CELLWOOD VINYL SIDING AND SOFFIT
Transcription
CELLWOOD VINYL SIDING AND SOFFIT
CELLWOOD VINYL SIDING AND SOFFIT SPECIFICATIONS AND CONFORMANCE Cellwood Vinyl Siding and Soffit products are designed for use in residential and light commercial applications. FINISH Cellwood Vinyl Siding and Soffit are produced from PVC compound containing quality color pigments to provide color throughout thickness of panel. Close control of color and gloss is maintained to provide for an attractive, weatherable surface. Textured vinyl panels are uniformly embossed to provide an attractive woodgrain pattern. MANUFACTURING PHYSICALS Solid Vinyl Siding, Soffit and Accessories are extruded polyvinyl chloride (PVC) compound as defined in ASTM D3679, “Standard Specification for PVC Siding.” The cell classification as defined by ASTM D1784 is 13344-B. Cellwood PVC resin meets or exceeds the properties listed here: Tensile strength (psi) Tensile modulus (psi) Specific gravity Hardness (Shore D) Heat deflection under load 264 psi Izod impact strength (ft.-lbs./in. of notch) Chemical resistance Coefficient of linear expansion 7,100 - 7,600 360,00 - 400,000 1.39 - 1.49 76 ± 3 170ºF 3.3 Excellent 2.9 (73.7) X 10-5 THICKNESS All Cellwood Vinyl Siding and Soffit panels exceed requirements per ASTM D3679 section 4.2. Siding Thickness (nominal) Dimensions™ Dimensions Beaded® Progressions® Evolutions® .044" (1.12) .046" (1.17) .042" (1.07) .040" (1.02) Soffit Thickness (nominal) Triple 4" Vinyl Soffit Double 5" Beaded Soffit .040" (1.02) .046" (1.17) .040" (1.02) Note: All measurements in ( ) are in millimeters (mm). SOFFIT VENTILATION AREA (Free air space in sq. in./sq. ft.) Triple 4" Full-Vent 5.87 sq. in. Triple 4" Center-Vent 1.96 sq. in. Double 5" Ventilated 7.53 sq. in. Beaded Ventilated 1.54 sq. in. IMPORTANT FIRE SAFETY INFORMATION Exterior vinyl building materials require little maintenance for many years. Nevertheless, common sense dictates that builders and suppliers of vinyl products store, handle, and install vinyl materials in a manner that avoids damage to the product and/or structure. Owners and installers should take a few simple steps to protect vinyl building materials from fire. To Home and Building Owners Rigid vinyl siding is made from organic materials and will melt or burn when exposed to a significant source of flame or heat. Building owners, occupants, and outside maintenance personnel should always take normal precautions to keep sources of fire, such as barbecues and combustible materials, dry leaves, mulch, and trash away from vinyl siding. To the Building Trades, Specifiers, Professionals and Do-It-Yourselfers When rigid vinyl siding is exposed to significant heat or flames, the vinyl will soften, sag, melt, or burn, and may thereby expose material underneath. Care must be exercised when selecting underlayment materials because many underlayment materials are made from organic materials that are combustible. You should ascertain the fire properties of underlayment materials prior to installation. All building materials should be installed in accordance with local, state, and federal building code and fire regulations. Wall Fire-Resistance Matrix Wall Interior System Underlayment 1/2" Gypsum Any Non-Rated Conventional Board Wall Construction Exterior Sheathing Any Conventional Materials Any One-Hour Conventional Rating Construction 5/8" 1 Layer of Gypsum Board Must Include 1 Layer of 5/8" Gypsum Board Any Two-Hour Conventional Rating Construction 5/8" 2 Layers of Gypsum Board Must Include Two Layers of 5/8" Gypsum Board Popular Residential Claddings* Wood Plywood OSB Hardboard Steel Aluminum Vinyl *Note: Fire-treated versions may also be available for some popular wood-based siding products For general information about vinyl siding products, contact the Vinyl Siding Institute, 1275 K St. NW, Washington, DC 20005-4006. Request brochures titled “Fire