HDD Catalog - 2006

Transcription

HDD Catalog - 2006

®
HDD TOOLING
AND ACCESSORIES
Equipment shown is for illustrative purposes only and may display optional accessories or components.
Please contact your local Vermeer dealer for more information about machine specifications.
Vermeer Corporation reserves the right to make changes in engineering, design and specifications;
add improvements; or discontinue manufacturing at any time without notice or obligation.
Vermeer, the Vermeer logo, Atlas Bore Planner, NAVTEC, FieldCalc, RockFire, Navigator, Firestick, Sitestar, Hammer, Club, Spear and Interragator are trademarks of
Vermeer Manufacturing Company in the U.S. and/or other countries.
Active Head, Splinelok, TriHawk and HammerHead Mole are registered trademarks of Earth Tool Company in the U.S. and/or other countries.
Ditch Witch is a trademark of The Charles Machine Works, Inc.
Eclipse is a trademark of Digital Control Incorporated.
John Deere is a trademark of Deere & Company.
McLaughlin, Mole Map and Spot-D-Tek are trademarks of McLaughlin Manufacturing Company.
Drill Track and Radiodetection are trademarks of Radiodetection Limited.
Rycom and Magnastick are trademarks of Rycom Instruments, Inc.
© 2010 Vermeer Corporation. All Rights Reserved.
TABLE OF CONTENTS
Genuine Vermeer Tooling
— an introduction to quality Vermeer HDD products
and accessories. Highlights include information about Vermeer drive chucks, drill stem,
starter rods and more.
API Reamers, Crossover Sub/Adapters And Competitive
Starter Rods – D24x26 drills and smaller or 24,000 lb (10,886.2 kg) pull and 2700 ft-lb
(3660.7 Nm) torque or less, D40x40 drills and smaller or 50,000 lb (22,679.6 kg) pull and
6000 ft-lb (8134.9 Nm) torque or less, D100x120 drills and smaller or 100,000 lb (45,359.2
kg) pull and 15,000 ft-lb (20,337.3 Nm) torque or less.
Compact HDD Tooling — D6x6, D7x11 Series II, D7x11A, D7x11A QS, D7x11A
Series II, D10X14, D10x15, compact HDD bits, API reamers, compact HDD Vermeer
connection reamers, compact HDD accessories.
Medium HDD Tooling
— D16x20 Series II, D16x20A, D18x22, D20x22 Series II,
D20x22FX Series II, D24x26, D24x33, D24x40, D24x40A, D24x40 Series II, D33x44,
D36x50, D36x50 Series II, D40x40, medium HDD bits, API reamers, medium HDD Vermeer
connection reamers, medium HDD accessories.
Large, Jumbo and Maxi HDD Tooling
— D50x100, D50x100A, D55x100,
D75x100, D80x100, D80x100 Series II, D80x120, D100x120, D100x120 Series II,
D150x300, D200x300, D300x500, D330x500, D500x500, D750x900, D1000x900, large HDD
bits, API reamers, large HDD Vermeer connection reamers, large HDD accessories.
Rock-Drilling Equipment — RockFire
®
systems, RS assemblies, R.A.T.T., mud
motor, tri-cone bits, hole openers.
HDD Pullers, Vise Jaws and Accessories — HDD accessories, drill stem
maintenance kit and thread compound, locators, bore-planning tools, GPR systems, remote
lockout systems, fleet-management systems, worksite items.
Glossary — a collection and explanation of frequently used HDD terms.
GENUINE VERMEER TOOLING
TAB
BACK OF
TAB
Vermeer Maintenance Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Genuine Vermeer Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Vermeer Firestick Drill Stem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
TriHawk® Drill Heads & Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Drill Bit Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Vermeer Backreamers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Rock Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
HDD Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Vermeer Portable Breakout Wrenches . . . . . . . . . . . . . . . . . . . . . . . .18
Vermeer Field Breakout Bench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Vermeer HDD Copper Thread Compound . . . . . . . . . . . . . . . . . . . . .18
HammerHead® Pneumatic Piercing Tools . . . . . . . . . . . . . . . . . . . . .19
7
VERMEER MAINTENANCE PROGRAMS
THE NAVIGATOR® HDD SCHEDULED MAINTENANCE PROGRAM
The Vermeer Navigator HDD Scheduled Maintenance Program helps improve your
operationʼs efficiency through regularly scheduled preventive maintenance of your
HDD equipment. It follows the service intervals outlined in your Vermeer operatorʼs
and maintenance manuals; all service is performed at an authorized Vermeer service
facility with genuine OEM Vermeer parts.
Vermeer is committed to building the industryʼs most reliable equipment and backing
it with an exclusive, worldwide network of knowledgeable service personnel.
Advanced service training is offered by the factory-to-dealer service personnel to help
maximize productivity. The Navigator HDD Scheduled Maintenance Program —
another reason Vermeer is the right choice for your equipment needs.
Contact your authorized Vermeer dealer for replacement parts, and repair and
rebuild service.
8
ORDER TODAY! CALL 1-866-VERMEER
VERMEER MAINTENANCE PROGRAMS
Reamer Carrier Decals
Portable Breakout Wrench System
Field Breakout Bench
9
YOUR TOTAL SOLUTION
Part Number
Machine
Size
222394001
D6x6
D7x11A
1.315” (3.3 cm) OD X
.179” (.45 cm) wall
thickness with 1.88”
(4.8 cm) upset
216492001
Joint
ID
Thread
Lgth.
Wght.
Ft. of
Rod
to
Bend Bend
Radius 90˚
Max.
Angle
in
˚s
/Rod
Max.
%
Slope
%
/Rod
Torque
Rating
Firestick - #200
.75”
6’ 18 lb/stem 57.3’ 90’
5.7
(1.9 cm) (1.8 m) (8.2 kg) (17.5 m) (27.4 m)
9.9
900 ft-lb
(1220.2 Nm)
D7x11A
D7x11A QS
D7x11A II
1.66” (4.2 cm) OD X .191” Firestick - #200
(.49 cm) wall thickness
with 1.88” (4.8 cm) upset
.75”
6’
23 lb/stem 95.5’ 150’ 3.6
(1.9 cm) (1.8 m) (10.4 kg) (29.1 m) (45.7 m)
6.2
1,500 ft-lb
(2038.7 Nm)
219006001
D10x15
D10x14
1.66” (4.2 cm) OD X .191” Firestick - #200
.75”
10’
(1.9 cm) (3 m)
10.5
1,500 ft-lb
(2038.7 Nm)
230993001
D16x20A
D18x22
D20x22
1.90” (4.8 cm) OD X .191” Firestick - #250
.75”
(1.9 cm)
10.2
2,000 ft-lb
(2711.6 Nm)
221628001
D18x22
D20x22
D24x26
2.06” (5.2 cm) OD X .260” Firestick - #400
.875”
10’
(2.2 cm) (3 m)
59 lb/stem 101.9’ 160’
5.6
(26.8 kg) (36.1 m) (48.8 m)
9.8
2,600 ft-lb
(3525.1 Nm)
222276001
D24x40
D24x40A
D24x40 II
2.38” (6 cm) OD X .254”
Firestick - #600
.875”
10’ 75 lb/stem 108.2’ 170’
5.3
(2.2 cm) (3 m)
(34 kg)
(33 m) (51.8 m)
9.3
4,000 ft-lb
(5423.3 Nm)
296309599
D33x44
D36x50
2.375” (6 cm) X .295”
with 2.75” (7 cm) upset
Firestick - #650
1”
10’ 81 lb/stem 108’ 170’
5.3
(2.5 cm) (3 m) (36.75 kg) (33 m) (51.8 m)
9.3
5,000 ft-lb
(6779.1 Nm)
296312531
D33x44
D36x50
2.375” (6 cm) X .295”
with 2.75” (7 cm) upset
Firestick - #650
296309522
D36x50 II
2.626” (6.7 cm) X .40”
(1 cm) wall thickness
Firestick - #700
296309521
D36x50 II
2.626 (6.7 cm) X .40”
Firestick - #700
1.25”
15’ 165 lb/stem 145’
(3.2 cm) (4.6 m) (74.8 kg) (13.7 m) (69.4 m)
222455001
D40x40
D36x50 II
2.38” (6 cm) OD X .295”
Firestick - #650
222452001
D50x100
D50x100A
2.875” (7.3 cm) OD X .392” Firestick - #900
222454001 D50x100A
D55x100
D75x100
D80x100
D80x100 II
296309520
10’
51 lb/stem 98.7’ 155’
5.8
(3 m) (23.1 kg) (30.1 m) (47.2 m)
1”
15’ 120 lb/stem 108’ 170’
(2.5 cm) (4.6 m) (54.4 kg) (32.9 m) (51.8 m)
1.25”
10’
117 lb/stem 145’ 228’ 5.9
(3.2 cm) (3 m) (53.1 kg) (13.7 m) (69.4 m)
228’
1.25”
15’ 176 lb/stem 168.7’ 265’
(3.2 cm) (4.6 cm) (79.85 kg) (51.4 m) (80.8 m)
13.8
5,000 ft-lb
(6779.1 Nm)
10.3
5,000 ft-lb
(6779.1 Nm)
5.9
10.3
5,000 ft-lb
(6779.1 Nm)
.875”
15’ 110 lb/stem 108.2’ 170’
7.9
(2.2 cm) (4.6 cm) (49.9 kg) (33 m) (51.8 m)
5
13.8
4,000 ft-lb
(5423.3 Nm)
8.7
9,000 ft-lb
(12,202.4 Nm)
1.5”
15’
250 lb/stem 197.4’ 310’ 4.3
(3.8 cm) (4.6 cm) (113.4 kg) (60.2 m) (94.5 m)
7.5
10,000 ft-lb
(13,558.2 Nm)
Firestick - #1000
2.25”
20’
351 lb/stem 197’ 310’
5.8
(5.7 cm) (6.1 cm) (159.2 kg) (60 m) (94.5 m)
10.2
15,000 ft-lb
(20,337.3 Nm)
For Firestick II, see the factory for details.
10
7.9’
FIRESTICK - #800
3.5” (8.9 cm) OD X .449”
(1.1 cm) wall thickness
D100x120 II 3.5” (8.9 cm) OD X .476”
(1.2 cm) wall thickness
38 lb/stem 95.5’ 150’
6
(17.2 kg) (29.1 m) (45.7 m)
THE TOTAL SOLUTION
WORLD LEADER IN HDD
Quality Vermeer tooling is offered through the Vermeer Cutting Edge Group —
producers of some of the most popular drill heads, cutting bits, backreamers and
specialty tooling.
Vermeer HDD downhole accessories have stood the test of time on worksites
across the globe. Serious contractors choose Vermeer tooling and
accessories for good reason: using quality Vermeer tooling helps increase
bore production and completion.
Add the support and availability of an integrated worldwide
dealer network, and you can understand why Vermeer is a
world leader in HDD. Call today to order your genuine
Vermeer tooling and accessories!
DEPENDABLE DRILL STEM
What price are you paying for drill stem? Stuck bores, damaged stem, premature
failure and worn joints — less expensive drill stem can often cost more than
you bargained for. Firestick stem is the only drill stem approved for use with
Vermeer Navigator HDD systems.
Each Firestick drill stem is composed of special-grade steel and has an
exclusive serial number that ensures it passed a battery of the industry’s toughest
quality-assurance tests. The result: a drill stem that can help lower costs because
it lasts longer and is less likely to fail.
Add a worldwide network of dealer support and you will see why Firestick drill
stem is a good value in today’s drill stem market.
11
YOUR TOTAL SOLUTION
DRILL BITS
Vermeer drill bits are constructed of a superior blend of
steels and alloys and are heat-treated for maximum wear
characteristics. A wide range of Vermeer bits are available
for a variety of projects that range from drilling in dirt to rock
and everything in-between.
CHEVRON II BIT
There are many imitations out there — stick with the original
from Vermeer! Vermeer Chevron bits feature a proven design
that performs in most soil conditions. The Chevron II has
been improved to provide even better performance and
greater durability than its predecessor. Bits are .25" (.6 cm)
thicker! For the D16x20 Series II – D40x40, bits are now 1"
(2.5 cm); D50x100 – D80x100 Series II models are now
1.25" (3.2 cm). Additionally, the steering face has been
lengthened and the steering angle is increased for better
maneuverability.
VCTT BIT
The Vermeer carbide twin tooth bit takes plate-type bits to
the next level — there is nothing else like it! Twin rotary carbide tips provide greater penetration, hardfacing and carbide
buttons along the edges provide aggressive cutting action
with increased wear resistance in abrasive conditions.
ROTARY BIT
The Vermeer rotary tooth bit takes plate-type bits to the next
level — there is nothing else like it! Rotary carbide tips
provide greater penetration, hardfacing and provide
aggressive cutting action with increased wear resistance in
abrasive conditions.
12
YOUR TOTAL SOLUTION
TRIHAWK DRILL HEADS
The TriHawk modular drilling system is one of the most advanced drilling systems in the
world. Automatic indexing aligns the steering plane to the clock. Transmitter isolators
help protect against dynamic vibration, while increasing the life of the transmitter and
battery. The TriHawk line features an advanced, patented, boltless spline bit connection.
The result is a system with no bolts to come loose during a bore.
The TriHawk housing works with a variety of transmitters, while threaded API adapters fit
a multitude of connections. TriHawk bits are interchangeable and install in minutes. A
broad range of bits help provide solutions for almost any job, from dirt to medium-hard
rock to hard, compacted cobble.
TRIHAWK I BIT
Designed for drilling in a variety of soil conditions. TriHawk I is a great choice when
drilling in soft rock. It also performs well in dry compacted soil, cobble and broken
formations. Carbide hardfacing is strategically placed to reduce washing of base metal
when drilling in abrasive conditions.
TRIHAWK II BIT
Designed for use in dry compressed soil conditions and is a good choice when drilling in
hardpan, dry clay and any other compacted soils. Carbide hardfacing is strategically
placed to reduce washing of base metal when drilling in abrasive conditions.
TRIHAWK III BIT
Designed with the fine qualities of other TriHawk bits with greatly improved abrasion
resistance and significantly longer lasting teeth. It is a good choice for soft to medium
rock or cobble bores. Tooth angle, water port placement and a wide, long steering plane
lend themselves to everyday drilling conditions. Carbide grit is not only applied to the bit
surface, but also into grooves that are cut into high-wear areas.
TRIHAWK IV BIT
Designed for use in heavy rock, over burden cobble or fractured rock.
Chisel carbides cut and fracture annular space for the drill head. Carbide
hardfacing is strategically placed to reduce washing of base metal when
drilling in abrasive conditions.
TRIHAWK V BIT
Designed to combine torque-edge and thrust-face steering
by converting rotational torque to direct steering thrust for greater
control. The cup-shaped steering face allows controlled directional
drilling in round rock cobble, flat river stone, hardpan and loose fill.
This bit also performs great in most soils.
13
TOOL APPLICATIONS
DRILL BITS
DRILL BIT APPLICATION CHART
Vermeer offers a full line of drill bits to fit all types
of soil and ground conditions. Vermeer drill bits are
constructed of a superior blend of steel and alloys,
and offer excellent performance in the field. The drill
bit chart highlights each bit and conditions that may
be appropriate for its use. The chart is intended as a
guide only — actual performance may vary. Contact
your local dealer for more information.
DRILL BIT APPLICATIONS
Type
Sandy*
Mini
4
Econo Bit
5
Standard
3
Hardface
5
Chevron II
3
Shark
2
Spear
2
Club
3
Mallet
3
VCT
3
VCP
2
VCTT
2
Rotary Bit
2
TriHawk I
1
TriHawk II
2
TriHawk III
2
TriHawk IV
1
TriHawk V
5
TM
TM
TM
Clay/Loamy*
5
5
5
5
4
2
3
4
4
4
3
3
3
3
3
3
2
5
Dry/Compacted* Cobble/Broken Formation
4
1
4
2
3
1
4
3
5
3
5
4
5
5
4
4
4
4
4
4
5
5
5
5
5
5
4
4
5
3
5
4
2
4
5
5
1 Not Recommended
2 May Possibly Be Used
3 Fair
*Reactive soils: soils with properties that will change in relation to moisture content.
Soft Rock
1
1
1
1
1
1
2
1
1
1
2
2
2
5
3
5
4
3
Medium Rock
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
3
3
1
4 Good
SOIL CONDITION DESCRIPTION
Sandy
Sand, sandy loam, running sand; any soil in which sand is the major component
Clay/Loamy
Clay, loam, silt; most soft-to-medium soils that have some moisture
Dry/Compacted
Hardpan; any dry clay, any compacted soil
Cobble/Broken Formation Cobble, gravel, glacial till, chunk rock; any nonconsistent type of rock
Soft Rock
Sandstone, shales, soft limestone, caliche, some coral [up to around 8000 psi (551.6 bar)]
Medium Rock
Some limestone, shale, coral between 8000 psi – 15,000 psi (551.6 bar – 1034.2 bar)
Hard Rock
Hard limestone, granite, schist; anything above 15,000 psi (1034.2 bar)
Hard Rock
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5 Best Choice
NOTE: Soil conditions are usually not consistent throughout the length of any one bore — the above chart is intended only as a guide. Actual
performance may vary depending on soil varieties, subsurface conditions, operator experience and other factors unique to your geographical
area and drilling practices.
14
TOOL APPLICATIONS
BACKREAMERS
BACKREAMER APPLICATION CHART
Vermeer offers a variety of strong and durable
backreamers to fit all types of soil and ground
conditions. The backreamer chart highlights each
backreamer and conditions that may be appropriate
for its use. The chart is intended as a guide only —
actual performance may vary. Contact your local
dealer for more information.
BACKREAMERS APPLICATIONS
Type
Bar Cutter
Wing Cutter
Wing Bell Mixer
Helical
Helical Plus
Mix Master
Bell with Teeth
Spiral
T-Rex
Fluted/Shark
Fluted/Rotary
Super Fluted/Rotary
Super Fluted/Shark
Sandy* Clay/Loamy* Dry/Compacted* Cobble/Broken Formation
4
4
5
1
4
4
5
2
2
2
5
2
5
5
5
1
5
5
5
1
5
5
5
1
2
2
2
4
2
3
2
5
3
3
4
5
3
3
4
4
3
3
4
4
4
3
4
4
4
3
4
4
1 Not Recommended
3 Fair
Soft Rock Medium Rock Hard Rock
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
3
2
1
2
1
1
2
1
1
2
1
1
2
1
1
4 Good
5 Best Choice
Sandy
Clay/Loamy
Dry/Compacted
Hardpan; any dry clay, any compacted soil
Soft Rock
Sandstone, shales, soft limestone, caliche, some coral [up to around 8000 psi (551.6 bar)]
Medium Rock
Some limestone, shale, coral between 8000 psi – 15,000 psi (551.6 bar – 1034.2 bar)
Hard Rock
Hard limestone, granite, schist; anything above 15,000 psi (1034.2 bar)
NOTE: Soil conditions are usually not consistent throughout the length of any one bore — the above chart is intended only as a guide, actual
15
THE TOTAL SOLUTION
BACKREAMERS
Vermeer offers a number of innovative backreamers designed and engineered from customer feedback in
varying jobsite conditions around the world. Quality constructed and proven in the field, Vermeer backreamers
can help you succeed on your worksite. Several models include:
Fluted — cuts and slurrifies, while the flutes pump spoil to the backside of the
reamer. Cast, abrasion-resistant body includes swivel and hard-facing. Cutting action is
provided by carbide-tipped teeth. Made for tough soil conditions. For a long service life,
this reamer can be rebuilt multiple times. Now available . . . the new Super Flute with
heat-treated casting for improved wear, increased flute volume, with rotary or shark teeth
in various diameters, a swivel or through shaft, additional cutting teeth and improved
performance, and a through shaft design for added strength and integrity. It’s also
rebuildable and has enhanced connection options.
Wing Cutter / Compact HDD — features tough, replaceable carbide cutting teeth set into sturdy
wings. Provides excellent slurrification in consistent sand and clay.
Wing Cutter / Medium & Large HDD — features tough, replaceable carbide cutting
teeth set into sturdy wings. Provides excellent slurrification in consistent sand and clay.
Helical — the patented design of this backreamer allows contractors to conquer tough
pullbacks. Fluid is dispersed throughout the bore diameter; carbide-tipped shark teeth
cut and break up material.
Helical Plus — provides ultimate slurrification of the bore path — with less torque.
Spiral — with a built-in, heavy-duty swivel, the spiral backreamer offers effective piercing
and dispersal action.
Super Helical — is based on the Helical reamer, but adds a hardfaced bar cutter for
more aggressive capabilities.
Mix Master — provides excellent slurrification and cutting ability in softer to medium soil
conditions.
NEW!
T-Rex — rugged stacked plate reamer designed for the most extreme drilling conditions. Ideal for
hard-packed material, cobble and soft rock. Available with shark or rotary teeth for effective
cutting; strategically placed carbide hardfacing adds wearability. Available in a through-shaft
design or a built-in swivel assembly.
16
YOUR TOTAL SOLUTION
REAMER CARRIER
The reamer carrier provides an easy way to install
or remove reamers when the machine is locked
out. The carrier allows the reamer to be turned by
hand without rotating the drill string.
Two sizes available — part number 296255490 will
handle reamers up to 24" (61 cm) in diameter, up
to 40" (101.6 cm) long, with a max weight of 1000 lb
(453.6 kg); part number 296260037 will handle reamers
up to 48" (121.9 cm) in diameter, up to 108" (274.3 cm)
long, with a max weight of 2400 lb (1088.6 kg).
For reamers that exceed 108" (274.3 cm) or 2400 lb
(1088.6 kg), contact Vermeer Corporation.
HDD ACCESSORIES
Get the high-tech edge from Vermeer. Vermeer offers a
number of sophisticated and simple-to-use electronic
units and software programs that increase bore accuracy,
ease utility location and help with surveys.
From pull grips to shackles and swivels, quality Vermeer
accessories have been tested on jobsites around the
world. Your job is only as good as your weakest link —
choose genuine Vermeer accessories for peace of mind.
PULL GRIPS
DOUBLE EYE SWIVELS
Vermeer double eye swivels are designed for use with
Vermeer reamers and pulling eyes to limit the angle to 15
degrees. Vermeer swivels and reamers aligned within this
limited angle will have a reduced probability
of whipping and rotating the trailed product.
17
THE TOTAL SOLUTION
PORTABLE BREAKOUT WRENCH SYSTEM
The portable breakout system is a compact and powerful breakout tool
that provides a convenient way to loosen or tighten a threaded connection.
The system includes wrenches, a hydraulic hand pump with gauge and
hoses. Works with Navigator HDDs from the PL8000 through the
D100x120 Series II. Use to makeup and breakout API adapters, API reamer
spuds, mud motors, or any torque-up-type tool connections. For
safety when working on drill-string tooling, always use with the patented
Vermeer remote lockout system.
Contact dealer for information.
MODEL
MAX. TORQUE
OUTSIDE DIAMETER (O.D.) RANGE
PN
2.6K
2600 ft-lb (3525.1 Nm)
1.5" – 2.25" (38.1 mm – 57.2 mm)
295577001
7.5K
7500 ft-lb (10,168.6 Nm)
2.25" – 4.875" (57.2 mm – 123.8 mm)
279995001
15K
15,000 ft-lb (20,337.3 Nm)
3.25" – 5.375" (82.6 mm – 136.5 mm)
279998001
BREAKOUT BENCH PN 296281920
The field breakout bench is a breakout tool for disassembly and assembly
of selected tools’ threaded components, including the RS7 and the
removal and assembly of adapters for small reamers. This bench is small
enough that it can be mounted on a service truck to perform field
repairs and field maintenance.
MODEL
MAX. TORQUE
OUTSIDE DIAMETER (O.D.) RANGE
15K
15,000 ft-lb (20,337.3 Nm)
2.13" – 7" (54.1 mm – 177.8 mm)
VERMEER HDD COPPER THREAD COMPOUND
Exclusively developed for use with Firestick drill stem, this
special blend includes copper flake, graphite, antioxidants, extreme
pressure/anti-wear additives and rust/corrosion inhibitors for superior
levels of performance. Key benefits include reduced stress on threads
during makeup and breakout, reduced vise jaw wear and promotion of
proper joint makeup. This lead-free formula is also available in an arctic
grade for seasonal applications. Designed for horizontal directional drillers,
Bio-Stick grease is designed to provide good adhesion to wet joints during
the drilling process, and can be used in a wider range of temperatures
while working efficiently in most auto greasers. Bio-Stick grease is
biodegradable and nontoxic, making it safer to use in environmentally
sensitive areas. Its special formula also makes it user-friendly – allowing for
easy removal and cleanup from clothing and other surfaces.
18
PNEUMATIC PIERCING TOOLS
THE EASY AND PROFITABLE WAY
TO GO UNDERGROUND.
When it comes to productivity, Vermeer HammerHead Mole®
pneumatic piercing tools deliver the productivity and reliability
needed to keep you on the job. Whether you’re boring a hole
under a sidewalk to install coaxial cable, or under a highway
to get natural gas service from the main to a new customer,
HammerHead tools offer you complete solutions.
110 psi (7.6 bar) Pressure Means
Greater Penetrating Power!
HammerHead Mole tools — A great choice for your money.
HammerHead Mole pneumatic piercing tools create a compact hole for
almost any underground installation with minimal disruption to landscapes,
buildings or normal traffic flow.
Quick in-the-field maintenance
helps keep you on the job.
19
PNEUMATIC PIERCING TOOLS
Design Makes the Difference
Replaceable Head Tool
b. Wear Ring
a. Replaceable Head
b. Wear Ring
e. Active Head Nose
Active Head™ Tool
c. Screw Reverse
b. Wear Ring
b. Wear Ring
d. Power Port Reverse
a. Replaceable Head
— Leads to longer tool life
— Works hard in all soil conditions
b. Wear Rings
— Ensures no metal-to-metal contact
— Offers sustained level of performance
c. Screw Reverse
— Offers flexible control
— Has neutral position for easy locating
20
f. Clamped Rear Anvil
e. Active Head Nose
— Excels in compact and rocky soils
— Is replaceable to extend tool life
f. Clamped Rear Anvil Design
— Is a patented tailbolt system
— Offers fast and easy field maintenance
Clamped
Rear Anvil
d. Power Port Reverse
— Quarter turn forward and reverse
— Locks in position while operating
Pullers, launchers, oilers, oil — Vermeer has
the tools you need. Youʼll find a complete line of
HammerHead Mole accessories to make your job easier
and keep your equipment in good condition.
f. Clamped Rear Anvil
Pipe bursting and pipe ramming — a wide range
of pipe-ramming and pipe-bursting accessories are available
for your HammerHead Mole tools. Whether youʼre replacing
sewer laterals, culverts or main lines, HammerHead has you covered.
