ZG Spec Sheet 12/99

Transcription

ZG Spec Sheet 12/99
ZG/ZC/ZE/ZF SPECIFICATIONS
MODEL PART NUMBER
DISCHARGE
GPM (LPM)
OPERATING PRESSURE
PSI (Bar)
ENGINE
HP
FUEL TANK CAPACITY Gal (Liters)
FUEL
STARTING
PUMP
PAINT
HOSE
GUN
WAND
NOZZLES
WHEELS
LENGTH/WIDTH/HEIGHT
MACHINE WEIGHT
Lbs (Kg)
ZG2-15421
ZG3-20321
ZG2-15425
ZG3-20326
1.8 (6.8)
2.5 (9.5)
1500 (103)
2000 (138)
Briggs
Honda
3.5
5
.65 (2.5)
.50 (1.8)
Regular/Unleaded Gas
Recoil Start
Tri-Plunger, Oil Bath
Tri-Plunger/Axial, Oil Bath
Electrostatically Applied Epoxy Powder Coating
3/8" I.D. x 25', Insulated
Insulated Shut-Off
31" 2-Piece, Stainless Steel
Hardened Stainless Steel (15°) and Brass (Soap)
Hard Rubber
30"x19"x28" (76cm x 48cm x 71cm)
71 (32)
72 (33)
MODEL PART NUMBER
DISCHARGE
GPM (LPM)
OPERATING PRESSURE
PSI (Bar)
PUMP MOTOR
HP
Volts/Phase
Amperage
PUMP
CABINET
HOSE
GUN
WAND
NOZZLES
WHEELS
LENGTH/WIDTH/HEIGHT
MACHINE WEIGHT
Lbs (Kg)
ZE2-11025D
2.0 (7.6)
1000 (69)
1.5
120V, 1Ph
15
Tri-Plunger, Oil Bath
N/A
3/8" I.D. x 25', Insulated
Insulated Shut-Off
31" 2-Piece, Stainless Steel
Hardened Stainless Steel (15°) and Brass (Soap)
Optional Wheel Kit
15"x12"x15" (38cm x 30cm x 38cm)
61 (28)
®
ZC3-15321
ZC3-15325
3.1 (11.7)
1500 (103)
Honda
5.5
1.00 (3.8)
Regular/Unleaded Gas
Recoil Start
Tri-Plunger, Oil Bath
N/A
3/8" I.D. x 25', Insulated
Insulated Shut-Off
31" 2-Piece, Stainless Steel
Stainless Steel (15°) and Brass (Soap)
Optional Wheel Kit
21"x15"x18" (53cm x 38cm x 46cm)
72 (33)
P R E S S U R E WA S H E R S
H A N D Y M A N
S E R I E S
ZG
ZC, ZE and ZF
DIRECT DRIVE • GASOLINE AND ELECTRIC POWERED • COLD WATER
ZF2-10021D
2.0 (7.6)
1000 (69)
1.5
120V, 1Ph
15
Tri-Plunger, Oil Bath
Polyethylene
3/8" I.D. x 25', Insulated
Insulated Shut-Off
31" 2-Piece Wand
Vari-Fan (0° to 45°)
N/A
12"x11"x9" (30cm x 28cm x 23cm)
45 (20)
Note: We are constantly improving and updating our products. Consequently, pictures, features and specifications in this brochure may differ slightly from current models. There may be slight variances in gallonage
and pressures due to variances allowed by manufacturers of our machine components. We attempt to keep our machines performance ±5% of listed specifications. ZG and ZC intended for outdoor use only. Customer is
responsible for any permits, compliance with codes, or other government requirements associated with the installation, use, or disposal of waste associated with this equipment.
SOLUTIONS OTHER EQUIPMENT FROM LANDA
PG: The workhorse of coldwater pressure washers
PHW: The irontough hot-water washer
SGHW: Heavy-duty hotwater cleaning muscle
SJ Front Load: Aqueous
parts washer for large parts
DISTRIBUTED BY:
®
World Headquarters
SJ Top Load: Parts washer
with water-propelled spray bar
www.landa-inc.com
5-YEAR LIMITED WARRANTY • CERTIFIED TO UL SAFETY STANDARDS • ISO-9001 COMPANY
WATER CLEANING SYSTEMS
MEMBER OF
REGISTERED
Made in USA
CLEANING EQUIPMENT TRADE ASSOCIATION
FORM #96-013 • 12/99 • LANDA, INC. • 4275 Pacific Rim Blvd., Camas, Washington 98607 USA
HOT AND COLD WATER
PRESSURE WASHERS
AUTOMATIC AQUEOUS
PARTS WASHERS
ACCESSORIES
AND PARTS
ZG/ZC
ECONOMY, GASOLINE-DRIVEN MODELS
Discover Why LANDA Is the Only Pressure Washer Built to Last!
Gas Engine: 3.5 hp Briggs & Stratton or
5.5 hp Honda engine with low-tone
muffler for quiet operation.
Straight-Through Wand:
Spring-Loaded Trigger
Gun: For safe control of high
Swivel Swedge Fitting: For tangle-free handling of hose and trigger gun.
pressure spray and convenience
of remote operation.