Properties” or “What Homeowners Want to Know.” WARRANTY Cellwood backs its Vinyl Siding and Soffit with a lifetime limited warranty. Many products also include hail coverage. Consult actual warranty certificates for complete coverage details. RELEVANT STANDARDS/CODES Cellwood Vinyl Siding products meet or exceed the following standards and/or code approvals: Industry Standards ASTM ASTM ASTM ASTM BOCA ICBO SBCCI Metro Dade Texas State Board of Insurance Ruling Fire-Resistance Ratings ASTM E84 Flame spread Fuel contribution Smoke Density less than 20 0 400 Building Codes D284 (U.B.C. #52-2) D635 E84 D3679 94-25 1478 9623 99-0610.3 EC-27 ASTM D635 Avg. time of burning less than 5 sec. Avg. length of burning 20 mm ASTM D2843 (U.B.C. #52-2) Smoke density 48 1590 Omega Drive • Pittsburgh, PA 15205 • 800-335-6701 © 2004 Alcoa Home Exteriors, Inc. CSCAT P0401/C0401 V I N Y L S I D I N G C O L L E C T I O N V I N Y L S I D I N G C O L L E C T I O N C O L O R ® Why Color is So Important Vinyl Siding Collection Page 5 Page 9 Corner Posts Page 14 Lineals & Casings Page 14 Cellwood quality begins with an unsurpassed manufacturing process – resulting in products made to rigid specifications using only the best materials. Our high-strength construction makes our vinyl siding among the most durable on the market, but most important, our authentic designs and realistic woodgrain finishes are offered in the colors and styles homeowners want most. Color er Khaki r Tri mC Trim Shu tt r olo m C ng Color Sidi Color er olo The Cellwood Vinyl Siding Collection includes: Dimensions, Dimensions Beaded, Progressions and Evolutions – that’s four distinct product lines, five unique profiles, 14 classic colors and four premium cedar colors; each designed to provide quality and beauty, while increasing the value of your customers’ homes. Bayberry White Ivory Page 15 White Trim Green Black Pewter Blue ng Color Sidi ng Color Sidi Color er Color er r Vinyl Siding & Soffit Accessories ng Color Sidi olo Vinyl Accessories i Painted Tr Shu tt Page 13 Sand Spanish Moss Shu tt Vents The Cellwood Vinyl Siding Collection provides homeowners with several product choices that complement any architectural style. And because our vinyl siding never needs painting or staining, you can achieve the look of real wood without the chipping, flaking and peeling that comes with it. r Page 11-12 olo Pages 8-9 Mounts Color And Design Color er Cream Our color professionals have carried out extensive color research over the last forty years – identifying and forecasting color trends. This research is behind our appealing palette of colors for siding, trim, shutters and rain removal products. Whether you are trying to change the mood of a home, change a perception of size, add emphasis, create interest or achieve unity – our color combinations can work for you. Shu tt Evolutions® ng Color Sidi Pages 6-7 Shu tt Progressions® C • Bolder colors give your home a lively, more dramatic appearance. • Softer, subdued tones create a more restful setting. • To make a smaller home appear larger, use light coordinating colors of similar intensities. • To make a larger home appear less massive, use dark, contrasting colors. • The use of colors that contrast can make a home with simple straight lines become more eyecatching. • Small homes look better with fewer colors. • Larger, more ornate homes can handle a main color plus several accents. • Consider your home’s orientation to the sun and shade. Colors look brighter under the glare of sun and darker in shade. • Color adds personality to your home – make sure that your home exudes your personality through the choice of colors. Chestnut Spanish Moss C Green ng Color Sidi i Painted Tr Color er Shu tt Dimensions Beaded® Trim r Pages 4-5 White Colo Dimensions™ Winestone r Page 3 Autumn Tan Colo Marketing Support Things to know to make color work for you: m Page 2 Color