Fluxa Area floodlights for high pressure discharge lamps and

Transcription

Fluxa Area floodlights for high pressure discharge lamps and LEDs
Fluxa is a series of area floodlights with symmetrical or
wide beam reflectors. There
are 4 sizes for high pressure
discharge lamps or with LEDs,
in various wattages and beam
distributions. Fluxa is available
with two different mounting
systems; either with mounting
bracket or Fluxa G for pole
mounting. Fluxa Mini G lends
itself well to being used in
combination with larger Fluxa
models.
Three sizes are available with
energy efficient LEDs and precise optical lenses for uniform
illumination with high lux
levels.
214
Fluxa
Fluxa Mini
Fluxa Mini
For ceramic metal halide lamps
(HIT-TC-CE and HIT-CE)
protection class I, IP65
windage area AW 0.05 m2
die cast aluminium housing, polyester powder
coated, asymmetrical textured aluminium reflector,
all exterior steel parts are stainless steel, tempered
safety glass, silicon gasket, closure by 2 stainless
steel screws, hinged front frame, powder coated
aluminium mounting bracket with tilt scale, 4 drilled
holes Ø 8.5 mm, spacing 70 mm (120 mm),
1 centre hole Ø 17 mm, tilt range 210°, M16
cable gland, integral electronic ballast, supplied
without lamp
70
120
8,
5
185
202
17
89
210°
250
294
I (cd/klm)
90
2m
90
32 16 8,0
60
30
HIT-TC-CE 20 W
4,0
1600 lm
8266041
0
400
600
32
32
16 8,0
4,0
2,0
1,0
2m
800
LPH : 3,0 m
2m
4m
6m
2m
32 16 8,0
8m
8268046
32
32 16 8,0
4,0
2,0
90
4m
2m
64
60
30
400
32
6m
8m
Lamp
Lampholder
Weight
Beam angle γ
black
Philips CDM-Tm
PGJ5
2.2 kg
43°
8 266 061 009
white
20 W
8 266 051 009
silver grey
Part number
Colour
Lamp
Lampholder
Weight
Beam angle γ
8 268 046 009
black
General Electric
GU6.5
2.3 kg
43°
8 268 066 009
white
CMH 20 W/
8 268 056 009
silver grey
Osram HCI-TF 20 W
10 m
HIT-TC-CE 35 W
3200 lm
16
8269046
0
64
600
800
Colour
8 266 041 009
LPH : 3,0 m
2m
I (cd/klm)
Part number
1,0
2m
90
Fluxa Mini 20 W, asymmetrical beam
10 m
HIT-TC-CE 20 W
4,0
1600 lm
0
40
64
32
16
8,0
4,0
2m
2,0
LPH : 3,5 m
2m
4m
6m
2m
64
32
16
8m
HIT-CE 35 W
3300 lm
8270043
64
64
32
16
8,0
4,0
Part number
Colour
Lamp
Lampholder
Weight
Beam angle γ
8 269 046 009
black
General Electric
GU6.5
2.3 kg
43°
8 269 066 009
white
CMH 35 W/
8 269 056 009
silver grey
Osram HCI-TF 35 W
Part number
Colour
Lamp
Lampholder
Weight
Beam angle γ
8 270 043 009
black
HIT-CE 35 W
G12
2.4 kg
42°
8 270 063 009
white
8 270 053 009
silver grey
10 m
8,0
0
Fluxa Mini 35 W, asymmetrical beam
2,0
LPH : 3,5 m
2m
2m
4m
6m
8m
10 m
Lamps (see page 364 – 365)
HIT-TC-CE
HIT-TC-CE
HIT-CE
Fluxa Mini
215
Fluxa Mini
Fluxa Mini, wide beam
For ceramic metal halide lamps (HIT-TC-CE)
or with high performance LEDs,
integral temperature monitoring device
coated, wide beam aluminium reflector, all exterior
steel parts are stainless steel, tempered safety glass,
silicon gasket, closure by 2 stainless steel screws,
hinged front frame, powder coated aluminium
mounting bracket with tilt scale, 4 drilled holes
Ø 8.5 mm, spacing 70 mm (120 mm), 1 centre
hole Ø 17 mm, tilt range 210°, M16 cable gland,
integral electronic ballast (integral converter for
LEDs), supplied without lamp
70
120
202
5
8,
185
17
89
210°
250
294
40
Fluxa Mini 20 W, wide beam
Part number
Colour
I (cd/klm)
Lamp
Lampholder
PGJ5
Weight
8 266 042 009
black
Philips CDM-Tm
2,2 kg
8 266 062 009
white
20 W
8 266 052 009
silver grey
Part number
Colour
Lamp
Lampholder
Weight
8 268 047 009
black
General Electric
GU6.5
2.3 kg
8 268 067 009
white
CMH 20 W/
8 268 057 009
silver grey
Osram HCI-TF 20 W
Half beam angle γ
C 0 – 180
C 90 – 270
75°
135°
HIT-TC-CE 20 W
1600 lm
6m
1,0
2,0
4m
2m
2,0
4,0
8,0
C 90 – 270
135°
16 m
8268047
8,0
16
8m
12 m
16 m
I (cd/klm)
Part number
Colour
Lamp
Lampholder
Weight
8 269 047 009
black
General Electric
GU6.5
2.3 kg
8 269 067 009
white
CMH 35 W/
8 269 057 009
silver grey
Osram HCI-TF 35 W
Half beam angle γ
C 0 – 180
C 90 – 270
75°
135°
8m
1,0
2,0
HIT-TC-CE 35 W
3200 lm
90
90
100
8269047
4m
30
4,0
LPH : 3,5 m
2,0
4,0 8,0
200
30
2,0
16
300
4m
Fluxa Mini LED, wide beam
8m
12 m
16 m
20 m
I (cd/klm)
Part number*
Colour
Light source
Weight
8 280 045 059
black
15 x LED 2.4 W neutral white
2.3 kg
8 280 065 059
30
LPH : 3,0 m
4,0
4m
Fluxa Mini 35 W, wide beam
12 m
2,0
4,0
200
HIT-TC-CE 20 W
1600 lm
1,0
4m
2,0
30
300
8m
6m
2m
8266042
16
Half beam angle γ
75°
90
100
LPH : 3,0 m
4,0
4m
C 0 – 180
90
white
Half beam angle γ
C 0 – 180
C 90 – 270
70°
138°
8m
LED
1405 lm
4.0
4m
LPH : 4.0 m
16
90
8280045050
2.0
4.0 8.0
90
8.0
300
450
600
8 280 055 059
silver grey
*These luminaires are also available with warm white LEDs upon request.