API REAMERS CROSSOVER SUB ADAPTERS
TAB
BACK OF TAB
API REAMERS, CROSSOVER SUB /
ADAPTERS & COMPETITIVE STARTER RODS
Decal Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Adapter Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Crossover Subs / Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Competitor Starter Rods / Torque Rating Chart . . . . . . . . . . . . . . . .37
23
Adapter Options
24
Adapter Options
Hawkeye
Hex Collar
Splinelok
Threaded
25
API REAMER & CROSSOVER SUBS/ADAPTERS
CROSSOVER SUBS/ADAPTERS
KEY
HEX = low-profile HEX connection
SPLK II = 6 PIN SPLK
(B) = Box or Female
(P) = Pin or Male
1.625" (4.1 cm) HEX = D4x6, D7x11, D7x11A, D7x11 Series II, D9x13 Series II, D10x15
2.125" (5.4 cm) HEX = D16x20 Series II, D24x40, D24x40A, D24x40 Series II, D40x40
1.66" (4.2 cm) FST I #200 = D6X6, D9x13 Series II, D10X15
1.9" (4.8 cm) FST I #250 = D16X20 Series II, D18X22
2.06" (5.2 cm) FST I #400 = D20X22 Series II, D20x22FX Series II, D24X26
2.375" (6 cm) FST I #600 = D24X40 Series II, D24X40A, D24X40 Series II
2.375" (6 cm) FST I #650 = D36x50 Series II, D40X40, D33X44
2.625" (6.7 cm) FST I #700 = D36X50 Series II
2.875" (7.3 cm) FST I #900 = D50X100
3.5" (8.9 cm) FST I #800 = D80X100, D80X100 Series II
3.5" (8.9 cm) FST I #1000 = D100X120, D100X120 Series II
1.625" (4.1 cm) LPT/HEX (B) - (D4x6 - D10x15)
Part #
Description
246921001
1.5" (3.8 cm) UNC (P)
289401001
2.375" (6 cm) API REG (B)
289402001
2.375" (6 cm) API REG (P)
240895001
1.90" (4.8 cm) FST #250 (B) STARTER ROD
API X ITS / HEX ADAPTER
ITS / HEX ADAPTER
1.625" (4.1 cm) LPT/HEX (P) - (D4x6 - D10x15)
Part #
Description
227681001
1.5" (3.8 cm) UNC HEX (B)
284019001
2" (5.1 cm) UNC HEX (B)
296337283
1.625" (4.1 cm) LPT/HEX (P) WELDOVER
280086001
2.125" (5.4 cm) LPT/HEX (B)
296328298
2.375" (6 cm) FST #600 (P)
289400001
2.375" (6 cm) API REG (P)
296312611
DW 520 1.21 (B)
296337436
DW 1720 / 1720M1 1.81 (P)
REPLACEMENT SPUD - 1.625" (4.1 cm)
Part #
Description
227743001
FLUTED SPUD
227741001
SPIRAL SPUD
1.66" (4.2 cm)
Part #
296344013
296312639
296337438
296344014
FST #200 (B) - (D4x6 - D10x15)
Description
2-4 3G ACME(P)
2.06" (5.2 cm) FST #400 (P)
2.375" (6 cm) API REG (B)
DW EZ2 2.00 (P)
1.66" (4.2 cm)
Part #
296344016
296312638
FST #200 (P) - (D4x6 - D10x15)
Description
1.375" (3.5 cm) UNC-6(B)
2.06" (5.2 cm) FST #400 (B)
26
FLUTED SPUD
SPIRAL SPUD
API BOX
1.90" (4.8 cm)
Part #
296312636
296312645
296312646
296337458
FST #250 (B) - (D16x20 SERIES II - D20x22 SERIES II)
Description
2.06" (5.2 cm) FST #400 (P)
2.125" (5.4 cm) LPT/HEX (P)
2.375" (6 cm) API REG (P)
DW EZ2 2.00 (B)
2.06" (5.2 cm)
Part #
296312638
296337491
296344017
296344018
296312656
296328451
296312644
296312661
296344019
296337460
FST #400 (B) - (D18x22 - D24x26)
Description
1.66" (4.2 cm) FST #200 (P)
2.06" (5.2 cm) FST #400 (P) - 6.50" (16.5 cm) OAL
2.375" (6 cm) FST #600 (P)
2.375" (6 cm) API REG (P)
2.375" (6 cm) API REG (B)
2.375" (6 cm) API REG (P)
2.875" (7.3 cm) API REG (P)
3.50" (8.9 cm) FST #800 (P
3.50" (8.9 cm) API REG (B)
DW EZ2 2.00 (B)
2.06" (5.2 cm)
Part #
296337491
296312635
296312636
296312639
FST #400 (P) - (D18x22 - D24x26)
Description
2.06" (5.2 cm) FST #400 (B) - 6.50" (16.5 cm) OAL
2.125" (5.4 cm) LPT/HEX (P)
1.9" (4.8 cm) FST #250 (B)
1.66" (4.2 cm) FST #200 (B)
FIRESTICK
SPLINELOK II
2.125" (5.4 cm) LPT/HEX (B) - (D16x20 SERIES II - D40x40)
Part #
Description
246926001
2" (5.1 cm) COURSE HEX (P)
280086001
2.125" (5.4 cm) LPT/HEX (B)
234945001
1.66" (4.2 cm) FST #200 (B)
296312626
2.375" (6 cm) API REG (B) WELDOVER
289404001
2.375" (6 cm) API REG (P)
289405001
2.375" (6 cm) API REG (B)
289407001
2.875" (7.3 cm) API REG (P)
289408001
2.875" (7.3 cm) API REG (B)
296312659
3.50" (8.9 cm) FST #800 (B)
296337471
DW 1720 / 1720M1 1.81(P)
296344020
DW 1220M1 / 2020M1 / 2720 1.94 (B)
296344021
DW 1220M1 / 2020M1 / 2720 1.94 (P)
API PIN
27
2.125" (5.4 cm) LPT/HEX (P) - (D16x20 SERIES II - D40 x 40)
Description
Part #
234773001
2" (5.1 cm) COURSE HEX (B)
296344022
1.625" (4.1 cm) LPT/HEX (B)
296337282
296312645
1.90" (4.8 cm) FST #250 (B)
296312635
2.06" (5.2 cm) FST #400 (P)
296337401
2.375" (6 cm) FST #600 (P) - 9.50" (24.1 cm) OAL
296312590
2.375" (6 cm) FST #600 (P) - 16" (40.6 cm) OAL
296337461
2.375" (6 cm) FST #650 (B)
296279067
2.375" (6 cm) API REG (P) - 3" (7.6 cm) OD - SHORT
296258005
2.375" (6 cm) API REG (P) - 3.25" (8.3 cm) OD - LONG
289403001
2.375" (6 cm) API REG (P) - 3.5" (8.9 cm) OD
296312637
2.375" (6 cm) API IF (P)
281473001
2.875" (7.3 cm) FST #900 (P)
296337448
2.875" (7.3 cm) API REG (B) WELDOVER
289406001
2.875" (7.3 cm) API REG (P)
296312610
2.875" (7.3 cm) API IF (P)
296337459
3.50" (8.9 cm) FST #800 (B) WELDOVER
281472001
3.50" (8.9 cm) FST #800 (P)
296312621
3.50" (8.9 cm) FST #800 (B)
296344023
3.50" (8.9 cm) FST #1000 (P)
296312604
3.50" (8.9 cm) API REG (P)
296344024
DW 1220M1 / 2020M1 / 2720 1.94 (B)
296344025
DW 1220M1 / 2020M1 / 2720 1.94 (P)
296344026
DW EZ2 2.00 (B)
296337411
DW EZ2 2.00 (P)
296344027
DW 4020 2.40 (B)
296328453
DW 4020 2.52 (P)
296344028
DW EZ2 2.63 (P)
REPLACEMENT SPUDS
Part #
Description
227676001
FLUTED SPUD - 2.125" (5.4 cm) (P)
227675001
SPIRAL SPUD - 2.125" (5.4 cm) (P)
296258204
FLUTED SPUD - 2.375" (6 cm) API REG (B)
2.375" (6 cm)
Part #
296328359
296328324
296344029
296255402
296344030
296328331
296328310
296337451
296312660
296255403
296337430
296328325
296328381
296337453
28
FST #600 (B) - (D24x40 SERIES II)
Description
2.375" (6 cm) FST #600 (P)
2.375" (6 cm) FST #600 (B)
2.375" (6 cm) FST #650 (P)
2.375" (6 cm) API REG (P)
2.375" (6 cm) API REG (B)
2.375" (6 cm) API IF (P)
2.375" (6 cm) API IF (B)
2.625" (6.7 cm) FST #700 (B) - 18" (45.7 cm) OAL
2.875" (7.3 cm) FST #900 (P)
2.875" (7.3 cm) API REG (P)
2.875" (7.3 cm) API REG (P) - 24.21" (61.5 cm) OAL
2.875" (7.3 cm) API IF (P)
3.50" (8.9 cm) FST #800 (P)
3.50" (8.9 cm) FST #800 (B) - 18" (45.7 cm) OAL
FIRESTICK
FLUTED SPUD
SPIRAL SPUD
API PIN
2.375" (6 cm)
Part #
296337462
296328402
296344031
296344032
FST #600 (B) - (D24x40 SERIES II) - contintued
Description
3.50" (8.9 cm) API REG (B)
3.50" (8.9 cm) API IF (P)
DW 1720 / 1720M1 1.81(P)
DW 1220M1 / 2020M1 / 2720 1.94 (P)
2.375" (6 cm)
Part #
296328298
296337401
296312590
296344017
296328359
296328350
296344034
296344035
296344036
296312614
296328326
296344037
296312705
FST #600 (P) - (D24x40 SERIES II)
Description
1.625" (4.1 cm) LPT/HEX (P)
2.125" (5.4 cm) LPT/HEX (P) - 9.50" (24.1 cm) OAL
2.125" (5.4 cm) LPT/HEX (P) - 16" OAL
2.06" (5.2 cm) FST #400 (B)
2.375" (6 cm) FST #600 (B)
2.375" (6 cm) FST #650 (B)
2.375" (6 cm) API REG (P)
2.375" (6 cm) API REG (B)
2.375" (6 cm) API IF (B)
2.625" (6.7 cm) FST #700 (B)
2.875" (7.3 cm) API IF (B)
3.50" (8.9 cm) FST #800 (P)
3.50" (8.9 cm) FST #800 (B)
2.375" (6 cm)
Part #
296337461
296328350
296328272
296328270
296328452
296312698
296328366
296344038
296344039
296312699
296328284
296344040
296344041
FST #650 (B) - (D33x44 - D36x50 SERIES II)
Description
2.125" (5.4 cm) LPT/HEX (P)
2.375" (6 cm) FST #600 (P)
2.375" (6 cm) FST #650 (B)
2.375" (6 cm) FST #650 (P)
2.375" (6 cm) API REG (P)
2.375" (6 cm) API REG (B)
2.625" (6.7 cm) FST #700 (P)
2.875" (7.3 cm) API REG (P)
2.875" (7.3 cm) API IF (P)
3.50" (8.9 cm) FST #800 (P)
3.50" (8.9 cm) API REG (B)
DW 1220M1 / 2020M1 / 2720 1.94 (P)
DW 4020 2.40 (B)
2.375" (6 cm)
Part #
296344042
296328270
296328445
296344043
FST #650 (P) - (D33x44 - D36x50 SERIES II)
Description
2.375" (6 cm) FST #600 (B)
2.375" (6 cm) FST #650 (B)
2.625" (6.7 cm) FST #700 (B)
3.50" (8.9 cm) FST #800 (B)
2.375" (6 cm)
Part #
296312707
296312624
296344044
296344045
API REG (B)
Description
2.375" (6 cm) API REG (B)
2.875" (7.3 cm) API REG (P)
2.875" (7.3 cm) API IF (B)
DW EZ2 2.00 (P)
API
HEX
SPLINELOK II WELDOVER
29
API & CROSSOVER SUBS/ADAPTERS
2.375" (6 cm) API REG (P)
Description
Part #
296344046
DW 4020 2.40 (P)
2.625" (6.7 cm) FST #700 (B) - (D36x50 Seires II)
Part #
Description
296312614
2.375" (6.9 cm) FST #600 (P)
296337451
2.375" (6.9 cm) FST #600 (B) - 18" (45.7 cm) OAL
296328445
2.375" (6.9 cm) FST #650 (P)
296312615
2.375" (6.9 cm) API REG (P)
296312686
2.375" (6.9 cm) API REG (B)
296312612
2.375" (6.9 cm) API IF (P)
296344047
2.625" (6.7 cm) FST #700 (B)
296328336
2.875" (7.3 cm) API REG (P)
296337431
2.875" (7.3 cm) API REG (B)
296344048
2.875" (7.3 cm) API IF (P)
296312613
3.50" (8.9 cm) FST #800 (P)
296328329
3.50" (8.9 cm) API REG (B)
2.625" (6.7 cm) FST #700 (P) - (D36x50 - D36x50 SERIES II)
Part #
Description
296328366
2.375" (6.9 cm) FST #650 (B)
296312653
2.375" (6.9 cm) API IF (B)
296312651
2.625" (6.7 cm) FST #700 (B)
296344049
2.875" (7.3 cm) API REG (P)
296312652
3.50" (8.9 cm) FST #800 (B)
HEX X DW
SPLINELOK II x API
2.875" (7.3 cm) FST #900 (B) - (D50x100 - D80x100 SERIES II)
Part #
Description
296312603
2.375" (6 cm) API REG (P)
296337363
2.875" (7.3 cm) API REG (P) - 6" (15.2 cm) OAL
289432001
2.875" (7.3 cm) API REG (P) - 24.88" (63.2 cm) OAL
296312620
2.875" (7.3 cm) API REG (B)
246912001
3.50" (8.9 cm) FST #800 (P)
296312598
3.50" (8.9 cm) FST #1000 (P)
289435001
3.50" (8.9 cm) API REG (P)
296344050
3.50" (8.9 cm) API IF (P)
296344051
DW 4020 2.40 (P)
296344052
DW 4020 M1 / 4020 AT - 2.59 (P)
2.875" (7.3 cm) FST #900 (P) - (D50x100 - D80x100 SERIES II)
Part #
Description
281473001
2.125" (5.4 cm) LPT/HEX (P)
296312660
2.375" (6 cm) FST #600 (B)
296312702
2.875" (7.3 cm) FST #900 (P)
289430001
2.875" (7.3 cm) API REG (P)
296328281
2.875" (7.3 cm) API REG (B) - 8" (20.3 cm) OAL
289431001
2.875" (7.3 cm) API REG (B)- 12.75" (32.4 cm) OAL
296312602
3.50" (8.9 cm) FST #800 (B) - 8" (20.3 cm) OAL
246911001
3.50" (8.9 cm) FST #800 (B) - 28" (71.1 cm) OAL
296312596
3.50" (8.9 cm) FST #1000 (B)
289433001
3.50" (8.9 cm) API REG (P)
289434001
3.50" (8.9 cm) API REG (B)
30
SPLINELOK II x HEX
2.875" (7.3 cm) API REG (B)
Part #
Description
2.375" (6.9 cm) API REG (P)
296312640
296328265
2.875" (7.3 cm) API IF (P)
296328368
3.50" (8.9 cm) API REG (P)
296312680
3.50" (8.9 cm) API IF (P)
2.875" (7.3 cm) API REG (P)
Part #
Description
296312624
2.375" (6.9 cm) API REG (B)
296312632
2.875" (7.3 cm) API REG (P)
296312625
2.875 (7.3 cm) API IF (B)
296312609
3.50" (8.9 cm) API REG (P)
296337399
DW EZ2 2.63 (B) 4020/4020MI
2.875" (7.3 cm) API IF (B)
Part #
Description
296312649
X BLANK
296312625
2.875" (7.3 cm) API REG (P)
2.875" (7.3 cm) API IF (P)
Part #
Description
296328276
3.50" (8.9 cm) API REG (B)
296328265
2.875" (7.3 cm) API REG (B)
296312703
2.875" (7.3 cm) API IF (P)
3.50" (8.9 cm)
Part #
296337459
296312621
296312659
296337453
296312705
296328294
296337428
296312652
296312602
246911001
296257929
289438001
296312650
296312631
296337437
296312643
296312597
296312655
296312589
289441001
296312647
296312593
296344053
296344054
Description
2.125" (5.4 cm) LPT/HEX (P)
2.125" (5.4 cm) LPT/HEX (B)
2.375" (6 cm) FST #600 (B) - 18" (45.7 cm) OAL
2.375" (6 cm) FST #600 (P)
2.375" (6 cm) API REG (P)
2.375" (6 cm) API IF (P)
2.625" (6 cm) FST #700 (P)
2.875" (7.3 cm) FST #900 (P) - 8" (20.3 cm) OAL
2.875" (7.3 cm) FST #900 (P) - 28" (71.1 cm) OAL
2.875" (7.3 cm) API REG (P) - 6.13" (15.6 cm) OAL
2.875" (7.3 cm) API REG (P) - 24.88" (63.2 cm) OAL
2.875" (6 cm) API IF (P)
3.50" (8.9 cm) FST #800 (B) - 8" (20.3 cm) OAL
3.50" (8.9 cm) FST #800 (P) - 30" (76.2 cm) OAL
3.50" (8.9 cm) FST #1000 (B)
3.50" (8.9 cm) FST #1000 (P)
3.50" (8.9 cm) API REG (B)
3.50" (8.9 cm) API REG (P) - 9.81" (24.9 cm) OAL
3.50" (8.9 cm) API REG (P) - 25" (63.5 cm) OAL
3.50" (8.9 cm) API IF (P)
4.50" (11.4 cm) API IF (P)
DW EZ2 2.00 (P)
DW 4020 2.40 (P)
SPLINELOK II SPIRAL SPUD
SPLINELOK II FLUTED SPUD
31
3.50" (8.9 cm)
Part #
281472001
296312661
296328381
296312699
296337429
296312613
246912001
289437001
289436001
296328277
296328285
296337437
296312586
296328354
289440001
296312648
296312641
296312642
Description
2.125" (5.4 cm) LPT/HEX (P)
2.06" (5.2 cm) FST #400 (B)
2.375" (6 cm) FST #600 (B)
2.375" (6 cm) FST #650 (B)
2.375" (6 cm) API IF (B)
2.625" (6.7 cm) FST #700 (B)
2.875" (7.3 cm) FST #900 (B)
2.875" (7.3 cm) API REG (B)
2.875" (7.3 cm) API REG (P)
2.875" (7.3 cm) API IF (B)
3.50" (8.9 cm) FST #800 (P)
3.50" (8.9 cm) FST #800 (B) - 30" (76.2 cm) OAL
3.50" (8.9 cm) FST #1000 (B)
3.50" (8.9 cm) API REG (P) - 8.56" (21.7 cm) OAL
3.50" (8.9 cm) API REG (B)
3.50" (8.9 cm) API IF (B)
4.50" (11.4 cm) API IF (B)
4.50" (11.4 cm) API IF (P)
3.50" (8.9 cm)
Part #
296328342
296312596
296312587
296312617
296312616
296312643
296312586
296328315
296312607
296312588
296312634
296312618
296312585
296312658
296344055
Description
2.375" (6 cm) API IF (P)
2.875" (7.3 cm) FST #900 (P)
2.875" (7.3 cm) API REG (P) - 6.13" (15.6 cm) OAL
2.875" (7.3 cm) API REG (P) - 16" (40.6 cm) OAL
2.875" (7.3 cm) API IF (P)
3.50" (8.9 cm) FST #800 (B)
3.50" (8.9 cm) FST #800 (P)
3.50" (8.9 cm) FST #1000 (B)
3.50" (8.9 cm) API REG (B)
3.50" (8.9 cm) API REG (P) - 6.13" (15.6 cm) OAL
3.50" (8.9 cm) API REG (P) - 28" (71.1 cm) OAL
3.50" (8.9 cm) API IF (P)
4.50" (11.4 cm) API IF (P)
4.50" (11.4 cm) API IF (B)
DW 7020M1 / 8020M1 3.27 (P)
3.50" (8.9 cm)
Part #
296312598
296328450
296312600
296312633
296337400
296312597
296328316
296312599
296312601
296328341
296328338
296312619
Description
2.875" (7.3 cm) FST #900 (B)
2.875" (7.3 cm) API REG (B)
2.875" (7.3 cm) API REG (P)
2.875" (7.3 cm) API IF (B)
2.875" (7.3 cm) API IF (P)
3.50" (8.9 cm) FST #800 (B)
3.50" (8.9 cm) FST #1000 (P)
3.50" (8.9 cm) API REG (B)
3.50" (8.9 cm) API REG (P)
3.50" (8.9 cm) API IF (B)
3.50" (8.9 cm) API IF (P)
4.50" (11.4 cm) API IF (B)
32
FIRESTICK
FIRESTICK
FIRESTICK
3.50" (8.9 cm)
Part #
296328276
296312654
296328317
296312595
296312606
API REG (B)
Description
2.875" (7.3 cm) API IF (P)
3.50" (8.9 cm) API IF (P)
3.50" (8.9 cm) API REG (B)
4.50" (11.4 cm) API IF (P)
4.50" (11.4 cm) API IF (B)
3.50" (8.9 cm)
Part #
296312609
296328368
296328278
296312657
296312594
296337427
API REG (P)
Description
2.875" (7.3 cm) API REG (P)
2.875" (7.3 cm) API REG (B)
3.50" (8.9 cm) API REG (P)
3.50" (8.9 cm) API IF (P)
4.50" (11.4 cm) API IF (B)
DW 7020M1 / 8020M1 3.27 (P)
3.50" (8.9 cm)
Part #
296328341
296312648
API IF (B)
Description
3.50" (8.9 cm) FST #1000 (P)
3.50" (8.9 cm) FST #800 (P)
3.50" (8.9 cm)
Part #
296328402
296312680
296312647
296312618
296328338
296312654
296312657
296312662
API IF (P)
Description
2.375" (6 cm) FST #600 (B)
2.875" (7.3 cm) API REG (B)
3.50" (8.9 cm) FST #800 (B)
3.50" (8.9 cm) FST #1000 (B)
3.50" (8.9 cm) FST #1000 (P)
3.50" (8.9 cm) API REG (B)
3.50" (8.9 cm) API REG (P)
4.50" (11.4 cm) API IF (B)
4.50" (8.9 cm)
Part #
296312641
296312619
296312658
296312594
296312606
296312662
296312605
296337457
296312628
296312592
296312591
296337455
296337469
API IF (B)
Description
3.50" (8.9 cm) FST #800 (P)
3.50" (8.9 cm) FST #1000 (P)
3.50" (8.9 cm) FST #1000 (B)
3.50" (8.9 cm) API REG (P)
3.50" (8.9 cm) API REG (B)
3.50" (8.9 cm) API IF (P)
4.50" (11.4 cm) API IF (B)
4.50" (11.4 cm) API REG (P)
4.50" (11.4 cm) API IF (P) - 10" (25.4 cm) OAL
5.50" (14 cm) API FH (P)
6.625" (16.9 cm) API REG (P)
6.625" (16.8 cm) API IF (P)
6.625" (16.8 cm) API FH (P)
API PIN
API BOX
FIRESTICK
33
4.50" (8.9 cm)
Part #
296344056
296312642
296312593
296312585
296312595
296312628
296275611
296312630
296312608
296337456
296344057
296337470
API IF (P)
Description
2.875" (7.3 cm) API IF (B)
3.50" (8.9 cm) FST #800 (P)
3.50" (8.9 cm) FST #800 (B)
3.50" (8.9 cm) FST #1000 (B)
3.50" (8.9 cm) API REG (B)
4.50" (11.4 cm) API IF (B) - 10" (25.4 cm) OAL
5.50" (14 cm) API FH (B)
5.50" (14 cm) API FH (B)
6.625" (16.8 cm) API REG (B)
6.625" (16.8 cm) API IF (B)
6.625" (16.8 cm) API FH (P)
6.625" (16.8 cm) API FH (B)
5.50" (14 cm)
Part #
296312630
296275611
296312629
296312627
API FH (B)
Description
4.50" (11.4 cm) API IF (P) - 12.5" (31.8 cm) OAL
4.50" (11.4 cm) API IF (P) - 16" (40.6 cm) OAL
6.625" (16.8 cm) API FH (P) - 12.5" (31.8 cm) OAL
6.625" (16.8 cm) API FH (P) - 16.5" (41.9 cm) OAL
FIRESTICK
5.50" (14 cm) API FH (P)
Part #
Description
296312592
4.50" (11.4 cm) API IF (B)
6.625" (16.8 cm) API REG (B)
Part #
Description
296312608
4.50" (11.4 cm) API IF (P)
296259053
6.625" (16.8 cm) API REG (P)
API PIN
6.625" (16.8 cm) API REG (P)
296312591
4.50" (11.4 cm) API IF (B)
6.625" (16.8 cm) API IF (B)
Part #
Description
296337456
4.50" (11.4 cm) API IF (P)
6.625" (16.8 cm) API IF (P)
Part #
Description
296337455
4.50" (11.4 cm) API IF (B)
6.625" (16.8 cm) API FH (B)
Part #
Description
296337470
4.50" (11.4 cm) API IF (P)
6.625" (16.8 cm) API FH (P)
Part #
Description
296337469
4.50" (11.4 cm) API IF (B)
296312629
5.50" (14 cm) API FH (B) - 7.6" (19.3 cm) OAL
296312627
5.50" (14 cm) API FH (B) - 11.5" (29.2 cm) OAL
34
API BOX
HAWKEYE 275 (P)
Part #
Description
1.625" (4.1 cm) LPT/HEX (B)
296312665
296309450
296312666
2.125" (5.4 cm) LPT/HEX (B)
296309461
296309448
2.375" (6 cm) API REG (P)
296309449
2-4 3G ACME (P)
296312667
3.50" (8.9 cm) SPL II (P)
296309465
OEM WELDOVER
ITS / HEX ADAPTER
HAWKEYE 350 (P)
Part #
Description
296312668
1.625" (4.1 cm) LPT/HEX (B)
296312663
2.125" (5.4 cm) LPT/HEX (B)
296309384
296309383
2.375" (6 cm) API REG (P)
296312669
3.50" (8.9 cm) SPL II (P)
296309392
HOUSING RETRO-FIT
296309385
OEM WELD-ON
HAWKEYE 390 (P)
Part #
Description
296339041
1.625" (4.1 cm) LPT/HEX (B)
296339042
2.125" (5.4 cm) LPT/HEX (B)
296331749
2.125" (5.4 cm) LPT/HEX (P)
296331748
2.375" (6 cm) API REG (P)
296331740
2.875" (7.3 cm) API REG (P)
296339043
3.50" (8.9 cm) SPL II (P)
296331741
OEM WELD-ON
HAWKEYE 426 (P)
Part #
Description
296312670
1.625" (4.1 cm) LPT/HEX (B)
296312671
2.125" (5.4 cm) LPT/HEX (B)
296309397
296309396
2.375" (6 cm) API REG (P)
296309398
2.875" (7.3 cm) FST #900 (P)
296309418
2.875" (7.3 cm) API REG (P)
296309394
3.50" (8.9 cm) FST #800 (P)
296309419
3.50" (8.9 cm) API REG (P)
296312664
3.50" (8.9 cm) SPL II (P)
296309420
OEM WELD-ON
FLUTED SPUD
SPIRAL SPUD
35
3.50" (8.9 cm)
Part #
289396001
284955001
289312001
296260181
289417001
296266215
289420001
296253204
296260221
296260229
296260228
296260220
296260219
SPL II (B)
Description
X BLANK
2.125" (5.4 cm) LPT/HEX (B)
2.125" (5.4 cm) LPT/HEX (B) WELDOVER
2.375" (6 cm) FST #600 (P)
2.375" (6 cm) API REG (P)
2.875" (7.3 cm) FST #900 (P)
2.875" (7.3 cm) API REG (P)
3.50" (8.9 cm) FST #800 (P)
3.50" (8.9 cm) API REG (P)
DW 1720 (B)
DW 1720 (P)
DW 2720 (B)
DW 2720 (P)
3.50" (8.9 cm)
Part #
289397001
284956001
289415001
289416001
289418001
289419001
SPL II (P)
Description
X BLANK
2.125" (5.4 cm) LPT/HEX (P)
2.375" (6 cm) API REG (P)
2.375" (6 cm) API REG (B)
2.875" (7.3 cm) API REG (P)
2.875" (7.3 cm) API REG (B)
COMPETITOR
Part #
296268775
296254904
296257906
296257912
290553001
296260230
296260218
STARTER ROD
Description
1.625" (4.1 cm) LPT/HEX (B) x DW 920 (P)
2.125" (5.4 cm) LPT/HEX (B) x DW 1720 (P)
2.125" (5.4 cm) LPT/HEX (B) x DW 2720 (P)
2.125" (5.4 cm) LPT/HEX (P) x DW 2720 (B)
2.375" (6 cm) API REG (P) x DW 2720 (P)
3.50" (8.9 cm) SPL II (P) x DW 1720 (P)
3.50" (8.9 cm) SPL II (P) x DW 2720 (P)
36
HEX X DW
SPLINELOK II x API
DITCH WITCH
Part #
296312611
296337436
296344014
296337458
296337460
296337471
296344020
296344021
296344024
296344025
296344026
296337411
296344027
296328453
296344028
296344031
296344032
296344040
296344041
296344045
296344046
296337399
296344051
296344052
296344053
296344054
296344055
296337427
ADAPTERS
Description
DW 520 1.21 (B) X 1.625" (4.1 cm) LPT/HEX (P)
DW 1720 / 1720M1 1.81 (P) x 1.625" (4.1 cm) LPT/HEX (P)
DW EZ2 2.00 (P) X 1.66" (4.2 cm) FST #200 (B)
DW EZ2 2.00 (B) X 1.9" (4.8 cm) FST #250 (B)
DW EZ2 2.00 (B) X 2.06" (5.2 cm) FST #400 (B)
DW 1720 / 1720M1 1.81(P) X 2.125" (5.4 cm) LPT/HEX (B)
DW 1220M1 / 2020M1 / 2720 1.94 (B) X 2.125" (5.4 cm) LPT/HEX (B)
DW 1220M1 / 2020M1 / 2720 1.94 (P) X 2.125" (5.4 cm) LPT/HEX (B)
DW 1220M1 / 2020M1 / 2720 1.94 (B) X 2.125" (5.4 cm) LPT/HEX (P)
DW 1220M1 / 2020M1 / 2720 1.94 (P) X 2.125" (5.4 cm) LPT/HEX (P)
DW EZ2 2.00 (B) X 2.125" (5.4 cm) LPT/HEX (P)
DW EZ2 2.00 (P) X 2.125" (5.4 cm) LPT/HEX (P)
DW 4020 2.40 (B) X 2.125" (5.4 cm) LPT/HEX (P)
DW 4020 2.52 (P) X 2.125" (5.4 cm) LPT/HEX (P)
DW EZ2 2.63 (P) X 2.125" (5.4 cm) LPT/HEX (P)
DW 1720 / 1720M1 1.81(P) X 2.375" (6 cm) FST #600 (B)
DW 1220M1 / 2020M1 / 2720 1.94(P) X 2.375" (6 cm) FST #600 (B)
DW 1220M1 / 2020M1 / 2720 1.94(P) X 2.375" (6 cm) FST #650 (B)
DW 4020 2.40 (B) X 2.375" (6 cm) FST #650 (B)
DW EZ2 2.00 (P) X 2.375" (6 cm) API REG (B)
DW 4020 2.40 (P) X 2.375" (6 cm) API REG (P)
DW EZ2 2.63 (B) 4020/4020MI X 2.875" (7.3 cm) API REG (P)
DW 4020 2.40 (P) X 2.875" (7.3 cm) FST #900 (B)
DW 4020 M1 / 4020 AT - 2.59 (P) X 2.875" (7.3 cm) FST #900 (B)
DW EZ2 2.00 (P) x 3.50" (8.9 cm) FST #800 (B)
DW 4020 2.40 (P) X 3.50" (8.9 cm) FST #800 (B)
DW 7020M1 / 8020M1 3.27 (P) X 3.50" (8.9 cm) FST #1000 (B)
DW 7020M1 / 8020M1 3.27 (P) X 3.50" (8.9 cm) API REG (P)
API CONNECTION
SPLINELOK II x HEX
API PIN
MIN. MAKEUP TORQUE
MAX. OPERATING TORQUE
2.375" (6 cm) API regular
1560 ft-lb (2115.1 Nm)
2600 ft-lb (3525.1 Nm)
2.875" (7.3 cm) API regular
3000 ft-lb (4067.5 Nm)
5000 ft-lb (6779.1 Nm)
3.5" (8.9 cm) API regular
7200 ft-lb (9761.9 Nm)
12,000 ft-lb (16,269.8 Nm)
3.5" (8.9 cm) IF
14730 ft-lb (19,971.2 Nm)
24,551 ft-lb (33,286.7 Nm)
4.5" (11.4 cm) IF
31,341 ft-lb (42,492.7 Nm)
52,235 ft-lb (70,821.2 Nm)
4.5" (11.4 cm) X HOLE
25,421 ft-lb (34,466.2 Nm)
40,418 ft-lb (54,799.5 Nm)
5.5" (14 cm) IF
34,596 ft-lb (46,905.9 Nm)
57,661 ft-lb (78,177.8 Nm)
6.625" (16.8 cm) IF
57,057 ft-lb (77,358.9 Nm)
95,095 ft-lb (128,931.5 Nm)
6.625" (16.8 cm) FH
48,321 ft-lb (65,514.5 Nm)
80,535 ft-lb (109,190.8 Nm)
Based on 10 ksi yield min material
37
38
COMPACT HDD
TOOLING
TAB
BACK OF
TAB
COMPACT
HDD TOOLING
D6x6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
D7x11, D7x11A, D7x11A QS, D7X11 Series II, D9x13 Series II . . . . .43
D10x14, D10x15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Compact HDD Bits for D6x6 - D10x15 . . . . . . . . . . . . . . . . . . . . . . . .49
Compact HDD API Reamers for D6x6 - D10x15 . . . . . . . . . . . . . . . .52
Compact HDD Vermeer Connection Reamers . . . . . . . . . . . . . . . . . .55
Compact HDD Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
41
COMPACT HDD
D6x6
The curb-to-home solution. The D6x6 Navigator HDD
machine features a convenient onboard water pump, as
well as the smallest footprint in its class. Its compact size
makes it ideal for maneuvering through tight areas and
installing small-diameter product.
See the Tool Applications section for usage
recommendations.
DRILL STEM
Part #
222394001
STARTER ROD
Part #
276261001
Description
1.32" (3.4 cm) FST I #200 X 6’ (1.8 m)
Description
STARTER ROD [1.625" (4.1 cm) HEX - 20" (50.8 cm)] X
1.32"/1.66" (3.4 cm/4.2 cm) FST I #200 (B)
FIRESTICK DRILL STEM
STARTER ROD
STARTER ROD HAWKEYE
Part #
Description
296309452
STARTER ROD ASS'Y - HAWKEYE 275 (B) X 1.66" (4.1 cm)
FST I #200 (B)
DRILL HEADS AND ACCESSORIES
Part #
Description
296343209
2" (5.1 cm) ENDLOAD MINI HOUSING X 1.66" (4.2 cm) FST 200
BOX
296343208
FRONT SUB-MINI HEAD ASS’Y
296274010
2.25" (5.7 cm) OD ENDLOAD HOUSING X 1.66" (4.2 cm) FST 200
BOX (Standard Sonde)
262488001
FRONT BIT SUB ASS’Y (FOR 296274010)
234786001
2.75" (7 cm) OD SIDELOAD HOUSING X 1.625" (4.1 cm) HEX PIN
296281894
SONDE LID (FOR 234786001)
141064001
LID BOLT
296255555
O-RING 1.63" (4.1 cm)
262394001
2.75" (7 cm) OD SIDELOAD HOUSING X 2-4 ACME BOX
262391001
230868001
LID BOLT (FOR 262394001)
296351784
2.75" (7 cm) OD SUBSITE SIDELOAD HOUSING X 2-4 ACME BOX
296260055
5544004
SONDE CLOCKING BOLT (FOR 296351784)
296309449
ADAPTER ASS'Y - HAWKEYE 275 (P) X 2-4 ACME PIN
4478003
LID RETAINER BOLT
296279190
NOZZLE
262392001
ADAPTER - 1.625" (4.1 cm) (P) x 2 - 4 ACME (P)
42
HAWKEYE STARTER ROD
DIRT HEAD
COMPACT HDD
D7x11, D7x11A, D7x11A QS, D7x11 Series II, D9x13 SERIES II
An ideal solution for utility contractors installing smalldiameter products. The D7x11A, D7X11 Series II and
D9x13 Series II Navigator HDD machines feature a
convenient onboard water pump (non-QS models), and
the smallest footprint in its class. Its compact size makes
it ideal for maneuvering through tight areas.
This model is no longer in production.
Tooling is still available.
See the Tool Applications section for usage
recommendations.
DRIVE CHUCK
Part #
216453001
296255361
296255351
247261985
296276507
DRILL STEM
Part #
222394001
216492001
249242001
249243001
Description
1.32"/1.66" (3.4 cm/4.2 cm) FST I #200 - One piece
1.32"/1.66" (3.4 cm/4.2 cm) FST I #200 with SUB SAVER
1.66" (4.2 cm) FST I #200 SUB SAVER
TORQ-LOK
1.66" (4.2 cm) FST I #200 SUB SAVER - D7x11 SERIES II
Description
1.32" (3.4 cm) FST I #200 X 6’ (1.8 m)
1.66" (4.2 cm) FST I #200 X 6’ (1.8 m)
UPSET GAUGE — FST I 1.32" (3.4 cm)
UPSET GAUGE — FST I 1.66" (4.2 cm)/FST I 1.88" (4.8 cm)
STARTER ROD HEX
Part #
Description
276261001
1.63" (4.1 cm) - 20" (51 cm) HEX X 1.66" (4.2 cm) FST I #200 (B)
234764001
2" (5 cm) STD HEX COLLAR
289274001
2" (5 cm) LONG HEX COLLAR with HOLE AND HARDFACE
296343245
HEX COLLAR 1.625" (4.1 cm) WITH HARDFACE AND SHARK
TEETH
4478003
CAPSCREW — .375" (1 cm)/16 X .375" (1 cm)
234945001
HEX 2.125" (5.4 cm) X #200 X 1.66" (4.2 cm) FST I #200
DRIVE CHUCK
TORQ-LOK
SUB SAVER
UPSET GAUGES
STARTER ROD
(To use with D24x40 tools)
240591001
281393001
CAPSCREW — .50" (1.3 cm)/13 X .50" (1.3 cm)
1.375" (3.5 cm) X .625" (1.6 cm) X .375" (1 cm) SEAL WASHER
FOR HEX COLLAR
STARTER RODS (Do not use with TriHawk drill heads.)
