Moduline - SunProject

Transcription

Moduline - SunProject
MODULINE® LITE-LIFT
TM
system
Moduline
5 BRACKETS,
FABRIC EDGE CLEARANCE
Lite-Lift
®
85/105 Brackets, Fabric edge clearance
MODULINE® LITE-LIFT
85/105 BRACKETS, FABRIC EDGE CLEARANCE
system
TM
Moduline® Lite-Lift®
Single
16
All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
Moduline® Lite-Lift®
Multibanded (Tandem)
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs,
plans, installation and specifications. Contact SunProject for project specific engineering drawings. All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
1
Moduline
MODULINE® 85 LITE-LIFT
TM
85 Lite-Lift®
Typical Mounting Applications
system
YPICAL
AL MOUNTING
MOUNTING
APPLICATIONS
APPLICATIONS
system
®
®
MODULINE
MODULINE
85 LITE-LIFT
85 LITE-LIFT
TM
system
TM
TYPICAL
MOUNTING
APPLICATIONS
®
®
®
LINE
ODULINE
85 LITE-LIFT
85 LITE-LIFT
with®fascia
with fascia
MODULINE® 85 LITE-LIFT® with fascia
Wall Mount
Ceiling Mount
Moduline® 85 Lite-Lift®
with fascia
MODULINE
with fascia
and
holder
®
® 85 LITE-LIFT
®
LINE
ODULINE
85 LITE-LIFT
85 LITE-LIFT
with®fascia
with
fascia
and shade
andshade
shade
holder
holder
®
®
Wall Mount
Ceiling Mount
All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
All dimensions
All dimensions
in mm [in]in mm
Tolerances
[in] Tolerances
1.6mm [±1.6mm
1.6mm [±1.6mm
[1/16”] [1/16”]
Moduline® 85 Lite-Lift®
with fascia
and shade holder
17
17
17
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs,
plans, installation and specifications. Contact SunProject for project specific engineering drawings. All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
2
Moduline
®
MODULINE
105 LITE-LIFT
®
MODULINE 105 LITE-LIFT
system
105MOUNTING
Lite-Lift
PICAL
APPLICATIONS
MOUNTING
APPLICATIONS
Typical Mounting
Applications
®
TM
MODULINE® 105 LITE-LIFT
system
®
®
ODULINE
105 LITE-LIFT
with fascia
®
®
105 LITE-LIFT with fascia
system
TM
TM
TYPICAL MOUNTING APPLICATIONS
MODULINE® 105 LITE-LIFT® with fascia
Wall Mount
Ceiling Mount
®
®
105 LITE-LIFT
with fascia and shade holder
ODULINE
®
®
105 LITE-LIFT with fascia and shade holder
Moduline® 105 Lite-Lift®
with fascia
MODULINE® 105 LITE-LIFT® with fascia and shade holder
Wall Mount
18
Ceiling Mount
All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
dimensions
in mm [in]1.6mm
Tolerances
1.6mm
[±1.6mm [1/16”]
All dimensions in All
mm
[in] Tolerances
[±1.6mm
[1/16”]
Moduline® 105 Lite-Lift®
with fascia
and shade holder
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs,
plans, installation and specifications. Contact SunProject for project specific engineering drawings. All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
3
TM
PKT85 Lite-Lift®
Recess System with Fascia & Shade Holder
MODULINE® PKT85 LITE-LIFT®
system
Moduline
RECESS SYSTEM, WITH FASCIA & SHADE HOLDER
Model: MDL1-LL38-VS85-PKT
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs,
All dimensions
in mm
Tolerances
1.6mm
[±1.6mm
[1/16”]1.6mm [±1.6mm [1/16”]
plans, installation and specifications. Contact
SunProject for project
specific[in]
engineering
drawings. All
dimensions
in mm [in] Tolerances
19
4
MODULINE® ELEKTRA
WITH OPTIONAL FASCIA & SHADE HOLDER
Moduline
system
TM
Elektra
Available:
120V/AC Quick Connect/RTS plug-in unit
With Optional Fascia & Shade Holder
Available: 120V/AC Quick Connect/RTS plug-in unit
21
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs,
plans, installation and specifications. Contact SunProject for project specific engineering drawings. All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
5
MODULINE® ELEKTRA
Moduline
WITH OPTIONAL FASCIA & SHADE HOLDER
system
TM
Elektra
With Optional Fascia & Shade Holder
Multibanded (Tandem) System
Multibanded (Tandem) System
22
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs,
plans, installation and specifications. Contact SunProject for project specific engineering drawings. All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
6
MODULINE® ELEKTRA
Elektra
85/105/140 Brackets, Fabric Edge Clearance
400/500 Series Motors 120V/AC
85/105/140 BRACKETS, FABRIC EDGE CLEARANCE
system
Moduline
TM
400/500 Series Motors 120V/AC
*For 140
bracketfabric
fabric edge
clearance
details, please,
contact
our technical
department.
