IWAKI Air Pumps APN series

IWAKI
AIR
PUMPS
APN
Most appropriate for built-in applications
Diaphragm air pumps
The APN series, diaphragm air pumps, are compact and have motor-driven diaphragms.
A highly-efficient motor and a special diaphragm, an enlarged bearing and an enhanced connecting rod have greatly improved
vacuum performance, a starting characteristic and durability.
The APN can fit to various applications, including gas sampling and medical equipment.
Clean air transfer
Long life design
Wide variations
The motor-driven diaphragm pumps are
oil-/carbon-free and are highly air-tight.
Most suitable in medical or sampling
equipment where air cleanness is required.
Fiber reinforced diaphragms, enlarged
bearings and enhanced con rods have
further improved reliability and durability in order for the pump to run over an
extended time period in a continuous
operation.
Either single- or twin-head type is selectable. Also, EPDM, FKM, NBR or PTFE
diaphragm and hose/thread connections
are available. A number of combinations
(more than 60) varies the APN according
to an intended use.
Highly-efficient design
A use of moulded parts enhances the
pump performance and efficiency. The
high-power motor also improves the
starting characteristic.
NOTE: A diaphragm material and a suction bore shape differs
with models.
Easy maintenance
The pump head consists of only a few
parts and can easily be dismantled and
assembled.
Applications
1
Analysers
Medical equipment
Deaerator, Air analyser, Flue-gas analyser,
Biochemical analyser, Spectral photometer,
Leak tester and Dust counter.
Aspirator, Nebulizer, Low-frequency therapy equipment, Blood-pressure gauge,
Endoscope, X-ray film adsorption/transfer,
Gas sterilizer, Tapper, Artificial respirator,
Bedsore preventive mat, Interferential current therapy equipment, Oxygen generator and Normal saline solution spray.
Printing and Automatic processing
Electronics
Copy machine (paper transfer), Printing machine (film
adsorption/ paper transfer), Automatic processor
(blower), Printer, Air bearing and Automatic stamper.
PCB adsorption/transfer, Clean bench, Wafer adsorption/transfer, Semiconductor manufacturing
equipment, Laser equipment and Micro air duster.
IWAKI AIR PUMPS
APN
Either single or twin pump head type is selectable.
Thread and hose connections allow the pump to fit into various applications.
Max.Vacuum
26.66
26.66
53.32
53.32
kPa
79.98
79.98
Max. discharge pressure
101.31 0
101.31 0
0.05
0.05
0.1
0.1
0.15
0.15
MPa
Model
APN-051L/H
Single
APN-P051L/H
Parallel
APN-S051L
Series
APN-052L/H
Single
APN-P052L/H
Parallel
APN-S052L/H
Series
APN-052L/H-D
Single
APN-085
Single
APN-085L/H
Single
APN-085L/H-D4
Single
APN-P085L/H
Parallel
APN-S085L/H
Series
APN-110K/L
Single
0.2
APN-110K/L-D4
APN-P110K/L
Max.capacity
Pump head
0.2
L/min (50Hz)
0
2.5
5
7.5
10
0
25
50
75
100
Single
Parallel
APN-S110L
Series
APN-215N
Single
APN-215C
Single
APN-215M
Single
APN-P215N
Parallel
APN-P215C
Parallel
APN-P215M
Parallel
APN-S215M
Series
APN-240N
Single
APN-240M
Single
APN-P240N
Parallel
APN-P240M
Parallel
APN-S240M
Series
APN-450N
Single
APN-P450N
Parallel
APN-S450N
Series
Physics and chemistry
Industrial machine
Vacuum furnace, Aspirator, Vacuum filtration, Liquid chromatography, Particle counter, Leak tester,
Spray, Turbidimeter, Culture apparatus, Aseptic
bath, Micro air duster and Agitator
Forming machine (vacuum defoaming), Solder
adsorption, Washer, Vacuum tweezer, Automatic
packaging, Automobile oil charger, Ozonizer,
Vacuum chuck, Glass engraver, Solvent recovery,
Lifter, Air tool, Air brush and air duster.
