2016 Wireless Musical Instrument Systems
Transcription
2016 Wireless Musical Instrument Systems
2016 Wireless Musical Instrument Systems Cable-free and Truly Wireless Audio Performance Contents VM Series String Instrument Microphone Sets 2 VT Series String Instrument Transmitters 4 SM Series Saxophone Microphone Sets 6 ST Series Saxophone Transmitters 8 ET Series Erhu Transmitters 10 MT-24 Digital Guitar Transmitter 12 MU Series Instrument Microphone Capsule Modules 13 VM Series String Instrument Microphone Sets Profile 1. The MIPRO proprietary VM-22 viola / violin microphone set and VM-24 cello microphone set has been designed after years of collaborating with professional musicians. It consists of a miniature condenser microphone with wide frequency response and a proprietary holder. It fits snugly, is easy to install and remove and protects these expensive instruments from surface scratches. It can be strategically placed in positions that pick up the accurate sound of the instrument while minimizing handling noise during performance. 2. For audio output, connect the VM-22 with a VC-22 cable. Two connecting methods: A. Wired: Connect the VM-22 with a VC-22 cable to a MJ-53 condenser microphone adaptor and plug into a PA system. B. Wireless: Connect the VM-22 with a VC-22 cable to any MIPRO ACT Series bodypack transmitter for wireless transmission to a compatible receiver. VM-24 Cello Microphone Set Installation on Cello VM-22 Viola / Violin Microphone Set Patents Taiwan Utility M431407 China Utility ZL201220047110.X Installation on Violin VC-22 2 2 0 1 6 Viola / Violin Microphone Cable VM Series String Instrument Microphone Sets Transmission Methods 1. Wireless: Connect the VM-22 with VC-22 to ACT Series bodypack transmitter for wireless transmission. or + VC-22 VM-22 Receiver PA system 2. Wired: Connect the VM-22 with VC-22 to a MJ-53 and plug into a PA system. + VC-22 VM-22 MJ-53 Mixer Main Features & Specifications Model VM-24 VM-22 VC-22 MJ-53 Name Cello Microphone Set Output Jack Viola/Violin Microphone Set Viola/Violin Microphone Cable Condenser Microphone Adaptor Phone Jack female MMCX CRIMP male Mini XLR female XLR male N/A Installation Use a proprietary holder to place VM-24 in a position that pick up the accurate sound of the instrument. Use a proprietary holder to place VM-22 in a position that pick up the accurate sound of the instrument. Connect VM22 to MJ-53 or bodypack transmitter VC-22 to MJ-53 to a PA system Connect the VM-22 with VC-22 to ACT Series bodypack transmitter for wireless transmission to a compatible receiver. Capsule Module MU-55 condenser capsule module N/A N/A N/A N/A Capsule: 4.5 mm cardioid condenser Capsule Frequency Response: Specifications 40 Hz – 20 kHz Sensitivity: -49 ± 3 dBV / Pa Max. SPL: 135 dB N/A ACT Series Receiver Transmission Method 1. Connect the VM-22 with VC-22 to a MJ-53 and plug into a PA system. 2. Connect the VM-22 with VC-22 to a bodypack transmitter for wireless transmission. Note Refer to actual product in the event of product discrepancy. 2 0 1 6 3 VT Series String Instrument Transmitters Profile 1. The VT-22 wireless viola/violin set is designed for a cable-free, truly wireless violin audio performance. Simply integrate the miniature, lightweight VT-22 transmitter to its proprietary violin mount and connect to VM-22. This attaches snugly to violins and is easy to install and remove while protecting these expensive instruments from surface scratches. Strategically placed in flexible positions, it will not interfere during performances. 2. The VT-24 digital wireless saxophone transmitter is a VM-24 integrated with a MT-24 digital transmitter for wireless transmission to the ACT-2400 Series receivers or a MRM-24 receiver module hooked up to a portable PA. VT-22 Wireless Viola / Violin Set Patents Taiwan Utility M431407 China Utility ZL201220047110.X Compatible Installation on Violin VT-24 ACT Series receivers Digital Wireless Cello Set Compatible Installation on Cello 4 2 0 1 6 ACT-2400 Series receivers VT Series String Instrument Transmitters Specifications Model VT-22 VT-24 Name Wireless Viola/Violin Transmitter Digital Wireless Cello Transmitter Wireless Transmission Type UHF analog modulation 2.4 GHz digital modulation Frequency Range UHF 480 – 934 MHz 2.4 GHz - ISM Capsule Module VM-22 VM-24 Transmitter Rechargeable analog transmitter MT-24 digital transmitter Receiver ACT Series ACT-2400 Series Installation Mount the VT-22 with a proprietary Mount the VT-24 with a proprietary holder holder in a position that picks up the in a position that picks up the accurate accurate sound of the viola or violin. sound of the cello. Channel Set-up ACT Sync RF Output Power 10 – 30 mW switchable (country dependent) 2 mW / 10 mW switchable (country dependent) Dimensions (W × H × D) 57 × 84 × 47 mm / 2.2 × 3.3 × 1.9 " 86 × 359 × 29 mm / 3.4 × 14.1 × 1.1 " Weight Approx. 55 g / 1.9 oz, battery included Approx. 98 g / 3.5 oz, excluding battery Battery Rechargeable lithium battery ICR 18500 rechargeable lithium battery Operating Time A 25-minute fast charge provides up Min 4 hours. A 10-minute quick charge to 1 hour operation. Minimum 10 hours provides up to 40 minutes operation. of operation per 4-hour full charge (depending on the battery quality). Charger An adaptor (2DB005) Note Refer to actual product in the event of product discrepancy. Optional MP-80 (with an adaptor plug) / MP-20 2 0 1 6 5 SM Series Saxophone Microphone Sets Profile 1. The MIPRO SM-32 / SM-24 saxophone microphone sets have been designed after years of collaborating with professional musicians. Three detachable wide dynamic range condenser microphone capsules, MU-10, MU-16 and MU-20, together with a gooseneck clip, offer optimal flexibility for performers and instruments. A shock-proof microphone module is connected to a gooseneck for minimizing handling and hitting noises. Simply integrate the SM-32 to the SH-32 and strategically place it in a position that picks up the accurate sound of the instrument. The SM-32 / SM-24 are easy to use, install or remove, protecting the instruments from surface scratches. 2. For audio output, connect the SM-32 with a SC-32 cable. Two connecting methods: A. Wired: Mount the SM-32 with SH-32 clip to the instrument and connect with a SC-32 cable to a MJ-53 condenser microphone adaptor and plug into a PA system. B. Wireless: Mount the SM-32 with SH-32 clip to the instrument and connect with a SC-32 cable to any MIPRO ACT Series bodypack transmitter for wireless transmission to a compatible receiver. C. SM-32 / SM-24 can fit other wind instruments as well. SM-24 | SM-32 Saxophone Microphone Sets SM-24 SC-32 Cable for SM-32 6 2 0 1 6 SM-32 SH-32 Saxophone Microphone Clip SM Series Saxophone Microphone Sets Transmission Methods 1. Wireless: Connect SM-32 with SC-32 to ACT Series bodypack transmitter for wireless transmission. or + SC-32 SM-32 Receiver PA system 2. Wired: Connect SM-32 with SC-32 to a MJ-53 and plug into a PA system. + SC-32 SM-32 MJ-53 Mixer Main Features & Specifications Model SM-24 SM-32 Name Saxophone Microphone Module Saxophone Microphone Module Cable for SM-32 Output Jack Phone Jack female Mini XLR male Mini XLR female N/A Capsule Module MU-10 / MU-16 / MU-20 interchangeable condenser microphone capsule modules N/A Installation Use SH-32 to place the SM24 in a position that pick up the accurate sound of the saxophone. SC-32 to MJ-53 to a PA system Use SH-32 to place the SM32 in a position that pick up the accurate sound of the saxophone. SC-32 Connect SM32 to MJ-53 / bodypack transmitter SH-32 MJ-53 Condenser Saxophone Microphone Microphone Clip Adaptor Integrate SM24 / SM-32 with SH-32 and mount on the instrument Mini XLR (input) XLR (output) Transmission 1. Connect SM-32 to MJ-53 for wired transmission Method 2. Connect SM-32 to a bodypack transmitter for wireless transmission. Note Refer to actual product in the event of product discrepancy. 2 0 1 6 7 ST Series Saxophone Transmitters Profile 1. The ST-32 wireless saxophone transmitter is a SM-32 integrated with a transmitter for wireless transmission to the ACT Series receivers or MA Series wireless PA system. 2. The ST-24 digital wireless saxophone transmitter is a SM-24 integrated with a MT-24 digital transmitter for wireless transmission to the ACT-2400 Series receivers or a MRM-24 receiver module hooked up to a portable PA. 3. Simply clamp the ST-32 / ST-24 transmitter module snugly with SH-32 clip to a saxophone or other wind instrument. The compact, lightweight ST-32 / ST-24 is easy to install and remove. Strategically placed in flexible positions, it will not interfere during performances. ST-32 ST-24 Wireless Saxophone Set Digital Wireless Saxophone Set Patents Taiwan Utility M430691 Utility M465648 Utility M470359 China Utility ZL201220047175.4 Utility ZL201320480325.5 Utility ZL201320480698.2 ST-32 Installation on Saxophone 8 2 0 1 6 ST-24 ST Series Saxophone Transmitters Specifications Model ST-32 ST-24 Name Wireless Saxophone Transmitter Digital Wireless Saxophone Transmitter Wireless Transmission Type UHF analog modulation 2.4 GHz digital modulation Frequency Range UHF 480 – 934 MHz 2.4 GHz - ISM Capsule Module MU-10 / MU-16 / MU-20 interchangeable condenser microphone capsule modules Microphone N/A SM-24 Transmitter Rechargeable analog transmitter MT-24 digital transmitter Receiver ACT Series ACT-2400 Series Installation Mount the ST-32 / ST-24 with SH-32 clip in a position that picks up the accurate sound of the saxophone. Channel Set-up ACT Sync RF Output Power 10 – 30 mW switchable (country dependent) 2 mW / 10 mW switchable (country dependent) Dimensions (W × H × D) 64 × 228 × 44 mm / 2.5 × 9 × 1.7 " 68 × 287 × 47 mm / 2.7 × 11.3 × 1.9 " Weight Approx. 81 g / 2.9 oz, battery included, excluding microphone modules Approx. 104 g / 3.7 oz, excluding battery and microphone modules Battery Rechargeable lithium battery ICR 18500 rechargeable lithium battery Operating Time Min 4 hours. A 10-minute quick charge provides up to 40 minutes operation. A 25-minute fast charge provides up to 1 hour operation. Minimum 10 hours of operation per 4-hour full charge (depending on the battery quality). Charger An adaptor (2DB005) Optional MP-80 (with an adaptor plug) / MP-20 Note Refer to actual product in the event of product discrepancy. 2 0 1 6 9 ET Series Erhu Transmitters Profile 1. The patented ET-32 erhu transmitter has been designed after collaborating with erhu musicians. The detachable wide dynamic range condenser microphone capsules, MU-10, MU-16 and MU-20, offer optimal flexibility for performers. The capsules could be installed on a shock-proof capsule mount, which is connected to a gooseneck and integrate with a miniature transmitter. Simply integrate the ET-32 to the EH-32 and strategically place it in a position that picks up the accurate sound of erhu and avoids touching and hitting noises. 2. The ET-32 requires an ACT Series receiver or MA Series wireless PA system for wireless transmission. The lightweight ET-32 is easy to install and remove, not obstructive to performers and ideal for erhu performers. 3. The ET-24 digital wireless erhu transmitter is an EM-24 integrated with a MT-24 digital transmitter. It can be placed on the neck of erhu with an EH-32 for wireless transmission to the ACT-2400 Series receivers or a MRM24 receiver module hooked up to a portable PA. ET-32 ET-24 Wireless Erhu Set Digital Wireless Erhu Set Patents Taiwan Utility M485482 Design D167994 China Utility ZL201420258550.9 Design ZL201430140678.0 ET-32 10 2 0 1 6 Installation on Erhu ET-24 ET Series Erhu Transmitters EH-32 Erhu Microphone Clip EH-32 Specifications Model EH-32 Name Erhu Microphone Clip Dimensions ( Ø × L) 22 × 60 mm / 0.9 × 2.4 " Weight Approx. 