smartwall banner R-02

smartwall banner R-02
SW-R-02
Smartwall is a collection of modern extrusion-based fabric graphic banner
displays. Smartwall is easy to assemble and disassemble and provides
your choice of single-sided or double-sided integrated fabric graphic murals.
features and benefits:
- 50mm silver extrusion frame
- Single or double-sided SEG
dye-sublimated fabric graphics
- Easy assembly
- Comes packaged in one MGC38 wheeled
molded case for transport or storage
- Lifetime hardware warranty against
manufacturer defects
dimensions:
Hardware
Graphic
Assembled unit:
35.4375”w x 70.875”h x 13.8”d approx.
900mm(w) x 1800mm(h) x 350mm(d)
Graphic A:
Total visible area: 35.4375”w x 70.875”h
900mm(w) x 1800mm(h)
Refer to related graphic templates for
more information
Shipping
Shipping dimensions:
One MGC38 case: 19”l x 19”w x 45”h
483mm(l) x 483mm(w) x 1143mm(h)
Approximate shipping weight: (entire kit)
38 lbs/17.2 kg
additional information:
Graphic material:
Dye-sublimated fabric
Optional lighting available
smartwall
© 2013 Nimlok Display and Exhibit Solutions Worldwide
For questions contact your local Nimlok distributor
SMARTWALL BANNERS R-02
SMARTWALL BANNERS R-02
SET-UP NOTES
1. Redesign of this exhibit without approval by Nimlok may result in dangerous and unsafe structures. Nimlok disclaims
any responsibility for redesigned exhibits it does not approve in writing.
2. Parts and components such as panels and extrusions are manufactured to metric sizing. Where ever possible sizes have
been noted in feet and inches as well as in metric. Below is the imperial to metric sizing table as reference. "Nominal" refers
to approximate size.
IMPERIAL TO METRIC SIZES
8' Nominal = 94 1/2" or 2400mm Actual
4' Nominal = 47 1/4" or 1200mm Actual
3' Nominal = 35 7/16" or 900mm Actual
2' Nominal = 23 5/8" or 600mm Actual
1' Nominal = 11 13/16" or 300mm Actual
1. Redesign of this exhibit without approval by
Nimlok may result in dangerous and unsafe
structures. Nimlok disclaims any responsibility for
redesigned exhibits it does not approve in writing.
2. Parts and components such as panels and
extrusions are manufactured to metric sizing.
Where ever possible sizes have been noted in
feet and inches as well as in metric. Below is the
imperial to metric sizing table as reference.
"Nominal" refers to approximate size.
2400mm = (94 1/2")
2100mm = (82 5/8")
1800mm = (70 7/8")
1500mm = (59")
1200mm = (47 1/4")
900mm = (35 1/2")
600mm = (23 5/8")
300mm = (11 7/8")
P Phone Line / Fax
I
Internet connection
Outlet
Main Drop
(point of distrution)
Wire running under carpet
PHFC2
SMARTWALL
BANNERS
Title: SET-UP INSTRUCTIONS
Nimlok Company
7420 N. Lehigh Avenue
Niles, Illinois 60714-4024
Phone: 847-647-1012
Fax: 847-647-2044
www.nimlok.com
EP
#
4
2
4
2
2
Description
PHFC2-900-3 [35.43"] (Mitre / Corner Lock one end - straight cut & lock hole other end
END TO END LOCK CONNECTOR
90 DEGREE CB9 CORNER LOCK CONNECTOR
PHFC2-900-1[35.43"] (Mitre / Corner Lock Both ends - No Locks)
500MM FLAT FOOT FOR SMARTWALL FRAMES
NOTE: TURN EACH CAM
A LITTLE BIT, AND THEN
GO BACK AND TIGHTEN
BOTH TO THE PROPER
TENSION.
1. Redesign of this exhibit without approval by
Nimlok may result in dangerous and unsafe
structures. Nimlok disclaims any responsibility for
redesigned exhibits it does not approve in writing.
F10
EXTRUSION
NOTE: TURN EACH CAM
A LITTLE BIT, AND THEN
GO BACK AND TIGHTEN
BOTH TO THE PROPER
TENSION.