er Shu tt Introduction D E S I G N ng Color Sidi We live in a world of colors. Color adds life to everything we see. It defines shapes, affects proportions, expresses personality and even influences our mood. That’s why color is such an important choice when designing or refining your home’s exterior. The right combination of colors will help to accent architectural style and increase aesthetic appeal. By understanding color relationships – knowing why a particular assortment of colors “works” – you are better prepared to make color decisions you will be happy with for years to come. Table of Contents A N D Wicker Dark Spruce And because Cellwood is a trusted brand of Alcoa, you can rest assured that all of the products we offer are constructed to exacting standards – ensuring superior durability and genuine beauty that will last for years to come. olo r Cream Trim C ng Color Sidi Shu tt Color er Beige Pebblestone Clay r Beige olo 800-335-6701 Trim 2 C 15 V I N Y L A C C E S S O R I E S 51/2" 3/4" 2" 2" FF0P55 Fluted 5 1/2" Outside Corner Post with Foam Insert Length: 20' 4 Pcs./Ctn. Displays TF0P55 Traditional 5 1/2" Outside Corner Post with Foam Insert Length: 20' 4 Pcs./Ctn. Turn Any Floor Space into Sales Space. Select from a variety of display methods to improve the effectiveness of your sales space, and feature the following products: Dimensions, Dimensions Beaded, Progressions and Evolutions. Decorative Corner Posts Add Extra Architectural Interest. • Made from a high-impact, fade-resistant vinyl • Duplicate the look of authentic corner board framing without the maintenance • Subtle matte finish • Looks like wood but easier to maintain – no cracking, splitting, or warping • Unique fastening system for brick or siding • Available in white, ivory, sand, khaki and pewter Free-standing unit can display one product up to four products 2" BAY0P06 Bay Corner 3/4" Nominal .042" Thick Length: 10' 10 Pcs./Ctn. 2" Wall mount display for limited space 3/4" Lineals & Window Casings Highlight Your Style with Distinctive Details. • Multiple design options to suit any architectural style • Low-gloss, matte finish never needs painting 15/16" • Made from high-impact, fade-resistant vinyl 1/2" • Available in white, ivory, sand, khaki, and pewter 5" 5" 1" 11/2" 9/16" 3/4" 13/4" 15/16" 1/2" 3/4" 1/2" LINF504 5" Fluted Corner Lineal Length 20' 4 Pcs./Ctn. Available in white only 1" 3/4" WCT06 2 1/2" Wide Window Casing Trim - 3/4" Nominal .040" Thick Length: 12'6" 20 Pcs./Ctn. 14 Give Them Just a Sample of What’s in Store. Product samples help to close the deal by providing actual product pieces, allowing homeowners to see the true appearance and color of the product. 13/4" 13/4" 1/2" LIN35420 3 1/2" Window & Door Casing Lineal Length 20' 4 Pcs./Ctn. Our Brochures Help Tell the Story. An assortment of brochures is available to highlight features and benefits of the entire Cellwood product lines. 3/4" 5/8" 9/16" 3/4" Product Brochures LINQRSS4 Corner Starter & Insert Length 20' 4 Pcs./Ctn. 21/32" 19/16" 15/16" 9/16" 9/16" 31/2" 21/2" Samples 19/16" LIN504 5" Corner Lineal Length 20' 4 Pcs./Ctn. 31/2" S U P P O R T Cellwood is committed to providing you with the materials you need to ensure a successful sales effort. From brochures to displays to advertising, we’re sure you’ll find what you need to sell Cellwood brand products. 