STARTER ROD HAWKEYE
Part #
Description
296309452
STARTER ROD ASS'Y - HAWKEYE 275 (B) X 1.66 FST I #200 (B)
296309460
TORQUE SLEEVE - HAWKEYE 275
296309457
BOLT - SHCS 3/8-16- X .38
296309458
NOZZLE - HAWKEYE 275, 3/8-16 X .25
296309459
PLUG - HAWKEYE 275 3/8 - 16 X .25
296309462
O-RING 121
STARTER ROD SPLINELOK
Part #
Description
272462001
3.5" (8.9 cm) SPL II (P) X 1.66" (4.2 cm) FST I #200 (B)
HEX COLLARS
HAWKEYE STARTER ROD
SPLINELOK II
43
COMPACT HDD
D7x11, D7x11A, D7x11A QS, D7x11 SERIES II, D9x13 SERIES II
Description
Part #
296343209
2" (5.1 cm) ENDLOAD MINI HOUSING X 1.66" (4.2 cm) FST 200
BOX
296343208
FRONT SUB-MINI HEAD ASSEMBLY
296274010
2.25" (5.7 cm) OD ENDLOAD HOUSING X 1.66" (4.2 cm) FST 200
BOX (Standard Sonde)
262488001
FRONT BIT SUB ASSEMBLY (FOR 296274010)
234786001
2.75" (7 cm) OD SIDELOAD HOUSING X 1.625" (4.1 cm) HEX PIN
296281894
141064001
LID BOLT
296255555
O-RING 1.63" (4.1 cm)
262394001
2.75" (7 cm) OD SIDELOAD HOUSING X 2-4 ACME BOX
262391001
230868001
LID BOLT (FOR 262394001)
296351784
2.75" (7 cm) OD SUBSITE SIDELOAD HOUSING X 2-4 ACME BOX
296260055
5544004
SONDE CLOCKING BOLT (FOR 296351784)
296309449
ADAPTER ASS'Y - HAWKEYE 275 (P) X 2-4 ACME PIN
4478003
LID RETAINER BOLT
296279190
NOZZLE
296351780
3" (7.6 cm) OD SIDELOAD UNIVERSAL HOUSING - 2.375" (6 cm)
UNC - 8 BOX X BOX
296268967
DIRT BIT SUB - 2.375" (6 cm) UNC - 8 (P) - UNIVERSAL HOUSING
296268966
SEWER KIT - UNIVERSAL HOUSING
296268969
ADAPTER - 1.625" (4.1 cm) HEX (P) X 2.375" (6 cm) UNC - 8 (P)
296309448
ADAPTER - HAWKEYE 275 (P) X 2.375" (6 cm) API (P)
262392001
ADAPTER - 1.625" (4.1 cm) (P) x 2 - 4 ACME (P)
ROD RECYCLER
Part #
Description
246948001
FST I 1.66" (4.2 cm) #200
TRIHAWK DRILL
Part #
296293686
296293687
289290001
289292001
251839001
280416001
251823001
289254001
296279180
296260971
296279181
296260971
296279182
44
HEADS
Description
TRIHAWK I DRILL HEAD 1.625" (4.1 cm) HEX
TRIHAWK I BIT WITH TEETH
HEX TRIHAWK II
TRIHAWK II BIT ASSEMBLY
TRIHAWK II TEETH
TRIHAWK II BIT ROLL PINS —
.5" (1.3 cm) X 1.25" (3.2 cm)
TRIHAWK II LID ROLL PINS —
.5" (1.3 cm) X 2.5" (6.4 cm)
TRIHAWK II LID SOLID PINS —
.625" (1.6 cm) X 2.375" (6 cm)
TRIHAWK V BIT KIT [for 2.75” (6.9 cm) HOUSING PN 262394001]
BOLTS FOR TRIHAWK V BIT
NOZZLE
SOC HEAD BOLT LOW PROFILE 1/2 - 13 X 1"
O-RING
DIRT HEAD
ADAPTERS
MINI DRILL HEAD
2.25”COMPACT HOUSING
ROD RECYCLER
TRIHAWK II TEETH
TRIHAWK II
TRIHAWK LID SOLID PINS
ROLL PINS
TRIHAWK II BIT ASSEMBLY
COMPACT HDD
D10x14, D10x15
More distance in a small package. An optional rod
loader with the capacity to carry 440' (134.1 m) of drill
stem, combined with 1500 ft-lb (2033.7 Nm) of torque
and 10,000 lb (4535.9 kg) of pullback make the D10x15
great for medium-distance, smaller-diameter bores. It's
self-contained and compact, with a narrow width of
42" (106.7 cm) (with rod loader) for easy access into
tight spots. Without a rod loader, the D10x15ʼs width
is a narrow 36" (91.4 cm) — allowing access into
confined areas.
See the Tool Applications section for usage recommendations.
DRIVE CHUCK
Part #
236301001
296255363
296255351
247261985
DRILL STEM
Part #
219006001
249243001
Description
1.66" (4.2 cm) FST I #200 - One piece
1.66" (4.2 cm) FST I #200 with SUB SAVER
SUB SAVER
TORQ-LOK
DRIVE CHUCK
TORQ-LOK
SUB SAVER
Description
1.66" (4.2 cm) FST I #200 X 10’ (3 m)
UPSET GAUGE — FST I 1.66" (4.2 cm)/FST I 1.88" (4.8 cm)
STARTER ROD HEX
Part #
Description
276261001
1.625" (4.1 cm) HEX X FST #200 BOX
234764001
2" (5 cm) STD. HEX COLLAR
289274001
2" (5 cm) LONG HEX COLLAR with HOLE AND HARDFACE
296343245
HEX COLLAR 1.625" (4.1 cm) WITH HARDFACE AND SHARK TEETH
4478003
CAPSCREW — .375" (1 cm)/16 X .375" (1 cm)
240591001
CAPSCREW — .50" (1.3 cm)/13 X .50" (1.3 cm)
281393001
1 3/8 X 5/8 X 3/8 SEAL WASHER FOR HEX COLLAR STARTER
RODS (Do not use with Trihawk drill heads.)
234945001
2.125" (5.4 cm) HEX X 1.66" (4.2 cm) FST #200 (To use D24x40 tools)
STARTER ROD HAWKEYE
Part #
Description
296309452
STARTER ROD ASS'Y - HAWKEYE 275(B) X 1.66” (4.2 cm) FST I #200 (B)
296309460
296309457
BOLT - SHCS 3/8-16- X .38
296309458
NOZZLE - HAWKEYE 275, .375" (.9 cm) -16 X .25" (.6 cm)
296309459
PLUG - HAWKEYE 275, .375" (.9 cm) - 16 X .25" (.6 cm)
296309462
O-RING 121
UPSET GAUGES
STARTER ROD
HEX COLLARS
HAWKEYE STARTER ROD
Part #
Description
272462001
3.5" (8.9 cm) SPLK II (P) X 1.66" (4.2 cm) FST I #200
(To use D24x40 tools)
SPLINELOK II
45
Bits for
D6x6 - D10x15
BACK OF
TAB
COMPACT HDD
Bits
D6X6 MINI HOUSING BITS 2" (5.1 cm) and 2.25" (5.7 cm) OD HOUSING BITS
Part #
Description
272446001
BIT - HARDFACED 2.25" (5.7 cm) MINI HEAD
296274213
296274214
BIT - HARDFACED 3" (7.6 cm) MINI HEAD
296274215
296294261
BIT - 2.25" (5.7 cm) VCP BIT MINI HEAD
296294262
296294260
BIT - 3" (7.6 cm) VCP BIT MINI HEAD
296294263
296294267
BIT - 2.25" (5.7 cm) CHEVRON MINI HEAD
296294266
296294265
BIT - 3" (7.6 cm) CHEVRON MINI HEAD
296294264
239880001
BIT - SHARK 3" (7.6 cm) D6X6, D7X11A
296330142
2.5" (6.4 cm) VCP BIT MINI HEAD WITH CARBIDE BUTTONS
296330143
2.5" (6.4 cm) VCT BIT MINI HEAD WITH CARBIDE BUTTONS
BOLT-ON, PLATE-STYLE FOR STD./DIRT HEADS
Part #
Description
246525001
STD. RAMPED 3.5" X 10.25" – .75"
(8.9 cm X 26 cm – 1.9 cm) CAST STEEL
246526001
STD. RAMPED 4" X 10.25" – .75"
(10 cm X 26 cm – 1.9 cm) CAST STEEL
246570001
QUICK SHOT STD. RAMPED 3.5" X 10.25" – .75"
246571001
QUICK SHOT STD. RAMPED 4" X 10.25" – .75"
246734001
STD. RAMPED HARDFACED 3" X 10.25" – .75"
246735001
STD. RAMPED HARDFACED 3.5" X 10.25" – .75"
246736001
STD. RAMPED HARDFACED 4" X 10.25" – .75"
246798001
QUICK SHOT STD. RAMPED HARDFACED 3" X 10.25" - .75”
(8 cm X 26 cm - 1.9 cm) CAST STEEL
246799001
QUICK SHOT STD. RAMPED HARDFACED 3.5" X 10.25" – .75"
235175001
SHARK 3.5" X 10.13" – .75"
(8.9 cm X 25.7 cm – 1.9 cm) CAST STEEL
235178001
SHARK 4" X 10.18" – .75"
(10 cm X 25.9 cm – 1.9 cm) CAST STEEL
235181001
SHARK 4.5" X 10.18" – .75"
(11.4 cm x 25.9 cm – 1.9 cm) CAST STEEL
289371001
VCT 3.5" X 10.375" – .75"
(8.9 cm X 26.4 cm – 1.9 cm) PLATE STEEL
296255745
VCT with hole 3.5" X 10.375" – .75"
289377001
VCP 3.5" X 10.375" – .75"
MINI HARDFACED
SHARK MINI
STANDARD
QUICK-SHOT
STD. HARDFACED
SHARK
VCT WITH HOLE
49
COMPACT HDD
Bits
BOLT-ON, PLATE-STYLE FOR STD./DIRT HEADS (continued)
Description
Part #
296255733
VCP with hole 3.5" X 10.375" – .75"
296255712
VCTT 3.5" X 10.25" – .75"
(8.9 cm X 26 cm – 1.9 cm) PLATE STEEL
296314227
ROTARY DIRT BIT - 4" X 10.18" (10.2 cm X 25.9 cm)
296314229
ROTARY DIRT QUICK SHOT - 4" X 10.18" (10.2 cm X 25.9 cm)
296334309
GLADIATORTM SPEARTM 3.5" (8.9 cm) X 12.5" (31.8 cm) WITH HOLE
296334328
GLADIATORTM SPEARTM 4" (10.2 cm) X 12.5" (31.8 cm) WITH HOLE
296334306
GLADIATORTM SPEARTM 4.5" (11.4 cm) X 12.5" (31.8 cm) WITH HOLE
296334359
GLADIATORTM SPEARTM 5" (12.7 cm) X 12.5" (31.8 cm) WITH HOLE
296334312
GLADIATORTM MALLETTM 3.5" (8.9 cm) X 12" (30.5 cm) WITH HOLE
296334324
GLADIATORTM MALLETTM 4" (10.2 cm) X 12" (30.5 cm) WITH HOLE
296334303
GLADIATORTM MALLETTM 4.5" (11.4 cm) X 12" (30.5 cm) WITH HOLE
296334356
GLADIATORTM MALLETTM 5" (12.7 cm) X 12" (30.5 cm) WITH HOLE
296334350
GLADIATORTM CLUBTM 3.5" (8.9 cm) X 12" (30.5 cm) WITH HOLE
296334326
GLADIATORTM CLUBTM 4" (10.2 cm) X 12" (30.5 cm) WITH HOLE
296334300
GLADIATORTM CLUBTM 4.5" (11.4 cm) X 12" (30.5 cm) WITH HOLE
296334353
GLADIATORTM CLUBTM 5" (12.7 cm) X 12" (30.5 cm) WITH HOLE
BIT BOLTS
Part #
129667010
GLADIATORTM SPEARTM
GLADIATORTM MALLETTM
GLADIATORTM CLUBTM
Description
.50" (1.3 cm) – 13 (33 cm) x 1" (2.5 cm) socket head
BIT BOLTS
50
REAMERS FOR
D6X6-D10X15
TAB
BACK OF
TAB
COMPACT HDD
API REAMERS, VERMEER D24X26 DRILLS & SMALLER (or 24,000 lb pull & 2700 ft-lb torque or less)
NOTE: the API connection rating to the machines is for reamers only. In many cases, you will use a smaller API connection with drill heads.
MIX MASTER REAMER WITH 2.375” (6 cm) API SPUD
Part #
Description
296320135
6" (15.2 cm) API REG - THRU SPUD
296320136
296320137
296320138
296320139
296320140
FLUTED REAMER — WITH 2.375" (6 cm) API (REG) WITH 24K SWIVEL
Part #
Description
296258154
6" (15.2 cm) REG SHARK
296258156
296260059
296260061
296260063
296260065
296258153
6" (15.2 cm) REG ROTARY
296258155
296260058
296260060
296260062
296260064
WING MIXER WITH BELL — WITH 2.375" (6 cm) API (REG)
Part #
Description
296258008
8" (20.3 cm)
296258010
10" (25.4 cm)
296258012
12" (30.5 cm)
296258014
14" (35.6 cm)
296258016
16" (40.6 cm)
DUCK BILL REAMERS
Part #
Description
296352023
6" (15.2 cm) PULL BACK DUCK BILL REAMER ASS’Y
296343122
Note: All API reamers without swivels come box up (toward machine), pin down
(away from machine).
MIX MASTER
API FLUTED SHARK
API FLUTED ROTARY
WING MIXER WITH BELL
DUCK BILL REAMER
53
COMPACT HDD
API REAMERS, VERMEER D24X26 DRILLS & SMALLER (or 24,000 lb pull & 2,700 ft-lb torque or less)
WING CUTTER WITH 2.375” (6 cm) API (REG)
Description
Part #
296259129
8" (20.3 cm)
296259131
10" (25.4 cm)
WING CUTTER
HELICAL PLUS WITH 2.375” (6 cm) API (REG)
Part #
Description
296268800
8" (20.3 cm)
296268801
10" (25.4 cm)
296268802
12" (30.5 cm)
BELL WITH TEETH WITH 2.375” (6 cm) API (REG)
Part #
Description
296259154
6" (15.2 cm)
296259155
8" (20.3 cm)
296259156
10" (25.4 cm)
296259157
12" (30.5 cm)
HELICAL PLUS
BELL WITH TEETH
SPIRAL SHARK WITH 2.375” (6 cm) API (REG) WITH 24K SWIVEL
Part #
Description
296259065
6" (15.2 cm)
296259067
8" (20.3 cm)
296259069
10" (25.4 cm)
296259071
12" (30.5 cm)
54
SPIRAL SHARK
COMPACT HDD
VERMEER CONNECTION REAMERS
BAR-CUTTER — 1.625" (4.1 cm) HEX
Part #
Description
235032001
8" (20.3 cm)
235033001
10" (25.4 cm)
WING-CUTTER — 1.625" (4.1 cm) HEX
Part #
Description
235009001
4.5" (11.4 cm)
235029001
5" (12.7 cm)
235010001
6" (15.2 cm)
235011001
8" (20.3 cm)
235012001
10" (25.4 cm)
HELICAL — 1.625" (4.1 cm) HEX
Part #
Description
235018001
6" (15.2 cm)
235019001
8" (20.3 cm)
235020001
10" (25.4 cm)
235021001
12" (30.5 cm)
SUPER HELICAL
Part #
284803001
284804001
284805001
BAR-CUTTER
WING-CUTTER
HELICAL
— 1.625" (4.1 cm) HEX
Description
8" (20.3 cm)
10" (25.4 cm)
12" (30.5 cm)
HELICAL PLUS — 1.625" (4.1 cm) HEX
Part #
Description
279555001
8" (20.3 cm)
279556001
10" (25.4 cm)
279557001
12" (30.5 cm)
SUPER HELICAL
HELICAL PLUS
BELL WITH TEETH — 1.625" (4.1 cm) HEX - USE 281383001 SHACKLE
Part #
Description
235022001
6.625" (16.8 cm)
235023001
8.625" (21.9 cm)
235024001
10.75" (27.3 cm)
235025001
12.75" (32.4 cm)
BELL WITH TEETH
55
COMPACT HDD
SMOOTH BELL (NO TEETH) — 1.625" (4.1 cm) HEX - USE 281383001 SHACKLE
Description
Part #
235001001
6.5" (16.5 cm)
235002001
8.5" (21.6 cm)
SPIRAL/SHARK
Part #
235005001
235006001
235007001
235008001
FLUTED/SHARK
Part #
235058001
235059001
235060001
235061001
235062001
— 1.625" (4.1 cm) HEX - USE 281383001 SHACKLE
Description
4.5" (11.4 cm) NO TEETH
5.5" (14 cm)
6.625" (16.8 cm)
8.625" (21.9 cm)
— 1.625" (4.1 cm) HEX - USE 281383001 SHACKLE
Description
4.5" (11.4 cm)
6" (15.2 cm)
8" (20.3 cm)
10" (25.4 cm)
12" (30.5 cm)
SMOOTH BELL
SPIRAL
NO TEETH
SPIRAL/SHARK
FLUTED/SHARK
FLUTED/ROTARY — 1.625" (4.1 cm) HEX - USE 281383001 SHACKLE
Part #
Description
235013001
4.5" (11.4 cm)
235014001
6" (15.2 cm)
235015001
8" (20.3 cm)
235016001
10" (25.4 cm)
235017001
12" (30.5 cm)
4.5" FLUTED/ROTARY
FLUTED/SHARK (WITHOUT SWIVEL) — 1.625" (4.1 cm) HEX - USE 281383001 SHACKLE
Part #
Description
281418001
6" (15.2 cm)
281419001
8" (20.3 cm)
281420001
10” (25.4 cm)
281421001
12” (30.5 cm)
FLUTED/SHARK
WITHOUT SWIVEL
56
SWIVELS FOR
D6x6 - D10x15
BACK OF TAB
COMPACT HDD
ACCESSORIES
PL8000, D6X6, D7x11, D7X11 SERIES II, D7x11A, D7x11A QS, D9X13 SERIES II, D10X14, D10x15
SWIVELS
Part #
235086001
235038001
296258121
284960001
296258139
296258140
Description
SINGLE EYE 1.625" (4.3 cm) Hex (P) 7000 lb (3175 kg)
SINGLE EYE 1.625" (4.3 cm) Hex (P) 24,000 lb (10,886 kg)
DOUBLE EYE 10,000 lb (4536 kg)
SUB ASS’Y - 24,000 lb (10.886 kg) (For swivel #235038001)
SINGLE EYE 2.375” (6 cm) API REG (P) 10,000 lb (4536 kg)
CLEVIS - 2.375” (6 cm) API REG - 10,000 lb (4536 kg)
PULLING EYES
Part #
289443001
289442001
Description
10,000 lb (4536 kg) X 2.375" (6 cm) API (B)
10,000 lb (4536 kg) X 2.375" (6 cm) API (P)
7000 LB
SINGLE EYE
DOUBLE EYE
59
MEDIUM HDD
TOOLING
TAB
BACK OF
TAB
MEDIUM
HDD TOOLING
D16x20 Series II, D16x20A, D18x22, D20x22 Series II . . . . . . . . . . . . 64
D20x22FX Series II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
D24x26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
D24x33 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
D24x40, D24x40A, D24X40 Series II . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
D33x44 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
D36x50, D36x50 Series II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Medium HDD Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Medium HDD Reamers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Medium HDD Vermeer Connection Reamers . . . . . . . . . . . . . . . . . . .101
D33x40, D36x50, D36x50 Series II Reamers . . . . . . . . . . . . . . . . . . . .103
Medium HDD Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
63
MEDIUM HDD
D16x20 SERIES II, D16x20A, D18x22, D20X22 SERIES II
Big Power in a Small Footprint. The D16x20 Series II,
powered by a 63 hp (47 kW) Kubota diesel engine with
16,000 lb (7257.5 kg) of thrust/pullback force and 2000
ft-lb (2711.6 Nm) of torque, brings performance to a wide
range of bores. The unit's compact footprint allows for
entry into confined jobsites and side-by-side trailering
with many modular mix systems.
DRIVE CHUCK
Part #
235751001
296255364
296255352
247261985
296279709
296279708
296291966
296281195
DRILL STEM
Part #
230993001
249244001
221628001
249245001
Description
1.9" (4.8 cm) FST I #250 - ONE PIECE
1.9" (4.8 cm) FST I #250 WITH SUB SAVER
1.9" (4.8 cm) #250 SUB SAVER
TORQ-LOK
2.06" (5.2 cm) FST I #400 DRIVE CHUCK WITH SUB SAVER
2.06" (5.2 cm) FST I #400 SUB SAVER
D16X20 SERIES II - SUB SAVER 1.9" (4.8 cm)
D20X22 SERIES II - SUB SAVER 2.06" (5.2 cm)
Description
1.9" (4.8 cm) FST I #250 X 10’ (3 m)
UPSET GAUGE FST I 1.9" (4.8 cm)
2.06" (5.2 cm) FST I #400 X 10’ (3 m)
UPSET GAUGE FST I 2.06" (5.2 cm)
STARTER ROD HEX
Part #
Description
240895001
1.9" (4.8 cm) FST I #250 X 1.625" (4.1 cm) HEX
234840001
1.9" (4.8 cm) FST I #250 X 2.125" (5.4 cm) HEX
234827001
STD. HEX COLLAR
289273001
LONG HEX COLLAR WITH HOLE AND HARDFACE
296343244
HEX COLLAR - 2.125" (5.4 cm) WITH HARDFACE AND SHARK
TEETH
4478003
CAPSCREW — .375" (1 cm)/16 X .375" (1 cm)
240591001
CAPSCREW — .50" (1.3 cm)/13 X .50" (1.3 cm)
281393001
1.375" X .625" X .375" (3.5 cm x 1.6 cm x .9 cm) SEAL WASHER
FOR HEX COLLAR STARTER RODS (Do not use with TriHawk
drill heads.)
280462001
O-RING — 3.5" (8.9 cm) SPLK
250658001
2.06" (5.2 cm) FST I #400 X #400 2.125" (5.4 cm) HEX
STARTER ROD HAWKEYE
Part #
Description
296312544
STARTER ROD ASS'Y - HAWKEYE 350 (B) X 1.90 FST I #250 (B)
296309372
STARTER ROD - HAWKEYE 350 (B) X 2.06” (5.2 cm) FST I #400 (B)
296309390
TORQUE COLLAR 350
296309391
TORQUE COLLAR WITH CARBIDE
Part #
Description
272462001
(To use D24x40 tools)
296260217
SPLK II 3.5" (8.9 cm) FST I #250 X 1.9" (4.8 cm) FST I
64
DRIVE CHUCK
TORQ-LOK
SUB SAVER
UPSET GAUGES
STARTER ROD
HEX COLLARS
HAWKEYE STARTER ROD
SPLINELOK II
MEDIUM HDD
Part #
Description
226638001
3" (7.6 cm) OD SIDELOAD HOUSING X 2.125" (5.4 cm) HEX PIN
296351789
3" (7.6 cm) OD SIDELOAD HOUSING X 2.375" (6 cm) API REG BOX
296281894
SONDE LID (FOR 226638001, 296351789, 296255579)
296251785
3" (7.6 cm) OD SUBSITE SIDELOAD HOUSING X 2.375" (6 cm) API
REG BOX
246811001
284944001
SUBSITE CLOCKING BOLT
141064001
SONDE LID BOLT (FOR 226638001, 296351789, 296251785)
4478003
LID RETAINER BOLT (FOR 22638001, 296351789, 296251785)
296255554
O-RING 2.125" (5.4 cm)
296279190
NOZZLE (FOR 226638001, 296351789, 296251785)
296351780
3" (7.6 cm) OD SIDELOAD UNIVERSAL HOUSING X 2.375"
(6 cm) 8-UNC (B) X (B)
296351755
SONDE LID - UNIVERSAL HOUSING
251823001
LID RETAINER PIN - UNIVERSAL HOUSING
296268967
DIRT BIT SUB - 2.375" (6 cm) 8 - UNC (P) - UNIVERSAL HOUSING
296268966
296268969
REAR SUB 1.625" (4.1 cm) ITS / HEX (P) X 2.375" (6 cm) 8 UNC (P)
296268968
REAR SUB - 2.125" (5.4 cm) ITS / HEX (P) X 2.375" (6 cm) 8 UNC (P)
296309448
REAR SUB HAWKEYE 275 (P) X 2.375" (6 cm) API (P)
296294367
REAR 2.125" (5.4 cm) 8 (P) x 2.375" (6 cm) API (USE WITH
296351789)
296309383
289417001
REAR SUB SPLK II 3.5" (8.9 cm) (B) X 2.375" (6 cm) API REG (P)
289403001
REAR SUB HEX 2.125" (5.4 cm) HEX (P) X 2.375" (6 cm) API
REG (P) (USE WITH 296255579)
ROD RECYCLER
Part #
Description
246951001
FST I 1.9" (4.8 cm) X #250
246947001
FST I 2.06" (5.2 cm) X #400
TRIHAWK DRILL
Part #
289250001
289305001
284965001
296260157
296260158
296260152
289311001
289318001
284969001
HEAD ASSEMBLY
Description
HEX TRIHAWK I
HEX TRIHAWK II
HEX TRIHAWK III
TRIHAWK I SUB SITE HOUSING 2.12" (5.4 cm) HEX (P)
TRIHAWK II SUB SITE HOUSING 2.12" (5.4 cm) HEX (P)
TRIHAWK III SUB SITE HOUSING 2.12" (5.4 cm) HEX (P)
SPLK II 3.5" (8.9 cm) TRIHAWK I
SPLK II 3.5" (8.9 cm) TRIHAWK II
SPLK II 3.5" (8.9 cm) TRIHAWK III
DIRT HEAD
ADAPTERS
UNIVERSAL HOUSING
ROD RECYCLER
TRIHAWK ASSEMBLY
TRIHAWK I
65
MEDIUM HDD
TRIHAWK REPLACEMENT HOUSING
Part #
Description
296279066
TRIHAWK SONDE HOUSING 2.375" (6 cm) API
(INCLUDES DOOR AND PUNCH KIT)
284966001
TRIHAWK SONDE HOUSING 2.12" (5.4 cm) HEX (P)
296260176
TRIHAWK SUB SITE HOUSING 2.375" (6 cm) API / REG (B)
TRIHAWK BITS
Part #
284950001
289306001
284967001
296260206
296260210
TRIHAWK TEETH
Part #
251824001
251825001
251839001
289308001
251872001
280416001
284968001
296260195
296257835
296279190
251823001
289254001
284921001
284757001
296257842
296255530
Description
TRIHAWK I BIT ASSEMBLY
TRIHAWK II BIT ASSEMBLY WITH BIT-MOUNT SUB
TRIHAWK III BIT ASSEMBLY
TRIHAWK IV BIT
TRIHAWK V BIT
& ACCESSORIES
Description
TRIHAWK I SHORT TOOTH
TRIHAWK I MEDIUM TOOTH
TRIHAWK I LONG TOOTH
TRIHAWK II BIT
TRIHAWK II TOOTH
.5" X 1.25" (1.3 cm X 3.2 cm)
TRIHAWK III TOOTH
TRIHAWK III PULLBACK PIN KIT
TRIHAWK DIRT BIT ADAPTER
NOZZLE
TRIHAWK & SPLK DIRT HEAD LID ROLL
PINS — .5" X 2.5" (1.3 cm X 6.4 cm)
TRIHAWK & SPLK DIRT HEAD LID SOLID
PINS — .625" X 2.38" (1.6 cm X 6 cm)
SPLK PUNCH KIT & HOLDER
TRANSMITTER ISOLATORS
SPLK II 3.5" (8.9 cm) JOINT ROLL PINS —
.5" X 2.5" (1.3 cm X 6.4 cm) SET OF 8 PCS
SPLK II 3.5" (8.9 cm) JOINT SOLID PINS —
.688" X 3.25" (1.7 cm X 8.3 cm)
TRIHAWK II
TRIHAWK III
TRIHAWK IV
TRIHAWK V
DIRT BIT ADAPTER
TRIHAWK II TEETH
TRIHAWK LID
SOLID PINS
TRIHAWK III
PULLBACK PIN
SPLINELOK
ROLL PINS
SPLINELOK
SOLID PINS
PUNCH KIT
TRANSMITTER
ISOLATORS
66
MEDIUM HDD
LOOK AT PRODUCTIVITY FROM A DIFFERENT
ANGLE. With the D20x22FX Series II Navigator® flexangle drill, Vermeer is not only helping revolutionize the
way hard-working drilling professionals get the job done,
we’re changing the way you’ll look at your drill. It’s the
industry’s first flex-angle drill capable of entry points
anywhere between 18 and 90 degrees - yet another
example of the Vermeer dedication to innovation and
commitment to the industry.
