The Ultimate in Performance www.leadwell.com.tw
Transcription
The Ultimate in Performance www.leadwell.com.tw
Horizontal Machining Center The Ultimate in Performance LEADWELL CNC MACHINES MFG.,CORP NO.23, Gong 33th Road, Taichung Industrial Park Taichung 407, Taiwan TEL: 886-4-23591880 FAX: 886-4-23592555, 23593875 E-mail: [email protected] www.leadwell.com .tw MH-630 Rollor Bearing High Rigidity, High Productivity and High Reliability ● ● ● ● ● ● ● ● ● ● ● ● ● ● Smaller Footprint , Larger Machine Capacities “ STEPPED BED “ rear X axis ,increase 50 % Strength . Cross Type Frame via designed by F.E.A Pallet Clamping System x 4 coin / Clamping Force 5, 000 kg Pallet load weight 1,200 kg Heavy Duty Roller Guide ways up to 65 mm. X / Y /Z Linear guide way span distance 800/ 620/ 769 mm Expandable ATC 40/60 /80 /120 Tools Direct Driver D.D.S. Spindle 4 sets Cartridge Ceramic Bearing. X/Z axis Rapid speed up to 48 mm. Central Grease Lubricating system Servo motor ATC system Swing Type Control Penal. T-shape base for easy disposal of chips. -01- Stepped bed design -02- MH-630 ATC system Standard Accessories Option 60/80/100/120 Tools Standard 40 Tools Direct Drive Spindle (Standard 8000rpm) Chip Coveyor(Auger Type) Chip Coveyor(Chain Type) F.E.A Lubrication system Optional Accessories Oil Skimmer -03- OMP-60 Mist Collector -04- NC-4 MH-630 Machine Specifications SPINDLE MOTOR TORQUE DRAWING 165.52 26kw(34.9HP) 30 min operating zone(High speed) 160 TORQUE(N-m) 140 26kw(34.9HP) 30 min operating zone(Low speed) 140 120 100 22kw(29.5HP) Cont.operating zone(High speed) 80 22kw(29.5HP) Cont.operating zone(Low speed) 62.1 60 52.5 40 20 0 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 40 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 CAPACITY X axis travel Y axis travel Z axis travel Distance from table surface to spindle center Distance from table center to spindle end TABLE Table size Maximum table load weight SPINDLE Spindle speed Spindle nose (normal size, No.) Spindle bearing inner diameter FEEDRATE Rapid traverse X/Y/Z Max. cutting feedrate A.T.C. Tool storage capacity Max. tool diameter(with adjacent tools) Max. tool diameter(without adjacent tools) Maximum tool length Tool change time(T-T) A.P.C Number of pallets Pallet changing time MOTORS Spindle motor(30 min/cont) FANUC X/Y/Z axis feed motors MISCELLANEOUS Power Requirements Height of machine Floor space(LxW) Total Machine Weight Control POWER(kw) 180 SPINDLE SPEED Workpiece Drawing 2190 960 960 Unit mm (in) mm (in) mm (in) mm (in) mm (in) 1020(40.2) 850(33.5) 950(37.4) 100-950(3.9-37.4) 150-110(5.9-43.3) mm (in) kg (lb) 630 x 630(24.8 x 24.8) 1200(2645) rpm mm(in) 8000 No.50 90(3.5) M/min(IPM) M/min(IPM) 48/36/48(1887/1417/1887) 1-10000(0.04-393) pcs mm(in) mm(in) mm(in) sec 40 118(4.6) 236(9.3) 400(15.7) 3.5 pcs sec 2 15 kw(HP) kw(HP) 18.5/22(24.7/29.3) 6/6/7(8/8/9.4) KVA mm(in) mm(in) kg(lb) FANUC 70 3500(137.8) 5100 x 4000(200.8 x 157.5) 22500(49500) 0i -M •Spindle oil chiller •Spindle speed 8000rpm •Rigid tapping •Metric table •Arm ATC with 40 tools magazine •Full enclosure guarding •Shower coolant •Chip conveyor inside machine (auger type) •Chip conveyor + bucket outside machine •Work light •Alarm lamp •Simple tool life measurement •CTS from A •Linear scale X/Y/Z axes •Tool overload detection •Automatic tool length measurement •Automatic workpiece measurement •Oil mist collector •Oil skimmer •Rotary table 0.001° •Coolant gun •Din 50/CAT 50 tool shank •Arm A.T.C. with 60/80 tools magazine •Inch table 1600 Dynamic ASME B5.54 696 542 Accuracy VDI(3441) 117 Repeatability mm 0.007/1000 Positioning mm 0.01/1000 SRepeatability sec ±1 Indexing sec ±5 X/Y/Z 745 2214.5 1150 6381.5 5639.5 4th Axis Rotary Table 2930 4702 3726 3500 664 STANDARD OPTIONS Ball Bar Test 465 682 Outline Drawing STANDARD ACCESSORIES MH-630 α22/10000 i -8000rpm 200 10.0µm/div -05- -06- 2013.01