Robit DTH Hammers Catalogue

DTH HAMMERS
Vikkiniityntie 9, 33880 Lempäälä . Puh: (03) 3140 3400 . E-mail: [email protected] . Web: www.robit.fi
HAMMER 10”
DTH HAMMER 10”
N120
The Robit® X N120 hammer is designed to
operate over a wide range of operating air
pressures. A 6⅝” API reg. pin backhead is
supplied as standard.
The Robit® X N120 is fitted with a positive
seating water check valve and is supplied
as standard fitted with a solid choke.
The Robit® X N120 is designed to accept
button bits with a shank identical to the
Sandvik Mission SD10. However, the Robit®
X N120 can be supplied to accept the Numa
100 type of button bit.
Robit® X N120 Valveless Hammer 10”
for 254 mm (10”) - 305 mm (12”) diameter holes
Component parts
RefDescription
Part Number
1
1
Backhead 6⅝” reg. Pin
HSH1013880M
2
2
Check Valve
HSH10108
3
Check Valve Spring
HSH10110
4
Diverter
HSH10120
5
Compression Buffer
HSH10128
6
Control Tube Holder
HSH10131
7
Control Tube Buffers (2)
HSH10129
8
Control Tube
HSH10130
9
Piston
HSH10103046
10
Wearsleeve
HSH10100
11 Piston Retaining Ring
HSH10132
12 Bit Retainer Rings
HSH0137046
13
Bit Retainer ‘O’ Ring
HSH10137A046
14 Chuck
HSH10135046
15 Breakout Washer (2)
HSH10126
Complete Hammer
15
3
4
5
7
6
8
BR101H01
9
Hammer specifications
English
Metric
Weight (less bit)
745 Ibs
338 kgs
Length (less bit)
62”
1575 mm
Outside dia.
8.860”
225 mm
Bore dia.
6.840”
175 mm
Piston weight
150 Ibs
68 kg
Stroke
5”
127 mm
Air consumption
PSI
BAR
C.F.M.
Cu. Mtr / min.
100
7
365
10.3
150
10.3
671
19.0
200
13.8
1034
29.3
250
17.2
1445
40.9
10
11
12
15
13
14
HAMMER 12”
DTH HAMMER 12”
N120
The Robit® XII N120 hammer is designed to
operate over a wide range of operating air
pressures. A 6⅝” API reg. pin backhead is
supplied as standard.
The Robit® XII N120 is fitted with a positive
seating water check valve and is supplied
as standard fitted with a solid choke.
In addition to the standard N120 button
bit, the hammer can easily be modified to
accept button bits with Mission SD12 and
Ingersoll Rand DHD112 shank design.
Robit® XII N120 Valveless Hammer 12”
for 302 mm (11⅞”) - 445 mm (17½”) diameter holes
Component parts
Ref
Description
Part Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Backhead 6⅝” reg. Pin
Backhead / Chuck ‘O’ Ring
Check Valve
Check Valve Spring
Diverter
Compression Buffer
Control Tube Holder
Control Tube Buffers (2)
Control Tube ‘O’ Ring
Control Tube
Piston
Wearsleeve
Piston Retaining Rings (2)
Bit Bearing
Bit Retainer (pair)
Bit Retainer ‘O’ Ring
Chuck
Chuck Bearing
Breakout Washer backhead
Breakout Washer chuck
Complete Hammer
HSH1213880M
HSH12114
HSH12108
HSH12110
HSH12120
HSH12128
HSH12131
HSH12129
HSH12130A
HSH12130
HSH12103050
HSH12100
HSH12132
HSH12187
HSH12137050
HSH12137AST
HSH12135050
HSH12135050BE
HSH12126
HSH12125
BR121H01
19
1
2
3
4
5
6
8
7
9
10
11
Hammer specifications
English
Metric
Weight (less bit)
1487 Ibs
675 kgs
Length (less bit)
74.39”
1889 mm
Outside dia.
10.7”
272 mm
Bore dia.
8.5”
216 mm
Piston weight
275 Ibs
125 kg
Stroke
5”
127 mm
12
14
15
Air consumption
PSI
BAR
C.F.M.
Cu. Mtr / min.
100
7
592
16.8
150
10.3
1087
30.8
200
13.8
1674
47.4
250
17.2
2338
66.2
17
13
16
20
18
HAMMER 12”
DTH HAMMER 12”
SD12
The Robit® XII SD12 hammer is designed to
operate over a wide range of operating air
pressures. A 6⅝” API reg. pin backhead is
supplied as standard.
The Robit® XII SD12 is fitted with a positive
seating water check valve and is supplied
as standard fitted with a solid choke.
In addition to using Mission SD12 button
bits, the hammer can easily be modified to
accept button bits of N120 and IR DHD112
shank design.
Robit® XII SD12 Valveless Hammer 12”
for 302 mm (11⅞”) - 445 mm (17½”) diameter holes
1
Component parts
Ref
Description
Part Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Backhead 6⅝” reg. Pin
Backhead ‘O’ Ring
Check Valve
Check Valve Spring
Diverter
Compression Buffer
Tube Holder
Tube Buffers (2)
Control Tube ‘O’ Ring
Control Tube
Piston
Wearsleeve
Piston Retaining Ring
Bit Retaining Ring
Bit Retainer ‘O’ Ring (2)
Chuck
Chuck Breakout Washer
Backhead Breakout Washer
Complete Hammer
HSH1213880M
HSH12114
HSH12108
HSH12110
HSH12107
HSH12128
HSH12131
HSH12129
HSH12130A
HSH12130
HSH12103048
HSH12100
HSH12132
HSH12137048
HSH12137AST
HSH12135048
HSH12126
HSH12125
BR121H03
3
4
18
2
5
6
8
7
9
10
11
Hammer specifications
English
Metric
Weight (less bit)
1487 Ibs
675 kgs
Length (less bit)
75.17”
1909 mm
Outside dia.
10.7”
272 mm
Bore dia.
8.5”
216 mm
Piston weight
275 Ibs
125 kg
Stroke
5”
127 mm
Air consumption
PSI
BAR
C.F.M.
Cu. Mtr / min.
100
7
592
16.8
150
10.3
1087
30.8
200
13.8
1674
47.4
250
17.2
2338
66.2
12
13
14
15
17
16
HAMMER 12”
DTH HAMMER 12”
QL120
The Robit® XII QL120 hammer is a valveless
DTH hammer designed to operate
efficiently at pressures ranging from 7
to 17.2 bar (100 250 psi). The Robit® XII
QL120 is supplied with a 6⅝” API regular
pin backhead and is fitted with a positive
seating check valve as standard.
In addition to the standard Hyper 121
button bits, the the Robit® XII QL120 can be
modified to accept bits with Mission SD12
and DHD112 shank design by replacing
the Chuck, Piston, Bit retainer, Wearsleeve
and backhead.
Robit® XII QL120 Valveless Hammer 12”
for 311 mm (12¼”) - 445 mm (17½”) diameter holes
Component parts
1
16
Ref
Description
Part Number
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Backhead 6⅝” reg Pin
Backhead / Chuck ‘O’ Ring
Check Valve
Check Valve Spring
Diverter
Compression Buffer
Control Tube Holder
Control Tube Buffers
Control Tube ‘O’ Ring
Control Tube
Piston
Wearsleeve
Bit Retainer (pair)
Bit Retaining ‘O’ Ring
Chuck
Breakout Washer Backhead
Complete Hammer
HSH1213880M120
HSH12114
HSH12108
HSH12110
HSH12120
HSH12128
HSH12131
HSH12129
HSH12130A
HSH12130120
HSH12103120
HSH12100120
HSH12137120
HSH12137AST
HSH12135120
HSH12126120
BR121H04
3
4
5
6
8
7
9
10
11
Hammer specifications
English
Metric
Weight (less bit)
1681 lbs
763 Kgs
Length (less bit)
74.39’’
1889 mm
Outside dia.
111/4’’
286 mm
Bore dia.
8.5”
216 mm
Piston weight
275 lbs
125 Kg
Stroke
5’’
127 mm
12
14
Air consumption
13
PSI
BAR
C.F.M.
Cu. Mtr / min.
2
100
7
592
16.8
150
10.3
1087
30.8
15
200
13.8
1674
47.4
250
17.2
2338
66.2
HAMMER 12½/300”
DTH HAMMER 12½/300”
N125
The Robit® XII 12½/300 N125 hammer is
designed to operate over a wide range
of operating air pressures. A 6⅝” API Reg.
Pin Backhead is supplied as standard. The
hammer is fitted with a positive seating
water check valve and is supplied as
standard, fitted with a solid choke.