DRILL STEM
Part #
296337801
SUB SAVER
Part #
296339860
Description
FST I 2.06" #400 X 10' (5.2 cm X 3 m)
Description
SUB SAVER 2.38" to 2.06" X .95" (6 cm to 5.2 cm X 2.4 cm) ID
LEAD RODS/LEAD RODS WITH STABILIZERS
Part #
Description
296343124
LEAD ROD ASS’Y 2.375" (6 cm) API (B) X 2.06" (5.2 cm) #400
(B) WITH CHECK VALVE
296343125
LEAD ROD ASS’Y 2.875" (7.3 cm) API (B) X 2.06" (5.2 cm) #400
(B) WITH CHECK VALVE
296343126
LEAD ROD ASS’Y 2.375" (6 cm) API (B) X 2.06" (5.2 cm) #400
(B) WITHOUT CHECK VALVE
296343127
LEAD ROD ASS’Y 2.875" (7.3 cm) API (B) X 2.06" (5.2 cm) #400
(B) WITHOUT CHECK VALVE
296352055
LEAD ROD 4" (10.2 cm) STABILIZER 2.06" (5.2 cm) (B) X 2.375"
(6 cm) (B) WITH CHECK VALVE
296352056
LEAD ROD 4.5" (11.4 cm) STABILIZER 2.06" (5.2 cm) (B) X
2.375" (6 cm) (B) WITH CHECK VALVE
296352057
(7.3 cm) (B) WITH CHECK VALVE
296352058
(7.3 cm) (B) WITH CHECK VALVE
296352100
(6 cm) (B) WITHOUT CHECK VALVE
296352101
LEAD ROD 4.5" (11.4 cm) STABILIZER 2.06" (5.2 cm) (B) X
2.375" (6 cm) (B) WITHOUT CHECK VALVE
296352102
(7.3 cm) (B) WITHOUT CHECK VALVE
296352103
(7.3 cm) (B) WITHOUT CHECK VALVE
UNITIZED STEP
Part #
296349751
296349752
296349753
296349754
296349755
296349756
D20X22FX SERIES II
BITS
Description
4" (10.2 cm) STEP BIT 2.375" (6 cm) API REG (P) UNITIZED
4.125" (10.5 cm) STEP BIT 2.375" (6 cm) API REG (P) UNITIZED
5" (12.7 cm) STEP BIT 2.375" (6 cm) API REG (P) UNITIZED
LEAD RODS
UNITIZED STEP BITS
67
MEDIUM HDD
D20X22FX SERIES II
UNITIZED STEP
Part #
296349757
296349758
IZED
296349759
BITS (continued)
Description
5.125" (13 cm) STEP BIT 2.375" (6 cm) API REG (P) UNITIZED
5.25" (13.3 cm) STEP BIT 2.375" cm (6 cm) API REG (P) UNIT5.5" (14 cm) STEP BIT 2.375" (6 cm) API REG (P) UNITIZED
UNITIZED CHEVRON BITS
Part #
Description
296349760
4" (10.2 cm) CHEVERON BIT 2.375" (6 cm) API REG (P) UNITIZED
296349761
4.125" (10.5 cm) CHEVERON BIT 2.375" (6 cm) API REG (P)
UNITIZED
296349762
UNITIZED
296349763
UNITIZED
296349764
UNITIZED
296349765
5" (12.7 cm) CHEVERON BIT 2.375" (6 cm) API REG (P) UNITIZED
296349766
5.125" (13 cm) CHEVERON BIT 2.375" (6 cm) API REG (P)
UNITIZED
296349767
UNITIZED
296349768
5.5" (14 cm) CHEVERON BIT 2.375" (6 cm) API REG (P) UNITIZED
POLYCRYSTALLINE DIAMOND COMPACT (PDC) DRILL BITS
Part #
Description
296352034
4" (10.2 cm) PDC BIT - 2.375" (6 cm) API (P)
296352035
4.125" (10.5 cm) PDC BIT - 2.375" (6 cm) API (P)
296352036
4.25" (10.8 cm) PDC BIT - 2.375" (6 cm) API (P)
296352037
4.5" (11.4 cm) PDC BIT - 2.375" (6 cm) API (P)
296352038
4.75" (12.1 cm) PDC BIT - 2.875" (7.3 cm) API (P)
296352039
4.875" (12.4 cm) PDC BIT - 2.875" (7.3 cm) API (P)
296352040
5.125" (13 cm) PDC BIT - 2.875" (7.3 cm) API (P)
296352041
5.625" (14.3 cm) PDC BIT - 2.875" (7.3 cm) API (P)
68
UNITIZED STEP BITS
POLYCRYSTALLINE DIAMOND COMPACT
MEDIUM HDD
REPLACEMENT
Part #
296349770
296349771
296349772
296349773
296349774
296349775
296349776
296349777
296349778
296349779
296349780
296349781
296349782
296349783
296349784
296349785
296349786
296349787
296349788
DRILL BITS (SET OF 3) AND ACCESSORIES
Description
4.125" (10.5 cm) STEP STYLE BLADES - (REPLACEMENT SET 3)
5.5" (14 cm) STEP STYLE BLADES - (REPLACEMENT SET 3)
4" (10.2 cm) FINGER STYLE BLADES - (REPLACEMENT SET 3)
4.25" (10.8 cm) FINGER STYLE BLADES - (REPLACEMENT SET 3)
5.5" (14 cm) FINGER STYLE BLADES - (REPLACEMENT SET 3)
3.875" (9.8 cm) REAMING STABILIZER
5.5" (14 cm) REAMING STABILIZER
THREADED SHANK 3 BLADE
LOCKING BOWL 3-9/32 O.D. 3 BLADE
ADAPTER SHANK - 2.375" (6 cm) API REG (P)
D20X22FX SERIES II
REPLACEABLE BLADE
DRILL BIT ASSEMBLY
UNITIZED STEP BITS
GEO-SWIVEL ASSEMBLY
Part #
Description
296343117
24,000 lb (10,886.2 kg) SWIVEL ASSEMBLY 2.06" (5.2 cm) #400 (P)
296343118
24,000 lb (10,886.2 kg) SWIVEL ASSEMBLY 2.06" (5.2 cm) #400 (B)
PUSH TOOL ASSEMBLY
Part #
Description
296342820
PUSH TOOL ASSEMBLY - GEO TOOL
SPUD - 2.06" (5.2 cm) FS #400 (B) X SWIVEL END
GEO-MIXER REAMER ASSEMBLY
Part #
Description
296343237
MIXER REAMER ASS’Y - HORIZONTAL GEO DRILL (LOOP)
GEO-MIXER
69
70
MEDIUM HDD
D24x26
Complete longer bores productively. The D24x26 with
rod loader is a rugged, midsize horizontal directional
drilling machine that combines the power and features
needed to complete longer bores efficiently. The D24x26
boasts a large stem carrying capacity of 600' (182.3 m),
2600 ft-lb (3525.1 Nm) of torque and a variable-flow
onboard water pump.
DRIVE CHUCK
Part #
240932001
249137001
247261985
Description
FST I 2.06" (5.2 cm) #400 WITH SUB SAVER
FST I 2.06" (5.2 cm) #400 SUB SAVER
TORQ-LOK
DRILL STEM
Part #
221628001
249245001
Description
FST I 2.06" #400 X 10' (5.2 cm X 3 m)
UPSET GAUGE 2.06” (5.2 cm)
STARTER ROD HEX
Part #
Description
250658001
HEX 2.06" (5.2 cm) FST I #400 X 2.125” (5.4 cm) HEX
234827001
STD. HEX COLLAR
289273001
296343244
TEETH
4478003
CAPSCREW — .375" (1 cm)/16 X .375" (1 cm)
280462001
240591001
CAPSCREW — .50" (1.3 cm)/13 (33 cm) X .50" (1.3 cm)
281393001
1.75" (4.5 cm) X .625" (1.6 cm) X .375" (1 cm) 8 SEAL WASHER
FOR HEX COLLAR STARTER RODS (Do not use with TRI
HAWK drill heads.)
STARTER ROD HAWKEYE
Part #
Description
296309372
STARTER ROD ASS'Y - HAWKEYE 350 (B) X 2.06" (5.2 cm) FST I #400 (B)
296309390
296309373
BOLT - SHCS 3/8-16- X .38
296309374
296309375
PLUG - HAWKEYE 275, .375" (.9 cm) -16 X .25" (.6 cm)
296309376
O-RING 121
296309391
TORQUE COLLAR WITH CARBIDE
DRIVE CHUCK
TORQ-LOK
SUB SAVER
UPSET GAUGES
STARTER ROD
HEX COLLARS
HAWKEYE STARTER ROD
Part #
Description
272462001
3.5" (8.9 cm) SPLK II X (P) X 1.66" (4.2 cm) FST I #200
(to use D24x40 tools)
296260227
3.5" (8.9 cm) SPLK II X 2.06" (5.2 cm) FST I #400
SPLINELOK II
71
MEDIUM HDD
D24x26
DRILL HEADS & ACCESSORIES
Part #
Description
226638001
296351789
SONDE LID (FOR 226638001, 296351789, 296255579)
296281894
296251785
REG BOX
246811001
284944001
141064001
4478003
296255554
O-RING 2.125" (5.4 cm)
296279190
NOZZLE (FOR 226638001, 296351789, 296251785)
296351780
(6 cm) 8-UNC (B) X (B)
296351755
251823001
296268967
296268966
296268969
296268968
296309448
296294367
296351789)
296309383
289417001
289403001
REG (P) (USE WITH 296255579)
ROD RECYCLER
Part #
Description
246947001
FST I #400 2.06" (5.2 cm) X #400
TRIHAWK DRILL
Part #
289250001
289305001
284965001
296260157
296260158
296260152
289311001
289318001
284969001
HEAD ASSEMBLY
Description
HEX TRIHAWK I
HEX TRIHAWK II
HEX TRIHAWK III
TRIHAWK II SUB SITE HOUSING 2.12" (5.4 cm) HEX (P)
Part #
Description
296279066
TRIHAWK SONDE HOUSING 2.375" (6 cm) API/ REG (B)
284966001
TRIHAWK SONDE HOUSING 2.125" (5.4 cm) HEX (P)
296260176
TRIHAWK SUBSITE HOUSING 2.375" (6 cm) API / REG (B)
72
DIRT HEAD
ADAPTERS
UNIVERSAL HOUSING
ROD RECYCLER
TRIHAWK ASSEMBLY
TRIHAWK I
TRIHAWK II
TRIHAWK III
MEDIUM HDD
D24x26
TRIHAWK BITS
Part #
284950001
289306001
284967001
296260206
296260210
TRIHAWK TEETH
Part #
251824001
251825001
251839001
289308001
251872001
280416001
284968001
296260195
296257835
296279190
251823001
289254001
284921001
284757001
296257842
296255530
Description
TRIHAWK IV BIT
TRIHAWK V BIT
& ACCESSORIES
Description
TRIHAWK I SHORT TOOTH
TRIHAWK II BIT
TRIHAWK II TOOTH
.5" X 1.25" (1.3 cm X 3.2 cm)
TRIHAWK III TOOTH
NOZZLE
PINS — .5" X 2.5" (1.3 cm X 6.4 cm)
PINS — .625" X 2.38" (1.6 cm X 6 cm)
.5" X 2.5" (1.3 cm X 6.4 cm) SET OF 8 PCS
.688" X 3.25" (1.7 cm X 8.3 cm)
TRIHAWK IV
TRIHAWK V
DIRT BIT ADAPTER
TRIHAWK II TEETH
TRIHAWK LID
SOLID PINS
TRIHAWK III
PULLBACK PIN
SPLINELOK
ROLL PINS
SPLINELOK
SOLID PINS
PUNCH KIT
TRANSMITTER
ISOLATORS
73
MEDIUM HDD
D24x33
The versatility needed to complete a wide range of
jobs. With a rack-and-pinion drive system and a compact
58.5" (148.6 cm) width, the D24x33 is specially designed
for working on small- to medium-diameter HDD projects.
With its small footprint, the D24x33 is excellent for use in
urban areas. It excels on projects that include easement
work, road crossings and creek crossings.
DRIVE CHUCK
Part #
284182001
276497001
247261985
DRILL STEM
Part #
281600001
290537001
STARTER ROD
Part #
284181001
234827001
289273001
296343244
4478003
240591001
281393001
289398001
280462001
Description
FST II 2.06" (5.2 cm) WITH SUB SAVER
FST II 2.06" (5.2 cm) SUB SAVER
TORQ-LOK
TORQ-LOK
Description
FST II 2.06" (5.2 cm) X 10’ (3 m)
UPSET GAUGE, FST II 2.06" (5.2 cm)
Description
HEX 2.06" (5.2 cm) FST II
STD. HEX COLLAR
TEETH
CAPSCREW — .375" (1 cm)/16 X .375" (1 cm)
CAPSCREW — .50" (1.3 cm)/13 X .50" (1.3 cm)
1 .375" (.9 cm) X .625" (1.6 cm) X .375" (.9 cm)
SEAL WASHER FOR HEX COLLAR STARTER
RODS (Do not use with TRI HAWK drill heads.)
SPLK II 3.5" (8.9 cm) X 2.06" (5.2 cm) FST II
Part #
Description
226638001
296351789
296281894
SONDE LID (FOR 226638001, 296351789, 296255579)
296251785
REG BOX
246811001
284944001
141064001
4478003
296255554
O-RING 2.125" (5.4 cm)
74
DRIVE CHUCK
SUB SAVER
UPSET GAUGES
STARTER ROD
HEX COLLARS
SPLINELOK II
MEDIUM HDD
D24x33
STANDARD DRILL HEADS AND ACCESSORIES (continued)
Description
Part #
296279190
NOZZLE (FOR 226638001, 296351789, 296251785)
296351780
(6 cm) 8-UNC (B) X (B)
296351755
251823001
296268967
296268966
296268969
296268968
296309448
296294367
296351789)
296309383
289417001
289403001
REG (P) (USE WITH 296255579)
DIRT HEAD
ADAPTERS
UNIVERSAL HOUSING
ROD RECYCLER
Part #
Description
284095001
FST II 2.06" (5.2 cm)
ROD RECYCLER
75
MEDIUM HDD
D24x33
TRIHAWK DRILL
Part #
284249001
296255360
289327001
284970001
296257837
296257839
296260153
296260154
289311001
289318001
284969001
HEADS
Description
HEX TRIHAWK I END LOAD
HEX TRIHAWK I
HEX TRIHAWK II
HEX TRIHAWK III
TRIHAWK I SUB SITE HOUSING 350 SPLK II (B)
TRIHAWK III SUB SITE HOUSING 350 SPLK II (B)
Part #
Description
286664001
TRIHAWK END LOAD HEAD BIT SUB
296260177
TRIHAWK SUB SITE HOUSING 2.375" (6 cm) API/REG (B)
296257840
TRIHAWK SONDE HOUSING 2.375" (6 cm) API/REG (B)
(INCLUDES DOOR & PUNCH KIT)
TRIHAWK BIT ASSEMBLY
Part #
Description
284951001
284178001
284973001
296257841
TRIHAWK IV BIT ASSEMBLY
296260211
TRIHAWK V BIT ASSEMBLY
TRIHAWK TEETH
Part #
251871001
251872001
286550001
284177001
251887001
280416001
284975001
296260180
251817001
280407001
296257832
296257831
251823001
289403001
289417001
76
& ACCESSORIES
Description
TRIHAWK I EXTRA-LONG/SMALL NOSE TOOTH
TRIHAWK II BIT
TRIHAWK II TOOTH
.5" X 1.25" (1.3 cm X 3.2 cm)
TRIHAWK III TOOTH
TRIHAWK V BIT-MOUNT ROLL PINS —
.5" X 2.125" (1.3 cm X 5.4 cm)
TRIHAWK 2.375" (6 cm) API REG BOX FRONT
BIT SUB
TRIHAWK 2.875" (7.3 cm) API REG BOX FRONT
BIT SUB
TRIHAWK BIT-MOUNT ROLL PINS (EXCEPT
TRIHAWK V) — .5" X 2.5" (1.3 cm X 6.4 cm)
HEX 2.125" (5.4 cm) HEX PINS 2.375" (6 cm)
API REG PIN-CONNECTION SUB
SPLK II 3.5" (8.9 cm) BOX X 2.375" (6 cm)
TRIHAWK ASSEMBLY
TRIHAWK I
TRIHAWK II
TRIHAWK III
TRIHAWK IV
TRIHAWK V
DIRT BIT ADAPTER
TRIHAWK II TEETH
TRIHAWK LID
SOLID PINS
TRIHAWK III
PULLBACK PIN
SPLINELOK
ROLL PINS
SPLINELOK
SOLID PINS
PUNCH KIT
TRANSMITTER
ISOLATORS
MEDIUM HDD
D24x33
TRIHAWK TEETH & ACCESSORIES (continued)
Description
Part #
251823001
PINS — .5" X 2.5" (1.3 cm X 6.4 cm)
289254001
PINS — .625" X 2.38" (1.6 cm X 6 cm)
296257842
.5" x 2.5" (1.3 cm X 6.4 cm) SET OF 8 PCS
296255530
.688" X 3.25" (1.7 cm X 8.3 cm) SET OF 8 PCS
284921001
284757001
DIRT BIT ADAPTER
TRIHAWK II TEETH
TRIHAWK LID
SOLID PINS
TRIHAWK III
PULLBACK PIN
SPLINELOK
ROLL PINS
SPLINELOK
SOLID PINS
PUNCH KIT
TRANSMITTER
ISOLATORS
77
MEDIUM HDD
D24x40, D24x40A, D24X40 SERIES II
More torque, fewer stuck bores. The D24x40 Series II with
rod loader is designed to fit a long list of productivityenhancing features into a compact, maneuverable machine.
With an excellent power-to-size ratio the unit is able to
complete a wide range of HDD projects.
DRIVE CHUCK
Part #
230980001
230945001
249169001
249166001
247261985
296273550
276323001
DRILL STEM
Part #
222276001
249187001
Description
S/N# 383 AND BELOW: FST I 2.375" (6 cm) #600 - INCLUDES
SUB SAVER
S/N# 383 AND BELOW: FST I 2.375" (6 cm) #600
SUB SAVER - [7.5” (19.1 cm) O.A. LENGTH]
S/N# 384 AND ABOVE: FST I 2.375" (6 cm) #600 - INCLUDES
SUB SAVER
S/N# 384 AND ABOVE: FST I 2.375" (6 cm) #600
SUB SAVER - [9.5” (24.1 cm) O.A. LENGTH]
TORQ-LOK
FST I 2.375" (6 cm) #600 - INCLUDES SUB SAVER D24X40 SERIES II ONLY
SUB FST I 2.375" (6 cm) #600 - D24X40 SERIES II ONLY
[12" (30.5 cm) O.A. LENGTH]
Description
2.375" (6 cm) FST I #600 X 10' (3 m)
UPSET GAUGE, FST I 2.375" (6 cm)
STARTER ROD HEX
Part #
Description
234826001
2.375" (6 cm) FST I #600 X 2.125” (5.4 cm) HEX
234827001
STD. HEX COLLAR
289273001
296343244
HEX COLLAR - 2.125" (5.4 cm) WITH HARDFACE AND
SHARK TEETH
4478003
CAPSCREW — .375" (1 cm)/16 (40.6 cm) X .375" (1 cm)
240591001
281393001
FOR HEX COLLAR STARTER RODS (Do not use with TRI HAWK
drill heads.)
STARTER ROD HAWKEYE
Part #
Description
296309387
STARTER ROD ASS'Y - HAWKEYE 350 (B) X 2.375" (6 cm)
FST I #600 (B)
296309391
TORQUE SLEEVE - HAWKEYE 350 WITH CARBIDE
296309373
BOLT - SHCS .375" (1 cm)-16" (40.6 cm)- X .375" (1 cm)
296309374
296309375
PLUG - HAWKEYE 275, .375" (.9 cm) -16 X .25" (.6 cm)
296309376
O-RING 121
78
DRIVE CHUCK
TORQ-LOK
SUB SAVER
UPSET GAUGES
STARTER ROD
HEX COLLARS
SPLINELOK II
HAWKEYE STARTER ROD
MEDIUM HDD
D24x40, D24x40A, D24x40 SERIES II
Part #
Description
272462001
(to use D24x40 tools)
284957001
3.5"(8.9 cm) SPLK II X 2.38" (6 cm) FST I #600
280462001
Part #
Description
226638001
296351789
296281894
SONDE LID (FOR 226638001, 296351789, 296255579)
296251785
REG BOX
246811001
284944001
141064001
4478003
296255554
O-RING 2.125" (5.4 cm)
296279190
NOZZLE (FOR 226638001, 296351789, 296251785)
296351780
(6 cm) 8-UNC (B) X (B)
296351755
251823001
296268967
296268966
296268969
296268968
296309448
296294367
296351789)
296309383
289417001
289403001
REG (P) (USE WITH 296255579)
ROD RECYCLER
Part #
Description
246952001
2.375" (6 cm) FST I #600 (B)
296312683
2.375" (7 cm) FST I #600 (B)
DIRT HEAD
ADAPTERS
UNIVERSAL HOUSING
ROD RECYCLER
79
MEDIUM HDD
TRIHAWK DRILL
Part #
284249001
296255360
289327001
284970001
296257837
296257839
296260153
296260154
289311001
289318001
284969001
HEADS
Description
HEX TRIHAWK I
HEX TRIHAWK II
HEX TRIHAWK III
Part #
Description
286664001
296260177
296257840
TRIHAWK ASSEMBLY
TRIHAWK I
TRIHAWK II
TRIHAWK III
TRIHAWK IV
Part #
Description
284951001
284178001
284973001
296257841
296260211
TRIHAWK TEETH
Part #
251871001
251872001
286550001
284177001
251887001
280416001
284975001
296260180
251817001
280407001
296257832
296257831
251823001
289403001
289417001
80
& ACCESSORIES
Description
TRIHAWK II BIT
TRIHAWK II TOOTH
.5" X 1.25" (1.3 cm X 3.2 cm)
TRIHAWK III TOOTH
.5" X 2.125" (1.3 cm X 5.4 cm)
BIT SUB
BIT SUB
TRIHAWK V) — .5" X 2.5" (1.3 cm X 6.4 cm)
HEX 2.125" (5.4 cm) HEX PINS 2.375" (6 cm)
SPLK II 3.5" (8.9 cm) BOX X 2.375" (6 cm)
TRIHAWK V
DIRT BIT ADAPTER
TRIHAWK II TEETH
TRIHAWK LID
SOLID PINS
TRIHAWK III
PULLBACK PIN
SPLINELOK
ROLL PINS
SPLINELOK
SOLID PINS
PUNCH KIT
TRANSMITTER
ISOLATORS
MEDIUM HDD
Description
Part #
251823001
PINS — .5" X 2.5" (1.3 cm X 6.4 cm)
289254001
PINS — .625" X 2.38" (1.6 cm X 6 cm)
296257842
.5" X 2.5" (1.3 cm X 6.4 cm) SET OF 8 PCS
296255530
.688" X 3.25" (1.7 cm X 8.3 cm) SET OF 8 PCS
284921001
284757001
DIRT BIT ADAPTER
TRIHAWK II TEETH
TRIHAWK LID
SOLID PINS
TRIHAWK III
PULLBACK PIN
SPLINELOK
ROLL PINS
SPLINELOK
SOLID PINS
PUNCH KIT
TRANSMITTER
ISOLATORS
81
MEDIUM HDD
D33x44
Designed to do the job. The D33x44 Navigator HDD is a compact
unit designed for a wide range of medium-diameter, mid- to longdistance applications, including easement work, and road, river and
creek crossings. The D33x44 utilizes a rack-and-pinion drive system
and offers three-speed rotational operation for varying ground
conditions and backreamers. The operator’s station offers electricover-hydraulic thrust and rotation controls that incorporate the breakout
system, fluid pump, throttle and other machine functions.
DRIVE CHUCK
Part #
284142001
284144001
247261985
296309648
296309650
DRILL STEM
Part #
294566001
284153001
294642001
290535001
296309599
296312531
296328318
296328320
296309573
Description
FST II 2.375" (6 cm) WITH SUB SAVER
FST II 2.375" (6 cm) SUB SAVER
TORQ-LOK
2.375" (6 cm) FST I #650 DRIVE CHUCK WITH SUB SAVER
2.375" (6 cm) FST I #650 SUB SAVER
Description
2.375" (6 cm) FST II X 10' (3 m)
2.375" (6 cm) FST II X 15' (4.6 m)
2.625" (6.7 cm) FST II X 15' (4.6 m)
2.38"/2.63" (6 cm/6.7 cm) FST II UPSET GAUGE
2.375" (6 cm) FST I #650 X 10’ (3 m)
2.375" (6 cm) FST I #650 X 15’ (4.6 m)
2.375" (6 cm) FST I #650 UPSET GAUGE
2.625" (6.7 cm) FST I #700 UPSET GAUGE
2.35"/2.625" (6 cm/6.7 cm) FST I #650 THREAD GAUGE
STARTER ROD HEX
Part #
Description
284148001
HEX 2.375" (6 cm) FST II
234827001
STD. HEX COLLAR
289273001
296343244
HEX COLLAR - 2.125" (5.4 cm) WITH HARDFACE AND
SHARK TEETH
4478003
CAPSCREW — .375" (1 cm)/16 X .375" (1 cm)
240591001
CAPSCREW — .50" (1.3 cm)/13 X .50" (1.3 cm)
281393001
1.375" (3.5 cm) x .625" (1.6 cm) X .375" (1 cm) SEAL WASHER
drill heads.)
296309646
HEX 2.375" (6 cm) #650 STARTER ROD
STARTER ROD HAWKEYE
Part #
Description
296312527
STARTER ROD ASS'Y - HAWKEYE 428 (B) X FST I #700 (B)
296309393
296309373
BOLT - SHCS 3/8-16- X .38
296309374
NOZZLE - HAWKEYE 275, 3/8-16 X .25
296309375
PLUG - HAWKEYE 275 3/8 - 16 X .25
296309411
O-RING 121
296309412
TORQUE COLLAR WITH CARBIDE HAWKEYE 427
82
DRIVE CHUCK
TORQ-LOK
SUB SAVER
UPSET GAUGES
STARTER ROD
HEX COLLARS
SPLINELOK II
HAWKEYE STARTER ROD
MEDIUM HDD
D33x44
Part #
Description
272462001
3.5" (8.9 cm) SPLK II (P) X 1.66" (4.2 cm) FST I #200 (to use D24x40 tools)
284958001
SPLK II 3.5" (8.9 cm) X 2.375" (6 cm) FST II
O-RING — 3.5 SPLK
280462001
296312568
3.5" (8.9 cm) SPLK II (P) X 2.375" (6 cm) FST #650 (B)
Part #
Description
226638001
296351789
296255579
3.25" (8.3 cm) OD SIDELOAD HOUSING X 2.375" (6 cm) API
REG BOX
296281894
SONDE LID (FOR 226638001, 296351789, 296255579)
296351791
3.25" (8.3 cm) OD SUBSITE SIDELOAD HOUSING X 2.375" (6 cm)
API REG BOX
246811001
284944001
141064001
SONDE LID BOLT (FOR 226638001, 296351789, 296255579,
296351791)
4478003
LID RETAINER BOLT (FOR 22638001, 296351789, 296255579,
296351791)
296255554
O-RING 2.125" (5.4 cm)
296279190
NOZZLE (FOR 226638001, 296351789, 296255579, 296351791)
296351765
3.5" (8.9 cm) OD SIDELOAD UNIVERSAL HOUSING - 2.375"
(6 cm) API REG (B) X (B)
296351755
251823001
296257756
2.375" (6 cm) API REG DIRT BIT ADAPTER - UNIVERSAL
HOUSING
296263876
2.375" (6 cm) API REG (P) X TRIHWAK (P) ADAPTER
UNIVERSAL HOUSING
296268785
2.375" (6 cm) API REG SEWER DRILL HEAD CONVERSION KIT UNIVERSAL HOUSING
296260248
2.375" (6 cm) API REG SEWER BIT ASS’Y - UNIVERSAL
HOUSING
296257764
TRANSMITER PITCH ADJUSTMENT BLOCK ASS’Y UNIVERSAL HOUSING
296294367
296351789)
296309383
289417001
289403001
REG (P) (USE WITH 296255579, 296351791, 296351765)
296331748
296309396
ROD RECYCLER
Part #
Description
284147001
FST II 2.375" (6 cm)
296312708
ROD RECYCLER 2.375" (6 cm) #650 (P)
SPLINELOK II
DIRT HEAD
ADAPTERS
UNIVERSAL HOUSING
ROD RECYCLER
83
MEDIUM HDD
D33x44
TRIHAWK DRILL
Part #
284249001
296255360
289327001
284970001
296257837
296257839
296260153
296260154
289311001
289318001
284969001
HEADS
Description
HEX TRIHAWK I
HEX TRIHAWK II
HEX TRIHAWK III
Part #
Description
286664001
296260177
296257840
Part #
Description
284951001
284178001
284973001
296257841
296260211
TRIHAWK TEETH
Part #
251871001
251872001
286550001
284177001
251887001
280416001
284975001
296260180
251817001
280407001
296257832
296257831
251823001
289403001
289417001
84
& ACCESSORIES
Description
TRIHAWK II BIT
TRIHAWK II TOOTH
.5" X 1.25" (1.3 cm X 3.2 cm)
TRIHAWK III TOOTH
.5" X 2.125" (1.3 cm X 5.4 cm)
BIT SUB
BIT SUB
TRIHAWK V) — .5" X 2.5" (1.3 cm X 6.4 cm)
HEX 2.125" (5.4 cm) HEX PINS 2.375" (6 cm)
SPLK II 3.5" (8.9 cm) BOX X 2.375" (6 cm)
TRIHAWK ASSEMBLY
TRIHAWK I
TRIHAWK II
TRIHAWK III
TRIHAWK IV
TRIHAWK V
DIRT BIT ADAPTER
TRIHAWK II TEETH
TRIHAWK LID
SOLID PINS
TRIHAWK III
PULLBACK PIN
SPLINELOK
ROLL PINS
SPLINELOK
SOLID PINS
PUNCH KIT
TRANSMITTER
ISOLATORS
MEDIUM HDD
D33X44
Description
Part #
251823001
PINS — .5" X 2.5" (1.3 cm x 6.4 cm)
289254001
PINS — .625" X 2.38" (1.6 cm X 6 cm)
296257842
.5" X 2.5" (1.3 cm X 6.4 cm) SET OF 8 PCS
296255530
.688" X 3.25" (1.7 cm X 8.3 cm) SET OF 8 PCS
284921001
284757001
DIRT BIT ADAPTER
TRIHAWK II TEETH
TRIHAWK LID
SOLID PINS
TRIHAWK III
PULLBACK PIN
SPLINELOK
ROLL PINS
SPLINELOK
SOLID PINS
PUNCH KIT
TRANSMITTER
ISOLATORS
85
MEDIUM HDD
D36x50, D36x50 SERIES II
Tackle tougher bores with greater efficiency. The D36x50
Series II offers features and options designed with the
operator in mind. Features including AutoDrill, a MultiFunction Display and climate-controlled cab, help enhance
efficiency and productivity. With the highest power-to-size
ratio in its class and narrowly designed rack-and-pinion for a
small footprint, the D36x50 Series II is built to perform.
DRIVE CHUCK
Part #
284142001
284144001
247261985
296309648
296309650
296309505
296309507
DRILL STEM
Part #
294566001
284153001
294642001
290535001
296309599
296312531
296309521
296309522
296328318
296328320
296309573
Description
FST II 2.375" (6 cm) WITH SUB SAVER
FST II 2.375" (6 cm) SUB SAVER
TORQ-LOK
D36X50 SERIES II S/N 475 CHANGED TO FST I
FST I 2.375” (6 cm) #650 DRIVE CHUCK WITH SUB SAVER
FST I 2.375” (6 cm) #650 SUB SAVER
FST I 2.625" (6.7 cm) #700 DRIVE CHUCK WITH SUB SAVER
FST I 2.625" (6.7 cm) #700 SUB SAVER
Description
FST II 2.375" (6 cm) X 10' (3 m)
FST II 2.375" (6 cm) X 15' (4.6 m)
FST II 2.625" (6.7 cm) X 15' (4.6 m)
UPSET GAUGE, 2.38"/2.63" (6 cm/6.7 cm)
D36X50 SERIES II S/N 475 CHANGED TO FST I
FST I 2.375" (6 cm) #650 X 10’ (3 m)
FST I 2.375" (6 cm) #650 X 15’ (4.6 m)
FST I 2.625" (6.7 cm) #700 X 10’ (4.6 m)
FST I 2.625" (6.7 cm) #700 X 15’ (3.1 m)
2.375" (6 cm) FST I #650 UPSET GAUGE
2.625" (6.7 cm) FST I #700
2.35"/2.625" (6 cm/6.7 cm) FST I #650 THREAD GAUGE
STARTER ROD HEX
Part #
Description
284148001
HEX 2.375" (6 cm) FST II
234827001
STD. HEX COLLAR
289273001
4478003
CAPSCREW — .375" (1 cm)/16 (40.6 cm) X .375" (1 cm)
240591001
281393001
drill heads.)