Food industry and Automatic dispenser
Aquarium fish and Live fish
Food pack (vacuum packaging), Automatic dispenser, Thawing machine, Labelling machine,
Bubbling machine and Deaerator
Blower, Ozonizer, Air lift and Underwater camera
2
Pump variations
Single head type
051L
052L-D
085
215C
085HX
110K
215M
240NA
450NA
Twin parallel heads type
P085L
P110L
P215C
P240
P450NS
Twin series heads type
S085L
S110L
S215M
S240
S450NS
Pump identification
APN - S 110 K N X - 1 - 02
Special specification
Pump head
No code : Single head
S : Dual-head with series tubing
P : Dual-head with parallel tubing
Power voltage
Model
110
Inlet/outlet
K : Parallel type
L : In-line type
Diaphragm/Valve materials
E : EPDM
V : FKM
This identification is APN-110 type.
Please inform us of other types.
3
Pump connection
No code : Ø8 tube connection
X : Rc1/4 female thread connection
X1 : G1/4 female thread connection
1 : 100VAC
2 : 200VAC
3 : 115VAC
4 : 220/240VAC
D1 : 12VDC
D2 : 24VDC
D3 : Brushless 24VDC
(Uncontrollable)
D4 : Brushless 24VDC
(Controllable)
IWAKI AIR PUMPS
APN
Pump application guide
Available
Pumphead
Compressor
Model
Vacuum
Single
Parallel
Series
Hose
Parallel
Available
Not Available
Connection
Hose
Thread
Vertical
Parallel
Hose
Straight
Thread
Straight
Thread
Vertical
APN-051L
APN-051H
APN-051H5
APN-052L
APN-052H
APN-052H5
APN-085
APN-085L
APN-085H
APN-085 (Brushless type)
APN-085L (Brushless type)
APN-085H (Brushless type)
APN-110K
APN-110L
APN-110K (Brushless type)
APN-110L (Brushless type)
APN-215N
APN-215C
APN-215M
APN-240NA
APN-240MA
APN-450NA
APN-450NS
Specifications
AC115V(60Hz)/AC220•240V(50Hz)
Max.capacity
L/min
Model
AC 115V
AC 220 · 240V
APN-051L/H/H5
0.7
0.6
APN-P051L/H/H5
1.4
1.2
APN-S051L
1.8
1.5
APN-052L/H/H5
2.1
1.8
APN-P052L/H/H5
4.2
3.6
APN-S052L
3.6
3.0
APN-051L-D3
—
—
APN-052L/H-D1
APN-052L/H-D2
APN-085
APN-085L/H
APN-085L/H-D4
APN-P085L/H
APN-S085L
APN-110K
APN-110L
DC
—
—
1.0
—
—
1.8
6.0
5.0
—
—
—
12
10
6.0
5.0
14
12
APN-110K/L-D4
APN-P110L
—
28
—
24
APN-S110L
14
12
18
15
6.0
—
—
14
—
APN-215N
APN-215C
APN-215M
APN-P215N
APN-P215C
APN-P215M
32
28
36
30
—
Max.discharge
pressure
Max.vacuum
Connection size
MPa
kPa
Hose Screw
0.05
61.32
—
13.33
0.05
61.32
—
13.33
ø8
—
0.05
61.32
ø8
—