The Robit® XII 12½/300 N125 is primarily
designed to be used with the Numa 125,
but other shanks will be considered on
request.
Robit® XII N125 Valveless Hammer 12½”/300
for 330 mm (13”) - 445 mm (17½”) diameter holes
1
Component parts
20
Ref
Description
Part Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Backhead 6⅝” reg Pin
Backhead ‘O’ Ring
Check Valve
Check Valve Spring
Diverter
Compression Buffer
Control Tube Holder
Control Tube Buffers (2)
Control Tube ‘O’ Ring
Control Tube
Piston
Wearsleeve
Guide Bush Retaining Ring
Bearing Guide Bush
Bit Retainer (pair)
Bit Retainer ‘O’ Ring
Chuck (N125 c/w drive plate slots)
Chuck Bearing
Breakout Washer (chuck)
Breakout Washer (backhead)
Drive Plate N125
Piston Retaining Ring
HSH1213880M125
HSH12114
HSH12108
HSH12110
HSH12120
HSH12128
HSH12131
HSH12129
HSH12130A
HSH12130
HSH12103125SP
HSH12100125SP
HSH12132125
HSH12187125
HSH12137125
HSH12137AST
HSH12135125
HSH12135125BE
HSH12126125
HSH12125125
DP125
HSH12132
Complete Hammer
BR125H03
Alternative Backhead 6 ” Reg Box
HSH121388FHEX125
3
4
5
6
8
7
9
10
11
12
Hammer specifications
Weight (less bit)
Length (less bit)
Outside dia.
Bore dia.
Piston weight
Stroke
2
14
English
Metric
1973 lbs
74.39”
12”
8.5”
275 lbs
5”
895 kgs
1890 mm
305 mm
216 mm
125 kg
127 mm
Air consumption
PSI
BAR
C.F.M.
Cu. Mtr / min.
100
150
200
250
7
10.3
13.8
17.2
592
1087
1674
2338
16.8
30.8
47.4
66.2
22
13
16
15
21
19
17
18
HAMMER 14”
DTH HAMMER 14”
N125
The Robit® XIV N125 hammer is a valveless
D.T.H Hammer designed to operate over
a wide range of operating pressures. The
hammer is supplied with a 6⅝” API regular
pin backhead as standard.
The Robit® XIV N125 is fitted with a positive
seating Water Check Valve and is supplied
as standard, fitted with a Solid Choke. The
hammer is primarily designed to be used
with the Numa 125, but other shanks will
be considered on request.
Robit® XIV N125 Valveless Hammer 14”
for 350 mm (13¾”) - 508 mm (20”) diameter holes
Component parts
1
2
Ref
Description
Part Number
1
Backhead 6⅝” reg Pin
HSH1413880M
2
Backhead ‘O’ Ring
HSH12114
3
Check Valve
HSH12108
4
Check Valve Spring
HSH12110
5
Diverter
HSH14120
6
Compression Buffer
HSH14128
7
Control Tube Holder
HSH14131
8
Control Tube Buffers (2)
HSH14129
9
Control Tube
HSH14130
10
Control Tube ‘O’ Ring
HSH14130A
11
Piston
HSH14103125
12
Wearsleeve
HSH14100
13
Bit Retainer (pair)
HSH14137125
15
Chuck (N125 C/W drive plate slot)
HSH14135125
16
Chuck Bearing
HSH14135125BE
17
Breakout Washer (Chuck)
HSH14126
18
Breakout Washer (Backhead)
HSH14125
19
Drive Plate N125 (10)
DP125
Complete Hammer
BR141H01
18
3
4
5
6
7
8
10
9
12
11
Hammer specifications
Weight (less bit)
Length (less bit)
Outside dia.
Piston weight
Stroke
English
Metric
2420 lbs
76.4’’
12.6’’
414 lbs
5.75’’
1100 Kgs
1941 mm
320 mm
188 Kgs
146 mm
13
19
17
Air consumption
15
PSI
BAR
C.F.M.
Cu. Mtr / min.
100
150
200
250
7
10.3
13.8
17.2
715
1311
2018
2821
20.2
37.1
57.1
80.0
16
HAMMER 18”
DTH HAMMER 18”
N180
The Robit® XVIII N180 hammer is a valveless
D.T.H Hammer designed to operate
efficiently at pressures ranging from 7 to
15.5 bar (100-225 psi).