296309646
HEX 2.375" (6 cm) #650 STARTER ROD
296321280
HEX 2.625" (6.7 cm) X FST I #700
86
DRIVE CHUCK
TORQ-LOK
SUB SAVER
UPSET GAUGES
STARTER ROD
HEX COLLARS
HAWKEYE STARTER ROD
MEDIUM HDD
STARTER ROD HAWKEYE
Part # Description
STARTER ROD ASS'Y - HAWKEYE 426 (B) X 2.375" (6 cm) #650 (B)
296328456
296312566
STARTER ROD ASS’Y - HAWKEYE 350 (B) X 2.375" (6 cm) #650 (B)
296309393
296309373
BOLT - SHCS .375 (.9 cm) -16 X .38" (1 cm)
296309374
NOZZLE - HAWKEYE 275, .375 (.9 cm) - 16 X .25" (.6 cm)
296309375
PLUG - HAWKEYE 275 .375 (.9 cm) - 16 X .25" (.6 cm)
296309411
O-RING 121
296309404
427 HAWKEYE X 2.5" (6.4 cm)
296309412
TORQUE COLLAR WITH CARBIDE - HAWKEYE 427
296312527
427 HAWKEYE (B) X 2.62" (6.7 cm)) FST I #700
Part #
Description
284958001
SPLK II 3.5" (8.9 cm) X 2.375" (6 cm) FST II
280462001
O-RING — 3.5” (8.9 cm) SPLK
296312528
SPLK 3.5" (8.9 cm) X 2.62" (6.7 cm) FST I #700
296312568
SPLK 3.5" (8.9 cm) X 2.375" (6 cm) FST I #650
Part #
Description
226638001
296351789
296255579
3.25" (8.3 cm) OD SIDELOAD HOUSING X 2.375" (6 cm) API
REG BOX
296281894
SONDE LID (FOR 226638001, 296351789, 296255579)
296351791
3.25" (8.3 cm) OD SUBSITE SIDELOAD HOUSING X 2.375" (6 cm)
API REG BOX
246811001
284944001
141064001
SONDE LID BOLT (FOR 226638001, 296351789, 296255579,
296351791)
4478003
LID RETAINER BOLT (FOR 22638001, 296351789, 296255579,
296351791)
296255554
O-RING 2.125" (5.4 cm)
296279190
NOZZLE (FOR 226638001, 296351789, 296255579, 296351791)
296351765
3.5" (8.9 cm) OD SIDELOAD UNIVERSAL HOUSING - 2.375"
(6 cm) API REG (B) X (B)
296351755
251823001
296257756
2.375" (6 cm) API REG DIRT BIT ADAPTER - UNIVERSAL
HOUSING
296263876
2.375" (6 cm) API REG (P) X TRIHAWK (P) ADAPTER
UNIVERSAL HOUSING
296268785
2.375" (6 cm) API REG SEWER DRILL HEAD CONVERSION KIT UNIVERSAL HOUSING
296260248
2.375" (6 cm) API REG SEWER BIT ASS’Y - UNIVERSAL
HOUSING
296257764
TRANSMITER PITCH ADJUSTMENT BLOCK ASS’Y UNIVERSAL HOUSING
296294367
296351789)
296309383
HAWKEYE STARTER ROD
SPLINELOK II
DIRT HEAD
ADAPTERS
UNIVERSAL HOUSING
87
MEDIUM HDD
DRILL HEADS AND ACCESSORIES continued
Part # Description
289417001
289403001
REG (P) (USE WITH 296255579, 296351791, 296351765)
296331748
296309396
ROD RECYCLER
Part #
284147001
296312713
296312708
Description
FST II 2.375" (6 cm)
ROD RECYCLER 2.625" (6.7 cm) FST I #700 (P)
ROD RECYCLER 2.375" (6 cm) FST I #650 (P)
TRIHAWK DRILL
Part #
284249001
296255360
289327001
284970001
296257837
296257839
296260153
296260154
289311001
289318001
284969001
HEADS
Description
HEX TRIHAWK I
HEX TRIHAWK II
HEX TRIHAWK III
TRIHAWK I SUB SITE HOUSING 2.12” (5.4 cm) HEX (P)
TRIHAWK III SUB SITE HOUSING 2.12” (5.4 cm) HEX (P)
Part #
Description
286664001
296260177
296257840
Part #
Description
284951001
284178001
284973001
296257841
296260211
TRIHAWK TEETH
Part #
251871001
251872001
286550001
284177001
251887001
280416001
284975001
296260180
88
& ACCESSORIES
Description
TRIHAWK II BIT
TRIHAWK II TOOTH
.5" X 1.25" (1.3 cm X 3.2 cm)
TRIHAWK III TOOTH
DIRT HEAD
ROD RECYCLER
TRIHAWK ASSEMBLY
TRIHAWK I
TRIHAWK II
TRIHAWK III
TRIHAWK IV
TRIHAWK V
DIRT BIT ADAPTER
TRIHAWK II TEETH
TRIHAWK LID
SOLID PINS
TRIHAWK III
PULLBACK PIN
MEDIUM HDD
Description
Part #
251817001
.5" X 2.125" (1.3 cm X 5.4 cm)
280407001
296257832
BIT SUB
296257831
BIT SUB
251823001
TRIHAWK V) — .5" X 2.5" (1.3 cm x 6.4 cm)
289403001
HEX 2.125" (5.4 cm) HEX PINS 2.375" (6 cm)
289417001
SPLK II 3.5" (8.9 cm) BOX X 2.375" (6 cm)
251823001
PINS — .5" X 2.5" (1.3 cm X 6.4 cm)
289254001
PINS — .625" X 2.38" (1.6 cm X 6 cm)
296257842
.5" X 2.5" (1.3 cm X 6.4 cm) SET OF 8 PCS
296255530
.688" X 3.25" (1.7 cm X 8.3 cm) SET OF 8 PCS
284921001
284757001
TRIHAWK II TEETH
TRIHAWK LID
SOLID PINS
TRIHAWK III
PULLBACK PIN
SPLINELOK
ROLL PINS
DIRT BIT ADAPTER
SPLINELOK
SOLID PINS
PUNCH KIT
89
90
BITS
D16x20 - D40x40
BACK OF TAB
MEDIUM HDD
BITS
BOLT-ON, PLATE-STYLE FOR STD./DIRT HEADS
Part #
Description
STD. DIRT 4" X 12" (10.2 cm x 30.5 cm) —
296255326
1" (3 cm) PLATE STEEL
296255327
STD. DIRT 4.5" X 12" (11.4 cm X 30.5 cm) —
296255328
STD. DIRT 5" X 12" (12.7 cm X 30.5 cm) —
246740001
HARDFACED ECONO BIT 4" X 11.64" (10.2 cm X 29.6 cm)
— .75" (1.9 cm) CAST STEEL
246741001
HARDFACED ECONO BIT 4.5" X 11.64"
(11.4 cm X 29.6 cm) — .75" (1.9 cm) CAST STEEL
246742001
HARDFACED 5" X 11.64" (12.7 cm X 29.6 cm)
— ECONO BIT .75" (1.9 cm) CAST STEEL
296255337
HARDFACED 4" X 12" (10.2 cm X 30.5 cm) —
1" (2.5 cm) PLATE STEEL
296255338
HARDFACED 4.5" X 12" (11.4 cm X 30.5 cm) —
296255339
HARDFACED 5" X 12" (12.7 cm X 30.5 cm) —
296255331
QUICK SHOT 4" X 12" (10.2 cm X 30.5 cm) —
296255332
QUICK SHOT 4.5" X 12" (11.4 cm X 30.5 cm) —
296255333
QUICK SHOT 5" X 12" (12.7 cm X 30.5 cm) —
296255334
QUICK SHOT HARDFACED 4" X 12" (10.2 cm X 30.5 cm) —
296255335
QUICK SHOT HARDFACED 4.5" X 12"
(11.4 cm X 30.5 cm) — 1" (2.5 cm) PLATE STEEL
296255336
QUICK SHOT HARDFACED 5" X 12" (12.7 cm X 30.5 cm) —
296255584
DOUBLE CHEVRON II 4" X 12" (10.2 cm X 30.5 cm) —
1" (2.5 cm) CAST STEEL
296255585
DOUBLE CHEVRON II 4.5" X 12" (11.4 cm X 30.5 cm) —
1" (2.5 cm) CAST STEEL
235187001
SHARK 3.5" X 11.29" (8.9 cm X 28.7 cm) —
.75" (1.9 cm) CAST STEEL
235190001
SHARK 4" X 11.29" (10.2 cm X 28.7 cm) —
235193001
SHARK 4.5" X 11.29" (11.4 cm X 28.7 cm) —
235196001
SHARK 5" X 11.41" (12.7 cm X 29 cm) —
289372001
VCT 4" X 12" (10.2 cm X 30.5 cm) — 1" (2.5 cm) PLATE STEEL
289373001
VCT 4.5" X 12" (11.4 cm X 30.5 cm) —
289374001
VCT 5" X 12" (12.7 cm X 30.5 cm) — 1" (3 cm) PLATE STEEL
296255746
VCT — QUICK SHOT 4" X 12" (10.2 cm x 30.5 cm) —
296255747
VCT — QUICK SHOT 4.5" X 12" (11.4 cm X 30.5 cm) —
296255748
VCT — QUICK SHOT 5" X 12" (12.7 cm X 30.5 cm) —
STANDARD
QUICK-SHOT
STD. HARDFACED
SHARK
VCT WITH HOLE
VCP WITH HOLE
VCTT
ROTARY BIT
93
MEDIUM HDD
BITS
BOLT-ON, PLATE-STYLE FOR STD./DIRT HEADS (continued)
Description
Part #
296314231
ROTARY BIT - 4.50” X 11.88” (11.4 cm X 30.2 cm)
296314233
ROTARY BIT - 4.50” X 11.88” QUICK SHOT (11.4 cm X 30.2 cm)
296309425
VCT 4" X 12" (10.2 cm X 30.5 cm) QUICK SHOT WITH HF AND
CARBIDE BUTTONS
289378001
VCP 4" X 12" (10.2 cm X 30.5 cm) — 1" (2.5 cm) PLATE STEEL
289379001
VCP 4.5" X 12" (11.4 cm X 30.5 cm) —
289380001
VCP 5" X 12" (12.7 cm X 30.5 cm) — 1" (2.5 cm) PLATE STEEL
296255734
VCP — QUICK SHOT 4" X 12" (10.2 cm X 30.5 cm) —
296255735
VCP — QUICK SHOT 4.5" X 12" (11.4 cm X 30.5 cm) —
296255736
VCP — QUICK SHOT 5" X 12" (12.7 cm X 30.5 cm) —
296255713
VCTT 4" X 12" (10.2 cm X 30.5 cm) —
296255714
VCTT 4.5" X 12" (11.4 cm X 30.5 cm) —
296255715
VCTT 5" X 12" (12.7 cm X 30.5 cm) —
296334309
GLADIATOR SPEAR 3.5" (8.9 cm) X 12.5" (31.8 cm) WITH HOLE
296334328
GLADIATOR SPEAR 4" (10.2 cm) X 12.5" (31.8 cm) WITH HOLE
296334306
GLADIATOR SPEAR 4.5" (11.4 cm) X 12.5" (31.8 cm) WITH HOLE
296334359
GLADIATOR SPEAR 5" (12.7 cm) X 12.5" (31.8 cm) WITH HOLE
296334312
GLADIATOR MALLET 3.5" (8.9 cm) X 12" (30.5 cm) WITH HOLE
296334324
GLADIATOR MALLET 4" (10.2 cm) X 12" (30.5 cm) WITH HOLE
296334303
GLADIATOR MALLET 4.5" (11.4 cm) X 12" (30.5 cm) WITH HOLE
296334356
GLADIATOR MALLET 5" (12.7 cm) X 12" (30.5 cm) WITH HOLE
296334350
GLADIATOR CLUB 3.5" (8.9 cm) X 12" (30.5 cm) WITH HOLE
296334326
GLADIATOR CLUB 4" (10.2 cm) X 12" (30.5 cm) WITH HOLE
296334300
GLADIATOR CLUB 4.5" (11.4 cm) X 12" (30.5 cm) WITH HOLE
296334353
GLADIATOR CLUB 5" (12.7 cm) X 12" (30.5 cm) WITH HOLE
BIT BOLTS
Part #
129667010
VCP WITH HOLE
VCTT
GLADIATOR SPEAR
GLADIATOR MALLET
GLADIATOR CLUB
Description
.5" (1.3 cm) – 13" (33 cm) X 1" (2.5 cm) socket head
BIT BOLTS
94
REAMERS
D16x20 - D40x40
BACK OF TAB
MEDIUM HDD
NOTE: the API connection rating to the machines is for reamers only. In many cases, you will use a smaller API connection with drill heads.
D24X26 and SmallerFLUTED REAMER —WITH 2.375" (6 cm) API (REG)WITH 24K SWIVEL
Part #
Description
USE 281391001 SHACKLE
296258154
296258156
296260059
296260061
296260063
296260065
296258153
296258155
296260058
296260060
296260062
296260064
D24X26 and Smaller WING MIXER WITH BELL — WITH 2.375" (6 cm) API (REG)
Part #
Description
296258008
8" (20.3 cm)
296258010
10" (25.4 cm)
296258012
12" (30.5 cm)
296258014
14" (35.6 cm)
296258016
16" (40.6 cm)
DUCK BILL REAMERS
Part #
Description
296352023
296343122
API FLUTED SHARK
API FLUTED ROTARY
WING MIXER WITH BELL
DUCK BILL REAMER
97
MEDIUM HDD
WING CUTTER WITH 2.375” (6 cm) API (REG)
Part #
Description
296259129
8" (20.3 cm)
296259131
10" (25.4 cm)
HELICAL PLUS WITH 2.375” (6 cm) API (REG)
Part #
Description
296268800
8" (20.3 cm)
296268801
10" (25.4 cm)
296268802
12" (30.5 cm)
BELL WITH TEETH WITH 2.375” (6 cm) API (REG) THROUGH SPUD
Part #
Description
296259154
6" (15.2 cm)
296259155
8" (20.3 cm)
296259156
10" (25.4 cm)
296259157
12" (30.5 cm)
WING CUTTER
HELICAL PLUS
BELL WITH TEETH
SPIRAL SHARKWITH 2.375”(6 cm) API (REG)WITH 24K SWIVEL - Use 281391001 Shackle
Part #
Description
296259065
6" (15.2 cm)
296259067
8" (20.3 cm)
296259069
10" (25.4 cm)
296259071
12" (30.5 cm)
98
SPIRAL SHARK
MEDIUM HDD
API REAMERS, VERMEER D40X40 DRILLS (or 50,000 lb pull & 6,000 ft-lb. torque or less)
WING CUTTER WITH 2.875” (7.3 cm) API (REG)
Description
Part #
296259132
8" (20.3 cm)
296259136
10" (25.4 cm)
BELL WITH TEETH WITH 2.875” (7.3 cm) API (REG)
Part #
Description
296259178
8" (20.3 cm)
296259179
10" (25.4 cm)
296259180
12" (30.5 cm)
SPIRAL SHARK WITH 2.875” (7.3 cm) API (REG) WITH 50K SWIVEL
Part #
Description
296259084
8" (20.3 cm)
296259087
10" (25.4 cm)
296259089
12" (30.5 cm)
296259120
14" (35.6 cm)
296259121
16" (40.6 cm)
296259122
18" (45.7 cm)
SUPER FLUTE REAMER WITH 2.875” (7.3 cm) API (REG) WITH 24K SWIVEL
Part #
Description
296263731
10" (25.4 cm) SHARK
296263732
12" (30.5 cm) SHARK
296263733
14" (35.6 cm) SHARK
296263734
16" (40.6 cm) SHARK
296263735
18" (45.7 cm) SHARK
296263736
10" (25.4 cm) ROTARY
296263737
296263738
14" (365.6 cm) ROTARY
296263739
296263740
SUPER FLUTE REAMER WITH 2.875” (7.3 cm) API (REG) - No Swivel
Part #
Description
296263697
10" (25.4 cm) SHARK
296263698
12" (30.5 cm) SHARK
296263699
14" (35.6 cm) SHARK
296263700
16" (40.6 cm) SHARK
296263701
18" (45.7 cm) SHARK
296263702
296263703
296263704
296263705
296263706
WING CUTTER
BELL WITH TEETH
SPIRAL SHARK
SUPER FLUTE
SUPER FLUTE
Note: All API Reamers without swivels come box up (toward machine), pin down
99
MEDIUM HDD
API REAMERS, VERMEER D40X40 DRILLS (or 50,000 lb pull & 6,000 ft-lb. torque or less)
T-REX REAMER WITH 2.875” (7.3 cm) API - SWIVEL
Part #
Description
296309260
8” (20.3 cm) T-REX 2.875” (7.3 cm) API WITH 50K SWIVEL
296309261
296309262
296309263
296309264
296309265
296309266
296309267
296309268
24” (61 cm) T-REX 2.875” (7.3 cm) API WITH 50K SWIVEL
T-REX REAMER WITH 2.875” (7.3 cm) API - THRU SPUD
Part #
Description
296309251
8” (20.3 cm) T-REX 2.875” (7.3 cm) API THRU SPUD
296309252
296309253
296309254
296309255
296309256
296309257
296309258
296309259
24” (61 cm) T-REX 2.875” (7.3 cm) API THRU SPUD
MIX MASTER REAMER WITH 2.875” (7.3 cm) API THRU SPUD
Part # Description
296320141
8” (20.3 cm) MIX MASTER 2.875” (7.3 cm) API THRU SPUD
296320142
296320143
296320144
296320145
296320146
296320147
296320148
296320149
24” (61 cm) MIX MASTER 2.875” (7.3 cm) API THRU SPUD
100
T-REX
MIX MASTER
MEDIUM HDD
BAR-CUTTER — 2.125" (5.4 cm) HEX
Description
Part #
232536001
8" (20.3 cm)
232537001
10" (25.3 cm)
227720001
12" (30.5 cm)
232538001
14" (35.6 cm)
232539001
16" (40.6 cm)
WING-CUTTER WITH ROTARY TEETH — 2.125" (5.4 cm) HEX
Part #
Description
232541001
8.5" (21.6 cm)
232542001
10.75" (27.3 cm)
227718001
12.75" (32.4 cm)
232543001
14.75" (37.5 cm)
232544001
16.5" (41.9 cm)
HELICAL — 2.125" (5.4 cm) HEX
Part #
Description
232672001
6" (15.2 cm)
232673001
8" (20.3 cm)
232674001
10" (25.3 cm)
232675001
12" (30.5 cm)
SUPER HELICAL
Part #
284806001
284807001
284808001
284809001
284810001
— 2.125" (5.4 cm) HEX
Description
8" (20.3 cm)
10" (25.3 cm)
12" (30.5 cm)
14" (35.6 cm)
16" (40.6 cm)
HELICAL PLUS — 2.125" (5.4 cm) HEX
Part #
Description
279574001
8" (20.3 cm)
279575001
10" (25.3 cm)
279576001
12" (30.5 cm)
279578001
14" (35.6 cm)
279579001
16" (40.6 cm)
BELL WITH TEETH — 2.125" (5.4 cm) HEX - 24K SWIVEL
Part #
Description
232660001
6.625" (16.8 cm)
232661001
8.625" (21.9 cm)
232662001
10.75" (27.3 cm)
232663001
12.75" (32.4 cm)
232664001
14" (35.6 cm)
232665001
16" (40.6 cm)
SMOOTH BELL (NO TEETH) — 2.125" (5.4 cm) HEX - 24K SWIVEL
Part #
Description
232563001
6.5" (16.5 cm)
232565001
8.5" (21.6 cm)
232567001
10.5" (26.7 cm)
232569001
12.5" (31.8 cm)
232571001
14.5" (36.8 cm)
232573001
16.5" (41.9 cm)
BAR-CUTTER
WING-CUTTER
HELICAL
SUPER HELICAL
HELICAL PLUS
BELL WITH TEETH
101
MEDIUM HDD
SPIRAL/SHARK
Part #
232528001
232659001
232529001
232530001
232531001
227715001
232532001
232533001
232534001
232535001
FLUTED/SHARK
Part #
235063001
235064001
235065001
235066001
235067001
235245001
235247001
— 2.125" (5.4 cm) HEX - 24K SWIVEL
Description
4.5" (11.4 cm) NO TEETH - USE 281383001 SHACKLE
5.5" (14 cm) - USE 281383001 SHACKLE
6.5" (16.5 cm) - USE 281391001 SHACKLE
8" (20.3 cm) - USE 281391001 SHACKLE
10" (25.3 cm) - USE 281391001 SHACKLE
12.75" (32.4 cm) - USE 281391001 SHACKLE
14" (35.6 cm) - USE 281391001 SHACKLE
16" (40.6 cm) - USE 281391001 SHACKLE
18" (45.7 cm) - USE 281391001 SHACKLE
20" (50.8 cm) - USE 281391001 SHACKLE
— 2.125" (5.4 cm) HEX - 24K SWIVEL
Description
4.5" (11.4 cm) - USE 281383001 SHACKLE
6" (15.2 cm) - USE 281383001 SHACKLE
8" (20.3 cm) - USE 281391001 SHACKLE
10" (25.3 cm) - USE 281391001 SHACKLE
12" (30.5 cm) - USE 281391001 SHACKLE
14" (35.6 cm) - USE 281391001 SHACKLE
16" (40.6 cm) - USE 281391001 SHACKLE
FLUTED/ROTARY — 2.125" (5.4 cm) HEX - 24K SWIVEL
Part #
Description
232555001
4.5" (11.4 cm) - USE 281383001 SHACKLE
232557001
6" (15.2 cm) - USE 281383001 SHACKLE
232559001
8" (20.3 cm) - USE 281391001 SHACKLE
232561001
10" (25.3 cm) - USE 281391001 SHACKLE
227722001
12" (30.5 cm) - USE 281391001 SHACKLE
235244001
14" (35.6 cm) - USE 281391001 SHACKLE
235246001
16" (40.6 cm) - USE 281391001 SHACKLE
FLUTED/SHARK
Part #
284106001
281408001
281409001
281410001
281411001
281412001
102
(WITH SWIVEL) — 2.125" (5.4 cm) HEX / 24K PULLING EYES
Description
6" (15.2 cm) - USE 281391001 SHACKLE
8" (20.3 cm) - USE 281391001 SHACKLE
10" (25.3 cm) - USE 281391001 SHACKLE
12" (30.5 cm) - USE 281391001 SHACKLE
14" (35.6 cm) - USE 281391001 SHACKLE
16" (40.6 cm) - USE 281391001 SHACKLE
4.5 SPIRAL/SHARK
NO TEETH
SPIRAL/SHARK
FLUTED/SHARK
FLUTED/ROTARY
FLUTED/SHARK
MEDIUM HDD
D33X40 - D36X50 SERIES II
SPIRAL/SHARK
Part #
232597001
232599001
227712001
232601001
232603001
232605001
232607001
232692001
232693001
— 3.5" (8.9 cm) FIRESTICK #800 50K SWIVEL
Description
8.625" (21.9 cm)
10.75" (27.3 cm)
12.75" (32.4 cm)
14.75" (37.5 cm)
16.75" (42.5 cm)
18.75" (47.6 cm)
20.75" (52.7 cm)
24.75" (62.9 cm)
30" (76.2 cm)
FLUTED/SHARK
Part #
235068001
235069001
235070001
235071001
235072001
235073001
235074001
242124001
235075001
Description
8" (20.3 cm)
10" (25.3 cm)
12" (30.5 cm)
14" (35.6 cm)
16" (40.6 cm)
18" (45.7 cm)
20" (50.8 cm)
22" (55.9 cm)
24" (61 cm)
FLUTED/SHARK
Part #
235077001
235078001
235079001
235080001
235081001
235082001
235083001
242125001
235084001
Description
8" (20.3 cm)
10" (25.3 cm)
12" (30.5 cm)
14" (35.6 cm)
16" (40.6 cm)
18" (46 cm)
20" (50.8 cm)
22" (55.9 cm)
24" (61 cm)
REAMER FRONT
Part #
281473001
289406001
296260221
289420001
ADAPTERS 33X44 (HEX OR SPLINELOK)
Description
2.125” (5.4 cm) HEX(P) X 2.875” (7.3 cm) FST I #900 (P)
2.125” (5.4 cm) HEX(P) X 2.875” (7.3 cm) API REG (P)
3.50” (8.9 cm) SPLK II (B) X 3.50” (8.9 cm) API REG (P)
REAMER FRONT
Part #
296260221
289420001
296266215
296253204
Description
3.50” (8.9 cm) SPLK II (B) X 2.875” (7.3 cm) FST I #900 (P)
SPIRAL/SHARK
FLUTED/SHARK
FLUTED/SHARK
103
MEDIUM HDD
D33XD44 - 36X50 SERIES II
FLUTED/ROTARY — 2.875" (7.3 cm) FIRESTICK #900 - 50K SWIVEL
Description
Part #
232737001
8" (20.3 cm)
232738001
10" (25.3 cm)
232710001
12" (30.5 cm)
232739001
14" (35.6 cm)
232740001
16" (40.6 cm)
232741001
18" (45.7 cm)
232742001
20" (50.8 cm)
242122001
22" (55.8 cm)
232743001
24" (61 cm)
Part #
Description
232728001
8" (20.3 cm)
232729001
10" (25.3 cm)
227695001
12" (30.5 cm)
232730001
14" (35.6 cm)
232731001
16" (40.6 cm)
232732001
18" (45.7 cm)
232733001
20" (50.8 cm)
242123001
22" (55.9 cm)
232734001
24" (61 cm)
REAMER FRONT
Part #
281473001
289406001
296260221
289420001
Description
2.125” (5.4 cm) HEX(P) X 2.875” (7.3 cm) FST I #900 (P)
REAMER FRONT
Part #
296260221
289420001
296266215
296253204
Description
104
FLUTED/ROTARY
FLUTED/ROTARY
MEDIUM HDD
FLUTED/SHARK
Part #
284112001
284113001
284114001
284115001
284116001
284117001
284118001
284119001
(w/o SWIVEL) — 2.875" (7.3 cm) FIRESTICK #900
Description
8" (20.3 cm)
10" (25.3 cm)
12" (30.5 cm)
14" (35.6 cm)
16" (40.6 cm)
18" (45.7 cm)
20" (50.8 cm)
22" (55.9 cm)
FLUTED/SHARK
Part #
281426001
281427001
281428001
281429001
281430001
281431001
281432001
281433001
281434001
(w/o SWIVEL) — 3.5" (8.9 cm) FIRESTICK #800
Description
8" (20.3 cm)
10" (25.3 cm)
12" (30.5 cm)
14" (35.6 cm)
16" (40.6 cm)
18" (45.6 cm)
20" (50.8 cm)
22" (55.9 cm)
24" (61 cm)
SUPER FLUTE REAMER WITH 3.50” API (REG) with 50K SWIVEL
Part #
Description
296263676
10" (25.3 cm) SHARK
296263677
12" (30.5 cm) SHARK
296263678
14" (35.6 cm) SHARK
296263679
16" (40.6 cm) SHARK
296263680
18" (45.7 cm) SHARK
296263682
296263683
296263684
296263685
296263686
REAMER FRONT
Part #
281473001
289406001
296260221
289420001
Description
2.125” (5.4 cm) HEX(P) X 2.875” (7.3 cm) FST I #900 (P)
REAMER FRONT
Part #
296260221
289420001
296266215
296253204
Description
NOTE: All API Reamers without swivels come box up (toward machine), pin down
FLUTED/SHARK
FLUTED/SHARK
SUPER FLUTE REAMER
105
MEDIUM HDD
BAR-CUTTER — 2.875" (7.3 cm) FIRESTICK #900
Part #
Description
232713001
12" (30.5 cm)
232714001
14" (35.6 cm)
16" (40.6 cm)
232715001
BAR-CUTTER
WING-CUTTER WITH ROTARY TEETH — 2.875" (7.3 cm) FIRESTICK #900
Part #
Description
232701001
8.625" (21.9 cm)
232703001
10.75" (27.3 cm)
232635001
12.75" (32.4 cm)
232637001
14.75" (37.5 cm)
232639001
16.75" (42.5 cm)
232641001
18.75" (47.6 cm)
232643001
20.75" (52.7 cm)
232645001
22.75" (57.8 cm)
232647001
24.75" (62.9 cm)
SUPER HELICAL
Part #
284861001
284862001
284863001
284864001
284865001
284866001
284867001
284868001
106
— 2.875" (7.3 cm) FIRESTICK #900
Description
10" (25.3 cm)
12" (30.5 cm)
14" (35.6 cm)
16" (40.6 cm)
18" (45.7 cm)
20" (50.8 cm)
22" (55.9 cm)
24" (61 cm)
WING-CUTTER
SUPER HELICAL
MEDIUM HDD
BELL WITH TEETH — 2.875" (7.3 cm) FIRESTICK #900 - 50K SWIVEL
Description
Part #
232704001
8.5" (21.6 cm)
232706001
10.5" (26.7 cm)
232716001
12.5" (31.8 cm)
232708001
14.5" (36.8 cm)
232717001
16.5" (41.9 cm)
232718001
18.5" (47 cm)
232719001
20.5" (52.1 cm)
232720001
22.5" (57.2 cm)
232721001
24.5" (62.2 cm)
SMOOTH BELL (NO TEETH) — 2.875" (7.3 cm) FIRESTICK #900 - 50K SWIVEL
Part #
Description
232587001
8.5" (21.6 cm)
232589001
10.5" (26.7 cm)
232591001
12.5" (31.8 cm)
232593001
14.5" (36.8 cm)
232595001
16.5" (41.9 cm)
232684001
18.5" (47 cm)
232685001
20.5" (52.1 cm)
SPIRAL/SHARK
Part #
232609001
232611001
232613001
232615001
232617001
232619001
232621001
232688001
232689001
— 2.875" (7.3 cm) FIRESTICK #900 - 50K SWIVEL
Description
8.625" (21.9 cm)
10.75" (27.3 cm)
12.75" (32.4 cm)
14.75" (37.5 cm)
16.75" (42.5 cm)
18.75" (47.6 cm)
20.75" (52.7 cm)
24.75" (62.9 cm)
30" (76.2 cm)
BELL WITH TEETH
SMOOTH BELL
SPIRAL/SHARK
107
108
SWIVELS FOR
D16x20 - D40x40
BACK OF TAB
MEDIUM HDD
ACCESSORIES
SWIVELS — D16x20 – D24x40A
Description
Part #
296258122
DOUBLE-EYE 24,000 lb (10,886.2 kg) — 3.75" (9.5 cm) OD
235170001
SUB ASS’Y 24,000 lb (10,886.2 kg) (For swivel #296258122)
235039001
HEX 2.125" (5.4 cm) 24,000 lb (10,886.2 kg) —
3" (7.6 cm) OD
284960001
SUB ASS’Y 24,000 LB SWIVEL (For swivel #235039001)
232657001
HEX 2.125" (5.4 cm) 24,000 lb (10,886.2 kg) —
5.5" (14 cm) OD
221117001
SUB ASS’Y 24,000 lb (10,886.2 kg) (For swivel # 232657001)
296268965
PULLING EYE 24,000 lb (10,866.2 kg) 2.125" (5.4 cm) HEX (P)
232507001
WELD-ON SWIVEL ASSEMBLY - 24K
SINGLE EYE
DOUBLE EYE
SWIVELS — D33x44 – D40x40
Part #
Description
280486001
HEX 2.125" (5.4 cm) 40,000 lb (18,143.7 kg) —
6.75" (17.2 cm) OD
280485001
SUB ASS’Y 40,000 lb (18,143.7 kg) (For swivel 280486001)
PULLING EYES
Part #
Description
289445001
24,000 lb (10,886.2
289447001
24,000 lb (10,886.2
296268965
24,000 lb (10,886.2
296328358
24,000 lb (10,886.2
296312688
24,000 lb (10.886.2
296312689
24,000 lb (10.886.2
HEX SWIVEL
kg)
kg)
kg)
kg)
kg)
kg)
X
X
X
X
X
X
2.375"
2.875"
2.125"
2.375"
2.375"
2.875"
(6 cm) API REG Reg (B)
(7.3 cm) API REG Reg (B)
(5.4 cm) LPT HEX (P)
(6 cm) FST #600 (P)
(6 cm) API REG Reg (P)
(7.3 cm) API REG (P)
PULLING EYE
111
LARGE HDD
TOOLING
TAB
BACK OF
TAB
LARGE
HDD TOOLING
D50x100, D50x100A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
D55x100, D75x100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
D80x100, D80x100 II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
D80x120, D100x120, D100x120 II . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122
D150x300, D200x300, D300x500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
Large HDD Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
D500x500, D750x900, D1000x900 . . . . . . . . . . . . . . . . . . . . . . . . . . . .127
Large HDD API Reamers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
Large HDD Vermeer Connection Reamers . . . . . . . . . . . . . . . . . . . . .138
Large HDD Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
115
LARGE HDD
D50x100, D50x100A
The Vermeer D50x100A Navigator unit is engineered for
versatile performance. It features powerful rotational torque
capacities — up to 10,000 ft-lb (13,538 Nm) — to match your
drill stem size. With the D50x100A, contractors are better
able to handle adverse jobs like boring through certain kinds
of rock and other hard, organic material. The D50x100A
delivers up to 50,000 lb (22,680 kg) of pullback power to
handle heavier pipe and longer-distance applications,
including sewer projects and riverbed crossings.