5 1/2" 3/4" M A R K E T I N G ® 9/16" 2° 1" Electronic Advertising Kit 1/2" WCNCSS New Construction Window & Door Casing Starter Length 12'6" 40 Pcs./Ctn. Available in white only WCRRSS Remodeling Window & Door Casing Starter Length 12'6" 40 Pcs./Ctn. Available in white only Personalized Advertising To Go! Create your own advertising with our helpful and pre-designed templates, photography, logos, and more. Technical Information Behind You Every Step of the Way. We provide you with all the necessary installation, warranty, and specification information required to finish the job right. When completing an exterior renovation or building a new home, choose coordinating products from the family of brands offered by the Alcoa Retail Brands Group. From Cellwood vinyl siding, shutters, Designer Accents, vents and mounts to Alumax metal products, our family now includes the wide range of choices necessary to tastefully outfit nearly every aspect of your home’s exterior. And because our brands are backed by Alcoa, you can be sure that every product we make is backed by a widely-recognized and respected industry leader. Now more than ever, when you want to finish your home with style, you can count on the Cellwood and Alumax brand names for: Vinyl Siding Standard and Custom Shutters Vinyl Soffit Dentil Moldings Decorative Corner Posts Door Surround Systems Mantel Systems J-Block® Mounts Dryer Vents Gable Vents Lineals and Window Casings Aluminum Soffit and Fascia Rain Removal Systems Gutter Protection Systems 3 V I N Y L S I D I N G C O L L E C T I O N ™ V E N T S ® Air Vent (Foundation Vent)® (Patent # 5,293,920) The two-piece Air Vent is used for cross-ventilation of garages, foundations, and range hoods. Design allows for open or closed flaps. The molded mesh helps prevent insect intrusion. Louvered Exhaust Vent The Louvered Exhaust Vent is used to vent dryers and bathroom exhaust fans. The unique design includes a built-in grid to prevent bird intrusion and a 10" long metal tube that can be used for extra-thick walls. A 4" to 3" diameter reducer is also available. Intake Louver Soffit Intake The Intake Louver is designed to be used with the Louvered Exhaust Vent when constant airflow is required. Primarily used for high-efficiency furnaces, fireplaces, and bathroom eave exhausts. The Soffit Intake provides necessary air movement through the attic and roof system to remove moist air with fresh air. Can be used with bathroom and kitchen exhausts. 7 1/2" 7 1/2" 4" 8" 8" Closed Position Product Code: INTVENT Surface Dimension: 8" X 8" Flange Dimensions: 7 1/2" X 7 1/2" Net Free Area: 9.2 square inches Open Position Hooded Exhaust Vent Vent Trusted for years by both consumers and contractors alike, Cellwood is continually looking for opportunities to improve our products. Now, in addition to the authentic look of wood without the maintenance, our Dimensions premium siding offers these features: • Folded Nail Hem – withstands hurricane force winds • Full, 5/8" Profile Height – for realistic shadow lines and greater panel rigidity • Oversized Lock Mechanism – stronger, positive locking action and greater panel rigidity • .044 Thickness – for higher impact resistance • Authentic Cedar Texture – for the authentic look of real wood • Full-Length Return – for more secure locking • Limited Lifetime Warranty Spend less time maintaining your home and more time doing the things you want to do with the convenience and beauty of Dimensions premium vinyl siding. 4 Classic Colors Color clear-through formulation means scratches and nicks won’t show. White Ivory Almond Beige • Snap-on installation • Built-in grate keeps animals out Installed Autumn Tan Sand 7 1/2" Wicker Khaki Mist Stone Gray Pewter 4" Slate Blue DIA T ME ER Installed 4 7/8" Bayberry Nantucket Gray 10" LONG TUBE 8 1/2" Installed NOTE: Colors shown are mechanically produced and may vary from actual product. Please refer to the actual product sample for true color representation. 4 7/8" 4 5/8" 12 3/4" Longer Lasting For enhanced weatherability and resistance to fading, darker colors use quality GELOY® resins manufactured by GE Plastics. Double 4" Double 41/2" Dutch Lap DM40 Dimensions Double 4" Nominal .044" Thick Length: 12' 6" DMD45 Dimensions Double 41/2" Nominal .044" Thick Length: 12' 1" Hooded Exhaust Vent 4 3/4" 7 3/4" Without GELOY resin With GELOY resin 8 3/4" Product Code: AIRVENT (150) Net Free Area: 19 square inches Surface Dimensions: 7" x 11" Flange Dimensions: 7 3/4" x 12 3/4" J-Channel I.D.: 3/4" adjusts to 11/4" ®GELOY is a registered trademark of General Electric Company Product Code: EXVENT (130) Surface Dimensions: 7" x 7" Flange Dimensions: 8 1/2" x 7 1/2" J-Channel I.D.: 3/4" adjusts to 11/4" Tube Length: 10" Tube Diameter: 4" Reducers Available: 4" to 3" 4 5/8" 6 5/8" Product Code: INTAKE (190) Size: 4 5/8" H x 4 5/8" W x 13/8" D Net Free Area: 5.5 square inches 6 5/8" 4" 6 7/8" 6 7/8" Product Code: DRYERHOOD 3/4" Siding Receiver; 1" Depth Neutral Base 13 M O U N T S Mini J-Block® Mounting Blocks The Mini J-Block Mounting Blocks are designed to mount small accessories such as doorbells and electrical outlet receptacles. • Compatible with all siding profiles • Creates a low-profile, finished look • Rich, textured appearance accented by routered edge • Available in over 100 colors – and color is molded through to ensure fade resistance • Lifetime limited warranty V I N Y L ® C O L L E C T I O N Folded Nail Hem– provides stronger, more secure installation than Standard Nail Hem shown below Doorbell Buttons Create a Unique Style Electrical Outlet Receptacles Standard Nail Hem Authentic beaded profile creates the appearance of hand-crafted wood clapboard. 6 7/8" Product Code: MBLOCK (025) Surface Dimensions: 6" x 4 3/8" Flange Dimensions: 6 7/8" x 5 1/4" J-Channel I.D.: 3/4" adjusts to 11/4" Knockouts Round: 11/8" Diameter Rectangle: 2 3/8" x 3 3/4" Oversized Lock Mechanism– provides stronger positive locking action 4 3/8" 2 3/8" Full-Size Lock – provides stronger, more secure installation 5 1/4" 11/8" Diameter Full 5/8" Profile Height– panels hang straighter and are more rigid than standard vinyl siding panels 3 3/4" 6" Meter Base J-Block® .046" Thickness .044" Thickness The Meter Base J-Block is designed to mount large accessories such as hose racks and electric meter bases. • Compatible with all siding profiles • Available in over 100 colors – and color is molded through to ensure fade resistance • Lifetime limited warranty Full-Length Return– so panels don’t come unlocked 11/16" Realistic Woodgrain Texture New Cedar Colors 16 3/4" Few woods can compare to the warmth and beauty of cedar. But like any other wood product, there’s the maintenance that comes with it. Our new cedar colors employ an exclusive manufacturing process using Kynar 500 along with multiple layers of cedar 16 1/2" ® 18 1/2" Product Code: METER (140) Surface Dimensions: 16 1/2" x 151/2" Flange Dimensions: 18 1/2" x 16 3/4" J-Channel I.D.: 3/4" 15 1/2" Hose Racks S I D I N G Kynar 500® Finish (clear coat) Electric Meter Bases Print Coat 1 (grains/ticking) Print Coat 2 (shading/undertones) Thermal Mechanical Weld Coat 1 Full-Length Return– so panels don’t come unlocked Classic Colors Color clear-through formulation means scratches and nicks won’t show. Thermal Mechanical Weld Coat 2 Solid Vinyl Substrate E-Z Block™ Surface Mounts The one-piece design can be used after siding installation to mount all types of accessories. Cellwood offers sizes to fit Double 4, Double 5, Dutch Lap and Triple 3 siding profiles. • Available in square or octagon • Compatible with all siding profiles • Creates a low-profile, finished look • Rich, textured appearance accented by routered edge • Available in over 100 colors – and color is molded through to ensure fade resistance • Lifetime limited warranty 12 White Ivory Almond Autumn Tan Wicker Pewter 3/4" 6 3/4" 3 3/4" 2 3/8" 6 3/4" Light Fixtures Surface Dimensions: 6 3/4" x 6 3/4" 3/4" Projection: Knockouts Round: 1" Diameter Rectangle: 2 3/8" x 3 3/4" Water Faucets* E-Z Block graining and shading for superior fade resistance, remarkable texturing, and rich colors. But most important, because it’s a quality Cellwood vinyl product, you’ll never have to paint it, stain it, or replace it due to mold or wood-boring insects. • 25% less expensive than real cedar • Resists cracking, splitting, and shattering • Available in Double 4" and Dutch Lap 41/2" profiles • Four rich cedar colors to choose from Chestnut *Octagon block specifications not shown Spruce Blue Weathered Ash Juniper NOTE: Colors shown are mechanically produced and may vary from actual product. Please refer to the actual product sample for true color representation. Beaded DMB65 Dimensions Beaded 6 1/2" Nominal .046" Thick Length: 12' 4" 5 V I N Y L S I D I N G C O L L E C T I O N M O U N T S ® J-Block® Mounting Blocks ® (Patent # 4,726,152) The J-Block mounting blocks provide multiple uses, including the ability to easily and attractively mount light fixtures and receptacles. • Compatible with all siding profiles • Creates a low-profile, finished look • Rich, textured appearance accented by routered edge • Available in over 100 colors – and color is molded through to ensure fade resistance • Lifetime limited warranty 7" Receptacles Light Fixtures FMOUNTSNB 3/4" Siding Receiver; 1" Depth 7 1/2" Surface Dimensions: 7" x 7" Flange Dimensions: 8 1/2" x 7 1/2" J-Channel I.D.: 3/4" adjusts to 11/4" Knockouts Round: 4" Diameter Rectangle: 2 3/8" x 3 3/4" 8 1/8" 8" 7" 3 3/4" 81/2" 2 3/8" Product Code: Mounting Block 4" Diameter 7" BLOCK (020) 7 1/8" Fixure Mount Large J-Block® Mounting Blocks With Progressions® vinyl siding, you get the beauty of wood siding without the work and maintenance. The durable construction and low-gloss heavy woodgrain texture combine to set the standard for quality and beauty, while increasing the value of your home. • Never needs painting or staining, so chipping, flaking, and peeling are things of the past • Does not absorb water, which eliminates warping, cracking, splitting, and rotting • Resistant to fungus, mildew, and wood-boring insects • Looks better longer by resisting impact, weather extremes, pollutants, and UV light • Lifetime limited warranty 6 Classic Colors Color clear-through formulation means scratches and nicks won’t show. White Ivory Wicker Khaki Bayberry Nantucket Gray Almond Mist Beige Stone Gray Sand Pewter Autumn Tan The Large J-Block Mounting Blocks are designed to mount larger accessories such as large light fixtures, house numbers, and mailboxes. • Compatible with all siding profiles • Creates a low-profile, finished look • Rich, textured appearance accented by routered edge • Available in over 100 colors – and color is molded through to ensure fade resistance • Lifetime limited warranty Slate Blue Large Light Fixtures 2 3/8" 11" Double 4" Double 5" Double 41/2" Dutch Lap Triple 3" PG40 Progressions Double 4" Nominal .042" Thick Length: 12' 6" PG50 Progressions Double 5" Nominal .042" Thick Length: 12' PGD45 Progressions Double 41/2" Nominal .042" Thick Length: 12' 1" PGT3 Progressions Triple 3" Smooth Nominal .042" Thick Length: 12' 1" 81/8" 8" 31/2" 12 3/4" 2 1/4" 71/8" 7" 4" Diameter Recess J-Block® Mounting Blocks (Patent #5,526,619) The patented hinge allows for ease of installation without removal of electrical receptacles and water faucets. • Compatible with all siding profiles • Available in over 100 colors – and color is molded through to ensure fade resistance • Lifetime limited warranty 7" 7 3/4" Product Code: FMBLOCK (027) Surface Dimensions: 7" x 11" Flange Dimensions: 7 3/4" x 12 3/4" J-Channel I.D.: 3/4" adjusts to 11/4" Knockouts Round: 4" Diameter NOTE: Colors shown are mechanically produced and may vary from actual product. Please refer to the actual product sample for true color representation. Mailboxes House Numbers UL Block 5 7/8" 3 5/8" 7" 4 7/8" 5 1/4" 7/8" 3 1/8" Electrical Outlet Receptacles 5 1/4" 21/4" x 37/8" KNOCKOUT 7 1/2" Product Code: MBLOCKR (026) Surface Dimensions: 51/4" x 7" Flange Dimensions: 5 7/8" x 7 1/2" J-Channel I.D.: 3/4" adjusts to 11/4" Knockouts Rectangle: 21/4" x 3 7/8" 11 V I N Y L Premium Vinyl Soffit S O F F I T 12" Complete the job with vinyl