Typical illumination levels and
10.0 m
uniformity values
Fluxa Mini LED
216
H
4m
5m
6m
D
20 m
23 m
27 m
D/H
4.5
4.5
4
Eav
6 Lx
5 Lx
4 Lx
Emin/Eav
0.3
0.36
0.34
Fluxa Mini
Lamps/Light source (see page 364 – 365)
LEDs, replacement module available
HIT-TC-CE
HIT-TC-CE
Fluxa Mini G
Fluxa Mini G
For ceramic metal halide lamps
(HIT-TC-CE and HIT-CE)
steel screws, hinged front frame, adjustable bracket
assembly, 4 drilled holes Ø 6.5 mm, spacing
50 x 30 mm, tilt range +/- 15°, M16 cable gland,
integral electronic ballast, supplied without lamp
80
185
49
89
66
250
306
I (cd/klm)
90
90
2m
32 16 8,0
60
30
HIT-TC-CE 20 W
1600 lm
8266141
0
400
600
32
32 16 8,0
4,0
2,0
1,0
2m
800
LPH : 3,0 m
2m
4m
2m
32 16 8,0
6m
8m
8268146
32 16 8,0
32
4,0
2,0
90
64
30
400
6m
8m
Lampholder
Weight
Beam angle γ
Philips CDM-Tm
PGJ5
2.4 kg
43°
8 266 161 009
white
20 W
8 266 151 009
silver grey
Part number
Colour
Lamp
Lampholder
Weight
Beam angle γ
8 268 146 009
black
General Electric
GU6.5
2.5 kg
43°
8 268 166 009
white
CMH 20 W/
8 268 156 009
silver grey
Osram HCI-TF 20 W
10 m
HIT-TC-CE 35 W
3200 lm
32 16 8,0
8269146
0
600
800
4m
2,5 m
60
Lamp
black
LPH : 3,0 m
2m
I (cd/klm)
Colour
8 266 141 009
1,0
2m
90
Part number
10 m
HIT-TC-CE 20 W
1600 lm
0
Fluxa Mini G 20 W, asymmetrical beam
64
32 16 8,0
4,0
2,0 1,0
LPH : 3,5 m
2,5 m
4m
8m
2,5 m
64
32 16 8,0
HIT-CE 35 W
3300 lm
4,0
8270143
32 16 8,0
4,0
Part number
Colour
Lamp
Lampholder
Weight
Beam angle γ
8 269 146 009
black
General Electric
GU6.5
2.5 kg
43°
8 269 166 009
white
CMH 35 W/
8 269 156 009
silver grey
Osram HCI-TF 35 W
Part number
Colour
Lamp
Lampholder
Weight
Beam angle γ
8 270 143 009
black
HIT-CE 35 W
G12
2.6 kg
42°
8 270 163 009
white
8 270 153 009
silver grey
12 m
0
64
Fluxa Mini G 35 W, asymmetrical beam
2,0 1,0
LPH : 3,5 m
2,5 m
4m
8m
12 m
HIT-TC-CE
HIT-TC-CE
HIT-CE
Fluxa Mini G
217
Fluxa Mini G
Fluxa Mini G, wide beam
For ceramic metal halide lamps (HIT-TC-CE)
or with high performance LEDs,
assembly, 4 drilled holes Ø 6.5 mm, spacing
50 x 30 mm, tilt range +/- 15°, M16 cable
gland, integral electronic ballast (integral converter
for LEDs), supplied without lamp
80
185
49
89
66
250
306
Fluxa Mini G 20 W, wide beam
Part number
Colour
I (cd/klm)
Lamp
Lampholder
PGJ5
Weight
8 266 142 009
black
Philips CDM-Tm
2.4 kg
8 266 162 009
white
20 W
8 266 152 009
silver grey
Part number
Colour
Lamp
Lampholder
Weight
8 268 147 009
black
General Electric
GU6.5
2.5 kg
8 268 167 009
white
CMH 20 W/
8 268 157 009
silver grey
Osram HCI-TF 20 W
Half beam angle γ
C 0 – 180
C 90 – 270
75°
135°
HIT-TC-CE 20 W
1600 lm
6m
1,0
4m
2m
2,0
2,0
4,0
8,0
C 90 – 270
135°
Part number
Colour
16 m
8268147
8,0
16
8m
12 m
16 m
I (cd/klm)
Lamp
Lampholder
8 269 147 009
black
General Electric
8 269 167 009
white
CMH 35 W/
8 269 157 009
silver grey
Osram HCI-TF 35 W
GU6.5
Weight
2.5 kg
Half beam angle γ
C 0 – 180
C 90 – 270
75°
135°
8m
1,0
2,0
HIT-TC-CE 35 W
3200 lm
90
90
100
8269147
4m
30
4,0
LPH : 3,5 m
2,0
4,0 8,0
4m
Fluxa Mini G LED, wide beam
200
30
2,0
16
300
8m
12 m
16 m
20 m
I (cd/klm)
Part number*
Colour
Light source
Weight
8 280 145 059
black
2.5 kg
8 280 165 059
30
LPH : 3,0 m
4,0
4m
Fluxa Mini G 35 W, wide beam
12 m
2,0
4,0
200
HIT-TC-CE 20 W
1600 lm
1,0
4m
2,0
30
300
8m
6m
2m
8266142
16
Half beam angle γ
75°
90
100
LPH : 3,0 m
4,0
4m
C 0 – 180
90
white
Half beam angle γ
C 0 – 180
C 90 – 270
70°
138°
8m
LED
1405 lm
4.0
4m
LPH : 4.0 m
16
90
8280145050
2.0
4.0 8.0
90
8.0
300
450
600
8 280 155 059
silver grey
10.0 m
uniformity values
Fluxa Mini G LED
218
H
4m
5m
6m
D
20 m
23 m
27 m
D/H
4.5
4.5
4
Eav
6 Lx
5 Lx
4 Lx
Emin/Eav
0.3
0.36
0.34
Fluxa Mini G
Lamps/Light source (see page 364 – 365)
LEDs, replacement module available
HIT-TC-CE
HIT-TC-CE
Accessories for Fluxa Mini
Accessories for Fluxa Mini
60
114
195
Part number
Colour
Description
128 0 086 940
black
Corner fixing bracket B, aluminium, polyester
128 0 086 960
white
powder coated, for mounting floodlights on 90°
128 0 086 950
silver grey
corners
70
120
30
65
65
50
50
78
99
78
78
65
65
30
95
50
50
78
103
62
103
30
99
62
95
Accessories for Fluxa Mini G
95
30
95
78
78
30
43
65
78
Colour
Description
122 0 207 940
black
Pole mount fitter Ø 60mm,
122 0 207 960
white
for one luminaire
122 0 207 950
silver grey
122 0 217 940
black
122 0 217 960
white
for one luminaire
122 0 217 950
silver grey
Part number
Colour
Description
122 0 208 940
black
122 0 208 960
white
for two luminaires
122 0 208 950
silver grey
122 0 218 940
black
122 0 218 960
