pvd inline coating systems

Transcription

pvd inline coating systems
Inline CombiCoater
Technical Details:
■
Parts to be coated: on collective carrier 600 x 600 mm
single dimensions approx. 280 x 100 x 25 mm***
■
Substrates*:
Plastic ABS and Blends as well as PC
■
Capacities:
1,0 –2,5 min each pallet
■
Lacquer **:
Primer
UV – clear coat
Top Coat UV – clear coat
■
UV-cross-linking:
Primer
approx. 800 – 1000 mJ/cm²
Top Coat approx. 800 – 1000 mJ/cm²
Options:
■ Lacquer:
Primer Top Coat
1 / 2-K ■
1 / 2-K – solvent based lacquer
1 / 2-K – solvent based lacquer
5-7 min evaporation at room temp.**
20 min with 80°C air circulation temp.**
Loading variations: Pallets flat systems
Spindle rotation systems
■ Standard variations: Pallet size***
600 x 600 x 50 mm
900 x 900 x 50 mm
Spindle size***
600 x 170 mm
900 x 170 mm
* Other substrates possible.
** Temperature and duration depending on the substrate and lacquer requirements.
*** Different sizes depending on customer preferences accomplishable.
PVD INLINE COATING SYSTEMS
Sprimag
Spritzmaschinenbau GmbH & Co. KG
Henriettenstraße 90
D-73230 Kirchheim/Teck · Germany
Tel. +49 (0) 70 21/579-0
Fax +49 (0) 70 21/579-107
www.sprimag.de
[email protected]
Sprimag, Inc.
9965 Cincinnati-Dayton Road
West Chester, OH 45069 · USA
Tel. +1 (0) 513 - 779 - 57 30
Fax +1 (0) 513 - 779 - 57 39
www.sprimag.com
[email protected]
Sprimag Brasil Ltda.
Rua Ferreira Viana No. 630/640
CEP 04761010
Capela do Socorro · São Paulo · Brazil
Tel. +55 (0) 11 - 55 25 - 61 64
Fax +55 (0) 11 - 55 25 - 61 60
www.sprimag.com.br
[email protected]
CombiCoater 600: PVD metallization equipment
PVD-Technology
Clean room technology
■ Feed transfer
■ Air circulation systems
■ Plasma treatment
■ Material access locks
■ Metallization
■ Discharge transfer
F ilmbuilding process
technology
■ UV-curing
■ Convection drier
Application technology
Pre-treatment
Automation
Process-Integration
■ CO2-Cleaning
■ Loading system
■ PVD-Inline-Systems
■ Flaming
■ Handling systems
■ Stand-alone-Systems
■ Spray guns
■ Paint supply
■ M
ixing and metering
systems
Inline CombiCoater
Technical Details:
■
Parts to be coated: on collective carrier 600 x 600 mm
single dimensions approx. 280 x 100 x 25 mm***
■
Substrates*:
Plastic ABS and Blends as well as PC
■
Capacities:
1,0 –2,5 min each pallet
■
Lacquer **:
Primer
UV – clear coat
Top Coat UV – clear coat
■
UV-cross-linking:
Primer
approx. 800 – 1000 mJ/cm²
Top Coat approx. 800 – 1000 mJ/cm²
Options:
■ Lacquer:
Primer Top Coat
1 / 2-K ■
1 / 2-K – solvent based lacquer
1 / 2-K – solvent based lacquer
5-7 min evaporation at room temp.**
20 min with 80°C air circulation temp.**
Loading variations: Pallets flat systems
Spindle rotation systems
■ Standard variations: Pallet size***
600 x 600 x 50 mm
900 x 900 x 50 mm
Spindle size***
600 x 170 mm
900 x 170 mm
* Other substrates possible.
** Temperature and duration depending on the substrate and lacquer requirements.
*** Different sizes depending on customer preferences accomplishable.
PVD INLINE COATING SYSTEMS
Sprimag
Spritzmaschinenbau GmbH & Co. KG
Henriettenstraße 90
D-73230 Kirchheim/Teck · Germany
Tel. +49 (0) 70 21/579-0
Fax +49 (0) 70 21/579-107
www.sprimag.de
[email protected]
Sprimag, Inc.
9965 Cincinnati-Dayton Road
West Chester, OH 45069 · USA
Tel. +1 (0) 513 - 779 - 57 30
Fax +1 (0) 513 - 779 - 57 39
www.sprimag.com
[email protected]
Sprimag Brasil Ltda.
Rua Ferreira Viana No. 630/640
CEP 04761010
Capela do Socorro · São Paulo · Brazil
Tel. +55 (0) 11 - 55 25 - 61 64
Fax +55 (0) 11 - 55 25 - 61 60
www.sprimag.com.br
[email protected]

Similar documents