The hammer is supplied with a 8⅝” api reg
pin backhead as standard but a 8⅝” api reg
box backhead can be supplied.
In addition to the standard Hyper 181 N180
button bits, the Robit® XVIII N180 can easily
be modified to accept bits with Mission
SD18 and QL200 shank design by simply
replacing the Chuck, Piston, Bit retainer
and Bearing.
Robit® XVIII N180 Valveless Hammer 18”
for 458 mm (18”) - 660 mm (26”) diameter holes
1
Component parts
2
Ref
Description
Part Number
3
1
Backhead 8⅝” reg Pin
HSH1813882M
2
Backhead ‘O’ Ring
HSH18114
4
3
Check Valve
HSH18108
4
Check Valve Spring
HSH18110
5
Valve Chest
HSH18107
6
Compression Buffer
HSH18128
7
Buffer Cover
HSH18173
8
Tube Holder
HSH18131
9
Tube Buffers (2)
HSH18129
10
Tube ‘O’ Ring
HSH18130A
11
Control Tube
HSH18130
12
Piston
HSH18103180
13
Wearsleeve
HSH18100
14
Bit Retaining Ring
HSH18137180
15
Chuck
HSH18135180
16
Chuck Bearing
HSH18135180BE
17
Breakout Washer
HSH18126
Complete Hammer
BR181H01
5
7
6
17
9
10
8
11
12
13
Hammer specifications
Weight (less bit)
Length (less bit)
Outside dia.
Bore dia.
Piston weight
Stroke
English
Metric
3545 lbs
86’’
16’’
12.25”
730 lbs
5.75’’
1608 Kgs
2185 mm
406 mm
311 mm
330 Kgs
146 mm
14
17
Air consumption
PSI
BAR
C.F.M.
Cu. Mtr / min.
100
125
150
175
200
225
6.9
8.6
10.3
12.0
13.8
15.5
1088
1520
1999
2518
3077
3672
30.8
43.1
56.6
71.3
87.1
103.4
15
16
HAMMER 18”
DTH HAMMER 18”
SD18
The Robit® XVIII SD18 hammer is a valveless
D.T.H Hammer designed to operate
efficiently at pressures ranging from 7 to
15.5 bar (100-225 psi).
The hammer is supplied with a 8⅝” api reg
pin backhead as standard but a 8⅝” api reg
box backhead can be supplied.
In addition to this Robit® XVIII SD18 model,
the hammer can easily be modified to
accept bits with Numa 180 and QL200
shank design by simply replacing the
Chuck, Piston, Bit retainer and Bearing.
Robit® XVIII SD18 Valveless Hammer 18”
for 458 mm (18”) - 660 mm (26”) diameter holes
1
Component parts
2
Ref
Description
Part Number
3
1
Backhead 8⅝” reg Pin
HSH1813882M
2
Backhead ‘O’ Ring
HSH18114
4
3
Check Valve
HSH18108
4
Check Valve Spring
HSH18110
5
Valve Chest
HSH18107
6
Compression Buffer
HSH18128
7
Buffer Cover
HSH18173
8
Tube Holder
HSH18131
9
Tube Buffers (2)
HSH18129
10
Tube ‘O’ Ring
HSH18130A
11
Control Tube
HSH18130
12
Piston
HSH18103096
13
Wearsleeve
HSH18100
14
Bit Retaining Ring
HSH18137096
15
Chuck
HSH18135096
16
Chuck Bearing
HSH18135096BE
17
Breakout Washer
HSH18126
Complete Hammer
BR181H02
5
7
6
17
9
10
8
11
12
13
Hammer specifications
Weight (less bit)
Length (less bit)
Outside dia.
Bore dia.
Piston weight
Stroke
English
Metric
3545 lbs
88¾’’
16’’
12.25”
730 lbs
5.75’’
1608 Kgs
2255 mm
406 mm
311 mm
330 Kgs
146 mm
14
17
Air consumption
PSI
BAR
C.F.M.
Cu. Mtr / min.
100
125
150
175
200
225
6.9
8.6
10.3
12.0
13.8
15.5
1088
1520
1999
2518
3077
3672
30.8
43.1
56.6
71.3
87.1
103.4
15
16
HAMMER 18”
DTH HAMMER 18”
QL200
The Robit® XVIII QL200 hammer is a
valveless D.T.H Hammer designed to
operate efficiently at pressures ranging
from 7 to 15.5 bar (100-225 psi).