Stainless steel wand for pointand-shoot effectiveness.
24" Safety Hose Guard:
Gives strain relief to hose connection and diverts spray from
operator in the event of
hose failure.
ZG
Tri-Plunger Pump: Oil-bath, direct-drive,
forged brass head pump has
5-year limited warranty on oil-end
of pump, lifetime warranty
on pump head.
pressure-trapping unloader diverts water flow
when trigger gun is not in use.
®
Certified
to UL-1776
Standards
Thermal Pump Protector:
Protects pump from overheating
in bypass (not visible).
Durable Tires:
Solid rubber
tires on noncorrosive
wheels make
for added
portability and easy maneuvering.
Heavy-Duty
Chassis:
Made of
reinforced steel
with powder-coat
epoxy finish.
Downstream
Chemical
Injector:
For low-pressure application of soap and other cleaning agents.
Brass and
JIC Fittings:
Easy to service
and corrosionproof.
High-Pressure Hose: 25 ft. of insulated steel wire braid hose rated for up to
3000 psi.
Rubber Pad Feet: Designed to absorb vibration
and help prevent the washer from "walking."
ZC: Hand-held, gasoline-driven
®
cold-water pressure washer
The ZC pressure washer is almost identical to the
ZG except that it is not mounted on a wheel cart
and it has these unique features:
■ Honda Engine: Reliable, overhead valve
engine with 5.5 hp delivers plenty of
punch for 3.1 gpm and 1500 psi.
■ Hand Grip: Durable,
epoxy-coated, steel handle
is positioned to make carrying more evenly balanced.
pressure spray and convenience
of remote operation.
Gives strain relief to hose
connection and diverts spray
from operator in the event
of hose failure.
Certified
to UL-1776
Standards
Tri-Plunger Pump: Oil-bath, directdrive, forged brass head pump has limited
5-year limited warranty on oil-end of pump,
lifetime warranty on pump head.
Quality Unloader: Durable pressure-trapping unloader diverts water
flow when trigger gun is not in use.
Brass and JIC Fittings: Easy
Balanced Grip: With waffle
grip for ease in carrying.
instructions in English,
Spanish and French.
For easy attaching
and detaching of
nozzles.
24" Safety Hose Guard:
For convenient carrying and access to hose.
Tri-Lingual
Labels: Operating
Quick-Connect Coupler:
Spring-Loaded Trigger
Gun: For safe control of high
to service and corrosion-proof.
niently mounted 15°
stainless steel high
pressure and brass
soap nozzles.
Discover Why LANDA Is the Only Pressure Washer Built to Last!
Swivel Swedge Fitting: For tanglefree handling of hose and trigger gun.
Hose Hanger:
Quick-Release
Nozzles: Conve-
Quality Unloader: Durable
ZE/ZF
ECONOMY, ELECTRIC-DRIVEN MODELS
Straight-Through Wand:
Stainless steel wand for point-andshoot effectiveness.
Quick-Connect Nozzles:
Cord Hanger: For convenient carrying of power cord.
ZE
Rugged Motor:
Reliable, industrial
motor with reset button, capacitor start
and full-service factor for longer life.
®
QuickConnect
Coupler:
Certified
to UL-1776
Standards
For easy attaching and detaching
of nozzles.
Rubber Pad
Feet: Absorb
vibration and
help prevent
washer from
“walking.”
Tri-Lingual
Labels: Operating
HighPressure Hose: 25
instructions in English, Spanish and
French.
ft. of insulated steel wire braid hose
with quick coupler rated for up to 3000 psi.
Downstream
Chemical Injector: For lowpressure application
of detergents.
ZF: Hand-held,
electric-driven, cold-water
pressure washer
ZF
Electric Cord: 35 feet
with NEC approved
Ground-Fault Interrupter
for operator protection.
Thermal Pump
Protector: Protects
pump from overheating in
bypass (not visible).
®
Certified
to UL-1776
Standards
The ZF is a more economical model with a
variety of unique features, including:
■ Durable Housing: Water-resistant polyethylene housing.
ZC
Conveniently mounted 15°
high pressure and brass
soap nozzles (not
visible).
■ Tri-Plunger Pump: General, oil-
bath, direct-drive, forged, brass head
pump for longer life.
■ Pressure Gauge: For monitoring
adjustments in water pressure.
■ Chemical Metering Valve: For
regulating flow of soaps.
■ Inline Filter: 1/2-inch strainer
protects pump from debris.
■ Vari-Fan Nozzle: Twist of nozzle can adjust spray pattern between 0°
to 45°.
■ Trigger Gun with Safety
Lock: For safe control of high pressure spray and remote operation.
■ On/Off Switch: Water-protected,
heavy-duty rocker switch for turning
the unit on and off.
■ Hi-Low Pressure Wand: Easy
hand adjustment at the nozzle end reduces
pressure for chemical injection or increases
pressure for rinse operation.
■ High-Pressure Hose: 25 ft. of
■ Variable Pressure: Easy-to-
high pressure hose with threaded hose
coupling for a secure connection.
access knob for adjusting pressure from
0-1000 psi.