white
for two luminaires
122 0 218 950
silver grey
Part number
Colour
Description
122 0 209 940
black
Pole adapter
122 0 209 960
white
for one luminaire, for pole diameter 80 – 110 mm
122 0 209 950
silver grey
24
50
Part number
Accessories for Fluxa Mini/Mini G, asymmetrical beam
22
Part number
Description
122 0 210 000
Louvre, internally fitted, to reduce glare
Part number
Description
122 0 211 000
Glare shield, adjustable 16 mm, to prevent glare from light reflected backwards
35
20
155
106
167
20
Accessories for Fluxa Mini/Mini G, wide beam
Part number
Description
122 0 212 000
Glare shield, to prevent glare from direct light from lamp
28
55
Fluxa Mini
219
Fluxa A
Fluxa A
For metal halide lamps (HIT-DE),
ceramic metal halide lamps (HIT-DE-CE),
high pressure sodium lamps (HST-DE) and
halogen lamps (QT-DE 12)
coated, asymmetrical high gloss aluminium reflector,
safety glass, silicon gasket, closure with 4 stainless
aluminium mounting bracket with tilt scale:
4 holes Ø 8.5 mm,spacing 70 mm (120 mm),
2 drilled holes Ø 10 mm, spacing 200 mm, 1
centre hole Ø 22 mm, tilt range 210°, M20 cable
gland, integral LPF ballast and ignitor, HPF
available on request (see page 362),
supplied without lamp
Fluxa A 70 W, asymmetrical beam
I (cd/klm)
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 271 041 009
black
HIT-DE 70 W
Rx7s
60°
8 271 061 009
white
HIT-DE-CE 70 W
8 271 051 009
silver grey
8.5 kg
2m
HIT-DE 70 W
5000 lm
16
32
2m
8,0
16
32
4,0
90
60
8271041
0
HST-DE 70 W
90
30
LPH : 5,0 m
4m
8m
2m
12 m
8271041
0
2m
600
16 m
HST-DE 70W
6800 lm
16
32
300
450
2,0
32
16
32
4,0
8,0
2,0
LPH : 5,0 m
4m
8m
12 m
I (cd/klm)
4m
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 273 041 009
black
HIT-DE 150 W
Rx7s
45°
8 273 061 009
white
HIT-DE-CE 150 W
8 273 051 009
silver grey
HST-DE 150 W
9.0 kg
16 m
16
32
HIT-DE 150 W
11250 lm
90
8273041
0
32
16
32
8,0
4,0
4m
90
60
30
450
2,0
600
LPH : 7,0 m
4m
8m
12 m
4m
20 m
HST-DE 150 W
15000 lm
32
64
16 m
300
8273041
0
32
64
16
8,0
4,0
4m
LPH : 7,0 m
4m
8m
12 m
16 m
20 m
Part number
Description
. . . . . . . 019
Luminaire
in class II version
I (cd/klm)
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 271 040 009
black
QT-DE 12
R7s
60°
8 271 060 009
white
up to 300 W
8 271 050 009
7.0 kg
2m
32
16
QT-DE12 300 W
5300 lm
8271040
0
2m
silver grey
32
32
8,0
16
4,0
2,0
8m
12 m
90
60
30
300
450
1,0
LPH : 5,0 m
4m
90
600
16 m
220
Fluxa A
HIT-DE
HIT-DE-CE
HST-DE
QT-DE 12
10 m
1.0
100
1.0 m
LPH : 6.0
5m
2.0
4.0
4.0
8.0
15.0 m
I (cd/klm)
90
90
HIT-CE 70 W
6600 lm
15 m
1.0
100
10 m
2.0
2.0 4.0
300
8.0
4.0
16
LPH : 6.0 m
1.0
20.0 m
I (cd/klm)
90
HIT-CE 150 W
14000 lm
15 m
1.0
100
10 m
5m
4.0 LPH : 6.0 m
4.0 8.0
300
50
160
16
8.0
32
20.0 m
70
120
200
320
280
Fluxa A 35 W, wide beam
Part number
Colour
Lamp
Lampholder Weight
8 272 045 009
black
HIT-CE 35 W
G12
8 272 065 009
white
8 272 055 009
silver grey
Half beam angle γ
8.3 kg
C 0 –180
C 90 – 270
82°
145°
Part number
Colour
Lamp
Lampholder Weight
8 271 045 009
black
HIT 70 W
G12
8 271 065 009
white
HIT-CE 70 W
8 271 055 009
silver grey
Half beam angle γ
8.5 kg
C 0 – 180
C 90 – 270
82°
145°
Part number
Colour
Lamp
Lampholder Weight
8 273 045 009
black
HIT 150 W
G12
8 273 065 009
white
HIT-CE 150 W
8 273 055 009
silver grey
Half beam angle γ
8273045
2.0
9
380
460
8271045
5m
90
22 11
8272045
2.0
300
0°
HIT-CE 35 W
3300 lm
90
21
I (cd/klm)
90
Fluxa A
Fluxa A, wide beam
For metal halide lamps (HIT),
ceramic metal halide lamps (HIT-CE) and
high pressure sodium lamps (HSE)
coated, high gloss aluminium reflector, all exterior
silicon gasket, closure with 4 stainless steel screws,
hinged front frame, powder coated aluminium
mounting bracket with tilt scale: 4 holes Ø 8.5 mm,
spacing 70 mm (120 mm), 2 drilled holes
Ø 10 mm, spacing 200 mm, 1 centre hole
Ø 22 mm, tilt range 210°, M20 cable gland,
integral LPF ballast and ignitor, HPF available on
request (see page 362), supplied without lamp
9 kg
C 0 –180
C 90 –270
82°
145°
Fluxa A 35/70/150 W, wide beam
Part number
Description
. . . . . . . 019
Luminaire
in class II version
I (cd/klm)
90
90
100
HIT-CE 60 W CP
6900 lm
15 m
10 m
1.0
2.0
2.0
Part number*
Colour
Lamp
Lampholder Weight
8 271 047 009
black
HIT-CE 60 W
PGZ12
8 271 067 009
white
(Philips CosmoPolis)
8 271 057 009
silver grey
Half beam angle γ
8271047
5m
300
4.0 8.0
16
20.0 m
LPH : 6.0
1.0 m
8.5 kg
C 0 –180
C 90 –270
84°
145°
*These luminaires are also available for 45 W, 90 W or 140 W lamps (Philips CosmoPolis) upon request.