0.05
61.32
0.08
—
—
ø8, ø5 Rc1/8
ø8, ø5 —
34.66
ø8
Rc1/4
G1/4
7.99
0.1
0.05
0.1
23.99
—
7.99
0.1
39.99
0.2
—
—
26.66
0.1
39.99
—
ø8
ø9
Rc1/4
G1/4
—
18
15
APN-240NAN
34
30
0.2
41.32
APN-240MAN
36
32
—
21.33
APN-P240NAN
68
60
0.2
41.32
APN-P240MAN
72
64
—
21.33
APN-S240MANX
36
32
—
6.67
APN-450NA/S
60
50
APN-P450NA/S
110
100
0.1
13.33
APN-S450NA/S
60
50
—
3.33
Mass
Current A
AC 115V
AC 220 · 240V
DC
AC 115V
AC 220 · 240V
DC
kg
15
14
—
0.15
0.14
—
0.5
20
18
—
0.2
0.18
—
0.85
15
15
—
0.15
0.15
—
0.5
36
30
—
0.36
0.3
—
0.85
—
—
0.8(DC24V)
—
—
0.25(DC24V)
0.5
—
—
4.8(DC12V)
—
—
1.25(DC12V)
—
—
4.9(DC24V)
—
—
0.63(DC24V)
25
29
—
0.15
0.11
—
1.9
—
—
15
—
—
1.2
1.3
38
38
—
0.3
0.15
—
2.6
—
48
—
—
0.23
—
2.5
—
0.5
—
15
—
—
1.4
1.5
—
68
—
—
0.33
—
3.8
64
64
—
0.56
0.3
—
3.5
95
95
—
0.93
0.5
—
5.2
60
60
—
2.1
1.2
—
7.0
90
90
—
3.2
1.9
—
10.0
345
312(220V)
308(240V)
—
3.1
1.5 • 1.4
—
G1/8
26.66
APN-S215M
—
ø8
61.32
0.2
—
ø8, ø5 Rc1/8
Motor
Input W
7.99
ø14 G1/4
—
Rc1/4
ø12 Rc1/4
A12.0 S14.2
A12.8 S17.1
A13.0 S17.4
•Air flow temperature : 0-40°C •Ambient temperature : 5-40°C
4
Construction
051L/052L
110K
3
240NA
4
1
1
6
1
3
2
4
2
3
5
4
6
5
2
5
6
085,085L
215N/215M,215C
3
1
8
1
7
3
450NA
4
2
2
6
1
5
6
4
1
APN-085
3
5
1
APN-215N / 215M
3
2
4
5
4
2
2
6
6
5
3
APN-085L
7
APN-215C
List of Available Materials
Symbol of Material
Name
GFRPP
GFRPPS
GFRPA
PTFE
FKM
Glass-fiber-reinforced polypropylene
Glass-fiber-reinforced polyphenylene sulfide resin
Glass-fiber-reinforced polyamide resin
Tetra-fluoroethylene resin
Fluorocarbon rubber
EPDM
NBR
ADC12
SUS304
SUS631-CSP
Ethylene propylene rubber
Nitrile butadiene rubber
Aluminum diecast
Stainless steel 304
Stainless steel (strip steel for spring)
Materials
Model
Material code
1
2
3
4
5
6
7
8
5
Pump head
Diaphragm
Valve
051L,052L
V
E
085,085L
V
GFRPP
E
110K
N
V
GFRPP
215N
E
GFRPP
V
215C
E
GFRPA
V
ADC12
240
E
GFRPP
ADC12
450
AT
ST
ADC12
SUS304
EPDM
FKM
EPDM
NBR
FKM
EPDM
FKM
EPDM
FKM
EPDM
FKM
EPDM
NBR
PTFE+EPDM
FKM
EPDM
FKM
EPDM
NBR
FKM
EPDM
FKM
EPDM
FKM
EPDM
FKM
EPDM
FKM
SUS631-CSP
GFRPP
GFRPP
GFRPP
GFRPPS
Retainaer plate
GFRPPS
GFRPPS
GFRPPS
GFRPPS
Screw
SUS304
SUS304
SUS304
Pump head cover
V
PTFE+
EPDM
Valve seat
Seal gasket
215M
E
SUS304
FKM
EPDM
SUS304
SUS304
ADC12
ADC12
SUS304
FKM
EPDM
GFRPP
SUS304
ADC12
SUS304
SUS304
EPDM
FKM
IWAKI AIR PUMPS
APN
Performance curves
085/085L,085L/H-D4
P052
051
052
051-D3
P051
0
101.31
110K,110K/L-D4
0.08
50Hz
0.04
P085L/H
085L/H
085
085L/H-D3
0
101.31
Discharge pressure MPa
Discharge pressure MPa
50Hz
052-D1/D2
Discharge pressure MPa
051L/052L,051/052DC
0.05
0.1
50Hz
110
P110
0.05
110K/L-D3
0
101.31
S051
47.99
74.65
47.99
S085L/H
21.33
21.33
1.0
2.0
3.0
4.0
4
6
60Hz
052
P052
P051
Discharge pressure MPa
Discharge pressure MPa
8
10
12
10
0.08
60Hz
P085L/H
0.04
085L/H
085
0
101.31
60Hz
0.1
110
P110
0
101.31
47.99
S085L/H
21.33
21.33
2.0
3.0
8.00
2
4.0
4
6
215N/215M,215C
P215N
P215M
50Hz
P240N
0.1
240N
20
30
240M
10
30
Discharge pressure MPa
215C
P215M
20
60Hz
0.1
240N
Air flow L/min
30
60
80
100
0.1
60Hz
450
P450
0
101.31
74.65
74.65
P240M
47.99
8.00
20
40
Air flow L/min
P240N
21.33
S215M
10
S450
47.99
70
0
101.31
21.33
8.00
60
P215N
215M
47.99
50
Vacuum kPa
74.65
40
0.2
Vacuum kPa
Discharge pressure MPa
Vacuum kPa
60Hz
P215C
0
101.31
0
101.31
Air flow L/min
0.2
215N
450
8.00
20
Air flow L/min
0.1
50Hz
P450
21.33
S240M
Discharge pressure MPa
10
P240M
47.99
8.00
0.1
74.65
74.65
21.33
S215M
30
450NA
Vacuum kPa
Vacuum kPa
Vacuum kPa
215M
21.33
8.00
20
Air flow L/min
0
101.31
47.99
10
Discharge pressure MPa
P215C
0
101.31
74.65
12
0.2
Discharge pressure MPa
Discharge pressure MPa
50Hz
215N
10
240NA
0.2
215C
8
Air flow L/min
Air flow L/min
0.1
47.99
21.33
8.00
1.0
S110
74.65
Vacuum kPa
Vacuum kPa
Vacuum kPa
S052
S051
30
Air flow L/min
74.65
74.65
47.99
20
Air flow L/min
0.05
051
S110
8.00
2
Air flow L/min
0
101.31
47.99
21.33
8.00
Discharge pressure MPa
Vacuum kPa
S052
Vacuum kPa
Vacuum kPa
74.65
74.65
240M
47.99
21.33
S240M
10
S450
8.00
20
30
40
Air flow L/min
50
60
70
20
40
60
80
100
Air flow L/min
6
IWAKI AIR PUMPS
APN
Dimensions in mm
a
c
d
Model
c
a
f
H
a
c
b
—
13
e
d
c
d
e
32 (80)* 6.5
c
a
Model
f
67
—
* Motor D1/D2: (77)mm, Motor D3: (76)mm
4 - ø4.5
d
4-5.5X23
b
13
—
—
b
W
e f
L
d
4-5.5X23
Model
c d
e
f
—
32 (135) 6.5 67
67
4-5.5
2-5.5
2-5.5
W H L
a
46 (78) (162)
78 (75) (162) 46
46 (75) (202)
APN-P051L/P052L
APN-P051H/P052H
APN-S051L/S052L
a
APN-S085L
W
H
L
a
b
APN-085
(136)
APN-085L
82.4 (121) (124)
72
APN-085H