soffit that is available in matching colors and constructed to the same exacting standards as our vinyl siding. • Can be used as a soffit, vertical siding, or wainscoting • Ideal for use on porch ceilings and carports • Panels held securely in place with specially designed locking system • Low-gloss finish 4" 5/8" ® V I N Y L 4" 5/8" 12" 4" 5/8" C O L L E C T I O N VST4N Triple 4" Premium Soffit Non-Ventilated Panel Nominal .040" Thick Finish: Matte Length: 12' Available in all vinyl siding colors (Warranted for sidewall use) 12" S I D I N G Full-Size Lock – provides stronger, more secure installation VST4FV Triple 4" Premium Soffit Full-Ventilated Panel Nominal .040" Thick Finish: Matte 5.87 Sq. In. N.F.A./Sq. Ft. Length: 12' Available in all vinyl siding colors .042" Thickness Full 1/2" Profile Height– panels hang straighter and are more rigid than standard vinyl siding panels VST4CV Triple 4" Premium Soffit Center-Ventilated Panel Nominal .040" Thick Finish: Matte 1.96 Sq. In. N.F.A./Sq. Ft. Length: 12' Available in white only Full-Length Return– so panels don’t come unlocked 10" 5" 5" 5/8" VSD5FV Double 5" Premium Soffit Ventilated Panel Nominal .046" Thick Finish: Brushed 7.53 Sq. In. N.F.A./Sq. Ft. Length: 12' Available in all vinyl siding colors 10" 5" VSD5N Double 5" Premium Soffit Non-Ventilated Panel Nominal .046" Thick Finish: Brushed 7.53 Sq. In. N.F.A./Sq. Ft. Length: 12' Available in all vinyl siding colors 5" 5/8" (Warranted for sidewall use) 2 2/3" 3/8" 10 8" 2 2/3" 2 2/3" VSB223V Cellwood 8" Ventilated Soffit Nominal .040" Thick Finish: Matte 1.54 Sq. In. N.F.A./Sq. Ft. Length: 12'6" Available in white, ivory, beige, sand, autumn tan, pewter, and khaki 2 2/3" 3/8" 8" 2 2/3" 2 2/3" VSB223N Non-Ventilated Soffit/Wainscot Nominal .040" Thick Finish: Matte Length: 12'6" Available in white, ivory, beige, sand, autumn tan, pewter, and khaki (Warranted for sidewall use) Realistic Woodgrain Texture Smooth Triple 3" Surface All Cellwood products undergo rigorous testing, certification, and quality control. Without GELOY resin With GELOY resin ®GELOY is a registered trademark of General Electric Company Longer Lasting For enhanced weatherability and resistance to fading, darker colors use quality GELOY® resins manufactured by GE Plastics. 7 V I N Y L S I D I N G C O L L E C T I O N V I N Y L ® S I D I N G C O L L E C T I O N Vinyl Siding & Soffit Accessories ® Full-Size Lock– provides stronger, more secure installation CELLWOOD 3" 5/8" 11/2" 23/4" 1/4" 1/4" VS12 Starter Strip Vinyl Nominal .053" Thick Length: 12' 6" Available in white only COMPETITOR VOCP58N Universal Outside Corner Post - 5/8" Nominal .046" Thick Length: 10' Available in all vinyl siding colors .040" Thickness Full 1/2" Profile Height– increases rigidity, so panels will hang straighter 2" 3/4" 21/2" 1/2" CELLWOOD AVS12 Starter Strip Aluminum (Spring Style) Nominal .019" Thick Length: 12' 6" Available in mill finish only 3/8" COMPETITOR Full-Length Return– so panels don’t come unlocked VICP345 Inside Corner Post - 3/4" Nominal .042" Thick Length: 10' Available in all vinyl siding colors 3/8" Evolutions® vinyl siding is designed to provide the beauty of wood siding in a low-maintenance exterior. The various profiles and durable construction are just the beginning of the beauty and value Evolutions adds to your home. • Never needs painting or staining, so chipping, flaking, and peeling are things of the past • Does not absorb water, which eliminates warping, cracking, splitting, and rotting • Resistant to fungus, mildew, and wood-boring insects • Looks better longer by resisting impact, weather extremes, pollutants, and UV light • Lifetime limited warranty Realistic Woodgrain Texture Classic Colors Color clear-through formulation means scratches and nicks won’t show. White Ivory Beige Sand Wicker Khaki Pewter Slate Blue CELLWOOD COMPETITOR VJCB38 Beaded J-Channel- 3/8" Nominal .040" Thick Length: 12' 6" Available in white, ivory, beige, sand, autumn tan, pewter, and khaki Without GELOY resin With GELOY resin 11/2" 3/4" VJC58 All Purpose J-Channel - 5/8" Nominal .040" Thick Length: 12' 6" Available in all vinyl siding colors ®GELOY is a registered trademark of General Electric Company Longer Lasting For enhanced weatherability and resistance to fading, darker colors use quality GELOY® resins manufactured by GE Plastics. 