Typical illumination levels and uniformity values
HIT / HIT-CE
HIT-CE Philips CosmoPolis
35 W
70 W
150 W
45 W
60 W
90 W
H
5m
6m
8m
5m
6m
8m
D
20 m
24 m
32 m
20 m
24 m
32 m
D/H
4
4
4
4
4
4
Eav
7 Lx
11 Lx
14 Lx
9 Lx
11 Lx
10 Lx
Emin/Eav
0.36
0.38
0.38
0.36
0.38
0.38
HIT
HIT-CE
HIT-CE
Fluxa A
221
Fluxa A LED
Fluxa A LED, wide beam
With high performance LEDs,
integral temperature monitoring device,
coated, all exterior steel parts are stainless steel,
tempered safety glass, silicon gasket, closure with
4 stainless steel screws, hinged front frame, powder
coated aluminium mounting bracket with tilt scale:
4 holes Ø 8.5 mm, spacing 70 mm (120 mm),
2 drilled holes Ø 10 mm, spacing 200 mm,
1 centre hole Ø 22 mm, tilt range 210°,
M20 cable gland, integral converter
21
50
160
0°
70
120
200
11
320
280
22
380
460
Kategorie
9
Fluxa A LED, wide beam, dimmable
I (cd/klm)
Part number*
Colour
Light source
Weight
8 281 045 059
black
7.5 kg
8 281 065 059
white
Half beam angle γ
C 0 –180
C 90 – 270
53°
136°
LED
4291 lm
2.0
10 m
5.0
LPH : 6.0 m
5.0
10
8 281 055 059
silver grey
Colour
8 281 045 359
black
8 281 065 359
white
Light source
Weight
7.5 kg
Half beam angle γ
C 0 – 180
C 90 – 270
53°
136°
LED
4291 lm
2.0
10 m
5.0
8281045350
LPH : 6.0 m
5m
2.0
5.0
8 281 055 359
silver grey
10
15.0 m
uniformity values
Fluxa A LED
H
6m
7m
8m
D
24 m
27 m
32 m
D/H
4
4
4
Eav
9 Lx
7 Lx
5 Lx
Emin/Eav
0.38
0.37
0.36
Light source
222
Fluxa A LED
200
300
15.0 m
Fluxa A LED, wide beam, dimmable 50%
Part number*
90
8281045050
5m
2.0
90
LEDs, replacement modules available
I (cd/klm)
90
90
HIT-DE 250 W
20000 lm
5m
16
32
60
8275040
0
30
64
400
32
8,0
16
32
5m
600
4,0
10 m
15 m
20 m
25 m
32
16
64
30
8276040
0
400
64
600
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 275 040 009
black
HIT-DE 250 W
Fc2
45°
8 275 050 009
silver grey
14.2 kg
30 m
HST-DE 250 W
25500 lm
5m
60
Part number
2,0
I (cd/klm)
90
Fluxa B 250 W, HIT-DE
LPH : 10,0 m
5m
90
Fluxa B
Fluxa B
For metal halide lamps (HIT-DE) and
high pressure sodium lamps (HST-DE)
cast aluminium housing, polyester powder coated,
asymmetrical high gloss aluminium reflector, all
exterior steel parts are stainless steel, tempered
safety glass, silicon gasket, closure wtih 2 stainless
aluminium mounting bracket with tilt scale: 4 drilled
cable gland, integral LPF ballast and ignitor, HPF
available on request (see page 362), supplied
without lamp
32
5m
16
8,0
Fluxa B 250 W, HST-DE
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 276 040 009
black
HST-DE 250 W
Fc2
45°
8 276 050 009
silver grey
14.2 kg
4,0
LPH : 10,0 m
5m
10 m
15 m
20 m
25 m
30 m
HIT-DE
HST-DE
Fluxa B
223
Fluxa B LED
Fluxa B LED, wide beam
safety glass, silicon gasket, closure wtih 2 stainless
1 centre hole Ø 22 mm, tilt range 210°,
0°
22
10,
5
510
615
70
120
200
8,5
390
335
50
185
21
Fluxa B LED,
250 W,
wide
HIT-DE
beam, dimmable
I (cd/klm)
Part number*
number
Colour
Lampsource
Light
Lampholder Weight
Weight
γ γ
Half
Main
beam
beam
angle
angle
8 275 040 009
black
HIT-DE 250 W
Fc2
C45°
0 –180
C 90 – 270
8 282
275 045
050 059
009
silver grey
black
69°
137°
14.2 kg
12.2 kg
90
200
300
8 282 055 059
silver grey
400
Fluxa B LED,
250 W,
wide
HST-DE
beam, dimmable 50%
I (cd/klm)
Part number*
number
Colour
Lampsource
Light
Lampholder Weight
Weight
γ γ
Half
Main
beam
beam
angle
angle
8 276 040 009
black
HST-DE 250 W
Fc2
C45°
0 –180
C 90 – 270
8 282
276 045
050 359
009
silver grey
black
69°
137°
14.2 kg
12.2 kg
90
300
400
uniformity values
Fluxa B LED
H
6m
7m
8m
D
24 m
28 m
32 m
D/H
4
4
4
Eav
14 Lx
11 Lx
8 Lx
Emin/Eav
0.46
0.44
0.43
Light source
Fluxa B LED
90
200
8 282 055 359
silver grey
224
90
I (cd/klm)
90
90
16
32
60
30
HIT 250 W
20000 lm
5m
8,0
8277047
0
300
450
16
32
5m
600
8,0
4,0
10 m
15 m
20 m
32
64
64
16
32
16
25 m
10 m
15 m
20 m
16
4,0
8,0
32
32
16
8,0
4,0
2,0
30 m
450
5,0
8278048
5m
600
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 277 048 009
black
HIT 400 W
E 40
50°
8 277 058 009
silver grey
Lamp operating current
20
Fluxa C 400 W, HIT/ HST
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 278 048 009
black
HIT 400 W
E 40
55°
8 278 058 009
silver grey
HST 400 W
2,0
5,0
10
20 m
30 m
23.2 kg
Lamp operating current
LPH : 15,0 m
10 m
10 m
23.2 kg
up to 3,6 A
1,0
HIT 400 W
42000 lm
10
20
0
300
Fluxa C 400 W, HIT
40 m
10 m
5m
60
HST 250 W
LPH : 15,0 m
20 m
90
30
HIT 400 W
32000 lm
10 m
I (cd/klm)
silver grey
30 m
8277048
10 m
90
25 m
0
5m
55°
8 277 057 009
22.0 kg
30 m
10 m
5m
600
Main beam angle γ
E40
4,0
8,0
90
450
Lampholder Weight
HIT 250 W
LPH : 10,0 m
5m
300
Lamp
black
8277047
5m
30
Colour
8 277 047 009
2,0
0
60
Part number
HST 250W
33000 lm
5m
I (cd/klm)
Fluxa C 250 W, HIT/HST
LPH : 10,0 m
5m
90
Fluxa C
Fluxa C
For metal halide lamps (HIT) and
high pressure sodium lamps (HST)
asymmetrical high gloss aluminium reflector,
2 drilled holes Ø 16.5 mm, spacing 300 mm,
cable gland, integral LPF ballast (250 or 400 W)
and ignitor, HPF ballast available (see page 362),
up to 4,4 A
40 m
10 m
5m
HST 400 W
55000 lm
16
32
8278048
0
5m
8,0
16
32
4,0
LPH : 15,0 m
10 m
10 m
I (cd/klm)
90
100
30
30 m
40 m
10 m
90
60
20 m
64
5m
32
16
HIT 1000 W
80000 lm
8,0
8279047
0
5m
400
125
64
32
16
8,0
Fluxa C 1000 W, HIT/ HST, separate ballast required (see page 226)
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 279 047 009
black
HIT 1000 W
E40
33°
8 279 057 009
silver grey
HST 1000 W
18.8 kg
4,0
LPH : 15,0 m
10 m
10 m
20 m
30 m
40 m
10 m
5m
125
64
32
16
HST 1000 W
130000 lm
8279047
0
5m
125
64
32
16
8,0
4,0
LPH : 15,0 m
10 m
10 m
20 m
30 m
40 m
HIT
HST
Fluxa C