The hammer is supplied with a 8⅝” api reg
pin backhead as standard but a 8⅝” api reg
box backhead can be supplied.
In addition to the standard Hyper 181
button bits, the Robit® XVIII QL200 can
easily be modified to accept bits with
Mission SD18 and N180 shank design by
simply replacing the Chuck, Piston, Bit
retainer and Bearing.
Robit® XVIII QL200 Valveless Hammer 18”
for 458 mm (18”) - 660 mm (26”) diameter holes
1
Component parts
2
Ref
Description
Part Number
3
1
Backhead 8⅝” reg Pin
HSH1813882M
2
Backhead ‘O’ Ring
HSH18114
4
3
Check Valve
HSH18108
4
Check Valve Spring
HSH18110
5
Valve Chest
HSH18107
6
Compression Buffer
HSH18128
7
Buffer Cover
HSH18173
8
Tube Holder
HSH18131
9
Tube Buffers (2)
HSH18129
10
Tube ‘O’ Ring
HSH18130A
11
Control Tube
HSH18130
12
Piston
HSH18103102
13
Wearsleeve
HSH18100
14
Bit Retaining Ring
HSH18137102
15
Chuck
HSH18135102
16
Chuck Bearing
HSH18135102BE
17
Breakout Washer
HSH18126
Complete Hammer
BR181H05
5
7
6
17
9
10
8
11
12
13
Hammer specifications
Weight (less bit)
Length (less bit)
Outside dia.
Bore dia.
Piston weight
Stroke
English
Metric
3545 lbs
84½’’
16’’
12.25”
730 lbs
5.75’’
1608 Kgs
2147mm
406 mm
311 mm
330 Kgs
146 mm
14
17
Air consumption
PSI
BAR
C.F.M.
Cu. Mtr / min.
100
125
150
175
200
225
6.9
8.6
10.3
12.0
13.8
15.5
1088
1520
1999
2518
3077
3672
30.8
43.1
56.6
71.3
87.1
103.4
15
16
HAMMER 18”
DTH HAMMER 18”
QL200S
The Robit® XVIII QL200S hammer is a
valveless D.T.H Hammer designed to
operate efficiently at pressures ranging
from 7 to 15.5 bar (100-225 psi).
The hammer is supplied with a 8⅝” api reg
pin backhead as standard but a 8⅝” api reg
box backhead can be supplied.
Robit® XVIII QL200S Valveless Hammer 18”
for 724 mm (28½”) - 864 mm (34”) diameter holes
1
Component parts
Ref
Description
Part Number
1
Backhead 8⅝” reg Pin
HSH1813882M
2
Backhead ‘O’ Ring
HSH18114
3
Check Valve
HSH18108
4
Check Valve Spring
HSH18110
5
Valve Chest
HSH18107
6
Compression Buffer
HSH18128
7
Buffer Cover
HSH18173
8
Tube Holder
HSH18131
9
Tube Buffers (2)
HSH18129
10
Tube ‘O’ Ring
HSH18130A
11
Control Tube
HSH18130
12
Piston
HSH18103180
13
Wearsleeve
HSH18100
14
Bit Retaining Ring
HSH18137101
15
Chuck
HSH18135101
16
Chuck Bearing
HSH18135101BE
17
Breakout Washer
HSH18126
18
Foot valve
BBF101
Complete Hammer
BR181H04
17
2
3
4
5
7
6
9
10
8
11
12
13
Hammer specifications
Weight (less bit)
Length (less bit)
Outside dia.
Bore dia.
Piston weight
Stroke
English
Metric
3846 lbs
90.66’’
16’’
12.25”
730 lbs
5.75’’
1748 Kgs
2303 mm
406 mm
311 mm
330 Kgs
146 mm
18
14
Air consumption
15
PSI
BAR
C.F.M.
Cu. Mtr / min.
100
150
175
200
225
6.9
10.3
12.0
13.8
15.5
1097
2016
2541
3105
3705
31.1
57.1
71.9
87.9
104.9
16
17
HAMMER 24”
DTH HAMMER 24”
N240
The Robit® XXIV N240 hammer is a valveless
DTH hammer designed to operate
efficiently at pressures ranging from 7 bar
to 15 bar (100psi-225psi).The hammer is
supplied with an 8⅝” api reg pin Backhead
as standard or an 8⅝” api reg box thread
can be supplied also. A positive seating
check valve is fitted and the Robit® XXIV
N240 is supplied to suit N240 shank type
button bits as standard.