3/4" 11/2" 8 13/8" 5/8" Autumn Tan NOTE: Colors shown are mechanically produced and may vary from actual product. Please refer to the actual product sample for true color representation. 2 3/8" Double 4" Double 5" Double 41/2" Dutch Lap EL40 Evolutions Double 4" Nominal .040" Thick Length: 12' 6" EL50 Evolutions Double 5" Nominal .040" Thick Length: 12' ELD45 Evolutions Double 41/2" Nominal .040" Thick Length: 12' 1" 3/4" VFT20 Finish Trim Nominal .056" Thick Length: 12' 6" Available in all vinyl siding colors 13/4" 5/8" VFC58 F-Channel - 5/8" Nominal .042" Thick Length: 12' 6" Available in all vinyl siding colors NOTE: Accessories are available in a variety of popular colors. 9 V I N Y L S I D I N G C O L L E C T I O N V I N Y L ® S I D I N G C O L L E C T I O N Vinyl Siding & Soffit Accessories ® Full-Size Lock– provides stronger, more secure installation CELLWOOD 3" 5/8" 11/2" 23/4" 1/4" 1/4" VS12 Starter Strip Vinyl Nominal .053" Thick Length: 12' 6" Available in white only COMPETITOR VOCP58N Universal Outside Corner Post - 5/8" Nominal .046" Thick Length: 10' Available in all vinyl siding colors .040" Thickness Full 1/2" Profile Height– increases rigidity, so panels will hang straighter 2" 3/4" 21/2" 1/2" CELLWOOD AVS12 Starter Strip Aluminum (Spring Style) Nominal .019" Thick Length: 12' 6" Available in mill finish only 3/8" COMPETITOR Full-Length Return– so panels don’t come unlocked VICP345 Inside Corner Post - 3/4" Nominal .042" Thick Length: 10' Available in all vinyl siding colors 3/8" Evolutions® vinyl siding is designed to provide the beauty of wood siding in a low-maintenance exterior. The various profiles and durable construction are just the beginning of the beauty and value Evolutions adds to your home. • Never needs painting or staining, so chipping, flaking, and peeling are things of the past • Does not absorb water, which eliminates warping, cracking, splitting, and rotting • Resistant to fungus, mildew, and wood-boring insects • Looks better longer by resisting impact, weather extremes, pollutants, and UV light • Lifetime limited warranty Realistic Woodgrain Texture Classic Colors Color clear-through formulation means scratches and nicks won’t show. White Ivory Beige Sand Wicker Khaki Pewter Slate Blue CELLWOOD COMPETITOR VJCB38 Beaded J-Channel- 3/8" Nominal .040" Thick Length: 12' 6" Available in white, ivory, beige, sand, autumn tan, pewter, and khaki Without GELOY resin With GELOY resin 11/2" 3/4" VJC58 All Purpose J-Channel - 5/8" Nominal .040" Thick Length: 12' 6" Available in all vinyl siding colors ®GELOY is a registered trademark of General Electric Company Longer Lasting For enhanced weatherability and resistance to fading, darker colors use quality GELOY® resins manufactured by GE Plastics. 3/4" 11/2" 8 13/8" 5/8" Autumn Tan NOTE: Colors shown are mechanically produced and may vary from actual product. Please refer to the actual product sample for true color representation. 2 3/8" Double 4" Double 5" Double 41/2" Dutch Lap EL40 Evolutions Double 4" Nominal .040" Thick Length: 12' 6" EL50 Evolutions Double 5" Nominal .040" Thick Length: 12' ELD45 Evolutions Double 41/2" Nominal .040" Thick Length: 12' 1" 3/4" VFT20 Finish Trim Nominal .056" Thick Length: 12' 6" Available in all vinyl siding colors 13/4" 5/8" VFC58 F-Channel - 5/8" Nominal .042" Thick Length: 12' 6" Available in all vinyl siding colors NOTE: Accessories are available in a variety of popular colors. 9