225
Accessories Fluxa A, B and C
Accessories for Fluxa A
Description
black
Corner fixing bracket B, aluminium,
128 0 086 960
white
polyester powder coated,
128 0 086 950
silver grey
for mounting floodlights on 90° corners
195
114
Colour
128 0 086 940
60
Part number
70
120
Accessories for Fluxa A, B
Part number
Colour
Description
120 0 240 940
black
Universal pole clamp, aluminium,
120 0 240 960
white
polyester powder coated, stainless steel bolts,
120 0 240 950
silver grey
for mounting on poles Ø 40 -110 mm
Part number
Colour
Description
128 0 287 940
black
Crossbar, for pole D1= 76 mm,
128 0 287 960
white
for two luminaires,
128 0 287 950
silver grey
hot dip galvanized steel, polyester powder coated
128 0 287 000
unpainted
for two luminaires,
hot dip galvanized steel
128 0 552 940
black
128 0 552 960
white
for two luminaires,
128 0 552 950
silver grey
hot dip galvanized steel, polyester powder coated
128 0 552 000
unpainted
for two luminaires,
hot dip galvanized steel
Accessories for Fluxa A, B, C
Part number
Colour
Description
128 0 232 940
black
Wall plate B, aluminium,
128 0 232 960
white
polyester powder coated, for additional support
128 0 232 950
silver grey
on unstable surfaces
Accessories only for Fluxa A
Part number
Colour
Description
122 0 066 940
black
Louvre, stainless steel, to reduce lateral glare,
122 0 066 960
white
for mounting on front of floodlight
122 0 066 950
silver grey
Ballasts for Fluxa C 1000 W, IP65
Part number
Power factor
Description
118 0 001 009
LPF
Ballast for HIT- and HST-lamps 1000 W
118 0 002 009
HPF
Ballast for HIT-lamps 1000 W
118 0 003 009
HPF
Ballast for HST-lamps 1000 W
Description
232 0 150 000
Glare shield 285 x 85 mm,
continuously adjustable 45mm, to reduce glare from light reflected
backwards
85
Part number
45
Accessories for Fluxa A, Fluxa AG, Fluxa A - with arm, asymmetrical beam
258
Accessories for Fluxa B/Fluxa BG/Fluxa B - with arm
Part number
Description
232 0 116 000
continuously adjustable 45mm, to reduce glare from light reflected
backwards
Accessories for Fluxa C/Fluxa C - with arm
Part number
Description
232 0 117 000
adjustable 35 mm, to prevent glare from light reflected backwards
Description
232 0 166 000
Glare control shield, to prevent glare from direct light from lamp
28
Part number
21
Accessories for Fluxa A/Fluxa AG/Fluxa A - with arm, wide beam
72
226
Fluxa A, B and C
I (cd/klm)
90
90
2m
60
30
HIT-DE 70 W
5000 lm
16
32
8271141
0
300
450
2m
16
32
8,0
4,0
2,0
LPH : 5,0 m
600
4m
8m
2m
12 m
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 271 141 009
black
HIT-DE 70 W
Rx7s
60°
8 271 161 009
white
HIT-DE-CE 70 W
8 271 151 009
silver grey
HST-DE 70 W
8.5 kg
16 m
8271141
0
2m
Fluxa AG 70 W, asymmetrical beam
HST-DE 70W
6800 lm
16
32
Fluxa AG
Fluxa AG
ceramic metal halide lamps (HIT-DE-CE),
high pressure sodium lamps (HST-DE) and
halogen lamps (QT-DE 12)
coated, asymmetrical high gloss aluminium reflector,
assembly: 2 drilled holes Ø 8.5 mm,
spacing 64 mm, 2 drilled holes Ø 8.5 mm,
spacing 56 mm, tilt range 15°, M20 cable gland,
32
16
32
4,0
8,0
2,0
LPH : 5,0 m
4m
I (cd/klm)
90
90
8m
4m
16
32
60
30
12 m
16 m
HIT-DE 150 W
11250 lm
8273141
0
300
450
32
16
32
8,0
4,0
4m
600
2,0
LPH : 7,0 m
4m
8m
12 m
2m
32
125
16 m
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 273 141 009
black
HIT-DE 150 W
Rx7s
45°
8 273 161 009
white
HIT-DE-CE 150 W
8 273 151 009
silver grey
HST-DE 150 W
9.0 kg
20 m
HST-DE 150 W
15000 lm
8273141
0
125
2m
32
16
8,0
4,0
LPH : 5,0 m
4m
8m
12 m
16 m
Part number
Description
. . . . . . . 019
Luminaire
in class II version
I (cd/klm)
90
90
2m
60
30
300
450
16
32
QT-DE12 300 W
5300 lm
8271140
0
2m
32
8,0
16
32
4,0
2,0
1,0
LPH : 5,0 m
600
4m
8m
12 m
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 271 140 009
black
QT-DE 12
R7s
60°
8 271 160 009
white
up to 300 W
8 271 150 009
silver grey
7.0 kg
16 m
Accessories for Fluxa A
Description
232 0 150 000
Glare shield, adjustable 45 mm, to prevent glare from light reflected backwards
85
45
Part number
258
HIT-DE
HIT-DE-CE
HST-DE
QT-DE 12
Fluxa AG
227
Fluxa AG
Fluxa AG, wide beam
For metal halide lamps (HIT),
ceramic metal halide lamps (HIT-CE),
coated, high gloss aluminium reflector, all exterior
silicon gasket, closure with 4 stainless steel screws,
hinged front frame, adjustable bracket assembly:
2 drilled holes Ø 8.5 mm, spacing 56 mm, tilt
range 15°, M20 cable gland, integral LPF ballast
and ignitor, HPF available on request
(see page 362), supplied without lamp
58
160
15°
64
56
8,5
280
100
380
470
Fluxa AG 35 W, wide beam
Part number
Colour
8 272 145 009
black
8 272 165 009
white
8 272 155 009
silver grey
I (cd/klm)
Lamp
Lampholder
HIT-CE 35 W
G12
Weight
8.5 kg
Half beam angle γ
C 0 – 180
C 90 – 270
82°
145°
90
8272145
2.0
90
100
1.0 m
LPH : 6.0
5m
4.0
4.0
8.0
300
15.0 m
Colour
I (cd/klm)
Lamp
8 271 145 009
black
HIT 70 W
8 271 165 009
white
HIT-CE 70 W
8 271 155 009
silver grey
Lampholder
G12
Weight
8.5 kg
Half beam angle γ
C 0 – 180
C 90 – 270
82°
145°
HIT-CE 70 W
6600 lm
15 m
1.0
10 m
90
8.0
4.0
16
90
100
8271145
2.0
5m
2.0 4.0
LPH : 6.0 m
1.0
300
20.0 m
Part number
1.0
2.0
Part number
HIT-CE 35 W
3300 lm
10 m
Colour
I (cd/klm)
Lamp
8 273 145 009
black
HIT 150 W
8 273 165 009
white
HIT-CE 150 W
8 273 155 009
silver grey
Lampholder
G12
Weight
9 kg
Half beam angle γ
C 0 – 180
C 90 – 270
82°
145°
HIT-CE 150 W
14000 lm
15 m
1.0
10 m
5m
90
8273145
4.0 LPH : 6.0 m
2.0
4.0 8.0
16
90
100
8.0
32
300
20.0 m
Fluxa AG 35/70/150 W, wide beam
Part number
Description
. . . . . . . 019
Luminaire
in class II version
