defender cable ramps

DEFENDER CABLE RAMPS
Defender Cable Ramps
The defender series meets the most demanding requirements and can be found at almost every large event.
Defenders are used by other industries including construction companies and rescue services.
All DEFENDER cable crossovers are made of polyurethane. They are fire-resistant, resistant to oil, acids and
gasoline. Operating temperatures range from -40° F to +158° F. Virtually indestructible body and lid, with high
resistance to tearing.
Defender Compact
514-85100
Defender Compact
• Length: 31.7’’/80 cm Width: 17.1”/43 cm Height: 1.5”/4 cm
• 7 Cable Channels
• Weight: 7.7 lbs./3.5 kg
• Load bearing: approx. 300 lbs./135 kg (20 x 20 cm)
Cost effective cable ramp system. The arrangement of supports
molded into the bottom permits the Defender Compact to be
laid over a run of cables, supporting the weight of crossing
vehicles. Not suitable for vehicle traffic.
514-85103
1.1
Defender Compact Base
1.5
1.0
31.7
31.7
1.5
9.5
1.1
1.1
17.1
The unique defender compact base with a weight of 7.7 lbs is
attached to the Compact to form a single unit. The Compact and
Base together can withstand extreme loads from forklifts and lifting
trucks. The 5 cable channels, each with a diameter of 13/16”,
provide ample space for many applications.
Sold separately. This is a specialty item and is not stocked. Please
contact a customer service representative for order information
31.7
1.1
17.1
1.0
Defender compact base
Defender compact
Defender Midi
9.5
31.7
514-85300
Defender MIDI
• Length: 35.0’’/89 cm Width: 21.3’’/ 54 cm Height: 2.0’’/5 cm
• 5 Cable Channels
• Weight: 25 lbs./11.5 kg
• Load bearing: approx 11,000 lbs./5,000 kg (20 x 20 cm)
• Hinged lid with interlocking feature holds the lid open while
laying in cables, and closed while in use
• Quick and easy assembly saves time for setup and breakdown
This cable crossover features 5 cable channels and molded
connectors. Midi ramp and accessories are all sold separately.
514-85308
Defender MIDI End Ramp
• Each end ramp supplied with 2 connector plugs
514-85310
Defender MIDI 45 Degree Angle
• Each 45 degree angle supplied with 2 connector plugs
514-85311
514-85310
514-85308
2.0
514-85311
2.0
35.0
1.3
• Length: 5.8’’/15 cm Width: 3.3’’/8.5 cm Height: 1.5’’/4 cm
• Weight: 1.7 lbs / 0.7 kg per pair
• Inter-connect with competitive cable ramps.
• Solid as a pair, 1 left, 1 right
• Aligns cable channels between Defender Midi and other ramps
21.3
Defender Midi Adapter
800.465.6281
www.tchweb.com
Defender Cable Ramps
Defender Ultra L
514-85600
Defender Ultra L
2.9
• Length: 27.5’’/70 cm Width: 30’’/78 cm Height: 5.4’’/14 cm
• Channels: 2 + 2
• Weight: 67.3 lbs./30.5 kg
• Load bearing: approx 6 tons per typical tire footprint
(20 x 20 cm)
27.5
30.8
This cable crossover was developed in collaboration with
suppliers for major events. The key feature of this heavy-duty
crossover is the two oversized cable/hose channels for lines up
to 4’’, and for fragile connections and connector housings not
exceeding 3’’.
4.7
17.7
4.7
5.4
This is a specialty item and is not stocked. Please contact a
customer service representative for order information.
27.527.5
30.8
4.7
2.9 2.9
4.7
4.7
30.8
4.7
17.7
17.7
5.4 5.4
Defender XXL
514-85500
Defender XXL
3.1
2.3
2.4 2.4
27.4
2.4 2.4
3.4
3.1
27.5
This is a specialty item and is not stocked. Please contact a
customer service representative for order information.
27.5
27.4
2.3
27.4
2.4 2.4
2.3
2.4 2.4
3.1
27.5
5 cable channels - 3 channels are 2-3/8” diameter suitable for
most hoses as used by the fire departments. Power cables also
have optimum protection. The ramp has a load bearing capacity
of 5 tons.
2.4 2.4
3.4
2.4 2.4
3.4
• Length: 27.5’’/70 cm Width: 30’’/70 cm Height: 3.4’’/8.7 cm
• Channels: 5
• Weight: 47 lbs / 21.4 kg
• Load bearing: approx. 6 tons per typical tire footprint
(20 x 20 cm)
www.tchweb.com
800.465.6281
800.465.6281
www.tchweb.com
[email protected]
Defender III
514-85002
Defender III
• Length: 39.4’’/1,000 cm Width: 23.6’’/60 cm Height: 2.9’’/7.3 cm
• 3 Cable Channels
• Channel height: 2’’
• Channel width: 2.2’’/ 1.8’’ / 2.1’’
• Weight: 48 lbs./22 kg
• Load bearing: 11,000 lbs./5,000 kg. (20 x 20 cm)
39.4
2.9
2
2
2 2
23.6
Black polyurethane construction with textured non-slip surface and highly visible yellow polyurethane lid including three cable
channels. Lid load bearing capacity per typical tire footprint.
Crossover lengths are joined by connector plugs. Each crossover is supplied with one pair of connector plugs. New lid with
patented hinge hook (lid remains open while cables are laid) and integrated interlock teeth provide better protection from dirt and
tearing than traditional Velcro fasteners.
This is a specialty item and is not stocked. Please contact a customer service representative for order information.
39.4
DALLAS
BUFFALO
TCH
1370 William Street, Suite 4
Buffalo NY 14206 U.S.A
(716) 892-4302 Fax
TCH
10552 King William Drive
Dallas, TX 75220 U.S.A.
(972) 556-9552 Fax
2 2
23.6
TORONTO
TCH
40 Emblem Court
Toronto, ON M1S 1B1 Canada
(416) 299-3255 Fax
39.4
Copyright 2007, TCH Sales Inc., Toronto, Ontario, Canada, All rights reserved.
2.9
2
2
R1 (02/08)
Drawings and specifications are subject to change without notice
2
2
2 2
23.6
2.9