LUSTRE ORGUE 2 RANGS ORGUE CHANDELIER, 2 TIERS
Transcription
LUSTRE ORGUE 2 RANGS ORGUE CHANDELIER, 2 TIERS
LUSTRE ORGUE 2 RANGS ORGUE CHANDELIER, 2 TIERS 835 mm 32.87 in 1135 mm 44.69 in 497 mm 19.57 in DROP à communiquer Mini = 750 mm 29.53 in ORGUE CHANDELIER, 2 TIERS Weight: 116.84 pounds Size: minimum H.: 29.53 in - ø: 44.69 in Lighting: primary power supply voltage: 230 V (EU) or 120 V (US), secondary power supply voltage: 60 V dc, 119 x 1.2 W (350 mA) Use: indoor use not in toilets/bathrooms Mounting Guide LUSTRE ORGUE 2 RANGS 835 mm 32.87 in 1135 mm 44.69 in 497 mm 19.57 in DROP à communiquer Mini = 750 mm 29.53 in ORGUE CHANDELIER, 2 TIERS Minimum height: 29.53 in Diameter: 44.69 in Weight: 116.84 pounds Hauteur minimum : 750 mm Diamètre : 1135 mm Poids : 53 kg Materials and finish: Chrome-plated or gilded, hand polished clear satin crystal or gold lustred. Matériaux et finition : finition chromée ou dorée, cristal incolore satiné et repoli à la main ou cristal lustré or. Lighting: Number of leds: 119 Total maximum power = 119 X 1.2 W Primary power supply voltage: 230 V (EU) or 120 V (US) Secondary power supply voltage: 60 V dc Certified CE standard (230 V Europe) Gradable with remote control in EU version Éclairage : Nombre de leds : 119 Puissance maximale = 119 X 1.2 W Tension d’alimentation primaire : 230 V (EU) ou 120 V (US) Tension d’alimentation secondaire : 60 V cc Certifié norme CE (230 V Europe) Gradable avec télécommande en version EU All chandelier orders must include the following information: Desired height from ceiling to bottom of chandelier (overall size / DROP). Minimum DROP = 750 mm Toute commande de lustre doit être accompagnée des renseignements suivants : Hauteur souhaitée du plafond à la base du lustre (encombrement / DROP). DROP minimum = 750 mm Specification Sheet - fiche identité 1 PARTS CHECK 1 Allen key: n°. 2 1 Allen key: n°. 4 1 Allen key: n°. 5 Suspension rod (if the size is more than 1200 mm the rod will be packed in a second package) Orgue Chandelier, 2 tiers 119 crystals + 4 spare Before discarding the package, we advise you to check that the items shown here have actually been unpacked. 2 Kg 4 To keep your chandelier looking as-new and intact, when handling and using it we recommend that you wear the supplied cotton gloves. TECHNICIANS AND REQUIRED TOOLS The chandelier must be assembled/disassembled by 2 technicians and to the standards in force in the country where it is installed. 3 2 pairs of gloves Attachment to ceiling by hook. Lalique does not supply ceiling brackets. Brackets must be suitable for the support. REMARKS Lalique cannot be held liable for ceiling attachment. Indoor use Never look directly at the light source. Check that the electric network is off before installing. Do not use in bathrooms/toilets Pay attention to the weight of the chandelier. Make sure attachment is to a strong support: to a slab, a rafter (beam) or a steel bar. Do not hang from a suspended ceiling. The connection between the real ceiling and the suspended ceiling should preferably be handled by an architect. MAINTENANCE Crystal: damp chammy leather Mount: soft cloth Avoid abrasive or harsh products and sprays which can run in the interstices. IF YOU FIND A PROBLEM WITH YOUR ITEM, PLEASE CONTACT DIRECTLY YOUR LALIQUE SHOP OR RETAILER WITH YOUR TRACEABILITY REFERENCE. Mounting Guide - 2 5 ASSEMBLY INSTRUCTIONS / ORGUE CHANDELIER, 2 TIERS 5.1 Suspension rod Plug Attach the safety cable to the plug using screw A and castellated washer using the Allen key n°. 5. Connect together the 3-way plug and socket connectors. Castellated washer Screw A Vis C Allen key n°. 5 Safety cable 3-way connectors Allen key n°. 4 Plug Screw D Screw B 5.2 Attach the plug with the 3 screws B , C and D using the Allen key n°. 4. Screw C Neutral Earth 5.3 Phase Hang the chandelier by the attaching yoke. Connect the chandelier to the mains power. Connect the de-energized 3-way connector. (pay attention to the connection marks). The earth conductor must be connected. Mounting Guide - 3 Attachment not supplied. (to be adapted to support) 5 ASSEMBLY INSTRUCTIONS / ORGUE CHANDELIER, 2 TIERS 5.4 Reassemble the cover and the supporting ring. Tighten the small set screw with Allen key n°. 2. 5.5 Remove the transparent protective film from the crystals. Position the crystal metal bezels top-most. Screw the crystals into the threaded sockets of the LEDs. 5.6 After turning on the electric power, it is advisable never to look into the light source if the crystals of the chandelier are not in place. Mounting Guide - 4 6 REMOTE CONTROL FOR EU CHANDELIERS Switching on/off is by a brief press on the button. Gradation is by holding the button down. Mounting Guide - 5