DRIVE CHUCK
Part #
222447001
222431001
296255366
296255354
247261985
296268832
296255475
296255477
DRILL STEM
Part #
222452001
222454001
249246001
249247001
296309574
Description
FST I 2.875" (7.3 cm) #900 - One piece
FST I 3.5" (8.9 cm) #800 - One piece
FST I 2.875" (7.3 cm) #900 WITH SUB SAVER
FST I 2.875" (7.3 cm) #900 SUB SAVER
TORQ-LOK
WIRELINE DRIVE CHUCK 3.5" (8.9 cm) FST I X #800 WITH
SUB SAVER
FST I 3.5" (8.9 cm) X #800 DRIVE CHUCK WITH SUB SAVER
SUB SAVER (3.5 FST I) X #800 FOR DRIVE CHUCK PART
#296255475 & #296268832
Description
2.875" (7.3 cm) #900 X 15’ (4.6 m)
3.5" (8.9 cm) FST I #800 X 15' #900 (4.6 m)
UPSET GAUGE, FST I 2.875" (7.3 cm) #900
UPSET GAUGE, FST I 3.5" (8.9 cm) #800
THREAD GAUGE, 2.875"/3.5" (7.3 cm/8.9 cm) FST I #800,
#900, #1000
Part #
Description
296252061
3.5" (8.9 cm) OD SIDELOAD HOUSING X 2.875" (7.3 cm) API
REG BOX
296351766
3.75" (9.5 cm) OD SIDELOAD UNIVERSAL HOUSING X 2.875"
(7.3 cm) API REG BOX X BOX
296268770
2.875" (7.3 cm) API REG DIRT BIT ADAPTER
296268786
2.875" (7.3 cm) API REG SEWER DRILL HEAD CONVERSION KIT
296271751
2.875" (7.3 cm) API REG TRIHAWK BIT ADAPTER
296351767
4.5" (11.4 cm) OD SIDELOAD UNIVERSAL HOUSING 3.5"
296259972
296263877
296268787
ROD RECYCLER
Part #
Description
246949001
FST I 2.875" (7.3 cm) #900
246950001
FST I 3.5" (8.9 cm) #800
116
DRIVE CHUCK
TORQ-LOK
SUB SAVER
UPSET GAUGES
SPLINELOK II
UNIVERSAL HOUSING
ROD RECYCLER
LARGE HDD
D50x100, D50x100A
TRIHAWK DRILL
Part #
251881001
251834001
296260202
296260204
296260203
296260205
HEADS
Description
FST I 2.875" (7.3 cm) #900 TRIHAWK I
FST I 3.5" (8.9 cm) TRIHAWK I
TRIHAWK II STANDARD HOUSING 2.875" (7.3 cm) FST I #900 (B)
TRIHAWK III STANDARD HOUSING 2.875" (7.3 cm) FST I #900 (B)
Part #
Description
280722001
TRIHAWK I EXT. HOUSING 2.875" (7.3 cm) FST I #900 (B)
280721001
296257845
TRIHAWK SONDE HOUSING 2.875" (7.3 cm) API/REG (B)
296260178
TRIHAWK SUB SITE HOUSING 2.875" (7.3 cm) API/REG (B)
Part #
Description
284952001
TRIHAWK I BIT ASSEMBLY — INCLUDES BIT,
LONG TEETH & ROLL PINS
296255473
284981001
296260231
296260212
TRIHAWK TEETH
Part #
284915001
284914001
296260166
280424001
284914001
284983001
296260190
296255468
286662001
251817001
296257834
296260194
251823001
289254001
289394001
289460001
284921001
284757001
& ACCESSORIES
Description
TRIHAWK I BIT TOOTH — MEDIUM
TRIHAWK I BIT TOOTH — LONG
TRIHAWK II BIT
.625" (1.6 cm) X 2" (5 cm)
TRIHAWK II TOOTH
TRIHAWK III TOOTH
TRIHAWK END LOAD HEAD BIT ADAPTER
TRIHAWK BIT-MOUNT ROLL PINS
TRIHAWK 2.875" (7.3 cm) API REG BOX
FRONT BIT SUB
TRIHAWK 3.5" (8.9 cm) API REG BOX
FRONT BIT SUB
PINS — .5" (1.3 cm) X 2.5" (6.4 cm)
PINS — .625" (1.6 cm) X 2.38" (6 cm)
.5" (1.3 cm) X 3.5" (9 cm) — SET OF 8 PCS
.8125" (2.1 cm) X 4.25" (10.8 cm) — SET OF 8 PCS
TRIHAWK ASSEMBLY
TRIHAWK I
TRIHAWK II
TRIHAWK III
TRIHAWK IV
TRIHAWK V
DIRT BIT ADAPTER
TRIHAWK II TEETH
TRIHAWK LID
SOLID PINS
TRIHAWK III
PULLBACK PIN
SPLINELOK
ROLL PINS
SPLINELOK
SOLID PINS
PUNCH KIT
TRANSMITTER
ISOLATORS
117
LARGE HDD
D55x100, D75x100
A powerful and compact HDD for larger applications.
The D55x100 with rack-and-pinion drive system provides
high performance on a range of mid- to large-sized projects.
Featuring 10,000 ft-lb (13,588 Nm) of rotational torque and
55,000 lb (24,948 kg) of pullback, the self-contained
D55x100 brings big power to the job-site in a package
smaller than many other drills in its class.
DRIVE CHUCK
Part #
284094001
284098001
#284094001
222431001
247261985
296268832
296268830
296255475
296255477
#296255475
Description
FST II 2.875" (7.3 cm) SUB SAVER for DRIVE CHUCK PART
& #296268830
FST I I 3.5" (8.9 cm) #800 - One piece
TORQ-LOK
WIRELINE DRIVE CHUCK 3.5" (8.9 cm) #800 FST I WITH SUB
SAVER
WIRELINE DRIVE CHUCK 2.875" (7.3 cm) FST II
FST I 3.5" (8.9 cm) #800 SUB SAVER for DRIVE CHUCK
& #296268832
Part #
Description
296252061
3.5" (8.9 cm) OD SIDELOAD HOUSING 2.875" (7.3 cm) API
REG BOX
296351766
296268770
296268786
296271751
296351767
296259972
296263877
296268787
ROD RECYCLER
Part #
Description
284959001
FST I 2.875" (7.3 cm)
246950001
FST I 3.5" (8.9 cm) X #800
DRIVE CHUCK
TORQ-LOK
SUB SAVER
UPSET GAUGES
UNIVERSAL HOUSING
ROD RECYCLER
118
LARGE HDD
D55x100, D75x100
TRIHAWK DRILL
Part #
296268766
251834001
296260202
296260204
296260203
296260205
HEADS
Description
FST II 2.875" (7.3 cm) TRIHAWK I
FST I 3.5" (8.9 cm) #800 TRIHAWK I
Part #
Description
280722001
280721001
296257845
296260178
Part #
Description
284952001
296255473
284981001
296260231
296260212
TRIHAWK TEETH
Part #
284915001
284914001
296260166
280424001
284914001
284983001
296260190
296255468
286662001
251817001
296257834
296260194
251823001
289254001
289394001
289460001
284921001
284757001
& ACCESSORIES
Description
TRIHAWK II BIT
.625" (1.6 cm) X 2" (5 cm)
TRIHAWK II TOOTH
TRIHAWK III TOOTH
TRIHAWK 2.875" (7.3 cm) API REG (B)
FRONT BIT SUB
TRIHAWK 3.5" (8.9 cm) API REG (B) FRONT BIT SUB
PINS — .5" (1.3 cm) X 2.5" (6.4 cm)
PINS — .625" (1.6 cm) X 2.38" (6 cm)
.5" (1.3 cm) X 3.5" (9 cm) — SET OF 8 PCS
.8125" (2.1 cm) X 4.25" (10.8 cm) — SET OF 8 PCS
TRIHAWK ASSEMBLY
TRIHAWK I
TRIHAWK II
TRIHAWK III
TRIHAWK IV
TRIHAWK V
DIRT BIT ADAPTER
TRIHAWK II TEETH
TRIHAWK LID
SOLID PINS
TRIHAWK III
PULLBACK PIN
SPLINELOK
ROLL PINS
SPLINELOK
SOLID PINS
PUNCH KIT
TRANSMITTER
ISOLATORS
119
LARGE HDD
Power and performance — the D80x100 Series II Navigator
HDD unit is a great choice for the pullback of longer, heavier
products. Designed for more difficult bores, including sewer
and river bed projects, the D80x100 Series II features 10,000
ft-lb (13,558 Nm) of rotational torque and 80,000 lb (36,287
kg) of thrust/pullback. A climate-controlled cab provides 360degree visibility for easy monitoring of all machine functions.
DRIVE CHUCK
Part #
222431001
247261985
296268832
296268830
296255475
296255477
284094001
284098001
DRILL STEM
Part #
222452001
222454001
249246001
249247001
Description
FST I 3.5" (8.9 cm) #800 - One piece
TORQ-LOK
3.5" (8.9 cm) FST I #800 WIRELINE DRIVE CHUCK WITH SUB
SAVER
2.875" (7.3 cm) FST II WIRELINE DRIVE CHUCK
3.5" (8.9 cm) FST I #800 DRIVE CHUCK WITH SUB SAVER
3.5" (8.9 cm) FST I #800 SUB SAVER for DRIVE CHUCK PART
#296255475 & #296268832
2.875" (7.3 cm) FST II DRIVE CHUCK WITH SUB SAVER
2.875" (7.3 cm) FST II SUB SAVER for DRIVE CHUCK PART
#284094001 & #296268830
Description
2.875" (7.3 cm) FST I #900 X 15' (4.6 m)
3.5" (8.9 cm) FST I #800 X 15' (4.6 m)
UPSET GAUGE, FST I 2.875" (7.3 cm)
UPSET GAUGE, FST I 3.5" (8.9 cm)
Part #
Description
296252061
REG BOX
296351766
296268770
296268786
296271751
296351767
296259972
296263877
296268787
ROD RECYCLER
Part #
Description
246949001
FST I 2.875" (7.3 cm) #900
246950001
FST I 3.5" (8.9 cm) #800
120
DRIVE CHUCK
TORQ-LOK
SUB SAVER
UPSET GAUGES
UNIVERSAL HOUSING
ROD RECYCLER
LARGE HDD
D80x100 D80x100 SERIES II
TRIHAWK DRILL
Part #
251881001
251834001
296260202
296260204
296260203
296260205
HEADS
Description
FST I 2.875" (7.3 cm) #900 TRIHAWK I
FST I 3.5" (8.9 cm) #800 TRIHAWK I
TRIHAWK II STANDARD HOUSING 3.5" (8..9 cm) FST I #800 (B)
Part #
Description
280722001
TRIHAWK I EXT. HOUSING 2.875" (7.3 cm) X FST I #900 (B)
280721001
TRIHAWK I EXT. HOUSING 3.5" (8.9 cm) X FST I #800 (B)
296257845
296260178
Part #
Description
284952001
296255473
284981001
296260231
296260212
TRIHAWK TEETH
Part #
284915001
284914001
296260166
280424001
284914001
284983001
296260190
296255468
286662001
251817001
296257834
296260194
251823001
289254001
289394001
289460001
284921001
284757001
& ACCESSORIES
Description
TRIHAWK II BIT
.625" (1.6 cm) X 2" (5 cm)
TRIHAWK II TOOTH
TRIHAWK III TOOTH
FRONT BIT SUB
PINS — .5" (1.3 cm) X 2.5" (6.4 cm)
PINS — .625" (1.6 cm) X 2.38" (6 cm)
.5" (1.3 cm) X 3.5" (9 cm) — SET OF 8 PCS
.8125" (2.1 cm) X 4.25" (10.8 cm) — SET OF 8 PCS
TRIHAWK ASSEMBLY
TRIHAWK I
TRIHAWK II
TRIHAWK III
TRIHAWK IV
TRIHAWK V
DIRT BIT ADAPTER
TRIHAWK II TEETH
TRIHAWK LID
SOLID PINS
TRIHAWK III
PULLBACK PIN
SPLINELOK
ROLL PINS
SPLINELOK
SOLID PINS
PUNCH KIT
TRANSMITTER
ISOLATORS
121
LARGE HDD
D80x120, D100x120, D100x120 SERIES II
The Vermeer D100x120 Series II was designed with a
powerful rack-and-pinion drive system to provide flexibility for a
wide range of horizontal directional drilling projects. The unit
provides 12,000 ft-lb (16,270 Nm) of rotational torque, a 225 hp
(167.8 kW) John Deere engine and thrust/pullback and 100,000
lb (444 kN) of thrust/pullback to help you complete a wide range
of bores in difficult ground conditions.
DRIVE CHUCK - SUB SAVER
Part #
Description
280849001
296255396
FST II 3.5" (8.9 cm) SUB SAVER
247261985
TORQ-LOK
296268773
FST II 3.5" (8.9 cm) WIRELINE SIDE ENTRY DRIVE CHUCK
WITH SUB SAVER
296255396
FST II 3.5" (8.9 cm) SUB SAVER FOR PART #296268773
S/N 405 AND ABOVE MFG WITH FST I
296309516
296309515
FST I 3.5" (8.9 cm) #1000 SUB SAVER
296268953
FST I 3.5" (8.9 cm) #1000 WIRELINE DRIVE CHUCK WITH
SUB SAVER
Note: For drill stem contact Vermeer Cutting Edge at 1-866-VERMEER.
DRILL STEM
Part #
276376001
290539001
296309520
296309321
296309574
Description
3.5" (8.9 cm) FST II X 20' (6.1 m)
UPSET GAUGE, FST II 3.5" (8.9 cm)
S/N 405 AND ABOVE MFG WITH FST I
3.5" (8.9 cm) FST I #1000 X 20’ (6.1 m)
3.5" (8.9 cm) FST I #1000 UPSET GAUGE
THREAD GAUGE, 2.875"/3.5" (7.3 cm/8.9 cm) FST I #800,
#900, #1000
Part #
Description
296351786
REG BOX
296351766
296268770
296268786
296271751
296351767
296259972
296263877
296268787
122
DRIVE CHUCK
TORQ-LOK
SUB SAVER
UPSET GAUGES
UNIVERSAL HOUSING
LARGE HDD
D80x100 D80x100 SERIES II
NON-MAGNETIC TOOLING DESIGNED SPECIFICALLY FOR DCI SST STEERING
Description
Part #
296309467
NON MAG HOUSING WITH BILL 4.70" (11.9 cm)
296309472
NON MAG SONDE HOUSING SUB ASS’Y 4.70" (11.9 cm)
296309468
BLADE MOUNT SUB-ASSEMBLY
296309471
BLADE, 8" X 18" (20.3 cm X 45.7 cm)
296309482
NON MAG STARTER ROD 2.875" (7.3 cm) API IF (P) X 2.875"
(7.3 cm) API IF (B)
296312516
NON MAG TRIHAWK III BIT 4.70" (11.9 cm)
296309481
NON MAG SERVICE KIT
ROD RECYCLER
Part #
284170001
296312714
296312682
Description
3.5" (8.9 cm) FST II
3.5" (8.9 cm) FST I #1000 (P)
3.5" (8.9 cm) FST I #1000 (B)
NON-MAGNETIC HOUSING
ROD RECYCLER
123
LARGE HDD
D80x120, D100x120, D80x120 SERIES II
Description
Part #
296257845
296260178
Part #
Description
284952001
296255473
284981001
296260231
296260212
TRIHAWK TRIHAWK TEETH & ACCESSORIES
Part #
Description
284915001
284914001
296260166
TRIHAWK II BIT
280424001
.625" (1.6 cm) X 2" (5 cm)
284914001
TRIHAWK II TOOTH
284983001
TRIHAWK III TOOTH
296260190
296255469
251817001
TRIHAWK BIT-MOUNT ROLL PINS —
296257834
FRONT BIT SUB
296260194
251823001
PINS — .5" (1.3 cm) X 2.5" (6.4 cm)
289254001
PINS — .625" (1.6 cm) X 2.38" (6 cm)
284921001
284757001
TRIHAWK ASSEMBLY
TRIHAWK I
TRIHAWK II
TRIHAWK III
TRIHAWK IV
TRIHAWK V
DIRT BIT ADAPTER
TRIHAWK II TEETH
TRIHAWK LID
SOLID PINS
TRIHAWK III
PULLBACK PIN
SPLINELOK
ROLL PINS
SPLINELOK
SOLID PINS
PUNCH KIT
TRANSMITTER
ISOLATORS
124
MAXI HDD
Efficiency comes in large sizes. Vermeer realizes that
efficiency is key on jobsites. The D330x550 Navigator HDD
from Vermeer includes a self-contained design providing quick
setup time. All drill functions including transport, crane and
drilling fluids, can be controlled from the comfort of the
climate-controlled operator’s station.
D150x300, D200X300, D330x500
DRIVE CHUCK & SUB SAVER - D200X300
Part #
Description
277857001
FLOATING CUSHION SUB (MINUS LOWER CONNECTION)
296261572
LOWER CONNECTION 4.5" (11.4 cm) IF (P)
296267767
LOWER CONNECTION 6.625" (17.5 cm) REG (P)
296275506
SOLID LOWER CONNECTION ASSEMBLY 4.5" (11.4 cm) IF (P)
DRIVE CHUCK & SUB SAVER - D300X500
Part #
Description
296257792
SUB SAVER 4.5" (11.4 cm) API/IF (BXP)
296257885
SUB SAVER 4.5" (11.4 cm) API/IF (B) X 4.5" (11.4 cm) FH (P)
296257886
SUB SAVER 4.5" (11.4 cm) API/IF (P) X 4.5" (11.4 cm) FH (B)
296275611
SUB SAVER 5.5" (14 cm) API/FH (B) X 4.5" (11.4 cm) FH (P)
296275612
SUB SAVER 5.5" (14 cm) API/FH (B) X 6.625" (16.8 cm)
API/REG (P)
296275675
SUB SAVER 6.625" (16.8 cm) FH (B) X 4.5" (11.4 cm) API/IF (P) 15.5" (39.4 cm) OVERALL LENGTH
296274180
SUB SAVER 6.625" (16.8 cm) FH (B) X 4.5" (11.4 cm) API/IF (P) 16" (40.6 cm) OVERALL LENGTH
296259053
SUB SAVER 6.625" (16.8 cm) FH (B) X (P) - 14" (35.6 cm)
OVERALL LENGTH
SUB SAVER
Note: For drill stem contact Vermeer Cutting Edge at 1-866-VERMEER.
Part #
Description
296312521
4.5" (11.4 cm) API/IF UNIVERSAL HOUSING
296257896
4.5" (11.4 cm) API/IF 8" (20.3 cm) DIRT BIT
296260216
4.5" (11.4 cm) API/IF TRIHAWK III BIT
296260215
TRIHAWK III TEETH
284784001
TRIHAWK III BIT ROLL PIN
284003001
TRIHAWK III BIT ROLL PIN (PKG OF 24)
296312525
TRIHAWK V BIT
Note: Jetting subs and assemblies upon request. Call 1-866-VERMEER for pricing
and availability.
TRIHAWK III BIT
125
MAXI HDD
D150x300, D200X300, D330x500
NON-MAGNETIC TOOLING DESIGNED SPECIFICALLY FOR DCI SST STEERING
Description
Part #
296309490
NON-MAG HOUSING WITH BILL 7.0" (17.8 cm)
NON-MAG SONDE HOUSING SUB ASS’Y 7.0" (17.8 cm)
296309495
296309491
BLADE MOUNT SUB-ASSEMBLY 7.0" (17.8 cm)
296309494
BLADE, 10" X 24" (25.4 cm X 61 cm)
296328261
NON-MAG TRIHAWK III BIT 4.5" (11.4 cm) IF
PULLING EYE - SWIVELS
Part #
Description
296260233
4.5" (11.4 cm) API/IF 75 TON SWIVEL
296268991
296309595
ROD RECYCLER
Part #
Description
296312681
4.5" (11.4 cm) API/IF (P)
296328300
5.5" (14 cm) API/FH (P)
CUSTOM TOOLING
SWIVEL
ROD RECYCLER
Contact your local Vermeer dealer for pricing and availability for large reaming tools
built to your specification, job, and conditions.
126
NON-MAGNETIC HOUSING
MAXI HDD
Efficiency comes in large sizes. The Vermeer line of
Navigator horizontal drills includes four trailer-mounted, maxisize drill rigs: D500x500, D750x900, D1000x900 and
D1320x900. These drill feature pullback forces of 500,000 lb
(224.1 kN) to 1,360,000 lb (6049.6 kN). The maxi drill rigs
have been designed specifically for large-diameter pipe
installations.
D500x500, D750x900, D1000x900
DRIVE CHUCK & SUB SAVER
Part #
Description
296267767
DRIVE CHUCK 6.625" (16.8 cm) API REG SUB SAVER NOT
INCLUDED
296259053
SUB SAVER 6.625" (16.8 cm) API (B) X 6.625" (16.8 cm) API (P)
296509781
D1320X900 WIRE LINE ASSEMBLY
296346399
D1320X900 SIDE ENTRY SUB 6.625" (16.8 cm) API (B) X 6.625"
(16.8 cm) IF (P)
296509764
296347883
(16.8 cm) IF (P)
296509787
296347883
(16.8 cm) IF (P)
D500X500 WIRE LINE ASSEMBLY (CALL CUTTING EDGE at
1-866-VERMEER)
D500X500 SIDE ENTRY SUB (CALL CUTTING EDGE at
1-866-VERMEER)
296346404
MAXI SUB SAVER 6.625" (16.8 cm) IF (B) X 4.5" (11.4 cm) IF (P)
296346401
MAXI SUB SAVER 6.625" (16.8 cm) IF (B) X 5.5" (14 cm) FH (P)
296346400
MAXI SUB SAVER 6.625" (16.8 cm) IF (B) X 6.625" (16.8 cm) FH (P)
Note: For drill Stem contact Vermeer Cutting Edge at 1-866-VERMEER.
Part #
Description
296281895
6.625" (16.8 cm) FH (B) X FH (P) UNIVERSAL HOUSING ASS’Y
296327262
6.625" (16.8 cm) FH TRIHAWK III BIT
296327263
TRIHAWK III TEETH
284784001
.625" (1.6 cm) X .375" (1 cm) ROLL PIN
296312526
.375" (1 cm) NPT X .3125 (.8 cm) NOZZLE
Note: Jetting subs and assemblies upon request. Call 1-866-VERMEER for pricing
and availability.
SUB SAVER
TRIHAWK III BIT
PULLING EYE - SWIVELS
Part #
Description
296331819
6.625" (16.8 cm) API REG 220 TON (199.6 METRIC TON) SWIVEL
296321437
7.625" (19.4 cm) API REG 350 TON (3175 METRIC TON) SWIVEL
296331801
7.625" (19.4 cm) API REG 500 TON (453.6 METRIC TON) SWIVEL
296331779
7.625" (19.4 cm) API REG 700 TON (635 METRIC TON) SWIVEL
Contact your local Vermeer dealer for pricing and availability for lage reaming tools
built to your specification, job and conditions.
127
128
BITS
D50X100 - D100X120 II
BACK OF
TAB
LARGE HDD
BITS
BOLT-ON, PLATE-STYLE FOR STD./DIRT HEADS — D50x100 – D80x100
Part #
Description
296255329
STD. DIRT 5" X 13.4" (13 cm X 34.0 cm) —
1.25" (3.2 cm) THICK PLATE STEEL
STD. DIRT 6" X 13.4" (15 cm X 34.0 cm) —
296255330
246743001
HARDFACED 5" X 13.38" (13 cm X 34.0 cm) —
ECONO BIT 1" (3 cm) THICK CAST STEEL
246745001
296255340
296255341
296255586
CHEVRON II 5" X 13.38" (13 cm X 34.0 cm) —
1.25" (3.2 cm) THICK CAST STEEL
235205001
SHARK 5" X 12.16" (13 cm X 30.9 cm) —
1" (3 cm) THICK CAST STEEL
235208001
SHARK 5.5" X 12.16" (14.0 cm X 30.9 cm) —
235211001
SHARK 6" X 12.16" (15 cm X 30.9 cm) —
289375001
VCT 5" X 13.375" (13 cm X 34.0 cm) —
289376001
VCT 6" X 13.375" (15 cm X 34.0 cm) —
289381001
VCP 5" X 13.375" (13 cm X 34.0 cm) —
289382001
VCP 6" X 13.375" (15 cm X 34.0 cm) —
296255716
VCTT 5" X 13.4" (13 cm X 34.0 cm) —
296255717
VCTT 6" X 13.4" (15 cm X 34.0 cm) —
STANDARD
STANDARD HARDFACED
CHEVRON II
SHARK
VCP
BOLT-ON, PLATE-STYLE FOR STD./DIRT HEADS — D80x120 / D100X120
Part #
Description
289285001
VCT 6" X 15" (15 cm x 38 cm) —
296255718
VCTT 6" X 15" (15 cm x 38 cm) —
296255719
VCTT 7" X 15" (18 cm x 38 cm) —
296260111
VCT 8" X 15" BIT
VCT
VCTT
131
LARGE HDD
BITS
BIT BOLTS — D50x100 – D80x120
Description
Part #
79943010
1" (3 cm) THICK BITS — .625" (1.6 cm) —
11 X 1" (3 cm) SOCKETHEAD
296260026
1.25" (3.2 cm) THICK BITS — .625" (1.6 cm) —
11 X 1.25" (3.2 cm) SOCKETHEAD
BIT BOLTS — D80x120
Part #
Description
85627055
.75" (1.9 cm) — 10” (25.4 cm) X 1.5" (3.8 cm) SOCKETHEAD
BIT BOLTS
BIT BOLTS
132
REAMERS
D50X100 - D1320X900
BACK OF TAB
LARGE HDD
API REAMERS, VERMEER D100X120 II DRILLS & SMALLER (or 100,000 lb pull & 15,000 ft-lb torque or less)
WING CUTTER WITH 3.5" (8.9 cm) API (REG)
Part #
Description
296259140
10" (25.4 cm)
12" (30.5 cm)
296259142
296259145
14" (35.6 cm)
296259149
16" (40.6 cm)
296259151
18" (45.7 cm)
WING CUTTER
HELICAL PLUS WITH 3.5" (8.9 cm) API (REG)
Part #
Description
296270268
14" (35.6 cm)
296270269
16" (40.6 cm)
296270270
18" (45.7 cm)
BELL WITH TEETH WITH 3.5" (8.9 cm) API (REG)
Part #
Description
296270251
10" (25.4 cm)
296270252
12" (30.5 cm)
296270253
14" (35.6 cm)
296270254
16" (40.6 cm)
296270255
18" (45.7 cm)
SPIRAL SHARK WITH 3.5" (8.9 cm) API (REG) WITH 90K SWIVEL
Part #
Description
296259123
10" (25.4 cm)
296259124
12" (30.5 cm)
296259125
14" (35.6 cm)
296259126
16" (40.6 cm)
296259127
18" (45.7 cm)
SUPER FLUTE REAMER WITH 3.5" (8.9 cm) API (REG) - THRU SPUD
Part # Description
296263707
10" (25.4 cm) SHARK
296263708
12" (30.5 cm) SHARK
296263709
14" (35.6 cm) SHARK
296263710
16" (40.6 cm) SHARK
296263711
18" (45.7 cm) SHARK
296263712
296263713
296263714
296263715
296263716
HELICAL PLUS
BELL WITH TEETH
SPIRAL SHARK
SUPER FLUTE
135
LARGE HDD
SUPER FLUTE REAMER WITH 3.5" (8.9 cm) API (REG) WITH 50K SWIVEL
Description
Part #
296263676
10" (25.4cm) SHARK
296263677
12" (30.5 cm) SHARK
296263678
14" (35.6 cm) SHARK
296263679
16" (40.7 cm) SHARK
296263680
18" (45.7 cm) SHARK
296263682
296263683
296263684
296263685
296263686
SUPER FLUTE
SUPER FLUTE REAMER WITH 3.5" (8.9 cm) API (REG) WITH 90K SWIVEL
Part #
Description
296263687
296263688
296263689
296263690
296263691
296263692
296263693
296263694
296263695
296263696
10"
12"
14"
16"
18"
10"
12"
14"
16"
18"
(25.4
(30.5
(35.6
(40.7
(45.7
(25.4
(30.5
(35.6
(40.7
(45.7
cm)
cm)
cm)
cm)
cm)
cm)
cm)
cm)
cm)
cm)
SHARK
SHARK
SHARK
SHARK
SHARK
ROTARY
ROTARY
ROTARY
ROTARY
ROTARY
T-REX REAMER WITH 3.5" (8.9 cm) API - 100K SWIVEL
Part #
Description
296320016
12” (30.5 cm)L
296320018
14" (35.6 cm)
296309286
16" (40.7 cm)
296309287
18" (45.7 cm)
296309288
20" (50.8 cm)
296309289
22" (55.9 cm)
296309290
24" (61 cm)
296309291
26" (66 cm)
296309292
28" (71.1 cm)
296309293
30" (76.2 cm)
296309294
32" (81.3 cm)
Note: All API reamers without swivels come box up (toward machine), pin down
136
SUPER FLUTE
T-REX
LARGE HDD
T-REX REAMER WITH 3.5" (8.9 cm) API - THRU SPUD
Description
Part #
296320012
12" (30.5 cm)
296320014
14" (35.6 cm)
296309269
16" (40.7 cm)
296309270
18" (45.7 cm)
296309271
20" (50.8 cm)
296309272
22" (55.9 cm)
296309273
24" (61 cm)
296309274
26" (66 cm)
296309275
28" (71.1 cm)
296309276
30" (76.2 cm)
296309277
32" (81.3 cm)
MIX MASTER WITH 3.5" (8.9 cm) API THRU SPUD
Part #
Description
296320150
8" (20.3 cm)
296320151
10" (25.4 cm)
296320152
12" (30.5 cm)
296320153
14" (35.6 cm)
296320154
16" (40.7 cm)
296320155
18" (45.7 cm)
296320156
20" (50.8 cm)
296320157
22" (55.9 cm)
296320158
24" (61 cm)
T-REX
MIX MASTER
137
LARGE HDD
VERMEER CONNECTION
Part #
Description
232713001
12" (30.5 cm)
14" (35.6 cm)
232714001
232715001
16" (40.7 cm)
Part #
Description
227726001
12" (30.5 cm)
232711001
14" (35.6 cm)
232712001
16" (40.7 cm)
BAR-CUTTER
Part #
Description
232703001
10.75" (27.3 cm)
232635001
12.75" (32.4 cm)
232637001
14.75" (37.5 cm)
232639001
16.75" (42.5 cm)
232641001
18.75" (47.6 cm)
232643001
20.75" (52.7 cm)
232645001
22.75" (57.8 cm)
232647001
24.75" (62.9 cm)
Part #
Description
232699001
10.75" (27.3 cm)
227704001
12.75" (32.4 cm)
232623001
14.75" (37.5 cm)
232625001
16.75" (42.5 cm)
232627001
18.75" (47.6 cm)
232629001
20.75" (52.7 cm)
232631001
22.75" (57.8 cm)
232633001
24.75" (62.9 cm)
SUPER HELICAL
Part #
284861001
284862001
284863001
284864001
284865001
284866001
284867001
284868001
SUPER HELICAL
Part #
284869001
284870001
284871001
284872001
284873001
284874001
284875001
284876001
138
WING-CUTTER
— 2.875" (7.3 cm) FIRESTICK #900
Description
10" (25.4 cm)
12" (30.5 cm)
14" (35.6 cm)
16" (40.7 cm)
18" (45.7 cm)
20" (50.8 cm)
22" (55.9 cm)
24" (61 cm)
— 3.5" (8.9 cm) FIRESTICK #800
Description
10" (25.4 cm)
12" (30.5 cm)
14" (35.6 cm)
16" (40.7 cm)
18" (45.7 cm)
20" (50.8 cm)
22" (55.9 cm)
24" (61 cm)
SUPER HELICAL
LARGE HDD
VERMEER CONNECTION
Part #
Description
232704001
8.5" (21.6 cm)
232706001
10.5" (26.7 cm)
12.5" (31.8 cm)
232716001
232708001
14.5" (36.8 cm)
232717001
16.5" (41.9 cm)
232718001
18.5" (47.0 cm)
232719001
20.5" (52.1 cm)
232720001
22.5" (57.2 cm)
232721001
24.5" (62.2 cm)
Part #
Description
232705001
8.5" (21.6 cm)
232707001
10.5" (26.7 cm)
227691001
12.5" (31.8 cm)
232709001
14.5" (36.8 cm)
232722001
16.5" (41.9 cm)
232723001
18.5" (47.0 cm)
232724001
20.5" (52.1 cm)
232725001
22.5" (57.2 cm)
232726001
24.5" (62.2 cm)
BELL WITH TEETH
Part #
Description
232587001
8.5" (21.6 cm)
232589001
10.5" (26.7 cm)
232591001
12.5" (31.8 cm)
232593001
14.5" (36.8 cm)
232595001
16.5" (41.9 cm)
232684001
18.5" (47.0 cm)
232685001
20.5" (52.1 cm)
Part #
Description
232575001
8.5" (21.6 cm)
232577001
10.5" (26.7 cm)
232579001
12.5" (31.8 cm)
232581001
14.5" (36.8 cm)
232583001
16.5" (41.9 cm)
232680001
18.5" (47.0 cm)
232681001
20.5" (52.1 cm)
SPIRAL/SHARK
Part #
232609001
232611001
232613001
232615001
232617001
232619001
232621001
232688001
232689001
Description
8.625" (21.9 cm)
10.75" (27.3 cm)
12.75" (32.4 cm)
14.75" (37.5 cm)
16.75" (42.5 cm)
18.75" (47.6 cm)
20.75" (52.7 cm)
24.75" (62.9 cm
30" (76 cm)
SMOOTH BELL
SPIRAL/SHARK
139
LARGE HDD
VERMEER CONNECTION
SPIRAL/SHARK
Part #
232597001
232599001
227712001
232601001
232603001
232605001
232607001
232692001
232693001
FLUTED/SHARK
Part #
235068001
235069001
235070001
235071001
235072001
235073001
235074001
242124001
235075001
242130001
242132001
235076001
242144001
242146001
242148001
242150001
242152001
FLUTED/SHARK
Part #
235077001
235078001
235079001
235080001
235081001
235082001
235083001
242125001
235084001
242131001
242133001
235085001
242145001
242147001
242149001
242151001
242153001
140
Description
8.625" (21.9 cm)
10.75" (27.3 cm)
12.75" (32.4 cm)
14.75" (37.5 cm)
16.75" (42.5 cm)
18.75" (47.6 cm)
20.75" (52.7 cm)
24.75" (62.9 cm)
30" (76 cm)
Description
8" (20.3 cm)
10" (25.4 cm)
12" (30.5 cm)
14" (35.6 cm)
16" (40.7 cm)
18" (45.7 cm)
20" (50.8 cm)
22" (55.9 cm)
24" (61 cm)
26" (66 cm)
28" (71.1 cm)
30" (76.2 cm)
32" (81.3 cm)
34" (86.7 cm)
36" (91.4 cm)
38" (96.5 cm)
40" (101.6 cm)
Description
8" (20.3 cm)
10" (25.4 cm)
12" (30.5cm)
14" (35.6 cm)
16" (40.7 cm)
18" (45.7 cm)
20" (50.8 cm)
22" (55.9 cm)
24" (61 cm)
26" (66 cm)
28" (71.1 cm)
30" (76.2 cm)
32" (81.3 cm)
34" (86.7 cm)
36" (91.4 cm)
38" (96.5 cm)
40" (101.6 cm)
SPIRAL/SHARK
FLUTED/SHARK