Part number*
Colour
I (cd/klm)
Lamp
Lampholder
8 271 147 009
black
HIT-CE 60 W
PGZ12
8 271 167 009
white
8 271 157 009
silver grey
Weight
8.5 kg
Half beam angle γ
C 0 – 180
C 90 – 270
84°
145°
HIT-CE 60 W CP
6900 lm
15 m
10 m
1.0
90
8271147
2.0
LPH : 6.0
1.0 m
5m
2.0
4.0 8.0
16
300
20.0 m
HIT / HIT-CE
35 W
70 W
150 W
45 W
60 W
90 W
H
5m
6m
8m
5m
6m
8m
D
20 m
24 m
32 m
20 m
24 m
32 m
D/H
4
4
4
4
4
4
Eav
7 Lx
11 Lx
14 Lx
9 Lx
11 Lx
10 Lx
Emin/Eav
0.36
0.38
0.38
0.36
0.38
0.38
228
Fluxa AG
90
100
HIT
HIT-CE
HSE
Fluxa AG LED
Fluxa AG LED, wide beam
coated, all exteriorsteel parts are stainless steel,
4 stainless steel screws, hinged front frame,
adjustable bracket assembly:
range 15°, M20 cable gland, integral converter
58
160
15°
64
56
8,
5
280
100
380
470
I (cd/klm)
90
LED
4291 lm
90
2.0
10 m
5.0
200
2.0
300
5.0
10
LED
4291 lm
2.0
5.0
2.0
5.0
10
15.0 m
Light source
Weight
C 0 – 180
C 90 – 270
8 281 145 059
black
7.5 kg
53°
136°
8 281 165 059
white
Half beam angle γ
Fluxa AG LED, wide beam, dimmable 50%
Part number*
Colour
Light source
Weight
8 281 145 359
black
7.5 kg
8 281 165 359
white
8281345350
LPH : 6.0 m
5m
Colour
8 281 155 059
silver grey
15.0 m
10 m
Half beam angle γ
Part number*
8281145050
LPH : 6.0 m
5m
Fluxa AG LED, wide beam, dimmable
C 0 – 180
C 90 – 270
53°
136°
8 281 155 359
silver grey
Accessories for Fluxa AG LED (see page 231)
uniformity values
Fluxa AG LED
H
6m
7m
8m
D
24 m
27 m
32 m
D/H
4
4
4
Eav
9 Lx
7 Lx
5 Lx
Emin/Eav
0.38
0.37
0.36
Light source
Fluxa AG LED
229
Fluxa BG
Fluxa BG
assembly: 2 drilled holes Ø 8.5 mm, spacing
64 mm, 2 drilled holes Ø 8.5 mm, spacing
56 mm, tilt range 15°, M20 cable gland,
Fluxa BG 250 W, HIT-DE
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 275 140 009
black
HIT-DE 250 W
Fc2
45°
8 275 150 009
silver grey
14.0 kg
8275140
0
Fluxa BG 250 W, HST-DE
black
silver grey
16
32
60
8,0
4,0
10 m
15 m
20 m
400
2,0
600
LPH : 10,0 m
Lamp
HST-DE 250 W
Lampholder Weight
Fc2
14.0 kg
Main beam angle γ
25 m
30 m
45°
HST-DE 250 W
25500 lm
5m
32
8276140
16
8,0
Colour
Description
black
Pole top fitter for pole Ø 60 mm
127 0 181 960
white
for one luminaire
127 0 181 950
silver grey
127 0 081 940
black
127 0 081 960
white
for one luminaire
127 0 081 950
silver grey
Part number
Colour
Description
127 0 182 940
black
127 0 182 960
white
for two luminaires
127 0 182 950
silver grey
127 0 082 940
black
127 0 082 960
white
for two luminaires
127 0 082 950
silver grey
Part number
Colour
Lamp
122 0 134 940
black
Wall plate G*, for one luminaire Fluxa AG, BG, aluminium,
122 0 134 960
white
polyester powder coated, for additional support on unstable surfaces
122 0 134 950
silver grey
15 m
20 m
* Without the wall plate, stable installation is only possible on hard surfaces, e.g. metal. For installation on all
normal surfaces, e.g. masonry, brick walls etc., the wall plate should be used.
Accessories only for Fluxa BG
Part number
Description
232 0 116 000
Glare shield 322 x 85 mm
Fluxa BG
HIT-DE
4,0
LPH : 10,0 m
10 m
Accessories for Fluxa AG and BG
127 0 181 940
90
60
30
32
5m
Part number
90
16
0
5m
230
90
I (cd/klm)
Colour
8 276 150 009
I (cd/klm)
90
30
32
5m
8 276 140 009
16
32
5m
Part number
HIT-DE 250 W
20000 lm
5m
HST-DE
25 m
30 m
400
600
Fluxa BG LED
Fluxa BG LED, wide beam
4 stainless steel screws, hinged front frame,
adjustable bracket assembly:
range 15°, M20 cable gland, integral converter
58
185
15°
64
56
8,5
335
100
510
600
Fluxa BG LED, wide beam, dimmable
Half beam angle γ
Part number*
Colour
Light source
Weight
C 0 –180
C 90 – 270
8 282 145 059
black
12.0 kg
69°
137°
8 282 155 059
silver grey
Half beam angle γ
Fluxa BG LED, wide beam, dimmable 50%
Part number*
Colour
Light source
Weight
8 282 145 359
black
12.0 kg
8 282 155 359
silver grey
C 0 – 180
C 90 – 270
69°
137°
Accessories for Fluxa AG LED and BG LED
Part number
Colour
Description
127 0 181 940
black
127 0 181 960
white
for one luminaire
127 0 181 950
silver grey
127 0 081 940
black
127 0 081 960
white
for one luminaire
127 0 081 950
silver grey
Part number
Colour
Description
127 0 182 940
black
127 0 182 960
white
for two luminaires
127 0 182 950
silver grey
127 0 082 940
black
127 0 082 960
white
for two luminaires
127 0 082 950
silver grey
Part number
Colour
Lamp
122 0 134 940
black
Wall plate G*, for one luminaire Fluxa AG, BG, aluminium,
122 0 134 960
white
122 0 134 950
silver grey
uniformity values
Fluxa BG LED
H
6m
7m
8m
D
24 m
28 m
32 m
D/H
4
4
4
Eav
14 Lx
11 Lx
8 Lx
Emin/Eav
0.46
0.44
0.43
Light source
Fluxa BG LED
231
Fluxa AGU Uplight
Fluxa AGU Uplight
ceramic metal halide lamps (HIT-DE-CE) and
56 mm, tilt range 30°, M20 cable gland, integral
LPF ballast and ignitor, HPF available on request
Fluxa AGU Uplight 150 W
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 273 241 009
black
HIT-DE 150 W
Rx7s
45°
8 273 261 009
white
HIT-DE-CE 150 W
8 273 251 009
silver grey
HST-DE 150 W
9.0 kg
Calculation example for indirect
lighting using 3 nos. Fluxa AGU
HIT-DE 150 W:
Ceiling height: 5 m
Luminaire installation height: 3 m
Ceiling reflectance value: 80%
Average illuminance at floor level: 40 lx.
Uniformity: 0.53
I (cd/klm)
600
450
300
135
105
105
75
75
Accessories only for Fluxa AGU Uplight
Part number
Description
232 0 150 000
Glare shield,
85
45
258
232
Fluxa AGU Uplight
HIT-DE
HIT-DE-CE
HST-DE
I (cd/klm)
600
400
135
105
105
75
75
Calculation example for indirect
lighting using 3 nos. Fluxa
BGU 250 W:
Ceiling height: 5 m
Luminaire installation height: 3 m
Ceiling reflectance value: 80%
Average illuminance at floor level: 60 lx.
