Amarok - Rhino4x4

Volkswagen Amarok
Thank you for your enquiry.
Our Rhino 4x4 Evolution Bars are built tough using 3 and 5mm steel construction and offer
the same protection as traditional style bull bars to all
engine vitals. They have been thoroughly tested to
comply with the Australian Standards and are airbag
compatible.
You may choose to install the bar yourself or get one of
our Accredited Rhino 4x4 Dealers to install the bar for
you.
All prices below are current as of May 2016 and are
inclusive of GST.
Standard Amarok Evolution Front Bar:
-
Fully winch compatible. No other parts required.
Comes standard in a flat textured black powder
coat
Includes a 5mm alloy bash plate as standard
Includes LED fog lights as standard
Includes 2 snatch rated recovery points as
standard
COST: $2,650 .00
Additional Amarok Evolution Front Bar Options:
-
Our standard features are usually
options you have to pay extra for
with other brands.
Colour coding to match vehicle $270
Parking sensor compatibility free. Must be notified at time of order
Light mounting bar in black or colour coded ($130) or in chrome ($180)
Chrome winch cover (mid-section under front grill) $150 (Standard is same colour as
the bar)
Installation by a Rhino 4x4 Australia Accredited Dealer $400 (install price includes
standard bar install and connection of fog lights to existing fog light wiring. Winch
install, fog light wiring where there was no existing fog lights and parking sensor
install will be charged at an hourly rate)
1300 885 841
[email protected]
1|Page
-
12000lbs Rhino Winch with synthetic Dynema rope and wired & wireless remote
$849
Additional Rhino 4x4 Products:

Underbody Protection – $1250
o 5mm alloy formed for strength
- Rear Diff Protection Kit
- Engine-transmission Protection
Kit
- Fuel Tank Protection Kit

Steel Rock Sliders
- Powder Coated Black $950

Rear Bar
- Includes 3000kg tow hitch. We
will need to know if you have reverse sensors when you order to ensure you
get the correct bar.
- Standard Black $1650
- Chrome $2010
- Colour coded rear bar $1920
- Wiring Harness Kit $210
1300 885 841
[email protected]
2|Page
-
Suspension kit – $1620
This high quality suspension kit includes German engineered and manufactured
Bilstein shocks and struts. And Kings springs to provide superior ride quality and
durability. This kit is designed to provide you with about 2” of lift and also get rid of
that nose down look most new 4WD’s have as standard. Just let us know at time of
order if you have a bull bar and or winch installed so that we select the correct
springs. Pricing also includes delivery to your door Metro only.
- 2 Front Bilstein struts
- 2 Rear Bilstein shocks
- 2 Kings coils extra raised
- 2 2” rear block lift kits.
Shipping:
If you chose to install the bar yourself we can ship directly to a
nominated address. Please provide the postcode that you
require the bar to be shipped to and we will provide you with
shipping cost.
NOTE – If your vehicle has no wheel flares you need to inform us at
time of order so that we select the correct part
NOTE – If your vehicle has front or rear parking sensors you need to
inform us at time of order so that we select the correct part
To order your Amarok Evolution Bar just confirm via reply email or call 1300 885 841.
We will take all required details and email you an invoice confirming your order.
1300 885 841
[email protected]
3|Page
1300 885 841
[email protected]
4|Page
1300 885 841
[email protected]
5|Page
1300 885 841
[email protected]
6|Page
1300 885 841
[email protected]
7|Page
1300 885 841
[email protected]
8|Page
1300 885 841
[email protected]
9|Page