FLUTED/SHARK
LARGE HDD
VERMEER CONNECTION
Description
Part #
232737001
8" (20.3 cm)
232738001
10" (25.4 cm)
232710001
12" (30.5 cm)
232739001
14" (35.6 cm)
232740001
16" (40.7 cm)
232741001
18" (45.7 cm)
232742001
20" (50.8 cm)
242122001
22" (55.9 cm)
232743001
24" (61 cm)
242126001
26" (66 cm)
242128001
28" (71.1 cm)
232744001
30" (76.2 cm)
242134001
32" (81.3 cm)
242136001
34" (86.7 cm)
242138001
36" (91.4 cm)
242140001
38" (96.5 cm)
242142001
40" (101.6 cm)
Part #
Description
232728001
8" (20.3 cm)
232729001
10" (25.4 cm)
227695001
12" (30.5 cm)
232730001
14" (35.6 cm)
232731001
16" (40.7 cm)
232732001
18" (45.7 cm)
232733001
20" (50.8 cm)
242123001
22" (55.9 cm)
232734001
24" (61 cm)
242127001
26" (66 cm)
242129001
28" (71.1 cm)
232735001
30" (76.2 cm)
242135001
32" (81.3 cm)
242137001
34" (86.7 cm)
242139001
36" (91.4 cm)
242141001
38" (96.5 cm)
242143001
40" (101.6 cm)
FLUTED/ROTARY
FLUTED/ROTARY
141
LARGE HDD
VERMEER CONNECTION
FLUTED/SHARK (w/o SWIVEL) — 2.875" (7.3 cm) FST I #900 - WITH PULLING EYE
Description
Part #
284112001
8" (20.3 cm)
284113001
10" (25.4 cm)
284114001
12" (30.5 cm)
284115001
14" (35.6 cm)
284116001
16" (40.7 cm)
284117001
18" (45.7 cm)
284118001
20" (50.8 cm)
284119001
22" (55.9 cm)
284120001
24" (61 cm)
284121001
26" (66 cm)
284122001
28" (71.1 cm)
284123001
30" (76.2 cm)
284124001
32" (81.3 cm)
284125001
34" (86.7 cm)
284126001
36" (91.4 cm)
284127001
38" (96.5 cm)
284128001
40" (101.6 cm)
FLUTED/SHARK
Part #
281426001
281427001
281428001
281429001
281430001
281431001
281432001
281433001
281434001
281435001
281436001
281437001
281438001
281439001
281440001
281441001
281442001
(w/o SWIVEL) — 3.5" (8.9 cm) FST I #800 - WITH PULLING EYE
Description
8" (20.3 cm)
10" (25.4 cm)
12" (30.5 cm)
14" (35.6 cm)
16" (40.7 cm)
18" (45.7 cm)
20" (50.8 cm)
22" (55.9 cm)
24" (61 cm)
26" (66 cm)
28" (71.1 cm)
30" (76.2 cm)
32" (81.3 cm)
34" (86.7 cm)
36" (91.4 cm)
38" (96.5 cm)
40" (101.6 cm)
For information on built-in swivels or larger reamers,
CALL 1-866-VERMEER
142
FLUTED/SHARK
FLUTED/SHARK
LARGE HDD
VERMEER CONNECTION
BARREL REAMER — 3.5" (8.9 cm) API REG THRUSHAFT
Description
Part #
296341205
18" (20.3 cm)
296341206
20" (50.8 cm)
296341207
22" (55.9 cm)
296341208
24" (61 cm)
296341209
26" (66 cm)
296341210
28" (71.1 cm)
296341211
30" (76.2 cm)
296341212
32" (81.3 cm)
296341213
34" (86.7 cm)
296341214
36" (91.4 cm)
296341215
38" (96.5 cm)
296341216
40" (101.6 cm)
296341217
42" (106.7 cm)
296341218
44" (111.8 cm)
296341219
46" (116.8 cm)
296341220
48" (121.9 cm)
MAXI BARREL REAMER — 5.5" (14 cm) FULL HOLE
Part #
Description
296341221
18" (45.7cm)
296341222
20" (50.8 cm)
296341223
22" (55.9 cm)
296341224
24" (61 cm)
296341225
26" (66 cm)
296341226
28" (71.1 cm)
296341227
30" (76.2 cm)
296341228
32" (81.3 cm)
296341229
34" (86.7 cm)
296341230
36" (91.4 cm)
296341231
38" (96.5 cm
296341232
40" (101.6 cm)
296341233
42" (106.7 cm)
296341234
44" (111.8 cm)
296341235
46" (116.8 cm)
296341236
48" (121.9 cm)
296341237
50" (127 cm)
296341236
52" (132.1 cm)
BARREL REAMER
BARREL REAMER
143
LARGE HDD
VERMEER CONNECTION
FLY CUTTER — 3.5" (8.9 cm) API REG 3-SPOKE
Description
Part #
296341159
14" (35.6 cm)
296341153
16" (40.6 cm)
296341147
18" (45.7 cm)
296341141
20" (50.8 cm)
296341135
22" (55.9 cm)
296341129
24" (61 cm)
296341123
26" (66 cm)
296341117
28" (71.1 cm)
FLY CUTTER — 3.5" (8.9 cm) API REG 4-SPOKE
Part #
Description
296341066
30" (76.2 cm)
296341071
32" (81.3 cm)
296341076
34" (86.4 cm)
296341081
36" (91.4 cm)
296341086
38" (96.5 cm)
296341091
40" (101.6 cm)
296341096
42" (106.7 cm)
296341101
44" (111.8 cm)
296341106
46" (116.8 cm)
296341111
48" (121.9 cm)
FLY CUTTER
MAXI FLY CUTTER — 5.5" (14 cm) API FULL HOLE 4-SPOKE
Part #
Description
296341011
18" (45.7 cm)
296341006
20" (50.8 cm)
296341061
22" (55.9 cm)
296341056
24" (61 cm)
296341051
26" (66 cm)
296341046
28" (71.1 cm)
296341041
30" (76.2 cm)
296341036
32" (81.3 cm)
296341031
34" (86.4 cm)
296341026
36" (91.4 cm)
296341021
38" (96.5 cm)
296341016
40" (101.6 cm)
MAXI FLY CUTTER — 5.5" (14 cm) API FULL HOLE 5-SPOKE
Part #
Description
296341201
42" (106.7 cm)
296341194
44" (111.8 cm)
296341187
46" (116.8 cm)
296341180
48" (121.9 cm)
296341173
50" (127 cm)
296341166
52" (132.1 cm) FLY CUTTER 5.5 FH
144
FLY CUTTER
SWIVELS FOR
D50x100 - D100x120 II
BACK OF TAB
LARGE HDD
ACCESSORIES
SWIVELS
Part #
296258123
296258124
232510001
296260234
296268977
296260235
226649001
280494001
232508001
Description
DOUBLE-EYE 50,000 lb (22,679.6 kg) - USE 281390001 SHACKLE
DOUBLE-EYE 90,000 lb (40,823.3 kg) - USE 280473001 SHACKLE
FST I 2.875" (7.3 cm) X 50,000 lb (22,679.6 kg)USE 28139001 SHACKLE
FST I 2.875" (7.3 cm) #900 X 90,000 lb (40,823.3 kg) USE 280473001 SHACKLE
50,000 lb (22,679.6 kg) WELD ON SWIVEL USE 281390001 SHACKLE
SUB ASS’Y SWIVEL - 100,000 lb (45,359.2 kg)
100,000 lb (45,359.2 kg) SWIVEL SHACKLE STYLE
100,000 lb (45,359.2 kg) SWIVEL 3.5" (8.9 cm) API (B)
SUB ASS’Y - 50,000 lb (22,679.6 kg)
SUB ASS’Y - 90,000 lb (40,823.3 kg)
50K WELD-ON BASE ASSEMBLY
PULLING EYES
Part #
296328337
296268792
289449001
296312694
296268973
289451001
296328327
296312687
296312691
289455001
296328446
296312695
296328303
296312692
289450001
289452001
289454001
296312690
296309657
Description
50,000 lb (22,679.6 kg) X 2.625" (6.7 cm) FST #700 (B)
50,000 lb (22,679.6 kg) X 2.875" (7.3 cm) FST #900 (B)
50,000 lb (22,679.6 kg) X 2.875" (7.3 cm) API REG (B)
50,000 lb (22,679.6 kg) X 2.875" (7.3 cm) API IF (B)
50,000 lb (22,679.6 kg) X 3.5" (8.9 cm) FST #800 (B)
50,000 lb (22,679.6 kg) X 3.5" (8.9 cm) API REG (B)
90,000 lb (40,823.3 kg) X 2.875" (7.3 cm) API REG (B)
90,000 lb (40,823.3 kg) X 3.5" (8.9 cm) FST #800 (B)
90,000 lb (40,823.3 kg) X 3.5" (8.9 cm) FST #1000 (B)
90,000 lb (40,823.3 kg) X 3.5" (8.9 cm) API REG (B)
100,000 lb (45,359.2 kg) X 3.5" (8.9 cm) FST #1000 (B)
300,000 lb (136,077.7 kg) X 4.5" (11.4 cm) API IF (B)
50,000 lb (22,679.6 kg) X 2.375" (6 cm) FST #650 (P)
50,000 lb (22,679.6 kg) X 2.875" (7.3 cm) API REG (P)
50,000 lb (22,679.6 kg) X 3.5" (8.9 cm) API REG (P)
90,000 lb (40,823.3 kg) X 2.875" (7.3 cm) API REG (P)
90,000 lb (40,823.3 kg) X 3.5" (8.9 cm) API REG (P)
90,000 lb (40,823.3 kg) X 3.5" (8.9 cm) FST #1000 (P)
300,000 lb (136,077.7 kg) X 4.5" (11.4 cm) API IF (P)
280491001
226651001
280495001
232508001
DOUBLE EYE SWIVEL
FIRESTICK SWIVEL
PULLING EYES
147
148
ROCK-DRILLING
EQUIPMENT
TAB
BACK OF
TAB
ROCK-DRILLING EQUIPMENT
Tool Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152
RockFire® Rock-Drilling Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
RS Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Hunting Performance Mud Motor
. . . . . . . . . . . . . . . . . . . . . . . . . . .156
R.A.T.T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Atlas Copco BHMT Tri Cone Bits & Hole Openers . . . . . . . . . . . . . .161
151
TOOL APPLICATIONS
HOLE OPENERS
TRI CONE BITS & HOLE OPENER APPLICATION CHART
Use this chart to match your hole opener to the appropriate application.
TRI CONE BITS & HOLE OPENERS APPLICATIONS
Rock ReamerType
Mill Tooth —
Soft/Medium
TCI-CONEs —
Hard
Sandy*
1
1
Clay/Loamy* Dry/Compacted* Cobble/Broken Formation
1
3
2
1
1
1 Not Recommended
3 Fair
Soft Rock
5
2
Medium Rock Hard Rock
3
1
4
4 Good
Sandy
Clay/Loamy
Dry/Compacted
Hardpan, any dry clay, any compacted soil
Soft Rock
Sandstone, shales, soft limestone, caliche, some coral (up to around 8000 psi [552 bar])
Medium Rock
Some limestone, shale, coral between 8000 psi – 15,000 psi (552 bar – 1034 bar)
Hard Rock
Hard limestone, granite, schist; anything above 15,000 psi (1034 bar)
5
5
5 Best Choice
152
TOOL APPLICATIONS
ROCK BIT/HEAD
ROCK BIT/HEAD APPLICATION CHART
Use this chart to match your rock bit/head to the appropriate application.
ROCK BIT/HEAD APPLICATIONS
Rock ReamerType
Sandy*
Clay/Loamy* Dry/Compacted* Cobble/Broken Formation
Soft Rock
Medium Rock Hard Rock
AS4 —
with Standard Bit
1
1
1
2
4
5
5
AS4 —
with Ballistic Bit
1
1
2
3
5
4
4
AS4 —
with Chisel Bit
1
1
2
2
5
5
4
AS4 — with Narrow
Gauge Bit
1
1
3
2
4
5
5
AS4 — with Long
Nose Bit
1
1
2
4
2
1
1
RS6 — with Soft
Medium Rock Bit
1
1
1
2
4
5
5
RS6 — with Hard
Rock Bit
1
1
1
2
4
5
5
R.A.T.T.
3
3
3
5
5
5
4
MUD MOTOR
1
2
3
3
4
5
5
1 Not Recommended
3 Fair
4 Good
5 Best Choice
Sandy
Clay/Loamy
Dry/Compacted
Hardpan, any dry clay, any compacted soil
Soft Rock
Sandstone, shales, soft limestone, caliche, some coral (up to around 8000 psi [552 bar])
Medium Rock
Some limestone, shale, coral between 8000 psi – 15,000 psi (552 bar – 1034 bar)
Hard Rock
Hard limestone, granite, schist; anything above 15,000 psi (1034 bar)
153
ROCKFIRE ROCK-DRILLING SYSTEMS, AS4
RockFire — the AS4 opens up new markets for drilling contractors by virtually eliminating the mud
management that comes with mud motor jobs. No reclaimers, no big mess — a real advantage in urban areas.
ROCKFIRE AS4 SPECIFICATIONS
MACHINE ADAPTABILITY: D24x33, D24x40A, D24x40 Series II, D33x44,
D40x40, D36x50, D36x50 Series II
AIR REQUIREMENTS: Air Compressor - Minimum 400 cfm, 200 psi (13.8
bar) [Max. pressure - 250 psi (17.2 bar)]
CUTTING BIT DIAMETER: 4” (10.2 cm)
RECOMMENDED FOAM TYPE: Baroid Quick Foam or Baroid Attack Foam
RECOMMENDED POLYMER TYPE: Baroid EZ MUD Liquid Polymer
MIX RATES: [per 300 gal (1135.6 L)] Solda Ash (to achieve pH of 8.5 - 9.5),
2 gal (7.6 L) Quck Foam or Attack Foam, 2 Qt. EZ MUD
TOOLING CONNECTION: Splinelok
TRANSMITTER: DCI™, Spot D tek, Radiodetection
MALLET LENGTH: 66” (167.6 cm), (Incl. bit and transmitter housing)
*Available with 2 Bent Sub and Center Cut Bit
SYSTEM REQUIREMENTS
Minimum 400 cfm Air Compressor at 200-250 psi.
ROCKFIRE Ready Navigator HDD
ROCKFIRE AS4 down hole mallet for apropriate sized drill stem (includes transmitter
housing, pneumatic mallet, 2 steerable bits and one set of transmitter isolators)
AS4 ASSEMBLY
ROCKFIRE Compatible Tank Assembly
D24x33 – D40x40
Part #
AS4004
296257954
296257953
296257977
296257955
296260169
296257882
(AS4)
Description
4" (10.2 cm) ROCKFIRE AS4 ASSEMBLY
BIT KIT GENERAL
BIT KIT BALLISTIC
BIT KIT LONG NOSE BIT
BIT KIT NARROW GAUGE
AS4 SERVICE KIT
BIT KIT CHISEL
154
AS4 GENERAL BIT
AS4 BALLISTIC BIT
AS4 LONG NOSE BIT
AS4 NARROW BIT
AS4 CHISEL BIT
RS7
RS7 — this system is simple and convenient. It is operated under low pressure for less chance of
hydrofracture and increased drilling fluid savings.
ROCKFIRE RS7 SPECIFICATIONS
MACHINE COMPATABILITY: D24x33, D24x40(A), D24x40 SERIES II,
D33x44, D40x40, D36x50, D36x50 SERIES II, D50x100, D80x100 SERIES II
CUTTING BIT DIAMETER: 7” (17.8 cm)
LENGTH: 62” (157.5cm)
MUD FLOW REQUIREMENTS: 8 gal (30.3 L) minimum 12 gal (45.4 L)
maximum
BIT SELECTION
Soft-Medium Formation Bit (IADC 537): 5000-15000 psi (344.7-1034.2 bar)
Hard Formation Bit (IADC 737): 15000 + psi
RS7 ROCK SYSTEM
Part #
Description
RS7001
7" (15 cm) DRILL HEAD ASSEMBLY WITH 3.50” SPLK II (B)
296259030
7" (15 cm) TRI-CONE BIT SOFT/MEDIUM
FORMATION — IADC # 537
296259031
7" (15 cm) TRI-CONE BIT HARD FORMATION —
IADC # 737
RS7 ASSEMBLY
SOFT/MEDIUM BIT
HARD BIT
155
MUD MOTORS
MUD MOTOR
The Vermeer/Hunting Performance Mud Motor offers the contractor a distinct advantage and total solution in rock drilling
compared to other Mud Motors on the market today. Featuring the exclusive and patented Survey While Boring (SWB)
technology, this motor features the sonde placed within three feet of the bit to accurately understand the location of the
bit compared to other manufacturers whose sonde location is up to 18' (5.5 m) away from the bit. Thus, it leaves out the
guesswork of understanding at all times the location of the bit in the bore path. Other features include a specially
designed motor section that creates a positive displacement which translates to a 1 to 1 ratio of gallons per minute flow
to RPM’s and minimizes flow and maximizes torque at the bit. A specially designed sealing system allows the use of
larger thrust bearings creating the ability to run greater thrust pressures, which increases performance and service life.
Available for sale or rental options. Contact your Vermeer Dealer for details.
156
MUD MOTORS
157
MUD MOTORS
2.875” (7.3 cm) MONGOOSE WITH 2-DEGREE BENT SUB
Machine Adaptability 24x40 Series II, 33x44, 36x50, D36x50 II, 40x40
Operating torque - 400 ft-lb (542 Nm)
Stall torque - 600 ft-lb (813 Nm)
Power section diameter/OD - 2.875” (7.3 cm)
Bit Sub Thread - 2.375” (6 cm) API REG
Bit diameter minimum - 3.5" (8.9 cm)
Bit diameter maximum - 4.75" (12.1 cm)
Minimum rotation speed - 65 RPM
Maximum rotation speed - 390 RPM
Minimum flow - 20 GPM (1.26 L/s)
Maximum flow - 115 GPM (7.26 L/s)
Rear (Up) Threads – 2.375” (6 cm) PAC (B)
Front (Down) Threads – 2.375” (6 cm)API REG (B)
OA Length - 10’ (3 m)
Weight - 150 lb (68 kg)
5.75” (14.6 cm) (SWB)
Machine Adaptability – 50x100 through 100x120 Series II
Operating Torque - 1800 ft-lb (2441 Nm)
Stall Torque - 2600 ft-lb (3525 Nm)
Power Section Diameter/ID - 4.75” (12.1 cm)
Bit Sub Threads 3.5” (8.9 cm) API REG
Bit Diameter Minimum - 6.75” (17.2 cm)
Bit Diameter Maximum - 7.875” (20.0 cm)
Minimum Rotation Speed - 40 RPM
Maximum Rotation Speed - 170 RPM
Rear (Up) Threads – 3.5” (8.9 cm) FST I (B)
Front (Down) Threads – 3.5” (8.9 cm) API REG (B)
OA Length - 17.5’ (5.34 m)
Weight - 1175 lb (533 kg)
6.75” SWB
Machine Adaptability - 150x300 through 300x500
Operating torque - 4500 ft-lb (6101 Nm)
Stall torque - 6750 ft-lb (9152 Nm)
Power section diameter/OD - 6.75” (17.2 cm)
Bit Sub Threads - 4.5” (11.4 cm) API REG
Bit diameter minimum - 7.875" (20.0 cm)
Bit diameter maximum - 9.875" (25.1 cm)
Minimum rotation speed - 80 RPM
Maximum rotation speed - 170 RPM
Rear (Up) Threads – 4.5” (11.4 cm) API X-HOLE (B)
Front (Down) Threads – 4.5” (11.4 cm) API REG (B)
OA Length – 20.16’ 6 m)
Weight – 2800 lb (1270 kg)
TRICONE BITS
Vermeer offers quality Tri Cone Bits for mud motor and other
HDD applications. All new components - Not Reruns!
Contact your Vermeer Dealer for details.
158
R.A.T.T. TOOL
159
R.A.T.T. TOOL
R.A.T.T. ROCK SYSTEM
Part #
Description
RATT001
RATT002
5” (12.7 cm) ROCK ADAPTABLE TERRAIN TOOL WITH 3.5” (8.9 cm)
SPL II (B)
5” (12.7 cm) ROCK ADAPTABLE TERRAIN TOOL WITH 2.125” (5.4 cm)
HEX (P)
CONTACT 1-866-VERMEER FOR TRICONE BIT OPTIONS
160
ROCK-DRILLING ACCESORIES
NON-MAGNETIC HOUSING AND ATLAS COPCO BHMT TRICONE PILOT BORE BITS
PILOT BORE BITS
Size
4.75” (12.1 cm) - 5.25” (13.3 cm)
5.5” (14 cm) - 6.75” (14.1 cm)
7.875” (20 cm)
8.75” (22.2 cm)
9.875” (25.1 cm)
10.625” (27 cm)
12.25” (31.1 cm)
17.5” (44.5 cm)
Style
Steel, milled tooth bit TCI Bit
Mill Tooth Bit
TCI Bit
CONTACT THE CUTTING EDGE DEPARTMENT FOR PRICING AND AVAILABILITY: 1-866-VERMEER
161
ROCK-DRILLING ACCESORIES
ATLAS COPCO, BHMT TRICONE PILOT BORE BITS
RANDOM ORBITAL SPLIT BIT REAMERS - REBUILDABLE REAMERS
RANDOM ORBITAL SPLIT BIT REAMERS
Reamer diameter
No. of Cutter size Lead Connection
Cutters
Tail connection
Shaft OD
3 1/8”/79 mm
Make up Torque
8"/ 203 mm
5
5 1/4
2 3/8 REG(B)
2 3/8 REG(P)
10"/254 mm
5
6 3/4
2 7/8 IF(B)
2 7/8 IF(P)
4 1/4”/108 mm 4500-5500 ft-lb
12 1/4”/311mm
5
9
2 7/8 IF(B)
2 7/8 IF(P)
4 1/4”/108 mm 4500-5500 ft-lb
14”/356 mm
5
9
2 7/8 IF(B)
2 7/8 IF(P)
4 1/4”/108 mm 4500-5500 ft-lb
16”/406 mm
4
12 1/4
2 7/8 IF(B)
2 7/8 IF(P)
4 3/8” 111 mm 4500-5500 ft-lb
18”/457 mm
5
12 1/4
4 1/2 IF(B)
4 1/2 IF(P)
6 1/4”/159 mm 12000-17000 ft-lb
20”/559 mm
5
12 1/4
4 1/2 IF(B)
4 1/2 IF(P)
6 1/4”/159 mm 12000-17000 ft-lb
22”/559 mm
5
12 1/4
4 1/2 IF(B)
4 1/2 IF(P)
6 1/4”/159 mm 12000-17000 ft-lb
24”/610 mm
5
12 1/4
4 1/2 IF(B)
4 1/2 IF(P)
6 1/4”/159 mm 12000-17000 ft-lb
26”/660 mm
4
17 1/2
6 5/8 REG(B)
6 5/8 REG(P)
8”/203 mm
28000-38000 ft-lb
28”/711mm
5
17 1/2
6 5/8 REG(B)
6 5/8 REG(P)
8”/203 mm
28000-38000 ft-lb
30”/762 mm
5
17 1/2
6 5/8 REG(B)
6 5/8 REG(P)
8”/203 mm
28000-38000 ft-lb
32”/813 mm
5
17 1/2
6 5/8 REG(B)
6 5/8 REG(P)
8”/203 mm
28000-38000 ft-lb
TCI Hole Opener
162
1560-2500 ft-lb
HDD PULLER, VISE JAWS, &
ACCESSORIES TAB
BACK OF
TAB
HDD PULLER, VISE JAWS,
& ACCESSORIES
Decal Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166
HDD Pullers & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167
Drill Stem Maintenance Kit and Thread Compound . . . . . . . . . . . . .170
Vise Jaws, Vice Jaw Inserts, & Wipers . . . . . . . . . . . . . . . . . . . . . . . .171
Electronics and Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172
ACS Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175
Boots, Hard Hats, Work Zone Cones, Safety Glasses . . . . . . . . . . .176
165
HDD ACCESSORIES
WORK ZONE CONE
166
HDD ACCESSORIES
SHACKLES, PULL GRIPS, CARROT-TYPE PULLERS, MULTI-DUCT PULLERS
SHACKLES
Part #
3028001
1452003
1452001
281383001
281391001
281390001
280473001
Description
.25" (.64 cm) PIN 1000 lb (454 kg)
.31" (.79 cm) PIN 1500 lb (680 kg)
.63" (1.6 cm) PIN 4000 lb (1814 kg)
1" (3 cm) PIN 13,000 lb (5800 kg)
1.38" (3.5 cm) PIN 24,000 lb (10,886 kg)
2" (5 cm) PIN 50,000 lb (22,680 kg)
2" (5 cm) PIN 80,000 lb (32,288 kg)
SHACKLE
PULL GRIPS
Part #
204965001
204966001
204967001
204968001
204969001
223750001
296278316
Description
.75" – 1.25" (1.9 cm – 3.2 cm)
1.25" – 2" (3.2 cm – 5 cm)
2" – 2.75" (5 cm – 7.0 cm)
2.75" – 3.5" (7.0 cm – 8.9 cm)
3.5" – 4.25" (8.9 cm – 10.8 cm)
4.25" – 4.875" (10.8 cm–12.4 cm)
.75" - 1.25 (1.9 cm - 3.2 cm) TRIPLE WIRE
CARROT-TYPE PULLERS
Part #
Description
231802001
.5" – 1" (1.3 cm – 3 cm) — SHARP THREAD
289295001
1" – 1.25" (3 cm – 3.2 cm) — SHARP THREAD
296255533
1.25" (3.2 cm) — SHARP THREAD
231805001
1.25" – 1.5" (3.2 cm – 3.8 cm) — SHARP THREAD
296255297
1” (3 cm) — SHARP THREAD
296255298
1.5" (3.8 cm) — SHARP THREAD
231807001
2" (5 cm) — SHARP THREAD
PULL GRIPS
CARROT PULLERS
167
HDD ACCESSORIES
EXPANDING TAPER PULLERS, SLEEVED TAPER PULLERS, PULLBACK SONDE HOUSINGS
EXPANDING TAPER PULLERS
Part #
Description (SDR Range)
251790001
1" (3 cm)
(10 - 15)
231907001
1.25" (3.2 cm) (7 - 21)
248939001
1.5" (3.8 cm) (10 - 22)
231908001
2" (5 cm) (11 - 25)
248947001
2.5" (6.3 cm) (10 - 18)
131506001
3" (8 cm) (11 - 16)
131507001
4" (10 cm) (10 - 24)
296253242
4.33” (11 cm) (10 - 24)
280633001
5" (13 cm) (10 - 28)
131508001
6" (15 cm) (10 - 28)
296253246
6.3” (16 cm) (10 - 28)
296260207
7.8" (20 cm)
238811001
8" (20 cm) (16 - 21)
238812001
10" (25 cm) (11 - 27)
238813001
12" (30 cm) (11 - 34)
SLEEVED TAPER
Part #
289466001
289467001
289468001
289469001
289470001
296255564
296255565
296255566
168
PULLERS
Description (SDR Range)
1" (3 cm) (10 - 15)
1.25" (3.2 cm) (7 - 21)
1.5" (3.8 cm) (10 - 22)
2" (5 cm) (11 - 25)
2.5" (6.3 cm) (10 - 18)
3" (8 cm) (11 - 16)
4" (10 cm) (10 - 24)
6" (15 cm) (10 - 28)
Pipe ID Min/Max
1.05” (2.7 cm)- 1.14” (2.9 cm)
1.204” (3.1 cm) - 1.5” (3.8 cm)
1.53” (3.9 cm) - 1.73” (4.4 cm)
1.942” (4.9 cm) - 2.182” (5.5 cm)
2.31” (5.9 cm) - 2.56” (6.5 cm)
2.86” (7.3 cm) - 3.06” (7.8 cm)
3.62” (9.2 cm) - 4.12” (10.5 cm)
4.45” (11.3 cm) - 5.16” (13.1 cm)
5.32” (13.5 cm) - 6.16” (15.7 cm)
6.22” (15.8
7.05” (17.9
8.77” (22.3
10.43” (26.5
cm)
cm)
cm)
cm)
-
7.45” (18.9
7.82” (19.9
10.0” (25.4
12.0” (30.5
EXPANDING TAPER PULLER
cm)
cm)
cm)
cm)
Pipe ID Min/Max
1.05” (2.7 cm)- 1.14” (2.9 cm)
1.204” (3.1 cm) - 1.5” (3.8 cm)
1.53” (3.9 cm) - 1.73” (4.4 cm)
1.942” (4.9 cm) - 2.182” (5.5 cm)
2.31” (5.9 cm) - 2.56” (6.5 cm)
2.86” (7.3 cm) - 3.06” (7.8 cm)
3.62” (9.2 cm) - 4.12” (10.5 cm)
5.32” (13.5 cm) - 6.16” (15.7 cm)
SLEEVED TAPER PULLER
HDD ACCESSORIES
API PULLING EYES & SPLINELOK ROLL PINS
SPLINELOK I & II ROLL PINS
Description
Part #
280416001
.5" (1.3 cm) X 1.25" (3.2 cm) LID PIN
284004001
.5" (1.3 cm) X 1.25" (3.2 cm) LID PIN; SET OF 24
251817001
.5" (1.3 cm) X 2.125" (5.4 cm)
284000001
.5" (1.3 cm) X 2.125" (5.4 cm); SET OF 24
284985001
.5" (1.3 cm) X 2" (5 cm); SET OF 8
251823001
.5" (1.3 cm) X 2.5" (6.4 cm)
284001001
.5" (1.3 cm) X 2.5" (6.4 cm); SET OF 24
296257842
.5" (1.3 cm) X 2.5" (6.4 cm); SET OF 8
289394001
.5" (1.3 cm) X 3.5" (8.9 cm); SET OF 8
280424001
.63" (1.6 cm) X 2" (5 cm)
284005001
.63" (1.6 cm) X 2" (5 cm); SET OF 24
251883001
.63" (1.6 cm) X 2.5" (6.4 cm)
281463001
.63" (1.6 cm) X 2.5" (6.4 cm); SET OF 24
251976001
.63" (1.6 cm) X 3" (8 cm)
284002001
.63" (1.6 cm) X 3" (8 cm); SET OF 24
284784001
.63" (1.6 cm) X 3.38" (8.6 cm) - D150X300 TRIHAWK III BIT
284003001
.63” (1.6 cm) X 3.38" (8.6 cm); SET OF 24
- D150X300 TRIHAWK III BIT
SPLINELOK I & II SOLID PINS
Part #
Description
289254001
.625" (1.6 cm) X 2.38" (6 cm); TRIHAWK SOLID LID
296255530
.69" (1.8 cm) X 3.25" (8.3 cm); SPLK II SOLID;
SET OF 8
SPLINELOK ROLL PINS
TRIHAWK LID SOLID PINS
SPLINELOK SOLID PINS
169
HDD ACCESSORIES
DRILL STEM MAINTENANCE KIT AND THREAD COMPOUND
DRILL STEM MAINTENANCE KIT
Description
Part #
249091001
MAINTENANCE KIT
DRILL STEM THREAD COMPOUND
Part #
Description
296337339
VERMEER BIO-STICK; 1 gal (3.8 L)
296337340
296337341
296337372
VERMEER BIO-STICK CARTRIDGES (CASE OF 30)
235983001
VERMEER DRILL STEM COMPOUND; 1 gal. (3.8 L)
SUMMER (KOPPER KOTE)
905508003
VERMEER DRILL STEM COMPOUND; 2 gal (7.6 L)
905508005
235983002
WINTER (ZINC BASE)
235983001
VERMEER DRILL STEM COMPOUND; 2 gal 7.6 L)
WINTER (ZINC BASE)
235983006
WINTER (ZINC BASE)
296264990
TAPERED BRUSH
296264991
BEVELED BRUSH
296274856
LONG HANDLE BRUSH
296274031
THREAD COMPOUND REFILL CARTRIDGE (THREE 10 PACKS)
SUMMER
249159982
THREAD COMPOUND REFILL CARTRIDGE (THREE 10
PACKS) WINTER
296266194
WRL CHAIN LUBE; AEROSOL
296266195
CLEAN-UP DEGREASER; AEROSOL
296266196
KOPR-KOTE AEROSOL; HI-TEMP ANTI-SEIZE
296266197
550 AEROSOL — ANTI-SEIZE
296266198
KOPR-KOTE 1/2 lb. (.2 kg) BT; HI-TEMP ANTI-SEIZE
296266199
550 1/2 lb. (.2 kg) BT; ANTI-SEIZE
296266200
TL-42 REMOVABLE (BLUE); 50 ml JET-LOCK
296266201
TL-42 REMOVABLE (BLUE); 250 ml JET-LOCK
296266202
TL-71 PERMANENT (RED); 50 ml JET-LOCK
296266203
TL-71 PERMANENT (RED); 250 ml JET-LOCK
296266204
TL-90 WICKING ADHESIVE (GREEN); 50 ml
296266205
TL-90 WICKING ADHESIVE (GREEN); 250 ml
296266206
PS-92 PIPE SEALANT WITH PTFE (WHITE); 50 ml
296266207
PS-92 PIPE SEALANT WITH PTFE (WHITE); 250 ml
296266208
HP-45 HYDRAULIC & PNEUMATIC SEALANT
(PURPLE); 50 ml
296266209
TOP GUN WASP & HORNET KILLER
SAND CONTENT TEST KIT
Part #
Description
251930001
SAND CONTENT TEST KIT
170
STEM MAINTENANCE KIT
BIO-STICK
THREAD LINE
HDD ACCESSORIES
VISE JAWS, VICE JAW INSERTS AND WIPERS
VISE JAWS
Part #
296271432
289147001
289148001
236090001
236076001
236076001
236090001
275214001
236112001
236111001
230831001
281591001
276415001
296310768
249879001
249880001
296252194
296310768
278121001
VISE JAWS WITH
Part #
285750001
285753001
285754001
Description
D6x6 JAW - VISE
D7x11A QS JAW - 1.66” (4.2 cm) STEM SIDE
D7x11A QS JAW - 1.66” (4.2 cm) VISE SIDE
D7x11A, D7x11 SERIES II; CYLINDER SIDE — 1.66" (4.2 cm)
D7x11A, D7x11 SERIES II; STATIONARY SIDE — 1.66" (4.2 cm)
D10x14, D10x15; STATIONARY SIDE — 1.66" (4.2 cm)
D10x14, D10x15; CYLINDER SIDE/REAR VISE — 1.66" (4.2 cm)
D10x14, D10x15; CYLINDER SIDE/FRONT VISE — 1.66" (4.2 cm)
D10x15 -D20x22; CYLINDER SIDE — 1.90" (7.8 cm)
D10x15 -D20x22; STATIONARY SIDE — 1.90" (7.8 cm)
D24x26, D24x40A, D24x40 SERIES II; 2.625" (4.2 cm)
D24x33 JAW - VISE
D36x50 SERIES II - 2.75" (7 cm) OD FOR 2.375" (6 cm) AND
2.625" (6.7 cm) FSII AND FSI #650
D36x50 SERIES II - 3.10" (7.9 cm) OD FOR 2.625" (6.7 cm) FSI #700
D50x100A, D80x100; 2.875" (7.3 cm)
D50x100A, D80x100; 3.5" (8.9 cm)
D150x300 - D300x500; 4.5” (11.43 cm)
VISE JAWS
INSERTS
Description
D40x40; 2.625" (4.2 cm)
D50x100A, D55x100, D80x100; 2.875" (7.3 cm)
D50x100A, D55x100, D80x100, D80x120; 3.5" (8.9 cm)
VISE JAWS INSERTS
Part #
Description
278223001
D40x40; 2.625" (4.2 cm)
222488001
D50x100A, D55x100, D80x100, D80x100 II; 2.875" (7.3 cm)*
278121001
D50x100A - D100x120 II; 3.5" (8.9 cm)*
296303218
D100x120 SERIES II DIAMOND PATTERN
VISE JAW INSERT
*For machines with non-floating vise, use #287045001.
