spring summer 2013.pub
Transcription
spring summer 2013.pub
SPRING / SUMMER 2013 THE INTEGRATED WELL LIFECYCLE SOLUTION WellView and Rushmore Reviews What is the Rushmore Reviews? The Rushmore Reviews is a UK-based organization which manages a databank of well data for benchmarking of drilling, completions, interventions and well abandonment performance worldwide. Oil and gas companies submit well data on a quarterly basis, and participating operators access the data to compare their performance against their peers. Operators can participate in various Reviews, including Drilling (DPR), Completion (CPR), Abandonment (APR), Shale (SPR), and Intervention (IPR). For more information on the Rushmore Reviews, see www.rushmorereviews.com. These Reviews have traditionally been completed manually by the responsible engineer using a predefined MS Excel template supplied by Rushmore. This manual process can be time-consuming, and engineers may not consistently interpret data over multiple wells. How Can WellView Help? As a significant percentage of the data required for the Reviews has a placeholder in the WellView data model, the normal daily reporting workflow can be used to enter relevant data into WellView. A WellView 9.0 Multi Excel template (XLT) can be configured to mirror the Rushmore Review template, allowing the user to automatically populate the template with the relevant data directly from WellView. Generic and Custom XLTs Peloton provides generic DPR and SPR templates which automatically populate approximately 50% of the respective Review from the WellView data. However, 75% of the Review and more can be achieved if the logic is customized to interpret operator-specific activity codes. Clients can either build their own custom logic or request Peloton to assist. For further information, contact [email protected]. © Peloton Computer Enterprises Ltd. All rights reserved. WellView, SiteView, RigView, ProdView and MasterView are registered trademarks of Peloton Computer Enterprises Ltd. All other trademarks and registered trademarks are owned by their respective companies. Highlights Inside Spring / Summer 2013 ReView: Page 2……Management of Change Workflow in SiteView Page 3……Technical Tips: Multiple SyncHosts Page 3……3rd Party Plant Estimator for ProdView Page 4……Google Earth Add-in Page 4……Subscribe to Peloton Product News Today! Page 1 Management of Change Workflow in SiteView The Management of Change (MOC) process is an approval workflow to define and approve a scope for certain field operations. It is most commonly part of Facility Operations, once a well site or facility is ready for production or is producing. The process can include any work of a certain type that needs to occur in the field, such as the following: Installation or maintenance of equipment Material transfer of equipment Certain required environmental, health, and safety activities in the field Design implementations or changes SiteView provides several ways to manage this workflow. The first way uses the svApproval model, with a svJob record describing the work to be completed. The svJob record lists the scope of the work and allows you to record completed activities of the approved MOC item. In svApproval, you link to the Job record and list the people who are required to sign off, or approve, the MOC (svApprovalName). You can list the MOC deliverables or items of note (such as required drawings or safety meetings) in the svApprovalDeliv table. The reviewers can evaluate and modify the list of deliverables until the items are ultimately approved. One other way is to list the type of MOC in the svApproval table and follow a more detailed workflow as the MOC winds its way through the sequential approval process. You can supplement the MOC with links to the approved drawings and engineering spec sheets, which can be included as attachments that define the work to be completed. In this case, a svJob record may or may not be required to complete the work; this method is more focused on the approval workflow process, with the scope detail listed in the attached supporting documentation that the field user uses to complete the approved MOC item. These workflows are typically notification-based. The notifications come from a combination of batch reports and custom MasterView alerts. Batch reports work well for sending out standard reports at a given time, for example, a weekly list of outstanding approvals. You can use custom alerts for tasks such as automatically incrementing the custom MOC number, adding more complex logic to direct emails based on status changes, and sending out reports or emails at specific times and under specific conditions. Page 2 Technical Tips: Multiple SyncHosts When a remote user synchronizes data to head office, they are put into a Sync queue. If many remote users are synchronizing at the same time, this queue can be quite long and generate longer than expected wait times. In AppFrame 4 products, Peloton has introduced a new feature to make this process more efficient. You can set up multiple SyncHosts to point to a single synchronization folder. When a remote user initiates the Sync process, the process is placed in the shortest queue. This method results in shorter queues—therefore, less time to synchronize! Note: To ensure performance, you should limit one SyncHost to one server. 3rd Party Plant Estimator Add-in for ProdView Have you ever wanted a tool to help you estimate liquid volumes and gas sales when you deliver your gas to a 3rd party plant? With ProdView, you can configure your flow network to obtain an estimate of gas and liquid volumes extracted at a 3rd party plant from the producer’s gas delivery. Using the gas volume and composition delivered to the 3rd party plant, the estimator process calculates product volumes extracted at the plant to individual components which can then be recombined back to defined product types. With the ProdView 3rd Party Plant Estimator Add-in, you can do the following: Estimate the volumes of gas and liquid products sent to the 3rd party plant Allocate 3rd party plant volumes to the individual wells Eliminate the need for product shrinkage and yield factors for all wells Compensate for a plant’s gas shrinkage and liquid recovery efficiencies per product For more information on setting up 3rd party plant allocations, contact your Peloton representative. Page 3 Google Earth Add-in Peloton applications include an add-in that exports geo-spatial data and allows you to visualize this data in Google Earth. You can use Google Earth’s satellite imagery to display WellView, SiteView, and RigView locations. To launch the map, select one or more wells, sites, or rigs, and choose Google Maps from the Add-ins menu in the Explorer window. The Peloton application passes latitude and longitude data to a KML file that is read by Google Earth. By default, Peloton uses the free Google Earth. You could configure the add-in to run with other mapping systems that use KML files, such as ESRI ArcGIS. For RigView, Google Earth shows the well spots, which use the job block fill colors from your current RigView template. A line links the rigs to indicate the next rig moves. If more than one rig is selected in RigView, the connecting lines appear in a different color. Click a well spot to see more details about the rig and job. Settings in the RigView INI file determine the data that is sent to Google Earth. Google map showing RigView data The WellView add-in passes out surface location details. The SiteView add-in passes out lease location details. The Google Earth add-in is currently available in WellView. In spring 2013, it will be available in the RigView and SiteView maintenance releases. Subscribe to Peloton Product News Today! Product News is available for all users of the Peloton Premium Support site. This tool allows Peloton product managers to communicate with you more frequently. We are using this forum to announce maintenance releases, and to share tips and tricks, best practices, and FAQs. If you would like to receive an email notification each time a new item is posted, please select the ‘subscribe’ option in the ‘My Account’ section within Peloton’s Premium Support site. The subscribe option is available for each product. We encourage you to subscribe today, to stay informed of exciting developments with Peloton products! Help desk 1.888.PELOTON Aberdeen +44.1224.560.580 ● Amsterdam +31.20.7470.106 ● Beijing +86.10.84785338 ● Brisbane +62.8111.39540 ● Calgary 1.403.263.2915 Dubai +971 (0) 4433.5430 ● Houston 1.281.394.2151 ● Jakarta +62.21.570.3188 ● Kuala Lumpur +60.12.387.2647 ● Moscow +7.495.411.9606 www.peloton.com ● [email protected] ● [email protected] ● [email protected] Page 4