Uniformity: 0.53
Fluxa BGU Uplight
Fluxa BGU Uplight
56 mm, tilt range 30°, cable gland M20, integral
LPF ballast and ignitor, HPF available on request
Fluxa BGU Uplight 250 W, HIT-DE
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 275 240 009
black
HIT-DE 250 W
Fc2
45°
8 275 250 009
silver grey
14.0 kg
Fluxa BGU Uplight 250 W, HST-DE
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 276 240 009
black
HST-DE 250 W
Fc2
45°
8 276 250 009
silver grey
14.0 kg
Accessories only for Fluxa BGU Uplight
Part number
Description
232 0 116 000
Glare shield,
HIT
HST
Fluxa BGU Uplight
233
160
Fluxa A - with arm
Fluxa A - with arm
For metal halide lamps (HIT-DE)
Ceramic metal halide lamps (HIT-DE-CE)
High pressure sodium lamp (HST-DE) and
Halogen lamps (QT-DE 12)
coated, asymmetrical high gloss aluminium
reflector, all exterior steel parts are stainless steel,
4 stainless steel screws, hinged front frame, 230 mm
arm, 2 drilled holes Ø 10.5, spacing 58 mm,
M20 cable gland, integral LPF ballast and ignitor,
HPF available on request (see page 362),
280
58
10,5
380
600
Fluxa A - with arm 70 W, asymmetrical beam
I (cd/klm)
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 271 341 009
black
HIT-DE 70 W
Rx7s
60°
8 271 361 009
white
HIT-DE-CE 70 W
8 271 351 009
silver grey
9.0 kg
2m
90
8,0
16
32
4,0
90
60
8271341
0
2m
HST-DE 70 W
HIT-DE 70 W
5000 lm
16
32
30
LPH : 5,0 m
4m
8m
2m
12 m
8271341
0
2m
600
16 m
HST-DE 70W
6800 lm
16
32
300
450
2,0
32
16
32
4,0
8,0
2,0
LPH : 5,0 m
4m
8m
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 273 341 009
black
HIT-DE 150 W
Rx7s
45°
8 273 361 009
white
HIT-DE-CE 150 W
8 273 351 009
silver grey
HST-DE 150 W
9.5 kg
16 m
I (cd/klm)
4m
Part number
12 m
HIT-DE 150 W
11250 lm
32
64
90
8273341
0
64
16
32
8,0
90
60
30
450
4,0
4m
600
LPH : 7,0 m
4m
8m
12 m
4m
16 m
20 m
HST-DE 150 W
16
15000 lm
32
64
300
8273341
0
32
64
16
8,0
4,0
4m
LPH : 7,0 m
4m
8m
12 m
16 m
20 m
Part number
Description
. . . . . . . 019
Luminaire
in class II version
I (cd/klm)
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 271 340 009
black
QT-DE 12
R7s
60°
8 271 360 009
white
up to 300 W
8 271 350 009
7.5 kg
silver grey
2m
32
16
QT-DE12 300 W
8,0
5300 lm
8271340
0
2m
32
32
16
8,0
4,0
2,0
8m
12 m
90
60
30
300
450
1,0
LPH : 5,0 m
4m
90
600
16 m
Accessories for Fluxa A - with arm
Part number
Description
232 0 150 000
85
45
continuously adjustable 45 mm, to reduce glare from light reflected backwards
258
234
Fluxa A - with arm
HIT-DE
HIT-DE-CE
HST-DE
QT-DE 12
160
58
Fluxa A - with arm
Fluxa A - with arm, wide beam
For metal halide lamps (HIT-DE)
Ceramic metal halide lamps (HIT-DE-CE)
Protection class I, IP65
Windage area AW 0.11m²
coated, wide beam high gloss aluminium reflector,
steel screws, hinged front frame, 230 mm arm, 2
drilled holes ø 10.5, spacing 58mm, M20 cable
gland, integral LPF ballast and ignitor,
280
10,5
380
600
I (cd/klm)
90
HIT-CE 35 W
3300 lm
90
10 m
100
1.0
2.0
5m
2.0 4.0
300
8272345
1.0 m
LPH : 6.0
8.0
15.0 m
I (cd/klm)
90
90
100
HIT-CE 70 W
6600 lm
15 m
1.0
10 m
2.0 LPH : 6.0 m
1.0
2.0
4.0 8.0
16
20.0 m
I (cd/klm)
90
90
HIT-CE 150 W
14000 lm
15 m
1.0
100
10 m
Colour
Lamp
Lampholder Weight
8 272 345 009
black
HIT-CE 35 W
G12
8 272 365 009
white
8 272 355 009
silver grey
Half beam angle γ
9.0 kg
LPH : 6.0 m
4.0
4.0
300
8.0 16
32
20.0 m
C 0 – 180
C 90 – 270
82°
145°
Fluxa A - with arm 70 W, wide beam
Part number
Colour
Lamp
Lampholder Weight
8 271 345 009
black
HIT 70 W
G12
8 271 365 009
white
HIT-CE 70 W
8 271 355 009
silver grey
Half beam angle γ
9.0 kg
C 0 – 180
C 90 – 270
82°
145°
Part number
Colour
Lamp
Lampholder Weight
8 273 345 009
black
HIT 150 W
G12
8 273 365 009
white
HIT-CE 150 W
8 273 355 009
silver grey
Half beam angle γ
8273345
2.0
5m
Part number
8271345
5m
300
9.5 kg
C 0 – 180
C 90 – 270
82°
145°
Fluxa A - with arm 35/70/150 W, wide beam
Part number
Description
. . . . . . . 019
Luminaire
in class II version
I (cd/klm)
90
90
100
HIT-CE 60 W CP
6900 lm
15 m
10 m
1.0
Part number*
Colour
Lamp
Lampholder Weight
8 271 347 009
black
HIT-CE 60 W
PGZ12
8 271 367 009
white
8 271 357 009
silver grey
Half beam angle γ
8271347
2.0
5m
2.0
4.0 8.0
16
300
20.0 m
LPH : 6.0
1.0 m
9.0 kg
C 0 – 180
C 90 – 270
84°
145°
HIT / HIT-CE
35 W
70 W
150 W
45 W
60 W
90 W
H
5m
6m
8m
5m
6m
8m
D
20 m
24 m
32 m
20 m
24 m
32 m
D/H
4
4
4
4
4
4
Eav
7 Lx
11 Lx
14 Lx
9 Lx
11 Lx
10 Lx
Emin/Eav
0.36
0.38
0.38
0.36
0.38
0.38
HIT
HIT-CE
HIT-CE
Fluxa A - with arm
235
58
200
160
Fluxa A LED - with arm
Fluxa A LED - with arm, wide beam
Protection class I, IP65
Windage area AW 0,11 m2
tempered safety glass, silicon gasket, closure with 4
stainless steel screws, hinged front frame, 230 mm
arm, 2 drilled holes ø 10.5, spacing 58mm, M20
cable gland, integral converter
100
280
10,5
380
600
Fluxa A LED - with arm, wide beam, dimmable
I (cd/klm)
Part number*
Colour
Light source
Weight
8 281 345 059
black
8.0 kg
8 281 365 059
white
Half beam angle γ
C 0 –180
C 90 – 270
53°
136°
LED
4291 lm
2.0
10 m
5.0
LPH : 6.0 m
5.0
10
8 281 355 059
silver grey