ROD WIPERS
Part #
235920001
235921001
235922001
235923001
235924001
296274193
235925001
235926001
296265334
296346128
Description
D7x11A, D7x11A QS; 1.32" (3.4 cm)
D6x6 - D10x15; 1.66" (4.2 cm)
D16x20 - D20x22; 1.90" (7.8 cm)
D18x22 - D24x33; 2.06" (5.2 cm)
D24x40 - D40x40; 2.375" (6 cm)
2.625” (6.7 cm) FST II
D50x100, D50x100A, D55x100, D80x100, D80x100 SERIES II;
2.875" (7.3 cm)
D50x100 - D100x120 II; 3.5" (8.9 cm)
D150x300 - D300x500
D20X22FX SERIES II; 2.06" (5.2 cm)
ROD WIPERS
171
HDD ACCESSORIES
ELECTRONICS AND SOFTWARE
By working closely with the worldʼs premier locating companies, Vermeer helps keep you on the leading edge of
technology by offering a range of locators designed to meet the needs of varying applications.
VERMEER ECLIPSE LOCATOR
Part #
Description
296252715
Eclipse locator system with remote
296252716
Eclipse receiver
296252717
Eclipse remote display
286880001
Eclipse 50' (15.2 m) standard-range transmitter with 0.1% pitch
296252718
Eclipse cable transmitter -19.05” (48.4 cm) OA Length
296252719
Eclipse power supply
296270133
Eclipse extended-range transmitter
2962870128
Eclipse short range sensitive pitch transmitter
VERMEER MARK III LOCATOR
Part #
Description
296252698
Mark III system with remote display
296252697
Mark III system with remote capability
296252699
Mark III system with cable capability
296252701
Mark III receiver with remote capability
296252702
Mark III remote display
296252740
Mark III remote display for cable transmitter
231991001
Mark III Ductrak receiver
VERMEER ECLIPSE
VERMEER MARK III
VERMEER MARK V LOCATOR
Part #
Description
296252708
Mark V system with remote display
296252707
Mark V system standard system w/o remote display
296252709
Mark V system with remote display and Datalog system
296252710
Mark V remote receiver
296252711
Mark V remote display
296270178
Mark V system with cable capability
296270179
Mark V cable remote display
VERMEER MARK III & V ACCESSORIES
Part #
Description
296252898
Mark V dual-frequency transmitter
213389005
40' (12.2 m) standard-range transmitter (yellow)
221643001
70' (21.3 m) long-range transmitter (red)
226196001
70' (21.3 m) long-range transmitter with extended life (red)
226197001
70' (21.3) long-range transmitter with .1% pitch (magenta)
226198001
70' (21.3 m) long-range transmitter with .1% pitch &
extended life (magenta)
226199001
100' (30.5 m) cable transmitter (green)
226200001
100' (30.5 m) cable transmitter with .1% pitch (magenta)
231224001
Datalog module
231228001
Datalog PC interface
226195001
Mark series cable transmitter power supply
278742001
Supercell (lithium battery)
213389009
Nicad battery packs
213389007
Battery charger, 115 volt/230 volt
296270180
Mark V dual frequency cable transmitter
296270181
Ductrak transmitter
296270182
Eclipse dual frequency transmitter
172
VERMEER MARK V
HDD ACCESSORIES
VERMEER LT LOCATOR
Description
Part #
296281828
LT System
296281829
LS Transmitter - 8.0” (20.3 cm) OA Length
for use with Vermeer Mini-Heads
DCI SPOT-D-TEK
Part #
278729001
278731001
278732001
IV LOCATOR
Description
Spot-D-Tek IV with Mole Map IV package
Spot-D-Tek IV receiver
Mole Map IV with case & mounting bracket
DCI SPOT-D-TEK
Part #
278734001
278735001
296252786
296250376
296250377
296250378
278580001
278581001
296250276
296250279
IV ACCESSORIES
Description
38 kHz 45' (13.7 m) standard-range probe
38 kHz 80' (24.4 m) extended-range probe
9.5 kHz probe
38 kHz standard-range no sleep probe
38kHz extended-range no sleep probe
9.5 kHz no sleep probe
Lithium battery
Battery cap (for use with lithium battery)
Utility transmitter cable & ground stake
Fiber-blowing, Mole-tracking sewer sonde
DCI SPOT LITE LOCATOR
Part #
Description
296250268
Spot Lite locator with 16' (4.9 m) remote
296250269
Spot Lite locator w/o remote
296250270
16'+ (4.9 m+) mini directional probe
296250271
Spot Lite remote monitor
SPOT-D-TEK IV
173
HDD ACCESSORIES
Vermeer ATLAS BORE PLANNER software heightens professionalism by aiding the
operator in selection of the most efficient bore path. It reduces machine wear and
tear, and allows the operator to compare the planned bore path versus the actual
bore path. Use with laptop, desktop or handheld computers.
BORE-PLANNING TOOLS
Part #
Description
ABP3CD
ATLAS BORE PLANNER 3.0
ABP3PROCD
ATLAS BORE PLANNER 3.0 Pro
PABP100
Pocket ATLAS BORE PLANNER* with FieldCalc*
BPT100
Pocket ATLAS BORE PLANNER* with FieldCalc* and
ATLAS BORE PLANNER
BPT110
Pocket ATLAS BORE PLANNER* with FieldCalc* and
ATLAS BORE PLANNER Pro
FC102
FieldCalc*
FCPC100
FieldCalc Software on CD for PC Computer
TMAP100
Terrain-mapping* laser with 1-4 scope
Ipaq 130
Ipaq 3975: 64 KB color, 64 MB RAM, 48 MB ROM, 400 mhz
processor, blue chip capability expansion pack, case, auto adapter
Ipaq 110
Ipaq 3850: 64 KB color, 64 RAM, 32 ROM,
expansion pack, case, auto adapter
*Note: an Ipaq is required with Pocket ATLAS BORE PLANNER, FieldCalc and
terrain-mapping programs. Ipaq computers may not be purchased without software.
UNDERGROUND ANALYSIS SOFTWARE
Underground Analysis is an interactive program that uses your input on a variety of
factors to calculate a comparison between HDD and open-cut operations.
PN 296306559
BORE PILOT SOFTWARE
Bore Pilot™ software is an educational tool that takes an in-depth look at HDD from
basics to post-construction, helping you make informed decisions.
PN 296296963
Underground Analysis Software and Bore Pilot Software
Packaged: PN 296306560
174
The pocket Atlas Bore Planner®
delivers bore planning technology
where it’s needed most: out in the
field. This handheld version has
many of the same features of the
original Atlas Bore Planner, and
enhances user mobility as well.
HDD ACCESSORIES
ACS PRODUCTS
HDD REMOTE LOCKOUT SYSTEM*
Description
Part #
IK-01-995
Remote lockout kit for
IK-02-995
IK-03-995
S/N# below 1900
IK-04-995
IK-05-995
IK-01-996
IK-02-996
IK-03-996
IK-04-996
IK-05-996
D7x11, D7X11a
D16X20A and D10x15
D24x26 and D24x20A with
D24X40A with S/N# 1900 and above
D50x100, D80x100, D40x40
D24x33
D33x44 with 10' (3.0 m) stem
D33x44 with 15' (4.6 m) stem
D55x100
D80x120
REMOTE LOCKOUT SYSTEM
*The Remote Lockout System is a two-way communication and control tool
that allows workers to lock out the drill anywhere along the bore path or at the
exit site. Designed to prevent injury from unexpected drill string operation, an
operator utilizes the system prior to entering the exit pit, working on or near the
drill string, changing tooling, attaching product or manually adding/removing
drill stem.
175
HDD ACCESSORIES
OTHER ITEMS
PULLOVER DIELECTRIC LINEMEN'S BOOTS
Description
Part #
210780009
PULLOVER BOOTS — SIZE
210780001
210780003
210780005
210780007
210780011
210780013
210780015
9
10
11
12
13
14
15
16
FOUR BUCKLE DIELECTRIC LINEMEN'S BOOTS
Part #
Description
279118001
FOUR BUCKLE BOOTS — SIZE
279118002
279118003
279118004
279118005
279118006
279118007
279118008
ANKLE RUBBER
Part #
279119001
279119002
279119003
279119004
279119005
279119006
279119007
279119008
HARD HATS
Part #
145629001
PULLOVER BOOTS
9
10
11
12
13
14
15
16
DIELECTRIC LINEMEN'S BOOTS
Description
ANKLE RUBBER BOOTS — SIZE 9
FOUR BUCKLE BOOTS
ANKLE RUBBER BOOTS
Description
WHITE HARD HAT
WORK ZONE CONE
WORK ZONE CONES
Part #
Description
904541001
WORK ZONE CONE (ORANGE PVC)
HARD HAT
SAFETY GLASSES
Part #
Description
145627003
BOAS — CLEAR FRAME, CLEAR LENS
145627005
BOAS — SMOKE FRAME, MIRROR LENS
176
SAFETY GLASSES
GLOSSARY
TAB
BACK OF
TAB
GLOSSARY
API: (American Petroleum Institute) used to designate the type of tapered thread used on many tools.
AS4: air system — 4" (10.2 cm)
(B): box or female side of joint or thread
Bar cutter: very aggressive open- or cutter-style reamer with large, carbide-coated cutters and straight paddles.
Offers great mixing action; best in hardpans and chalky, dry-compacted soils. Not recommended for use in sticky
clays, rock or rocky conditions.
Bell reamer with teeth: a packer-style reamer with replaceable rotary carbide teeth. Is a bell shape to push cuttings
and fluid to the outer bore wall. Works in most soils; is best in small cobble, 3" (7.6 cm) and under.
cm: centimeter
Carrot puller: is a tapered pulling eye with a “thread” that grips the inside of the product. Attaches to the swivel
via a shackle.
Chevron II bit: features two chevron-shaped tips with carbide edges that provide better performance in soft shales,
hardpan and caliche.
Clevis/Eye swivel: this swivel has a double eye plate or “yoke” that attaches to a reamer on one end and a single
eye plate that attaches to product on the other.
Crossover adapter subs: used to cross over between two different thread styles or joint connection styles.
Cutter/Mixer-type reamer: open-type reamers, including the Vermeer wing cutter, bar cutter, helical, super helical,
helical plus and Mix Master.
Double clevis swivel: this swivel has a double eye plate or “yoke” (clevis) on both ends.
Double eye swivel: this swivel has a “yoke” (clevis) on one end and a single eye plate on the other end.
Drill bit: attaches to the drill head; is the component that cuts through the ground. It is also responsible for steering
the head and mixing drilling fluid during the pilot bore.
Drill head: the piece that attaches at the front of the drill string; houses the transmitter. The bit mounts on the head.
Drill stem maintenance kit: this kit has everything you need to clean up your stem for inspection. A triangular file is
included for minor dressing of the pin end to repair small nicks or imperfections.
Drill stem: a length of tubular steel that is fed into the bore hole. Stems are built with threaded ends that allow
multiple stems to be connected. Stems are added as drilling distance increases. The stem is also used to introduce
drilling fluid to the bore hole through its hollow center. Vermeer uses one-piece forged drill stem for greater integrity.
Vermeer offers Firestick drill stem.
Drive chuck: one end of this component attaches to the output shaft of the rotation gearbox; the other end attaches
to the drill stem.
Econo bit: is a tough and economical, heat-treated, cast steel bit with carbide hardfacing along its edges for long
life in abrasive conditions. Not recommended for use in hardpans or rocky conditions.
End load/End load heads: end load refers to a method of inserting or removing a transmitter. An end load head
is two or three pieces, and you must break either the front or rear section apart from the housing to access the
transmitter. The Vermeer mini-head and end load head fall into this category.
179
GLOSSARY
End load head: the end load head is designed for use with wireline and extended-life (four battery) transmitters. The
head has three pieces that thread together: the front bit mount sub, the transmitter housing and the rear
connection sub. The transmitter is accessed by unthreading the rear connection sub and inserting or removing it
from the transmitter housing.
Expanding taper and sleeved taper-puller: product is slid over the jaws and then the jaws are expanded by
twisting the pulling eye. This pushes the jaws outward and they “bite” into the product from the inside. A sleeved
puller works the same way, but an outer sleeve protects the product and grips it from outside as well as the inside.
Firestick: the type of thread used on original version Navigator drill stem. It’s a tapered, double-shouldered, torqueup-type thread.
Fluted reamer: flutes help to “pump” slurry past the reamer; features your choice of shark or rotary teeth, with or
without built-in swivel. Good universal reamer. Not intended for use in solid rock.
Full Hole: type of API thread
Hardface bit: features tough, heat treated plate steel bit with carbide hardfacing along its edges. 1" (25.4 mm) thick
for D16x20 – D40x40; 1.25" (31.8 mm) thick for D50x100 – D100x120; available with optional center pullback hole.
HDPE: high-density polyethylene
Helical plus reamer: is a helix of bars loaded with carbide shark teeth. Is an aggressive, low-torque, open/cutterstyle reamer. Added length and horseshoe-shaped paddles create better slurry than other reamers. Works great in
most soils, sand and clay. Not recommended for use in rock or rocky conditions.
Helical reamer: is a helix of bars loaded with carbide shark teeth. Is an aggressive, low-torque, open/cutter-style
reamer. Works great in most soils, sand and clay. Not recommended for use in rock or rocky conditions.
Hex collar connection: the joint between the starter rod and tooling (drill head, reamer, etc.); is made up by
threading the pieces together, then sliding a hex collar over the hex portion of the starter rod and the tool. A socket
head set screw retains the collar. The threads are intended to handle tensile loads (pulling forces), the hex collar is
intended to handle torsional loads (torque).
Hole-opener: a roller-cone-style, “split-bit” rock reamer that is designed to open up the pilot hole in rock formations.
TCI roller-CONEs are utilized for medium to hard rock; mill teeth are available for soft rock and hardpans.
IADC: Internation Association of Drilling Contractors
IF: API Internal Flush - designates a specific type of API thread.
ITS: iberia thread strand
IWS: iberia work strand
Hex or ITS/Hex: low-profile thread; used on Vermeer tool spuds with a hex collar-type of joint.
Mini-head: this head is designed specifically for compact class Vermeer HDDs (PL8000 – D10x15). Its extremely
small size allows highly aggressive steering and requires the use of a mini-transmitter (which is loaded from the
front end). Intended for use in service installations [curb-to-house, shallow, short installations of 2" (5 cm) OD or
less product]. Attaches to the drill stem.
Mud Motor: pilot boring head utilizing a tricone bit that is powered by the fluid flow.
Multi-duct-puller: a bell-shaped tool with multiple attachment points. Is used to install multiple products in one
operation.
Packer-type reamer: full-body-type reamers. Technically, all Vermeer reamers cut a larger hole than the OD of the
body, although they pack more than they cut. Vermeer reamers that fit this category are the fluted, spiral, bell and
wing/bell reamers. This class of reamer will likely withstand tougher conditions than a cutter-type class of reamer.
(P): pin or male side of joint or thread
180
GLOSSARY
PE: polyethylene
Pull grip: steel mesh, open at one end with a loop on the other. Also referred to as “Chinese fingers”— they are slid
over the outside of the product and their grip tightens as they are pulled (the harder you pull, the tighter they get).
The loop is attached to swivel using a shackle.
Pullback sonde housing: used to locate the reamer; can be positioned behind the reamer or in front of it.
PVC: polyvinylchloride
QuickShot: duck bill with hole in center of leading edge.
R.A.T.T. System: Rock Adaptable Terrain Tool - designed to drill in rock, works in many different types of terrain.
Reamer: a tool that is used to open a hole large enough to install a product.
REG - API Regular: designates a specific type of API thread.
RockFire mallet: air-powered rock-drilling head is used with various bits for different types/hardness of rock
formations. Available as the AS4 — a 4" (102 mm) tool for D24x33 – D40x40.
Rod recycler: used when pre-reaming [i.e. the final reamer size to be used will be 14" (36 cm), so you would pull
through a 10" (25 cm) reamer before pulling the 14" (36 cm)]. Attaching the rod recycler behind the 10" (25 cm)
reamer allows you to pull drill stem in so that you don’t have to push the reamer back through the bore hole.
Roll pins: made from a high-grade, coiled, stainless, spring-steel; are used in the Splinelok I and Splinelok II joints.
In the Splinelok I joint they are used to keep the two pieces from pulling apart, in the Splinelok II joint (and lid) they
are used to lock the solid steel pins in position. Roll pins are also used to attach the various TriHawk bits and secure
lids on some drill heads.
Rotary tooth: a carbide-tipped-CONE-shaped cutting tooth.
RS7: rotary system; a 6" (152 mm)/8" (203 mm) rotary tri-cone rock-drilling head. Powered by standard Vermeer
Navigator drill stem. RS7 available for D24x40 – D40x40. Cuts an approximate 7" (178 mm) hole. RS7 available for
D50x100 - D100x120. Cuts an approx. 8.75" (222mm) hole.
Shackle: horseshoe-shaped with a pin or bolt through open end; is used to attach the product to the swivel. Also
referred to as a clevis.
Shark bit: short, rounded bit with carbide shark teeth mounted along its front and sides, and carbide hardfacing
along its edges. Is an aggressive bit with good abrasion resistance. Works best in hardpans and dry/compacted soils,
and in some softer rock formations.
Shark tooth: a carbide-tipped, chevron shaped cutting tooth.
Side-load/side-load head: refers to a method of inserting or removing a transmitter. A side-load head has a lid or
cover that is attached to the side of the housing. By removing this cover, the transmitter can be accessed. Vermeer
heads in this category include the standard drill head, Splinelok dirt heads and TriHawk heads.
Single eye swivel: this swivel has threads on one end that attach it to the reamer; the other end has a pulling eye.
Solid steel pins: are made from a high-grade, heat-treated steel alloy; are used in the Splinelok II joint to keep the
two pieces from pulling apart. Also used on Splinelok dirt heads and TriHawk heads to attach the lid to the housing.
Solid steel pins have one or two shallow grooves cut around them. These grooves are where the roll pins engage to
lock into position.
Spiral reamer: features a long, tapered body with spiral flighting and shark teeth. Is an excellent choice for use in
cobble. Not intended for use in solid rock.
181
GLOSSARY
Splinelok I and II connection (SPLK I & SPLK II): the joint between the starter rod and tooling (drill head, reamer,
etc.) is made without threads. Tooling has a male and a female side that mate together. Teeth are cut into both the
male and female pieces to mate them up in order to transfer torque; the joint is locked together using multiple pins —
either roll pins or a combination of solid steel pins and roll pins.
Spud: the joint end of a tool; can be threaded or Splinelok.
Standard dirt bit (Duck Bill, Shoe, Plate): a tough and economical heat-treated bit that works well in most nonabrasive, non-rocky, soft/loose soils. Available with optional center pullback hole.
Standard drill head: Vermeer standard drill heads are of the side-load design to allow quick and easy access to
the transmitter. All Vermeer standard drill heads are matched with the capacity of the machine they are used with.
Intended for use in conditions ranging from soft, loose soils to some shale (when equipped with the proper bit). Can
be ordered with the hex collar or Splinelok connection for the PL8000 – D40x40; the head connects directly to the
drill stem on D50x100 and larger machines.
Starter rod: allows the installation and removal of tooling without the use of breakout wrenches — by means of
either a threaded connection with a hex collar, or by a Splinelok I or II system. The hex collar style joint requires the
removal of one small bolt, sliding the collar and unthreading the joint by hand. The threadless Splinelok system
requires the use of a mallet and punch to remove the pins, then the joint simply slides apart.
Sub saver: is attached between the drive chuck and drill stem on some machines; this is the high-wear link that
helps the drive chuck last longer.
Super flute: is a high flow reamer with heat-treated casting for improved wear, increased flute volume, with rotary or
shark teeth in various diameters, a swivel or through shaft, additional cutting and improved teeth
performance, and a through shaft design for added strength and integrity. It’s also rebuildable and has enhanced
connection options.
Super helical reamer: a bar-cutter and helical reamer combined. Works great in most soils, sand and clay. Not
recommended for use in rock or rocky conditions.
SWB: survey while boring.
Swivel: attaches between drill string/tooling and product to keep the product from rotating. All Vermeer swivels are
matched to each class of Navigator HDD.
TCI: Tungsten Carbide Insert
Thread profile gauges: used to inspect thread wear; by placing gauge on thread, you can see if there are
imperfections or uneven wear.
Transition adapter subs: used to crossover between two different thread styles or joint connection styles.
T-Rex reamer: Rugged stacked plate reamer designed for the most extreme drilling conditions. Ideal for hard-packed
material, cobble and soft rock. Available with shark or rotary teeth for effective cutting; strategically placed carbide
hardfacing adds wearability. Available in a through-shaft design or a built-in swivel assembly.
Tri Cone bit: three roller cones, with either mill teeth (machined steel) or TCI (tungsten carbide inserts) for drilling
rock.
TriHawk head: is designed as a modular pilot-boring system. By having different types of bits that are easily
exchanged and an API Reg. (box) thread in the rear of the side-load housing, the TriHawk head can be used in many
different types of conditions — even in some soft-medium types of rock (when equipped with the proper TriHawk bit).
The lid is attached using a combination of solid steel pins and roll pins; the bits are attached with roll pins — no bolts
mean no stripped threads or chance of cross-threading. Can be ordered with the hex collar or Splinelok connection
for the PL8000 – D40x40; the head connects directly to the drill stem on D50x100 and larger machines
TriHawk I bit: is designed for good all-around performance in most soils, including dry/compacted soil, cobble,
broken formations and soft rock. The TriHawk I bit has three replaceable carbide teeth that are available in different
lengths. The longest teeth are the most aggressive and offer the deepest penetration — especially in softer rock.
182
GLOSSARY
The angle of the teeth produces a smooth cutting action — transmitting less vibration through the drill stem. Offers
boltless attachment to the housing via a square-drive Splinelok connection. Available for the D16x20 – D80x120.
TriHawk II bit: is designed for use in hardpans, caliche and some shale. Two long, widely spaced carbide teeth offer
excellent penetration. Offers boltless attachment using a combination of T-slots and roll pins. Bit mounts to the
housing via a square-drive Splinelok (D16x20 – D100x120 only) connection. Available for the PL8000 – D80x120.
TriHawk III bit: two large, carbide teeth provide aggressive cutting action and last longer than smaller teeth. The
tooth angle, the fluid port placement and a large steering surface area allows this the bit to work well in a wide
variety of conditions — from soft soils to soft/medium rock. Features carbide hardfacing for abrasion resistance;
hardfacing can be easily re-applied to rebuild the bit economically and locally. Offers boltless attachment to the
housing via a square-drive Splinelok connection. Available for the D16x20 – D100x120.
TriHawk IV bit: is designed for use in heavy, overburden cobble and fractured rock. Chisel carbides cut and crush
the chips to provide annular space for the housing. Carbide hardfacing along its leading edge provides abrasion
resistance and helps to prevent tooth washout. Offers boltless attachment to the housing via a square-drive Splinelok
connection. Available for the D16x20 – D100x120.
TriHawk V bit: is specifically designed to provide controlled directional drilling in most soils, loose cobble, loose fill
and hardpan. With a unique, cup shape, the leading edge of the bit tapers towards the bits trailing edge — this is the
key to it’s performance. Chisel carbides along the leading edge provide some penetration and allow the bit to drill
through the hardpans; carbide hardfacing along the wear edges provide abrasion resistance and can also be easily
re-applied to rebuild the bit economically and locally. Offers boltless attachment to the housing via a square-drive
Splinelok connection. Available for the D16x20 – D100x120.
UNC: unified national coarse thread.
UNF: unified national fine thread.
Universal Transmitter Housing: Vermeer delivers unmatched ease and versatility on HDD jobsites, and meets
virtually all HDD requirements with Universal Transmitter Housing. Its side-load design provides easy access to
electronics, and the housing is wire-line compatible for long bores or areas with high interference. It features a
unique sonde clocking design and a patent pending system for sonde pitch alignments. High flow capability is ideal
for use with mud motors.
UNJ: unified national j thread
Upset: the “bulge” at either end of the drill stem; is where the vise jaws grip when making up or breaking out joints.
Upset gauges: used to measure wear on drill stem. If you can slide the gauge over the upset of the drill stem, it
means that you have worn .125" (3.2 mm) off of the OD of the stem and the joint strength will be compromised — it’s
time to replace it.
VCP bit: Vermeer carbide point — made from heat-treated 4140 plate steel, a pointed shape aids performance; features multiple carbide buttons along its wear edges for longer life. Works well in most soils and in some fractured formations.
VCT bit: Vermeer carbide tip — made from heat-treated 4140 plate steel; features multiple carbide buttons along its
wear edges for longer life. Works well in most soils and in some fractured formations
VCTT bit: Vermeer carbide twin tooth — the most aggressive plate bit available. Features twin large carbide teeth at
the tip for penetration and hardfacing and carbide buttons along its edges. This bit can be used in most soils and in
some softer rock formations.
Wing-cutter: aggressive, steep bars loaded with replaceable rotary carbide teeth make this a great low-torque
reamer. 8" (203 mm) and larger wing-cutters have a support ring that tie the cutter bars together for added strength.
Works great in most soils, sand and clay. Not recommended for use in rock or rocky conditions.
Wing/Bell reamer: wing-cutter bars followed by a bell that pushes the cuttings and fluid out toward the bore wall.
Works great in most soils and sand. Not recommended for use in rock or rocky conditions.
XH (Extra Hole): designates a specific type of API thread.
183
T H E V E R M E E R D E A L E R N E T W O R K :
RELIABLE SUPPORT, ALL AROUND THE WORLD.
Vermeer Asia Pacific
Singapore 608586
Phone: +65 6516 9560
Fax: +65 6515 9218
Vermeer Corporation
Pella, Iowa 50219 U.S.A.
Phone: (641) 628-3141
Fax: (641) 621-7773
International fax: +1 (641) 621-7730
Vermeer Latin America
Valinhos, SP - Brazil
Phone: +55 19 3881-3848
Fax: +55 19 3881-3848, ext. 108
Vermeer EMEA
(Europe, Middle East, Africa and CIS)
the Netherlands
Phone: +31 113 272700
Fax: +31 113 272727
Call toll-free 1-888-VERMEER
1-888-837-6337 (USA only)
www.vermeer.com
A G L O B A L I N I T I A T I V E
Vermeer Corporation reserves the right to make changes in engineering, design and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation Vermeer and the Vermeer
logo are trademarks of Vermeer Manufacturing Company in the U.S. and / or other countries. CUMMINS is a trademark of Cummins Engine Company. © 2010 Vermeer Corporation. All Rights Reserved.
Printed in the U.S.A.
10/10.1k
PN 152659002

HDD Catalog - 2006

Transcription

Similar documents

transmitter housing adapters