(140)
(121)
APN-085L-D4
(80)
(130)
(140)
APN-085H-D4
APN-110
L
66
b
W
e f
c
24
—
24
—
d
e
21.5
57
23
24
f
H
H
2 - ø4.5
W H
L a
86 (75)
(94) 46
46 (78)
APN-051L/052L
APN-051H/052H
e
a
c
APN-085H
H
e
APN-P085H
H
APN-085H-D3
g
a
H
W
b
APN-085L-D3
H
W
b
g
APN-P051H/P052H
L
a
APN-085L
f
H
APN-051H/052H
L
a
H
f
H
W
f
H
APN-P051L/P052L
L
APN-P085L
H
APN-085
W
APN-051L/052L
a
c
APN-085
W
H
APN-S051L/S052L
L
APN-052
d
e
L
4-5.5X23
f
g
—
111
18.5 —
111
Model
W
APN-P085L
APN-P085H
APN-S085L
H
b
W
L
a
(121)
106
82.4 (140) (188)
72
(121)
b
c
—
66
24
d
111
—
—
W
b
L
W
b
L
W
b
APN-P215N
L
W
b
L
W
b
L
W
b
d
c
a
e
d
W
a
b
APN-110K
APN-110L
APN-110K-D4
APN-110L-D4
(152)
(164)
78 (134)
86
(129)
(141)
24
—
24
—
c
74
d
91
e
f
24 124
APN-240
L
a
b
c
d
e
4-ø6.5
c
a
b
e
Model
Model
W
APN-S110L
APN-P110L
78
(236)
(134)
86 (104) 74 (154) 24 (124)
102
(212)
f
W
APN-215N
APN-215C
APN-215M
H
L
a
b
(147)
Ø96 (140) (195) 90
(151)
50
39
50
c
74
d
e
91
(125)
36 (130)
(125)
112
a
c
APN-450NA
54
112
4-ø6
f
f
H
4-ø6.5
Model
W
APN-P215N
APN-P215C
APN-P / S215M
APN-P450NA
a
b
c
(147)
Ø96 (140) (282) 110
(151)
H
L
50
39
50
d
e
(125)
78 (90) — (130)
(125)
f
APN-S450NA
54
4-ø6
e
H
L
H
c
a
e
d
APN-450
APN-P240NAN
APN-P240MAN
304
90
a
c
APN-S240MANX
304
APN-240NAN
APN-240MAN
L
H
f
H
f
H
d
4-ø6.5
c
a
APN-P / S215M
304
L
4-ø6.5
Model
APN-215M
f
H
c
a
H
W
H
APN-S110L
W
L
APN-P215C
90
e
d
L
APN-215C
f
APN-110L-D3
W
f
H
4-ø6.5
W
f
H
f
H
L
L
f
APN-P110L
W
b
L
f
H
f
H
L
f
H
APN-110K-D3
W
b
L
APN-110L
111
—
APN-215
APN-215N
APN-110K
f
e
108 151
2-Rc1/4
f
H
f
b
4-ø6
d
112
b
W
42
112
4-ø6
227
42
L
a
b
c
d
e
f
140 (186) (219) 122 125 48 135 (26) (173)
APN-P240NAN
APN-P240MAN
APN-S240MANX
W
H
L
a
b
c
d
e
140 (186) (297) 122 125 48 (245) (173)
f
—
(30)
205
241
220
292
141
286
141
AF - 2 V - 1 C
1
Filter and Muffler
To be used as muffler when installed at
discharge side and also as filter when
installed at suction side. (Check valve
incorporated filter is available as option)
6-6 Kanda-Sudacho 2-chome Chiyoda-ku Tokyo 101-8558 Japan
TEL : (81)3 3254 2935 FAX : 3 3252 8892
: IWAKI Europe GmbH
: IWAKI Europe GmbH
: IWAKI Europe GmbH (Netherlands Branch)
: IWAKI Europe GmbH (Italy Branch)
: IWAKI Europe GmbH (Spain Branch)
: IWAKI Belgium N.V.
