BRIDPORT, 0000136539 THE COURT, WEST STREET BRIDPORT, DO GB, DT5 1BT TEL: 00441308456666 FAX: 00441308456605 Class: B EQUIPMENT SUPPLIERS AMT A DIVISION OF SENIOR OPERATIONS, 20100 71ST AVE. N.E. ARLINGTON, WA US, 98223-7447 TEL: 360-435-1119 FAX: 360 435 1158 Class: A SUBCONTRACTORS Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS INDEPENDANT LABORATORY ANACHEM LABORATORIES LLC., 0000114457 140 STANDARD ST. EL SEGUNDO, CA US, 90245-3832 TEL: 310 322 4993 FAX: 310 322 6681 0000109312 Specification Controlled with Limitations: BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. Page 91 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval ANALOG DEVICES INC., 0000103229 1 TECHNOLOGY WAY NORWOOD, MA US, 02062-2634 TEL: 781 329 4700 FAX: 781 326 8703 Class: C MANUFACTURER ANATASE PRODUCTS, 0000102339 1314 GOODRICK DR. TEHACHAPI, CA US, 93561-1508 TEL: 661 822 6873 FAX: 661 823 7312 Class: C MANUFACTURER ANCRA INTERNATIONAL LLC., 0000101919 875 W., 8TH ST. AZUSA, CA US, 91702 TEL: 626-765-4891 FAX: 310 973 1138 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS C MANUFACTURER ANCRA INTERNATIONAL LLC., 0000100664 2685 CIR. PORT DR. ERLANGER, KY US, 41018-1486 TEL: 800 233 5138 FAX: 3109733488 Class: C MANUFACTURER ANDANTEX USA INC., 0000107701 1705 VALLEY ROAD WANAMASSA, NJ US, 07712-3916 TEL: 732 493 2812 FAX: 732 493 2949 Class: B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limitation to P/N R3000-2 (N599-8208) ANDEROL INC., 0000105214 215 MERRY LANE EAST HANOVER, NJ US, 07936-3900 TEL: 973887 7410 FAX: 973 887 6930 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Limitation: SEE EMCM Limitation: See EMCM-001 Supplier # 380 Limitation: SEE EMCM Limitation: See EMCM-001 Supplier # 380 Limitation: see EMCM-001 Supplier # 380 Page 92 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval ANDREWS ELECTRONICS, 0000117334 25158 STANFORD AVE. SANTA CLARITA, CA US, 91355 TEL: 661 257 7700 FAX: 800 289 0301 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods ANGELES COMPOSITE TECHNOLOGY INC., 0000108256 2138 W 18TH ST. PORT ANGELES, WA US, 98363-5123 TEL: 360 452 6776 FAX: 360 452 7015 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS PPS 10.21 CERTIFICATION OF AUTOCLAVES PPS 10.22 PREPARATION OF MOLDS PPS 10.23 STORAGE, HANDLING AND PREPARATION OF PRE-IMPREGNATED MATERIALS PPS 10.28 ASSEMBLY OF WIRE THERMOCOUPLES PPS 10.35 FABRICATION OF 250 F CURE, EPOXY RESIN PRE-IMPREGNATED, FIBRE REINFORCED COMPOSITE PARTS PPS 10.39 MACHINING OF FIBRE REINFORCED COMPOSITE PARTS PPS 25.30 BONDING USING DHMS A6.09 EPOXY ADHESIVE PPS 25.52 EC-2216 B/A GREY ADHESIVE PPS 32.01 CROMATE CONVERSION COATING PPS 34.08 EPOXY PRIME PPS 34.19 APPLICATION OF F14 ANTI-STATIC COATING PPS 34.34 SURFACE FINISHING COMPOUNDS (F33) PPS 34.41 APPLICATION OF EPOXY-POLYAMIDE ENAMEL (F22) Specification Controlled with Limitations: PPS 10.25 STORAGE & APPLICATION OF FILM ADHESIVES USED IN COMPOSITE ASSEMBLIES Limitation: Approval granted for PPS 10.25 limited to Section 5.2.2-DHMS A6.03 and Limitation: A6.08 Film Adhesive ANGLIA CNC ENGINEERING LIMITED, 20 BURREL ROAD ST IVES, CA GB, PE27 3LB 0000133361 Class: A SUBCONTRACTORS Specification Controlled with Limitations: BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Installation of interference fit bushings using liquid nitrogen only. Page 93 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 01480 464624 FAX: 514 855 5000 ANILLO INDUSTRIES INC., 0000101304 2090 GLASSELL N. ORANGE, CA US, 92865-3391 TEL: 714 637 7000 FAX: 714 637 3022 Class: A SUBCONTRACTORS C MANUFACTURER Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAERD-GEN-018-5F FUELS, LUBRICANTS, SOLVENTS (FORMERLY IE) BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 185-01 BARREL AND VIBRATORY FINISHING CAPTIVE LABORATORY LES 1323 PASSIVATION OF CORROSION RESISTANT STEEL MPS 160-08 CADMIUM PLATING OF CARBON AND LOW ALLOY STEELS BELOW 220,000PSI, COPPER ALLOYS AND CRES STEELS PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 32.01 CROMATE CONVERSION COATING PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 33.01 CADMIUM PLATING (E1) PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PSPEC 410 CHROMIC ACID ANODISING PSPEC 419 CHEMICAL CONVERSION COATING OF ALUMINIUM AND ALUMINIUM ALLOYS Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Page 94 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval Limitation: Limitation: Oven # 678, cure at a nominal temperature of 180°F. ANKER-TEPPICHBODEN GEBRUDER, 0000107959 ZOLLHAUSSTRASSE 112 DUEREN, 05 DE, 52319 TEL: 2421 804355 FAX: 2421 804309 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: P/N 7610926 ONLY ANODISATION & PEINTURE TNM INC., 0000106737 21 CHEMIN DE L' AVIATION POINTE-CLAIRE, QC CA, H9R 4Z2 TEL: 514 429 7777-36 FAX: 514 429 5108 Class: A SUBCONTRACTORS Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 161-007 APPLICATION OF MIL-L-46010 SOLID FILM LUBRICANT BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY MPS 250-023 PAINTING DETAIL PARTS AEROSPATIALE A330/A340 MPS 250-024 CHROMIC ACID ANODIZING AEROSPATIALE A330/A340 Page 95 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval MPS PPS PPS PPS PPS 250-301 PENETRANT INSPECTION 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS 31.02 CLEANING PROCESSES OF ALUMINUM 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) 34.08 EPOXY PRIME Specification Controlled with Limitations: BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) Limitation: limited to flow only BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Limited to Oven #3 Zone: 6.6'X8.4'X3.6' Temperature 150-250F and Limitation: Oven #2 Zone: 12'' from the floor up to 5'X10'X20' BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: limited to surface preparation only ( masking and application of electrical conductive coating BAPS 160-32 SULFURIC ACID ANODIZING Limitation: Limitation to Grade 1 .Sodium Dicromate Seal..ONLY . BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: CONDUCTIVITY TEST ONLY BAPS 176-04 MAGNETIC PARTICLE INSPECTION Limitation: Wet Horizontal Bench, 100 amps – 3250 amps, 16-in dia. fixed coil 5-turns (285-11), 40" long. MPS 250-201 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES AEROSPATIALE A330/A340 PROGRAM Limitation: Ink marking only. MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 Limitation: Limited to conductivity only ANOPOL LIMITED, 0000131489 70 BRODESLEY ST. BIRMINGHAM, WM GB, B5 5QA TEL: 0121 632 6888 FAX: 0121 632 6888 Class: A SUBCONTRACTORS Specification Controlled: BAPS 160-36 ELECTROLYTIC POLISHING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL Page 96 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval ANTAVIA SA, 0000108083 33 ROUTE DE TOULOUSE DIEUPENTALE, 82 FR, 82170 TEL: 5630 25249 FAX: 563 24 51 26 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: EASA approval FR.145.094 & FAA Repair Station dual approval X2VY223O. APEL LTD, 0000133900 UNIT 3B BROOK PARK, EPSOM AVENUE HANDFOR WILMSLOW, CH GB, SK9 3PW TEL: 0161 485 4431 FAX: 0161 48 4147 Class: C MANUFACTURER APEX COMPOSITES L.L.C., 0000108222 414 CHAMBER LOOP DR. ADA, OK US, 74820-2254 TEL: 580 436 6444 FAX: 580 436 6464 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS APEX ENGINEERING INTL. LLC., 0000107565 1804 W. 2ND ST. WICHITA, KS US, 67203-5703 TEL: 316-977-8151 FAX: 316-262-8659 Class: Specification Controlled: A SUBCONTRACTORS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER E MAINTENANCE ORGANIZATION BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING LES 1004 PENETRANT INSPECTION LES 1006 INSPECTION, MAGNETIC PARTICLE LES 1014 WELDING, FUSION FERROUS METALS LES 1015 WELDING FUSION, ALUMINUM ALLOYS LES 1025 WELDING, SPOT AND SEAM-ALUMINUM AND MAGNESIUM LES 1026 WELDING,SPOT AND SEAM - LOW CARBON STEELS, STAINLESS STEELS, NICKEL ALLOYS LES 1039 SEALING- INTEGRAL FUEL TANKS, PRESSURE CABIN & Specification Controlled: BAPS 186 CHEMICAL MILLING OF ALUMINUM LES 1182 QUALIFICATION OF BONDED ASSEMBLIES Page 97 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval FIREWALL LES 1047 ALLOYS LES 1051 LES 1079 LES 1182 LES 1323 CHEMICAL FILM TREATMENT, APPLICATION OF - ALUMINUM HEAT TREAT OF ALUMINUM ALLOYS EPOXY FINISH, FUEL RESISTANT, APPLICATION OF QUALIFICATION OF BONDED ASSEMBLIES PASSIVATION OF CORROSION RESISTANT STEEL Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to surface preparation only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to manual riveting only. BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: LIMITED TO PART NUMBER CC670-96223-1 (SEE MEMO MC:01/1366) BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation to Type II only BAPS 172-34 FUSION WELDING Limitation: ALUMINUM ALLOY AND CRES STEEL ONLY BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Limitation: : USING OAKITE 34B SOLUTION & DEOXALUME 2300 APEX INDUSTRIES INC., 0000106021 100 MILLENNIUM BLVD. MONCTON, NB CA, E1E 2G8 TEL: 506-857-2724 FAX: 506 857 1639 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-27 INTEGRAL FUEL TANK SEALING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Page 98 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to surface preparation only. BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Safety Tying Method 1: Lock Wire only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: LIMITED TO MANUAL INSTALLATION BAPS 172-34 FUSION WELDING Limitation: Limited to aluminium & corrosion resistant steel APEX TOOL GROUP, LLC, 0000102746 762 W. STEWART ST. DAYTON, OH US, 45417-3971 TEL: 937-222-7871-263 FAX: 937 228 1736 Class: B EQUIPMENT SUPPLIERS API TECHNOLOGIES CORP, 0000116486 8061 AVONIA ROAD FAIRVIEW, PA US, 16415-2829 TEL: 814 474 1571 FAX: 814 474 3110 Class: C MANUFACTURER APLIX FASTENERS INC., 0000110432 4714 CHRISTIE DR. BEAMSVILLE, ON CA, L0R 1B4 TEL: 800 263 4812 FAX: 905 563 1266 Class: D DISTRIBUTOR APLIX FASTENERS INC., 0000108403 12300 STEELE CREEK ROAD CHARLOTTE, NC US, 28273-3738 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM # 560 Page 99 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 704 588 1920 FAX: 704 588 1941 APLIX SA, 0000137728 ZA LES RELANDIERES RN 23 LE CELLIER, 42 FR, 44850 TEL: 514-855-5000 FAX: 514-855-5000 Class: C MANUFACTURER APOLLO AEROSPACE COMPONENTS LIMITED, 0000123097 APOLLO HOUSE, STOURDALE ROAD WARLEY, WM GB, B64 7BG TEL: 0 1384 566666 FAX: 0 1384 562250 Class: D DISTRIBUTOR APPARATEBAU GAUTING GMBH, 0000137025 ZUM WINDKANAL 10 DRESDEN, 14 DE, 01109 TEL: 49 351 88597 0 FAX: 49 351 88597 34 Class: B EQUIPMENT SUPPLIERS APPARATEBAU GAUTING GMBH, 0000130064 FRIEDRICHSHAFENER STRASSE 5 GILCHING, 09 DE, 82205 TEL: 49 8105 2100 FAX: 49 8105 2102215 Class: B EQUIPMENT SUPPLIERS APPEARANCE GROUP INC., 0000111181 9424 E. 37TH ST. N. WICHITA, KS US, 67278 TEL: 800 688 9091 FAX: 316 943 0820 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods APPH AVIATION SERVICES LTD., 0000106245 1 ROKEBY CT. EASTGATE WAY MANOR PARK RUNCORN, CH GB, WA71RW TEL: 441 9285 530 530 FAX: 441 928 579 4 Class: E MAINTENANCE ORGANIZATION APPLIED AERODYNAMICS INC., 2265 VALLEY BRANCH LANE DALLAS, TX Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval EUWR225L & EASA dual 0000116359 Page 100 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification US, 75234-5855 TEL: 972 620 2100-134 FAX: 972 620 6008 APPLIED AEROSPACE STRUCTURES, 0000101060 3437 S. AIRPORT WAY STOCKTON, CA US, 95206-3853 TEL: 209 982 0160 FAX: 209 983 3281 Learjet Approved Suppliers Scope of Approval approval EASA.145.4165 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: LIMITED TO P/N 604-31900 AND 604-31901. Specification Controlled: LES 1039 SEALING- INTEGRAL FUEL TANKS, PRESSURE CABIN & FIREWALL LES 1182 QUALIFICATION OF BONDED ASSEMBLIES LES 1210 SONIC, INSPECTION LES 1227 MANUFACTURE, ALUMINUM HONEYCOMB FLAT PANELS (50,60 SERIES LEARJETS) LES 1247 MANUFACTURE, ALUMINUM HONEYCOMB FLAT PANELS (30,60 SERIES LEARJETS) PPS 20.03 PENETRANT FLAW DETECTION PPS 21.21 GENERAL SEALING PRACTICES PPS 25.52 EC-2216 B/A GREY ADHESIVE PPS 34.08 EPOXY PRIME PPS 36.10 METAL BONDING OF DE HAVILLAND PARTS TO BAC 5555 AND BAC 5514 Specification Controlled with Limitations: LES 1033 ELECTRICAL BONDING Limitation: limited to preparation Methods per SP1 and SP3 only Limitation: Sealing Method per SM1 only APPLIED AVIONICS, INC., 0000101057 3201 SANDY LANE FORT WORTH, TX US, 76112-7203 TEL: 817 451 1141 FAX: 817 654 3405 Class: B EQUIPMENT SUPPLIERS APPLIED SEALS CO,. LTD., 0000134581 NO. 16, KUNG-YEH NORTH 2ND RD. CHANG HUA LU-KANG TOWN, TWN TW, 505 TEL: 886 4 7810288 FAX: 886 4 7810289 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited for the manufacture of SOCD Seal Part nmuber 1005520906. Page 101 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval APPLIKATORS PLUS INC., 0000108273 5677 STATE HWY. 276 ROYSE CITY, TX US, 75189-5745 TEL: 214 771 0606 FAX: 214 771 0561 Class: J LOGISTIC PROVIDER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Treatment of fabric; Testing to be performed by recognized regulatory authorities APPLUS AEROSPACE UK LIMITED, 0000136886 INSPECTION HOUSE 61, ALBERT ROAD NORHT REIGATE, SY GB, RH2 9RS TEL: 999-999-9999 FAX: 999-999-9999 Class: A SUBCONTRACTORS Specification Controlled: BAPS 176-17 RADIOGRAPHIC INSPECTION PSPEC 305 RADIOGRAPHIC EXAMINATION APPLUS AEROSPACE UK LIMITED, 0000122712 UNIT 18, DAWKINS ROAD POOLE, DO GB, BH15 4JY TEL: 0173 7222211 FAX: 0173 7234228 Class: A SUBCONTRACTORS Specification Controlled: BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-17 RADIOGRAPHIC INSPECTION PSPEC 305 RADIOGRAPHIC EXAMINATION APPLUS RTD CANADA, 0000107891 71 PROCTOR ROAD SCHOMBERG, ON CA, L0G 1T0 TEL: 416 324 3241 FAX: 905 847 1636 Class: A SUBCONTRACTORS Specification Controlled: BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION APS MATERIALS INC., 0000126385 4011 RIVERSIDE DR. DAYTON, OH US, 45405 TEL: 937 278 6547 FAX: 937 278 4352 Class: A SUBCONTRACTORS Specification Controlled: PSPEC 429 PLASMA FLAME DEPOSITION AQUACOUPE TECHNOLOGIE, 0000106742 12000 RUE DE L'AVENIR MIRABEL, QC CA, J7J 2J1 TEL: 450 434 2432 FAX: 450 434 2434 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 AR MONTEITH INC., 0000106743 2615 WHARTON GLEN AVE. Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 102 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification MISSISSAUGA, ON CA, L4X 2B1 TEL: 905 270 0311 FAX: 905 290 6650 Scope of Approval Limitation: P/N P-100, 202-13,-14,-15,-18,-46, FILTERAY TYPE B, AND T-1102. ARBORITE, 0000118837 385 LAFLEUR LASALLE, QC CA, H8R 3H7 TEL: 514 366 2710 FAX: 514 366 2609 Class: H COMMERCIAL OFF THE SHELF ARCELOR MITTAL PLATE LLC, 0000108485 139 MODENA ROAD COATESVILLE, PA US, 19320-4036 TEL: 610 383 2000 FAX: 610 383 3175 Class: C MANUFACTURER ARCELOR MITTAL SAINT-PATRICK, 0000133719 5900 RUE SAINT-PATRICK MONTREAL, QC CA, H4E 1B3 TEL: 514 762 5260 FAX: 514 762 5388 Class: C MANUFACTURER ARCONIC FASTENING SYSTEMS AND RINGS, 3000-3020 W. LOMITA BLVD. TORRANCE, CA US, 90505-5103 TEL: 310 530 2220 FAX: 310 784 4320 Class: C MANUFACTURER 0000103526 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Systems with Limitations: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT ARCONIC FIXATION SIMMONDS SAS, 0000107907 9 RUE DES CRESSONNIERES ST-COSME-EN-VARAIS, 72 FR, 72110 TEL: 02 43 31 41 00 FAX: 901133243331802 Class: C MANUFACTURER ARCONIC GLOBAL FASTENERS & RINGS IN, 800 S. STATE COLLEGE BLVD. FULLERTON, CA US, 92831-5334 TEL: 714 871 1550 FAX: 310 220 6680 Class: A SUBCONTRACTORS C MANUFACTURER 0000107129 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 103 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval AREMAC HEAT TREATING INC., 0000106746 330 9TH AVE. CITY OF INDUSTRY, CA US, 91746-3311 TEL: 626 333 3898-205 FAX: 626 369 2932 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 168-14 HEAT TREATMENT OF STEELS BAPS 168-15 STRESS RELIEF OF METALS BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS BAPS 180-001 ALKALINE CLEANING ARGON ST INC., 0000117492 90 LAUREL VIEW DR. SMITHFIELD, PA US, 15478-1643 TEL: 724 564 4100 FAX: 724 564 4180 Class: A SUBCONTRACTORS Specification Controlled: BAPS 145-004 INSTALLATION OF MECHANICALLY BAPS 145-006 TERMINATION OF THE SHIELD ON WIRE AND CABLE BAPS 145-008 STOWAGE OF ELECTRICAL WIRING BAPS 172-12 TINNING AND SOLDERING MPS 145-25 CERTIFICATION OF CRIMPING TOOL ATTACHED TERMINALS SHIELD ON SHIELDED AND CONNECTORS OPERATORS Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Limited to touch-up on rivets only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Limited to touch up on rviets only BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: a) Supplier is not performing electrical bonding on physical aircraft. Limitation: b) Supplier is not working with composites. Limitation: c) Supplier is not performing works on fuel tank. Limitation: d) Supplier is not performing Chemical Conversion Treatment of Magnesium. BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING Limitation: a) Supplier is not performing installation of aircraft wiring in physical aircraft. BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Limited to locking wire only BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT Limitation: limited for electrical bundle installation only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR Page 104 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval ALUMINIUM ALLOYS Limitation: a) Limited to type II only. Limitation: b) Limited to parts or parts areas that shall be primed. ARGUS INDUSTRIES, 0000106749 20 MURRAY PARK ROAD WINNIPEG, MB CA, R3J 3T9 TEL: 204 837 4660 FAX: 204 896 4250 Class: A SUBCONTRACTORS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM ARINC DIRECT LLC., 0000131756 2551 RIVA ROAD ANNAPOLIS, MD US, 21401 TEL: 410 266 4000 FAX: 1 450 834 3028 Class: H COMMERCIAL OFF THE SHELF ARIZONA SEALING DEVICES INC., 0000102009 150 ALAMO DR. E., SUITE 4 CHANDLER, AZ US, 85225-1207 TEL: 480-892-5864 FAX: 480-892-7388 Class: C MANUFACTURER ARLINGTON INTERNATIONAL AVIATION, 0000106397 7321 COMMERCIAL BLVD. E. ARLINGTON, TX US, 76001 TEL: 817 465 9880 FAX: 817-465-9993 Class: D DISTRIBUTOR ARMACELL LLC., 0000128320 100 LOCUST AVE. SPENCER, WV US, 25276 TEL: 800-638-6312 FAX: 304-927-5731 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to Monarch- F-06931 ARMACELL LLC., 0000118471 1004 KEISLER ROAD CONOVER, NC US, 28613-9342 TEL: 828 464 5880 FAX: 828 464 5888 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM -001 code 993 - Armacell products Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 105 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval ARMEL ELECTRONICS INC., 0000107702 1601 75TH ST. NORTH BERGEN, NJ US, 07047-4046 TEL: 201 869 4300 FAX: 201 869 4304 Class: C MANUFACTURER ARMITE LABS., 0000102408 1560 SUPERIOR AVE. COSTA MESA, CA US, 92627-3676 TEL: 949 646 8319 FAX: 213 587 5075 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM ARNPRIOR AEROSPACE INC., 0000129851 8901 Y AVENIDA CENTRAL CHIHUAHUA, CHI MX, 31000 TEL: 614 238 5002 FAX: 999 999 9999 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 180-001 ALKALINE CLEANING BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: Limited for aluminum alloys BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: Limited to: Limitation: -Natural Aging of Aluminium sheet 0.040-0.080 inch thick, MRS & NON-MRS Quality Limitation: -Artificial Aging of Aluminium 0.032-0.080 inch thick sheet, MRS & NON-MRS Quality Limitation: -Solution Heat Treatment @850°F to 1000°F in Oven M1 (Class 10 Type A) Limitation: -Aging Heat Treatment @ 200°F to 400°F in Ovens M2 & M3 (Class 10 Type A) BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Limitation: Limited to: Limitation: Type 1 (Fluorescent dye), Method A (Water Page 106 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Washable), Level 3 (high), Form A (Dry Powder Limitation: Developer) Limitation: system. Limitation: (In addition, non-aqueous developer is used for Tam Panel maintenance and can be used Limitation: for evaluating questionable indications.) ARNPRIOR AEROSPACE INC., 0000127373 107 BASKIN DR. E. ARNPRIOR, ON CA, K7S 3M1 TEL: 613-623-1800-... FAX: 613 623 9444 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 185-01 BARREL AND VIBRATORY FINISHING CAPTIVE LABORATORY PPS 20.08 HARDNESS TESTING Specification Controlled with Limitations: Page 107 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to surface preparation only ARNPRIOR AEROSPACE MONTREAL INC., 0000106778 4861 CHEMIN DE LA SAVANE ST-HUBERT, QC CA, J3Y 9G1 TEL: 450 443 6333-... FAX: 450 443 4921 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 180-001 ALKALINE CLEANING PPS 01.02 FORMING ALUMINUM ALLOYS PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS PPS 21.21 GENERAL SEALING PRACTICES PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PPS 34.41 APPLICATION OF EPOXY-POLYAMIDE ENAMEL (F22) Specification Controlled with Limitations: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: LIMITED TO COTTER PIN BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: LIMITED TO FLOOR SUPPORT STRUCTURE ONLY. SEALING OF PRESSURE BOUNDARIES NOT PERMITTED. BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN ARRAY CONNECTOR INC., 0000103074 12400 8 S.W. 134TH COURT MIAMI, FL US, 33186-6499 TEL: 305 234 1000 FAX: 305 234 6601 Class: B EQUIPMENT SUPPLIERS Page 108 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification ARROW ELECTRONICS INC., 0000121018 1955 E. SKY HARBOR CIR. N. PHOENIX, AZ US, 85034-3441 TEL: 602-687-4685 FAX: 602 495 1616 Class: C MANUFACTURER D DISTRIBUTOR ARROW ELECTRONICS INC., 0000101466 BLVD LUIS DONALDO COLOSIO#1179 NOGALES, SON MX, 84048 TEL: 913 752 2502 FAX: 631 311 4959 Class: C MANUFACTURER D DISTRIBUTOR ARROW ELECTRONICS INC., 0000116600 665 MAESTRO DR. RENO CITY, NV US, 89511-3282 TEL: 775 334 2800 FAX: 775 334 2899 Class: D DISTRIBUTOR ARROW LAB, INC., 0000100816 1333 N. MAIN ST. WICHITA, KS US, 67203-3436 TEL: 316 267 2893 FAX: 316 267 0171 Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS INDEPENDANT LABORATORY Specification Controlled with Limitations: PPS 01.08 MAGNETIC PULSE FORMING OF END FITTINGS TO TUBES Limitation: Limited to Tension Testing Only. Page 109 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval ARROWHEAD PRODUCTS CORP., 0000102524 4411 KATELLA AVE. LOS ALAMITOS, CA US, 90720-3514 TEL: 714-822-2509 FAX: 714 220 6488 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval OHTR662X & EASA dual approval EASA.145.5694. ARROWSMITH ENGINEERING, 0000120903 50 BAYTON ROAD COVENTRY, WM GB, CV7 9EJ TEL: 2476 36 1773 FAX: 2476 36 8126 Class: A SUBCONTRACTORS ARVAN INC., 0000106751 14083 S. NORMANDIE AVE. GARDENA, CA US, 90249-2614 TEL: 310 327 1818 FAX: 310 324 6634 Class: C MANUFACTURER ASAHI KINZOKU KOGYO CO. LTD., 0000106753 45 OSADA-CHO KISSYOIN MINAMI-KU, 26 JP, 6018362 TEL: 011 81 75 672... FAX: 011 81 75 672 Class: A SUBCONTRACTORS Specification Controlled: BAPS 160-28 CHROMIUM PLATING OF STEELS HEAT TREATED TO ABOVE 220 KSI BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 185-02 SHOT PEENING OF METAL PARTS CAPTIVE LABORATORY MPS 160-27 CADMIUM PLATING OF CARBON AND LOW ALLOY HEAT TREATED TO 220-240 KSI AND ABOVE Specification Controlled with Limitations: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. Limitation: LIMITED TO CHEMICAL SOLUTION ANALYSIS & METALLURGICAL TEST RELATED TO Limitation: PLATING OF METALS. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION Limitation: LIMITED TO CHEMICAL SOLUTION ANALYSIS & Page 110 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval METALLURGICAL TEST RELATED TO Limitation: PLATING OF METALS. ASAHI KINZOKU KOGYO CO. LTD., 0000106752 4851-4 MAKI ANPACHI-CHO ANPACHI-GUN, 21 JP, 5030199 TEL: 011 81 58 464... FAX: 011 81 58 464 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-5A CORROSION TESTING BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-28 CHROMIUM PLATING OF STEELS HEAT TREATED TO ABOVE 220 KSI BAPS 160-32 SULFURIC ACID ANODIZING BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 185-02 SHOT PEENING OF METAL PARTS BAPS 194-03 APPLICATION OF THERMAL SPRAY COATINGS CAPTIVE LABORATORY MPS 160-08 CADMIUM PLATING OF CARBON AND LOW ALLOY STEELS Page 111 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BELOW 220,000PSI, COPPER ALLOYS AND CRES STEELS PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 34.08 EPOXY PRIME Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Oven ID and Maximum Temperature set point Limitation: 8002A..............158°F ( 70°C ) Limitation: 8002B..............180°F ( 82°C ) Limitation: AS-0631-1..........176°F ( 80°C ) Limitation: AS-0629-1..........176°F ( 80°C ) Limitation: AS-0538.............158°F ( 70°C ) Limitation: 8505................176°F (80°C ) BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to manual installation only. BAPS 160-23 HARD ANODIZING OF ALUMINUM ALLOYS Limitation: Limited to Class A, Type I BAPS 160-26 ELECTROLESS NICKEL PLATING Limitation: Limited to Class 2A only. ASC INTERNATIONAL INC., 0000100881 1225 CORPORATE DR. W. ARLINGTON, TX US, 76006-6103 TEL: 817 640 1300 FAX: 817 649 2685 Class: D DISTRIBUTOR ASCO AEROSPACE CANADA LTD., 0000106965 8510 RIVER ROAD DELTA, BC CA, V4G 1B5 TEL: 604 946 4900-234 FAX: 604 946 4671 Class: A SUBCONTRACTORS C MANUFACTURER ASCO DEUTSCHLAND GMBH, 0000119303 HOLGER KISSEL, OTTO-MULLER STR.55 Class: A SUBCONTRACTORS Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Specification Controlled with Limitations: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Limited to cotter pin and lock wahser installation only PPS 20.07 CONDUCTIVITY TESTING Limitation: MACHINE A/C PARTS PPS 20.08 HARDNESS TESTING Limitation: MACHINE A/C PARTS Specification Controlled: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Page 112 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification GEDERN, 06 DE, 63688 TEL: 6045 96120 FAX: 60445 961220 ASCO INDUSTRIES NV/S.A., 0000106754 WEIVELDLAAN 2 ZAVENTEM, 02 BE, 1930 TEL: 32 473 75 40 48 FAX: 32 2716 0779* Scope of Approval BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING Class: F STRUCTURAL SUPPLIER Systems with Limitations: 2101 MRB APPROVAL - MINOR ONLY Limitation: C Series Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-06 PHOSPHATE TREATMENT BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT BAPS 168-15 STRESS RELIEF OF METALS BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 175-007 INSTALLATION OF THREADED RETAINER BEARINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 176-14 NITAL ETCH INSPECTION OF STEEL PARTS BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL Page 113 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Specification Controlled with Limitations: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Limitation: Limited to Method 1 BAPS 160-10 CHROMIC ACID ANODIZING Limitation: Limited to 7000 series materials only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type II Only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation: limited to type II only BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS Limitation: TANK 1.7 LIMITED TO TITANIUM ASCO VALVE INC., 0000104645 50-60 HANOVER ROAD FLORHAM PARK, NJ US, 07932-1503 TEL: 973 966 2000 FAX: 866-847-2726 Class: B EQUIPMENT SUPPLIERS ASH & LACY PERFORATORS LTD, 0000134878 ALMA STREET SMETHWICK, WM GB, B66 2RL TEL: 44 121 558 8921 FAX: 999 999 9999 Class: A SUBCONTRACTORS ASMP ALUMINIUM SILICON MILL, 0000120010 BAARERSTRASSE 20 ZUG, ZG CH, 6300 TEL: 41 726 12 12 FAX: 41 726 12 13 Class: D DISTRIBUTOR ASPAC OIL CO. LTD, 0000134663 43 WHASA 1 GIL ONSAN-EUP, 13 KR, 689-896 TEL: 82 52 239 22161 FAX: 82 52 239 2171 Class: C MANUFACTURER Page 114 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address ASSEMBLY TECHNOLOGIES INTERNATIONAL, 1177 WEST MAPLE ROAD CLAWSON, MI US, 48017-1059 TEL: 800 550 2510 FAX: 248 280 2810 Classification 0000131502 Class: C MANUFACTURER ASSOCIATED INDUSTRIES INC., 0000100817 225 WABASH WICHITA, KS US, 67214-3945 TEL: 316 264 6311 FAX: 316 264 7020 Class: D DISTRIBUTOR ASSOCIATED SPRING BARNES GROUP, 0000116996 434 W. EDGERTON AVE. MILWAUKEE, WI US, 53207-6027 TEL: 414 482 1600-756 FAX: 414 747 1088 Class: C MANUFACTURER ASSOCIATED SPRING RAYMOND, 0000101126 370 W. DUSSEL DR., SUITE A MAUMEE, OH US, 43537 TEL: 419 891 9292-... FAX: 419 891 9192 Class: C MANUFACTURER ASSOCIATED SPRING SPEC, 0000117703 UNIT 4 GROSVENOR BUSINESS CENTRE, VALE P EVESHAM, WC GB, WR11 1GS TEL: 01386 443366 FAX: 01386 446669 Class: C MANUFACTURER ASTECH ENGINEERED PRODUCTS INC., 0000117693 3030 RED HILL AVE. SANTA ANA, CA US, 92705-5823 TEL: 949-250-1000-140 FAX: 949 250 4982 Class: A SUBCONTRACTORS ASTK AEROSPACE TECHNOLOGY OF KOREA, 0000127845 2365 GONGDAN 1 RO, SANAM-MYUN, GYEONGNAM SACHEON-CITY, 11 KR, 664-942 Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to solder wick product 484- ( ) - EMCM code no 559 Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Page 115 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limited to non Intrusive Method only BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: Artificial aging of Aluminum Lithium alloy Limitation: Air Furnace #8072 Class 5 Type A, artificial aging treatment between 215 and 380 °F TEL: 55 851 7050 FAX: 55 851 7019 ASTONICS INC, 0000137052 815 N. 2150 WEST CIRCLE CEDAR CITY, UT US, 84721 TEL: 435-586-0902 FAX: 435-586-0903 Class: D DISTRIBUTOR ASTREX ELECTRONICS, INC., 0000101850 205 EXPRESS ST. PLAINVIEW, NY US, 11803-2420 TEL: 516 653 2246 FAX: 516 433 1796 Class: C MANUFACTURER D DISTRIBUTOR ASTRO ALUMINIUM TREATING, 0000110356 11040 PALMER AVE. SOUTH GATE, CA US, 90280-7408 TEL: 562 923 4344 FAX: 562 923 9536 Class: A SUBCONTRACTORS ASTRO-MED, INC., 0000134209 600 EAST GREENWICH AVENUE WEST WARWICK, RI US, 02893 TEL: 401 828 4000 FAX: 401 822 2430 Class: C MANUFACTURER Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS MPS 250-341 HEAT TREATMENT OF ALUMINUM PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS PSPEC 401 HEAT TREATMENT OF ALUMINIUM AND ALUMINIUM ALLOYS Page 116 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval ASTROLITE ALLOY, 0000124342 401 N. RICE AVE. OXNARD, CA US, 93030 TEL: 800-235-5935 FAX: 805-487-9694 Class: C MANUFACTURER ASTRONICS - AES, 0000101096 12950 WILLOWS ROAD N. E. KIRKLAND, WA US, 98034 TEL: 425 376 4455 FAX: 425 702 4930 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval AH4R050M & EASA dual approval EASA.145.4787. ASTROSEAL PRODUCTS MFG. CORP., 0000106417 85 WINTHROP ROAD, #5 AIRPORT INDUST CHESTER, CT US, 06412 TEL: 860 526 8605 FAX: 999 999 9999 Class: C MANUFACTURER ATELIERS BIGATA SAS, 0000108138 10 RUE JEAN-BAPTISTE-PERRIN EYSINES, 33 FR, 33320 TEL: 5562 86170 FAX: 5562 86121 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: EASA approval FR.145.238 & FAA Repair Station dual approval B1GY360N. ATELIERS DE LA HAUTE-GARONNE, 0000106760 ZI DE FLOURENS - 26 ROUTE DE LASBORDES FLOURENS, 31 FR, 31131 TEL: 514-515-8329 FAX: 5618 39505 Class: C MANUFACTURER ATI FLAT ROLLED PRODUCTS, 0000132113 1357 E RODNEY FRENCH BLVD NEW BEDFORD, MA US, 02742 TEL: 724 226 5344 FAX: 999 999 9999 Class: C MANUFACTURER ATI FLAT ROLLED PRODUCTS, 130 LINCOLN AVE. VANDERGRIFT, PA US, 15690-1249 Class: C MANUFACTURER 0000108969 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to P/N ''AL028CX'' and EMCM material vendor #1140 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM #854 including material covered by Open Bid code 320 & 721 Page 117 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 724 568 5224 FAX: 724 568 5224 ATI FLAT ROLLED PRODUCTS, 0000111008 500 GREEN ST. WASHINGTON, PA US, 15301-2335 TEL: 724 226 5344 FAX: 999 999 9999 Class: C MANUFACTURER ATI FLAT ROLLED PRODUCTS, 0000111007 100 RIVER ROAD BRACKENRIDGE, PA US, 15014-1537 TEL: 724 224 1000 FAX: 999 999 9999 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: refer to EMCM no .23 . No limitation to Lear Program ( Legacy program only) ATI FLAT ROLLED PRODUCTS, 0000119473 1500 W. MAIN LOUISVILLE, OH US, 44641-2325 TEL: 724 226 5344 FAX: 724 773 2591 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to p/n: N221-9020 Titanium Sheet ( AMS4902 ) for Learjet Programs ONLY. Limitation: limited to p/n: N221-9020 Titanium Sheet ( AMS4902 ) for Learjet Programs ONLY. Limitation: Limited to : P/N 2615269-23 Limitation: Material: 301 CRES Sht 1/4 Hard Limitation: Material Spec: AMS5517 Limitation: limited to p/n: N221-9020 Titanium Sheet ( AMS4902 ) for Learjet Programs ONLY. Limitation: Limited to : P/N 2615269-23 Limitation: Material: 301 CRES Sht 1/4 Hard Limitation: Material Spec: AMS5517 Limitation: Limitation to AMS 4901 and AMS 4902 for sheet and strip up to .1874 inch thick for all other Limitation: BA Programs Limitation: limited to p/n: N221-9020 Titanium Sheet ( AMS4902 ) for Learjet Programs ONLY. Limitation: Limited to : P/N 2615269-23 Limitation: Material: 301 CRES Sht 1/4 Hard Limitation: Material Spec: AMS5517 Limitation: Limitation to AMS 4901 and AMS 4902 for sheet and strip up to .1874 inch thick for all other Limitation: BA Programs Limitation: EMCM-001 no .1000 Page 118 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval ATI SPECIALITY MATERIALS, 0000108395 4374 LANCASTER HWY. RICHBURG, SC US, 29729-9060 TEL: 803 789 3595 FAX: 803 789 3962 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM ATI SPECIALTY METALS, 0000107455 2020 ASHCRAFT AVE. MONROE, NC US, 28110-3720 TEL: 704 289 4511 FAX: 704 283 1251 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM # 518 ATI WAH CHANG, 0000108905 1600 OLD SALEM ROAD N. E. ALBANY, OR US, 97321-4548 TEL: 541 926 4211- FAX: 541 967 6990 Class: C MANUFACTURER ATI WAH CHANNG, 0000108497 530 34TH AVE. S.W. ALBANY, OR US, 97322-3828 TEL: 541 967 9000 FAX: 541 812 7456 Class: C MANUFACTURER ATI ZKM FORGING SP. ZO. O, 0000131655 UL. W. GRABSKIIEGO 54 STALOWA, 17 PL, 37-450 TEL: 48158134516 FAX: 48158134516 Class: C MANUFACTURER ATKINS & PEARCE, 0000108625 ONE BRAID WAY COVINGTON, KY US, 41017 TEL: 877 502 3344 FAX: 859 356 4280 Class: C MANUFACTURER ATLANTIC AERO SUPPORT INC., 2 HINCKLEY ROAD HYANNIS, MA Class: E MAINTENANCE ORGANIZATION 0000115620 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 119 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval US, 02601 TEL: 508 775 6400 FAX: 508 790 4332 ATLANTIC PRECISION ENGINEERING, 0000109898 ARAGON ROADBLACKBUSH BUSINESS PARK YATELEY CAMBERLEY, SY GB, GU46 6ET TEL: 01252 870225 FAX: 01252 871028 Class: A SUBCONTRACTORS ATLANTIC THREAD & SUPPLY CO., 0000108198 8515 KELSO DR. BALTIMORE, MD US, 21221-3145 TEL: 800 287 4624 FAX: 888 473 8008 Class: C MANUFACTURER ATLAS AERONAUTIK INC., 0000106693 420 EDOUARD GRANBY, QC CA, J2G 3Z3 TEL: 450-378-8107-... FAX: 450 378 1041 Class: A SUBCONTRACTORS Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual riveting only BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT Limitation: Limited to Faying Surface of Anchor Nuts & Wet Installation of Fasteners only. Specification Controlled: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: LIMITED TO RIVET HEAD TOUCH UP (IN HOUSE ASSEMBLIES ONLY) BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: MANUAL INSTALLATION ONLY BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: INSTALLATION OF RIVETS ON P/N 600-91236-1 ONLY BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: LIMITED FOR COOLING MEDIA ONLY BAPS 185-000 GRINDING OF STEEL PARTS Limitation: steel heat treated under than 220-240 ksi ATLAS FIBRE COMPANY, 3721 W. CHASE AVE. SKOKIE, IL US, 60076-4008 0000136766 Class: C MANUFACTURER Page 120 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 847 674 1234 FAX: 847 674 1723 ATLAS SPECIALTY PRODUCTS, 0000106763 2299 WINSTON ROAD E. ANAHEIM, CA US, 92806-5538 TEL: 714 999 5400 FAX: 714 999 5404 Class: C MANUFACTURER ATTAX ASSEMBLY SYSTEMS, 0000134867 6 RUE DES ENTREPRENEURS CARRIERES-SUR-SEINE, 93 FR, 78420 TEL: 331 61 04 50 50 FAX: 331 61 04 05 0 Class: B EQUIPMENT SUPPLIERS ATTEWELL LTD., 0000107979 7A/B MILLINGTON ROAD HAYES, LO GB, UB3 4AZ TEL: 208 571 0055-200 FAX: 208 571 7139 Class: A SUBCONTRACTORS C MANUFACTURER AUBERT & DUVAL, 0000127662 USINE DES ANCIZES LES ANCIZES COMPS, 63 FR, 63770 TEL: 04 73 67 31 28 FAX: 999 999 9999 Class: C MANUFACTURER AUBERT & DUVAL, 0000127525 75 BLVD. DE LA LIBERATION PAMIERS, 09 FR, 09102 TEL: 534 012238 FAX: 999 999 9999 Class: C MANUFACTURER AURORA BEARING CO., 0000106765 901 AUCUTT ROAD MONTGOMERY, IL US, 60538-1338 TEL: 630 859 2030-... FAX: 630 859 0971 Class: C MANUFACTURER AURORA TECHNOLOGIES, 19 INDUSTRIAL DR. PACIFIC, MO Class: C MANUFACTURER 0000108755 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 121 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 63069-3626 TEL: 636 257 8913 FAX: 636 257 0531 AUTO-AIR COLORS, 0000137591 14 AIRPORT PARK RD EAST GRANBY, CT US, 06026 TEL: 800-243-2712 FAX: 860-653-0643 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS AUTO-VALVE INC., 0000100818 1707 GUENTHER ROAD DAYTON, OH US, 45417-9344 TEL: 937 854 3037-... FAX: 937 854 3039 Class: B EQUIPMENT SUPPLIERS AUTOMATIC MACHINE PRODUCTS, 0000134216 400 CONSTITUTION DRIVE TAUTON, MA US, 02780 TEL: 508 822 4226 ... FAX: 508 822 4476 Class: C MANUFACTURER AUTOMATIC SCREW MACHINE PRODUCTS CO, 709 2ND AVE. DECATUR, AL US, 35601-2517 TEL: 800 237 1097 FAX: 256 355 3612 Class: C MANUFACTURER 0000106766 AUTOMATION PRODUCTS GROUP INC., 0000101403 1025 WEST 1700 N. LOGAN, UT US, 84321-1713 TEL: 435 753 7300 FAX: 435 753 7490 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER AUTOPLAST SPOL. SR. O., 0000116603 NEMANICKA 1798 CESKE BUDEJOVICE, 01 CZ, 370 10 TEL: 420 38 722 5050 FAX: 420 38 722 158 Class: A SUBCONTRACTORS AUXITROL S.A., 0000107980 5 ALLEE CHARLES-PATHE Class: C MANUFACTURER Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Page 122 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BOURGES, 18 FR, 18941 TEL: 2486 67878 FAX: 2486 67877 AVCORP INDUSTRIES INC., 0000106768 10025 RIVER WAY DELTA, BC CA, V4G 1M7 TEL: 604-582-6677-... FAX: 604 582 2511 Class: F STRUCTURAL SUPPLIER Systems with Limitations: 2101 MRB APPROVAL - MINOR ONLY Limitation: Auxiliary Fuel Tanks & Horizontal Stabilizers of the CL605 Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4C TESTING OF THERMAL PROPERTIES (EXPANSIONS, TMA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 136-120 POLISHING OF ALUMINUM ALLOY SKIN BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-10 CHROMIC ACID ANODIZING Page 123 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-36 ELECTROLYTIC POLISHING BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 174-09 INSTALLATION OF WIGGINS TYPE COUPLINGS ON RIGID PLUMBING LINES BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 185-01 BARREL AND VIBRATORY FINISHING BAPS 185-02 SHOT PEENING OF METAL PARTS BAPS 188-02 COLD WORKING OF HOLES CAPTIVE LABORATORY PPS 10.21 CERTIFICATION OF AUTOCLAVES PPS 10.22 PREPARATION OF MOLDS PPS 10.28 ASSEMBLY OF WIRE THERMOCOUPLES PPS 10.51 CERTIFICATION OF OVENS PPS 36.10 METAL BONDING OF DE HAVILLAND PARTS TO BAC 5555 AND BAC 5514 Specification Controlled with Limitations: BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING Limitation: Limited to the wiring installations required for the FWD Bransonl tank (80011-203) and Limitation: the routing of and installation of wire harnesses on the CH605 & CH850 Horizontal Limitation: Stabilizer. BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: limited to method 2 Page 124 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval AVGROUP INC., 0000119429 3453 PIERCE DR. N. E. ATLANTA, GA US, 30341-2443 TEL: 770 454 7500 FAX: 678 530 9327 Class: Systems with Limitations: D DISTRIBUTOR 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval GT4R218M & EASA dual approval EASA.145.4187. AVIA TECHNIQUE LTD, 0000136134 UNIT 1, 3 & 4 FISHPONDS ESTATE, FISHPOND WOKINGHAM, BK GB, RG41 2QJ TEL: 44 0 118 978 ... FAX: 514 855 5000 Class: E MAINTENANCE ORGANIZATION AVIACOMP S.A.S., 0000128162 14 RUE MARIUS TERCE TOULOUSE, 65 FR, 31300 TEL: 5 67 04 29 04 FAX: 999 99 99 99 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS AVIALL BATTERY-NJ, 2 CRANBERRY ROAD PARSIPPANY, NJ US, 07054-1053 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval RD4D488M & EASA dual approval EASA.145.4195. 0000116360 Specification Controlled with Limitations: BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4C TESTING OF THERMAL PROPERTIES (EXPANSIONS, TMA, ETC.) BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-27 INTEGRAL FUEL TANK SEALING Limitation: Limitation to part numbers C01352261-001, C01623361-003, C01623401-003, C011623421-003, C01623441-003, C01623461-003, C01623481-003, C01623551-003 & C01 BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Limitaion for part numbers C01352261-001, C01623361-003, C01623401-003, C01623421-003, C01623441-001, C01623461-003, C01623481-003, C01623551-003 & C016 BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES Limitation: Limited to Countersinking of holes only. Page 125 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 973-257-9240 FAX: 973-257-8709 AVIALL CANADA LTD., 0000107706 1840 ALSTEP DR., UNIT 5 MISSISSAUGA, ON CA, L5S 1W1 TEL: 905 676 1695 FAX: 905 676 9046 Class: D DISTRIBUTOR AVIALL CANADA LTD., 0000108517 12845 RUE BRAULT MIRABEL, QC CA, J7J 0C4 TEL: 450 437 3844 FAX: 450 437 3997 Class: D DISTRIBUTOR AVIALL INC., 0000101195 2340 W. BROADWAY Rd., Ste. 101 MESA, AZ US, 85202 TEL: 480 668 1551 FAX: 480-668-5654 Class: D DISTRIBUTOR AVIALL SERVICES INC., 0000101176 1312 ADAMS ST. KANSAS CITY, KS US, 66103-1321 TEL: 913 371 5222 FAX: 913 371 5292 Class: D DISTRIBUTOR AVIALL SERVICES, INC, 0000104761 2750 REGENT BLVD. DALLAS, TX US, 75261-9048 TEL: 450 437 3844 FAX: 450 437 3997 Class: C MANUFACTURER E MAINTENANCE ORGANIZATION AVIANOR INC., 0000106777 12405 SERVICE ROAD A-2 MIRABEL, QC CA, J7N 1E4 TEL: 4509769075-236 FAX: 450 476 9292 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION AVIATECHNIK CORPORATION, 325 BRUNEL ROAD MISSISSAUGA, ON Class: E MAINTENANCE ORGANIZATION 0000133848 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Canadian AMO approval 349-91 & EASA dual approval EASA.145.7046. Page 126 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval CA, L4Z 1Z5 TEL: 905 890 7778 FAX: 905 890 0774 AVIATION COMMUNICATION &, 0000105962 19810 7TH AVE. N. PHOENIX, AZ US, 85027-4741 TEL: 623 445 7030 FAX: 623 445 7002 Class: B EQUIPMENT SUPPLIERS AVIATION DEVICES & ELECTRONIC, 0000120648 3215 W. LOOP 820 S FORT WORTH, TX US, 76116 TEL: 817 738 9161 FAX: 817 738 9163 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Av-Dec LLC, class B Equipment supplier working to Bombardier PCD drawings. Limitation: Av-Dec LLC, class B Equipment supplier working to Bombardier PCD drawings. Limitation: ref. EMCM supplier #1081 AVIATION EQUIPMENT PROCESSING, 0000107268 1571 MAC ARTHUR BLVD. COSTA MESA, CA US, 92626-1407 TEL: 714 549 0202 FAX: 714 549 8344 Class: A SUBCONTRACTORS Specification Controlled: PPS 02.64 INSTALLATION OF POTTING TYPE SANDWICH PANEL FASTENERS PPS 25.52 EC-2216 B/A GREY ADHESIVE PPS 34.08 EPOXY PRIME PPS 36.07 METAL TO METAL & METAL TO METAL HONEYCOMB HIGH STRENGTH BONDING USING DHMS A6.03 ADHESIVE FILM &PRIM PPS 36.10 METAL BONDING OF DE HAVILLAND PARTS TO BAC 5555 AND BAC 5514 Specification Controlled with Limitations: PPS 10.35 FABRICATION OF 250 F CURE, EPOXY RESIN PRE-IMPREGNATED, FIBRE REINFORCED COMPOSITE PARTS Limitation: LIMITED TO EDGE FILLING ONLY AVIATION FABRICATORS, 0000116362 805 4TH ST. N. CLINTON, MO US, 64735-1503 TEL: 660 885 8317 FAX: 660 885 3743 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval GVRR304K & EASA dual approval EASA 145.5546. AVIATION GLASS & TECHNOLOGY, APPELSEWEG 13 Class: B EQUIPMENT SUPPLIERS 0000135324 Page 127 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval VOORTHUIZEN, 04 NL, 3781 MD TEL: 31 0 342 472083 FAX: SALESAVIATIONG AVIATION LABS. INC., 0000101305 5401 MITCHELLDALE, SUITE B6 HOUSTON, TX US, 77092-7227 TEL: 713 864 6677 FAX: 713 864 6990 Class: H COMMERCIAL OFF THE SHELF AVIATION REPRESENTATIVES INC., 0000120538 6245 DANVILLE ROAD MISSISSAUGA, ON CA, L5T 2H7 TEL: 905 790 0244 FAX: 905 790 3957 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS AVIATION WORLD WIDE WINGS INC., 0000108820 166 CHEMIN DU MOULIN, ST-JEAN ILE D'ORLEANS, QC CA, G0A 3W0 TEL: 418 829 2847 FAX: 418 829 2847 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Canadian AMO approval 42-01 & EASA dual approval EASA.145.7188. AVIATUBE SAS, 0000119454 15 RUE DE GRANDE BRETAGNE CARQUEFOU, 44 FR, 44470 TEL: 0240184700 FAX: 0240184755 Class: C MANUFACTURER AVIBANK MFG. INC., 0000100989 11500 SHERMAN WAY N. HOLLYWOOD, CA US, 91605-5827 TEL: 818-392-2164 FAX: 775 786 1992 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER AVIC SAC COMMERCIAL AIRCRAFT CO. LT, 0000124765 No.1 SHIJI ROAD, HUNNAN NEW DISTRICT SHENYANG, 160 CN, 110179 TEL: 24 865 998 42 FAX: 24 865 999 70 Class: F STRUCTURAL SUPPLIER Specification Controlled with Limitations: BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS Page 128 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Shop A02 curing ovens A02-9-3, A02-9-8, A02-10-3A & A02-10-3B BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Shop A02 Limitation: Shop A03 Touch-up application only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Shop A02 Limitation: Shop A03 Touch-up application only BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Shop A03 BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Shop A03 BAPS 150-019 INSTALLATION OF COLD EXPANDED RIVETLESS NUT PLATES Limitation: Shop A03 BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Shop A03 manual riveting only BAPS 157-27 INTEGRAL FUEL TANK SEALING Limitation: Shop A03 BAPS 160-10 CHROMIC ACID ANODIZING Limitation: Shop A02 BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Shop A02 Type 1 Limitation: Shop A03 Type 2 touch up only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Shop A02 Type 1 Limitation: Shop A03 Type 2 Manual Application Alodine 1132 Pen only BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: Shop A02 BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Page 129 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Limitation: Shop A02 BAPS 180-01 ALKALINE CLEANING Limitation: Shop A02, Tanks A02-1-1, A02-1-2 & A02-1-3 BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Limitation: Shop A02 BAPS 188-02 COLD WORKING OF HOLES PPS 01.02 FORMING ALUMINUM ALLOYS Limitation: Shop A01 & Shop A02 PPS 02.70 INSTALLATION OF ADHESIVE BONDED FASTENERS Limitation: Shop A01 PPS 06.13 INSTLLATION FO PERMASWAGE FITTINGS Limitation: Shop A01 PPS 06.18 CERTIFICATION OF PERMASWAGE TOOLING Limitation: Shop A01 PPS 06.20 ASSEMBLY AND INSTALLATION OF RYNGLOK SWAGED CONNECTORS Limitation: Shop A01 PPS 09.06 ELETRICAL BONDING AND GROUDING OF AIRCRAFT STRUCTURES Limitation: Shop A01 PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN Limitation: Shop A01 PPS 20.03 PENETRANT FLAW DETECTION Limitation: Shop A02 PPS 20.07 CONDUCTIVITY TESTING Limitation: Shop A02 PPS 20.08 HARDNESS TESTING Limitation: Shop A02 PPS 21.20 MIXING AND HANDLING TWO PART SEALANTS Limitation: Shop A01 PPS 25.14 GENERAL ELECTRIC PSA529/SRC-18 SILICONE BASE ADHESIVE Limitation: Shop A01 PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS Limitation: Shop A02 PPS 31.02 CLEANING PROCESSES OF ALUMINUM Limitation: Shop A02 PPS 31.07 CLEANING AND STRIPPING OF PAINTED SURFACES Limitation: Shop A02 Page 130 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PPS 32.01 CROMATE CONVERSION COATING Limitation: Shop A02 PPS 32.02 MANUAL APPLICATION OF CHEMICAL CONVERSION COATINGS Limitation: Shop A02 PPS 32.03 CHROMIC ACID ANODIZING (A1) Limitation: Shop A02 PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) Limitation: Shop A02 PPS 34.08 EPOXY PRIME Limitation: Shop A02 PPS 34.41 APPLICATION OF EPOXY-POLYAMIDE ENAMEL (F22) Limitation: Shop A02 AVIO EXCELENTE S.A. DE C.V., 0000108648 AV. SAN LORENZO, 651 C.D. JUAREZ, CHI MX, 32310 TEL: 656 627 02 30 FAX: 656 627 02 30 Class: C MANUFACTURER AVIO-DIEPEN BV, 0000137491 J. KEPLERWEG 16, 2400 AC ALPHEN AAN DEN RIJN, 12 NL, 2408 AB TEL: 31-172-449-777 FAX: 31-172-449-789 Class: D DISTRIBUTOR AVIO-DIEPEN INC., 0000102247 561 AIRPORT S. PKWY. SUITE 500 ATLANTA, GA US, 30349-8608 TEL: 770-996-6430 FAX: 770 996 5612 Class: D DISTRIBUTOR AVIOMAN S.R.L., 0000134623 VIA M.CURIE 19/23 BRINDISI, BR IT, 72100 TEL: 514 855 5000 FAX: 514 855 5000 Class: A SUBCONTRACTORS AVIONIC INSTRUMENTS INC., 1414 RANDOLPH AVE. AVENEL, NJ US, 07001-2402 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval V5AR787J& EASA dual approval EASA.145.6052. 0000101876 Specification Controlled: BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Page 131 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 732-781-1040 FAX: 732-781-1090 AVIONICA INC., 0000114828 9941 W. JESSAMINE ST. MIAMI, FL US, 33157-5374 TEL: 786 544 1150 FAX: 786 544 1110 Class: B EQUIPMENT SUPPLIERS AVIONICS ENGINEERING SERVICES, 0000117351 6416 TANQUE VERDE E., SUITE C TUCSON, AZ US, 85715-3825 TEL: 520 886 8520 FAX: 520 886 0293 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Approval Holder Capability List #03-1006-01 (TSO:PT1483NM / PMA: PQ1452NM) AVIONIX CORP., 0000101449 35 RUTA COURT SOUTH HACKENSACK, NJ US, 07606 TEL: 201 343 1550 FAX: 201 343 0499 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION AVIOR INTEGRATED PRODUCTS INC., 0000106769 840 VADNAIS GRANBY, QC CA, J2J 1A7 TEL: 450 378-8420-230 FAX: 514 324 6241 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS Specification Controlled: BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS BAPS 188-08 MACHINING OF COMPOSITES BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... BAPS 260-020 FABRICATION OF HIGH SERVICE TEMPERATURE BMI RESIN SYSTEM COMPOSITE COMPONENTS Page 132 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 260-03 POTTING OF HONEYCOMB SANDWICH PANELS BAPS 260-04 FABRICATION OF 355 DEGREE F CURE GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS CAPTIVE LABORATORY PPS 10.04 WET LAY-UP FABRICATION OF GLASS FABRIC/POLYESTER RESIN LAMINATES PPS 10.08 FORMING THERMOPLASTIC SHEET PPS 10.21 CERTIFICATION OF AUTOCLAVES PPS 10.22 PREPARATION OF MOLDS PPS 10.23 STORAGE, HANDLING AND PREPARATION OF PRE-IMPREGNATED MATERIALS PPS 10.24 PREPARATION OF HONEYCOMB CORES FOR LAY-UP IN SANDWICH PANEL ASSEMBLIES PPS 10.35 FABRICATION OF 250 F CURE, EPOXY RESIN PRE-IMPREGNATED, FIBRE REINFORCED COMPOSITE PARTS PPS 10.39 MACHINING OF FIBRE REINFORCED COMPOSITE PARTS PPS 10.51 CERTIFICATION OF OVENS PPS 25.08 EC-1099 ADHESIVE PPS 25.52 EC-2216 B/A GREY ADHESIVE PPS 25.55 EC-1357N ADHESIVE PPS 25.63 EC-1300-L ADHESIVE PPS 31.14 CLEANING ALUMINIUM SCREEN FOR LAY-UP IN COMPOSITE PARTS PPS 34.08 EPOXY PRIME PPS 34.19 APPLICATION OF F14 ANTI-STATIC COATING PPS 34.34 SURFACE FINISHING COMPOUNDS (F33) PPS 34.41 APPLICATION OF EPOXY-POLYAMIDE ENAMEL (F22) Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Electrical bond type - STA-MC, AFA-MC03, FAY-MC01 & BJP-MM/BST-MM only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limitation to manual riveting only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation to type II with Touch-n-prep alodine1132 BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES Page 133 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Limitation: Class 2 holes (both straight and countersink) – low load bearing transfer fastener holes. PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) Limitation: Paint Booth #2 AVIOR PRODUITS INTEGRES, 0000106770 1001 AUTOROUTE 440 O. LAVAL, QC CA, H7L 3W3 TEL: 450-629-6200-506 FAX: 514 324 6241 Class: A SUBCONTRACTORS Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3E WELDING EVALUATION BAPS 136-120 POLISHING OF ALUMINUM ALLOY SKIN BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 172-11 SPOT WELDING BAPS 172-34 FUSION WELDING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-040 AQUEOUS DEGREASING BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY MPS 250-301 PENETRANT INSPECTION MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 MPS 250-341 HEAT TREATMENT OF ALUMINUM PPS 01.02 FORMING ALUMINUM ALLOYS PPS 02.64 INSTALLATION OF POTTING TYPE SANDWICH PANEL Page 134 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval FASTENERS PPS 10.22 PREPARATION OF MOLDS PPS 10.28 ASSEMBLY OF WIRE THERMOCOUPLES PPS 20.03 PENETRANT FLAW DETECTION PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS PPS 21.21 GENERAL SEALING PRACTICES PPS 25.23 EC-1300 ADHESIVE PPS 25.30 BONDING USING DHMS A6.09 EPOXY ADHESIVE PPS 25.50 RTV SILICONE ADHESIVES PPS 25.52 EC-2216 B/A GREY ADHESIVE PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS PPS 31.01 CLEANING OF ALUMINUM ALLOY FOR RESISTANCE WELDING PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 32.01 CROMATE CONVERSION COATING PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PPS 36.07 METAL TO METAL & METAL TO METAL HONEYCOMB HIGH STRENGTH BONDING USING DHMS A6.03 ADHESIVE FILM &PRIM PPS 36.10 METAL BONDING OF DE HAVILLAND PARTS TO BAC 5555 AND BAC 5514 PPS 37.01 RESISTANCE WELDING ALUMINUM ALLOYS PPS 37.11 REQUIREMENTS FOR RESISTANCE WELDING PPS 37.12 QUALIFICATION AND CERTIFICATION: RESISTANCE WELDING MACHINES Specification Controlled with Limitations: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Limited to cotter pin installation only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: MANUAL APPLICATION ONLY BAPS 157-27 INTEGRAL FUEL TANK SEALING Limitation: Faying surface sealing of P/Ns: GM427-5030-21 & GM427-5030-22 only BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: NOT APPROVED TO PERFORM INJECTION SEALING BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to typ 2 prep pen 1132 only Page 135 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: ALL FORMS EXCEPT FORGINGS & CASTINGS MPS 250-201 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES AEROSPATIALE A330/A340 PROGRAM Limitation: Limited to non intrusive marking only PPS 10.21 CERTIFICATION OF AUTOCLAVES Limitation: Limited to 250 F and under 100 PSI AVK INDUSTRIES PRODUCTS, 0000117437 25323 RYE CANYON ROAD VALENCIA, CA US, 91355 TEL: 661-257-2329 FAX: 661-257-8043 Class: C MANUFACTURER AVMATS, 0000102157 827 TEXAS CT. O'FALLON, MO US, 63366-1930 TEL: 636-532-2674 FAX: 636-812-3480 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval SE2R158L & EASA dual approval EASA.145.4353. AVMAX EXECUTIVE INTERIORS, 0000133266 264 ADRIEN-PATENAUDE VAUDREUIL-DORION, QC CA, J7V 5V5 TEL: 450 424 9636-229 FAX: 450 424 9634 Class: A SUBCONTRACTORS AVNET ELECTRONIC GROUP, 0000107603 9200 INDIAN CREEK PWK, 9 CORP WOODS OVERLAND PARK, KS US, 66210 TEL: 913-663-7900 FAX: 480 961 1137 Class: D DISTRIBUTOR AVNET INC., 0000106783 60 MCKEMY AVE. S. CHANDLER, AZ US, 85226-3441 Class: D DISTRIBUTOR Specification Controlled: BAPS 710-001 INTERIOR AIRCRAFT, VARNISH APPLICATION Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Touch-up Only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 2 Manual Application_ Alodine 1132 Touch and Prep Pen Page 136 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 770-799-4900 FAX: 770-799-4945 AVNET INC., 0000107670 2211 S. 47 TH ST. PHOENIX, AZ US, 85034 TEL: 480-967-2000 FAX: 999 999 9999 Class: C MANUFACTURER AVNET INC. / ELECTRO AIR, 0000103763 400 FRANKLIN ROAD, SUITE 260 MARIETTA, GA US, 30067-7735 TEL: 770-799-4912 FAX: 770 799 4945 Class: D DISTRIBUTOR AVNET USI, 0000107505 2775 W. CYPRESS CREEK ROAD FORT LAUDERDALE, FL US, 33309-1750 TEL: 954 493 8111-239 FAX: 954 493 8212 Class: D DISTRIBUTOR AVON VALLEY PRECISION ENGINEERING L, 0000133932 BATH ROAD, BITTON BRISTOL, BR GB, BS30 6HZ TEL: 0117 932 8118 FAX: 0117 932 8119 Class: A SUBCONTRACTORS AVOX SYSTEMS INC., 0000101274 225 ERIE ST. LANCASTER, NY US, 14086-9502 TEL: 716 686 1662 FAX: 716 681 1089 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval LX1R312K & EASA dual approval EASA.145.4853. AVTEC AERO MAINTENANCE INC, 0000106198 12912 BRAULT MIRABEL, QC CA, J7J 1P3 TEL: 514 735 1700 FAX: 514 735 5938 Class: E MAINTENANCE ORGANIZATION AVTECHTYEE INC., 0000100963 6500 MERRIL CREEK PKWY. EVERETT, WA Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval IG6R621N & EASA dual Page 137 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification US, 98203 TEL: 425-249-4639 FAX: 206-695-8254 Scope of Approval approval EASA.145.4224. AVX CORP., 0000102752 801 S. 17TH AVE. MYRTLE BEACH, SC US, 29577-4245 TEL: 843-967-0648 FAX: 843 626 7740 Class: C MANUFACTURER AXALTA COATING SYSTEMS, 0000135771 7961 WINCHESTER ROAD FRONT ROYAL, VA US, 22630 TEL: 540-622-1138 FAX: 540-622-1344 Class: C MANUFACTURER AXIOM MATERIALS, INC., 0000133153 2322 PULLMAN ST. SANTA ANA, CA US, 92705 TEL: 949 623 4400 FAX: 949 261 6009 Class: C MANUFACTURER AXMINSTER CARPETS LTD., 0000109021 GAMBERLAKE AXMINSTER, DV GB, EX13 5PQ TEL: 1297 32244 FAX: 1297 63066 Class: C MANUFACTURER AXON' CABLE S.A., 0000108253 ROUTE DE CHALONS-EN-CHAMPAGNE MONTMIRAIL, 51 FR, 51210 TEL: 847 230 7805 FAX: 847 230 7849 Class: B EQUIPMENT SUPPLIERS AXSON TECHNOLOGIES US, INC., 0000134741 1611 HULTS DRIVE EATON RAPIDS, MI US, 48827 TEL: 517 663 8191 FAX: 517 663 0523 Class: C MANUFACTURER B & B SPECIALITIES INC. & GS AEROSP, 4321 LA PALMA AVE. E. Class: C MANUFACTURER 0000109084 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 989 Page 138 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval ANAHEIM, CA US, 92807-1887 TEL: 714 985 3000 FAX: 714 993 7214 B & R MACHINE CO. LTD., 0000106785 5599 MCADAM ROAD MISSISSAUGA, ON CA, L4Z 1N4 TEL: 905 890 2444 FAX: 905 890 6240 Class: A SUBCONTRACTORS B&B AIRPARTS, INC., 0000108670 1831 S. HOOVER CT. WICHITA, KS US, 67209-2853 TEL: 316 946 0300 FAX: 316 946 0333 Class: A SUBCONTRACTORS B&E MFG. CO., 0000106786 7562 ORANGEWOOD AVE. STANTON, CA US, 90680-3429 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING Specification Controlled: BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to surface preparation only. Limitation: Limited to surface preparation only. Limitation: Limited to Faying Surface Bond (FAY-MM), Bonding Through Fasteners (AFA-MM), and Interference Fit Fasteners (IFF-MM). BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to manual riveting only. BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: LIMITED TO FAY, FILLET, AND WET INSTALLATION OF FASTENERS. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 2 manual application only BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: Limited to Rockwell Hardness Testing Limitation: Limited to Rockwell Hardness Testing Limitation: Hardness Testing Limited to Rockwell Hardness Page 139 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 714 898 2269 FAX: 714 897 9179 B&L INTERNATIONAL., 0000108777 1189 CARTER CIR. PURVIS, MS US, 39475-3337 TEL: 601 261 5127 FAX: 601 261 2420 Class: H COMMERCIAL OFF THE SHELF B. L. VALVE INC., 0000110438 9133 LAJEUNESSE MONTREAL, QC CA, H2M 1S3 TEL: 514 383 4433 FAX: 514 383 7999 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods B.C. INSTRUMENTS, 0000106794 41 PROCTOR ROAD SCHOMBERG, ON CA, L0G 1T0 TEL: 416 324 3240-349 FAX: 905 939 8206 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS PPS 20.08 HARDNESS TESTING B.G.F. INDUSTRIES, 0000108318 401 AMHERST AVE. ALTAVISTA, VA US, 24517-1513 TEL: 434 369 4751 FAX: 434 369 1690 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM B.W. ELLIOTT MFG. CO. LLC., 0000100974 11 BECKWITH AVE. BINGHAMTON, NY US, 13901-1726 TEL: 607 772 0404-335 FAX: 607 772 0431 Class: B EQUIPMENT SUPPLIERS B/E AEROSPACE, 0000109154 GALVANIBAAN 5 NIEUWEGEIN, 01 NL, 3439 MG TEL: 3060 29 200 FAX: 3060 36 949 Class: C MANUFACTURER B/E AEROSPACE, 0000128165 2599 EMPIRE DR. Class: B EQUIPMENT SUPPLIERS Page 140 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval WINSTON-SALEM, NC US, 27103 TEL: 336 744 6925 FAX: 336 744 1009 B/E AEROSPACE, 0000120197 7155 FENWICK LANE WESTMINSTER, CA US, 92683-5218 TEL: 714-896-9001 FAX: 714 896 9008 Class: A SUBCONTRACTORS B/E AEROSPACE, 0000109006 25 DUNLOP AVE. WINNIPEG, MB CA, R2X 2V2 TEL: 204-594-5275 FAX: 204 783-5436 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION B/E AEROSPACE B.V., 0000136471 ULANGO LOT 18 3RD STREET FIRST PHILIPPIN TANAUAN CITY BATANGAS, 12 PH, 4232 TEL: 63 43 430 0000 FAX: 514 855 5000 Class: B EQUIPMENT SUPPLIERS B/E AEROSPACE BUSINESS JET GROUP, 0000104610 9100 N.W. 105TH CIR. MIAMI, FL US, 33178-1305 TEL: 305-459-7053 FAX: 305 459 7190 Class: B EQUIPMENT SUPPLIERS B/E AEROSPACE FISCHER GMBH, 0000125551 MULLER-ARMACK-STR. 4 LANDSHUT, 09 DE, 84034 TEL: 49-0-871-932-... FAX: 871 93248 22 Class: B EQUIPMENT SUPPLIERS B/E AEROSPACE INC, 0000125782 5795 LOGISTICS PARKWAY ROCKFORD, IL US, 61109 TEL: 815 316 6310 FAX: 815 316 6329 Class: B EQUIPMENT SUPPLIERS B/E AEROSPACE INC., Class: 0000101121 Page 141 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 355 KNICKERBOCKER AVE BOHEMIA, NY US, 11716 TEL: 6312562179 FAX: 631 563 8781 B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION B/E AEROSPACE INC., 0000102231 5349 S. EMMER DR. NEW BERLIN, WI US, 53151-7302 TEL: 262-679-6105 FAX: 262 679 6175 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS C MANUFACTURER B/E AEROSPACE INC., 0000101160 10800 PFLUMM ROAD LENEXA, KS US, 66215-4061 TEL: 913 338 7246 FAX: 913 469 8419 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER E MAINTENANCE ORGANIZATION B/E AEROSPACE INC., 0000101343 3355 LA PALMA AVE. E. ANAHEIM, CA US, 92806-2815 TEL: 714 688 4101 FAX: 714 688 4156 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval B98R479N & EASA dual approval EASA.145.4231. B/E AEROSPACE INC., 0000131985 4101 NORTH STAR BLVD. GREAT FALLS, MT US, 59405 TEL: 406 452 1600 FAX: 406 452 1511 Class: A SUBCONTRACTORS B/E AEROSPACE INC., 0000107824 93 NETTIE FENWICK ROAD FENWICK, WV US, 26202 TEL: 304 846 8819 FAX: 304 846 2024 Class: B EQUIPMENT SUPPLIERS B/E AEROSPACE INC., 0000104954 1851 S. PANTANO ROAD Class: B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval PB9R229N & EASA dual approval EASA.145.5461. Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING BAPS 145-004 INSTALLATION OF MECHANICALLY ATTACHED TERMINALS BAPS 145-006 TERMINATION OF THE SHIELD ON SHIELD ON SHIELDED WIRE AND CABLE BAPS 145-008 STOWAGE OF ELECTRICAL WIRING AND CONNECTORS BAPS 172-12 TINNING AND SOLDERING Page 142 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TUCSON, AZ US, 85710-6735 TEL: 520 733 1733 FAX: 520 733 1781 B/E AEROSPACE INC., 0000103700 1455 FAIRCHILD ROAD WINSTON SALEM, NC US, 27105-4588 TEL: 336 744 6930 FAX: 336 744 1091 Class: B EQUIPMENT SUPPLIERS B/E AEROSPACE SYSTEMS GMBH, 0000109066 REVALSTRASSE 1 LUBECK, 01 DE, 23560 TEL: 451 4093-2420 FAX: 451 4093 3659 Class: C MANUFACTURER B/E AEROSPACE UK LTD., 0000106494 GROVEBURY ROAD LEIGHTON BUZZARD, BE GB, LU7 8TB TEL: 152 585 8300 FAX: 152 585 3204 Class: C MANUFACTURER BA MEXICO CHIHUAHUA FACILITY(PAM-15, ALEJANDRO DUMAS NO. 11321 CHIHUAHUA, CHI MX, 31136 TEL: 614 158 6600 FAX: 0000600803 Class: A SUBCONTRACTORS Specification Controlled: PPS 20.07 CONDUCTIVITY TESTING Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Limited to Touch Up only. BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Limited to Touch Up only. BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to Manual Riveting only. BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING Limitation: Limited to touch up only BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Limited to wet installation and faying surface process BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to type 2 Manual Application – Alodine Page 143 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 1132 Touch and Prep Pen BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: (Limited for Glycol Quenching) Limitation: For Oven SOHT-JLS-0001 (Class 10 Type A). Limitation: The scope of approval for Oven SOHT-JLS-0001 (Class 10 Type A).will be: Limitation: - For Solution Heat treatment @ 870 °F (466 °C) to 985 °F(529 °C) for material thicknesses of 0.025" Limitation: to 0.090" Limitation: - For Aging heat treatment @ 225 °F (107 °C) to 450 °F(529 °C) for material thicknesses of 0.025" Limitation: to 0.090" BAPS 168-13 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS PPS 01.02 FORMING ALUMINUM ALLOYS Limitation: Limitation: Solution Heat treatment @ 870 °F (466 °C) to 985 °F(529 °C) for material thicknesses of 0.020" to 0.080" Limitation: Aging Heat Treatment @225 °F (107 °C) to 450°F (232°C) for material thicknesses of 0.020" to .080 PPS 20.08 HARDNESS TESTING Limitation: Limited to Rockwell Hardness Testing BAE SYSTEMS (OPERATIONS) LTD., 0000107031 AIRPORT WORKS ROCHESTER, KE GB, ME1 2XX TEL: 1634 203293 FAX: 44 1634 204301 Class: B EQUIPMENT SUPPLIERS BAE SYSTEMS - REGIONAL AIRCRAFT, 0000133663 BLD 37, PRESTWICK AIRPORT PRESTWICK, LO GB, KA9 2RW TEL: 01292-675000 FAX: 514 855 5000 Class: E MAINTENANCE ORGANIZATION BAE SYSTEMS CONTROLS INC., 0000106157 4250 AIRPORT EXPRESSWAY FORT WAYNE, IN US, 46809 TEL: 260 434 5500 FAX: 260 434 5616 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval GZFR112K & EASA dual approval EASA.145.4642. Page 144 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAILEYS FABRICS & SUPPLIES INC., 0000108259 1401 BAILEY LANE N. TUCSON, AZ US, 85705-7262 TEL: 520 628 7321 FAX: 520 624 4652 Class: D DISTRIBUTOR BAKER DISTRIBUTING CO., 0000100859 811 E WATERMAN, SUITE D WICHITA, KS US, 67202-4700 TEL: 316 263 6212 FAX: 316 263 6251 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods BAKS INTERNATIONAL, 0000128893 1121 ROUND TABLE DR. DALLAS, TX US, 75247 TEL: 214 631 9700 FAX: 914 273 2875 Class: B EQUIPMENT SUPPLIERS BAL SEAL ENGINEERING CO., 0000101193 19650 PAULING FOOTHILL RANCH, CA US, 92610-2610 TEL: 949 460 2100 FAX: 949 460 2300 Class: C MANUFACTURER BALLY RIBBON MILLS INC., 0000106790 23 N. 7TH ST. BALLY, PA US, 19503-9638 TEL: 610-845-2211-... FAX: 610-845-8013 Class: C MANUFACTURER BALTEK INC., 0000122540 5240 NATIONAL CENTER DR. COLFAX, NC US, 27235 TEL: 201 767 1400 FAX: 201 387 6631 Class: C MANUFACTURER BAMMC AEROPUERTO, 0000600450 CARRETERA QUERETARO-TEQUISQUIAPAN COLON, QRO MX, 76270 Class: A SUBCONTRACTORS F STRUCTURAL SUPPLIER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limitation to: Limitation: Per BAQM Part III, Appendix C QD 4.6-40 is Page 145 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification TEL: FAX: Learjet Approved Suppliers Scope of Approval deferred for this Bombardier Supplier Facility. Limitation: Supplier surveillance will be performed per section 4.17 Internal Quality Audits of the BAQM. BAND-IT-IDEX INC., 0000129126 4799 DAHLIA ST. DENVER, CO US, 80216 TEL: 303 320 4555 FAX: 303 333 6549 Class: C MANUFACTURER BANJO CORP., 0000125423 150 BANJO DR. CRAWFORDSVILLE, IN US, 47933-9603 TEL: 765 362 7367 FAX: 800 458 0232 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to parts call on Bombardier drawing 215T40008 rev C BANSBACH EASYLIFT WORLDWIDE, 0000108176 BARBAROSSA STRABE 8 LORCH, 07 DE, 73547 TEL: 49 7172 91070 FAX: 49 7172 21373 Class: B EQUIPMENT SUPPLIERS BAOJI TITANIUM INDUSTRY CO., LTD, 0000125178 NO.1, TAICHENG ROAD BAOJI, 250 CN, 721014 TEL: 86 09173382026 FAX: 86 09173382316 Class: C MANUFACTURER BARFIELD INC., 0000101108 4101 N. W. 29TH ST. MIAMI, FL US, 33142-5617 TEL: 305-894-5405 FAX: 305 894 5451 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval XBIR995K & EASA dual approval EASA.145.4239. BARNES AEROSPACE, 0000109315 1025 S. DEPOT DR. OGDEN, UT US, 84404-1390 TEL: 801 625 1318 FAX: 801 917 2007 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) Page 146 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-15 STRESS RELIEF OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 188-05 LASER CUTTING OF METALS CAPTIVE LABORATORY PSPEC 213 FORMING OF ALUMINUM ALLOYS PSPEC 300 PENETRANT FLAW DETECTION PSPEC 305 RADIOGRAPHIC EXAMINATION PSPEC 420 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS PSPEC 440 HEAT TREATMENT OF CORROSION RESISTANT STEELS Specification Controlled with Limitations: BAPS 180-01 ALKALINE CLEANING BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS Limitation: Limited to Titanium Alloys BARNES AEROSPACE ( JET DIE PLANT ), 5300 AURELIUS ROAD LANSING, MI US, 48911-4116 TEL: 860 687 5292 FAX: 517 393 2243 0000109673 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAPS 168-15 STRESS RELIEF OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Page 147 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 180-001 ALKALINE CLEANING BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 188-04 SUPERPLASTIC FORMING OF TITANIUM ALLOY-TI 6AL-4V CAPTIVE LABORATORY PSPEC 231 FABRICATION OF TITANIUM AND TITANIUM ALLOYS PSPEC 300 PENETRANT FLAW DETECTION PSPEC 420 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS Specification Controlled with Limitations: BAPS 186-03 CHEMICAL MILLING OF TITANIUM & TITANIUM ALLOYS BAPS 188-05 LASER CUTTING OF METALS Limitation: Class 2 Material Thickness 0.032" BASF AUXILIARY CHEMICALS CO LTD, 0000135072 300 JIANG XIN SHA ROAD PUDONG, 020 CN, 200137 TEL: 999 999 9999 FAX: 999 999 9999 Class: C MANUFACTURER BATIMAT INC., 0000110441 4790 JEAN TALON O. MONTREAL, QC CA, H4P 1W9 TEL: 514 735 1979-227 FAX: 514 735 9688 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods BAYER INC., 0000108501 77 BELFYELD ROAD TORONTO, ON CA, M9W 1G6 TEL: 416 240 4914 FAX: 416 240 5477 Class: C MANUFACTURER BAYER MATERIAL SCIENCE LLC., 0000108128 119 SALISBURY ROAD SHEFFIELD, MA US, 01257-9706 TEL: 800 628 5084 FAX: 413 229 8717 Class: C MANUFACTURER BAZ AIRBONE COMPONENTS & ASSEMBLIES, BAR LEV INDUSTRIAL PARK D.N MISGAV, 01 Class: A SUBCONTRACTORS 0000128743 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: ANTI SEIZE COUMPOUND (MILK OF MAGNESIA) Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES Page 148 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification IL, 20179 TEL: 972 049569000 FAX: 972 049550091 Scope of Approval SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 168-15 STRESS RELIEF OF METALS BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAZZ HOUSTON CO., 0000124854 12700 WESTERN AVE. GARDEN GROVE, CA US, 92841 TEL: 800-385-9608 FAX: 714-898-1389 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled with Limitations: PSPEC 236 FABRICATION OF STEELS Page 149 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval Limitation: Cold forming only. BC INDUSTRIAL, 0000126831 14 OLD FOREST KIRKLAND, QC CA, H9J 2Z8 TEL: 514 585 8907 FAX: INOP USE EMAIL Class: H COMMERCIAL OFF THE SHELF BEACH FILTER PRODUCTS INC., 0000129383 7682 GLENVILLE ROAD GLEN ROCK, PA US, 17327 TEL: 717 235 1136 FAX: 717 235 4858 Class: C MANUFACTURER BEACON FABRICATION LLC, 0000134733 3903 CAVALIER DRIVE GARLAND, TX US, 75042 TEL: 972 272 2561 FAX: 972 487 0258 Class: A SUBCONTRACTORS BEAGLE TECHNOLOGY GROUP LIMITED, 0000110733 STONY LANE CHRISTCHURCH, DO GB, BH23 1EX TEL: 1202 409711 FAX: 1202 499449 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Part no F-GGCS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 186 CHEMICAL MILLING OF ALUMINUM PPS 42.01 CHEMICAL MILLING OF ALUMINUM AND ALUMINUM ALLOYS PSPEC 213 FORMING OF ALUMINUM ALLOYS PSPEC 300 PENETRANT FLAW DETECTION PSPEC 401 HEAT TREATMENT OF ALUMINIUM AND ALUMINIUM ALLOYS PSPEC 410 CHROMIC ACID ANODISING PSPEC 419 CHEMICAL CONVERSION COATING OF ALUMINIUM AND ALUMINIUM ALLOYS Page 150 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PSPEC 706 CHEMICAL MILLING OF ALUMINIUM ALLOYS PSPEC 910 ETCH AND EPOXY PRIMING Specification Controlled with Limitations: PSPEC 501 MANUAL ARGON ARC WELDING Limitation: Limitation: Limited to tack weld component CN621 6012 009 only. BEEMER PRECISION INC., 0000106796 230 NEW YORK DR. FORT WASHINGTON, PA US, 19034-2504 TEL: 215 646 8440 FAX: 215 283 3397 Class: C MANUFACTURER BEIJING INSTITUTE OF AERONAUTICAL, 0000125902 HUANSHAN VILLAGE HAIDIAN DISTRICT, 010 CN, 100095 TEL: 010 6249 6468 FAX: 010 6249 6488 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Qualified as Independent Laboratory for testing of composites per test plan MAM-BA500-008 Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM Page 151 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-4C TESTING OF THERMAL PROPERTIES (EXPANSIONS, TMA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS INDEPENDANT LABORATORY BELDEN EUROPE, 0000131818 STOCKTON ST. LITTLEBOROUGH, LA GB, OL158YJ TEL: 44 0 1706 374015 FAX: 44 0 1706 374 Class: C MANUFACTURER BELDEN WIRE & CABLE CO., 0000108320 2200 US HWY. 27 S. RICHMOND, IN US, 47374-7279 TEL: 765-983-5200 FAX: 765-983-5294 Class: C MANUFACTURER BELL MEMPHIS INC., 0000106797 1650 CHANNEL AVE. MEMPHIS, TN US, 38113 TEL: 901 947 1102 FAX: 901 774 6147 Class: C MANUFACTURER BELLOFRAM SILICONES INC., 0000127107 8019 OHIO RIVER BLVD. NEWELL, WV US, 26050 TEL: 304 387 1200 FAX: 304 387 1289 Class: C MANUFACTURER BENJAMIN SUPPLY, 440 N. 7TH AVE. TUCSON, AZ US, 85705-8333 Class: H COMMERCIAL OFF THE SHELF 0000106799 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 152 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 520-777-7000 FAX: 520-623-3566 BENTELER STAHL / ROHR GMBH & CO.KG, RESIDENZSTR. 1 PADERBORN, 05 DE, 33104 TEL: 52 5481 - 0 FAX: 52 54 1 36 66 0000108857 Class: C MANUFACTURER BERGEN CABLE TECHNOLOGY LLC., 0000102021 343 KAPLAN DR. FAIRFIELD, NJ US, 07004-2510 TEL: 973 276 9596 FAX: 973 276 9566 Class: C MANUFACTURER BERNHARDT DESIGN, 0000102241 1839 MORGANTON BLVD. LENOIR, NC US, 28645-5338 TEL: 828 758 9811 FAX: 828 759 6258 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods BERRY PLASTICS CORPORATION, 0000134337 51 BALLOU BLVD BRISTOL, RI US, 02809 TEL: 817 456 2487 FAX: 514 855 5000 Class: C MANUFACTURER BEVERLY HILLS INTERNATIONAL INC., 0000111086 1101 S. ROGERS CIR., SUITE 4 BOCA RATON, FL US, 33487 TEL: 561 988 6998 FAX: 561 988 0083 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods BFTC REFURBISHMENT CENTER, 0000600801 4174 S. OLIVIER WICHITA, KS US, 67210 TEL: 316-946-2000 FAX: 316-946-3400 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: see DSC91 Specification Controlled: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 157-27 INTEGRAL FUEL TANK SEALING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 157-32 HIGH TEMPARATURE SEALING FOR NON -FUEL TANK APPLICATIONS BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE Page 153 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval FITTING ON PLUMBING LINES Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Limited to touch up only with 10P4-2NF (base) / EC-117s (hardener) Touch-Up Kit BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Limited to touch up only with 620H Series (Base) / 620C Series (Catalyst) and 670 Series (Base) / 670C6878 (Catalyst) Touch-Up Kits. BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to manual riveting only. BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to Type II with 1132 Touch&Prep Pen only. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to Type II with 1132 Touch&Prep Pen only. BAPS 174-02 FABRICATION OF PLUMBING LINES Limitation: Limited to verification of minimum length required from end of tube to tangent point per Table 5 and Table 6. BAPS 174-09 INSTALLATION OF WIGGINS TYPE COUPLINGS ON RIGID PLUMBING LINES BI TECHNOLOGIES CORP., 0000101727 4200 BONITA PLACE FULLERTON, CA US, 92835-1051 TEL: (714)447-2514 FAX: 526865665994 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER BIGORRE AEROSPACE CORP., 0000102476 6295 42ND ST. N. PINELLAS PARK, FL US, 33781-6041 TEL: 727 525 8115 FAX: 727 522 5820 Class: Systems with Limitations: C MANUFACTURER 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval UT4R582M & EASA dual approval EASA.145.5187. BILD INDUSTRIES INC., 0000101523 800 CLEARWATER LOOP ROAD Class: D DISTRIBUTOR Page 154 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval POST FALLS, ID US, 83854-9480 TEL: 208 773 0630 FAX: 208 773 0902 BIRK AEROSYSTEMS CORP., 0000104460 14321 COMMERCE DR. GARDEN GROVE, CA US, 92843-4949 TEL: 714 554 9782 FAX: 714 554 3659 Class: C MANUFACTURER BISCO INDUSTRIES INC, 0000132954 3205 ROYALTY ROW IRVING, TX US, 75062 TEL: 972 721 1454 FAX: 303 858 8341 Class: D DISTRIBUTOR BISHOP AVIATION INC., 0000101054 506 JACK MOUNTAIN ROAD HOT SPRINGS, AR US, 71913-1202 TEL: 501 525 8228 FAX: 501 525 0292 Class: B EQUIPMENT SUPPLIERS BIVAR INC., 0000108804 4 THOMAS IRVINE, CA US, 92618-2512 TEL: 949 951 8808 FAX: 949 951 3974 Class: C MANUFACTURER BJB ENTERPRISES INC., 0000127868 14791 FRANKLIN AVE. TUSTIN, CA US, 92790 TEL: 714 734 8450 FAX: 714 734 8929 Class: C MANUFACTURER BJG ELECTRONICS, INC., 0000135858 141 REMINGTON BLVD. RONKONKOMA, NY US, 11779 TEL: 631-737-1234 FAX: 631-737-3888 Class: C MANUFACTURER D DISTRIBUTOR BLACHFORD INC., Class: 0000108708 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 155 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 1400 NUCLEAR DR. WEST CHICAGO, IL US, 60185-1636 TEL: 630 231 8300 FAX: 630 231 8321 C MANUFACTURER BLACK BOX CANADA, 0000126902 860 DENISON ST., UNIT 12 MARKHAM, ON CA, L3R 3K4 TEL: 416 490 7100 FAX: 416 490 7720 Class: H COMMERCIAL OFF THE SHELF BLACK BOX CORP. OF PA, 0000101434 1000 PARK DR. LAWRENCE, PA US, 15055-1018 TEL: 877 877 2269 FAX: 800 321 0746 Class: D DISTRIBUTOR BLAIR STRIP STEEL CO., 0000115047 1209 BUTLER AVE. NEW CASTLE, PA US, 16101 TEL: 724 658 2611 FAX: 724 658 6548 Class: C MANUFACTURER BLANC-AERO INDUSTRIES, 0000106801 RUE JEAN VAURS, BP 298 VILLEFRANCHE DE ROUERGUE, 12 FR, 12200 TEL: 1 44 67 85 89 FAX: 1 43 07 25 23 Class: C MANUFACTURER BLANC-AERO INDUSTRIES UK LTD., 0000109984 BUTLERS LEAP RUGBY, WA GB, CV21 3RQ TEL: 1 788 559000 FAX: 1 788 568183 Class: C MANUFACTURER BLASER SWISSLUBE AG, 0000133918 WINTERSEISTRASSE HALSE-RUEGSAU, BE CH, 3415 TEL: 034 460 01 01 FAX: 034 460 01 00 Class: C MANUFACTURER Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: per EMCM-001 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM 1116 Page 156 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification BLASER SWISSLUBE INC., 0000108450 31 HATFIELD LANE GOSHEN, NY US, 10924-6712 TEL: 914 294 3200 FAX: 914 294 3102 Class: C MANUFACTURER BLUE SKY INDUSTRIES INC., 0000122892 595 MONTEREY PASS ROAD MONTEREY PARK, CA US, 91754 TEL: 213 620 9950-201 FAX: 213 620 9953 Class: D DISTRIBUTOR BMB SOLUTION COMPOSITES INC., 0000126352 3600 1ERE RUE, SUITE 10 ST-HUBERT, QC CA, J3Y 8Y5 TEL: 450-678-3330 FAX: 450-678-2155 Class: D DISTRIBUTOR BMT AEROSPACE INTERNATIONAL, 0000128981 HANDELSSTRAAT 6 OOSTKAMP, 09 BE, 8020 TEL: 32 50 24 90 00 FAX: 32 50 24 90 10 Class: A SUBCONTRACTORS Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM 693 Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-5A CORROSION TESTING BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) BAPS 160-06 PHOSPHATE TREATMENT BAPS 161-007 APPLICATION OF MIL-L-46010 SOLID FILM LUBRICANT BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT BAPS 168-14 HEAT TREATMENT OF STEELS Page 157 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 168-15 STRESS RELIEF OF METALS BAPS 168-19 CARBURIZING OF STEEL BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 176-14 NITAL ETCH INSPECTION OF STEEL PARTS BAPS 180-001 ALKALINE CLEANING BAPS 185-000 GRINDING OF STEEL PARTS BAPS 185-02 SHOT PEENING OF METAL PARTS CAPTIVE LABORATORY BOATHOUSE, 0000100709 724 MONTREAL - TORONTO BLVD. DORVAL, QC CA, H9S 1A1 TEL: 514-631-8503 FAX: 514-631-9113 Class: B EQUIPMENT SUPPLIERS BOB MCCALL CO., 0000101042 11035 IOTA DR. SAN ANTONIO, TX US, 78217-2609 TEL: 210 657 0521 FAX: 210 657 0521 Class: B EQUIPMENT SUPPLIERS BODYCOTE BELGIUM METAL TECHNOLOGY, 0000107236 MERCATOR SCIENCE PARK SINT LENDRIKSBORRE BRUSSELS, 02 BE, 1120 TEL: 2 268 0020 FAX: 2 268 7590 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAPS 168-14 HEAT TREATMENT OF STEELS BAPS 168-15 STRESS RELIEF OF METALS BAPS 168-19 CARBURIZING OF STEEL BODYCOTE COVENTRY, 0000108071 COLLIERY LANE THERMAL HOUSE EXHALL, WM GB, CV7 9NW TEL: 2476 367786 FAX: 2476 368158 Class: A SUBCONTRACTORS Specification Controlled: PPS 30.14 HEAT TREATMENT OF PSPEC 400 HEAT TREATMENT OF PSPEC 420 HEAT TREATMENT OF PSPEC 434 HEAT TREATMENT OF STEELS PSPEC 440 HEAT TREATMENT OF BODYCOTE HEAT TREATMENT, STILLINGTON STOCKTON-ON-TEES, CV 0000125370 Class: A SUBCONTRACTORS TITANIUM AND TITANIUM ALLOYS CARBON AND LOW ALLOY STEELS TITANIUM AND TITANIUM ALLOYS PRECIPITATION HARDENING (PH) CORROSION RESISTANT STEELS Specification Controlled: PSPEC 420 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS Page 158 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval GB, TS21 ILD TEL: 01740 630353 FAX: 01740 630075 BODYCOTE HEAT TREATMENT LTD., 0000106802 QUEENS AVE. MACCLESFIELD, CH GB, SK10 2BB TEL: 1625 501888 FAX: 1625 50310 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-14 HEAT TREATMENT OF STEELS BAPS 168-19 CARBURIZING OF STEEL BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS PPS 20.08 HARDNESS TESTING PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS PPS 30.08 STEEL HEAT TREATMENT - MARTENSITIC STAINLESS STEEL PPS 30.11 STEEL CASE HARDENING (CARBURIZING) PSPEC 400 HEAT TREATMENT OF CARBON AND LOW ALLOY STEELS PSPEC 434 HEAT TREATMENT OF PRECIPITATION HARDENING (PH) STEELS PSPEC 436 HEAT TREATMENT OF HEAT RESISTING ALLOYS PSPEC 440 HEAT TREATMENT OF CORROSION RESISTANT STEELS Specification Controlled with Limitations: BAPS 168-15 STRESS RELIEF OF METALS Limitation: LIMITED TO ALLOY STEEL PARTS ONLY BODYCOTE HEAT TREATMENTS LTD-, 0000107988 MACCLESFIELD ROAD HAZEL GROVE STOCKPORT, GM GB, SK7 5EN TEL: 1614 830511 FAX: 1614 835450 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-15 STRESS RELIEF OF METALS BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS PPS 30.06 PRECIPITATION HARDENABLE (PH) STAINLESS STEEL PSPEC 420 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS PSPEC 436 HEAT TREATMENT OF HEAT RESISTING ALLOYS PSPEC 440 HEAT TREATMENT OF CORROSION RESISTANT STEELS Specification Controlled with Limitations: PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS Limitation: Limited to Stress Relief & Aging Only. BODYCOTE HIT, 0000107952 Z. I. RUE DU TUMULUS SERRES-CASTET, 64 FR, 64121 TEL: 559 33 14 37 FAX: 559 33 92 71 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT BAPS 168-14 HEAT TREATMENT OF STEELS BAPS 168-15 STRESS RELIEF OF METALS Page 159 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 168-20 BAPS 168-30 BAPS 168-34 MPS 250-342 BODYCOTE METALLURGICAL COATING LTD., MAESGLAS INDUSTRIAL ESTATE NEWPORT, BR GB, NP20 2NN TEL: 01633245600 FAX: 999 999 9999 0000129583 HEAT HEAT HEAT HEAT TREATMENT TREATMENT TREATMENT TREATMENT OF OF OF OF COPPER AND COPPER ALLOYS CORROSION RESISTANT STEELS 6AI-6V-2SN TITANIUM ALLOY STEEL Class: A SUBCONTRACTORS Specification Controlled: PSPEC 429 PLASMA FLAME DEPOSITION BODYCOTE THERMAL PROCESSING, 0000106720 7474 GARDEN GROVE BLVD. WESTMINSTER, CA US, 92683-2298 TEL: 714 893 6561 FAX: 714 895 2754 Class: A SUBCONTRACTORS Systems with Limitations: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Limitation: NOT AUTHORIZED TO PURCHASE RAW MATERIAL BODYCOTE THERMAL PROCESSING, 0000117948 3370 BENEDICT WAY HUNTINGDON PARK, CA US, 90255-4517 TEL: 323 583 1231 FAX: 323 583 9640 Class: A SUBCONTRACTORS Specification Controlled: LES 1006 INSPECTION, MAGNETIC PARTICLE LES 1016 HEAT TREATMENT OF STEEL ALLOYS BODYCOTE THERMAL PROCESSING, 2900 S. SUNOL DR. LOS ANGELES, CA US, 90058-4315 Class: A SUBCONTRACTORS Specification Controlled: PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS PPS 30.14 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS 0000107784 Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 180-001 ALKALINE CLEANING LES 1051 HEAT TREAT OF ALUMINUM ALLOYS MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 MPS 250-341 HEAT TREATMENT OF ALUMINUM PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS PSPEC 401 HEAT TREATMENT OF ALUMINIUM AND ALUMINIUM ALLOYS Page 160 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Specification Controlled with Limitations: PPS 30.02 SUB-ZERO TREATMENT OF STEEL PARTS Limitation: NUMBER WAS 33-02 DUE TO TYPO ERROR TEL: 323-264-0111 FAX: 323-268-9897 BODYCOTE THERMAL PROCESSING, 0000122982 515 W. APRA ST. RANCHO DOMINGUEZ, CA US, 90220 TEL: 310 604 8000 FAX: 310 604 9959 Class: A SUBCONTRACTORS Specification Controlled: PSPEC 436 HEAT TREATMENT OF HEAT RESISTING ALLOYS PSPEC 440 HEAT TREATMENT OF CORROSION RESISTANT STEELS PSPEC 509 BRAZING OF AUSTENITIC STEELS, ALUMINIUM ALLOYS & NICKEL ALLOYS BODYCOTE THERMAL PROCESSING INC., 0000100027 1019 MCLEAN BLVD. S. WICHITA, KS US, 67213-4524 TEL: 316 267 0239 FAX: 316 267 7904 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-14 HEAT TREATMENT OF STEELS BAPS 168-15 STRESS RELIEF OF METALS BAPS 168-19 CARBURIZING OF STEEL LES 1016 HEAT TREATMENT OF STEEL ALLOYS PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS PPS 30.06 PRECIPITATION HARDENABLE (PH) STAINLESS STEEL PPS 30.08 STEEL HEAT TREATMENT - MARTENSITIC STAINLESS STEEL BODYCOTE THERMAL PROCESSING INC., 0000107161 1009 SOUTH WEST ST. WICHITA, KS US, 67213-1627 TEL: 316 943 3288 FAX: 316 943 3025 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS LES 1051 HEAT TREAT OF ALUMINUM ALLOYS BODYCOTE WARMEBEHANDLUNG GMBH, 0000119726 HOLZENER 39 MENDEN, 01 DE, 58708 TEL: 00 49 2373 96... FAX: 00 49 2373 96 Class: A SUBCONTRACTORS Specification Controlled with Limitations: BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS BOEING, 0000114267 1901 OAKESDALE S. W. RENTON, WA US, 98055 TEL: 714 934 0377 FAX: 714 934 0398 Class: D DISTRIBUTOR BOEING AEROSTRUCTURE AUSTRALIA PTY, 0000118571 Class: Systems with Limitations: Page 161 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address 226 LORIMER ST. PORT MELBOURNE, VIC AU, 3207 TEL: 613 9647 3111 FAX: 613 9647 2253 Classification Learjet Approved Suppliers Scope of Approval A SUBCONTRACTORS 0000 GENERAL LIMITATION / REMARKS D DISTRIBUTOR Limitation: In accordance with FAA Repair Station Approval # E MAINTENANCE ORGANIZATION T0QY719Y Limitation: For the Challenger 300 APU Muffler Assy Part Number 1004984001-003 Limitation: This Approval will remain on Condition, pending amendment of the Limitation: Capability List Document No. Limitation: RS-FAA-003 to include the Repair of the APU Muffler Part Number Limitation: 1004984001-003RS. Limitation: Third party provider who partners with Bombardier regarding distribution activities for Limitation: Challenger 300 Tailcone and APU Installation Kit Limitation: Manufactured by Boeing Aerostructures Australia – Bankstown (Vendor Code 106225) Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2E MECHANICAL TESTING: PLASTICS, RUBBERS STATIC AND ELASTIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-4C TESTING OF THERMAL PROPERTIES (EXPANSIONS, Page 162 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TMA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAERD-GEN-018-5G PLASTICS, RUBBERS (FORMERLY 1D) BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY BOHLER EDELSTAHL GMBH, 0000121017 MARIAZELLER ST. 25 KAPFENBERG, ST AT, 8605 TEL: 43 0 386 2200 FAX: 43 0 386 2207 52 Class: C MANUFACTURER BOHLER SCHMIEDETECHNIK, 0000108503 MARIAZELLERSTRASSE 25 KAPFENBERG, ST AT, 8605 TEL: 3862 207124 FAX: 3862 2078 Class: C MANUFACTURER BOHLERBLECHE GMBH, 0000120904 BLECKMANNGASSE 10 MURZZUSCHLAG, ST AT, 8680 TEL: 41417261214 FAX: 41417261215 Class: C MANUFACTURER BOHNE SPRING INDUSTRIES LTD., 0000106805 60 CORONET ROAD ETOBICOKE, ON CA, M8Z 2M1 TEL: 4162319000-234 FAX: 416 231 5365 Class: A SUBCONTRACTORS BOISMAT INC., 0000109013 209 ROY ST-EUSTACHE, QC CA, J7R 5R5 Class: H COMMERCIAL OFF THE SHELF Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 833 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled with Limitations: BAPS 168-15 STRESS RELIEF OF METALS Page 163 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 450 472 3369 FAX: 450 472 3660 BOLLHOFF ARMSTRONG LIMITED, 0000122014 STONEFERRY BUSINESS PARK FOSTER ST. HULL, YK GB, HU8 8BT TEL: 0148 232 5425 FAX: 0148 232 7229 Class: C MANUFACTURER BOLTON AEROSPACE LTD., 0000108487 HADLEIGH ROAD IPSWICH, SK GB, IP2 0EG TEL: 1473 269509 FAX: 1473 218229 Class: C MANUFACTURER BOMBARDIER AEROSPACE MEXICO, 0000600321 RETORNO EL MARQUES #4 LOTE 7Y8 EL MARQUES, QRO MX, 76246 TEL: 1 (442) 226 7... FAX: Class: A SUBCONTRACTORS F STRUCTURAL SUPPLIER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limitation to: Limitation: Per BAQM Part III, Appendix C QD 4.6-40 is deferred for this Bombardier Supplier Facility. Limitation: Supplier surveillance will be performed per section 4.17 Internal Quality Audits of the BAQM. Specification Controlled: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS PPS 30.03 HEAT TREATMENT AND CONTROL OF 2024 (DD) RIVETS Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: > BJP-MM \BST-MM Jumper \ Straps . Limitation: > TUB-MM Tube Assemblies, Ferrules, Fittings . Limitation: > Preparation of the Tubing . BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING Limitation: For: INSTALLATION of WIRES and CABLES : Limitation: > Clearance from inflammable lines and Page 164 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval equipment Limitation: > Protection of wires and cables Limitation: > Routing and bundling of wires and cables Limitation: > Bend Radius Limitation: > Wire and cable support Limitation: > Junction Boxes Limitation: Limitation: For : INSTALLATION OF METALLIC and NON-METALLIC CONDUIT : Limitation: > Insertion of wires and cable Limitation: > Supports Limitation: > Flxible conduit Limitation: > Protective sleeves and wraps Limitation: > Bend radius Limitation: > Twisting Limitation: > Conduit Nuts Limitation: > Fasteners Limitation: Limitation: For : ELECTRICAL CONNECTIONS : Limitation: > Screws for electrical connections Limitation: > Washer for electrical connections Limitation: > Installation of Thermal blocks Limitation: > Installation of Crimped splices Limitation: > Installation of connector Assemblies Limitation: > Installation of thermal lugs to terminal block assemblies Limitation: > Ground Connections Limitation: > Stowage of electrical wiring and Connectors Limitation: > Soldering Limitation: > Installation of TMS-WM Material ( Heat Shrinkable Wraparound Material ) Limitation: > S-10155 Conduit Limitation: > Spot Tying Methods BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 2 using Alodine 1132 Touch and Prep Pen . BAPS 174-09 INSTALLATION OF WIGGINS TYPE COUPLINGS ON RIGID PLUMBING LINES Limitation: Limited to: Installation only of wiggins type flexible couplings hydraflow models FC511 & B0305072 as per Page 165 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval Section : 9.3.3 Requirements for flexible full BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: used of Cooling Media . BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS Limitation: Manual Processing ONLY . BAPS 185-02 SHOT PEENING OF METAL PARTS Limitation: Limited to: Section 9.4.4 Manual Peening. BOMBARDIER AEROSPACE NORTH AFRICA, 0000600670 BP.15-AEROPOLE AEROPORT CASABLANCA, MA MA, 20000 TEL: (212) 52 0206076 FAX: 514 855 5000 Class: F STRUCTURAL SUPPLIER BOMBARDIER AEROSTRUCTURE & SERVICES, 229-333 DOAGH ROAD BELFAST, BL GB, BT36 6XA TEL: 1-888-227-1355 FAX: 0000600696 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: For Bombardier use only BOMBARDIER AEROSTRUCTURES & ENG SER, 1800 MARCEL LAURIN ST-LAURENT, QC CA, H4R 1K2 TEL: 514 855 5001 FAX: 0000600521 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING BAPS 145-008 STOWAGE OF ELECTRICAL WIRING AND CONNECTORS BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 150-019 INSTALLATION OF COLD EXPANDED RIVETLESS NUT PLATES BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 155-074 STRUCTURAL ADHESIVE BONDED ASSEMBLIES FOR USE UP TO 180 DEGREE F (250 DEGREE F CURE) BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-27 INTEGRAL FUEL TANK SEALING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 157-32 HIGH TEMPARATURE SEALING FOR NON -FUEL TANK APPLICATIONS BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM Page 166 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval ALLOYS BAPS 160-32 SULFURIC ACID ANODIZING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 175-007 INSTALLATION OF THREADED RETAINER BEARINGS BAPS 176-019 EDDY CURRENT INSPECTION BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 176-17 RADIOGRAPHIC INSPECTION BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 185-02 SHOT PEENING OF METAL PARTS BAPS 186 CHEMICAL MILLING OF ALUMINUM BAPS 188-02 COLD WORKING OF HOLES BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS BAPS 260-010 MACHINING, FORMING AND PREPARATION OF NON-METALLIC HONEYCOMB CORE FOR LAY-UP IN SANDWICH COMPONENTS BAPS 260-012 MANUFACTURING OF STRUCTURAL COMPONENTS VIA AUTOMATED FIBER PLACEMENT (AFP) BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... BAPS 260-03 POTTING OF HONEYCOMB SANDWICH PANELS BOMBARDIER AVIATION SERVICE CENTERS, 0000600003 4100 11TH TERRACE S. W. FORT LAUDERDALE, FL US, 33315-3504 TEL: (954) 359-7887 FAX: 954 359-0516 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Limitation to : Limitation: FAA Repair Station Certificate # LN4R342M Limitation: EASA Approval Certificate EASA.145.4625 Limitation: Brasil Certificate 0002-05/DAC Limitation: Argentina Certificate # 1B-211 Limitation: Venezuela Certificate # 227 Limitation: South African Civil Aviation Authority Approval Number 907 Limitation: Bermuda Department of Civil Aviation no: BDA/AMO/119 Page 167 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address BOMBARDIER COMPLETION CENTER, 200 COTE-VERTU WEST DORVAL, QC CA, H4S 2A3 TEL: 514-420-4100 FAX: Classification 0000600035 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: For Bombardier use only BOMBARDIER DALLAS MRO, 0000126502 4039 ROCK QUARRY ROAD, SUITE 600 DALLAS, TX US, 75211 TEL: 214-331-9400 FAX: 214-331-9401 Class: A SUBCONTRACTORS BOMBARDIER FLIGHT TEST CENTER, ONE LEARJET WAY WICHITA, KS US, 67209-2924 TEL: 316 946 2000 FAX: Class: A SUBCONTRACTORS 0000600345 BOMBARDIER INC., MIRABEL TUBING CEN, 10200 IRENEE-VACHON MIRABEL, QC CA, J7N 3E3 TEL: 450-476-0550 FAX: 450-476-0560 0000600445 Scope of Approval Class: A SUBCONTRACTORS Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-27 INTEGRAL FUEL TANK SEALING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 174-09 INSTALLATION OF WIGGINS TYPE COUPLINGS ON RIGID PLUMBING LINES BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES BAPS 174-18 INSTALLATION OF DEUTSCHLITE DPL SERIES FITTINGS BAPS 174-19 ASSEMBLY AND INSTALLATION OF MINIATURE END SWAGED FITTINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-040 AQUEOUS DEGREASING BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Specification Controlled with Limitations: Page 168 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to 5XXX and 6XXX Aluminium alloy BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Touch N Prep 1132, limited to 2xxx, 5xxx and 6xxx BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: Furnace HT-1 (Sol. anneal & aging), HT-2 (Aging only) BAPS 172-34 FUSION WELDING Limitation: Limited to mat'l group: IB(4130 only),IIA,IIB ,IIIA , IV & VI. BAPS 174-16 ASSEMBLY AND INSTALLATION OF SIERRACIN/HARRISON SLEEVES AND UNIONS ON PLUMBING LINES Limitation: Triple Groove Swage only BOMBARDIER SERVICES CORP., 0000600017 2400 AVIATION WAY BRIDGEPORT, WV US, 26330-9729 TEL: 304 848 5133 FAX: 304 848 5165 Class: E MAINTENANCE ORGANIZATION BOMBARDIER TRANSPORTATION, 0000600178 CORREDOR INDUSTRIAL SN SAHAGUN, HGO MX, 43998 TEL: 791 913 8700-... FAX: 791 913 87 20 Class: A SUBCONTRACTORS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: BAPS 132-03 SWAGING OF TUBES BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 174-09 INSTALLATION OF WIGGINS TYPE COUPLINGS ON RIGID PLUMBING LINES BAPS 174-14 ASSEMBLY AND INSTALLATION OF GAMAH FLEXABLE CONNECTORS ON PLUMBING LINES BAPS 174-16 ASSEMBLY AND INSTALLATION OF SIERRACIN/HARRISON Page 169 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval SLEEVES AND UNIONS ON PLUMBING LINES BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY PPS 06.14 ASSEMBLY OF WIGGINS SWAGED CONNECTORS PPS 20.03 PENETRANT FLAW DETECTION PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.05 SURFACE TREATMENTS OF CORROSION RESISTANT STEELS PPS 31.07 CLEANING AND STRIPPING OF PAINTED SURFACES PPS 32.01 CROMATE CONVERSION COATING Specification Controlled with Limitations: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION Limitation: BT Mexico's captive laboratory approval for testing per Field 1b Treatment solutions and Limitation: waters BAPS 172-34 FUSION WELDING Limitation: Approval limited to Base Metal Group IB, IIA and IV. BAPS 174-08 ASSEMBLY AND INSTALLATION OF FLARELESS FITTINGS ON PLUMBING LINES Limitation: Installation of Flareless fitting approval for tubes .25 to .625 dia made of 5052 Aluminum, Limitation: 6061 Aluminum and CRES 18-8 (MIL-T-8808). BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Limitation: Limited approval for Type 1 Method A and Type 1 Method C PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) Limitation: Limited to F24 Type 4 Top Coat Enamel Application Only PPS 34.08 EPOXY PRIME Limitation: Limited to F19 Type 2 Primer Application Only BOS - ODEM LTD., 20 FREIMAN ST. 0000128758 Class: D DISTRIBUTOR Page 170 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval RISHON LE ZION, 06 IL, 75100 TEL: 972 3 9540000 FAX: 972 3 9660345 BOSCH REXROTH CANADA CORP., 0000130796 725 RUE DELAGE LONGUEUIL, QC CA, J4G 2P8 TEL: 450 928 1111 FAX: 450 928 0903 Class: H COMMERCIAL OFF THE SHELF BOSCH SECURITY SYSTEMS INC., 0000100039 8601 E. CORNHUSKERS HWY. LINCOLN, NE US, 68507 TEL: 585-678-3321- FAX: 800-955-6831 Class: B EQUIPMENT SUPPLIERS BOSE CORP., 0000129300 2000 CAROLINA PINES DR. BLYTHWOOD, SC US, 92016 TEL: 508 766 4075 FAX: 508 766 4134 Class: H COMMERCIAL OFF THE SHELF BOSE CORP., 0000103301 145 PENNSYLVANIA AVE. FRAMINGHAM, MA US, 01701-8850 TEL: 800 766 8452 FAX: 508 766 4134 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods BOSTIK CANADA LTD., 0000109102 8298 BLVD. PIE-IX MONTREAL, QC CA, H1Z 4E8 TEL: 514 593 0418-226 FAX: 514 593 0413 Class: D DISTRIBUTOR BOSTIK INC., 0000136339 211 BOSTON STREET MIDDLETON, MA US, 01949 TEL: 414 774 2250-... FAX: 414 774 8075 Class: C MANUFACTURER BOTANY WEAVING MILL, Class: 0000136832 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 171 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification VAUXHALL AVENUE, CORK STREET DUBLIN, DB IE, D8 TEL: 353 0 1 4544428 FAX: 353 0 1 454442 B EQUIPMENT SUPPLIERS BOURNS INC., 0000104879 1200 COLUMBIA AVE. RIVERSIDE, CA US, 92507-2129 TEL: 909 781 5690 FAX: 909 781 5273 Class: C MANUFACTURER BOW SOLDER PRODUCTS CO. INC., 0000108322 1 CROSSMAN ROAD SAYREVILLE, NJ US, 08872 TEL: 732 316 2100 FAX: 732 316 1185 Class: C MANUFACTURER BOWMAN INTERNATIONAL LTD, 0000130974 10 ISIS COURT, WYNDYKE, FURLONG ABINGDON, OX GB, OX14 1DZ TEL: 01235 462500 FAX: 01235 462500 Class: A SUBCONTRACTORS BOWMAN PLATING CO. INC., 0000108147 2631 E. 126TH ST. COMPTON, CA US, 90222-1511 TEL: 310 639 4343 FAX: 310 639 3577 Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM- Manufacturer code 70 Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-23 HARD ANODIZING OF ALUMINUM ALLOYS BAPS 160-32 SULFURIC ACID ANODIZING BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 161-007 APPLICATION OF MIL-L-46010 SOLID FILM LUBRICANT BAPS 161-008 APPLICATION OF MIL-81329 SOLID FILM LUBRICANT BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT Page 172 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS MPS 160-08 CADMIUM PLATING OF CARBON AND LOW ALLOY STEELS BELOW 220,000PSI, COPPER ALLOYS AND CRES STEELS PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.03 PRE CLEANING OF STEELS PPS 31.05 SURFACE TREATMENTS OF CORROSION RESISTANT STEELS PPS 31.07 CLEANING AND STRIPPING OF PAINTED SURFACES PPS 31.09 CLEANING OF TITANIUM PPS 31.12 CLEANING NICKEL AND NICKEL ALLOYS PPS 32.01 CROMATE CONVERSION COATING PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 32.04 HARD ANODIZING (A2) PPS 32.05 SULPHURIC ACID ANODISING PPS 32.09 APPLICATION OF DRY FILM LUBRICANTS (C3, C7 AND C8) PPS 33.01 CADMIUM PLATING (E1) PPS 33.02 STRIPPING PF PLATING PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PSPEC 300 PENETRANT FLAW DETECTION PSPEC 301 MAGNETIC PARTICLE INSPECTION PSPEC 410 CHROMIC ACID ANODISING PSPEC 411 SULPHURIC ACID ANODISING PSPEC 416 PASSIVATION OF AUSTENITC, MARTENSITIC AND PH STEELS PSPEC 419 CHEMICAL CONVERSION COATING OF ALUMINIUM AND ALUMINIUM ALLOYS PSPEC 430 HARD ANODISING Page 173 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PSPEC 910 ETCH AND EPOXY PRIMING Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to surface preparation of parts only. PPS 30.12 STEEL HEAT TREATMENT - GENERAL Limitation: Supplier is performing stress relief after hard anodizing only; Supplier is not a HT processor. BOYSEN GMBH & CO. KG, 0000106806 STAHLGRUBERRING 49 MUNCHEN, 09 DE, 81829 TEL: 89 42 74 21 0 FAX: 89 42 74 21 40 Class: C MANUFACTURER BP EUROPA SE, 0000132653 ERKELENZER SRABE 20 MONCHENGLADBACH, 05 DE, 41179 TEL: 49 2161 909 30 FAX: 49 2161 909 400 Class: C MANUFACTURER BP FRANCE, 0000133307 38 RUE DE L'INDUSTRIE, USINE DE PERONNE PERONNE, 02 FR, 80209 TEL: 34 22 40 00 FAX: 34 22 44 17 Class: C MANUFACTURER BRADFORD INDUSTRIES, 0000125670 75 ROGERS ST. LOWELL, MA US, 01852-3617 TEL: 978 459 4100-331 FAX: 978 459 2597 Class: C MANUFACTURER BRADY WORLDWIDE INC., 0000129384 6555 WEST GOOD HOPE ROAD MILWAUKEE, WI US, 53223 TEL: 414 358 6928 FAX: 999 999 9999 Class: C MANUFACTURER BRADY WORLDWIDE INC., 2230 W. FLORIST AVE. Class: C MANUFACTURER 0000107852 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to Pyrotarp epoxy liquid PTL333C Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 174 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification GLENDALE, WI US, 53209 TEL: 905 764 1717 FAX: 905 764 5557 Scope of Approval Limitation: SEE EMCM # 770 & 787 BRALCO METALS, 0000101509 15090 NORTHAM ST. LA MIRADA, CA US, 90638-5757 TEL: 800 628 1864 FAX: 714 736 4850 Class: D DISTRIBUTOR BRALCO METALS INC., 0000101026 3400 TOPEKA AVE. N. WICHITA, KS US, 67219-3640 TEL: 316-201-9019 FAX: 316 838 9230 Class: A SUBCONTRACTORS D DISTRIBUTOR BRAMPTON PROCESSING, 0000107713 171 ADVANCE, UNITS 19 & 20 BRAMPTON, ON CA, L6T 4Z6 TEL: 905 791 9634-103 FAX: 905 791 4089 Class: A SUBCONTRACTORS Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-09 CHROMIUM PLATING OF STEELS HEAT TREATED TO LESS THAN 220,000 PSI AND COPPER ALLOYS BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Page 175 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 168-15 STRESS RELIEF OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-11 CLEANING AND DEOXIDIZING COPPER AND COPPER ALLOYS BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS CAPTIVE LABORATORY MPS 160-08 CADMIUM PLATING OF CARBON AND LOW ALLOY STEELS BELOW 220,000PSI, COPPER ALLOYS AND CRES STEELS MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.05 SURFACE TREATMENTS OF CORROSION RESISTANT STEELS PPS 31.09 CLEANING OF TITANIUM PPS 32.01 CROMATE CONVERSION COATING PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 32.05 SULPHURIC ACID ANODISING PPS 32.35 CHEMICAL CONVERSION COATING FOR LOW ELECTRICAL RESISTANCE (C10) PPS 33.01 CADMIUM PLATING (E1) PPS 33.04 HARD CHROMIUM PLATE PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PPS 34.16 APPLICATION OF EPOXY-AMINE, URETHANE COMPATIBLE, INTERMEDIATE PRIMER (F23) Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Paint Oven #5 at a nominal operating temperature Page 176 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval of 130°F (≈ 54.4°C), per sub-specification Limitation: BAERD GEN-007 Class 15 Type C. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: limited to type 2 and certified operators BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Limitation: Chemical processing line A. MPS 250-201 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES AEROSPATIALE A330/A340 PROGRAM Limitation: limited to ink marking only PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS Limitation: Baking and stress relieve operations only. PPS 30.06 PRECIPITATION HARDENABLE (PH) STAINLESS STEEL Limitation: Baking and stress relieve operations only. PPS 32.35 CHEMICAL CONVERSION COATING FOR LOW ELECTRICAL RESISTANCE (C10) BRANDOFLEX LTD., 0000107714 15 MORTON AVE. E. BRANTFORD, ON CA, N3R 6C3 TEL: 519 752 2584 FAX: 519 752 4646 Class: A SUBCONTRACTORS C MANUFACTURER BRC BEARING CO., 0000107569 720 WASHINTON N. WICHITA, KS US, 67214 TEL: 316 265 0668 FAX: 316 264 6558 Class: D DISTRIBUTOR BRENNTAG CANADA INC., 0000107418 2900 JEAN-BAPTISTE-DESCHAMPS LACHINE, QC CA, H8T 1C8 TEL: 514 636 9230 FAX: 514 636 8229 Class: D DISTRIBUTOR BREYDEN PRODUCTS INC., 0000137308 4532 EAST PARK 30 DRIVE COLUMBIA CITY, IN US, 46725 TEL: 514 855 5000 FAX: 514 855 5000 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: BAS67039312-xx, BAS67039302-xx , 85230529-101, 85332632-101, 85332633-101 Page 177 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification BRIDPORT ERIE AVIATION, INC., 0000109130 2220 EAST CERRITOS AVE. ANAHEIM, CA US, 92806 TEL: 814 833 6767 FAX: 814 833 3358 Class: B EQUIPMENT SUPPLIERS BRIGHT LIGHTS USA INC., 0000121024 145 SHREVE AVE. BARRINGTON, NJ US, 08007-1501 TEL: 856 546 5656 FAX: 856 546 9191 Class: C MANUFACTURER BRISTOL INDUSTRIES, 0000103257 630 E. LAMBERT ROAD BREA, CA US, 92821-4119 TEL: 714 990 4121 FAX: 714 529 6726 Class: C MANUFACTURER BRITISH FELT CO., 0000122784 5 FINGLE DRIVE, STONEBRIDGE MILTON KEYNES, BU GB, MK13 OAT TEL: 0 1908 320329 FAX: 0 1908 226599 Class: C MANUFACTURER BRITTAIN MACHINE INC., 0000101080 2520 S. SHERIDAN WICHITA, KS US, 67217-1340 TEL: 3166163109 FAX: 316 942 5081 Class: A SUBCONTRACTORS BROADWAY ENGINEERING LTD., 0000109913 KNAPPS LANE FISHPONDS TRADING ESTAT ST-GEORGE, BR GB, BS5 7UH TEL: 0117 9657585 FAX: 0117 9584081 Class: A SUBCONTRACTORS BROMFORD INDUSTRIES LIMITED, 0000136088 PEGASUS HOUSE, BROMFORD GATE, BROMFORD L Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to part no . XS-99522-30-1 Plug button Specification Controlled: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS LES 1014 WELDING, FUSION FERROUS METALS Page 178 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval ERDINGTON, BIRMINGHAM, WM GB, B24 8DQ TEL: 44 0 121 683 ... FAX: 514 855 5000 BRP MANUFACTURING, 0000106814 637 N. JACKSON ST. LIMA, OH US, 45801-4125 TEL: 419 228 4441 FAX: 419 222 5010 Class: C MANUFACTURER BRUCE AEROSPACE INC., 0000101947 101 EVANS AVE. DAYTON, NV US, 89403-8306 TEL: 775 246 0101-447 FAX: 775 246 0451 Class: C MANUFACTURER BRUNSON INSTRUMENT CO. INC., 0000107568 8000 E.23RD ST. KANSAS CITY, MO US, 64129-1357 TEL: 816 483 3187 FAX: 816 241 1945 Class: B EQUIPMENT SUPPLIERS BRUNTONS AERO PRODUCTS, 0000101616 BLOCK 1, UNITS 1-3 MUSSELBURGH, LT GB, EH21 7PA TEL: 1316 653888 FAX: 1316 532236 Class: A SUBCONTRACTORS BRYCE INDUSTRIES INC., 0000108114 2266 DREW ROAD, UNIT 7 MISSISSAUGA, ON CA, L5S 1B1 TEL: 905 678 1548 FAX: 905 678 1659 Class: D DISTRIBUTOR BUCHER AEROSPACE CORPORATION, 0000135199 1310 INDUSTRY ST., SUITE 100 EVERETT, WA US, 98203 TEL: 425-366-4022 FAX: 425-355-2204 Class: B EQUIPMENT SUPPLIERS BUCKLEY INDUSTRIES INC., Class: 0000100882 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM code 74 Specification Controlled: PPS 03.02 SWAGING STRAIGHT SHANK TERMINALS PPS 03.04 SWAGING OF BALL TERMINALS PPS 03.05 PROOF LOADING CABLE AND CHAIN ASSEMBLIES Page 179 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 1850 53RD ST. N. E. WICHITA, KS US, 67219-2630 TEL: 316 744 7587 FAX: 316 744 8463 A SUBCONTRACTORS D DISTRIBUTOR BUD INDUSTRIES INC., 0000119082 4605 E. 355TH ST. WILLOUGHBY, OH US, 44094-4629 TEL: 440 946 3200 FAX: 440 951 4015 Class: H COMMERCIAL OFF THE SHELF BUD'S DRAPERY DEN INC., 0000104808 4766 E. SPEEDWAY TUCSON, AZ US, 85712-4731 TEL: 520 327 0123 FAX: 520 325 8558 Class: H COMMERCIAL OFF THE SHELF BULWELL PRECISION ENGINEERS LTD., 0000109916 WHARF ROAD INDUSTRIAL ESTATE PINXTON, NT GB, NG16 6LE TEL: 01773 810102 FAX: 01773 861644 Class: A SUBCONTRACTORS C MANUFACTURER BUNTING BEARINGS CORP., 0000108824 4252 E. KILGORE ROAD PORTAGE, MI US, 49002-1910 TEL: 616 345 8691 FAX: 616 345 0931 Class: C MANUFACTURER BUNTING BEARINGS CORP., 0000109042 1001 HOLLAND PARK BLVD. HOLLAND, OH US, 43528-9287 TEL: 419 866 7000 FAX: 419 866 0653 Class: C MANUFACTURER BURNDY LLC, 0000130461 47 E. INDUSTRIAL PARK DR. MANCHESTER, NH US, 03109 Class: C MANUFACTURER Learjet Approved Suppliers Scope of Approval Specification Controlled: BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION PSPEC 300 PENETRANT FLAW DETECTION PSPEC 301 MAGNETIC PARTICLE INSPECTION Page 180 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 800 346 4175 FAX: 800 346 9826 BURULAN, 0000127611 C / CONCEJO, NO. 7 VITORIA, 01 ES, 01013 TEL: 945 28 67 86 FAX: 945 26 39 03 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-27 INTEGRAL FUEL TANK SEALING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Accelerated curing at 60 degC (140 degF) for BAMS 565-001, BAMS 565-002 & BAMS 565Limitation: 010 BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limited to ink marking ONLY BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to Type 2: Manual Application with the Prep Pen 1132 only. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to Type 2: Manual Application with the Prep Pen 1132 only. Page 181 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification BUTLER INC., 0000106818 1600 166TH ST. W. GARDENA, CA US, 90247-4704 TEL: 310 323 3114 FAX: 310 324 0914 Class: C MANUFACTURER BYTEST S.R.L., 0000135622 VIA PISA, 12 VOLPIANO, TO IT, 10088 TEL: 011 995 3845 FAX: 011 995 3853 Class: A SUBCONTRACTORS C & D ZODIAC INC., 0000131491 2850 SKYWAY DR. SANTA MARIA, CA US, 93455 TEL: 805-406-7344 FAX: 805 349 2558 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION C & D ZODIAC, INC., 0000108130 AV. PACIFICO NO. 14634 TIJUANA, BC MX, 22670 TEL: 664 626 0555 FAX: 664 626 0566 Class: B EQUIPMENT SUPPLIERS C & F MILLIER LTD., 0000121082 272 SOUTHMEAD ROAD WESTBURY-ON-TRYM, BR GB, BS10 5EW TEL: 117 9505252 FAX: 0117 9508969 Class: A SUBCONTRACTORS C & K SWITCH PRODUCTS, 0000106820 15 RIVERDALE AVE. NEWTON, MA US, 02458-1057 TEL: 617-926-3700 FAX: 617 926 6947 Class: B EQUIPMENT SUPPLIERS C & LEE INC., 0000134579 263 NAECHUK-RO, CHUKDONG-MYUN SACHEON, 05 KR, 664-820 Class: A SUBCONTRACTORS Scope of Approval Specification Controlled: BAPS 176-17 RADIOGRAPHIC INSPECTION Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Type II BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Page 182 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification TEL: 82 10 6688 0233 FAX: 514 855 5000 Scope of Approval Limitation: Manual application BAPS 157-27 INTEGRAL FUEL TANK SEALING Limitation: Wet installation of fasteners and Sealing of fasteners BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Wet installation of fasteners and fasteners seal for nutplates installation BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type II BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS Limitation: Class B&C BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... Limitation: Class B&C C & M MARINE AVIATION SERVICES, INC, 0000116398 9200 KING ARTHUR DR. DALLAS, TX US, 75247 TEL: 214 654 9270-302 FAX: 214 654 9119 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS C&D AEROSPACE CANADA CO., 0000110291 18107 TRANS-CANADA KIRKLAND, QC CA, H9J 3K1 TEL: 514-697-5555-... FAX: 514-693-5477 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: BAPS 710-001 INTERIOR AIRCRAFT, VARNISH APPLICATION Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: for Interior only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: for Interior only BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: for non-instrusive only BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: METAL-METAL BONDS: [BJP-MM /BST-MM] Jumpers / Straps, [GND-MM] Grounding Studs, [GND-MM01] Ground Return & [GND-MM02] Heavy-Duty Ground Return. Page 183 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING Limitation: Aircraft Interior wiring installations. BAPS 145-004 INSTALLATION OF MECHANICALLY ATTACHED TERMINALS Limitation: Aircraft Interior wiring installations. BAPS 145-005 IDENTIFICATION OF ELECTRICAL WIRING Limitation: Aircraft Interior wiring installations. BAPS 145-006 TERMINATION OF THE SHIELD ON SHIELDED WIRE AND CABLE Limitation: Aircraft Interior wiring installations. BAPS 145-008 STOWAGE OF ELECTRICAL WIRING AND CONNECTORS Limitation: Aircraft Interior wiring installations. BAPS 145-277 ACCEPTANCE TEST PROCEDURE (ATP) REQUIREMENTS FOR ELECTRICAL WIRING HARNESSES Limitation: Aircraft Interior wiring installations. BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: to manual installation only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Touch-up application only. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Touch-up application only BAPS 172-012 Limitation: Electrical and Electronic Parts. BAPS 260-03 POTTING OF HONEYCOMB SANDWICH PANELS Limitation: CLASS II ONLY C&D ZODIAC, 0000130776 11240 WARLAND DR. CYPRESS, CA US, 90630 TEL: 657 227 5622 FAX: 714 891 8166 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION C&D ZODIAC EUROPE, 0000122182 12 RUE JEAN MERMOZ COLOMIERS, 31 FR, 31770 TEL: 561 15 36 78-... FAX: 561 15 41 29 Class: E MAINTENANCE ORGANIZATION C&D ZODIAC INC., 5701 BOLSA AVE. Class: B EQUIPMENT SUPPLIERS 0000108294 Systems with Limitations: 2101 MRB APPROVAL - MINOR ONLY Page 184 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval HUNTINGTON BEACH, CA US, 92647-2063 TEL: 562-344-4876 FAX: 714-934-0088 E MAINTENANCE ORGANIZATION Limitation: CRJ-200/-700/-900, DASH8, GX & GX-5000 C&D ZODIAC INC., 0000120797 7330 LINCOLN WAY GARDEN GROVE, CA US, 92841-1427 TEL: 714-482-5486 FAX: 714 891 8166 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION C&D ZODIAC INC., 0000106819 2641 AIRPARK DR. SANTA MARIA, CA US, 93455-1415 TEL: 805 406 7329 FAX: 805 349 2558 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION C&L AEROSPACE, 0000108837 189 ODLIN ROAD BANGOR, ME US, 04401-6703 TEL: 207 217 6050 FAX: 207 945 0992 Class: E MAINTENANCE ORGANIZATION C-CON INC., 0000107573 1351 TI BLVD., UNIT 113 RICHARDSON, TX US, 75081-4890 TEL: 972 690 0024 FAX: 972 690 0034 Class: A SUBCONTRACTORS C. E. CONOVER & CO. INC., 0000101488 4106 BLANCHE ROAD BENSALEM, PA US, 19020-4430 TEL: 215 639 6666 FAX: 215 639 1799 Class: C MANUFACTURER C.A.M. S.R.L., 0000124093 S.S. APPIA, KM237 PAOLISI, BN IT, 82011 TEL: 082 395 1523 FAX: 082 395 9989 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) Page 185 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS BAPS 188-08 MACHINING OF COMPOSITES BAPS 260-03 POTTING OF HONEYCOMB SANDWICH PANELS CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 260-010 MACHINING, FORMING AND PREPARATION OF NON-METALLIC HONEYCOMB CORE FOR LAY-UP IN SANDWICH COMPONENTS Limitation: to Class B & Class C cores for autoclave cure only. BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... Limitation: Autoclaves # 1 & #3 only C.E. MACHINE CO. INC., 0000128755 1741 S. HOOVER CT. WICHITA, KS US, 67209 TEL: 316 942 0411 FAX: 316 942 0011 Class: A SUBCONTRACTORS C.R. DANIELS INC., 0000108762 3451 ELLICOTT CENTER DR. ELLICOTT CITY, MD US, 21043-4112 TEL: 410 461 2100 FAX: 410 461 2987 Class: C MANUFACTURER C.U.E. INC., 0000119357 11 LEONBERG ROAD CRANBERRY TWP., PA US, 16066-3601 TEL: 800-283-4621 FAX: 724-772-5280 Class: C MANUFACTURER CABLECRAFT MOTION CONTROLS, 0000101400 4401 S. ORCHARD ST. TACOMA, WA US, 98466-6619 TEL: 253 671 3257 FAX: 253 474 1623 Class: B EQUIPMENT SUPPLIERS CABLECRAFT MOTION CONTROLS, 2110 SUMMIT ST. NEW HAVEN, IN Class: C MANUFACTURER 0000107493 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 186 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 46774-9524 TEL: 260 749 5105 FAX: 260 493 2387 CABLETEC, 0000117690 SUNNY SIDE ROAD WESTON SUPER MARE, SO GB, BS23 3PZ TEL: 01934 635226 FAX: 01934 636632 Class: C MANUFACTURER CABOT CARBON LTD., 0000108491 SULLY MOORS ROAD SULLY, MG GB, CF64-5RP TEL: 6736 999 FAX: 6737 129 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM #813 CABOT CORP. FUMED METAL OXIDES, 0000106823 700 E.U.S. HWY. 36 TUSCOLA, IL US, 61953-7520 TEL: 217 253 3370 FAX: 217 253 4334 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM 080 CADENA ENTERPRISES INC., 0000110446 15261 CAPITAL PORT SAN ANTONIO, TX US, 78249 TEL: 210 493 0217 FAX: 210 492 5932 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods CAIG LABS. INC., 0000123336 12200 THATCHER CT. POWAY, CA US, 92064-6876 TEL: 858 486 8388 FAX: 858 486 8398 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: limited to product Deoxit Shield S5L to cover requirement in Alert Service Bulletin A601r-27Limitation: 152 CALIFORNIA DROP FORGE, INC, 0000107576 1033 ALHAMBRA AVE. LOS ANGELES, CA US, 90012-2929 TEL: 323 221 1134-226 FAX: 323 223 7853 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Specification Controlled: LES 1004 PENETRANT INSPECTION LES 1006 INSPECTION, MAGNETIC PARTICLE Page 187 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification CALIFORNIA SCREW PRODUCTS, 0000106827 14957 GWEN CHRIS AVE. PARAMOUNT, CA US, 90723-3423 TEL: 562 633 6626 FAX: 562 633 2082 Class: C MANUFACTURER CAM-TAG INDUSTRIES INC., 0000106828 2783 FENTON ROAD GLOUCESTER, ON CA, K1T 3T8 TEL: 613 822 1921-... FAX: 613 822 2874 Class: A SUBCONTRACTORS Scope of Approval Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 185-000 GRINDING OF STEEL PARTS MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: For Acrylic Plastic parts Limitation: For Special bolts and screws Limitation: For Parts immersed or exposed to skydrol or fuel. Limitation: Electrochemical Etch Marking of Steels BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to assemble, prepare surface only, not authorize to test resistance BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: limiited to Method 1 BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to manual installation only BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: INSTALLATION OF BUSHINGS - NO HEATING REQUIREMENT MPS 250-201 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES AEROSPATIALE A330/A340 PROGRAM Limitation: Limited to Non-Instrusive Marking method only. CANADA METAL LTEE., 8271 LAFRENAIE 0000106832 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 188 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification ST-LEONARD, QC CA, H1P 2B1 TEL: 514 327 2011 FAX: 514 327 2568 C MANUFACTURER CANADIAN PLASTICS GROUP LTD., 0000101810 265 PONY DR. NEWMARKET, ON CA, L3Y 7B5 TEL: 905 715 7826-312 FAX: 905 715 7763 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS Learjet Approved Suppliers Scope of Approval Specification Controlled: PPS 10.08 FORMING THERMOPLASTIC SHEET PPS 10.12 POTTING OF A/C PARTS & ASSEMBLIES PPS 10.17 MACHINING OF PLASTICS PPS 10.22 PREPARATION OF MOLDS PPS 25.08 EC-1099 ADHESIVE PPS 25.14 GENERAL ELECTRIC PSA529/SRC-18 SILICONE BASE ADHESIVE PPS 25.23 EC-1300 ADHESIVE PPS 25.31 BONDING USING BOSTIK / BOSCODUR ADHESIVE PPS 25.50 RTV SILICONE ADHESIVES PPS 25.52 EC-2216 B/A GREY ADHESIVE PPS 25.55 EC-1357N ADHESIVE Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Ink Marking Process, permissible to use Imaje 5135 E with the following restrictions: Limitation: - Temporary marking only Limitation: - Not allowed on titanium or bare steel Limitation: - Permissible on aluminum alloys, and primed or topcoated surfaces Limitation: - Can not be used when BAPS 144-005 or other Engineering or Methods documents require Limitation: the marking to be over coated with BAMS 565-002 clear. CANAFLEX INC., 0000106838 1945 HYMUS DORVAL, QC CA, H9P 1J8 TEL: 514 636 9554 FAX: 514 636 3255 Class: H COMMERCIAL OFF THE SHELF CANAGROSA, 0000116479 EDIFICIO IZPAL, NAVE NO 1 (MANZANA 8A) P.I. LA NEGRILLA, 41 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. Page 189 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification ES, 41016 TEL: 954 25 88 78 FAX: 954 618 715 Learjet Approved Suppliers Scope of Approval BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS Specification Controlled with Limitations: BAERD-GEN-018-5A CORROSION TESTING CANREP INC., 0000102946 12900 BRAULT MIRABEL, QC CA, J7J 1P3 TEL: 450 434 9898 FAX: 450 434 6996 Class: D DISTRIBUTOR CANSEW INC., 0000110448 111 CHABANEL ST. W. MONTREAL, QC CA, H2N 1C9 TEL: 514 382 2807 FAX: 514 385 5530 Class: H COMMERCIAL OFF THE SHELF CANTWELL CULLEN & CO., 0000101636 1131 S. SERVICE ROAD W. OAKVILLE, ON CA, L6L 6K4 TEL: 9058253255-232 FAX: 905 825 0757 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS C MANUFACTURER D DISTRIBUTOR CANTWELL CULLEN HYDRAULIC DIV., 0000107217 10 ARTISANS CRES. LONDON, ON CA, N5V 4N6 TEL: 519 659 1107 FAX: 519 659 3844 Class: C MANUFACTURER D DISTRIBUTOR CAPARO DYNAMICS, 0000126000 PO BOX 36 CORNGREAVES ROAD CRADLEY HEATH, WM GB, B64 7DQ Class: C MANUFACTURER Page 190 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 01384 563 219 FAX: 01384 563 225 CAPLUGS, 0000103721 2150 ELMWOOD AVE. BUFFALO, NY US, 14207-1910 TEL: 716-876-9855 FAX: 716 874 1680 Class: C MANUFACTURER CAPPS MFG. INC., 0000101251 2121 EDWARDS S. WICHITA, KS US, 67213-1868 TEL: 316 942 9351 FAX: 316 942 6771 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS LES 1002 BRAZING OF SILVER & COPPER LES 1004 PENETRANT INSPECTION LES 1014 WELDING, FUSION FERROUS METALS LES 1015 WELDING FUSION, ALUMINUM ALLOYS LES 1033 ELECTRICAL BONDING LES 1039 SEALING- INTEGRAL FUEL TANKS, PRESSURE CABIN & FIREWALL LES 1047 CHEMICAL FILM TREATMENT, APPLICATION OF - ALUMINUM ALLOYS LES 1051 HEAT TREAT OF ALUMINUM ALLOYS LES 1079 EPOXY FINISH, FUEL RESISTANT, APPLICATION OF Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limitation: Limited to Manual Riveting ONLY BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Page 191 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Limitation: Limited to Type 2 Application CARLISLE INTERCONNECT TECHNOLOGIES, 5300 W. FRANKLIN DR. FRANKLIN, WI US, 53132-8642 TEL: 414 377 8797 FAX: 414 421 5301 0000101225 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER CARLISLE INTERCONNECT TECHNOLOGIES, 102 W. JULIE DR. TEMPE, AZ US, 85283-2868 TEL: 480 730 5700 FAX: 480 730 5800 0000103060 Class: C MANUFACTURER CARLISLE INTERCONNECT TECHNOLOGIES, 7911 S 188TH ST STE 100T KENT, WA US, 98032 TEL: 4256565206 FAX: 4252518826 0000130350 Class: C MANUFACTURER CARLISLE INTERCONNECT TECHNOLOGIES, 100 TENSOLITE DR. STE-AUGUSTINE, FL US, 32092 TEL: 800-458-9960 FAX: 904-829-3447 0000114391 Class: C MANUFACTURER CARLISLE INTERCONNECT TECHNOLOGIES,, 0000108821 1195 BLVD. LUIS DONALDO COLOSIO M., COLO NOGALES, SON MX, 84048 TEL: 52631314105 FAX: 526313146104 Class: C MANUFACTURER CARLTON FORGE WORKS, 0000108326 15346 VERMONT AVE. PARAMOUNT, CA US, 90723-4225 TEL: 562 633 1131 FAX: 562 531 8896 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Trent 700 engine ring forging (part number SJ30210). CAROLINA NARROW FABRIC CO., 1100 PATTERSON AVE. WINSTON-SALEM, NC Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to AMS 3902 , cloth organic fibre. See 0000123338 Page 192 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification US, 27101-1530 TEL: 336-631-3000 FAX: 336-631-3060 Scope of Approval EMCM # 1024 CARP INDUSTRIES CORP., 0000101894 4550 U.S. HWY. 1 GRANT, FL US, 32949-4909 TEL: 321 952 1303 FAX: 321 951 7590 Class: B EQUIPMENT SUPPLIERS D DISTRIBUTOR CARPENTER TECHNOLOGY CANADA LTD., 0000106842 6114 EDWARDS BLVD. MISSISSAUGA, ON CA, L5T 2V7 TEL: 800 268 4740 FAX: 905 564 1909 Class: C MANUFACTURER CARPENTER TECHNOLOGY CORP., 0000108327 101 BERN ST. W. READING, PA US, 19601-1203 TEL: 610 208 2000 FAX: 610 208 3364 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Limitation: SEE EMCM Limitation: EMCM_ Approved manufacturer # 91 CARPENTER TECHNOLOGY CORP., 0000107441 205 TALLEY METALS LANE MCBEE, SC US, 29101 TEL: 800 334 8324 FAX: 610 736 8154 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 881 CARPENTER TECHNOLOGY CORPORATION, 0000108683 2626 LIGONIER ST. LATROBE, PA US, 15650-3246 TEL: 724-532-6449 FAX: 724 532 6316 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM CARR LANE MFG. CO., 0000101738 4200 CARR LANE CT. ST-LOUIS, MO US, 63119-2129 TEL: 314 647 6200 FAX: 314 647 5736 Class: C MANUFACTURER D DISTRIBUTOR CARRIER & CO. INC., Class: 0000122163 Page 193 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 199 DE LA ROTONDE # 108 ILE DES SOEURS, QC CA, H3E 0C1 TEL: 514 333 3333 FAX: 514 933 0100 H COMMERCIAL OFF THE SHELF CARSTEN DAUS CBS, 0000116160 FRIEDBERGER STR. 35 HANAU, 06 DE, 63452 TEL: 6181 3040818 FAX: 6181 3040885 Class: C MANUFACTURER CARTRIDGE ACTUATED DEVICES INC., 0000103222 51 DWIGHT PLACE FAIRFIELD, NJ US, 07004-3311 TEL: 973 575 1312-132 FAX: 973 575 6039 Class: C MANUFACTURER CARY PRODUCTS CO. INC., 0000103079 101-109 LANCASTER HUTCHINS ROAD HUTCHINS, TX US, 75141-3061 TEL: 972 225 4271 FAX: 972 225 5052 Class: B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS CASABLANCA AERONAUTIQUE, 0000133234 AEROPOLE DE L'AEROPORT, MOHAMMED V NOUASSEUR, MA MA, 27000 TEL: 5 22 53 92 44 FAX: 5 22 53 92 43 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY Page 194 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PSPEC 922 APPLICATION OF ALUMINIUM HEAT RESISTANT COATING Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to Manual Riveting ONLY. BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation: Type 1 immersion and Type 2 manual. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Touch-up with prep-pen only CASCADE AEROSPACE INC., 0000109092 1337 TOWNLINE ROAD ABBOTSFORD, BC CA, V2T 6E1 TEL: 604-850-7372 FAX: 604 557 2655 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Canadian AMO approval 88-00 & EASA dual approval EASA.145.7026. CASCADE DESIGNS LTD., 0000104835 DWYER ROAD MIDLETON, CK IE, 0 TEL: 353-21-4621400 FAX: 21-4613-690 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods CASCADE GASKET & MFG. CO. INC., 0000118948 8825 S. 228TH ST. KENT, WA US, 98031-2437 TEL: 253 854 1800 FAX: 253 854 1921 Class: C MANUFACTURER CASP AEROSPACE INC., 0000101986 98 COLUMBUS ST. POINTE-CLAIRE, QC CA, H9R 4K4 TEL: 514 630-7777-20 FAX: 514 630 9999 Class: D DISTRIBUTOR E MAINTENANCE ORGANIZATION CASTEL ENTERPRISES LTD., 419 E. 57TH ST., 11A NEW YORK, NY US, 10022 Class: H COMMERCIAL OFF THE SHELF 0000126949 Page 195 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 212 758 9900 FAX: 212 758 3391 CASTLE METALS, 0000106848 3050 S. HYDRAULIC AVE. WICHITA, KS US, 67216-2405 TEL: 316 522 5900 FAX: 316 522 2272 Class: A SUBCONTRACTORS C MANUFACTURER D DISTRIBUTOR CASTLE METALS AEROSPACE, 0000108072 TRANSTAR (EUROPE) HOUSE MEREDEWS LETCHWORTH, HT GB, SG6 1WH TEL: 1462 687 6666 FAX: 1462 684 642 Class: D DISTRIBUTOR CASTLE METALS FRANCE, 0000133907 ZI DU PRE CADEAU MONTOIR DE BRETAGNE, 42 FR, 44550 TEL: 33(0)240458354 FAX: 33(0)240458355 Class: A SUBCONTRACTORS D DISTRIBUTOR CASTROL INDUSTRIAL NORTH, 0000119815 775 LOUIS DR. WARMINSTER, PA US, 18974 TEL: 215 674 5301 FAX: 999 999 9999 Class: C MANUFACTURER CAV AEROSPACE LIMITED SP Z.O.O, 0000133077 SZYPOWSKIEGO 1 NOWA DEBA, 41 PL, 39-460 TEL: 48172502300 FAX: 48172502300 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Specification Controlled with Limitations: BAPS 174-02 FABRICATION OF PLUMBING LINES Limitation: Cutting, deburring and in process cleaning only Specification Controlled: BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS CAPTIVE LABORATORY PSPEC 801 MANUAL INSTALLATION AND REMOVAL OF SOLID RIVETS PSPEC 923 APPLICATION OF EPOXY FINISH COAT TO A/C INTERNAL Page 196 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval SURFACES Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limitation: Limited to Electrochemical Etch Ident only BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Limited to Method 1 - Lock Wire BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to Manual Riveting Only. BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Supplier not apporved for fastener encapsulation BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to Type 2 Manual Application Alodine 1132 Touch Prep Pen for Electrical Bonding only PSPEC 213 FORMING OF ALUMINUM ALLOYS Limitation: Limited to cold forming only CAV AEROSPACE LTD., 0000109881 NO 1 INDUSTRIAL ESTATE CONSET, DU GB, DH8 6SR TEL: 01207 582811 FAX: 01207 582812 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS PSPEC 401 HEAT TREATMENT OF ALUMINIUM AND ALUMINIUM ALLOYS PSPEC 910 ETCH AND EPOXY PRIMING CAV AEROSPACE MEXICO, 0000130734 ALEJANDRO DUMAS NO. 11321 CHIHUAHUA, CHI MX, 31136 TEL: 52 614 158 66... FAX: 44 01207 5828 Class: A SUBCONTRACTORS Specification Controlled: PPS 20.07 CONDUCTIVITY TESTING Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Limited to Touch Up only. BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Limited to Touch Up only. BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to Manual Riveting only. Page 197 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING Limitation: Limited to touch up only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to type 2 Manual Application – Alodine 1132 Touch and Prep Pen BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: limited to : Limitation: Solution Heat treatment @ 870 °F (466 °C) to 985 °F(529 °C) for material thicknesses of Limitation: 0.020” to 0.080” Limitation: Limitation: Aging Heat Treatment @225 °F (107 °C) to 450°F (232°C) for material thicknesses of 0.020” Limitation: to .080” PPS 01.02 FORMING ALUMINUM ALLOYS Limitation: Heat treatment process limited to: Limitation: Limitation: Solution Heat treatment @ 870 °F (466 °C) to 985 °F(529 °C) for material thicknesses of Limitation: 0.020” to 0.080” Limitation: Limitation: Aging Heat Treatment @225 °F (107 °C) to 450°F (232°C) for material thicknesses of 0.020” Limitation: to .080” PPS 20.08 HARDNESS TESTING Limitation: (Limited to Rockwell Hardness Testing) CBS FASTENERS, 0000106856 1345 N. BRASHER ST. ANAHEIM, CA US, 92807-2046 TEL: 714 779 6368 FAX: 714 779 0934 Class: C MANUFACTURER CCF SOLUTIONS INC., 754 HALPERN DORVAL, QC Class: H COMMERCIAL OFF THE SHELF 0000118626 Page 198 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval CA, H9P 1G6 TEL: 514 633 6389 FAX: 514 633 0326 CEF INDUSTRIES LLC, 0000132156 320 CHURCH ST. ADDISON, IL US, 60101 TEL: 630 628 2299 FAX: 630 628 1386 Class: B EQUIPMENT SUPPLIERS CEFIVAL, 0000127679 35 RUE DU DOCTEUR TOUATI PERSAN, 95 FR, 95340 TEL: 1 39 37 12 27 FAX: 1 39 37 12 20 Class: C MANUFACTURER CENTENNIAL PLASTICS MFG. LTD., 0000107720 2590 S. SHERIDAN WAY MISSISSAUGA, ON CA, L5J 2M4 TEL: 905 823 4090 FAX: 905 823 0256 Class: C MANUFACTURER CENTER INDUSTRIES CORP., 0000101062 2505 CUSTER S. WICHITA, KS US, 67217-1321 TEL: 316 942 8255 FAX: 316 942 2636 Class: A SUBCONTRACTORS CENTRA INDUSTRIES INC., 0000106858 24 CHERRY BLOSSOM ROAD CAMBRIDGE, ON CA, N3H 4R7 TEL: 519 650 2828-204 FAX: 519 201 3105 Class: A SUBCONTRACTORS CENTRAL COMPONENTS INC., 1834 S. RESEARCH LOOP TUCSON, AZ US, 85710-6711 Class: A SUBCONTRACTORS 0000121823 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Lear 65 Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Page 199 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 520 571 1433 FAX: 520 571 1484 CENTRAL KEY & SAFE CO. INC., 0000101381 305 MARKET N. WICHITA, KS US, 67202-2009 TEL: 316 262 6144 FAX: 316 262 5079 Class: H COMMERCIAL OFF THE SHELF CENTRAL SEMICONDUCTOR CORP., 0000123323 145 ADAMS AVE. HAUPPAUGE, NY US, 11788-3603 TEL: 631-435-1110 FAX: 631-435-1824 Class: C MANUFACTURER CENTRAL WIRE INDUSTRIES, 0000133970 6509 OLSON ROAD UNION, IL US, 60180-0423 TEL: 815 923 4924 FAX: 815 923 2126 Class: A SUBCONTRACTORS CENTRALS MICROSYSTEMS, 0000131762 350 DES ERABLES LACHINE, QC CA, H8S 2P9 TEL: 514 367 3061 FAX: 514 367 4043 Class: H COMMERCIAL OFF THE SHELF CENTRO DE INGENIERIA Y DESARROLLO, 0000120025 AV. PLAYA PIE DE LA CUESTA NO. 702 QUERETARO, QRO MX, 76130 TEL: 442 211 9800 FAX: 442 211 9804 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS Page 200 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAPS 176-17 RADIOGRAPHIC INSPECTION INDEPENDANT LABORATORY Specification Controlled with Limitations: BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Limitation: Limited to type 1 method C per NDE-PT7 Aerosol method CENTRO DE INVESTIGACION Y DESARROLL, 0000128189 PARQUE TECNOLOGICO QUERETARO PEDRO ESCOBEDO, QRO MX, 76703 TEL: 442 211 60 00 FAX: 442 211 60 01 Class: A SUBCONTRACTORS CENTURY TOOL & MACHINERY LTD., 0000108115 425 SUPPERIOR BLVD. #4 MISSISSAUGA, ON CA, L5T 2W5 TEL: 905 795 1999 FAX: 905 795 9808 Class: D DISTRIBUTOR CEP INDUSTRIE, 0000134421 400, AVENUE BARTHELEMY THIMMONIER BRIGNAIS, 69 FR, 69530 TEL: 514 855 5000 FAX: 514 855 5000 Class: A SUBCONTRACTORS Specification Controlled with Limitations: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS Specification Controlled: PSPEC 305 RADIOGRAPHIC EXAMINATION Page 201 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address CERAMIC SUBSTRATES AND COMPONENTS L, LUKELY WORKS, CARISBROOKE ROAD ISLE OF WIGHT, HA GB, P030 1DH TEL: 1983 528697 FAX: 1983 822252 Classification 0000132853 Learjet Approved Suppliers Scope of Approval Class: C MANUFACTURER CERTIFIED METAL CRAFT, 0000107883 877 VERNON WAY EL CAJON, CA US, 92020-1940 TEL: 619-593-3636 FAX: 619-593-3635 Class: A SUBCONTRACTORS CHADBURNS PT LTD., 0000107221 CHADBURN HOUSE WAKEFIELD ROAD NETHERTON BOOTLE, MY GB, L30 6TZ TEL: 44 151 525 4155 FAX: 44 151 515 415 Class: C MANUFACTURER CHAMPION AEROSPACE LLC., 0000102254 1230 OLD NORRIS ROAD LIBERTY, SC US, 29657-3508 TEL: 864 843 5429 FAX: 864 843 5467 Class: C MANUFACTURER CHARLES A. STARR CO. INC., 0000101413 1410 GREG ST., SUITE 416 SPARKS, NV US, 89431-5947 TEL: 775 828 1964 FAX: 775 828 1966 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods CHARLES ENGINEERING INC., 0000122033 10400 S. 119TH ST. W. CLEARWATER, KS US, 67026 TEL: 620 584 2381 FAX: 620 584 2904 Class: A SUBCONTRACTORS C MANUFACTURER Specification Controlled with Limitations: BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: Limited to aging of solution heat-treated aluminum alloy sheet material. BAPS 168-13 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: Hardness Testing limited to Rockwell Standard and Rockwell Superficial for aluminum alloys only. CHASE BRASS AND COPPER CO., LLC, Class: Systems with Limitations: 0000135407 Specification Controlled: PPS 30.13 HEAT TREATMENT OF NICKEL AND NICKEL ALLOYS PPS 30.14 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS Page 202 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 14212 SELWYN DRIVE MONTPELIER, OH US, 43543 TEL: 419-485-8932 FAX: 999 999 9999 C MANUFACTURER 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM-001 (Interior Completion Materials Only) CHASE CORPORATION, 0000101136 201 ZETA DR. PITTSBURGH, PA US, 15238 TEL: 412 828 1500 FAX: 412 828 1694 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 118 Limitation: SEE EMCM # 118 Limitation: Acrylic Conformal Coating Humiseal 1B15 and Humiseal 1B73 CHATAL MOROCCO, 0000129872 ZA HAY RAHMA # 1294 SECTEUR D SALE, MA MA, 11000 TEL: 537872960 FAX: 537872961 Class: A SUBCONTRACTORS CHELTENHAM TOOL CO. LTD., 0000109925 SWINDON ROAD CHELTENHAM, GL GB, GL51 9NB TEL: 01242 527681 FAX: 01242 227258 Class: A SUBCONTRACTORS CHELTON LTD., 0000103846 CHELTON CENTRE, FOURTH AVENUE MARLOW, BU GB, SL7 1TF TEL: 1628 472072-2121 FAX: 1628 482255 Class: C MANUFACTURER CHELTON AVIONICS INC., 0000101973 6400 WILKINSON DR. PRESCOTT, AZ US, 86301-6164 TEL: 928-756-5191 FAX: 928 708 1545 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION CHELTON INC., 0000100690 1955 LAKEWAY DR., SUITE 200 LEWISVILLE, TX US, 75057-6448 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER Page 203 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 972 221 1783-230 FAX: 972 436 2716 CHEM-TREND L.P., 0000134813 1445 W. MCPHERSON PARK DRIVE HOWELL, MI US, 48844-0860 TEL: 517-546-4520 FAX: 517-546-8910 Class: C MANUFACTURER CHEMEON SURFACE TECHNOLOGY, 0000136944 2241 PARK PLACE SUITE B MINDEN, NV US, 89701 TEL: 775 782 8324 FAX: 775 782 2498 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: MIL-DTL-81706 Type II, Class 1A, form 1 & Type II, Class 3, form 1 CHEMETALL CANADA LTD., 0000106810 115 EAST DR. BRAMPTON, ON CA, L6T 1B7 TEL: 905 791 1628 FAX: 908-219-5755 Class: D DISTRIBUTOR Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS CHEMETALL GMBH, 0000127009 INNERSTETAL 2 LANGELSHEIM, 03 DE, 38685 TEL: 495326510 FAX: 495326511258 Class: C MANUFACTURER CHEMETALL PLC., 0000110647 DENBIGH ROAD, BLETCHLEY MILTON KEYNES, MK GB, MK1 1PB TEL: 1908 64 93 33 FAX: 1908 37 39 39 Class: D DISTRIBUTOR CHEMETALL TS S.A.S., 0000133908 280, RUE JEAN-BAPTISTE-GODIN VILLENEUVE ST. GERMAIN, 02 FR, 02200 TEL: 33 (0) 147 15... FAX: 33 (0) 323 53 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM #547 CHEMETALL US INC., 0000133888 1100 TECHNOLOGY DRIVE JACKSON, MI Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 204 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 49201 TEL: 517 817 4511-... FAX: 517 787 5538 CHEMTOOL INC., 0000120759 8200 RIDGEFIELD ROAD CRYSTAL LAKE, IL US, 60012-2912 TEL: 815 459 1250 FAX: 815 459 1955 Class: C MANUFACTURER CHEMTRADE, 0000137270 155 GORDON BAKER ROAD #300 TORONTO, ON CA, M2H 3N5 TEL: 416 496 5856 FAX: 416 496 9414 Class: C MANUFACTURER CHENGDU SIGMA PRECISION COMPONENTS, 0000133942 UNIT NO. 8, CHENGDU HI-TECH ZONE (WEST P CHENGDU, 230 CN, 611731 TEL: 86 28 8795 8528 FAX: 999 999 9999 Class: A SUBCONTRACTORS CHERRY AEROSPACE, 0000103121 1224 E. WARNER AVE. SANTA ANA, CA US, 92705-5414 TEL: 714 850 6015 FAX: 714 850 6095 Class: C MANUFACTURER CHEYENNE MFG. INC., 0000101760 3713 W. 30TH ST. S. WICHITA, KS US, 67217-1017 TEL: 316 942 7665 FAX: 316 942 7669 Class: A SUBCONTRACTORS CHICAGO EXTRUDED METALS CO., 0000115894 1601 S. 54TH AVE. CICERO, IL US, 60804-1898 TEL: 708-780-3446 FAX: 708 780 3479 Class: C MANUFACTURER CHINN LTD., 0000118591 COVENTRY ROAD Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM supplier #1003 Specification Controlled with Limitations: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: Limited to Hardness Testing ONLY Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Page 205 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification EXHALL COVENTRY, WM GB, CV7 9FT TEL: 2476 369400 FAX: 2476 368000 Scope of Approval BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS PPS 01.02 FORMING ALUMINUM ALLOYS PPS 01.36 FORMING OF TITANIUM AND TITANIUM ALLOYS PPS 20.03 PENETRANT FLAW DETECTION PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.09 CLEANING OF TITANIUM PPS 32.01 CROMATE CONVERSION COATING PSPEC 910 ETCH AND EPOXY PRIMING CHIRON TECHNOLOGY, 0000127420 WYVOLS COURT, SWALLOWFIELD READING, BK GB, RG7 1WY TEL: 0118 988 0228 FAX: 0118 988 1055 Class: H COMMERCIAL OFF THE SHELF CHOMERICS DIV., 0000116231 77 DRAGON CT. WOBURN, MA US, 01801-1039 TEL: 781-935-4850 FAX: 781-933-4318 Class: C MANUFACTURER CHOMERICS LAMINATES INC., 0000108331 16 FLAGSTONE DR. HUDSON, NH US, 03051-4904 TEL: 781 935 4850 FAX: 781 993 4318 Class: C MANUFACTURER CHRISTENSEN INDUSTRIES, 0000102056 2990 S. MAIN ST. SALT LAKE CITY, UT US, 84115-3540 TEL: 801 466 3334 FAX: 801 466 1441 Class: C MANUFACTURER CHROME PLUS INTL., 0000123135 3939 W. 29TH ST. S. WICHITA, KS US, 67217-1009 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND Page 206 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address TEL: 316 944 3600 FAX: 316-944-3602 Classification Learjet Approved Suppliers Scope of Approval WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 138-49 APPLICATION OF BAMS 565-013 HEAT RESISTANT COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-36 ELECTROLYTIC POLISHING BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 185-02 SHOT PEENING OF METAL PARTS BAPS 186 CHEMICAL MILLING OF ALUMINUM CAPTIVE LABORATORY LES 1004 PENETRANT INSPECTION LES 1006 INSPECTION, MAGNETIC PARTICLE LES 1045 ANODIZING, CHROMIC ACID LES 1047 CHEMICAL FILM TREATMENT, APPLICATION OF - ALUMINUM ALLOYS LES 1048 PLATING CADMIUM-STEEL & COPPER LES 1079 EPOXY FINISH, FUEL RESISTANT, APPLICATION OF LES 1136 CHEM MILL LES 1323 PASSIVATION OF CORROSION RESISTANT STEEL LES 1365 SHOT PEENING LES 1422 ELECTROPOLISHING CORROSION RESISTANT STEELS Page 207 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval LES PPS PPS PPS 1480 ELECTROLESS NICKEL PLATING 17.03 SHOT PEENING 20.01 MAGNETIC PARTICLE INSPECTION 20.03 PENETRANT FLAW DETECTION Specification Controlled with Limitations: BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) Limitation: (Surface Roughness) BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to Surface Preparation Only. CHURCHILL CORP., 0000107722 344 FRANKLIN ST. MELROSE, MA US, 02176-1825 TEL: 781 665 4700 FAX: 781 662 5291 CIMCOOL INDUSTRIAL PRODUCTS B.V., SCHIEDAMSEDYK VLAARDINGEN, 12 NL, 3134 KK TEL: 31104600660 FAX: 31104603240 Class: B EQUIPMENT SUPPLIERS 0000134346 Class: C MANUFACTURER CIMCOOL INDUSTRIAL PRODUCTS, LLC, 0000125556 3000 DISNEY ST. CINCINNATI, OH US, 45209 TEL: 513 458 8198 FAX: 513 458 8179 Class: C MANUFACTURER CINCH CONNECTORS DE MEXICO S.A. DE, 0000111128 CARRETERA RIBERENA KM.9 P. I. MAQUILPARK REYNOSA, TMS MX, 88615 TEL: (899) 924-052... FAX: (899) 924-284 Class: C MANUFACTURER CIRCOR AEROSPACE INC., 2301 WARDLOW CIR. Class: B EQUIPMENT SUPPLIERS 0000100837 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to the products approved and listed in the EMCM Only. Limitation: Limited to the products approved and listed in the EMCM Only. Limitation: See EMCM #837 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 208 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval CORONA, CA US, 92880-2801 TEL: 951 270 6431 FAX: 951 270 6431 E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval QWCR710X & EASA dual approval EASA.145.5907. CIRCOR AEROSPACE INC., 0000110391 425 EAST RABRO DR. SUITE 100 HAUPPAUGE, NY US, 11788 TEL: 631 737 1900 FAX: 631 737 1912 Class: C MANUFACTURER CIRCUIT SYSTEMS CO., 0000101522 2628 COLORADO CIR., SUITE 100 ARLINGTON, TX US, 76015-2422 TEL: 817 861 6575 FAX: 817 274 6508 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER CITGO PETROLEUM CORPORATION, 0000108465 1808 NE 9TH OKLAHOMA CITY, OK US, 73117 TEL: 405 270 6244 FAX: 405 270 6305 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM #747 CITYJET LIMITED, 0000136522 MAINTENANCE HANGAR HUNTSTOWN / WESTLAND, DB IE, K67 HE92 TEL: 353 187 00244 FAX: 353 187 00245 Class: J LOGISTIC PROVIDER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Provision of Buyer Furnished Equipment. CLAIRE DECO, 0000110454 5750 ROYALMOUNT, SUITE 100 MONTREAL, QC CA, H4P 1K5 TEL: 514 340 1250 FAX: 514 340 9423 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods CLARENDON ENGINEERING SUPPLIES LTD., 0000119658 NEWTOWN GRANGE FARM BUSINESS PARK, DESFO NEWTOWN UNTHANK, LE GB, LE9 9FL TEL: 01582 715150 FAX: 01582 712120 Class: D DISTRIBUTOR CLARK MFG. INC., Class: 0000106873 Specification Controlled: Page 209 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 1936 NORTH A ST. WELLINGTON, KS US, 67152-4510 TEL: 620 326 7491 FAX: 620 326 8604 A SUBCONTRACTORS CLEEVE TECHNOLOGY INC., 0000108548 716 COLONEL SAM DR. OSHAWA, ON CA, L1H 7Y2 TEL: 905 579 9502-232 FAX: 905 579 9991 Class: C MANUFACTURER D DISTRIBUTOR CLEVELAND WIRE CLOTH & MANUFACTURIN, 3573 EAST 78TH STREET CLEVELAND, OH US, 44105-1596 TEL: 800-321-3234 FAX: 216-341-1876 Class: C MANUFACTURER 0000135182 Learjet Approved Suppliers Scope of Approval LES 1047 CHEMICAL FILM TREATMENT, APPLICATION OF - ALUMINUM ALLOYS LES 1051 HEAT TREAT OF ALUMINUM ALLOYS CLICK BOND INC., 0000101992 2151 LOCKHEED WAY CARSON CITY, NV US, 89706-0713 TEL: 775-885-8000- FAX: 775 883 0191 Class: C MANUFACTURER CLYDE HARDWARE CO. INC., 0000108694 331 OLSEN S. TUCSON, AZ US, 85719-6336 TEL: 520-622-6431 FAX: 520-624-4082 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods CM PRECISION COMPONENTS LTD., 0000107996 3 BALLYDUGAN ROAD DOWNPATRICK, DN GB, BT60 6LL TEL: 2844 619920 FAX: 2844 614733 Class: A SUBCONTRACTORS CM RUBBER, 0000106875 414 LITTELL AVE. DAYTON, OH US, 45419-3608 TEL: 937 299 2782 FAX: 937 299 2790 Class: C MANUFACTURER Page 210 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval CMC ELECTRONICS INC., 0000100278 600 DR. FREDERIK PHILIPS BLVD. ST-LAURENT, QC CA, H4M 2S9 TEL: 514-748-3021 FAX: 514 748 3055 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Canadian AMO approval 03-73 & EASA dual approval EASA.145.7022. CO-OPERATIVE INDUSTRIES, 0000108134 1401 S.CHERRY LANE FORT WORTH, TX US, 76108 TEL: 817 624 4700 FAX: 817 624 4282 Class: C MANUFACTURER COAST PLATING INC., 0000121315 417 W. 164TH ST. Gardena, CA US, 90248-2726 TEL: 323-770-0240 FAX: 310-715-1312 Class: A SUBCONTRACTORS Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS LES 1047 CHEMICAL FILM TREATMENT, APPLICATION OF - ALUMINUM ALLOYS LES 1079 EPOXY FINISH, FUEL RESISTANT, APPLICATION OF MPS 250-023 PAINTING DETAIL PARTS AEROSPATIALE A330/A340 MPS 250-024 CHROMIC ACID ANODIZING AEROSPATIALE A330/A340 MPS 250-085 QUALIFICATION, ACCELERATED DRYING OF PAINTS MPS 250-301 PENETRANT INSPECTION MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 32.02 MANUAL APPLICATION OF CHEMICAL CONVERSION COATINGS PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) Page 211 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PPS 34.08 EPOXY PRIME PPS 34.16 APPLICATION OF EPOXY-AMINE, URETHANE COMPATIBLE, INTERMEDIATE PRIMER (F23) PSPEC 411 SULPHURIC ACID ANODISING Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Limitation to Oven # 7 ( I.D. # 089 ) for the 125 - 200 F ( 50 - 93 C ) Temperature range of the Limitation: specification . BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Electrical bonding of Aircraft with limitation to Surface preparation ONLY BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation to Type 2 ONLY . LES 1004 PENETRANT INSPECTION Limitation: Type I only MPS 250-171 ELECTRICAL BONDING Limitation: Electrical Bonding Aerospatiale A330/A340 Program with limitation to surface preparation Limitation: ONLY . PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS Limitation: Limitation to PRIMING fuel tank ONLY COAST PLATING INC., 0000106876 128 W. 154TH ST. GARDENA, CA US, 90248-2282 TEL: 323 770-0240-... FAX: 310 715 1312 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-4E TESTING OF WEAR AND ABRASION PROPERTIES BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-32 SULFURIC ACID ANODIZING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Page 212 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS LES 1047 CHEMICAL FILM TREATMENT, APPLICATION OF - ALUMINUM ALLOYS LES 1079 EPOXY FINISH, FUEL RESISTANT, APPLICATION OF PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 31.09 CLEANING OF TITANIUM PPS 32.01 CROMATE CONVERSION COATING PPS 32.02 MANUAL APPLICATION OF CHEMICAL CONVERSION COATINGS PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PPS 34.16 APPLICATION OF EPOXY-AMINE, URETHANE COMPATIBLE, INTERMEDIATE PRIMER (F23) PSPEC 300 PENETRANT FLAW DETECTION PSPEC 410 CHROMIC ACID ANODISING PSPEC 910 ETCH AND EPOXY PRIMING Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Limited to 125-160F (50-70C) BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation to BAPS 160-040 Type 2 ONLY . LES 1004 PENETRANT INSPECTION Limitation: Type I ONLY PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS Limitation: Limitation to Priming fuel tank ONLY . COASTAL COMPONENT INDUSTRIES, 0000101610 133 E. BRISTOL LANE ORANGE, CA US, 92865-2749 TEL: 714-685-6685 FAX: 714-685-6677 Class: B EQUIPMENT SUPPLIERS D DISTRIBUTOR Page 213 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address COATINGS & CONVERTING TECHNOLOGIES, 80 E. MORRIS ST. PHILADELPHIA, PA US, 19148 TEL: 215 271 0610 FAX: 215 271 3305 Classification 0000129348 Scope of Approval Class: C MANUFACTURER CODICO DISTRIBUTORS LTD., 0000128889 B4 WIN BUSINESS PARK, CANAL QUAY NEWRY, DN GB, BT35 6PH TEL: 028 302 61066 FAX: 028 302 66614 Class: D DISTRIBUTOR COL-FIN SPECIALTY STEEL CORP., 0000108809 100 FRONT ST. NEW BRIGHTON, PA US, 15066-2923 TEL: 724 843 7315 FAX: 724 847 7079 Class: C MANUFACTURER COLDER PRODUCTS CO., 0000120297 1001 WESTGATE DR. ST-PAUL, MN US, 55114-1092 TEL: 651 645 0091 FAX: 651 645 5404 Class: H COMMERCIAL OFF THE SHELF COLE INSTRUMENT CO., 0000110303 2650 S. CRODDY WAY SANTA ANA, CA US, 92704-5238 TEL: 714 556 3100-159 FAX: 714 241 9061 Class: C MANUFACTURER COLE-PARMER CANADA, 0000134131 210-5101 RUE BUCHAN MONTREAL, QC CA, H4P 2R9 TEL: 800 363 590-139 FAX: 514 355 7119 Class: H COMMERCIAL OFF THE SHELF COLE-PARMER INSTRUMENT CO., 625 E. BUNKER CT. VERNON HILLS, IL US, 60061-1830 Class: D DISTRIBUTOR 0000102779 Learjet Approved Suppliers Page 214 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 847 549 7600 FAX: 847 247 2929 COLONIAL SPRING COMPANY, 0000134938 95 VALLEY STREET BRISTOL, CT US, 06010 TEL: 514 855 5000 FAX: 514 855 5000 Class: C MANUFACTURER COLUMBIA PRECISION LTD, 0000131510 140 CHESTON ROAD, ASTON BIRMINGHAM, WM GB, B75 EH TEL: 44 01213271 FAX: 44 01213271 Class: A SUBCONTRACTORS COLUMBUS JACK CORPORATION, 0000109823 2222 SOUTH THIRD STREET COLUMBUS, OH US, 43207 TEL: 614-443-7492 FAX: 614-444-9337 Class: B EQUIPMENT SUPPLIERS G INDIRECT PRODUCT COMAIR ROTRON, 0000103460 2675 CUSTOM HOUSE CT. SAN DIEGO, CA US, 92154-7650 TEL: 619 661 6688 FAX: 619 661 1757 Class: H COMMERCIAL OFF THE SHELF COMANT INDUSTRIES INC., 0000101085 577 BURNING TREE ROAD FULLERTON, CA US, 92833-1445 TEL: 714 870 2420-152 FAX: 714 870 5133 Class: B EQUIPMENT SUPPLIERS COMPLETE TECHNICAL REPRESENTATION, 0000101113 1705 JOHN CONNALLY DR CARROLLTON, TX US, 75006 TEL: 972 621 1111 FAX: 972 621 1616 Class: D DISTRIBUTOR COMPONENT ENTERPRISES CO. INC., 235 E. PENN ST. NORRISTOWN, PA Class: C MANUFACTURER 0000124463 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to part no WBB-M-16BXC and WBA-F-16BXC , Page 215 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification US, 19401-5020 TEL: 610 272 7900 FAX: 610 272 7040 Scope of Approval to serve for Service aircraft only COMPONENT PRODUCTS CORPORATION, 0000137483 11623 CYRUS WAY MUKILTEO, WA US, 98275 TEL: 514-855-5000 FAX: 514-855-5000 Class: C MANUFACTURER COMPOSITES HORIZONS, INC., 0000106882 1471 INDUSTRIAL PARK ST. COVINA, CA US, 91722-3414 TEL: 626 331 0861 FAX: 626 339 3220 Class: B EQUIPMENT SUPPLIERS COMPOSITES TESTING LABORATORY, 0000133346 AN CHOILL RUA INDREABHAN, GW IE, * TEL: 353 91 505436 FAX: 514 855 5000 Class: A SUBCONTRACTORS COMPTOIR GENERAL DU RESSORT CGR, 0000106883 239 ROUTE DE GRENADE BLAGNAC, 31 FR, 31700 TEL: 33 5 6116 7510 FAX: 33 5 6116 7511 Class: C MANUFACTURER COMPUSERVICE, 0000117958 295 PEEL MONTREAL, QC CA, H3C 3R9 TEL: 514-933-4455 FAX: 514 939 3606 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods (Electronic Appliance) COMTEK ADVANCED STRUCTURES LTD., Class: 0000108123 Specification Controlled: BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) INDEPENDANT LABORATORY Systems with Limitations: Page 216 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address 1360 ARTISANS CT. BURLINGTON, ON CA, L7L 5Y2 TEL: 905 331 8121-118 FAX: 905 331 8125 Classification Learjet Approved Suppliers Scope of Approval A SUBCONTRACTORS 0000 GENERAL LIMITATION / REMARKS B EQUIPMENT SUPPLIERS Limitation: Canadian AMO approval 70-94 & EASA dual approval E MAINTENANCE ORGANIZATION EASA.145.7079. Specification Controlled: PPS 25.63 EC-1300-L ADHESIVE PPS 39.06 INSTALLATION OF DHC-8 AIRFRAME DE-ICING BOOTS PPS 39.07 INSTALLATION OF DASH 8 AIR INTAKE DE-ICER BOOTS PPS 39.08 REPLACEMENT OF AUTOCLAVE BONDED DE-ICER BOOTS ON DASH 8 COMPOSITE LEADING EDGES CONCAST METAL PRODUCTS CO., 0000128484 131 MYOMA ROAD MARS, PA US, 16046 TEL: 800 626 7071 FAX: 724 538 3956 Class: C MANUFACTURER CONCORD ELECTRONICS INC., 0000106885 33-00 47TH AVE, LEVEL-1A LONG ISLAND CITY, NY US, 11101 TEL: 212 777 6571 FAX: 212 995 0161 Class: C MANUFACTURER CONCORDE BATTERY CORP., 0000101757 2009 SAN BERNARDINO ROAD WEST COVINA, CA US, 91790-1006 TEL: 626 813 1234 FAX: 626 813 1235 Class: C MANUFACTURER CONDAT LUBRIFIANTS, 0000133502 104 AVENUE FREDERIC MISTRAL CHASSE SUR RHONE, 69 FR, 38670 TEL: 04 78 07 38 38 FAX: 04 78 07 38 00 Class: C MANUFACTURER CONEC CORPORATION, 0000136569 125 SON PAC BOULEVARD BRAMPTON, ON CA, L6S 5Z6 Class: B EQUIPMENT SUPPLIERS Page 217 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 905 790 2200 FAX: 905 790 2201 CONESYS/AERO ELECTRIC CONNECTOR INC, 2280 W. 208TH STREET TORRANCE, CA US, 90501 TEL: 310-618-3737 FAX: 310-618-3738 0000109223 Class: C MANUFACTURER CONNECTICUT SPRING & STAMPING, 0000106887 48 SPRING LANE FARMINGTON, CT US, 06032-3140 TEL: 860 677 1341-369 FAX: 860 677 7199 Class: C MANUFACTURER CONNECTOR TECHNOLOGY INC., 0000101840 135 INDUSTRY CT. KALISPELL, MT US, 59901-7991 TEL: 406 756 0771 FAX: 406 756 0772 Class: C MANUFACTURER CONSOLIDATED AIRCRAFT, 0000101298 55 RAYNOR AVE. RONKONKOMA, NY US, 11779-6649 TEL: 631 981 7700 FAX: 631 981 7706 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval GI1R167K & EASA dual approval EASA.145.4346. CONSOLIDATED INDUSTRIES INC., 0000108430 677 MIXVILLE ROAD CHESHIRE, CT US, 06410-3836 TEL: 203 272 5371-240 FAX: 203 699 2485 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM 639 CONSOLIDATED PRECISION PRODUCTS, 0000108469 8701 HARRIET AVE. S.O. MINNEAPOLIS, MN US, 55420-2729 TEL: 952 887 7855 FAX: 952 887 7858 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 758 CONSOLIDATED PRECISION PRODUCTS INC, 8333 WILCOX AVE. CUDAHY, CA Class: A SUBCONTRACTORS Specification Controlled: LES 1004 PENETRANT INSPECTION LES 1009 INSPECTION, RADIOGRAPHIC 0000107580 Page 218 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 90201-5919 TEL: 323 773 2363 FAX: 323 562 3174 CONSTELLIUM ISSOIRE, 0000107277 RUE YVES LAMOURDEDIEU, ZI DES LISTES BP ISSOIRE, 63 FR, 63500 TEL: 4 73 55 51 79 FAX: 4 73 55 51 07 Class: C MANUFACTURER D DISTRIBUTOR Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM ref. #370 CONSTELLIUM MONTREUIL-JUIGNE, 0000108929 6 RUE PIERRE & MARIE-CURIE MONTREUIL, 49 FR, 49460 TEL: 2 41 37 44 35 FAX: 2 41 37 44 99 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 872 CONSTELLIUM ROLLED PRODUCTS, 0000108495 26164 CENTURY ROAD RAVENSWOOD, WV US, 26164 TEL: 304 273 6594 FAX: 304 273 6355 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM CONTACT ENTERPRISES INC., 0000104911 1024 HARDING AVE., SUITE 204 VENICE, CA US, 90291-4970 TEL: 818 341 9399 FAX: 818 341 6556 Class: C MANUFACTURER D DISTRIBUTOR CONTINENTAL CORDAGE CORP., 0000108415 75 BURTON ST. CAZENOVIA, NY US, 13035-1156 TEL: 315 655 9800 FAX: 315 655 9686 Class: C MANUFACTURER CONTINENTAL MICROWAVE & TOOL CO. IN, 11 CONTINENTAL DR. EXETER, NH US, 03833-4564 TEL: 603 775 5235 FAX: 603 775 5201 CONTROL PRODUCTS INC., 280 RIDGEDALE AVE. 0000101020 0000110266 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM #610 Class: B EQUIPMENT SUPPLIERS Class: C MANUFACTURER Page 219 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval EAST HANOVER, NJ US, 07936-2302 TEL: 973 887 9400-228 FAX: 973 887 5083 COOPER BUSSMANN, 0000111021 PROLONGACION HERMANOS ESCOBAR 7750 C.D. JUAREZ, CHI MX, 32310 TEL: 915 400 0500 FAX: 656 688 7133 Class: C MANUFACTURER COORDINATE INDUSTRIES LTD., 0000107728 2251 WINSTON PARK DR. OAKVILLE, ON CA, L6H 5R1 TEL: 905 829 0099-229 FAX: 905 829 4899 Class: A SUBCONTRACTORS Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 188-02 COLD WORKING OF HOLES PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 21.20 MIXING AND HANDLING TWO PART SEALANTS PPS 21.21 GENERAL SEALING PRACTICES Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Surface prepartion only. BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: limited to method no.1 lockwire BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to manual installation only. BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: CONDITIONALLY APPROVED BASED ON PAST RECEIPT HISTORY AND TO AUDIT BY Limitation: DEHAVILLAND PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS Limitation: Limited for ''Sealant application ONLY'' COORSTEK CERAMICON DESIGNS LTD., 2051 E. MAPLE AVE. EL SEGUNDO, CA US, 90245-5009 0000102803 Class: C MANUFACTURER Page 220 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 310 322 8030 FAX: 310 640 0312 COPPER ALLOYS LTD, 0000136232 GLENDALE STREET BURSLEM, STOKE ON TRENT, ST GB, ST6 2EP TEL: 01782816888 FAX: 514 855 5000 Class: C MANUFACTURER CORDAGES BARRY LTEE., 0000108090 6110 GRANDES PRAIRIES MONTREAL, QC CA, H1P 1A2 TEL: 514 328 3888-231 FAX: 514 328 1963 Class: H COMMERCIAL OFF THE SHELF CORDS CANADA LTD., 0000102927 62 DENSLEY AVE. TORONTO, ON CA, M6M 5E1 TEL: 416 242 6811 FAX: 416 242 6819 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods (Belly Buttons only) CORMER GROUP INDUSTRIES INC., 0000132196 1445 CHURCH AVE. WINNIPEG, MB CA, R2X 2X9 TEL: 204 987 6400-... FAX: 204 988 3808 Class: A SUBCONTRACTORS CORNELL DUBILIER ELECTRONICS, 0000103148 1605 RODNEY FRENCH BLVD. E. NEW BEDFORD, MA US, 02744-2231 TEL: 508 996 8561 FAX: 508 996 3830 Class: C MANUFACTURER CORNING INC., 0000107581 ONE RIVERFRONT PLAZA Class: B EQUIPMENT SUPPLIERS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Touch-up only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual installation BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type II, touch-up application. Page 221 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval CORNING, NY US, 14831 TEL: 607-974-4488 FAX: 607-974-4050 CORNUCOPIA TOOL & PLASTICS INC., 0000103185 448 SHERWOOD DR. PASO ROBLES, CA US, 93447 TEL: 800-235-4144 FAX: 805-369-0033 Class: C MANUFACTURER CORPORATE EXPRESS, 0000108171 1616 EIFFEL BOUCHERVILLE, QC CA, J4B 8N3 TEL: 450 449 4449 FAX: 877 272 2127 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods CORRU-SEALS INC., 0000101116 24 CAPITAL DR. WALLINGFORD, CT US, 06492-2318 TEL: 203 265 9331 FAX: 203 269 1023 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER CORSAIR ELECTRICAL CONNECTORS, 0000124547 17100 MURPHY AVE. IRVINE, CA US, 92614 TEL: 949 833 0273 FAX: 949 833 0280 Class: C MANUFACTURER CORTLAND COMPANY INC., 0000106897 44 RIVER ST. CORTLAND, NY US, 13045-2311 TEL: 607-344-0114 FAX: 607 753 3183 Class: C MANUFACTURER COSGROVE AIRCRAFT SERVICE INC., 0000136528 6 LOOP ROAD, BLDG #2, WHITE PLAINS, NY US, 10604 TEL: 631-231-6111 FAX: 631-231-6128 Class: D DISTRIBUTOR COSGROVE AIRCRAFT SERVICE INC., Class: 0000102330 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM #127 Page 222 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 70 OSER AVE. HAUPPAUGE, NY US, 11788-3809 TEL: 631-231-6111 FAX: 631-231-6128 D DISTRIBUTOR COSWORTH LIMITED, 0000131528 ST JAMES MILL ROAD NORTHAMPTON, BI GB, NN55RA TEL: 01604598562 FAX: 01604598562 Class: A SUBCONTRACTORS COTEC CORP., 0000130374 20-13 PALYONG-DONG CHANGWON CITY, 11 KR, 664-942 TEL: 55 852 9695 FAX: 55 852 9397 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS INDEPENDANT LABORATORY COTEC CORP., 0000127846 669-5 BAJGJI-RI, SANNAM-MYUN SACHEON-CITY, 11 KR, 664-942 TEL: 55 852 9695 FAX: 55 852 9397 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY PPS 20.03 PENETRANT FLAW DETECTION PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.07 CLEANING AND STRIPPING OF PAINTED SURFACES PPS 32.01 CROMATE CONVERSION COATING PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PPS 34.41 APPLICATION OF EPOXY-POLYAMIDE ENAMEL (F22) Page 223 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Limited to drying ovens PAG-DR01 and PAS-DR01 and for temp range 50C-70C (125FLimitation: 160F) BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: limited to non intrusive marking method only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to type 2 only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to type 2 only BAPS 180-01 ALKALINE CLEANING Limitation: limited to Type 1 , immersion cleaning COX & CO. INC., 0000101814 1664 OLD COUNTRY ROAD PLAINVIEW, NY US, 11803-5013 TEL: 212-366-0207 FAX: 212-366-0283 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval CN5R558J & EASA dual approval EASA.145.5045. CPP-PORT HUENEME, 0000107583 705 INDUSTRIAL AVE. PORT HUENEME, CA US, 93041-3505 TEL: 805 488 6451 FAX: 805 488 4129 Class: A SUBCONTRACTORS Specification Controlled: LES 1004 PENETRANT INSPECTION LES 1006 INSPECTION, MAGNETIC PARTICLE LES 1009 INSPECTION, RADIOGRAPHIC LES 1198 QUALIFICATION OF AIRCRAFT CASTINGS LES 1218 INSPECTION, RADIOGRAPHIC - CASTINGS CPP-PORT HUENEME, 0000101288 725 INDUSTRIAL AVE. PORT HUENEME, CA US, 93041-3505 TEL: 805-488-6451- FAX: 805-488-8749 Class: A SUBCONTRACTORS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM #352 CRAFT MANUFACTURING & TOOLING, Class: 0000133667 Specification Controlled: LES 1177 WELDING, REPAIR - PREMIUM ALUMINUM CASTINGS LES 1183 WELDING, REPARI - COROSION RESISTANT STEEL CASTINGS Specification Controlled: Page 224 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address 7152 CENTRAL AVE HOT SPINGS, AR US, 71913 TEL: 501 525 0268 FAX: 501 525 8642 Classification A SUBCONTRACTORS Scope of Approval BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: manual installation BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: wet installation of fasteners, faying surface sealing of nut plate BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 2 with Alodine 1132 "Touch & Prep Pen " for repaired area CRC INDUSTRIES INC., 0000108437 885 LOUIS DR. WARMINSTER, PA US, 18974-2820 TEL: 215 442 6202 FAX: 215 674 5147 Class: C MANUFACTURER CRESCENT MFG. CO., 0000106904 700 GEORGE WASHINGTON TPKE. BURLINGTON, CT US, 06013-1718 TEL: 860 673 2591 FAX: 860 673 5973 Class: C MANUFACTURER CREUZET ROBERT, 0000109933 ROUTE DE BEYSSAC MARMANDE, 47 FR, 47200 TEL: 00 33 05 5320... FAX: 00 33 05 5320 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS PSPEC 213 FORMING OF ALUMINUM ALLOYS PSPEC 300 PENETRANT FLAW DETECTION PSPEC 401 HEAT TREATMENT OF ALUMINIUM AND ALUMINIUM ALLOYS Page 225 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification CRISSAIR INC., 0000101258 28909 AVE. WILLIAMS VALENCIA, CA US, 91355 TEL: 661 294 0084 FAX: 661 294 1025 Class: B EQUIPMENT SUPPLIERS CROSBY CANADA INC., 0000128318 145 HEARTLAKE ROAD BRAMPTON, ON CA, L6W 3K3 TEL: 905 451 9261 FAX: 999 999 9999 Class: H COMMERCIAL OFF THE SHELF CROSS & MORSE, 0000128068 SHADY LANE GREAT BARR BIRMINGHAM, WM GB, B44 9EU TEL: 0121 360 0155 FAX: 0121 325 1079 Class: B EQUIPMENT SUPPLIERS CROSS MFG. CO. (1938) LTD., 0000109935 MIDFORD ROAD COMBE DOWN BATH, BS GB, BA2 5RR TEL: 01225 837000 FAX: 01225 834115 Class: C MANUFACTURER CROSSEN ENGINEERING LTD., 0000108000 MARYLAND IND. EST. BALLYGOWAN ROAD CROSSNACREEVY, DN GB, BT23 6BL TEL: 01232 448569 FAX: 01232 448221 Class: A SUBCONTRACTORS G INDIRECT PRODUCT CROUZET AUTOMATISMES, 0000106907 2 DR. ABEL VALENCE, 26 FR, 26902 TEL: 47580 2101 FAX: 4 7580 2120 Class: B EQUIPMENT SUPPLIERS CRS JET SPARES, INC, 6701 N.W. 12TH AVE. FORT LAUDERDALE, FL Class: D DISTRIBUTOR 0000101909 Learjet Approved Suppliers Scope of Approval Page 226 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 33309-1111 TEL: 954 972 2807 FAX: 954 972 2708 CRUCIBLE INDUSTRIES LLC., 0000106908 575 STATE FAIR BLVD. SOLVAY, NY US, 13209 TEL: 315 470 9310 FAX: 315 470 9279 Class: C MANUFACTURER CRYSTAL VALLEY SALES, 0000111057 4100 BULLARD ROAD ELKHART, IN US, 46516-9566 TEL: 574 295 7599 FAX: 574 295 8568 Class: H COMMERCIAL OFF THE SHELF CTS, 0000121130 CAMINO DE LA CALLEJUELAS NO 1 ALCALA DE HENARES, 28 ES, 28802 TEL: 918 82 33 30 FAX: 918 77 08 64 Class: A SUBCONTRACTORS Specification Controlled: BAPS 160-23 HARD ANODIZING OF ALUMINUM ALLOYS BAPS 180-001 ALKALINE CLEANING BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CURRENT INC., 0000124535 30 TYLER ST. EAST HAVEN, CT US, 06512-3025 TEL: 203 469 1337 FAX: 203 467 8435 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to MIL-I-24768 (series) CURTISS WRIGHT ACTUATION SYSTEMS, 0000136719 3120 NORTHWEST BOULEVARD GASTONIA, NC US, 28052 TEL: 704-480-5256 FAX: 704-481-2230 Class: E MAINTENANCE ORGANIZATION CURTISS WRIGHT CONTROLS, 0000101750 1150 NORTH FIESTA BLVD. GILBERT, AZ US, 85233 TEL: 480 758 6032 FAX: 480 813 4596 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER CURTISS WRIGHT CONTROLS, 1237 NORTHSIDE BLVD. Class: B EQUIPMENT SUPPLIERS 0000107825 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM #132 Page 227 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval SOUTH BEND, IN US, 46615-3930 TEL: 574 234 3157-319 FAX: 574 234 3948 C MANUFACTURER CURTISS-WRIGHT CONTROLS, 0000109860 665 N BALDWIN PARK BLVD CITY OF INDUSTRY, CA US, 91746 TEL: 626-851-3141 FAX: 626 960 8500 Class: B EQUIPMENT SUPPLIERS CURTISS-WRIGHT CONTROLS DE MEXICO S, 0000128474 CARR. INTERNACIONAL KM 5.5 NOGALES, MEX MX, 84094 TEL: 631 311 6579-... FAX: 999 999 9999 Class: B EQUIPMENT SUPPLIERS CURTO-LIGONIER FOUNDRIES CO., 0000135763 1215 NORTH 31ST AVE MELROSE PARK, IL US, 60160-2984 TEL: 708 345 2250 FAX: 708 345 1184 Class: C MANUFACTURER CUSTOM CONTROL SENSORS LLC., 0000102703 21111 PLUMMER ST. CHATSWORTH, CA US, 91311-4905 TEL: 818-341-4610 FAX: 818 709 0426 Class: B EQUIPMENT SUPPLIERS CUSTOM PLYWOOD INC., 0000111052 301 QUALITY AVE. NEW ALBANY, IN US, 47150-7264 TEL: 812 944 7300 FAX: 812 944 7373 Class: A SUBCONTRACTORS CUSTOM SYNTHESIS, LLC, 0000130722 1704 DENVER ROAD ANDERSON, SC US, 29625 TEL: 864 622 2233 FAX: 864 622 2234 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Manufacurer approved for Leskol ASTM D6368 listed in EMCM-001 CUTTING & GRINDING FLUIDS, INC., Class: Systems with Limitations: 0000129753 Page 228 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 317 PEOPLES AVE. ROCKFORD, IL US, 61104-7034 TEL: 815 967 4400 FAX: 815 967 4404 C MANUFACTURER 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to product Microlube to Bombardier Specification BAMS 569-001 class A CYCLONE MFG. 6811 CENTURY MISSISSAUGA, CA, L5N 7K2 TEL: 905 567 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Shot Peening Processes, extention of Cyclone Mississauga (re. V/C 101808) Limitation: Limited to Shot Peening Processes, extention of Cyclone Mississauga (re. V/C 101808) Limitation: Airbus ARP-ID no 296117 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT INC., AVE. ON 0000111064 5601 FAX: 905 567 6911 Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 136-120 POLISHING OF ALUMINUM ALLOY SKIN BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM Page 229 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 185-03 PEEN FORMING OF METAL PARTS BAPS 188-02 COLD WORKING OF HOLES CAPTIVE LABORATORY PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN PPS 17.03 SHOT PEENING PPS 17.04 SHOT PEEN FORMING PPS 21.20 MIXING AND HANDLING TWO PART SEALANTS PPS 21.21 GENERAL SEALING PRACTICES PPS 25.63 EC-1300-L ADHESIVE PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 32.09 APPLICATION OF DRY FILM LUBRICANTS (C3, C7 AND C8) PPS 32.35 CHEMICAL CONVERSION COATING FOR LOW ELECTRICAL RESISTANCE (C10) PPS 33.12 LOW HYDROGEN EMBRITTLEMENT STYLUS CADMIUM PLATING PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PPS 34.16 APPLICATION OF EPOXY-AMINE, URETHANE COMPATIBLE, INTERMEDIATE PRIMER (F23) PSPEC 703 PEENING OF METALLIC COMPONENTS PSPEC 910 ETCH AND EPOXY PRIMING Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: limited to a nominal temperature of 180 F BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limited to Electrochemical Etch Marking BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to surface preparation of parts only. BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: limited to manual installation only BAPS 157-27 INTEGRAL FUEL TANK SEALING Limitation: FAYING SURFACE SEALING OF NUTPLATES AND WET INSTALLATION OF FASTENERS BAPS 160-31 LOCALIZED BRUSHING PLATING Limitation: Cadmium Plating Page 230 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Limitation: limited to Type I, Method A, Sensitivity Level 3 Form a. BAPS 185-02 SHOT PEENING OF METAL PARTS Limitation: Limited to 1SP1397& 2SP1549 Shot Peening machine MPS 250-201 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES AEROSPATIALE A330/A340 PROGRAM PPS 09.06 ELETRICAL BONDING AND GROUDING OF AIRCRAFT STRUCTURES Limitation: Surface Preparation Only PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS Limitation: limited to Primer only CYCLONE MFG. INC., 0000123570 8001 PARK HILL DR. MILTON, ON CA, L9T 5H6 TEL: 905 5675601 FAX: 905 5676911 Class: A SUBCONTRACTORS Specification Controlled: PPS 01.02 FORMING ALUMINUM ALLOYS PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 37.03 FUSION WELDING OF ALUMINUM AND ALUMINUM ALLOYS PPS 37.04 FUSION WELDING OF FERROUS AND NICKEL ALLOYS PPS 37.06 TESTING AND APPROVAL OF AIRCRAFT WELDERS PPS 37.10 REQUIREMENTS FOR FUSION WELDS Specification Controlled with Limitations: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: Limitation to Rockwell hardness testing, superficial hardness testing and electrical Limitation: conductivity testing of metals ONLY. BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: The furnace MRH-01 to solution heat treatment of aluminium sheet and extrusion up to Limitation: 0.249 inches thick, with the exception of rivets, forging and alloy with solution treatment Limitation: over 1000oF. Limitation: Limitation: The furnace MRH-02 to aging treatment of aluminium sheet and extrusion up to 0.249 Limitation: inches thick, with the exception of rivets and forging. Limitation: Page 231 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Limitation: Cyclone Manufacturing is limited to water quench only. BAPS 168-15 STRESS RELIEF OF METALS Limitation: Limited to MRH01 air furnace max 1200F, stress relief BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS Limitation: Limited to furnace MRH01 BAPS 172-34 FUSION WELDING Limitation: aluminum and ferrous alloys only BAPS 180-01 ALKALINE CLEANING Limitation: Limitation: no electrolytic cleaning PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS Limitation: Limited to MRH01 air furnace, max 1200F, aging, stress relief PPS 30.06 PRECIPITATION HARDENABLE (PH) STAINLESS STEEL Limitation: Limited to MRH01 air furnace, max 1200F, aging, stress relief CYCLONE MFG. INC., 0000101808 7300 RAPISTAN CT. MISSISSAUGA, ON CA, L5N 5S1 TEL: 905-567-5601 FAX: 905-567-6911 Class: A SUBCONTRACTORS Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limitation to ink marking and vibro-engraving Limitation: Limitation to ink marking and vibro-engraving Limitation: Limited to intrusive-dot peen marking of CRES and aluminum alloys BAPS 185-000 GRINDING OF STEEL PARTS Limitation: with exception of holes grinding of steels treated to 220-240 ksi and above PPS 01.36 FORMING OF TITANIUM AND TITANIUM ALLOYS Page 232 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval Limitation: Limited to cold forming CYTEC CARBON FIBERS LLC., 0000134285 7139 AUGUSTA ROAD PIEDMONT, SC US, 29673 TEL: 864 277 5720 FAX: 514-855-5000 Class: C MANUFACTURER CYTEC ENGINEERED MATERIALS, 0000109769 501 W. 3RD ST. WINONA, MN US, 55987 TEL: 507 454 3611 FAX: 507 452 8195 Class: C MANUFACTURER CYTEC ENGINEERED MATERIALS, 0000101154 1191 HAWK CIR. ANAHEIM, CA US, 92807-1723 TEL: 714-632-8444-221 FAX: 714-632-7164 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 136 CYTEC ENGINEERED MATERIALS GMBH, INDUSTRIESTRASSE 3 OESTRINGEN, 05 DE, 76684 TEL: 7253 9128 FAX: 7253 912899 0000107090 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-4C TESTING OF THERMAL PROPERTIES (EXPANSIONS, TMA, ETC.) CYTEC ENGINEERED MATERIALS INC., 0000102289 4300 JACKSON ST. GREENVILLE, TX US, 75402-5721 TEL: 903-457-8512 FAX: 800-256-1090 Class: A SUBCONTRACTORS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Specification Controlled: BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR Page 233 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-4C TESTING OF THERMAL PROPERTIES (EXPANSIONS, TMA, ETC.) BAERD-GEN-018-4D TESTING OF FLAMMABILITY PROPERTIES BAERD-GEN-018-5G PLASTICS, RUBBERS (FORMERLY 1D) CYTEC ENGINEERED MATERIALS INC., 0000109291 1440 KRAEMER BLVD. N. ANAHEIM, CA US, 92806-1404 TEL: 903 453 3043 FAX: 800-256-1090 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: See EMCM CYTEC ENGINEERED MATERIALS INC., 0000107008 645 CYPRESS ST. N. ORANGE, CA US, 92867-6603 TEL: 903-453-3043 FAX: 800-256-1090 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM CYTEC ENGINEERED MATERIALS INC., 0000101729 1300 REVOLUTION ST. HAVRE DE GRACE, MD US, 21078-3800 TEL: 903 453 3043 FAX: 800-256-1090 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM CYTEC ENGINEERED MATERIALS LTD., 0000107733 ABENBURY WAY WREXHAM, CL GB, LL13 9UZ TEL: 9786 61971 FAX: 4401978665222 Class: C MANUFACTURER CYTEC PROCESS MATERIALS, 12801 ANN ST. SANTA FE SPRINGS, CA US, 90670 Class: C MANUFACTURER 0000107344 Page 234 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 562 906 3300 FAX: 562 941 9505 D-J COMPOSITES INC., 0000108786 1 C.L. DOBBIN DR. GANDER, NF CA, A1V 1W8 TEL: 709 256 6111-703 FAX: 709 256 6121 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... BAPS 260-03 POTTING OF HONEYCOMB SANDWICH PANELS CAPTIVE LABORATORY PSPEC 626 DECORATIVE FINISHED GLASS PHENOLIC & THERMOPLASTIC COMPONENTS A/C INTERIOR PSPEC 638 COMPOSITE AIR DUCTS FABRICATED USING PHENOLIC RESIN REIMPREGNATED GLASS FIBRE Specification Controlled with Limitations: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4C TESTING OF THERMAL PROPERTIES (EXPANSIONS, TMA, ETC.) BAERD-GEN-018-5H TEXTILES AND FIBROUS MATERIALS (FORMERLY 1F) BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: LIMITED TO PAINTERS CHRIS BARNES AND CLINT HARVEY BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: LIMITED TO MANUAL RIVITING ONLY BAPS 155-074 STRUCTURAL ADHESIVE BONDED ASSEMBLIES FOR USE UP TO 180 DEGREE F (250 DEGREE F CURE) Limitation: LIMITED TO WIRE MESH ONLY BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: EXCEPT FOR BRUSH COAT SEALING OF FASTENERS REF:WL:02/1875 Page 235 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation to type II only D-J ENGINEERING, INC., 0000130827 219 W. 6TH AVE. AUGUSTA, KS US, 67010 TEL: 316 775 1212 FAX: 316 775 1212 Class: A SUBCONTRACTORS D-J EXTRUDING L.C., 0000108669 723 E. SPRING AVE. CONWAY SPRINGS, KS US, 67031-8128 TEL: 620 456 3211 FAX: 620 456 3299 Class: C MANUFACTURER D.E.B. MFG. INC., 0000101120 850 TOWBIN AVE. LAKEWOOD, NJ US, 08701-5928 TEL: 732 364 7007 FAX: 732 364 7299 Class: B EQUIPMENT SUPPLIERS DAC INTERNATIONAL INC., 0000101490 6702 MCNEIL DR. AUSTIN, TX US, 78729-7799 TEL: 512-331-5323 FAX: 512 331 4516 Class: D DISTRIBUTOR DAESHIN AEROSPACE CO., 0000119411 74-1, YUCHEON-RI, SANAM MYUN Class: A SUBCONTRACTORS Specification Controlled: BAPS 136-120 POLISHING OF ALUMINUM ALLOY SKIN BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Touch-up only. BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Touch-up only. BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: Hardness inspection limited to Rockwell and Superficial testing only BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limitation: Liquid nitrogen installation only Specification Controlled: PPS 21.21 GENERAL SEALING PRACTICES Page 236 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval SACHEON, 06 KR, 664-942 TEL: 8255 854 2877 FAX: 8255 854 2876 DAHER AEROSPACE, 0000109129 23 ROUTE DE TOURS MONTRICHARD, 41 FR, 41401 TEL: 608162952 FAX: 2 54 71 1201 Class: C MANUFACTURER DAHER AEROSPACE S.A. DE C.V., 0000125473 CALZADA IND. NUEVO NOGALES 270 NOGALES, SON MX, 84094 TEL: 631 311 4850 FAX: 631 320 8096 Class: B EQUIPMENT SUPPLIERS DAHLGREN DUCK, 0000102252 4545 LANGLAND ROAD DALLAS, TX US, 75244 TEL: 972 478 5991 FAX: 972 478 5996 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods DAIKI SANGYO CO. LTD., 0000108142 93-1 OAZA-GENROKUWAJYU KISOZAKI-CHO MIE-KEN, 09 JP, 4989999 TEL: 0567 68 2458 FAX: 0567 68 2470 Class: A SUBCONTRACTORS Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 188-02 COLD WORKING OF HOLES PPS 02.70 INSTALLATION OF ADHESIVE BONDED FASTENERS PPS 21.21 GENERAL SEALING PRACTICES PPS 25.23 EC-1300 ADHESIVE PPS 25.50 RTV SILICONE ADHESIVES Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Limited to touch-up only. BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Limited to touch-up only. BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to type II application only. Page 237 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to type II application only. PPS 34.08 EPOXY PRIME Limitation: Limited to touch-up only. DALAU LTD., 0000108001 FORD ROAD CLACTON ON SEA, ES GB, CO15 3DZ TEL: 1255 220220 FAX: 1255 221122 Class: C MANUFACTURER DALIAN ECONOMY & TECHNIC EXPLOITURE, 0000125250 MOULD PRODUCE AREA, NO. 26 AREA EXPLOITURE AREA, 070 CN, 116600 TEL: 0411 876 3998... FAX: 0411 876 3994 Class: A SUBCONTRACTORS DALIAN SUNLIGHT MACHINERY CO., 0000122049 NO 39, TORCH ROAD, HIGH TECH ZONE DALIAN, 070 CN, 116024 TEL: 0411 84791781 FAX: 9999 99999999 Class: A SUBCONTRACTORS DALLAS AVIONICS INC., 0000101233 2525 SANTA ANNA AVE. DALLAS, TX US, 75228-1671 TEL: 214 320 9770 FAX: 214 320 1057 Class: D DISTRIBUTOR DAMPING TECHNOLOGIES INC., 0000108805 55656 CURRANT ROAD MISHAWAKA, IN US, 46545 TEL: 574 258 7916- FAX: 574 258 7911 Class: B EQUIPMENT SUPPLIERS DAN'S CERTIFIED WELDING INC., 9830 EVEREST ST. DOWNEY, CA US, 90242-3114 Class: A SUBCONTRACTORS 0000106914 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Specification Controlled with Limitations: BAPS 172-34 FUSION WELDING Limitation: LIMITED TO THE MATERIAL GROUP: IB & IV. Page 238 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 855-412-3818 FAX: 562-803-9529 DANAHER CONTROLS, 0000103584 2100 BROAD ST. W. ELIZABETHTOWN, NC US, 28337-8826 TEL: 910 862 2511 FAX: 910 862 5400 Class: C MANUFACTURER DANIELS MFG., 0000100962 526 THORPE ROAD ORLANDO, FL US, 32824-8133 TEL: 407 855 6161 FAX: 407 855 6884 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER DARCHEM ENGINEERING LTD., 0000117133 IRONMASTERS WAY STILLINGTON, SN GB, TS21 1LB TEL: 01740 630461 FAX: 01740 631523 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 172-34 FUSION WELDING BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 188-05 LASER CUTTING OF METALS CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Application of primer limited to manual touch up only DARCHEM INSULATION SYSTEMS, 0000103848 EASTBROOK ROAD EASTERN AVE. GLOUCESTER, GL GB, GL4 3DB TEL: 01452 317200 FAX: 01452 317201 Class: C MANUFACTURER DARCO PRODUCTS INC., Class: 0000136527 Systems with Limitations: Page 239 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 551 DARNELL MEALER ROAD LEWISBURG, TN US, 37091 TEL: 931-359-5603 FAX: 931-359-6198 C MANUFACTURER 0000 GENERAL LIMITATION / REMARKS Limitation: P/Ns NAS1301C4-4, NAS1301C8-4, NAS1301C6-4, NAS1301-4-4 & NAS1301C8-6 DARCO SOUTHERN INC., 0000108279 253 DARCO DR. INDEPENDENCE, VA US, 24348 TEL: 276 773 2711-201 FAX: (276) 773-020 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Tape T15DSI-3/8X1-1/2 TADPOLE, (P/N N384-9267) DASCO ENGINEERING CORP., 0000130910 24747 CRENSHAW BLVD. TORRANCE, CA US, 90275 TEL: 310 326 2277 FAX: 310 326 2277 Class: A SUBCONTRACTORS Specification Controlled: BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS DAUBERT CHEMICAL CO. INC., 0000122209 4700 S. CENTRAL AVE. CHICAGO, IL US, 60638-1531 TEL: 708 496 7350 FAX: 708 496 7367 Class: C MANUFACTURER DAVID CLARK CO. INC., 0000105555 360 FRANKLIN ST. WORCESTER, MA US, 01604-4916 TEL: 800 298 6235 FAX: 508 753 5827 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER DAVID H. SUTHERLAND & CO., INC., 5600 SW ARCTIC DRIVE. SUITE 110 Class: D DISTRIBUTOR 0000136775 Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Electro-Chemical Etch Marking Titanium ONLY . BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: To fillet seal using BAMS 552-008 Class B or MIL-PRF-81733 Type II Classs 1 Grade A sealant aroung bushings. BAPS 175-006 INSTALLATION OF BUSHING USING FORCEMATE COLD EXPANSION PROCESS Limitation: to Class 2 : Installation of special design ForceMate bushings. Page 240 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BEARVERTON, OR US, 97005 TEL: 503 626 8979 FAX: 503 526 0884 DAVIS AIRCRAFT PRODUCTS CO. INC., 0000100366 1150 WALNUT AVE. BOHEMIA, NY US, 11716-2196 TEL: 631 563 1500-176 FAX: 631 563 1117 Class: A SUBCONTRACTORS C MANUFACTURER Specification Controlled: BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS DAVIS AIRCRAFT PRODUCTS CO. INC., 0000134387 519 JOHNSON AVENUE BOHEMIA, NY US, 11716 TEL: 631 563 4975 FAX: 631 563 1117 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS Specification Controlled: BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 174-09 INSTALLATION OF WIGGINS TYPE COUPLINGS ON RIGID PLUMBING LINES BAPS 174-18 INSTALLATION OF DEUTSCHLITE DPL SERIES FITTINGS BAPS 174-19 ASSEMBLY AND INSTALLATION OF MINIATURE END SWAGED FITTINGS DAVTRON INC., 0000101039 427 HILLCREST WAY REDWOOD CITY, CA US, 94062-4012 TEL: 650 369 1188 FAX: 650 369 9988 Class: C MANUFACTURER E MAINTENANCE ORGANIZATION DAVWIRE, 0000128435 695 SOVEREIGN LONDON, ON CA, N5V 4K8 TEL: 519-451-0888-248 FAX: 519 451 2052 Class: A SUBCONTRACTORS Specification Controlled: BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING BAPS 145-004 INSTALLATION OF MECHANICALLY ATTACHED TERMINALS BAPS 145-006 TERMINATION OF THE SHIELD ON SHIELD ON SHIELDED WIRE AND CABLE BAPS 172-12 TINNING AND SOLDERING MPS 145-25 CERTIFICATION OF CRIMPING TOOL OPERATORS PPS 09.01 CRIMPING ELECTRICAL TERMINAL LUGS TO COPPER WIRE PPS 09.09 SPLICING ELECTRICAL WIRES PPS 09.19 AUTOMATIC CRIMPTING OF SIZE 16-22 ELECTRICAL CONTACTS PPS 09.20 CRIMPING OF SIZE 8 - 0 ELECTRICAL CONTACTS PPS 09.35 TERMINATING AND SPLICING ALUMINUM WIRES PPS 09.36 MANUAL CRIMPING OF SIZE 12 - 22 CONTACTS Page 241 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification DAWNLOUGH LTD, 0000132724 UNIT 13E GALWAY, GW IE, 00000 TEL: 391735528 FAX: 391735528 Class: A SUBCONTRACTORS DAYTON-GRANGER INC., 0000101082 3299 S.W. 9TH AVE. FORT LAUDERDALE, FL US, 33315-3026 TEL: 954-463-3451-331 FAX: 954 763 6838 Class: B EQUIPMENT SUPPLIERS DCM AERONAUTIQUE, 0000106917 519 PAPINEAU BOISBRIAND, QC CA, J7G 2B7 TEL: 450 435 9210-... FAX: 450 435 3378 Class: A SUBCONTRACTORS G INDIRECT PRODUCT Learjet Approved Suppliers Scope of Approval Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual riveting BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Wet installation of fasteners, faying surface for installation of nutplates & sealing application of bushes/bearings BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT Limitation: Wet installation of fasteners & faying surface for installation of nutplates BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Limitation: Roller swaging for bearing MS14101-4 BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Installation by liquid nitrogen Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 188-02 COLD WORKING OF HOLES MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING Specification Controlled with Limitations: BAPS 132-03 SWAGING OF TUBES Page 242 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval Limitation: Limited to Aluminum tube BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Type 2, touch up only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Type 2, touch up only BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: metal to metal elctrical bonding. BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Limited to cotter pins installation only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limitation: manual rivet installation BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to Typ 2 Brush and Prep pen Application only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limired to Typ 2 Brush and Prep pen Application only BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Limitation: Limitation to anvil swaging only BAPS 185-000 GRINDING OF STEEL PARTS Limitation: Limited to external surface only BAPS 185-01 BARREL AND VIBRATORY FINISHING Limitation: Limited to aluminum alloy with out clad only MPS 250-201 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES AEROSPATIALE A330/A340 PROGRAM Limitation: limited to Non-Intrusive Marking Method only DE HAVILLAND INC., 0000600006 123 GARRATT BLVD. TORONTO, ON CA, M3K 1Y5 TEL: 416 633 7310 FAX: 416 375 4546 Class: A SUBCONTRACTORS DE VORE AVIATION CORP. AMERICA, 0000101878 6104-B JEFFERSON N. E. ALBUQUERQUE, NM US, 87109-3410 TEL: 505-585-5634 FAX: 505 344 3835 Class: B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: P/N: 60633108-1 & 60633038 Page 243 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification DEAN TECHNOLOGY INC., 0000107723 1000 LUCERNE ROAD LUCERNEMINES, PA US, 15754 TEL: 724-479-3533 FAX: 972-381-9998 Class: B EQUIPMENT SUPPLIERS DEANE & CO., 0000106919 190 CHEMIN ONEIDA POINTE-CLAIRE, QC CA, H9R 1A8 TEL: 514-697-3730 FAX: 514-697-9838 Class: C MANUFACTURER D DISTRIBUTOR DECOUPAGE INDUSTRIEL PRECISION, 0000106920 Z.I. FERRIERES-EN-GATINAIS FERRIERES, 45 FR, 45210 TEL: 33 2 38 96 52 87 FAX: 2 38 96 55 10 Class: C MANUFACTURER DEJOND NV, 0000130763 TERBEKEHOFDREEF55-59 WILRIJK, 01 BE, 2610 TEL: 32 3 820 34 11 FAX: 32 3 820 35 11 Class: C MANUFACTURER DEL AEROSPACE INC., 0000114388 921-A MOUNTAIN VIEW AVE. OXNARD, CA US, 93030 TEL: 805 486 1610 FAX: 805 486 9659 Class: C MANUFACTURER DELASTEK INC., 0000103818 2699 5EME AVE., LOCAL 14 SHAWINIGAN, QC CA, G9T 5K7 TEL: 819 533 5788-221 FAX: 819 533 3494 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS C MANUFACTURER Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Specification Controlled with Limitations: Page 244 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING Limitation: Par. 7.6 Installation of Terminal Lugs to Terminal Block Assemblies BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual Installation Only BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: ONLY TO INSTALL FASTENERS BY DWG BA670-41059 Limitation: ONLY TO INSTALL FASTENERS BY DWG BA670-41059 Limitation: ONLY TO INSTALL FASTENERS BY DWG 601R41211, 601R41230, 604-41211 & 604-42011 DELFINGEN US - NEW YORK, INC., 0000108475 2221 NIAGARA FALLS BLVD. NIAGARA FALLS, NY US, 14304-5709 TEL: 716 215 0300 FAX: 716 215 0304 Class: C MANUFACTURER DELFINGEN US INC, 0000133367 3985, W HAMLIN ROAD ROCHESTER, MI US, 48309 TEL: 248 230 3500 FAX: 514 855 5000 Class: C MANUFACTURER DELL CANADA INC., 0000121955 155 GORDON BAKER, SUITE 501 TORONTO, ON CA, M2H 3N5 TEL: 416 758 2100 FAX: 866 884 5022 Class: H COMMERCIAL OFF THE SHELF DELLCOM AEROSPACE INC., 0000101768 301 MILLWAY AVE. CONCORD, ON CA, L4K 4T3 TEL: 905-761-0808-204 FAX: 905 761 0809 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: NOT AUTHORIZED TO MANUFACTURE PARTS WITH MOLDLINES. Specification Controlled: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Page 245 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limitation to non intrusive method only. DELORO STELLITE INC., 0000106922 471 DUNDAS ST. E. BELLEVILLE, ON CA, K8N 1G2 TEL: 613 968 3481 FAX: 613 966 8269 Class: A SUBCONTRACTORS C MANUFACTURER DELTA ELECTRONICS MFG. CORP., 0000109693 416 CABOT ST. BEVERLY, MA US, 01915-3195 TEL: 978 927 1060 FAX: 508 922 6430 Class: C MANUFACTURER DELTA ILLESCAS, 0000120418 PARQ. IND. Y TECNOLOGICO SENORIO DE ILLESCAS, 45 ES, 45200 TEL: 9864 87044 FAX: 9864 86959 Class: A SUBCONTRACTORS Specification Controlled: PPS 20.03 PENETRANT FLAW DETECTION PPS 20.08 HARDNESS TESTING PPS 35.07 REQUIREMENTS FOR INVESTMENT AND SAND CASTINGS Specification Controlled: BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES BAPS 188-08 MACHINING OF COMPOSITES Specification Controlled with Limitations: BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS Limitation: Limited to Manual Pulse Echo A Scan Only BAPS 260-05 MANUFACTURE OF RESIN TRANSFER MOLDED (RTM) FIBER REINFORCED COMPOSITE COMPONENTS Limitation: Limitation: Conditional Approval granted until First Part Qualification is completed. DEMA S.P.A., 0000121383 VIA S. SOSSIO 38 SOMMA VESUVIANA, NA IT, 80049 TEL: 081 893 4108 FAX: 081 893 4077 Class: F STRUCTURAL SUPPLIER Systems with Limitations: 2101 MRB APPROVAL - MINOR ONLY Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND Page 246 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 168-15 STRESS RELIEF OF METALS BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 186 CHEMICAL MILLING OF ALUMINUM BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC Page 247 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval ASSEMBLIES CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Limited to oven ID T08004 for the 70 – 93°C (160 – 200°F) temperature range Limitation: Limited to oven ID T08004 for the 70 – 93°C (160 – 200°F) temperature range Limitation: Applicable for Primer and Topcoat BAPS 150-019 INSTALLATION OF COLD EXPANDED RIVETLESS NUT PLATES Limitation: Limited to class of fit II BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: LIMITED to: ‘‘Manual Installation of Rivets’’ ONLY. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Touche-up only (Type2) ; Type 2 Manual Aplication - Alodine 1132 Touch and Prep Pen for electrical bonding BAPS 161-007 APPLICATION OF MIL-L-46010 SOLID FILM LUBRICANT Limitation: Part Number C02313300-001 Avionic Door Only BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL Limitation: Limitation to type II only BAPS 188-02 COLD WORKING OF HOLES Limitation: Limited to TYPE I BAPS 188-08 MACHINING OF COMPOSITES DEMA S.P.A., 0000129807 11100 L-H. LAFONTAINE MONTREAL, QC CA, H1J 2Y5 TEL: 514 356 3246 FAX: 514 356 3741 Class: F STRUCTURAL SUPPLIER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: BAPS 150-019 INSTALLATION OF COLD EXPANDED RIVETLESS NUT PLATES BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT Specification Controlled with Limitations: Page 248 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: to touch up only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: to touch up only BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: to assemble, prepare surface only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: for manual application only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: to type II application only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: to type II application only BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limited to cold installation on VNCR DEMA S.P.A., 0000133215 VIA ENRICO MATTEI, 12 BRINDISI, BR IT, 72100 TEL: 0831540679 FAX: 0523523127 Class: A SUBCONTRACTORS DENCO AEROSPACE INC., 0000101525 2605 CENTRAL GRAND PRAIRIE, TX US, 75050-6231 TEL: 514-696-7499 FAX: 514-696-8390 Class: D DISTRIBUTOR DENNIS D EVANS & COMPANY LTD, 0000131396 391 HOLYWOOD ROAD BELFAST, AT GB, BT4 2LS TEL: 514 855 5000 FAX: 514 855 5000 Class: C MANUFACTURER DENROY PLASTICS LTD., 0000109937 9-11 BALLOO DR. BANGOR, DN GB, BT19 7QY TEL: 028 91474822 FAX: 028 91277553 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Specification Controlled: BAPS 157-27 INTEGRAL FUEL TANK SEALING - Page 249 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification DESIGNED METAL CONNECTIONS INC., 0000101276 14800 S. FIGUEROA ST. GARDENA, CA US, 90248-1719 TEL: 310-217-3196 FAX: 310 329 2505 Class: C MANUFACTURER DESIGNED METAL CONNECTIONS INC., 0000106480 2979 N. ONTARIO ST. BURBANK, CA US, 91504-2017 TEL: 818 841 6004 FAX: 818 841 1793 Class: C MANUFACTURER D DISTRIBUTOR DESIGNED PRECISION CASTINGS INC., 0000107736 75 EASTERN AVE. BRAMPTON, ON CA, L6W 1X9 TEL: 905 453 0421 FAX: 905 453 3694 Class: A SUBCONTRACTORS DETCO INDUSTRIES, 0000136090 2421 ALBION FAIRMONT, MN US, 56031 TEL: 507 235 6188 FAX: 507 235 6199 Class: C MANUFACTURER DEUTSCHE EDELSTAHLWERKE GMBH, 0000119330 OBERE KAISERSTRASSE SIEGEN, 05 DE, 57078 TEL: 00 49 271 808... FAX: 00 49 271 808 Class: C MANUFACTURER DEVTEK AEROSPACE INC., 0000105833 3675 INDUSTRIEL BLVD. LAVAL, QC CA, H7L 4S3 TEL: 450 629 3454-... FAX: 450 629 6020 Class: B EQUIPMENT SUPPLIERS DEWAL INDUSTRIES INC., 15 RAY TRAINOR DR. NARRAGANSETT, RI Class: C MANUFACTURER 0000106927 Learjet Approved Suppliers Scope of Approval Specification Controlled: PPS 20.03 PENETRANT FLAW DETECTION PPS 20.08 HARDNESS TESTING PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS PPS 35.07 REQUIREMENTS FOR INVESTMENT AND SAND CASTINGS Page 250 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 02882-1105 TEL: 401 789 9736 FAX: 401 783 6780 DEXMET CORPORATION, 0000125873 22 BARNES INDUSTRIAL ROAD SOUTH WALLINGFORD, CT US, 06492-2462 TEL: 203 294 7867 FAX: 203 294 7898 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM no. 1086 DHAP AEROSPACE PIPES & DUCTS, 0000110902 LONG CLOSE, DOWNTON SALISBURY, WI GB, SP5 3HS TEL: 01725 513639 FAX: 01725 513698 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-3E WELDING EVALUATION BAPS 172-34 FUSION WELDING BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 174-09 INSTALLATION OF WIGGINS TYPE COUPLINGS ON RIGID PLUMBING LINES BAPS 174-16 ASSEMBLY AND INSTALLATION OF SIERRACIN/HARRISON SLEEVES AND UNIONS ON PLUMBING LINES BAPS 176-02 FLUORESCENT PENETRANT INSPECTION PPS 06.13 INSTLLATION FO PERMASWAGE FITTINGS PPS 06.14 ASSEMBLY OF WIGGINS SWAGED CONNECTORS PPS 06.19 INSTALLATION OF SIERRACIN/HARRISON INTERNAL ROLLER SWAGE FITTINGS PPS 37.03 FUSION WELDING OF ALUMINUM AND ALUMINUM ALLOYS PPS 37.04 FUSION WELDING OF FERROUS AND NICKEL ALLOYS PSPEC 205 THE BENDING AND FLARING OF PIPES AND DUCTS PSPEC 235 ASSEMBLY OF PERMASWAGE FITTINGS PSPEC 300 PENETRANT FLAW DETECTION PSPEC 305 RADIOGRAPHIC EXAMINATION PSPEC 501 MANUAL ARGON ARC WELDING PSPEC 504 RESISTANCE SPOT AND SEAM WELDING OF AUSTENITIC CORROSION RESISTANT STEELS AND NICKEL BASED SUPER ALL PSPEC 509 BRAZING OF AUSTENITIC STEELS, ALUMINIUM ALLOYS & NICKEL ALLOYS PSPEC 801 MANUAL INSTALLATION AND REMOVAL OF SOLID RIVETS DIAB GROUP, 0000108490 315 SEAHAWK DR. DESOTO, TX US, 75115-2419 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 811 Page 251 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 972 228 7600 FAX: 972 228 2667 DIALIGHT CORP., 0000102880 1501 ROUTE 34 FARMINGDALE, NJ US, 07727-3932 TEL: 732 919 3119 FAX: 732 751 5778 Class: C MANUFACTURER DIALIGHT CORP., 0000106929 315 INDUSTRIAL DR. ROXOBORO, NC US, 27573-6181 TEL: 732 751 5836 FAX: 732 751 3136 Class: C MANUFACTURER DIAMOND J INC., 0000101470 2020 W. HARRY WICHITA, KS US, 67213-3256 TEL: 316 264 0600 FAX: 316 264 0060 Class: B EQUIPMENT SUPPLIERS DIAMOND MFG. CO., 0000108701 243 8TH ST. W. WYOMING, PA US, 18644-1609 TEL: 570 693 0300 FAX: 570 693 3500 Class: C MANUFACTURER DIEHL AEROSPACE GMBH, 0000110712 DONAUSTRABE 120 NURNBERG, 09 DE, 90451 TEL: 205 678-7101-113 FAX: 911 9494 499 Class: B EQUIPMENT SUPPLIERS DIEHL AIRCABIN GMBH, 0000131959 AM FLUGPLATZ LAUPHEIM, 08 DE, 88471 TEL: 49 73 92 703 ... FAX: 49 73 92 703 Class: B EQUIPMENT SUPPLIERS DIEHL SERVICE MODULES GMBH, VIERENKAMP 1 HAMBURG, 02 Class: A SUBCONTRACTORS 0000107698 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limitation to Learjet Programs ONLY Limitation: Limited to MS25041-7 Press to Test Indicator Page 252 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval DE, 22453 TEL: 40 528722 839 FAX: 49 528 722 11 DIGI-KEY CORP., 0000101335 701 S. BROOKS AVE. THIEF RIVER FALLS, MN US, 56701-2757 TEL: 1-800-344-4539 FAX: 218 681 3380 Class: D DISTRIBUTOR DIGITAL PRECISION INC., 0000106931 185 DU PACIFIQUE LAVAL, QC CA, H7N 3X9 TEL: 450-668-4601 FAX: 450 668 6722 Class: A SUBCONTRACTORS DILL AIR CONTROLS PRODUCTS LLC., 0000104597 1500 WILLIAMSBORO ST. NORTH CAROLINA, NC US, 27565-3461 TEL: 919 692 2300 FAX: 919 692 2301 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to the Valve SK20420 ONLY DIMCO GRAY, 0000103606 900 DIMCO WAY CENTERVILLE, OH US, 45458 TEL: 937 433 7600 FAX: 937 433 0520 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limitation to 2-R Rivets Series DISPLETECH, 0000111022 50 GINCE ST. ST-LAURENT, QC CA, H4N 2W6 TEL: 514 381 2396 FAX: 514 381 9127 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods DISTRIBUTION CENTRALE LTEE., 0000110450 350 DES ERABLES LACHINE, QC CA, H8S 2P9 TEL: 514 364 4980 FAX: 514 364 9750 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: approval limited to Koss Headsets Limitation: approval limited to Koss Headsets Limitation: Limited to Commercial off the shelf goods DIT-MCO INTL. CORP., Class: 0000107738 Page 253 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 5612 BRIGHTON TER. KANSAS CITY, MO US, 64130-4599 TEL: 816 444 9700- FAX: 816 444 9737 A SUBCONTRACTORS DIXIE AEROSPACE INC., 0000106936 473 DIVIDEND DR. PEACHTREE CITY, GA US, 30269-1940 TEL: 678 490 0166 FAX: 678 490 0142 Class: D DISTRIBUTOR DME CORP., 0000103412 6830 N.W. 16TH TERRACE FORT LAUDERDALE, FL US, 33309-1518 TEL: 954 975 2163 FAX: 954 979 3313 Class: C MANUFACTURER DME ELECTRONICS, INC, 0000107585 170 CAIN DR. HAYSVILLE, KS US, 67060-2003 TEL: 316 529 2441 FAX: 316 529 2541 Class: C MANUFACTURER DODCO INC., 0000102006 3775 N. HOLTON ST. MILWAUKEE, WI US, 53212-1606 TEL: 414 962 8870 FAX: 414 962 8849 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods DOLPHIN MACHINE INC., 0000106939 2939 BROOKS PARK DR. NORTH LAS VEGAS, NV US, 89030-3956 TEL: 702 642 0075 FAX: 702 642 1006 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: NOT AUTHORIZED TO MANUFACTURE PARTS WITH MODLINE Specification Controlled: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Specification Controlled with Limitations: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: LIMITED TI INSTALLATION OF COTTER PIN AND METHOD 1 (LOCK WIRE) BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF Page 254 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval METALS Limitation: LIMITED TO HARDNESS TESTING ONLY BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: NOT APPROVED FOR HOUSING HEATING METHOD DOMINMARC INC., 0000126947 930 BEGIN ST-LAURENT, QC CA, H4M 2N5 TEL: 514 335 0700 FAX: 514 335 7605 Class: H COMMERCIAL OFF THE SHELF DOMINO UK LTD., 0000120740 PARK LANE, BOOTLE LIVERPOOL, MY GB, L40 0UA TEL: 01954 782551 FAX: 01954 782874 Class: C MANUFACTURER DONALDSON CO. INC., 0000107875 815 PROGRESS DR. DIXON, IL US, 61021-9609 TEL: 952-887-3729 FAX: 952-887-3221 Class: B EQUIPMENT SUPPLIERS DONCASTERS CHARD, 0000110047 BEECHING CLOSE CHARD, SO GB, TA20 1BB TEL: 0146062892 FAX: 0146067702 Class: C MANUFACTURER DONCASTERS INC. STORMS FORGE DIV., 0000107428 160 COTTAGE ST. SPRINGFIELD, MA US, 01104-3250 TEL: 413 785 1801 FAX: 413 785 5680 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM DONTAUR ENGINEERING LTD., 0000109940 WAKEHURST ROAD WAKEHURST IND E, UNIT C BALLYMENA, AT GB, BT42 3AZ TEL: 44-02825 659886 FAX: 44-02825 42487 Class: A SUBCONTRACTORS Specification Controlled: BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM supplier #1056 Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: LIMITED TO MANUAL RIVETING ONLY Page 255 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: LIMITED TO FAYING SEALING AND WET INSTALLATION OF FASTENERS BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT Limitation: LIMITED TO FAYING SEALING AND WET INSTALLATION OF FASTENERS ONLY BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limited to Freeze Fitting of Bushes using Liquid Nitrogen DOUGLASS INTERIOR PRODUCTS INC., 0000101209 1910 - 132 AVE. N.E. BELLEVUE, WA US, 98005 TEL: 800 722 7272 FAX: 425 451 4779 Class: D DISTRIBUTOR DOVER FINISHING PRODUCTS, 0000110505 3245 J.B. DESCHAMPS LACHINE, QC CA, H8T 3E4 TEL: 514 420 6030 FAX: 514 420 6015 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods DOVER INLAY MFG., 0000110506 10226 GOVERNOR LAND BLVD. WILLIAMSPORT, MD US, 21795-4093 TEL: 301 223 8620 FAX: 301 223 9687 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods DOW CORNING (USA), 0000110137 760 HODGENVILLE ROAD ELIZABETHTOWN, KY US, 42701 TEL: 514 555 1212 FAX: 999 999 9999 Class: C MANUFACTURER DOW CORNING CORP., 0000103537 2200 SALZBURG ROAD W. MIDLAND, MI US, 48640-8531 TEL: 989-496-4400 FAX: 517 496 5324 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM #154 Page 256 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval DOW CORNING CORP., 0000108336 2914 PATTERSON ST. GREENSBORO, NC US, 27407-3337 TEL: 336 547 7100 FAX: 999 999 9999 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM #152 DOW CORNING CORPORATION, 0000136906 5300 11 MILE ROAD AUBURN, MI US, 48611 TEL: 989 496 7000 FAX: 514 855 5000 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM #1152 DOW CORNING GMBH, 0000136912 RHEINGAUSTRASSE 34 WIESBADEN, 06 DE, 65201 TEL: 49 611 2371 FAX: 514 855 5000 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM #1153 DOW KEY MICROWAVE CORP., 0000101453 4822 MCGRATH ST. VENTURA, CA US, 93003-7718 TEL: 805 650 0260 FAX: 805 650 1734 Class: C MANUFACTURER DOW-ELCO INC., 0000103538 1313 W. OLYMPIC BLVD. MONTEBELLO, CA US, 90640-5010 TEL: 323 723 1288 FAX: 323 721 6305 Class: A SUBCONTRACTORS C MANUFACTURER DOWELS PIN & SHAFTS INC., 0000106943 1975 F CALUMET ST. CLEARWATER, FL US, 33765 TEL: 727 461 1255 FAX: 727 441 8341 Class: C MANUFACTURER DOWTY AEROSPACE PROPELLERS, ANSON BUSINESS PARK GLOUCESTER, GL GB, GL2 9QN Class: C MANUFACTURER 0000107862 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 257 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 145 271 62161 FAX: 145 271 6169 DOWTY PROPELLERS, 0000135984 BISHOPS CLEEVE CHELTENHAM, GL GB, GL52 8SF TEL: 44 1452 716000 FAX: 44 1452 716001 Class: B EQUIPMENT SUPPLIERS DOWTY PROPELLERS REPAIR & OVERHAUL, METEOR BUSINESS PARK GLOUCESTER, GL GB, GL2 9QL TEL: 1452 716 000 FAX: 1452 716215 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: EASA approval DQ6Y661X & FAA Repair Station dual approval UK.145.00304. 0000120165 DPF ENGINEERING, 0000134824 UNIT 2 POLLERTON INDUSTRIAL ESTATE HACKETSTOWN RD. CARLOW, CW IE, AAA AAA TEL: 353 5991 86591 FAX: 999 999 9999 Class: A SUBCONTRACTORS DPI LABS. INC., 0000101424 1350 ARROW HWY. LA VERNE, CA US, 91750-5218 TEL: 9093925777-248 FAX: 909 392 0277 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER DRAKA CABLETEQ USA, 0000111066 22 JOSEPH E. WARNER BLVD. NORTH DIGHTON, MA US, 02764-1300 TEL: 508 822 5444 FAX: 508 822 1944 Class: C MANUFACTURER DRAKA FILECA, 0000131686 D 1001 SAINTE-GENEVIEVE SAINTE-GENEVIEVE, 60 FR, 60730 TEL: 5088386131 FAX: 344089886 Class: C MANUFACTURER DRAKE AIR, 0000133794 4085 SOUTHWEST BLVD TULSA, OK Class: E MAINTENANCE ORGANIZATION Page 258 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval US, 74107 TEL: 800 542 6899 FAX: 918 437 1418 DRETLOH AIRCRAFT SUPPLY INC., 0000103956 2830 E. LA CRESTA AVE. ANAHEIM, CA US, 92806-1816 TEL: 714 632 6982 FAX: 714 632 6739 Class: C MANUFACTURER DRI RELAYS INC., 0000106925 60 COMMERCE DRIVE HAUPPAUGE, NY US, 11788-4007 TEL: 631-840-3267 FAX: 631 840 3257 Class: C MANUFACTURER DRJ TECHNOLOGIES, 0000108660 257 HELICOPTER CIR. CORONA, CA US, 92880-2532 TEL: 951-372-2870 FAX: 951-372-2876 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval QKXR998L & EASA dual approval EASA.145.4611. DROITCOUR CO., 0000106947 28 GRAYSTONE ST. WARWICK, RI US, 02886-1316 TEL: 401-737-4646 FAX: 401-738-6256 Class: C MANUFACTURER DRS TECHNOLOGIES CANADA LTD., 0000136268 115 EMILY STREET CARELTON PLACE, ON CA, K7C 4J5 TEL: 613-253-7239 FAX: 613-253-3033 Class: B EQUIPMENT SUPPLIERS DTSYSTEMS CORP., 0000110507 11136 WASHINGTON BLVD. CULVER CITY, CA US, 90232 TEL: 310 839 9234 FAX: 310 839 2274 Class: H COMMERCIAL OFF THE SHELF DUBLIN AEROSPACE LIMITED, HANGAR 5, DUBLIN AIRPORT Class: E MAINTENANCE ORGANIZATION 0000137722 Page 259 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval DUBLIN, DB IE, 99999 TEL: 514-855-5000 FAX: 514-855-5000 DUCOMMUN AEROSTRUCTURES, 0000106957 171 STACEY ROAD COXSACKIE, NY US, 12051 TEL: 518 731 4600 FAX: 518 731 6333 Class: A SUBCONTRACTORS DUCOMMUN AEROSTRUCTURES, 0000107940 268 GARDENA BLVD. E. GARDENA, CA US, 90248-2814 TEL: 310-380-5322 FAX: 310 380 5238 Class: A SUBCONTRACTORS Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Specification Controlled: BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAPS 136-120 POLISHING OF ALUMINUM ALLOY SKIN BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 PPS 01.02 FORMING ALUMINUM ALLOYS PPS 01.03 HOT JOGGLING OF ALUMINUM ALLOYS PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Manual Touch-up to surfaces less than 4 sqin total BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Manual Touch-up to surfaces less than 4 sqin total BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: ‘’Manual riveting’’ only Page 260 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: 1. Application to surfaces less than 4 sqin total coating (no more than 1" width) Limitation: 2. The user has to have monthly records for coating weight per Henkel Technical Limitation: Process Bulletin, for each application. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation to type II only BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: Limitation to Artificial aging of Aluminum Limitation: Aging Furnace ( # 3 & # 4 ) Class 5 Type A to the artificial aging treatment of the described Limitation: material between 225 and 375 degree Fahrenheit . BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: RUAG manufactured & components only (SAP Vendor codes #122830 & 122829) BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Limitation: Limited to local inspection using aerosol method MPS 250-201 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES AEROSPATIALE A330/A340 PROGRAM PPS 32.35 CHEMICAL CONVERSION COATING FOR LOW ELECTRICAL RESISTANCE (C10) Limitation: Limitation to Touch-up of scratches for surfaces areas less than 4 square inches ONLY . PSPEC 300 PENETRANT FLAW DETECTION Limitation: Limited to local inspection using aerosol method DUCOMMUN AEROSTRUCTURES - GUAYMAS, 0000129946 CARRETERA NORTE KM 129 GUAYMAS, SON MX, 85400 TEL: 310 380 5246 FAX: 310 380 5225 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Limited to: Aluminum parts without shoot peening and components made of carbon alloys or corrosion resistant Page 261 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval steels, titanium, copper and nickel alloys. Limitation: Limited to: Convection oven EQ-00308 at the qualified temperature range of 100 °F to 180 °F. BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to Manual application only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to type 2 Manual Application- Alodine 1132 Trouch and Prep Pen BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: limited to type 2 manual application alodine 1132 Touch and Prep Pen BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: Limited to: Limitation: Aluminum Sheet on Air furnace #4: Solution Heat Treat temperature range from 815°F to 985°F with 10°F temperature uniformity Limitation: Artificial Aging Air Furnace #3: Aging at 215°F to 450°F with 10°F temperature uniformity. DUCOMMUN AEROSTRUCTURES INC., 0000104625 1855 N. BATAVIA ST. ORANGE, CA US, 92865 TEL: 714-637-4401 FAX: 714-974-2462 Class: A SUBCONTRACTORS Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 180-001 ALKALINE CLEANING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 186 CHEMICAL MILLING OF ALUMINUM CAPTIVE LABORATORY MPS 250-022 CHEMICAL MILLING OF ALUMINUM ALLOYS MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 PPS 01.02 FORMING ALUMINUM ALLOYS PPS 42.01 CHEMICAL MILLING OF ALUMINUM AND ALUMINUM ALLOYS Page 262 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PSPEC 706 CHEMICAL MILLING OF ALUMINIUM ALLOYS Specification Controlled with Limitations: MPS 250-201 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES AEROSPATIALE A330/A340 PROGRAM Limitation: Limitation to Ink Marking Only DUCOMMUN AEROSTRUCUTRES PARSONS, 0000107646 3333 MAIN ST. PARSONS, KS US, 67357-3632 TEL: 620 421 3400 FAX: 620 421 2301 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-14 HEAT TREATMENT OF STEELS BAPS 168-15 STRESS RELIEF OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 186-03 CHEMICAL MILLING OF TITANIUM & TITANIUM ALLOYS Specification Controlled with Limitations: BAERD-GEN-018-5E EVALUATION OF PAINTS Limitation: Limited to adhesion and thickness tests DUCOMMUN TECHNOLOGIES INC., 0000101131 23301 WILMINGTON AVE. S. CARSON, CA US, 90745-6209 TEL: 310 513 7298 FAX: 310 513 7298 Class: C MANUFACTURER DUKANE CORP. *CC, 0000101115 7135 16TH STREET EAST, STE 101 SARASOTA, FL US, 34243 TEL: 941 739 3200 FAX: 941 739 3201 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION DUKES INC., 0000101537 9060 WINNETKA AVE. NORTHRIDGE, CA US, 91324-3235 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval WU2R279L & EASA dual approval EASA.145.4391. Page 263 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 818-350-1926 FAX: 818 700-8361 DUMOULIN - HERSTAL SA, 0000132108 RUE DU TIGE NO13 HERSTAL, 04 BE, 4040 TEL: 3242288960 FAX: 3242288960 Class: A SUBCONTRACTORS DUNCAN AVIATION, 0000101260 LINCOLN MUNICIPAL AIRPORT LINCOLN, NE US, 68524 TEL: 402 475 2611-... FAX: 402 479 4213 Class: Systems with Limitations: D DISTRIBUTOR 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval JGVR194F & EASA dual approval EASA.145.4392. DUNKIRK SPECIALTY STEEL LLC., 0000114890 830 BRIGHAM ROAD DUNKIRK, NY US, 14048-3473 TEL: 716 366 1000 FAX: 716 366 0478 Class: C MANUFACTURER DUNLOP AIRCRAFT TYRES LTD., 0000106950 40 FORT PKWY. ERDINGTON BIRMINGHAM, WM GB, B24 9HL TEL: 0121 627 7302 FAX: 1213 777150 Class: C MANUFACTURER DUPONT DE NEMOURS EI & CO., 0000106973 3115 RIVER ROAD BUFFALO, NY US, 14207-1059 TEL: 716 876 4420 FAX: 716 879 4692 Class: C MANUFACTURER DUPONT VESPEL PARTS & SHAPES INC., 0000117995 6200 HILLCREST DR. VALLEY VIEW, OH US, 44125-4624 TEL: 216 901 3606 FAX: 216 901 2641 Class: A SUBCONTRACTORS DURACOTE CORP., 0000109698 350 N. DIAMOND ST. RAVENNA, OH Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM supplier #606 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: See EMCM Page 264 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 44266-2155 TEL: 330 296 9600 FAX: 330 296 5102 DURKEE TESTING LABS. INC., 0000106954 15700 TEXACO ST. PARAMOUNT, CA US, 90723-3924 TEL: 562-531-7111-245 FAX: 562 531 7137 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS INDEPENDANT LABORATORY DURO-LAK INC., 0000106502 3020 LE CORBUSIER Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 265 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification LAVAL, QC CA, H7L 3W2 TEL: 450-687-4140 FAX: 450-687-9886 Scope of Approval Limitation: PROGRAM: INTERIOR DUTCH VALLEY, 0000101599 970 PROGRESS CENTER AVE. LAWRENCEVILLE, GA US, 30043-4803 TEL: 770-513-0612 FAX: 770 513 0716 Class: D DISTRIBUTOR DYNAMET INC., 0000106958 195 MUSEUM ROAD WASHINGTON, PA US, 15301-6135 TEL: 724-229-4297 FAX: 724-229-4173 Class: C MANUFACTURER DYNAMIC AIR ENGINEERING INC., 0000110212 620 DYER ROAD E. SANTA ANA, CA US, 92705-5612 TEL: 714 540 1000 FAX: 714 545 9145 Class: B EQUIPMENT SUPPLIERS DYNAMIC NC, 0000137027 16531 SW 190TH ROAD ROSE HILL, KS US, 67133 TEL: 316 712 5028 FAX: 514 855 5000 Class: A SUBCONTRACTORS DYNAMO AVIATION INC., 0000102249 16760 SCHOENBORN ST. NORTH HILLS, CA US, 91343 TEL: 818-785-9561-253 FAX: 818 785 2892 Class: Systems with Limitations: C MANUFACTURER 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval LZ3R676L & EASA dual approval EASA.145.4394. DYNAMOLD, 0000127426 2905 SHAMROCK AVE. FORT WORTH, TX US, 76107 TEL: 817 335 0862 FAX: 817 877 5203 Class: C MANUFACTURER DYNOMAX, Class: 0000126492 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM #507 Page 266 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 956 CAMPUS DR. MUNDELEIN, IL US, 60060-3803 TEL: 847 680 8833 FAX: 847 850 2622 A SUBCONTRACTORS C MANUFACTURER DYNOMAX, 0000127916 708 ARMSTRONG DR. BUFFALO GROVE, IL US, 60089 TEL: 847 215 8833 FAX: 847 537 8838 Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 180-001 ALKALINE CLEANING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY Specification Controlled with Limitations: BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) Limitation: BATS 3211 BAERD-GEN-018-5E EVALUATION OF PAINTS Limitation: BATS 4002 and BATS 4860 Type I Class 5 only BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: > Paint Booth (Asset # 574) at a nominal operating range of 90°F to 120°F, per sub-specification BAERD GEN-007 Class 15 Type C , including RFDs # 8519 a Limitation: > GFS Batch process oven ( S/N: U44537A ) at a nominal operating range of 120°F to 175°F. per AMS 2750 Class 3 Type D . BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Ty 1_ Immersion process Limitation: Ty 2_ Manual process for electrical bonding BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Limitation: Type 1, Method A, Penetrant Sensitivity 3, Developer Form a total loss system Page 267 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval DYNOMAX INC., 0000128152 1535 ABBOTT DR. WHEELING, IL US, 60090 TEL: 847 325 6663 FAX: 847 680 8838 Class: A SUBCONTRACTORS C MANUFACTURER Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS DYSOL INC., 0000105802 2901 SHAMROCK AVE. FORT WORTH, TX US, 76107 TEL: 817 335 1826 FAX: 817 877 5203 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 755 E & H LAMINATING & SLITTING CO., 0000106960 138 GRAND ST. PATERSON, NJ US, 07501-2639 TEL: 973 345 1725 FAX: 973 345 3224 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM E & M INDUSTRIES INC., 0000101023 503 FERGUS HENNING, MN US, 56551-4036 TEL: 218 583 4625 FAX: 218 583 4534 Class: B EQUIPMENT SUPPLIERS Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Limited to touch-up BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Limited to touch-up BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to AFA-MM and IFI-MM BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Installation of cotter pins ONLY . BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: MANUAL RIVETING ONLY BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: EXCEPT SEALING OF FASTENERS HEAD BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Limitation: ROLLER SWAGING ONLY BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: COOLING MEDIA _Liquid Nitrogen ONLY Page 268 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification E-A-R SPECIALTY COMPOSITES, 0000106963 7911 ZIONSVILLE ROAD INDIANAPOLIS, IN US, 46268-1650 TEL: 317 692 3004 FAX: 317 692 3111 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER E-T-A ELEKTROTECHNISHE APPARATE GMB, INDUSTRIESTRABE 2-8 ALTDORF, 09 DE, 90518 TEL: 9187 10 420 FAX: 9187 933 420 Class: C MANUFACTURER 0000120144 Scope of Approval E. I. DU PONT DE NEMOURS & CO., 0000106953 350 BELLEVUE ROAD NEWARK, DE US, 19713-3430 TEL: 302-733-8099 FAX: 302 355 3973 Class: B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: NO DESIGN AUTHORITY E.I. DU PONT DE NEMOURS & CO., 0000108482 8482 DU PONT ROAD, BLDG. 158 WASHINGTON, WV US, 26181 TEL: 304 863 4908 FAX: 304 863 2779 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM E.J. DAVIS, 0000106961 10 DODGE AVE. NORTH HAVEN, CT US, 06473-1124 TEL: 203-239-5391-329 FAX: 203-234-7724 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM #163 - limited to product no TA-301 E.V. ROBERTS, 0000102421 18027 BISHOP AVE. CARSON, CA US, 90746-4019 TEL: 800 374 3872 FAX: 310 202 7247 Class: C MANUFACTURER EA PATTEN COMPANY, 0000134800 303 WETHERELL STREET MANCHESTER, CT US, 06040 Class: C MANUFACTURER Page 269 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 860-649-2851 FAX: 999 999 9999 EADS SOGERMA, 0000101575 Z.I. DE L'ARNESAL -BPAOG ROCHEFORT, 17 FR, 17303 TEL: 5 46 82 82 82 FAX: 5 46 82 04 66 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION EARLE M. JORGENSEN CO., 0000100929 1800 N. UNIVERSAL AVE. KANSAS CITY, MO US, 64120 TEL: 800 821 2500 FAX: (816) 241-1020 Class: D DISTRIBUTOR EASTERN AERO MARINE INC., 5502 N. W. 37TH AVE. MIAMI, FL US, 33142-2718 Class: Systems with Limitations: C MANUFACTURER 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval RX3R831L & EASA dual approval EASA.145.4400. 0000102701 Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: touch-up only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: touch-up only BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: only on metallic parts BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual installation only BAPS 151-047 INSTALLATION OF TITANIUM LOCKBOLT IN METALS Limitation: Pull type only BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Use of pre-moulded seal caps in case of fastener sealing BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Use of prep-pen only BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Liquid nitrogen only BAPS 176-019 EDDY CURRENT INSPECTION Limitation: Occasional spot checks after repairs for the detection of: - Surface cracks (minimum 0.2mm deep.) Bolthole cracks (minimum 0,2mm deep and minimum 2 mm BAPS 188-02 COLD WORKING OF HOLES Limitation: Type I only Page 270 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 305 631 4278- FAX: 305 637 8632 EASTMAN CHEMICAL COMPANY, 0000106562 PARK & BRUNSWICK AVE. LINDEN, NJ US, 07036 TEL: 908 474 5000 FAX: 908 474 2866 Class: C MANUFACTURER EASYLIFT OF NORTH AMERICA INC., 0000108175 50 WEST DR. MELBOURNE, FL US, 32904-1074 TEL: 321 253 1999-203 FAX: 321 253 5546 Class: D DISTRIBUTOR Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Bandbach Easylift Germany product only EATON AEROQUIP INC., 0000103672 90 CLARY CONNECTOR EASTANOLLEE, GA US, 30538 TEL: 706 779 3351 FAX: 999 999 9999 Class: A SUBCONTRACTORS Specification Controlled: PSPEC 236 FABRICATION OF STEELS PSPEC 300 PENETRANT FLAW DETECTION PSPEC 416 PASSIVATION OF AUSTENITC, MARTENSITIC AND PH STEELS Specification Controlled with Limitations: PSPEC 436 HEAT TREATMENT OF HEAT RESISTING ALLOYS Limitation: Limited to anneal and stress relieving only. EATON AEROQUIP INC., 0000100062 300 SOUTH EAST AVE. JACKSON, MI US, 49203-1972 TEL: 517 789 4113 FAX: 517 789 2769 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER EATON AEROSPACE - AEROQUIP, 0000100064 BROAD GROUND ROAD LAKESIDE REDDITCH, WC GB, B98 8YS TEL: 1 527 517 555 FAX: 1 527 517 556 Class: A SUBCONTRACTORS EATON AEROSPACE LLC, 4690 COLORADO BLVD. LOS ANGELES, CA US, 90039-1106 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval FH3R501L & EASA dual approval EASA.145.4998. 0000101030 Specification Controlled: PPS 06.13 INSTLLATION FO PERMASWAGE FITTINGS Page 271 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 818-409-1567 FAX: 818 241 7551 EATON AEROSPACE LTD. - UK DUCTING, 0000128136 BROAD GROUND ROAD REDDITCH, WC GB, B98 8YS TEL: 1 527 505 392 FAX: 1 527 517 556 Class: A SUBCONTRACTORS EATON CORP., 0000101137 11642 OLD BALTIMORE PIKE BELTSVILLE, MD US, 20705-1294 TEL: 301 902 3450 FAX: 301 902 3602 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval XEPR787K& EASA dual approval EASA.145.5437. Specification Controlled: LES 1004 PENETRANT INSPECTION LES 1323 PASSIVATION OF CORROSION RESISTANT STEEL LES 1371 WELDING, FUSION - TITANIUM EATON CORP., 0000102734 15 DURANT AVE. BETHEL, CT US, 06801-1901 TEL: 203-796-6012 FAX: 203 796 6313 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval E1TR150N & EASA dual approval EASA 145.4401. EATON CORPORATION, 0000100862 24 GLENOLDEN AVE. E. GLENOLDEN, PA US, 19036-2107 TEL: 610 522 4934 FAX: 610 522 4900 Class: B EQUIPMENT SUPPLIERS EATON CORPORATION, 0000103483 5353 HIGHLAND DR. JACKSON, MS US, 39206-3449 TEL: 601-987-3427 FAX: 601 987 4717 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval EF4R152M & EASA dual approval EASA.145.4999. EATON CORPORATION, 0000101034 3675 PATTERSON AVE. S. E. GRAND RAPIDS, MI US, 49512-4022 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval VK6R687N & EASA dual approval EASA.145.5037. Page 272 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 616 831 8386- FAX: 616 949 2861 EATON CORPORATION, 0000100921 90 CLARY CONNECTOR EASTANOLLEE, GA US, 30538 TEL: 517 789-4113 FAX: 517 789 2769 Class: C MANUFACTURER EATON INDUSTRIAL CORPORATION, 0000114262 23555 EUCLID AVE. CLEVELAND, OH US, 44117-1795 TEL: 216 692 6000 FAX: 216 692 6029 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval A6GR410J & EASA dual approval EASA.145.4167. EATON INDUSTRIAL CORPORATION, 0000117686 9650 JERONIMO ROAD IRVINE, CA US, 92618-2024 TEL: 949 452 9943 FAX: 949 452 2878 Class: C MANUFACTURER EATON INDUSTRIES S. DE R.L. DE C.V., AV. SANTA ROSALIA 9707 TIJUANA, BC MX, 22572 TEL: 610 522-4951 FAX: 664 978 1673 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER 0000121294 Specification Controlled: BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-5D LIGHTNING STRIKE EVALUATION CAPTIVE LABORATORY PSPEC 205 THE BENDING AND FLARING OF PIPES AND DUCTS PSPEC 300 PENETRANT FLAW DETECTION PSPEC 305 RADIOGRAPHIC EXAMINATION PSPEC 501 MANUAL ARGON ARC WELDING PSPEC 504 RESISTANCE SPOT AND SEAM WELDING OF AUSTENITIC CORROSION RESISTANT STEELS AND NICKEL BASED SUPER ALL PSPEC 507 MANUAL ARGON ARC WELDING OF TITANIUM AND TITANIUM ALLOYS Specification Controlled with Limitations: Page 273 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PSPEC 436 HEAT TREATMENT OF HEAT RESISTING ALLOYS Limitation: Stress relief only PSPEC 440 HEAT TREATMENT OF CORROSION RESISTANT STEELS Limitation: Stress relief only EATON LIMITED, 0000108605 PATHFIELDS INDUSTRIAL ESTATE SOUTH MOLTON, DV GB, EX36 3DW TEL: 1 329 853811 FAX: 44 0 1329 853442 Class: C MANUFACTURER EATON LIMITED, 0000108993 ABBEY PARK SOUTHAMPTON ROAD TITCHFIELD FAREHAM, HA GB, PO14 4QA TEL: (0) 1329 853017 FAX: 1329 853796 Class: Specification Controlled: A SUBCONTRACTORS PSPEC 205 THE BENDING AND FLARING OF PIPES AND DUCTS E MAINTENANCE ORGANIZATION PSPEC 300 PENETRANT FLAW DETECTION PSPEC 504 RESISTANCE SPOT AND SEAM WELDING OF AUSTENITIC CORROSION RESISTANT STEELS AND NICKEL BASED SUPER ALL PSPEC 801 MANUAL INSTALLATION AND REMOVAL OF SOLID RIVETS Specification Controlled with Limitations: PSPEC 501 MANUAL ARGON ARC WELDING EBERHARD MFG. CO., 0000104919 21944 DRAKE ROAD STRONGSVILLE, OH US, 44149-6609 TEL: 440 238 9720 FAX: 440 572 2732 Class: C MANUFACTURER EBMPAPST, 0000124525 100 HYDE ROAD FARMINGTON, CT US, 06034 TEL: 860-674-1515 FAX: 860-674-8536 Class: C MANUFACTURER ECE, 0000107836 15 A 19 RUE D'ANTONY RUNGIS, 94 FR, 94152 TEL: 1 5606 1131 FAX: 1 5606 1202 Class: B EQUIPMENT SUPPLIERS ECI, 0000114380 53 MAINLINE DR. Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to commercial fan product Page 274 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval WESTFIELD, MA US, 01085-3313 TEL: 412 562 7684 FAX: 413) 562-7749 ECK & ECK MACHINE CO. INC., 0000101311 4606 W. HARRY WICHITA, KS US, 67209-2738 TEL: 316 942 5924 FAX: 316 942 0809 Class: A SUBCONTRACTORS ECORE INTL., 0000108907 715 FOUNTAIN AVE. LANCASTER, PA US, 17601-4547 TEL: 717-824-8228 FAX: 717 295 3414 Class: C MANUFACTURER EDELMAN LEATHER, LLC, 0000111061 80 PICKETT DISTRICT ROAD NEW MILFORD, CT US, 06776-4450 TEL: 860 350 9600 FAX: 860 350 3231 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods EDMO DISTRIBUTORS INC., 0000119217 12830 E. MIRABEAU PKWY. SPOKANE, WA US, 99216-1464 TEL: 800-235-3300 FAX: 800-828-0623 Class: D DISTRIBUTOR EDN AVIATION INC, 0000114260 6720 VALJEAN AVE. VAN NUYS, CA US, 91406-5818 TEL: 818 988 8826-123 FAX: 818 904 6799 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval IEDR824K& EASA dual approval EASA.145.5056. EDO CORP., 0000100917 585 JOHNSON AVE. BOHEMIA, NY US, 11716-5024 TEL: 631 218 5580 FAX: 631 630 4244 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION EIRE COMPOSITES TEO, Class: 0000120612 Specification Controlled: Page 275 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address AN CHOILL RUA INDREABHAN, GW IE, 0 TEL: 00 353 91 505430 FAX: 00 353 91 505 Classification A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS PSPEC 615 ADVANCED COMPOSITES PSPEC 910 ETCH AND EPOXY PRIMING Specification Controlled with Limitations: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Limited to bullet fairing details only BAPS 260-03 POTTING OF HONEYCOMB SANDWICH PANELS Limitation: CLASS II ONLY BAPS 260-04 FABRICATION OF 355 DEGREE F CURE GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS Limitation: This process is limited to the manufacture of part numbers; Limitation: GS274 0001 015 Elevator Skin Upper LH Limitation: GS274 0001 016 Elevator Skin Upper RH Limitation: GS274 0002 011 Elevator Skin Lower LH Limitation: GS274 0002 012 Elevator Skin Lower RH Limitation: GS264 0001 9001 Rudder Skin LH Limitation: GS2640001 9002 Rudder Skin RH Limitation: GS272 0002 Rev G Elevator Spar LH Limitation: GS272 0002 Rev G Elevator Spar RH Limitation: GS262 0001 Rev A Rudder Spar Limitation: Less trim and NDT. EIRTRADE AVIATION IRELAND LTD, 0000136299 603A GREENOGUE BUSINESS PARK RATHCOOLE, DB IE, D24 HW25 TEL: 0035314016080 FAX: 514 855 5000 Class: D DISTRIBUTOR EJAY FILTRATION INC., 0000103072 3036 DURAHART ST. RIVERSIDE, CA US, 92507-3446 TEL: 951-683-0805 FAX: 951 683 0783 Class: B EQUIPMENT SUPPLIERS ELBIT SYSTEMS CYCLONE LTD., 0000123881 BAR-LEV INDUSTRIAL PARK, P.OB. 114 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, Page 276 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification KARMIEL, 04 IL, 20100 TEL: 49960710 FAX: 49558567 Scope of Approval STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS BAPS 260-04 FABRICATION OF 355 DEGREE F CURE GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS CAPTIVE LABORATORY ELDEC CORPORATION, 0000100680 16700 13TH AVE. W. LYNNWOOD, WA US, 98037-8503 TEL: 425 743 8578 FAX: 425 743 8394 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval AG4R049M & EASA dual approval EASA.145.5067. ELDEMA PRODUCTS, 0000125493 10145 VIA DE LA AMISTAD #5 SAN DIEGO, CA US, 92154-7242 TEL: 619 661 5113 FAX: 619 661 5112 Class: C MANUFACTURER ELDER ENGINEERING (HERTS) LTD., 0000130839 CITY PARK WATCHMEAD, HT GB, AL7 1LT TEL: 01707 375121 FAX: 01707 375121 Class: D DISTRIBUTOR ELECTRALLOY, 0000119678 175 MAIN ST. OIL CITY, PA US, 16301-1038 TEL: 800 458 7273 FAX: 814 677 1342 Class: C MANUFACTURER ELECTRO ADAPTER INC., Class: 0000108118 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to part nos. Limitation: Limitation: P/N CF03-GTS-2185 Limitation: P/N CF03-WTS-2185 Limitation: P/N DHP-15B Limitation: P/N DHO-10B Limitation: P/N DHO-11B Limitation: P/N CF03ATS2185 Limitation: P/N MS18236-1WT LAMP, NEON 8 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Learjet Programs ONLY Limitation: Limited to Stainless Steel AMS 5659 Page 277 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 20640 NORDHOFF ST. CHATSWORTH, CA US, 91311-6114 TEL: 818 998 1198 FAX: 818 709 5773 C MANUFACTURER ELECTRO ENTERPRISES INC., 0000101005 3601 INTERSTATES 35 N. OKLAHOMA CITY, OK US, 73111 TEL: 817-595-0559 FAX: 817 595 0676 Class: Systems with Limitations: C MANUFACTURER 0000 GENERAL LIMITATION / REMARKS D DISTRIBUTOR H COMMERCIAL OFF THE SHELF ELECTRO-MECH COMPONENTS INC., 0000123249 1826 FLORADALE AVE. SOUTH EL MONTE, CA US, 91733-3689 TEL: 626 442 7180-12 FAX: 626-350-8070 Class: C MANUFACTURER ELECTRO-TERM HOLLINGSWORTH, 0000133440 165 FRONT STREET D2 CHICOPEE, MA US, 01013 TEL: 1 80 638 8376 FAX: 514 855 5000 Class: C MANUFACTURER ELECTROFILM MFG. CO., 0000101867 25395 RYE CANYON ROAD VALENCIA, CA US, 91355-1205 TEL: 661 257 2242 FAX: 661 257 7738 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS ELECTROMECH TECHNOLOGIES, 0000100934 2600 S. CUSTER WICHITA, KS US, 67217-1324 TEL: 316 941 0419 FAX: 316 941 0473 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION ELECTRON BEAM PROCESSES LTD., 0000128453 UNIT 4 OCTIMUM, FORSYTH ROAD WOKING, SY GB, GU21 5SA TEL: 14 832 15400 FAX: 999 999 9999 Class: A SUBCONTRACTORS Specification Controlled: PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME Specification Controlled: BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-17 RADIOGRAPHIC INSPECTION PSPEC 305 RADIOGRAPHIC EXAMINATION Page 278 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification ELECTRONIC EXCELLENCE LTD., 0000118907 ELECTRONIC EXCELLENC LTD LURGAN, AM GB, BT66 6LN TEL: 02838 330800 FAX: 02838 331116 Class: D DISTRIBUTOR ELECTRONIC HARDWARE CORP., 0000106978 320 BROAD HOLLOW ROAD FARMINGDALE, NY US, 11735-4807 TEL: 800 752 1680 FAX: 631 752 1971 Class: C MANUFACTURER D DISTRIBUTOR ELECTRONIC HARDWARE LTD., 0000130004 13257 SATICOY ST. NORTH HOLLYWOOD, CA US, 91605 TEL: 818 982 6100 FAX: 818 764 1889 Class: C MANUFACTURER D DISTRIBUTOR ELECTROSPEC INC., 0000101582 24 E. CLINTON ST. DOVER, NJ US, 07801-3947 TEL: 800 631 9616 FAX: 973 361 0454 Class: D DISTRIBUTOR ELECTROSWITCH ELECTRONIC PRODUCTS, 0000106300 2010 YONKERS ROAD RALEIGH, NC US, 27604-2258 TEL: 919-833-0707-263 FAX: 919 833 8016 Class: C MANUFACTURER ELEMENT MATERIALS TECHNOLOGY, 0000124351 3100 N. HEMLOCK CIR. BROKEN ARROW, OK US, 74012-1115 TEL: 800 982 8378 FAX: 918 258 1154 Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS Page 279 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-5A CORROSION TESTING INDEPENDANT LABORATORY ELEMENT MATERIALS TECHNOLOGY, 0000107385 9301 INNOVATION DR., SUITE 175 DALEVILLE, IN US, 47334 TEL: 765 378 4102 FAX: 765 378 4108 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-5A CORROSION TESTING INDEPENDANT LABORATORY ELEMENT RANCHO DOMINQUEZ, 0000104571 18100 S. WILMINGTON AVE. RANCHO DOMINQUEZ, CA US, 90220-5909 TEL: 310 632 8500 FAX: 310 632 4700 Class: A SUBCONTRACTORS Specification Controlled: BAPS 176-04 MAGNETIC PARTICLE INSPECTION MPS 176-07 ULTRASONIC INSPECTION OF WROUGHT METALS PPS 20.04 ULTRASONIC INSPECTION PSPEC 300 PENETRANT FLAW DETECTION PSPEC 305 RADIOGRAPHIC EXAMINATION ELIMETAL INC., 1515 PITFIELD ST-LAURENT, QC Class: A SUBCONTRACTORS Specification Controlled with Limitations: PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN 0000106980 Page 280 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification CA, H4S 1G3 TEL: 514 956 7400-237 FAX: 514 956 8110 Scope of Approval Limitation: Interference fit installation of bushings only ELITE AEROSPACE INC, 0000137757 3151 EXECUTIVE WAY MARAMAR, FL US, 33025 TEL: 954-430-3005 FAX: 514-855-5000 Class: E MAINTENANCE ORGANIZATION ELLSWORTH ADHESIVES CANADA CORP., 0000106195 560 ARVIN AVE., SUITE 5 STONEY CREEK, ON CA, L8E 5P1 TEL: 888 458 0554-227 FAX: 877 331 6604 Class: D DISTRIBUTOR ELSO LTEE., 0000121200 2519 GUENETTE ST-LAURENT, QC CA, H4R 2E9 TEL: 514 338 1088 FAX: 514 338 1688 Class: D DISTRIBUTOR ELTA S.A., 0000125790 14 PLACE MARCEL-DASSAULT BLAGNAC CEDEX, 31 FR, 31702 TEL: 5 34 36 10 00 FAX: 5 61 54 78 25 Class: B EQUIPMENT SUPPLIERS EM CORP., 0000106981 6940 FARMDALE AVE. N. HOLLYWOOD, CA US, 91605-6210 TEL: 818 983 1952 FAX: 818 503 0998 Class: C MANUFACTURER EMBALLAGES CRE-O-PACK INTL INC., 0000109200 8420 CHEMIN DARNLEY MONTREAL, QC CA, H4T 1M4 TEL: 514 343 9666-243 FAX: 514 343 8385 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS EMBALLAGES RICHARDS, 1939 ONESIME-GAGNON Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS 0000108576 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 171 Page 281 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification LACHINE, QC CA, H8T 3M5 TEL: 514 422 8690 FAX: 514 422 0876 Learjet Approved Suppliers Scope of Approval Limitation: Limited to Commercial off the shelf goods EMC AEROSPACE INC., 0000126539 570 N.E. 185TH ST. NORTH MIAMI BEACH, FL US, 33179-0000 TEL: 954 316 6015 FAX: 954 316 6421 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Limitation: FAA Repair Station approval E2PR084Y & EASA approval EASA.145.5274 EMCO WHEATON, 0000108690 2390 SOUTH SERVICE ROAD OAKVILLE, ON CA, L6L 5M9 TEL: 905-829-8619 FAX: 905-829-8620 Class: C MANUFACTURER EMHART TECHNOLOGIES, INC., 0000108832 1915 PEMBROKE ROAD HOPKINSVILLE, KY US, 42240-4490 TEL: 270 886 3951 FAX: 270 885 2666 Class: C MANUFACTURER EMHART TEKNOLOGIES LLC, 0000106983 SHELTER ROCK LANE DANBURY, CT US, 06810 TEL: 203 790 5000 FAX: 203 830 3292 Class: C MANUFACTURER EMPIRE BUFF CO. LTD., 0000128290 1485 ST-ELZEAR O. LAVAL, QC CA, H7L 3N6 TEL: 450 668 1400 FAX: 450 668 1114 Class: D DISTRIBUTOR EMS TECHNOLOGIES CANADA LTD., 0000102092 400 MAPLE GROVE ROAD OTTAWA, ON CA, K2V 1B8 TEL: 613-595-7756 FAX: 613-591-0205 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: – Equipment supplier for parts under EMS Technologies design Limitation: – Service Provider for the maintenance activities on components under EMS Technologies Limitation: design as defined on TCCA AMO certifcate number Page 282 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 325-92 and EASA certificate number Limitation: EASA.145.7155 ENERGIE VALERO INC., 0000136533 11370 NOTRE-DAME EST., NO. 412 MONTREAL-EST, QC CA, H1B 2W6 TEL: 514-645-8111 FAX: 999-999-9999 Class: C MANUFACTURER ENERSYS ENERGY PRODUCTS INC., 0000114337 617 N. RIDGEVIEW DR. WARRENSBURG, MO US, 64093-9301 TEL: 660 429 2165 FAX: 660 429 6397 Class: C MANUFACTURER ENFLITE INC., 0000110514 105 COOPERATIVE WAY GEORGETOWN, TX US, 78626-8200 TEL: (512) 864-8175 FAX: 512 868 3320 Class: B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to interior completion components for the Global Express. ENFLO CANADA LTD., 0000106987 73 INDUSTRIAL ROAD GRAND FALLS, NB CA, E3Y 3V1 TEL: 506 473 3711 FAX: 506 473 2307 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM #174 ENFLO LLC, 0000103888 315 LAKE AVE. BRISTOL, CT US, 06010-7326 TEL: 860 589 0014 FAX: (860) 589-7179 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM ENGINEERING MATERIAL RESEARCH, 0000106988 35 CARL HALL ROAD, UNIT 3 DOWNSVIEW, ON CA, M3K 2B6 TEL: 416 638 3453 FAX: 999 999 9999 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Bombardier internal use only ( Material and Process Eng. for R&D) Specification Controlled: CAPTIVE LABORATORY Page 283 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval Specification Controlled with Limitations: BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING ENGLISH BRAIDS LTD, 0000134881 SPRING LANE MALVERN, WC GB, WR14 1AL TEL: 44 1684 892 222 FAX: 44 1684 892 11 Class: C MANUFACTURER ENGLISH PLASTICS, 0000106989 5905 COOPERS AVE. MISSISSAUGA, ON CA, L4Z 1R9 TEL: 905 568 4140 FAX: 905 568 4350 Class: A SUBCONTRACTORS ENSAMBLADORES ELECTRONICOS DE MEXIC, SIERRA SAN AGUSTIN # 2498 FRACC. MEXICALI, BC MX, 21185 TEL: 714-929-4647 FAX: 714 929 4601 Specification Controlled: PPS 10.08 FORMING THERMOPLASTIC SHEET Specification Controlled with Limitations: PPS 10.35 FABRICATION OF 250 F CURE, EPOXY RESIN PRE-IMPREGNATED, FIBRE REINFORCED COMPOSITE PARTS Limitation: Waiting Nadcap Certification . 0000101161 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station Approval ED7Y210Y & EASA dual approval EASA.145.0328 ENSIGNER GMBH, 0000131854 RUDOLF DIESEL STRASSE 8 NUFRINGEN, 12 DE, 71154 TEL: 49 0 7032819683 FAX: 49 0 703281968 Class: C MANUFACTURER ENSINGER INC., 0000106990 365 MEADOWLANDS BLVD. WASHINGTON, PA US, 15301-8904 TEL: 800-243-3221 FAX: 724-746-9209 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM #176 ENVIRO TECH INTL. INC., 2525 W. LEMOYNE MELROSE PARK, IL Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: ASTM D6368 0000120990 Page 284 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 60160 TEL: 708 343 6641 FAX: 708 343 4633 EPMAR CORPORATION, 0000131557 13210 E. BARTON CIRCLE SANTA FE SPRINGS, CA US, 90605 TEL: 5629468781 FAX: 5629449958 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM no . 543 ERVIN, 0000106991 681 BUTLER ROAD E. BUTLER, PA US, 16002-9127 TEL: 517-265-6118 FAX: 734 663 0136 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM ERVIN AMASTEEL, 0000135211 915 TABOR STREET ADRIAN, MI US, 49221 TEL: 517-265-6118 FAX: 517-265-5636 Class: C MANUFACTURER ES BETA, INC. -BETATRONIX, 0000137449 110 NICON COURT HAUPPAUGE, NY US, 11788 TEL: 631-582-6740 FAX: 631-582-0132 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER ESAB GROUP ( UK ) LTD., 0000129772 HANOVER HOUSE, QUEENSGATE WALTHAM CROSS, HT GB, EN8 7TF TEL: 0 1992 768515 FAX: 0 1992 715803 Class: D DISTRIBUTOR ESL ENGINEERS (BASILDON) LIMITED, 0000131522 WOLLASTON WAY, BURNT MILLS BASILDON, ES GB, SS13 1DJ TEL: 01268 727777 FAX: 01268 727777 Class: A SUBCONTRACTORS ESOTERIC, 0000130106 26499 RANCHO PKWY. S. Class: H COMMERCIAL OFF THE SHELF Page 285 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval LAKE FOREST, CA US, 92630 TEL: 949 540 2601 FAX: 999 999 9999 ESPA (FLEURY LES AUBRAIS), 0000109738 22 RUE DE CUREMBOURG FLEURY-LES-AUBRAIS, 45 FR, 45401 TEL: 2 38 86 22 87 FAX: 2 388 411 59 Class: C MANUFACTURER ESSENTRA COMPONENTS, 0000137358 3123 STATION ROAD ERIE, PA US, 16510 TEL: 905-825-0134 FAX: 905-825-2919 Class: C MANUFACTURER ESSEX INDUSTRIES, 0000102000 4150 CARR LANE ST-LOUIS, MO US, 63119 TEL: 314 351 6116-401 FAX: 314 351 7181 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval P9BR720N & EASA dual approval EASA.145.5184. ESSEX INDUSTRIES INC., 0000103640 6 SUNNEN DR. ST-LOUIS, MO US, 63143-3800 TEL: 314-338-8220 FAX: 999 999 9999 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION ETA GLOBAL INC., 0000102204 5500 W. OAK ST. PALESTINE, TX US, 75802-0259 TEL: 817 873 0213 FAX: 817 488 7713 Class: D DISTRIBUTOR EURAMTEC CORP., 0000108598 29650 GRAND RIVER AVE. FARMINGTON HILLS, MI US, 48336-5622 TEL: 248 473 8660 FAX: 248 473 8662 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: PART NOS S-801 AND S-193 ONLY. EURO-COMPOSITES, Class: 0000106996 Systems with Limitations: Page 286 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address ZONE INDUSTRIELLE ECHTERNACH, LU LU, 6401 TEL: 729 4631 FAX: 729 4600 Classification C MANUFACTURER Scope of Approval 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Specification Controlled: PPS 10.24 PREPARATION OF HONEYCOMB CORES FOR LAY-UP IN SANDWICH PANEL ASSEMBLIES Specification Controlled with Limitations: BAPS 260-010 MACHINING, FORMING AND PREPARATION OF NON-METALLIC HONEYCOMB CORE FOR LAY-UP IN SANDWICH COMPONENTS Limitation: Excluding Butt Slicing of Honeycomb Core & Stabilizing Honeycomb Core EURO-COMPOSITES CORP., 0000108245 13213 AIRPARK DR. ELKWOOD, VA US, 22718-1703 TEL: 540 727 8507 FAX: 540 829 6611 Class: A SUBCONTRACTORS C MANUFACTURER EVERETT CHARLES TECHNOLOGIES, 487 JEFFERSON BLVD. Class: C MANUFACTURER 0000101787 Specification Controlled with Limitations: BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAPS 260-010 MACHINING, FORMING AND PREPARATION OF NON-METALLIC HONEYCOMB CORE FOR LAY-UP IN SANDWICH COMPONENTS Limitation: Excluding: Butt Splicing & Stabilization of Honeycomb Core BAPS 260-03 POTTING OF HONEYCOMB SANDWICH PANELS Limitation: Limited to: Pre-potting of honeycomb core panels Limitation: ONLY, specific to: Limitation: 1. BAMS 260-003 Class III and IV Limitation: 2. Potting of casting resin BAMS 532-002 Type IV PPS 10.24 PREPARATION OF HONEYCOMB CORES FOR LAY-UP IN SANDWICH PANEL ASSEMBLIES Limitation: Limited to core machining only. Page 287 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval WARWICK, RI US, 02886-1321 TEL: 401 739 7310 FAX: 401 732 4937 EVERLUBE PRODUCTS, 0000105279 100 COOPER CIR. PEACHTREE CITY, GA US, 30269-3025 TEL: 800-428-7802 FAX: 770-261-4805 Class: C MANUFACTURER EVONIK FOAMS INC. ROHACELL AMERICAS, 0000134140 4375 INDUSTRIAL ROAD THEODORE, AL US, 36582 TEL: 1 251 443 4103 FAX: 1 251 443 3606 Class: A SUBCONTRACTORS C MANUFACTURER EVONIK ROHM GMBH, 0000118002 KIRSCHENALLEE DARMSTADT, 08 DE, 64293 TEL: 6151 1801 FAX: 6151 1802 Class: C MANUFACTURER EXACTA AEROSPACE INC., 0000101163 4200 W. HARRY WICHITA, KS US, 67209-2730 TEL: 316 941 4200-173 FAX: 316 941 4204 Class: A SUBCONTRACTORS Specification Controlled: LES 1033 ELECTRICAL BONDING EXACTATHERM LTD., 0000107749 2381 ANSON DR. MISSISSAUGA, ON CA, L5S 1G1 TEL: 905-677-7822 FAX: 905-677-7826 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-14 HEAT TREATMENT OF STEELS BAPS 168-15 STRESS RELIEF OF METALS BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS PPS 20.08 HARDNESS TESTING PPS 30.02 SUB-ZERO TREATMENT OF STEEL PARTS PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS PPS 30.06 PRECIPITATION HARDENABLE (PH) STAINLESS STEEL PPS 30.08 STEEL HEAT TREATMENT - MARTENSITIC STAINLESS STEEL PPS 30.10 STEEL HEAT TREATMENT - AUSTENITIC (STRAIN HARDENABLE) STAINLESS STEEL PPS 30.12 STEEL HEAT TREATMENT - GENERAL PPS 30.14 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS Page 288 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PPS 30.17 STEEL CASE HARDENING (ION NITRIDING) Specification Controlled with Limitations: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: LIMITED TO HARDNESS TESTING BAPS 168-20 HEAT TREATMENT OF COPPER AND COPPER ALLOYS Limitation: LIMITED TO FURNACES T2 AND T3 PPS 30.07 HEAT TREATMENT OF BERYLLIUM COPPER ALLOYS Limitation: AGE HARDENING ONLY EXCEL TOOL & MFG. INC., 0000101671 14344 W. 96TH TERRACE LENEXA, KS US, 66215-4708 TEL: 913 894 6415 FAX: 913 492 1219 Class: A SUBCONTRACTORS EXCELSIOR INC., 0000108815 720 CHESTNUT ST. ROCKFORD, IL US, 61102-2240 TEL: 815 987 FAX: 815 962 5466 Class: C MANUFACTURER EXECAIRE A DIVISION OF I.M.P. GROUP, 10225 RYAN AVE. DORVAL, QC CA, H9P 1A2 TEL: 514 636 8484 FAX: 514 420 2939 0000102146 Class: Systems with Limitations: A SUBCONTRACTORS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Canadian AMO approval 1-68 & EASA dual approval EASA.145.7125 Limitation: Canadian AMO approval 1-68 & EASA dual approval EASA.145.7125 Limitation: Limitation: NDT Services to BA facility Limitation: - High frequency eddy current inspection per NDE ET-15. Limitation: - Fluorescence Penetrant Inspection per NDE PT-7. Limitation: - MPI per BAPS 176-004 using portable yoke with 2 to 4-inch spacing. Specification Controlled with Limitations: BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Limitation: Limitation: To use on BA facilities ONLY Limitation: - Fluorescence Penetrant Inspection per NDE Page 289 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PT-7. BAPS 176-04 Limitation: Limitation: Limitation: spacing. MAGNETIC PARTICLE INSPECTION To use on BA facilities ONLY To use on BA facilities ONLY Limitation: using portable yoke with 2 to 4-inch EXECUTIVE INSTRUMENTS INC., 0000103230 4141 LINDBERG DR. ADDISON, TX US, 75001-4361 TEL: 972 239 0231 FAX: 972 991 3271 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval XN1R618K & EASA dual approval EASA.145.4436. EXEL COMPOSITES UK, 0000117697 FAIROAK LANE RUNCORN, HL GB, WA7 3DU TEL: 1928 701515 FAX: 1928 713572 Class: C MANUFACTURER EXOTIC METALS FORMING CO. LLC, 0000129287 5411 S. 226TH ST. KENT, WA US, 98032 TEL: 253 395 3710 FAX: 999 999 9999 Class: E MAINTENANCE ORGANIZATION EXOVA, 0000126797 3 AVENUE ANDRE MARIE AMPERE, ZAC DU PERG COLOMIERS, 31 FR, 31770 TEL: 05 61 78 55 44 FAX: 999 999 9999 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-5A CORROSION TESTING INDEPENDANT LABORATORY Page 290 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval EXOVA, 0000126795 NO. 1 FESTIVAL UNITS BRIDGWATER, SO GB, TA6 6LS TEL: 01278 456888 FAX: 01278 453123 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) INDEPENDANT LABORATORY EXOVA (UK) LIMITED-DUDLEY, 0000108579 182 HALESOWENS ROAD, NETHERTON DUDLEY, WM GB, DY2 9PL TEL: 1384 455751 FAX: 1384 455214 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS Page 291 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-5A CORROSION TESTING INDEPENDANT LABORATORY EXOVA (UK) LIMITED-LANCASTER, 0000108529 CROSSLANDS HOUSE WHITE CROSS S. ROA LANCASTER, LA GB, LA1 4XQ TEL: 1 524 841070 FAX: 441 524 62983 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2E MECHANICAL TESTING: PLASTICS, RUBBERS STATIC AND ELASTIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-5A CORROSION TESTING INDEPENDANT LABORATORY EXOVA AB, 0000126796 GELBGJUTAREG & NOBYMALMSV LINKOPING, 003 SE, 581 13 TEL: 13 169000 FAX: 13 169020 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** Page 292 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2E MECHANICAL TESTING: PLASTICS, RUBBERS STATIC AND ELASTIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-4C TESTING OF THERMAL PROPERTIES (EXPANSIONS, TMA, ETC.) BAERD-GEN-018-4E TESTING OF WEAR AND ABRASION PROPERTIES BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5D LIGHTNING STRIKE EVALUATION BAERD-GEN-018-5E EVALUATION OF PAINTS BAERD-GEN-018-5F FUELS, LUBRICANTS, SOLVENTS (FORMERLY IE) BAERD-GEN-018-5G PLASTICS, RUBBERS (FORMERLY 1D) INDEPENDANT LABORATORY EXOVA CANADA INC., 0000107263 2395 SPEAKMAN DR. MISSISSAUGA, ON CA, L5K 1B3 TEL: 905 822 4111-325 FAX: 905 823 1446 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR Page 293 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2E MECHANICAL TESTING: PLASTICS, RUBBERS STATIC AND ELASTIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-4C TESTING OF THERMAL PROPERTIES (EXPANSIONS, TMA, ETC.) BAERD-GEN-018-4D TESTING OF FLAMMABILITY PROPERTIES BAERD-GEN-018-5C FAA HEAT RELEASE/SMOKE TESTING BAERD-GEN-018-5G PLASTICS, RUBBERS (FORMERLY 1D) INDEPENDANT LABORATORY EXOVA CANADA INC., 0000107448 121 HYMUS POINTE-CLAIRE, QC CA, H9R 1E6 TEL: 514 697 3273-277 FAX: 514 697 2090 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS INDEPENDANT LABORATORY Specification Controlled with Limitations: Page 294 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS EXOVA INC., 0000106658 10005 FREEMAN AVE. SANTA FE SPRINGS, CA US, 90670-3405 TEL: 562 946 1721 FAX: 562 944 8389 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-5A CORROSION TESTING INDEPENDANT LABORATORY EXOVA S.R.O., 0000126798 PODNIKATELSKA 39 PIZEN, 03 CZ, 301 00 TEL: 420378 023888 FAX: 420378 023880 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS Page 295 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-5A CORROSION TESTING INDEPENDANT LABORATORY EXPANDED RUBBER & 19200 LAUREL PARK RANCHO DOMINGUEZ, US, 90220-6008 TEL: 310-639-0385 PLASTICS CORP, ROAD CA 0000101001 Class: A SUBCONTRACTORS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to ''Bombardier internal use ONLY'' FAX: 310-639-1081 EXPERCHEM LABS. INC., 0000108888 1111 FLINT ROAD, UNIT 40-41 DOWNSVIEW, ON CA, M3J 3C7 TEL: 416 665 2134 FAX: 416 665 9251 Specification Controlled: CAPTIVE LABORATORY Specification Controlled with Limitations: BAERD-GEN-018-5F FUELS, LUBRICANTS, SOLVENTS (FORMERLY IE) Limitation: The approval is limited to lubricants analysis for support to BAM&PE internal laboratory only. EXPRESS ENGINEERING (AEROSPACE), 0000136656 1 ELLERBECK WAY, STOKESLEY BUSINESS PARK MIDDLESBOROUGH, YN GB, TS9 5JZ TEL: 01642 718738 FAX: 514 855 5000 Class: A SUBCONTRACTORS EXPRESS ENGINEERING (THOMPSON) LTD., KINGSWAY N. GATESHEAD, TY GB, NE11 0EG TEL: 0191 4872021 FAX: 0191 4873172 Class: A SUBCONTRACTORS EXTANT AEROSPACE, 0000133433 1615 WEST NASA BLVD MELBOURNE, FL US, 32901-2613 0000124043 Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limited for Vibro-Engraving of Part Numbers C01677751-001/002. Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION Page 296 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 321 254 1500 FAX: 321 259 4122 F.LIST GMBH, 0000122430 LIST STRASSE 1 EDLITZ-THOMASBERG, W AT, 2842 TEL: 2644 6001 0 FAX: 2644 6001 24 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER FABER ENTERPRISES INC., 0000107000 6606 VARIEL AVE. CANOGA PARK, CA US, 91303-2872 TEL: 310-323-6200-... FAX: 818 712 0512 Class: C MANUFACTURER FABRI COTE, 724 E. 60 TH LOS ANGELES, US, 90001 TEL: 323 232 Class: A SUBCONTRACTORS 0000108160 ST. CA 2147 FAX: 323 233 7048 FABRICAIRE, 0000124575 530 DES ERABLES VALLEYFIELD, QC CA, J6T 6J4 TEL: 450 377 6669 FAX: 450 377 0666 Class: A SUBCONTRACTORS Specification Controlled: BAPS 710-001 INTERIOR AIRCRAFT, VARNISH APPLICATION FABRICAIRE INC., 0000118098 3365 GRIFFITH ST. ST-LAURENT, QC CA, H4T 1W5 TEL: 514 341 9666 FAX: 514 341 6047 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: BAPS 710-001 INTERIOR AIRCRAFT, VARNISH APPLICATION Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Aircraft Interior manufacture and/or assembly only. BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Aircraft Interior manufacture and/or assembly only. BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Page 297 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Limitation: Type 2 Manual Application – Alodine 1132 Touch and Prep Pen FABRICAIRE INC., 0000134889 6650 RUE ABRAMS ST-LAURENT, QC CA, H4S 1Y1 TEL: 514-341-9666 FAX: 514-341-6-047 Class: A SUBCONTRACTORS FABRIFORM PLASTICS INC., 0000108657 3300 AIRPORT WAY S. SEATTLE, WA US, 98134-2118 TEL: 206 587 5303 FAX: 206 587 3764 Class: B EQUIPMENT SUPPLIERS FACC OPERATIONS GMBH, 0000114473 KAMMER 32 ORT IM INNKREIS, OÖ AT, 4974 TEL: 43 59 616 1160 FAX: NA Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS Specification Controlled: BAPS 710-001 INTERIOR AIRCRAFT, VARNISH APPLICATION Specification Controlled: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES BAPS 188-08 MACHINING OF COMPOSITES BAPS 260-010 MACHINING, FORMING AND PREPARATION OF NON-METALLIC HONEYCOMB CORE FOR LAY-UP IN SANDWICH COMPONENTS BAPS 260-03 POTTING OF HONEYCOMB SANDWICH PANELS Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: limited to composite only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Limited to composite only BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to manual riveting only. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR Page 298 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval ALUMINIUM ALLOYS Limitation: Limited for Type 2 (Alodine 1132 Touch and Prep Pen) Only BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES Limitation: Limited to straight through holes and countersinks in PCCN 2 & 3 detail parts only. BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... Limitation: Limited to Autoclave W2-AC02 FACC OPERATIONS GMBH, 0000107755 FISCHERSTRASSE 9 RIED, OÖ AT, 4910 TEL: 011 43 59 6160 FAX: 59 616 81600 Class: F STRUCTURAL SUPPLIER Systems with Limitations: 2101 MRB APPROVAL - MINOR ONLY Limitation: CL-300 Specification Controlled: BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2E MECHANICAL TESTING: PLASTICS, RUBBERS STATIC AND ELASTIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 176-17 RADIOGRAPHIC INSPECTION CAPTIVE LABORATORY MPS 176-07 ULTRASONIC INSPECTION OF WROUGHT METALS PPS 10.21 CERTIFICATION OF AUTOCLAVES PPS 10.35 FABRICATION OF 250 F CURE, EPOXY RESIN PRE-IMPREGNATED, FIBRE REINFORCED COMPOSITE PARTS PPS 10.39 MACHINING OF FIBRE REINFORCED COMPOSITE PARTS PPS 10.40 REPAIRS TO PRE-IMPREGNATED LAMINATES AND SANDWICH PANELS PPS 10.51 CERTIFICATION OF OVENS PPS 10.52 CERTIFICATION OF PLATEN PRESSES Specification Controlled with Limitations: Page 299 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... Limitation: LIMITED TO AUTOCLAVE NO. 1 AND NO.6 FACC SOLUTIONS (CANADA) INC., 0000120941 4149 Autoroute 440, O LAVAL, QC CA, H7P 4W6 TEL: 450 473 7600-222 FAX: 450 473 6353 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING BAPS 145-004 INSTALLATION OF MECHANICALLY ATTACHED TERMINALS Specification Controlled with Limitations: BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 2 Manual Application – Alodine 1132 Touch and Prep Pen FAIN MODELS, 0000111072 3700 HWY. 121 BEDFORD, TX US, 76021-3102 TEL: 817 540 1000 FAX: 817 315 3350 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods FAIR-RITE PRODUCTS CORP., 0000103327 1 COMMERCIAL ROW WALLKILL, NY US, 12589 TEL: 845-895-2055-633 FAX: 845-895-2629 Class: C MANUFACTURER FAIRCHILD FASTENERS EUROPE, 0000107520 2 HILDESHEIM STEVE 3 BAVENSTEDT, 09 DE, 31135 TEL: 5121 76240 FAX: 5121 51150 Class: C MANUFACTURER FAIRCHILD FASTENERS EUROPE, 0000110153 INDUSTRIES BE 6 KELKHEIM, 08 DE, 65779 TEL: 6195 80 50 FAX: 6195 564 Class: C MANUFACTURER FAIRCHILD SEMICONDUCTOR, 82 RUNNING HILL ROAD SOUTH PORTLAND, ME Class: C MANUFACTURER 0000108596 Page 300 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval US, 04106-3218 TEL: 207 775 8106 FAX: 207 775 8788 FALCON AEROSPACE, 0000107910 3350 ENTERPRISE AVE., UNIT 180 WESTON, FL US, 33331-3518 TEL: 954 771 9338-72 FAX: 954 771 9193 FALCONMET ENGINEERING & LABORATORIE, 1111 FLINT ROAD, UNIT 14 DOWNSVIEW, ON CA, M3J 3C7 TEL: 416 661 3183 FAX: 416 661 3183 FALGAYRAS 5-7 ALLEE COLOMIERS FR, 31771 TEL: 5 61 S.A., 0000125791 CHARLES CROS CEDEX, 31 Class: D DISTRIBUTOR 0000119723 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION INDEPENDANT LABORATORY Class: B EQUIPMENT SUPPLIERS 86 21 91 FAX: 5 61 86 18 07 FARMERS COPPER LTD., 0000108698 9900 EMMETT F LOWRY EXPRESSWAY TEXAS CITY, TX US, 77591 TEL: 409 765 9903 FAX: 409 765 7115 Class: D DISTRIBUTOR FARO TECH, 0000108261 222 GALE LN KENNETT SQUARE, PA US, 19348-1734 TEL: 610 444 2300 FAX: 610 444 2323 Class: C MANUFACTURER Page 301 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification FASTENER DIMENSIONS INC., 0000102110 94-03 104TH ST. OZONE PARK, NY US, 11416-1723 TEL: 718 847 6321 FAX: 718 847 8414 Class: C MANUFACTURER D DISTRIBUTOR FASTENER INNOVATION TECHNOLOGY, 0000107002 19300 S. SUSANA ROAD RANCHO DOMINGUEZ, CA US, 90221 TEL: (310) 538-111... FAX: 888-200-8716 Class: C MANUFACTURER FASTENER SPECIALTY INC., 0000102767 2435 109TH ST. GRAND PRAIRIE, TX US, 75050-1113 TEL: 972 988 0064 FAX: 972 660 3153 Class: C MANUFACTURER FASTENER TECHNOLOGY, 0000107003 7415 FULTON AVE. N. HOLLYWOOD, CA US, 91605-4116 TEL: 330-864-2122 FAX: 330 864-5298 Class: C MANUFACTURER FATIGUE TECHNOLOGY INC., 0000104843 401 ANDOVER PARK E. SEATTLE, WA US, 98188-7605 TEL: 206-701-7235 FAX: 206 244 9886 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER FCT ELECTRONICS LP, 0000110871 187 COMMERCIAL BLVD. TORRINGTON, CT US, 06790-3098 TEL: 860 482 2800 FAX: 860 482 2872 Class: C MANUFACTURER FEDERAL MFG CORP., 9825 DE SOTO AVE. CHATSWORTH, CA US, 91311-4412 Class: C MANUFACTURER 0000107593 Learjet Approved Suppliers Scope of Approval Page 302 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 818 341 9825 FAX: 818 341 9913 FEDERAL SIGNAL CORP., 0000108761 2645 FEDERAL SIGNAL DR. UNIVERSITY PARK, IL US, 60484-3167 TEL: 708 534 3400 FAX: 708 534 4719 Class: C MANUFACTURER FEDERAL-MOGUL SYSTEMS, 0000103620 69 RUE HENRI-LAROCHE CREPY EN VALOIS, 60 FR, 60800 TEL: 3 44 94 48 53 FAX: 3 44 94 48 33 Class: C MANUFACTURER FEDERAL-MOGUL SYSTEMS PROTECTION, 0000125874 1277 JOE BATTLE BLVD. EL PASO, TX US, 79936-0966 TEL: 915 860 2300-... FAX: 915 860 1243 Class: C MANUFACTURER FELLFAB LTD., 0000107004 2343 BARTON ST. E. HAMILTON, ON CA, L8E 5V8 TEL: 905 560 9230-221 FAX: 905 560 9846 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS FENWAL SAFETY SYSTEMS, 0000101437 4200 AIRPORT DR. N.W., BLDG. B WILSON, NC US, 27896-8630 TEL: 252 246 7112 FAX: 252 246 7181 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER E MAINTENANCE ORGANIZATION FERONYL, 0000129657 BLVD. INDUSTRIEL 101 MOUSCRON, 03 BE, 7700 TEL: 056857530 FAX: 999 999 9999 Class: A SUBCONTRACTORS FESHER AVIATION COMPONENT, 0000134798 NO 88 CHUISHAN ROAD, DAGANG ZHENJIANG, 100 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval YZ4R692M & EASA dual approval EASA.145.4718. Specification Controlled: BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** Page 303 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address CN, 212132 TEL: 86 0511 80868502 FAX: 86 0511 80868 Classification Learjet Approved Suppliers Scope of Approval BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-4C TESTING OF THERMAL PROPERTIES (EXPANSIONS, TMA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS BAPS 188-08 MACHINING OF COMPOSITES BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... CAPTIVE LABORATORY Specification Controlled with Limitations: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION Limitation: BATS 5532 Coating Weight Determination Only BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: CP Oven 1, CP Oven 2, CP Oven 3 BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual riveting only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 2 only (manual application) BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 2 only (manual application) BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES Limitation: Drilling of detail parts only BAPS 260-010 MACHINING, FORMING AND PREPARATION OF NON-METALLIC HONEYCOMB CORE FOR LAY-UP IN SANDWICH Page 304 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval COMPONENTS Limitation: Class B and Class C parts only BAPS 260-03 POTTING OF HONEYCOMB SANDWICH PANELS Limitation: Class IV FIBEROPTICS TECHNOLOGY INC., 0000132170 1 QUASSETT ROAD, PO BOX 286 POMFRET, CT US, 06258 TEL: 860 928 0443 FAX: 860 928 7664 Class: H COMMERCIAL OFF THE SHELF FIBERTECNIC S.A.U., 0000127558 PORTAL DE GAMARRA NO. 40 VITORIA, 01 ES, 01013 TEL: 945 129200 FAX: 945 129240 Class: A SUBCONTRACTORS FIELD AVIATION CO. INC., 0000107752 4300 - 26 ST N.E., UNIT 125 CALGARY, AB CA, T1Y 7H7 TEL: 403 516 8200 FAX: 403 516 8336 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS Specification Controlled: BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS BAPS 188-08 MACHINING OF COMPOSITES Specification Controlled with Limitations: BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES Limitation: Limitation; drilling only one (1) composite component at the time Limitation: (no stacks) and drill exits shall be through a ply of fibreglass fabric Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Page 305 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PPS 01.02 PPS 21.20 PPS 21.21 PPS 25.08 PPS 25.14 ADHESIVE PPS 25.23 PPS 25.50 PPS 25.55 PPS 31.02 PPS 31.05 PPS 31.07 PPS 32.01 PPS 32.03 PPS 34.03 PPS 34.08 FORMING ALUMINUM ALLOYS MIXING AND HANDLING TWO PART SEALANTS GENERAL SEALING PRACTICES EC-1099 ADHESIVE GENERAL ELECTRIC PSA529/SRC-18 SILICONE BASE EC-1300 ADHESIVE RTV SILICONE ADHESIVES EC-1357N ADHESIVE CLEANING PROCESSES OF ALUMINUM SURFACE TREATMENTS OF CORROSION RESISTANT STEELS CLEANING AND STRIPPING OF PAINTED SURFACES CROMATE CONVERSION COATING CHROMIC ACID ANODIZING (A1) APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) EPOXY PRIME Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: the use of convention ovens FACi 1849.00 and FACi 1382.00 at a nominal operating temperature of 140°F BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limitation to Surface preparation for electrical bonding ONLY . BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limitation to Manual Riveting ONLY BAPS 157-27 INTEGRAL FUEL TANK SEALING Limitation: without fastener sealing BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation to Type 2 for Electrical Bonding ONLY BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: Limitation to : Limitation: => Solution treatment of Bare Aluminum with a thickness of 0.020" to 0.100" Limitation: => Clad Aluminum with a thickness of 0.016" to 0.125" Limitation: => Artificial aging of Aluminum with thickness of 0.025" to 0.125" Limitation: in Page 306 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Limitation: => Furnace FACi 1737 to solution treated material between 870 F and 985 F Limitation: => Oven FACi 1382 between 225 F and 375 F. FIELD AVIATION EAST LTD., 0000106483 2450 DERRY ROAD E., HANGAR 2 MISSISSAUGA, ON CA, L5S 1B2 TEL: 905-676-4158-232 FAX: 905-676-8593 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Canadian AMO approval 13-74 & EASA dual approval EASA.145.7029. FIGEAC AERO, 0000108206 ZONE ARTISANALE DE L'AIGUILLE FIGEAC, 46 FR, 46100 TEL: 33 5 6534 8151 FAX: 33 5 6534 8364 Class: A SUBCONTRACTORS Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 175-006 INSTALLATION OF BUSHING USING FORCEMATE COLD EXPANSION PROCESS PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN PSPEC 907 INSTALLATION & RETENTION OF BEARINGS BY GROOVE STAKING Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Forced Drying of Touch-up Only BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Touch-up only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Touch-up only BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limitation to ink marking only Limitation: Limitation to ink marking only Limitation: Limited to Electro Chemical etch Identing of Titanium Parts Only. BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Metallic parts only Page 307 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limitation to manual installation only BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation to type II only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to type II with prep-pen only MPS 250-201 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES AEROSPATIALE A330/A340 PROGRAM MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 FIGEAC AERO, NORTH AMERICA, INC., 0000104775 9313 E. 39TH ST. N. WICHITA, KS US, 67226-2909 TEL: 316 634 2500 FAX: 316 634 0777 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAPS 136-120 POLISHING OF ALUMINUM ALLOY SKIN BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Page 308 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 185-02 SHOT PEENING OF METAL PARTS BAPS 185-03 PEEN FORMING OF METAL PARTS CAPTIVE LABORATORY LES 1004 PENETRANT INSPECTION LES 1045 ANODIZING, CHROMIC ACID LES 1047 CHEMICAL FILM TREATMENT, APPLICATION OF - ALUMINUM ALLOYS LES 1079 EPOXY FINISH, FUEL RESISTANT, APPLICATION OF LES 1271 FORMING OF ALUMINUM ALLOYS BY SHOT PEENING LES 1365 SHOT PEENING PPS 17.03 SHOT PEENING PPS 17.04 SHOT PEEN FORMING PPS 20.03 PENETRANT FLAW DETECTION PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 32.01 CROMATE CONVERSION COATING PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: approval limtied to the preparation of electrical bonding surface BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: FOR MANUAL RIVETING ONLY BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: limited to dry ice and liquid nitrogen methods only. FIKE CANADA INC., 0000107753 4400 MAINWAY BURLINGTON, ON CA, L7L 5Y5 TEL: 905 681 3100 FAX: 905 681 3107 Class: B EQUIPMENT SUPPLIERS FIKE METAL PRODUCTS, 704 S.W. 10TH ST. BLUE SPRINGS, MO US, 64015-4263 Class: B EQUIPMENT SUPPLIERS 0000107754 Page 309 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 816 229 3405 FAX: 816 229 4615 FIMAC S.P.A., 0000125729 VIA PIEMONTE 19 SENAGO, MI IT, 20030 TEL: 02 99 01 07 54 FAX: 02 99 01 07 59 Class: B EQUIPMENT SUPPLIERS FINE TUBE LTD., 0000121259 ESTOVER WORKS, PLYMOUTH ROAD PLYMOUTH, PY GB, PL6 7LG TEL: 01752 735851 FAX: 01752 733301 Class: C MANUFACTURER FINMECCANICA S.P.A., 0000117207 VIALE DELL'AERONAUTICA POMIGLIANO D'ARCO, NA IT, 80038 TEL: 081 8877173 FAX: 081 8872872 Class: A SUBCONTRACTORS FIRSTMARK AEROSPACE CORP., 0000111045 1176 TELECOM DR. CREEDMOOR, NC US, 27522-8294 TEL: 919 956-4398 FAX: 919 682 3786 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval E9HR396N & EASA dual approval EASA.145.5064. FISKE BROTHERS REFINING CO., 0000108464 1500 OAKDALE AVE. TOLEDO, OH US, 43605-3843 TEL: 419 691 2491 FAX: 419 693 3806 Class: C MANUFACTURER Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Approved for Type 2 Touch-up application only. BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Approved for Type 2 touch-up application only. BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Approved for Type 2 (manual) application only. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Approved for Type 2 (manual) application only. BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limited to interference fit installation of bushings using liquid nitrogen. Page 310 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval FITZ MFG. INDUSTRIES, 0000107009 6625 IRON HORSE BLVD. N. RICHLAND HILLS, TX US, 76180-6027 TEL: 817 281 8816-108 FAX: 817 887 5401 Class: A SUBCONTRACTORS C MANUFACTURER Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Vibro-Engraving for all metallic material except Titanium and Titanium alloys. FLABEG TECHNICAL GLASS, 0000100910 CHURCH & BRIDGE ST. NAUGATUCK, CT US, 06770-3199 TEL: 203 729 5227-225 FAX: 203 729 8400 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limitation to: Learjet Programs ONLY FLAME ENTERPRISES INC., 0000102013 21500 GLEDHILL ST. CHATSWORTH, CA US, 91311-5878 TEL: 301-668-0636 FAX: 301-668-0638 Class: D DISTRIBUTOR FLAMEMASTER CORP., 0000108431 13576 DESMOND ST. PACOIMA, CA US, 91331-2315 TEL: 818 890 1401 FAX: 818 890 6001 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 643 FLEET CANADA INC., 0000107011 1011 GILMORE ROAD FORT ERIE, ON CA, L2A 5M4 TEL: 905 871 2100-298 FAX: 905 871 1808 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY PPS 01.02 FORMING ALUMINUM ALLOYS PPS 01.03 HOT JOGGLING OF ALUMINUM ALLOYS PPS 02.64 INSTALLATION OF POTTING TYPE SANDWICH PANEL Page 311 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval FASTENERS PPS 09.06 ELECTRICAL BONDING AND GROUNDING OF AIRCRAFT STRUCTURES PPS 10.08 FORMING THERMOPLASTIC SHEET PPS 10.12 POTTING OF A/C PARTS & ASSEMBLIES PPS 10.15 WET LAY-UP FABRICATION OF EPOXY RESIN/GLASS FABRIC REINFORCED LAMINATES PPS 10.17 MACHINING OF PLASTICS PPS 10.21 CERTIFICATION OF AUTOCLAVES PPS 10.22 PREPARATION OF MOLDS PPS 10.23 STORAGE, HANDLING AND PREPARATION OF PRE-IMPREGNATED MATERIALS PPS 10.24 PREPARATION OF HONEYCOMB CORES FOR LAY-UP IN SANDWICH PANEL ASSEMBLIES PPS 10.25 STORAGE & APPLICATION OF FILM ADHESIVES USED IN COMPOSITE ASSEMBLIES PPS 10.28 ASSEMBLY OF WIRE THERMOCOUPLES PPS 10.35 FABRICATION OF 250 F CURE, EPOXY RESIN PRE-IMPREGNATED, FIBRE REINFORCED COMPOSITE PARTS PPS 10.39 MACHINING OF FIBRE REINFORCED COMPOSITE PARTS PPS 10.40 REPAIRS TO PRE-IMPREGNATED LAMINATES AND SANDWICH PANELS PPS 10.43 FABRICATION OF 350F CURE, EPOXY RESIN PRE-IMPREGNATED, FIBRE REINFORCED COMPOSITE PARTS PPS 10.52 CERTIFICATION OF PLATEN PRESSES PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS PPS 21.20 MIXING AND HANDLING TWO PART SEALANTS PPS 21.21 GENERAL SEALING PRACTICES PPS 25.14 GENERAL ELECTRIC PSA529/SRC-18 SILICONE BASE ADHESIVE PPS 25.23 EC-1300 ADHESIVE PPS 25.30 BONDING USING DHMS A6.09 EPOXY ADHESIVE PPS 25.52 EC-2216 B/A GREY ADHESIVE PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS Page 312 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PPS 30.03 HEAT TREATMENT AND CONTROL OF 2024 (DD) RIVETS PPS 30.08 STEEL HEAT TREATMENT - MARTENSITIC STAINLESS STEEL PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.03 PRE CLEANING OF STEELS PPS 31.05 SURFACE TREATMENTS OF CORROSION RESISTANT STEELS PPS 31.07 CLEANING AND STRIPPING OF PAINTED SURFACES PPS 32.01 CROMATE CONVERSION COATING PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PPS 34.19 APPLICATION OF F14 ANTI-STATIC COATING PPS 34.34 SURFACE FINISHING COMPOUNDS (F33) PPS 34.41 APPLICATION OF EPOXY-POLYAMIDE ENAMEL (F22) PPS 36.07 METAL TO METAL & METAL TO METAL HONEYCOMB HIGH STRENGTH BONDING USING DHMS A6.03 ADHESIVE FILM &PRIM PPS 36.10 METAL BONDING OF DE HAVILLAND PARTS TO BAC 5555 AND BAC 5514 Specification Controlled with Limitations: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION Limitation: CAPTIVE LABORATORY 1A,1B,1C,2C,2A,2D,3B,3D,5A,5E BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Unit # 2 paint drying oven Dry-Sys s/n: 4-2733 nominal operating temperature range 130F°-160F° . BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Surface preparation ONLY . BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual Riveting ONLY . BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-27 INTEGRAL FUEL TANK SEALING Limitation: NOT APPROVED for fastener sealing ( dome sealing and seal caps ) . BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 2 ( Manual application ) ONLY . FLEXCO INC., 0000100945 Class: Page 313 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 6855 SUVA ST. BELL GARDENS, CA US, 90201-1937 TEL: 562 927 2525 FAX: 562 927 2528 B EQUIPMENT SUPPLIERS FLEXCON, 0000130355 1 FLEXCON INDUSTRIAL PARK SPENCER, MA US, 01562 TEL: 508 885 8200 FAX: 508 885 8400 Class: C MANUFACTURER FLEXFAB LLC., 0000107005 1699 W. M-43 HWY. HASTINGS, MI US, 49058-8377 TEL: 269 945 3533-254 FAX: 269 945 4802 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION FLEXFIRM PRODUCTS INC., 0000107012 2300 CHICO AVE. N. EL MONTE S., CA US, 91733-1611 TEL: 626 448 7627 FAX: 626 579 5116 Class: C MANUFACTURER FLIGHTLINE ELECTRONICS, INC., 0000103365 7625 OMNITECH PLACE VICTOR, NY US, 14564-9795 TEL: 585 924 4000 FAX: 585 924 5732 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval FSYR483X & EASA dual approval EASA.145.5685. FLOATS & FUEL CELLS, 0000105012 4010 PILOT DR., SUITE 103 MEMPHIS, TN US, 38118-6916 TEL: 800 647 6148 FAX: 999 999 9999 Class: B EQUIPMENT SUPPLIERS FLUID COMPONENTS INTL., 0000102072 1755 LA COSTA MEADOWS DR. SAN MARCOS, CA US, 92078 TEL: 800-854-1993 FAX: 760-736-6260 Class: B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 197 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 314 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval FLUROCARBON COMPANY LIMITED, 0000130562 CAXTON HILL HERTFORD, HT GB, SG13 7NH TEL: 1992 550731 FAX: 1992 584697 Class: C MANUFACTURER FLY N SHINE, 0000137314 340 DES MUGUETS SAINT-MATHIEU-DE-BOLEIL, QC CA, J3G 0G8 TEL: 514-799-1445 FAX: 450-813-1225 Class: A SUBCONTRACTORS FLY-BY-WIRE SYSTEMS FRANCE, 0000132490 1 AVE. MARC SEGUIN ST VALLIER, 26 FR, 26240 TEL: 4 75 03 40 83 FAX: 4 75 03 40 01 Class: B EQUIPMENT SUPPLIERS FLYHT AEROSPACE SOLUTIONS LTD., 0000129513 1144 29TH AVE. N.E., 200W CALGARY, AB CA, T2E 7P1 TEL: 403 291 7429 FAX: 403 291 9717 Class: B EQUIPMENT SUPPLIERS FLYING COLOURS CORP, 0000116364 657 BELL AVE. CHESTERFIELD, MO US, 63005 TEL: 636 530 7000-... FAX: 636 530 7001 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval DELR158D & EASA dual approval EASA.145.5925 FLYING COLOURS CORP., 0000121601 901 AIRPORT ROAD, UNIT 120, PETERBOROUGH PETERBOROUGH, ON CA, K9J 0E7 TEL: (705) 742-4688 FAX: 705-742-8861 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION FLYING COLOURS CORP., 710 GODDARD CHESTERFIELD, MO Class: A SUBCONTRACTORS 0000135312 Specification Controlled with Limitations: BAPS 136-120 POLISHING OF ALUMINUM ALLOY SKIN Limitation: Performance of Process at Bombardier sites only. Specification Controlled: BAPS 138-050 EXTERIOR PAINTING BOMBARDIER AIRCRAFT BAPS 138-45 APPLICATION OF CMS 565-12 CONDUCTIVE COATING TO PLASTIC SURFACES BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Page 315 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 63005 TEL: 636-530-7000 FAX: 999 999 9999 FMH CORP., 0000107595 17072 DAIMLER ST. IRVINE, CA US, 92614-5548 TEL: 714 751 1000-217 FAX: 714 545 6619 Class: A SUBCONTRACTORS C MANUFACTURER FOKKER ELMO (LANGFANG) ELECTRICAL, 0000132503 NO.71, XIANGYUN ROAD, LANGFANG E&T LANGFANG, 170 CN, 065001 TEL: 86 316 597 86 00 FAX: 86 316 597 86 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS FOKKER ELMO B. V., 0000109157 AVIOLANDALAAN 33 HOOGERHEIDE, 07 NL, 4631 RP TEL: 164 617 336 FAX: 31 164 61 77 00 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EASA approval NL.145.1308 & FAA Repair Station dual approval FEOY206X. Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Specification Controlled with Limitations: BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation: Type 2 only FOKKER ELMO TURKEY, 0000136518 EGE SERBEST BOLGESI, SADI SOKAK NO.10 GAZIEMIR, 35 TR, 35410 TEL: 514 855 5000 FAX: 514 855 5000 Class: B EQUIPMENT SUPPLIERS FOKKER SERVICES, 0000111035 5169 SOUTHRIDGE PKWY., SUITE 100 ATLANTA, GA US, 30349-5952 TEL: 770 991 4351 FAX: 770 991 4360 Class: D DISTRIBUTOR FOREST CITY GEAR CO., Class: 0000107596 Page 316 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 11715 MAIN ST. ROSCOE, IL US, 61073-9567 TEL: 815 623 2168 FAX: 815 623 6620 B EQUIPMENT SUPPLIERS FORTNER ENGINEERING & MFG. INC., 0000124856 918 THOMPSON AVE. GLENDALE, CA US, 91201 TEL: 818 240 7740 FAX: 999 999 9999 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Limitation: EASA approval EASA.145.4451 & FAA Repair Station approval PU3R776L. FOTHERGILL ENGINEERING FABRICS LTD., TODMORDEN ROAD SUMMIT LITTLEBOROUGH, LA GB, OL15 9LZ TEL: 1706 756015 FAX: 1706 374119 Class: C MANUFACTURER 0000108006 FOURNITURES POUR SERIGRAPHIE, 0000108107 4059 ST-JEAN-BAPTISTE MONTREAL, QC CA, H1B 5V3 TEL: 514 640 4444 FAX: 514 640 0640 Class: D DISTRIBUTOR FPD COMPANY, 0000130911 124 HIDDEN VALLEY ROAD MCMURRAY, PA US, 15317 TEL: 724 731 2112 FAX: 724 731 2112 Class: A SUBCONTRACTORS FRANKLIN EMPIRE INC., 8421 DARNLEY ROAD MONT-ROYAL, QC Class: D DISTRIBUTOR 0000107016 Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Approval to Electro Chemical Etch Ident Only. BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Method 1 _Cutter Pins ONLY . BAPS 175-006 INSTALLATION OF BUSHING USING FORCEMATE COLD EXPANSION PROCESS Limitation: to Class 2 : Installation of special design ForceMate bushings. Page 317 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval CA, H4T 2B2 TEL: 514 341 9720 FAX: 514 341 3907 FREE FLIGHT SYSTEMS, INC., 0000101934 3700 INTERSTATE 35 WACO, TX US, 76706-3756 TEL: 254 662 7081 FAX: 254 662 9451 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION FREEMAN CO., 0000107017 8TH & WALNUT ST. YANKTON, SD US, 57078 TEL: 800-843-6807 FAX: 605-665-7456 Class: C MANUFACTURER FREEMAN MFG. & SUPPLY CO., 0000107207 3475 PITFIELD BLVD. ST-LAURENT, QC CA, H4S 1H3 TEL: 514-335-3530 FAX: 514 335 3225 Class: D DISTRIBUTOR FREUDENBERG-NOK INC., 0000101117 65 SPRUCE ST. TILLSONBURG, ON CA, N4G 5C4 TEL: 519 983 1240 FAX: 734 354 5891 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER FRIEDMANS MICROWAVE & APPLIANCE, 0000111077 1827 E. SPRING ST. LONG BEACH, CA US, 90806-1919 TEL: 562-989-7756 FAX: 562 285 1168 Class: H COMMERCIAL OFF THE SHELF FTG AEROSPACE DIV., 0000107763 10 COMMANDER BLVD. TORONTO, ON CA, M1S 3T2 TEL: 416 438 6076-372 FAX: 416 438 8065 Class: B EQUIPMENT SUPPLIERS FTI FLOW TECHNOLOGY INC., 0000107588 8930 S. BECK AVENUE, SUITE 107 Class: B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 318 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEMPE, AZ US, 85284 TEL: 480-240-3371 FAX: 480-240-3401 FTI INC., 0000116227 1611 ST-ANDREWS DR. LAWRENCE, KS US, 66047-1701 TEL: 785 865 1400 FAX: 785 865 1441 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods FTS INC., 0000134244 1100 JONES STREET LITTLE ROCK, AR, AR US, 72202 TEL: 501 374 4402 FAX: 501 374 4035 Class: A SUBCONTRACTORS FUCHS LUBRICANT (UK) PLC, 0000135563 NEW CENTURY STREET HANLEY STOKE ON TRENT, ST GB, ST1 SHU TEL: 44 1782 203700 FAX: 44 1782 202073 Class: C MANUFACTURER FUCHS LUBRICANTS CANADA LTD., 0000136540 405 DOBBIE DRIVE CAMBRIDGE, ON CA, N1T 1S8 TEL: 519 622 2040 FAX: 519 622 2220 Class: C MANUFACTURER FUCHS LUBRICANTS CO., 0000133550 17050 LATHROP AVENUE HARVEY, IL US, 60426 TEL: 708 333 9180 FAX: 708 333 9180 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM supplier #1123 FUCHS SCHMIERSTOFFE GMBH, 0000134804 FRIESENHEIMER STRABE 19 MANNHEIM, 06 DE, 68169 TEL: 49 621 3701 0 FAX: 49 621 3701 570 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: See EMCM #1146 FUJIWARA CO. LTD., Class: Specification Controlled: 0000110141 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Application of FTS / Fiber ProTector FP00547 for NETJETS customers ONLY . Page 319 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 1 MEOTOGOSHI MUTSUSHI KITANAGOYA-CITY, 23 JP, 4818505 TEL: 81 56 821 2331 FAX: 81 56 825 2431 A SUBCONTRACTORS FULLER INDUSTRIES, LLC, 0000103603 1 FULLER WAY GREAT BEND, KS US, 67530-0214 TEL: 1-800-227-2961 FAX: 1-620-793-4522 Class: B EQUIPMENT SUPPLIERS FUSHI COPPERWELD, 0000108937 254 COTTON MILL ROAD FAYETTEVILLE, TN US, 37334-7249 TEL: 931 433 7177 FAX: 931 433 0419 Class: C MANUFACTURER FUTURAMIC TOOL & ENG. CO., 24680 GIBSON WARREN, MI Class: A SUBCONTRACTORS 0000108953 Learjet Approved Suppliers Scope of Approval BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... CAPTIVE LABORATORY MPS 176-07 ULTRASONIC INSPECTION OF WROUGHT METALS PPS 10.21 CERTIFICATION OF AUTOCLAVES PPS 10.22 PREPARATION OF MOLDS PPS 10.23 STORAGE, HANDLING AND PREPARATION OF PRE-IMPREGNATED MATERIALS PPS 10.24 PREPARATION OF HONEYCOMB CORES FOR LAY-UP IN SANDWICH PANEL ASSEMBLIES PPS 10.28 ASSEMBLY OF WIRE THERMOCOUPLES PPS 10.35 FABRICATION OF 250 F CURE, EPOXY RESIN PRE-IMPREGNATED, FIBRE REINFORCED COMPOSITE PARTS PPS 10.39 MACHINING OF FIBRE REINFORCED COMPOSITE PARTS PPS 21.20 MIXING AND HANDLING TWO PART SEALANTS PPS 25.52 EC-2216 B/A GREY ADHESIVE PPS 25.63 EC-1300-L ADHESIVE PPS 39.06 INSTALLATION OF DHC-8 AIRFRAME DE-ICING BOOTS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: LIMITED TO PURCHASE RAW MATERIAL ONLY FROM A Page 320 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification US, 48089-2078 TEL: 586 758 2200 FAX: 586-758-0641 Learjet Approved Suppliers Scope of Approval VALUE ADDED DISTRIBUTOR (MPS-168-13). FINAL HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING (MPS 168-13) TO BE FUTURE AVIATION, 0000110801 14111 JETPORT LOOP FORT MYERS, FL US, 33913-7705 TEL: 239 225 0101-... FAX: 239 225 0340 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Approved for maintenace activities on accessories for Bombardier CL600/601/604, RJ Limitation: 100/200/700/900, DHC-7, DHC-8 programs per following certificates; Limitation: - FAA XC4R643M, Limitation: - EASA.145.4457 FUTURE METALS LLC., 0000101066 3751 NEW YORK AVENUE ARLINGTON, TX US, 76014 TEL: 800-733-0960 FAX: 954-721-5050 Class: D DISTRIBUTOR FUTURE METALS LLC., 0000132282 22 N. PLAINS INDUSTRIAL ROAD WALLINGFORD, CT US, 06492 TEL: 203 303 7525 FAX: 203 303 7521 Class: D DISTRIBUTOR FUTURE METALS LLC., 0000107026 10401 STATE ST. TAMARAC, FL US, 33321-6411 TEL: 800 733 0960 FAX: 954 721 5050 Class: D DISTRIBUTOR G & H AEROSPACE INC., 0000102097 9096 EAST BAHIA DRIVE# A102 SCOTTSDALE, AZ US, 85260 TEL: 480 951 5800 FAX: 480 951 8431 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods G BOPP & CO. AG, BACHMANNWEG 20 ZURICH, AG Class: C MANUFACTURER 0000109962 Page 321 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval CH, 8046 TEL: 01-377-66 66 FAX: 01-377-66 77 G K M AEROSPACE LTD., 0000129789 2 WOLLASTON WAY BASILDON, ES GB, SS13 1DJ TEL: 01268 727278 FAX: 999 999 9999 Class: A SUBCONTRACTORS G&S TITANIUM, INC., 0000130353 4000 LINCOLN WAY E. WOOSTER, OH US, 44691 TEL: 330 263 0564 FAX: 330 262 1550 Class: C MANUFACTURER G. BAKER STEEVES CORP., 0000108257 480 E. 76 TH AVE. DENVER, CO US, 80229 TEL: 800 498 4536 FAX: 303 853 9569 Class: H COMMERCIAL OFF THE SHELF G. ESTEVE S.A., 0000106993 8 RUE CLAUDE-GONIN TOULOUSE, 31 FR, 31400 TEL: 33 561 54 42 20 FAX: 561 34 94 26 Class: C MANUFACTURER G. PARKER ENGINEERING LTD., 0000108604 PERSEVERANCE MILL GRANGE LANE ACCRINGTON, LA GB, BB5 1HX TEL: 1254 384235 FAX: 1254 872584 Class: A SUBCONTRACTORS G.A.Z.C., 0000124845 C/CARTAGENA 11 Y 13 PINTO, 28 ES, 28320 TEL: 9169 12613 FAX: 9169 20481 Class: A SUBCONTRACTORS G.O. CARLSON INC., 0000108342 350 MARSHALLTON-THORNDALE ROAD Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM-001 supplier #1076 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 322 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification DOWNINGTOWN, PA US, 19335-2063 TEL: 610 384 2800 FAX: 610 383 3429 G.R. TRATTAMENTI TERMICI - GRTT. S., VIA MARITTIMA 11 km 5700 PONTINIA, LI IT, 04014 TEL: 0773853193 FAX: 999 999 9999 Scope of Approval Limitation: SEE EMCM 0000129695 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-14 HEAT TREATMENT OF STEELS BAPS 168-15 STRESS RELIEF OF METALS BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS GA ENGINEERING NORTHWEST LIMITED, 0000132725 UNIT 1, SOUTHGATE, WHITE LUND MORECAMBE, LA GB, LA3 3DA TEL: 01524 542615 FAX: 01524 542615 Class: A SUBCONTRACTORS GA INDUSTRIES LTD., 0000127857 736 BANGJI-RI, SANAM-MYUN SACHEON-CITY, 11 KR, 664-942 TEL: 55 855 8500 FAX: 55 855 8502 Class: A SUBCONTRACTORS GA TELESIS COMPOSITE REPAIR GROUP, 0000132956 3420 NW 53RD ST. FORT LAUDERDALE, FL US, 33309 TEL: 954 486 8797 FAX: 954 486 8797 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS GA TELESIS COMPOSITE REPAIR GROUP,, 3950 N.W. 28TH ST. MIAMI, FL US, 33142 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS 0000132955 Specification Controlled: PPS 20.03 PENETRANT FLAW DETECTION PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.07 CLEANING AND STRIPPING OF PAINTED SURFACES PPS 32.01 CROMATE CONVERSION COATING PPS 32.02 MANUAL APPLICATION OF CHEMICAL CONVERSION COATINGS PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PPS 34.41 APPLICATION OF EPOXY-POLYAMIDE ENAMEL (F22) Page 323 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 305 871 3383 FAX: 305 871 3383 GABLES ENGINEERING CO., 0000103760 247 GRECO AVE. CORAL GABLES, FL US, 33146-1808 TEL: 305-774-4400 FAX: 305 774 4462 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval G3ER114N & EASA dual approval EASA.145.4459. GALAXY TOOL CORP., 0000108668 1111 INDUSTRIAL ROAD WINFIELD, KS US, 67156-9133 TEL: 620 221 6262 FAX: 620 221 0913 Class: B EQUIPMENT SUPPLIERS GALVATEC S.L., 0000121230 PARQUE TECNOLOGICO AEROSPACIAL LA RINCONADA, 41 ES, 41309 TEL: 95 411 50 26 FAX: 95 411 50 27 Class: A SUBCONTRACTORS GARDNER AEROSPACE, 0000109920 UNIT 3A, MELTON PARK S.W., GIBSON LANE MELTON, YW GB, HU14 3HB TEL: 01482 633144 FAX: 01482 633180 Class: A SUBCONTRACTORS GARDNER AEROSPACE BASILDON LTD., 0000115735 WOLLASTON HOUSE, WOLLASTON WAY BASILDON, ES GB, SS13 1DJ TEL: 1268 729311 FAX: 1268 728951 Class: A SUBCONTRACTORS Specification Controlled: BAPS 176-04 MAGNETIC PARTICLE INSPECTION Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Page 324 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PPS PPS PPS PPS PPS PPS 01.02 20.03 31.02 32.01 32.03 34.08 FORMING ALUMINUM ALLOYS PENETRANT FLAW DETECTION CLEANING PROCESSES OF ALUMINUM CROMATE CONVERSION COATING CHROMIC ACID ANODIZING (A1) EPOXY PRIME GARDNER AEROSPACE DERBY, 0000133744 UNIT 9 VICTORY PARK, 2 VICTORY ROAD DERBY, DB GB, BE24 8ZF TEL: +44 (0) 1332 ... FAX: 514 855 5000 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. CAPTIVE LABORATORY PPS 01.02 FORMING ALUMINUM ALLOYS PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS PPS 30.07 HEAT TREATMENT OF BERYLLIUM COPPER ALLOYS PPS 30.08 STEEL HEAT TREATMENT - MARTENSITIC STAINLESS STEEL PPS 31.02 CLEANING PROCESSES OF ALUMINUM GARDNER DENVER OBERDORFER PUMPS, IN, 5900 FIRESTONE DR. SYRACUSE, NY US, 13206-1103 TEL: 800-448-1668 FAX: 315-463-9561 Class: B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to Pumps- Part Numbers: 7466, 11237, 401M3, 401M03 and 8230 For CL215/415 Limitation: programs 0000116446 GARLOCK SEALING TECHNOLOGIES, 0000128168 1666 DIVISION ST. PALMYRA, NY US, 14522-9355 TEL: 315 597 4811 FAX: 999 999 9999 Class: C MANUFACTURER GARMIN INTL., 0000101546 1200 151ST ST. E. OLATHE, KS US, 66062-3426 TEL: 913 397 8200 FAX: 913 397 8282 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER E MAINTENANCE ORGANIZATION GASE MARINE & GENERAL, Class: 0000108882 Page 325 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 7 TOWER PARK ROAD DARTFORD, KE GB, DA1 4LB TEL: 13 22 552 980 FAX: 13 22 552 986 A SUBCONTRACTORS GCM COMPUTERS INC., 0000105241 101 MOUNTAIN W. FAYETTEVILLE, AR US, 72701-6090 TEL: 479 521 3100 FAX: 479 521 3188 Class: H COMMERCIAL OFF THE SHELF GE AIRCRAFT ENGINES, 0000108572 3701 S. MIAMI BLVD. DURHAM, NC US, 27709-4950 TEL: 919-361-4461 FAX: 919-361-4420 Class: B EQUIPMENT SUPPLIERS GE AIRCRAFT ENGINES- PEEBLES, 0000108573 1200 JAYBIRD ROAD PEEBLES, OH US, 45660-9550 TEL: 937-587-4844 FAX: 513-552-5910 Class: B EQUIPMENT SUPPLIERS GE AVIATION SYSTEMS LLC., 0000100535 14100 ROOSEVELT BLVD., DOCK B CLEARWATER, FL US, 33762-0000 TEL: 727-563-5000-0 FAX: 727 255 5296 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval RI3R816L & EASA dual approval EASA.145.4878. GE AVIATION SYSTEMS LLC., 0000103703 114 POWERS CT. STERLING, VA US, 20166-9321 TEL: 703-421-4421 FAX: 703-450-0087 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval MS1R333K & EASA dual approval EASA.145.5592. GE AVIATION SYSTEMS LLC., 0000107659 3290 PATTERSON AVE. S.E. GRAND RAPIDS, MI US, 49512-1934 TEL: 616 241 8766 FAX: 616 241 7318 Class: B EQUIPMENT SUPPLIERS Page 326 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval GE AVIATION SYSTEMS LLC., 0000100868 1354 CLIFFORD AVE. LOVES PARK, IL US, 61111-4766 TEL: 815-637-3166 FAX: 815 637 5375 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval KA2R945K & EASA dual approval EASA.145.4237. GE AVIATION SYSTEMS LTD., 0000109883 KINGS AVE. HAMBLE-LE-RICE SOUTHAMPTON, HA GB, SO31 4NF TEL: 02380 453 371 FAX: 02380 744 042 Class: F STRUCTURAL SUPPLIER Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-27 INTEGRAL FUEL TANK SEALING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 186 CHEMICAL MILLING OF ALUMINUM PPS 01.02 FORMING ALUMINUM ALLOYS PPS 06.13 INSTLLATION FO PERMASWAGE FITTINGS PPS 06.14 ASSEMBLY OF WIGGINS SWAGED CONNECTORS PPS 10.40 REPAIRS TO PRE-IMPREGNATED LAMINATES AND SANDWICH PANELS PPS 10.59 NET RESIN SYSTEM EPOXY COMPOSITE COMPONENTS (179C AUTOCLAVE CURE) PPS 20.03 PENETRANT FLAW DETECTION PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 21.20 MIXING AND HANDLING TWO PART SEALANTS PPS 21.21 GENERAL SEALING PRACTICES PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS PPS 30.14 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.07 CLEANING AND STRIPPING OF PAINTED SURFACES PPS 32.01 CROMATE CONVERSION COATING PPS 32.02 MANUAL APPLICATION OF CHEMICAL CONVERSION COATINGS PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) Page 327 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PPS 34.08 PPS 34.11 PPS 42.01 PSPEC 300 PSPEC 410 PSPEC 416 STEELS PSPEC 419 ALUMINIUM PSPEC 615 PSPEC 706 PSPEC 905 PSPEC 907 STAKING PSPEC 910 GE AVIATION SYSTEMS LTD., 0000103004 BISHOPS CLEEVE CHELTENHAM, GL GB, GL52 8SF TEL: 01242 661449 FAX: 9-0-1144-1242-661 Class: C MANUFACTURER E MAINTENANCE ORGANIZATION GE CONSUMER & INDUSTRIAL TECHNICAL, 1975 NOBLE ROAD, NELA PARK CLEVELAND, OH US, 44112 TEL: 216 266 2083 FAX: 216 266 3372 Class: H COMMERCIAL OFF THE SHELF GE ENGINE SERVICES DISTRIBUTION LLC, 1800 DONALDSON ROAD ERLANGER, KY US, 41018-3111 TEL: 513-552-4301 FAX: 513-552-4301 GE ENGINE SERVICES, INC., 0000107030 STROTHER FIELD INDUSTRIAL PARK ARKANSAS CITY, KS US, 67005 TEL: 620 442 3600 FAX: 620 442 7595 0000104735 0000107919 EPOXY PRIME PRIMING AND PAINTING OF AIRCRAFT EXTERIOR SURFACES CHEMICAL MILLING OF ALUMINUM AND ALUMINUM ALLOYS PENETRANT FLAW DETECTION CHROMIC ACID ANODISING PASSIVATION OF AUSTENITC, MARTENSITIC AND PH CHEMICAL CONVERSION COATING OF ALUMINIUM AND ALLOYS ADVANCED COMPOSITES CHEMICAL MILLING OF ALUMINIUM ALLOYS INSTALLATION & SEALING OF INTERFERENCE FIT BUSHES INSTALLATION & RETENTION OF BEARINGS BY GROOVE ETCH AND EPOXY PRIMING Class: D DISTRIBUTOR Class: B EQUIPMENT SUPPLIERS D DISTRIBUTOR E MAINTENANCE ORGANIZATION Page 328 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification GE INTELLIGENT PLATFORMS, 0000130980 7401 SNAPROLL NE ALBURQUERQUE, NM US, 87109 TEL: 505 875 0600 FAX: 505 875 0400 Class: C MANUFACTURER GE LEXINGTON LAMP PLANT, 0000108808 1801 EDISON DR. LEXINGTON, KY US, 40503-1359 TEL: 859 276 7965 FAX: 859 276 7969 Class: C MANUFACTURER GEB SURFACE TREATMENTS LTD., 0000123174 WHARF ROAD INDUSTRIAL ESTATE PINXTON, NT GB, NG16 6LE TEL: 01773 384981 FAX: 01773 863293 Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Specification Controlled with Limitations: BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 1 (Immersion) and Type 2 (Alodine 1132 Touch & Prep Pen). BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 1 (Immersion) and Type 2 (Alodine 1132 Touch & Prep Pen) GECAS ASSET MANAGEMENT SERVICES, 0000128865 3860 E. HOLMES RD. STE 108 MEMPHIS, TN US, 38118 TEL: 901 547 2324 FAX: 901 205 0652 Class: D DISTRIBUTOR GEMTOR INC., 0000103344 1 JOHNSON AVE. MATAWAN, NJ US, 07747-2509 Class: C MANUFACTURER Page 329 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 732-583-6200 FAX: 732 290 9391 GENAIRE LTD., 0000107033 NIAGARA DISTRICT AIRPORT NIAGARA-ON-THE-LAKE, ON CA, L0S 1J0 TEL: 905 684 1165 FAX: 905 684 2412 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION GENELCO INDUSTRIES INC., 0000103668 UNIT 4 200 13TH AVE. RONKONKOMA, NY US, 11779 TEL: 631-981-6670-214 FAX: 631 981 7225 Class: D DISTRIBUTOR GENERAL CABLE CORP., 0000106807 1600 MAIN ST. W. WILLIMANTIC, CT US, 06226-1128 TEL: 860-465-8728 FAX: 703 876 0515 Class: C MANUFACTURER GENERAL CHEMICAL CORP., 0000133119 12336 EMERSON DR. BRIGHTON, MI US, 48116 TEL: 248 587 5600 FAX: 248 587 5606 Class: Systems with Limitations: C MANUFACTURER 0000 GENERAL LIMITATION / REMARKS H COMMERCIAL OFF THE SHELF GENERAL DYNAMICS, 0000103214 11714 N. CREEK PKWY STE 200 BOTHELL, WA US, 98011 TEL: 425-420-9388 FAX: 425-420-9400 Class: C MANUFACTURER GENERAL DYNAMICS, 0000109316 1200 GLENBROOK DR. N. GARLAND, TX US, 75040-5029 TEL: 972 276 5131 FAX: 972 494 7881 Class: C MANUFACTURER GENERAL ECOLOGY INC., 151 SHEREE BLVD. EXTON, PA Class: C MANUFACTURER 0000102071 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM 001 Page 330 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval US, 19341-1292 TEL: 610-363-7900 FAX: 610-363-0412 GENERAL ELECTRIC AIRCRAFT ENGINE, 0000109181 1000 WESTERN AVE. LYNN, MA US, 01910-0001 TEL: 781-594-0624 FAX: 513 786 1836 Class: B EQUIPMENT SUPPLIERS GENERAL ELECTRIC AIRCRAFT ENGINE, 0000102351 1 NEUMANN WAY ROOM 115 CINCINNATI, OH US, 45215-1915 TEL: 513 552 2607 FAX: 513 786 1836 Class: B EQUIPMENT SUPPLIERS GENERAL ELECTRIC CO., 0000100942 STROTHER FIELD INDUSTRIAL PARK ARKANSAS CITY, KS US, 67005 TEL: 620-442-3600 FAX: 620 442 7349 Class: B EQUIPMENT SUPPLIERS D DISTRIBUTOR E MAINTENANCE ORGANIZATION GENERAL ELECTRIC COMPANY, 0000137484 CRESCENT PARK LOGISTICS CENTER-9819 CRES WEST CHESTER, OH US, 45069 TEL: 514-855-5000 FAX: 514-855-5000 Class: D DISTRIBUTOR GENERAL PLASTICS MFG. CO., 0000107758 4910 SOUTH BURLINGTON WAY TACOMA, WA US, 98409-2833 TEL: 253 330 7776 FAX: 253 473 5104 Class: C MANUFACTURER GENITEST INC., 0000110713 3472 FRONTENAC MONTREAL, QC CA, H2K 3A5 TEL: 514 526 8378 FAX: 514 526 5904 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM Page 331 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) INDEPENDANT LABORATORY Specification Controlled with Limitations: BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. Limitation: limited to tensile testing, bend testing, charpy impact testing and notch tensile stress rupture testing GEORG MARTIN GMBH, 0000134933 MARTINSTRASSE 55 DIETZENBACH, 06 DE, 63128 TEL: 49 0 6074 40 ... FAX: 514 855 5000 Class: C MANUFACTURER GERARD DANIEL WORLDWIDE, 0000110115 MOUNT MAHON INDUSTRIAL ESTATE ABBEYFEALE, LI IE, CO TEL: 353 68 31284 FAX: 353 68 31377 Class: C MANUFACTURER GERARD DANIEL WORLDWIDE, 0000108903 34 BARNHART DR. HANOVER, PA US, 17331-9586 TEL: 800-232-3332- FAX: 717 633 7095 Class: C MANUFACTURER GERARD DANIEL WORLDWIDE, 0000106871 13055 JURUPA AVE. FONTANA, CA US, 92337-6982 TEL: 951 361 1111 FAX: 951-361-1112 Class: C MANUFACTURER D DISTRIBUTOR GERDEAU SPECIAL STEEL NORTH AMERICA, 3000 FRONT ST. E. 0000108647 Class: C MANUFACTURER Page 332 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval MONROE, MI US, 48161-1973 TEL: 734 243 2446 FAX: 734 243 3122 GERFLOR S.A.S., 0000110826 43 GARIBALDI BLVD. TARARE, 69 FR, 69170 TEL: 33 4 74 05 40 70 FAX: 474 050683 GESELLSCHAFT FUR WOLFRAM INDUSTRIE, PERMANEDER STRASSE 34 TRAUNSTEIN, 09 DE, 83278 TEL: 49 861 98790 FAX: 49 861 98791 Class: C MANUFACTURER 0000135562 GFI, 0000101836 180 LABROSSE AVE. POINTE-CLAIRE, QC CA, H9R 1A1 TEL: 514 630 4877-227 FAX: 514 630 4849 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limitation to ink marking only BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: MPS145-02 Electrical Bonding of Aircraft Limitation: Limitation : Limited to " Blind Ground Stud Installation in Aluminum Structure ". BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING Limitation: Limited to Rayrim - Edge Protective Material installation ONLY (Sec.6.13) BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: LIMITED TO WET INSTALLATION OF FASTENERS BAPS 172-34 FUSION WELDING Limitation: LIMITED TO MATERIAL GROUP IA (%C<0.35%), IIA Page 333 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval (EXCEPT HARDENABLE STAINLESS STEEL), IIA & IV GGB BEARING TECHNOLOGY, 0000107029 700 MID ATLANTIC PKWY. THOROFARE, NJ US, 08086 TEL: 856-686-2753 FAX: 856 848 4552 GINGER'S INTERNATIONAL BATH CENTRE, 95 RONALD AVE. TORONTO, ON CA, M6B 4L9 TEL: 416 787 1787 FAX: 416 787 1748 Class: C MANUFACTURER 0000110525 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods GIOCOM LLC, 0000136077 6401 E. ROGERS CIRCLE, SUITE 4 BOCA RATON, FL US, 33487 TEL: 561-757-6026 FAX: 561 948 2057 Class: D DISTRIBUTOR GKN AEROSPACE - MUNCIE, 0000119680 3901 S. DELAWARE DR. MUNCIE, IN US, 47302 TEL: 765 747 7147 FAX: 765 282 1372 Class: A SUBCONTRACTORS C MANUFACTURER Specification Controlled with Limitations: PSPEC 420 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS Limitation: Limited to solution heat treatment and precipitation of titanium and titanium alloys. GKN AEROSPACE AEROSTRUCTURES, 0000122281 LYSANDER ROAD YEOVIL, SO GB, BA20 2YB TEL: 1935 704133 FAX: 1935 704334 Class: F STRUCTURAL SUPPLIER Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 157-32 HIGH TEMPARATURE SEALING FOR NON -FUEL TANK APPLICATIONS BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-31 LOCALIZED BRUSHING PLATING BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF Page 334 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 168-15 STRESS RELIEF OF METALS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 188-05 LASER CUTTING OF METALS PPS 01.02 FORMING ALUMINUM ALLOYS PPS 01.13 LASER CUTTING TITANIUM PPS 01.36 FORMING OF TITANIUM AND TITANIUM ALLOYS PPS 20.03 PENETRANT FLAW DETECTION PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.05 SURFACE TREATMENTS OF CORROSION RESISTANT STEELS PPS 31.09 CLEANING OF TITANIUM PPS 32.01 CROMATE CONVERSION COATING PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME Specification Controlled with Limitations: PPS 30.14 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS Limitation: Stress relief only. Limitation: Stress relief only. Limitation: LIMITATION: STRESS RELIEF ONLY GKN AEROSPACE BANDY MACHINING, 0000102465 3420 N. SAN FERNANDO BLVD. BURBANK, CA US, 91504-2532 TEL: 818 846 9020 FAX: 818 846 0621 Class: C MANUFACTURER GKN AEROSPACE CAMARILLO, INC., Class: 0000108609 Specification Controlled: Page 335 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 4680 CALLE CARGA CARMARILLO, CA US, 93012-8559 TEL: 805 383 6684 FAX: 805 383 6683 A SUBCONTRACTORS GKN AEROSPACE DEUTSCHLAND GMBH, 0000128066 BRUNHAMSTRASSE 21 MUNICH, 09 DE, 81249 TEL: 08987 153022 FAX: 999 999 9999 Class: F STRUCTURAL SUPPLIER Scope of Approval PSPEC 236 FABRICATION OF STEELS Specification Controlled with Limitations: PSPEC 213 FORMING OF ALUMINUM ALLOYS Limitation: 2 AR 96 Specification Controlled: BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS BAPS 188-08 MACHINING OF COMPOSITES BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Limitation: Approval granted toall parts of this specification excluding Fastener Limitation: Encapsulation. BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation to Type II only. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation to Type II only. BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES Limitation: Drilling straight holes and countersinking for Stacks A, B, C, D, and F referenced in GKN Test Report TR101_M0008-16 Rev B-9 and Drilling straight holes GKN AEROSPACE SERVICES, FERRY ROAD 0000104065 Class: F STRUCTURAL SUPPLIER Systems with Limitations: 2101 MRB APPROVAL - MINOR ONLY Page 336 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address EAST COWES, IW GB, PO32 6RA TEL: 1 983 283 562 FAX: 1983 283 499 Classification Learjet Approved Suppliers Scope of Approval Limitation: CRJ 700/900 Limitation: CSeries Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2E MECHANICAL TESTING: PLASTICS, RUBBERS STATIC AND ELASTIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-4D TESTING OF FLAMMABILITY PROPERTIES BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-17 RADIOGRAPHIC INSPECTION BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES Page 337 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 188-08 MACHINING OF COMPOSITES BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS BAPS 260-010 MACHINING, FORMING AND PREPARATION OF NON-METALLIC HONEYCOMB CORE FOR LAY-UP IN SANDWICH COMPONENTS BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... CAPTIVE LABORATORY PPS 01.36 FORMING OF TITANIUM AND TITANIUM ALLOYS PPS 06.13 INSTLLATION FO PERMASWAGE FITTINGS PPS 06.18 CERTIFICATION OF PERMASWAGE TOOLING PPS 10.35 FABRICATION OF 250 F CURE, EPOXY RESIN PRE-IMPREGNATED, FIBRE REINFORCED COMPOSITE PARTS PPS 10.40 REPAIRS TO PRE-IMPREGNATED LAMINATES AND SANDWICH PANELS PPS 20.03 PENETRANT FLAW DETECTION PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS PPS 30.14 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS PPS 31.01 CLEANING OF ALUMINUM ALLOY FOR RESISTANCE WELDING PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.09 CLEANING OF TITANIUM PPS 32.02 MANUAL APPLICATION OF CHEMICAL CONVERSION COATINGS PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 32.09 APPLICATION OF DRY FILM LUBRICANTS (C3, C7 AND C8) PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PPS 34.34 SURFACE FINISHING COMPOUNDS (F33) PPS 37.01 RESISTANCE WELDING ALUMINUM ALLOYS PPS 37.02 RESISTANCE WELDING OF NON-HARDENING STEELS AND ALLOYS, NICKEL ALLOYS AND TITANIUM PPS 37.03 FUSION WELDING OF ALUMINUM AND ALUMINUM ALLOYS PPS 37.04 FUSION WELDING OF FERROUS AND NICKEL ALLOYS PPS 37.05 FUSION WELDING OF TITANIUM PPS 37.06 TESTING AND APPROVAL OF AIRCRAFT WELDERS Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: to manual installation Page 338 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: type 2 manual application GKN AEROSPACE SERVICES, 0000118168 AIRPORT SERVICE ROAD PORTSMOUTH, HA GB, PO3 5PE TEL: 0198 328 3000 FAX: 0198 367 0899 Class: C MANUFACTURER GKN AEROSPACE SERVICES LIMITED, 0000132621 OSBORNE ROAD EAST COWES, IW GB, PO32 6LU TEL: 01983 294101 FAX: 01983 294101 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 188-08 MACHINING OF COMPOSITES PPS 06.13 INSTLLATION FO PERMASWAGE FITTINGS PPS 06.18 CERTIFICATION OF PERMASWAGE TOOLING PPS 20.03 PENETRANT FLAW DETECTION PPS 32.09 APPLICATION OF DRY FILM LUBRICANTS (C3, C7 AND C8) PPS 34.08 EPOXY PRIME PPS 34.34 SURFACE FINISHING COMPOUNDS (F33) Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual rivetting only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 2 pen only BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Limitation: Limitation: Swaging of bearing MS14103-8CE GKN AEROSPACE TRANSPARENCY SYSTEMS, 12122 WESTERN AVE. GARDEN GROVE, CA 0000100876 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 423 Page 339 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval US, 92841-2915 TEL: 714 653 7968 FAX: 714 893 6979 E MAINTENANCE ORGANIZATION GLENAIR INC., 0000101345 1211 AIR WAY GLENDALE, CA US, 91201-2497 TEL: 818-247-6000- FAX: 818 500 9912 Class: C MANUFACTURER GLENAIR UK LTD., 0000107760 40 LOWER OAKHAM WAY MANSFIELD, NT GB, NG18 5BY TEL: 1623 638100 FAX: 1623 638111 Class: C MANUFACTURER GLOBAL AEROSPACE CORPORATION, 0000134225 7075 FIR TREE DRIVE MISSISSAUGA, ON CA, L5S 1J7 TEL: 905 678 6311 FAX: 514 855 5000 Class: E MAINTENANCE ORGANIZATION GLOBAL AIRWORKS, 0000128021 19933 HARRISON AVE. CITY OF INDUSTRY, CA US, 91789 TEL: 909 594 8468 FAX: 909 594 4618 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Class B limited to CRJ for AW230150-09 COCKPIT DOOR SURVEILLANCE SYSTEM GLOBAL BRIDGE INDUSTRY CO. LTD., 0000126676 5/F, BLDG. 15, ASIA INDUSTRIAL PARK BANT SHENZHEN, 190 CN, 518129 TEL: 755 86176661 FAX: 755 86176663 Class: H COMMERCIAL OFF THE SHELF GLOBAL ENGINEERING &, 0000102034 1720 S. 151ST ST. W. GODDARD, KS US, 67052-9449 TEL: 316 729 9232 FAX: 316 729 7927 Class: B EQUIPMENT SUPPLIERS GLOBAL EXPANDED METALS, 0000108618 4455 RIVER GREEN PARKWAY Class: C MANUFACTURER Page 340 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval DULUTH, GA US, 30096 TEL: 770-641-1052 FAX: 770-594-7195 GLOBAL PARTS AERO MANUFACTURING, IN, 907 INDUSTRIAL ROAD AUGUSTA, KS US, 67010-0000 TEL: 316 733 9240 FAX: 316 462 0500 0000119005 Class: A SUBCONTRACTORS GLOBAL PARTS INC., 0000136227 901 INDUSTRIAL ROAD AUGUSTA, KS US, 67010 TEL: 316-247-5451 FAX: 316-462-0500 Class: D DISTRIBUTOR GLOBAL TRADING COMMODITIES LLC., 0000126687 606 OLD BUNCOMBE ROAD TRAVELERS REST, SC US, 29690 TEL: 864 404 3266 FAX: 864 404 3269 Class: D DISTRIBUTOR GLOBE ENGINEERING CO. INC., 0000100828 1539 ST-PAUL S. WICHITA, KS US, 67213-1754 TEL: 316 425 7870 FAX: 316 943 7576 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 174-02 FABRICATION OF PLUMBING LINES LES 1004 PENETRANT INSPECTION LES 1014 WELDING, FUSION FERROUS METALS LES 1015 WELDING FUSION, ALUMINUM ALLOYS LES 1016 HEAT TREATMENT OF STEEL ALLOYS LES 1025 WELDING, SPOT AND SEAM-ALUMINUM AND MAGNESIUM LES 1026 WELDING,SPOT AND SEAM - LOW CARBON STEELS, STAINLESS STEELS, NICKEL ALLOYS LES 1039 SEALING- INTEGRAL FUEL TANKS, PRESSURE CABIN & FIREWALL LES 1051 HEAT TREAT OF ALUMINUM ALLOYS LES 1371 WELDING, FUSION - TITANIUM LES 1387 WELDING, ORBITAL - TITANIUM TUBING LES 1451 LASER CUTTING OF METALS PPS 31.05 SURFACE TREATMENTS OF CORROSION RESISTANT STEELS Page 341 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PPS 37.02 RESISTANCE WELDING OF NON-HARDENING STEELS AND ALLOYS, NICKEL ALLOYS AND TITANIUM PPS 37.04 FUSION WELDING OF FERROUS AND NICKEL ALLOYS PPS 37.12 QUALIFICATION AND CERTIFICATION: RESISTANCE WELDING MACHINES Specification Controlled with Limitations: BAERD-GEN-018-3E WELDING EVALUATION Limitation: Limited to LES 1025 and LES 1026 GLOBE MOTORS, 0000107040 3887 NAPIER FIELD ROAD DOTHAN, AL US, 36303-0905 TEL: 937-229-8501 FAX: 937 461 1017 Class: B EQUIPMENT SUPPLIERS GLORIA MATERIAL TECHNOLOGY CORP., 0000120432 35 HSIN CHUNG ROAD HSIN YING CITY, TWN TW, 730 TEL: 886 6 6520000... FAX: 886 6 6520088 Class: C MANUFACTURER GLYPTAL INC., 0000119371 305 EASTERN AVE. CHELSEA, MA US, 02150-3344 TEL: 617 884 6918 FAX: 617 884 8376 Class: C MANUFACTURER GMT-GUMMI-METALL-TECHNIK GMBH, 0000132837 LIECHTERSMATTEN 5 BUHL, 08 DE, 77815 TEL: 49(0)7223-804... FAX: 49(0)7223-804 Class: B EQUIPMENT SUPPLIERS GOGO BUSINESS AVIATION, 0000104924 105 EDGEVIEW DRIVE, SUITE 300 BROOMFIELD, CO US, 80021 TEL: 303 301 3278 FAX: 303 926 8970 Class: C MANUFACTURER GOGO LLC, Class: 0000132087 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Systems with Limitations: Page 342 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 814 THORNDALE AVE. BENSENVILLE, IL US, 60106 TEL: 630 647 1400 FAX: 630 285 0191 B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Class B supplier for ABS System per STC ST02541CH for CL-600-2C10 &CL-600-2D24. Limitation: Class E supplier for maintenance activities per FAA Repair Station certificate 4ACR423B. GOODFELLOW, 0000118524 225 GOODFELLOW DELSON, QC CA, J5B 1V5 TEL: 450 635 6511 FAX: 450 635 8304 Class: H COMMERCIAL OFF THE SHELF GOODRICH ACTUATION SYSTEMS LTD., 0000107167 STAFFORD ROAD FORDHOUSES WOLVERHAMPTON, WM GB, WV10 7EH TEL: 44 1902 62464... FAX: 441217885817 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: EASA approval UK.145.00860 & FAA Repair Station dual approval LF7Y504J. GOODRICH AEROSPACE CANADA LTD., 0000128861 5415 N. SERVICE ROAD BURLINGTON, ON CA, L7L 5H7 TEL: 905 469-2773 FAX: 905 592 6242 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: In accordance with Transport Canada AMO 180-94 GOODRICH AEROSPACE CANADA LTD., 0000107193 1400 SERVICE ROAD S. W. OAKVILLE, ON CA, L6L 5Y7 TEL: 905-827-7777-... FAX: 905 825 1583 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Canadian AMO approval 03-66 & EASA dual approval EASA.145.7043. GOODRICH AEROSPACE SERVICES PVT LTD, NO. 40 (OLD PLOT NO 181) SURVEY 28 BENGALURU, 10 IN, 560066 TEL: 952 892 4111 FAX: 806 737 0006 Class: B EQUIPMENT SUPPLIERS GOODRICH AEROSTRUCTURES, 850 LAGOON DR. CHULA VISTA, CA US, 91910-2001 0000103375 0000135675 Class: B EQUIPMENT SUPPLIERS D DISTRIBUTOR Page 343 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 619 691 4165 FAX: 619 691 4320 GOODRICH AEROSTRUCTURES CANADA, 0000134609 13100 HENRI-FABRE BLVD. MIRABEL, QC CA, J7N 3C6 TEL: 514-463-6926 FAX: 514 855 5000 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS Specification Controlled with Limitations: BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT Limitation: Wet installation and sealing of fasteners only. GOODRICH CABIN SEATING SYSTEMS, 0000101287 701 MAPLE ST. PESHTIGO, WI US, 54157-1347 TEL: 715 582 8139 FAX: 715 582 2899 Class: B EQUIPMENT SUPPLIERS GOODRICH CABIN SYSTEMS, 0000100971 1643 MAIZE ROAD S. WICHITA, KS US, 67209-1922 TEL: 316 729 2159 FAX: 316 721 3288 Class: Specification Controlled: A SUBCONTRACTORS LES 1232 TESTING, FLAMMABILITY OF NON-METALLIC MATERIALS FOR B EQUIPMENT SUPPLIERS LEARJET AIRCRAFT C MANUFACTURER E MAINTENANCE ORGANIZATION GOODRICH CABIN SYSTEMS, 0000101911 510 PATROL ROAD JEFFERSONVILLE, IN US, 47130 TEL: 812 704 5200 FAX: 812 704 5299 Class: A SUBCONTRACTORS GOODRICH CONTROL SYSTEMS, 0000106564 THE RADLEYS BIRMINGHAM, WM GB, B33 0HZ TEL: 1217885871 FAX: 44 (0)121 7885817 Class: D DISTRIBUTOR GOODRICH CORP., 0000101419 104 OTIS ST. ROME, NY US, 13441-4714 TEL: 315-838-1365 FAX: 315 838 1477 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval AH1R008K & EASA dual approval EASA.145.4647. GOODRICH CORP., 0000100952 4115 CORPORATE CENTER DR. MONROE, NC Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval G84R924X & EASA dual Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 344 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification US, 28110-1313 TEL: 44 1217885865 FAX: 704 290 1940 Scope of Approval approval EASA.145.5617. GOODRICH CORP., 0000100481 1555 CORPORATE WOODS PKWY. UNIONTOWN, OH US, 44685-8799 TEL: 815-226-6198 FAX: 330 374 2137 Class: B EQUIPMENT SUPPLIERS GOODRICH CORP., 0000122704 9920 FREEMAN AVE. SANTA FE SPRINGS, CA US, 90670-3421 TEL: 562 944 4441 FAX: 562 944 7902 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval QBFR289K & EASA dual approval EASA.145.5259. GOODRICH CORP., 0000101333 101 WACO ST. TROY, OH US, 45373-3872 TEL: 937 440 2043 FAX: 937 440 3287 Class: B EQUIPMENT SUPPLIERS GOODRICH CORP., 0000100491 7016 PUEBLO ST. SUITE B WICHITA, KS US, 67209-2937 TEL: 316 943 4280 FAX: 316 943 2848 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval B9DR216N & EASA dual approval EASA.145.4250. GOODRICH CORP., 0000100490 225 STRINGTOWN ROAD UNION, WV US, 24983 TEL: 304 772 3062 FAX: 304 772 4346 Class: B EQUIPMENT SUPPLIERS GOODRICH CORP. WHEEL & BRAKE SERVIC, 7100 INTERMODAL DR., SUITE G LOUISVILLE, KY US, 40258-2882 TEL: 502 995 3353 FAX: 502 995 3167 GOODRICH CORPORATION, 100 PANTON ROAD 0000101320 0000125441 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: In accordance with FAA certificate no Y1GR996L Class: B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 345 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification VERGENNES, VT US, 05491-1008 TEL: 815 226 6198 FAX: 802 877 4114 GOODRICH INTERIORS CABIN ELECTRONIC, 7300 INDUSTRY DRIVE NORTH LITTLE ROCK, AR US, 72117-5314 TEL: 501-801-8192 FAX: 999 999 9999 Scope of Approval E MAINTENANCE ORGANIZATION 0000101981 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER E MAINTENANCE ORGANIZATION GOODRICH LIGHTING SYSTEMS, 0000109121 BERTRAMSTRASSE 8 LIPPSTADT, 08 DE, 59557 TEL: 2941 7676 2802 FAX: 2941 7676 8257 Class: B EQUIPMENT SUPPLIERS GOODYEAR THAILAND PUBLIC CO. LTD, 0000136897 509 PHAHOLYOTHIN ROAD KM36, KLONG 1 KLON PATUMTANI, 37 TH, 12120 TEL: 66 0 2909 8080 FAX: 66 0 2902 2182 Class: B EQUIPMENT SUPPLIERS GOODYEAR TIRE & RUBBER CO., 0000116815 100 BUSINESS CENTER DR. STOCKBRIDGE, GA US, 30281-6383 TEL: (678) 284-6132 FAX: 678 284 6102 Class: C MANUFACTURER GOODYEAR TIRE & RUBBER CO., 0000103589 1901 GOODYEAR BLVD. DANVILLE, VA US, 24541-6607 TEL: 330 796 4805 FAX: 330 796 6535 Class: B EQUIPMENT SUPPLIERS GOULD ALLOYS LTD., 0000107042 CARRWOOD INDUSTRIAL PARK CARRWOOD R CHESTERFIELD, AM GB, S41 9QB TEL: 1246-263300 FAX: 1246 263 311 Class: D DISTRIBUTOR GRACO SUPPLY CO., Class: 0000101502 Learjet Approved Suppliers Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval 111r779B & EASA dual approval EASA.145.6374 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to Goodyear Aircraft Tires and Rubbers Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Page 346 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 2056 S. EDWARDS, SUITE C WICHITA, KS US, 67213-1865 TEL: 316 943 4200 FAX: 316 943 4476 D DISTRIBUTOR GRACO SUPPLY CO., 0000105675 1001 MILLER AVE. FORT WORTH, TX US, 76105-1722 TEL: 817 759 8434 FAX: 817 534 1127 Class: D DISTRIBUTOR GRACO SUPPLY CO., 0000132865 9830 BALL GROUND HIGHWAY BALL GROUND, GA US, 30107 TEL: 770 735 1554 FAX: 770 735 2954 Class: D DISTRIBUTOR GRAHAM MUIR SALES INC., 0000107762 3770B LAIRD ROAD UNIT 7 MISSISSAUGA, ON CA, L5L 0A7 TEL: 905-820-6847-261 FAX: 905 820 6842 Class: D DISTRIBUTOR GRAHAM RESEARCH INC, 0000105230 13305 INDUSTRIAL PARK BLVD PLYMOUTH, MN US, 55441 TEL: 763 537 8438 FAX: 763 537 4569 Class: C MANUFACTURER GRANITIZE AVIATION INTL., 0000120533 ATHCARNE DULEEK, MT IE, 0 TEL: 41 9825313 FAX: 1 84 999 44 Class: D DISTRIBUTOR GRAY FOURNISSEUR DE MATERIAUX, 0000107044 3539 THIMENS ST-LAURENT, QC CA, H4R 1V5 TEL: 514 849 6081 FAX: 514 849 6622 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods Page 347 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval GRAYBAR ELECTRIC COMPANY, 0000127973 1700 CROSS DR. JOLIET, IL US, 60431 TEL: 815 741 4660 FAX: 815 741 4959 Class: H COMMERCIAL OFF THE SHELF GRAYHILL INC., 0000101025 561 HILLGROVE AVE. W. LA GRANGE, IL US, 60525-5997 TEL: 708 482 2115 FAX: 708 354 2820 Class: B EQUIPMENT SUPPLIERS GREEN BELTING INDUSTRIES LTD., 0000107046 381 AMBASSADOR DR. MISSISSAUGA, ON CA, L5T 2J3 TEL: 905 564 6712 FAX: 905 564 6709 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM GREEN COUNTRY AIRCRAFT, INC., 0000133374 1876 N. 106TH E. AVENUE TULSA, OK US, 74116 TEL: 918 932 1769 FAX: 514 855 5000 Class: A SUBCONTRACTORS Specification Controlled: BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS GREENE TWEED & CO., 0000101056 2075 DETWEILER RD. KULPSVILLE, PA US, 19443 TEL: 215 256 9521 FAX: 215 256 0189 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER GREENE TWEED & CO. LTD., 0000108011 MERE WAY,RUDDINGTON FIELDS, BUSSINESS PA NOTTINGHAM, NT GB, NJ11 6JS TEL: 1159-315777 FAX: 1159-315888 Class: C MANUFACTURER GREENFLUID, 0000133435 7 RUE DE LA BRIQUETERIE BP 30104 VILLERS BRETONNEUX, 75 Class: C MANUFACTURER Specification Controlled with Limitations: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: LIMITED TO TRAPNUT INSTALLATION ONLY Page 348 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval FR, 80800 TEL: 03 22 22 14 00 FAX: 03 22 44 19 52 GREENPOINT TECHNOLOGIES, INC., 0000126832 5250 DAKOTA LANE DENTON, TX US, 76207 TEL: 940-382-3933 FAX: 940-382-8316 Class: C MANUFACTURER GREER STEEL COMPANY, 0000130445 624 BOULEVARD ST. DOVER, OH US, 44622 TEL: 330 343 8811 FAX: 330 343 1700 Class: C MANUFACTURER GREER STOP NUT INC., 0000103261 481 MCNALLY DR. NASHVILLE, TN US, 37211-3311 TEL: 215-572-3000 FAX: 615 331 0065 Class: C MANUFACTURER GRETCHEN BELLINGER INC., 0000111054 24 MILL ST. ALBANY, NY US, 12204-2512 TEL: 518 445 2400 FAX: 428 445 1200 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods GROCO SPECIALTY COATINGS CO., 0000108417 10818 C.F. HAWN FREEWAY DALLAS, TX US, 75217 TEL: 972 286 7890 FAX: 972 286 8890 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 616 GROUPE MELOCHE INC., 0000108780 491 DES ERABLES VALLEYFIELD, QC CA, J6T 6G3 TEL: 450 371 4646-149 FAX: 450 371 4957 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Approved for AMS5121 type material Page 349 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-32 SULFURIC ACID ANODIZING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 180-001 ALKALINE CLEANING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 185-01 BARREL AND VIBRATORY FINISHING BAPS 710-007 INTERIOR AIRCRAFT, APPLICATION OF POWDER COATING, DECORATIVE FINISH PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 34.08 EPOXY PRIME Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Equipment, parameter, materials and finish listed in the Groupe Meloche Inc. document no Limitation: 1695 (April 25-2013) ‘’ Laser Marking ‘’ BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Surface preparation, FAY-Faying Surface, AFA-Attachment Fastener, IFF- Interference fit Fastener BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Limited to cotter pin installation only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to manual installation only BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Sealing of fasteners shall only be performed using pre-molded seal caps. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to manual application type 2 only BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Limitation: Type 1, Method A, Penetrant Sensitivity 3, Page 350 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval Developer Form a PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS Limitation: Limited to primer only GRP 1 LP DBA REFLECTIONS UNLIMITED, 2421 FORT WORTH ST. GRAND PRAIRIE, TX US, 75050 TEL: 972 641 7377 FAX: 972 641 8255 GSC FOUNDRIES INC., 0000107602 2738 COMMERCE WAY OGDEN, UT US, 84401-3293 TEL: 801 627 1660 FAX: 801 399 2109 0000126172 Class: A SUBCONTRACTORS Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-17 RADIOGRAPHIC INSPECTION LES 1004 PENETRANT INSPECTION LES 1006 INSPECTION, MAGNETIC PARTICLE LES 1009 INSPECTION, RADIOGRAPHIC LES 1016 HEAT TREATMENT OF STEEL ALLOYS LES 1051 HEAT TREAT OF ALUMINUM ALLOYS LES 1177 WELDING, REPAIR - PREMIUM ALUMINUM CASTINGS LES 1183 WELDING, REPARI - COROSION RESISTANT STEEL CASTINGS LES 1198 QUALIFICATION OF AIRCRAFT CASTINGS LES 1218 INSPECTION, RADIOGRAPHIC - CASTINGS LES 1323 PASSIVATION OF CORROSION RESISTANT STEEL Specification Controlled with Limitations: BAPS 172-34 FUSION WELDING Limitation: . LIMITED TO GROUP IV ALLOYS AND P/N GC426Limitation: 0102 BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Limitation: Limited as defined in RFD 5913 GT MIDWEST, 0000100826 2202 WEST ST. S. WICHITA, KS US, 67213-1114 Class: A SUBCONTRACTORS D DISTRIBUTOR Page 351 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 316-494-7848 FAX: 316-943-4800 GUILLEVIN INTL. INC., 0000108558 3458 GRIFFITH ST-LAURENT, QC CA, H4T 1A7 TEL: 514-340-1700 FAX: 514-340-1221 Class: H COMMERCIAL OFF THE SHELF GULFSTREAM - CALIFORNIA, INC., 0000124916 1501 AVIATION BLVD. LINCOLN, CA US, 95648-9387 TEL: 916 645 8961 FAX: 916 645 1547 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Limitation: FAA Repair Station Approval # 2GDR216B dual approval with EASA # EASA.145.6201 GULFSTREAM AEROSPACE, 0000128794 6210 DENTON DR. DALLAS, TX US, 75235 TEL: 800 810 4853 FAX: 214 350 5560 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS GULFSTREAM AEROSPACE CORP., 0000101353 7440 AVIATION PLACE DALLAS, TX US, 75235 TEL: 800 810 4853-... FAX: 214 350 5560 Class: B EQUIPMENT SUPPLIERS D DISTRIBUTOR E MAINTENANCE ORGANIZATION GULFSTREAM AEROSPACE SERVICES/, 0000100501 W. 6365 DISCOVERY DR. APPLETON, WI US, 54914-9190 TEL: 920-996-3610 FAX: 920-735-7198 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: In accordance with FAA repair station approval no. G1FR100Y. H. A. GUDEN CO. INC., 0000105842 99 RAYNOR AVE. RONKONKOMA, NY US, 11779-6634 TEL: 631 737 2900 FAX: 631 737 2933 Class: C MANUFACTURER H.B. FULLER, 0000108456 2727 KINNEY N.W. GRAND RAPIDS, MI Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Ref: EMCM #710 Page 352 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 49544 TEL: 616 453 8271 FAX: 616 453 2403 H.C. STARCK GMBH, 0000130862 LM SHLEEKE 78-91 GOSLAR, 03 DE, 38642 TEL: 495321 7510 FAX: 495321 751 6659 Class: C MANUFACTURER H.C. STARCK INC., 0000107139 21801 TUNGSTEN ROAD EUCLID, OH US, 44117 TEL: 216 692 4439 FAX: 216 692 0029 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS C MANUFACTURER H.G. AEROSPACE ENGINEERING LTD., 0000125469 COLLETT CLOSE ST-LEONARDS-ON-SEA, SE GB, TN38 9QS TEL: 01424 853444 FAX: 01424 851690 Class: C MANUFACTURER H.R. SMITH LTD., 0000107767 ST. COURT, KINGSLAND LEOMINSTER, HT GB, HR6 9QA TEL: 011441568 708744 FAX: 1568 708713 Class: C MANUFACTURER H.S. MARSTON AEROSPACE LTD., 0000107771 WOBASTON ROAD FORDHOUSES WOLVERHAMPTON, WM GB, WV10 6QI TEL: 1902 572777 FAX: 1902 572888 Class: C MANUFACTURER HAAS GROUP CANADA INC., 0000137570 2000, 32ND AVENUE LACHINE, QC CA, H8T 3H7 TEL: 514-403-5000 FAX: 514-403-5041 Class: D DISTRIBUTOR HAAS GROUP INTERNATIONAL SCM IRELAN, UNIT 4A, WESTERN BUSINESS PARK 0000122858 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: See EMCM-001 Class: D DISTRIBUTOR Page 353 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval SHANNON, CL IE, 0 TEL: 61 719099 FAX: 61 719095 HAFELE AMERICA CO., 0000116183 19641 HARBORGATE WAY TORRANCE, CA US, 90501-1326 TEL: 310-525-2205 FAX: 800 325 6197 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods HAFELE CANADA INC., 0000110545 5323 JOHN LUCAS DR. BURLINGTON, ON CA, L7L 6A8 TEL: 905 336 6608 FAX: 905 319 4445 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods HAIG LIGHTING INC., 0000128325 7945 TRANS-CANADA ST-LAURENT, QC CA, H4S 1L3 TEL: 514 336 2085 FAX: 514 336 2088 Class: H COMMERCIAL OFF THE SHELF HALETHORPE EXTRUSIONS INC., 0000120385 1954 HALETHORPE FARMS, SUITE 800 BALTIMORE, MD US, 21227-4562 TEL: 410 737 6980 FAX: 410 737 6986 Class: C MANUFACTURER HAMILTON SUNDSTRAND, 0000108603 HORSTERWEG 7 MAASTRICHT-AACHEN AIRPORT, 06 NL, 6199 AC TEL: 43 35 88 868 FAX: 31 0 43 358 87 88 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: EASA approval NL.145.1160 & FAA Repair Station dual approval CW5Y794M. HAMILTON SUNDSTRAND -, 0000109007 18 BEDOK S. ROAD SINGAPORE, SG SG, 469276 TEL: 65805958 FAX: 442 3452 Class: B EQUIPMENT SUPPLIERS HAMILTON SUNDSTRAND - ELECTRICAL, 0000129992 Class: Systems with Limitations: Page 354 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 4747 HARRISON AVE., DOCK 2 ROCKFORD, IL US, 61108 TEL: 815-226-6198 FAX: 815 226 2624 B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: 1-FAA Repair Station approval JW2R941K& EASA dual approval EASA.145.4908. Limitation: 2-CRJ 700/900 & BD700 (GX/GX5000) HAMILTON SUNDSTRAND CORP., 0000108133 1007 E. UNIVERSITY DR. PHOENIX, AZ US, 85034-6513 TEL: 602 462 2636 FAX: 860 660 6170 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION HAMILTON SUNDSTRAND CORP., 0000108135 FELICIA INDUSTRIAL PARK ROUTE 538 SANTA ISABELA, PR PR, 00757 TEL: 787 845 1068 FAX: 815 226 2624 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval PU7R1470 & EASA dual approval EASA.145.5594. HAMILTON SUNDSTRAND CORP., 0000104913 FELICIA INDUSTRIAL PARK ST. B LOT 2 SANTA ISABELA, PR PR, 00757 TEL: 787 439 2404 FAX: 860 660 8383 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval PU7R1470 & EASA dual approval EASA.145.5594. HAMILTON SUNDSTRAND CORP., 0000101351 1 HAMILTON ROAD WINDSOR LOCKS, CT US, 06096-1010 TEL: 860 654 3331 FAX: 860-353-4828 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION HAMILTON SUNDSTRAND CORP., 0000116651 3601 FLAMINGO ROAD MIRAMAR, FL US, 33027-2936 TEL: 954 538 8946 FAX: 815 226 6826 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval KA4R303M & EASA dual approval EASA145.4295. HAMILTON SUNDSTRAND CORP., 0000100699 4400 RUFFIN ROAD SAN DIEGO, CA US, 92123-1606 TEL: 815-226-6198 FAX: 860 660 7983 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval LI3R658L & EASA dual approval EASA.145.4903. Limitation: Page 355 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval Limitation: Civil Aviation Authority of China approval F00100107 Limitation: Civil Aviation Authority of Singapore approval AWI/199 HAMILTON SUNDSTRAND CORP. - ACTUATI, 4747 HARRISON AVE., DOCK 2 ROCKFORD, IL US, 61108 TEL: 815 226 6720 FAX: 815 226 2624 0000102076 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval JW2R941K& EASA dual approval EASA.145.4908. HAMILTON SUNDSTRAND WROCLAW SP.Z.O., UL. BIERUTOWSKA 65-67 WROCLAW, 47 PL, 51-317 TEL: 48 723 997 64 FAX: 514 855 5000 0000133279 Class: B EQUIPMENT SUPPLIERS HAMLIN ELECTRONICS LP, 0000106048 612 LAKE ST. E. LAKE MILLS, WI US, 53551-1737 TEL: 920 648 3000 FAX: 920 648 3001 Class: C MANUFACTURER HAMMOND ROTO FINISH CO. INC., 0000108411 1600 DOUGLAS AVE. KALAMAZOO, MI US, 49007-1630 TEL: 269 345 7151 FAX: 269 345 1710 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Roto-Brite L-161 to BAMS 562-001 HANDYTUBE CORPORATION, 0000119618 124 VEPCO BLVD. CAMDEN, DE US, 19934 TEL: 302-697-9521 FAX: 302-697-7405 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to : Limitation: 321 Alloy MIL-T-8808 Limitation: 304 Alloy MIL-T-6845 HANGSTERFER'S LABS. INC., 175 OGDEN ROAD MANTUA, NJ US, 08051-1615 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM 0000108498 Page 356 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 856-468-0216-179 FAX: 856 468 0200 HANNA RUBBER, 0000108387 1511 BALTIMORE KANSAS CITY, MO US, 64108-1301 TEL: 816 221 9600 FAX: 816 421 0583 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM HAPPICH GMBH, 0000123438 LISE-MEITNER-STR. 14 WUPPERTAL, 05 DE, 42119 TEL: 49 202 8703 183 FAX: 49 202 8703 16 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to the following parts & Tooling ONLY: Limitation: PARTS Limitation: Lower Section:3000009 Limitation: Nut:3000012 Limitation: upper section: 300A392 Limitation: TOOLING Limitation: socket wrench: 3630001 Limitation: Wrench: 3630000 Limitation: Wrench: 3630142 HARBIN AIRCRAFT INDUSTRY (GROUP) CO, 0000128155 NO. 15 YOUXIE ST., PINGFANG DISTRICT HARBIN, 090 CN, 150066 TEL: 451 8658 2790 FAX: 451 8650 1070 Class: A SUBCONTRACTORS HARBOUR INDUSTRIES INC., 0000107060 4744 SHELBURNE SHELBURNE, VT US, 05482-6695 TEL: 802 985 3311 FAX: 802 985 9534 Class: C MANUFACTURER HARCO LABORATORIES INC., 0000127560 186 CEDAR ST. BRANFORD, CT US, 06405-6011 TEL: 203-483-3711 FAX: 203-483-3701 Class: B EQUIPMENT SUPPLIERS HARDWARE & METAL SPECIALTIES, 550 E. 19TH ST. Class: D DISTRIBUTOR 0000101932 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 357 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TUCSON, AZ US, 85701-3232 TEL: 520 623 8631 FAX: 520 623 8634 HARPER ENGINEERING CO., 0000103328 700 S.W. 7TH ST. RENTON, WA US, 98057-2919 TEL: 206-255-0414 FAX: 425 228 0889 HARRINGTON INDUSTRIAL PLASTICS, INC, 4141 E. TENNESSEE, SUITE 137 TUCSON, AZ US, 85714-2146 TEL: 520 745 8433 FAX: 520 745 6510 Class: C MANUFACTURER 0000101916 Class: H COMMERCIAL OFF THE SHELF HARTWELL - DZUS S.A. DE C.V., 0000125925 PROLONQACION AV. JUAREZ NO. 999 TECATE, BC MX, 21440 TEL: 665 654 0493 FAX: 665 654 6888 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to product called in Bombardier Aerospace standard (B Specification) HARTWELL CORP., 0000100831 900 S. RICHFIELD ROAD PLACENTIA, CA US, 92870-6788 TEL: 714-993-4200-758 FAX: 714-524-0273 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS HARTWELL CORP., 0000100011 9810 W. 6TH RANCHO CUCAMONGA, CA US, 91730-5714 TEL: 714-993-4200 FAX: 714-993-4419 Class: C MANUFACTURER HARTZELL ENGINE TECHNOLOGIES, 0000107114 2900 SELMA HIGHWAY MONTGOMERY, AL US, 36108 TEL: 334 227 8306 FAX: 334 386 5450 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Classification B – Equipment supplier for the parts under your design authority Limitation: Classification E – Service Provider for the maintenance activities on components intended for Limitation: the CL415 program per FAA Repair Station Page 358 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval certificate number 1HZR769B and EASA Limitation: certificate number EASA.145.4418. HASCO, 0000102078 900 SOUTH RICHFIELD ROAD PLACENTIA, CA US, 92870-6788 TEL: 714-993-4200-763 FAX: 714 579 4416 Class: D DISTRIBUTOR HAWKER GMBH, 0000102705 DIECKSTRASSE 42 HAGEN, 05 DE, 58089 TEL: 49 1714 411981 FAX: 2331 372 103 Class: C MANUFACTURER HAYDON KERK MOTION SOLUTIONS, INC., 0000101262 1500 MERIDEN ROAD WATERBURY, CT US, 06705-3982 TEL: 203 756-7441-293 FAX: 203 756 8724 Class: C MANUFACTURER HAYNES INTERNATIONAL. INC., 0000108192 1020 W. PARK AVE. KOKOMO, IN US, 46901-6330 TEL: 800-354-0806 FAX: 765-456-6545 Class: C MANUFACTURER D DISTRIBUTOR HAYNES INTL., 0000108439 3786 2ND ST. ARCADIA, LA US, 71001-5301 TEL: 318 263 2002 FAX: 999 999 9999 Class: C MANUFACTURER HBD / THERMOID INC, 0000100972 201 ALLEN ST. N. CHANUTE, KS US, 66720-1428 TEL: 620 431 9100 FAX: 620 431 9105 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER HBL POWER SYSTEMS LTD., Class: 0000123980 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 359 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification LALGADI MALAKPET, SHAMEERPET MANDAL, ROA HYDERABAD, 01 IN, 500078 TEL: 8418 244640 FAX: 8418 244574 C MANUFACTURER HBL YARDNEY LLC, 0000126161 2000 S. COUNTY TRAIL EAST GREENWICH, RI US, 02818 TEL: 860 599 1100 FAX: 860 599-3903 Class: B EQUIPMENT SUPPLIERS HC PACIFIC, 0000102437 5536 ONTARIO MILLS PARKWAY ONTARIO, CA US, 91764 TEL: 682-308-0078 FAX: 817 652 0162 Class: D DISTRIBUTOR HEADS UP TECHNOLOGIES, INC, 0000101906 2033 CHENNAULT, SUITE 100 CARROLLTON, TX US, 75006-5119 TEL: 972-759-5054 FAX: 972 980 4843 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION HEARTLAND PRECISION FASTENERS, 0000107069 301 PRAIRIE VILLAGE DR. NEW CENTURY, KS US, 66031-1121 TEL: 913 829 4447 FAX: 913 829 7282 Class: C MANUFACTURER HEATCON COMPOSITE SYSTEMS, 0000102321 600 ANDOVER PARK E. SEATTLE, WA US, 98188-7610 TEL: 206 575 1333 FAX: 206 575 0856 Class: C MANUFACTURER HEATH TECNA INC., 0000107765 3225 WOBURN ST. BELLINGHAM, WA US, 98226-5656 TEL: 360 738 2005-... FAX: 360 752 3054 Class: A SUBCONTRACTORS Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 360 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval HEICO AEROSPACE, 0000124855 3000 TAFT ST. HOLLYWOOD, FL US, 33021 TEL: 954 987 4000 FAX: 954-987-7585 Class: D DISTRIBUTOR HEICO AEROSPACE, 0000130427 7875 NW 64TH ST. MIAMI, FL US, 33166 TEL: 305 463 0455 FAX: 305 463 9339 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval No. NWQR356K & EASA dual approval No. EASA.145.4705 Limitation: Thailand Approval No. 423/2552 Limitation: Republic of Indonesia Approval No. 145F-833 HEINRICH KIPP WERK KG, 0000135730 HEUBERGSTRASSE 2 SULZ AM NECKAR, 08 DE, 72172 TEL: 49 7454 7930 FAX: 49 7454 7933 Class: H COMMERCIAL OFF THE SHELF HEIPLEX INC., 0000107070 11350 54TH AVE. MONTREAL, QC CA, H1E 2J1 TEL: 514 648 4961 FAX: 514 643 4101 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS HELICAL WIRE INC., 0000125672 26 CASH DR. CARSON CITY, NV US, 89706-7789 TEL: 775 246 5333 FAX: 775 246 5388 Class: C MANUFACTURER HELLERMANN TYTON, 0000108981 7930 N. FAULKNER ROAD MILWAUKEE, WI US, 53224 TEL: (414) 355-1130 FAX: (414) 355-7341 Class: C MANUFACTURER HELLERMANN TYTON UK, 0000109979 WILLIAM PRANCE ROAD, PLYMOUTH INTERNATIO Class: C MANUFACTURER Page 361 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PLYMOUTH, AT GB, PL6 5WR TEL: 01752 701261 FAX: 01752 790058 HENKEL CANADA CORP., 0000108504 2515 MEADOWPINE BLVD. MISSISSAUGA, ON CA, L5N 7P2 TEL: 905 814 6511-... FAX: 905 814 5727 Class: D DISTRIBUTOR HENKEL CAPITAL SA DE CV, 0000130756 BLVD. MAGNOCENTRO 8 PISO 2 HUIXQUILUCAN, MEX MX, 52760 TEL: 33 00 36 56-3643 FAX: 33 00 36 56 Class: D DISTRIBUTOR HENKEL CORP., 0000134885 421 LONDON ROAD DELAWARE, OH US, 43015 TEL: 740 363 1351 FAX: 999 999 9999 Class: C MANUFACTURER HENKEL CORP., 0000120568 23343 SHERWOOD AVE. WARREN, MI US, 48091-5362 TEL: 248-583-9300 FAX: 248-589-4838 Class: C MANUFACTURER HENKEL CORP., 0000100990 2850 WILLOW PASS ROAD BAY POINT, CA US, 94565-3237 TEL: 925 458 8217 FAX: 925-458-8298 Class: C MANUFACTURER HENKEL CORPORATION, 0000134153 167 BATCHELDER ROAD SEABROOK, NH US, 03874 TEL: 603 474 5541 FAX: 603 474 5545 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: approval limited to product EMCM -Alodine 1000 RTU , Alodine 1132 , Limitation: Alodine 1200S RTU , TURCO METAL-GLO No. 6 - Page 362 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification HENKEL CORPORATION, 0000102783 1 HENKEL WAY ROCKY HILL, CT US, 06067 TEL: 860-571-5100 FAX: 860-571-5465 Class: C MANUFACTURER HENKEL ELECTRONIC MATERIALS LLC, 0000102398 20021 SUSANA ROAD RANCHO DOMINGUEZ, CA US, 90221 TEL: 310-761-1307 FAX: 714-368-2265 Class: C MANUFACTURER HENKEL ELECTRONIC MATERIALS, LLC, 0000130991 485 CEDAR SPRINGS ROAD SALISBURY, NC US, 28147 TEL: 704 647 3500 FAX: 704 647 3537 Class: C MANUFACTURER HENKEL NEDERLAND B.V. - HENKEL AERO, 0000118869 BRUGWAL 11 NIEUWEGEIN, 01 NL, 3432 NZ TEL: 00 31 306 073... FAX: 00 31 306 054 Class: C MANUFACTURER HENKEL PUERTO RICO INC, 0000134908 QUILINCHINI AVENUE 9 SABANA GRANDE, PR PR, 00637 TEL: 1-787-873-6500 FAX: 1-787-873-2619 Class: C MANUFACTURER HENKEL TECHNOLOGIES, 0000108358 32100 STEPHENSON HWY. MADISON HEIGHTS, MI US, 48071-5514 TEL: 800 521 1355 FAX: 248-583-2976 Class: C MANUFACTURER HENTZEN AEROSPACE, 307 ECHELON ROAD GREENVILLE, SC US, 29605-5234 Class: C MANUFACTURER 0000102266 Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 363 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 514-502-0799 FAX: 864-299-2820 HENTZEN COATINGS INC., 0000126207 6937 W. MILL ROAD MILWAUKEE, WI US, 53218-1225 TEL: 414 465 4221 FAX: 414 353 0286 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS HERBER AIRCRAFT SERVICE INC., 0000101307 1401 E. FRANKLIN AVE. EL SEGUNDO, CA US, 90245-4307 TEL: 310 414 6374 FAX: 310 322 1875 Class: C MANUFACTURER D DISTRIBUTOR E MAINTENANCE ORGANIZATION Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval GS3R538L & EASA dual approval EASA.145.4526. HERCULITE PRODUCTS INC., 0000126969 105 E. SINKING SPRINGS LANE EMIGSVILLE, PA US, 17318 TEL: 717 764 1192 FAX: 717 764 5211 Class: C MANUFACTURER H COMMERCIAL OFF THE SHELF HEROUX DEVTEK INC., 0000101566 755 THURBER ST. LONGUEUIL, QC CA, J4H 3N2 TEL: 450 679 5450 FAX: 450 679 4554 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION HETTICH CANADA LP, 0000135040 120 BARR VILLE ST. LAURENT, QC CA, H4T 1Y4 TEL: 514 333 3952 FAX: 514 333 3005 Class: H COMMERCIAL OFF THE SHELF HEXCEL COMPOSITES, 0000109981 DUXFORD CAMBRIDGESHIRE, CA GB, CB2 4QD TEL: 888 849 7908 FAX: 925 828 4740 Class: A SUBCONTRACTORS C MANUFACTURER HEXCEL CORP., 0000109764 1913 N. KING ST. SEGUIN, TX Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Canadian AMO approval 06-73 & EASA dual approval EASA.145.7034. Page 364 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 78155-2115 TEL: 830 379 1580 FAX: 830 379 3814 HEXCEL CORP., 0000103285 15062 STEEL ROAD BURLINGTON, WA US, 98233 TEL: 360 757 7212-... FAX: 360 757 7214 Class: A SUBCONTRACTORS HEXCEL CORP., 0000107764 6700 W. 5400 S. SALT LAKE CITY, UT US, 84118-7678 TEL: 801 508 8000 FAX: 801 508 8517 Class: C MANUFACTURER HEXCEL CORP., 0000100155 1214 HWY. 84 W. CASA GRANDE, AZ US, 85122 TEL: 888 611 4038- FAX: 520 421 9794 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled with Limitations: PPS 10.24 PREPARATION OF HONEYCOMB CORES FOR LAY-UP IN SANDWICH PANEL ASSEMBLIES Limitation: limited to machining, chamfering and cleaning of core. Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: LIMITED DESIGN IN-HOUSE; NO DETAIL DRAWINGS ON CANADAIR CONTRACTS (USING CANADAIR SOCD'S) Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT HEXCEL CORP., 0000100987 11711 DUBLIN BLVD. DUBLIN, CA US, 94568-2898 TEL: 520 836 8761- FAX: 925 828 1509 HEXCEL POTTSVILLE, ST-CLAIR IND. PA, 172 INDUSTRIAL PARK ROAD ST. CLAIR, PA US, 17970 TEL: 888 639 9321 FAX: 999 999 9999 HEXCEL REINFORCEMENTS, ZI LES NAPPES 0000108858 Class: C MANUFACTURER 0000109671 Class: C MANUFACTURER Class: C MANUFACTURER Page 365 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval LES AVENIERES, 69 FR, 38630 TEL: 4720 53939 FAX: 4720 20759 HEXCEL S.A., 0000110158 PARC INDUSTRIEL WELKENRAEDT, 01 BE, 4840 TEL: 32 87 307 458 FAX: 32 87 307 407 Class: C MANUFACTURER Specification Controlled: PPS 10.24 PREPARATION OF HONEYCOMB CORES FOR LAY-UP IN SANDWICH PANEL ASSEMBLIES PSPEC 615 ADVANCED COMPOSITES HEXCEL STRUCTURES, 0000100154 19819 84TH AVE. S. KENT, WA US, 98032-1233 TEL: 253-395-7500 FAX: 253 395 4780 Class: A SUBCONTRACTORS D DISTRIBUTOR Specification Controlled: PPS 02.64 INSTALLATION OF POTTING TYPE SANDWICH PANEL FASTENERS PPS 10.21 CERTIFICATION OF AUTOCLAVES PPS 10.22 PREPARATION OF MOLDS PPS 10.23 STORAGE, HANDLING AND PREPARATION OF PRE-IMPREGNATED MATERIALS PPS 10.24 PREPARATION OF HONEYCOMB CORES FOR LAY-UP IN SANDWICH PANEL ASSEMBLIES PPS 10.25 STORAGE & APPLICATION OF FILM ADHESIVES USED IN COMPOSITE ASSEMBLIES PPS 10.35 FABRICATION OF 250 F CURE, EPOXY RESIN PRE-IMPREGNATED, FIBRE REINFORCED COMPOSITE PARTS PPS 10.38 REPAIR OF DECORATIVE FILM COVERED COMPONENTS PPS 10.39 MACHINING OF FIBRE REINFORCED COMPOSITE PARTS PPS 10.40 REPAIRS TO PRE-IMPREGNATED LAMINATES AND SANDWICH PANELS PPS 10.48 FABRICATION OF 280F CURE, PHENOLIC RESIN PRE-IMPREGNATED, FIBRE REINFORCED COMPOSITE PARTS PPS 10.51 CERTIFICATION OF OVENS PPS 20.03 PENETRANT FLAW DETECTION PPS 20.06 ULTRASONIC INSPECTION OF FIBRE REINFORCED COMPOSITE PARTS - CERTIFIED PERSONNEL REQUIRED PPS 21.20 MIXING AND HANDLING TWO PART SEALANTS PPS 21.21 GENERAL SEALING PRACTICES PPS 25.08 EC-1099 ADHESIVE PPS 25.14 GENERAL ELECTRIC PSA529/SRC-18 SILICONE BASE ADHESIVE PPS 25.52 EC-2216 B/A GREY ADHESIVE PPS 31.02 CLEANING PROCESSES OF ALUMINUM Page 366 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PPS 34.19 APPLICATION OF F14 ANTI-STATIC COATING PPS 34.34 SURFACE FINISHING COMPOUNDS (F33) PPS 34.41 APPLICATION OF EPOXY-POLYAMIDE ENAMEL (F22) PPS 39.06 INSTALLATION OF DHC-8 AIRFRAME DE-ICING BOOTS QAMTR 034 NON DESTRUCTIVE TESTING REQUIREMENT FOR DASH-8 LEADING EDGES WITH COLD BOUNDED ICER BOOTS HEXION SPECIALITY CHEMICALS GMBH GR, VARZINER STARSSE 49 DUISBURG, 05 DE, 47138 TEL: 203-4296550 FAX: 0203 4296 221 0000126871 Class: C MANUFACTURER HI-SHEAR CORP., 0000103550 2600 SKYPARK DR. TORRANCE, CA US, 90505-5314 TEL: 310 784 4014 FAX: 310 784 4186 Class: C MANUFACTURER D DISTRIBUTOR HI-TEMP INSULATION INC., 0000101101 4700 CALLE ALTO ROAD CAMARILLO, CA US, 93012-8537 TEL: 805 484 2774 FAX: 805 484 7551 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER HICKOK INC., 0000100940 10514 DUPONT AVE. CLEVELAND, OH US, 44108-1399 TEL: 216-541-8060 FAX: 216 761 9879 Class: B EQUIPMENT SUPPLIERS HICKOK INC., 0000101401 1714-16 CARROLLTON AVE. GREENWOOD, MS US, 38930-5818 TEL: 216 541 8060 FAX: 662 455 2446 Class: C MANUFACTURER HIGGINSON EQUIPMENT SALES, Class: 0000107766 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 367 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 1175 CORPORATE DR., UNIT 1 BURLINGTON, ON CA, L7L 5V5 TEL: 905 335 2211 FAX: 905 335 8756 D DISTRIBUTOR HIGH TECH ENGINEERING LTD., 0000126876 3 MAYER WAY, HOUTHTON REGIS DUNSTABLE, BE GB, LU5 5DE TEL: 01582 662277 FAX: 01582 472235 Class: A SUBCONTRACTORS HIGH TECH FINISHING, 0000102702 6201 ROYALTON HOUSTON, TX US, 77081-2926 TEL: 800-949-0124 FAX: 713-668-5141 Class: A SUBCONTRACTORS HILLER INC., 0000101862 630 N. WASHINGTON WICHITA, KS US, 67214-3840 TEL: 316 264 8022 FAX: 316 264 8148 Class: A SUBCONTRACTORS HILTAP FITTINGS LTD., 0000102674 2750 22ND ST. N. E., SUITE 107 CALGARY, AB CA, T2E 7L9 TEL: 403 250 2986 FAX: 403 291 3592 Class: C MANUFACTURER HIREL CONNECTORS INC., 0000103319 760 W. WHARTON DR. CLAREMONT, CA US, 91711-4800 TEL: 909-626-1820-225 FAX: 909 399 0626 Class: C MANUFACTURER HITACHI METALS -YASUGI WORKS, 0000108424 2-2107 YASUGI CHO YASUGI CITY, 23 JP, 6929999 TEL: 3 5765 4367 FAX: 3 5765 8317 Class: C MANUFACTURER Scope of Approval Specification Controlled: LES 1232 TESTING, FLAMMABILITY OF NON-METALLIC MATERIALS FOR LEARJET AIRCRAFT Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 368 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification HITCO CARBON COMPOSITES INC., 0000108319 1600 135TH ST. W. GARDENA, CA US, 90249-2506 TEL: 800-421-5444 FAX: 310-970-5648 Class: C MANUFACTURER HIXSON METAL FINISHING, INC., 0000107609 829 PRODUCTION PLACE NEWPORT BEACH, CA US, 92663-2809 TEL: 949-645-4800-... FAX: 949 650 9043 Class: A SUBCONTRACTORS HM DUNN, 0000131412 3301 HOUSE ANDERSON ROAD EULESS, TX US, 76040 TEL: 817 283 3722 FAX: 817 283 3722 Class: A SUBCONTRACTORS HM DUNN AEROSPACE, 0000100873 4201 S. 119TH ST. W. WICHITA, KS US, 67215-9100 TEL: 316 522 5426 FAX: 316 522 3672 Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-040 AQUEOUS DEGREASING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limitation: Manual Application ONLY Page 369 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Touch-up Only: Limitation: 1-Alodine 1132 Prep Pen application to surfaces less than 4 sqin total coating Limitation: (no more than 1" width) Limitation: 2- The user has to have monthly records for coating weight per Henkel Technical Limitation: Process Bulletin, for each application. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Touch-up only: Limitation: 1- To be used per manufacturer instructions for class 3application (light and moderate Limitation: coating weight) Limitation: 2- The user has to have monthly records for coating weight Limitation: 3- The user has to have preparation (cleaning) before Alodine 1132 application. BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: ''Dry Ice & Liquid Nitrogen'' Methods only HMS, 0000131637 A.N. ZORLU BULVARI NO 7, MOSB MANISA, 45 TR, 45030 TEL: 90 236 2901500 FAX: 90 236 2901505 Class: A SUBCONTRACTORS HO-HO-KUS INC., 0000108542 189-201 LYON ST. PATERSON, NJ US, 07524-2523 TEL: 973 278 2274 FAX: 973 278 4805 Class: C MANUFACTURER HOFFMAN ENGINEERING LLC., 0000103856 8 RIVERBEND DR. STAMFORD, CT US, 06907-2623 TEL: 203 425 900 FAX: 203-425-8910 Class: C MANUFACTURER HOLBOURNE INDUSTRIAL PLASTICS LIMIT, 0000132843 Specification Controlled: BAPS 160-36 ELECTROLYTIC POLISHING BAPS 180-001 ALKALINE CLEANING Class: Page 370 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification UNITS E3 & E4, PHOENIX WORKS AIDRIDGE, WM GB, WS9 8BG TEL: 01922 745 080 FAX: 01922 745 080 C MANUFACTURER HOLLINGSEAD INTERNATIONAL, LLC, 0000104791 21583 BALTIMORE AVE. GEORGETOWN, DE US, 19947 TEL: 302-253-6470 FAX: 302 855 9196 Class: B EQUIPMENT SUPPLIERS HOLLYGATE AIRCRAFT COMPONENTS LTD., ALBERT ST., OFF CHESTERGATE STOCKPORT, CH GB, SK3 0BA TEL: 01614 299960 FAX: 01614 774079 Class: A SUBCONTRACTORS 0000128704 Learjet Approved Suppliers Scope of Approval HOLMBERG GMBH & CO. KG, 0000129349 OHLAUER STR. 5 - 11 BERLIN, 11 DE, 10999 TEL: 030 61780-172 FAX: 030 61780-254 Class: B EQUIPMENT SUPPLIERS HONEYWELL, 0000100601 BOURNEMOUTH INTERNATION AIRPORT CHRISTCHURCH, DO GB, BH23 6EW TEL: 4412025818 FAX: 1202581919 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: EASA approval UK.145.00870 & FAA Repair Station dual approval NOUY522K. HONEYWELL, 0000108086 800 AEROSPACE BOULEVARD SLEMON PARK, PE CA, C0B 2A0 TEL: 902-436-1760 FAX: 902-436-0570 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Repair station in accordance to TCCA AMO 20-91 and EASA 145.7012 HONEYWELL AEROSPACE, 0000106715 1300 W. WARNER ROAD TEMPE, AZ US, 85284-2822 TEL: 514 744 7466 FAX: 514 748 4420 Class: B EQUIPMENT SUPPLIERS Page 371 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval HONEYWELL AEROSPACE, 0000108785 23 RUE DU 19 MARS 1962 GENNEVILLIERS, 92 FR, 92230 TEL: 1408 05800 FAX: 1479 10479 Class: E MAINTENANCE ORGANIZATION HONEYWELL AEROSPACE YEOVIL, 0000101580 BUNFORD LANE YEOVIL, SO GB, BA20 2YD TEL: 1935 475181 FAX: 1935 427600 Class: C MANUFACTURER HONEYWELL CONTROL SYSTEMS LTD., 0000108019 UK DISTRIBUTION CENTRE MICROSWITCH MOTHERWELL, SC GB, ML1 5SB TEL: 1698 732100 FAX: 1698 731618 Class: C MANUFACTURER HONEYWELL INC., 0000101410 8840 EVERGREEN BLVD. COON RAPIDS, MN US, 55433-6040 TEL: 787-658-2301 FAX: 763-957-3037 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval KE2R949K & EASA dual approval EASA.145.4538. HONEYWELL INC., 0000107731 375 LAKE ST. N. BOYNE CITY, MI US, 49712-1101 TEL: 815-266-3381 FAX: 815-233-2808 Class: B EQUIPMENT SUPPLIERS HONEYWELL INC., 0000100308 4150 LIND AVE. S. W. RENTON, WA US, 98057-4973 TEL: 602-365-2903 FAX: 877 441 5032 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval RN3R821L & EASA dual approval EASA.145.4534. HONEYWELL INC., 0000101356 7227 W. HARRY ST. WICHITA, KS US, 67209-2944 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval LV2R992K & EASA dual approval EASA.145.4533. Page 372 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 602-684-8940 FAX: 602-822-7710 HONEYWELL INTERNATIONAL INC., 0000101904 8323 LINDBERGH CT. SARASOTA, FL US, 34243-2724 TEL: 941 360 6275 FAX: 941 355 9241 Class: E MAINTENANCE ORGANIZATION HONEYWELL INTERNATIONAL INC., 0000100031 15001 N.E. 36TH ST. REDMOND, WA US, 98052-5317 TEL: 913-712-2175 FAX: 913-712-1335 Class: B EQUIPMENT SUPPLIERS HONEYWELL INTERNATIONAL INC., 0000102557 1 CLIFF GARRETT DR. ANNISTON, AL US, 36201 TEL: 514 422 3648 FAX: 514 748 4420 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / Limitation: Limitation In Safety Agency No.145.4127 Limitation: In accordance No.ZX4R716M Limitation: In accordance No.F00100122 REMARKS accordance with European Aviation with FAA Repair Station Approval with China Civil Aviation HONEYWELL INTERNATIONAL INC., 0000100304 21111 N. 19TH AVE. PHOENIX, AZ US, 85027-2708 TEL: 787-658-1944 FAX: 602 822 7720 Class: B EQUIPMENT SUPPLIERS D DISTRIBUTOR E MAINTENANCE ORGANIZATION HONEYWELL INTERNATIONAL INC., 0000109290 550 STATE ROUTE 55 URBANA, OH US, 43078-9482 TEL: 787 658 1935 FAX: 787 658 3055 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER E MAINTENANCE ORGANIZATION HONEYWELL INTERNATIONAL INC., 6930 LAKEWOOD N. TULSA, OK US, 74117-1807 Class: Systems with Limitations: D DISTRIBUTOR 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval DA2R761K & EASA dual approval EASA.145.4644. 0000101130 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval HQ7R766N & EASA dual approval EASA.145.4539. Page 373 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 918 272 8000 FAX: 817 490 6911 HONEYWELL INTERNATIONAL INC., 0000101364 1944 E. SKY HARBOR CIR. PHOENIX, AZ US, 85034-3442 TEL: 787 658 1163 FAX: 602 365 5313 Class: Systems with Limitations: D DISTRIBUTOR 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval ZN3R030M & EASA dual approval EASA.145.4136. HONEYWELL INTERNATIONAL INC., 0000101363 11100 ORACLE ROAD N. TUCSON, AZ US, 85737-9588 TEL: 480 592 7321 FAX: 480 592 2058 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval HZ3R571L & EASA dual approval EASA.145.4132. HONEYWELL INTERNATIONAL SARL, 0000109987 EDISION ROAD BASINGSTOKE, HA GB, RG21 6QD TEL: 01256-222200 FAX: 01256-474932 Class: E MAINTENANCE ORGANIZATION HONEYWELL INTL. INC., 0000101361 23500 W. 105TH ST. OLATHE, KS US, 66061-8425 TEL: 913 712 2461 FAX: 913 712 5562 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval PR2R093L & EASA dual approval EASA.145.4140. HONEYWELL INTL. INC., 0000109165 111 S. 34TH ST. PHOENIX, AZ US, 85034-2802 TEL: 1-800-601-309... FAX: 602 231 7695 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION HONEYWELL INTL. INC., 0000101191 2525 W. 190TH ST. TORRANCE, CA US, 90504-6002 TEL: 514 422 3651 FAX: 514 422 3562 Class: B EQUIPMENT SUPPLIERS HONEYWELL INTL. INC., 3333 UNITY DR. MISSISSAUGA, ON Class: B EQUIPMENT SUPPLIERS C MANUFACTURER 0000100996 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Canadian AMO approval 01-70 & EASA dual approval Page 374 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval CA, L5L 3S6 TEL: 514 748 4469 FAX: 514 748 4420 E MAINTENANCE ORGANIZATION EASA.145.7011. HONEYWELL OPTOELECTRONICA, 0000109062 C. PARQUE INDUSTRIAL JUAREZ 3328 CIUDAD JUAREZ, CHI MX, 32630 TEL: 915 791 7558 FAX: 656 649 7560 Class: C MANUFACTURER HONEYWELL PTE LTD., 0000118502 7 JOO KOON CIR. SINGAPORE, SG SG, 629039 TEL: 65 6861 6955-271 FAX: 65 6861 4297 Class: B EQUIPMENT SUPPLIERS HONEYWELL SENSING & CONTROL, 0000101204 2080 ARLINGATE LANE COLUMBUS, OH US, 43228 TEL: 614 850 5000 FAX: 999 999 9999 Class: B EQUIPMENT SUPPLIERS HONEYWELL SENSING & CONTROL, 0000100880 500 NARRAGANSETT PARK DR. PAWTUCKET, RI US, 02861-4343 TEL: 866 288 7272 FAX: 815 266 3105 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER HONEYWELL SENSING & CONTROL, 0000115978 2080 ARLINGATE LANE COLUMBUS, OH US, 43228-4112 TEL: 614 850 5000 FAX: 614 850 1111 Class: C MANUFACTURER HONEYWELL SENSING & CONTROL, 0000101196 2520 SOUTH WALNUT RD. PLANT 4 FREEPORT, IL US, 61032 TEL: 800-537-6945 FAX: 815 235 6683 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER HONEYWELL SENSING & CONTROL, 245 RAILROAD ST. Class: B EQUIPMENT SUPPLIERS 0000102829 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 375 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification WOONSOCKET, RI US, 02895-3039 TEL: 800-537-6945 FAX: 401-762-2954 C MANUFACTURER HONEYWELL SENSING AND CONTROL, 0000135117 315 EAST STEPHENSON STREET FREEPORT, IL US, 61032 TEL: 302 669 0393 FAX: 815 235 5690 Class: B EQUIPMENT SUPPLIERS HONEYWELL SENSING AND PRODUCTIVITY, 12220 ROJAS DRIVE EL PASO, TX US, 79936-7713 TEL: 514 855 5000 FAX: 514 855 5000 0000136566 Class: D DISTRIBUTOR HONG KONG AIRCRAFT ENGINEERING CO., 80 S. PERIMETER ROAD LANTAU, HK HK, 999077 TEL: 999 999 9999 FAX: 999 999 9999 0000129574 Class: E MAINTENANCE ORGANIZATION HONG KONG AIRCRAFT ENGINEERING CO., 80 CHUN CHOI ST. TSEUNG KWAN O. TSEUNG KWAN O., HK HK, 999077 TEL: 999 999 9999 FAX: 999 999 9999 0000129575 Class: E MAINTENANCE ORGANIZATION HOPE AERO PROPELLER & COMPONENTS IN, 7605 BATH ROAD MISSISSAUGA, ON CA, L4T 3T1 TEL: 905 677 8747 FAX: 905 677 5935 0000108624 Scope of Approval Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Canadian AMO approval 53-91 & EASA dual approval EASA.145.7036. HOPE WEBBING CO., 0000108735 50 MARTIN ST. CUMBERLAND, RI US, 02864-5335 TEL: 401 333 8990 FAX: 401 334 6442 Class: C MANUFACTURER HORIZON AIR, Class: 0000109260 Learjet Approved Suppliers Page 376 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 5700 TRANSPORT WAY N. E. PORTLAND, OR US, 97218-2886 TEL: 503 331 5513 FAX: 503 249 6641 D DISTRIBUTOR HOUGHTON INTL INC, 0000127247 421 GARRETT ST. CARROLLTON, GA US, 30117 TEL: 16106664069 FAX: 770 830 0114 Class: C MANUFACTURER HOUGHTON VAUGHAN PLC, 0000108473 LEGGE ST. BIRMINGHAM, WM GB, B47 7EV TEL: 1213 596100 FAX: 1213 592458 Class: C MANUFACTURER HOUSTON PRECISION FASTENER, 0000108957 4923 CRANSWICK HOUSTON, TX US, 77041 TEL: 713 614 3889 FAX: 713 456 2471 Class: A SUBCONTRACTORS C MANUFACTURER HOWMET ALUMINUM CASTING LTD., 0000106861 4001 AUTOROUTE DES LAURENTIDES LAVAL, QC CA, H7L 3H7 TEL: 450-680-2534 FAX: 450 680 2600 Class: A SUBCONTRACTORS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM HOWMET ALUMINUM CASTING LTD., 0000106862 93 MOUNTAINVIEW ROAD N. GEORGETOWN, ON CA, L7G 4J6 TEL: 905-877-6936 FAX: 905-877-6938 Class: A SUBCONTRACTORS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM #98 HR SMITH GROUP OF COMPANIES, 0000135926 TARSMILL COURT, ROTHERWAS INDUSTRIAL EST HEREFORD, HT Class: B EQUIPMENT SUPPLIERS Specification Controlled: BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS Page 377 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval GB, HR2 6JZ TEL: 44 1568 708744 FAX: 999 999 9999 HRT INDUSTRIES INC., 0000111063 162 INDUSTRIEL ST-EUSTACHE, QC CA, J7R 5C2 TEL: 450-473-5600 FAX: 450-473-5977 Class: A SUBCONTRACTORS HUB TOOL SUPPLY INC., 0000104500 2546 LEONINE S. WICHITA, KS US, 67217-1071 TEL: 800 468 6482 FAX: 316 265 6229 Class: D DISTRIBUTOR HUBEI ALI-JIATAI AIRCRAFT, 0000132448 1 ZHONGHANG RD, FANCHENG DISTRICT XIANGYANG, 170 CN, 441057 TEL: 86 0 7103102301 FAX: 86 0 710310233 Class: B EQUIPMENT SUPPLIERS HUBER & SUHNER AG HERISAU, 0000108544 DEGERSHEIMSTRASSE 15 HERISAU, AR CH, 9100 TEL: 0041 71 353 4111 FAX: 0041 71 353 4 Class: C MANUFACTURER HUGHES BROS AIRCRAFTERS INC., 0000107768 11010 GARFIELD PLACE SOUTH GATE, CA US, 90280-7512 TEL: 323-773-4541 FAX: 562-923-9507 Class: A SUBCONTRACTORS HUMPHREY COSBURN PLASTICS, 89 UNION STREET TORONTO, ON Class: H COMMERCIAL OFF THE SHELF 0000137353 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: DROP HUMMER AND HEAT TREAT OF ALUM. ALLOYS Specification Controlled: PPS 01.02 FORMING ALUMINUM ALLOYS PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS Page 378 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval CA, M6N 3N2 TEL: 416-656-7700 FAX: 416-656-1931 HUNTINGTON ALLOYS CORP., 0000108349 3200 RIVERSIDE DR. HUNTINGTON, WV US, 25705-1764 TEL: 304 526 5385 FAX: 304 526 3909 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM HUNTSMAN ADVANCED MATERIALS, 0000107021 5121 W. SAN FERNANDO ROAD LOS ANGELES, CA US, 90039-1011 TEL: 281-719-6768 FAX: 281-719-6768 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 113 HUNTSMAN INTERNATIONAL CORP., 0000101152 4917 DAWN AVE. EAST LANSING, MI US, 48823-5605 TEL: 517 351 5900 FAX: 517 351 9300 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS HUSSEY COPPER, 0000108393 100 WASHINSTON ST. LEETSDALE, PA US, 15056 TEL: 800-733-8866 FAX: 724-251-4243 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM HUTCHINSON AEROSAPCE & INDUSTRY, IN, 82 SOUTH ST. HOPKINTON, MA US, 01748-2205 TEL: 508 417-7000 FAX: 508 417 7224 0000100324 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER HUTCHINSON AEROSPACE & INDUSTRY LIM, 0000104917 3650 BOUL TRICENTENAIRE MONTREAL, QC CA, H1B 5M8 TEL: 514-640-9006-295 FAX: 514 640 4077 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS Specification Controlled: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS MPS 204-02 REQUIREMENTS FOR A CONTROLLED ENVIRONMENT FACILITY FOR STRUCTURAL ADHESIVE BONDING AND COMPOSITE FAB Specification Controlled with Limitations: Page 379 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: LIMITED TO PART NO. 601R-41211 HUTCHINSON AEROSPACE & INDUSTRY, IN, 4510 VANOWEN ST. BURBANK, CA US, 91505-1135 TEL: 818-843-1000 FAX: 818-845-6978 0000101177 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval UT3R905L & EASA dual approval EASA.145.4242. HUTCHINSON AEROTECH, 0000133419 12A PLASKETTS CLOSE, KILBEGS ROAD ANTRIM, AT GB, BT41 4NN TEL: 028 9446 2059 FAX: 514 855 5000 Class: A SUBCONTRACTORS HUTCHINSON SEAL DE MEXICO, S.A. DE, 0000101235 PELICANOS NO. 313 ENSENADA, BC MX, 22785 TEL: 52-646-120-1100 FAX: 646 120 1102 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER HYCROME AEROSPACE LTD., 0000108999 UNT 3 WIDOW HILL ROAD HEASANFORD INTRUST BURNLEY, LA GB, BB10 2TT TEL: 1282 418300 FAX: 1282 418317 Class: A SUBCONTRACTORS Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limited to Electrochemical Etch only. BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to Manual Riveting only. BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to Type 2 Manual Application - Alodine 1132 Touch & Prep Pen to aid Electrochemical Etching on Aluminium parts only. Specification Controlled: BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Page 380 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 185-02 SHOT PEENING OF METAL PARTS PPS 17.03 SHOT PEENING PPS 20.03 PENETRANT FLAW DETECTION PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PSPEC 300 PENETRANT FLAW DETECTION PSPEC 410 CHROMIC ACID ANODISING PSPEC 419 CHEMICAL CONVERSION COATING OF ALUMINIUM AND ALUMINIUM ALLOYS PSPEC 703 PEENING OF METALLIC COMPONENTS PSPEC 910 ETCH AND EPOXY PRIMING Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to Manual Riveting only BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Limited to Interfaying of Anchor Nuts & Wet Installation of Fasteners BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: DEVIATION 2967 BAPS 194-03 APPLICATION OF THERMAL SPRAY COATINGS Limitation: Limited to Type 1 Corrosion Resistant Steel PPS 01.02 FORMING ALUMINUM ALLOYS Limitation: Cold forming only PSPEC 213 FORMING OF ALUMINUM ALLOYS Limitation: Cold form only. PSPEC 231 FABRICATION OF TITANIUM AND TITANIUM ALLOYS Limitation: Cold form only. PSPEC 236 FABRICATION OF STEELS Limitation: Cold form only. HYDE AERO MACHINING LTD., 0000128703 Class: Page 381 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification ALTHAM BUSINESS PARK, SYKESIDE ACCRINGTON, LA GB, BB5 5YH TEL: 01613 135844 FAX: 01613 426816 A SUBCONTRACTORS HYDE AERO PRODUCTS LTD/, 0000107613 TUDOR WORKS AHSTON ST. DUKINFIELD, CH GB, SK16 4RR TEL: 1613 435844 FAX: 1613 435833 Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PSPEC 401 HEAT TREATMENT OF ALUMINIUM AND ALUMINIUM ALLOYS PSPEC 501 MANUAL ARGON ARC WELDING Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Touch up only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual riveting only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Touch-up with prep-pen only BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limited to liquid nitrogen installation only. HYDE COATINGS LTD., 0000109992 BRIDGE ST. STALYBRIDGE, CH GB, SK15 1PH TEL: 0161 303 4000 FAX: 0161 303 4002 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING Page 382 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS PPS 32.01 CROMATE CONVERSION COATING PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PSPEC 410 CHROMIC ACID ANODISING PSPEC 419 CHEMICAL CONVERSION COATING OF ALUMINIUM AND ALUMINIUM ALLOYS PSPEC 910 ETCH AND EPOXY PRIMING Specification Controlled with Limitations: BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation for Type 1 and Type 2 (Alodine 1132 Touch & Prep Pen). PSPEC 300 PENETRANT FLAW DETECTION Limitation: Not Approved for Machined Items HYDE PRECISION COMPONENTS LTD., 0000108643 OLDHAM ST. DEWTON MANCHESTER, GM GB, M34 3SA TEL: 1613 379242 FAX: 1613 350787 Class: A SUBCONTRACTORS HYDRA-ELECTRIC CO., 0000101495 3151 KENWOOD ST. BURBANK, CA US, 91505-1052 TEL: 818-843-6211-201 FAX: 818-843-1209 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval AC3R366L & EASA dual approval EASA.145.5361. HYDRAFLOW, 0000101433 1881 MALVERN AVE. FULLERTON, CA US, 92833-2403 TEL: 714 773 2600 FAX: 714 773 6351 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER HYDREP, 0000109706 AEROPORT DE DINARD PLEURTUIT DINARD, CEDEX, 35 FR, 35801 Class: E MAINTENANCE ORGANIZATION Page 383 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 99 82 79 19 FAX: 2 99 827934 HYDRO FITTING MFG. CO., 0000107087 733 E. EDNA PL. COVINA, CA US, 91723-1409 TEL: 626-967-5151 FAX: 818 339 4454 Class: C MANUFACTURER HYDRO-AIRE INC., 0000100886 241 S. ABBE ROAD ELYRIA, OH US, 44035-6239 TEL: 440-284 5437 FAX: 440 322 3378 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval C7CR238J & EASA dual approval EASA.145.4357. HYDRO-AIRE INC., 0000100884 3000 WINONA AVE. BURBANK, CA US, 91504-2540 TEL: 888-236-5165 FAX: 888-236-5166 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION HYDRODYNAMICS POWER ENG.LTD., 0000108046 KNOCKMORE INDUSTRIAL ESTATE LISBURN, LS GB, BT28 2AR TEL: 2892 662781 FAX: 2892 602954 Class: C MANUFACTURER HYMEC AEROSPACE (UK) LIMITED, 0000133669 191 PLYMBRIDGE ROAD ESTOVER, DV GB, PL6 7JS TEL: 01752 511002 FAX: 514 855 5000 Class: A SUBCONTRACTORS HYPERCOAT-DOWNING LTD, 0000106944 3750-B LAIRD ROAD UNIT 6 MISSISSAUGA, ON CA, L5L 0A6 TEL: 905-828-2399 FAX: 905 569 0302 Class: D DISTRIBUTOR HYSPEED (C.N.C) LIMITED, 0000131529 CLOVELLY ROAD, SOUTHBOURNE SOUTHBOURNE, SW Class: A SUBCONTRACTORS Page 384 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval GB, PO10 8PE TEL: 01243377751 FAX: 01243377751 HYTEK FINISHES CO., 0000107089 8127 S. 216TH ST. KENT, WA US, 98032-1996 TEL: 253 872 7160 FAX: 253 872 7214 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS CAPTIVE LABORATORY MPS 160-08 CADMIUM PLATING OF CARBON AND LOW ALLOY STEELS BELOW 220,000PSI, COPPER ALLOYS AND CRES STEELS PPS 17.03 SHOT PEENING PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.05 SURFACE TREATMENTS OF CORROSION RESISTANT STEELS PPS 31.07 CLEANING AND STRIPPING OF PAINTED SURFACES PPS 32.01 CROMATE CONVERSION COATING PPS 34.08 EPOXY PRIME PSPEC 300 PENETRANT FLAW DETECTION PSPEC 419 CHEMICAL CONVERSION COATING OF ALUMINIUM AND ALUMINIUM ALLOYS Specification Controlled with Limitations: BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-01 ALKALINE CLEANING Limitation: LIMITED TO TITANIUM & TITANIUM ALLOYS PARTS ONLY BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT Page 385 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval RESISTANT ALLOYS AND TITANIUM ALLOYS Limitation: LIMITED TO TITANIUM & TITANIUM ALLOYS PARTS ONLY BAPS 185-02 SHOT PEENING OF METAL PARTS Limitation: MACHINE 1&7 ONLY PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS Limitation: Limited to stress and embrittlement relief only PSPEC 420 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS Limitation: Limited to stress and embrittlement relief only I. C. A, 0000117704 46 UNIVERSITY ST. BELFAST, BL GB, BT7 1HH TEL: 01232 24219 FAX: 01231 333866 Class: C MANUFACTURER IABG DRESDEN, 0000132537 ZUM WINDKANAL 17 DRESDEN, 14 DE, 01109 TEL: 514 855 5000 FAX: 514 855 5000 Class: A SUBCONTRACTORS IACOBUCCI HF ELECTRONICS, 0000123646 LOC. COLIE BAIOCCO FERENTINO, FR IT, 03013 TEL: 077539 25111 FAX: 011 39 0775 39000 Class: H COMMERCIAL OFF THE SHELF IBEX MARINA ROPES LIMITED, 0000120334 BRUNSWICK ST. HEYWOOD, LA GB, OL10 1HA TEL: 1706360363 FAX: 01706622986 Class: C MANUFACTURER IC & S, 0000111055 1833 WILLIAM PENN WAY LANCASTER, PA US, 17601-6712 TEL: 717-391-6250 FAX: 717-391-6254 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: MANUAL RIVETING ON THE BD500 TEST ARTICLE ONLY. BAPS 157-27 INTEGRAL FUEL TANK SEALING Limitation: REPAIRS ON THE BD500 TEST ARTICLE ONLY. BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: REPAIRS ON THE BD500 TEST ARTICLE ONLY. Page 386 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval ICG INTERNATIONAL COMMUNICATIONS GR, 0000104580 230 PICKETT'S LINE NEWPORT NEWS, VA US, 23603-1366 TEL: 757 947 1030-113 FAX: 757 947 1035 Class: Systems with Limitations: C MANUFACTURER 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station Approval 2ICR177B & EASA dual Approval EASA.145.6225 ICO RALLY, 0000103378 2575 BAYSHORE ROAD E. PALO ALTO, CA US, 94303-3210 TEL: 650 856 9900 FAX: 650 856 8378 Class: C MANUFACTURER ICON POLYMER LTD., 0000110050 VICTORIA WORKS RETFORD, NT GB, DN22 6HH TEL: 01777 714300 FAX: 01777 709739 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER ICORE INTERNATIONAL INC., 0000105423 3780 FLIGHTLINE DR. SANTA ROSA, CA US, 95403-1054 TEL: 707 535 2700 FAX: 707-521-2524 Class: C MANUFACTURER ICSA, 0000124075 RIO ZANCARA S/N TOLEDO, 45 ES, 45007 TEL: 925 269 504 FAX: 925 269 510 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Captive laboratory for all Aernnova's sister companies listed in the AS/EN9100 certificate # Limitation: OP-0003/2002 Specification Controlled: BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS Page 387 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 188-08 MACHINING OF COMPOSITES BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES Limitation: limited to straight through holes in detail parts only. Drilling of two or more components of the Limitation: same, or dissimilar, material is not permitted BAPS 260-010 MACHINING, FORMING AND PREPARATION OF NON-METALLIC HONEYCOMB CORE FOR LAY-UP IN SANDWICH COMPONENTS Limitation: Class B & Class C parts limited to core drying, splicing, stabilization and lay-up operations Limitation: (no machining or heat forming operations) IDD AEROSPACE CORP., 0000102778 18225 N.E. 76TH ST. REDMOND, WA US, 98052-5021 TEL: 425-885-4353 FAX: 425-883-0387 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS IDEAL FASTENERS INC, 0000131620 3850 E MIRALOMA AVENUE ANAHIEM, CA US, 92806 TEL: 514-855-5001 FAX: 514-855-5001 Class: C MANUFACTURER IDEAL INDUSTRIES INC., 0000109065 1000 PARK AVE. SYCAMORE, IL US, 60178-2420 TEL: 800 435 0705 FAX: 800 533 4483 Class: C MANUFACTURER IDEAL PRECISION METER CO., 0000117398 5816 CREEDMOOR ROAD RALEIGH, NC US, 27612-2310 TEL: 919 571 2000 FAX: 919 571 2975 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: APPROVAL FOR WICHITA SITE ONLY Page 388 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval IDENTIFAB INDUSTRIES LTD., 0000107770 43 BAYWOOD ROAD TORONTO, ON CA, M9V 3Y8 TEL: 416 743 7343 FAX: 416 743 2188 Class: A SUBCONTRACTORS II MORROW INC. (GARMIN AT), 0000107614 2345 TURNER ROADS. E. SALEM, OR US, 97302-2059 TEL: 503 581 3423 FAX: 503 364 2138 Class: B EQUIPMENT SUPPLIERS IKA LABORATORIES ( 2006 ) LTD., BAR YEHUDA 52 NESHER, 02 IL, 36601 TEL: 04 8211631 FAX: 04 8211637 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-5A CORROSION TESTING INDEPENDANT LABORATORY ILLINOIS LOCK CO., 0000101531 301 HINTZ ROAD W. WHEELING, IL US, 60090-5754 TEL: 800-733-3907-220 FAX: 847 537 1881 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS IMAGINATION, 0000116644 293 DE LA MONTAGNE MONTREAL, QC CA, H3C 4K4 TEL: 514 931 0049 FAX: 514 931 3139 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods 0000129530 IMAGING SYSTMES CROUP/ HORIZONS INC, 18531 S. MILES ROAD CLEVELAND, OH US, 44128-4237 TEL: 800 482 7758 FAX: 216 475 6507 0000108414 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 389 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address IMP AEROSTRUCTURES, 0000109667 13 TANTRAMAR CRES. AMHERST, NS CA, B4H 3Y7 TEL: 902 667 3315-104 FAX: 902 667 1047 Classification Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 138-49 APPLICATION OF BAMS 565-013 HEAT RESISTANT COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-27 INTEGRAL FUEL TANK SEALING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 168-15 STRESS RELIEF OF METALS BAPS 180-001 ALKALINE CLEANING BAPS 180-040 AQUEOUS DEGREASING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY PPS 01.02 FORMING ALUMINUM ALLOYS PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN PPS 20.03 PENETRANT FLAW DETECTION Page 390 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PPS PPS PPS PPS PPS PPS PPS PPS PPS PPS 20.07 20.08 30.01 31.02 31.07 32.01 32.03 34.03 34.08 34.41 CONDUCTIVITY TESTING HARDNESS TESTING HEAT TREATMENT OF ALUMINUM ALLOYS CLEANING PROCESSES OF ALUMINUM CLEANING AND STRIPPING OF PAINTED SURFACES CROMATE CONVERSION COATING CHROMIC ACID ANODIZING (A1) APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) EPOXY PRIME APPLICATION OF EPOXY-POLYAMIDE ENAMEL (F22) Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Limitation: ISOTEMP Model #838F HU-013 low temperature lab oven at 250°F. Limitation: SUNKISS paint oven HU-018 at 120°F. BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: MANUAL RIVETING ONLY BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation to Type 2 for electrical bonding ONLY . BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Installation of interference fit bushings limited to liquid nitrogen only BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Limitation: TYPE 1A & 1D IMPERIAL DECORATIVE HARDWARE, 0000110551 346 RUE ISABEY ST-LAURENT, QC CA, H4T 1W1 TEL: 514 737 3000 FAX: 514 737 1626 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods IMPERIAL FASTENERS CO. INC., 0000110552 1400 S.W. 8TH ST. POMPANO BEACH, FL US, 33069 TEL: 954 782 7130 FAX: 954 782 0089 Class: H COMMERCIAL OFF THE SHELF IMPRESA AEROSPACE, Class: 0000104418 Specification Controlled: Page 391 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address 344 W. 157TH STREET GARDENA, CA US, 90248 TEL: 310 354 1200 FAX: 310 719 7001 Classification A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual application only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 2 Manual Application Alodine 1132 Touch and Prep Pen BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 2 Manual Application Alodine 1132 Touch and Prep Pen IMR TEST LABS, 0000108096 131 WOODSEDGE DR. LANSING, NY US, 14882-8940 TEL: 607 533 7000 FAX: 607 533 9210 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2E MECHANICAL TESTING: PLASTICS, RUBBERS STATIC AND ELASTIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS Page 392 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-4C TESTING OF THERMAL PROPERTIES (EXPANSIONS, TMA, ETC.) BAERD-GEN-018-4D TESTING OF FLAMMABILITY PROPERTIES BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS INDEPENDANT LABORATORY LES 1018 SWAGING AND TESTING OF CABLE ASSEMBLIES IMT AVIATION LIMITED, 0000136902 SERVICE FACILITY, AVIATION HOUSE, BEARWA WENDENS AMBO, SAFFRON WALDEN, ES GB, CB11 4JX TEL: 514 855 5000 FAX: 514 855 5000 Class: E MAINTENANCE ORGANIZATION INAER AVIONES ANFIBIOS S.A.U., 0000124439 CARRETERA DE MADRID KM 14 SALAMANCA, 37 ES, 37893 TEL: 923 30 50 01 FAX: 923 30 50 97 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: General limitation; Limitation: INAER AVIONES ANFIBIOS is Conditionally approved for the incorporation of SB 215-43687 Limitation: and SB 215-4366 on aircraft 2064 / 2067 / 2069 and installation of FDR / CVR / QAR. Limitation: This conditional approval will remain in effect until INAERAVIONES ANFIBIOS attain the CL Limitation: 415 type endorsement on their EASA approval certificate ES.145.086. INAIR AVIATION SERVICES COMPANY, 8225 COUNTRY CLUB PLACE INDIANAPOLIS, IN Class: E MAINTENANCE ORGANIZATION 0000135190 Page 393 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 46214 TEL: 999 999 9999 FAX: 999 999 9999 INDEPENDENT INK INC., 0000107095 14705 S. AVALON BLVD. GARDENA, CA US, 90248-2009 TEL: 310 523 4657 FAX: 310 329 0943 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: LIMITED TO INK PRODUCT -SEE EMCM NO 663 INDESTRUCTIBLE PAINT CO. LTD., 0000109995 23-25 PENTOS DR. SPARKHILL BIRMINGHAM, WM GB, B11 3TA TEL: 0121 202 2485 FAX: 0121 778 4388 Class: C MANUFACTURER INDIANA AIRCRAFT HARDWARE INC., 0000107096 221 S. MAIN ST. FORTVILLE, IN US, 46040-1514 TEL: 317-485-6500 FAX: 317-485-6501 Class: C MANUFACTURER INDIUM CORP. OF AMERICA, 0000108350 1676 LINCOLN AVE. UTICA, NY US, 13502-5312 TEL: 315-381-7606 FAX: 315-853-1000 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM INDUMET S.A. DE C.V., 0000122428 BLVD. ALFREDO DEL MAZO N. 1420-B TOLUCA, MEX MX, 50030 TEL: 722 2373188 FAX: 722 2373036 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limitation: Indumet S.A. de C.V. is not authorized to purchased raw material. INDUSOL INC., 0000108420 11 DEPOT ST. SUTTON, MA US, 01590-3825 TEL: 508-865-9516 FAX: 508-865-9518 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM INDUSTRIAL ALLOYS, 0000108674 3880 W. VALLEY BLVD. Class: C MANUFACTURER Page 394 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval POMONA, CA US, 91789-1515 TEL: 909 594 7511 FAX: 909 595 0439 INDUSTRIAL GASKETS INC, 0000132636 9325 S.W. RIDDER ROAD, SUITE 420 WILSONVILLE, OR US, 97070 TEL: 800 444 7157 FAX: 800 444 7157 Class: C MANUFACTURER INDUSTRIAL LAMINATES / NORPLEX, 0000114829 665 LYBRAND ST. POSTVILLE, IA US, 52162-7792 TEL: 563 864 7321 FAX: 563 864 4231 Class: C MANUFACTURER INDUSTRIAL METAL CLEANING CORP., 0000118222 801 CASS AVE. ST-LOUIS, MO US, 63106-4506 TEL: 314 621 4209 FAX: 314 621 4210 Class: A SUBCONTRACTORS INDUSTRIAL METALS INTL. LTD., 0000107097 2065 FIFTH AVE. RONKONKOMA, NY US, 11779-6905 TEL: 631-981-2300 FAX: 631 981 1339 Class: D DISTRIBUTOR INDUSTRIAL NEOTEX, S.A., 0000133098 C/ FORJADORES PARCELA 17-11 BOADILLA DEL MONTE, 28 ES, 28660 TEL: 916 324 391 FAX: 916 324 284 Class: C MANUFACTURER INDUSTRIAL SPECIALTIES SUPPLY, 0000104511 3941 E. 29TH ST. SUITE 606 TUCSON, AZ US, 85711-6136 TEL: 520 745 5800 FAX: 520 745 5801 Class: H COMMERCIAL OFF THE SHELF INDUSTRIAL STEEL & WIRE, Class: 0000133915 Specification Controlled: LES 1365 SHOT PEENING Page 395 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 1901 N NARRAGENSETT AVE CHICAGO, IL US, 60639 TEL: 773 804 0404 FAX: 773 804 0405 D DISTRIBUTOR INDUSTRIAL TECTONICS BEARINGS, 0000107098 18301 S. SANTA FE AVE. RANCHO DOMINGUEZ, CA US, 90221-5519 TEL: 734-426-4681 FAX: (734) 426-4333 Class: C MANUFACTURER INDUSTRIAL TUBE CORP., 0000110321 3091 INDIAN AVE. PERRIS, CA US, 92571-3228 TEL: 951-657-2611-257 FAX: 951-940-0191 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER INDUSTRIAS DELTA VIGO S.L., 0000135895 CTRA, PEINADOR-REDONDELA, MK.6 PONTEVEDRA, 36 ES, 36815 TEL: 514-855-5000 FAX: 514 855 5000 Class: A SUBCONTRACTORS INDUSTRIES TRIDENT INC., 0000107482 8277 HENRI BOURASSA E. MONTREAL, QC CA, H1E 1P4 TEL: 514 648 0285-240 FAX: 514 648 8780 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS Learjet Approved Suppliers Scope of Approval Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Specification Controlled: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Vibro-engraving marking Page 396 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 188-02 COLD WORKING OF HOLES Limitation: Limited to type 1 only INERTIA SWITCH INC., 0000101450 70 GREENBUSH ROAD S. ORANGEBURG, NY US, 10962-1323 TEL: 845 359 8300 FAX: 845 359 6227 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION INESPASA, 0000125285 P.E. AEROPOLIS C SEVILLA, 41 ES, 41300 TEL: 955 343 000 FAX: 955 343 003 Class: A SUBCONTRACTORS INFLITE ENGINEERING SERVICES, 0000108023 STANSTEAD AIRPORT INFLITE HOUSE 1 A STANSTEAD, ES GB, CM24 IRY TEL: 1279 681681 FAX: 999 999 9999 Class: A SUBCONTRACTORS INFLITE ENGINEERING SERVICES LTD, 0000135083 BROADLINK INDUSTRIAL ESTATE, MOSTON ROAD MANCHESTER, LA GB, M24 1UB TEL: 514 855 5000 FAX: 514 855 5000 Class: A SUBCONTRACTORS INFLITE ENGINEERING SYSTEM, 0000129031 DUNMOW ROAD BISHOP'S STORTFORD, HT GB, CM23 5RG TEL: 08714 333000 FAX: 999 999 9999 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: This site is approved for the receipt of BA purchase orders only. Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 172-34 FUSION WELDING Specification Controlled with Limitations: BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to Type II manual application only INGENIO AEROSPACE INC., 0000133270 1350 RUE MAZURETTE, S-210 MONTREAL, QC Class: B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Challenger and Global 5000/6000 only Page 397 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval CA, H4N 1H2 TEL: 514 500 0561 FAX: 514 551 9876 INLAND MACHINE CO., 0000108659 10762 EDISON CT. RANCHO CUCAMONGA, CA US, 91730-4845 TEL: 909 484 5579 FAX: 909 484 4825 Class: C MANUFACTURER INNODYNE SYSTEMS INC., 0000120539 110D W. DUDLEY TOWN ROAD BLOOMFIELD, CT US, 06002-1360 TEL: 860-242-2442-302 FAX: 860 242 2662 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval I6JR126Y & EASA dual approval EASA.145.5948. INNOTECH AVIATION, 0000125393 1100 RUE PERCIVAL-REID ST-LAURENT, QC CA, H4S 0A1 TEL: 514 636 8484 FAX: 514 636 8887 Class: A SUBCONTRACTORS INNOTECH AVIATION GROUP, 0000100720 10225 RYAN AVE. DORVAL, QC CA, H9P 1A2 TEL: 514 420 2981 FAX: 514 636 8644 Class: Systems with Limitations: D DISTRIBUTOR 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Canadian AMO approval 03-60 & EASA dual approval EASA.145.7038. INNOVATIVE POWER SOLUTIONS, LLC, 0000121063 373 SOUTH ST. EATONTOWN, NJ US, 07724-1863 TEL: 732 544 1075 FAX: 732 544 1078 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval INNR463X& EASA dual approval EASA.145.603. INNOVATIVE SOLUTIONS, 0000101849 720 PENNSYLVANIA DR. EXTON, PA US, 19341-1129 TEL: 610-646-9800-560 FAX: 610-646-0149 Class: Systems with Limitations: C MANUFACTURER 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval I72R916X & EASA dual approval EASA.145.6021. INSTRUMENT SPECIALTIES CO., 661 MYRTLE AVE. Class: B EQUIPMENT SUPPLIERS 0000107618 Specification Controlled: BAPS 138-050 EXTERIOR PAINTING BOMBARDIER AIRCRAFT Page 398 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BOONTON, NJ US, 07005-1916 TEL: 973 335 2136-11 FAX: 973 335 5740 D DISTRIBUTOR INSTRUMENT TECH CORP., 0000106023 15060 BELTWOOD PKWY. E. ADDISON, TX US, 75001-3715 TEL: 972 499 6543 FAX: 972 458 8789 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval RT1R464K & EASA dual approval EASA.145.4569. INSULTAB INC., 0000108865 50 EVERBERK ROAD WOBURN, MA US, 01801-1019 TEL: 781 935 0800-224 FAX: 781 935 0879 Class: C MANUFACTURER INTEC-AIR S.L. - AERNNOVA, 0000108766 C/VIA FINLANDIA S/N CADIZ, 11 ES, 11011 TEL: 9560 76000 FAX: 9560 76007 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-27 INTEGRAL FUEL TANK SEALING BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS Page 399 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 186 CHEMICAL MILLING OF ALUMINUM CAPTIVE LABORATORY Specification Controlled with Limitations: BAERD-GEN-018-5A CORROSION TESTING Limitation: Limited to Salt Spray Testing only BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Limited to ovens ID IA-116, IA-117, IA-118 and IA-210 for the 50 – 70°C (125 – 160°F) Limitation: Temperature Limitation: range and painting train ID #IA-119 for a temperature of 140°F (60°C). BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limitation to preparation only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limitation to manual installation only BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Limitation to fay surface sealing and wet installation of fasteners BAPS 160-10 CHROMIC ACID ANODIZING Limitation: PARTS THAT REQUIRE ALKALINE ETCH OR HOT WATER SEAL CAN NOT BE PROCESSED BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation to touch-up only (type II) BAPS 168-15 STRESS RELIEF OF METALS Limitation: Limited for Stress Relief of Titanium in Furnaces IA-500 & IA-1000 Only INTEGRATED COMPONENTS INC., 0000106261 2525 S. LEONINE WICHITA, KS US, 67217 TEL: 316-942-6600 FAX: 316 942 6601 Class: A SUBCONTRACTORS INTELEC MARKETING, 2455 STE-MARIE MASCOUCHE, QC CA, J7K 3C2 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods 0000110558 Page 400 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 450-474-4343 FAX: 450-474-7370 INTERFACE SOLUTIONS INC., 0000114691 2885 STATE ROUTE 481 FULTON, NY US, 13069-4221 TEL: 717-207-6026 FAX: 717-693-2162 Class: C MANUFACTURER INTERNATIONAL AVIONICS INC., 0000101484 3782 ARAPAHOE ROAD ADDISON, TX US, 75001-4311 TEL: 972 247 7498 FAX: 972 247 1376 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION INTERNATIONAL SEAL CO. INC., 0000107105 2041 E. WILSHIRE AVE. SANTA ANA, CA US, 92705-4726 TEL: (706) 812-7816 FAX: (706) 812-7816 Class: C MANUFACTURER INTERNATIONAL WATER-GUARD, 0000102255 3771 N. FRASER WAY, UNIT1 BURNABY, BC CA, V5J 5G5 TEL: 604 255-5555-113 FAX: 604 255 5685 Class: Systems with Limitations: C MANUFACTURER 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Canadian AMO approval 120-97 & EASA dual approval EASA.145.7124. INTERNATIONAL WIRE HIGH PERFORMANCE, 1570 CAMPTON ROAD INMAN, SC US, 29349-8433 TEL: 864-472-9022 FAX: 864 472 2727 Class: C MANUFACTURER 0000108866 INTERSIL CORP., 0000107063 1650 ROBERT J CONLAN BLVD NE PALM BAY, FL US, 32905 TEL: 321-729-5602 FAX: 321-729-7320 Class: C MANUFACTURER INTERTAPE POLYMER GROUP, 317 KENDALL AVE. MARYSVILLE, MI Class: C MANUFACTURER 0000108476 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM #772 Page 401 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 48040-1911 TEL: 810-941-9000 FAX: 810-364-9164 INTERTECHNIQUE S.A., 0000102972 1 SAGNAT ROCHE LA MOLIERE, 42 FR, 42230 TEL: 334 7790 7105 FAX: 477 907170 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION INTERTEX TEXTILES INC., 0000107773 1200 SPEERS ROAD, UNIT 2 OAKVILLE, ON CA, L6L 2X4 TEL: 905 842 7627 FAX: 905 842 7704 Class: B EQUIPMENT SUPPLIERS INTERTRADE, 0000102589 4700 NORTHRIVER BLVD. N.E. CEDAR RAPIDS, IA US, 52411-6636 TEL: 319-739-0230 FAX: 319 378 9446 Class: D DISTRIBUTOR INTERTURBINE INC., 0000126907 2617 N. GREAT S.W. PKWY., SUITE 200 GRAND PRAIRIE, TX US, 75050 TEL: 817-633-8377 FAX: 817-633-5672 Class: D DISTRIBUTOR INTERTURBINE LOGISTICS (UK) LTD., 0000107092 37 EDISON ROAD ST-IVES, CA GB, PE27 3GZ TEL: 1480 377 111 FAX: 1480 356 074 Class: D DISTRIBUTOR INTERTURBINE-RUSKY LLC, 0000136149 BAHRUSHINA STREET, 32 MOSCOW, 50 RU, 115054 TEL: 74 959 895 327 FAX: 999-999-9999 Class: D DISTRIBUTOR IPECO, 0000100257 BUILDING 4, AVIATION WAY Class: B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to after markiet aircraft part only Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 402 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval SOUTHEND ON SEA, ES GB, SS2 6UN TEL: 1702 209746 FAX: 44 1702 540 782 IPECO INC., 0000101119 2275 JEFFERSON ST. TORRANCE, CA US, 90501-3302 TEL: 310 783 4700 FAX: 310 783 4707 Class: Systems with Limitations: D DISTRIBUTOR 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval XI3R972L & EASA dual approval EASA.145.5366. IRD SWITCHES, 0000110226 428 GENEVA ROAD ALEXANDRIA, MN US, 56308-7900 TEL: 320 759 1112 FAX: 320 759 2217 Class: C MANUFACTURER IS-RAYFAST LTD, 0000108052 2 LYDIARD FIELDS SWINDON, WI GB, SN5 8UB TEL: 1793 616 700 FAX: 1793 644 304 Class: D DISTRIBUTOR ISO GROUP INC., 0000117146 2350 COMMERCE PARK DR. NE., SUITE 2 PALM BAY, FL US, 32905 TEL: 321-773-5710 FAX: 321 777 0499 Class: D DISTRIBUTOR ITALTECNICA SRL, 0000127272 VIALE EUROPA N. 31 TRIBANO, PD IT, 35020 TEL: 049 9585388 FAX: 049 5342439 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to the CL 215/415 program only ITRAN-TOMPKINS RUBBER CORP., 0000101084 375 METUCHEN ROAD SOUTH PLAINFIELD, NJ US, 07080-4806 TEL: 908-754-8100-25 FAX: 908-754-0032 Class: B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS ITT AEROSPACE CONTROLS, Class: Systems with Limitations: 0000102636 Page 403 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 28150 INDUSTRY DR. VALENCIA, CA US, 91355-4100 TEL: 661-295-4089 FAX: 651 295 4196 B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval BV4R090M & EASA dual approval EASA.145.4577. ITT CANNON, 0000111036 AV. LIBRE COMERCIO S/N, PARQUE INDUSTRIA NOGALES, SONORA, SON MX, 84093 TEL: 52 631 311 0050 FAX: 52 631 311 006 Class: C MANUFACTURER ITT CANNON GMBH, 0000136598 CANNONSTRASSE 1 WEINSTADT, 08 DE, 71384 TEL: 497151699254 FAX: 497151699370 Class: C MANUFACTURER ITT ENIDINE INC., 0000102232 7 CENTRE DR. ORCHARD PARK, NY US, 14127-2293 TEL: 716 740 9426 FAX: 716 667 1385 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER ITW FASTEX, 0000123920 195 ALGONQUIN ROAD DES PLAINES, IL US, 60016-6197 TEL: V847 299 2222 FAX: 847 390 6183 Class: C MANUFACTURER ITW FLUID PRODUCT GROUP, 0000107945 616 E. INDUSTRIAL ST. DE WITT, IA US, 52742 TEL: 563-659-8413-314 FAX: 563-659-5112 Class: C MANUFACTURER ITW FLUID PRODUCTS GROUP, 0000108452 3624 W. LAKE AVE. GLENVIEW, IL US, 60026-1215 TEL: 563-659-5532-107 FAX: 847 657 5388 Class: C MANUFACTURER Page 404 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval ITW POLYMERS ADHESIVES, 0000123458 30 ENDICOTT ST. DANVERS, MA US, 01923-3786 TEL: 800-626-7226 FAX: 800 765 4329 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to BAMS 537-003 Fire retardant epoxy paste adhesive ITW PRO BRANDS, 0000105743 4647 HUGH HOWELL ROAD TUCKER, GA US, 30084-5004 TEL: 770-243-8914 FAX: 770 934 8899 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM #720 ITW PRO BRANDS*CC, 0000137590 805 E OLD HWY 56 OLATHE, KS US, 66061 TEL: 913-397-9889 FAX: 913-397-8761 Class: H COMMERCIAL OFF THE SHELF ITW SWITCHES, 0000102757 2550 MILLBROOK DR. BUFFALO GROVE, IL US, 60089-4694 TEL: 800-544-3354 FAX: 847-876-9440 Class: C MANUFACTURER J & M PRODUCTS INC., 0000103219 1647 TRUMAN ST. SAN FERNANDO, CA US, 91340-3119 TEL: 800-624-2198 FAX: 818-837-0250 Class: C MANUFACTURER J W ALUMINUM, 0000108781 435 OLD MT. HOLLY ROAD MOUNT HOLLY, SC US, 29445-2805 TEL: 843 572 1100 FAX: 843 572 3546 Class: C MANUFACTURER J W KANE PRECISION ENGINEERING, 1 CHARLESTOWN CRES. PORTADOWN, AM GB, BT63 5ZE Class: A SUBCONTRACTORS 0000110003 Specification Controlled: BAPS 188-08 MACHINING OF COMPOSITES Specification Controlled with Limitations: Page 405 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification TEL: 1 283 8333991 FAX: 1 2838 350182 Learjet Approved Suppliers Scope of Approval BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to Manual Riveting ONLY PSPEC 907 INSTALLATION & RETENTION OF BEARINGS BY GROOVE STAKING Limitation: Limited to the installation of Bearing RSTNG05DA J&K ELECTRONICS INC., 0000134523 58 SAWGRASS DR. BELLPORT, NY US, 11713 TEL: 631 205 0005-187 FAX: 631 610 2905 Class: D DISTRIBUTOR J-SQUARED TECHNOLOGIES INC., 0000132430 4015 CARLING AVE., SUITE 101 KANATA, ON CA, K2K 2A3 TEL: 613 592 9540 FAX: 613 592 7051 Class: D DISTRIBUTOR J. DIRATS AND CO, INC. DBA DIRATS, 0000131262 41 AIRPORT ROAD WESTFIELD, MA US, 01085 TEL: 413 568 1571 FAX: 413 568 1453 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4E TESTING OF WEAR AND ABRASION PROPERTIES BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS INDEPENDANT LABORATORY Page 406 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval J. ENNIS FABRICS LTD., 0000110560 12122 68TH ST. EDMONTON, AB CA, T5B 1R1 TEL: 800-663-6647 FAX: 888-274-2910 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods J.T.D. STAMPING CO. INC., 0000108733 403 WYANDANCH AVE. NORTH BABYLON, NY US, 11704-1503 TEL: 631 643 4144 FAX: 631 643 4016 Class: C MANUFACTURER J2 PRODUCTS, 0000107818 54 AUDIA CT., SUITE 2A CONCORD, ON CA, L4K 3N4 TEL: 888 880-0025 FAX: 416 669 9419 Class: D DISTRIBUTOR JACO AEROSPACE INC., 0000136762 2050, LINCOLN AVE. PASADENA, CA US, 91103 TEL: 626 855 2870 FAX: 626 855 2872 Class: D DISTRIBUTOR JACOBS & THOMPSON INC., 0000124402 89 KENHAR DR. WESTON, ON CA, M9L 2R3 TEL: 800 663 9840-... FAX: 416 749 6618 Class: D DISTRIBUTOR JAMAICA BEARINGS COMPANY INC., 0000107113 1700 JERICHO TPKE. NEW HYDE PARK, NY US, 11040-4738 TEL: 516-326-1350 FAX: 516 326 2045 Class: D DISTRIBUTOR JAMCO AMERICA INC., 1018 80TH ST. S. W. EVERETT, WA Class: C MANUFACTURER 0000102085 Page 407 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 98203-6278 TEL: 425-347-4735 FAX: 425-353-2343 JAMES FISHER INSPECTION, 0000129094 72-B BLACKPOLE TRADING ESTATE W. WORCESTER, WC GB, WR3 8TJ TEL: 0 1905 459790 FAX: 0 1905 2459791 Class: A SUBCONTRACTORS JAMES WALKER & CO.. LTD., 0000108027 LION WORKS WOKING, SY GB, GU22 8JL TEL: 1483 757 575 FAX: 1483 755 711 Class: C MANUFACTURER JAMES WHITE & SON (ENGINEERING) CO., COMMERCIAL ROAD READING, RE GB, RG2 0RU TEL: 0118 9873421 FAX: 0118 9750521 Class: A SUBCONTRACTORS Specification Controlled: PPS 01.02 FORMING ALUMINUM ALLOYS JANICO INC., 0000105861 1075 BEGIN ST-LAURENT, QC CA, H4R 1V8 TEL: 514 745 3440 FAX: 514 745 3442 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Supplier is no longer required to perform Delta FAI for placards not affected by drawing changes for the Challenger program. JAZZ AIR LP, 0000129810 310 GOUDEY DR. ENFIELD, NS CA, B2T 1E4 TEL: 902 873 5000 FAX: 905 694 0055 Class: D DISTRIBUTOR JAZZ AVIATION COMPONENT SHOP, 0000130376 8050 22 ST. N.E., ( HGR 101 ) CALGARY, AB CA, T2E 7H6 TEL: 403 974 2399 FAX: 403 291 9590 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: in accordance with TCCA AMO 21-92 & EASA dual approval EASA.145.7256 JCM ENGINEERING CORP., Class: 0000108850 0000120132 Specification Controlled: BAPS 176-17 RADIOGRAPHIC INSPECTION Page 408 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 2690 CEDAR ST. E. ONTARIO, CA US, 91761-8533 TEL: 909 923 3730 FAX: 909 923 3733 A SUBCONTRACTORS JEDO TECHNOLOGIES, 0000130874 260 RUE DU CHENE VERT LABEGE, 66 FR, 78204 TEL: 33 561 000450 FAX: 33 561 000450 Class: A SUBCONTRACTORS JEDTCO CORP., 0000108782 5899 EXECUTIVE DR. E. WESTLAND, MI US, 48185-1932 TEL: 734-326-3010 FAX: 734 326 0194 Class: C MANUFACTURER JEFF BONNER R & D INC., 0000118863 10525 MOPAC DR. SAN ANTONIO, TX US, 78217-3827 TEL: 210 590 3133 FAX: 210 590 3155 Class: A SUBCONTRACTORS C MANUFACTURER JEHIER S.A. HUTCHINSON AEROSPACE, 0000117114 Z.I. DE LA GARE, ROUTE DE ST-LEZIN CHEMILLE, 49 FR, 49120 TEL: 241 64 54 00 FAX: 241 64 54 01 Class: B EQUIPMENT SUPPLIERS JET AVIATION ST-LOUIS, 0000103276 6400 CURTISS-STEINBERG DR. CAHOKIA, IL US, 62206-1458 TEL: 618-646-8397 FAX: 618-646-8861 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval RO3R822L & EASA dual approval EASA.145.4676. JET AVIONICS AVIATION, 0000107921 HANGAR 109 CIAMPINO AIRPORT ROMA, RM IT, 00040 TEL: 6 793 40566 FAX: 6793 40697 Class: E MAINTENANCE ORGANIZATION Specification Controlled: BAPS 188-08 MACHINING OF COMPOSITES Page 409 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval JET BRELLA INC., 0000111056 6849 HAYVENHURST AVE. VAN NUYS, CA US, 91406-4718 TEL: 818-780-1769 FAX: 818-994-9456 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods JET MALL LLC, 0000127917 13013 WILDCAT WAY N. BURLESON, TX US, 76028 TEL: 817 602 9440 FAX: 817 293 6390 Class: E MAINTENANCE ORGANIZATION JET-LUBE INC., 0000128934 4849 HOMESTEAD ROAD, SUITE 232 HOUSTON, TX US, 77028 TEL: 713 674 7617 FAX: 713 678 4604 Class: C MANUFACTURER JETSEAL INC *CC, 0000131870 1024 N RALPH ST. SPOKANE, WA US, 99202 TEL: 509 467 9133 FAX: 509 467 9028 Class: B EQUIPMENT SUPPLIERS JEWELL INSTRUMENTS, LLC, 0000101613 850 PERIMETER ROAD MANCHESTER, NH US, 03103-3324 TEL: 603 669 6400 FAX: 603 669 5962 Class: B EQUIPMENT SUPPLIERS JF IMS, JAMES FISHER INSPECTION, FACTORY ROAD SANDYCROFT DEESIDE, CL GB, CH5 2QJ TEL: 1252 0058 FAX: 1252 5440 Class: A SUBCONTRACTORS Specification Controlled: BAPS 176-17 RADIOGRAPHIC INSPECTION PSPEC 305 RADIOGRAPHIC EXAMINATION Class: A SUBCONTRACTORS Specification Controlled: PPS 20.03 PENETRANT FLAW DETECTION PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING JIANGXI HONGDU AIRCRAFT CORP., XINXIGIAO, NANCHANG JIANGXI P.R., 140 CN, 330024 0000108553 0000122057 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 410 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification TEL: 0791 8469210 FAX: 9999 9999999 Scope of Approval PPS PPS PPS PPS PPS PPS PPS PPS 30.01 30.02 31.02 32.01 32.03 34.03 34.08 34.41 HEAT TREATMENT OF ALUMINUM ALLOYS SUB-ZERO TREATMENT OF STEEL PARTS CLEANING PROCESSES OF ALUMINUM CROMATE CONVERSION COATING CHROMIC ACID ANODIZING (A1) APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) EPOXY PRIME APPLICATION OF EPOXY-POLYAMIDE ENAMEL (F22) JOANNE FABRICS, 0000110562 2610 SHERIDAN GARDEN DRIVE OAKVILLE, ON CA, L6J 7Z4 TEL: 800 268 2050 FAX: 905 829 0800 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods JOHN C DOLPH COMPANY, 0000132833 320 NEW ROAD MONMOUTH JUNCTION, NJ US, 08852-0267 TEL: 732 329 2333 FAX: 732 329 1143 Class: C MANUFACTURER JOHN HASSALL INC., 0000107118 609 CANTIAGUE ROCK ROAD WESTBURY, NY US, 11590-1721 TEL: 516 334 6200 FAX: 516 334 6343 Class: C MANUFACTURER JOHNS MANVILLE, 0000110359 408 PERRY ST. DEFINACE, OH US, 43512 TEL: 419-784-7064 FAX: 419 784 7097 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: See EMCM JOHNSON & HOFFMAN LLC., 0000123987 40 VOICE ROAD CARLE PLACE, NY US, 11514-1513 TEL: 516 742 3333-238 FAX: 516 742 4641 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to part no SS48152-K110 plug button and SS51043K2915 JOHNSON GAGE & INSPECTION INC., Class: 0000107620 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 411 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 5920 W. 21 ST. N. WICHITA, KS US, 67205-1722 TEL: 316 744 2274 FAX: 316 744 8102 A SUBCONTRACTORS JONATHAN ENGINEERED SOLUTIONS, 0000107120 410 EXCHANGE, SUITE 200 IRVINE, CA US, 92602-1328 TEL: 714-665-4400 FAX: 714-368-7002 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS JOSEPH NOBLE, 0000104810 2025 IRVING BLVD., SUITE 110 DALLAS, TX US, 75207-6617 TEL: 214 741 8100 FAX: 214 741 8102 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods JOSLYN SUNBANK CO. LLC., 0000102810 1740 COMMERCE WAY PASO ROBLES, CA US, 93446-3620 TEL: 805 238 2840-107 FAX: 805 238 0241 Class: C MANUFACTURER D DISTRIBUTOR JPB SYSTEME, 0000134952 CHEMIN DU BASSIN MONTEREAU SUR LE JARD, 77 FR, 77950 TEL: 33164797120 FAX: 514 855 5000 Class: C MANUFACTURER JPR SAS, 0000109127 1561 ANDRE DUROUCHEZ AMIENS, 80 FR, 80015 TEL: 3 22 52 60 47 FAX: 3 22 52 60 01 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: See EMCM. JPS COMPOSITE MATERIALS, Class: Systems with Limitations: 0000135862 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to part no 3301297 and the following : Limitation: 215-33192 Limitation: 215-33192-1 Limitation: 215-33198 Limitation: 215-33198-1 Limitation: 215t50949-2 Limitation: 215t50949 Page 412 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 101 SLATER ROAD SLATER, SC US, 29683 TEL: 864 260 3261 FAX: 514 855 5000 C MANUFACTURER JST CORP., 0000130760 1957 S. LAKESIDE DR. WAUKEGAN, IL US, 60085 TEL: 800 947 1110 FAX: 847 473 1373 Class: H COMMERCIAL OFF THE SHELF JUDD WIRE INC., 0000107776 124 TURNPIKE ROAD TURNERS FALLS, MA US, 01376-2609 TEL: 800 545 5833 FAX: 413 863 2305 Class: C MANUFACTURER JW ALUMINUM COMPANY, 0000129643 2475 TRENTON AVE. WILLIAMSPORT, PA US, 17701 TEL: 570 323 4430 FAX: 570 321 8602 Class: C MANUFACTURER K-FLEX USA, 0000123962 100 NOMACO DR. YOUNGSVILLE, NC US, 27596-9133 TEL: 800 765 6475 FAX: 800 765 6471 Class: H COMMERCIAL OFF THE SHELF K. N. PRODUCTS LTD., 0000118982 UNIT 48, ENFIELD INDUSTRIAL ESTATE REDDITCH, WC GB, B97 6DE TEL: 01527 67999-208 FAX: 0152760183 Class: C MANUFACTURER KAISER ALUMINIUM ALEXCO, 0000108505 6520 W. ALLISON CHANDLER, AZ US, 85226-5214 TEL: 866-525-3926 FAX: 520 796 1214 Class: C MANUFACTURER Scope of Approval 0000 GENERAL LIMITATION / REMARKS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 413 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval KAISER ALUMINUM FABRICATED, 0000108893 6573 W. WILLIS ROAD BOX NO.5011 CHANDLER, AZ US, 85226-5180 TEL: 520 796 1097 FAX: 520 796 0596 Class: C MANUFACTURER KAISER ALUMINUM FABRICATED, 0000107124 15000 E. EUCLID SPOKANE VALLEY, WA US, 99216 TEL: 509-927-6221 FAX: 214 775 0401 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM KAISER ALUMINUM FABRICATED, 0000108354 4300 HWY. 75 S. SHERMAN, TX US, 75090-9311 TEL: 903 892 5820 FAX: 903 868 1826 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM KAKAMIGAHARA AERO EQUIPMENT CO. LTD, 3-6 SOHARA KOWA-MACHI KAKAMIGAHARA CITY, 21 JP, 5040814 TEL: 58 382 1152 FAX: 58 382 2801 Class: A SUBCONTRACTORS Specification Controlled: BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING BAPS 145-004 INSTALLATION OF MECHANICALLY ATTACHED TERMINALS BAPS 145-006 TERMINATION OF THE SHIELD ON SHIELD ON SHIELDED WIRE AND CABLE BAPS 145-008 STOWAGE OF ELECTRICAL WIRING AND CONNECTORS BAPS 172-12 TINNING AND SOLDERING MPS 145-25 CERTIFICATION OF CRIMPING TOOL OPERATORS 0000132611 KALISTRUT AEROSPACE, 0000132491 1 AVE. MARC SEGUIN ST VALLIER, 26 FR, 26240 TEL: 33 4 75034420 FAX: 33 4 75034004 Class: B EQUIPMENT SUPPLIERS KALOGRIDIS INTERNATIONAL LTD., 0000101922 4819 MAPLE AVE. DALLAS, TX US, 75219-1006 TEL: 214 637 0519 FAX: 214 637 3226 Class: C MANUFACTURER Page 414 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval KAMAN AEROSPACE, 0000131977 227 GUN CLUB RD JACKSONVILLE, FL US, 32218 TEL: 904 485 1476 FAX: 904 607-6269 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-5F FUELS, LUBRICANTS, SOLVENTS (FORMERLY IE) BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS CAPTIVE LABORATORY KAMAN AEROSPACE CORP., 0000129572 9403 BLVD. FUENTES MARES CHIHUAHUA, CHI MX, 31064 TEL: 6143801406 FAX: 904 485 1532 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION CAPTIVE LABORATORY PPS 01.02 FORMING ALUMINUM ALLOYS PPS 20.07 CONDUCTIVITY TESTING Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: Limited for aluminum alloys BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: -Solution Heat Treatment at 860 °F to 985 °F, of Aluminum Sheet and Plate, CLAD and BARE Limitation: Material, 0.020 inch to 0.080 inch, in oven KMN-1218501. Page 415 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Limitation: -Natural Aging (Room) and Artificially Aging at 250 °F to 375 °F, Aluminum Sheet and Plate, Limitation: CLAD and BARE Material, 0.020 inch to 0.080 inch, in oven KMN-1201338. PPS 20.08 HARDNESS TESTING Limitation: Limited to Rockwell Hardness Testers KAMAN INTEGRATED STRUCTURES AND, 0000133486 780 WHITTAKER ROAD JACKSONVILLE, FL US, 32218 TEL: 904 485 1410 FAX: 904 714 0288 Class: A SUBCONTRACTORS Specification Controlled: BAPS 157-27 INTEGRAL FUEL TANK SEALING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 157-32 HIGH TEMPARATURE SEALING FOR NON -FUEL TANK APPLICATIONS Specification Controlled with Limitations: BAPS 136-120 POLISHING OF ALUMINUM ALLOY SKIN Limitation: sanding using silicon carbides abrasive paper is not permitted BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Touch up only BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: safety cable method only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual riveting only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Touch up only (prep-pen or Alodine 600RTU) BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Touch up only (Alodine 600RTU) KAMATICS CORP., 0000101179 1330 BLUE HILLS AVE. BLOOMFIELD, CT US, 06002-5303 TEL: 860-243-7834 FAX: 860-243-7993 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER KANATA ELECTRONIC SERVICES LTD., 20 BAYWOOD ROAD, UNIT 1 ETOBICOKE, ON Class: A SUBCONTRACTORS 0000107777 Page 416 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval CA, M9V 4A8 TEL: 416 745 0688 FAX: 416 748 3452 KANSAS COIL SPRING CO., 0000101371 4310 SOUTHEAST BLVD. WICHITA, KS US, 67210-1619 TEL: 316 652 7113 FAX: 316 652 7315 Class: A SUBCONTRACTORS KANSAS FIRE EQUIPMENT CO. INC., 0000100839 123 S. OSAGE WICHITA, KS US, 67213-4714 TEL: 316-262-8943 FAX: 316-264-4461 Class: D DISTRIBUTOR KANSAS PLASTICS CO., 0000107623 32 CLARK AVE. WELLINGTON, KS US, 67152-9797 TEL: 620 326 5007 FAX: 620 326 5601 Class: A SUBCONTRACTORS KAPCO, 0000107981 37 WOOLMER WAY BORDON, HA GB, GU35 9QE TEL: 714 223 5413 FAX: 01420 482900 Class: D DISTRIBUTOR KAPCO GLOBAL, 0000105667 10601 STATE STREET, SUITE 1 TAMARAC, FL US, 33321 TEL: 714-986-5640 FAX: 714-986-5688 Class: D DISTRIBUTOR KATO FASTENING SYSTEMS INC., 0000107956 11864 FISHING POINT DR. NEWPORT NEWS, VA US, 23606-4507 TEL: 757 873 8980 FAX: 757 873 4920 Class: C MANUFACTURER KEARFOTT GUIDANCE, 2858 US HWY. 70 Class: B EQUIPMENT SUPPLIERS 0000100171 Page 417 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BLACK MOUNTAIN, NC US, 28711 TEL: 828 686 3811 FAX: 828 686 5764 KEC LTD., 0000108029 5 ORPHEUS HOUSE CALLEVA PARK ALDERMAS READING, BK GB, RG7 8TA TEL: 1189 811571 FAX: 1189 811570 Class: C MANUFACTURER KEIGHLEY LABORATORIES LTD., 0000127130 CROFT HOUSE, SOUTH ST. KEIGHLEY, YW GB, BD21 1EG TEL: 01535 664211 FAX: 01535 680604 Class: A SUBCONTRACTORS KELLSTROM MATERIALS, 0000136316 450 MEDINAH ROAD ROSELLE, IL US, 60172 TEL: 847 233 5800 FAX: 847 233 5900 Class: D DISTRIBUTOR KELLY MFG. CO., Class: 0000101000 Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-5A CORROSION TESTING INDEPENDANT LABORATORY Page 418 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 555 TOPEKA S. WICHITA, KS US, 67202-4418 TEL: 316 265 6868 FAX: 316 265 6687 B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION KELOWNA FLIGHTCRAFT, 0000108531 5655 KELOWNA AIRPORT KELOWNA, BC CA, V1V 1S1 TEL: 250 491 55472 FAX: 250 765 1489 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Canadian AMO approval 16-82 & EASA dual approval EASA.145.7040. KEMET DE MEXICO S.A. DE C.V., 0000125216 AV. CARLOS SALAZAR Y BLVD. MATAMOROS, TMS MX, 87380 TEL: 864 228 4335 FAX: 864 228 4264 Class: C MANUFACTURER KEMET DE MEXICO S.A. DE C.V., 0000125217 AV. ELOY CAVAZOS 7908 OTE. GUADALUPE, NL MX, 67150 TEL: 864 228 4335 FAX: 864 228 4264 Class: C MANUFACTURER KEMET DE MEXICO S.A. DE C.V., 0000125218 ANTIGUO CAMINO AL MEZQUITAL NO. 100 SAN NICOLAS DE LOS GARZA, NL MX, 66490 TEL: 864 228 4335 FAX: 864 228 4264 Class: C MANUFACTURER KEMET ELECTRONICS CORP., 0000103297 2835 KEMET WAY SIMPSONVILLE, SC US, 29681-6202 TEL: 864-963-6413 FAX: 864 963 6322 Class: C MANUFACTURER KEMFAST P.A.S.S LTD., 0000121062 16 PRINCE REGENT ROAD, UNIT 2 BELFAST, BL GB, BT5 6QR TEL: 02890 793444 FAX: 02890 794333 Class: A SUBCONTRACTORS C MANUFACTURER D DISTRIBUTOR Specification Controlled: BAERD-GEN-030 GENERAL REQUIREMENT FOR RE-PACKAGING OF PAINTS INTO SIDE BY SIDE TOUCH-UP KITS Specification Controlled with Limitations: PPS 10.21 CERTIFICATION OF AUTOCLAVES Page 419 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Limitation: Limited to the preparation of test panels only. KENNAMETAL FIRTH STERLING, 0000108899 1297 COUNTY LINE ROAD MADISON, AL US, 35756-8014 TEL: 256 464 7500 FAX: 800 221 1895 Class: C MANUFACTURER KENNAMETAL STELLITE, 0000130635 1201 EISENHOWER DR. N. GOSHEN, IN US, 46526 TEL: 574 534 2585 FAX: 574 534 3417 Class: C MANUFACTURER KERN - LIEBERS LTD, 0000117747 CORRINGHAM ROAD, INDUSTRIAL GAINSBOROUGH, LA GB, DN21 1QB TEL: 142 7612 085 FAX: 8703 333513 Class: C MANUFACTURER KERN ENGINEERING & MFG. CORP., 0000108534 13912 MOUNTAIN AVE. CHINO, CA US, 91710-9018 TEL: 909 664 2440 FAX: 909 548 2287 Class: C MANUFACTURER KEYSTONE ELECTRONICS CORP., 0000103686 3107 20TH ROAD ASTORIA, NY US, 11105-2017 TEL: 718 956 8900 FAX: 718 956 9040 Class: C MANUFACTURER KEYSTONE PROFILES LTD., 0000108975 220 SEVENTH AVE. BEAVER FALLS, PA US, 15010-3274 TEL: 800-777-1533 FAX: 724-506-1512 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limitation: as listed in EMCM Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to AMS 4340 in 2' X 6' Bar Limitation: FOR LEARJET PROGRAMS ONLY) Limitation: Limited to AMS 4340 in 2' X 6' Bar Limitation: FOR LEARJET PROGRAMS ONLY) Limitation: Limited to 4130 Al. Bar AMS-S-6758 . Page 420 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval KGS ELECTRONICS, 0000101155 418 E. LIVE OAK AVE. ARCADIA, CA US, 91006-5619 TEL: 626 574 1175 FAX: 626 574 0553 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER E MAINTENANCE ORGANIZATION Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval K3GR925J & EASA dual approval EASA.145.4460. KIDDE AEROSPACE, 0000100405 4200 AIRPORT DR. N.W., BLDG. B WILSON, NC US, 27896-8630 TEL: 252 246 7112 FAX: 252 246 7185 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER E MAINTENANCE ORGANIZATION Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval YZ4R692M & EASA dual approval EASA.145.4718. KIDDE GRAVINER LTD., 0000103833 MATHISEN WAY POYLE ROAD COLNBROOK SLOUGH, BK GB, SL3 OHB TEL: 01753 766284 FAX: 01753 685126 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: EASA approval UK.145.00880 & FAA Repair Station dual approval K35Y190Y. KIEPURA AVIATION CORP., 0000108031 61 CHURCH ST. LITTLETON, NH US, 03561-4702 TEL: 603 444 3459 FAX: 603 444 0790 Class: D DISTRIBUTOR KIGASS AERO COMPONENTS LTD., 0000117727 MONTAGUE ROAD WARWICK, WA GB, CV34 5LW TEL: 01926 493833 FAX: 011926 401456 Class: A SUBCONTRACTORS KILGOUR INDUSTRIES, 0000136505 KILGOUR HOUSE, RED MARSH DRIVE, RED MARS THORNTON, CLEVELEYS, LA GB, FY5 4HR TEL: 44 0 1253821953 FAX: 514 855 5000 Class: A SUBCONTRACTORS Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual riveting BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Limited to faying sealing surfaces, wet installation of fasteners & fillet sealing of bushings/bearings BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Limitation: Limited to Roller Swaging of the following Page 421 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Bearings MS14103A-6CE, MS14103A-8CE & MS14103A-10CE BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limited to the installation of interference fit bushings using liquid nitrogen only KILGOUR TREATMENTS LTD., 0000126206 HOLLY CLOSE THORNTON CLEVELEVS, LA GB, FY5 4LR TEL: 1253 864609 FAX: 1253 852237 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 161-007 APPLICATION OF MIL-L-46010 SOLID FILM LUBRICANT BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.05 SURFACE TREATMENTS OF CORROSION RESISTANT STEELS PPS 31.09 CLEANING OF TITANIUM PPS 32.01 CROMATE CONVERSION COATING PPS 32.02 MANUAL APPLICATION OF CHEMICAL CONVERSION COATINGS PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME Page 422 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to Type 2 Alocrom 1132 Pen ONLY. KING & FOWLER LTD., 0000110012 BRUNSWICK BUSINESS PARK HARRISON WAY, MY GB, L3 4BG TEL: 1517 098411 FAX: 1517 092622 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 176-14 NITAL ETCH INSPECTION OF STEEL PARTS BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS MPS 160-08 CADMIUM PLATING OF CARBON AND LOW ALLOY STEELS BELOW 220,000PSI, COPPER ALLOYS AND CRES STEELS PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION PPS 20.05 ETCH INSPECTION OF LOW ALLOY STEELS PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.03 PRE CLEANING OF STEELS PPS 31.05 SURFACE TREATMENTS OF CORROSION RESISTANT STEELS PPS 32.01 CROMATE CONVERSION COATING PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 33.01 CADMIUM PLATING (E1) PPS 33.04 HARD CHROMIUM PLATE PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME Page 423 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PSPEC 300 PSPEC 301 PSPEC 303 PSPEC 403 STEELS PSPEC 410 PSPEC 416 STEELS PSPEC 419 ALUMINIUM PSPEC 910 PENETRANT FLAW DETECTION MAGNETIC PARTICLE INSPECTION ETCH INSPECTION OF STEELS CADMIUM PLATING OF CARBON, LOW ALLOY AND STAINLESS CHROMIC ACID ANODISING PASSIVATION OF AUSTENITC, MARTENSITIC AND PH CHEMICAL CONVERSION COATING OF ALUMINIUM AND ALLOYS ETCH AND EPOXY PRIMING Specification Controlled with Limitations: BAPS 168-15 STRESS RELIEF OF METALS Limitation: Limited to de-embrittlement (NADCAP approval not required) PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS Limitation: Heat treatment limited to stress and embrittlement relief. KINNEAR REMBOURRAGE INC, 0000110926 1289-A MONTEE LEGER LES CEDRES, QC CA, J7T 1E9 TEL: 450 452 0336 FAX: 450 452 0337 Class: A SUBCONTRACTORS G INDIRECT PRODUCT Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limitation to classification "A" for Upholstery product only . Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: limited to non-intrusive method only KIRKHILL AIRCRAFT PARTS CO (KAPCO), 3120 ENTERPRISE ST. E. BREA, CA US, 92821-6237 TEL: 714986-5664 FAX: 860 767 2918 0000101835 Class: D DISTRIBUTOR KIRKHILL AIRCRAFT PARTS CO (KAPCO), 11300 FORTUNE CIR. WELLINGTON, FL US, 33414-8723 0000102046 Class: D DISTRIBUTOR Page 424 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 561 791 4294 FAX: 561 309 8937 KIRKHILL AIRCRAFT PARTS CO., 0000124706 1 ESSEX INDUSTRIAL PARK ESSEX, CT US, 06426 TEL: 714 986-5664 FAX: 714 223 5589 Class: C MANUFACTURER KIRKHILL-TA CO., 0000102704 28065 W. FRANKLIN PKWY. VALENCIA, CA US, 91355-4117 TEL: 661-775-1113 FAX: 661 775 1155 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER KIRKHILL-TA MFG. CO., 0000100841 300 CYPRESS CT. E. BREA, CA US, 92821-4097 TEL: 714 529 4901-... FAX: 714 529 6584 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM KITTY HAWK PROD., 0000108812 11651 MONARCH ST. GARDEN GROVE, CA US, 92841-1816 TEL: 714 895 5024 FAX: 714 893 8709 Class: A SUBCONTRACTORS Specification Controlled: LES 1329 HOT ISOSTATIC PRESSING OF STAINLESS STEEL CASTINGS KLEENEZE SEALTECH LTD., 0000117728 ANSTEYS ROAD HANHAM, BR GB, BS15 3SS TEL: 01179 475149 FAX: 01179 600141 Class: C MANUFACTURER KLINGER LTD., 0000108732 THE KLINGER BLDG. WHARFEDALE ROAD BRADFORD, YW GB, BD12 8RD TEL: (0)1274 688222 FAX: 1274 688549 Class: C MANUFACTURER KLUBER LUBRICATION NORTH AMERICA LP, 32 INDUSTRIAL DR. LONDONDERRY, NH 0000115905 Class: C MANUFACTURER Page 425 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval US, 03053-2008 TEL: 603-206-0825 FAX: 603-647-4106 KLUNE INDUSTRIES INC., 0000107779 7323 COLDWATER CANYON AVE. N. HOLLYWOOD, CA US, 91605-4206 TEL: 818 299-9051 FAX: 818 503 8131 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS PPS 01.02 FORMING ALUMINUM ALLOYS PPS 01.03 HOT JOGGLING OF ALUMINUM ALLOYS PPS 01.13 LASER CUTTING TITANIUM PPS 01.36 FORMING OF TITANIUM AND TITANIUM ALLOYS PPS 20.03 PENETRANT FLAW DETECTION PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS PPS 25.52 EC-2216 B/A GREY ADHESIVE PPS 34.08 EPOXY PRIME PPS 37.03 FUSION WELDING OF ALUMINUM AND ALUMINUM ALLOYS PPS 37.04 FUSION WELDING OF FERROUS AND NICKEL ALLOYS PPS 37.06 TESTING AND APPROVAL OF AIRCRAFT WELDERS PPS 37.10 REQUIREMENTS FOR FUSION WELDS PSPEC 300 PENETRANT FLAW DETECTION PSPEC 301 MAGNETIC PARTICLE INSPECTION PSPEC 305 RADIOGRAPHIC EXAMINATION PSPEC 801 MANUAL INSTALLATION AND REMOVAL OF SOLID RIVETS PSPEC 910 ETCH AND EPOXY PRIMING Specification Controlled with Limitations: BAPS 172-34 FUSION WELDING Limitation: Limitation to: GTAW on Group IV BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Limitation: Limitation to: Type 1, Method A KLUNE INDUSTRIES INC., 0000101576 1800 NORTH 300 WEST SPANISH FORK, UT US, 84660-9504 TEL: 912-777-4979 FAX: 818 358 5612 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-4E TESTING OF WEAR AND ABRASION PROPERTIES BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Page 426 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS CAPTIVE LABORATORY LES 1004 PENETRANT INSPECTION LES 1006 INSPECTION, MAGNETIC PARTICLE LES 1016 HEAT TREATMENT OF STEEL ALLOYS LES 1047 CHEMICAL FILM TREATMENT, APPLICATION OF - ALUMINUM ALLOYS PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION PPS 20.08 HARDNESS TESTING PPS 21.21 GENERAL SEALING PRACTICES PPS 30.06 PRECIPITATION HARDENABLE (PH) STAINLESS STEEL PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.05 SURFACE TREATMENTS OF CORROSION RESISTANT STEELS PPS 32.01 CROMATE CONVERSION COATING PPS 32.04 HARD ANODIZING (A2) PPS 32.05 SULPHURIC ACID ANODISING PPS 32.09 APPLICATION OF DRY FILM LUBRICANTS (C3, C7 AND C8) PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PPS 34.35 APPLICATION OF POWDER COATINGS (F28) PPS 34.41 APPLICATION OF EPOXY-POLYAMIDE ENAMEL (F22) PSPEC 401 HEAT TREATMENT OF ALUMINIUM AND ALUMINIUM ALLOYS Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limitation to Manual riveting ONLY . BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: BAPS 160-020 Type 2 with limitation to Alodine 1132 "Touch & Prep Pen " for repaired area Limitation: not exceeding four square inches . PPS 01.08 MAGNETIC PULSE FORMING OF END FITTINGS TO TUBES Limitation: PROCESS PERFORMED AT MAXWELL FACILITY WITH KLUNE Page 427 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification KLX AEROSPACE SOLUTIONS, 0000100419 10000 N.W. 15TH TERRACE MIAMI, FL US, 33172-2754 TEL: 316 630 4917 FAX: 310 900 1319 Class: D DISTRIBUTOR KLX AEROSPACE SOLUTIONS, 0000101264 10900 E. 26TH ST. NORTH WICHITA, KS US, 67226 TEL: 1-514-693-232... FAX: 1-800-631-320 Class: D DISTRIBUTOR KNIGHT STRIP METALS LTD., 0000107137 KNUWAY HOUSE/CRAN.ROAD/POTTERS BAR HERTFORDSHIRE, AM GB, EN6 3JL TEL: 1707 650 251 FAX: 1707 651 238 Class: D DISTRIBUTOR KNUTH HINGE CO., 0000105776 561 SCOBIE ST. MONTAGUE, CA US, 96064 TEL: 530 459 3451 FAX: 530 459 5663 Class: H COMMERCIAL OFF THE SHELF KOBE STEEL LTD., 0000108425 1100 UMEDO DAIAN-CHO INABE-GUN, 24 JP, 5110284 TEL: 5947 70330 FAX: 5947 72249 Class: C MANUFACTURER KOEHLER BRIGHT STAR LLC, 0000107909 380 STEWART ROAD WILKES-BARRE, PA US, 18706-1459 TEL: 800-788-1696 FAX: 570-825-7108 Class: C MANUFACTURER KOIKE SEISAKUSHO CO., LTD., 0000108141 103 ARIMATSU-MINAMI, MIDORI-KU NAGOYA, 45 JP, 4598004 Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Specification Controlled: BAPS 185-01 BARREL AND VIBRATORY FINISHING Page 428 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 52 623 6112 FAX: 052 623-6174 KOLLMANS INC., 0000101661 108 ALLEN STREET TALLADEGA, AL US, 35160 TEL: 800 772 9602 FAX: 256 480 2484 Class: E MAINTENANCE ORGANIZATION KOLLMORGEN, 0000131574 501 WEST MAIN STREET RADFORD, VA US, 24141 TEL: 540 731 5668 FAX: 540 731 5679 Class: C MANUFACTURER KOLLSMAN INC., 0000100835 220 DANIEL WEBSTER HWY. S. MERRIMACK, NH US, 03054-4898 TEL: 603 886 2559 FAX: 603 886 2055 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval PZ1R418K & EASA dual approval EASA.145.5071. KOREA HEAT TEATMENT, 0000136323 383, PARYONG-RO, UICHANG-GU CHANGWON-SI, GYEONGSANGNAM-DO, 01 KR, 641-465 TEL: 82 55 296 4881 FAX: 82 55 294 5123 Class: A SUBCONTRACTORS Specification Controlled with Limitations: PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS KOREAN AEROSPACE INDUSTRIES LTD., 78 GONGDAN 1-RO SANAM MYUN SACHEON CITY, 08 KR, 664-710 TEL: 55 851 1348 FAX: 55 851 1127 Class: F STRUCTURAL SUPPLIER Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM 0000107816 Page 429 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-4D TESTING OF FLAMMABILITY PROPERTIES BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 155-074 STRUCTURAL ADHESIVE BONDED ASSEMBLIES FOR USE UP TO 180 DEGREE F (250 DEGREE F CURE) BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... CAPTIVE LABORATORY PPS 10.21 CERTIFICATION OF AUTOCLAVES PPS 10.35 FABRICATION OF 250 F CURE, EPOXY RESIN PRE-IMPREGNATED, FIBRE REINFORCED COMPOSITE PARTS PPS 17.03 SHOT PEENING PPS 17.04 SHOT PEEN FORMING PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION PPS 20.06 ULTRASONIC INSPECTION OF FIBRE REINFORCED COMPOSITE PARTS - CERTIFIED PERSONNEL REQUIRED PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS PPS 30.03 HEAT TREATMENT AND CONTROL OF 2024 (DD) RIVETS PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS Page 430 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PPS 30.08 STEEL HEAT TREATMENT - MARTENSITIC STAINLESS STEEL PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.05 SURFACE TREATMENTS OF CORROSION RESISTANT STEELS PPS 32.01 CROMATE CONVERSION COATING PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 32.09 APPLICATION OF DRY FILM LUBRICANTS (C3, C7 AND C8) PPS 33.01 CADMIUM PLATING (E1) PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PPS 34.19 APPLICATION OF F14 ANTI-STATIC COATING PPS 34.41 APPLICATION OF EPOXY-POLYAMIDE ENAMEL (F22) PPS 36.10 METAL BONDING OF DE HAVILLAND PARTS TO BAC 5555 AND BAC 5514 PPS 37.03 FUSION WELDING OF ALUMINUM AND ALUMINUM ALLOYS PPS 37.04 FUSION WELDING OF FERROUS AND NICKEL ALLOYS PSPEC 213 FORMING OF ALUMINUM ALLOYS PSPEC 401 HEAT TREATMENT OF ALUMINIUM AND ALUMINIUM ALLOYS PSPEC 410 CHROMIC ACID ANODISING PSPEC 419 CHEMICAL CONVERSION COATING OF ALUMINIUM AND ALUMINIUM ALLOYS PSPEC 420 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS PSPEC 706 CHEMICAL MILLING OF ALUMINIUM ALLOYS PSPEC 910 ETCH AND EPOXY PRIMING QAMTR 034 NON DESTRUCTIVE TESTING REQUIREMENT FOR DASH-8 LEADING EDGES WITH COLD BOUNDED ICER BOOTS KOREAN AIR, 0000137115 260, HANEUL-GIL, GANGSEO-GU SEOUL, 13 KR, 007-505 TEL: 514 855 5000 FAX: 514 855 5000 Class: J LOGISTIC PROVIDER KORRY ELECTRONICS CO., 0000100980 11910 BEVERLY PARK ROAD EVERETT, WA US, 98204-3529 TEL: 425 297 9662 FAX: 425 297 9870 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER KOSS AEROSPACE, 0000101822 7805 TRANMERE DR. Class: A SUBCONTRACTORS Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Page 431 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification MISSISSAUGA, ON CA, L5S 1V5 TEL: (905) 364-500... FAX: 905 364 4999 Learjet Approved Suppliers Scope of Approval Specification Controlled: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 185-01 BARREL AND VIBRATORY FINISHING PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN PPS 21.21 GENERAL SEALING PRACTICES PPS 25.14 GENERAL ELECTRIC PSA529/SRC-18 SILICONE BASE ADHESIVE PPS 25.55 EC-1357N ADHESIVE Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to surface preparation only. KOSWIRE INC., 0000133856 4600 CANTRELL ROAD FLAWERY BRANCH, GA US, 30542 TEL: 770 965 1145 FAX: 770 965 1147 Class: A SUBCONTRACTORS KOYO BEARINGS U.S.A. LLC, 0000109029 430 TORRINGTON ROAD WALHALLA, SC US, 29691 TEL: 864-718-2312 FAX: 864-638-2434 Class: C MANUFACTURER KOYO BEARINGS US LLC, 0000108300 400 FRIENDSHIP ROAD SYLVANIA, GA US, 30467-2647 TEL: 912 564 7151 FAX: 912 564 2101 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Learjet Programs Only Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF KOYO KINZOKU NETSUREN KOGYOSHO CO., 38 KICHIJYOIN-IKEDA-CHO 0000120680 Page 432 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification MINAMI-KU, 26 JP, 6018349 TEL: 075 671 7121 FAX: 075 691 7498 Scope of Approval METALS BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS KRAVET, 0000102125 285 CENTRAL AVE. S. BETHPAGE, NY US, 11714 TEL: 516-293-2000 FAX: 800-355-3434 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods KRAVET FABRICS CANADA, 0000110566 3600 B LAIRD ROAD, SUITE 6 MISSISSAUGA, ON CA, L5L 6A7 TEL: 800-535-3258 FAX: 800-355-3434 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods KRAYDEN INC., 0000104406 1491 W 124TH AVE. WESTMINSTER, CO US, 80234-1701 TEL: 303 280 2800 FAX: 303 280 0178 Class: D DISTRIBUTOR KRISMARK GROUP INC., 0000108697 8020 BRACKEN PL. S.E. SNOQUALMIE, WA US, 98065-9257 TEL: 425 396 0829-221 FAX: 425 392 1995 Class: C MANUFACTURER KROSCHKE, 0000135381 KROSCHKESTRASSE 1 BRAUNSCHWEIG, 03 DE, 38112 TEL: 49 531 318318 FAX: 999 999 9999 Class: C MANUFACTURER KULITE SEMICONDUCTOR PRODUCTS, 0000110013 1 WILLOW TREE ROAD LEONIA, NJ US, 07605-2210 TEL: 316 773 6194 FAX: 201 461 0990 Class: B EQUIPMENT SUPPLIERS KULITE SEMICONDUCTOR PRODUCTS INC., Class: 0000117657 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Systems with Limitations: Page 433 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 2 WILLOW TREE ROAD LEONIA, NJ US, 07605-2209 TEL: 201-461-0900 FAX: 201-461-0990 E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval KU7R407Y & EASA dual approval EASA145.5178. KULITE SENSORS LTD., 0000110014 STROUDLEY ROAD KINGSLAND BUS. PARK BASINGSTOKE, HA GB, RG24 8UG TEL: 01256 461646 FAX: 01256 479510 Class: C MANUFACTURER KURI TEC MFG., 0000120882 2600 E. US HWY 41 WILLIAMSPORT, IN US, 47993 TEL: 765 764 6000 FAX: 765 764 6001 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to K3130 clearbraid PVC hose -Learjet Program only L'ELECTROLYSE SA, 0000110160 ZONE INDUSTRIELLE MAUCOULAIS LATRESNE, 33 FR, 33360 TEL: 33 5 5620 7440 FAX: 33 5 5620 0495 Class: A SUBCONTRACTORS Specification Controlled: PSPEC 410 CHROMIC ACID ANODISING PSPEC 910 ETCH AND EPOXY PRIMING L-3 COMMUNICATIONS, 0000110660 10000 HELEN-BRISTOL ST. MIRABEL, QC CA, J7N 1H3 TEL: 450 476 4000 FAX: 450 476 4463 Class: Systems with Limitations: A SUBCONTRACTORS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Specification Controlled: F STRUCTURAL SUPPLIER BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Specification Controlled with Limitations: Page 434 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limited to non intrusive marking only BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Lockwire and cutter pins ONLY BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING Limitation: Limited to touch up only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to prep pen 1132 only BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: No heating of housings permitted BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL Limitation: Type II ONLY (manual application) L-3 COMMUNICATIONS, 0000102789 100 CATTLEMEN ROAD SARASOTA, FL US, 34232-6307 TEL: 941 371 0811-... FAX: 941 377 5591 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval LD7R612J & EASA dual approval EASA.145.4620. L-3 COMMUNICATIONS, 0000101504 3975 MCMANN ROAD CINCINNATI, OH US, 45245 TEL: 513 943 2439 FAX: 513 943 2050 Class: B EQUIPMENT SUPPLIERS L-3 COMMUNICATIONS AVIONICS, 0000100948 5353 52ND ST. S. E. GRAND RAPIDS, MI US, 49512-9704 TEL: 616 949-6600 FAX: 616 946-6600 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval NN2R037L & EASA dual approval EASA.145.4260. L-3 COMMUNICATIONS AVIONICS SYSTEMS, 5250 33RD AVE. N. W. FORT LAUDERDALE, FL US, 33309-6364 TEL: 954 497 0100 FAX: 954 497 0190 0000100464 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval UL2R217L & EASA dual approval EASA.145.4261. L-3 COMMUNICATIONS ELECTRONIC SYSTE, 0000102935 Class: Page 435 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 25 CITYVIEW DR. TORONTO, ON CA, M9W 5A7 TEL: 416-249-1231 FAX: 416-246-2001 L-3 COMMUNICATIONS INTEGRATED SYSTE, 5486 FAIRCHILD ROAD CRESTVIEW, FL US, 32536 TEL: 850 682 2746 FAX: 850 682 7411 Learjet Approved Suppliers Scope of Approval B EQUIPMENT SUPPLIERS 0000131907 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Limitation to Type I only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation to type II only - touch-up with prep-pen BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limitation to cold installation only BAPS 185-01 BARREL AND VIBRATORY FINISHING Limitation: Limited to aluminium, flat or low curvature profiles L-COM INC., 0000104674 45 BEECHWOOD DR. Class: C MANUFACTURER Page 436 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval NORTH ANDOVER, MA US, 01845-1023 TEL: 978 984 9700 FAX: 978 689 9484 L.M.A. S.R.L., 0000128995 VIA VERCELLI 6 PIANEZZA, TO IT, 10144 TEL: 390119 663 301 FAX: 390119 673 051 Class: A SUBCONTRACTORS Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-15 STRESS RELIEF OF METALS BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 175-007 INSTALLATION OF THREADED RETAINER BEARINGS Specification Controlled with Limitations: BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Limited for varnish of ident only. L.M.C. LAVORAZIONE MATERIALI, 0000127809 VIA 11 SETTEMBRE 2001 N.40 MARIGLIANELLA, NA IT, 80030 TEL: 081 519 03 73 FAX: 081 886 37 56 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-45 APPLICATION OF CMS 565-12 CONDUCTIVE COATING TO PLASTIC SURFACES BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES BAPS 188-08 MACHINING OF COMPOSITES BAPS 260-017 AUXILIARY PROCESSING FOR COMPOSITES STRUCTURES CURED AT 350 DEGREE F BAPS 260-03 POTTING OF HONEYCOMB SANDWICH PANELS BAPS 260-04 FABRICATION OF 355 DEGREE F CURE GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS CAPTIVE LABORATORY Specification Controlled with Limitations: Page 437 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** Limitation: Limited to the acceptance and control of materials certified to Alenia NTA Specifications only. BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) Limitation: Limited to gel time determination BAERD-GEN-018-4C TESTING OF THERMAL PROPERTIES (EXPANSIONS, TMA, ETC.) Limitation: Limited to the acceptance and control of materials certified to Alenia NTA material Limitation: specifications. BAERD-GEN-018-5E EVALUATION OF PAINTS Limitation: Limited to Dry Film Thickness and Paint Adhesion (Tape test). BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Approved for non-intrusive ink marking identification of aircraft parts. BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Approval is limited to electrical bonding per: FAY MC02 section 10.2.1.2 of BAPS, AFA MC01 Limitation: section 10.2.2.1 of BAPS, AFA MC03 section 10.2.2.3 of BAPS & AFA CC section 10.3.1 of Limitation: BAPS. BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Approved for manual installation of conventional rivets only. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to Type II (Manual ) touch-up application for use in electrical bonding ONLY! BAPS 260-010 MACHINING, FORMING AND PREPARATION OF NON-METALLIC HONEYCOMB CORE FOR LAY-UP IN SANDWICH COMPONENTS Limitation: Limited to machining of Class B and Class C autoclave cores only. L.P. AERO PLASTICS INC., 0000110623 Class: Page 438 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address 1086 BOQUET ROAD JEANNETTE, PA US, 15644-4707 TEL: 724 744 4448 FAX: 724 744 3116 LA COMPAGNIE ROBERT BURY & COMPANY, 3500 PITFIELD ST-LAURENT, QC CA, H4S 1W1 TEL: 514 735 3666 FAX: 514 746 0206 Classification Learjet Approved Suppliers Scope of Approval A SUBCONTRACTORS 0000127034 Class: H COMMERCIAL OFF THE SHELF LA DEAU MFG. CO., 0000107140 637 COLORADO ST. W. GLENDALE, CA US, 91204-1103 TEL: 818 240 3990 FAX: 818 240 1219 Class: C MANUFACTURER LA NITRURATION MODERNE, 0000132842 RUE GILLES GALLER 22-24 LIEGE, 07 BE, 4000 TEL: 514 855 5000 FAX: 514 855 5000 Class: LABARGE INC., 0000108833 11616 E. 51 ST. Class: C MANUFACTURER Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-34 ZINC-NICKEL ALLOY PLATING BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY Page 439 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TULSA, OK US, 74146-5911 TEL: 918 459 2200 FAX: 918 456 2221 LABARGE INC., 0000108802 1505 S. MAIDEN LANE JOPLIN, MO US, 64801-3819 TEL: (417) 781-3200 FAX: 417 781 0818 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION LABINAL, 0000125643 ZONE INDUSTRIELLE DU VAZZIO AJACCIO, 2A FR, 20090 TEL: 0 4 95 23 79 23 FAX: 04 95 23 79 29 Class: A SUBCONTRACTORS Specification Controlled: BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING BAPS 145-004 INSTALLATION OF MECHANICALLY ATTACHED TERMINALS BAPS 145-006 TERMINATION OF THE SHIELD ON SHIELD ON SHIELDED WIRE AND CABLE BAPS 145-008 STOWAGE OF ELECTRICAL WIRING AND CONNECTORS BAPS 172-12 TINNING AND SOLDERING LABINAL DE MEXICO S.A. DE C.V., 0000106683 NICOLAS GOGOL 11310 CHIHUAHUA, CHI MX, 31200 TEL: (614) 158-8170 FAX: (614) 158-8170 Class: A SUBCONTRACTORS Specification Controlled: BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT LABINAL LLC, 0000103616 2250 WHITFIELD AVE. SARASOTA, FL US, 34243-3926 TEL: 941 758 7726-8 FAX: 850 391 2293 Class: C MANUFACTURER LABORATOIRE ECCI, 0000108298 RUE DE BIELLE AEROPOLE PYRENEES, 64 FR, 64811 TEL: 5593 33880 FAX: 5593 33889 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM Page 440 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-5A CORROSION TESTING INDEPENDANT LABORATORY LADISH CO. CUDAHY FORGING, 0000108355 5481 S. PACKARD AVE. CUDAHY, WI US, 53110-2244 TEL: 414 747 3437 FAX: 414 747 3036 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM LAER S.R.L., 0000128363 VIA CARACCIANO 5 AIROLA, BN IT, 82011 TEL: 0823 951634 FAX: 0823 950234 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Approval is limited to oven ID# FVE.1 for a temperature range of 30°C - 50°C. BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: [FAY-MM] Faying Surface Bond only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR Page 441 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval ALUMINIUM ALLOYS Limitation: Type 2 Manual Application BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: Limited to solution heat treatment of 2024 Clad Aluminum in the furnace # FOB at 493 °C Limitation: with a thickness between 1.0 and 3.2 millimeters. BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS Limitation: Limited to the aging of 15-5PH steel, maximum thickness of 2.5mm (0.98 inches) using the Limitation: FOC furnace from 485°C to 552°C (905°F to 1026°F). BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limited to installation of bushings using liquid nitrogen only. LAFARGE & EGGE INC., 0000108169 5820 188TH ST. S.W. LYNNWOOD, WA US, 98037-4306 TEL: 425-778-4123 FAX: 425-778-2729 Class: A SUBCONTRACTORS LAIRD PLASTICS, 0000106542 301 E. WAKINS ST. PHOENIX, AZ US, 85004 TEL: 602 252 1701 FAX: 602 256 6069 Class: D DISTRIBUTOR LAKEFRONT MFG. INC., 0000107057 925 LAKEFRONT PROMENADE MISSISSAUGA, ON CA, L5E 2C3 TEL: 905 278 8777 FAX: 905 278 9780 Class: C MANUFACTURER E MAINTENANCE ORGANIZATION LAMECO, 0000126204 2 BIS RUE BLAISE PASCAL TRAPPES, 78 FR, 78190 Class: A SUBCONTRACTORS Specification Controlled: BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 174-16 ASSEMBLY AND INSTALLATION OF SIERRACIN/HARRISON SLEEVES AND UNIONS ON PLUMBING LINES BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES Page 442 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 1 30 686110 FAX: 1 30 681447 LAMINATED SHIM CO. INC., 0000101632 1691 CALIFORNIA AVE. CORONA, CA US, 92881-3375 TEL: 951 273 3900-210 FAX: 909 273 3919 Class: A SUBCONTRACTORS C MANUFACTURER LAMSCO WEST INC., 0000101407 29101 THE OLD ROAD VALENCIA, CA US, 91355 TEL: 661 295 8620-118 FAX: 661 295 8626 Class: A SUBCONTRACTORS C MANUFACTURER LANCASTER ALLOYS CO., 0000105633 42328 10TH ST. W. LANCASTER, CA US, 93534-7008 TEL: 661 723 1397 FAX: 661 723 1580 Class: C MANUFACTURER LANDREVILLE PROMOTIONS INC., 0000108299 3060 DE BAENE ST-LAURENT, QC CA, H4S 1L2 TEL: 514 856 2124 FAX: 514 856 2314 Class: A SUBCONTRACTORS LANTAL TEXTILES INC., 0000105832 1300 LANGENTHAL DR. RURAL HALL, NC US, 27045-9800 TEL: 800 334 3309-731 FAX: 336 969 3831 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to textile product only LASER INDUSTRIES INC., 0000107780 1351 MANHATTAN AVE. FULLERTON, CA US, 92831 TEL: 714 532 3271 FAX: 714 639 6941 Class: A SUBCONTRACTORS Specification Controlled: BAPS 188-05 LASER CUTTING OF METALS LATECOERE, 0000108119 135 RUE DE PERIOLE TOULOUSE, 31 Class: F STRUCTURAL SUPPLIER Systems with Limitations: 2101 MRB APPROVAL - MINOR ONLY Limitation: CRJ 700 Page 443 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification FR, 31079 TEL: 5 61 58 98 95 FAX: 561 589740 Learjet Approved Suppliers Scope of Approval Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limitation: Section 9.1.5 (BJP-MM / BST-MM) Jumpers / Straps BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING Limitation: Limitation: CRJ Baggage Door BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: LIMITED TO FURNACE 13001 ONLY . LIMITED TO 2XXXX SERIES ALUMINIUM ALLOYS ( SHEET,BAR,PLATE ,EXTRUSION) ONLY. BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS Limitation: DEVIATION 1631 BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Limitation: DEVIATION 1632 LAURENTIAN VANNES & RACCORDS, 0000107142 2425 HALPERN ST-LAURENT, QC CA, H4S 1S3 TEL: 514 332 3651-225 FAX: 514 332 4386 Class: D DISTRIBUTOR LAVI SYSTEMS INC., 0000128932 13731 SATICOY ST. VAN NUYS, CA US, 91402 TEL: 818-373-5400 FAX: 818-373-5401 Class: B EQUIPMENT SUPPLIERS LCR WESTPORT, 0000127657 615 POST ROAD E. Class: H COMMERCIAL OFF THE SHELF Page 444 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval WESTPORT, CT US, 06880 TEL: 203 221 8131 FAX: 203 221 7495 LE BRONZE INDUSTRIEL, 0000118112 ZI VOIE DE CHALONS SUIPPES, 51 FR, 51600 TEL: 3 2669 2828 FAX: 3 2670 1682 Class: C MANUFACTURER LE JOINT FRANCAIS, 0000107143 84-116 RUE SALVADOR ALLENDE BEZONS, 95 FR, 95870 TEL: 1 34 23 34 60 FAX: 1342 33496 Class: C MANUFACTURER LEACH INTERNATIONAL EUROPE S.A., 2 RUE GOETHE SARRALBE, 57 FR, 57430 TEL: 3879 79897 FAX: 3879 79686 0000107166 Class: C MANUFACTURER LEACH INTL., 0000102224 6900 ORANGETHORPE AVE. BUENA PARK, CA US, 90620-1351 TEL: 714-736-7309 FAX: 7146862056 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER LEADER GLOBAL TECHNOLOGIES, 0000122459 905 W. 13TH ST. DEER PARK, TX US, 77536-3163 TEL: 281 542 0600-... FAX: 281 542 5552 Class: C MANUFACTURER LEADER TECH, 0000132009 12420 RACE TRACK ROAD TAMPA, FL US, 33626 TEL: 813 855 6921 FAX: 813 855 3291 Class: C MANUFACTURER LEADING TECHNOLOGY COMPOSITES INC., 0000104097 Class: Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: Page 445 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address 2626 W. MAY WICHITA, KS US, 67213-1854 TEL: 316 944 0011 FAX: 316 944 0927 Classification A SUBCONTRACTORS Scope of Approval BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES BAPS 188-08 MACHINING OF COMPOSITES BAPS 260-010 MACHINING, FORMING AND PREPARATION OF NON-METALLIC HONEYCOMB CORE FOR LAY-UP IN SANDWICH COMPONENTS BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to installation of dimple washers and surface preparation of parts. LEAR CHEMICAL RESEARCH CORP., 0000108357 6182 KESTREL ROAD #A MISSISSAUGA, ON CA, L4Y 3W3 TEL: 905 564 0018 FAX: 905 564 0018 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM LEARJET INC., 0000600000 ONE LEARJET WAY, BLDG. 5, DOCK 1 WICHITA, KS US, 67209-2924 TEL: 316 946 2000 FAX: 316 946 2000 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-27 INTEGRAL FUEL TANK SEALING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE Page 446 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval FITTING ON PLUMBING LINES BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS BAPS 180-001 ALKALINE CLEANING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS PPS 21.21 GENERAL SEALING PRACTICES Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limited to noninvasive identification only BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Not Approved for Method 2 BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual Riveting only (no automatic riveting) BAPS 172-34 FUSION WELDING Limitation: Limeted to Gas Tungsten Arc Welding (GTAW) only BAPS 174-02 FABRICATION OF PLUMBING LINES Limitation: Not approved for double wall tubes, brazed rigid copper or hose assemblies BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Limitation: No Heating Parts aboe 400 Degrees Fahrenheit BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: For Aluminium Parts Only BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS Limitation: Unable to scan sandwich core material BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES Limitation: Approved only for product for which they have an APPROVED Technique Sheet BAPS 188-08 MACHINING OF COMPOSITES Limitation: Limited to Manual Trimming Only BAPS 260-03 POTTING OF HONEYCOMB SANDWICH PANELS PPS 25.30 BONDING USING DHMS A6.09 EPOXY ADHESIVE Page 447 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PPS PPS PPS PPS PPS PPS PPS 30.01 31.02 31.05 32.01 32.02 34.08 37.03 HEAT TREATMENT OF ALUMINUM ALLOYS CLEANING PROCESSES OF ALUMINUM SURFACE TREATMENTS OF CORROSION RESISTANT STEELS CROMATE CONVERSION COATING MANUAL APPLICATION OF CHEMICAL CONVERSION COATINGS EPOXY PRIME FUSION WELDING OF ALUMINUM AND ALUMINUM ALLOYS - LEARJET INC., 0000600246 8405 LEMMON AVE. DALLAS, TX US, 75209-2645 TEL: 469 791 4000 FAX: 469 791 4062 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to : Limitation: FAA Repair Center Certificate number L5VR603Y Limitation: European Aviation Safety Agency Certificate # EASA.145.5311 LEARJET INC., 0000600249 BRADLEY INTL. AIRPORT, 85-173 WINDSOR LOCKS, CT US, 06096 TEL: 860 627 9491 FAX: 860 292 7254 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Limitation to : Limitation: FAA Repair Station Certificate # SH5R197N Limitation: European Aviation Safety Agency EASA.145.4275 Limitation: Bermuda Department of Civil Aviation AMO # DBA/AMO/123 LEARJET INC., 0000103283 1255 E. AERO PARK BLVD., BLDG. S TUCSON, AZ US, 85756-9279 TEL: 520 746 5100 FAX: 520 746 5505 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval KW3R646L & EASA dual approval EASA.145.4626. LEARJET INC. DBA BOMBARDIER, 0000117886 ONE LEARJET WAY, BLDG. 7 WICHITA, KS US, 67209-2924 TEL: 316 946 7606 FAX: 316 946 2225 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval LK2R981K & EASA dual approval EASA.145.4624. Limitation: Limitation: Classification #A# Sub Contractor for: Limitation: Manufacturing of the Wire Kit / Harness per applicable Bombardier Limitation: Engineering Drawings and Specifications Page 448 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval LEDFORD GAGE LAB., 0000100842 227 INDUSTRIAL DR. MULVANE, KS US, 67110-9226 TEL: 316 777 9300 FAX: 316 777 2220 Class: A SUBCONTRACTORS G INDIRECT PRODUCT LEDTRONICS INC., 0000103674 23105 KASHIWA CT. TORRANCE, CA US, 90505-4026 TEL: 800 579 4875 FAX: 310 534 1424 Class: C MANUFACTURER LEE AEROSPACE, 0000101529 9323 E. 34TH ST. N. WICHITA, KS US, 67226-2621 TEL: 316 636 9200 FAX: 316 636 9256 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS LEE AEROSPACE PRODUCTS INC., 0000107146 90 W. EASY ST. #5 SIMI VALLEY, CA US, 93065-6206 TEL: 805-527-1811 FAX: 805-527-5641 Class: C MANUFACTURER LEE AIR CO. INC., 0000107147 7545 WHEATLAND AVE. SUN VALLEY, CA US, 91352-5196 TEL: 818-767-0777-510 FAX: 818 767 3714 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval BJ4R078M & EASA dual approval EASA.145.5153. LEE AIR INC., 0000101182 4603 SENECA ST. S. WICHITA, KS US, 67217-4524 TEL: 316 524 4622 FAX: 316 524 9109 Class: B EQUIPMENT SUPPLIERS LEE PRODUCTS ENGINEERING SERVICES,, 2946 S. HYDRAULIC ST. Specification Controlled: BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT 0000101064 Specification Controlled: LES 1034 SOLDERING PROCESS Class: A SUBCONTRACTORS Page 449 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval WICHITA, KS US, 67216 TEL: 316 524 4466 FAX: 316 524 4455 D DISTRIBUTOR LEE PRODUCTS LTD., 0000110019 3 HIGH ST., CHALFONT ST-PETER GERRARDS CROSS, BU GB, SL9 9QE TEL: 01753 886664 FAX: 01753 859588 Class: D DISTRIBUTOR LEE SPRING, 0000133513 1235 NORTH HOBSON STREET GILBERT, AZ US, 85233 TEL: 1 888 777 4647 FAX: 888 426 6655 Class: C MANUFACTURER LEE SPRING, 0000101134 140 58TH ST. BROOKLYN, NY US, 11220-2521 TEL: 888-777-4647 FAX: 888-426-6655 Class: C MANUFACTURER LEE SPRING CO. INC., 0000110569 245 LAKE AVE. BRISTOL, CT US, 06010 TEL: 999 999 9999 FAX: 888 888 8888 Class: C MANUFACTURER LEE SPRING LTD., 0000106352 LATIMER ROAD WOKINGHAM, BK GB, RG41 2WA TEL: 118 978 1800 FAX: 118 977 4832 Class: D DISTRIBUTOR LEE VALLEY TOOLS LTD., 0000106415 1090 MORRISON DR. OTTAWA, ON CA, K2H 1C2 TEL: 800 267 8767 FAX: 800 668 1807 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods LEEDS BRONZE ENGINEERING LIMITED, 0000131605 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to ''Springs & other related products'' only Class: Page 450 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 14 Westland Square, Dewsbury Road Leeds, YW GB, LS11 5UB TEL: 0113 2718711 FAX: 514-855-5001 D DISTRIBUTOR LEESTA INDUSTRIE LTEE., 0000107782 6 PLATEAU POINTE-CLAIRE, QC CA, H9R 5W2 TEL: 514 694 3930-224 FAX: 514 694 3935 Class: A SUBCONTRACTORS LEGO CENTRE DE FINITION INC., 0000107149 6880 COUTURE BLVD. MONTREAL, QC CA, H1P 2W6 TEL: 514 323 4131 FAX: 514 323 9093 Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 160-06 PHOSPHATE TREATMENT BAPS 160-09 CHROMIUM PLATING OF STEELS HEAT TREATED TO LESS THAN 220,000 PSI AND COPPER ALLOYS BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-28 CHROMIUM PLATING OF STEELS HEAT TREATED TO ABOVE 220 KSI BAPS 160-32 SULFURIC ACID ANODIZING BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 180-001 ALKALINE CLEANING Page 451 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY MPS 160-08 CADMIUM PLATING OF CARBON AND LOW ALLOY STEELS BELOW 220,000PSI, COPPER ALLOYS AND CRES STEELS MPS 160-27 CADMIUM PLATING OF CARBON AND LOW ALLOY HEAT TREATED TO 220-240 KSI AND ABOVE PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.05 ETCH INSPECTION OF LOW ALLOY STEELS PPS 33.01 CADMIUM PLATING (E1) PPS 33.03 ELECTRO DEPOSITED NICKEL PPS 33.04 HARD CHROMIUM PLATE Specification Controlled with Limitations: BAPS 168-15 STRESS RELIEF OF METALS Limitation: LIMITED TO CARBON & LOW ALLOY STEEL PARTS HEAT TREATED TO LESS THAN 260 Limitation: KSI, COPPER ALLOYS, TITANIUM ALLOYS, CARBURIZED STEEL & NITRIDED STEEL. PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS Limitation: limited to embrittlement and stress relief only and the temperature must be under 700 Limitation: degree Fahrenheit and furnace #1, 2,3 PPS 30.06 PRECIPITATION HARDENABLE (PH) STAINLESS STEEL Limitation: limited to embrittlement and stress relief only and the temperature must be under 700 Limitation: degree Fahrenheit furnance # 1, 2, 3 PPS 30.08 STEEL HEAT TREATMENT - MARTENSITIC STAINLESS STEEL Limitation: limited to embrittlement and stress relief only and the temperature must be under 700 Limitation: degree Fahrenheit for furnace # 1, 2, 3 LEKTRO-TECH, 0000119319 2300 S. DOCK ST., UNIT B, SUITE 102 PALMETTO, FL US, 34221-8890 TEL: 813 831 4006 FAX: 813 831 1238 Class: C MANUFACTURER LEMO SA, Class: 0000110854 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: p/n: N383-9052 Sealant ( 12-350, Super COR-B ) Page 452 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval CHEMIN DES CHAMP COURBES 28 ECUBLENS, ZH CH, 1024 TEL: 4121 695 1685 FAX: 4121 695 1602 C MANUFACTURER LEMO USA INC., 0000107949 635 PARK CT. ROHNERT PARK, CA US, 94928-7940 TEL: 707-578-8811 FAX: 707 578 0869 Class: C MANUFACTURER LEONARD'S METAL INC., 0000107152 2629 ESTHNER CT. WICHITA, KS US, 67213-1849 TEL: 316 945 9555 FAX: 316 944 4145 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS LEONARD'S METAL INC., 0000109716 3030 HWY. 94 N. ST-CHARLES, MO US, 63301-0244 TEL: 636 916 2115 FAX: 636 949 1512 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-15 STRESS RELIEF OF METALS PPS 01.02 FORMING ALUMINUM ALLOYS PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS Specification Controlled with Limitations: BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: Limited to parts from 0.032 to 0.163inch. with the exception of rivets and forging LEONARD'S METAL INC., 0000101595 3600 MUELLER ROAD ST-CHARLES, MO US, 63301-8004 TEL: 636-949-1508 FAX: 314-568-0259 Class: A SUBCONTRACTORS Specification Controlled: PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING LES ADHESIFS ADHPRO INC., 0000108407 1650 INDUSTRIEL MAGOG, QC CA, J1X 4V9 TEL: 819 847 2269 FAX: 877 245 2053 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Page 453 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval LES CABLAGES INFORMATIQUES, 0000110555 2800 JOSEPH A. BOMBARDIER LAVAL, QC CA, H7P 6E2 TEL: 514 695 1300 FAX: 514 695 7745 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods LES INDUSTRIES ECHELLEX, 0000101965 7920 BOUL. LAURIER BUREAU 102 TERREBONNE, QC CA, J7M 1W3 TEL: 450 478 2491 FAX: 450 478 6598 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods LES JOINTS ETANCHES R.B. INC., 0000107333 8585 HENRI-BOURASSA O. ST-LAURENT, QC CA, H4S 1P7 TEL: 514-334-2220 FAX: 514 333 8329 Class: A SUBCONTRACTORS D DISTRIBUTOR LES METAUX SPECIALISES SAMUEL, 0000107974 21525 CLARK-GRAHAM BAIE D'URFE, QC CA, H9X 3T5 TEL: 514 457 3399 FAX: 514 457 9393 Class: D DISTRIBUTOR LES OUTILLEURS ARPEX INC., Class: 0000121103 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limation to class A for the following part no ( cut to size only) Limitation: BAS63038140-6 Limitation: BAS63038140-7 Limitation: BAS63038140-14 Limitation: BAS67039051-4 Limitation: BAS67039051-9 Limitation: BAS67039051-10 Limitation: BAS67039051-26 Limitation: BAS67039051-29 Limitation: BAS67039051-30 Limitation: BAS67039051-31 Limitation: BAS67039052-4 Limitation: BAS67039052-26 Limitation: BAS67039052-30 Limitation: BAS67039052-31 Limitation: Specification Controlled: Page 454 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 565 DES ECOLES DRUMMONDVILLE, QC CA, J2B 1J6 TEL: 819 474 5585 FAX: 819 474 5544 A SUBCONTRACTORS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS LES PLASTIQUES LAIRD, 0000107141 9220 BOULEVARD DES SCIENCES ANJOU, QC CA, H1J 3A9 TEL: 514 354 0707-228 FAX: 514 354 5504 Class: D DISTRIBUTOR LES PRODUITS CHIMIQUES AMPLEX, 0000107154 600 DELMAR POINTE-CLAIRE, QC CA, H9R 4A8 TEL: 514 630 3309-233 FAX: 514 630 5951 Class: D DISTRIBUTOR LES VENTES NAGAM SALES INC., 0000128923 937 REVERCHON ST-LAURENT, QC CA, H4T 4L2 TEL: 514 331 6191 FAX: 514 331 3533 Class: H COMMERCIAL OFF THE SHELF LESJOFORS SPRINGS AMERICA, INC., 0000111126 982 GRIFFIN POND ROAD CLARKS SUMMIT, PA US, 18411-9214 TEL: 570 585 7548 FAX: 570 585 7540 Class: C MANUFACTURER LEVITON MFG. CO. INC., 0000103104 745 JEFFERSON BLVD. WARWICK, RI US, 02886-2223 TEL: 800 437 7307 FAX: 800 832 9538 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods LFC INDUSTRIES INC., 0000103478 1221 CORPORATE DR. W. ARLINGTON, TX US, 76006-6103 TEL: 817 640 1322 FAX: 817 652 1566 Class: C MANUFACTURER Page 455 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address LHM TECHNOLOGIES INC., 0000107157 446 ROWNTREE DAIRY ROAD WOODBRIDGE, ON CA, L4L 8H2 TEL: 905 856 2466-216 FAX: 905 856 2474 Classification Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: limited to preparation of electrical bonding only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: limited to manual installation only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: limited to type 2 only LIBELLULE IMAGES INC., 0000119029 765 NOBEL, SUITE 105-106 ST-JEROME, QC CA, J7Z 7A3 TEL: 450 432 6342 FAX: 450 432 0093 Class: A SUBCONTRACTORS LIEBHERR AEROSPACE, 0000133395 1465 WOODLAND DR. SALINE, MI US, 48176-1627 TEL: 734 429 7225 FAX: 734 429 5357 Class: E MAINTENANCE ORGANIZATION LIEBHERR-AEROSPACE CANADA, 0000102959 4250 AUTOROUTE CHOMEDEY (13) LAVAL, QC CA, H7R 6E9 TEL: 450-963-7174-125 FAX: 450 963 6828 Class: D DISTRIBUTOR LIEBHERR-AEROSPACE LINDENBERG GMBH, 0000106446 PFANDERSTRASSE 50-52 LINDENBERG, 09 DE, 88161 TEL: 83 81 46 4255 FAX: 83 81 46 4540 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: EASA approval DE.145.0034 & FAA Repair Station dual approval LA7Y195J. Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: DISTRIBUTOR FOR REPAIR OF LIEBHERR PRODUCTS Page 456 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval LIEBHERR-AEROSPACE TOULOUSE SAS, 0000109128 408 AVE. DES ETATS-UNIS TOULOUSE, 31 FR, 31016 TEL: 33 567 732 309 FAX: 33 561 352 982 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: EASA approval FR.145.071 & FAA Repair Station dual approval B8EY828J. LIFEPORT INC., 0000106038 1610 HERITAGE ST. WOODLAND, WA US, 98674-9581 TEL: 360 225 1212 FAX: 360 225 1214 Class: B EQUIPMENT SUPPLIERS LIGHTNING DIVERSION SYSTEMS, 0000102070 16572 BURKE LANE HUNTINGTON BEACH, CA US, 92647-4538 TEL: 714 841 1080 FAX: 714 841 5095 Class: C MANUFACTURER LIGHTNING PROTECTION CORPORATION, 0000134576 5750 THORNWOOD DR. GOLETA, CA US, 93117 TEL: 805 967 4577 FAX: 805 967 4320 Class: B EQUIPMENT SUPPLIERS LIKRO PRECISION LTD., 0000107160 3150 PEPPER MILL CT. MISSISSAUGA, ON CA, L5L 4X4 TEL: 905-828-9191 FAX: 905-828-4840 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: PPS 21.20 MIXING AND HANDLING TWO PART SEALANTS Specification Controlled with Limitations: PPS 21.21 GENERAL SEALING PRACTICES Limitation: Wet Installation of Fasteners only. LILLY-RAM CHEMICAL COMPANY, 0000132529 1740 E. MONTICELLO CT. ONTARIO, CA US, 91761-9699 TEL: 909 223 9699 FAX: 909 223 9699 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Garalease 915 and MR 225 87-X26 Page 457 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval LIMCO AIREPAIR INC., 0000110948 5304 S. LAWTON AVE. TULSA, OK US, 74107-9428 TEL: 918 445 4300 FAX: 918 445 2210 Class: B EQUIPMENT SUPPLIERS LIMPET PRINTED TAPES LIMITED, 0000131857 BOND HOUSE, HARDWICKE ROAD GREAT GRANSDEN, SANDY, BU GB, SG19 3BJ TEL: 44 0 1767676130 FAX: 44 0 176767613 Class: C MANUFACTURER LINATEX RUBBER PRODUCTS, 0000134612 6 1/2 MILE JALAN IPOH BATU CAVE, SEL MY, 68100 TEL: 603 6255 2172 FAX: 603 6250 7621 Class: C MANUFACTURER LINDE CANADA LIMITED, 0000134739 5555, BOUL. DES GRANDES-PRAIRIES MONTREAL, QC CA, H1R 1B4 TEL: 514 323 6410 FAX: 514 323 4629 Class: C MANUFACTURER LINDE NORTH AMERICA, INC., 0000108396 10097 201 ST. LANGLEY, BC CA, V1M 3G4 TEL: 604 882 7642 FAX: 604 882 7645 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Class: C MANUFACTURER Specification Controlled with Limitations: PSPEC 618 ARAMID FABRIC/EPOXY COMPONENTS (121C) AUTOCLAVE CURE PSPEC 626 DECORATIVE FINISHED GLASS PHENOLIC & THERMOPLASTIC COMPONENTS A/C INTERIOR Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Lineage Alloys powder LA3386 added to EMCM-001 for BAMS 561-001 Type 2. LINDEN BECKETT HOLDINGS T/A AVIATIO, LASHAM AIRFIELD, LASHAM NR ALTON, HA GB, GU34 5SR TEL: 01256 381359 FAX: 01256 381359 LINEAGE ALLOYS, INC., 0000121758 1901 ELLIS SCHOOL ROAD BAYTOWN, TX US, 77521 0000117734 Page 458 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 281 426 5535 FAX: 281 426 7484 LINEAR TECHNOLOGY CORP., 0000103488 1630 MCCARTHY BLVD. MILPITAS, CA US, 95035-7417 TEL: 408 432 1900 FAX: 408 434 0507 Class: C MANUFACTURER LION SHIPPING SUPPLIES LTD., 0000110576 442 RUE AIME-VINCENT VAUDREUIL-DORION, QC CA, J7V 5V5 TEL: 450 455 6168 FAX: 450 455 6607 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods LISI AEROSPACE - BLANC AERO INDUSTR, 0000122340 14-20 RUE SAINT HILAIRE ZI VERT GALANT SAINT OUEN L'AUMONE, 95 FR, 95310 TEL: 134 48 33 87 FAX: 134 48 33 88 Class: C MANUFACTURER LISI AEROSPACE CANADA CORP., 0000119216 2000 PLACE TRANSCANADIENNE DORVAL, QC CA, H9P 2X5 TEL: 514-421-4567 FAX: 514-421-4566 Class: C MANUFACTURER LISI AEROSPACE FASTENER TECHNOLOGY, EGE SERBEST BOLGESI AYFER SOK NO 21 GAZIEMIR-IZMIR, 35 TR, 35410 TEL: 902324770400 FAX: 514 875 8967 Class: C MANUFACTURER 0000134319 LISI AEROSPACE NORTH AMERICA INC., 0000128188 2602 SKYPARK DRIVE TORRANCE, CA US, 90509 TEL: 626-322-3220 FAX: 999-999-9999 Class: D DISTRIBUTOR LISI AEROSPACE, THE MONADNOCK CO., 16728 E. GALE AVENUE CITY OF INDUSTRY, CA Class: C MANUFACTURER 0000103462 Page 459 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 91745 TEL: 626 322 3220 FAX: 626 964 1355 LISI AEROSPACE-CREUZET MAROC, 0000124425 AEROPORT MOHAMED V CASABLANCA, MA MA, 20240 TEL: 5 22 53 60 90 FAX: 5 22 53 92 85 Class: A SUBCONTRACTORS LITTELFUSE INC., 0000103562 8755 W.HIGGINS ROAD SUITE 500 CHICAGO, IL US, 60631 TEL: 773-628-0684 FAX: 800 522 7697 Class: C MANUFACTURER LKD AEROSPACE INC., 0000118547 8020 BRACKEN PLACE S.E. SNOQUALMIE, WA US, 98065-9257 TEL: 425 396 0829-224 FAX: 425 396 1129 Class: D DISTRIBUTOR LMI AEROSPACE - HILLSIDE, 2853 SO. HILLSIDE WICHITA, KS Class: A SUBCONTRACTORS 0000130912 Specification Controlled: BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY PSPEC 401 HEAT TREATMENT OF ALUMINIUM AND ALUMINIUM ALLOYS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 460 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval US, 67216 TEL: 316 682 4551 FAX: 316 682 4551 LMI AEROSPACE AUBURN, 0000107153 101 WESTERN ST. AUBURN, WA US, 98001-4209 TEL: 253-939-9553- FAX: 253-833-2779 Class: A SUBCONTRACTORS LMI FINISHING INC., 0000107164 2104 N. 170TH E. AVE. TULSA, OK US, 74116-4919 TEL: 918 438 2122 FAX: 918 438 3003 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: LIMITED FOR MANUAL RIVETING ONLY Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY LES 1004 PENETRANT INSPECTION LES 1045 ANODIZING, CHROMIC ACID LES 1047 CHEMICAL FILM TREATMENT, APPLICATION OF - ALUMINUM ALLOYS LES 1136 CHEM MILL PPS 32.01 CROMATE CONVERSION COATING PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PPS 42.01 CHEMICAL MILLING OF ALUMINUM AND ALUMINUM ALLOYS Specification Controlled with Limitations: BAERD-GEN-018-5E EVALUATION OF PAINTS Limitation: Limited to montly process control test ( not approved for paint acceptance tests) Page 461 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 186 CHEMICAL MILLING OF ALUMINUM Limitation: CHEMICAL MILLING OF ALUMINIUM LOCKWOOD INDUSTRIES, INC. D.B.A. FR, 28525 W. INDUSTRY DR. VALENCIA, CA US, 91355 TEL: 661 367 9135 FAX: 661 702 9769 0000132281 Class: C MANUFACTURER LOCTITE CORP., 0000108334 1 DEXTER DR. SEABROOK, NH US, 03874 TEL: 603 474 5541 FAX: 603 474 5545 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM LONE STAR AVIATION INC., 0000102236 604 WISTERIA ST. S. MANSFIELD, TX US, 76063-2423 TEL: 682-518-8882 FAX: 682-518-8831 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to Filter no . 122253-10A LONE STAR X-RAY SHIELDING, 0000116375 24982 FM 2090 SPLENDORA, TX US, 77372-3717 TEL: 281 399 4564 FAX: 281 689 7237 Class: C MANUFACTURER LONG & MARSHALL LTD, 0000133619 UNIT 1, HAYWARD BUISNESS CENTRE, NEW LAN HAVANT, HA GB, P09 2NL TEL: 02392 228031 FAX: 514 855 5000 Class: A SUBCONTRACTORS LONG LOK FASTENERS CORP., 0000102741 20501 S. BELSHAW AVE. CARSON, CA US, 90746 TEL: 424 213 4570 FAX: 424 213 4584 Class: C MANUFACTURER LONSEAL INC., 0000109056 928 E. 238TH ST. Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 462 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification CARSON, CA US, 90745-6208 TEL: 310 830 7111-17 FAX: 310 952 7651 D DISTRIBUTOR LOOS & CO. CABLEWARE TECHNOLOGY, 0000104510 901 INDUSTRIAL BLVD. NAPLES, FL US, 34104-3715 TEL: 941 643 5667 FAX: 941 643 4558 Class: C MANUFACTURER LOOS & CO. INC., 0000106546 ROUTE 101 POMFRET, CT US, 06258 TEL: 860-630-4243 FAX: 860 928 0880 Class: A SUBCONTRACTORS C MANUFACTURER Scope of Approval Limitation: CUT TO SIZE FLOOR MATS - 601R405121 & 601R40511 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Specification Controlled: BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAPS 164-03 SWAGING OF CABLE ASSEMBLIES CAPTIVE LABORATORY LES 1018 SWAGING AND TESTING OF CABLE ASSEMBLIES PPS 03.02 SWAGING STRAIGHT SHANK TERMINALS PPS 03.04 SWAGING OF BALL TERMINALS PPS 03.05 PROOF LOADING CABLE AND CHAIN ASSEMBLIES Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Electro-Chemical Etching of stainless steel 300 Cres series only LOPRESTI AVIATION, 0000136151 210 AIRPORT DR. E. SEBASTIAN, FL US, 32958 TEL: 772 228 9745 FAX: 772 228 9750 Class: B EQUIPMENT SUPPLIERS LORD CORP., 0000100216 2455 ROBINSON ROAD ERIE, PA Class: B EQUIPMENT SUPPLIERS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 463 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 16509 TEL: 877-275-5673-... FAX: 814-860-3635 E MAINTENANCE ORGANIZATION Limitation: SEE EMCM Limitation: FAA Repair Station approval GV1R180K & EASA dual approval EASA 145.4643. Limitation: Limitation: Egypt Approval CAI/LORD/AS/2003 Limitation: China Approval F00100148 LORD CORP., 0000136362 2800 PIONNEER DRIVE BOWLING GREEN, KY US, 42101 TEL: 270 781 5440 FAX: 514 855 5000 Class: C MANUFACTURER LORD CORPORATION, 0000130657 601 S. ST. SAEGERTOWN, PA US, 16433 TEL: 814 763 2345 FAX: 814 763 4318 Class: C MANUFACTURER LORD MECHANICAL PRODUCTS DIV., 0000108251 4644 WADSWORTH ROAD DAYTON, OH US, 45414-4220 TEL: 814 868 3180 FAX: 937 278 6286 Class: C MANUFACTURER LOURDES INDUSTRIES INC., 0000102718 65 HOFFMAN AVE. HAUPPAUGE, NY US, 11788-4716 TEL: 631 234 6600 FAX: 631 234 7595 Class: C MANUFACTURER LOXEAL ENGINEERING ADHESIVES, 0000110961 VIA MARCONATO 2 CESANO MADERNO, MI IT, 20031 TEL: 39 0362 551701 FAX: 39 0362 524225 Class: C MANUFACTURER LPA CHANNEL ELECTRIC, BATH ROAD THATCHAM, BK Class: D DISTRIBUTOR 0000107995 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM # 1066 Page 464 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval GB, RG18 3ST TEL: 1635 864 866 FAX: 1635 869 178 LUBRICATION ENGINEERS INC., 0000108839 1919 TULSA E. WICHITA, KS US, 67216-2438 TEL: 316-529-6814 FAX: 316-529-4654 Class: A SUBCONTRACTORS C MANUFACTURER LUBRICATION EQUIPMENT, 0000101977 3526 E. BROADWAY ROAD PHOENIX, AZ US, 85040-2834 TEL: 602 437 1245 FAX: 602 437 8862 Class: H COMMERCIAL OFF THE SHELF LUBRICATION TECHNOLOGY INC., 0000118968 7595 GALLIA PIKE FRANKLIN FURNACE, OH US, 45629-8988 TEL: 740 574 5150 FAX: 740 574 4740 Class: C MANUFACTURER LUFTHANSA TECHNIK AERO ALZEY GMBH, RUDOLF-DIESEL-STRASSE 10 ALZEY, 07 DE, 55232 TEL: 6731 497 0 FAX: 6731 497 197 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: EASA approval DE.145.0015 & FAA Repair Station dual approval L7AY586J. Limitation: Limitation: Kenya Approval No. K/AI/1/89 Limitation: China Approval No. F04900333 Limitation: Saudi Arabia Approval No. AMO-227F Limitation: Philippine Approval No. 285-F Limitation: Bangladesh Approval No.CAA/5534/48/AELD Limitation: Egypt ApprovalNo.AI/LUFT.AEROS/AS/1/2003 Limitation: Canada Acceptance No. TCCA 897-26 Limitation: Thailand Approval No. 100/2534 LUFTHANSA TECHNIK AG, 0000125152 WEG BEIM JAGER 193, BAHNHOF 28 HAMBURG, 02 DE, 22335 0000118543 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION Page 465 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 49 405 070 5077 FAX: 40 5070 65456 LUFTHANSA TECHNIK AG, 0000109107 WEG BEIM JAGER 193, BAHNHOF WG HAMBURG, 02 DE, 22335 TEL: 40 5070 65058 FAX: 40 50 70 65456 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: EASA approval DE.145.0001 & FAA Repair Station dual approval DLAY225D. LUFTHANSA TECHNIK C.S., 0000129991 7424 E. 30TH ST. N. TULSA, OK US, 74115 TEL: 918 831 7760 FAX: 918 831 7744 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station Approval # 15LR725Y Limitation: EASA Dual Approval # 145.6088 LUMINATOR HOLDING LP., 0000100900 900 KLEIN ROAD PLANO, TX US, 75074-3712 TEL: 972 881 8951 FAX: 972 881 8900 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS D DISTRIBUTOR E MAINTENANCE ORGANIZATION LUMINESCENT SYSTEMS INC., 0000101024 130 COMMERCE WAY EAST AURORA, NY US, 14052-2164 TEL: 716 655 0800-146 FAX: 716 655 4216 Class: B EQUIPMENT SUPPLIERS LUMINESCENT SYSTEMS INC., 0000104844 4 LUCENT DR. LEBANON, NH US, 03766-1439 TEL: 603 643 7766-... FAX: 603 643 5947 Class: C MANUFACTURER LUMINESCENT SYSTEMS INC., 0000106204 55 LINDSAY DORVAL, QC CA, H9P 2S6 TEL: 514 636 9921 FAX: 514 636 0476 Class: C MANUFACTURER E MAINTENANCE ORGANIZATION LUSTERCRAFT PLASTICS INC., 1818 S. MERIDIAN AVE. WICHITA, KS Class: C MANUFACTURER 0000101006 Page 466 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 67213-1924 TEL: 316 942 8451 FAX: 316 942 3577 LUXAIR S.A., 0000120852 AEROPORT DE LUXEMBOURG LUXEMBOURG, LU LU, 2987 TEL: 24 56 49 51 FAX: 24 56 49 79 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS LUXIA INNOVATION LTD., 0000106104 624 Deslauries, Saint-Laurent Montreal, QC CA, H4N 1W5 TEL: 514 337 7386 FAX: 514 337 6762 Class: A SUBCONTRACTORS LYDALL THERMAL ACOUSTICAL GROUP, 0000107929 1241 BUCK SHOALS ROAD HAMPTONVILLE, NC US, 27020 TEL: 336-468-8522 FAX: 336-468-8555 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS LYONS MANUFACTURING CO., INC., 0000100844 711 MAIN E. LYONS, KS US, 67554-2111 TEL: 6202572331 FAX: 620 257 2334 Class: A SUBCONTRACTORS Specification Controlled with Limitations: LES 1046 MAGNESIUM PRETREATMENT Limitation: Limitation to "Manual application (Touch-up)" M E P LTD., 0000129700 ST-MICHAEL'S CLOSE AYLESFORD, KE GB, ME20 7BU TEL: 01622 718642 FAX: 999 999 9999 Class: A SUBCONTRACTORS M&I MATERIALS LIMITED, 0000130669 HIBERNIA WAY MANCHESTER, LA GB, M32 0ZD TEL: 1618645457 FAX: 1618645444 Class: A SUBCONTRACTORS C MANUFACTURER M. M. NEWMAN CORP., 24 TIOGA WAY Class: C MANUFACTURER 0000108791 Page 467 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval MARBLEHEAD, MA US, 01945-1575 TEL: 781 631 7100 FAX: 781 631 8887 M.C. GILL CORP., 0000100960 4056 EASY ST. EL MONTE, CA US, 91731-1054 TEL: 626-443-4022 FAX: 626 350 5880 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER MAC FASTENERS INC., 0000107171 1110 ENTERPRISE E. OTTAWA, KS US, 66067-4138 TEL: 785 242 8812 FAX: 785-242-4616 Class: C MANUFACTURER MACDERMID INC., 0000108449 245 FREIGHT ST. WATERBURY, CT US, 06702-1818 TEL: 203 575 5700 FAX: 999 999 9999 Class: C MANUFACTURER MACH SRL, 0000107957 VIA CANCELLIERA 27/D CECCHINA(ROMA), RM IT, 00041 TEL: 06 934 96252 FAX: 06 934 3964 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: P/N 215-87502-24; 215-87502-10; 215-85002-6 MACLEAN - FOGG CO. DEL, 0000108173 611 COUNTRY CLUB ROAD POCAHONTAS, AR US, 72455-8803 TEL: 870 892 5201 FAX: 870 892 8938 Class: C MANUFACTURER MACLEAN SKY, 0000104838 5989 RICKENBACKER ROAD COMMERCE, CA US, 90040 TEL: 323 869 0150-201 FAX: 323 869 0155 Class: C MANUFACTURER MAD SHEEP PROMOTIONALS, Class: 0000128297 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 468 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 434 CARDIFF WAY PORT MOODY, BC CA, V3H 3T1 TEL: 604-818-6985 FAX: 604 684 8089 H COMMERCIAL OFF THE SHELF MADELEC AERO, 0000108241 1 RUE SAINT EXUPERY GAZERAN, 78 FR, 78125 TEL: 1345 71530 FAX: 1348 55953 Class: D DISTRIBUTOR MAG AEROSPACE INDUSTRIES INC., 0000100950 1500 GLENN CURTISS ST. CARSON, CA US, 90746-4012 TEL: 310 884 7250 FAX: 310 884 7550 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION MAGCHEM INC., 0000109072 1271 AMPERE, SUITE 101 BOUCHERVILLE, QC CA, J4B 5Z5 TEL: 450-641-8500-244 FAX: 450 655 1717 Class: C MANUFACTURER D DISTRIBUTOR MAGEE PLASTICS CO., 0000117030 303 BRUSH CREEK ROAD WARRENDALE, PA US, 15086-7529 TEL: 724-776-2220 FAX: 724-776-9696 Class: C MANUFACTURER MAGELLAN AEROSPACE, 0000106811 660 BERRY ST. WINNIPEG, MB CA, R3C 2S4 TEL: 204 775 8331-... FAX: 204 775 74941 Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Specification Controlled: CAPTIVE LABORATORY PPS 01.02 FORMING ALUMINUM ALLOYS PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS PPS 34.08 EPOXY PRIME Specification Controlled with Limitations: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION Page 469 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Limitation: CAPTIVE LAB ONLY MAGELLAN AEROSPACE (BLACKPOOL) LIMI, AMY JOHNSON WAY BLACKPOOL BUSINESS BLACKPOOL, LA GB, FY4 2RP TEL: 1253 345466 FAX: 1253 340690 0000108066 Class: A SUBCONTRACTORS Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 185-01 BARREL AND VIBRATORY FINISHING Specification Controlled with Limitations: BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Limitation: Limited to Swaging of Bearings BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limited for the Installation of Bushes using Liquid Nitrogen MAGELLAN AEROSPACE (GREYABBEY) LIMI, 0000110006 11 TULLYKEVIN ROAD GREYABBEY NEWTOWARDS, AT GB, BT22 2QE TEL: 44 (0) 2842 7... FAX: 44 2 28 4275 Class: A SUBCONTRACTORS MAGELLAN AEROSPACE MIDDLETOWN INC, 0000133618 2320 WEDEKIND DR. MIDDLETOWN, OH US, 45042-2390 TEL: 513 422 2751 FAX: 514 855 5000 Class: B EQUIPMENT SUPPLIERS MAGELLAN AEROSPACE U.K. LTD., 0000107476 DAVY WAY LLAY INDUSTRIAL ESTATE WREXHAM, CL GB, LL12 0PB TEL: 1978 85 80 44 FAX: 1978 856 769 Class: A SUBCONTRACTORS Specification Controlled: BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS PSPEC 905 INSTALLATION & SEALING OF INTERFERENCE FIT BUSHES Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 168-15 STRESS RELIEF OF METALS PPS 01.36 FORMING OF TITANIUM AND TITANIUM ALLOYS PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS PPS 31.09 CLEANING OF TITANIUM PPS 37.03 FUSION WELDING OF ALUMINUM AND ALUMINUM ALLOYS PPS 37.04 FUSION WELDING OF FERROUS AND NICKEL ALLOYS PPS 37.05 FUSION WELDING OF TITANIUM PPS 37.06 TESTING AND APPROVAL OF AIRCRAFT WELDERS PPS 37.10 REQUIREMENTS FOR FUSION WELDS PSPEC 213 FORMING OF ALUMINUM ALLOYS Page 470 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PSPEC 231 FABRICATION OF TITANIUM AND TITANIUM ALLOYS PSPEC 401 HEAT TREATMENT OF ALUMINIUM AND ALUMINIUM ALLOYS Specification Controlled with Limitations: PSPEC 420 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS Limitation: STRESS RELIEVE ONLY MAGELLAN AIRCRAFT SERVICES LLLP., 0000125653 2345 TOWNSHIP ROAD CHARLOTTE, NC US, 28273-0119 TEL: 704 504 9204 FAX: 704 504 9205 Class: D DISTRIBUTOR MAGELLAN WREXHAM, 0000107475 MINERS ROAD, LLAY INDUSTRIAL ESTATE WREXHAM, CL GB, LL12 0PJ TEL: 1978 852101 FAX: 1978 856769 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 161-007 APPLICATION OF MIL-L-46010 SOLID FILM LUBRICANT BAPS 161-008 APPLICATION OF MIL-81329 SOLID FILM LUBRICANT BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 185-02 SHOT PEENING OF METAL PARTS PPS 17.03 SHOT PEENING PPS 20.03 PENETRANT FLAW DETECTION PPS 20.07 CONDUCTIVITY TESTING Page 471 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PPS 20.08 PPS 31.02 PPS 31.05 PPS 32.01 PPS 32.03 PPS 33.01 PPS 34.03 PPS 34.08 PSPEC 300 PSPEC 410 PSPEC 419 ALUMINIUM PSPEC 910 MAGNADYNE CORP., 0000120573 1111 W. VICTORIA ST. COMPTON, CA US, 90220-5812 TEL: 310 735 2073 FAX: 310 735 2044 Class: H COMMERCIAL OFF THE SHELF MAGNAGHI AERONAUTICA SPA, 0000129009 VIA GALEILEO FERRARIS 76 NAPOLI, NA IT, 80142 TEL: 0815977111 FAX: 0817340648 Class: A SUBCONTRACTORS MAGNETIC SHIELD CORP., 0000108199 740 THOMAS DR. BENSENVILLE, IL US, 60106-1625 TEL: 630 766 7800 FAX: 630 766 2813 Class: C MANUFACTURER MAGNETIC SHIELD CORPORATION, 0000107281 740 N. THOMAS DR. BENSENVILLE, IL US, 60106-1625 TEL: 630 766 7800 FAX: 630 766 2813 Class: C MANUFACTURER MAGNETIKA INC., Class: 0000107260 Learjet Approved Suppliers HARDNESS TESTING CLEANING PROCESSES OF ALUMINUM SURFACE TREATMENTS OF CORROSION RESISTANT STEELS CROMATE CONVERSION COATING CHROMIC ACID ANODIZING (A1) CADMIUM PLATING (E1) APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) EPOXY PRIME PENETRANT FLAW DETECTION CHROMIC ACID ANODISING CHEMICAL CONVERSION COATING OF ALUMINIUM AND ALLOYS ETCH AND EPOXY PRIMING Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Page 472 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 300 RED SCHOOL LANE PHILLIPSBURG, NJ US, 08865-2233 TEL: 908 454 2600 FAX: 908 454 3742 C MANUFACTURER MAGNOLIA ADVANCED MATERIALS, INC, 0000100909 4360 NORTHEAST EXPRESSWAY ATLANTA, GA US, 30340 TEL: 800 831 8031 FAX: 770 451 2777 Class: C MANUFACTURER MAHR FEDERAL INC., 0000107594 1144 EDDY ST. PROVIDENCE, RI US, 02905-4511 TEL: 401 784 3375 FAX: 401 784 3417 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods MAISON LIPARI, 0000110578 6390 JEAN TALON E. ST-LEONARD, QC CA, H1S 1M8 TEL: 514 253 1515 FAX: 514 253 9566 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods MAJILITE CORP., 0000106458 1530 BROADWAY ROAD DRACUT, MA US, 01826-2830 TEL: 978 441 6800 FAX: 978 441 0826 Class: H COMMERCIAL OFF THE SHELF MALLORY SONALERT PRODUCTS INC., 0000111096 4411 S. HIGH SCHOOL ROAD INDIANAPOLIS, IN US, 46241-6404 TEL: 317 612 1000 FAX: 317 612 1010 Class: C MANUFACTURER MANKIEWICZ COATINGS LLC., 0000123167 415 JESSEN LANE CHARLESTON, SC US, 29492 TEL: 843 654 7755 FAX: 843 654 7759 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 490 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to CRJ1000 Test Aircraft ONLY for: Limitation: Alexit H/S MC-202 (base of basecoat) Limitation: Alexit H/S MC-212 (hardener for basecoat) Limitation: Alexit H/S MC-222 (thinner for basecoat) Page 473 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Limitation: Alexit H/S MC-100-0000 (base of clear coat) Limitation: Alexit H/S MC-110 (hardener for clear coat) Limitation: Alexit H/S MC-120C (thinner for clear coat) Limitation: Alexit 404-74-XXXX-1 (Suede coating) where XXXX is the color number. MANKIEWICZ GEBR & CO, 0000125381 GEORG-WIHELM-STRABE 189 HAMBURG, 02 DE, 21107 TEL: 40 75103 510 FAX: 40 75103 355 Class: C MANUFACTURER MANKIEWICZ UK LLP, 0000133795 UNIT 26 ASHVILLE WAY, WHETSTONE LEICESTER, LE GB, LE8 6NU TEL: (0)116 847780 FAX: 116 2867259 Class: D DISTRIBUTOR MANUFACTURER SUPPLY CO. INC., 0000100848 1704 W. DOUGLAS WICHITA, KS US, 67203-5814 TEL: 316 265 3164 FAX: 316 265 6873 Class: C MANUFACTURER MANUFACTURING INTERCO - PLANT 1003, 500 COTE-VERTU O. DORVAL, QC CA, H4S 1Y9 TEL: 514 855 5001 FAX: 514 855 7401 Class: A SUBCONTRACTORS 0000600561 MANX ENGINEER LTD., 0000110028 GLADSTONE PARK RAMSEY, IM IM, IM8 2LA TEL: 01624 817600 FAX: 01624 817999 Class: A SUBCONTRACTORS MANX MFG. LTEE., 1070 LEVIS LACHENAIE, QC Class: C MANUFACTURER 0000107958 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Supplier per the Transport Canada Civil Aviation Manufacturer approval 12-58 and the Limitation: applicable Quality Management System Page 474 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval CA, J6W 4L1 TEL: 450 492 1566 FAX: 450 492 7578 MAP, 0000108088 PLACE D'OSSAU SERRES-CASTET, 64 FR, 64121 TEL: 0033 5 5933 1688 FAX: 0033 5 5933 9 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Touch-up only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Touch-up only BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Preparation only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual installation only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Prep-pen only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Prep-pen only MAPAERO S.A., 0000110373 10 AVE. DE LA RIJOLE PAMIERS, 09 FR, 09100 TEL: 011 33 534 01... FAX: 011 33 561 60 Class: C MANUFACTURER MARANA AEROSPACE SOLUTIONS,INC., 0000107591 PINAL AIR PARK MARANA, AZ US, 85653 TEL: 520 682 4181 FAX: 520 616 5065 Class: A SUBCONTRACTORS E MAINTENANCE ORGANIZATION MARATHON POWER TECHNOLOGIES CO., 8301 IMPERIAL DR. WACO, TX US, 76712-6524 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval M5PR650J & EASA dual approval EASA.145.4653. 0000100021 Page 475 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 254-741-5430 FAX: 254 776 6558 MARATHONNORCO INC., 0000102830 8301 IMPERIAL DR. WACO, TX US, 76712-6524 TEL: 254 741 5401 FAX: 254 776 6558 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER MARBO ITALIA SPA, 0000133371 VIA TORQUATO TASSO 25/27 POGLIANO MILANESE, MI IT, 20010 TEL: 39 02 93961 204 FAX: 39 02 93550048 Class: C MANUFACTURER MARKEM-IMAJE, 0000129171 9 GASPARD-MONGE BOURG LES VALENCE, 26 FR, 26501 TEL: 475 755 700 FAX: 475 828 910 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Product in EMCM-001 for supplier#1057 MARKEM-IMAJE INC., 0000108470 5448 TIMBERLEA BLVD. MISSISSAUGA, ON CA, L4W 2T7 TEL: 800 267 5108 FAX: 866 921 9732 Class: D DISTRIBUTOR Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Distributor of Markem-Imaje inks manufactured at the Bourg Les Valences, FR and listed in Limitation: EMCM-001 MARKETING MASTERS INC., 0000128323 1871 N.W. GILMAN BLVD. ISSAQUAH, WA US, 98027 TEL: 425 454 5610 FAX: 425 454 2932 Class: C MANUFACTURER MARL INTERNATIONAL LTD., 0000108927 MARL BUSINESS PARK ULVERSTON, CU GB, LA12 9BN TEL: 1229 582430 FAX: 1229 585155 Class: C MANUFACTURER MARLBOROUGH ENGINEERING LTD., 67 SYDENHAM ROAD Class: A SUBCONTRACTORS 0000110029 Specification Controlled: BAPS 188-08 MACHINING OF COMPOSITES Page 476 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BELFAST, BL GB, BT3 9DJ TEL: 02890 732181 FAX: 02890 732798 G INDIRECT PRODUCT MAROTTA SCIENTIFIC CONTROLS INC., 0000107181 78 BOONTON AVE. P.O BOX 427 MONTVILLE, NJ US, 07045-0427 TEL: 973 334 7800 FAX: 973 334 1219 Class: B EQUIPMENT SUPPLIERS MARPLES GEARS INC., 0000101290 808 W. SANTA ANITA ST. SAN GABRIEL, CA US, 91776 TEL: 626 570 1744 FAX: 626 570 9286 Class: B EQUIPMENT SUPPLIERS MARS METAL CO., 0000123975 4140 MORRIS DR. BURLINGTON, ON CA, L7L 5L6 TEL: 800-381-5335 FAX: 905-637-8841 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to nylon bag per BA drawing KGC998-0061-3 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION G INDIRECT PRODUCT Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limited to experimental work only. BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to experimental work only. BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Limited to experimental work only. BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Limitation: Limited to experimental work only. BAPS 176-04 MAGNETIC PARTICLE INSPECTION Limitation: Limited to experimental work. BAPS 176-17 RADIOGRAPHIC INSPECTION Limitation: Limited to experimental work only. BAPS 188-02 COLD WORKING OF HOLES Limitation: Limited to experimental work only. MARSHALL OF CAMBRIDGE AEROSPACE LTD, THE AIRPORT CAMBRIDGE, CA GB, CB5 8RX TEL: 01223 373737 FAX: 12223 321032 MARTIN AEROSPACE LTD., 0000120884 CALDWELLSIDE INDUSTRIAL ESTATE 0000102690 Class: A SUBCONTRACTORS Page 477 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval LANARK, LA GB, ML11 7SR TEL: 01555 664751 FAX: 01555 665860 MASCO SERVICE CORP., 0000104683 850 S. DOOLEY ST. GRAPEVINE, TX US, 76051 TEL: 817 481 8205 FAX: 817 488 8918 Class: Systems with Limitations: D DISTRIBUTOR 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval UX2R230L & EASA dual approval EASA.145.4656. MASON ELECTRIC CO., 0000100922 13955 BALBOA BLVD. SYLMAR, CA US, 91342-1084 TEL: 818-675-9181 FAX: 818 365 6809 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Class E ( In-Service ) limited to FAA Repair Station to Limited Accessories per Certificate Limitation: Number I39R153Y MASTER CHEMICAL CORP., 0000108451 501 W. BOUNDARY ST. PERRYSBURG, OH US, 43551-6029 TEL: 419-874-7902 FAX: 419-874-0684 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM #694 MATERION BRUSH INC., 0000128169 7375 INDUSTRIAL PKWY. LORAIN, OH US, 44053 TEL: 440 960 5660 FAX: 440 960 5668 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM code 861 MATERION BRUSH INC., 0000108513 14710 W. PORTAGE RIVER S. ROAD ELMORE, OH US, 43416-9500 TEL: 419 862 4432 FAX: 419 862 4000 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM code 821 MATERION BRUSH PERFOMRANCE ALLOYS, 0000108323 27555 COLLEGE PARK DR. WARREN, MI US, 48088-4875 TEL: 810 772 2700 FAX: 810 772 2472 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 478 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification MATRIX AVIATION INC., 0000107632 1701 S. HOOVER ROAD WICHITA, KS US, 67209-2894 TEL: 316 942 0844 FAX: 316 942 0891 Class: D DISTRIBUTOR MATRIX TECHNOLOGY LTD., 0000107182 280 HILLMOUNT ROAD, UNIT #6 MARKHAM, ON CA, L6C 3A1 TEL: 905-477-4442-245 FAX: 905 477 3606 Class: D DISTRIBUTOR MATSUBARA MFG. CO. LTD., 0000108140 3-63 URASATO MIDORI-KU PLANT 3 NAGOYA, 23 JP, 4580847 TEL: 5289 12860 FAX: 5289 11719 Class: A SUBCONTRACTORS Scope of Approval Specification Controlled: BAPS 172-34 FUSION WELDING PPS 37.03 FUSION WELDING OF ALUMINUM AND ALUMINUM ALLOYS PPS 37.04 FUSION WELDING OF FERROUS AND NICKEL ALLOYS PPS 37.06 TESTING AND APPROVAL OF AIRCRAFT WELDERS PPS 37.10 REQUIREMENTS FOR FUSION WELDS Specification Controlled with Limitations: BAPS 174-02 FABRICATION OF PLUMBING LINES Limitation: Limitation to pressure tests only BAPS 174-08 ASSEMBLY AND INSTALLATION OF FLARELESS FITTINGS ON PLUMBING LINES Limitation: Limitation to pressure tests only BAPS 174-09 INSTALLATION OF WIGGINS TYPE COUPLINGS ON RIGID PLUMBING LINES Limitation: Limitation to pressure tests only BAPS 174-18 INSTALLATION OF DEUTSCHLITE DPL SERIES FITTINGS Limitation: Limitation to pressure tests only MATTCO FORGE INC., 0000119607 16443 MINNESOTA AVE. PARAMOUNT, CA US, 90723 TEL: 562 634 8635 FAX: 562 531 3776 Class: C MANUFACTURER MATTHEWS INTERNATIONAL CORP., 101 FAIRVIEW AVE. PITTSBURGH, PA Class: C MANUFACTURER 0000108442 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 479 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval US, 15238-1943 TEL: 412 665 2500 FAX: 412 828 4545 MAY TECHNOLOGY & MFG. INC., 0000101746 2922 WHEELING KANSAS CITY, MO US, 64129-1100 TEL: 816 923 6262 FAX: 816 923 6277 Class: A SUBCONTRACTORS MCAULEY ENGINEERING, 0000133876 21 BALLYMENA ROAD BALLYMONEY, AT GB, BT53 7EX TEL: 44 (0) 28 276... FAX: 44 (0) 28 276 Class: A SUBCONTRACTORS MCFADDEN'S, 0000110581 10208 LOUIS-H. LAFONTAINE MONTREAL, QC CA, H1J 2T3 TEL: 514 343 5414 FAX: 514 343 5308 Class: H COMMERCIAL OFF THE SHELF MCGILL MFG. CO. INC., 0000101441 2300 EAST EVANS AVENUE VALPARAISO, IN US, 46383-4299 TEL: 219 465 2200 FAX: 219 465 2401 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER MCGINTY MACHINE CO. INC., 0000101512 222 N. HYDRAULIC ST. WICHITA, KS US, 67214-4218 TEL: 316 269 3344 FAX: 316 269 2244 Class: A SUBCONTRACTORS Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to surface preparation of parts only. BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to manual riveting only. BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: Conductivity Approved and Harness Testing Limited to Rockwell Testing Only. BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Limitation: Limited to Roller Swaging Only. Page 480 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: No Heating Processes Allowed. MCMASTER-CARR SUPPLY CO., 0000103335 600 COUNTY LINE ROAD ELMHURST, IL US, 60126-2034 TEL: 630 834 9600 FAX: 630 834 9427 Class: H COMMERCIAL OFF THE SHELF MCMASTER-CARR SUPPLY CO., 0000105634 1901 RIVERSIDE PKWY DOUGLAS, GA US, 30135-3150 TEL: 404 346 7000 FAX: 404 349 9091 Class: H COMMERCIAL OFF THE SHELF MCMASTER-CARR SUPPLY CO., 0000109293 200 AURORA INDUSTRIAL PKWY. AURORA, OH US, 44202-8087 TEL: 330 995 5500 FAX: 330 995 9600 Class: H COMMERCIAL OFF THE SHELF MECACHROME CANADA (2009) INC., 0000121714 11100 JULIEN-AUDETTE MIRABEL, QC CA, J7N 3L3 TEL: 450-595-5049 FAX: 450 595 5065 Class: A SUBCONTRACTORS Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Touch up only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Touch up only BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to preparation only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual installation only BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Limited to wet and fillet seal for bushing and bearing installation only. BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM Page 481 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval ALLOYS Limitation: Type II with prep-pen only BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to touch-up only BAPS 175-006 INSTALLATION OF BUSHING USING FORCEMATE COLD EXPANSION PROCESS Limitation: Class 2 Process MECAERO FAIRCHILD, 0000107189 BLVD. DU GRAND CASTAING ROQUES-SUR-GARONNE, 31 FR, 31128 TEL: 5615 18230 FAX: 5615 16078 Class: C MANUFACTURER MECAHERS GROUP, 0000130873 2 RUE SAINT EXUPERY LAUNAGUET, 66 FR, 31140 TEL: 330 562 798787 FAX: 330 562 798787 Class: A SUBCONTRACTORS MECALIM, Class: 0000119123 Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Limitation to touch-up only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Limitation to touch-up only BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual riveting only BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Bearing and bushing installation, wet installation of fasteners and faying surface for installation of nutplates only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation to touch-up with prep-pen (Type II) BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type II with prep-pen only BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limitation to installation with nitrogen only Systems with Limitations: Page 482 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Z. I. DE BEAUREGARD BRIVE, 19 FR, 19100 TEL: 555 860992 FAX: 555 869542 B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS Limitation: Mecalim is approved as; Class B Equipment supplier for S215-001-03 / -04 components, Limitation: Class C Manufacturer supplier for 215MR components. MECANIZACIONES AERONAUTICAS S.A., 0000136607 CRTA. DE LOGRONO ALESON, 26 ES, 26315 TEL: 34 94 143 7011 FAX: 34 94 143 7191 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 138-49 APPLICATION OF BAMS 565-013 HEAT RESISTANT COATING MECANIZACIONES AERONAUTICOS S.A., 0000108770 POLIGONO INDUSTRIAL EL SEQUERO AVE. AGONCILLO, 26 ES, 26509 TEL: 41 437 011 FAX: 41 437 191 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 138-49 APPLICATION OF BAMS 565-013 HEAT RESISTANT COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS Page 483 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 185-02 SHOT PEENING OF METAL PARTS BAPS 185-03 PEEN FORMING OF METAL PARTS CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type II with prep-pen only MECAPROTEC INDUSTRIES, 0000133714 24 RUE JEAN-FRANCOIS ROMIEU MURET, 31 FR, 31600 TEL: +33(0)561518200 FAX: +33(0)56151820 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 138-49 APPLICATION OF BAMS 565-013 HEAT RESISTANT COATING BAPS 160-45 CHROME FREE ACID ANODIZING OF ALUMINUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS MECAPROTEC INDUSTRIES, 0000107191 34 DE JOFFRERY MURET, 31 FR, 31607 TEL: 5615 18200 FAX: 5615 18201 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Limitation: NOT AUTHORIZED TO PURCHASE RAW MATERIAL Specification Controlled: BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Page 484 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-34 ZINC-NICKEL ALLOY PLATING BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS CAPTIVE LABORATORY MPS 250-023 PAINTING DETAIL PARTS AEROSPATIALE A330/A340 MPS 250-024 CHROMIC ACID ANODIZING AEROSPATIALE A330/A340 MPS 250-027 CHROMATE CONVERSION COATING ON ALUMINIUM AEROSPATIALE A330/A340 MPS 250-028 CADMIUM PLATING MPS 250-301 PENETRANT INSPECTION MPS 250-302 MAGNETIC PARTICLE INSPECTION MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 PPS 20.03 PENETRANT FLAW DETECTION PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 34.08 EPOXY PRIME PSPEC 300 PENETRANT FLAW DETECTION PSPEC 410 CHROMIC ACID ANODISING PSPEC 910 ETCH AND EPOXY PRIMING Specification Controlled with Limitations: MPS 250-201 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES AEROSPATIALE A330/A340 PROGRAM Limitation: NOT AUTHORIZED FOR VIBROETCHING MECHANICAL RUBBER PRODUCTS CO., 0000107788 77 FORESTER AVE. SUITE 1 WARWICK, NY US, 10990-1128 TEL: 845-986-2271 FAX: 845-986-0399 Class: C MANUFACTURER Page 485 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval MEDAIRE INC., 0000106154 23610 N. 20TH DR., SUITE 10 PHOENIX, AZ US, 85085 TEL: 480-333-3754 FAX: 480 333 3592 Class: H COMMERCIAL OFF THE SHELF MEDAIRE INC., 0000102222 1250 WEST WASHINGTON ST, SUITE 442 TEMPE, AZ US, 85281 TEL: 480 333 3754 FAX: 480 333 3592 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods MEGA INDUSTRIES, 0000103387 28 SANFORD DR. GORHAM, ME US, 04038-2646 TEL: 207 854 1700 FAX: 207 854 2287 Class: B EQUIPMENT SUPPLIERS MEGA-LAB MFG. CO. LTD., 0000108236 361 CONNIE CRES., UNIT B CONCORD, ON CA, L4K 5R2 TEL: 905 532 9000 FAX: 905 532 9003 Class: H COMMERCIAL OFF THE SHELF MEGGITT (NORTH HOLLYWOOD) INC., 0000100931 12838 SATICOY ST. N. HOLLYWOOD, CA US, 91605-3505 TEL: 818-765-8160 FAX: 818 759 2149 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Approved for maintenance activities for Learjet programs per FAA certificate QG3R788L and Limitation: EASA.145.5015 certificate. MEGGITT (ORANGE COUNTY) INC., 0000101500 14600 MYFORD ROAD IRVINE, CA US, 92606 TEL: 949-276-0248 FAX: 949 221 7504 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval E3DR893J & EASA dual approval EASA.145.4423. MEGGITT (ROCKMART) INC., 669 GOODYEAR ST. ROCKMART, GA Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS 0000101511 Page 486 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 30153-2554 TEL: 770 684 7855-... FAX: 770 684 7438 C MANUFACTURER MEGGITT (TROY) INC., 0000110188 3 INDUSTRIAL DR. TROY, IN US, 47588 TEL: 812 547-7071-... FAX: 812-547-3987 Class: C MANUFACTURER MEGGITT AEROSPACE LTD., 0000106951 HOLBROOK LANE COVENTRY, WM GB, CV6 4AA TEL: 2476 682000 FAX: 2476 668712 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: In accordance with TCCA certificate no 897.40 EASA 145.00693 and FAA D98Y398N MEGGITT AIRCRAFT BRAKING SYSTEM, 0000101416 1204 MASSILLON ROAD AKRON, OH US, 44306-4188 TEL: 330-796-4072 FAX: 330 796 9791 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval EASA.145.4095 & EASA dual approval A32R709J. MEGGITT AIRCRAFT BRAKING SYSTEM, 0000137269 120 CORPORATE DRIVE DANVILLE, KY US, 40422 TEL: 859 936 3746 FAX: 859 236 2067 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval # 8DRR699C & EASA dual approval EASA.145.6685 MEGGITT AIRCRAFT BRAKING SYSTEMS, 0000130472 190 CORPORATE DR. DANVILLE, KY US, 40422 TEL: 330 796 7229 FAX: 330 796 9791 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER MEGGITT AIRDYNAMICS INC., 0000107081 2616 RESEARCH DR. CORONA, CA US, 92882-6978 TEL: 909 734 0070 FAX: 909 734 2594 Class: B EQUIPMENT SUPPLIERS MEGGITT AVIONICS, 0000110397 TITCHFIELD PARK BARNES WALLIS ROAD Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 487 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval SEGENSWORTH E. FAREHAM, HA GB, PO15 5TT TEL: 1489 483308 FAX: 1489 483210 MEGGITT CONTROL SYSTEMS, 0000104066 19 EYNCOOURT ROAD DUNSTABLE, BE GB, LU5 4TS TEL: 1582 473645 FAX: 1582 473693 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER MEGGITT POLYMER SOLUTIONS, 0000109138 ASHBY ROAD SHEPSHED LOUGHBOROUGH, LE GB, LE12 9EQ TEL: 1 509 500042 FAX: 1 509 500150 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER MEGGITT S.A., 0000101533 ROUTE DE MONCOR 4 FRIBOURG, FR CH, 1701 TEL: 26 407 11 11 FAX: 2813616113 Class: B EQUIPMENT SUPPLIERS MEGGITT SAFETY SYSTEMS INC., 0000101611 1915 VOYAGER AVE. SIMI VALLEY, CA US, 93063-3375 TEL: 805 584 4100-... FAX: 805-584-9157 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER E MAINTENANCE ORGANIZATION MEGGITT SILICONE PRODUCTS, 0000101452 2010 LAFAYETTE AVE. MCMINNVILLE, OR US, 97128-9333 TEL: 503-472-0045 FAX: 503-434-6454 Class: C MANUFACTURER MEIRA CORP., 0000118523 81-1 SHINHAZAMA SEKI CITY, 21 JP, 5013923 TEL: 575 24 6661 FAX: 575 24 6541 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval WL3R949L & EASA dual approval EASA.145.5016. Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS Page 488 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT BAPS 168-14 HEAT TREATMENT OF STEELS BAPS 168-15 STRESS RELIEF OF METALS BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS BAPS 176-14 NITAL ETCH INSPECTION OF STEEL PARTS BAPS 180-001 ALKALINE CLEANING CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limited to vibro-engraving identification BAPS 185-000 GRINDING OF STEEL PARTS Limitation: Limited to external grinding at Meira site. MEIRA CORPORATION SEKI PLANT 3, 0000132915 6-1 NOZOMIGAOKA SEKI-CITY, 21 JP, 5013219 TEL: 575 21 5860 FAX: 81 575 29 7118 Class: B EQUIPMENT SUPPLIERS MEL AVAITION LTD., 0000110033 4 BYFORD ROAD CHILTON IND. ESTATE SUDBURY, SK GB, CO10 6YG TEL: 01787 737282 FAX: 01787 310812 Class: E MAINTENANCE ORGANIZATION MELVIN ENTERPRISE (DBA BRY MELVIN), 14950 WEST HARDSCRABBLE ROAD ARIVACA, AZ US, 85601 TEL: 520 398 3220 FAX: 520 398 3220 MERC AEROSPACE, 0000131410 LOWER CLOUGH MILL, PENDLE ST. BARROWFORD, LA 0000130693 Class: H COMMERCIAL OFF THE SHELF Class: A SUBCONTRACTORS Specification Controlled: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Page 489 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification GB, BB9 8PH TEL: 01282 694290 FAX: 01282 613390 Learjet Approved Suppliers Scope of Approval BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS MERCO INDUSTRIES LTD., 0000107789 75 CASTER AVE. WOODBRIDGE, ON CA, L4L 5Z2 TEL: 905 851 1110 FAX: 905 851 4844 Class: A SUBCONTRACTORS MERRIMAC INDUSTRIES INC., 0000107195 41 FAIRFIELD PLACE CALDWELL, NJ US, 07006-6206 TEL: 973 575-1300 FAX: 973 575 0531 Class: C MANUFACTURER MESOTEC INC., 0000107196 3575 INDUSTRIEL BLVD SHERBROOKE, QC CA, J1L 1X7 TEL: 819 822 2777 FAX: 819 822 4117 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING Specification Controlled: BAPS 150-003 INSTALLATION BAPS 168-013 HARDNESS AND METALS BAPS 175-004 RETENTION OF BAPS 175-005 INSTALLATION OF SAFETYING DEVICES ELECTRICAL CONDUCTIVITY TESTING OF BEARING BY PRESS SWAGING OF INTERFERENCE FIT BUSHINGS Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: For touch up only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: for touch up only BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: limited to non intrusive method only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: LIMITED TO MANUAL ONLY BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: LIMITED TO THE SEALING OF HELICOILS, BUSHINGS, BEARINGS AND WET INSTALLATION OF FASTENERS BAPS 188-02 COLD WORKING OF HOLES Limitation: Limitation to type 1 only Page 490 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval MESSIER-BUGATTI DOWTY, 0000122233 ZONE AERONAUTIQUE LOUIS-BREGUET VELIZY, 78 FR, 78140 TEL: 146 29 81 00 FAX: 146 29 87 00 Class: B EQUIPMENT SUPPLIERS MESSIER-BUGATTI-TRACER LLC., 0000121187 2040 W. CORNELL ST. MILWAUKEE, WI US, 53209-6316 TEL: (414)395-8339 FAX: 414 875 7296 Class: E MAINTENANCE ORGANIZATION MESSIER-DOWTY INC., 0000100677 574 MONARCH AVE. AJAX, ON CA, L1S 2G8 TEL: 404 305 2626 FAX: 905 683 6946 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Canadian AMO approval 41-89 & EASA dual approval EASA.145.7045. METAL FINISHING CO. (CHIHUAHUA), 0000132559 AV. NICOLAS GOGOL #11332 COMPLEJO CHIHUAHUA, CHI MX, 31136 TEL: 614 483 1324 FAX: N/A Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Limited to closed paint booth #4 BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Limited to closed paint booth #4 BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Surface preparation and conductive conversion coating per BAPS 160- 040 Type II Alodine 1132 Touch and Prep Pen, (finish code: A047 as per BAERD GEN-004 BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING Limitation: Limited to closed paint booth #4 BAPS 160-10 CHROMIC ACID ANODIZING Page 491 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: - Immersion Process – Type 1 Limitation: - Manual Application Type 2 – Alodine 1132 Touch and Prep Pen BAPS 168-13 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: Limited to testing for Aluminum parts. BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Limitation: Limited to : Limitation: Type 1, Method A, Sensibility level 3, Form A BAPS 180-01 ALKALINE CLEANING Limitation: Limited to: Type 1 Immersion (soak) cleaning PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS Limitation: Limited to: Primer application, polyurethane high solids, finish code F21 Type I, Grade B to DHMS C4.06 PPS 31.02 CLEANING PROCESSES OF ALUMINUM Limitation: Excluding: Manual Alkaline Cleaning for In Situ Fluorescent Penetrant Inspection PPS 31.07 CLEANING AND STRIPPING OF PAINTED SURFACES Limitation: Limited to: Manual Stripping Painted Metal Surfaces PPS 34.08 EPOXY PRIME Limitation: Limited to closed paint booth #4 PSPEC 923 APPLICATION OF EPOXY FINISH COAT TO A/C INTERNAL SURFACES APPLICATION OF EPOXY FINISH COAT TO A/C INTERNAL SURFACES Limitation: Limited to Paint Booth # 4 Only. METAL FINISHING CO. INC., 0000104692 1423 S. MCLEAN BLVD. WICHITA, KS US, 67213-4302 TEL: 316 267 7289 FAX: 316 267 5127 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-09 CHROMIUM PLATING OF STEELS HEAT TREATED TO LESS THAN 220,000 PSI AND COPPER ALLOYS BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-23 HARD ANODIZING OF ALUMINUM ALLOYS BAPS 160-32 SULFURIC ACID ANODIZING Page 492 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 161-007 APPLICATION OF MIL-L-46010 SOLID FILM LUBRICANT BAPS 168-15 STRESS RELIEF OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 176-17 RADIOGRAPHIC INSPECTION BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 185-02 SHOT PEENING OF METAL PARTS CAPTIVE LABORATORY LES 1004 PENETRANT INSPECTION LES 1006 INSPECTION, MAGNETIC PARTICLE LES 1009 INSPECTION, RADIOGRAPHIC LES 1045 ANODIZING, CHROMIC ACID LES 1046 MAGNESIUM PRETREATMENT LES 1047 CHEMICAL FILM TREATMENT, APPLICATION OF - ALUMINUM ALLOYS LES 1048 PLATING CADMIUM-STEEL & COPPER LES 1049 PLATING, CHROMIUM LES 1114 MANGANESE PHOSPHATE COATING, APPLICATION OF LES 1198 QUALIFICATION OF AIRCRAFT CASTINGS LES 1210 SONIC, INSPECTION LES 1323 PASSIVATION OF CORROSION RESISTANT STEEL LES 1365 SHOT PEENING MPS 160-08 CADMIUM PLATING OF CARBON AND LOW ALLOY STEELS BELOW 220,000PSI, COPPER ALLOYS AND CRES STEELS MPS 176-07 ULTRASONIC INSPECTION OF WROUGHT METALS PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS PPS 33.01 CADMIUM PLATING (E1) PPS 33.03 ELECTRO DEPOSITED NICKEL Page 493 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval Specification Controlled with Limitations: BAERD-GEN-018-3E WELDING EVALUATION Limitation: RESTRICTED TO WELDING EVALUATION TESTING FOR THE PURPOSE OF CERTIFYING WELDERS TO BAERD-GEN-10 BAPS 168-13 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS Limitation: Limited to embrittlement and stress relief only PPS 30.06 PRECIPITATION HARDENABLE (PH) STAINLESS STEEL Limitation: Limited to embrittlement and stress relief only PPS 30.08 STEEL HEAT TREATMENT - MARTENSITIC STAINLESS STEEL Limitation: Limited to embrittlement and stress relief only METAL IMPROVEMENT CO. LLC, 0000135371 98 FILLEY STREET BLOOMFIELD, CT US, 06002 TEL: 860-243-2220 FAX: 860-242-7292 Class: C MANUFACTURER METAL IMPROVEMENT CO. LLC., 0000107200 3239 46TH ST. E. VERNON, CA US, 90058-2407 TEL: 323 585 2168 FAX: 323 585 0157 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Part process prior to Dec 31-2013 is acceptable for depletion of stock only Specification Controlled: PPS 17.03 SHOT PEENING PPS 17.04 SHOT PEEN FORMING Specification Controlled BAPS 185-02 SHOT PEENING Limitation: APPROVED FOR BAPS 185-03 PEEN FORMING METAL IMPROVEMENT CO. LLC., 0000107199 RUE DE CAZENAVE ZONE INDUSTRIEL STE BAYONNE, 64 FR, 64100 TEL: 559 55 42 52 FAX: 559 55 65 67 Class: A SUBCONTRACTORS with Limitations: OF METAL PARTS GANTRY MACHINE #72 & #73. OF METAL PARTS Specification Controlled: BAPS 185-02 SHOT PEENING OF METAL PARTS BAPS 185-03 PEEN FORMING OF METAL PARTS MPS 250-071 SHOT PEENING OF METAL PARTSAEROSPATIALE A330/A340 PROGRAM Page 494 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval METAL IMPROVEMENT CO. LLC., 0000125262 C/ING. RAFAEL RUBIO 6 RINCONADA, 41 ES, 41309 TEL: 954 11 50 87 FAX: 954 11 50 88 Class: A SUBCONTRACTORS Specification Controlled: BAPS 185-02 SHOT PEENING OF METAL PARTS BAPS 185-03 PEEN FORMING OF METAL PARTS METAL IMPROVEMENT CO. LLC., 0000107202 105 ALFRED KUEHNE BLVD. BRAMPTON, ON CA, L6T 4K3 TEL: 905 791 8002 FAX: 905 791 4490 Class: A SUBCONTRACTORS Specification Controlled: BAPS 185-02 SHOT PEENING OF METAL PARTS BAPS 185-03 PEEN FORMING OF METAL PARTS PPS 17.03 SHOT PEENING PPS 17.04 SHOT PEEN FORMING - METAL IMPROVEMENT CO. LLC., 0000107895 2588-A INDUSTRY WAY LYNWOOD, CA US, 90262-4015 TEL: 213 563 1527 FAX: 999 999 9999 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Approved for Grantry Machine #1300 & #1400 & # 2300 Specification Controlled: BAPS 185-02 SHOT PEENING OF METAL PARTS BAPS 185-03 PEEN FORMING OF METAL PARTS PPS 17.03 SHOT PEENING PPS 17.04 SHOT PEEN FORMING - METAL IMPROVEMENT CO. LLC., 0000100026 440 N. WEST ROAD WELLINGTON, KS US, 67152-8047 TEL: 620 326 5509 FAX: 620 326 6043 Class: A SUBCONTRACTORS Specification Controlled: BAPS 185-02 SHOT PEENING OF METAL PARTS BAPS 185-03 PEEN FORMING OF METAL PARTS LES 1271 FORMING OF ALUMINUM ALLOYS BY SHOT PEENING LES 1365 SHOT PEENING PPS 17.03 SHOT PEENING PPS 17.04 SHOT PEEN FORMING - METAL IMPROVEMENT CO. LLC., 0000107201 2151 HATHAWAY S. SANTA ANA, CA US, 92705-5247 TEL: 714 546 4160 FAX: 714 546 8643 Class: A SUBCONTRACTORS Specification Controlled: LES 1365 SHOT PEENING PPS 17.03 SHOT PEENING PSPEC 703 PEENING OF METALLIC COMPONENTS Specification Controlled with Limitations: Page 495 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 185-02 SHOT PEENING OF METAL PARTS Limitation: LIMITED TO GANTRY MACHINE #9 & #12. METAL IMPROVEMENT CO. LLC., 0000110035 HAWARDEN AIRPORT CHESTER ROAD BROUGHTON DEESIDE, CL GB, CH4 0BZ TEL: 01244 534999 FAX: 01244 539666 Class: A SUBCONTRACTORS Specification Controlled: BAPS 185-02 SHOT PEENING OF METAL PARTS PSPEC 703 PEENING OF METALLIC COMPONENTS METAL IMPROVEMENT CO. LLC., 0000110036 HAMBRIDGE LANE-NAVIGATION HOUSE NEWBURY, AT GB, RG14 5TU TEL: 44 1635 279600 FAX: 44 1635 279601 Class: A SUBCONTRACTORS Specification Controlled: BAPS 185-02 SHOT PEENING OF METAL PARTS PPS 17.03 SHOT PEENING PSPEC 703 PEENING OF METALLIC COMPONENTS METAL SPRAY CONCEPTS LLC, 0000132700 109 MILLAND AVENUE CUBA, MO US, 65453 TEL: 5738853881 FAX: 5738853883 Class: A SUBCONTRACTORS METAL SUD S.R.L., 0000128816 STRADE STATALE APPIA NC, LOC. CRISCI ARIENZO, CE IT, 81021 TEL: 0823 805397 FAX: 0823 805089 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-23 HARD ANODIZING OF ALUMINUM ALLOYS BAPS 160-36 ELECTROLYTIC POLISHING BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 176-14 NITAL ETCH INSPECTION OF STEEL PARTS BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL Page 496 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 160-36 ELECTROLYTIC POLISHING Limitation: Limitation: Limited to when parts are EDMed per BAPs 188-001 BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: Hardness testing only METAL TEST, 0000108731 1205 5TH AVE. S. SEATTLE, WA US, 98032 TEL: 253 813 5970 FAX: 253 813 5971 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION INDEPENDANT LABORATORY METALCRAFT TECHNOLOGIES INC., 0000101637 526 N. AVIATION WAY CEDAR CITY, UT US, 84721-8601 TEL: 435 867-6822 FAX: 435 586 0289 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 180-001 ALKALINE CLEANING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS LES 1004 PENETRANT INSPECTION LES 1047 CHEMICAL FILM TREATMENT, APPLICATION OF - ALUMINUM Page 497 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval ALLOYS LES 1051 HEAT TREAT OF ALUMINUM ALLOYS LES 1079 EPOXY FINISH, FUEL RESISTANT, APPLICATION OF LES 1323 PASSIVATION OF CORROSION RESISTANT STEEL Specification Controlled with Limitations: BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: LIMITED TO SHEET/PLATE, BAR & EXTRUSION, NOT H/T TO OVERAGED COND (T7XXXX) METALMART INTL. INC., 0000127762 400 RIVERWALK PKWY., SUITE 500 TONAWANDA, NY US, 14150 TEL: 877 664 6399 FAX: 716 982 0223 Class: D DISTRIBUTOR METALMART INTL. INC., 0000121982 5828 SMITHWAY ST. COMMERCE, CA US, 90040-1606 TEL: 562 692 6868-244 FAX: 562 699 6868 Class: D DISTRIBUTOR METALS UK LTD., 0000119089 WALKER PARK INDUSTRIAL ESTATE GUIDE, BB GB, BB1 5UD TEL: 1254 586700 FAX: 1254 692063 Class: D DISTRIBUTOR METCOR INC., 0000107423 560 ARTHUR- SAUVE ST-EUSTACHE, QC CA, J7R 5A8 TEL: 450 473 1884-223 FAX: 450 491 6454 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 168-14 HEAT TREATMENT OF STEELS BAPS 168-15 STRESS RELIEF OF METALS Page 498 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 168-19 CARBURIZING OF STEEL BAPS 180-001 ALKALINE CLEANING CAPTIVE LABORATORY PPS 30.02 SUB-ZERO TREATMENT OF STEEL PARTS PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS PPS 30.06 PRECIPITATION HARDENABLE (PH) STAINLESS STEEL PPS 30.11 STEEL CASE HARDENING (CARBURIZING) PPS 30.12 STEEL HEAT TREATMENT - GENERAL PPS 30.13 HEAT TREATMENT OF NICKEL AND NICKEL ALLOYS Specification Controlled with Limitations: BAPS 168-20 HEAT TREATMENT OF COPPER AND COPPER ALLOYS Limitation: Limitation to Furnace # 701 for Annealing between 900F and 1050F . BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS Limitation: LIMITED TO THE HEAT TREATMENT OF PH STEELS ONLY PPS 20.08 HARDNESS TESTING Limitation: FROM METCOR ANJOU PPS 30.16 STEEL CASE HARDENING (LIQUID NITRIDING) Limitation: FROM METCOR ANJOU METCUT RESEARCH INC., 0000107206 3980 ROSSLYN DR. CINCINNATI, OH US, 45209-1110 TEL: 513 271 5100-363 FAX: 513 271 9511 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2E MECHANICAL TESTING: PLASTICS, RUBBERS STATIC AND ELASTIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS INDEPENDANT LABORATORY Page 499 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address METRALTEC S.L., 0000109017 C/EIBAR 13 POLIGONO DE BETONO VITORIA, 01 ES, 01013 TEL: 9452 77788 FAX: 9452 64666 Classification Class: A SUBCONTRACTORS Scope of Approval Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: limited to the 125 – 160°F range of the specification for the application of BAMS 565-001 Limitation: primers & BAMS 565-002 topcoats BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limitation to preparation only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limitation to manual riveting only BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: LIMITED TO FAY SURFACE SEALING AND WET INSTALLATION OF FASTENERS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limitation to nitrogen cooling only METTEX ELECTRIC, 0000110037 BEAUMONT ROAD BANBURY, OX GB, OX16 1TG TEL: 01295 250826 FAX: 01295 268643 Class: C MANUFACTURER METTIS AEROSPACE LTD., WINDSOR ROAD Class: A SUBCONTRACTORS 0000121668 Specification Controlled: PSPEC 300 PENETRANT FLAW DETECTION Page 500 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification REDDITCH, WC GB, B97 6EF TEL: 0152740 6400-301 FAX: 0152760 818 C MANUFACTURER METZELER SCHAUM GMBH, 0000123902 DONAUSTRABE 51 MEMMINGEN, 09 DE, 87700 TEL: 8331830250 FAX: 8331 83015 457 Class: C MANUFACTURER MEUPE S.L. - MECANIZADOS EULOGIO PE, P.I. LA ERA EMPEDRADE UMBRETE, 41 ES, 41806 TEL: 954 18 41 03 FAX: 954 18 27 05 0000125763 Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Specification Controlled: PPS 20.08 HARDNESS TESTING PPS 30.06 PRECIPITATION HARDENABLE (PH) STAINLESS STEEL PPS 30.12 STEEL HEAT TREATMENT - GENERAL MGS - MODULAR GALLEY SYSTEMS AG, 0000129290 NERSINGER STR. 14-16 ELCHINGEN, 09 DE, 89275 TEL: 7308 8118 23 FAX: 7308 8118 80 Class: B EQUIPMENT SUPPLIERS MGS PRECISION LIMITED, 0000130900 NEWCASTLE ST. STONE, ST GB, ST15 8JU TEL: 017 858 15544 FAX: 017 858 15544 Class: A SUBCONTRACTORS Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Electro Chemical Etch of Titanium Alloys Only. MHI AEROSPACE PRODUCTION, 0000108263 2-3-41 TOBESHITA MANAMI-KU NAGOYA, 23 JP, 4570842 TEL: 052 698 3601 FAX: 052 698 3611 Class: A SUBCONTRACTORS Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 157-27 INTEGRAL FUEL TANK SEALING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT PPS 02.70 INSTALLATION OF ADHESIVE BONDED FASTENERS PPS 21.21 GENERAL SEALING PRACTICES PPS 25.23 EC-1300 ADHESIVE PPS 25.55 EC-1357N ADHESIVE Specification Controlled with Limitations: Page 501 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Limited to touch-up only. BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Limited to touch-up only. BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to type II application. BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS Limitation: On the premises of MHI Oye plant. BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... Limitation: On the premises of MHI Oye plant. PPS 34.08 EPOXY PRIME Limitation: Limited to touch-up only. MHI AEROSPACE PRODUCTION, 0000127037 10 OYE-CHO, MINATO-KU NAGOYA, 23 JP, 4550024 TEL: 52 611 9591 FAX: 52 611 9598 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 138-49 APPLICATION OF BAMS 565-013 HEAT RESISTANT COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 161-007 APPLICATION OF MIL-L-46010 SOLID FILM LUBRICANT BAPS 161-008 APPLICATION OF MIL-81329 SOLID FILM LUBRICANT BAPS 180-001 ALKALINE CLEANING BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS Specification Controlled with Limitations: BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Limitation: AMCHEM 7-17 SOLUTION ONLY MHI CANADA AEROSPACE INC., 6390 NORTHWEST DR. 0000120182 Class: A SUBCONTRACTORS Systems with Limitations: 2101 MRB APPROVAL - MINOR ONLY Page 502 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address MISSISSAUGA, ON CA, L5N 5N1 TEL: 905 816 9140 FAX: 905 816 0982 Classification Learjet Approved Suppliers Scope of Approval Limitation: Wings of the Challenger 350 Limitation: Wings of the Challenger 350 Limitation: Wings of the Global 5000/6000 Specification Controlled: BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING BAPS 145-004 INSTALLATION OF MECHANICALLY ATTACHED TERMINALS BAPS 145-006 TERMINATION OF THE SHIELD ON SHIELD ON SHIELDED WIRE AND CABLE BAPS 145-008 STOWAGE OF ELECTRICAL WIRING AND CONNECTORS BAPS 157-27 INTEGRAL FUEL TANK SEALING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 157-32 HIGH TEMPARATURE SEALING FOR NON -FUEL TANK APPLICATIONS BAPS 174-18 INSTALLATION OF DEUTSCHLITE DPL SERIES FITTINGS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS CAPTIVE LABORATORY MPS 145-25 CERTIFICATION OF CRIMPING TOOL OPERATORS Specification Controlled with Limitations: BAPS 136-120 POLISHING OF ALUMINUM ALLOY SKIN Limitation: Manual polishing to Type II finish (Reflective bright finish). BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: TOUCH-UP surface no larger than 4 in² ONLY . BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: TOUCH-UP surface no larger than 4 in² ONLY . BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: to Method 1 ONLY BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual Riveting ONLY . BAPS 151-40 INSTALLATION OF HIGH INTERFERENCE RIVETS (SLUG RIVETS) Limitation: Automatic installation Limited to Type I - Class 1 and Type II installation Limitation: GEMCOR Model: Limitation: (MHICA NA #1 AR / GRS5017SX109-G86 and MHICA NA Page 503 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval #2 AR / G4026SXX/LA-120) Limitation: Manual installation with Rivet Gun No NFGX 107 BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING Limitation: to touch-up ONLY . BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: to Type 2 Touch-up using Alodine 1201 ONLY BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: to Type 2 Touch-up ..using Alodine 1000RTU for Electrical Bonding ONLY . BAPS 174-08 ASSEMBLY AND INSTALLATION OF FLARELESS FITTINGS ON PLUMBING LINES Limitation: to Final Assembly installation ONLY BAPS 174-09 INSTALLATION OF WIGGINS TYPE COUPLINGS ON RIGID PLUMBING LINES Limitation: to Retainer Assembly ONLY BAPS 174-16 ASSEMBLY AND INSTALLATION OF SIERRACIN/HARRISON SLEEVES AND UNIONS ON PLUMBING LINES Limitation: to Final Assembly Installation ONLY BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES Limitation: INSTALLATION ONLY . BAPS 185-02 SHOT PEENING OF METAL PARTS Limitation: to manual rotary peening for rework ONLY . BAPS 188-02 COLD WORKING OF HOLES Limitation: to Type 1, Split Sleeve Cold Working MI-TECH METALS, INC., 0000131683 4701 MASSACHUSETTS AVE. INDIANAPOLIS, IN US, 46218 TEL: 317 549 4290 FAX: 317 549 4295 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM no 973 MIANDA RESOURCES, 0000101516 1318 CONCORD ST. LOWELL, AR US, 72745-9647 TEL: 561 644 6668 FAX: 479 659 8836 Class: D DISTRIBUTOR Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 504 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification MICHELIN AIRCRAFT TIRE CORP., 0000100584 40589 STANLY SCHOOL ROAD S. NORWOOD, NC US, 28128-8753 TEL: 866 778 8473 FAX: 856-914-6981 Class: B EQUIPMENT SUPPLIERS MICHELIN LPAV, 0000126459 PLACE DES CARMES-DECHAU X 63040 CLERMONT-FERNAND CEDEX9, 18 FR, 18230 TEL: 248688600 FAX: 248688889 Class: B EQUIPMENT SUPPLIERS MICHIGAN SEAMLESS TUBE LLC., 0000119978 400 MCMUNN ST. SOUTH LYON, MI US, 48178-1379 TEL: 800-521-8416 FAX: 248-486-0296 Class: C MANUFACTURER MICO MACHINE CO., 0000111135 390 S. REYNOLDS LA GRANGE, TX US, 78945 TEL: 979 968 9528 FAX: 979 968 5351 Class: C MANUFACTURER MICRO PLASTICS INC., 0000110681 11 INDUSTRY LANE FLIPPIN, AR US, 72634 TEL: 870 453 2261-... FAX: 870 453 8676 Class: A SUBCONTRACTORS C MANUFACTURER MICRO SEMI LAWRENCE, 0000108849 6 LAKE ST. LAWRENCE, MA US, 01841-3032 TEL: 978 620 2615 FAX: 978 689 0803 Class: C MANUFACTURER MICROFLEX INC., 0000108582 1800 US HWY. 1 N. ORMOND BEACH, FL US, 32174-2578 Class: B EQUIPMENT SUPPLIERS Learjet Approved Suppliers Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: tubing to Mil-T 6736 , all BA pgrograms Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: LIMITED TO DRAWING NO, DSC 197 ONLY Page 505 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 386 677 8100-107 FAX: 386 672 7623 MICROMO ELECTRONICS INC., 0000120195 14881 EVERGREEN AVE. CLEARWATER, FL US, 33762-3008 TEL: 727 572 0131 FAX: 727 573 5918 Class: C MANUFACTURER MICROPUMP INC., 0000107210 1402 NE 136TH AVE. VANCOUVER, WA US, 98684-0818 TEL: 360 253 3220 FAX: 800 222 9565 Class: B EQUIPMENT SUPPLIERS MICROSEMI CORP. COLORADO, 0000111152 800 HOYT ST. BROOMFIELD, CO US, 80020 TEL: 303 469 2161 FAX: 303 466 3775 Class: C MANUFACTURER MICROSEMI IRELAND, 0000123275 GORT ROAD ENNIS, CL IE, 0 TEL: 65 68 69 115 FAX: 65 68 69 115 Class: C MANUFACTURER MICROSS COMPONENTS INC., 0000131325 2294 NORTH PENN ROAD HATFIELD, PA US, 19440 TEL: 215 997 3200 FAX: 215 997 2966 Class: C MANUFACTURER MICROTECH INC., 0000100998 1425 HIGHLAND AVE. RT 10 CHESHIRE, CT US, 06410-1216 TEL: 203 272 3234-126 FAX: 203 271 0352 Class: B EQUIPMENT SUPPLIERS MICROTECNICA S.R.L., 0000101586 PIAZZA ARTURO GRAF, 147 TORINO, TO Class: B EQUIPMENT SUPPLIERS Page 506 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval IT, 10126 TEL: 0116932566 FAX: 0116932483 MICROTECNICA S.R.L., 0000107174 VIA SAN MAURIZIO AL LAMBRO BRUGHERIO, MI IT, 20047 TEL: 039 289 4823 FAX: 039 289 4912 Class: B EQUIPMENT SUPPLIERS MICROTURBO APU, LLC, 0000135169 4255 RUFFIN ROAD, SUITE A SAN DIEGO, CA US, 92123 TEL: 1 858 223 2246 FAX: 999 999 9999 Class: B EQUIPMENT SUPPLIERS MID CONTINENT CONTROLS INC., 0000102112 901 N. RIVER DERBY, KS US, 67037 TEL: 316 789 0088 FAX: 316 789 0072 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval MCZR365X & EASA dual approval EASA.145.5545. MID-CONTINENT INSTRUMENTS &, 0000100988 9400 E. 34TH ST. N. WICHITA, KS US, 67226-2615 TEL: 316 630 0101 FAX: 316 630 0723 Class: E MAINTENANCE ORGANIZATION MID-STATE AEROSPACE INC., 0000101436 710 N. LINDENWOOD DR. OLATHE, KS US, 66062-1877 TEL: 913 764 3600 FAX: 913 764 8115 Class: C MANUFACTURER D DISTRIBUTOR MIDDLESEX GROUP LTD., 0000110042 TELFORD ROAD BASINGSTOKE, HA GB, RG21 6YU TEL: 44 1256 353711 FAX: 44 1256 842613 Class: A SUBCONTRACTORS MIDWAY AIRCRAFT INSTRUMENT CORP., 1419 NORTH ROCKY RIVER ROAD Class: B EQUIPMENT SUPPLIERS 0000102481 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 507 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval MONROE, NC US, 28110 TEL: 704-993-2100 FAX: 704-993-2099 E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval QY2R126L & EASA dual approval EASA.145.4678. MIDWEST AERO SUPPORT INC., 0000108620 1303 TURRET DR. MACHESNEY PARK, IL US, 61115-1452 TEL: 815 398 9202 FAX: 815 398 9308 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval MXSR849K & EASA dual approval EASA.145.4679. MIDWEST AIRCRAFT PRODUCTS CO., 0000110764 125 S. MILL ST. LEXINGTON, OH US, 44904-9571 TEL: 614-407-0626 FAX: 419-884-2331 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: In accordance with FAA Repair Station Approval # OT5R105N MIDWEST MARKING PRODUCTS, INC, 0000101386 401 N WACO WICHITA, KS US, 67202 TEL: 316 264 7351 FAX: 316 264 7922 Class: A SUBCONTRACTORS MIDWEST PLASTICS SUPPLY INC., 0000100927 2248 S. MEAD ST. WICHITA, KS US, 67211-5020 TEL: 316 267 7511 FAX: 316 267 0928 Class: D DISTRIBUTOR MIDWEST SECURITY PRODUCTS, 0000101615 3840 HERR ROAD SYLVANIA, OH US, 43560-8925 TEL: 419 534 6886 FAX: 419 534 6888 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods MIKRON MUHENDISLIK LTD. STI, 0000131638 1376. SOK. NO 28 . IVEDIK Ankara, 06 TR, 06378 TEL: 00903123944787 FAX: 514-855-5001 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAPS 160-34 ZINC-NICKEL ALLOY PLATING BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Page 508 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT BAPS 168-15 STRESS RELIEF OF METALS BAPS 180-001 ALKALINE CLEANING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY MIL TECH INC., 0000107635 7405 W. VICKERY FORT WORTH, TX US, 76116-9253 TEL: 817 732 8000 FAX: 817 732 2808 Class: D DISTRIBUTOR MIL-COM COMPONENTS INC., 0000101745 770-4 BROADWAY AVENUE HOLBROOK, NY US, 11741 TEL: 631 588 2400-304 FAX: 631 588 2499 Class: D DISTRIBUTOR MILLENIUM MACHINE & TOOL INC., 0000108536 900 1ST ST. W. NEWTON, KS US, 67114-3326 TEL: 316-282-0884 FAX: 316 283 6678 Class: A SUBCONTRACTORS MILLENNIUM INTERNATIONAL, 0000133849 P.O. BOX 903 LEE'S SUMMIT, MO US, 64063 TEL: 816 524 7777 FAX: 816 554 0042 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Limitation: FAA Repair Station approval M7XR967N & EASA dual Limitation: approval EASA.145.4680 MILLER-STEPHENSON CHEMICAL CO., 0000102366 55 BACKUS AVE. DANBURY, CT US, 06810-7328 TEL: 203-743-4447 FAX: 203-791-8702 Class: C MANUFACTURER D DISTRIBUTOR MILTOPE CORP., Class: 0000110381 Page 509 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 3800 RICHARDSON ROAD S. HOPE HULL, AL US, 36043-4017 TEL: 334 284 8665 FAX: 334 280 7029 C MANUFACTURER MINEBEA CO. LTD., 0000124042 1-1-1 KATASE FUJISAWA CITY, 37 JP, 2519999 TEL: 466 23 2131 FAX: 466 23 2430 Class: C MANUFACTURER MINI-MAC INC., 0000101199 1703 SOUTHWEST BLVD. WICHITA, KS US, 67213 TEL: 316 733 0661 FAX: 316 733 4250 Class: C MANUFACTURER MINOR RUBBER CO. INC., 0000107219 49 ACKERMAN ST. BLOOMFIELD, NJ US, 07003-4253 TEL: 973 338 6800 FAX: 973 893 1399 Class: C MANUFACTURER MIROIR BROT, 0000127024 99 RUE DU FAUBOURG DU TEMPLE PARIS, 75 FR, 75010 TEL: 142 084 890 FAX: 142 013 479 Class: H COMMERCIAL OFF THE SHELF MISSOURI METALS LLC., 0000107745 9970 PAGE BLVD. ST-LOUIS, MO US, 63132-1431 TEL: 314-222-7115 FAX: 314 222 7102 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS PPS 01.02 FORMING ALUMINUM ALLOYS PPS 01.36 FORMING OF TITANIUM AND TITANIUM ALLOYS PPS 20.03 PENETRANT FLAW DETECTION PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS PPS 30.14 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS PPS 31.09 CLEANING OF TITANIUM MISTRAS SERVICES, Class: Specification Controlled: 0000108680 Page 510 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 8427 ATLANTIC AVE. CUDAHY, CA US, 90201-5809 TEL: 323 583 1653 FAX: 323 560 1627 A SUBCONTRACTORS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 176-17 RADIOGRAPHIC INSPECTION LES 1004 PENETRANT INSPECTION LES 1006 INSPECTION, MAGNETIC PARTICLE LES 1210 SONIC, INSPECTION MPS 176-07 ULTRASONIC INSPECTION OF WROUGHT METALS PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION PPS 20.04 ULTRASONIC INSPECTION PSPEC 305 RADIOGRAPHIC EXAMINATION MISTRAS SERVICES INC., 0000107262 915 ST-CHARLES ST-LAMBERT, QC CA, J4P 2A2 TEL: 450 671 0220 FAX: 450 466 4158 Class: A SUBCONTRACTORS Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Specification Controlled: BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 176-17 RADIOGRAPHIC INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS MPS 176-07 ULTRASONIC INSPECTION OF WROUGHT METALS MPS 250-301 PENETRANT INSPECTION PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION PPS 20.04 ULTRASONIC INSPECTION Specification Controlled with Limitations: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: LIMITED TO ELECTRICAL CONDUCTIVITY TESTING OF METALS MIT DISTRIBUTORS INC., 0000107863 12300 FORD ROAD, SUITE B306 FARMERS BRANCH, TX US, 75234 Class: D DISTRIBUTOR Page 511 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 770 698-1913 FAX: 770 698-1901 MITCHELL AEROSPACE INC., 0000107811 350 DECARIE ST-LAURENT, QC CA, H4L 3K5 TEL: 514 748 3447 FAX: 514 747 1593 Class: C MANUFACTURER MITCHELL LABS. INC., 0000107794 7707 BEQUETTE AVE. PICO RIVERA, CA US, 90660-4503 TEL: 562 949 6144 FAX: 562 949 7584 Class: A SUBCONTRACTORS Specification Controlled: BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS LES 1004 PENETRANT INSPECTION LES 1006 INSPECTION, MAGNETIC PARTICLE PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION PPS 20.04 ULTRASONIC INSPECTION MITSUBISHI, 0000108426 1230 KAMIHIDEYA OKEGAWA, 11 JP, 3639999 TEL: 48 786 3332 FAX: 48 770 1012 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Class: F STRUCTURAL SUPPLIER Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** MITSUBISHI HEAVY INDUSTRIES LTD., 10 OYE-CHO, MINATO-KU NAGOYA, 23 JP, 4558515 TEL: 52 611 2144 FAX: 52 611 9358 0000103016 Page 512 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAERD-GEN-018-2E MECHANICAL TESTING: PLASTICS, RUBBERS STATIC AND ELASTIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-3E WELDING EVALUATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-4C TESTING OF THERMAL PROPERTIES (EXPANSIONS, TMA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5F FUELS, LUBRICANTS, SOLVENTS (FORMERLY IE) BAERD-GEN-018-5G PLASTICS, RUBBERS (FORMERLY 1D) BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 138-45 APPLICATION OF CMS 565-12 CONDUCTIVE COATING TO PLASTIC SURFACES BAPS 138-49 APPLICATION OF BAMS 565-013 HEAT RESISTANT COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 155-074 STRUCTURAL ADHESIVE BONDED ASSEMBLIES FOR USE UP TO 180 DEGREE F (250 DEGREE F CURE) BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-09 CHROMIUM PLATING OF STEELS HEAT TREATED TO LESS THAN 220,000 PSI AND COPPER ALLOYS BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-28 CHROMIUM PLATING OF STEELS HEAT TREATED TO ABOVE 220 KSI Page 513 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 160-31 LOCALIZED BRUSHING PLATING BAPS 160-32 SULFURIC ACID ANODIZING BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 161-007 APPLICATION OF MIL-L-46010 SOLID FILM LUBRICANT BAPS 161-008 APPLICATION OF MIL-81329 SOLID FILM LUBRICANT BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 168-14 HEAT TREATMENT OF STEELS BAPS 168-15 STRESS RELIEF OF METALS BAPS 168-20 HEAT TREATMENT OF COPPER AND COPPER ALLOYS BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 174-08 ASSEMBLY AND INSTALLATION OF FLARELESS FITTINGS ON PLUMBING LINES BAPS 174-09 INSTALLATION OF WIGGINS TYPE COUPLINGS ON RIGID PLUMBING LINES BAPS 174-16 ASSEMBLY AND INSTALLATION OF SIERRACIN/HARRISON SLEEVES AND UNIONS ON PLUMBING LINES BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES BAPS 174-18 INSTALLATION OF DEUTSCHLITE DPL SERIES FITTINGS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-14 NITAL ETCH INSPECTION OF STEEL PARTS BAPS 176-17 RADIOGRAPHIC INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-11 CLEANING AND DEOXIDIZING COPPER AND COPPER ALLOYS BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 185-02 SHOT PEENING OF METAL PARTS Page 514 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 185-03 PEEN FORMING OF METAL PARTS BAPS 186 CHEMICAL MILLING OF ALUMINUM BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... BAPS 260-03 POTTING OF HONEYCOMB SANDWICH PANELS CAPTIVE LABORATORY MPS 155-113 SURFACE TREATMENT OF TITANIUM FOR ADHESIVE BONDING MPS 160-08 CADMIUM PLATING OF CARBON AND LOW ALLOY STEELS BELOW 220,000PSI, COPPER ALLOYS AND CRES STEELS MPS 160-27 CADMIUM PLATING OF CARBON AND LOW ALLOY HEAT TREATED TO 220-240 KSI AND ABOVE MPS 176-07 ULTRASONIC INSPECTION OF WROUGHT METALS Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: > large parts in oven # 5F7-37 ONLY . Limitation: > Convection ovens: # RE-626, # 50000006219 , # 50000006220 at normal operating temp. of 70ºC ( 158ºF) BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Limitation: AMCHEM 7-17 SOLUTION ONLY. BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS MITSUBISHI HEAVY INDUSTRIES LTD., 0000109153 5 KANAOKA /MPS 5TH TENT HOUSE/MR motoji TOBISHIMA-MURA, AMA-GUN, 23 JP, 4901445 TEL: 52 611 2143 FAX: 52 612 3009 Class: F STRUCTURAL SUPPLIER Systems with Limitations: 2101 MRB APPROVAL - MINOR ONLY Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 151-40 INSTALLATION OF HIGH INTERFERENCE RIVETS (SLUG RIVETS) BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-27 INTEGRAL FUEL TANK SEALING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 174-09 INSTALLATION OF WIGGINS TYPE COUPLINGS ON RIGID PLUMBING LINES Page 515 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES BAPS 174-18 INSTALLATION OF DEUTSCHLITE DPL SERIES FITTINGS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 188-02 COLD WORKING OF HOLES Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: Limitation to Drying oven # Y230532001-23 Only . BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: LIMITED TO INSTALLATION OF COTTER PIN ONLY BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to type II application only. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to type II application only. BAPS 185-02 SHOT PEENING OF METAL PARTS Limitation: Limited to rotary peening only. MJ SECTIONS LTD., 0000117731 MARRIOTT ROAD INDUSTRIAL ESTATE, CRADLEY NETHERTON , DUDLEY, WM GB, DY2 0JZ TEL: 01384 456086 FAX: 01384 256964 Class: A SUBCONTRACTORS MOELLER MFG. & SUPPLY INC., 0000101301 805 E. CERRITOS AVE. ANAHEIM, CA US, 92805-6328 TEL: 714 999 5551 FAX: 714 999 5970 Class: C MANUFACTURER MOHAWK CARPET INDUSTRIES, 0000108172 300 LANDRUM MILL ROAD LANDRUM, SC US, 29356-9799 TEL: (864) 457-9206 FAX: 864 457 4033 Class: C MANUFACTURER MOHAWK FINISHING PRODUCTS INC, 3194 HICKORY BLVD HUDSON, NC Class: H COMMERCIAL OFF THE SHELF 0000132872 Page 516 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 28638 TEL: 800 522 8826 FAX: 828 728 2409 MOLEX INC., 0000103258 2222 WELLINGTON CT. LISLE, IL US, 60532-3831 TEL: 630 527 4436 FAX: 630 969 1352 Class: C MANUFACTURER MOMENTIVE PERFORMANCE MATERIALS, 0000108296 420 N. TAYLOR ROAD GARRETT, IN US, 46738-1846 TEL: 260 357 2025 FAX: 260 357 6165 Class: C MANUFACTURER MOMENTIVE PERFORMANCE MATERIALS, 0000102717 260 HUDSON RIVER ROAD WATERFORD, NY US, 12188-1910 TEL: 518 237 3330 FAX: 518 233 3529 Class: C MANUFACTURER MONAERO ENGINEERING INC., 0000119913 17011 INDUSTRY PLACE LA MIRADA, CA US, 90638-5819 TEL: 714 994 5463 FAX: 714 994 5497 Class: H COMMERCIAL OFF THE SHELF MONOGRAM AEROSPACE FASTENERS, INC, 0000101880 3423 GARFIELD AVE. S. LOS ANGELES, CA US, 90040-3103 TEL: 323 722 4760 FAX: 323 721 1851 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER MOOG AIRCRAFT GROUP, 0000103186 2268 S. 3270 W. SALT LAKE CITY, UT US, 84119-1112 TEL: 801 974 7597 FAX: 801 974 7370 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval QG5R144N & EASA dual approval EASA.145.4806. MOOG COMPONENTS GROUP INC., 750 SPROUL ROAD W. Class: B EQUIPMENT SUPPLIERS 0000107785 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: See EMCM Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 517 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval SPRINGFIELD, PA US, 19064-4001 TEL: 610 328 4000-315 FAX: 610 605 6216 E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval L17R251Y & EASA dual approval EASA.145.5497. MOOG INC., 0000101606 20263 WESTERN AVE. TORRANCE, CA US, 90501-1310 TEL: 310 490 4234 FAX: 310 618 6512 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Limitation in Accordance with FAA repair station approval no. ND13344K & EASA 145.4684 MOOG INC., 0000103709 160 JAMISON ROAD EAST AURORA, NY US, 14052 TEL: 716 687 4163 FAX: 716 687 5969 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval ND1R344K & EASA dual approval EASA.145.4685. MOOG WOLVERHAMPTON LTD., 0000101630 VALIANT WAY WOLVERHAMPTON, WM GB, WV9 5GB TEL: 1902 39 7700 FAX: 1902 38 4394 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval DQD4021K & EASA dual approval UK 145.00806. MOORE & GILES, INC, 0000123382 1081 TANNERY ROW FOREST, VA US, 24551-3920 TEL: 434 846 5281 FAX: 434 846 1404 Class: H COMMERCIAL OFF THE SHELF MOREGGIA AERONAUTICHE SPA, 0000108767 CORSO PASTENGO, 36, COLLEGNO TORINO, PC IT, 10093 TEL: 11 402 8416 FAX: 11 4028 436 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Page 518 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 185-02 SHOT PEENING OF METAL PARTS Specification Controlled with Limitations: BAPS 161-007 APPLICATION OF MIL-L-46010 SOLID FILM LUBRICANT Limitation: HEAT TREAT FURNACE RQM 520 ONLY MORESCO CO. LTD, 0000133557 641 TENWA AKOH CITY, 28 JP, 6780256 TEL: +81 0791 42 2012 FAX: +81 0791 43 0 Class: C MANUFACTURER MORGAN ADVANCED CERAMICS, 0000103836 CENTRAL PARK DR., CENTRAL PARK RUGBY, WA GB, CV23 0WE TEL: 01788 542166 FAX: 01788 579787 Class: C MANUFACTURER MORGAN HINGES INC., 0000127049 10260 BOWLING GREEN DR. FRISCO, TX US, 75035 TEL: 469 362 8090 FAX: E-MAIL ONLY Class: H COMMERCIAL OFF THE SHELF MORRELLS ELECTRO PLATING INC., 0000120545 432 EUCLID AVE. COMPTON, CA US, 90222 TEL: 310 639 1024 FAX: 310 603 9729 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Product purchase prior to December 15-2013 is acceptable for depletion of stock purpose only Specification Controlled: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING MORTON MANUFACTURING CO., 0000135183 201 EAST AVENUE K15 LANCASTER, CA US, 93535 TEL: 661-298-0895 FAX: 661-298-8172 Class: C MANUFACTURER Page 519 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval MORTON MANUFACTURING CO., 0000135184 17341 W. SIERRA HWY SANTA CLARITA, CA US, 91351 TEL: 661-298-0895 FAX: 661-298-8172 Class: C MANUFACTURER MOTION CANADA, 0000110587 330, AVE. AVRO POINTE-CLAIRE, QC CA, H9R 5W5 TEL: 514 459 3301 FAX: 514 335 8899 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods MOULDSPEED, 0000110907 11-12-16 STILEBROOK ROAD YARDLEY ROAD I. OLNEY, BU GB, MK46 5EB TEL: 01234 711216 FAX: 01234 240921 Class: C MANUFACTURER MOUNT JOY WIRE CORP, 0000133784 1000 E. MAIN STREET MOUNT JOY, PA US, 17552 TEL: 717 653 1461 FAX: 717 653 6144 Class: C MANUFACTURER MOYOLA PRECISION ENGINEERING, 0000109039 6-8 CURRAN ROAD CASTLEDAWSON MAGHERAFELT, LD GB, BT45 8AF TEL: 2879 468349 FAX: 2879 468349 Class: A SUBCONTRACTORS MPB CORP., 0000108863 7 OPTICAL AVE. KEENE, NH US, 03431-4320 TEL: 603 352 0310 FAX: 603 355 4553 Class: C MANUFACTURER MPC INDUSTRIES, 2150 MCGAW AVE. IRVINE, CA US, 92614 Class: A SUBCONTRACTORS 0000122251 Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Specification Controlled: BAPS 136-120 POLISHING OF ALUMINUM ALLOY SKIN Page 520 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 949-863-1440 FAX: 949-474-1268 MPM INC., 0000101686 2100 WEST ST. S. WICHITA, KS US, 67213-1112 TEL: 316 945 1227 FAX: 316 945 3111 Class: A SUBCONTRACTORS MS AEROSPACE, 0000107226 13928 BALBOA BLVD. SYLMAR, CA US, 91342-1086 TEL: 818 833 9095 FAX: 818 833 9525 Class: C MANUFACTURER MSA AIRCRAFT PRODUCTS INC, 0000102060 10000 IOTA DR. SAN ANTONIO, TX US, 78217-2628 TEL: 210 590 6100 FAX: 210 590 6884 Class: E MAINTENANCE ORGANIZATION MSB DESIGN INC, 0000123378 333-I CHEMIN DU TREMBLAY BOUCHERVILLE, QC CA, J4B 7M1 TEL: 514 667-9399-506 FAX: 514 667 9393 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS MSP INC., 0000100849 239 GRIMES LANE W. BLOOMINGTON, IN US, 47403-3015 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Touch-up only BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Installation of cotter pins only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual installation only BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Wet installation of fasteners and rivets only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Touch-up only Page 521 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 812 333 6100 FAX: 812 333 6111 MTI MASKING INNOVATIONS INC, 0000109051 680, BOUL. LEMIRE DRUMMONDVILLE, QC CA, J2C 7W9 TEL: 888-477-4189 FAX: 819-477-4193 Class: A SUBCONTRACTORS D DISTRIBUTOR MTI-POLYFAB, 0000102074 7381 PACIFIC CIR. MISSISSAUGA, ON CA, L5T 2A4 TEL: 905 564 9700-... FAX: 905 564 8886 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS Specification Controlled with Limitations: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: LIMITED TO P/N 601R41300 & 600-42044 MTS Systems Corporation, 0000107227 14000 Technology Drive Eden Prairie, MN US, 55344-2290 TEL: 919 677 0100 FAX: 919 677 2343 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to CL415 products. MUELLER FITTINGS CO. INC., 0000115071 3400 MUELLER BRASS ROAD COVINGTON, TN US, 38019 TEL: 901 751 7721 FAX: 901 751 7710 Class: C MANUFACTURER MUIRHEAD AEROSPACE AVIONICS, 0000122613 3, THE SQUARE HEATHROW SOUTHALL LANE, SOUTHHALL, MX GB, UB2 5NH TEL: 44 0208 6765249 FAX: 44 0208 571233 Class: E MAINTENANCE ORGANIZATION MULTIMESH (UK) LTD, 0000135348 EUROLINK HOUSE, LEA GREEN INDUSTRIAL EST SAINT HELENS, MY GB, WA9 4QU TEL: 44 1744 820 666 FAX: 44 1744 821 41 Class: C MANUFACTURER MURDOCK ELECTRIC & SUPPLY CO., 1111 E. FIRST ST. WICHITA, KS Class: D DISTRIBUTOR 0000100851 Page 522 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 67214-3904 TEL: 316-262-0401 FAX: 316-263-8100 McSTARLITE CO., 0000110032 1531 240TH ST. W. HARBOR CITY, CA US, 90710-1308 TEL: 310 325 2063 FAX: 310 325 9682 Class: A SUBCONTRACTORS NAASCO NORTHEAST CORP., 0000133559 222 GRAND AVE. SHIRLEY, NY US, 11967 TEL: 631 399 2244 FAX: 631 399 2275 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: In accordance with FAA repair station approval FD1R135K and EASA145.4687 NABTESCO AEROSPACE INC., 0000116152 12413 WILLOWS ROAD N.E. KIRKLAND, WA US, 98034 TEL: 425-602-8411 FAX: 425 602 8408 Class: Systems with Limitations: C MANUFACTURER 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval HV6R601N & EASA dual approval EASA.145.4917. NABTESCO COPRORATION, 0000108514 1110-1 MIYASHIRO, TARUI-CHO FUWA-GUN, 21 JP, 5032192 TEL: 58 422 3121 FAX: 58 423 1961 Class: Systems with Limitations: C MANUFACTURER 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION NAGOYA QUALITY ASSURANCE, 0000120683 2-98-1 KOSHIN-CHO, ATSUTA-KU NAGOYA, 23 JP, 4560064 TEL: 052 681 1891 FAX: 052 681 2488 Class: A SUBCONTRACTORS NAMEPLATE MANUFACTURERS OF AMERICA, 65 TOLEDO ST. FARMINGDALE, NY Specification Controlled: PSPEC 401 HEAT TREATMENT OF ALUMINIUM AND ALUMINIUM ALLOYS PSPEC 442 SULPHURIC ACID ANODISING Specification Controlled: BAPS 176-17 RADIOGRAPHIC INSPECTION Specification Controlled with Limitations: PPS 20.06 ULTRASONIC INSPECTION OF FIBRE REINFORCED COMPOSITE PARTS - CERTIFIED PERSONNEL REQUIRED Limitation: On the premises of MHI Oye plant. QAMTR 034 NON DESTRUCTIVE TESTING REQUIREMENT FOR DASH-8 LEADING EDGES WITH COLD BOUNDED ICER BOOTS Limitation: On the premises of MHI Oye plant. 0000101707 Class: C MANUFACTURER Page 523 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 11735 TEL: 631 752 0055 FAX: 631 752 3324 NANCE MANUFACTURING INC, 0000101396 2005 WEST ST. S. WICHITA, KS US, 67213-1109 TEL: 316 942 8671 FAX: 316 942 0818 Class: A SUBCONTRACTORS NAPA / CMAX LASALLE 520, 0000127594 7214 NEWMAN LASALLE, QC CA, H8N 1X2 TEL: 514 365 2651 FAX: 514 365 6182 Class: H COMMERCIAL OFF THE SHELF NASMYTH TECHNOLOGIES LTD., 0000131411 78-82 COBHAM ROAD, FERNDOWN WIMBORNE, DO GB, BH21 7RW TEL: 01202 895080 FAX: 01202 895080 Class: A SUBCONTRACTORS NATIONAL AEROSPACE FASTENERS CORPOR, 0000137378 N0.5 TAI-PING EAST ROAD, PIN-JEN DISTRIC TAOYUAN CITY, 310 CN, 999999 TEL: 886-3-450-8868 FAX: 886-3-460-418 Class: C MANUFACTURER NATIONAL BOLT & NUT CORP., 0000108520 144 COVINGTON DR. BLOOMINGDALE, IL US, 60108-3105 TEL: 630 307 8800 FAX: 630 307 8870 Class: C MANUFACTURER NATIONAL CARPET EQUIPMENT INC., 0000126964 9250 XYLON AVE. N. MINNEAPOLIS, MN US, 55445 TEL: 763 535 8206 FAX: 763 535 8255 Class: H COMMERCIAL OFF THE SHELF NATIONAL FLOORING EQUIPMENT INC., 9250 XYLON AVENUE NORTH Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS 0000118468 Page 524 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval MINNEAPOLIS, MN US, 55445 TEL: 800 245 0267 FAX: 800 648 7124 NATIONAL INDUSTRIAL EQUIPMENT, 0000109321 1221 MONTEE-DE-LIESSE ST-LAURENT, QC CA, H4S 1J7 TEL: 514 333 3350-223 FAX: 514 332 3353 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods NATIONAL INSTITUTE FOR AVIATION RES, 1845 FAIRMOUNT WICHITA, KS US, 67260-0093 TEL: 316 978 6427 FAX: 316 978 3175 Class: A SUBCONTRACTORS 0000125671 Specification Controlled: BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4C TESTING OF THERMAL PROPERTIES (EXPANSIONS, TMA, ETC.) INDEPENDANT LABORATORY Specification Controlled with Limitations: BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS Limitation: Limited to flat test panels only NATIONAL INSTITUTE FOR AVIATION RES, 4004 N. WEBB ROAD WICHITA, KS US, 67227 TEL: 316 978 7272 FAX: 999 999 9999 0000130521 NATIONAL INSTITUTE FOR AVIATION RES, 1229 E 85TH ST. NORTH PARK CITY, KS US, 67147 TEL: 316 978 8204 FAX: 316 978 8204 0000131560 NATIONAL INSTRUMENTS PRODUCTS, Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: BAPS 260-013 FABRICATION OF 250 DEGREE F-300 DEGREE F(121 DEGREE C-149 DEGREE C)CURE STRUCTURAL COMPOSITE LAMINATES AND SANDWICH COMPONENTS 0000106514 Class: A SUBCONTRACTORS Class: Page 525 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 11500 N. MOPAC EXPY., NO.13 AUSTIN, TX US, 78759 TEL: 512 250 9119 FAX: 512 683 5794 C MANUFACTURER D DISTRIBUTOR E MAINTENANCE ORGANIZATION NATIONAL PRECISION BEARING GROUP, 0000101318 8152 304TH AVE. S. E. PRESTON, WA US, 98050 TEL: 425-441-1279 FAX: 425 222 5950 Class: D DISTRIBUTOR NATIONAL RESEARCH COUNCIL, 0000119919 1200 MONTREAL ROAD, BLDG. U61 OTTAWA, ON CA, K1V 2B1 TEL: 613 998 3070 FAX: 613 991 9960 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Canadian AMO approval 40-00 & EASA dual approval EASA.145.7196. NATIONAL RIVET & MFG. CO., 0000107231 21 E. JEFFERSON ST. WAUPUN, WI US, 53963-1942 TEL: 888 324 5511 FAX: 920 324 3388 Class: C MANUFACTURER NATIONAL SEALANTS & LUBRICANTS INC., 33110 OLD HEMPSTEAD ROAD MAGNOLIA, TX US, 77355-1641 TEL: 800 527 0011 FAX: 281 259 0303 0000101691 Class: D DISTRIBUTOR NATIONAL UTILITIES CO. / NUCO, 0000100961 1700 HICKORY DR. FORT WORTH, TX US, 76117-6020 TEL: 817 838 2020 FAX: 817 838 6826 Class: C MANUFACTURER NATIONWIDE PREMIUM SALES, 0000117314 180 NORSEMAN ST. TORONTO, ON CA, M8Z 2R4 TEL: 416 239 7323 FAX: 416 239 9632 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods Page 526 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification NATVAR A TEKNI-PLEX CO., 0000115828 19555 ARENTH AVE. E. CITY OF INDUSTRY, CA US, 91748-1403 TEL: 909 594 3660 FAX: 909 595 2414 Class: H COMMERCIAL OFF THE SHELF NAVAERO AVIONICS AB, 0000130473 FORADSGATAN 4 SUNDSVALL, 017 SE, 856 33 TEL: 46 60664100 FAX: 999 999 9999 Class: C MANUFACTURER NC DYNAMICS INC., 0000108806 3401 69TH ST. E. LONG BEACH, CA US, 90805-1872 TEL: 562-634-7392 FAX: 562-634-6220 Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 175-006 INSTALLATION OF BUSHING USING FORCEMATE COLD EXPANSION PROCESS Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: to Electrochemical Etch Marking on Titanium ONLY . BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Method 1: Lockwire ONLY BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: to shrink fit with dry ice or liquid nitrogen ONLY . NCI CANADA INC., 0000125429 66 DON HILLOCK DR. AURORA, ON CA, L4G 0H6 TEL: 905 727 5545 FAX: 905 727 4088 Class: H COMMERCIAL OFF THE SHELF NDT EXPERT, 0000134814 18 RUE MARIUS TERCE TOULOUSE, 31 FR, 31024 TEL: 999 999 9999 FAX: 999 999 9999 Class: A SUBCONTRACTORS Specification Controlled: BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS Page 527 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval NDT SERVICES LTD., 0000126495 UNIT 10-A, VICTORIA PARK, VICTORIA ROAD DERBY, DB GB, DE24 8ZF TEL: 01509 680088 FAX: 01509 680080 Class: A SUBCONTRACTORS NELSON-MILLER INC., 0000100973 2800 CASITAS AVE. LOS ANGELES, CA US, 90039-2942 TEL: 323 663 3971-269 FAX: 323 661 2137 Class: B EQUIPMENT SUPPLIERS NEMA LTD., 0000107927 LOMAX ST. ROCHDALE, LA GB, OL12 OHD TEL: 1706 640442 FAX: 1706 640444 Class: C MANUFACTURER NEONICKEL BLACKBURN, 0000107994 WALKER INDUSTRIAL ESTATE BLACKBURN, BB GB, BB1 2QE TEL: 1254 582999 FAX: 1254 582666 Class: D DISTRIBUTOR Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS NEOVIA LOGISTICS, 0000117719 HANS-BOECKLER-STRASSE 9 GROSS-GERAU, 06 DE, 64521 TEL: 06152 97910 FAX: 999 999 9999 Class: J LOGISTIC PROVIDER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Third party provider who partners with Bombardier regarding distribution activities. Limitation: Quality System requirements; as per contract. NEOVIA LOGISTICS SERVICES, LLC, 0000117553 251 WILLE ROAD DES PLAINES, IL US, 60018-1861 TEL: 847 553 0101 FAX: 847 553 0103 Class: J LOGISTIC PROVIDER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Third party provider who partners with Bombardier regarding distribution activities. Limitation: Quality System requirements; as per contract. NET MRO INC., 0000105413 8940 NW 24TH TERRACE Class: D DISTRIBUTOR Page 528 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval MIAMI, FL US, 33172-2429 TEL: 305 717 6577 FAX: 305 717 6578 NEW ENGLAND ELECTRIC WIRE CORP., 0000108474 130 N. MAIN ST. LISBON, NH US, 03585-6603 TEL: 603 838 6625 FAX: 603 838 6160 Class: C MANUFACTURER NEW HAMPSHIRE BALL BEARINGS INC, 0000101011 155 LEXINGTON DR. LACONIA, NH US, 03246-2993 TEL: 603 524 0004 FAX: 603 524 9025 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER NEW HAMPSHIRE BALL BEARINGS INC., 0000100174 9700 INDEPENDENCE AVE. CHATSWORTH, CA US, 91311-4323 TEL: 818 407 9300 FAX: 818 407 5020 Class: C MANUFACTURER NEW HAMPSHIRE BALL BEARINGS INC., 0000100176 175 JAFFREY ROAD PETERBOROUGH, NH US, 03458-1709 TEL: 603 924 3311 FAX: 603 924 4419 Class: C MANUFACTURER NEW JERSEY SEMI-CONDUCTOR, 0000107238 20 STERN AVE. SPRINGFIELD, NJ US, 07081-2905 TEL: 973 376 2922 FAX: 973 376 8960 Class: C MANUFACTURER NEWAGE INDUSTRIES INC., 0000101881 145 JAMES WAY ROAD SOUTHAMPTON, PA US, 18966-3817 TEL: 215 526 2300 FAX: 215 526 21916 Class: C MANUFACTURER NEWARK WIRE CLOTH CO., Class: 0000107240 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM #768 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: LIMITED To PLASTIC TUBING Page 529 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 160 FORNELIUS AVE. CLIFTON, NJ US, 07013-1844 TEL: 973 778 4478 FAX: 973 778 4481 B EQUIPMENT SUPPLIERS NEXANS, 0000107456 600 S. PARKER ST. ELM CITY, NC US, 27822 TEL: 252 236 6235 FAX: 252 236 3613 Class: C MANUFACTURER NEXANS FRANCE, 0000130529 140-146 EUGENE-DELACROIX DRAVEIL, 91 FR, 91210 TEL: 0169837800 FAX: 0169422970 Class: B EQUIPMENT SUPPLIERS NEXUS INC., 0000107641 50 SUNNYSIDE AVE. STAMFORD, CT US, 06902-7641 TEL: 203-327-7300 FAX: 203-324-7623 Class: C MANUFACTURER NGK METALS CORP., 0000108493 917 US HWY. 11 S. SWEETWATER, TN US, 37874-5730 TEL: 800 523 8268 FAX: 877 645 2328 Class: C MANUFACTURER NIACC TECHNOLOGY INC., 0000110802 245 W. DAKOTA AVE. CLOVIS, CA US, 93612 TEL: 559 291 2500 FAX: 559 347 6817 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS NIAGARA PLASTIC CO., 0000103225 7090 EDINBORO ROAD ERIE, PA US, 16509-4497 TEL: 814 868 3671 FAX: 814 864 2423 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 530 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval NIAR - ASTEC, 0000126160 370 N. WEBB, BLDG. 40 WICHITA, KS US, 67201-2578 TEL: 316 978 6139 FAX: 999 999 9999 Class: A SUBCONTRACTORS NIBCO INC., 0000118306 1516 MIDDLEBURY ST. EIKHART, IN US, 46516-4740 TEL: 574 295 3000 FAX: 574 295 3307 Class: C MANUFACTURER NICHOLL ENGINEERING LTD., 0000110046 11 MULLUSK DR. MALLUSK ENTREPR. PRK MALLUSK, AT GB, BT36 4GX TEL: 02890 840176 FAX: 02890 840148 Class: A SUBCONTRACTORS NICHOLSONS SEALING TECHNOLOGIES LTD, 0000103025 AMOS DRIVE, GREENCROFT INDUSTRIAL PARK STANLEY, DU GB, DH9 7YE TEL: 44 0 1207 523010 FAX: 514 855 5000 Class: B EQUIPMENT SUPPLIERS NIENKAMPER FURNITURE & ACC. INC., 0000110593 257 FINCHDENE SQUARE, UNIT 6 SCARBOROUGH, ON CA, M1X 1B9 TEL: 416 297 5700 FAX: 888 888 8888 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods NIHON TOKUSHU TORYO CO., LTD., 0000130929 1-10, NAGATORO HIRATSUKA-SHI, 14 JP, 2548503 TEL: 81 3 3913 6141 FAX: 81 3 3914 1082 Class: C MANUFACTURER NIKKISO CO LTD .,, 3-1, HOKUYOUDAI KANAZAWA-SHI, 17 Class: B EQUIPMENT SUPPLIERS 0000135103 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to part no T45SUVN01,T45FVVN03-4, U45BC-V 3/4, U45TB-V 1, 21810008 Limitation: called on Bombardier drawing no 215T40008 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Supplier (#718) approved for Fluid Resistant Epoxy Primer as listed in EMCM-001 Page 531 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval JP, 9200177 TEL: 999 999 9999 FAX: 999 999 9999 NIKKISO CO. LTD., 0000121262 20-3, EBISU 4 - CHOME SHIBUYA-KU, 13 JP, 1506022 TEL: 81 3 3443 3734 FAX: 3 3443 9863 Class: B EQUIPMENT SUPPLIERS NIPPON PRECISION CASTING CORP., 0000115877 1-5 MIHARADAI CHONANCHO CHOSEIGUN, 12 JP, 2970143 TEL: 475 46 1916 FAX: 475 46 2886 Class: A SUBCONTRACTORS C MANUFACTURER Specification Controlled: PPS 20.03 PENETRANT FLAW DETECTION PPS 30.01 HEAT TREATMENT OF ALUMINUM ALLOYS PPS 35.07 REQUIREMENTS FOR INVESTMENT AND SAND CASTINGS PPS 37.03 FUSION WELDING OF ALUMINUM AND ALUMINUM ALLOYS PPS 37.06 TESTING AND APPROVAL OF AIRCRAFT WELDERS PPS 37.10 REQUIREMENTS FOR FUSION WELDS NIPPON STEEL & SUMIKIN TECHNOLOGY C, 5-1-109 SHIMAYA OSAKA, 27 JP, 5540024 TEL: 6 6466 6153 FAX: 81 6 6413 2401 0000132041 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: ISO/IEC 17025:2005 NIPPON STEEL & SUMITOMO METAL CORP., 12-1 2-CHROME MINATO-CHO JOETSU-CITY, NIIGATA PREFECTURE, 15 JP, 9428510 TEL: 25 544 6611 FAX: 25 544 6643 0000108990 Class: C MANUFACTURER NITTO DENKO AUTOMOTIVE NEW JERSEY I, 1990 RUTGERS UNIVERSITY BLVD. LAKEWOOD, NJ US, 08701 TEL: 732 901 7905 FAX: 732 334 4985 0000128004 Class: C MANUFACTURER NKK SWITCHES, 0000103485 Specification Controlled: BAERD-GEN-018-1G GASES, INCLUDING GASES IN METALS (GC, MS, ETC) INDEPENDANT LABORATORY Class: Page 532 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 7850 E. GELDING DR. SCOTTSDALE, AZ US, 85260-2950 TEL: 480 991 0942 FAX: 480 998 1435 C MANUFACTURER NLMK PENNSYLVANIA CORP, 0000111127 15 ROEMER BLVD. FARRELL, PA US, 16121-2201 TEL: 724 983 1511 FAX: 724 342 6574 Class: C MANUFACTURER NMB - MINEBEA THAI LTD., 0000129932 5/2 MOO 8, PHAHOLYOTHIN ROAD AMPHOE MUANG, 22 TH, 15000 TEL: 02253 4897 FAX: 999 999 9999 Class: C MANUFACTURER NMB MINEBEA CO. LTD., 0000108894 4106-73 OAZA MIYOTA, MIYOTA-MACHI KITASAKU-GUN, 20 JP, 3890293 TEL: 26 731 1260 FAX: (0)3 5434 8607 Class: C MANUFACTURER NMB-MINEBEA UK LIMITED, 0000110081 2 DODDINGTON ROAD LINCOLN, LI GB, LN6 3RA TEL: 1522 500933 FAX: 1522 696485/500975 Class: C MANUFACTURER NMF EUROPA S. A., 0000109018 CALLE DE ANDALUCIA S/N. TARAZONA, 50 ES, 50500 TEL: 976 199 154 FAX: 9761 99159 Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-27 INTEGRAL FUEL TANK SEALING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Page 533 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 160-10 CHROMIC ACID ANODIZING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 185-02 SHOT PEENING OF METAL PARTS BAPS 185-03 PEEN FORMING OF METAL PARTS CAPTIVE LABORATORY PPS 20.03 PENETRANT FLAW DETECTION PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 32.02 MANUAL APPLICATION OF CHEMICAL CONVERSION COATINGS PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 34.08 EPOXY PRIME Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limitation to preparation only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: TYPE 2 ONLY BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: TYPE 2 ONLY BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Limitation: limited to anvil swaging PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS Limitation: Limited for F21 Primer Only NMG AEROSPACE, 0000121257 4880 HUDSON DR. Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Page 534 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval STOW, OH US, 44224-1708 TEL: 330 688 6494 FAX: 330 688 6952 NO-GLARE ARCHITECTURAL GLASS, 0000108159 440 EDGELEY BLVD. CONCORD, ON CA, L4K 4G4 TEL: 905 738 2115 FAX: 905 738 9989 Class: A SUBCONTRACTORS NOELLE INDUSTRIES INC., 0000115675 76 TREBLE COVE ROAD, BUILDING 3, UN NORTH BILLERICA, MA US, 01862 TEL: 978 439 9841 FAX: 978 439 9842 Class: C MANUFACTURER NORANCO INC., 0000107186 710 ROWNTREE DAIRY ROAD WOODBRIDGE, ON CA, L4L 5T7 TEL: 905 264 2050-380 FAX: 905 264 1471 Class: A SUBCONTRACTORS Specification Controlled: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS LES 1015 WELDING FUSION, ALUMINUM ALLOYS PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 25.52 EC-2216 B/A GREY ADHESIVE PPS 25.55 EC-1357N ADHESIVE PPS 37.03 FUSION WELDING OF ALUMINUM AND ALUMINUM ALLOYS PPS 37.04 FUSION WELDING OF FERROUS AND NICKEL ALLOYS PPS 37.06 TESTING AND APPROVAL OF AIRCRAFT WELDERS Specification Controlled with Limitations: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: LIMITED TO INSTALLATION OF BUSHING AND HARDWARE ONLY BAPS 188-02 COLD WORKING OF HOLES Limitation: Limited to type 1 only Page 535 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PPS 32.02 MANUAL APPLICATION OF CHEMICAL CONVERSION COATINGS Limitation: Limitation to Touch-up ONLY . PPS 34.08 EPOXY PRIME Limitation: Touch up only NORANCO INC., 0000105938 1842 CLEMENTS ROAD PICKERING, ON CA, L1W 3R8 TEL: 905-831-0100-260 FAX: 905 831 0104 Class: A SUBCONTRACTORS Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Specification Controlled: BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS CAPTIVE LABORATORY MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 PPS 01.02 FORMING ALUMINUM ALLOYS PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 34.08 EPOXY PRIME PPS 37.03 FUSION WELDING OF ALUMINUM AND ALUMINUM ALLOYS PPS 37.04 FUSION WELDING OF FERROUS AND NICKEL ALLOYS PPS 37.06 TESTING AND APPROVAL OF AIRCRAFT WELDERS PPS 37.10 REQUIREMENTS FOR FUSION WELDS Specification Controlled with Limitations: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION Limitation: evaluation of solution make up for touch-up by brush alodine application. BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Page 536 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval Limitation: Limitation to preparation only, excluding application of protective-conductive treatment BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING Limitation: limited to Rayrim Edge Protective material BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Lock wire installation BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 2 touch-up by brush alodine application. BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Installation using liquid nitrogen only MPS 250-201 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES AEROSPATIALE A330/A340 PROGRAM Limitation: limited to Non-Instrusive Marking Method only PPS 21.20 MIXING AND HANDLING TWO PART SEALANTS PPS 21.21 GENERAL SEALING PRACTICES Limitation: limitation to Para 5.4 ( Faying Surface Sealing ) & Para 5.5 ( Fillet Sealing ) NORANCO INC., 0000101809 55-A WESTCREEK DR. VAUGHAN, ON CA, L4L 9N6 TEL: 905 856 1801-240 FAX: 905-856-5286 Class: A SUBCONTRACTORS NORDAM EUROPE LTD., HAWTIN PARK BLACKWOOD, GW Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: EASA approval N1EY636N & FAA Repair Station dual 0000110305 Specification Controlled: PPS 20.07 CONDUCTIVITY TESTING PPS 21.21 GENERAL SEALING PRACTICES Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: limited to non intrusive method only BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: ''Rockwell Hardness and Superficial Hardness Testers'' Only PPS 20.08 HARDNESS TESTING Limitation: ''Rockwell Hardness and Superficial Hardness Testers'' Only PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS Limitation: Limited to manual touch up only Page 537 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification GB, NP12 2EU TEL: 1443 865400 FAX: 1443 865411 Learjet Approved Suppliers Scope of Approval approval UK.145.00530. NORDAM GROUP INC., 0000100270 6911 WHIRLPOOL DR. TULSA, OK US, 74117-1306 TEL: 918-401-5494 FAX: 918 878 4032 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: In accordance with FAA Repair Station Approval # NZ6R569Y Limitation: In accordance with European Aviation Safety Agency # EASA.145.5283 NORDEX, 0000107244 426 FEDERAL ROAD BROOKFIELD, CT US, 06804-2018 TEL: 203 775 4877 FAX: 203 775 6552 Class: C MANUFACTURER NORDUYN INC., 0000107241 6200 HENRI-BOURASSA O. MONTREAL, QC CA, H4R 1C3 TEL: 514 334 3210 FAX: 514 334 2989 Class: C MANUFACTURER NORMA PENNSYLVANIA, 0000106808 3582 TUNNELTON ROAD SALTSBURG, PA US, 15681-9594 TEL: 724 639 3671 FAX: 724 639 3020 Class: C MANUFACTURER NORTH AMERICAN STAINLESS, 0000108626 6870 HWY. 42 E. GHENT, KY US, 41045-8451 TEL: 502 347 6000 FAX: 502 347 6061 Class: C MANUFACTURER NORTH EAST FASTENERS CORP., 0000124523 8 TREMCO DR. TERRYVILLE, CT US, 06786-7312 TEL: 860-589-3242 FAX: 860-589-6969 Class: C MANUFACTURER Page 538 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval NORTH HILLS SIGNAL PROCESSING, 0000104787 6851 JERICHO TPKE. SYOSSET, NY US, 11791-4494 TEL: 516-682-7758 FAX: 516 682 7704 Class: C MANUFACTURER NORTHEAST LOCK CORP., 0000101995 48 OAK ST. CLIFTON, NJ US, 07014-1704 TEL: 800 524 2575 FAX: 800 524 2576 Class: C MANUFACTURER NORTHERN COMPOSITES, INC., 0000102375 102 TIDE MILL ROAD HAMPTON, NH US, 03842 TEL: 603 926 1910 FAX: 603 926 0598 Class: D DISTRIBUTOR NORTHERN COMPOSITES, INC., 0000128957 114 E. MEADOWVIEW ROAD GREENSBORO, NC US, 27406 TEL: 336 373 5933 FAX: 336 373 5934 Class: D DISTRIBUTOR NORTHROP GRUMMAN INTERNATIONAL, 0000101050 21240 BURBANK BLVD. WOODLAND HILLS, CA US, 91367-6675 TEL: 818 715 2426 FAX: 818 715 4749 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION NORTHROP GRUMMAN LITEF GMBH, 0000108586 LORRACHER STRASSE 18 FREIBURG, 08 DE, 79115 TEL: 761 4901-516 FAX: 761 4901-1516 Class: C MANUFACTURER NORTHWINGS ACCESSORIES CORP, 7875 NW 64TH ST. MIAMI, FL US, 33166 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: In accordance with FAA certificate no NWQR356K 0000130419 Page 539 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 305 463 0455-... FAX: 305 463 9339 NORWICH AERO PRODUCTS INC, 0000103489 50 OHARA DR. NORWICH, NY US, 13815-2029 TEL: (714) 736-7573 FAX: 607-336-2610 Class: C MANUFACTURER NOVAGARD INC., 0000108466 5109 HAMILTON AVE. CLEVELAND, OH US, 44114-3907 TEL: 800-380-0138 FAX: 216-881-6977 Class: C MANUFACTURER NOVATRONICS INC., 0000103781 677 ERIE ST. STRATFORD, ON CA, N5A 6V6 TEL: 480 758 6026-... FAX: 519 271 6133 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION NSE AUTOMATECH INC., 0000108282 520 RUTHERFORD GRANBY, QC CA, J2G 0B2 TEL: 450 378 7207-253 FAX: 450 378 9651 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Specification Controlled with Limitations: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Cutter Pins ONLY . BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual operation ONLY NU-PRO LTD., 0000110658 EAGLE WORKS LONDON ROAD THRUPP STROUD, GL GB, GL5 2BA TEL: 01453 883344 FAX: 01453 731597 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) BAPS 160-09 CHROMIUM PLATING OF STEELS HEAT TREATED TO LESS Page 540 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval THAN 220,000 PSI AND COPPER ALLOYS BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-28 CHROMIUM PLATING OF STEELS HEAT TREATED TO ABOVE 220 KSI BAPS 160-32 SULFURIC ACID ANODIZING BAPS 161-007 APPLICATION OF MIL-L-46010 SOLID FILM LUBRICANT BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS MPS 160-08 CADMIUM PLATING OF CARBON AND LOW ALLOY STEELS BELOW 220,000PSI, COPPER ALLOYS AND CRES STEELS PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION PPS 31.05 SURFACE TREATMENTS OF CORROSION RESISTANT STEELS PPS 32.01 CROMATE CONVERSION COATING PPS 32.03 CHROMIC ACID ANODIZING (A1) PPS 32.05 SULPHURIC ACID ANODISING PPS 33.01 CADMIUM PLATING (E1) PPS 33.04 HARD CHROMIUM PLATE PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PSPEC 300 PENETRANT FLAW DETECTION PSPEC 301 MAGNETIC PARTICLE INSPECTION PSPEC 403 CADMIUM PLATING OF CARBON, LOW ALLOY AND STAINLESS STEELS PSPEC 410 CHROMIC ACID ANODISING PSPEC 411 SULPHURIC ACID ANODISING PSPEC 416 PASSIVATION OF AUSTENITC, MARTENSITIC AND PH STEELS PSPEC 419 CHEMICAL CONVERSION COATING OF ALUMINIUM AND ALUMINIUM ALLOYS PSPEC 910 ETCH AND EPOXY PRIMING Page 541 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval NU-TECH ASSOCIATES, 0000110595 685 ORLY AVE. DORVAL, QC CA, H9P 1G1 TEL: 514 636 8809 FAX: 514 636 9771 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Canadian AMO Approval 34-93 & EASA dual Approval EASA 145.7071 NUMERICRAFT INC., 0000116034 1665 W. MODERN CT. TUCSON, AZ US, 85705-1948 TEL: 520 887 7570 FAX: 520 887 5589 Class: A SUBCONTRACTORS NYCO, 0000131321 66 AVE. DES CHAMPS ELYSEES BP 414 PARIS, 75 FR, 75366 TEL: 33 1456 15000 FAX: 33 1456 15013 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS NYE LUBRICANTS INC., 0000111011 12 HOWLAND ROAD FAIRHAVEN, MA US, 02719-3453 TEL: 508 996 6721 FAX: 508 997 5285 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Approved for NYOSIL M-25 Lubricant NYLOK FASTENER CORP., 0000107253 15260 HALLMARK DR. MACOMB, MI US, 48042-4007 TEL: 810 786 0100 FAX: 810 786 0498 Class: C MANUFACTURER NYLOK FASTENER CORP., 0000107252 313 N. EUCLID WAY ANAHEIM, CA US, 92801-6738 TEL: 951-642-3790 FAX: 951-481-8981 Class: C MANUFACTURER NYLON MOLDING CORP., 0000102742 2755 THOMPSON CREEK ROAD POMONA, CA US, 91767-1861 Class: C MANUFACTURER Page 542 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 909 451 2290 FAX: 909 593 8309 O'FALLON CASTINGS, LLC, 0000107077 600 CANNONBALL LANE O'FALLON, MO US, 63366-4411 TEL: 636 272 6176 FAX: 636 272 0280 Class: C MANUFACTURER O2 CORP., 0000101432 235 WASHINGTON N. WICHITA, KS US, 67202-2817 TEL: 316-634-1240 FAX: 316 634 1061 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER OAO KUMZ, 0000120009 5 ZAVODSKAYA ST. KAMENSK URALSKY, 66 RU, 623405 TEL: 34393 95708 FAX: 999 999 9999 Class: C MANUFACTURER OCE-CANADA INC., 0000131351 4767 LEVY ST LAURENT, QC CA, H4R 2P9 TEL: 514 745 6363 FAX: 514 745 6165 Class: H COMMERCIAL OFF THE SHELF OEMETA CHEMISCHE WERKE GMBH, 0000134919 OSSENPADD 54 UETERSEN, 01 DE, 25436 TEL: 49 4122 024 0 FAX: 49 4122 024 160 Class: C MANUFACTURER OERLIKON METCO WOKA GMBH, 0000128642 IM VORWERK 25 BARCHFELD, 16 DE, 36456 TEL: 36961 8610 FAX: 36961 86130 Class: C MANUFACTURER OFS FITEL SPECIALITY FIBER, 55 DARLING DR. AVON, CT Class: A SUBCONTRACTORS 0000109167 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM-001 supplier #242 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Refer to EMCM-001 # 1051 Page 543 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval US, 06001-4273 TEL: 860 678 6544 FAX: 860 674 8818 OHIO GASKET & SHIM CO., 0000107256 976 EVANS AVE. AKRON, OH US, 44305-1019 TEL: 800-321-2438 FAX: 330-630-2075 Class: C MANUFACTURER OHMITE MFG., 0000119683 2400 COURAGE BLVD. BROWNSVILLE, TX US, 78521-5160 TEL: 847 258 0300 FAX: 868 812 9570 Class: C MANUFACTURER OHSHIMA IRELAND LTD, 0000133894 93-94 SHANNON FREE ZONE WEST SHANNON, CL IE, ****** TEL: 353 1 883 7900 FAX: 353 1 883 7930 Class: A SUBCONTRACTORS OKAS ENDUSTRIYEL YUZEY ISLEM KIMYEV, 0000132609 Ivedik Organize Sanaya Bolgesi, AGAC ISL ANKARA, 06 TR, 06370 TEL: 514 855 5000 FAX: 514 855 5000 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Learjet Programs Only Limitation: Conditional pending validation of QMS Accreditation Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-23 HARD ANODIZING OF ALUMINUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION Page 544 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 180-001 ALKALINE CLEANING BAPS 180-11 CLEANING AND DEOXIDIZING COPPER AND COPPER ALLOYS BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY OKE AUTOMOTIVE GMBH & CO. .KG, 0000136495 NOBELSTRASSE 7 HORSTEL, 05 DE, 48477 TEL: 49 545 991 4256 FAX: 49 545 991 455 Class: H COMMERCIAL OFF THE SHELF OMAHA AIRPLANE SUPPLY CO., 0000101614 1101 AVE. H, SUITE G CARTER LAKE, IA US, 51510-1565 TEL: 800 228-9400 FAX: 712 347 6600 Class: B EQUIPMENT SUPPLIERS D DISTRIBUTOR OMEGA ENGINEERING INC., 0000107259 1 OMEGA DR. STAMFORD, CT US, 06907-2336 TEL: 888 826 6342 FAX: 203 968 7142 Class: C MANUFACTURER D DISTRIBUTOR OMEGA RESEARCH INCORPORATED, 0000130337 15843 GUY JAMES ROAD JUSTIN, TX US, 76247 TEL: 940 648 5828 FAX: 940 648 1760 Class: A SUBCONTRACTORS OMEGADYNE INC., 149 STELZER CT. SUNBURY, OH US, 43074-8528 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER 0000107881 Specification Controlled: BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-5A CORROSION TESTING INDEPENDANT LABORATORY Page 545 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 740 965 9340 FAX: 740 965 9438 OMNI AEROSPACE INC., 0000107642 3130 W PAWNEE WICHITA, KS US, 67213 TEL: 316-529-8998 FAX: 316-529-8995 Class: A SUBCONTRACTORS C MANUFACTURER D DISTRIBUTOR Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to surface preparation only. BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to manual riveting only. BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Limitation: Hardness testing limited to Rockwell testing only. OMNI METAL FINISHING INC., 0000136024 11665 COLEY RIVER CIRCLE FOUNTAIN VALLEY, CA US, 92708-4216 TEL: 888-268-5270 FAX: 714-662-5949 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-5A CORROSION TESTING Specification Controlled with Limitations: BAPS 160-34 ZINC-NICKEL ALLOY PLATING Limitation: Type II Class 2 ON SEMICONDUCTOR, 0000108689 5005 E MC DOWELL ROAD PHOENIX, AZ US, 85008-4229 TEL: 602 244 6600 FAX: 602 244 3967 Class: C MANUFACTURER ON-GO, INC., 0000131708 10807 BURBANK DR. POTOMAC, MD US, 20854 TEL: 3017658030 FAX: 3017658031 Class: H COMMERCIAL OFF THE SHELF ONE-WAY MANUFACTURING INC, 1195N OSPREY CIRCLE ANAHEIM, CA Class: A SUBCONTRACTORS 0000131101 Specification Controlled: BAPS 174-02 FABRICATION OF PLUMBING LINES Page 546 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limited to Electrochemical Etch Only US, 92807 TEL: 714 630 8833 FAX: 714 630 8833 ONLINE GRAPHICS & FINISHING, INC., 0000130010 1924 N. LIME ST. ORANGE, CA US, 92865 TEL: 714 635 3790 FAX: 714 635 9765 Class: A SUBCONTRACTORS ONTIC ENGINEERING & MFG. UK LTD., 0000130778 BISHOPS CLEEVE CHELTENHAM, GL GB, GL52 8TW TEL: 44 0 333 2408... FAX: 44 0 333 2408 Class: B EQUIPMENT SUPPLIERS ONTIC ENGINEERING MFG. INC., 0000100914 20400 PLUMMER ST. CHATSWORTH, CA US, 91311-5372 TEL: 818 725 2134 FAX: 818 725 2535 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval OE6R225J & EASA dual approval EASA.145.5322. OPTI MFG. CORP., 0000101293 MATA DE PLATANO IND PARK LUQUILLO, PR PR, 00773 TEL: 787 889 2285 FAX: 787 889 2805 Class: B EQUIPMENT SUPPLIERS OPTIMUM TECHNOLOGIES INC., 0000109043 570 JOE FRANK HARRIS PKWY. CARTERSVILLE, GA US, 30120-6618 TEL: 770 386 3470 FAX: 770 382 9047 Class: C MANUFACTURER OPW ENGINEERED SYSTEMS, 0000118473 2726 HENKLE DR. LEBANON, OH US, 45036-8209 TEL: 800 547 9393 FAX: 800 245 8536 Class: H COMMERCIAL OFF THE SHELF Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM #910 Page 547 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval ORAFOL AMERICAS, 0000134447 1100 ORACAL PARKWAY BLACK CREEK, GA US, 31308 TEL: 912 851 5007 FAX: 912 851 5060 Class: C MANUFACTURER ORANGE PRODUCTS INC., 0000137357 1929 VULTEE ST. ALLENTOWN, PA US, 18103 TEL: 610-791-9711 FAX: 610-791-9531 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM supplier #795 ORCO TOOL & MACHINE LLC., 0000119169 701 S. PRAIRIE CUBA, MO US, 65453 TEL: 573 885 4286 FAX: 573 885 7696 Class: A SUBCONTRACTORS Specification Controlled: BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING ORCON AEROSPACE, 0000102418 1570 ATLANTIC ST. UNION CITY, CA US, 94587-2006 TEL: 800 228 2781 FAX: 800 457 3410 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER OROLIA S.A.S., 0000128160 ZI LE HIREGOAT GUIDEL, 56 FR, 56520 TEL: 297 024 949 FAX: 297 650 020 Class: B EQUIPMENT SUPPLIERS OSBORN & JACKSONLEA, Class: 0000108435 Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to Faying Surface Bond (FAY-MM) and Interface Fit Fasteners (IFF-MM) methods only. BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to manual Riveting only. BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Limited to Fay, Fillet, and wet installation of fasteners only. BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limited to Liquid Nitrogen Method Only. Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: DE HAVILLAND PROGRAMS LIMIT TO P/N OT-6 ONLY.SEE EMCM Systems with Limitations: Page 548 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 3440 SYMMES ROAD HAMILTON, OH US, 45015 TEL: 800 537 8449 FAX: 513 860 8732 C MANUFACTURER OSHINO LAMPS LTD., 0000108687 2-5-2 MINAMI SHINAGAWA TOKYO, 13 JP, 1409999 TEL: 3472 1706 FAX: 3450 3939 Class: C MANUFACTURER OSRAM SYLVANIA INC., 0000108234 131 PORTSMOUTH AVE. EXETER, NH US, 03833-2105 TEL: 603 772 4331 FAX: 603 772 1072 Class: B EQUIPMENT SUPPLIERS OSVIMA S.A. & MONTEC S.L., 0000125295 C/DESARROLLO NO. 9 GETAFE, 28 ES, 28096 TEL: 9160 10439 FAX: 9160 11138 Class: A SUBCONTRACTORS OTTAWAY ENGINEERING LIMITED, 0000131606 Renown Close Eastleigh, HA GB, SO53 4HZ TEL: 02380269977 FAX: 514-855-5001 Class: A SUBCONTRACTORS OTTO AVIONICS REPAIR CENTER, 0000132656 9450 CHIVERS AVE. SUN VALLEY, CA US, 91352 TEL: 909-930-5800 FAX: 909 247 2679 Class: E MAINTENANCE ORGANIZATION Scope of Approval 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Specification Controlled: BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limitation to manual riveting only BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limitation to use of Alodine 1132 Prep-pen BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limitation to Nitrogen cooling Page 549 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification OTTO ENGINEERING INC., 0000101405 2 MAIN ST. E. CARPENTERSVILLE, IL US, 60110-2624 TEL: 847 654 8236 FAX: 847 428 1956 Class: C MANUFACTURER OTTO FUCHS METALLWERKE, 0000109119 DERSCHLAGER STRABE 26 MEINERZHAGEN, 01 DE, 58540 TEL: 514 555 1212 FAX: 999 999 9999 Class: C MANUFACTURER OTTO INSTRUMENT SERVICE, 0000106539 1441 VALENCIA PLACE ONTARIO, CA US, 91761-7639 TEL: 909 930 5800 FAX: 909 930 5808 Class: E MAINTENANCE ORGANIZATION OUTILS DIACARB INC., 0000124684 2525 DE MINIAC ST-LAURENT, QC CA, H4S 1E5 TEL: 514 331 4360 FAX: 514 331 2694 Class: A SUBCONTRACTORS OUTOKUMPU STAINLESS BAR, INC., 0000135127 3043 CRENSHAW PKWY. RICHBURG, SC US, 29729 TEL: 1 888 458 4600 FAX: 1 803 789 3177 Class: C MANUFACTURER OUTOKUMPU STAINLESS OY, 0000108457 FI-95400 TORNIO TORINO, 005 FI, 95400 TEL: 8262 66111 FAX: 8262 65300 Class: C MANUFACTURER Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited for BICCM Part no`s: Limitation: 7002500130-001 floor plate assy, 7002500162-001 floor plate assy, 70025201172-001 Limitation: hinge block assy, 7002521714-001 hinge block, BCPC08-005 Isolator, GM25244006-035 Limitation: handle, GM25254026-026 retainer, GM25254026-029 retainer, GM53000186-047 retainer Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 550 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval OUTOKUMPU STAINLESS PLATE INC., 0000133118 549 W STATE ROAD 38 NEW CASTLE, IN US, 47362 TEL: 765 529 0120 FAX: 765 529 8177 Class: C MANUFACTURER OWL WIRE & CABLE INC., 0000107265 3127 SENECA TPKE. CANASTOTA, NY US, 13032-3512 TEL: 315 697 2011 FAX: 315 697 2123 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 322 OXWELL INC., 0000107643 600 E. 16TH ST. WELLINGTON, KS US, 67152-2803 TEL: 620 326 7481 FAX: 620 326 5594 Class: A SUBCONTRACTORS Specification Controlled: LES 1047 CHEMICAL FILM TREATMENT, APPLICATION OF - ALUMINUM ALLOYS LES 1051 HEAT TREAT OF ALUMINUM ALLOYS P&C SERVICE CO. LTD., 0000124113 28 KAMIHATA ARAOCHO TOKAISHI, 23 JP, 4760015 TEL: 052 803 8956 FAX: 052 603 8956 Class: A SUBCONTRACTORS Specification Controlled with Limitations: BAPS 174-02 FABRICATION OF PLUMBING LINES Limitation: Limitation to pressure tests ONLY. BAPS 174-08 ASSEMBLY AND INSTALLATION OF FLARELESS FITTINGS ON PLUMBING LINES Limitation: Limitation to pressure tests ONLY. BAPS 174-09 INSTALLATION OF WIGGINS TYPE COUPLINGS ON RIGID PLUMBING LINES Limitation: Limitation to pressure tests ONLY. BAPS 174-16 ASSEMBLY AND INSTALLATION OF SIERRACIN/HARRISON SLEEVES AND UNIONS ON PLUMBING LINES Limitation: Limitation to pressure tests ONLY. BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES Limitation: Limitation to pressure tests ONLY. BAPS 174-18 INSTALLATION OF DEUTSCHLITE DPL SERIES FITTINGS Limitation: Limitation to pressure tests ONLY. P. M. RESEARCH INC., 4110 NILES HILL ROAD WELLSVILLE, NY US, 14895-9608 Class: C MANUFACTURER H COMMERCIAL OFF THE SHELF 0000107295 Page 551 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 585 593 3169 FAX: 585 593 5637 PAC FOUNDRIES - RANCHO, 0000107558 11000 JERSEY BLVD. RANCHO CUCAMONGA, CA US, 91730-5103 TEL: 909 987 4721-237 FAX: 909 980 7958 Class: A SUBCONTRACTORS C MANUFACTURER Specification Controlled: LES 1004 PENETRANT INSPECTION LES 1183 WELDING, REPARI - COROSION RESISTANT STEEL CASTINGS LES 1198 QUALIFICATION OF AIRCRAFT CASTINGS LES 1218 INSPECTION, RADIOGRAPHIC - CASTINGS PAC SEATING SYSTEMS INC., 0000116221 3370 S.W. 42ND AVE. PALM CITY, FL US, 34990 TEL: 772 286 6670 FAX: 772 286 2313 Class: C MANUFACTURER PACIFIC FORGE INC., 0000125697 10641 ETIWANDA AVE. FONTANA, CA US, 92337-6909 TEL: 909-390-0701 FAX: 909-390-0708 Class: A SUBCONTRACTORS C MANUFACTURER Specification Controlled with Limitations: PPS 35.04 REQUIREMENTS FOR STEEL FORGINGS Limitation: Limited to Visual , dimensional inspection and flash removal PACIFIC MAGNETIC, 0000107801 6837 FARMDALE AVE. N. HOLLYWOOD, CA US, 91605-6209 TEL: 818 765 7266 FAX: 818 765 3355 Class: A SUBCONTRACTORS Specification Controlled: PPS 20.03 PENETRANT FLAW DETECTION PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 31.05 SURFACE TREATMENTS OF CORROSION RESISTANT STEELS PPS 31.09 CLEANING OF TITANIUM PACIFIC METALLURGICAL INC., 0000107267 925 5TH AVE. S. KENT, WA US, 98032-5825 TEL: 253 854 4241 FAX: 253 854 4475 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 168-14 HEAT TREATMENT OF STEELS BAPS 168-15 STRESS RELIEF OF METALS BAPS 168-19 CARBURIZING OF STEEL BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS BAPS 180-001 ALKALINE CLEANING PPS 20.08 HARDNESS TESTING PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS PPS 30.06 PRECIPITATION HARDENABLE (PH) STAINLESS STEEL Page 552 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Specification Controlled with Limitations: BAPS 168-34 HEAT TREATMENT OF 6AI-6V-2SN TITANIUM ALLOY Limitation: LIMITED TO ANNEALING ONLY PACIFIC PISTON RING, 0000106339 3620 EASTHAM DR. CULVER CITY, CA US, 90232-2411 TEL: 310 836 3322 FAX: 310 836 3327 Class: A SUBCONTRACTORS PACIFIC PRECISION PRODUCTS, 0000101046 9671 IRVINE CENTER DR. IRVINE, CA US, 92618-4652 TEL: 949 727-3844 FAX: 949 727 3848 Class: Systems with Limitations: C MANUFACTURER 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval PP6R634J & EASA dual approval EASA.145.5917. PACIFIC SCIENTIFIC, 0000100385 11700 N.W. 102 ROAD, SUITE 6 MIAMI, FL US, 33178-1029 TEL: 305-477-4711-221 FAX: 305-477-9799 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval P94R580N & EASA dual approval EASA.145.5406. PACIFIC SCIENTIFIC, 0000100043 7073 W. WILLIS DR. CHANDLER, AZ US, 85226-5165 TEL: 520 796 1100 FAX: 520 796 2024 Class: B EQUIPMENT SUPPLIERS PACIFIC SCIENTIFIC AVIATION SERV., 0000106031 2156 W. NORTHWEST HWY. 314 DALLAS, TX US, 75220-4221 TEL: 214 574 4200 FAX: 214 574 4210 Class: E MAINTENANCE ORGANIZATION PACIFIC SCIENTIFIC HTL-MEGGITT, 0000101234 1785 VOYAGER STREET SIMI VALLEY, CA US, 93063 TEL: 305-477-4711-221 FAX: 305-805-1292 Class: B EQUIPMENT SUPPLIERS PACIFIC SCIENTIFIC OECO, Class: 0000102409 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Learjet P/N: 7632201001-003 only Systems with Limitations: Page 553 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 4607 S.E. INTERNATIONAL WAY MILWAUKIE, OR US, 97222 TEL: 971 233 7469 FAX: 999 999 9999 B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval EK7R622N & EASA dual approval EASA.145.5053. Limitation: FAA Repair Station approval EK7R622N & EASA dual approval EASA.145.5053. Limitation: Pacific Scientific does maintain a design facility in Goleta, CA PACMIN INC., 0000111069 2021 RAYMER AVE. FULLERTON, CA US, 92833-2664 TEL: 714 447 4478 FAX: 714 447 4465 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods PACO PLASTICS & ENGINEERING INC., 0000103264 8540 DICE ROAD SANTA FE SPRINGS, CA US, 90670-2510 TEL: 562-698-0916-15 FAX: 562 696 4971 Class: C MANUFACTURER PAISLEY PRODUCTS OF CANADA INC., 0000105975 40 UPTON ROAD TORONTO, ON CA, M1L 2B8 TEL: 514 344 0218 FAX: 514 344 0219 Class: D DISTRIBUTOR PALASON BILLIARDS INC., 0000110597 2363 43RD AVE. LACHINE, QC CA, H8T 2K1 TEL: 800 631 1068 FAX: 514 631 4891 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods PALL AEROPOWER CORP., 0000100394 10540 RIDGE ROAD NEW PORT RICHEY, FL US, 34654-5198 TEL: (727) 844-2334 FAX: 727 815 3115 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval OK4R417M & EASA dual approval EASA.145.4103. PAN PACIFIC ELECTRONICS INC., 17985 65TH ST. N. E. Class: C MANUFACTURER 0000104990 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 554 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification REDMOND, WA US, 98052-4964 TEL: 425 881 7252 FAX: 425 881 9508 D DISTRIBUTOR PANASONIC AVIONICS CORP., 0000125779 3301 & 3303 MONTE VILLA PARKWAY BOTHELL, WA US, 98021-7814 TEL: 425 415 9000 FAX: 425 485 6175 Class: B EQUIPMENT SUPPLIERS PANASONIC AVIONICS CORP., 0000125778 26200 ENTERPRISE WAY LAKE FOREST, CA US, 92630-8400 TEL: 949-672-2000 FAX: 949-462-7100 Class: B EQUIPMENT SUPPLIERS PANASONICS AVIONICS CORP., 0000103017 2-15 MATSUBA-CHO KADOMA CITY, 27 JP, 5718503 TEL: 6 6906 3603 FAX: 514-999-9999 Class: B EQUIPMENT SUPPLIERS PANDUIT CORP., 0000102792 18900 PANDUIT DR. TINLEY PARK, IL US, 60487 TEL: 800 777 3300 FAX: 708 532 1811 Class: C MANUFACTURER PAOLO ASTORI, 0000122341 VIA MIRABELLA 9 GATTICO, NO IT, 28013 TEL: 0322 83 88 47 FAX: 0322 88 01 98 Class: C MANUFACTURER PAPIERS PEINTS & TISSUS CRESCENDO I, 4271 STE-CATHERINE W. WESTMOUNT, QC CA, H3Z 1P7 TEL: 514 933 0067 FAX: 514 989 2944 PAR GROUP LTD., 0000125828 0000110598 Learjet Approved Suppliers Scope of Approval Limitation: Class (C) Manufacturer is limited to ITT Cannon Connectors ONLY Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods (fabrics) Class: Systems with Limitations: Page 555 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval UNIT 5, JUNCTION 19 INDUSTRIAL PARK, GRE HEYWOOD, GM GB, OL10 1NB TEL: 1706 363790 FAX: 1706 364187 A SUBCONTRACTORS D DISTRIBUTOR 0000 GENERAL LIMITATION / REMARKS PARADIGM PRECISION BURNLEY, 0000115738 BENTLEY WOODWAY, HAPTON BURNLEY, LA GB, BB11 5TG TEL: 1282 478753 FAX: 1282 478843 Class: A SUBCONTRACTORS Specification Controlled: BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 168-30 HEAT TREATMENT OF CORROSION RESISTANT STEELS BAPS 172-34 FUSION WELDING BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL PARAGON NDT & FINISHES INC., 0000101150 1015 S. WEST ST. WICHITA, KS US, 67213-1627 TEL: 316 945 5285 FAX: 316 945 8906 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-5A CORROSION TESTING BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-17 RADIOGRAPHIC INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY LES 1004 PENETRANT INSPECTION LES 1009 INSPECTION, RADIOGRAPHIC LES 1045 ANODIZING, CHROMIC ACID LES 1047 CHEMICAL FILM TREATMENT, APPLICATION OF - ALUMINUM ALLOYS LES 1079 EPOXY FINISH, FUEL RESISTANT, APPLICATION OF Page 556 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval LES 1210 SONIC, INSPECTION LES 1218 INSPECTION, RADIOGRAPHIC - CASTINGS PPS 20.03 PENETRANT FLAW DETECTION PPS 32.01 CROMATE CONVERSION COATING PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) PPS 34.08 EPOXY PRIME PSPEC 300 PENETRANT FLAW DETECTION Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to surface preparation only. BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: to type II application only PARAMOUNT PANELS INC., 0000102005 1531 CEDAR ST. E. ONTARIO, CA US, 91761-5762 TEL: 909 947 8008-225 FAX: 909 947 8012 Class: B EQUIPMENT SUPPLIERS PARASOL AVIATION, 0000106492 10444 MCVINE AVE. SUNLAND, CA US, 91040-3102 TEL: 818 352 3322 FAX: 818 352 3085 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to the hinges and hinge components manufacturing. PARCO INC., 0000107271 1801 S. ARCHIBALD AVE. ONTARIO, CA US, 91761-7677 TEL: 909 947 2200 FAX: 909 947 9958 Class: C MANUFACTURER PARK AEROSPACE TECHNOLOGIES CORP., 0000127047 486 N. OLIVER ROAD, BLDG. Z NEWTON, KS US, 67114 TEL: 316 283 6500 FAX: 316 283 3639 Class: C MANUFACTURER PARKER HANNIFIN AIRCRAFT, 1160 CENTER ROAD Class: B EQUIPMENT SUPPLIERS 0000107803 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 557 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval AVON, OH US, 44011-1208 TEL: 440-937-1221 FAX: 866-260-0331 E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval QPWR872L & EASA dual approval EASA.145.4730. PARKER HANNIFIN CORP., 0000104608 77 DRAGON CT. WOBURN, MA US, 01888 TEL: 781 939 4339 FAX: 866 743 3159 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS PARKER HANNIFIN CORP., 0000103635 7664 PANASONIC WAY SAN DIEGO, CA US, 92154-8206 TEL: 619-205-1765 FAX: 619 205-1773-5235 Class: C MANUFACTURER PARKER HANNIFIN CORP., 0000100117 1005 A CLEANER WAY HUNTSVILLE, AL US, 35805-6708 TEL: 256 881 2040 FAX: 256 881 5072 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER PARKER HANNIFIN CORP., 0000126163 4700 LONE STAR BLVD. FORT WORTH, TX US, 76106-2105 TEL: 330 296 2871 FAX: 330 296 8433 Class: C MANUFACTURER PARKER HANNIFIN CORP., 0000106902 2575 W. 5TH ST. JACKSONVILLE, FL US, 32254-2066 TEL: 904 475 3626 FAX: 904 384 5333 Class: B EQUIPMENT SUPPLIERS PARKER HANNIFIN CORP., 0000100951 14300 ALTON PKWY. IRVINE, CA US, 92618-1814 TEL: 949 809 8140 FAX: 949 809 8673 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS C MANUFACTURER Limitation: SEE EMCM #326 E MAINTENANCE ORGANIZATION PARKER HANNIFIN CORP., Class: 0000103291 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SOCD APPROVAL LIMITED TO P/N 600-10910-1 & -3SCD/VID APPROVAL LIMITED TO P/N 600-10911-1 Page 558 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 2220 S. 3600 W. SALT LAKE CITY, UT US, 84130-0505 TEL: 801 972 3000 FAX: 999 999 9999 B EQUIPMENT SUPPLIERS PARKER HANNIFIN CORP., 0000126997 300 PARKER DR. OTSEGO, MI US, 49078-1431 TEL: 269 694 9411 FAX: 269 694 4614 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER PARKER HANNIFIN CORP., 0000107117 403 INDUSTRIAL DR. NACOGDOCHES, TX US, 75964-1297 TEL: 800 233 3900-... FAX: 936 560 8998 Class: A SUBCONTRACTORS C MANUFACTURER PARKER HANNIFIN CORP., 0000110988 3800 CALLE TECATE CAMARILLO, CA US, 93012-5070 TEL: 817 210 1536 FAX: 805-484-8533 Class: B EQUIPMENT SUPPLIERS G INDIRECT PRODUCT PARKER HANNIFIN CORP., 0000124764 SIETE NORTE Y UNO PONIENTE 111 TIJUANA, BC MX, 22500 TEL: 619 671 3329 FAX: 619 661 3241 Class: C MANUFACTURER PARKER HANNIFIN CORP., 0000100148 2220 PALMER AVE. KALAMAZOO, MI US, 49001-4122 TEL: 269 384 3459 FAX: 949 809 8667 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval UCER345K & EASA dual approval EASA.145.4728. PARKER HANNIFIN CORP., 0000104817 135 BRYANT AVE. CRANFORD, NJ US, 07016-3212 TEL: 781 939 4339 FAX: 908 272 2741 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 559 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification PARKER HANNIFIN CORP., 0000102733 2360 PALUMBO DR. LEXINGTON, KY US, 40509-1048 TEL: 859 606 269 2351 FAX: 859 268 3816 Class: C MANUFACTURER PARKER HANNIFIN CORP., 0000100252 1425 W. 2675 N. OGDEN, UT US, 84404-2665 TEL: 801 786 3235 FAX: 801 786 7332 Class: B EQUIPMENT SUPPLIERS PARKER HANNIFIN CORP., 0000100251 300 MARCUS BLVD. HAUPPAUGE, NY US, 11787-9400 TEL: 631 639 2101 FAX: 631 434 8134 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER E MAINTENANCE ORGANIZATION PARKER HANNIFIN CORP., 0000116307 8 COMMONWEALTH AVE. WOBURN, MA US, 01801 TEL: 781 939 4339 FAX: 866 743 3157 Class: C MANUFACTURER PARKER HANNIFIN CORP., 0000100053 220 ROBERTS CUT-OFF ROAD FORT WORTH, TX US, 76114-3605 TEL: 949-809-8133 FAX: 817 738 7562 Class: C MANUFACTURER PARKER HANNIFIN CORP. / FSC DIV., 0000126875 838 OVERHOLT ROAD KENT, OH US, 44240-7530 TEL: (330) 673-2700 FAX: (330) 673-0922 Class: C MANUFACTURER PARKER HANNIFIN CORP. DIV., 4635 DURHAM ROAD S. GRIMSBY, ON CA, L3M 4H8 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER 0000103777 Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval FX1R156K & EASA dual approval EASA.145.4732 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 420 Page 560 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 905 945 2274 FAX: 9999999999 PARKER HANNIFIN CORPORATION, 0000131929 BLVD. MILENIUM 209 APODACA, NL MX, 66600 TEL: 528112530879 FAX: 528112530879 Class: C MANUFACTURER PARKER HANNIFIN FLUID SYSTEMS, 0000100149 16666 VON KARMAN AVE. IRVINE, CA US, 92606-4917 TEL: 949 809 8097 FAX: 949-851-3308 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval AU43063M & EASA dual approval EASA.145.5375. PARKER HANNIFIN FLUID SYSTEMS, 0000100855 3580 SHAW BLVD. NAPLES, FL US, 34117-8408 TEL: 5096238511 FAX: 949 809 8667 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval FI1R140K & EASA dual approval EASA.145.4865. PARKER HANNIFIN FLUID SYSTEMS, 0000101217 520 TERNES AVE. ELYRIA, OH US, 44035-6252 TEL: 440 366 5200 FAX: 440 366 5253 Class: B EQUIPMENT SUPPLIERS PARKER HANNIFIN FLUID SYSTEMS, 0000109212 711 TAYLOR ST. ELYRIA, OH US, 44035-6229 TEL: 440 284 6310 FAX: 440 284 6208 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER E MAINTENANCE ORGANIZATION PARKER HANNIFIN GMBH, 0000136629 ARNOLD JAGER STR 1 BIETIGHEIM - BISSINGEN, 08 DE, 74321 TEL: 49 7142 351 452 FAX: 514 855 5000 Class: D DISTRIBUTOR PARKER HANNIFIN GMBH, LORENZ-SCHOTT-STR. 9 MAINZ-KASTEL, 06 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval P2KY734J & EASA dual 0000123649 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval HO5R916M & EASA dual approval EASA.145.4729. Page 561 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification DE, 55252 TEL: 61 34 2 04 0 FAX: 61 34 2 04 188 Scope of Approval approval EASA.145.0316. PARKER HANNIFIN SERVO CONTROL, 0000100983 2010 WALRDREP INDUSTRIAL BLVD. DUBLIN, GA US, 31021 TEL: 478-275-4030 FAX: 478 277 9216 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Certiciate Number A7XR608J. EASA Certificate Number EASA.145.5099. PARKER HANNIFIN-INSTRUMENTATION PRO, 2651 ALABAMA HIGHWAY 21, NORTH JACKSONVILLE,ALABAMA, AL US, 36265 TEL: 256-881-2040 FAX: 256-881-5072 0000137730 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER PARKER HANNIFIN-TUBE FITTINGS DIVIS, 3885 GATEWAY BLVD. COLUMBUS, OH US, 43228 TEL: 614-279-7070 FAX: 614-279-7685 0000137727 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER PARKER QUICK COUPLING DIVISION, 0000110704 201 TITUSVILLE ROAD UNION CITY, PA US, 16438-8699 TEL: 814 438 4032 FAX: 763 544 3448 Class: C MANUFACTURER PARKER SEALS, 0000108830 DIAGONAL LORENZO DE LA GARZA #13 MATAMOROS, TMS MX, 99999 TEL: 859 335 3000 FAX: 859 335 3005 Class: C MANUFACTURER PARKER-HANNIFIN CORP., 0000127763 8790 W. TAMARACK ROAD LAKEVIEW, MI US, 48850 TEL: 989 352 7264 FAX: 989 352 8125 Class: C MANUFACTURER PASTERNACK ENTERPRISES INC., 17802 FITCH Class: H COMMERCIAL OFF THE SHELF 0000134341 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 562 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval IRVINE, CA US, 92623 TEL: 949 261 1920 FAX: 949 261 7451 PATENAUDE INDUSTRIES INC., 0000107275 2260 MICHELIN LAVAL, QC CA, H7L 5C3 TEL: 450 686 8811 FAX: 450 686 8923 Class: A SUBCONTRACTORS Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 Specification Controlled with Limitations: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: INSTALLATION OF COTTER PIN ONLY BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: MANUAL INSTALLATION ONLY PATLON AIRCRAFT & INDUSTRIES, 0000103797 8130 FIFTH LINE HALTON HILLS, ON CA, L7G 0B8 TEL: 905 864 8706 FAX: 905 864 8728 Class: D DISTRIBUTOR PATRIOT FORGE INC., 0000121381 100 CONSOLIDATED DR. PARIS, ON CA, N3L 3T6 TEL: 519 720 1048 FAX: 519 756 2041 Class: A SUBCONTRACTORS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM code 1021 PATRIOT FORGE INC., 0000120343 280 HENRY ST. BRANTFORD, ON CA, N3T 5S7 TEL: 519 758 8100 FAX: 519 758 9961 Class: A SUBCONTRACTORS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM code 1020 PATRIOT SPECIAL METALS INC., 2201 HARRISON AVE. S.W. CANTON, OH US, 44706-3076 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM 0000108760 Page 563 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 330 580 9600 FAX: 330 456 3732 PATS AIRCRAFT LLC., 0000101579 21652 NANTICOKE AVE. GEORGETOWN, DE US, 19947-6308 TEL: 302-253-6210 FAX: 302-253-6213 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval P7UR116O & EASA dual approval EASA.145.5124. PATTONAIR LTD., 0000108044 KINGSWAY BUSINESS PARK, UNIT 5 OCTIMUM, WOKING, SY GB, GU21 5SF TEL: 1483 774 600 FAX: 1483 763 989 Class: D DISTRIBUTOR PATTONAIR USA INC., 0000100613 1900 ROBOTICS PLACE FORT WORTH, TX US, 76118-7128 TEL: 817 284 4449 FAX: 817 595 1554 Class: C MANUFACTURER D DISTRIBUTOR PAUL FABRICATIONS LTD., 0000133431 10 SILLS ROAD, WILLOW FARM BUSNESS, CAST DERBY, DB GB, DE74 2US TEL: +44 (0) 13328... FAX: 514 855 5000 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-15 STRESS RELIEF OF METALS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limitation: Limited to Intrusive Electrolytic Titanium only BAPS 188-05 LASER CUTTING OF METALS Limitation: Limitation: Limited to Titanium Class 1 & Class 2 PB FASTENERS, 0000107276 1700 W. 132TH ST. GARDENA, CA US, 90249-2008 TEL: 310 323 6222 FAX: 310 329 6249 Class: C MANUFACTURER Page 564 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification PCA AEROSTRUCTURES, 0000106719 7100 BELGRAVE AVE. GARDEN GROVE, CA US, 92841 TEL: 310 639 9322 FAX: 310 608 5915 Class: A SUBCONTRACTORS PCC AEROSTRUCTURES DORVAL INC., 0000109219 123 AVRO DORVAL, QC CA, H9P 2Y9 TEL: 514-421-7782 FAX: 514 421 0377 Class: A SUBCONTRACTORS Learjet Approved Suppliers Scope of Approval Systems with Limitations: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Limited to touch up only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Limited to touch up only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING Limitation: Limited to touch up only BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type II only BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Limitation: Limited to anvil swaging BAPS 188-02 COLD WORKING OF HOLES Limitation: Limited to type 1 only PPS 21.03 PRIMING (F21) AND SEALING OF INTEGRAL FUEL TANKS Limitation: F21 touch-up only Page 565 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PPS 34.08 EPOXY PRIME Limitation: Limited to touch up only PCC AEROSTRUCTURES MEXICO S.A. DE C, CARRETERA ESTATAL 200 QUERETARO COLON, QRO MX, 76278 TEL: 442 713 5600 FAX: 442 713 5601 0000130198 Class: A SUBCONTRACTORS Specification Controlled: BAPS 188-02 COLD WORKING OF HOLES PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN PPS 20.07 CONDUCTIVITY TESTING Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to Manual Installation Only. BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Limited to: Bearing and bushing Wet installation BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Limitation: Limited to: Installation and Retention of Self Aligning Groove Bearings by Roller Swaging, torque Limitation: adjustment method 2. BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limited to Liquid Nitrogen Method Only. PPS 20.08 HARDNESS TESTING Limitation: Hardness Testing of metals. Limited to Rockwell Hardness Testers. PPS 34.08 EPOXY PRIME Limitation: Limited to Touch-Up Only PCC STRUCTURALS - ALUMINUM, 0000109278 24 GRANITE ST. TILTON, NH US, 03276-1632 TEL: 603 286 4301 FAX: 603 934 4455 Class: C MANUFACTURER PCC STRUCTURALS - CARSON CITY, 0000108486 2727 LOCKHEED WAY CARSON CITY, NV US, 89706-0718 TEL: 775 883 3800-226 FAX: 775 883 0999 Class: A SUBCONTRACTORS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Specification Controlled: PSPEC 300 PENETRANT FLAW DETECTION PSPEC 305 RADIOGRAPHIC EXAMINATION Page 566 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval PCC STRUCTURALS - GROTON, 0000105982 839 POQUONNOCK ROAD GROTON, CT US, 06340-4537 TEL: 860 445 7421 FAX: 860 449 8052 Class: A SUBCONTRACTORS C MANUFACTURER Specification Controlled: LES 1004 PENETRANT INSPECTION LES 1006 INSPECTION, MAGNETIC PARTICLE LES 1009 INSPECTION, RADIOGRAPHIC LES 1177 WELDING, REPAIR - PREMIUM ALUMINUM CASTINGS LES 1183 WELDING, REPARI - COROSION RESISTANT STEEL CASTINGS LES 1218 INSPECTION, RADIOGRAPHIC - CASTINGS PCC STRUCTURALS - SAN LEANDRO, 0000118052 414 HESTER ST. SAN LEANDRO, CA US, 94577-1099 TEL: 510 568 6400 FAX: 510 632 0949 Class: C MANUFACTURER PCX AEROSTRUCTURES, LLC, 0000131981 70 RAYNOR AVENUE RONKONKOMA, NY US, 11179 TEL: 631 445 5439 FAX: 631 694 1849 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS PCX AEROSTRUCTURES, LLC, 0000134079 60 MILBAR BLVD. FARMINGDALE, NY US, 11735 TEL: 631 249 7901 FAX: 631 694 1849 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Specification Controlled with Limitations: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: to the wet installation and fillet sealing of bushings using injection kits. PEERLESS AEROSPACE FASTENER, 0000101903 141 EXECUTIVE BLVD PO BOX 710 FARMINGDALE, NY US, 11735-4719 TEL: 631 962 2260 FAX: 631 962 2255 Class: D DISTRIBUTOR PEERLESS ELECTRONICS INC., Class: 0000116532 Page 567 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 700 HICKSVILLE ROAD, GATE 3 BETHPAGE, NY US, 11714 TEL: 516 594 3502 FAX: 516 593 2179 D DISTRIBUTOR PEI-GENESIS INC., 0000107879 4747 W. CLEVELAND ROAD SOUTH BEND, IN US, 46628-9739 TEL: 905 448 9562- FAX: 905-448-9569 Class: C MANUFACTURER D DISTRIBUTOR PENN ENGINEERING, 0000107280 5190 OLD EASTON ROAD DANBORO, PA US, 18916 TEL: 215 766 8853 FAX: 215 766 3633 Class: C MANUFACTURER PENN FIBRE CO., 0000108398 CHURCH ST& SNYDER ST GREENWOOD, DE US, 19950 TEL: 302-349-4505 FAX: 302-349-5772 Class: C MANUFACTURER PENNY & GILES AEROSPACE LTD., 0000110057 1 AIRFIELD ROAD CHRISTCHURCH, DO GB, BH23 3TQ TEL: 01202 409409 FAX: 01202 409410 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION PERFEKTA INC., 0000101440 480 E. 21ST ST. N. WICHITA, KS US, 67214-1234 TEL: 316 491 8094 FAX: 316 263 0468 Class: A SUBCONTRACTORS PERMABOND LLC, 0000117740 223 CHURCHILL AVE. SOMERSET, NJ US, 08873 TEL: 800 714 0170 FAX: 800 334 3219 Class: C MANUFACTURER Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Page 568 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification PERMASWAGE S.A., 0000104422 Z. I. DES DAMES LES CLAYES SOUS BOIS, 78 FR, 78340 TEL: 1 30 79 17 20 FAX: 1 34 81 02 21 Class: B EQUIPMENT SUPPLIERS PETROLIERE IMPERIALE, 0000109047 7100 JEAN-TALON E. ANJOU, QC CA, H1M 3R8 TEL: 506-867-6319 FAX: 262-313-1878 Class: D DISTRIBUTOR PEXA LTD., 0000122857 SPRINGWOOD BUSINESS PARK HOLYWELL GREEN, YW GB, HX4 9BJ TEL: 01422 314400 FAX: 01422 314401 Class: D DISTRIBUTOR E MAINTENANCE ORGANIZATION PEXCO AEROSPACE INC., 0000105919 2405 S.O. 3RD AVE. UNION GAP, WA US, 98903-1510 TEL: 509 853 2846 FAX: 509 248 4750 Class: C MANUFACTURER PFW AEROSPACE AG, 0000117996 AM NEUEN RHEINHAFEN 10 SPEYER, 08 DE, 67346 TEL: 6232 616 4398 FAX: 49 6232 66 4398 Class: A SUBCONTRACTORS PHILIPS COMSUMER ELECTRONICS, 0000108772 1015 SNAPPS FERRY ROAD GREENEVILLE, TN US, 37745-4028 TEL: 423 636 5723 FAX: 423 636 5687 Class: C MANUFACTURER Learjet Approved Suppliers Scope of Approval Specification Controlled: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 172-34 FUSION WELDING BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 174-08 ASSEMBLY AND INSTALLATION OF FLARELESS FITTINGS ON PLUMBING LINES BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING Page 569 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PHOENIX AEROSPACE INC., 0000100965 220 80TH TERRACE W. KANSAS CITY, MO US, 64114-2321 TEL: 800-437-6556 FAX: 816-444-4133 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval SL2R165L & EASA dual approval EASA.145.4746. PHOENIX CNC ENGINEERING LTD, 0000131508 ACTON ROAD, LONG EATON NOTTINGHAM, NT GB, NG10 1FU TEL: 01159469896 FAX: 01159469896 Class: A SUBCONTRACTORS PHS/MWA AVIATION SERVICES, 0000106200 42355 RIO NEDO TEMECULA, CA US, 92590 TEL: 909-695-1008 FAX: 951-695-1006 Class: E MAINTENANCE ORGANIZATION PIC WIRE & CABLE, 0000101338 N53 W24747 S. CORPORATE CIR. SUSSEX, WI US, 53089-4376 TEL: 262 372 5030 FAX: 262 246 0450 Class: C MANUFACTURER PIECES D'AUTOS CARQUEST, 0000109082 540 SAUVE ST-EUSTACHE, QC CA, J7R 5A9 TEL: 450 473 6800 FAX: 450-473-9837 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS PILGRIM SCREW CORP., 0000110646 2875 FRYE ROAD W. CHANDLER, AZ US, 85224-4902 TEL: 480 917 2500 FAX: 480 917 9979 Class: C MANUFACTURER PILGRIM SCREW CORP., 120 SPRAGUE ST. PROVIDENCE, RI US, 02907-2753 Class: C MANUFACTURER 0000106249 Page 570 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 401-274-4090-333 FAX: 401-861-9890 PINTAHER, 0000130899 POLIGONO INDUSTRIAL ILLESCAS, 45 ES, 45200 TEL: 34 925 532 462 FAX: 34 925 532 462 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING PIONEER PLASTICS CORPORATION, 0000130556 325 DESOTO AVE. MORRISTOWN, TN US, 37814 TEL: 800 766 1842 FAX: 999 999 9999 Class: C MANUFACTURER PIVOT POINT, 0000123284 761 INDUSTRIAL LANE HUSTISFORD, WI US, 53034-0488 TEL: 800-222-2231 FAX: 920-349-3253 Class: C MANUFACTURER PL PORTER CONTROLS INC., 0000100878 3000 WINONA AVE. BURBANK, CA US, 91504-2540 TEL: 818 526 2231 FAX: 818 526 2663 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval QD3R785L & EASA dual approval EASA.145.4560. PLACETECO INC., 0000104388 3763 BURRILL SHAWINIGAN, QC CA, G9N 0C4 TEL: 819 539 8808-224 FAX: 819 539 9224 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS G INDIRECT PRODUCT Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Specification Controlled with Limitations: BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS Limitation: UNTIL ALL PERSONNEL QUALIFIED AND THERMAL PROFILES PERFORMED ON TOOLS PPS 10.08 FORMING THERMOPLASTIC SHEET Limitation: Limitation to drape forming only. Page 571 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PLASCORE INC., 0000107292 615 N. FAIRVIEW ZEELAND, MI US, 49464-9421 TEL: 616 748 2216 FAX: 616 772 5508 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER Specification Controlled: BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4C TESTING OF THERMAL PROPERTIES (EXPANSIONS, TMA, ETC.) BAPS 260-010 MACHINING, FORMING AND PREPARATION OF NON-METALLIC HONEYCOMB CORE FOR LAY-UP IN SANDWICH COMPONENTS PLASMA PROCESSES, LLC, 0000131669 4914 MOORES HILL ROAD HUNTSVILLE, AL US, 35811 TEL: 256 851 7653 FAX: 256 851 7653 Class: A SUBCONTRACTORS Specification Controlled with Limitations: BAPS 194-03 APPLICATION OF THERMAL SPRAY COATINGS Limitation: Limited to Type 1for part numbers C016375561-001-TC, C016375561-002-TC, C01637560Limitation: 001-TC & C01637560-002-TC. PLASMA TECHNOLOGY INC., 0000131661 1754 CRENSHAW BLVD. TORRANCE, CA US, 90501 TEL: 310 320 3373 FAX: 310 320 3373 Class: A SUBCONTRACTORS Specification Controlled: BAPS 194-03 APPLICATION OF THERMAL SPRAY COATINGS PLASTIC FABRICATING CO. INC., 0000101128 1650 S. MC COMAS WICHITA, KS US, 67213-1239 TEL: 316-942-1241 FAX: 316 942 0687 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM PLASTIC PRODUCTS LTD., 0000117741 UNIT 6 WHYTELEAFE BUSINESS VILLAGE, GODS WHYTELEAFE, SY GB, CR3 0AT TEL: 01 883 621814 FAX: 02086 498803 Class: D DISTRIBUTOR PLASTICOR INC., 1170 50EME AVE. LACHINE, QC CA, H8T 2V3 Class: B EQUIPMENT SUPPLIERS 0000107293 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 572 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 514 636 9630-203 FAX: 514 636 6867 PLASTIQUES FLEXIBULB INC., 0000107294 9000 PARENT TROIS-RIVIERES, QC CA, G9A 5E1 TEL: 819 374 9250-34 FAX: 819 374 5143 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS C MANUFACTURER D DISTRIBUTOR PLATINUM PRECISION ENGINEERING LTD, 15 CORRIGS ROAD NEWCASTLE, DN GB, BT33 0JZ TEL: 514-855-5000 FAX: 514 855 5000 Class: A SUBCONTRACTORS 0000135948 Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING PLYMOUTH TUBE CO., 0000108512 201 COMMERCE CT. HOPKINSVILLE, KY US, 42240-6806 TEL: 270 886 6631 FAX: 270 885 7034 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM PLYMOUTH TUBE CO., 0000108814 1209 E. 12TH ST. STREATOR, IL US, 61364-3967 TEL: 815-673-1515- FAX: 815 672 7343 Class: C MANUFACTURER PLYMOUTH TUBE CO., 0000118953 2000 INDUSTRIEL PKWY. SALISBURY, MD US, 21801-8504 TEL: 410 749 1666 FAX: 410 749 2263 Class: C MANUFACTURER PLYMOUTH TUBE CO., 0000107477 2056 YOUNG ST. EAST TROY, WI US, 53120-1391 TEL: 262 642 7321 FAX: 262 642 9571 Class: C MANUFACTURER PNEUDRAULICS INC., 0000100991 8575 HELMS AVE. RANCHO CUCAMONGA, CA Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval PD6R469J & EASA dual Page 573 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification US, 91730-4591 TEL: 909 980 5366 FAX: 909 945 2821 Scope of Approval approval EASA.145.4753. PNEUTECH-ROUSSEAU GROUP, 0000133599 1475 32IEME AVENUE LACHINE, QC CA, H8T 3J1 TEL: 514 635 7100 FAX: 514 635 7010 Class: D DISTRIBUTOR PNZ - PRODUKTE GMBH, 0000134759 ELCHSTATTER STREET 2-4A KIPFENBERG, 09 DE, 85110 TEL: 49 0 8465 17380 FAX: 49 0 8465 3616 Class: C MANUFACTURER POINTER AVIONICS LIMITED, 0000104706 500 DOTZERT COURT WATERLOO, ON CA, N2L 6A7 TEL: 519 648 3778 FAX: 519 648 3075 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Tranport Canada AMO 11-85 POINTER INC., 0000107651 1027 N. STADEM DR. TEMPE, AZ US, 85281 TEL: 480 966 1674 FAX: 480 968 8020 Class: B EQUIPMENT SUPPLIERS POK S.A., 0000108535 Z.I. LES GUIGNONS NOGENT-SUR-SEINE, 10 FR, 10400 TEL: 3253 98478 FAX: 3253 98490 Class: C MANUFACTURER POLAMCO LTD., 0000107296 WESTON LOCK LOWER BRISTOL ROAD BATH, BS GB, BA2 1EP TEL: 1125 322500 FAX: 1225 425940 Class: C MANUFACTURER POLE AIR AVIATION INC., 2290 46TH AVE. Class: D DISTRIBUTOR 0000104489 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 574 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval LACHINE, QC CA, H8T 2P3 TEL: 514 636 8154-230 FAX: 514 636 0763 E MAINTENANCE ORGANIZATION Limitation: Canadian AMO approval 48-89 & EASA dual approval EASA.145.7074. POLYNT COMPOSITES CANADA INC., 0000128291 2650 RUE THERESE CASGRAIN DRUMMONDVILLE, QC CA, J2A 4J5 TEL: 819 477 2165 FAX: 819 474 5000 Class: D DISTRIBUTOR POLYONE, 0000108363 70 CARLISLE PLACE STAMFORD, CT US, 06902-7630 TEL: 800 243 9002 FAX: 203 348 7989 Class: C MANUFACTURER POLYSTONE CREATIONS INC., 0000110600 226 PRATTEN DR. CLEVELAND, GA US, 30528-3693 TEL: 706 348 1366 FAX: 706 348 1367 Class: A SUBCONTRACTORS PONCA PRODUCTS INC., 0000100864 2204 MEAD ST. S. WICHITA, KS US, 67211-5020 TEL: 316 262 4051 FAX: 316 262 4614 Class: B EQUIPMENT SUPPLIERS PORCHER INDUSTRIES COMPOSITES, 0000108963 Z. I. MAS DES CHAUMES LE GRAND LEMPS, 38 FR, 38690 TEL: 0476 065560 FAX: 0476 065569 Class: C MANUFACTURER PORT PLASTICS INC., 0000102083 3191 N. WASHINGTON ST., SUITE 7 CHANDLER, AZ US, 85225-1162 TEL: 626-768-2967 FAX: 480 813 6183 Class: D DISTRIBUTOR PORTER AIRLINES INC., Class: 0000125982 Page 575 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification TORONTO CITY CENTRE AIRPORT TORONTO, ON CA, M5V 1A1 TEL: 416 619 8576 FAX: 416 203 9198 K BUYER FURNISHED EQUIP - BFE POSITRONIC INDUSTRIES CARIBE INC., 0000137433 101 ROAD #591 EL TUQUE INDUSTRIAL PARK PONCE, PR PR, 00728-2803 TEL: 001-787-841-0920 FAX: 001-787-841-5 Class: C MANUFACTURER POSITRONIC INDUSTRIES INC., 0000101065 423 N. CAMPBELL AVE. SPRINGFIELD, MO US, 65806-1007 TEL: (800) 641-405... FAX: 417 866 4115 Class: C MANUFACTURER POSITRONIC INDUSTRIES S.A., 0000110162 46 ROUTE D'ENGACHIES ZONE IND. E. AUCH, 32 FR, 32020 TEL: 5 62 63 44 91 FAX: 5 62 63 51 17 Class: C MANUFACTURER POWELL ELECTRONICS EUROPE BV, 0000135962 KUIFMESS 58 RG NIEUWEGEIN, 10 NL, 3435 NL TEL: 31 30 6014666 FAX: 31 30 6014667 Class: D DISTRIBUTOR POWELL ELECTRONICS INC., 0000105222 200 COMMODORE DR. LOGAN TOWNSHIP, NJ US, 08085-1270 TEL: 508 481 7575 FAX: 508 481 7779 Class: C MANUFACTURER D DISTRIBUTOR POWELL ELECTRONICS INC., 0000107939 1933 WESTRIDGE DR. IRVING, TX US, 75038-2902 TEL: 972 719 5404 FAX: 972 719 5405 Class: D DISTRIBUTOR Learjet Approved Suppliers Scope of Approval Page 576 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval POWER-DYNE, 0000102064 2055 MAIN S. MIDDLETOWN, CT US, 06457-6151 TEL: 860-346-9283 FAX: 860 343 6642 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS PPG AEROSPACE, 0000134743 HEIN-SASS-WEG 29 FINKENWERDER, 02 DE, 21129 TEL: 49 40 7421 93 0 FAX: 49 40 7421 395 Class: C MANUFACTURER PPG AEROSPACE MATERIALS (TIANJIN) C, 0000131031 TIANJIN AIRPORT ECONOMIC AREA TIANJIN, 030 CN, 300308 TEL: 862 224 828618 FAX: 862 224 828600 Class: C MANUFACTURER D DISTRIBUTOR PPG AMPASPACE S.R.L., 0000108139 VIA DELLE TRE VENEZIE 10 CASALETTO VAPRIO, CR IT, 26010 TEL: 390 373 272 1... FAX: 037 327 2116 Class: C MANUFACTURER PPG CANADA INC., 0000104032 5676 TIMBERLEA BLVD. MISSISSAUGA, ON CA, L4W 4M6 TEL: 905-629-5652 FAX: 905 629 7009 Class: C MANUFACTURER D DISTRIBUTOR PPG INDUSTRIES INC., 0000121659 11605 VIMY RIDGE ROAD LITTLE ROCK, AR US, 72219-2610 TEL: 800 283 6627 FAX: 501 455 3061 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS PPG INDUSTRIES INC., 1719 HWY. 72 E. HUNTSVILLE, AL US, 35811-9660 Class: B EQUIPMENT SUPPLIERS 0000100596 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: BAERD-GEN-030 GENERAL REQUIREMENT FOR RE-PACKAGING OF PAINTS INTO SIDE BY SIDE TOUCH-UP KITS Page 577 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 256 426 2715 FAX: 256 851 8822 PPG JAPAN LTD., 0000118126 1123-1 KOMOCHIMATSU KUROZASA-CHO