Bargellographix Quilt

Bargellographix Quilt
Using
FOLKLORICA
Important Note
This insert has the Materials list and Cutting instructions for making the “Bargellographix” quilt
using fabric from the Folklorica collection.
You will need a copy of Floragraphix I Quilt Designs, by Jason Yenter, for the complete instructions.
(See “Bargellographix” pages 31-35.)
Materials
Yardage requirements are based on 40" fabric width.
2 yds. Black Cat Border Stripe (2FL1) for wide
horizontal strips
½ yd. Yellow Sunflowers (7FL1) for Bargello A strips
¾ yd. Green Tonal Leaves (8FL3) for Bargello B strips
¾ yd. Orange Leaves and Flowers (6FL1) for Bargello
C strips
¾ yd. Orange Tonal Leaves (8FL1) for Bargello D strips
1⅓ yds. Orange Tonal Dots (9FL4) for Bargello E
strips and binding
¾ yd. Black/Orange Medium Floral (4FL1) for
Bargello F strips
½ yd. Blue Leaves and Flowers (6FL3) for Bargello G
strips
4⅝ yds. for backing
Finished Quilt Size: 64½" x 68½"
Finished Horizontal Strip: 64½" x 10"
Cutting
Cut strips across width of fabric, unless otherwise
instructed.
From Black Cat Border Stripe, selectively cut:
■ 4 strips, 10" x length of fabric
From Yellow Sunflowers, cut:
■ 7 strips, 1½" x 40"; these will be A strips in the
Bargello panels (Cut one of the strips into two
1½" x 20" strips.)
From Green Tonal Leaves, cut:
■ 13 strips, 1½" x 40"; these will be B strips in the
Bargello panels (Cut one of the strips into two
1½" x 20" strips.)
From Orange Leaves and Flowers, cut:
■ 13 strips, 1½" x 40"; these will be C strips in the
Bargello panels (Cut one of the strips into two
1½" x 20" strips.)
From Orange Tonal Leaves, cut:
■ 13 strips, 1½" x 40"; these will be D strips in the
Bargello panels (Cut one of the strips into two
1½" x 20" strips.)
From Orange Tonal Dots, cut:
■ 13 strips, 1½" x 40"; these will be E strips in the
Bargello panels (Cut one of the strips into two
1½" x 20" strips.)
■ 8 strips, 2½" x 40", for double-fold binding
Note: The bargello panels in this quilt design are
slightly different than the panels in the “Bargellographix”
quilt shown in the Floragraphix I Quilt Designs book.
After making the bargello slices as directed in the book,
you can either make the bargello panels as shown on
page 34, or you can play around with the fabric slices
and come up with your own bargello pattern, or you can
follow Jason’s design as shown here.
From Black/Orange Medium Floral, cut:
■ 13 strips, 1½" x 40"; these will be F strips in the
Bargello panels (Cut one of the strips into two
1½" x 20" strips.)
From Blue Leaves and Flowers, cut:
■ 7 strips, 1½" x 40"; these will be G strips in the
Bargello panels (Cut one of the strips into two
1½" x 20" strips.)