: IWAKI Nordic A/S
: IWAKI Suomi Oy
: IWAKI France S.A.
: IWAKI Norge AS
: IWAKI Sverige AB
: IWAKI Pumps (UK) Ltd.
TEL: (49)2154 9254 0
TEL: (49)2154 9254 50
TEL: (31)74 2420011
TEL: (39)0444 371115
TEL: (34)93 37 70 198
TEL: (32)13 67 02 00
TEL: (45)48 24 2345
TEL: (358)9 2745810
TEL: (33)1 69 63 33 70
TEL: (47)23 38 49 00
TEL: (46)8 511 72900
TEL: (44)1743 231363
Caution for safety use:
Before use of pump, read instruction manual carefully to use the product correctly.
3
V : FKM E : EPDM
N : CR/NBR(Gasket, O ring, Check valve)
2. Connection
1 : G1/8(For type 215)
2 : G1/4(For type 085 and 110)
C : With Check valve
IWAKI has global net work.
Please find your distributor location at
( )Country codes
FAX: 2154 9254 48
FAX: 2154 9254 55
FAX: (49)2154 925448
FAX: 0444 335350
FAX: 93 47 40 991
FAX: 13 67 20 30
FAX: 48 24 2346
FAX: 9 2742715
FAX: 1 64 49 92 73
FAX: 23 38 49 01
FAX: 8 511 72922
FAX: 1743 366507
2
1. Materials
3. Option
Legal attention related to export.
220
141
Optional accessory
European office
Germany
Holland
Italy
Spain
Belgium
Denmark
Finland
France
Norway
Sweden
U.K.
83
H
304
304
W
APN-240NAN
APN-240MAN
83
Model
Model
141
APN-S450NS
4-ø6
90
W
141
APN-P450NS
83
e
227
90
d
141
APN-450NS
304
H
e
4-ø6
209
U.S.A.
Argentina
Singapore
Indonesia
Malaysia
Australia
Hong Kong
China
Korea
Taiwan
Thailand
Vietnam
: IWAKI America Inc.
: IWAKI America Inc. (Argentina Branch)
: IWAKI Singapore Pte Ltd.
: IWAKI Singapore (Indonesia Branch)
: IWAKIm Sdn. Bhd.
: IWAKI Pumps Australia Pty Ltd.
: IWAKI Pumps Co., Ltd.
: GFTZ IWAKI Engineering & Trading Co., Ltd.
: IWAKI Pumps (Shanghai) Co., Ltd.
: IWAKI Korea Co.,Ltd.
: IWAKI Pumps Taiwan Co., Ltd.
: IWAKI (Thailand) Co.,Ltd.
: IWAKI Pumps Vietnam Co., Ltd.
w w w. i wak i p ump s.j p
TEL: (1)508 429 1440
TEL: (54)11 4745 4116
TEL: (65)6316 2028
TEL: (62)21 6906606
TEL: (60)3 7803 8807
TEL: (61)2 9899 2411
TEL: (852)2607 1168
TEL: (86)20 84350603
TEL: (86)21 6272 7502
TEL: (82)2 2630 4800
TEL: (886)2 8227 6900
TEL: (66)2 322 2471
TEL: (84)613 933456
FAX: 508 429 1386
FAX: 6316 3221
FAX: 21 6906612
FAX: 3 7803 4800
FAX: 2 9899 2421
FAX: 2607 1000
FAX: 20 84359181
FAX: 21 6272 6929
FAX: 2 2630 4801
FAX: 2 8227 6818
FAX: 2 322 2477
FAX: 613 933399
Actual pumps may differ from the photos.
Specifications and dimensions are subject to change without prior notice.
For further details please contact us.
Our products and/or parts of products fall in the category of goods contained in control list of international regime for export control.
Please be reminded that export license could be required when products are exported due to export control regulations of countries.
The posting and copying from this catalogue without permission is not accepted firmly.
CAT-W 0070-07
2014.06.PDF