MIYOSHI-SHI, 23 JP, 4700201 TEL: 561-35-5200 FAX: 561-35-5201 Class: D DISTRIBUTOR PPI ADHESIVE PRODUCTS LTD., 0000117983 WATERFORD INDUSTRIAL ESTATE WATERFORD, WF IE, 0 TEL: 00 353 51 373... FAX: 00 353 51 377 Class: C MANUFACTURER PRATT & WHITNEY, 0000136441 17900 BEELINE HIGHWAY JUPITER, FL US, 33478 TEL: 561 796 2000 FAX: 999 999 9999 Class: B EQUIPMENT SUPPLIERS PRATT & WHITNEY CANADA (S.E.A.) PTE, 10 LOYANG CRES. LOYANG INDUSTRIAL ESTATE, SG SG, 509010 TEL: 6545 5353 FAX: 6542 3625 0000125681 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Class: E MAINTENANCE ORGANIZATION PRATT & WHITNEY CANADA CORP., 0000101482 7007 DE LA SAVANE ST-HUBERT, QC CA, J3Y 3X7 TEL: 514 468 8765 FAX: 514 468 7819 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Canadian AMO approval 20-00 & EASA dual approval EASA.145.7098. PRATT & WHITNEY CANADA CORP., 0000100566 1000 MARIE-VICTORIN LONGUEUIL, QC CA, J4G 1A1 TEL: 231-799-6657 FAX: 231-799-8732 Class: B EQUIPMENT SUPPLIERS PRATT & WHITNEY CANADA INC., 1801 COURTNEY PARK DR. MISSISSAUGA, ON Class: B EQUIPMENT SUPPLIERS 0000100565 Page 578 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval CA, L5T 1J3 TEL: 450-647-2816 FAX: 905 564 4127 PRATT & WHITNEY COMPONENT SOLUTIONS, 7007 DE LA SAVANE ST-HUBERT, QC CA, J3Y 3X7 TEL: 450 442 6843 FAX: 450-647-9606 0000110746 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: In accordance with AMO 20-00 and EASA 145.7098 PRATT & WHITNEY ENGINE SERVICES INC, 1525 MIDWAY PARK ROAD BRIDGEPORT, WV US, 26330-9688 TEL: 304-842-1352 FAX: 304-842-1393 0000100567 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval LM1R301K & EASA dual approval EASA.145.4757. PRATT & WHITNEY ENGINE SERVICES INC, 4905 STARIHA DR. MUSKEGON, MI US, 49441-5559 TEL: 231-799-6689 FAX: 231-799-8732 0000106243 Class: D DISTRIBUTOR Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: For Aftermarket Distribution activities including Procurement, Storage and Delivery of New Limitation: and Serviceable Gas Turbine Engine, Airframe and Accessory Components. All refurbished Limitation: inventory have been repaired or overhauled by repair station approved byPWCS. PRATT & WHITNEY GDC, 0000130841 3781 SOUTHSIDE INDUSTRIAL COURT ATLANTA, GA US, 30354 TEL: 404 968 6086 FAX: 860 557 7023 Class: D DISTRIBUTOR PRAXAIR CANADA INC., 0000108494 3400, 2E RUE PARC INDUSTRIEL L. GERARD-L ST-HUBERT, QC CA, J3Y 8Y7 TEL: 450 676 0223 FAX: 450 445 7229 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM PRAXAIR SURFACE TECHNOLOGIES, 18502 LAUREL PARK ROAD S. COMPTON, CA US, 90220 Class: A SUBCONTRACTORS Specification Controlled: PSPEC 446 APPLICATION OF HEAT & CORROSION RESISTANT INORGANIC COATING 0000110087 Page 579 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 310 604 0018 FAX: 310 635 3569 PRAXAIR SURFACE TECHNOLOGIES, 0000137048 1366 TOLLAND TURNPIKE MANCHESTER, CT US, 06042 TEL: 860-646-0700 FAX: 999-999-9999 Class: A SUBCONTRACTORS PRAXAIR SURFACE TECHNOLOGIES INC., 0000136963 7615 FAIRVIEW STREET HOUSTON, TX US, 77041 TEL: 713 849 9474 FAX: 514 855 5000 Class: A SUBCONTRACTORS PRAXAIR SURFACE TECHNOLOGIES MONTRE, 0000106901 2300 COHEN ST-LAURENT, QC CA, H4R 2N8 TEL: 514 333 0030-... FAX: 514 333 6919 Class: A SUBCONTRACTORS Specification Controlled: PSPEC 446 APPLICATION OF HEAT & CORROSION RESISTANT INORGANIC COATING Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-4E TESTING OF WEAR AND ABRASION PROPERTIES BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-06 PHOSPHATE TREATMENT BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-23 HARD ANODIZING OF ALUMINUM ALLOYS Page 580 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 160-31 LOCALIZED BRUSHING PLATING BAPS 160-32 SULFURIC ACID ANODIZING BAPS 160-36 ELECTROLYTIC POLISHING BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 161-007 APPLICATION OF MIL-L-46010 SOLID FILM LUBRICANT BAPS 161-008 APPLICATION OF MIL-81329 SOLID FILM LUBRICANT BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 176-14 NITAL ETCH INSPECTION OF STEEL PARTS BAPS 180-001 ALKALINE CLEANING BAPS 180-11 CLEANING AND DEOXIDIZING COPPER AND COPPER ALLOYS BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY MPS 160-08 CADMIUM PLATING OF CARBON AND LOW ALLOY STEELS BELOW 220,000PSI, COPPER ALLOYS AND CRES STEELS MPS 160-11 CHEMICAL CONVERSION TREATMENTS FOR MAGNESIUM ALLOYS MPS 160-27 CADMIUM PLATING OF CARBON AND LOW ALLOY HEAT TREATED TO 220-240 KSI AND ABOVE MPS 250-023 PAINTING DETAIL PARTS AEROSPATIALE A330/A340 MPS 250-024 CHROMIC ACID ANODIZING AEROSPATIALE A330/A340 MPS 250-028 CADMIUM PLATING MPS 250-085 QUALIFICATION, ACCELERATED DRYING OF PAINTS MPS 250-301 PENETRANT INSPECTION MPS 250-302 MAGNETIC PARTICLE INSPECTION PPS 20.01 MAGNETIC PARTICLE INSPECTION PPS 20.03 PENETRANT FLAW DETECTION PPS 31.05 SURFACE TREATMENTS OF CORROSION RESISTANT STEELS Page 581 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PPS PPS PPS PPS PPS 32.01 32.03 32.04 33.01 34.08 CROMATE CONVERSION COATING CHROMIC ACID ANODIZING (A1) HARD ANODIZING (A2) CADMIUM PLATING (E1) EPOXY PRIME Specification Controlled with Limitations: BAPS 160-24 SILVER PLATING Limitation: Limited to maximum 200 ksi BAPS 160-26 ELECTROLESS NICKEL PLATING Limitation: limited to: Limitation: Class 1 Limitation: Class 2 for frozen process 100575140X for P/N`s 5751400/401/402 Limitation: Class 3 Limitation: limited to: Limitation: Class 1 Limitation: Class 2 for frozen process 100575140X for P/N`s 5751400/401/402 Limitation: Class 3 Limitation: Limitation: Class 2b for frozen process CF1555253 for PN CF1555253-001 BAPS 160-39 TIN PLATING (ELECTRODEPOSITED) Limitation: Limitation to the non-ferrous and ferrous alloys below 180 ksi BAPS 168-15 STRESS RELIEF OF METALS Limitation: OVEN #1 LIMITED TO 630F MAX. OVEN #4 LIMITED TO 1000F MAX. BAPS 185-02 SHOT PEENING OF METAL PARTS Limitation: LIMITED TO AUTOMATED AND MANUAL ROTORY PEENING(AD:00/982) Limitation: LIMITED TO AUTOMATED AND MANUAL ROTORY PEENING(AD:00/982) Limitation: Limite to Machine Wheelabrator (Wheel Blast SP-60) with the working zone : 0.0 to 7.5 inches Limitation: on the rotary table and 0.0 to 2.5 inches by 32 inches maximum high from the rotary table MPS 250-342 HEAT TREATMENT OF STEEL Limitation: LIMITED TO STEEL OVEN 1 (630 F MAX) & OVEN 2 (1000 F MAX) Page 582 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PPS 30.04 STEEL HEAT TREATMENT - CARBON AND LOW ALLOY STEELS Limitation: Stress Relief & Embrittlement Relief Limitation: Oven# 4 & Oven# 11 PPS 30.06 PRECIPITATION HARDENABLE (PH) STAINLESS STEEL Limitation: Embrittlement Relief Limitation: Oven#1, Oven# 4 & Oven# 11 PPS 34.35 APPLICATION OF POWDER COATINGS (F28) Limitation: Type 1 PRC-DESOTO INTERNATIONAL, INC., 0000106921 17451 VON KARMAN AVE. IRVINE, CA US, 92614-6205 TEL: 949-474-0400 FAX: 949-474-7269 Class: C MANUFACTURER PRC-DESOTO INTL., 0000107730 11601 UNITED ST. MOJAVE, CA US, 93501-7048 TEL: 661 824 4532 FAX: 905 629 7009 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM PRC-DESOTO INTL., 0000106857 7 ALL DE LA PLAINE GONFREVILLE L'ORCHER, 76 FR, 76700 TEL: 0235 535400 FAX: 0235 535411 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM PRC-DESOTO INTL., 0000105839 DARLINGTON ROAD SHILDON, DL GB, DL4 2QP TEL: 1 388 770541 FAX: 1 388 774373 Class: C MANUFACTURER PRC-DESOTO INTL. INC., 0000101883 2750 114TH ST., SUITE 400 GRAND PRAIRIE, TX US, 75050-8735 TEL: 800 228 5541 FAX: 817 640 1058 Class: C MANUFACTURER PRECI-DIP SA, 0000137427 RUE ST-HENRI 11 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 583 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification DELEMONT, JU CH, 2800 TEL: 0041-32-421-0... FAX: 0041-32-421-0 Learjet Approved Suppliers Scope of Approval Limitation: Limited to AS39029 for products where company is listed on the specification QPL PRECISE FLIGHT INC., 0000101925 63354 POWELL BUTTE ROAD BEND, OR US, 97701-9417 TEL: 541-382-8684 FAX: 541 388 1105 Class: B EQUIPMENT SUPPLIERS D DISTRIBUTOR PRECISION AEROSPACE CORP., 0000107805 11155 JERSEY BLVD., SUITE A RANCHO CUCAMONGA, CA US, 91730-5148 TEL: 909-980-8855 FAX: 909-980-5216 Class: A SUBCONTRACTORS PRECISION AIRCRAFT MACHINING, 0000107301 10640 ELKWOOD ST. SUN VALLEY, CA US, 91352-4631 TEL: 818-768-5900-226 FAX: 818 768 1409 Class: C MANUFACTURER PRECISION AVIATION INC., 0000101957 8124 LOCKHEED ST. HOUSTON, TX US, 77061-4009 TEL: 713 644 7383 FAX: 713 644 7385 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS C MANUFACTURER PRECISION ELECTRONICS CORPORATION, 0000108887 70 BARTOR ROAD TORONTO, ON CA, M9M 2G5 TEL: 416-744-8840-225 FAX: 416 744 6545 Class: C MANUFACTURER PRECISION ELECTRONICS LLC, 0000103091 5000-A CLARK HOWELL HWY. ATLANTA, GA US, 30349-6038 TEL: 404 305 2512 FAX: 404 765 1722 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: In accordance with FAA certificate PRZR073K PRECISION ENGINE LLC., Class: 0000107302 Specification Controlled: BAPS 186 CHEMICAL MILLING OF ALUMINUM PPS 42.01 CHEMICAL MILLING OF ALUMINUM AND ALUMINUM ALLOYS PSPEC 706 CHEMICAL MILLING OF ALUMINIUM ALLOYS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Class A approval limited to part no 215T51520-40 . Systems with Limitations: Page 584 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 3220 100TH ST. S. W., BLDG. E EVERETT, WA US, 98204-1303 TEL: 425 347 2800 FAX: 425 353 9431 C MANUFACTURER 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval HJ6R589N & EASA dual approval EASA.145.4781. PRECISION FABRICS GROUP INC., 0000126799 301 EAST MEADOWVIEW ROAD GREENSBORO, NC US, 27406 TEL: 336 510 8055 FAX: 336 510 8003 Class: C MANUFACTURER PRECISION INVESTMENTS CASTINGS LIMI, 0000110053 DAVENPORT LANE ALTRINGHAM, CH GB, WA14 5DS TEL: 0161 928 5811 FAX: 0161 927 7023 Class: A SUBCONTRACTORS C MANUFACTURER PRECISION LASEER PROCESSING LTD., 0000120286 BUTLERS LEAP INDUSTRIAL ESTATE RUGBY, WA GB, CV21 3RQ TEL: 01788 546004 FAX: 01788 546005 Class: A SUBCONTRACTORS PRECISION MACHINE OF SAVANNAH, 0000108946 8 TELFAIR PLACE SAVANNAH, GA US, 31415-9502 TEL: 912-234-1107-110 FAX: 912 234 1148 Class: C MANUFACTURER PRECISION MACHINING SHEET METAL, 0000102284 2250 FORBES BLVD. N., #101 TUCSON, AZ US, 85745-1448 TEL: 520 622 0050 FAX: 520 624 9643 Class: A SUBCONTRACTORS PRECISION MECHANISMS CORP., 0000101040 50 BOND ST. WESTBURY, NY US, 11590-5002 TEL: 516 333 5955 FAX: 516 333 5956 Class: B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM Materials with manufacturer # 348 Specification Controlled: BAPS 188-05 LASER CUTTING OF METALS PPS 01.13 LASER CUTTING TITANIUM Page 585 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification PRECISION PRODUCTS CO., 0000101507 2524 LEONINE S. WICHITA, KS US, 67217-1071 TEL: 316 943 1314 FAX: 316 943 1331 Class: A SUBCONTRACTORS PRECISION SENSORS INC., 0000100871 50 SEEMANS LANE MILFORD, CT US, 06460-4365 TEL: 203 877 2795 FAX: 203 877 8752 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER PRECISION SPECIALTY METALS INC., 0000107307 3301 MEDFORD ST. LOS ANGELES, CA US, 90063-2527 TEL: 877-776-7253 FAX: 323-475-3255 Class: C MANUFACTURER PRECISION TUBE CO., 0000107310 287 WISSAHICKON AVE. & CHURCH ROAD NORTH WALES, PA US, 19454 TEL: 215 699 5801 FAX: 215 699 0761 Class: C MANUFACTURER PRECISIONFORM INC., 0000107304 148 W. AIRPORT ROAD LITITZ, PA US, 17543-7624 TEL: 717-560-7610-428 FAX: 717 569 4792 Class: C MANUFACTURER PRECIX INC., 0000106661 744 BELLEVILLE NEW BEDFORD, MA US, 02745-6010 TEL: 508 998 4000 FAX: 508 998 4101 Class: C MANUFACTURER PREECE INC., 0000103213 26845 VISTA TERRACE LAKE FOREST, CA US, 92630 Class: C MANUFACTURER Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 586 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 949 770 9411-5 FAX: 949 380 8681 PREMIER SHOT CO., 0000108455 1666 ENTERPRISE PKWY. TWINSBURG, OH US, 44087 TEL: 330 405 0583 FAX: 330 405 0584 Class: C MANUFACTURER PREMIER SPINNING LTD., 0000128661 UNIT 7, POCKET WORKSHOPS BOLTON, LA GB, BL3 5ER TEL: 0120 4380 880 FAX: 999 999 9999 Class: C MANUFACTURER PRIMAVERA INTERIOR FURNISHINGS LTD., 160 PEARS AVE., SUITE 110 TORONTO, ON CA, M5R 3P8 TEL: 416 921 3334 FAX: 416 921 3227 0000111058 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods PRIME AIR LLC, 0000137688 7447 N.ST. LOUIS AVE STOKIE, IL US, 60076 TEL: 001-847-583-1300 FAX: 514-855-5000 Class: D DISTRIBUTOR PRIMUS INTL. - WALDEN'S DIV., 0000127918 3030 N. ERIE AVE. TULSA, OK US, 74115 TEL: 918 836 6317 FAX: 918 836 5456 Class: A SUBCONTRACTORS Specification Controlled: PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PRISM AEROSPACE DBA JET MANUFACTURI, 13445 ESTELLE ST. CORONA, CA US, 92879-1877 TEL: 951 736 9316 FAX: 951 736 9311 Class: A SUBCONTRACTORS Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Manual Touch-up to surfaces less than 4 sqin total BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Manual Touch-up to surfaces less than 4 sqin total BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to 'Manual Riveting' Only 0000108764 Page 587 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Limited to wet installation of fasteners and faying surface for installation of Limitation: nutplates only BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT Limitation: Limited to wet installation of fasteners and faying surface for installation of Limitation: nutplates only. BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: to use of Alodine 1132 prep-pen for surfaces less than 4 sqin total. coating (no more than 1" Limitation: width). BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to use Aodine 1132 prep pen on surfaces less than 4sqft BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS PRIVATEER LTD., 0000128345 500 MAIN ST., UNIT 6 DEEP RIVER, CT US, 06417 TEL: 860 526 1838 FAX: 999 999 9999 Class: C MANUFACTURER PRO TAPES AND SPECIALITES INC., 0000134068 621 ROUTE 1 SOUTH NORTH BRUNSWICK, NJ US, 08902 TEL: 732 346 0900 FAX: 732 729 7373 Class: C MANUFACTURER PROCESOS TERMICOS Y, 0000121701 AVE. TLC #150 PARQUE INDUSTRIAL APODACA, NL MX, 66600 TEL: 801-918-5092 FAX: 818 386 5525 Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Specification Controlled with Limitations: BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: Limited to: 2024 tube: 0.020"-0.049"range thickness, and 6061tube: 0.035"- 0.065" Limitation: Limited to: 2024 tube: 0.020"-0.049"range Page 588 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval thickness, and 6061tube: 0.035"- 0.065" Limitation: All Aluminum Alloys, Bare & Clad from 0.035" to 0.125" range thickness . PROCESSI SPECIALI S.R.L., 0000122854 VIA ORSO MARIO CORBINO 3 BRINDISI, BR IT, 72100 TEL: 831 548 41 FAX: 831 548 523 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-1A INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-29 REMOVAL OF SHOT PEEN RESIDUE FROM ALUMINUM ALLOYS AND TITANIUM ALLOY PARTS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 185-02 SHOT PEENING OF METAL PARTS CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limited to surface preparation of parts only. PRODUCT MANUFACTURING INC., 4425 W. MAY ST. WICHITA, KS US, 67209 0000136763 Class: A SUBCONTRACTORS Page 589 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 316-977-7457 FAX: 316-942-7936 PRODUCT MFG. CO., 0000101779 4330 MAY ST. WICHITA, KS US, 67209-2841 TEL: 316-942-7931-421 FAX: 316 942 7936 Class: A SUBCONTRACTORS PRODUCTOS ELECTROMECANICOS BAC S.A., CALLE PONIENTE 4 Y NORTE 7 NO. 1 H. MATAMOROS, TMS MX, 87494 TEL: 868 810 8119 FAX: 868 812 8152 Class: C MANUFACTURER 0000110326 PRODUCTOS RIVIAL, S.A. DE C.V., 0000132442 CALLE CAMPO 19151 FRACC. CERRO COLORADO TIJUANA, BC MX, 22223 TEL: 6646250695 FAX: 6646250695 Class: C MANUFACTURER PRODUITS ELECTROLATION INC., 0000106976 990 BERGAR LAVAL, QC CA, H7L 5A1 TEL: 450 972 6556 FAX: 450 972 1557 Class: D DISTRIBUTOR PRODUITS ENVIRONNEMENTAUX, 0000109016 19500 TRANS-CANADA, SUITE 200 BAIE D'URFE, QC CA, H9X 3S4 TEL: 514 457 8000 FAX: 514 457 1300 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: PRODUCT GREENSOLV 274 PRODUITS INTEGRES AVIOR INC., 0000107446 380 MONTEE-DE-LIESSE ST-LAURENT, QC CA, H4T 1N8 TEL: 514 739 3193 FAX: 514 739 8961 Class: A SUBCONTRACTORS Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Page 590 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Limitation: To touch-up ONLY . BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: FAY-MM Faying surface bond ( Direct Interface Contact ) Limitation: AFA-MM Bonding Through Fasteners Limitation: IFF-MM Interference Fit Fasteners Limitation: BJP-MM / BST-MM Jumpers / staps Limitation: GND-MM Grounding Studs BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Safetying : method 1: lock wire ONLY Limitation: Lock washers Limitation: Cotter pins BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Manual Operation ONLY BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING Limitation: Touch-up ONLY . BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 2 ( touch-up ) ONLY . BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 2 ( touch-up ) ONLY . PRODUMAX LTD., 0000109817 UNIT 2, SAPPER JORDAN ROSSI PARK, OTLEY SHIPLEY, YW GB, BD17 7AX TEL: 044 1943 461 713 FAX: 044 1943 850 Class: A SUBCONTRACTORS Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 185-000 GRINDING OF STEEL PARTS PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN PPS 25.30 BONDING USING DHMS A6.09 EPOXY ADHESIVE PSPEC 907 INSTALLATION & RETENTION OF BEARINGS BY GROOVE STAKING Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to Installation of Manual Rivets Only. BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Approval is limited to Application of Fillet Page 591 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Seal Around BAPS 157-30 SEALANT Limitation: Seal Around Periphery of Bushings Only. APPLICATION OF HIGH TEMPERATURE (FIRE WALL) Approval is limited to Application of Fillet Periphery of Bushings Only. PROFOM INC., 0000129224 1055 AUTOROUTE 440 O. LAVAL, QC CA, H7L 3W3 TEL: 800 363 4310 FAX: 450 967 4313 Class: C MANUFACTURER PROFORM, 0000117742 4 - 8 ROUTE DU CAILLOU, PARC DES SABLES CHAPONOST, 69 FR, 69630 TEL: 33 4 7267 1300 FAX: 33 4 7267 1319 Class: A SUBCONTRACTORS PROGRESSIVE PRODUCTS INC., 0000101890 1650 7TH ST. RIVERSIDE, CA US, 92507 TEL: 9517849930-11 FAX: 9517849932 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods PROJECTS UNLIMITED INC., 0000102760 6300 SAND LAKE ROAD DAYTON, OH US, 45414-2649 TEL: 937 918 2200 FAX: 937 918 2241 Class: C MANUFACTURER PROMAT UK LIMITED, 0000131402 8 THE STERLING CENTRE BRACKNELL, BK GB, RG12 2TD TEL: 01344 381 381 FAX: 01344 381 381 Class: B EQUIPMENT SUPPLIERS PROTECH CHEMICALS LTD, 0000134836 7600 HENRI BOURASSA WEST Class: C MANUFACTURER Specification Controlled: PSPEC 205 THE BENDING AND FLARING OF PIPES AND DUCTS PSPEC 220 BULGE FORMING OF THIN WALLED DUCTS PSPEC 222 FABRICATION OF NCKEL BASED SUPERALLOYS PSPEC 300 PENETRANT FLAW DETECTION PSPEC 501 MANUAL ARGON ARC WELDING PSPEC 512 MECHANISED ORBITAL WELDING Page 592 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval SAINT LAURENT, QC CA, H4S 1W3 TEL: 514 745 0200 FAX: 514 745 9423 PROTECH CHEMICALS LTD, 0000134811 150 KLONDIKE ROAD NORTH YORK, ON CA, M9L 1X3 TEL: 416 667 9697 FAX: 416 667 0460 Class: C MANUFACTURER PROTECH METAL FINISHING, LLC, 0000131033 120 TELLICO PORT ROAD VONORE, TN US, 37885 TEL: 423 884 2000 FAX: 423 884 2000 Class: A SUBCONTRACTORS PROTECTIVE COATINGS INC., 0000108295 1208 4TH AVE. N. KENT, WA US, 98032 TEL: 253 854 9330 FAX: 253 859 0749 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: RESTRICTED ONLY TO ALKALINE CLEANING OF ALU. ALLY.INOAKITE 166 SOL.. REF DEV.1735 APRIL 5/99, EVALUATION BASED ON QD 4.6-40. Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 185-02 SHOT PEENING OF METAL PARTS Page 593 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval PROTHANE INC., 0000107318 8219 ESQUESING LINE MILTON, ON CA, L9T 2X9 TEL: 905 878 7233-1 FAX: 905 878 6684 Class: C MANUFACTURER PROVINCIAL AEROSPACE LTD., 0000124192 RCAF ROAD, HANGAR NO 1 ST-JOHN, NF CA, A1A 5B5 TEL: 709 576 1643 FAX: 709 576 1699 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to TCCA AMO 6-91 PRYER AEROSPACE, LLC, 0000136263 3301 N. CIEDA DRIVE CLAREMORE, OK US, 74017 TEL: 918-835-8885 FAX: 918-835-3686 Class: A SUBCONTRACTORS PRYER AEROSPACE, LLC, 0000136244 2230 N SHERIDAN RD. TULSA, OK US, 74115-3634 TEL: 918 835 8885 FAX: 918 835 3686 Class: A SUBCONTRACTORS PTI TECHNOLOGIES INC., 0000100926 501 DEL NORTE BLVD. OXNARD, CA US, 93030-7983 TEL: 805 604 3949 FAX: 805-604-3701 Class: B EQUIPMENT SUPPLIERS PULSCO INC., 0000107320 17945 SKY PARK CIR., SUITE G IRVINE, CA Class: C MANUFACTURER Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Specification Controlled with Limitations: BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: Solution heat treatment and natural aging only of bare aluminum alloy 0.040 to 0.100 inch. Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Specification Controlled with Limitations: BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS Limitation: Solution heat treatment and natural aging only of bare aluminum alloy 0.040 to 0.100 inch. Page 594 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval US, 92614-6318 TEL: 949 261 1717-310 FAX: 949 975 0532 PURITAS METAL PRODUCTS INC., 0000136182 7720 RACE ROAD NORTH RIDGEVILLE, OH US, 44039 TEL: 440-353-1917 FAX: 440-353-1918 Class: C MANUFACTURER PUROLATOR FACET INC., 0000101583 8439 TRIAD DR. GREENSBORO, NC US, 27409-9018 TEL: 336-217-3816 FAX: 336-668-4452 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER PWI, INC., 0000100845 109 S. KNIGHT ST. WICHITA, KS US, 67213-2417 TEL: 316 942 2811 FAX: 316 942 6209 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS C MANUFACTURER E MAINTENANCE ORGANIZATION PWV STUDIOS LTD., 0000105900 1650 BROADWAY AVE NW GRAND RAPIDS, MI US, 49504 TEL: 616 361 5659 FAX: 616 361 1090 Class: H COMMERCIAL OFF THE SHELF Q.E.D. INC., 0000101868 2920 S. HALLADAY ST. SANTA ANA, CA US, 92705-5623 TEL: 714 546 6010-106 FAX: 714 546 1638 Class: B EQUIPMENT SUPPLIERS QPM AEROSPACE, 0000108861 17383 SACRAMENTO N. E. PORTLAND, OR US, 97230-5943 TEL: 503 261 2770 FAX: 503 261 2777 Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval PJ2R085L & EASA dual approval EASA.145.5092. Specification Controlled: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Page 595 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval MPS 250-201 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES AEROSPATIALE A330/A340 PROGRAM MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 Specification Controlled with Limitations: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: limited to P/N 601R38597 and CC670-10601 for wet installation of bushings,fasteners& fillet Limitation: seal around bushing oly . BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to type 2 - touch up only. QRP INC., 0000127610 2307 MERCANTILE DR. N.E. LELAND, NC US, 28451 TEL: 910 371 0700 FAX: 910 371 9055 Class: C MANUFACTURER QUADRANT CONNECTIONS LTD., 0000108987 WATLING ST. RADLETT, HT GB, WD7 7H2 TEL: 1923 853622 FAX: 1923 857567 Class: C MANUFACTURER QUADRANT EPP BELGUIM N.V., 0000126219 I.P. NOORD - R. TAVEMIERLAAN 2 TIELT, 02 BE, 8700 TEL: 51 42 35 11 FAX: 51 42 33 00 Class: A SUBCONTRACTORS C MANUFACTURER QUADRANT EPP UK LTD., 0000109815 WOODHOUSE ROAD TODMORDEN, LA GB, OL14 5TP TEL: 0 1706811042 FAX: 01 706 817571 Class: A SUBCONTRACTORS QUADRANT EPP USA INC., 2120 FAIRMONT AVE. READING, PA Class: C MANUFACTURER 0000121038 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limitation to Plastic stock shapes Page 596 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 19605-3041 TEL: 610 320 6804 FAX: 610 320 6956 QUADRANT EPP USA INC., 0000121037 700-900 NORTH-SOUTH ROAD SCRANTON, PA US, 18504-1432 TEL: 610 320 6805 FAX: 610 320 6694 Class: C MANUFACTURER QUADRANT EPP USA, INC., 0000136541 2530 NORTH FOURTH STREET WYTHEVILLE, VA US, 24382 TEL: 610-320-6600 FAX: 610-320-6868 Class: C MANUFACTURER QUAKER CHEMICAL B.V., 0000134005 INDUSTRIEWEG 7, 1422 AH UITHOORN UITHROORN, 08 NL, 1420 AA TEL: 39 0 297 544644 FAX: 31 0 297 54469 Class: C MANUFACTURER QUAKER CHEMICAL CORP., 0000108453 901 HECTOR ST. CONSHOHOCKEN, PA US, 19428-2307 TEL: 610 832 4000 FAX: 610 832 8604 Class: C MANUFACTURER QUAKER CHEMICAL S.A., 0000133512 POLIGONO INDUSTRIAL CAN BERNADES-SUBIRA, SANTA PERPETUA DE MOGODA (BARCELONA), 08 ES, 08130 TEL: 34 93 5742700 FAX: 34 93 5601142 Class: C MANUFACTURER QUAKER CITY PLATING, 0000100672 11729 E. WASHINGTON BLVD. WHITTIER, CA US, 90606-2613 TEL: 562 447-1813 FAX: 562 945 8099 Class: A SUBCONTRACTORS QUALICHEM INC, 0000134600 2003 SALEM INDUSTRIAL DRIVE Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to Learjet Program only for Plastic stock shapes Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 597 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification SALEM, VA US, 24153 TEL: 1 540 375 670... FAX: 1 540 375 388 Scope of Approval Limitation: EMCM-001 Manufacturer QUALIFIED METAL FABRICATORS LTD., 0000108712 55 STEINWAY BLVD. TORONTO, ON CA, M9W 6H6 TEL: 416-675-7777-224 FAX: 416 675 1660 Class: B EQUIPMENT SUPPLIERS QUALITY AIRCRAFT ACCESSORIES, 0000131674 5746 E. APACHE TULSA, OK US, 74115 TEL: 877 833 6948 FAX: 918 835 2804 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: In accordance with FAA certificate no QY1R334Y and EASA 145.5982 QUALITY ALUMINUM FORGE, LLC, 0000107325 810 LEMON ST. N. ORANGE, CA US, 92867-6616 TEL: 714 639 8191-210 FAX: 714 639 2673 Class: A SUBCONTRACTORS C MANUFACTURER QUALITY NDE LTD., 0000107326 164 ST-JEAN-BAPTISTE MERCIER, QC CA, J6R 2C2 TEL: 1-800-361-3630 FAX: 450-691-6101 Class: D DISTRIBUTOR QUAM NICHOLS CO., 0000104812 234 MARQUETTE ROAD E. CHICAGO, IL US, 60637-4091 TEL: 773 488 5800-134 FAX: 773 488 6944 Class: C MANUFACTURER QUEENSWAY MACHINE PRODUCTS LTD., 0000107808 8 RANGEMORE ROAD TORONTO, ON CA, M8Z 5H7 TEL: 416 259 4261 FAX: 416 259 6971 Class: A SUBCONTRACTORS QUELOZ & ASSOCIES INC., Class: 0000107328 Specification Controlled: LES 1004 PENETRANT INSPECTION Specification Controlled: Page 598 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 4100 JEAN MARCHAND QUEBEC, QC CA, G2C 1Y6 TEL: 418 845 0666 FAX: 418 845 0703 A SUBCONTRACTORS QUEST-ONE AEROSPACE, 0000119336 570 W. CROSSVILLE, SUITE 201 ROSWELL, GA US, 30075-7510 TEL: 770 609 1394 FAX: 770 640 1348 Class: D DISTRIBUTOR QUIRK WIRE CO., 0000108217 146 EAST MAIN ST. WEST BROOKFIELD, MA US, 01585 TEL: 508 867 3155 FAX: 508 867 5132 Class: C MANUFACTURER R & B ELECTRONICS INC., 0000109030 1520 INDUSTRIAL PARK DR. SAULT STE-MARIE, MI US, 49783-1474 TEL: 906 632 1542 FAX: 906 632 8105 Class: C MANUFACTURER R & B ELECTRONICS INC., 0000104726 2374 DALLAS ST. N. W. GRAND PRAIRIE, TX US, 75050-4903 TEL: 906 632 1542 FAX: 906 632 8105 Class: C MANUFACTURER R D TAYLOR, 0000108047 308 ALBERTBRIDGE ROAD BELFAST, BL GB, BT5 4GX TEL: 02890 45955 FAX: 02890 459779 Class: D DISTRIBUTOR R S COMPONENTS LTD., 0000108049 CORBY NORTHAM PTONSHIRE, NH GB, NN17 9RS TEL: 1536 201 234 FAX: 1536 201 501 Class: D DISTRIBUTOR Learjet Approved Suppliers Scope of Approval BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS Page 599 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification R-MECA PRECISION SUD-OUEST, 0000136529 12 RUE JACQUES BABINET TOULOUSE, 64 FR, 31100 TEL: 33-611-604266 FAX: 999-999-9999 Class: A SUBCONTRACTORS RA-NAV LABORATORIES, 0000101147 3100 WEST 1-44 SERVICE ROAD OKLAHOMA CITY, OK US, 73112-6242 TEL: 405 947 3361 FAX: 405 947 8343 Class: B EQUIPMENT SUPPLIERS RACAL ACOUSTICS, 0000110609 WAVERLEY INDUSTRIAL ESTATE HARROW, MX GB, HA1 4TR TEL: 20 8515 6200 FAX: 20 8427 0350 Class: C MANUFACTURER RADIAL BEARING CORP., 0000100852 21 TAYLOR ST. DANBURY, CT US, 06810-6922 TEL: 203 744 0323 FAX: 203 744 1691 Class: C MANUFACTURER RADIALL, 0000125883 B.P. 39 RUE VELPEAU Z.1.N.1 CHATEAU RENAULT, 37 FR, 37110 TEL: 480 682 9420 FAX: 480 682 9403 Class: C MANUFACTURER RADIALL, 0000135947 CD OBREGON BVD CIRCUNVALACION Y BVD LAS OBREGON, SON MX, 85065 TEL: 480 682 9400-420 FAX: 480 682 9400 Class: C MANUFACTURER RADIALL SA DIVISION, 0000128163 15 RUE DE LA GARENNE ST-QUENTIN FALLAVIER, 38 FR, 38295 Class: C MANUFACTURER Learjet Approved Suppliers Scope of Approval Page 600 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 33 (0)4 74 94... FAX: 33 (0)4 74 94 RADIALL USA, 0000137428 104, JOHN W. MURPHY DRIVE NEW HAVEN, CT US, 06513 TEL: 203-776-2813 FAX: 203-776-8294 Class: C MANUFACTURER RADIALL USA INC., 0000121788 8950 SOUTH 52ND STREET, SUITE 401 TEMPE, AZ US, 85284 TEL: 480-682-9400 FAX: 203-401-3278 Class: D DISTRIBUTOR RADIANT POWER CORP., 0000101569 7135 16TH ST. E., SUITE 101 SARASOTA, FL US, 34243-6818 TEL: 941-301-9146 FAX: 941 739 3201 Class: C MANUFACTURER RAH INDUSTRIES, 0000107329 24800 ROCKEFELLER AVE. VALENCIA, CA US, 91355-1145 TEL: 661-295-5190 FAX: 661-295-5196 Class: A SUBCONTRACTORS RAINIER RUBBER CO., 0000110069 15660 NELSON PLACE S. SEATTLE, WA US, 98188-5506 TEL: 425 227 4500 FAX: 425 227 4300 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to material specification AMS 3248 and AAA 59588 RAISBECK ENGINEERING INC., 0000102088 4411 RYAN WAY S. SEATTLE, WA US, 98178-2021 TEL: 206 723 2000 FAX: 206 723 2884 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS RAKAR INC., 0000107330 1700 EMERSON AVE. OXNARD, CA Class: A SUBCONTRACTORS C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to P/N 82820167 & 82822269 Page 601 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval US, 93033-1847 TEL: 805 487 2721 FAX: 805 483 2778 RALMARK CO., 0000100959 83 LUZERNE AVE. E. LARKSVILLE, PA US, 18704-1026 TEL: 570 288 9331-115 FAX: 570 288 0902 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER RAM INC., 0000109676 808 E. 6TH ST. CISCO, TX US, 76437-2114 TEL: 254 442 1008 FAX: 254 442 1009 Class: C MANUFACTURER RAMM AEROSPACE, 0000126724 2057 COHEN ST-LAURENT, QC CA, H4R 2N7 TEL: 514 336 7266 FAX: 514 336 7260 Class: Specification Controlled: A SUBCONTRACTORS BAPS 710-001 INTERIOR AIRCRAFT, VARNISH APPLICATION E MAINTENANCE ORGANIZATION Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: For Aircraft Interior manufacture and/or assembly only. BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: For Aircraft Interior manufacture and/or assembly only. BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 2 Manual Application – Alodine 1132 Touch and Prep Pen only. RAMM AEROSPACE INC, 0000134732 4500 DOBRIN ST-LAURENT, QC CA, H4R 2L6 TEL: 514 336 7266 FAX: 514 336 7260 Class: A SUBCONTRACTORS RAPID AIRCRAFT REPAIR INC., RR#5 PETERBOROUGH AIRPORT PETERBOROUGH, ON CA, K9J 6X6 Class: E MAINTENANCE ORGANIZATION 0000130311 Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Touch-up application BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type II, touch-up using Prep. Pen Page 602 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 705 742 4688 FAX: 705 742 7233 RAPID PROCESSING SOLUTIONS INC., 0000131881 1367 S. ANNA ST. WICHITA, KS US, 67209 TEL: 316 265 2001 FAX: 316 265 2002 Class: C MANUFACTURER RARE METAL SOURCE, 0000108661 166 INDUSTRIAL WAY N. DALLAS, GA US, 30132-2438 TEL: 770-443-4500 FAX: 770-443-4600 Class: C MANUFACTURER RATIER-FIGEAC, 0000102512 ROUTE DE CAHORS FIGEAC, 46 FR, 46101 TEL: 5 65 50 56 52 FAX: 5 65 34 06 26 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION RAYCON INDUSTRIES, 0000105038 620 N. BERRY STREET BREA, CA US, 92821-3023 TEL: 714-257-9192 FAX: 714-257-9193 Class: C MANUFACTURER RAYTHEON COMPAGNY, 0000100964 1010 PRODUCTION ROAD FORT WAYNE, IN US, 46808-4106 TEL: 260-429-7714 FAX: 260-429-8473 Class: B EQUIPMENT SUPPLIERS RBC AEROSTRUCTURES, 0000128904 123 COMMERCE WAY WESTMINSTER, SC US, 29693 TEL: 864 886 4600 FAX: 864 886 4615 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS RBC AIRCRAFT PRODUCTS INC., 2788 WINSTED ROAD TORRINGTON, CT Class: B EQUIPMENT SUPPLIERS C MANUFACTURER 0000121685 Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Page 603 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval US, 06790-2427 TEL: 860 626 7800 FAX: 860-626-7886 RBC HEIM BEARINGS, 0000103547 60 ROUND HILL ROAD FAIRFIELD, CT US, 06824-5172 TEL: 203 255 1511 FAX: 203 267 5012 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER RBC PIC DESIGN, 0000101055 86 BENSON ROAD MIDDLEBURY, CT US, 06762-3215 TEL: 203 758 8272 FAX: 203 758 8271 Class: C MANUFACTURER RBC SOUTHWEST PRODUCTS, 0000134580 5001 B. COMMERCE DRIVE BALDWIN PARK, CA US, 91706 TEL: 626 358 0181 FAX: 626 303 6141 Class: C MANUFACTURER RBC TRANSPORT DYNAMICS CORP., 0000102835 3131 W. SEGERSTROM AVE. SANTA ANA, CA US, 92702-1953 TEL: 714 546 3131 FAX: 714 545 9885 Class: C MANUFACTURER RCF TECHNOLOGIES INC., 0000101140 320 COMMERCE LOOP VIDALIA, GA US, 30474-5643 TEL: 912 537 1115 FAX: 912 537 6511 Class: C MANUFACTURER REBLING PLASTICS, 0000110237 150 FRANKLIN DRIVE WARRINGTON, PA US, 18976 TEL: 215 343 2400 FAX: 215 343 1780 Class: C MANUFACTURER RECAERO, 0000108277 PARC TECHNOLOGIQUE DELTA SUD Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 604 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification VERNIOLLE, 09 FR, 09340 TEL: 33 561 67 90 10 FAX: 33 5 6169 6235 Scope of Approval 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Limitation: SUPPLIER TO AEROSPATIALE PROGRAM ONLY Specification Controlled: BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL MPS 250-021 HARD CHROMIUM PLATING BY ELECTROLYTIC DEPOSIT ON STEEL AND NICKEL ALLOY PARTS AEROSPATIALE A330/A340 MPS 250-023 PAINTING DETAIL PARTS AEROSPATIALE A330/A340 MPS 250-024 CHROMIC ACID ANODIZING AEROSPATIALE A330/A340 MPS 250-225 INSTALLATION OF SOLID RIVETS MPS 250-301 PENETRANT INSPECTION MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 MPS 250-341 HEAT TREATMENT OF ALUMINUM Specification Controlled with Limitations: BAPS 180-01 ALKALINE CLEANING Limitation: Limited to cleaning before cad plating to MPS250-028 MPS 250-028 CADMIUM PLATING Limitation: Limited to parts with UTS <160 KSI. MPS 250-201 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES AEROSPATIALE A330/A340 PROGRAM Limitation: Limited to non-intrusive identification method only RECMAR PRODUCTS, 0000128239 9222 EASTHAVEN BLVD. HOUSTON, TX US, 77075 TEL: 713 944 4885 FAX: 713 944 4809 Class: C MANUFACTURER RECORD TECHNOLOGY & DEVELOPMENT, 0000107335 15 E. BEAVER CREEK ROAD RICHMOND HILL, ON CA, L4B 1B3 TEL: 905 709 8849 FAX: 905 709 9680 Class: A SUBCONTRACTORS REDCLIFFE PRECISION LTD., 0000121260 123-127 SOUTH LIBERTY LANE BRISTOL, BR Class: A SUBCONTRACTORS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 605 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval GB, BS2 2SZ TEL: 01179 635616 FAX: 01179 635674 REFA INTERNATIONAL INC., 0000106412 414 FORK DR. W. ARLINGTON, TX US, 76012-3449 TEL: 817-460-7842 FAX: 817 468 3890 Class: D DISTRIBUTOR REGAL PLASTICS, 0000100020 522 N. POLK PAPILLION, NE US, 68046-3055 TEL: 402 344 4446 FAX: 402 344 4451 Class: C MANUFACTURER D DISTRIBUTOR REGENT CHEMICAL PRODUCTS LTD, 0000134556 670 DES ERABLES VALLEYFIELD, QC CA, J6T 6G4 TEL: 450 377 3982 FAX: 450 377 9664 Class: C MANUFACTURER REHEAT INTERNATIONAL LTD., 0000131986 RIVERSIDE, OMEGA PARK ALTON, HA GB, GU342UF TEL: 44 0 1420 594000 FAX: 44 0 1420 594 Class: E MAINTENANCE ORGANIZATION REID PRODUCTS, 0000107336 21430 WAALEW ROAD APPLE VALLEY, CA US, 92307-1026 TEL: 760 240 1355 FAX: 760 240 1359 Class: C MANUFACTURER RELATS, S.A., 0000132445 PRIORAT ST., POLIGON INDUSTRIAL LA BORDA CALDES DE MONTBUI, 08 ES, 08140 TEL: 34938654850 FAX: 34938654850 Class: C MANUFACTURER RELIANCE AERO PRODUCTS, 950 S. 6TH AVE. Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS 0000102032 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: AUTHORIZED TO PERFORM "VALUE ADDED" OPERATIONS AS PER P/N: S-1307 ONLY. Page 606 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification MANSFIELD, TX US, 76063-2725 TEL: 817 453 8829-202 FAX: 817 453 3228 Scope of Approval Limitation: CL-215 PARTS RENOLD CHAIN, 0000108656 ASHTON ROAD BREDBURY, CH GB, SK6 2QN TEL: 519-756-6118-... FAX: 519 756 1767 Class: C MANUFACTURER RENTON COIL SPRING CO., 0000101382 425 S. 7TH ST. RENTON, WA US, 98057-2504 TEL: 425 255 1453 FAX: 425 228 0780 Class: A SUBCONTRACTORS C MANUFACTURER REPUBLIC STEEL, 0000122916 2633 EIGHTH ST. N.E. CANTON, OH US, 44704-2311 TEL: 800-232-7157 FAX: 330-438-5814 Class: C MANUFACTURER REPUBLIC STEEL, 0000117315 155 CHATHAM ST. HAMILTON, ON CA, L8P 2B7 TEL: 905-645-3915 FAX: 330 438 5695 Class: C MANUFACTURER REPUBLIC STEEL, 0000108885 401 ROSE AVE. S. E. MASSILLON, OH US, 44646-6870 TEL: 330 837 7131 FAX: 330 837 7017 Class: C MANUFACTURER REPUBLIC STEEL, 0000108879 2800 DUNES HWY. E. GARY, IN US, 46402-1607 TEL: 219 886 8129 FAX: 219 886 8123 Class: C MANUFACTURER REPUBLIC STEEL, Class: 0000120092 Learjet Approved Suppliers Systems with Limitations: Page 607 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 1807 E. 28TH ST. LORAIN, OH US, 44055-1803 TEL: 330 438 5600 FAX: 330 438 5695 C MANUFACTURER 0000 GENERAL LIMITATION / REMARKS Limitation: This Supplier is approved class "C" Manufacturer activities with the following limitation : Limitation: AMS 6415 ( 4340 Steel ) rod/bar for Learjet Programs ONLY . REPUBLIC STEEL, 0000119529 3049 LAKESHORE ROAD-GATE BLASDELL, NY US, 14219 TEL: 330-438-5541 FAX: 330 438 5695 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to 4130 and 4340 alloy products for Bombardier programs. RESIN DESIGNS, LLC., 0000136207 39714 EUREKA DRIVE NEWARK, CA US, 94560 TEL: 510-413-0114 FAX: 510-413-0134 Class: C MANUFACTURER REVERE COPPER PRODUCTS INC., 0000108394 1 REVERE PARK ROME, NY US, 13440-5568 TEL: 800 448 1776 FAX: 315 338 2105 Class: C MANUFACTURER REVIMA APU SAS, 0000135697 1, AVE DU LATHAM CAUDEBEC-EN-CAUX, 47 FR, 76490 TEL: 33 235 563616 FAX: 33 235 563535 Class: E MAINTENANCE ORGANIZATION REVUE THOMMEN AG, 0000110823 HAUPTSTRASSE 85 WALDENBURG, BL CH, 4437 TEL: 4161 965 2222 FAX: 61 961 81 71 Class: E MAINTENANCE ORGANIZATION REXNORD INDUSTRIES INC., 2400 CURTISS ST. DOWNERS GROVE, IL US, 60515-4056 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER 0000100932 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM Qualified Material Page 608 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval TEL: 630-969-1770 FAX: 630 969 1612 REXNORD INDUSTRIES, LLC., 0000107319 2162 UNION PLACE SIMI VALLEY, CA US, 93065-1661 TEL: 805 581 7443 FAX: 805 583 2396 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER REXNORD INDUSTRIES, LLC., 0000134758 2324 CURTISS STREET DOWERS GROVE, IL US, 60515 TEL: 630 719 2337 FAX: 630 969 8752 Class: C MANUFACTURER RICHELIEU HARDWARE LTD., 0000110419 7900 HENRI BOURASSA O. MONTREAL, QC CA, H4S 1V4 TEL: 514 336 4144 FAX: 514 336 9431 Class: H COMMERCIAL OFF THE SHELF RIEKER INC., 0000107346 34 MOUNT PLEASANT ROAD ASTON, PA US, 19014 TEL: 610 500 2000 FAX: 610 500 2002 Class: B EQUIPMENT SUPPLIERS RIM ENTERPRISES, LLC, 0000136761 700 CENTER POINT ROAD CEDAR RAPIDS, IA US, 52402 TEL: 319-393-9727 FAX: 999-999-9999 Class: D DISTRIBUTOR RISBRIDGER LTD., 0000107347 25 TOWERS WAY REDHILL, SY GB, RH1 2LH TEL: 8456 442 323 FAX: 8456 442 453 Class: C MANUFACTURER RISCO INC., 0000110318 390 RISCO CIR. BEAUMONT, CA Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 609 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval US, 92223 TEL: 909 769 2899 FAX: 909 769 2490 RISHO KOGYO LTD., 0000122543 1-9,2-CHOME, DOJIMA KITA-KU, 27 JP, 5300003 TEL: 06 6345 8377 FAX: 06 6345 1585 Class: C MANUFACTURER RJ AVIATION INC., 0000118299 6614 VANDEN ABEELE ST-LAURENT, QC CA, H4S 1Y3 TEL: 514-335-5998 FAX: 514-335-3643 Class: D DISTRIBUTOR RLC (UK) LTD LANGFORD, 0000110016 97 LARGY ROAD CRUMLIN, AT GB, BT29 4RT TEL: 44 (0) 2894 4... FAX: 44 0 1849 452 Class: A SUBCONTRACTORS RMIG A/S, 0000121025 INDUSTRIPARKEN 40 BALLERUP, 001 DK, 2750 TEL: 4544208800 FAX: 4544208801 Class: C MANUFACTURER RMS, 0000107955 8600 EVERGREEN BLVD. MINNEAPOLIS, MN US, 55433-6036 TEL: 763 786 1520 FAX: 763 783 5073 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to provide PS-2266 (vendor mat'l) to Bombardier & subtiers. Specification Controlled: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM MPS 160-08 CADMIUM PLATING OF CARBON AND LOW ALLOY BELOW 220,000PSI, COPPER ALLOYS AND CRES STEELS PSPEC 301 MAGNETIC PARTICLE INSPECTION PSPEC 403 CADMIUM PLATING OF CARBON, LOW ALLOY AND STEELS PSPEC 910 ETCH AND EPOXY PRIMING COATING ALLOYS STEELS STAINLESS Page 610 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification RO-RA AVIATION SYSTEMS GMBH, 0000131726 GEWERBEPARK 8 SCHOERFLING AM ATTERSEE, OÖ AT, 4861 TEL: 7662 57888-815 FAX: 43 7662 57888 9 Class: A SUBCONTRACTORS ROBCO INC., 0000107800 281 AMBASSADOR DR. MISSISSAUGA, ON CA, L5T 2J3 TEL: 905 564 6555 FAX: 905 564 6901 Class: C MANUFACTURER D DISTRIBUTOR ROBERT ALLEN FABRICS (CANADA) LTD., 2880 ARGENTIA ROAD, UNIT 11 MISSISSAUGA, ON CA, L5N 7X8 TEL: 800 363 3020 FAX: 800 463 0339 0000110420 ROBLAT PRECISION MACHINING CO., 0000107812 70 DEERHIDE CRES. WESTON, ON CA, M9M 2Y6 TEL: 416 743 1966 FAX: 416 743 1968 Scope of Approval Specification Controlled with Limitations: BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: limited to lock and tab washer only BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Limited to wet and fillet seal on bushing and bearing installation only BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING Limitation: Limited to Bearing B0307042B4E BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limited to cold installation only . Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods Class: A SUBCONTRACTORS Specification Controlled: BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING PPS 21.20 MIXING AND HANDLING TWO PART SEALANTS PPS 21.21 GENERAL SEALING PRACTICES PPS 25.08 EC-1099 ADHESIVE PPS 25.23 EC-1300 ADHESIVE Specification Controlled with Limitations: BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to Manual Riveting Only ROCHESTER ELECTRONICS LLC, 16 MALCOM HOYT DR. 0000122461 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Page 611 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval NEWBURYPORT, MA US, 01950 TEL: 978-462-9332-... FAX: 978 462 9512 D DISTRIBUTOR ROCKER INDUSTRIES, 0000116306 1500 W. 240TH ST. HARBOR CITY, CA US, 90710-1309 TEL: 310 534 5660 FAX: 310 534 4285 Class: C MANUFACTURER ROCKET AIR SUPPLY INC., 0000101325 724 111TH ST. ARLINGTON, TX US, 76011-7676 TEL: 817-640-5340 FAX: 817 649 7250 Class: D DISTRIBUTOR ROCKWELL COLLINS AEROSPACE &, 0000109173 27300 S.W. PKWY., S. DOCK WILSONVILLE, OR US, 97070 TEL: 319 295 3375 FAX: 319 295 4941 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: In accordance with FAA certificate no F2DR018N and EASA 145.4445 ROCKWELL COLLINS CANADA INC., 0000126001 30 EDGEWATER ST, SUITE 104 OTTAWA, ON CA, K2L 1V8 TEL: 613 254 9845 FAX: 613 254 9850 Class: B EQUIPMENT SUPPLIERS ROCKWELL COLLINS FRANCE, 0000111034 6 DIDIER DAURAT BLAGNAC, 31 FR, 31701 TEL: 534 61 87 39 FAX: 561 71 77 88 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: EASA approval FR.145.121 & FAA Repair Station dual approval R9CY096N. ROCKWELL COLLINS INC., 0000100075 2051 AIRPORT ROAD WICHITA, KS US, 67209-1949 TEL: 316-677-4808 FAX: 316 677 4826 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval NZ2R049L & EASA dual approval EASA.145.4334. ROCKWELL COLLINS INC., Class: 0000100083 Limitation: limited to semi conductor - for Learjet Program only Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to BICCM (Completion center) only Systems with Limitations: Page 612 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval 32125 32ND AVE. S., SUITE 110 FEDERAL WAY, WA US, 98001 TEL: 253 733 3700 FAX: 253 733 3705 E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval RE3R812L & EASA dual approval EASA.145.4336. ROCKWELL COLLINS INC., 0000100087 5159 SOUTHRIDGE PKWY. ATLANTA, GA US, 30349-5966 TEL: 770-991-7256 FAX: 770 991 7278 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval HB4R226M & EASA dual approval EASA.145.4333. ROCKWELL COLLINS INC., 0000107350 400 COLLINS ROAD N.E. CEDAR RAPIDS, IA US, 52498-0505 TEL: 319-295-0401 FAX: 319 295 2194 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER E MAINTENANCE ORGANIZATION ROCKWELL COLLINS INC., 0000101414 1757 CARR RD. SUITE 100E CALEXICO, CA US, 92231-3213 TEL: 1 319-295-7215 FAX: 1 319-295-7215 Class: B EQUIPMENT SUPPLIERS D DISTRIBUTOR ROCKWELL COLLINS INC. USA, 0000111107 2855 HEARTLAND DR. CORALVILLE, IA US, 52241 TEL: 319 295 1000 FAX: 319 295 4941 Class: C MANUFACTURER D DISTRIBUTOR ROCKWELL COLLINS, INC., 0000101508 14192 FRANKLIN AVE. TUSTIN, CA US, 92780-7044 TEL: 714-929-3000 FAX: 714 929 4012 Class: B EQUIPMENT SUPPLIERS ROCKWELL INTL. CORP., 0000100074 1100 W. HIBISCUS BLVD. MELBOURNE, FL US, 32901-2704 TEL: 321 768 7208 FAX: 321 768 7135 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval C5MR761J & EASA dual approval EASA.145.4826. Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair Station approval R4WR962J & EASA dual approval EASA.145.5445. Page 613 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval RODEO CARPET MILLS CORP., 0000102318 5900 E. SLAUSON AVE. CITY OF COMMERCE, CA US, 90040-3020 TEL: 213-728-1518 FAX: 213-728-1135 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS ROGAN CORP., 0000103659 3455 WOODHEAD DR. NORTHBROOK, IL US, 60062-1812 TEL: 847 498 2300 FAX: 847 498 3750 Class: C MANUFACTURER ROGERSON AIRCRAFT CORP., 0000102400 2201 ALTON PKWY. IRVINE, CA US, 92606-5033 TEL: (949) 442-2398 FAX: 949 442 2301 Class: B EQUIPMENT SUPPLIERS ROGERSON AIRCRAFT SYSTEMS, 0000106307 16940 VON KARMAN IRVINE, CA US, 92606-4923 TEL: 949-442-2361 FAX: 949-442-2301 Class: B EQUIPMENT SUPPLIERS ROHI STOFFE GMBH & CO., 0000108630 SCHONLINERSTR 1 GERETSRIED, 09 DE, 82538 TEL: 8171 93540 FAX: 8171 935499 Class: C MANUFACTURER ROHR AERO SERVICES LTD T/A UTC AERO, 0000127492 1 DOW AVE., PRESTWICK INTL. AEROSPACE PA PRESTWICK, SC GB, KA9 2SA TEL: 0129 2670258 FAX: 0129 0670299 Class: E MAINTENANCE ORGANIZATION ROLLON CORP., 0000110467 SUITE B 101 BILBY RD. HACKETTSTOWN, NJ US, 07840 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods Page 614 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 973 300 5492 FAX: 908 852 2714 ROLLS-ROYCE DEUTSCHLAND LTD., 0000104629 ESCHENWEG 11 DAHLEWITZ, 12 DE, 15827 TEL: 337086 2463 FAX: 33 7086-3028 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION ROLLS-ROYCE PLC, 0000116305 WILMORE ROAD, GATE 8 DERBY, ES GB, DE24 9BD TEL: 1332 242424 FAX: 33708 6 3028 Class: C MANUFACTURER ROMAERO S.A., 0000107353 44 FICUSULUI BLVD. SECTOR 1 BUCHAREST, 10 RO, 7154499 TEL: 011 40 215994104 FAX: 011 40 215994 Class: F STRUCTURAL SUPPLIER Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2E MECHANICAL TESTING: PLASTICS, RUBBERS STATIC AND ELASTIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3D HARDNESS AND MICRO HARDNESS BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-10 CHROMIC ACID ANODIZING Page 615 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-32 SULFURIC ACID ANODIZING BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 161-007 APPLICATION OF MIL-L-46010 SOLID FILM LUBRICANT BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 172-34 FUSION WELDING BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS CAPTIVE LABORATORY RONALD C. LISTER CANADA INC., 0000127023 1555 WELLINGTON MONTREAL, QC CA, H3K 1V7 TEL: 514 866 1078 FAX: 514 866 1482 Class: H COMMERCIAL OFF THE SHELF ROSEBANK ENGINEERING PTY LTD., 0000110343 LOCKED BAG 39 BAYSWATER, VIC AU, 3153 TEL: 03 9721 1300 FAX: 03 9720 4996 Class: A SUBCONTRACTORS ROSEMOUNT AEROSPACE INC, 14300 JUDICIAL ROAD BURNSVILLE, MN Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Limited to : 0000107354 Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL CAPTIVE LABORATORY Page 616 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification US, 55306-4898 TEL: 952-892-4156 FAX: 860-660-5171 Learjet Approved Suppliers Scope of Approval Limitation: FAA Repair Center Certificate number L5VR603Y Limitation: European Aviation Safety Agency Certificate # EASA.145.5311 ROSEMOUNT AEROSPACE LTD., 0000117961 CLITTAFORD ROAD, SOUTHWAY PLYMOUTH, DV GB, PL6 6DE TEL: 01752 723375 FAX: 01752 723375 Class: D DISTRIBUTOR ROSEN AVIATION LLC, 0000101912 1020 OWEN LOOP S. EUGENE, OR US, 97402-9197 TEL: 541 342 3802 FAX: 541 342 4912 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION ROSEN SUNVISOR SYSTEMS, 0000110532 4884 FRANKLIN BLVD. EUGENE, OR US, 97403-2458 TEL: 541 747 0034-116 FAX: 541 344 2498 Class: B EQUIPMENT SUPPLIERS ROSLER OBERFLACHENTECHNIK GMBH, 0000133518 VORSTADT UNTERMERZBACH, 09 DE, 96190 TEL: 49 95 33/9 24 0 FAX: 49 95 33/ 9 24 Class: C MANUFACTURER ROTOPRECISION INC., 0000107356 304 WATLINE AVE. MISSISSAUGA, ON CA, L4Z 1P4 TEL: 905 712 3800 FAX: 905 712 3805 Class: D DISTRIBUTOR ROTOR CLIP CO., 0000107357 187 DAVIDSON AVE. SOMERSET, NJ US, 08873-4117 TEL: 732 469 7333 FAX: 732 469 7898 Class: C MANUFACTURER Page 617 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval ROYAL ADHESIVES & SEALANTS LLC, 0000126665 800 E. ANAHEIM ST. WILMINGTON, CA US, 90744 TEL: 310 830 9904 FAX: 310 830 9908 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: EMCM 1062 ROYAL ENGINEERED COMPOSITES INC., 0000133802 1046 EAST 9TH STREET MINDEN, NE US, 68959 TEL: 308-832-2760 FAX: 514 855 5000 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-2D MECHANICAL TESTING: ADHESIVES, RESINS, SEALANTS - STATIC TESTIING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-4B TESTING OF RHEOLOGICAL PROPERTIES (VISCOSITY, FLOW, DMA, ETC.) BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 176-18 ULTRASONIC INSPECTION OF COMPOSITE COMPONENTS BAPS 188-08 MACHINING OF COMPOSITES CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 260-010 MACHINING, FORMING AND PREPARATION OF NON-METALLIC HONEYCOMB CORE FOR LAY-UP IN SANDWICH COMPONENTS Limitation: Conditional approval granted to allow supplier to manufacuture parts for FPQ. BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... Limitation: Conditional approval granted to allow supplier to manufacuture parts for FPQ. ROYELL MFG. INC., 0000108807 3817 SMITH AVE. EVERETT, WA US, 98201-4547 TEL: 425 259 9258-121 FAX: 425 252 2634 Class: A SUBCONTRACTORS Specification Controlled: BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS PPS 20.07 CONDUCTIVITY TESTING PPS 20.08 HARDNESS TESTING Specification Controlled with Limitations: Page 618 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: Limitation to the bushings/bearings filet sealing RPM MECHANICAL INC., 0000107359 2290 INDUSTRIAL ST. BURLINGTON, ON CA, L7P 1A1 TEL: 888 842 5668-223 FAX: 905-335-5843 Class: C MANUFACTURER D DISTRIBUTOR RS ELECTRONICS, 0000107360 34443 SCHOOLCRAFT ROAD LIVONIA, MI US, 48150-1316 TEL: 800 555 5312 FAX: 734 525 1184 Class: D DISTRIBUTOR RSA ENGINEERED PRODUCTS, LLC, 0000100890 110-A WEST COCHRAN STREET SIMI VALLEY, CA US, 93065 TEL: 805 584 4150- FAX: 805 584 4155 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION RSCC AEROSPACE & DEFENSE, 0000132447 680 HAYWARD ST. MANCHESTER, NH US, 03103 TEL: 603 622 3500 FAX: 603 622 8194 Class: C MANUFACTURER RSCC WIRE & CABLE LLC, 0000108353 20 BRADLEY PARK ROAD EAST GRANBY, CT US, 06026 TEL: 860-653-8402 FAX: 860-653-8301 Class: C MANUFACTURER RSI INC., 0000101476 1670 KOHLER'S CROSSING KYLE, TX US, 78640-6052 TEL: 512-262-3266 FAX: 972 960 1977 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS C MANUFACTURER D DISTRIBUTOR RSI INC., Class: 0000100562 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 369 Specification Controlled: LES 1034 SOLDERING PROCESS Page 619 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 1701 DALSHANK ST. PFLUGERVILLE, TX US, 78660-6501 TEL: 512 268 7500- FAX: 512 268 6415 C MANUFACTURER RTA IRELAND LTD., 0000136260 UNIT 2, KILKEEL BUSINESS PARK, 3 MOOR RO KILKEEL, DN GB, BT34 4NG TEL: 44 28 4176 9800 FAX: 44 28 4176 980 Class: D DISTRIBUTOR RTI ADVANCED FORMING LIMITED, 0000107967 WATCHMEAD WELWYN GARDEN CITY, HT GB, AL7 1LT TEL: 1795 415000 FAX: 1 795 415 050 Class: A SUBCONTRACTORS Scope of Approval Specification Controlled: BAPS 168-15 STRESS RELIEF OF METALS BAPS 172-34 FUSION WELDING BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 188-04 SUPERPLASTIC FORMING OF TITANIUM ALLOY-TI 6AL-4V BAPS 188-05 LASER CUTTING OF METALS PPS 01.13 LASER CUTTING TITANIUM PPS 01.36 FORMING OF TITANIUM AND TITANIUM ALLOYS PPS 20.03 PENETRANT FLAW DETECTION PPS 31.09 CLEANING OF TITANIUM PPS 42.06 CHEMICAL MILLING OF TITANIUM AND TITANIUM ALLOYSRADIOGRAPHIC INSPECTION PSPEC 231 FABRICATION OF TITANIUM AND TITANIUM ALLOYS PSPEC 300 PENETRANT FLAW DETECTION Specification Controlled with Limitations: BAPS 172-34 FUSION WELDING BAPS 186-03 CHEMICAL MILLING OF TITANIUM & TITANIUM ALLOYS Limitation: LIMITED TO CLASS 2 ONLY BAPS 188-05 LASER CUTTING OF METALS PPS 01.13 LASER CUTTING TITANIUM PPS 30.14 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS Limitation: Stress relief only. RTI INTERNATIONAL METALS INC., 1701 W. MAIN ST. WASHINGTON, MO 0000107473 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limitation to AMS4911 SHEET Page 620 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification US, 63090-1003 TEL: 636 239 7816 FAX: 636 239 3214 Learjet Approved Suppliers Scope of Approval Limitation: See EMCM-001 RTI INTERNATIONAL METALS INC., 0000123941 1000 WARREN AVE. NILES, OH US, 44446-1168 TEL: 330 652 9951 FAX: 330 544 7796 Class: C MANUFACTURER RTI INTERNATIONAL METALS LTD., 0000110249 TITAN HOUSE, KINGSBURY LINK TAMWORTH, ST GB, B78 2EX TEL: 1827 262266 FAX: 1827 262267 Class: D DISTRIBUTOR RTI REMMELE ENGINEERING INC, 0000132233 10 OLD HIGHWAY 8 S.W. PLANT 10 NEW BRIGHTON, MN US, 55112 TEL: 651 635 4100 FAX: 651 635 4168 Class: A SUBCONTRACTORS RTI-CLARO INC., 0000106874 5515 ERNEST-CORMIER LAVAL, QC CA, H7C 2S9 TEL: 450 786 2001 ... FAX: 450 661 6022 Class: A SUBCONTRACTORS Systems: 3101 BOMBARDIER AEROSPACE-AIRBUS SUBCONTRACT Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-5A CORROSION TESTING BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 138-49 APPLICATION OF BAMS 565-013 HEAT RESISTANT COATING BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-31 LOCALIZED BRUSHING PLATING Page 621 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 185-01 BARREL AND VIBRATORY FINISHING CAPTIVE LABORATORY MPS 250-301 PENETRANT INSPECTION MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS AEROSPATIALE A330/A340 PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 34.08 EPOXY PRIME Specification Controlled with Limitations: BAPS 132-03 SWAGING OF TUBES Limitation: Limitation to raw material 2024 T3WW-T-700/3 Limitation: 2.5" OD X 0.083" W Limitation: Start o.d: 2.5" Finish o.d.: 2.475" +/- 0.005" BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS Limitation: limited to Convection oven B600 Limitation: with a temperature range of 125-160 F Limitation: for BAPS 138-043 , BAPS 138-044 and BAPS 157-026 only BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limitation to Ink Marking ONLY BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: Limitation to: Limitation: > Preparation Limitation: > Faying surfaces bonds FAY-MM (ONLY) Limitation: > GND-MM Limitation: > IFF-MM Limitation: > AFA-MM BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: APPROVAL LIMITED TO MANUAL INSTALLATION ONLY Page 622 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to manual application only BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS Limitation: Titanium and Titanium Alloy BAPS 185-000 GRINDING OF STEEL PARTS Limitation: No holes grinding permitted in steel heat treated to 220-240 ksi and above . MPS 250-201 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES AEROSPATIALE A330/A340 PROGRAM PPS 20.03 PENETRANT FLAW DETECTION Limitation: To maintaining BAPS 176-002 Approval . PPS 32.01 CROMATE CONVERSION COATING Limitation: To maintaining BAPS 160-020 Approval . PPS 32.03 CHROMIC ACID ANODIZING (A1) Limitation: To maintaining BAPS 160-010 Approval . RUAG AEROSPACE, 0000122830 SEETALSTRASSE 175 EMMEN, LU CH, 6032 TEL: 268 4227 FAX: 999 9999 Class: F STRUCTURAL SUPPLIER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: BAERD-GEN-018 Approval is limited as a captive laboratory ONLY. 2101 MRB APPROVAL - MINOR ONLY Limitation: AFT Fuselage aircraft components of the CRJ 700/900 & 1000 Program Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-1C CHEM TESTING: ADHESIVES, RESINS, SEALANTS, COMPOSITE MATERIALS (FTIR, HPLC, ETC.)*** REPLACED BY 1A OR 1B ACCORDING TO APPENDIX C *** BAERD-GEN-018-2A STATIC TESTING - METALS, COMPOSITES, ADHESIVES, RESINS, SEALANTS, PLASTICS, RUBBERS, ETC. BAERD-GEN-018-2C MECHANICAL TESTING: COMPOSITE MATERIALS, STATIC TESTING *** SUPERSEDED BY 2A *** BAERD-GEN-018-4A TESTING OF PHYSICAL PROPERTIES (SPECIFIC DENSITY, WEIGHT, MOISTURE CONTENT, TGA, ETC.) BAERD-GEN-018-5A CORROSION TESTING Page 623 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAERD-GEN-018-5E EVALUATION OF PAINTS BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 138-45 APPLICATION OF CMS 565-12 CONDUCTIVE COATING TO PLASTIC SURFACES BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 160-10 CHROMIC ACID ANODIZING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 168-07 HEAT TREATMENT OF ALUMINUM & ALUMINUM ALLOYS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-17 RADIOGRAPHIC INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BAPS 186 CHEMICAL MILLING OF ALUMINUM BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... CAPTIVE LABORATORY Specification Controlled with Limitations: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT Limitation: limitation to preparation only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: No automatic riveting machine allowed RUAG AEROSPACE STRUCTURES GMBH, 0000122829 FRIEDRICHSHAFENER STRASSE 6 A GILCHING, 09 DE, 82205 TEL: 8153 30 2692 FAX: 8153 30 884532 Class: F STRUCTURAL SUPPLIER Systems with Limitations: 2101 MRB APPROVAL - MINOR ONLY Limitation: AFT Fuselage aircraft components of the CRJ 700/900 & 1000 Program Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Page 624 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Limited to Touch-up on surfaces less than 4sqin only. BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Limited to Touch-up on surfaces less than 4 sqin only. BAPS 138-49 APPLICATION OF BAMS 565-013 HEAT RESISTANT COATING Limitation: Limitation for minor repairs only. BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Limited to ''Method 1: LOCKWIRE'' Only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to ‘’Manual Riveting ONLY’’ BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to TYPE II Only (Manual Application) BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited to Type II Only (Alodine Pen 1132) BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Limitation: Limited to rework/repair by Liquid nitrogen method only. BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL Limitation: Limited to manual application only. BAPS 185-02 SHOT PEENING OF METAL PARTS Limitation: Flap Peening Repair Only in accordance with Deviation 6687 and Technique Sheet BA-S8Limitation: 001. BAPS 188-02 COLD WORKING OF HOLES Limitation: Limited to Type I : SPLIT SLEEVE COLD WORKING only RUBBER & PLASTICS PRODUCTS (NI) LTD, 30-38 DUNCRUE PLACE 0000108055 Class: C MANUFACTURER Page 625 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval BELFAST, BL GB, BT3 9BU TEL: 2890 501020 FAX: 2890 501021 RUBBERCRAFT CORP. OF CA LTD., 0000105952 3701 CONANT ST. LONG BEACH, CA US, 90808 TEL: 562 354 2800-... FAX: 562 354 2900 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER RUBBERITE CORP., 0000108682 301 E.COETZ AVE. SANTA ANA, CA US, 92707 TEL: (714) 546-6464 FAX: (714) 546-6747 Class: C MANUFACTURER RUBBERLITE INC., 0000107361 2501 GUYAN AVE. HUNTINGTON, WV US, 25703-1236 TEL: 304 525 3116 FAX: 304 523 4316 Class: C MANUFACTURER RUDD MACNAMARA LTD., 0000109945 ISLAND WORKS HOLYHEAD ROAD HANDSWORTH BIRMINGHAM WEST, WM GB, B21 0BS TEL: 0121 523 8437 FAX: 0121 551 7032 Class: C MANUFACTURER RUDOLF WULFMEYER AIRCRAFT, 0000109031 FRANKENRING 15 LANGENHAGEN, 03 DE, 30855 TEL: 511 740 7624 FAX: 511 740 7666 Class: C MANUFACTURER RWG FRANKENJURA - INDUSTRIE,, 0000131506 GARTENHAUSER WEG 19 DACHSBACH, 09 DE, 91462 TEL: 514 855 5000 FAX: 514 855 5000 Class: C MANUFACTURER S&K AEROSPACE CO. LTD., Class: 0000127844 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: PART NO. N773-8061 (1020015) only (Was P/N: N773-8053 (1160015)) Specification Controlled: Page 626 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 900 YUCHEON-RI, SANAM-MYUN SACHEON-CITY, 11 KR, 664-942 TEL: 55 855 2300 FAX: 55 855 2306 A SUBCONTRACTORS S-FASTENERS GMBH, 0000134815 IM UNTEREN RIED 7 ALTHENGSTETT, 07 DE, 75382 TEL: 49 70 51 92 4... FAX: 49 70 51 92 4 Class: B EQUIPMENT SUPPLIERS S-TEC CORP., 0000102105 1 S-TEC WAY MINERAL WELLS, TX US, 76067-9236 TEL: 940 325 9406 FAX: 940 325 3904 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval FF2R818K & EASA dual approval EASA.145.4842. S. J. LIPKINS INC., 0000111060 855 A CONKLIN ST. FARMINGDALE, NY US, 11735-2409 TEL: 631 249 8866 FAX: 631 249 8877 Class: A SUBCONTRACTORS S.C. CHEMICAL COMPANY S.A., 0000135561 B-DUL CHIMIEI, NR. 14 JUD. LASI, 25 RO, 0700293 TEL: 04 232 214 267 FAX: 04 232 239 170 Class: C MANUFACTURER SAAB AEROTECH, 0000108834 SE-611 27 NYKOPING, 013 SE, 611 00 TEL: 1557 7100 FAX: 155 21 29 40 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: EASA approval SE.145.002 & FAA Repair Station dual approval AY52744M. SABIC INNOVATIVE PLASTICS US, Class: 0000106824 PPS PPS PPS PPS PPS PPS PPS PPS 20.03 31.02 31.07 32.02 32.03 34.03 34.08 34.41 PENETRANT FLAW DETECTION CLEANING PROCESSES OF ALUMINUM CLEANING AND STRIPPING OF PAINTED SURFACES MANUAL APPLICATION OF CHEMICAL CONVERSION COATINGS CHROMIC ACID ANODIZING (A1) APPLICATION OF POLYURETHANE ENAMEL (F24 & F37) EPOXY PRIME APPLICATION OF EPOXY-POLYAMIDE ENAMEL (F22) Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to bonding of countertop finish Page 627 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 1665 55TH AVE. DORVAL, QC CA, H9P 2W4 TEL: 514 422 1048 FAX: 514 422 1055 D DISTRIBUTOR SABIC INNOVATIVE PLASTICS US LLC., 0000103767 1 LEXAN LANE MOUNT VERNON, IN US, 47620-9367 TEL: 812 831 7186 FAX: 812 831 4096 Class: C MANUFACTURER SABIC INNOVATIVE PLASTICS US LLC., 0000108386 44 NORMAR ROAD COBOURG, ON CA, K9A 4L7 TEL: 704 992 5075 FAX: 866 585 2386 Class: C MANUFACTURER SABIC POLYMERSHAPES, 0000107726 9150 AIRPORT ROAD BRAMPTON, ON CA, L6S 6G1 TEL: 514 422 1048 FAX: 905 789 3131 Class: A SUBCONTRACTORS D DISTRIBUTOR SABRELINER AVIATION, LLC, 0000116319 1390 HWY. H PERRYVILLE, MO US, 63775-7319 TEL: 573 543 2212- FAX: 573 543 2044 Class: Systems with Limitations: A SUBCONTRACTORS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 176-04 MAGNETIC PARTICLE INSPECTION Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Specification Controlled with Limitations: BAPS 172-34 FUSION WELDING Limitation: Limitation to Group IIB Stainless Steel (17-7PH) Limitation: Limitation to Group IV Class C weld only , for INTERIORS ONLY Page 628 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 260-03 POTTING OF HONEYCOMB SANDWICH PANELS Limitation: Limitation to P/N 412525-29-103 ONLY SAC COMMERCIAL AIRCRAFT INTERNATION, A03 SHOP, NO.72 GUTAINAN VILLAGE SHENYANG, 070 CN, 110169 TEL: 514 855 5000 FAX: 514 855 5000 0000132575 Class: F STRUCTURAL SUPPLIER Specification Controlled: BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT BAPS 150-003 INSTALLATION OF SAFETYING DEVICES BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 157-30 APPLICATION OF HIGH TEMPERATURE (FIRE WALL) SEALANT BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS Specification Controlled with Limitations: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Touch-up application only BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Touch-up application only BAPS 150-003 INSTALLATION OF SAFETYING DEVICES Limitation: Safety Tying-Lock Wire & Safety Cables, Cotter Pin BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: Limited to the installation of rivets not requiring heat treatment or refregation and automatic riveting maching to Drivematic G2000 s/n 1378 BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 2 Manual Application, in A03 Facility BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Type 2 Manual Applicatio for BAPS 145-002, in A03 Facility BAPS 174-09 INSTALLATION OF WIGGINS TYPE COUPLINGS ON RIGID PLUMBING LINES Limitation: Limited to assembly of couplings on to pre swaged ferrules per section 9.3.3 requirements Page 629 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval SAERTEX GMBH & CO KG, 0000123741 BROCHTERBECKER DAMM 52 SAERBECK, 05 DE, 48369 TEL: 2574 9020 FAX: 2574 902209 Class: C MANUFACTURER SAF INDUSTRIES LLC, 0000104477 106 EVANSVILLE AVENUE MERIDEN, CT US, 06451 TEL: 203 721 6252 FAX: 203-721-6261 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION SAF-T-LOK CHEM CORP., 0000108369 300 EISENHOWER LANE N. LOMBARD, IL US, 60148-5405 TEL: 1800-222-2087 FAX: 630 495 8813 Class: C MANUFACTURER SAFE FLIGHT INSTRUMENT CORP., 0000101997 20 NEW KING ST. WHITE PLAINS, NY US, 10604-1204 TEL: 914-220-1175 FAX: 914 946 7882 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA Repair Station approval QA1R419K & EASA dual approval EASA.145.4845. SAFEAIR MEDIA, 0000102004 320 ANDOVER PARK E., SUITE 100 SEATTLE, WA US, 98188 TEL: 425-264-0345 FAX: 425-264-0353 Class: C MANUFACTURER SAFETECH INC., 0000116366 2839 NAGLE DALLAS, TX US, 75220-4529 TEL: 214 902 9696 FAX: 214 902 9239 Class: Systems with Limitations: E MAINTENANCE ORGANIZATION 0000 GENERAL LIMITATION / REMARKS Limitation: In accordance with FAA Repair Station Approval # SMER451X SAFRAN ELECTRICAL & POWER, 0000106845 1 RUE LOUIS BLERIOT, PARC D'ACTIVITIE D' BLAGNAC, 31 FR, 80049 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 630 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval TEL: 5 62 87 09 14 FAX: 05 34 60 06 99 SAFRAN ELECTRONICS CANADA INC., 0000100678 2000 FISHER DR. PETERBOROUGH, ON CA, K9J 7B1 TEL: 705 743 6903-251 FAX: 705 745 1394 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Canadian AMO Approval 154-92 & EASA dual Approval EASA 145.7096 SAFRAN LANDING SYSTEMS (SAS), 0000129298 INOVEL PARC SUD 7, RUE GENERAL VALERIE A VELIZY-VILLACOUBLAY, 78 FR, 78140 TEL: 404 305 2626 FAX: 905-683-3946 Class: C MANUFACTURER SAFRAN POWER UK LTD., 0000109151 WESTFIELD ROAD PITSTONE, BU GB, LU7 9GT TEL: 330 487 2069-USA FAX: 1296 663 300 Class: B EQUIPMENT SUPPLIERS E MAINTENANCE ORGANIZATION SAFT AMERICA INC., 0000101220 711 GIL HARBIN INDUSTRIAL VALDOSTA, GA US, 31601-6512 TEL: 229 245 3008 FAX: 229 245 2890 Class: B EQUIPMENT SUPPLIERS SAGEM AVIONICS, 0000103725 3184 PULLMAN ST. COSTA MESA, CA US, 92626-3319 TEL: 949 722 4451 FAX: 917 464 6428 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER E MAINTENANCE ORGANIZATION SAGEM AVIONICS INC., 0000103854 2802 SAFRAN DR. GRAND PRAIRIE, TX US, 75052-8187 TEL: 972-314-3600 FAX: 972 314 3641 Class: E MAINTENANCE ORGANIZATION SAGEM DEFENSE SECURITE, 0000106774 15 A 19 RUE LOUISE-MICHEL MANTES LA VILLE, 78 Class: B EQUIPMENT SUPPLIERS Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: FAA Repair station approval E7AR565J & EASA approval EASA .145.5305 Page 631 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval FR, 78711 TEL: 158 119279 FAX: 1581 19408 SAGEM DEFENSE SECURITE, 0000107382 178 RUE DE PARIS MASSY, 91 FR, 91344 TEL: 33158119281 FAX: 33158119408 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: In accordance with DGAC Approved Maintenance Organization # FR.145.181 Limitation: In accordance with FAA Approved Repair Station # U87Y442Y SAGER ELECTRONICS, 0000107364 19 LEONA DR. MIDDLEBORO, MA US, 02346-1404 TEL: 508 947 8888 FAX: 508 947 0869 Class: D DISTRIBUTOR SAIA-BURGESS INC., 0000101043 801 SCHOLZ DR. VANDALIA, OH US, 45377-3121 TEL: 937 454 2396 FAX: 937 898 8624 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER SAINT TECHNOLOGIES INC., 0000107365 10 LOCUST N. SHANNON, IL US, 61078-9009 TEL: 815 864 3035 FAX: 815 864 3134 Class: C MANUFACTURER SAINT-GOBAIN ADFORS CANADA LTD., 0000107709 201 HUGEL AVE. MIDLAND, ON CA, L4R 4G1 TEL: 705-526-7867 FAX: 705-528-2801 Class: C MANUFACTURER SAINT-GOBAIN PERFORMANCE PLASTICS F, 0000136659 LA MOTHE-AUX-AULNAIES CHARNY, 89 FR, 89120 TEL: 33 03 86 63 7... FAX: 514 855 5000 Class: D DISTRIBUTOR Page 632 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address SAKURA RUBBER CO. LTD., 0000119036 799 MIDORI OHTAWARA, 09 JP, 3240045 TEL: 81 28 728 1121 FAX: 81 28 728 1698 Classification Class: A SUBCONTRACTORS C MANUFACTURER Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: See EMCM mnf code 1147 Specification Controlled: BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAERD-GEN-018-5A CORROSION TESTING BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 174-08 ASSEMBLY AND INSTALLATION OF FLARELESS FITTINGS ON PLUMBING LINES BAPS 174-16 ASSEMBLY AND INSTALLATION OF SIERRACIN/HARRISON SLEEVES AND UNIONS ON PLUMBING LINES BAPS 180-001 ALKALINE CLEANING BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY PPS 31.02 CLEANING PROCESSES OF ALUMINUM PPS 32.01 CROMATE CONVERSION COATING Specification Controlled with Limitations: BAERD-GEN-018-2B METALS - DYNAMIC AND CYCLIC TESTING Limitation: to Pressure Testing ONLY . SAMTEC, 0000108616 520 PARK E. BLVD. NEW ALBANY, IN US, 47150-7251 TEL: 812 944 6733 FAX: 812 948 5047 Class: C MANUFACTURER SAMTEC INC, 0000133300 520 PARK EAST BLVD Class: C MANUFACTURER Page 633 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval NEW ALBANY, IN US, 47150 TEL: 812 944 6733 FAX: 812 948 5047 SAMTEC PANAMA, 0000133452 BLDG 7, UNIT 2, A STREET PANAMA CITY, PA PA, * TEL: 812 944 6733 FAX: 812 948 5047 Class: C MANUFACTURER SAN-TRON, 0000111023 4 NEWBURYPORT TPKE. IPSWICH, MA US, 01938-1024 TEL: 978 356 1585 FAX: 978 356 1573 Class: C MANUFACTURER SANDEN INTERNATIONAL INC., 0000101221 601 S. SANDEN BLVD. WYLIE, TX US, 75098-4999 TEL: 972 442 8661 FAX: 972 442 8936 Class: C MANUFACTURER SANDSTROM PRODUCTS CO., 0000107366 224 MAIN ST. PORT BYRON, IL US, 61275-9501 TEL: 800 747 1084 FAX: 309 523 3912 Class: C MANUFACTURER SANDVIK SAS, 0000123562 10 RUE DE L'INDUSTRIE CHAROST, 18 FR, 18290 TEL: 02482 62012 FAX: 02482 63042 Class: C MANUFACTURER SANDVIK SPECIAL METALS CORP., 0000108472 235407 E. SR 397 KENNEWICK, WA US, 99337-7745 TEL: 509-734-3937 FAX: 509-582-3552 Class: C MANUFACTURER SANITATION EQUIPMENT LIMITED, Class: 0000136510 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 634 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 97 MAIN STREET, W202 EDWARDS, CO US, 81632 TEL: 970 569 2276 FAX: 970 766 2172 H COMMERCIAL OFF THE SHELF SANLO MFG. CO., 0000108597 400 STATE HWY. 212 MICHIGAN CITY, IN US, 46360-2821 TEL: 219 879 0241 FAX: 219 879 5628 Class: C MANUFACTURER SANYU INDUSTRIES LTD., 0000108143 1360 FUNATU, AICHI-KEN KOMAKI, 23 JP, 9999999 TEL: 568 723169 FAX: 568 723161 Class: A SUBCONTRACTORS Specification Controlled: BAPS 145-003 INSTALLATION OF AIRCRAFT WIRING BAPS 145-004 INSTALLATION OF MECHANICALLY ATTACHED TERMINALS BAPS 145-006 TERMINATION OF THE SHIELD ON SHIELD ON SHIELDED WIRE AND CABLE BAPS 145-008 STOWAGE OF ELECTRICAL WIRING AND CONNECTORS MPS 145-25 CERTIFICATION OF CRIMPING TOOL OPERATORS Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: limited to EMCM -001 Product Limitation: limited to EMCM -001 Product Limitation: AMS-QQ-A-200/8 6061 ALuminum Alloy Product Profile T-10963 for GCC Only SAPA INDUSTRIAL EXTRUSIONS, 0000106905 53 POTTSVILLE CRESSONA, PA US, 17929-1217 TEL: 570 385 5000 FAX: 570 385 8885 Class: C MANUFACTURER Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM # 596 SARGENT AEROSPACE CANADA INC., 0000106759 8121 JARRY E. ANJOU, QC CA, H1J 1H6 TEL: 514-352-9425-... FAX: 514 352 9820 Class: A SUBCONTRACTORS Specification Controlled: BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS SAPA EXTRUSIONS NORTH AMERICA, TDA, 2001 KOTOBUKI WAY VANCOUVER, WA US, 98660 TEL: 503 775 6791 FAX: 503 775 1614 0000107444 Specification Controlled with Limitations: BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation: Limited to paint touch up only Page 635 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING Limitation: Limited to paint touch only BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS Limitation: MANUAL INSTALLATION ONLY BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING Limitation: LIMITED TO P/N CC670-16010, CC670-16021, CC670-16031, CC670-16040, CC670-16050, CC670-16053, CC670-16070, CC670-16071, CC670-16080, CC670-16090, CC670-1 BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: TYPE II MANUAL APPLICATION ONLY BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: TYPE II MANUAL APPLICATION ONLY SARGENT CONTROLS & AEROSPACE, 0000102055 5675 W. BURLINGAME ROAD TUCSON, AZ US, 85743-9453 TEL: 520 744 1000 FAX: 520 744 9290 Class: C MANUFACTURER SATAIR A/S, 0000108841 AMAGER LANDEVEJ 147A KASTRUP, 006 DK, 2770 TEL: 3247 0100 FAX: 3251 3434 Class: D DISTRIBUTOR SATAIR USA INC., 0000101899 4301 N. W. 36TH ST. MIAMI SPRINGS, FL US, 33166-7302 TEL: 404 675 6322 FAX: 404 675 6311 Class: C MANUFACTURER D DISTRIBUTOR SATAIR USA INC., 0000110542 3993 TRADEPORT BLVD. ATLANTA, GA US, 30354-3731 TEL: 404 675 6322 FAX: 404 675 6311 Class: D DISTRIBUTOR SATCOM DIRECT INC., 1901 HIGHWAY A1A Class: H COMMERCIAL OFF THE SHELF 0000132597 Page 636 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval SATELLITE BEACH, FL US, 32937 TEL: 321 525 4623 FAX: 321 777 3702 SATORI AIR SERVICES INC., 0000107925 4105 COUSENS ST-LAURENT, QC CA, H4S 1V6 TEL: 514 745 1600-233 FAX: 514 745 2711 Class: E MAINTENANCE ORGANIZATION SATURN FASTENERS INC., 0000100576 425 VARNEY ST. S. BURBANK, CA US, 91502-2125 TEL: 818 846 7145 FAX: 818 846 0003 Class: A SUBCONTRACTORS C MANUFACTURER SAUEREISEN, 0000108480 160 GAMMA DR. PITTSBURGH, PA US, 15238-2989 TEL: 412 963 0303 FAX: 412 963 7620 Class: C MANUFACTURER SAYWELL INTERNATIONAL LTD., 0000101690 AVIATION CENTRE WORTHING, SW GB, BN14 9LA TEL: 190 370 4943 FAX: 1903 705701 Class: B EQUIPMENT SUPPLIERS SAYWELL INTL. LTD., 0000102647 3700 N. 29TH AVE., SUITE 101 HOLLYWOOD, FL US, 33020-1019 TEL: 250 474 6370 FAX: 250 474 2157 Class: D DISTRIBUTOR SCHATZ BEARING CORP., 0000110782 10 FAIRVIEW AVE. POUGHKEEPSIE, NY US, 12601 TEL: 845 452 6000-... FAX: 845 452 1660 Class: C MANUFACTURER SCHIVO NORTHERN IRELAND, Class: 0000136640 Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Specification Controlled: Page 637 SAP EXTRACT DATED: Learjet Approved Suppliers Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Scope of Approval 11 CARRAKEEL DRIVE MAYDOWN CAMPSIE, LD GB, BT47 6UQ TEL: 442871860531 FAX: 514 855 5000 A SUBCONTRACTORS BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS PSPEC 905 INSTALLATION & SEALING OF INTERFERENCE FIT BUSHES SCHIVO PRECISION LIMITED, 0000130952 IDA INDUSTRIAL ESTATE, CORK ROAD WATERFORD, WF IE, 0 TEL: 353 513 72010 FAX: 353 513 72010 Class: A SUBCONTRACTORS Specification Controlled: BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING SCHLEGEL SYSTEMS INC., 0000100195 1555 JEFFERSON ROAD ROCHESTER, NY US, 14623-3109 TEL: 585 427 7200 FAX: 585 427 7216 Class: H COMMERCIAL OFF THE SHELF SCHLOSSER FORGE CO., 0000109828 11711 ARROW ROUTE CUCAMONGA, CA US, 91730-4902 TEL: 909 483 2200 FAX: 909 483 2291 Class: C MANUFACTURER SCHNELLER LLC, 0000104555 6019 POWDERMILL ROAD KENT, OH US, 44240-7109 TEL: 330 676 7130 FAX: 330 673 6374 Class: A SUBCONTRACTORS B EQUIPMENT SUPPLIERS C MANUFACTURER SCHRADER S.A., 0000109662 48 RUE DE SALINS PONTARLIER, 25 FR, 25300 TEL: +33(0)381 38 ... FAX: 3 8146 4142 Class: C MANUFACTURER SCI TECHNOLOGY INC., 0000108519 13000 S. MEMORIAL PKWY. HUNTSVILLE, AL Class: C MANUFACTURER Specification Controlled with Limitations: BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS Limitation: Limited for Type 2 Alodine 1132 Pen Only. Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: SEE EMCM Page 638 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval US, 35803-6000 TEL: 256 882 4800 FAX: 256 882 4581 SCIENTIFIC DEVELOPMENTS, INC., 0000107371 175 DANEBO AVE. S. EUGENE, OR US, 97402-9373 TEL: 541 686 9844 FAX: 541 485 8990 Class: H COMMERCIAL OFF THE SHELF SCOTT GROUP CUSTOM CARPETS INC., 0000101944 3232 KRAFT AVE. S. E., SUITE A GRAND RAPIDS, MI US, 49512-2040 TEL: 616 954 3200-292 FAX: 616 954 9600 Class: C MANUFACTURER SEA WIRE & CABLE INC., 0000105067 451 LANIER ROAD MADISON, AL US, 35758-1865 TEL: 256-772-9616-220 FAX: 256-327-0260 Class: D DISTRIBUTOR SEAL CO., 0000101277 1558 NORTH , 107TH EAST AVE. TULSA, OK US, 74116-1512 TEL: 918 836 0441 FAX: 918 836 5169 Class: D DISTRIBUTOR SEAL DYNAMICS, 0000101448 600 PRIME PLACE HAUPPAUGE, NY US, 11788-5301 TEL: 631-299-2133 FAX: 631 667 4030 Class: D DISTRIBUTOR SEALING DEVICES INC., 0000107374 4400 WALDEN AVE. LANCASTER, NY US, 14086-9716 TEL: 716 651 2398 FAX: 716 684 0760 Class: C MANUFACTURER D DISTRIBUTOR SEALTH AERO MARINE, 0000103299 16001 MILL CREEK BLVD. S. E. Class: C MANUFACTURER Page 639 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval MILL CREEK, WA US, 98012-1542 TEL: 425 481 0727-200 FAX: 425 338 0822 SEASTROM MFG. CO. INC., 0000101144 456 SEASTROM ST. TWIN FALLS, ID US, 83301-8526 TEL: 1 800 634 2356 FAX: 208 734 7222 Class: C MANUFACTURER SECAN HONEYWELL GROUP, 0000126070 REPAIR STATION, 18 BLVD. DE L'INDUSTRIE VENDOME, 41 FR, 41100 TEL: 2 54 77 71 05 FAX: 2 54 72 25 09 Class: E MAINTENANCE ORGANIZATION SECO SEALS INC., 0000101376 1370 LOGAN AVE., UNIT K COSTA MESA, CA US, 92626 TEL: 714 546 3478 FAX: 714 546 3106 Class: C MANUFACTURER SECOA B V, 0000108058 BUNSENSTRAAT 21 DORDRECHT, 12 NL, 3316 GC TEL: 786 51 4400 FAX: 786 51 5191 Class: D DISTRIBUTOR SECURAPLANE TECHNOLOGIES INC., 0000102044 12350 N VISTOSO PARK ROAD ORO VALLEY, AZ US, 85755 TEL: 520 297 0844 FAX: 520-425-8257 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: FAA accreditation # SR0R383N Limitation: EASE accreditation# EASA.145.5074 SECURE COMPONENTS, 0000133747 1000 EAST MAIN STREET NORRISTOWN, PA US, 19401 TEL: 484 660 1180 FAX: 484-356-1298 Class: D DISTRIBUTOR SEDO CHEMICALS NEOPRENE GMBH, Class: 0000122538 Page 640 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification TRANKEWEG 18A FUERSTENWALDE, 12 DE, 15517 TEL: 033 6159 6523 FAX: 033 6159 6511 D DISTRIBUTOR SEGULA MANUFACTURING ST-NAZAIRE, 0000125572 BLVD. DES APPRENTIS MONTOIR DE BRETAGNE, 44 FR, 44550 TEL: 02 40 91 58 38 FAX: 02 40 91 52 09 Class: A SUBCONTRACTORS SEKISUI-SPI, 0000108244 6685 LOW ST. BLOOMBURG, PA US, 17815-8613 TEL: 570 387 6997 FAX: 570 387 8722 Class: C MANUFACTURER SELBY FURNITURE HARDWARE CO. INC., 0000103474 321 RIDER AVE. BRONX, NY US, 10451-6007 TEL: 718-993-3700 FAX: 718 993 3143 Class: H COMMERCIAL OFF THE SHELF SELL GMBH, 0000107926 DR. SIEGFRIED HERBORN, 06 DE, 35745 TEL: 49 2772 707 1... FAX: 2772 707-552 Class: B EQUIPMENT SUPPLIERS SEMCO INSTRUMENTS INC., 0000103949 25700 RYE CANYON ROAD VALENCIA, CA US, 91355 TEL: 661-257-2000 FAX: 203-238-9541 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER SEMTECH, 0000123274 CARRETERA A MATAMOROS Y BRECHA E-99 REYNOSA, TMS MX, 88780 TEL: 899 958 0398 FAX: 899 958 0402 Class: C MANUFACTURER Learjet Approved Suppliers Scope of Approval Systems with Limitations: 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to perform out located works at Airbus facilities. Page 641 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval SENASYS INC., 0000110852 704 BARTLETT AVE. ALTOONA, WI US, 54720-2802 TEL: 715 831 6353 FAX: 419 818 0897 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER SENIOR AEROSPACE, 0000101602 1075 PROVIDENCE HWY. SHARON, MA US, 02067-1671 TEL: 781 302-1206 FAX: 781 784 1405 Class: Systems with Limitations: B EQUIPMENT SUPPLIERS 0000 GENERAL LIMITATION / REMARKS E MAINTENANCE ORGANIZATION Limitation: Classification B – Equipment supplier for parts under your design authority and Limitation: Classification E – Service Provider for the maintenance activities on components intended for Limitation: the Learjet programs as approved by the FAA Repair Station certificate number M6XR959N Limitation: and EASA certificate number EASA.145.5182. SENIOR AEROSPACE BIRD BELLOWS, 0000109907 RADNOR PARK ESTATE CONGLETON, AT GB, CW12 4UQ TEL: 01260 271411 FAX: 01260 270910 Class: B EQUIPMENT SUPPLIERS SENIOR AEROSPACE BWT, 0000109140 ADLINGTON INDUSTRIAL ESTATE MACCLESFIELD, CH GB, SK10 4NL TEL: 1625 870723 FAX: 1625 879 472 Class: B EQUIPMENT SUPPLIERS SENIOR AEROSPACE COMPOSITES, 0000100003 2700 CUSTER S. WICHITA, KS US, 67217-1356 TEL: 316-942-3208-156 FAX: 316-942-3238 Class: A SUBCONTRACTORS Specification Controlled: BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER BAPS 138-44 APPL'N OF FLUID RESISTANT POLYURETHANE COATING BAPS 188-08 MACHINING OF COMPOSITES BAPS 260-01 FABRICATION OF 250°F CURE GLASS, ARAMID, GRAPHITE EPOXY LAMINATES AND SANDWICH COMPONENTS BAPS 260-013 FABRICATION OF 250 DEGREE F-300 DEGREE F(121 DEGREE C-149 DEGREE C)CURE STRUCTURAL COMPOSITE LAMINATES AND SANDWICH COMPONENTS BAPS 260-02 FABRICATION OF 350 F CURE GLASS, ARAMID... Page 642 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification Learjet Approved Suppliers Scope of Approval Specification Controlled with Limitations: BAPS 188-07 DRILLING OF COMPOSITE AND COMPOSITE/METALLIC ASSEMBLIES Limitation: Limited to Drilling Holes Only. BAPS 260-010 MACHINING, FORMING AND PREPARATION OF NON-METALLIC HONEYCOMB CORE FOR LAY-UP IN SANDWICH COMPONENTS Limitation: Limited to Drying of Core Only. SENIOR AEROSPACE ERMETO Z.A., 0000128639 8 RUE DU CLOS THOMAS FOSSE, 41 FR, 41330 TEL: 02 54 33 50 88 FAX: 02 54 33 03 68 Class: A SUBCONTRACTORS SENIOR AEROSPACE KETEMA, 0000102075 790 GREENFIELD DR. EL CAJON, CA US, 92021-3101 TEL: 619 588 3373 FAX: 619 588 3381 Class: B EQUIPMENT SUPPLIERS SENIOR AEROSPACE SSP, 0000100607 2980 N. SAN FERNANDO BLVD. BURBANK, CA US, 91504-2522 TEL: 818-260-2243 FAX: 818-260-2251 Class: B EQUIPMENT SUPPLIERS SENIOR AEROSPACE THERMAL ENGINEERIN, ORCHARD ROAD ROYSTON, HT GB, SG8 5JZ 0000108070 Class: A SUBCONTRACTORS Specification Controlled: BAERD-GEN-018-3A METALLOGRAPHIC EXAMINATION OF FERROUS ALLOYS AND METALLIC COATINGS BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS BAERD-GEN-018-3C METALLOGRAPHIC EVALUATION OF TITANIUM ALLOYS BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) BAPS 174-02 FABRICATION OF PLUMBING LINES BAPS 174-17 ASSEMBLY AND INSTALLATION OF DEUTSCH PERMASWAGE FITTING ON PLUMBING LINES CAPTIVE LABORATORY Specification Controlled: BAPS 176-02 FLUORESCENT PENETRANT INSPECTION BAPS 180-001 ALKALINE CLEANING BAPS 180-040 AQUEOUS DEGREASING Page 643 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification TEL: 1763 242067-255 FAX: 1763 245959 Learjet Approved Suppliers Scope of Approval BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS PPS 01.36 FORMING OF TITANIUM AND TITANIUM ALLOYS PPS 20.03 PENETRANT FLAW DETECTION PPS 31.09 CLEANING OF TITANIUM PPS 31.12 CLEANING NICKEL AND NICKEL ALLOYS PSPEC 300 PENETRANT FLAW DETECTION Specification Controlled with Limitations: BAPS 144-005 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) Limitation: Limited to electro chemical etch. BAPS 188-05 LASER CUTTING OF METALS PSPEC 420 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS SENIOR FLEXONICS CANADA, 0000122807 134 NELSON ST. W. BRAMPTON, ON CA, L6X 1C9 TEL: 905-451-1250 FAX: 905-451-1315 Class: C MANUFACTURER SENNHEISER CANADA, 0000107378 221 LABROSSE AVE. POINTE-CLAIRE, QC CA, H9R 1A3 TEL: 514 426 3013 FAX: 514 426 3953 Class: Systems with Limitations: H COMMERCIAL OFF THE SHELF 0000 GENERAL LIMITATION / REMARKS Limitation: Limited to Commercial off the shelf goods SENSATA TECHNOLOGIES (KAVLICO), 0000106248 1461 LAWRENCE DRIVE THOUSAND OAKS, CA US, 91320 TEL: 248 465 0825 FAX: 805 531 6510 Class: C MANUFACTURER SENSATA TECHNOLOGIES INC., 0000101271 529 PLEASANT ST. ATTLEBORO, MA US, 02703-2421 TEL: 508 236 3525 FAX: 508 236 1598 Class: B EQUIPMENT SUPPLIERS C MANUFACTURER SENSOR SYSTEMS INC., Class: 0000101100 Page 644 SAP EXTRACT DATED: Monday, October 3, 2016 Supplier Name / SAP Code / Address Classification 8929 FULLBRIGHT AVE. CHATSWORTH, CA US, 91311-6124 TEL: 818 3
Similar documents
Interturbine Aviation Logistics
Japan, Singapore, India, Australia and South Africa ensuring a quick service for fastest material availability.
More information