*For 140
bracket
edge
clearance
details,
please,
contact
our technical department.
All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs,
plans, installation and specifications. Contact SunProject for project specific engineering drawings. All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
23
7
MODULINE® ELEKTRA
Elektra
85/105/140 Brackets, Fabric Edge Clearance
Multibanded (Tandem) System
400/500 Series Motors 120V/AC
85/105 BRACKETS, FABRIC EDGE CLEARANCE
system
Moduline
TM
Multibanded (Tandem) System
400/500 Series Motors 120V/AC
For 140 bracket fabric edge clearance details, please, contact our technical department.
*For *140
bracket fabric edge clearance details, please, contact our technical department.
This drawing and the information contained herein is for general
presentation purposes
only.
The drawing
is not intended
to be incorporated
used for any engineering designs,
All dimensions
in mm
[in]
Tolerances
1.6mm
[±1.6mmor [1/16”]
plans, installation and specifications. Contact SunProject for project specific engineering drawings. All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
24
8
Moduline
®
®
MODULINE
85 ELEKTRA
MODULINE
85 ELEKTRA
system
105 Elektra
Typical Mounting Applications
PICAL
MOUNTING
APPLICATION
AL
MOUNTING
APPLICATION
TM
MODULINE® 85 ELEKTRA
system
®
®
DULINE
85 ELEKTRA
fascia
LINE
85 ELEKTRA
withwith
fascia
system
TM
TM
TYPICAL MOUNTING APPLICATION
MODULINE® 85 ELEKTRA with fascia
Wall Mount
Ceiling Mount
®
®
85 ELEKTRA
fascia
shade
holder
DULINE
85 ELEKTRA
withwith
fascia
and and
shade
holder
LINE
Moduline® 85 Elektra
with fascia
MODULINE® 85 ELEKTRA with fascia and shade holder
Wall Mount
Ceiling Mount
All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
All dimensions
in mm
[in] Tolerances
1.6mm
[±1.6mm
[1/16”]
All dimensions
in mm [in]
Tolerances
1.6mm
[±1.6mm
[1/16”]
Moduline® 85 Elektra
with fascia
and shade holder
25
25 25
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs,
plans, installation and specifications. Contact SunProject for project specific engineering drawings. All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
9
Moduline
®
MODULINE
ELEKTRA
®
MODULINE 105 105
ELEKTRA
ODULINE
105 ELEKTRA with fascia
LINE® 105 ELEKTRA with fascia
MODULINE® 105 ELEKTRA
system
TM
®
system
105 Elektra
YPICAL
MOUNTING
APPLICATION
Typical Mounting APPLICATION
Applications
AL MOUNTING
system
TM
TM
TYPICAL MOUNTING APPLICATION
MODULINE® 105 ELEKTRA with fascia
Wall Mount
Ceiling Mount
®
105 ELEKTRA with fascia and shade holder
ODULINE
LINE® 105 ELEKTRA with fascia and shade holder
Moduline® 85 Elektra
with fascia
MODULINE® 105 ELEKTRA with fascia and shade holder
Wall Mount
26
Ceiling Mount
All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
All dimensions
in mm
[in] Tolerances
1.6mm
[±1.6mm
[1/16”]
All dimensions
in mm [in]
Tolerances
1.6mm
[±1.6mm
[1/16”]
Moduline® 85 Elektra
with fascia
and shade holder
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs,
plans, installation and specifications. Contact SunProject for project specific engineering drawings. All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
10
TM
140 Elektra
Typical Mounting Application
Moduline 140 Elektra with fascia
MODULINE® 140 ELEKTRA
system
Moduline
TYPICAL MOUNTING APPLICATION