Robit® XXIV N240 Valveless Hammer 24”
for 610 mm (24”) - 864 mm (34”) diameter holes
1
2
Component parts
Ref
Description
Part Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Backhead Adaptor 8⅝” reg. Pin
Backhead Adaptor Breakout Washer
Backhead
Check Valve
Check Valve Spring
Valve Chest
Compression Buffer
Backhead “O” Ring
Internal Backhead “O” Ring
Tube Buffers (2)
Control Tube
Piston
Bit Retaining Ring
Bit Retainer “O” Ring (2)
Chuck
Chuck Bearing
Breakout Washer Backhead & Chuck (2)
Internal Washer Adaptor
Wearsleeve
HSH2413682M
HSH24127
HSH24138
HSH18108
HSH24110
HSH24104
HSH24128
HSH241114
HSH241114A
HSH24129
HSH24130
HSH24103240
HSH24137240
HSH24137A240
HSH24135240
HSH24135240BE
HSH24125
HSH24106
HSH24100
Complete Hammer
BR241H01
3
18
4
17
5
6
7
8
9
10
11
12
19
Hammer specifications
Weight (less bit)
Length (less bit)
Outside dia.
Bore dia.
Piston weight
Stroke
English
Metric
5522 lbs
92.7’’
21’’
17.02”
1276 lbs
6.00’’
2510 Kgs
2355 mm
533 mm
433 mm
580 Kgs
152 mm
13
14
15
Air consumption
PSI
BAR
C.F.M.
Cu. Mtr / min.
100
125
150
175
200
225
6.9
8.6
10.3
12.0
13.8
15.5
2281
3188
4191
5281
6452
7699
64.6
90.3
118.7
149.5
182.7
218
17
16
HAMMER 24/32”
DTH HAMMER 24S”
XL24/32
The Robit® XXIV XL24/32 hammer is a
valveless DTH hammer designed to operate
efficiently at pressures ranging from 7 to
12.06 bar (100 - 175 psi). The Hhammer is
supplied with a 10” beco pin backhead as
standard, but an 8⅝” box backhead can be
supplied. A positive seating check valve is
fitted. The Robit® XXIV XL24/32 is supplied
to suit the XL24/32 shank as standard.
Robit® XXIV XL24/32 Valveless Hammer 24S”
for 864 mm (34”) - 1220 mm (48”) diameter holes
Component parts
Ref
Description
Part Number
1
Backhead adaptor 10” Beco Pin
Breakout washer (adaptor)
Backhead
Check Valve
HSH24138AD083M
HSH24127
HSH24138
HSH24108
Backhead “O” ring
Valve Chest
Compression Buffer
Backhead sealing “O” ring
Control Tube “O” Ring
Control Tube Buffers (2)
Control Tube
Piston
Bit Retaining Ring
Chuck
Breakout Washer (backhead)
Wearsleeve
Breakout Washer (chuck)
HSH24114A
HSH24104
HSH24128
HSH241114B
HSH2411514
HSH24129
HSH24130
HSH301S03XL24
HSH301S37XL24
HSH301S35XL24
HSH24125
HSH241S00
HSH241S26
Complete Hammer
BR241SH01
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Hammer specifications
Weight (less bit)
Length (less bit)
Outside dia.
Bore dia.
Piston weight
Stroke
English
Metric
8800 lbs
100’’
29.3’’
17.7”
1400 lbs
6’’
4000 Kgs
2540 mm
745 mm
433 mm
630 Kgs
152 mm
Air consumption
PSI
BAR
C.F.M.
Cu. Mtr / min.
100
125
150
175
6.9
8.6
10.3
12.0
2188
3059
4020
5066
61.9
86.6
113.8
143.4
Notes:
ROBIT ROCKTOOLS LTD
Tel: +358 3 3140 3400
Vikkiniityntie 9
Fax: +358 3 367 0540
FI-33880 LEMPÄÄLÄ (TAMPERE)
E-mail: [email protected]
FINLANDhttp://www.robit.fi
Your distributor:
Robit reserves all rights to any changes in the products and the specifications without prior notice.
Printed: October 2014, Copyright © 2014 by Robit Rocktools Ltd.