Fluxa A LED - with arm, wide beam, dimmable 50%
Part number*
Colour
8 281 345 359
black
8 281 365 359
white
Weight
8.0 kg
Half beam angle γ
C 0 – 180
C 90 – 270
53°
136°
LED
4291 lm
2.0
10 m
5.0
8281345350
LPH : 6.0 m
5m
2.0
5.0
8 281 355 359
silver grey
10
15.0 m
uniformity values
H
6m
7m
8m
D
24 m
27 m
32 m
D/H
4
4
4
Eav
9 Lx
7 Lx
5 Lx
Emin/Eav
0.38
0.37
0.36
Light source
236
200
300
15.0 m
Light source
90
8281345050
5m
2.0
90
I (cd/klm)
90
90
HIT-DE 250 W
20000 lm
5m
16
32
60
30
8275145
0
400
32
16
32
5m
600
8,0
4,0
10 m
15 m
20 m
25 m
16
60
8276145
0
400
600
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 275 145 009
black
HIT-DE 250 W
Fc2
45°
8 275 155 009
silver grey
14 kg
30 m
HST-DE 250 W
25500 lm
5m
32
30
Part number
2,0
I (cd/klm)
90
Fluxa B - with arm 250 W, HIT-DE
LPH : 10,0 m
5m
90
Fluxa B - with arm
Fluxa B - with arm
steel screws, hinged front frame, arm 230 mm,
M20 cable gland, integral LPF ballast and ignitor,
32
5m
16
8,0
Fluxa B - with arm 250 W, HST-DE
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 276 145 009
black
HST-DE 250 W
Fc2
45°
8 276 155 009
silver grey
14 kg
4,0
LPH : 10,0 m
5m
10 m
15 m
20 m
25 m
30 m
Accessories for Fluxa B - with arm and C – with arm
Part number
Colour
Description
122 0 133 940
black
Wall plate C*, for one luminaire Fluxa BA, CA, aluminium,
122 0 133 950
silver grey
Ballasts for Fluxa C - with arm 1000 W, IP65
Part number
Power factor
Description
118 0 001 009
LPF
Ballast for HIT- and HST-lamps 1000 W
118 0 002 009
HPF
Ballast for HIT-lamps 1000 W
118 0 003 009
HPF
Ballast for HST-lamps 1000 W
Accessories only for Fluxa B - with arm
Part number
Description
232 0 116 000
Glare shield,
HIT-DE
HST-DE
Fluxa B - with arm
237
200
185
58
Fluxa B - with arm
Fluxa B LED - with arm, wide beam
windage area AW 0,19 m2
10,5
335
510
730
Fluxa B LED - with arm, wide beam, dimmable
I (cd/klm)
Part number*
Colour
Light source
Weight
8 282 345 059
black
12.0 kg
8 282 355 059
silver grey
90
Half beam angle γ
C 0 –180
C 90 – 270
69°
137°
200
300
400
Fluxa B LED - with arm, wide beam, dimmable 50%
Part number
Colour
Light source
Weight
8 282 345 359
black
12.0 kg
8 282 355 359
silver grey
Half beam angle γ
C 0 – 180
C 90 – 270
69°
137°
Accessories for Fluxa B LED - with arm and C – with arm
Part number
Colour
Description
122 0 133 940
black
Wall plate C*, for one luminaire Fluxa BA, CA, aluminium,
122 0 133 950
silver grey
uniformity values
Fluxa B LED - Ausleger
H
6m
7m
8m
D
24 m
28 m
32 m
D/H
4
4
4
Eav
14 Lx
11 Lx
8 Lx
Emin/Eav
0.46
0.44
0.43
Light source
238
Fluxa B - with arm
90
Fluxa C - with arm
Fluxa C - with arm
For metal halide lamps (HIT) and
high pressure sodium lamps (HST)
safety glass, silicon gasket, closure with 4 stainless,
cable gland M20, integral LPF ballast (400 W)
and ignitor, HPF ballast available (see page 362),
400 W
1000 W
I (cd/klm)
90
90
10 m
60
30
8277148
450
5m
600
10 m
32
32
16
I (cd/klm)
90
20 m
4,0
2,0
30 m
1,0
40 m
10 m
16
5m
60
8,0
8,0
4,0
450
5m
600
10 m
8278148
32
16
8,0
4,0
2,0
60
5m
20 m
50
100
100
30
30 m
40 m
Lampholder Weight
Main beam angle γ
HIT 400 W
E40
50°
8 277 158 009
silver grey
lamp operating
10
8279147
100
50
100
20
current up to 3.6 A
Fluxa C - with arm 400 W, HIT/HST, lamp operating current up to 4,4 A
Part number
Colour
Lamp
Lampholder Weight
Main beam angle γ
8 278 148 009
black
HIT 400 W, HST 400 W
E40
55°
8 278 158 009
silver grey
lamp operating
LPH : 15,0 m
5m
10 m
15 m
20 m
25 m
23.0 kg
current up to 4.4 A
Fluxa C - with arm 1000 W, HIT/HST, separate ballast required (see page 237)
Part number
Colour
Lamp
8 279 147 009
black
HIT 1000 W, HST 1000 W E40
Lampholder Weight
8 279 157 009
silver grey
18.6 kg
Main beam angle γ
33°
5,0
10
400
23.0 kg
50 m
HIT 1000 W
80000 lm
20
0
5m
Lamp
black
1,0
I (cd/klm)
90
Colour
8 277 148 009
LPH : 15,0 m
10 m
90
Part number
50 m
HIT 400 W
32000 lm
0
300
Fluxa C - with arm 400 W, HIT, lamp operating current up to 3.6 A
LPH : 15,0 m
10 m
30
HIT 400 W
32000 lm
4,0
0
300
90
8,0
16
5m
30 m
Glare shield (see page 226)
35 m 40 m
I (cd/klm)
90
90
60
5m
100
100
30
50
20
HST 1000 W
130000 lm
8279147
0
5m
200
100
50
20
10
LPH : 15,0 m
400
5m
10 m
15 m
20 m
25 m
30 m
35 m 40 m
Accessories for Fluxa A -, B - and C - with arm
Part number (Ø 76 mm)
Part number (Ø 89 mm)
Colour
Version
122 0 141 940
122 0 151 940
black
for 1
122 0 141 950
122 0 151 950
silver grey luminaire
122 0 142 940
122 0 152 940
black
122 0 142 950
122 0 152 950
silver grey luminaires
122 0 143 940
122 0 153 940
black
122 0 143 950
122 0 153 950
122 0 144 940
122 0 154 940
black
122 0 144 950
122 0 154 950
for 2
for 3
Description
Pole top fitter*
aluminium,
polyester powder
coated, for poles
Ø 76 and Ø 89 mm
for 4
* The choice of pole must be negotiated with the pole manufacturer and depends on the maximum permissible
load of the pole in question. If necessary, a reducer should be used.
HIT
HST
Fluxa C - with arm
239

Fluxa Area floodlights for high pressure discharge lamps and

Transcription

Similar documents

Fluxa A LED

Medium-base Lampholders