16 g / 0.56 oz Note Refer to actual product in the event of product discrepancy. Specifications Model ET-32 ET-24 Name Wireless Erhu Transmitter Digital Wireless Erhu Transmitter Wireless Transmission Type UHF analog modulation 2.4 GHz digital modulation Frequency Range UHF 480 – 934 MHz ISM 2.4 GHz Capsule Module MU-10 / MU-16 / MU-20 interchangeable condenser microphone capsule modules Transmitter Rechargeable analog transmitter MT-24 digital transmitter Receiver ACT Series ACT-2400 Series Installation Mount the ET-32 / ET-24 with EH-32 in a position that picks up the accurate sound of the erhu. Channel Set-up ACT Sync RF Output Power 10 – 30 mW switchable (country dependent) 2 mW / 10 mW switchable (country dependent) Dimensions (W × H × D) 44 × 228 × 46 mm / 1.7 × 9 × 1.8 " 51 × 287 × 53 mm / 2 × 11.3 × 2.1 " Weight Approx. 82 g / 2.9 oz, battery included, excluding microphone modules Approx. 105 g / 3.7 oz, excluding battery and microphone modules Battery Rechargeable lithium battery ICR 18500 rechargeable lithium battery Operating Time Min 4 hours. A 10-minute quick charge provides up to 40 minutes operation. A 25-minute fast charge provides up to 1 hour operation. Minimum 10 hours of operation per 4-hour full charge (depending on the battery quality). Charger An adaptor (2DB005) Optional MP-80 with an adaptor or MP-20 Note Refer to actual product in the event of product discrepancy. 2 0 1 6 11 MT-24 Digital Guitar Transmitter Profile 1. The MT-24 is a digital transmitter with an integrated 3.5 mm to 6.3 mm threaded adaptor. The plug can be rotated up to 90° . Simply plug it into the guitar for a cable-free, truly wireless audio performance, requiring the ACT-2400 Series receivers or a MRM-24 receiver module hooked up to a portable PA. 2. The MT-24 can be plugged into an electric/acoustic guitar, bass, keyboard, MIDI, keytar, accordion, PC, smartphone, projector with phone jack audio output for a true wirelessly audio amplification and performance. MT-24 Digital Guitar Transmitter MP-20 Charger Ø3.5mm Ø6.3mm Phone Jack Specifications Model MP-80 Charging Station Compatible with ACT-2400 Series receivers MT-24 Name Digital Guitar Transmitter Transmitter MT-24 digital transmitter Frequency Band 2.4 GHz - ISM Receiver ACT-2400 Series Installation Plug the MT-24 into the guitar RF Output Power 2 mW / 10 mW switchable (country dependent) Transmitting Mode Frequency hopping Max. Audio Input 6.5 dBV Battery Meter 4-level green/red LED display Impedance 1.0 M Ω Dimensions (W × H × D) 84 × 35 × 29 mm / 3.3 × 1.4 × 1.1 " Weight Approx. 61 g / 2.2 oz, excluding battery Battery ICR 18500 rechargeable lithium battery Operating Time A 25-minute fast charge provides up to 1 hour operation. Minimum 10 hours of operation per 4-hour full charge (depending on the battery quality). Charger (optional) MP-80 (with an adaptor plug) / MP-20 Note Refer to actual product in the event of product discrepancy. 12 2 0 1 6 MU Series Instrument Microphone Capsule Modules Profile The MU-20 / MU-16 / MU-10 condenser capsules modules are three diameter capsules encapsulated in the copper grille housings which have the same mount for assembling on the microphone. They offer optimal flexibility for performers and instruments. MU-20 | MU-16 | MU-10 ECM Capsule Modules MU-20 MU-16 MU-10 Frequency Responses Polar Patterns Main Features & Specifications Model MU-20 Unit ECM-20 Color Black Capsule MU-16 MU-10 ECM-16 ECM-10 20 mm 16 mm 10 mm Polar Pattern Supercardioid Semi-supercardioid Cardioid Frequency Response 50 Hz – 20 kHz 55 Hz – 20 kHz 65 Hz – 20 kHz Sensitivity -49 dB Max. SPL 145 dB SPL Features Bright and detailed sound, superb directionality, high fidelity and dynamic range, wide frequency response, rapid transient response, low feedback and low touching noises. Note Refer to actual product in the event of product discrepancy. -52 dB 142 dB SPL 2 0 1 6 13 MIPRO Headquarters MI 016/01