MODULINE® 140 ELEKTRA with fascia
Wall Mount
Ceiling Mount
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs,
plans, installation and specifications. Contact SunProject for project specific engineering drawings. All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
11
27
Moduline
TM
MODULINE® PKT85 ELEKTRA 120V/AC
system
PKT85 Elektra 120V/AC
Recess System, with Fascia & Shade Holder
RECESS SYSTEM, WITH FASCIA & SHADE HOLDER
Model: MDL1-EM46-VS85-PKT
28
All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs,
plans, installation and specifications. Contact SunProject for project specific engineering drawings. All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
12
Moduline
TM
MODULINE® PKT105 ELEKTRA 120V/AC
system
PKT105 Elektra 120V/AC
Recess System, with Fascia & Shade Holder
RECESS SYSTEM, WITH FASCIA & SHADE HOLDER
Model: MDL1-EM46-VS105-PKT
All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs,
plans, installation and specifications. Contact SunProject for project specific engineering drawings. All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
29
13
MODULINE® LITE-LIFT®
TM
Lite-Lift®
With Fascia, Shade Holder and Side Channels
WITH FASCIA, SHADE HOLDER AND SIDE CHANNELS
system
Moduline
MODULINE® LITE-LIFT® single shade with side channel system
Moduline® Lite-Lift® Single Shade
with Side Channel System
Moduline® Lite-Lift® tandem shade
with side channel system
MODULINE® LITE-LIFT® tandem shade with side channel system
30
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs,
plans, installation and specifications. Contact SunProject for project specific engineering drawings. All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
14
TM
MODULINE® 4-85 LITE-LIFT®
4-85 Lite-Lift®
With Fascia, Shade Holder and T480 Side Channel
WITH FASCIA, SHADE HOLDER AND T480 SIDE CHANNEL
All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs,
plans, installation and specifications. Contact SunProject for project specific engineering drawings. All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
system
Moduline
31
15
MODULINE® 4-105 LITE-LIFT®
TM
4-105 Lite-Lift®
With Fascia, Shade Holder and T480 Side Channel
WITH FASCIA, SHADE HOLDER AND T480 SIDE CHANNEL
32
system
Moduline
All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs,
plans, installation and specifications. Contact SunProject for project specific engineering drawings. All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
16
4-85 Lite-Lift®
Recess System with Fascia and Shade Holder
TM
MODULINE® PKT4-85 LITE-LIFT®
system
Moduline
RECESS SYSTEM, WITH FASCIA & SHADE HOLDER
Model: MDL4-LL38-VS85-PKT
All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs,
plans, installation and specifications. Contact SunProject for project specific engineering drawings. All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
33
17
4-105 Lite-Lift®
Recess System with Fascia and Shade Holder
TM
MODULINE® PKT4-105 LITE-LIFT®
system
Moduline
RECESS SYSTEM, WITH FASCIA & SHADE HOLDER
Model: MDL4-LL38-VS105-PKT
34
All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs,
plans, installation and specifications. Contact SunProject for project specific engineering drawings. All dimensions in mm [in] Tolerances 1.6mm [±1.6mm [1/16”]
18