CORNER LOCK
2400mm = (94 1/2")
2100mm = (82 5/8")
1800mm = (70 7/8")
1500mm = (59")
1200mm = (47 1/4")
900mm = (35 1/2")
600mm = (23 5/8")
300mm = (11 7/8")
LOCK
CONNECTOR
CORNER LOCK
I
Internet connection
Outlet
Main Drop
(point of distrution)
T HANDLE
LOCK
LOCK
P Phone Line / Fax
Wire running under carpet
F13
CAM
2. Parts and components such as panels and
extrusions are manufactured to metric sizing.
Where ever possible sizes have been noted in
feet and inches as well as in metric. Below is the
imperial to metric sizing table as reference.
"Nominal" refers to approximate size.
LOCK CONNECTOR
LOCK
Code
F13
LOCK CONNECTOR
CORNER LOCK
F10
SW-FOOT
Slide LOCK CONNECTOR together with
extrusion. Then tighten the CAMS
to lock EXTRUSIONS together
F13
CAM
CORNER LOCK
LOCK
CORNER
LOCK
LOCK CONNECTOR
PHFC2
LOCK
LOCK
CONNECTOR
LOCK CONNECTOR
HORIZONTAL
EXTRUSION
VERTICAL
EXTRUSION
LOCK
F13
T HANDLE
Slide CORNER LOCK together with
extrusion. Then tighten the screws
to lock the CORNER LOCKs together
F13
CORNER LOCK
CORNER LOCK
SMARTWALL
BANNERS
Title: SET-UP INSTRUCTIONS
Nimlok Company
7420 N. Lehigh Avenue
Niles, Illinois 60714-4024
Phone: 847-647-1012
Fax: 847-647-2044
www.nimlok.com
SW-FOOT
F10
SW-FOOT
1
Code
GRAPHIC A
#
1
Description
70.87"H X 35.43"W SINGLE SIDED DYESUB GRAPHIC (UNLINED) PRINTED ON OXFORD W/ FCE-2 ALL 4 SIDES
1. Redesign of this exhibit without approval by
Nimlok may result in dangerous and unsafe
structures. Nimlok disclaims any responsibility for
redesigned exhibits it does not approve in writing.
2. Parts and components such as panels and
extrusions are manufactured to metric sizing.
Where ever possible sizes have been noted in
feet and inches as well as in metric. Below is the
imperial to metric sizing table as reference.
"Nominal" refers to approximate size.
GRAPHIC A
2400mm = (94 1/2")
2100mm = (82 5/8")
1800mm = (70 7/8")
1500mm = (59")
1200mm = (47 1/4")
900mm = (35 1/2")
600mm = (23 5/8")
300mm = (11 7/8")
P Phone Line / Fax
I
Internet connection
Outlet
Main Drop
(point of distrution)
Wire running under carpet
GRAPHIC
PULL TABS
PHFC2
GRAPHIC
START POINT
ONE CORNER
PULL TABS
Install graphic by pressing into the
top and bottom channels of extrusion. To pull graphics
out of the channels use tabs on the front side
LIGHT
Light clip
SMARTWALL
BANNERS
Title: SET-UP INSTRUCTIONS
Nimlok Company
7420 N. Lehigh Avenue
Niles, Illinois 60714-4024
Phone: 847-647-1012
Fax: 847-647-2044
www.nimlok.com
Slide the light clip into the light. Then slide the
light at an angle and gently lower down.
2
nimlok
smartwall banner R 01
check out these related products:
smartwall banner R 02
smartwall banner R 03
smartwall banner R 04
smartwall banner R 05
smartwall banner S 01
smartwall banner S 02
smartwall banner S 03
smartwall banner S 04
smartwall kit 01
smartwall kit 02
smartwall kit 03
smartwall kit 04
smartwall kit 05
smartwall kit 06
smartwall kit 07
smartwall kit 08
Redesign of this exhibit without approval by Nimlok may result in dangerous and unsafe structures. Nimlok disclaims any responsibility
for redesigned exhibits it does not approve in writing. Parts and components such as panels and extrusions are manufactured to metric sizing.
We continue to improve and modify our product range and reserve the right to vary the specifications without prior notice. All dimensions
and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications.