KLEMM DRILL RIG 709-1 Serial #24206 - BAUER

KLEMM DRILL RIG 709-1 Serial #24206 - BAUER

KLEMM DRILL RIG 709‐1
Serial #24206
PREVIOUSLY OWNED
KLEMM DRILL RIG 709‐1
Klemm Drill Rig 709‐1
•
•
•
•
Serial # M24206
Built 2005
Operating Hours: 2990 Well maintained
ENGINE
• CAT Diesel Engine 3056 E ATAAC; full inspection performed by Caterpillar technician
• Certified COM2/EPA Tier 2
• Air Cooled
• Rated Output @ 2300 rpm:
129 kW/176 hp
• Fuel Tank capacity:
240 l (64 gl.)
Hydraulic System
• Hydraulic Pumps
1st Circuit: 115 l/min (30 gal/min)
2nd Circuit: 115 l/min (30 gal/min)
3rd Circuit: 35 l/min (9.25 gal/min)
4th Circuit: 12 l/min (3 gal/min)
Operating Pressure 250 bar
Hydraulic Oil Tank Capacity 600 l (160 gal)
Hydraulic Rotary Head
• Rotary Head System
– KH 43
• Max. Torque: 43.2 kNm
• Max. Revolutions: 176 rpm
• Hollow Shaft: ø 150 mm (6 in.)
Drill Mast
• Drill Mast Type: 203/10 WITH 2 SPEED FEED MOTOR
• Max. Torque: 30 kNm
• Feed/Retraction Force: 100 kN • Feed/Retraction Rate: 6.3/12.5 m/min (21/41 ft./min)
• Fast Feed/Retraction Rate: 20.5/41 m/min
(67 ft./135 ft./min)
Drill Mast Extension 202/10
• Kinematical Mast Adjustments: ± 15°
• Mast Extension:
– 3400 mm (11 ft.)
– Total feed length; 6400 mm (21 ft.)
– Overall Length: 8800 mm (29 ft.)
Crawler Base
•
•
•
•
•
•
•
•
Crawler Type: B1
Crawler Speed: 2.5 km/hr. (1.4 m/hr.)
Ground Pressure: 4.7 N/cm²
Towing Force:
100 kN
Overall Width: 2400 mm (7 ft., 10 in.)
3‐web Track Shoes: 500 mm (1 ft., 8 in)
Length: 3350 mm (11 ft.)
Ground Clearance: 320 mm (1 ft.)
Winch
• New winch rope; Ø8 x 25,000 mm (5/16 in x 82 ft)
• 10 kN pull force
Water Pump
• Gamma 202 Water Pump:
– 130 l/m @ 30 bar
Machine Dimensions
•
•
•
•
Total Weight: 13 m tons (29,000 lbs.)
Width: 2400 mm (8 ft.)
Length: 8800 mm (17 ft.)
Height: 3050 mm (10 ft.)
KR 709‐1 M24206
KR 709‐1 M24206